| /* |
| * Copyright(c) 2015, 2016 Intel Corporation. |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * BSD LICENSE |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * - Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * - Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * - Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| #include <linux/mm.h> |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/dmapool.h> |
| #include <linux/slab.h> |
| #include <linux/list.h> |
| #include <linux/highmem.h> |
| #include <linux/io.h> |
| #include <linux/uio.h> |
| #include <linux/rbtree.h> |
| #include <linux/spinlock.h> |
| #include <linux/delay.h> |
| #include <linux/kthread.h> |
| #include <linux/mmu_context.h> |
| #include <linux/module.h> |
| #include <linux/vmalloc.h> |
| |
| #include "hfi.h" |
| #include "sdma.h" |
| #include "user_sdma.h" |
| #include "verbs.h" /* for the headers */ |
| #include "common.h" /* for struct hfi1_tid_info */ |
| #include "trace.h" |
| #include "mmu_rb.h" |
| |
| static uint hfi1_sdma_comp_ring_size = 128; |
| module_param_named(sdma_comp_size, hfi1_sdma_comp_ring_size, uint, S_IRUGO); |
| MODULE_PARM_DESC(sdma_comp_size, "Size of User SDMA completion ring. Default: 128"); |
| |
| /* The maximum number of Data io vectors per message/request */ |
| #define MAX_VECTORS_PER_REQ 8 |
| /* |
| * Maximum number of packet to send from each message/request |
| * before moving to the next one. |
| */ |
| #define MAX_PKTS_PER_QUEUE 16 |
| |
| #define num_pages(x) (1 + ((((x) - 1) & PAGE_MASK) >> PAGE_SHIFT)) |
| |
| #define req_opcode(x) \ |
| (((x) >> HFI1_SDMA_REQ_OPCODE_SHIFT) & HFI1_SDMA_REQ_OPCODE_MASK) |
| #define req_version(x) \ |
| (((x) >> HFI1_SDMA_REQ_VERSION_SHIFT) & HFI1_SDMA_REQ_OPCODE_MASK) |
| #define req_iovcnt(x) \ |
| (((x) >> HFI1_SDMA_REQ_IOVCNT_SHIFT) & HFI1_SDMA_REQ_IOVCNT_MASK) |
| |
| /* Number of BTH.PSN bits used for sequence number in expected rcvs */ |
| #define BTH_SEQ_MASK 0x7ffull |
| |
| /* |
| * Define fields in the KDETH header so we can update the header |
| * template. |
| */ |
| #define KDETH_OFFSET_SHIFT 0 |
| #define KDETH_OFFSET_MASK 0x7fff |
| #define KDETH_OM_SHIFT 15 |
| #define KDETH_OM_MASK 0x1 |
| #define KDETH_TID_SHIFT 16 |
| #define KDETH_TID_MASK 0x3ff |
| #define KDETH_TIDCTRL_SHIFT 26 |
| #define KDETH_TIDCTRL_MASK 0x3 |
| #define KDETH_INTR_SHIFT 28 |
| #define KDETH_INTR_MASK 0x1 |
| #define KDETH_SH_SHIFT 29 |
| #define KDETH_SH_MASK 0x1 |
| #define KDETH_HCRC_UPPER_SHIFT 16 |
| #define KDETH_HCRC_UPPER_MASK 0xff |
| #define KDETH_HCRC_LOWER_SHIFT 24 |
| #define KDETH_HCRC_LOWER_MASK 0xff |
| |
| #define AHG_KDETH_INTR_SHIFT 12 |
| |
| #define PBC2LRH(x) ((((x) & 0xfff) << 2) - 4) |
| #define LRH2PBC(x) ((((x) >> 2) + 1) & 0xfff) |
| |
| #define KDETH_GET(val, field) \ |
| (((le32_to_cpu((val))) >> KDETH_##field##_SHIFT) & KDETH_##field##_MASK) |
| #define KDETH_SET(dw, field, val) do { \ |
| u32 dwval = le32_to_cpu(dw); \ |
| dwval &= ~(KDETH_##field##_MASK << KDETH_##field##_SHIFT); \ |
| dwval |= (((val) & KDETH_##field##_MASK) << \ |
| KDETH_##field##_SHIFT); \ |
| dw = cpu_to_le32(dwval); \ |
| } while (0) |
| |
| #define AHG_HEADER_SET(arr, idx, dw, bit, width, value) \ |
| do { \ |
| if ((idx) < ARRAY_SIZE((arr))) \ |
| (arr)[(idx++)] = sdma_build_ahg_descriptor( \ |
| (__force u16)(value), (dw), (bit), \ |
| (width)); \ |
| else \ |
| return -ERANGE; \ |
| } while (0) |
| |
| /* KDETH OM multipliers and switch over point */ |
| #define KDETH_OM_SMALL 4 |
| #define KDETH_OM_LARGE 64 |
| #define KDETH_OM_MAX_SIZE (1 << ((KDETH_OM_LARGE / KDETH_OM_SMALL) + 1)) |
| |
| /* Last packet in the request */ |
| #define TXREQ_FLAGS_REQ_LAST_PKT BIT(0) |
| |
| /* SDMA request flag bits */ |
| #define SDMA_REQ_FOR_THREAD 1 |
| #define SDMA_REQ_SEND_DONE 2 |
| #define SDMA_REQ_HAVE_AHG 3 |
| #define SDMA_REQ_HAS_ERROR 4 |
| #define SDMA_REQ_DONE_ERROR 5 |
| |
| #define SDMA_PKT_Q_INACTIVE BIT(0) |
| #define SDMA_PKT_Q_ACTIVE BIT(1) |
| #define SDMA_PKT_Q_DEFERRED BIT(2) |
| |
| /* |
| * Maximum retry attempts to submit a TX request |
| * before putting the process to sleep. |
| */ |
| #define MAX_DEFER_RETRY_COUNT 1 |
| |
| static unsigned initial_pkt_count = 8; |
| |
| #define SDMA_IOWAIT_TIMEOUT 1000 /* in milliseconds */ |
| |
| struct sdma_mmu_node; |
| |
| struct user_sdma_iovec { |
| struct list_head list; |
| struct iovec iov; |
| /* number of pages in this vector */ |
| unsigned npages; |
| /* array of pinned pages for this vector */ |
| struct page **pages; |
| /* |
| * offset into the virtual address space of the vector at |
| * which we last left off. |
| */ |
| u64 offset; |
| struct sdma_mmu_node *node; |
| }; |
| |
| struct sdma_mmu_node { |
| struct mmu_rb_node rb; |
| struct hfi1_user_sdma_pkt_q *pq; |
| atomic_t refcount; |
| struct page **pages; |
| unsigned npages; |
| }; |
| |
| /* evict operation argument */ |
| struct evict_data { |
| u32 cleared; /* count evicted so far */ |
| u32 target; /* target count to evict */ |
| }; |
| |
| struct user_sdma_request { |
| struct sdma_req_info info; |
| struct hfi1_user_sdma_pkt_q *pq; |
| struct hfi1_user_sdma_comp_q *cq; |
| /* This is the original header from user space */ |
| struct hfi1_pkt_header hdr; |
| /* |
| * Pointer to the SDMA engine for this request. |
| * Since different request could be on different VLs, |
| * each request will need it's own engine pointer. |
| */ |
| struct sdma_engine *sde; |
| u8 ahg_idx; |
| u32 ahg[9]; |
| /* |
| * KDETH.Offset (Eager) field |
| * We need to remember the initial value so the headers |
| * can be updated properly. |
| */ |
| u32 koffset; |
| /* |
| * KDETH.OFFSET (TID) field |
| * The offset can cover multiple packets, depending on the |
| * size of the TID entry. |
| */ |
| u32 tidoffset; |
| /* |
| * KDETH.OM |
| * Remember this because the header template always sets it |
| * to 0. |
| */ |
| u8 omfactor; |
| /* |
| * We copy the iovs for this request (based on |
| * info.iovcnt). These are only the data vectors |
| */ |
| unsigned data_iovs; |
| /* total length of the data in the request */ |
