Merge tag 'v3.16-rc6' into next/dt
Update to Linux 3.16-rc6 as a dependency for the broadcom changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/ABI/testing/sysfs-driver-tegra-fuse b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
new file mode 100644
index 0000000..69f5af6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-tegra-fuse
@@ -0,0 +1,11 @@
+What: /sys/devices/*/<our-device>/fuse
+Date: February 2014
+Contact: Peter De Schrijver <pdeschrijver@nvidia.com>
+Description: read-only access to the efuses on Tegra20, Tegra30, Tegra114
+ and Tegra124 SoC's from NVIDIA. The efuses contain write once
+ data programmed at the factory. The data is layed out in 32bit
+ words in LSB first format. Each bit represents a single value
+ as decoded from the fuse registers. Bits order/assignment
+ exactly matches the HW registers, including any unused bits.
+Users: any user space application which wants to read the efuses on
+ Tegra SoC's
diff --git a/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
new file mode 100644
index 0000000..8781073
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
@@ -0,0 +1,14 @@
+Marvell Armada 38x CA9 MPcore SoC Controller
+============================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
+
+- reg: should be the register base and length as documented in the
+ datasheet for the CA9 MPcore SoC Control registers
+
+mpcore-soc-ctrl@20d20 {
+ compatible = "marvell,armada-380-mpcore-soc-ctrl";
+ reg = <0x20d20 0x6c>;
+};
diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
index 389bed5..795cc78 100644
--- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
@@ -1,7 +1,10 @@
* Power Management Controller (PMC)
Required properties:
-- compatible: Should be "atmel,at91rm9200-pmc"
+- compatible: Should be "atmel,<chip>-pmc".
+ <chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12,
+ at91sam9x5, sama5d3
+
- reg: Should contain PMC registers location and length
Examples:
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp
new file mode 100644
index 0000000..cd236b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp
@@ -0,0 +1,41 @@
+========================================================
+Secondary CPU enable-method "marvell,berlin-smp" binding
+========================================================
+
+This document describes the "marvell,berlin-smp" method for enabling secondary
+CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should
+be defined in the "cpus" node.
+
+Enable method name: "marvell,berlin-smp"
+Compatible machines: "marvell,berlin2" and "marvell,berlin2q"
+Compatible CPUs: "marvell,pj4b" and "arm,cortex-a9"
+Related properties: (none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"marvell,berlin-cpu-ctrl"[1].
+
+Example:
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "marvell,berlin-smp";
+
+ cpu@0 {
+ compatible = "marvell,pj4b";
+ device_type = "cpu";
+ next-level-cache = <&l2>;
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "marvell,pj4b";
+ device_type = "cpu";
+ next-level-cache = <&l2>;
+ reg = <1>;
+ };
+ };
+
+--
+[1] arm/marvell,berlin.txt
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 1fe72a0..bc6dc17 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -152,7 +152,9 @@
"arm,cortex-a7"
"arm,cortex-a8"
"arm,cortex-a9"
+ "arm,cortex-a12"
"arm,cortex-a15"
+ "arm,cortex-a17"
"arm,cortex-a53"
"arm,cortex-a57"
"arm,cortex-m0"
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
index 94013a9..904de57 100644
--- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
@@ -24,6 +24,22 @@
...
}
+* Marvell Berlin CPU control bindings
+
+CPU control register allows various operations on CPUs, like resetting them
+independently.
+
+Required properties:
+- compatible: should be "marvell,berlin-cpu-ctrl"
+- reg: address and length of the register set
+
+Example:
+
+cpu-ctrl@f7dd0000 {
+ compatible = "marvell,berlin-cpu-ctrl";
+ reg = <0xf7dd0000 0x10000>;
+};
+
* Marvell Berlin2 chip control binding
Marvell Berlin SoCs have a chip control register set providing several
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index fb88585..4139db3 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -10,6 +10,7 @@
- compatible : Should be "ti,irq-crossbar"
- reg: Base address and the size of the crossbar registers.
- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
- ti,reg-size: Size of a individual register in bytes. Every individual
register is assumed to be of same size. Valid sizes are 1, 2, 4.
- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
@@ -17,11 +18,46 @@
so crossbar bar driver should not consider them as free
lines.
+Optional properties:
+- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for
+ SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
+ crossbar. These irqs have a crossbar register, but still cannot be used.
+
+- ti,irqs-safe-map: integer which maps to a safe configuration to use
+ when the interrupt controller irq is unused (when not provided, default is 0)
+
Examples:
crossbar_mpu: @4a020000 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
ti,max-irqs = <160>;
+ ti,max-crossbar-sources = <400>;
ti,reg-size = <2>;
ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+ ti,irqs-skip = <10 133 139 140>;
};
+
+Consumer:
+========
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
+Documentation/devicetree/bindings/arm/gic.txt for further details.
+
+An interrupt consumer on an SoC using crossbar will use:
+ interrupts = <GIC_SPI request_number interrupt_level>
+When the request number is between 0 to that described by
+"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
+request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
+quirky hardware mapping direct to GIC.
+
+Example:
+ device_x@0x4a023000 {
+ /* Crossbar 8 used */
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ ...
+ };
+
+ device_y@0x4a033000 {
+ /* Direct mapped GIC SPI 1 used */
+ interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index d22b216..0edc903 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -129,6 +129,9 @@
- AM437x GP EVM
compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
+- AM437x SK EVM: AM437x StarterKit Evaluation Module
+ compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+
- DRA742 EVM: Software Development Board for DRA742
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
new file mode 100644
index 0000000..79074da
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -0,0 +1,65 @@
+OMAP PRCM bindings
+
+Power Reset and Clock Manager lists the device clocks and clockdomains under
+a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it,
+each describing one module and the clock hierarchy under it. see [1] for
+documentation about the individual clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible: Must be one of:
+ "ti,am3-prcm"
+ "ti,am3-scrm"
+ "ti,am4-prcm"
+ "ti,am4-scrm"
+ "ti,omap2-prcm"
+ "ti,omap2-scrm"
+ "ti,omap3-prm"
+ "ti,omap3-cm"
+ "ti,omap3-scrm"
+ "ti,omap4-cm1"
+ "ti,omap4-prm"
+ "ti,omap4-cm2"
+ "ti,omap4-scrm"
+ "ti,omap5-prm"
+ "ti,omap5-cm-core-aon"
+ "ti,omap5-scrm"
+ "ti,omap5-cm-core"
+ "ti,dra7-prm"
+ "ti,dra7-cm-core-aon"
+ "ti,dra7-cm-core"
+- reg: Contains PRCM module register address range
+ (base address and length)
+- clocks: clocks for this module
+- clockdomains: clockdomains for this module
+
+Example:
+
+cm: cm@48004000 {
+ compatible = "ti,omap3-cm";
+ reg = <0x48004000 0x4000>;
+
+ cm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_clockdomains: clockdomains {
+ };
+}
+
+&cm_clocks {
+ omap2_32k_fck: omap_32k_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+};
+
+&cm_clockdomains {
+ core_l3_clkdm: core_l3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&sdrc_ick>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
index 558ed4b..73278c6 100644
--- a/Documentation/devicetree/bindings/arm/tegra.txt
+++ b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -30,6 +30,8 @@
nvidia,seaboard
nvidia,ventana
nvidia,whistler
+ toradex,apalis_t30
+ toradex,apalis_t30-eval
toradex,colibri_t20-512
toradex,iris
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt
new file mode 100644
index 0000000..b7adf4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt
@@ -0,0 +1,26 @@
+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+ clks: ccm@0021b000 {
+ #clock-cells = <1>;
+ compatible = "fsl,imx1-ccm";
+ reg = <0x0021b000 0x1000>;
+ };
+
+ pwm: pwm@00208000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx1-pwm";
+ reg = <0x00208000 0x1000>;
+ interrupts = <34>;
+ clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+ clock-names = "ipg", "per";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt
new file mode 100644
index 0000000..c3b0db4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.txt
@@ -0,0 +1,28 @@
+* Clock bindings for Freescale i.MX21
+
+Required properties:
+- compatible : Should be "fsl,imx21-ccm".
