drivers/cpufreq/s3c64xx-cpufreq.c - kernel/msm-4.19 - Gitiles

 /*
  * Copyright 2009 Wolfson Microelectronics plc
  *
  * S3C64xx CPUfreq Support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/regulator/consumer.h>

 static struct clk *armclk;
 static struct regulator *vddarm;
 static unsigned long regulator_latency;

 #ifdef CONFIG_CPU_S3C6410
 struct s3c64xx_dvfs {
 	unsigned int vddarm_min;
 	unsigned int vddarm_max;
 };

 static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
 	[0] = { 1000000, 1150000 },
 	[1] = { 1050000, 1150000 },
 	[2] = { 1100000, 1150000 },
 	[3] = { 1200000, 1350000 },
 	[4] = { 1300000, 1350000 },
 };

 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
 	{ 0,  66000 },
 	{ 0, 100000 },
 	{ 0, 133000 },
 	{ 1, 200000 },
 	{ 1, 222000 },
 	{ 1, 266000 },
 	{ 2, 333000 },
 	{ 2, 400000 },
 	{ 2, 532000 },
 	{ 2, 533000 },
 	{ 3, 667000 },
 	{ 4, 800000 },
 	{ 0, CPUFREQ_TABLE_END },
 };
 #endif

 static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
 {
 	if (policy->cpu != 0)
 		return -EINVAL;

 	return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
 }

 static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
 {
 	if (cpu != 0)
 		return 0;

 	return clk_get_rate(armclk) / 1000;
 }

 static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
 				      unsigned int target_freq,
 				      unsigned int relation)
 {
 	int ret;
 	unsigned int i;
 	struct cpufreq_freqs freqs;
 	struct s3c64xx_dvfs *dvfs;

 	ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
 					     target_freq, relation, &i);
 	if (ret != 0)
 		return ret;

 	freqs.cpu = 0;
 	freqs.old = clk_get_rate(armclk) / 1000;
 	freqs.new = s3c64xx_freq_table[i].frequency;
 	freqs.flags = 0;
 	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];

 	if (freqs.old == freqs.new)
 		return 0;

 	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);

 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);

 #ifdef CONFIG_REGULATOR
 	if (vddarm && freqs.new > freqs.old) {
 		ret = regulator_set_voltage(vddarm,
 					    dvfs->vddarm_min,
 					    dvfs->vddarm_max);
 		if (ret != 0) {
 			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
 			       freqs.new, ret);
 			goto err;
 		}
 	}
 #endif

 	ret = clk_set_rate(armclk, freqs.new * 1000);
 	if (ret < 0) {
 		pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
 		       freqs.new, ret);
 		goto err;
 	}

 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);

 #ifdef CONFIG_REGULATOR
 	if (vddarm && freqs.new < freqs.old) {
 		ret = regulator_set_voltage(vddarm,
 					    dvfs->vddarm_min,
 					    dvfs->vddarm_max);
 		if (ret != 0) {
 			pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
 			       freqs.new, ret);
 			goto err_clk;
 		}
 	}
 #endif

 	pr_debug("cpufreq: Set actual frequency %lukHz\n",
 		 clk_get_rate(armclk) / 1000);

 	return 0;

 err_clk:
 	if (clk_set_rate(armclk, freqs.old * 1000) < 0)
 		pr_err("Failed to restore original clock rate\n");
 err:
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);

 	return ret;
 }

 #ifdef CONFIG_REGULATOR
 static void __init s3c64xx_cpufreq_config_regulator(void)
 {
 	int count, v, i, found;
 	struct cpufreq_frequency_table *freq;
 	struct s3c64xx_dvfs *dvfs;

 	count = regulator_count_voltages(vddarm);
 	if (count < 0) {
 		pr_err("cpufreq: Unable to check supported voltages\n");
 	}

 	freq = s3c64xx_freq_table;
 	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
 		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 			continue;

 		dvfs = &s3c64xx_dvfs_table[freq->index];
 		found = 0;

 		for (i = 0; i < count; i++) {
 			v = regulator_list_voltage(vddarm, i);
 			if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
 				found = 1;
 		}

 		if (!found) {
 			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
 				 freq->frequency);
 			freq->frequency = CPUFREQ_ENTRY_INVALID;
 		}

 		freq++;
 	}

 	/* Guess based on having to do an I2C/SPI write; in future we
 	 * will be able to query the regulator performance here. */
 	regulator_latency = 1 * 1000 * 1000;
 }
 #endif

 static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 {
 	int ret;
 	struct cpufreq_frequency_table *freq;

 	if (policy->cpu != 0)
 		return -EINVAL;

 	if (s3c64xx_freq_table == NULL) {
 		pr_err("cpufreq: No frequency information for this CPU\n");
 		return -ENODEV;
 	}

 	armclk = clk_get(NULL, "armclk");
 	if (IS_ERR(armclk)) {
 		pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
 		       PTR_ERR(armclk));
 		return PTR_ERR(armclk);
 	}