| u32 data_len; |
| /* progress index moving along the iovs array */ |
| unsigned iov_idx; |
| struct user_sdma_iovec iovs[MAX_VECTORS_PER_REQ]; |
| /* number of elements copied to the tids array */ |
| u16 n_tids; |
| /* TID array values copied from the tid_iov vector */ |
| u32 *tids; |
| u16 tididx; |
| u32 sent; |
| u64 seqnum; |
| u64 seqcomp; |
| u64 seqsubmitted; |
| struct list_head txps; |
| unsigned long flags; |
| /* status of the last txreq completed */ |
| int status; |
| }; |
| |
| /* |
| * A single txreq could span up to 3 physical pages when the MTU |
| * is sufficiently large (> 4K). Each of the IOV pointers also |
| * needs it's own set of flags so the vector has been handled |
| * independently of each other. |
| */ |
| struct user_sdma_txreq { |
| /* Packet header for the txreq */ |
| struct hfi1_pkt_header hdr; |
| struct sdma_txreq txreq; |
| struct list_head list; |
| struct user_sdma_request *req; |
| u16 flags; |
| unsigned busycount; |
| u64 seqnum; |
| }; |
| |
| #define SDMA_DBG(req, fmt, ...) \ |
| hfi1_cdbg(SDMA, "[%u:%u:%u:%u] " fmt, (req)->pq->dd->unit, \ |
| (req)->pq->ctxt, (req)->pq->subctxt, (req)->info.comp_idx, \ |
| ##__VA_ARGS__) |
| #define SDMA_Q_DBG(pq, fmt, ...) \ |
| hfi1_cdbg(SDMA, "[%u:%u:%u] " fmt, (pq)->dd->unit, (pq)->ctxt, \ |
| (pq)->subctxt, ##__VA_ARGS__) |
| |
| static int user_sdma_send_pkts(struct user_sdma_request *, unsigned); |
| static int num_user_pages(const struct iovec *); |
| static void user_sdma_txreq_cb(struct sdma_txreq *, int); |
| static inline void pq_update(struct hfi1_user_sdma_pkt_q *); |
| static void user_sdma_free_request(struct user_sdma_request *, bool); |
| static int pin_vector_pages(struct user_sdma_request *, |
| struct user_sdma_iovec *); |
| static void unpin_vector_pages(struct mm_struct *, struct page **, unsigned, |
| unsigned); |
| static int check_header_template(struct user_sdma_request *, |
| struct hfi1_pkt_header *, u32, u32); |
| static int set_txreq_header(struct user_sdma_request *, |
| struct user_sdma_txreq *, u32); |
| static int set_txreq_header_ahg(struct user_sdma_request *, |
| struct user_sdma_txreq *, u32); |
| static inline void set_comp_state(struct hfi1_user_sdma_pkt_q *, |
| struct hfi1_user_sdma_comp_q *, |
| u16, enum hfi1_sdma_comp_state, int); |
| static inline u32 set_pkt_bth_psn(__be32, u8, u32); |
| static inline u32 get_lrh_len(struct hfi1_pkt_header, u32 len); |
| |
| static int defer_packet_queue( |
| struct sdma_engine *, |
| struct iowait *, |
| struct sdma_txreq *, |
| unsigned seq); |
| static void activate_packet_queue(struct iowait *, int); |
| static bool sdma_rb_filter(struct mmu_rb_node *, unsigned long, unsigned long); |
| static int sdma_rb_insert(void *, struct mmu_rb_node *); |
| static int sdma_rb_evict(void *arg, struct mmu_rb_node *mnode, |
| void *arg2, bool *stop); |
| static void sdma_rb_remove(void *, struct mmu_rb_node *); |
| static int sdma_rb_invalidate(void *, struct mmu_rb_node *); |
| |
| static struct mmu_rb_ops sdma_rb_ops = { |
| .filter = sdma_rb_filter, |
| .insert = sdma_rb_insert, |
| .evict = sdma_rb_evict, |
| .remove = sdma_rb_remove, |
| .invalidate = sdma_rb_invalidate |
| }; |
| |
| static int defer_packet_queue( |
| struct sdma_engine *sde, |
| struct iowait *wait, |
| struct sdma_txreq *txreq, |
| unsigned seq) |
| { |
| struct hfi1_user_sdma_pkt_q *pq = |
| container_of(wait, struct hfi1_user_sdma_pkt_q, busy); |
| struct hfi1_ibdev *dev = &pq->dd->verbs_dev; |
| struct user_sdma_txreq *tx = |
| container_of(txreq, struct user_sdma_txreq, txreq); |
| |
| if (sdma_progress(sde, seq, txreq)) { |
| if (tx->busycount++ < MAX_DEFER_RETRY_COUNT) |
| goto eagain; |
| } |
| /* |
| * We are assuming that if the list is enqueued somewhere, it |
| * is to the dmawait list since that is the only place where |
| * it is supposed to be enqueued. |
| */ |
| xchg(&pq->state, SDMA_PKT_Q_DEFERRED); |
| write_seqlock(&dev->iowait_lock); |
| if (list_empty(&pq->busy.list)) |
| list_add_tail(&pq->busy.list, &sde->dmawait); |
| write_sequnlock(&dev->iowait_lock); |
| return -EBUSY; |
| eagain: |
| return -EAGAIN; |
| } |
| |
| static void activate_packet_queue(struct iowait *wait, int reason) |
| { |
| struct hfi1_user_sdma_pkt_q *pq = |
| container_of(wait, struct hfi1_user_sdma_pkt_q, busy); |
| xchg(&pq->state, SDMA_PKT_Q_ACTIVE); |
| wake_up(&wait->wait_dma); |
| }; |
| |
| static void sdma_kmem_cache_ctor(void *obj) |
| { |
| struct user_sdma_txreq *tx = obj; |
| |
| memset(tx, 0, sizeof(*tx)); |
| } |
| |
| int hfi1_user_sdma_alloc_queues(struct hfi1_ctxtdata *uctxt, struct file *fp) |
| { |
| struct hfi1_filedata *fd; |
| int ret = 0; |
| unsigned memsize; |
| char buf[64]; |
| struct hfi1_devdata *dd; |
| struct hfi1_user_sdma_comp_q *cq; |
| struct hfi1_user_sdma_pkt_q *pq; |
| unsigned long flags; |
| |
| if (!uctxt || !fp) { |
| ret = -EBADF; |
| goto done; |
| } |
| |
| fd = fp->private_data; |
| |
| if (!hfi1_sdma_comp_ring_size) { |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| dd = uctxt->dd; |
| |
| pq = kzalloc(sizeof(*pq), GFP_KERNEL); |
| if (!pq) |
| goto pq_nomem; |
| |
| memsize = sizeof(*pq->reqs) * hfi1_sdma_comp_ring_size; |
| pq->reqs = kzalloc(memsize, GFP_KERNEL); |
| if (!pq->reqs) |
| goto pq_reqs_nomem; |
| |
| memsize = BITS_TO_LONGS(hfi1_sdma_comp_ring_size) * sizeof(long); |
| pq->req_in_use = kzalloc(memsize, GFP_KERNEL); |
| if (!pq->req_in_use) |
| goto pq_reqs_no_in_use; |
| |
| INIT_LIST_HEAD(&pq->list); |
| pq->dd = dd; |
| pq->ctxt = uctxt->ctxt; |
| pq->subctxt = fd->subctxt; |
| pq->n_max_reqs = hfi1_sdma_comp_ring_size; |
| pq->state = SDMA_PKT_Q_INACTIVE; |
| atomic_set(&pq->n_reqs, 0); |
| init_waitqueue_head(&pq->wait); |
| atomic_set(&pq->n_locked, 0); |
| pq->mm = fd->mm; |
| |
| iowait_init(&pq->busy, 0, NULL, defer_packet_queue, |
| activate_packet_queue, NULL); |
| pq->reqidx = 0; |
| snprintf(buf, 64, "txreq-kmem-cache-%u-%u-%u", dd->unit, uctxt->ctxt, |
| fd->subctxt); |
| pq->txreq_cache = kmem_cache_create(buf, |
| sizeof(struct user_sdma_txreq), |
| L1_CACHE_BYTES, |
| SLAB_HWCACHE_ALIGN, |