+- reg : Address and length of the register set.
+- interrupts : Should contain CCM interrupt.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+for the full list of i.MX21 clock IDs.
+
+Examples:
+ clks: ccm@10027000{
+ compatible = "fsl,imx21-ccm";
+ reg = <0x10027000 0x800>;
+ #clock-cells = <1>;
+ };
+
+ uart1: serial@1000a000 {
+ compatible = "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+ <&clks IMX21_CLK_PER1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt
index 6bc9fd2..cc05de9 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt
@@ -7,117 +7,22 @@
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX27
-clocks and IDs.
-
- Clock ID
- -----------------------
- dummy 0
- ckih 1
- ckil 2
- mpll 3
- spll 4
- mpll_main2 5
- ahb 6
- ipg 7
- nfc_div 8
- per1_div 9
- per2_div 10
- per3_div 11
- per4_div 12
- vpu_sel 13
- vpu_div 14
- usb_div 15
- cpu_sel 16
- clko_sel 17
- cpu_div 18
- clko_div 19
- ssi1_sel 20
- ssi2_sel 21
- ssi1_div 22
- ssi2_div 23
- clko_en 24
- ssi2_ipg_gate 25
- ssi1_ipg_gate 26
- slcdc_ipg_gate 27
- sdhc3_ipg_gate 28
- sdhc2_ipg_gate 29
- sdhc1_ipg_gate 30
- scc_ipg_gate 31
- sahara_ipg_gate 32
- rtc_ipg_gate 33
- pwm_ipg_gate 34
- owire_ipg_gate 35
- lcdc_ipg_gate 36
- kpp_ipg_gate 37
- iim_ipg_gate 38
- i2c2_ipg_gate 39
- i2c1_ipg_gate 40
- gpt6_ipg_gate 41
- gpt5_ipg_gate 42
- gpt4_ipg_gate 43
- gpt3_ipg_gate 44
- gpt2_ipg_gate 45
- gpt1_ipg_gate 46
- gpio_ipg_gate 47
- fec_ipg_gate 48
- emma_ipg_gate 49
- dma_ipg_gate 50
- cspi3_ipg_gate 51
- cspi2_ipg_gate 52
- cspi1_ipg_gate 53
- nfc_baud_gate 54
- ssi2_baud_gate 55
- ssi1_baud_gate 56
- vpu_baud_gate 57
- per4_gate 58
- per3_gate 59
- per2_gate 60
- per1_gate 61
- usb_ahb_gate 62
- slcdc_ahb_gate 63
- sahara_ahb_gate 64
- lcdc_ahb_gate 65
- vpu_ahb_gate 66
- fec_ahb_gate 67
- emma_ahb_gate 68
- emi_ahb_gate 69
- dma_ahb_gate 70
- csi_ahb_gate 71
- brom_ahb_gate 72
- ata_ahb_gate 73
- wdog_ipg_gate 74
- usb_ipg_gate 75
- uart6_ipg_gate 76
- uart5_ipg_gate 77
- uart4_ipg_gate 78
- uart3_ipg_gate 79
- uart2_ipg_gate 80
- uart1_ipg_gate 81
- ckih_div1p5 82
- fpm 83
- mpll_osc_sel 84
- mpll_sel 85
- spll_gate 86
- mshc_div 87
- rtic_ipg_gate 88
- mshc_ipg_gate 89
- rtic_ahb_gate 90
- mshc_baud_gate 91
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+for the full list of i.MX27 clock IDs.
Examples:
+ clks: ccm@10027000{
+ compatible = "fsl,imx27-ccm";
+ reg = <0x10027000 0x1000>;
+ #clock-cells = <1>;
+ };
-clks: ccm@10027000{
- compatible = "fsl,imx27-ccm";
- reg = <0x10027000 0x1000>;
- #clock-cells = <1>;
-};
-
-uart1: serial@1000a000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks 81>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
-};
+ uart1: serial@1000a000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 90ec91f..9252912 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -7,223 +7,13 @@
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. The following is a full list of i.MX6Q
-clocks and IDs.
-
- Clock ID
- ---------------------------
- dummy 0
- ckil 1
- ckih 2
- osc 3
- pll2_pfd0_352m 4
- pll2_pfd1_594m 5
- pll2_pfd2_396m 6
- pll3_pfd0_720m 7
- pll3_pfd1_540m 8
- pll3_pfd2_508m 9
- pll3_pfd3_454m 10
- pll2_198m 11
- pll3_120m 12
- pll3_80m 13
- pll3_60m 14
- twd 15
- step 16
- pll1_sw 17
- periph_pre 18
- periph2_pre 19
- periph_clk2_sel 20
- periph2_clk2_sel 21
- axi_sel 22
- esai_sel 23
- asrc_sel 24
- spdif_sel 25
- gpu2d_axi 26
- gpu3d_axi 27
- gpu2d_core_sel 28
- gpu3d_core_sel 29
- gpu3d_shader_sel 30
- ipu1_sel 31
- ipu2_sel 32
- ldb_di0_sel 33
- ldb_di1_sel 34
- ipu1_di0_pre_sel 35
- ipu1_di1_pre_sel 36
- ipu2_di0_pre_sel 37
- ipu2_di1_pre_sel 38
- ipu1_di0_sel 39
- ipu1_di1_sel 40
- ipu2_di0_sel 41
- ipu2_di1_sel 42
- hsi_tx_sel 43
- pcie_axi_sel 44
- ssi1_sel 45
- ssi2_sel 46
- ssi3_sel 47
- usdhc1_sel 48
- usdhc2_sel 49
- usdhc3_sel 50
- usdhc4_sel 51
- enfc_sel 52
- emi_sel 53
- emi_slow_sel 54
- vdo_axi_sel 55
- vpu_axi_sel 56
- cko1_sel 57
- periph 58
- periph2 59
- periph_clk2 60
- periph2_clk2 61
- ipg 62
- ipg_per 63
- esai_pred 64
- esai_podf 65
- asrc_pred 66
- asrc_podf 67
- spdif_pred 68
- spdif_podf 69
- can_root 70
- ecspi_root 71
- gpu2d_core_podf 72
- gpu3d_core_podf 73
- gpu3d_shader 74
- ipu1_podf 75
- ipu2_podf 76
- ldb_di0_podf 77
- ldb_di1_podf 78
- ipu1_di0_pre 79
- ipu1_di1_pre 80
- ipu2_di0_pre 81
- ipu2_di1_pre 82
- hsi_tx_podf 83
- ssi1_pred 84
- ssi1_podf 85
- ssi2_pred 86
- ssi2_podf 87
- ssi3_pred 88
- ssi3_podf 89
- uart_serial_podf 90
- usdhc1_podf 91
- usdhc2_podf 92
- usdhc3_podf 93
- usdhc4_podf 94
- enfc_pred 95
- enfc_podf 96
- emi_podf 97
- emi_slow_podf 98
- vpu_axi_podf 99
- cko1_podf 100
- axi 101
- mmdc_ch0_axi_podf 102
- mmdc_ch1_axi_podf 103
- arm 104
- ahb 105
- apbh_dma 106
- asrc 107
- can1_ipg 108
- can1_serial 109
- can2_ipg 110
- can2_serial 111
- ecspi1 112
- ecspi2 113
- ecspi3 114
- ecspi4 115
- ecspi5 116
- enet 117
- esai 118
- gpt_ipg 119
- gpt_ipg_per 120
- gpu2d_core 121
- gpu3d_core 122
- hdmi_iahb 123
- hdmi_isfr 124
- i2c1 125
- i2c2 126
- i2c3 127
- iim 128
- enfc 129
- ipu1 130
- ipu1_di0 131
- ipu1_di1 132
- ipu2 133
- ipu2_di0 134
- ldb_di0 135
- ldb_di1 136
- ipu2_di1 137
- hsi_tx 138
- mlb 139
- mmdc_ch0_axi 140
- mmdc_ch1_axi 141
- ocram 142
- openvg_axi 143
- pcie_axi 144
- pwm1 145
- pwm2 146
- pwm3 147
- pwm4 148
- per1_bch 149
- gpmi_bch_apb 150
- gpmi_bch 151
- gpmi_io 152
- gpmi_apb 153
- sata 154
- sdma 155
- spba 156
- ssi1 157
- ssi2 158
- ssi3 159
- uart_ipg 160
- uart_serial 161
- usboh3 162
- usdhc1 163
- usdhc2 164
- usdhc3 165
- usdhc4 166
- vdo_axi 167
- vpu_axi 168
- cko1 169
- pll1_sys 170
- pll2_bus 171
- pll3_usb_otg 172
- pll4_audio 173
- pll5_video 174
- pll8_mlb 175
- pll7_usb_host 176
- pll6_enet 177
- ssi1_ipg 178
- ssi2_ipg 179
- ssi3_ipg 180
- rom 181
- usbphy1 182
- usbphy2 183
- ldb_di0_div_3_5 184
- ldb_di1_div_3_5 185
- sata_ref 186
- sata_ref_100m 187
- pcie_ref 188
- pcie_ref_125m 189
- enet_ref 190
- usbphy1_gate 191
- usbphy2_gate 192
- pll4_post_div 193
- pll5_post_div 194
- pll5_video_div 195
- eim_slow 196
- spdif 197
- cko2_sel 198
- cko2_podf 199
- cko2 200
- cko 201
- vdoa 202
- pll4_audio_div 203
- lvds1_sel 204
- lvds2_sel 205
- lvds1_gate 206
- lvds2_gate 207
- esai_ahb 208
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
+for the full list of i.MX6 Quad and DualLite clock IDs.