 #ifdef CONFIG_REGULATOR
 	vddarm = regulator_get(NULL, "vddarm");
 	if (IS_ERR(vddarm)) {
 		ret = PTR_ERR(vddarm);
 		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
 		pr_err("cpufreq: Only frequency scaling available\n");
 		vddarm = NULL;
 	} else {
 		s3c64xx_cpufreq_config_regulator();
 	}
 #endif

 	freq = s3c64xx_freq_table;
 	while (freq->frequency != CPUFREQ_TABLE_END) {
 		unsigned long r;

 		/* Check for frequencies we can generate */
 		r = clk_round_rate(armclk, freq->frequency * 1000);
 		r /= 1000;
 		if (r != freq->frequency) {
 			pr_debug("cpufreq: %dkHz unsupported by clock\n",
 				 freq->frequency);
 			freq->frequency = CPUFREQ_ENTRY_INVALID;
 		}

 		/* If we have no regulator then assume startup
 		 * frequency is the maximum we can support. */
 		if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
 			freq->frequency = CPUFREQ_ENTRY_INVALID;

 		freq++;
 	}

 	policy->cur = clk_get_rate(armclk) / 1000;

 	/* Datasheet says PLL stabalisation time (if we were to use
 	 * the PLLs, which we don't currently) is ~300us worst case,
 	 * but add some fudge.
 	 */
 	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;

 	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
 	if (ret != 0) {
 		pr_err("cpufreq: Failed to configure frequency table: %d\n",
 		       ret);
 		regulator_put(vddarm);
 		clk_put(armclk);
 	}

 	return ret;
 }

 static struct cpufreq_driver s3c64xx_cpufreq_driver = {
 	.owner		= THIS_MODULE,
 	.flags          = 0,
 	.verify		= s3c64xx_cpufreq_verify_speed,
 	.target		= s3c64xx_cpufreq_set_target,
 	.get		= s3c64xx_cpufreq_get_speed,
 	.init		= s3c64xx_cpufreq_driver_init,
 	.name		= "s3c",
 };

 static int __init s3c64xx_cpufreq_init(void)
 {
 	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
 }
 module_init(s3c64xx_cpufreq_init);
	/*
	* Copyright 2009 Wolfson Microelectronics plc
	*
	* S3C64xx CPUfreq Support
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/kernel.h>
	#include <linux/types.h>
	#include <linux/init.h>
	#include <linux/cpufreq.h>
	#include <linux/clk.h>
	#include <linux/err.h>
	#include <linux/regulator/consumer.h>

	static struct clk *armclk;
	static struct regulator *vddarm;
	static unsigned long regulator_latency;

	#ifdef CONFIG_CPU_S3C6410
	struct s3c64xx_dvfs {
	unsigned int vddarm_min;
	unsigned int vddarm_max;
	};

	static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
	[0] = { 1000000, 1150000 },
	[1] = { 1050000, 1150000 },
	[2] = { 1100000, 1150000 },
	[3] = { 1200000, 1350000 },
	[4] = { 1300000, 1350000 },
	};

	static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
	{ 0, 66000 },
	{ 0, 100000 },
	{ 0, 133000 },
	{ 1, 200000 },
	{ 1, 222000 },
	{ 1, 266000 },
	{ 2, 333000 },
	{ 2, 400000 },
	{ 2, 532000 },
	{ 2, 533000 },
	{ 3, 667000 },
	{ 4, 800000 },
	{ 0, CPUFREQ_TABLE_END },
	};
	#endif

	static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
	{
	if (policy->cpu != 0)
	return -EINVAL;

	return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
	}

	static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
	{
	if (cpu != 0)
	return 0;

	return clk_get_rate(armclk) / 1000;
	}

	static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
	unsigned int target_freq,
	unsigned int relation)
	{
	int ret;
	unsigned int i;
	struct cpufreq_freqs freqs;
	struct s3c64xx_dvfs *dvfs;

	ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
	target_freq, relation, &i);
	if (ret != 0)
	return ret;

	freqs.cpu = 0;
	freqs.old = clk_get_rate(armclk) / 1000;
	freqs.new = s3c64xx_freq_table[i].frequency;
	freqs.flags = 0;
	dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];

	if (freqs.old == freqs.new)
	return 0;

	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);

	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);