| sdma_kmem_cache_ctor); |
| if (!pq->txreq_cache) { |
| dd_dev_err(dd, "[%u] Failed to allocate TxReq cache\n", |
| uctxt->ctxt); |
| goto pq_txreq_nomem; |
| } |
| fd->pq = pq; |
| cq = kzalloc(sizeof(*cq), GFP_KERNEL); |
| if (!cq) |
| goto cq_nomem; |
| |
| memsize = PAGE_ALIGN(sizeof(*cq->comps) * hfi1_sdma_comp_ring_size); |
| cq->comps = vmalloc_user(memsize); |
| if (!cq->comps) |
| goto cq_comps_nomem; |
| |
| cq->nentries = hfi1_sdma_comp_ring_size; |
| fd->cq = cq; |
| |
| ret = hfi1_mmu_rb_register(pq, pq->mm, &sdma_rb_ops, dd->pport->hfi1_wq, |
| &pq->handler); |
| if (ret) { |
| dd_dev_err(dd, "Failed to register with MMU %d", ret); |
| goto done; |
| } |
| |
| spin_lock_irqsave(&uctxt->sdma_qlock, flags); |
| list_add(&pq->list, &uctxt->sdma_queues); |
| spin_unlock_irqrestore(&uctxt->sdma_qlock, flags); |
| goto done; |
| |
| cq_comps_nomem: |
| kfree(cq); |
| cq_nomem: |
| kmem_cache_destroy(pq->txreq_cache); |
| pq_txreq_nomem: |
| kfree(pq->req_in_use); |
| pq_reqs_no_in_use: |
| kfree(pq->reqs); |
| pq_reqs_nomem: |
| kfree(pq); |
| fd->pq = NULL; |
| pq_nomem: |
| ret = -ENOMEM; |
| done: |
| return ret; |
| } |
| |
| int hfi1_user_sdma_free_queues(struct hfi1_filedata *fd) |
| { |
| struct hfi1_ctxtdata *uctxt = fd->uctxt; |
| struct hfi1_user_sdma_pkt_q *pq; |
| unsigned long flags; |
| |
| hfi1_cdbg(SDMA, "[%u:%u:%u] Freeing user SDMA queues", uctxt->dd->unit, |
| uctxt->ctxt, fd->subctxt); |
| pq = fd->pq; |
| if (pq) { |
| if (pq->handler) |
| hfi1_mmu_rb_unregister(pq->handler); |
| spin_lock_irqsave(&uctxt->sdma_qlock, flags); |
| if (!list_empty(&pq->list)) |
| list_del_init(&pq->list); |
| spin_unlock_irqrestore(&uctxt->sdma_qlock, flags); |
| iowait_sdma_drain(&pq->busy); |
| /* Wait until all requests have been freed. */ |
| wait_event_interruptible( |
| pq->wait, |
| (ACCESS_ONCE(pq->state) == SDMA_PKT_Q_INACTIVE)); |
| kfree(pq->reqs); |
| kfree(pq->req_in_use); |
| kmem_cache_destroy(pq->txreq_cache); |
| kfree(pq); |
| fd->pq = NULL; |
| } |
| if (fd->cq) { |
| vfree(fd->cq->comps); |
| kfree(fd->cq); |
| fd->cq = NULL; |
| } |
| return 0; |
| } |
| |
| static u8 dlid_to_selector(u16 dlid) |
| { |
| static u8 mapping[256]; |
| static int initialized; |
| static u8 next; |
| int hash; |
| |
| if (!initialized) { |
| memset(mapping, 0xFF, 256); |
| initialized = 1; |
| } |
| |
| hash = ((dlid >> 8) ^ dlid) & 0xFF; |
| if (mapping[hash] == 0xFF) { |
| mapping[hash] = next; |
| next = (next + 1) & 0x7F; |
| } |
| |
| return mapping[hash]; |
| } |
| |
| int hfi1_user_sdma_process_request(struct file *fp, struct iovec *iovec, |
| unsigned long dim, unsigned long *count) |
| { |
| int ret = 0, i; |
| struct hfi1_filedata *fd = fp->private_data; |
| struct hfi1_ctxtdata *uctxt = fd->uctxt; |
| struct hfi1_user_sdma_pkt_q *pq = fd->pq; |
| struct hfi1_user_sdma_comp_q *cq = fd->cq; |
| struct hfi1_devdata *dd = pq->dd; |
| unsigned long idx = 0; |
| u8 pcount = initial_pkt_count; |
| struct sdma_req_info info; |
| struct user_sdma_request *req; |
| u8 opcode, sc, vl; |
| int req_queued = 0; |
| u16 dlid; |
| u32 selector; |
| |
| if (iovec[idx].iov_len < sizeof(info) + sizeof(req->hdr)) { |
| hfi1_cdbg( |
| SDMA, |
| "[%u:%u:%u] First vector not big enough for header %lu/%lu", |
| dd->unit, uctxt->ctxt, fd->subctxt, |
| iovec[idx].iov_len, sizeof(info) + sizeof(req->hdr)); |
| return -EINVAL; |
| } |
| ret = copy_from_user(&info, iovec[idx].iov_base, sizeof(info)); |
| if (ret) { |
| hfi1_cdbg(SDMA, "[%u:%u:%u] Failed to copy info QW (%d)", |
| dd->unit, uctxt->ctxt, fd->subctxt, ret); |
| return -EFAULT; |
| } |
| |
| trace_hfi1_sdma_user_reqinfo(dd, uctxt->ctxt, fd->subctxt, |
| (u16 *)&info); |
| |
| if (info.comp_idx >= hfi1_sdma_comp_ring_size) { |
| hfi1_cdbg(SDMA, |
| "[%u:%u:%u:%u] Invalid comp index", |
| dd->unit, uctxt->ctxt, fd->subctxt, info.comp_idx); |
| return -EINVAL; |
| } |
| |
| /* |
| * Sanity check the header io vector count. Need at least 1 vector |
| * (header) and cannot be larger than the actual io vector count. |
| */ |
| if (req_iovcnt(info.ctrl) < 1 || req_iovcnt(info.ctrl) > dim) { |
| hfi1_cdbg(SDMA, |
| "[%u:%u:%u:%u] Invalid iov count %d, dim %ld", |
| dd->unit, uctxt->ctxt, fd->subctxt, info.comp_idx, |
| req_iovcnt(info.ctrl), dim); |
| return -EINVAL; |
| } |
| |
| if (!info.fragsize) { |
| hfi1_cdbg(SDMA, |
| "[%u:%u:%u:%u] Request does not specify fragsize", |
| dd->unit, uctxt->ctxt, fd->subctxt, info.comp_idx); |
| return -EINVAL; |
| } |
| |
| /* Try to claim the request. */ |
| if (test_and_set_bit(info.comp_idx, pq->req_in_use)) { |
| hfi1_cdbg(SDMA, "[%u:%u:%u] Entry %u is in use", |
| dd->unit, uctxt->ctxt, fd->subctxt, |
| info.comp_idx); |
| return -EBADSLT; |
| } |
| /* |
| * All safety checks have been done and this request has been claimed. |
| */ |
| hfi1_cdbg(SDMA, "[%u:%u:%u] Using req/comp entry %u\n", dd->unit, |
| uctxt->ctxt, fd->subctxt, info.comp_idx); |
| req = pq->reqs + info.comp_idx; |
| memset(req, 0, sizeof(*req)); |
| req->data_iovs = req_iovcnt(info.ctrl) - 1; /* subtract header vector */ |
| req->pq = pq; |
| req->cq = cq; |
| req->status = -1; |
| INIT_LIST_HEAD(&req->txps); |
| |
| memcpy(&req->info, &info, sizeof(info)); |
| |
| if (req_opcode(info.ctrl) == EXPECTED) { |
| /* expected must have a TID info and at least one data vector */ |
| if (req->data_iovs < 2) { |
| SDMA_DBG(req, |
| "Not enough vectors for expected request"); |
| ret = -EINVAL; |
| goto free_req; |
| } |
| req->data_iovs--; |
| } |
| |
| if (!info.npkts || req->data_iovs > MAX_VECTORS_PER_REQ) { |
| SDMA_DBG(req, "Too many vectors (%u/%u)", req->data_iovs, |
| MAX_VECTORS_PER_REQ); |
| ret = -EINVAL; |
| goto free_req; |
| } |
| /* Copy the header from the user buffer */ |
| ret = copy_from_user(&req->hdr, iovec[idx].iov_base + sizeof(info), |
| sizeof(req->hdr)); |
| if (ret) { |
| SDMA_DBG(req, "Failed to copy header template (%d)", ret); |
| ret = -EFAULT; |
| goto free_req; |
| } |
| |
| /* If Static rate control is not enabled, sanitize the header. */ |
| if (!HFI1_CAP_IS_USET(STATIC_RATE_CTRL)) |
| req->hdr.pbc[2] = 0; |