Examples:
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
clks: ccm@020c4000 {
compatible = "fsl,imx6q-ccm";
reg = <0x020c4000 0x4000>;
@@ -235,7 +25,7 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
- clocks = <&clks 160>, <&clks 161>;
+ clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
new file mode 100644
index 0000000..0c2bf5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3188/RK3066 Clock and Reset Unit
+
+The RK3188/RK3066 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
+ "rockchip,rk3066a-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+Similar macros exist for the reset sources in these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "xin27m" - 27mhz crystal input on rk3066 - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_cif0" - external camera clock - optional,
+ - "ext_rmii" - external RMII clock - optional,
+ - "ext_jtag" - externalJTAG clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
new file mode 100644
index 0000000..c9fbb76
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3288 Clock and Reset Unit
+
+The RK3288 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3288-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_edp_24m" - external display port clock - optional,
+ - "ext_vip" - external VIP clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/rockchip.txt b/Documentation/devicetree/bindings/clock/rockchip.txt
index a891c82..22f6769 100644
--- a/Documentation/devicetree/bindings/clock/rockchip.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip.txt
@@ -6,6 +6,9 @@
== Gate clocks ==
+These bindings are deprecated!
+Please use the soc specific CRU bindings instead.
+
The gate registers form a continuos block which makes the dt node
structure a matter of taste, as either all gates can be put into
one gate clock spanning all registers or they can be divided into
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
new file mode 100644
index 0000000..d8c98c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
@@ -0,0 +1,40 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
+
+Required properties:
+- compatible : should be:
+ "nvidia,tegra20-efuse"
+ "nvidia,tegra30-efuse"
+ "nvidia,tegra114-efuse"
+ "nvidia,tegra124-efuse"
+ Details:
+ nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
+ due to a hardware bug. Tegra20 also lacks certain information which is
+ available in later generations such as fab code, lot code, wafer id,..
+ nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
+ The differences between these SoCs are the size of the efuse array,
+ the location of the spare (OEM programmable) bits and the location of
+ the speedo data.
+- reg: Should contain 1 entry: the entry gives the physical address and length
+ of the fuse registers.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - fuse
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - fuse
+
+Example:
+
+ fuse@7000f800 {
+ compatible = "nvidia,tegra20-efuse";
+ reg = <0x7000F800 0x400>,
+ <0x70000000 0x400>;
+ clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
+
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
new file mode 100644
index 0000000..23bfe8e1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -0,0 +1,43 @@
+NVIDIA GK20A Graphics Processing Unit
+
+Required properties:
+- compatible: "nvidia,<chip>-<gpu>"
+ Currently recognized values:
+ - nvidia,tegra124-gk20a
+- reg: Physical base address and length of the controller's registers.
+ Must contain two entries:
+ - first entry for bar0
+ - second entry for bar1
+- interrupts: Must contain an entry for each entry in interrupt-names.
+ See ../interrupt-controller/interrupts.txt for details.
+- interrupt-names: Must include the following entries:
+ - stall
+ - nonstall
+- vdd-supply: regulator for supply voltage.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - gpu
+ - pwr
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - gpu
+
+Example:
+
+ gpu@0,57000000 {
+ compatible = "nvidia,gk20a";
+ reg = <0x0 0x57000000 0x0 0x01000000>,
+ <0x0 0x58000000 0x0 0x01000000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "stall", "nonstall";
+ vdd-supply = <&vdd_gpu>;
+ clocks = <&tegra_car TEGRA124_CLK_GPU>,
+ <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+ clock-names = "gpu", "pwr";
+ resets = <&tegra_car 184>;
+ reset-names = "gpu";
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
new file mode 100644
index 0000000..b97b8be
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -0,0 +1,13 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
+
+Required properties:
+- compatible : should be:
+ "nvidia,tegra20-apbmisc"
+ "nvidia,tegra30-apbmisc"
+ "nvidia,tegra114-apbmisc"
+ "nvidia,tegra124-apbmisc"
+- reg: Should contain 2 entries: the first entry gives the physical address
+ and length of the registers which contain revision and debug features.
+ The second entry gives the physical address and length of the
+ registers indicating the strapping options.
+
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
new file mode 100644
index 0000000..2f9c0bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -0,0 +1,127 @@
+Device tree binding for NVIDIA Tegra XUSB pad controller
+========================================================
+
+The Tegra XUSB pad controller manages a set of lanes, each of which can be
+assigned to one out of a set of different pads. Some of these pads have an
+associated PHY that must be powered up before the pad can be used.
+
+This document defines the device-specific binding for the XUSB pad controller.
+
+Refer to pinctrl-bindings.txt in this directory for generic information about
+pin controller device tree bindings and ../phy/phy-bindings.txt for details on
+how to describe and reference PHYs in device trees.
+
+Required properties:
+--------------------
+- compatible: should be "nvidia,tegra124-xusb-padctl"
+- reg: Physical base address and length of the controller's registers.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - padctl
+- #phy-cells: Should be 1. The specifier is the index of the PHY to reference.
+ See <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> for the list of valid values.
+
+Lane muxing:
+------------
+
+Child nodes contain the pinmux configurations following the conventions from
+the pinctrl-bindings.txt document. Typically a single, static configuration is
+given and applied at boot time.
+
+Each subnode describes groups of lanes along with parameters and pads that
+they should be assigned to. The name of these subnodes is not important. All
+subnodes should be parsed solely based on their content.
