arch/xtensa/include/asm/initialize_mmu.h

/*
 * arch/xtensa/include/asm/initialize_mmu.h
 *
 * Initializes MMU:
 *
 *      For the new V3 MMU we remap the TLB from virtual == physical
 *      to the standard Linux mapping used in earlier MMU's.
 *
 *      The the MMU we also support a new configuration register that
 *      specifies how the S32C1I instruction operates with the cache
 *      controller.
 *
 * This file is subject to the terms and conditions of the GNU General
 * Public License.  See the file "COPYING" in the main directory of
 * this archive for more details.
 *
 * Copyright (C) 2008 - 2012 Tensilica, Inc.
 *
 *   Marc Gauthier <marc@tensilica.com>
 *   Pete Delaney <piet@tensilica.com>
 */

#ifndef _XTENSA_INITIALIZE_MMU_H
#define _XTENSA_INITIALIZE_MMU_H

#include <asm/pgtable.h>
#include <asm/vectors.h>

#define CA_BYPASS	(_PAGE_CA_BYPASS | _PAGE_HW_WRITE | _PAGE_HW_EXEC)
#define CA_WRITEBACK	(_PAGE_CA_WB     | _PAGE_HW_WRITE | _PAGE_HW_EXEC)

#ifdef __ASSEMBLY__

#define XTENSA_HWVERSION_RC_2009_0 230000

	.macro	initialize_mmu

#if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
/*
 * We Have Atomic Operation Control (ATOMCTL) Register; Initialize it.
 * For details see Documentation/xtensa/atomctl.txt
 */
#if XCHAL_DCACHE_IS_COHERENT
	movi	a3, 0x25	/* For SMP/MX -- internal for writeback,
				 * RCW otherwise
				 */
#else
	movi	a3, 0x29	/* non-MX -- Most cores use Std Memory
				 * Controlers which usually can't use RCW
				 */
#endif
	wsr	a3, atomctl
#endif  /* XCHAL_HAVE_S32C1I &&
	 * (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
	 */

#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
/*
 * Have MMU v3
 */

#if !XCHAL_HAVE_VECBASE
# error "MMU v3 requires reloc vectors"
#endif

	movi	a1, 0
	_call0	1f
	_j	2f

	.align	4
1:	movi	a2, 0x10000000
	movi	a3, 0x18000000
	add	a2, a2, a0
9:	bgeu	a2, a3, 9b	/* PC is out of the expected range */

	/* Step 1: invalidate mapping at 0x40000000..0x5FFFFFFF. */

	movi	a2, 0x40000006
	idtlb	a2
	iitlb	a2
	isync

	/* Step 2: map 0x40000000..0x47FFFFFF to paddr containing this code
	 * and jump to the new mapping.
	 */

	srli	a3, a0, 27
	slli	a3, a3, 27
	addi	a3, a3, CA_BYPASS
	addi	a7, a2, -1
	wdtlb	a3, a7
	witlb	a3, a7
	isync

	slli	a4, a0, 5
	srli	a4, a4, 5
	addi	a5, a2, -6
	add	a4, a4, a5
	jx	a4

	/* Step 3: unmap everything other than current area.
	 *	   Start at 0x60000000, wrap around, and end with 0x20000000
	 */
2:	movi	a4, 0x20000000
	add	a5, a2, a4
3:	idtlb	a5
	iitlb	a5
	add	a5, a5, a4
	bne	a5, a2, 3b

	/* Step 4: Setup MMU with the old V2 mappings. */
	movi	a6, 0x01000000
	wsr	a6, ITLBCFG
	wsr	a6, DTLBCFG
	isync

	movi	a5, 0xd0000005
	movi	a4, CA_WRITEBACK
	wdtlb	a4, a5
	witlb	a4, a5

	movi	a5, 0xd8000005
	movi	a4, CA_BYPASS
	wdtlb	a4, a5
	witlb	a4, a5

	movi	a5, XCHAL_KIO_CACHED_VADDR + 6
	movi	a4, XCHAL_KIO_DEFAULT_PADDR + CA_WRITEBACK
	wdtlb	a4, a5
	witlb	a4, a5

	movi	a5, XCHAL_KIO_BYPASS_VADDR + 6
	movi	a4, XCHAL_KIO_DEFAULT_PADDR + CA_BYPASS
	wdtlb	a4, a5
	witlb	a4, a5

	isync

	/* Jump to self, using MMU v2 mappings. */
	movi	a4, 1f
	jx	a4

1:
	/* Step 5: remove temporary mapping. */
	idtlb	a7
	iitlb	a7
	isync

	movi	a0, 0
	wsr	a0, ptevaddr
	rsync

#endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
	  XCHAL_HAVE_SPANNING_WAY */

	.endm

#endif /*__ASSEMBLY__*/

#endif /* _XTENSA_INITIALIZE_MMU_H */