| /* |
| * |
| * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-event.h> |
| |
| #include "saa7134-reg.h" |
| #include "saa7134.h" |
| |
| /* ------------------------------------------------------------------ */ |
| |
| MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); |
| MODULE_LICENSE("GPL"); |
| |
| static unsigned int empress_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET }; |
| |
| module_param_array(empress_nr, int, NULL, 0444); |
| MODULE_PARM_DESC(empress_nr,"ts device number"); |
| |
| static unsigned int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug,"enable debug messages"); |
| |
| #define dprintk(fmt, arg...) if (debug) \ |
| printk(KERN_DEBUG "%s/empress: " fmt, dev->name , ## arg) |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int start_streaming(struct vb2_queue *vq, unsigned int count) |
| { |
| struct saa7134_dmaqueue *dmaq = vq->drv_priv; |
| struct saa7134_dev *dev = dmaq->dev; |
| u32 leading_null_bytes = 0; |
| int err; |
| |
| err = saa7134_ts_start_streaming(vq, count); |
| if (err) |
| return err; |
| |
| /* If more cards start to need this, then this |
| should probably be added to the card definitions. */ |
| switch (dev->board) { |
| case SAA7134_BOARD_BEHOLD_M6: |
| case SAA7134_BOARD_BEHOLD_M63: |
| case SAA7134_BOARD_BEHOLD_M6_EXTRA: |
| leading_null_bytes = 1; |
| break; |
| } |
| saa_call_all(dev, core, init, leading_null_bytes); |
| /* Unmute audio */ |
| saa_writeb(SAA7134_AUDIO_MUTE_CTRL, |
| saa_readb(SAA7134_AUDIO_MUTE_CTRL) & ~(1 << 6)); |
| dev->empress_started = 1; |
| return 0; |
| } |
| |
| static void stop_streaming(struct vb2_queue *vq) |
| { |
| struct saa7134_dmaqueue *dmaq = vq->drv_priv; |
| struct saa7134_dev *dev = dmaq->dev; |
| |
| saa7134_ts_stop_streaming(vq); |
| saa_writeb(SAA7134_SPECIAL_MODE, 0x00); |
| msleep(20); |
| saa_writeb(SAA7134_SPECIAL_MODE, 0x01); |
| msleep(100); |
| /* Mute audio */ |
| saa_writeb(SAA7134_AUDIO_MUTE_CTRL, |
| saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6)); |
| dev->empress_started = 0; |
| } |
| |
| static struct vb2_ops saa7134_empress_qops = { |
| .queue_setup = saa7134_ts_queue_setup, |
| .buf_init = saa7134_ts_buffer_init, |
| .buf_prepare = saa7134_ts_buffer_prepare, |
| .buf_queue = saa7134_vb2_buffer_queue, |
| .wait_prepare = vb2_ops_wait_prepare, |
| .wait_finish = vb2_ops_wait_finish, |
| .start_streaming = start_streaming, |
| .stop_streaming = stop_streaming, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int empress_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| if (f->index != 0) |
| return -EINVAL; |
| |
| strlcpy(f->description, "MPEG TS", sizeof(f->description)); |
| f->pixelformat = V4L2_PIX_FMT_MPEG; |
| f->flags = V4L2_FMT_FLAG_COMPRESSED; |
| return 0; |
| } |
| |
| static int empress_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct saa7134_dev *dev = video_drvdata(file); |
| struct v4l2_mbus_framefmt mbus_fmt; |
| |
| saa_call_all(dev, video, g_mbus_fmt, &mbus_fmt); |
| |
| v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; |
| f->fmt.pix.bytesperline = 0; |
| |
| return 0; |
| } |
| |
| static int empress_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct saa7134_dev *dev = video_drvdata(file); |