| |
| /* Validate the opcode. Do not trust packets from user space blindly. */ |
| opcode = (be32_to_cpu(req->hdr.bth[0]) >> 24) & 0xff; |
| if ((opcode & USER_OPCODE_CHECK_MASK) != |
| USER_OPCODE_CHECK_VAL) { |
| SDMA_DBG(req, "Invalid opcode (%d)", opcode); |
| ret = -EINVAL; |
| goto free_req; |
| } |
| /* |
| * Validate the vl. Do not trust packets from user space blindly. |
| * VL comes from PBC, SC comes from LRH, and the VL needs to |
| * match the SC look up. |
| */ |
| vl = (le16_to_cpu(req->hdr.pbc[0]) >> 12) & 0xF; |
| sc = (((be16_to_cpu(req->hdr.lrh[0]) >> 12) & 0xF) | |
| (((le16_to_cpu(req->hdr.pbc[1]) >> 14) & 0x1) << 4)); |
| if (vl >= dd->pport->vls_operational || |
| vl != sc_to_vlt(dd, sc)) { |
| SDMA_DBG(req, "Invalid SC(%u)/VL(%u)", sc, vl); |
| ret = -EINVAL; |
| goto free_req; |
| } |
| |
| /* Checking P_KEY for requests from user-space */ |
| if (egress_pkey_check(dd->pport, req->hdr.lrh, req->hdr.bth, sc, |
| PKEY_CHECK_INVALID)) { |
| ret = -EINVAL; |
| goto free_req; |
| } |
| |
| /* |
| * Also should check the BTH.lnh. If it says the next header is GRH then |
| * the RXE parsing will be off and will land in the middle of the KDETH |
| * or miss it entirely. |
| */ |
| if ((be16_to_cpu(req->hdr.lrh[0]) & 0x3) == HFI1_LRH_GRH) { |
| SDMA_DBG(req, "User tried to pass in a GRH"); |
| ret = -EINVAL; |
| goto free_req; |
| } |
| |
| req->koffset = le32_to_cpu(req->hdr.kdeth.swdata[6]); |
| /* |
| * Calculate the initial TID offset based on the values of |
| * KDETH.OFFSET and KDETH.OM that are passed in. |
| */ |
| req->tidoffset = KDETH_GET(req->hdr.kdeth.ver_tid_offset, OFFSET) * |
| (KDETH_GET(req->hdr.kdeth.ver_tid_offset, OM) ? |
| KDETH_OM_LARGE : KDETH_OM_SMALL); |
| SDMA_DBG(req, "Initial TID offset %u", req->tidoffset); |
| idx++; |
| |
| /* Save all the IO vector structures */ |
| for (i = 0; i < req->data_iovs; i++) { |
| INIT_LIST_HEAD(&req->iovs[i].list); |
| memcpy(&req->iovs[i].iov, iovec + idx++, sizeof(struct iovec)); |
| ret = pin_vector_pages(req, &req->iovs[i]); |
| if (ret) { |
| req->status = ret; |
| goto free_req; |
| } |
| req->data_len += req->iovs[i].iov.iov_len; |
| } |
| SDMA_DBG(req, "total data length %u", req->data_len); |
| |
| if (pcount > req->info.npkts) |
| pcount = req->info.npkts; |
| /* |
| * Copy any TID info |
| * User space will provide the TID info only when the |
| * request type is EXPECTED. This is true even if there is |
| * only one packet in the request and the header is already |
| * setup. The reason for the singular TID case is that the |
| * driver needs to perform safety checks. |
| */ |
| if (req_opcode(req->info.ctrl) == EXPECTED) { |
| u16 ntids = iovec[idx].iov_len / sizeof(*req->tids); |
| |
| if (!ntids || ntids > MAX_TID_PAIR_ENTRIES) { |
| ret = -EINVAL; |
| goto free_req; |
| } |
| req->tids = kcalloc(ntids, sizeof(*req->tids), GFP_KERNEL); |
| if (!req->tids) { |
| ret = -ENOMEM; |
| goto free_req; |
| } |
| /* |
| * We have to copy all of the tids because they may vary |
| * in size and, therefore, the TID count might not be |
| * equal to the pkt count. However, there is no way to |
| * tell at this point. |
| */ |
| ret = copy_from_user(req->tids, iovec[idx].iov_base, |
| ntids * sizeof(*req->tids)); |
| if (ret) { |
| SDMA_DBG(req, "Failed to copy %d TIDs (%d)", |
| ntids, ret); |
| ret = -EFAULT; |
| goto free_req; |
| } |
| req->n_tids = ntids; |
| idx++; |
| } |
| |
| dlid = be16_to_cpu(req->hdr.lrh[1]); |
| selector = dlid_to_selector(dlid); |
| selector += uctxt->ctxt + fd->subctxt; |
| req->sde = sdma_select_user_engine(dd, selector, vl); |
| |
| if (!req->sde || !sdma_running(req->sde)) { |
| ret = -ECOMM; |
| goto free_req; |
| } |
| |
| /* We don't need an AHG entry if the request contains only one packet */ |
| if (req->info.npkts > 1 && HFI1_CAP_IS_USET(SDMA_AHG)) { |
| int ahg = sdma_ahg_alloc(req->sde); |
| |
| if (likely(ahg >= 0)) { |
| req->ahg_idx = (u8)ahg; |
| set_bit(SDMA_REQ_HAVE_AHG, &req->flags); |
| } |
| } |
| |
| set_comp_state(pq, cq, info.comp_idx, QUEUED, 0); |
| atomic_inc(&pq->n_reqs); |
| req_queued = 1; |
| /* Send the first N packets in the request to buy us some time */ |
| ret = user_sdma_send_pkts(req, pcount); |
| if (unlikely(ret < 0 && ret != -EBUSY)) { |
| req->status = ret; |
| goto free_req; |
| } |
| |
| /* |
| * It is possible that the SDMA engine would have processed all the |
| * submitted packets by the time we get here. Therefore, only set |
| * packet queue state to ACTIVE if there are still uncompleted |
| * requests. |
| */ |
| if (atomic_read(&pq->n_reqs)) |
| xchg(&pq->state, SDMA_PKT_Q_ACTIVE); |
| |
| /* |
| * This is a somewhat blocking send implementation. |
| * The driver will block the caller until all packets of the |
| * request have been submitted to the SDMA engine. However, it |
| * will not wait for send completions. |
| */ |
| while (!test_bit(SDMA_REQ_SEND_DONE, &req->flags)) { |
| ret = user_sdma_send_pkts(req, pcount); |
| if (ret < 0) { |
| if (ret != -EBUSY) { |
| req->status = ret; |
| set_bit(SDMA_REQ_DONE_ERROR, &req->flags); |
| if (ACCESS_ONCE(req->seqcomp) == |
| req->seqsubmitted - 1) |
| goto free_req; |
| return ret; |
| } |
| wait_event_interruptible_timeout( |
| pq->busy.wait_dma, |
| (pq->state == SDMA_PKT_Q_ACTIVE), |
| msecs_to_jiffies( |
| SDMA_IOWAIT_TIMEOUT)); |
| } |
| } |
| *count += idx; |
| return 0; |
| free_req: |
| user_sdma_free_request(req, true); |
| if (req_queued) |
| pq_update(pq); |
| set_comp_state(pq, cq, info.comp_idx, ERROR, req->status); |
| return ret; |
| } |
| |
| static inline u32 compute_data_length(struct user_sdma_request *req, |
| struct user_sdma_txreq *tx) |
| { |
| /* |
| * Determine the proper size of the packet data. |
| * The size of the data of the first packet is in the header |
| * template. However, it includes the header and ICRC, which need |
| * to be subtracted. |
| * The minimum representable packet data length in a header is 4 bytes, |
| * therefore, when the data length request is less than 4 bytes, there's |
| * only one packet, and the packet data length is equal to that of the |