	#ifdef CONFIG_REGULATOR
	if (vddarm && freqs.new > freqs.old) {
	ret = regulator_set_voltage(vddarm,
	dvfs->vddarm_min,
	dvfs->vddarm_max);
	if (ret != 0) {
	pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
	freqs.new, ret);
	goto err;
	}
	}
	#endif

	ret = clk_set_rate(armclk, freqs.new * 1000);
	if (ret < 0) {
	pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
	freqs.new, ret);
	goto err;
	}

	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);

	#ifdef CONFIG_REGULATOR
	if (vddarm && freqs.new < freqs.old) {
	ret = regulator_set_voltage(vddarm,
	dvfs->vddarm_min,
	dvfs->vddarm_max);
	if (ret != 0) {
	pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
	freqs.new, ret);
	goto err_clk;
	}
	}
	#endif

	pr_debug("cpufreq: Set actual frequency %lukHz\n",
	clk_get_rate(armclk) / 1000);

	return 0;

	err_clk:
	if (clk_set_rate(armclk, freqs.old * 1000) < 0)
	pr_err("Failed to restore original clock rate\n");
	err:
	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);

	return ret;
	}

	#ifdef CONFIG_REGULATOR
	static void __init s3c64xx_cpufreq_config_regulator(void)
	{
	int count, v, i, found;
	struct cpufreq_frequency_table *freq;
	struct s3c64xx_dvfs *dvfs;

	count = regulator_count_voltages(vddarm);
	if (count < 0) {
	pr_err("cpufreq: Unable to check supported voltages\n");
	}

	freq = s3c64xx_freq_table;
	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
	if (freq->frequency == CPUFREQ_ENTRY_INVALID)
	continue;

	dvfs = &s3c64xx_dvfs_table[freq->index];
	found = 0;

	for (i = 0; i < count; i++) {
	v = regulator_list_voltage(vddarm, i);
	if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
	found = 1;
	}

	if (!found) {
	pr_debug("cpufreq: %dkHz unsupported by regulator\n",
	freq->frequency);
	freq->frequency = CPUFREQ_ENTRY_INVALID;
	}

	freq++;
	}

	/* Guess based on having to do an I2C/SPI write; in future we
	* will be able to query the regulator performance here. */
	regulator_latency = 1 * 1000 * 1000;
	}
	#endif

	static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
	{
	int ret;
	struct cpufreq_frequency_table *freq;

	if (policy->cpu != 0)
	return -EINVAL;

	if (s3c64xx_freq_table == NULL) {
	pr_err("cpufreq: No frequency information for this CPU\n");
	return -ENODEV;
	}

	armclk = clk_get(NULL, "armclk");
	if (IS_ERR(armclk)) {
	pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
	PTR_ERR(armclk));
	return PTR_ERR(armclk);
	}

	#ifdef CONFIG_REGULATOR
	vddarm = regulator_get(NULL, "vddarm");
	if (IS_ERR(vddarm)) {
	ret = PTR_ERR(vddarm);
	pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
	pr_err("cpufreq: Only frequency scaling available\n");
	vddarm = NULL;
	} else {
	s3c64xx_cpufreq_config_regulator();
	}
	#endif

	freq = s3c64xx_freq_table;
	while (freq->frequency != CPUFREQ_TABLE_END) {
	unsigned long r;

	/* Check for frequencies we can generate */
	r = clk_round_rate(armclk, freq->frequency * 1000);
	r /= 1000;
	if (r != freq->frequency) {
	pr_debug("cpufreq: %dkHz unsupported by clock\n",
	freq->frequency);
	freq->frequency = CPUFREQ_ENTRY_INVALID;
	}

	/* If we have no regulator then assume startup
	* frequency is the maximum we can support. */
	if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
	freq->frequency = CPUFREQ_ENTRY_INVALID;

	freq++;
	}

	policy->cur = clk_get_rate(armclk) / 1000;

	/* Datasheet says PLL stabalisation time (if we were to use
	* the PLLs, which we don't currently) is ~300us worst case,
	* but add some fudge.
	*/
	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;

	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
	if (ret != 0) {
	pr_err("cpufreq: Failed to configure frequency table: %d\n",
	ret);
	regulator_put(vddarm);
	clk_put(armclk);
	}

	return ret;
	}

	static struct cpufreq_driver s3c64xx_cpufreq_driver = {
	.owner = THIS_MODULE,
	.flags = 0,
	.verify = s3c64xx_cpufreq_verify_speed,
	.target = s3c64xx_cpufreq_set_target,
	.get = s3c64xx_cpufreq_get_speed,
	.init = s3c64xx_cpufreq_driver_init,
	.name = "s3c",
	};

	static int __init s3c64xx_cpufreq_init(void)
	{
	return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
	}
	module_init(s3c64xx_cpufreq_init);