+
+Each subnode only applies the parameters that are explicitly listed. In other
+words, if a subnode that lists a function but no pin configuration parameters
+implies no information about any pin configuration parameters. Similarly, a
+subnode that describes only an IDDQ parameter implies no information about
+what function the pins are assigned to. For this reason even seemingly boolean
+values are actually tristates in this binding: unspecified, off or on.
+Unspecified is represented as an absent property, and off/on are represented
+as integer values 0 and 1.
+
+Required properties:
+- nvidia,lanes: An array of strings. Each string is the name of a lane.
+
+Optional properties:
+- nvidia,function: A string that is the name of the function (pad) that the
+ pin or group should be assigned to. Valid values for function names are
+ listed below.
+- nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes)
+
+Note that not all of these properties are valid for all lanes. Lanes can be
+divided into three groups:
+
+ - otg-0, otg-1, otg-2:
+
+ Valid functions for this group are: "snps", "xusb", "uart", "rsvd".
+
+ The nvidia,iddq property does not apply to this group.
+
+ - ulpi-0, hsic-0, hsic-1:
+
+ Valid functions for this group are: "snps", "xusb".
+
+ The nvidia,iddq property does not apply to this group.
+
+ - pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0:
+
+ Valid functions for this group are: "pcie", "usb3", "sata", "rsvd".
+
+
+Example:
+========
+
+SoC file extract:
+-----------------
+
+ padctl@0,7009f000 {
+ compatible = "nvidia,tegra124-xusb-padctl";
+ reg = <0x0 0x7009f000 0x0 0x1000>;
+ resets = <&tegra_car 142>;
+ reset-names = "padctl";
+
+ #phy-cells = <1>;
+ };
+
+Board file extract:
+-------------------
+
+ pcie-controller@0,01003000 {
+ ...
+
+ phys = <&padctl 0>;
+ phy-names = "pcie";
+
+ ...
+ };
+
+ ...
+
+ padctl: padctl@0,7009f000 {
+ pinctrl-0 = <&padctl_default>;
+ pinctrl-names = "default";
+
+ padctl_default: pinmux {
+ usb3 {
+ nvidia,lanes = "pcie-0", "pcie-1";
+ nvidia,function = "usb3";
+ nvidia,iddq = <0>;
+ };
+
+ pcie {
+ nvidia,lanes = "pcie-2", "pcie-3",
+ "pcie-4";
+ nvidia,function = "pcie";
+ nvidia,iddq = <0>;
+ };
+
+ sata {
+ nvidia,lanes = "sata-0";
+ nvidia,function = "sata";
+ nvidia,iddq = <0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt
new file mode 100644
index 0000000..a3eb154
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.txt
@@ -0,0 +1,20 @@
+Binding for Cadence UART Controller
+
+Required properties:
+- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+- clocks: Must contain phandles to the UART clocks
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Tuple to identify input clocks, must contain "uart_clk" and "pclk"
+ See ../clocks/clock-bindings.txt for details.
+
+
+Example:
+ uart@e0000000 {
+ compatible = "cdns,uart-r1p8";
+ clocks = <&clkc 23>, <&clkc 40>;
+ clock-names = "uart_clk", "pclk";
+ reg = <0xE0000000 0x1000>;
+ interrupts = <0 27 4>;
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 46a311e..8ad3646 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -71,6 +71,7 @@
keymile Keymile GmbH
lacie LaCie
lantiq Lantiq Semiconductor
+lenovo Lenovo Group Ltd.
lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
@@ -122,6 +123,7 @@
sirf SiRF Technology, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
+solidrun SolidRun
spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 88acf8b..2cc99bf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1559,6 +1559,7 @@
default 416 if ARCH_SUNXI
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
+ default 288 if ARCH_ROCKCHIP
default 264 if MACH_H4700
default 0
help
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8f90595..8dcc00d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -582,7 +582,7 @@
on Rockchip based platforms.
config DEBUG_RK3X_UART0
- bool "Kernel low-level debugging messages via Rockchip RK3X UART0"
+ bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -590,7 +590,7 @@
on Rockchip based platforms.
config DEBUG_RK3X_UART1
- bool "Kernel low-level debugging messages via Rockchip RK3X UART1"
+ bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -598,7 +598,7 @@
on Rockchip based platforms.
config DEBUG_RK3X_UART2
- bool "Kernel low-level debugging messages via Rockchip RK3X UART2"
+ bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
@@ -606,13 +606,21 @@
on Rockchip based platforms.
config DEBUG_RK3X_UART3
- bool "Kernel low-level debugging messages via Rockchip RK3X UART3"
+ bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3"
depends on ARCH_ROCKCHIP
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
on Rockchip based platforms.
+ config DEBUG_RK32_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK32 UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RK32xx based platforms.
+
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
@@ -1096,6 +1104,7 @@
default 0xf991e000 if DEBUG_QCOM_UARTDM
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfe800000 if ARCH_IOP32X
+ default 0xff690000 if DEBUG_RK32_UART2
default 0xffc02000 if DEBUG_SOCFPGA_UART
default 0xffd82340 if ARCH_IOP13XX
default 0xfff36000 if DEBUG_HIGHBANK_UART
@@ -1152,6 +1161,7 @@
default 0xfec02000 if DEBUG_SOCFPGA_UART
default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
+ default 0xfec90000 if DEBUG_RK32_UART2
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
default 0xfed12000 if ARCH_KIRKWOOD
@@ -1186,7 +1196,7 @@
ARCH_KEYSTONE || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || \
- DEBUG_BCM_KONA_UART
+ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index adb5ed9..f79088e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -66,7 +66,9 @@
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos4210-universal_c210.dtb \
+ exynos4412-odroidu3.dtb \
exynos4412-odroidx.dtb \
+ exynos4412-odroidx2.dtb \
exynos4412-origen.dtb \
exynos4412-smdk4412.dtb \
exynos4412-tiny4412.dtb \
@@ -93,6 +95,7 @@
kirkwood := \
kirkwood-b3.dtb \
kirkwood-cloudbox.dtb \
+ kirkwood-d2net.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
kirkwood-dns320.dtb \
@@ -123,6 +126,8 @@
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
kirkwood-mv88f6281gtw-ge.dtb \
+ kirkwood-net2big.dtb \
+ kirkwood-net5big.dtb \
kirkwood-netgear_readynas_duo_v2.dtb \
kirkwood-netgear_readynas_nv+_v2.dtb \
kirkwood-ns2.dtb \
@@ -157,10 +162,14 @@
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MXC) += \
imx25-eukrea-mbimxsd25-baseboard.dtb \
+ imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
+ imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
+ imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
imx25-karo-tx25.dtb \
imx25-pdk.dtb \
imx27-apf27.dtb \
imx27-apf27dev.dtb \
+ imx27-eukrea-mbimxsd27-baseboard.dtb \
imx27-pdk.dtb \
imx27-phytec-phycore-rdk.dtb \
imx27-phytec-phycard-s-rdk.dtb \
@@ -182,6 +191,8 @@
imx53-tx53-x03x.dtb \
imx53-tx53-x13x.dtb \
imx53-voipac-bsb.dtb \
+ imx6dl-aristainetos_4.dtb \
+ imx6dl-aristainetos_7.dtb \
imx6dl-cubox-i.dtb \
imx6dl-dfi-fs700-m60.dtb \
imx6dl-gw51xx.dtb \
@@ -191,11 +202,16 @@
imx6dl-hummingboard.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-phytec-pbab01.dtb \
+ imx6dl-rex-basic.dtb \
imx6dl-riotboard.dtb \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
+ imx6dl-tx6dl-comtft.dtb \
+ imx6dl-tx6u-801x.dtb \
+ imx6dl-tx6u-811x.dtb \
imx6dl-wandboard.dtb \
+ imx6dl-wandboard-revb1.dtb \
imx6q-arm2.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
@@ -209,13 +225,21 @@
imx6q-gw54xx.dtb \
imx6q-nitrogen6x.dtb \
imx6q-phytec-pbab01.dtb \
+ imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
+ imx6q-wandboard-revb1.dtb \
+ imx6q-tx6q-1010.dtb \
+ imx6q-tx6q-1010-comtft.dtb \
+ imx6q-tx6q-1020.dtb \
+ imx6q-tx6q-1020-comtft.dtb \
+ imx6q-tx6q-1110.dtb \
imx6sl-evk.dtb \
+ imx6sx-sdb.dtb \
vf610-colibri.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
@@ -291,7 +315,8 @@
am335x-boneblack.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
- am335x-nano.dtb
+ am335x-nano.dtb \
+ am335x-pepper.dtb
dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
@@ -301,6 +326,7 @@
omap4-var-dvk-om44.dtb \
omap4-var-stk-om44.dtb
dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \
+ am437x-sk-evm.dtb \
am437x-gp-evm.dtb
dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \
omap5-sbc-t54.dtb \
@@ -318,6 +344,11 @@
qcom-apq8084-mtp.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+ rk3066a-bqcurie2.dtb \
+ rk3188-radxarock.dtb \
+ rk3288-evb-act8846.dtb \
+ rk3288-evb-rk808.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
@@ -360,6 +391,7 @@
stih416-b2020e.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
+ sun4i-a10-ba10-tvbox.dtb \
sun4i-a10-cubieboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-hackberry.dtb \
@@ -374,12 +406,16 @@
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
+ sun6i-a31-hummingbird.dtb \
sun6i-a31-m9.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-i12-tvbox.dtb \
- sun7i-a20-olinuxino-micro.dtb
+ sun7i-a20-olinuxino-micro.dtb \
+ sun7i-a20-pcduino3.dtb
+dtb-$(CONFIG_MACH_SUN8I) += \
+ sun8i-a23-ippo-q8h-v5.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-iris-512.dtb \
tegra20-medcom-wide.dtb \
@@ -390,6 +426,7 @@
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
+ tegra30-apalis-eval.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
@@ -437,11 +474,13 @@
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-gp.dtb \
- armada-xp-netgear-rn2120.dtb \
+ armada-xp-lenovo-ix4-300d.dtb \
armada-xp-matrix.dtb \
+ armada-xp-netgear-rn2120.dtb \
armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
+ dove-cubox-es.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
dove-dove-db.dtb
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
index 54cb5cf..d9c50fb 100644
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -16,6 +16,12 @@
bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
};
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+ };
+
ahb {
apb {
usart0: serial@fffb0000 {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 80a3b21..df5fee6 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -149,12 +149,113 @@
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT";
};
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_pins_default>;
+ pinctrl-1 = <&lcd_pins_sleep>;
+ status = "okay";
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ 480x272 {
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <43>;
+ hfront-porch = <8>;
+ hsync-len = <4>;
+ vback-porch = <12>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ clock-frequency = <9000000>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
};
&am33xx_pinmux {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+ lcd_pins_default: lcd_pins_default {
+ pinctrl-single,pins = <
+ 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ >;
+ };
+
+ lcd_pins_sleep: lcd_pins_sleep {
+ pinctrl-single,pins = <
+ 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */
+ 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */
+ 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */
+ 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */
+ 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */
+ 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */
+ 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */
+ 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */
+ 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
+ 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
+ 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
+ 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
+ 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
+ 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
+ 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
+ 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
+ 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
+ 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
+ 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
+ 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
+ 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
+ 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
+ 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
+ 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
+ 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */
+ 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */
+ 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */
+ 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ >;
+ };
+
+
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
@@ -573,3 +674,7 @@
ti,wire-config = <0x00 0x11 0x22 0x33>;
};
};
+
+&lcdc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
new file mode 100644
index 0000000..0d35ab6
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -0,0 +1,653 @@
+/*
+ * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "am33xx.dtsi"
+
+/ {
+ model = "Gumstix Pepper";
+ compatible = "gumstix,am335x-pepper", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&dcdc3_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ buttons: user_buttons {
+ compatible = "gpio-keys";
+ };
+
+ leds: user_leds {
+ compatible = "gpio-leds";
+ };
+
+ panel: lcd_panel {
+ compatible = "ti,tilcdc,panel";
+ };
+
+ sound: sound_iface {
+ compatible = "ti,da830-evm-audio";
+ };
+
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ };
+
+ v3v3c_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ };
+
+ vdd5_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ };
+};
+
+/* I2C Busses */
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
+
+ audio_codec: tlv320aic3106@1b {
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ };
+
+ accel: lis331dlh@1d {
+ compatible = "st,lis3lv02d";
+ reg = <0x1d>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+};
+
+&am33xx_pinmux {
+ i2c0_pins: pinmux_i2c0 {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+ i2c1_pins: pinmux_i2c1 {
+ pinctrl-single,pins = <
+ 0x10C (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */
+ 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */
+ >;
+ };
+};
+
+/* Accelerometer */
+&accel {
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_pins>;
+
+ Vdd-supply = <&ldo3_reg>;
+ Vdd_IO-supply = <&ldo3_reg>;
+ st,irq1-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <92>;
+ st,max-limit-x = <14>;
+ st,min-limit-y = <14>;
+ st,max-limit-y = <92>;
+ st,min-limit-z = <92>;
+ st,max-limit-z = <14>;
+};
+
+&am33xx_pinmux {
+ accel_pins: pinmux_accel {
+ pinctrl-single,pins = <
+ 0x98 (PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */
+ >;
+ };
+};
+
+/* Audio */
+&audio_codec {
+ status = "okay";
+
+ gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ AVDD-supply = <&ldo3_reg>;
+ IOVDD-supply = <&ldo3_reg>;
+ DRVDD-supply = <&ldo3_reg>;
+ DVDD-supply = <&dcdc1_reg>;
+};
+
+&sound {
+ ti,model = "AM335x-EVM";
+ ti,audio-codec = <&audio_codec>;
+ ti,mcasp-controller = <&mcasp0>;
+ ti,codec-clock-rate = <12000000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In";
+};
+
+&mcasp0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_pins>;
+
+ op-mode = <0>; /* MCASP_ISS_MODE */
+ tdm-slots = <2>;
+ serial-dir = <
+ 1 2 0 0
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ >;
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+};
+
+&am33xx_pinmux {
+ audio_pins: pinmux_audio {
+ pinctrl-single,pins = <
+ 0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+ 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+ 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+ 0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
+ 0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+ 0x40 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ >;
+ };
+};
+
+/* Display: 24-bit LCD Screen */
+&panel {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 480x272 {
+ clock-frequency = <18400000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vfront-porch = <4>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ lcd_pins: pinmux_lcd {
+ pinctrl-single,pins = <
+ 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */
+ 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */
+ 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */
+ 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */
+ 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */
+ 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */
+ 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */
+ 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ /* Display Enable */
+ 0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ >;
+ };
+};
+
+/* Ethernet */
+&cpsw_emac0 {
+ status = "okay";
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii";
+};
+
+&cpsw_emac1 {
+ status = "okay";
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii";
+};
+
+&davinci_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+};
+
+
+&am33xx_pinmux {
+ ethernet_pins: pinmux_ethernet {
+ pinctrl-single,pins = <
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ 0x118 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ 0x134 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */
+ 0x138 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */
+ 0x13c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ 0x140 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ /* ethernet interrupt */
+ 0x144 (PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */
+ /* ethernet PHY nReset */
+ 0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */
+ >;
+ };
+
+ mdio_pins: pinmux_mdio {
+ pinctrl-single,pins = <
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+};
+
+/* MMC */
+&mmc1 {
+ /* Bootable SD card slot */
+ status = "okay";
+ vmmc-supply = <&ldo3_reg>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc2 {
+ /* eMMC (not populated) on MMC #2 */
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&ldo3_reg>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&edma {
+ /* Map eDMA MMC2 Events from Crossbar */
+ ti,edma-xbar-event-map = /bits/ 16 <1 12
+ 2 13>;
+};
+
+
+&mmc3 {
+ /* Wifi & Bluetooth on MMC #3 */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wireless_pins>;
+ vmmmc-supply = <&v3v3c_reg>;
+ bus-width = <4>;
+ ti,non-removable;
+ dmas = <&edma 12
+ &edma 13>;
+ dma-names = "tx", "rx";
+};
+
+
+&am33xx_pinmux {
+ sd_pins: pinmux_sd_card {
+ pinctrl-single,pins = <
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+ emmc_pins: pinmux_emmc {
+ pinctrl-single,pins = <
+ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ /* EMMC nReset */
+ 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ >;
+ };
+ wireless_pins: pinmux_wireless {
+ pinctrl-single,pins = <
+ 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */
+ 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */
+ /* WLAN nReset */
+ 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ /* WLAN nPower down */
+ 0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ /* 32kHz Clock */
+ 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ >;
+ };
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&v3v3c_reg {
+ regulator-name = "v3v3c_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vbat>;
+};
+
+&vdd5_reg {
+ regulator-name = "vdd5_reg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vbat>;
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+ backlight {
+ isel = <1>; /* ISET1 */
+ fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
+ default-brightness = <80>;
+ };
+
+ regulators {
+ dcdc1_reg: regulator@0 {
+ /* VDD_1V8 system supply */
+ };
+
+ dcdc2_reg: regulator@1 {
+ /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1325000>;
+ regulator-boot-on;
+ };
+
+ dcdc3_reg: regulator@2 {
+ /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ /* VRTC 1.8V always-on supply */