| * request data length. |
| * The size of the remaining packets is the minimum of the frag |
| * size (MTU) or remaining data in the request. |
| */ |
| u32 len; |
| |
| if (!req->seqnum) { |
| if (req->data_len < sizeof(u32)) |
| len = req->data_len; |
| else |
| len = ((be16_to_cpu(req->hdr.lrh[2]) << 2) - |
| (sizeof(tx->hdr) - 4)); |
| } else if (req_opcode(req->info.ctrl) == EXPECTED) { |
| u32 tidlen = EXP_TID_GET(req->tids[req->tididx], LEN) * |
| PAGE_SIZE; |
| /* |
| * Get the data length based on the remaining space in the |
| * TID pair. |
| */ |
| len = min(tidlen - req->tidoffset, (u32)req->info.fragsize); |
| /* If we've filled up the TID pair, move to the next one. */ |
| if (unlikely(!len) && ++req->tididx < req->n_tids && |
| req->tids[req->tididx]) { |
| tidlen = EXP_TID_GET(req->tids[req->tididx], |
| LEN) * PAGE_SIZE; |
| req->tidoffset = 0; |
| len = min_t(u32, tidlen, req->info.fragsize); |
| } |
| /* |
| * Since the TID pairs map entire pages, make sure that we |
| * are not going to try to send more data that we have |
| * remaining. |
| */ |
| len = min(len, req->data_len - req->sent); |
| } else { |
| len = min(req->data_len - req->sent, (u32)req->info.fragsize); |
| } |
| SDMA_DBG(req, "Data Length = %u", len); |
| return len; |
| } |
| |
| static inline u32 pad_len(u32 len) |
| { |
| if (len & (sizeof(u32) - 1)) |
| len += sizeof(u32) - (len & (sizeof(u32) - 1)); |
| return len; |
| } |
| |
| static inline u32 get_lrh_len(struct hfi1_pkt_header hdr, u32 len) |
| { |
| /* (Size of complete header - size of PBC) + 4B ICRC + data length */ |
| return ((sizeof(hdr) - sizeof(hdr.pbc)) + 4 + len); |
| } |
| |
| static int user_sdma_send_pkts(struct user_sdma_request *req, unsigned maxpkts) |
| { |
| int ret = 0, count; |
| unsigned npkts = 0; |
| struct user_sdma_txreq *tx = NULL; |
| struct hfi1_user_sdma_pkt_q *pq = NULL; |
| struct user_sdma_iovec *iovec = NULL; |
| |
| if (!req->pq) |
| return -EINVAL; |
| |
| pq = req->pq; |
| |
| /* If tx completion has reported an error, we are done. */ |
| if (test_bit(SDMA_REQ_HAS_ERROR, &req->flags)) { |
| set_bit(SDMA_REQ_DONE_ERROR, &req->flags); |
| return -EFAULT; |
| } |
| |
| /* |
| * Check if we might have sent the entire request already |
| */ |
| if (unlikely(req->seqnum == req->info.npkts)) { |
| if (!list_empty(&req->txps)) |
| goto dosend; |
| return ret; |
| } |
| |
| if (!maxpkts || maxpkts > req->info.npkts - req->seqnum) |
| maxpkts = req->info.npkts - req->seqnum; |
| |
| while (npkts < maxpkts) { |
| u32 datalen = 0, queued = 0, data_sent = 0; |
| u64 iov_offset = 0; |
| |
| /* |
| * Check whether any of the completions have come back |
| * with errors. If so, we are not going to process any |
| * more packets from this request. |
| */ |
| if (test_bit(SDMA_REQ_HAS_ERROR, &req->flags)) { |
| set_bit(SDMA_REQ_DONE_ERROR, &req->flags); |
| return -EFAULT; |
| } |
| |
| tx = kmem_cache_alloc(pq->txreq_cache, GFP_KERNEL); |
| if (!tx) |
| return -ENOMEM; |
| |
| tx->flags = 0; |
| tx->req = req; |
| tx->busycount = 0; |
| INIT_LIST_HEAD(&tx->list); |
| |
| if (req->seqnum == req->info.npkts - 1) |
| tx->flags |= TXREQ_FLAGS_REQ_LAST_PKT; |
| |
| /* |
| * Calculate the payload size - this is min of the fragment |
| * (MTU) size or the remaining bytes in the request but only |
| * if we have payload data. |
| */ |
| if (req->data_len) { |
| iovec = &req->iovs[req->iov_idx]; |
| if (ACCESS_ONCE(iovec->offset) == iovec->iov.iov_len) { |
| if (++req->iov_idx == req->data_iovs) { |
| ret = -EFAULT; |
| goto free_txreq; |
| } |
| iovec = &req->iovs[req->iov_idx]; |
| WARN_ON(iovec->offset); |
| } |
| |
| datalen = compute_data_length(req, tx); |
| if (!datalen) { |
| SDMA_DBG(req, |
| "Request has data but pkt len is 0"); |
| ret = -EFAULT; |
| goto free_tx; |
| } |
| } |
| |
| if (test_bit(SDMA_REQ_HAVE_AHG, &req->flags)) { |
| if (!req->seqnum) { |
| u16 pbclen = le16_to_cpu(req->hdr.pbc[0]); |
| u32 lrhlen = get_lrh_len(req->hdr, |
| pad_len(datalen)); |
| /* |
| * Copy the request header into the tx header |
| * because the HW needs a cacheline-aligned |
| * address. |
| * This copy can be optimized out if the hdr |
| * member of user_sdma_request were also |
| * cacheline aligned. |
| */ |
| memcpy(&tx->hdr, &req->hdr, sizeof(tx->hdr)); |
| if (PBC2LRH(pbclen) != lrhlen) { |
| pbclen = (pbclen & 0xf000) | |
| LRH2PBC(lrhlen); |
| tx->hdr.pbc[0] = cpu_to_le16(pbclen); |
| } |
| ret = sdma_txinit_ahg(&tx->txreq, |
| SDMA_TXREQ_F_AHG_COPY, |
| sizeof(tx->hdr) + datalen, |
| req->ahg_idx, 0, NULL, 0, |
| user_sdma_txreq_cb); |
| if (ret) |
| goto free_tx; |
| ret = sdma_txadd_kvaddr(pq->dd, &tx->txreq, |
| &tx->hdr, |
| sizeof(tx->hdr)); |
| if (ret) |
| goto free_txreq; |
| } else { |
| int changes; |
| |
| changes = set_txreq_header_ahg(req, tx, |
| datalen); |
| if (changes < 0) |
| goto free_tx; |
| sdma_txinit_ahg(&tx->txreq, |
| SDMA_TXREQ_F_USE_AHG, |
| datalen, req->ahg_idx, changes, |
| req->ahg, sizeof(req->hdr), |
| user_sdma_txreq_cb); |
| } |
| } else { |
| ret = sdma_txinit(&tx->txreq, 0, sizeof(req->hdr) + |
| datalen, user_sdma_txreq_cb); |
| if (ret) |
| goto free_tx; |
| /* |
| * Modify the header for this packet. This only needs |
| * to be done if we are not going to use AHG. Otherwise, |
| * the HW will do it based on the changes we gave it |
| * during sdma_txinit_ahg(). |
| */ |
| ret = set_txreq_header(req, tx, datalen); |
| if (ret) |
| goto free_txreq; |
| } |
| |
| /* |
| * If the request contains any data vectors, add up to |
| * fragsize bytes to the descriptor. |
| */ |
| while (queued < datalen && |
| (req->sent + data_sent) < req->data_len) { |
| unsigned long base, offset; |
| unsigned pageidx, len; |
| |
| base = (unsigned long)iovec->iov.iov_base; |
| offset = offset_in_page(base + iovec->offset + |
| iov_offset); |
| pageidx = (((iovec->offset + iov_offset + |
| base) - (base & PAGE_MASK)) >> PAGE_SHIFT); |
| len = offset + req->info.fragsize > PAGE_SIZE ? |
| PAGE_SIZE - offset : req->info.fragsize; |
| len = min((datalen - queued), len); |
| ret = sdma_txadd_page(pq->dd, &tx->txreq, |
