arch/arm/boot/dts/rk3xxx.dtsi - kernel/msm-4.19 - Gitiles

 /*
  * Copyright (c) 2013 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
 #include "skeleton.dtsi"

 / {
 	interrupt-parent = <&gic>;

 	aliases {
 		ethernet0 = &emac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
 		i2c4 = &i2c4;
 		mshc0 = &emmc;
 		mshc1 = &mmc0;
 		mshc2 = &mmc1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
 		serial3 = &uart3;
 		spi0 = &spi0;
 		spi1 = &spi1;
 	};

 	amba {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;

 		dmac1_s: dma-controller@20018000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x20018000 0x4000>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 		};

 		dmac1_ns: dma-controller@2001c000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x2001c000 0x4000>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 			status = "disabled";
 		};

 		dmac2: dma-controller@20078000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x20078000 0x4000>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA2>;
 			clock-names = "apb_pclk";
 		};
 	};

 	xin24m: oscillator {
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 		#clock-cells = <0>;
 		clock-output-names = "xin24m";
 	};

 	L2: l2-cache-controller@10138000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x10138000 0x1000>;
 		cache-unified;
 		cache-level = <2>;
 	};

 	scu@1013c000 {
 		compatible = "arm,cortex-a9-scu";
 		reg = <0x1013c000 0x100>;
 	};

 	global_timer: global-timer@1013c200 {
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 0x304>;
 		clocks = <&cru CORE_PERI>;
 	};

 	local_timer: local-timer@1013c600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x1013c600 0x20>;
 		interrupts = <GIC_PPI 13 0x304>;
 		clocks = <&cru CORE_PERI>;
 	};

 	gic: interrupt-controller@1013d000 {
 		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
 		reg = <0x1013d000 0x1000>,
 		      <0x1013c100 0x0100>;
 	};

 	uart0: serial@10124000 {
 		compatible = "snps,dw-apb-uart";
 		reg = <0x10124000 0x400>;
 		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <1>;
 		clock-names = "baudclk", "apb_pclk";
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		status = "disabled";
 	};

 	uart1: serial@10126000 {
 		compatible = "snps,dw-apb-uart";
 		reg = <0x10126000 0x400>;
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <1>;
 		clock-names = "baudclk", "apb_pclk";
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		status = "disabled";
 	};

 	usb_otg: usb@10180000 {
 		compatible = "rockchip,rk3066-usb", "snps,dwc2";
 		reg = <0x10180000 0x40000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG0>;
 		clock-names = "otg";
 		dr_mode = "otg";
 		g-np-tx-fifo-size = <16>;
 		g-rx-fifo-size = <275>;
 		g-tx-fifo-size = <256 128 128 64 64 32>;
 		g-use-dma;
 		phys = <&usbphy0>;
 		phy-names = "usb2-phy";
 		status = "disabled";
 	};

 	usb_host: usb@101c0000 {
 		compatible = "snps,dwc2";
 		reg = <0x101c0000 0x40000>;
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG1>;
 		clock-names = "otg";
 		dr_mode = "host";
 		phys = <&usbphy1>;
 		phy-names = "usb2-phy";
 		status = "disabled";
 	};

 	emac: ethernet@10204000 {
 		compatible = "snps,arc-emac";
 		reg = <0x10204000 0x3c>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;

 		rockchip,grf = <&grf>;

 		clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
 		clock-names = "hclk", "macref";
 		max-speed = <100>;
 		phy-mode = "rmii";

 		status = "disabled";
 	};

 	mmc0: dwmmc@10214000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x10214000 0x1000>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <256>;
 		status = "disabled";
 	};

 	mmc1: dwmmc@10218000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x10218000 0x1000>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <256>;
 		status = "disabled";
 	};

 	emmc: dwmmc@1021c000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x1021c000 0x1000>;
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
 		clock-names = "biu", "ciu";
 		fifo-depth = <256>;
 		status = "disabled";
 	};