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ /* 3.3V rail */
+ };
+
+ ldo3_reg: regulator@5 {
+ /* VDD_3V3A 3.3V rail */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4_reg: regulator@6 {
+ /* VDD_3V3B 3.3V rail */
+ };
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+};
+
+&am33xx_pinmux {
+ spi0_pins: pinmux_spi0 {
+ pinctrl-single,pins = <
+ 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ 0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ >;
+ };
+};
+
+/* Touch Screen */
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
+
+/* UARTs */
+&uart0 {
+ /* Serial Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+ /* Broken out to J6 header */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+};
+
+&am33xx_pinmux {
+ uart0_pins: pinmux_uart0 {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+ uart1_pins: pinmux_uart1 {
+ pinctrl-single,pins = <
+ 0x178 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ >;
+ };
+};
+
+/* USB */
+&usb {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins>;
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ usb_pins: pinmux_usb {
+ pinctrl-single,pins = <
+ /* USB0 Over-Current (active low) */
+ 0x64 (PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ /* USB1 Over-Current (active low) */
+ 0x68 (PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ >;
+ };
+};
+
+/* User IO */
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_pins>;
+
+ led@0 {
+ label = "pepper:user0:blue";
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "pepper:user1:red";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_buttons_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "home";
+ linux,code = <KEY_HOME>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ };
+
+ button@1 {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ };
+
+ buttons@2 {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ };
+};
+
+&am33xx_pinmux {
+ user_leds_pins: pinmux_user_leds {
+ pinctrl-single,pins = <
+ 0x50 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */
+ 0x54 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ >;
+ };
+
+ user_buttons_pins: pinmux_user_buttons {
+ pinctrl-single,pins = <
+ 0x58 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ 0x5C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */
+ 0x164 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 49fa596..8d3c163 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -30,7 +30,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
@@ -270,7 +270,7 @@
ti,hwmods = "counter_32k";
};
- rtc@44e3e000 {
+ rtc: rtc@44e3e000 {
compatible = "ti,am4372-rtc","ti,da830-rtc";
reg = <0x44e3e000 0x1000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
@@ -279,7 +279,7 @@
status = "disabled";
};
- wdt@44e35000 {
+ wdt: wdt@44e35000 {
compatible = "ti,am4372-wdt","ti,omap3-wdt";
reg = <0x44e35000 0x1000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -871,7 +871,7 @@
#size-cells = <1>;
ranges;
- dispc@4832a400 {
+ dispc: dispc@4832a400 {
compatible = "ti,omap3-dispc";
reg = <0x4832a400 0x400>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 003766c..f0422c2 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -257,16 +257,73 @@
};
&i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ tps65218: tps65218@24 {
+ reg = <0x24>;
+ compatible = "ti,tps65218";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65218-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ compatible = "ti,tps65218-dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ compatible = "ti,tps65218-dcdc3";
+ regulator-name = "vdcdc3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ dcdc5: regulator-dcdc5 {
+ compatible = "ti,tps65218-dcdc5";
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ dcdc6: regulator-dcdc6 {
+ compatible = "ti,tps65218-dcdc6";
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,tps65218-ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
};
&i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
pixcir_ts@5c {
compatible = "pixcir,pixcir_tangoc";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
new file mode 100644
index 0000000..859ff3d
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -0,0 +1,613 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x SK EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TI AM437x SK EVM";
+ compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
+
+ aliases {
+ display0 = &lcd0;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+
+ sound {
+ compatible = "ti,da830-evm-audio";
+ ti,model = "AM437x-SK-EVM";
+ ti,audio-codec = <&tlv320aic3106>;
+ ti,mcasp-controller = <&mcasp1>;
+ ti,codec-clock-rate = <24000000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT";
+ };
+
+ matrix_keypad: matrix_keypad@0 {
+ compatible = "gpio-matrix-keypad";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&matrix_keypad_pins>;
+
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <1500>;
+
+ row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
+ &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
+
+ col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */
+ &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */
+
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_DOWN)
+ MATRIX_KEY(0, 1, KEY_RIGHT)
+ MATRIX_KEY(1, 0, KEY_LEFT)
+ MATRIX_KEY(1, 1, KEY_UP)
+ >;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+
+ led@0 {
+ label = "am437x-sk:red:heartbeat";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "am437x-sk:green:mmc1";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "am437x-sk:blue:cpu0";
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "am437x-sk:blue:usr3";
+ gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
+ default-state = "off";
+ };
+ };
+
+ lcd0: display {
+ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+
+ enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+
+ panel-timing {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <43>;
+ hsync-len = <4>;
+ vback-porch = <12>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+};
+
+&am43xx_pinmux {
+ matrix_keypad_pins: matrix_keypad_pins {
+ pinctrl-single,pins = <
+ 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
+ 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
+ 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
+ 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
+ >;
+ };
+
+ leds_pins: leds_pins {
+ pinctrl-single,pins = <
+ 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
+ 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
+ 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
+ 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
+ >;
+ };
+
+ i2c0_pins: i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ i2c1_pins: i2c1_pins {
+ pinctrl-single,pins = <
+ 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ >;
+ };
+
+ ecap0_pins: backlight_pins {
+ pinctrl-single,pins = <
+ 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+ >;
+ };
+
+ edt_ft5306_ts_pins: edt_ft5306_ts_pins {
+ pinctrl-single,pins = <
+ 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+
+ /* Slave 2 */
+ 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+ /* Slave 2 reset value */
+ 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ dss_pins: dss_pins {
+ pinctrl-single,pins = <
+ 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
+ 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+ 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
+ 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+ >;
+ };
+
+ qspi_pins: qspi_pins {
+ pinctrl-single,pins = <
+ 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ >;
+ };
+
+ mcasp1_pins: mcasp1_pins {
+ pinctrl-single,pins = <
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ >;
+ };
+
+ lcd_pins: lcd_pins {
+ pinctrl-single,pins = <
+ /* GPIO 5_8 to select LCD / HDMI */
+ 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ tps@24 {
+ compatible = "ti,tps65218";
+ reg = <0x24>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65218-dcdc1";
+ /* VDD_CORE limits min of OPP50 and max of OPP100 */
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ compatible = "ti,tps65218-dcdc2";
+ /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ compatible = "ti,tps65218-dcdc3";
+ regulator-name = "vdds_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc4: regulator-dcdc4 {
+ compatible = "ti,tps65218-dcdc4";
+ regulator-name = "v3_3d";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,tps65218-ldo1";
+ regulator-name = "v1_8d";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ };
+
+ at24@50 {
+ compatible = "at24,24c256";
+ pagesize = <64>;
+ reg = <0x50>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ edt-ft5306@38 {
+ status = "okay";
+ compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
+ pinctrl-names = "default";
+ pinctrl-0 = <&edt_ft5306_ts_pins>;
+
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <31 0>;
+
+ wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <272>;
+ };
+
+ tlv320aic3106: tlv320aic3106@1b {
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&dcdc4>;
+ IOVDD-supply = <&dcdc4>;
+ DRVDD-supply = <&dcdc4>;
+ DVDD-supply = <&ldo1>;
+ };
+
+ lis331dlh@18 {
+ compatible = "st,lis331dlh";
+ reg = <0x18>;
+ status = "okay";
+
+ Vdd-supply = <&dcdc4>;
+ Vdd_IO-supply = <&dcdc4>;
+ interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
+ };
+};
+
+&epwmss0 {
+ status = "okay";
+};
+
+&ecap0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+
+ vmmc-supply = <&dcdc4>;
+ bus-width = <4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb2_phy2 {
+ status = "okay";
+};
+
+&usb2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+
+ spi-max-frequency = <48000000>;
+ m25p80@0 {
+ compatible = "mx66l51235l";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first 512KiB
+ * for a valid file to boot(XIP).
