| /* |
| * Copyright 2004, Instant802 Networks, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/netdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/module.h> |
| #include <linux/if_arp.h> |
| #include <linux/types.h> |
| #include <net/ip.h> |
| #include <net/pkt_sched.h> |
| |
| #include <net/mac80211.h> |
| #include "ieee80211_i.h" |
| #include "wme.h" |
| |
| /* Default mapping in classifier to work with default |
| * queue setup. |
| */ |
| const int ieee802_1d_to_ac[8] = { 2, 3, 3, 2, 1, 1, 0, 0 }; |
| |
| static const char llc_ip_hdr[8] = {0xAA, 0xAA, 0x3, 0, 0, 0, 0x08, 0}; |
| |
| /* Given a data frame determine the 802.1p/1d tag to use. */ |
| static unsigned int classify_1d(struct sk_buff *skb) |
| { |
| unsigned int dscp; |
| |
| /* skb->priority values from 256->263 are magic values to |
| * directly indicate a specific 802.1d priority. This is used |
| * to allow 802.1d priority to be passed directly in from VLAN |
| * tags, etc. |
| */ |
| if (skb->priority >= 256 && skb->priority <= 263) |
| return skb->priority - 256; |
| |
| switch (skb->protocol) { |
| case __constant_htons(ETH_P_IP): |
| dscp = ip_hdr(skb)->tos & 0xfc; |
| break; |
| |
| default: |
| return 0; |
| } |
| |
| return dscp >> 5; |
| } |
| |
| |
| static int wme_downgrade_ac(struct sk_buff *skb) |
| { |
| switch (skb->priority) { |
| case 6: |
| case 7: |
| skb->priority = 5; /* VO -> VI */ |
| return 0; |
| case 4: |
| case 5: |
| skb->priority = 3; /* VI -> BE */ |
| return 0; |
| case 0: |
| case 3: |
| skb->priority = 2; /* BE -> BK */ |
| return 0; |
| default: |
| return -1; |
| } |
| } |
| |
| |
| /* Indicate which queue to use. */ |
| static u16 classify80211(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| |
| if (!ieee80211_is_data(hdr->frame_control)) { |
| /* management frames go on AC_VO queue, but are sent |
| * without QoS control fields */ |
| return 0; |
| } |
| |
| if (0 /* injected */) { |
| /* use AC from radiotap */ |
| } |
| |
| if (!ieee80211_is_data_qos(hdr->frame_control)) { |
| skb->priority = 0; /* required for correct WPA/11i MIC */ |
| return ieee802_1d_to_ac[skb->priority]; |
| } |
| |
| /* use the data classifier to determine what 802.1d tag the |
| * data frame has */ |
| skb->priority = classify_1d(skb); |
| |
| /* in case we are a client verify acm is not set for this ac */ |
| while (unlikely(local->wmm_acm & BIT(skb->priority))) { |
| if (wme_downgrade_ac(skb)) { |
| /* The old code would drop the packet in this |
| * case. |
| */ |
| return 0; |
| } |
| } |
| |
| /* look up which queue to use for frames with this 1d tag */ |
| return ieee802_1d_to_ac[skb->priority]; |
| } |
| |
| u16 ieee80211_select_queue(struct net_device *dev, struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct sta_info *sta; |
| u16 queue; |
| u8 tid; |
| |
| queue = classify80211(skb, dev); |
| if (unlikely(queue >= local->hw.queues)) |
| queue = local->hw.queues - 1; |
| |
| if (info->flags & IEEE80211_TX_CTL_REQUEUE) { |
| rcu_read_lock(); |
| sta = sta_info_get(local, hdr->addr1); |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; |
| if (sta) { |
| struct ieee80211_hw *hw = &local->hw; |
| int ampdu_queue = sta->tid_to_tx_q[tid]; |
| |
| if ((ampdu_queue < ieee80211_num_queues(hw)) && |
| test_bit(ampdu_queue, local->queue_pool)) { |
| queue = ampdu_queue; |
| info->flags |= IEEE80211_TX_CTL_AMPDU; |
| } else { |
| info->flags &= ~IEEE80211_TX_CTL_AMPDU; |
| } |
| } |
| rcu_read_unlock(); |
| |
| return queue; |
| } |
| |
| /* Now we know the 1d priority, fill in the QoS header if |
| * there is one. |
| */ |
| if (ieee80211_is_data_qos(hdr->frame_control)) { |
| u8 *p = ieee80211_get_qos_ctl(hdr); |
| u8 ack_policy = 0; |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; |
| if (local->wifi_wme_noack_test) |