 	pmu: pmu@20004000 {
 		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
 		reg = <0x20004000 0x100>;

 		reboot-mode {
 			compatible = "syscon-reboot-mode";
 			offset = <0x40>;
 			mode-normal = <BOOT_NORMAL>;
 			mode-recovery = <BOOT_RECOVERY>;
 			mode-bootloader = <BOOT_FASTBOOT>;
 			mode-loader = <BOOT_BL_DOWNLOAD>;
 		};
 	};

 	grf: grf@20008000 {
 		compatible = "syscon";
 		reg = <0x20008000 0x200>;
 	};

 	i2c0: i2c@2002d000 {
 		compatible = "rockchip,rk3066-i2c";
 		reg = <0x2002d000 0x1000>;
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;

 		rockchip,grf = <&grf>;

 		clock-names = "i2c";
 		clocks = <&cru PCLK_I2C0>;

 		status = "disabled";
 	};

 	i2c1: i2c@2002f000 {
 		compatible = "rockchip,rk3066-i2c";
 		reg = <0x2002f000 0x1000>;
 		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;

 		rockchip,grf = <&grf>;

 		clocks = <&cru PCLK_I2C1>;
 		clock-names = "i2c";

 		status = "disabled";
 	};

 	pwm0: pwm@20030000 {
 		compatible = "rockchip,rk2928-pwm";
 		reg = <0x20030000 0x10>;
 		#pwm-cells = <2>;
 		clocks = <&cru PCLK_PWM01>;
 		status = "disabled";
 	};

 	pwm1: pwm@20030010 {
 		compatible = "rockchip,rk2928-pwm";
 		reg = <0x20030010 0x10>;
 		#pwm-cells = <2>;
 		clocks = <&cru PCLK_PWM01>;
 		status = "disabled";
 	};

 	wdt: watchdog@2004c000 {
 		compatible = "snps,dw-wdt";
 		reg = <0x2004c000 0x100>;
 		clocks = <&cru PCLK_WDT>;
 		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 	};

 	pwm2: pwm@20050020 {
 		compatible = "rockchip,rk2928-pwm";
 		reg = <0x20050020 0x10>;
 		#pwm-cells = <2>;
 		clocks = <&cru PCLK_PWM23>;
 		status = "disabled";
 	};

 	pwm3: pwm@20050030 {
 		compatible = "rockchip,rk2928-pwm";
 		reg = <0x20050030 0x10>;
 		#pwm-cells = <2>;
 		clocks = <&cru PCLK_PWM23>;
 		status = "disabled";
 	};

 	i2c2: i2c@20056000 {
 		compatible = "rockchip,rk3066-i2c";
 		reg = <0x20056000 0x1000>;
 		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;

 		rockchip,grf = <&grf>;

 		clocks = <&cru PCLK_I2C2>;
 		clock-names = "i2c";

 		status = "disabled";
 	};

 	i2c3: i2c@2005a000 {
 		compatible = "rockchip,rk3066-i2c";
 		reg = <0x2005a000 0x1000>;
 		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;

 		rockchip,grf = <&grf>;

 		clocks = <&cru PCLK_I2C3>;
 		clock-names = "i2c";

 		status = "disabled";
 	};

 	i2c4: i2c@2005e000 {
 		compatible = "rockchip,rk3066-i2c";
 		reg = <0x2005e000 0x1000>;
 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;

 		rockchip,grf = <&grf>;

 		clocks = <&cru PCLK_I2C4>;
 		clock-names = "i2c";

 		status = "disabled";
 	};

 	uart2: serial@20064000 {
 		compatible = "snps,dw-apb-uart";
 		reg = <0x20064000 0x400>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <1>;
 		clock-names = "baudclk", "apb_pclk";
 		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 		status = "disabled";
 	};

 	uart3: serial@20068000 {
 		compatible = "snps,dw-apb-uart";
 		reg = <0x20068000 0x400>;
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <1>;
 		clock-names = "baudclk", "apb_pclk";
 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 		status = "disabled";
 	};