| iovec->pages[pageidx], |
| offset, len); |
| if (ret) { |
| SDMA_DBG(req, "SDMA txreq add page failed %d\n", |
| ret); |
| goto free_txreq; |
| } |
| iov_offset += len; |
| queued += len; |
| data_sent += len; |
| if (unlikely(queued < datalen && |
| pageidx == iovec->npages && |
| req->iov_idx < req->data_iovs - 1)) { |
| iovec->offset += iov_offset; |
| iovec = &req->iovs[++req->iov_idx]; |
| iov_offset = 0; |
| } |
| } |
| /* |
| * The txreq was submitted successfully so we can update |
| * the counters. |
| */ |
| req->koffset += datalen; |
| if (req_opcode(req->info.ctrl) == EXPECTED) |
| req->tidoffset += datalen; |
| req->sent += data_sent; |
| if (req->data_len) |
| iovec->offset += iov_offset; |
| list_add_tail(&tx->txreq.list, &req->txps); |
| /* |
| * It is important to increment this here as it is used to |
| * generate the BTH.PSN and, therefore, can't be bulk-updated |
| * outside of the loop. |
| */ |
| tx->seqnum = req->seqnum++; |
| npkts++; |
| } |
| dosend: |
| ret = sdma_send_txlist(req->sde, &pq->busy, &req->txps, &count); |
| req->seqsubmitted += count; |
| if (req->seqsubmitted == req->info.npkts) { |
| set_bit(SDMA_REQ_SEND_DONE, &req->flags); |
| /* |
| * The txreq has already been submitted to the HW queue |
| * so we can free the AHG entry now. Corruption will not |
| * happen due to the sequential manner in which |
| * descriptors are processed. |
| */ |
| if (test_bit(SDMA_REQ_HAVE_AHG, &req->flags)) |
| sdma_ahg_free(req->sde, req->ahg_idx); |
| } |
| return ret; |
| |
| free_txreq: |
| sdma_txclean(pq->dd, &tx->txreq); |
| free_tx: |
| kmem_cache_free(pq->txreq_cache, tx); |
| return ret; |
| } |
| |
| /* |
| * How many pages in this iovec element? |
| */ |
| static inline int num_user_pages(const struct iovec *iov) |
| { |
| const unsigned long addr = (unsigned long)iov->iov_base; |
| const unsigned long len = iov->iov_len; |
| const unsigned long spage = addr & PAGE_MASK; |
| const unsigned long epage = (addr + len - 1) & PAGE_MASK; |
| |
| return 1 + ((epage - spage) >> PAGE_SHIFT); |
| } |
| |
| static u32 sdma_cache_evict(struct hfi1_user_sdma_pkt_q *pq, u32 npages) |
| { |
| struct evict_data evict_data; |
| |
| evict_data.cleared = 0; |
| evict_data.target = npages; |
| hfi1_mmu_rb_evict(pq->handler, &evict_data); |
| return evict_data.cleared; |
| } |
| |
| static int pin_vector_pages(struct user_sdma_request *req, |
| struct user_sdma_iovec *iovec) |
| { |
| int ret = 0, pinned, npages, cleared; |
| struct page **pages; |
| struct hfi1_user_sdma_pkt_q *pq = req->pq; |
| struct sdma_mmu_node *node = NULL; |
| struct mmu_rb_node *rb_node; |
| |
| rb_node = hfi1_mmu_rb_extract(pq->handler, |
| (unsigned long)iovec->iov.iov_base, |
| iovec->iov.iov_len); |
| if (rb_node) |
| node = container_of(rb_node, struct sdma_mmu_node, rb); |
| else |
| rb_node = NULL; |
| |
| if (!node) { |
| node = kzalloc(sizeof(*node), GFP_KERNEL); |
| if (!node) |
| return -ENOMEM; |
| |
| node->rb.addr = (unsigned long)iovec->iov.iov_base; |
| node->pq = pq; |
| atomic_set(&node->refcount, 0); |
| } |
| |
| npages = num_user_pages(&iovec->iov); |
| if (node->npages < npages) { |
| pages = kcalloc(npages, sizeof(*pages), GFP_KERNEL); |
| if (!pages) { |
| SDMA_DBG(req, "Failed page array alloc"); |
| ret = -ENOMEM; |
| goto bail; |
| } |
| memcpy(pages, node->pages, node->npages * sizeof(*pages)); |
| |
| npages -= node->npages; |
| |
| retry: |
| if (!hfi1_can_pin_pages(pq->dd, pq->mm, |
| atomic_read(&pq->n_locked), npages)) { |
| cleared = sdma_cache_evict(pq, npages); |
| if (cleared >= npages) |
| goto retry; |
| } |
| pinned = hfi1_acquire_user_pages(pq->mm, |
| ((unsigned long)iovec->iov.iov_base + |
| (node->npages * PAGE_SIZE)), npages, 0, |
| pages + node->npages); |
| if (pinned < 0) { |
| kfree(pages); |
| ret = pinned; |
| goto bail; |
| } |
| if (pinned != npages) { |
| unpin_vector_pages(pq->mm, pages, node->npages, |
| pinned); |
| ret = -EFAULT; |
| goto bail; |
| } |
| kfree(node->pages); |
| node->rb.len = iovec->iov.iov_len; |
| node->pages = pages; |
| node->npages += pinned; |
| npages = node->npages; |
| atomic_add(pinned, &pq->n_locked); |
| } |
| iovec->pages = node->pages; |
| iovec->npages = npages; |
| iovec->node = node; |
| |
| ret = hfi1_mmu_rb_insert(req->pq->handler, &node->rb); |
| if (ret) { |
| atomic_sub(node->npages, &pq->n_locked); |
| iovec->node = NULL; |
| goto bail; |
| } |
| return 0; |
| bail: |
| if (rb_node) |
| unpin_vector_pages(pq->mm, node->pages, 0, node->npages); |
| kfree(node); |
| return ret; |
| } |
| |
| static void unpin_vector_pages(struct mm_struct *mm, struct page **pages, |
| unsigned start, unsigned npages) |
| { |
| hfi1_release_user_pages(mm, pages + start, npages, false); |
| kfree(pages); |
| } |
| |
| static int check_header_template(struct user_sdma_request *req, |
| struct hfi1_pkt_header *hdr, u32 lrhlen, |
| u32 datalen) |
| { |
| /* |
| * Perform safety checks for any type of packet: |
| * - transfer size is multiple of 64bytes |
| * - packet length is multiple of 4 bytes |
| * - packet length is not larger than MTU size |
| * |
| * These checks are only done for the first packet of the |
| * transfer since the header is "given" to us by user space. |
| * For the remainder of the packets we compute the values. |
| */ |
| if (req->info.fragsize % PIO_BLOCK_SIZE || lrhlen & 0x3 || |
| lrhlen > get_lrh_len(*hdr, req->info.fragsize)) |
| return -EINVAL; |
| |
| if (req_opcode(req->info.ctrl) == EXPECTED) { |
| /* |
| * The header is checked only on the first packet. Furthermore, |
| * we ensure that at least one TID entry is copied when the |
| * request is submitted. Therefore, we don't have to verify that |
| * tididx points to something sane. |
| */ |
| u32 tidval = req->tids[req->tididx], |
| tidlen = EXP_TID_GET(tidval, LEN) * PAGE_SIZE, |
| tididx = EXP_TID_GET(tidval, IDX), |
| tidctrl = EXP_TID_GET(tidval, CTRL), |
| tidoff; |
| __le32 kval = hdr->kdeth.ver_tid_offset; |
| |
| tidoff = KDETH_GET(kval, OFFSET) * |
| (KDETH_GET(req->hdr.kdeth.ver_tid_offset, OM) ? |