| ack_policy |= QOS_CONTROL_ACK_POLICY_NOACK << |
| QOS_CONTROL_ACK_POLICY_SHIFT; |
| /* qos header is 2 bytes, second reserved */ |
| *p++ = ack_policy | tid; |
| *p = 0; |
| |
| rcu_read_lock(); |
| |
| sta = sta_info_get(local, hdr->addr1); |
| if (sta) { |
| int ampdu_queue = sta->tid_to_tx_q[tid]; |
| struct ieee80211_hw *hw = &local->hw; |
| |
| if ((ampdu_queue < ieee80211_num_queues(hw)) && |
| test_bit(ampdu_queue, local->queue_pool)) { |
| queue = ampdu_queue; |
| info->flags |= IEEE80211_TX_CTL_AMPDU; |
| } else { |
| info->flags &= ~IEEE80211_TX_CTL_AMPDU; |
| } |
| } |
| |
| rcu_read_unlock(); |
| } |
| |
| return queue; |
| } |
| |
| int ieee80211_ht_agg_queue_add(struct ieee80211_local *local, |
| struct sta_info *sta, u16 tid) |
| { |
| int i; |
| |
| /* XXX: currently broken due to cb/requeue use */ |
| return -EPERM; |
| |
| /* prepare the filter and save it for the SW queue |
| * matching the received HW queue */ |
| |
| if (!local->hw.ampdu_queues) |
| return -EPERM; |
| |
| /* try to get a Qdisc from the pool */ |
| for (i = local->hw.queues; i < ieee80211_num_queues(&local->hw); i++) |
| if (!test_and_set_bit(i, local->queue_pool)) { |
| ieee80211_stop_queue(local_to_hw(local), i); |
| sta->tid_to_tx_q[tid] = i; |
| |
| /* IF there are already pending packets |
| * on this tid first we need to drain them |
| * on the previous queue |
| * since HT is strict in order */ |
| #ifdef CONFIG_MAC80211_HT_DEBUG |
| if (net_ratelimit()) { |
| DECLARE_MAC_BUF(mac); |
| printk(KERN_DEBUG "allocated aggregation queue" |
| " %d tid %d addr %s pool=0x%lX\n", |
| i, tid, print_mac(mac, sta->sta.addr), |
| local->queue_pool[0]); |
| } |
| #endif /* CONFIG_MAC80211_HT_DEBUG */ |
| return 0; |
| } |
| |
| return -EAGAIN; |
| } |
| |
| /** |
| * the caller needs to hold netdev_get_tx_queue(local->mdev, X)->lock |
| */ |
| void ieee80211_ht_agg_queue_remove(struct ieee80211_local *local, |
| struct sta_info *sta, u16 tid, |
| u8 requeue) |
| { |
| int agg_queue = sta->tid_to_tx_q[tid]; |
| struct ieee80211_hw *hw = &local->hw; |
| |
| /* return the qdisc to the pool */ |
| clear_bit(agg_queue, local->queue_pool); |
| sta->tid_to_tx_q[tid] = ieee80211_num_queues(hw); |
| |
| if (requeue) { |
| ieee80211_requeue(local, agg_queue); |
| } else { |
| struct netdev_queue *txq; |
| spinlock_t *root_lock; |
| struct Qdisc *q; |
| |
| txq = netdev_get_tx_queue(local->mdev, agg_queue); |
| q = rcu_dereference(txq->qdisc); |
| root_lock = qdisc_lock(q); |
| |
| spin_lock_bh(root_lock); |
| qdisc_reset(q); |
| spin_unlock_bh(root_lock); |
| } |
| } |
| |
| void ieee80211_requeue(struct ieee80211_local *local, int queue) |
| { |
| struct netdev_queue *txq = netdev_get_tx_queue(local->mdev, queue); |
| struct sk_buff_head list; |
| spinlock_t *root_lock; |
| struct Qdisc *qdisc; |
| u32 len; |
| |
| rcu_read_lock_bh(); |
| |
| qdisc = rcu_dereference(txq->qdisc); |
| if (!qdisc || !qdisc->dequeue) |
| goto out_unlock; |
| |
| skb_queue_head_init(&list); |
| |
| root_lock = qdisc_root_lock(qdisc); |
| spin_lock(root_lock); |
| for (len = qdisc->q.qlen; len > 0; len--) { |
| struct sk_buff *skb = qdisc->dequeue(qdisc); |
| |
| if (skb) |
| __skb_queue_tail(&list, skb); |
| } |
| spin_unlock(root_lock); |
| |
| for (len = list.qlen; len > 0; len--) { |
| struct sk_buff *skb = __skb_dequeue(&list); |
| u16 new_queue; |
| |
| BUG_ON(!skb); |
| new_queue = ieee80211_select_queue(local->mdev, skb); |
| skb_set_queue_mapping(skb, new_queue); |
| |
| txq = netdev_get_tx_queue(local->mdev, new_queue); |
| |
| |
| qdisc = rcu_dereference(txq->qdisc); |
| root_lock = qdisc_root_lock(qdisc); |
| |
| spin_lock(root_lock); |
| qdisc_enqueue_root(skb, qdisc); |
| spin_unlock(root_lock); |
| } |
| |
| out_unlock: |
| rcu_read_unlock_bh(); |
| } |