| struct v4l2_mbus_framefmt mbus_fmt; |
| |
| v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, MEDIA_BUS_FMT_FIXED); |
| saa_call_all(dev, video, s_mbus_fmt, &mbus_fmt); |
| v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); |
| |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; |
| f->fmt.pix.bytesperline = 0; |
| |
| return 0; |
| } |
| |
| static int empress_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct saa7134_dev *dev = video_drvdata(file); |
| struct v4l2_mbus_framefmt mbus_fmt; |
| |
| v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, MEDIA_BUS_FMT_FIXED); |
| saa_call_all(dev, video, try_mbus_fmt, &mbus_fmt); |
| v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); |
| |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; |
| f->fmt.pix.bytesperline = 0; |
| |
| return 0; |
| } |
| |
| static const struct v4l2_file_operations ts_fops = |
| { |
| .owner = THIS_MODULE, |
| .open = v4l2_fh_open, |
| .release = vb2_fop_release, |
| .read = vb2_fop_read, |
| .poll = vb2_fop_poll, |
| .mmap = vb2_fop_mmap, |
| .unlocked_ioctl = video_ioctl2, |
| }; |
| |
| static const struct v4l2_ioctl_ops ts_ioctl_ops = { |
| .vidioc_querycap = saa7134_querycap, |
| .vidioc_enum_fmt_vid_cap = empress_enum_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = empress_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = empress_s_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = empress_g_fmt_vid_cap, |
| .vidioc_reqbufs = vb2_ioctl_reqbufs, |
| .vidioc_querybuf = vb2_ioctl_querybuf, |
| .vidioc_qbuf = vb2_ioctl_qbuf, |
| .vidioc_dqbuf = vb2_ioctl_dqbuf, |
| .vidioc_streamon = vb2_ioctl_streamon, |
| .vidioc_streamoff = vb2_ioctl_streamoff, |
| .vidioc_g_frequency = saa7134_g_frequency, |
| .vidioc_s_frequency = saa7134_s_frequency, |
| .vidioc_g_tuner = saa7134_g_tuner, |
| .vidioc_s_tuner = saa7134_s_tuner, |
| .vidioc_enum_input = saa7134_enum_input, |
| .vidioc_g_input = saa7134_g_input, |
| .vidioc_s_input = saa7134_s_input, |
| .vidioc_s_std = saa7134_s_std, |
| .vidioc_g_std = saa7134_g_std, |
| .vidioc_querystd = saa7134_querystd, |
| .vidioc_log_status = v4l2_ctrl_log_status, |
| .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, |
| .vidioc_unsubscribe_event = v4l2_event_unsubscribe, |
| }; |
| |
| /* ----------------------------------------------------------- */ |
| |
| static struct video_device saa7134_empress_template = { |
| .name = "saa7134-empress", |
| .fops = &ts_fops, |
| .ioctl_ops = &ts_ioctl_ops, |
| |
| .tvnorms = SAA7134_NORMS, |
| }; |
| |
| static void empress_signal_update(struct work_struct *work) |
| { |
| struct saa7134_dev* dev = |
| container_of(work, struct saa7134_dev, empress_workqueue); |
| |
| if (dev->nosignal) { |
| dprintk("no video signal\n"); |
| } else { |
| dprintk("video signal acquired\n"); |
| } |
| } |
| |
| static void empress_signal_change(struct saa7134_dev *dev) |
| { |
| schedule_work(&dev->empress_workqueue); |
| } |
| |
| static bool empress_ctrl_filter(const struct v4l2_ctrl *ctrl) |
| { |
| switch (ctrl->id) { |
| case V4L2_CID_BRIGHTNESS: |
| case V4L2_CID_HUE: |
| case V4L2_CID_CONTRAST: |
| case V4L2_CID_SATURATION: |
| case V4L2_CID_AUDIO_MUTE: |
| case V4L2_CID_AUDIO_VOLUME: |
| case V4L2_CID_PRIVATE_INVERT: |