| KDETH_OM_LARGE : KDETH_OM_SMALL); |
| /* |
| * Expected receive packets have the following |
| * additional checks: |
| * - offset is not larger than the TID size |
| * - TIDCtrl values match between header and TID array |
| * - TID indexes match between header and TID array |
| */ |
| if ((tidoff + datalen > tidlen) || |
| KDETH_GET(kval, TIDCTRL) != tidctrl || |
| KDETH_GET(kval, TID) != tididx) |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* |
| * Correctly set the BTH.PSN field based on type of |
| * transfer - eager packets can just increment the PSN but |
| * expected packets encode generation and sequence in the |
| * BTH.PSN field so just incrementing will result in errors. |
| */ |
| static inline u32 set_pkt_bth_psn(__be32 bthpsn, u8 expct, u32 frags) |
| { |
| u32 val = be32_to_cpu(bthpsn), |
| mask = (HFI1_CAP_IS_KSET(EXTENDED_PSN) ? 0x7fffffffull : |
| 0xffffffull), |
| psn = val & mask; |
| if (expct) |
| psn = (psn & ~BTH_SEQ_MASK) | ((psn + frags) & BTH_SEQ_MASK); |
| else |
| psn = psn + frags; |
| return psn & mask; |
| } |
| |
| static int set_txreq_header(struct user_sdma_request *req, |
| struct user_sdma_txreq *tx, u32 datalen) |
| { |
| struct hfi1_user_sdma_pkt_q *pq = req->pq; |
| struct hfi1_pkt_header *hdr = &tx->hdr; |
| u16 pbclen; |
| int ret; |
| u32 tidval = 0, lrhlen = get_lrh_len(*hdr, pad_len(datalen)); |
| |
| /* Copy the header template to the request before modification */ |
| memcpy(hdr, &req->hdr, sizeof(*hdr)); |
| |
| /* |
| * Check if the PBC and LRH length are mismatched. If so |
| * adjust both in the header. |
| */ |
| pbclen = le16_to_cpu(hdr->pbc[0]); |
| if (PBC2LRH(pbclen) != lrhlen) { |
| pbclen = (pbclen & 0xf000) | LRH2PBC(lrhlen); |
| hdr->pbc[0] = cpu_to_le16(pbclen); |
| hdr->lrh[2] = cpu_to_be16(lrhlen >> 2); |
| /* |
| * Third packet |
| * This is the first packet in the sequence that has |
| * a "static" size that can be used for the rest of |
| * the packets (besides the last one). |
| */ |
| if (unlikely(req->seqnum == 2)) { |
| /* |
| * From this point on the lengths in both the |
| * PBC and LRH are the same until the last |
| * packet. |
| * Adjust the template so we don't have to update |
| * every packet |
| */ |
| req->hdr.pbc[0] = hdr->pbc[0]; |
| req->hdr.lrh[2] = hdr->lrh[2]; |
| } |
| } |
| /* |
| * We only have to modify the header if this is not the |
| * first packet in the request. Otherwise, we use the |
| * header given to us. |
| */ |
| if (unlikely(!req->seqnum)) { |
| ret = check_header_template(req, hdr, lrhlen, datalen); |
| if (ret) |
| return ret; |
| goto done; |
| } |
| |
| hdr->bth[2] = cpu_to_be32( |
| set_pkt_bth_psn(hdr->bth[2], |
| (req_opcode(req->info.ctrl) == EXPECTED), |
| req->seqnum)); |
| |
| /* Set ACK request on last packet */ |
| if (unlikely(tx->flags & TXREQ_FLAGS_REQ_LAST_PKT)) |
| hdr->bth[2] |= cpu_to_be32(1UL << 31); |
| |
| /* Set the new offset */ |
| hdr->kdeth.swdata[6] = cpu_to_le32(req->koffset); |
| /* Expected packets have to fill in the new TID information */ |
| if (req_opcode(req->info.ctrl) == EXPECTED) { |
| tidval = req->tids[req->tididx]; |
| /* |
| * If the offset puts us at the end of the current TID, |
| * advance everything. |
| */ |
| if ((req->tidoffset) == (EXP_TID_GET(tidval, LEN) * |
| PAGE_SIZE)) { |
| req->tidoffset = 0; |
| /* |
| * Since we don't copy all the TIDs, all at once, |
| * we have to check again. |
| */ |
| if (++req->tididx > req->n_tids - 1 || |
| !req->tids[req->tididx]) { |
| return -EINVAL; |
| } |
| tidval = req->tids[req->tididx]; |
| } |
| req->omfactor = EXP_TID_GET(tidval, LEN) * PAGE_SIZE >= |
| KDETH_OM_MAX_SIZE ? KDETH_OM_LARGE : KDETH_OM_SMALL; |
| /* Set KDETH.TIDCtrl based on value for this TID. */ |
| KDETH_SET(hdr->kdeth.ver_tid_offset, TIDCTRL, |
| EXP_TID_GET(tidval, CTRL)); |
| /* Set KDETH.TID based on value for this TID */ |
| KDETH_SET(hdr->kdeth.ver_tid_offset, TID, |
| EXP_TID_GET(tidval, IDX)); |
| /* Clear KDETH.SH only on the last packet */ |
| if (unlikely(tx->flags & TXREQ_FLAGS_REQ_LAST_PKT)) |
| KDETH_SET(hdr->kdeth.ver_tid_offset, SH, 0); |
| /* |
| * Set the KDETH.OFFSET and KDETH.OM based on size of |
| * transfer. |
| */ |
| SDMA_DBG(req, "TID offset %ubytes %uunits om%u", |
| req->tidoffset, req->tidoffset / req->omfactor, |
| req->omfactor != KDETH_OM_SMALL); |
| KDETH_SET(hdr->kdeth.ver_tid_offset, OFFSET, |
| req->tidoffset / req->omfactor); |
| KDETH_SET(hdr->kdeth.ver_tid_offset, OM, |
| req->omfactor != KDETH_OM_SMALL); |
| } |
| done: |
| trace_hfi1_sdma_user_header(pq->dd, pq->ctxt, pq->subctxt, |
| req->info.comp_idx, hdr, tidval); |
| return sdma_txadd_kvaddr(pq->dd, &tx->txreq, hdr, sizeof(*hdr)); |
| } |
| |
| static int set_txreq_header_ahg(struct user_sdma_request *req, |
| struct user_sdma_txreq *tx, u32 len) |
| { |
| int diff = 0; |
| struct hfi1_user_sdma_pkt_q *pq = req->pq; |
| struct hfi1_pkt_header *hdr = &req->hdr; |
| u16 pbclen = le16_to_cpu(hdr->pbc[0]); |
| u32 val32, tidval = 0, lrhlen = get_lrh_len(*hdr, pad_len(len)); |
| |
| if (PBC2LRH(pbclen) != lrhlen) { |
| /* PBC.PbcLengthDWs */ |
| AHG_HEADER_SET(req->ahg, diff, 0, 0, 12, |
| cpu_to_le16(LRH2PBC(lrhlen))); |
| /* LRH.PktLen (we need the full 16 bits due to byte swap) */ |
| AHG_HEADER_SET(req->ahg, diff, 3, 0, 16, |
| cpu_to_be16(lrhlen >> 2)); |
| } |
| |
| /* |
| * Do the common updates |
| */ |
| /* BTH.PSN and BTH.A */ |
| val32 = (be32_to_cpu(hdr->bth[2]) + req->seqnum) & |
| (HFI1_CAP_IS_KSET(EXTENDED_PSN) ? 0x7fffffff : 0xffffff); |
| if (unlikely(tx->flags & TXREQ_FLAGS_REQ_LAST_PKT)) |
| val32 |= 1UL << 31; |
| AHG_HEADER_SET(req->ahg, diff, 6, 0, 16, cpu_to_be16(val32 >> 16)); |
| AHG_HEADER_SET(req->ahg, diff, 6, 16, 16, cpu_to_be16(val32 & 0xffff)); |
| /* KDETH.Offset */ |
| AHG_HEADER_SET(req->ahg, diff, 15, 0, 16, |
| cpu_to_le16(req->koffset & 0xffff)); |
| AHG_HEADER_SET(req->ahg, diff, 15, 16, 16, |
| cpu_to_le16(req->koffset >> 16)); |
| if (req_opcode(req->info.ctrl) == EXPECTED) { |
| __le16 val; |
| |
| tidval = req->tids[req->tididx]; |
| |
| /* |
| * If the offset puts us at the end of the current TID, |