+ */
+ partition@0 {
+ label = "QSPI.U_BOOT";
+ reg = <0x00000000 0x000080000>;
+ };
+ partition@1 {
+ label = "QSPI.U_BOOT.backup";
+ reg = <0x00080000 0x00080000>;
+ };
+ partition@2 {
+ label = "QSPI.U-BOOT-SPL_OS";
+ reg = <0x00100000 0x00010000>;
+ };
+ partition@3 {
+ label = "QSPI.U_BOOT_ENV";
+ reg = <0x00110000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.U-BOOT-ENV.backup";
+ reg = <0x00120000 0x00010000>;
+ };
+ partition@5 {
+ label = "QSPI.KERNEL";
+ reg = <0x00130000 0x0800000>;
+ };
+ partition@6 {
+ label = "QSPI.FILESYSTEM";
+ reg = <0x00930000 0x36D0000>;
+ };
+ };
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ dual_emac = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <4>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <5>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&elm {
+ status = "okay";
+};
+
+&mcasp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp1_pins>;
+
+ status = "okay";
+
+ op-mode = <0>;
+ tdm-slots = <2>;
+ serial-dir = <
+ 0 0 1 2
+ >;
+
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pins>;
+
+ port {
+ dpi_out: endpoint@0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 90098f9..f1ee7495 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -327,6 +327,65 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ tps65218: tps65218@24 {
+ reg = <0x24>;
+ compatible = "ti,tps65218";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65218-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ compatible = "ti,tps65218-dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ compatible = "ti,tps65218-dcdc3";
+ regulator-name = "vdcdc3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc5: regulator-dcdc5 {
+ compatible = "ti,tps65218-dcdc5";
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ dcdc6: regulator-dcdc6 {
+ compatible = "ti,tps65218-dcdc6";
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,tps65218-ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
at24@50 {
compatible = "at24,24c256";
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 3c4f6d9..4e0ad3b 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -40,6 +40,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 1e2919d..929ae00 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -123,6 +123,32 @@
cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
+
+ mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+
+ ethernet@f0000 {
+ status = "okay";
+
+ eth0@c4000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ eth1@c5000 {
+ status = "okay";
+ phy = <&phy3>;
+ phy-mode = "gmii";
+ };
+ };
};
pcie-controller {
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index fb92551..c1e49e7 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -25,6 +25,8 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
+ ethernet0 = ð0;
+ ethernet1 = ð1;
};
clocks {
@@ -151,6 +153,38 @@
<0xc100 0x100>;
};
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0xc0054 0x4>;
+ clocks = <&gateclk 19>;
+ };
+
+ /* Network controller */
+ ethernet@f0000 {
+ compatible = "marvell,armada-375-pp2";
+ reg = <0xf0000 0xa000>, /* Packet Processor regs */
+ <0xc0000 0x3060>, /* LMS regs */
+ <0xc4000 0x100>, /* eth0 regs */
+ <0xc5000 0x100>; /* eth1 regs */
+ clocks = <&gateclk 3>, <&gateclk 19>;
+ clock-names = "pp_clk", "gop_clk";
+ status = "disabled";
+
+ eth0: eth0@c4000 {
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <0>;
+ status = "disabled";
+ };
+
+ eth1: eth1@c5000 {
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ port-id = <1>;
+ status = "disabled";
+ };
+ };
+
spi0: spi@10600 {
compatible = "marvell,orion-spi";
reg = <0x10600 0x50>;
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 689fa1a..242d0ec 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -286,6 +286,11 @@
reg = <0x20800 0x10>;
};
+ mpcore-soc-ctrl@20d20 {
+ compatible = "marvell,armada-380-mpcore-soc-ctrl";
+ reg = <0x20d20 0x6c>;
+ };
+
coherency-fabric@21010 {
compatible = "marvell,armada-380-coherency-fabric";
reg = <0x21010 0x1c>;
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
new file mode 100644
index 0000000..469cf71
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -0,0 +1,284 @@
+/*
+ * Device Tree file for Lenovo Iomega ix4-300d
+ *
+ * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "Lenovo Iomega ix4-300d";
+ compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
+ "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = "/soc/internal-regs/serial@12000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x20000000>; /* 512MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /* Quad port sata: Marvell 88SX7042 */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* USB 3.0 xHCI controller: NEC D720200F1 */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ pinctrl {
+ poweroff_pin: poweroff-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ select_button_pin: select-button-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ scroll_button_pin: scroll-button-pin {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ hdd_led_pin: hdd-led-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@74000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ usb@50000 {
+ status = "okay";
+ };
+
+ usb@51000 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ adt7473@2e {
+ compatible = "adi,adt7473";
+ reg = <0x2e>;
+ };
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ };
+
+ nand@d0000 {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0xe0000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0xe0000 0x20000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env2";
+ reg = <0x100000 0x20000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "zImage";
+ reg = <0x120000 0x400000>;
+ };
+
+ partition@520000 {
+ label = "initrd";
+ reg = <0x520000 0x400000>;
+ };
+
+ partition@xE00000 {
+ label = "boot";
+ reg = <0xE00000 0x3F200000>;
+ };
+
+ partition@flash {
+ label = "flash";
+ reg = <0x0 0x40000000>;
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&power_button_pin &reset_button_pin
+ &select_button_pin &scroll_button_pin>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ reset-button {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+
+ select-button {
+ label = "Select Button";
+ linux,code = <BTN_SELECT>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ scroll-button {
+ label = "Scroll Button";
+ linux,code = <KEY_SCROLLDOWN>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi3 {
+ compatible = "spi-gpio";
+ status = "okay";
+ gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
+ cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio_spi: gpio_spi@0 {
+ compatible = "fairchild,74hc595";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ registers-number = <2>;
+ spi-max-frequency = <100000>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&hdd_led_pin>;
+ pinctrl-names = "default";
+
+ hdd-led {
+ label = "ix4-300d:hdd:blue";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ power-led {
+ label = "ix4-300d:power:white";
+ gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
+ /* init blinking while booting */
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+
+ sysfail-led {
+ label = "ix4-300d:sysfail:red";
+ gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ sys-led {
+ label = "ix4-300d:sys:blue";
+ gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ hddfail-led {
+ label = "ix4-300d:hddfail:red";
+ gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ };
+
+ /*
+ * Warning: you need both eth1 & 0 PHY initialized (i.e having
+ * them up does the tweak) for poweroff to shutdown otherwise it
+ * reboots
+ */
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&poweroff_pin>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 1257ff1..2592e1c 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -34,6 +34,7 @@
compatible = "marvell,sheeva-v7";
reg = <0>;
clocks = <&cpuclk 0>;
+ clock-latency = <1000000>;
};
cpu@1 {
@@ -41,6 +42,7 @@
compatible = "marvell,sheeva-v7";
reg = <1>;
clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 3396b25..480e237 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -36,6 +36,7 @@
compatible = "marvell,sheeva-v7";
reg = <0>;
clocks = <&cpuclk 0>;
+ clock-latency = <1000000>;
};
cpu@1 {
@@ -43,6 +44,7 @@
compatible = "marvell,sheeva-v7";
reg = <1>;
clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 6da84bf..2c7b1fe 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -37,6 +37,7 @@
compatible = "marvell,sheeva-v7";
reg = <0>;
clocks = <&cpuclk 0>;
+ clock-latency = <1000000>;
};
cpu@1 {
@@ -44,6 +45,7 @@
compatible = "marvell,sheeva-v7";
reg = <1>;
clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
};
cpu@2 {
@@ -51,6 +53,7 @@
compatible = "marvell,sheeva-v7";
reg = <2>;
clocks = <&cpuclk 2>;
+ clock-latency = <1000000>;
};
cpu@3 {
@@ -58,6 +61,7 @@
compatible = "marvell,sheeva-v7";
reg = <3>;
clocks = <&cpuclk 3>;
+ clock-latency = <1000000>;
};
};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 5902e83..bff9f6c 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -99,7 +99,7 @@
cpuclk: clock-complex@18700 {
#clock-cells = <1>;