 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
 		reg = <0x2006c000 0x100>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		#io-channel-cells = <1>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
 		resets = <&cru SRST_SARADC>;
 		reset-names = "saradc-apb";
 		status = "disabled";
 	};

 	spi0: spi@20070000 {
 		compatible = "rockchip,rk3066-spi";
 		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
 		clock-names = "spiclk", "apb_pclk";
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x20070000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		dmas = <&dmac2 10>, <&dmac2 11>;
 		dma-names = "tx", "rx";
 		status = "disabled";
 	};

 	spi1: spi@20074000 {
 		compatible = "rockchip,rk3066-spi";
 		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
 		clock-names = "spiclk", "apb_pclk";
 		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x20074000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		dmas = <&dmac2 12>, <&dmac2 13>;
 		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 };
	/*
	* Copyright (c) 2013 MundoReader S.L.
	* Author: Heiko Stuebner <heiko@sntech.de>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#include <dt-bindings/interrupt-controller/irq.h>
	#include <dt-bindings/interrupt-controller/arm-gic.h>
	#include <dt-bindings/soc/rockchip,boot-mode.h>
	#include "skeleton.dtsi"

	/ {
	interrupt-parent = <&gic>;

	aliases {
	ethernet0 = &emac;
	i2c0 = &i2c0;
	i2c1 = &i2c1;
	i2c2 = &i2c2;
	i2c3 = &i2c3;
	i2c4 = &i2c4;
	mshc0 = &emmc;
	mshc1 = &mmc0;
	mshc2 = &mmc1;
	serial0 = &uart0;
	serial1 = &uart1;
	serial2 = &uart2;
	serial3 = &uart3;
	spi0 = &spi0;
	spi1 = &spi1;
	};

	amba {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;

	dmac1_s: dma-controller@20018000 {
	compatible = "arm,pl330", "arm,primecell";
	reg = <0x20018000 0x4000>;
	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
	#dma-cells = <1>;
	arm,pl330-broken-no-flushp;
	clocks = <&cru ACLK_DMA1>;
	clock-names = "apb_pclk";
	};

	dmac1_ns: dma-controller@2001c000 {
	compatible = "arm,pl330", "arm,primecell";
	reg = <0x2001c000 0x4000>;
	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
	#dma-cells = <1>;
	arm,pl330-broken-no-flushp;
	clocks = <&cru ACLK_DMA1>;
	clock-names = "apb_pclk";
	status = "disabled";
	};

	dmac2: dma-controller@20078000 {
	compatible = "arm,pl330", "arm,primecell";
	reg = <0x20078000 0x4000>;
	interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
	#dma-cells = <1>;
	arm,pl330-broken-no-flushp;
	clocks = <&cru ACLK_DMA2>;
	clock-names = "apb_pclk";
	};
	};

	xin24m: oscillator {
	compatible = "fixed-clock";
	clock-frequency = <24000000>;
	#clock-cells = <0>;
	clock-output-names = "xin24m";
	};

	L2: l2-cache-controller@10138000 {
	compatible = "arm,pl310-cache";
	reg = <0x10138000 0x1000>;
	cache-unified;
	cache-level = <2>;
	};

	scu@1013c000 {
	compatible = "arm,cortex-a9-scu";
	reg = <0x1013c000 0x100>;
	};

	global_timer: global-timer@1013c200 {
	compatible = "arm,cortex-a9-global-timer";
	reg = <0x1013c200 0x20>;
	interrupts = <GIC_PPI 11 0x304>;
	clocks = <&cru CORE_PERI>;
	};

	local_timer: local-timer@1013c600 {
	compatible = "arm,cortex-a9-twd-timer";
	reg = <0x1013c600 0x20>;
	interrupts = <GIC_PPI 13 0x304>;
	clocks = <&cru CORE_PERI>;
	};

	gic: interrupt-controller@1013d000 {
	compatible = "arm,cortex-a9-gic";
	interrupt-controller;
	#interrupt-cells = <3>;
	reg = <0x1013d000 0x1000>,
	<0x1013c100 0x0100>;
	};