| * advance everything. |
| */ |
| if ((req->tidoffset) == (EXP_TID_GET(tidval, LEN) * |
| PAGE_SIZE)) { |
| req->tidoffset = 0; |
| /* |
| * Since we don't copy all the TIDs, all at once, |
| * we have to check again. |
| */ |
| if (++req->tididx > req->n_tids - 1 || |
| !req->tids[req->tididx]) { |
| return -EINVAL; |
| } |
| tidval = req->tids[req->tididx]; |
| } |
| req->omfactor = ((EXP_TID_GET(tidval, LEN) * |
| PAGE_SIZE) >= |
| KDETH_OM_MAX_SIZE) ? KDETH_OM_LARGE : |
| KDETH_OM_SMALL; |
| /* KDETH.OM and KDETH.OFFSET (TID) */ |
| AHG_HEADER_SET(req->ahg, diff, 7, 0, 16, |
| ((!!(req->omfactor - KDETH_OM_SMALL)) << 15 | |
| ((req->tidoffset / req->omfactor) & 0x7fff))); |
| /* KDETH.TIDCtrl, KDETH.TID */ |
| val = cpu_to_le16(((EXP_TID_GET(tidval, CTRL) & 0x3) << 10) | |
| (EXP_TID_GET(tidval, IDX) & 0x3ff)); |
| /* Clear KDETH.SH on last packet */ |
| if (unlikely(tx->flags & TXREQ_FLAGS_REQ_LAST_PKT)) { |
| val |= cpu_to_le16(KDETH_GET(hdr->kdeth.ver_tid_offset, |
| INTR) << |
| AHG_KDETH_INTR_SHIFT); |
| val &= cpu_to_le16(~(1U << 13)); |
| AHG_HEADER_SET(req->ahg, diff, 7, 16, 14, val); |
| } else { |
| AHG_HEADER_SET(req->ahg, diff, 7, 16, 12, val); |
| } |
| } |
| |
| trace_hfi1_sdma_user_header_ahg(pq->dd, pq->ctxt, pq->subctxt, |
| req->info.comp_idx, req->sde->this_idx, |
| req->ahg_idx, req->ahg, diff, tidval); |
| return diff; |
| } |
| |
| /* |
| * SDMA tx request completion callback. Called when the SDMA progress |
| * state machine gets notification that the SDMA descriptors for this |
| * tx request have been processed by the DMA engine. Called in |
| * interrupt context. |
| */ |
| static void user_sdma_txreq_cb(struct sdma_txreq *txreq, int status) |
| { |
| struct user_sdma_txreq *tx = |
| container_of(txreq, struct user_sdma_txreq, txreq); |
| struct user_sdma_request *req; |
| struct hfi1_user_sdma_pkt_q *pq; |
| struct hfi1_user_sdma_comp_q *cq; |
| u16 idx; |
| |
| if (!tx->req) |
| return; |
| |
| req = tx->req; |
| pq = req->pq; |
| cq = req->cq; |
| |
| if (status != SDMA_TXREQ_S_OK) { |
| SDMA_DBG(req, "SDMA completion with error %d", |
| status); |
| set_bit(SDMA_REQ_HAS_ERROR, &req->flags); |
| } |
| |
| req->seqcomp = tx->seqnum; |
| kmem_cache_free(pq->txreq_cache, tx); |
| tx = NULL; |
| |
| idx = req->info.comp_idx; |
| if (req->status == -1 && status == SDMA_TXREQ_S_OK) { |
| if (req->seqcomp == req->info.npkts - 1) { |
| req->status = 0; |
| user_sdma_free_request(req, false); |
| pq_update(pq); |
| set_comp_state(pq, cq, idx, COMPLETE, 0); |
| } |
| } else { |
| if (status != SDMA_TXREQ_S_OK) |
| req->status = status; |
| if (req->seqcomp == (ACCESS_ONCE(req->seqsubmitted) - 1) && |
| (test_bit(SDMA_REQ_SEND_DONE, &req->flags) || |
| test_bit(SDMA_REQ_DONE_ERROR, &req->flags))) { |
| user_sdma_free_request(req, false); |
| pq_update(pq); |
| set_comp_state(pq, cq, idx, ERROR, req->status); |
| } |
| } |
| } |
| |
| static inline void pq_update(struct hfi1_user_sdma_pkt_q *pq) |
| { |
| if (atomic_dec_and_test(&pq->n_reqs)) { |
| xchg(&pq->state, SDMA_PKT_Q_INACTIVE); |
| wake_up(&pq->wait); |
| } |
| } |
| |
| static void user_sdma_free_request(struct user_sdma_request *req, bool unpin) |
| { |
| if (!list_empty(&req->txps)) { |
| struct sdma_txreq *t, *p; |
| |
| list_for_each_entry_safe(t, p, &req->txps, list) { |
| struct user_sdma_txreq *tx = |
| container_of(t, struct user_sdma_txreq, txreq); |
| list_del_init(&t->list); |
| sdma_txclean(req->pq->dd, t); |
| kmem_cache_free(req->pq->txreq_cache, tx); |
| } |
| } |
| if (req->data_iovs) { |
| struct sdma_mmu_node *node; |
| int i; |
| |
| for (i = 0; i < req->data_iovs; i++) { |
| node = req->iovs[i].node; |
| if (!node) |
| continue; |
| |
| if (unpin) |
| hfi1_mmu_rb_remove(req->pq->handler, |
| &node->rb); |
| else |
| atomic_dec(&node->refcount); |
| } |
| } |
| kfree(req->tids); |
| clear_bit(req->info.comp_idx, req->pq->req_in_use); |
| } |
| |
| static inline void set_comp_state(struct hfi1_user_sdma_pkt_q *pq, |
| struct hfi1_user_sdma_comp_q *cq, |
| u16 idx, enum hfi1_sdma_comp_state state, |
| int ret) |
| { |
| hfi1_cdbg(SDMA, "[%u:%u:%u:%u] Setting completion status %u %d", |
| pq->dd->unit, pq->ctxt, pq->subctxt, idx, state, ret); |
| cq->comps[idx].status = state; |
| if (state == ERROR) |
| cq->comps[idx].errcode = -ret; |
| trace_hfi1_sdma_user_completion(pq->dd, pq->ctxt, pq->subctxt, |
| idx, state, ret); |
| } |
| |
| static bool sdma_rb_filter(struct mmu_rb_node *node, unsigned long addr, |
| unsigned long len) |
| { |
| return (bool)(node->addr == addr); |
| } |
| |
| static int sdma_rb_insert(void *arg, struct mmu_rb_node *mnode) |
| { |
| struct sdma_mmu_node *node = |
| container_of(mnode, struct sdma_mmu_node, rb); |
| |
| atomic_inc(&node->refcount); |
| return 0; |
| } |
| |
| /* |
| * Return 1 to remove the node from the rb tree and call the remove op. |
| * |
| * Called with the rb tree lock held. |
| */ |
| static int sdma_rb_evict(void *arg, struct mmu_rb_node *mnode, |
| void *evict_arg, bool *stop) |
| { |
| struct sdma_mmu_node *node = |
| container_of(mnode, struct sdma_mmu_node, rb); |
| struct evict_data *evict_data = evict_arg; |
| |
| /* is this node still being used? */ |
| if (atomic_read(&node->refcount)) |
| return 0; /* keep this node */ |
| |
| /* this node will be evicted, add its pages to our count */ |
| evict_data->cleared += node->npages; |
| |
| /* have enough pages been cleared? */ |
| if (evict_data->cleared >= evict_data->target) |
| *stop = true; |
| |
| return 1; /* remove this node */ |
| } |
| |
| static void sdma_rb_remove(void *arg, struct mmu_rb_node *mnode) |
| { |
| struct sdma_mmu_node *node = |
| container_of(mnode, struct sdma_mmu_node, rb); |
| |
| atomic_sub(node->npages, &node->pq->n_locked); |
| |
| unpin_vector_pages(node->pq->mm, node->pages, 0, node->npages); |
| |
| kfree(node); |
| } |
| |
| static int sdma_rb_invalidate(void *arg, struct mmu_rb_node *mnode) |
| { |
| struct sdma_mmu_node *node = |
| container_of(mnode, struct sdma_mmu_node, rb); |
| |
| if (!atomic_read(&node->refcount)) |
| return 1; |
| return 0; |
| } |