| case V4L2_CID_PRIVATE_AUTOMUTE: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static int empress_init(struct saa7134_dev *dev) |
| { |
| struct v4l2_ctrl_handler *hdl = &dev->empress_ctrl_handler; |
| struct vb2_queue *q; |
| int err; |
| |
| dprintk("%s: %s\n",dev->name,__func__); |
| dev->empress_dev = video_device_alloc(); |
| if (NULL == dev->empress_dev) |
| return -ENOMEM; |
| *(dev->empress_dev) = saa7134_empress_template; |
| dev->empress_dev->v4l2_dev = &dev->v4l2_dev; |
| dev->empress_dev->release = video_device_release; |
| dev->empress_dev->lock = &dev->lock; |
| snprintf(dev->empress_dev->name, sizeof(dev->empress_dev->name), |
| "%s empress (%s)", dev->name, |
| saa7134_boards[dev->board].name); |
| v4l2_ctrl_handler_init(hdl, 21); |
| v4l2_ctrl_add_handler(hdl, &dev->ctrl_handler, empress_ctrl_filter); |
| if (dev->empress_sd) |
| v4l2_ctrl_add_handler(hdl, dev->empress_sd->ctrl_handler, NULL); |
| if (hdl->error) { |
| video_device_release(dev->empress_dev); |
| return hdl->error; |
| } |
| dev->empress_dev->ctrl_handler = hdl; |
| |
| INIT_WORK(&dev->empress_workqueue, empress_signal_update); |
| |
| q = &dev->empress_vbq; |
| q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| /* |
| * Do not add VB2_USERPTR: the saa7134 DMA engine cannot handle |
| * transfers that do not start at the beginning of a page. A USERPTR |
| * can start anywhere in a page, so USERPTR support is a no-go. |
| */ |
| q->io_modes = VB2_MMAP | VB2_READ; |
| q->drv_priv = &dev->ts_q; |
| q->ops = &saa7134_empress_qops; |
| q->gfp_flags = GFP_DMA32; |
| q->mem_ops = &vb2_dma_sg_memops; |
| q->buf_struct_size = sizeof(struct saa7134_buf); |
| q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| q->lock = &dev->lock; |
| err = vb2_queue_init(q); |
| if (err) |
| return err; |
| dev->empress_dev->queue = q; |
| |
| video_set_drvdata(dev->empress_dev, dev); |
| err = video_register_device(dev->empress_dev,VFL_TYPE_GRABBER, |
| empress_nr[dev->nr]); |
| if (err < 0) { |
| printk(KERN_INFO "%s: can't register video device\n", |
| dev->name); |
| video_device_release(dev->empress_dev); |
| dev->empress_dev = NULL; |
| return err; |
| } |
| printk(KERN_INFO "%s: registered device %s [mpeg]\n", |
| dev->name, video_device_node_name(dev->empress_dev)); |
| |
| empress_signal_update(&dev->empress_workqueue); |
| return 0; |
| } |
| |
| static int empress_fini(struct saa7134_dev *dev) |
| { |
| dprintk("%s: %s\n",dev->name,__func__); |
| |
| if (NULL == dev->empress_dev) |
| return 0; |
| flush_work(&dev->empress_workqueue); |
| video_unregister_device(dev->empress_dev); |
| vb2_queue_release(&dev->empress_vbq); |
| v4l2_ctrl_handler_free(&dev->empress_ctrl_handler); |
| dev->empress_dev = NULL; |
| return 0; |
| } |
| |
| static struct saa7134_mpeg_ops empress_ops = { |
| .type = SAA7134_MPEG_EMPRESS, |
| .init = empress_init, |
| .fini = empress_fini, |
| .signal_change = empress_signal_change, |
| }; |
| |
| static int __init empress_register(void) |
| { |
| return saa7134_ts_register(&empress_ops); |
| } |
| |
| static void __exit empress_unregister(void) |
| { |
| saa7134_ts_unregister(&empress_ops); |
| } |
| |
| module_init(empress_register); |
| module_exit(empress_unregister); |