	uart0: serial@10124000 {
	compatible = "snps,dw-apb-uart";
	reg = <0x10124000 0x400>;
	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <1>;
	clock-names = "baudclk", "apb_pclk";
	clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
	status = "disabled";
	};

	uart1: serial@10126000 {
	compatible = "snps,dw-apb-uart";
	reg = <0x10126000 0x400>;
	interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <1>;
	clock-names = "baudclk", "apb_pclk";
	clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
	status = "disabled";
	};

	usb_otg: usb@10180000 {
	compatible = "rockchip,rk3066-usb", "snps,dwc2";
	reg = <0x10180000 0x40000>;
	interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&cru HCLK_OTG0>;
	clock-names = "otg";
	dr_mode = "otg";
	g-np-tx-fifo-size = <16>;
	g-rx-fifo-size = <275>;
	g-tx-fifo-size = <256 128 128 64 64 32>;
	g-use-dma;
	phys = <&usbphy0>;
	phy-names = "usb2-phy";
	status = "disabled";
	};

	usb_host: usb@101c0000 {
	compatible = "snps,dwc2";
	reg = <0x101c0000 0x40000>;
	interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&cru HCLK_OTG1>;
	clock-names = "otg";
	dr_mode = "host";
	phys = <&usbphy1>;
	phy-names = "usb2-phy";
	status = "disabled";
	};

	emac: ethernet@10204000 {
	compatible = "snps,arc-emac";
	reg = <0x10204000 0x3c>;
	interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
	#address-cells = <1>;
	#size-cells = <0>;

	rockchip,grf = <&grf>;

	clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
	clock-names = "hclk", "macref";
	max-speed = <100>;
	phy-mode = "rmii";

	status = "disabled";
	};

	mmc0: dwmmc@10214000 {
	compatible = "rockchip,rk2928-dw-mshc";
	reg = <0x10214000 0x1000>;
	interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
	clock-names = "biu", "ciu";
	fifo-depth = <256>;
	status = "disabled";
	};

	mmc1: dwmmc@10218000 {
	compatible = "rockchip,rk2928-dw-mshc";
	reg = <0x10218000 0x1000>;
	interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
	clock-names = "biu", "ciu";
	fifo-depth = <256>;
	status = "disabled";
	};

	emmc: dwmmc@1021c000 {
	compatible = "rockchip,rk2928-dw-mshc";
	reg = <0x1021c000 0x1000>;
	interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
	clock-names = "biu", "ciu";
	fifo-depth = <256>;
	status = "disabled";
	};

	pmu: pmu@20004000 {
	compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
	reg = <0x20004000 0x100>;

	reboot-mode {
	compatible = "syscon-reboot-mode";
	offset = <0x40>;
	mode-normal = <BOOT_NORMAL>;
	mode-recovery = <BOOT_RECOVERY>;
	mode-bootloader = <BOOT_FASTBOOT>;
	mode-loader = <BOOT_BL_DOWNLOAD>;
	};
	};

	grf: grf@20008000 {
	compatible = "syscon";
	reg = <0x20008000 0x200>;
	};

	i2c0: i2c@2002d000 {
	compatible = "rockchip,rk3066-i2c";
	reg = <0x2002d000 0x1000>;
	interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
	#address-cells = <1>;
	#size-cells = <0>;

	rockchip,grf = <&grf>;

	clock-names = "i2c";
	clocks = <&cru PCLK_I2C0>;

	status = "disabled";
	};

	i2c1: i2c@2002f000 {
	compatible = "rockchip,rk3066-i2c";
	reg = <0x2002f000 0x1000>;
	interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
	#address-cells = <1>;
	#size-cells = <0>;

	rockchip,grf = <&grf>;

	clocks = <&cru PCLK_I2C1>;
	clock-names = "i2c";

	status = "disabled";
	};

	pwm0: pwm@20030000 {
	compatible = "rockchip,rk2928-pwm";
	reg = <0x20030000 0x10>;
	#pwm-cells = <2>;
	clocks = <&cru PCLK_PWM01>;
	status = "disabled";
	};

	pwm1: pwm@20030010 {
	compatible = "rockchip,rk2928-pwm";
	reg = <0x20030010 0x10>;
	#pwm-cells = <2>;
	clocks = <&cru PCLK_PWM01>;
	status = "disabled";
	};

	wdt: watchdog@2004c000 {
	compatible = "snps,dw-wdt";
	reg = <0x2004c000 0x100>;
	clocks = <&cru PCLK_WDT>;
	interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	pwm2: pwm@20050020 {
	compatible = "rockchip,rk2928-pwm";
	reg = <0x20050020 0x10>;
	#pwm-cells = <2>;
	clocks = <&cru PCLK_PWM23>;
	status = "disabled";
	};

	pwm3: pwm@20050030 {
	compatible = "rockchip,rk2928-pwm";
	reg = <0x20050030 0x10>;
	#pwm-cells = <2>;
	clocks = <&cru PCLK_PWM23>;
	status = "disabled";
	};

	i2c2: i2c@20056000 {
	compatible = "rockchip,rk3066-i2c";
	reg = <0x20056000 0x1000>;
	interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
	#address-cells = <1>;
	#size-cells = <0>;

	rockchip,grf = <&grf>;

	clocks = <&cru PCLK_I2C2>;
	clock-names = "i2c";

	status = "disabled";
	};

	i2c3: i2c@2005a000 {
	compatible = "rockchip,rk3066-i2c";
	reg = <0x2005a000 0x1000>;
	interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
	#address-cells = <1>;
	#size-cells = <0>;

	rockchip,grf = <&grf>;

	clocks = <&cru PCLK_I2C3>;
	clock-names = "i2c";

	status = "disabled";
	};

	i2c4: i2c@2005e000 {
	compatible = "rockchip,rk3066-i2c";
	reg = <0x2005e000 0x1000>;
	interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
	#address-cells = <1>;
	#size-cells = <0>;

	rockchip,grf = <&grf>;

	clocks = <&cru PCLK_I2C4>;
	clock-names = "i2c";

	status = "disabled";
	};

	uart2: serial@20064000 {
	compatible = "snps,dw-apb-uart";
	reg = <0x20064000 0x400>;
	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <1>;
	clock-names = "baudclk", "apb_pclk";
	clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
	status = "disabled";
	};

	uart3: serial@20068000 {
	compatible = "snps,dw-apb-uart";
	reg = <0x20068000 0x400>;
	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <1>;
	clock-names = "baudclk", "apb_pclk";
	clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
	status = "disabled";
	};

	saradc: saradc@2006c000 {
	compatible = "rockchip,saradc";
	reg = <0x2006c000 0x100>;
	interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
	#io-channel-cells = <1>;
	clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
	clock-names = "saradc", "apb_pclk";
	resets = <&cru SRST_SARADC>;
	reset-names = "saradc-apb";
	status = "disabled";
	};

	spi0: spi@20070000 {
	compatible = "rockchip,rk3066-spi";
	clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
	clock-names = "spiclk", "apb_pclk";
	interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
	reg = <0x20070000 0x1000>;
	#address-cells = <1>;
	#size-cells = <0>;
	dmas = <&dmac2 10>, <&dmac2 11>;
	dma-names = "tx", "rx";
	status = "disabled";
	};

	spi1: spi@20074000 {
	compatible = "rockchip,rk3066-spi";
	clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
	clock-names = "spiclk", "apb_pclk";
	interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
	reg = <0x20074000 0x1000>;
	#address-cells = <1>;
	#size-cells = <0>;
	dmas = <&dmac2 12>, <&dmac2 13>;
	dma-names = "tx", "rx";
	status = "disabled";
	};
	};