compatible = "marvell,armada-xp-cpu-clock";
- reg = <0x18700 0xA0>;
+ reg = <0x18700 0xA0>, <0x1c054 0x10>;
clocks = <&coreclk 1>;
};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index 55ab618..e9ced30 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -42,6 +42,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
index df4b786..b6ea3f4 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -34,6 +34,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index cbe9673..f89598a 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -31,6 +31,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 5576ae8..a9aef53 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -28,6 +28,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 5b8e404..fec1fca 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -21,12 +21,14 @@
reg = <0x20000000 0x10000000>;
};
- slow_xtal {
- clock-frequency = <32768>;
- };
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
- main_xtal {
- clock-frequency = <12000000>;
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index c61b16f..65ccf56 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91RM9200 family SoC";
@@ -51,6 +52,20 @@
reg = <0x20000000 0x04000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -79,6 +94,260 @@
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <3>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0>,
+ <150000000 180000000 2>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <3>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0>,
+ <150000000 180000000 2>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 80000000>;
+ atmel,clk-divisors = <1 2 3 4>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+
+ prog3: prog3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ interrupts = <AT91_PMC_PCKRDY(3)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&usb>;
+ };
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <4>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+
+ pck3: pck3 {
+ #clock-cells = <0>;
+ reg = <11>;
+ clocks = <&prog3>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ pioD_clk: pioD_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <12>;
+ #clock-cells = <0>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc2_clk: ssc2_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ tc3_clk: tc3_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ tc4_clk: tc4_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ tc5_clk: tc5_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+ };
};
st: timer@fffffd00 {
@@ -93,6 +362,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer@fffa4000 {
@@ -101,6 +372,8 @@
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
21 IRQ_TYPE_LEVEL_HIGH 0
22 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
i2c0: i2c@fffb8000 {
@@ -109,6 +382,7 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_twi>;
+ clocks = <&twi0_clk>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -118,6 +392,8 @@
compatible = "atmel,hsmci";
reg = <0xfffb4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -130,6 +406,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -139,6 +417,8 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -148,6 +428,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+ clocks = <&ssc2_clk>;
+ clock-names = "pclk";
status = "disable";
};
@@ -158,6 +440,8 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>;
+ clock-names = "ether_clk";
status = "disabled";
};
@@ -496,6 +780,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff600 {
@@ -506,6 +791,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff800 {
@@ -516,6 +802,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
pioD: gpio@fffffa00 {
@@ -526,6 +813,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
};
};
@@ -535,6 +823,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -546,6 +836,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -557,6 +849,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -568,6 +862,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -579,6 +875,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -586,6 +884,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfffb0000 0x4000>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -597,6 +897,8 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
};
@@ -622,6 +924,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00300000 0x100000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index df6b0aa..43eb779 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -25,6 +25,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index c0e0eae..cb100b0 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9260 family SoC";
@@ -48,6 +49,26 @@
reg = <0x20000000 0x04000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <5000000>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -74,8 +95,260 @@
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91sam9260-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ slow_rc_osc: slow_rc_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-accuracy = <50000000>;
+ };
+
+ clk32k: slck {
+ compatible = "atmel,at91sam9260-clk-slow";
+ #clock-cells = <0>;
+ clocks = <&slow_rc_osc>, <&slow_xtal>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
+ <150000000 240000000 2 1>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 5000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 105000000>;
+ atmel,clk-divisors = <1 2 4 0>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2 4 0>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <11>;
+ #clock-cells = <0>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ uart0_clk: uart0_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ uart1_clk: uart1_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ tc3_clk: tc3_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ tc4_clk: tc4_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ tc5_clk: tc5_clk {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+ };
};
rstc@fffffd00 {
@@ -92,6 +365,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
tcb0: timer@fffa0000 {
@@ -100,6 +374,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
18 IRQ_TYPE_LEVEL_HIGH 0
19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer@fffdc000 {
@@ -108,6 +384,8 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
27 IRQ_TYPE_LEVEL_HIGH 0
28 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
pinctrl@fffff400 {
@@ -443,6 +721,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff600 {
@@ -453,6 +732,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff800 {
@@ -463,6 +743,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
};
@@ -472,6 +753,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -483,6 +766,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -494,6 +779,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -505,6 +792,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -516,6 +805,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -527,6 +818,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -538,6 +831,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -547,6 +842,8 @@
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -554,6 +851,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -563,6 +862,7 @@
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -573,6 +873,8 @@
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -582,6 +884,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -593,6 +897,8 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -604,6 +910,8 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -613,6 +921,8 @@
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&adc_clk>, <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xf>;
atmel,adc-vref = <3300>;
@@ -680,6 +990,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 04927db..a81aab4 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -46,16 +46,18 @@
reg = <0x20000000 0x08000000>;
};
- main_xtal: main_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
+ clocks {
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- slow_xtal: slow_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index aa35a7a..f4a7657 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -20,14 +20,6 @@
reg = <0x20000000 0x4000000>;
};
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <18432000>;
- };
-
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -37,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index fece866..bb23c2d 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9263 family SoC";
@@ -32,6 +33,7 @@
ssc1 = &ssc1;
pwm0 = &pwm0;
};
+
cpus {
#address-cells = <0>;
#size-cells = <0>;
@@ -46,6 +48,20 @@
reg = <0x20000000 0x08000000>;
};
+ clocks {
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -69,6 +85,264 @@
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+ <190000000 240000000 2 1>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 5000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 120000000>;
+ atmel,clk-divisors = <1 2 4 0>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2 4 0>;
+ clocks = <&pllb>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+
+ prog2: prog2 {
+ #clock-cells = <0>;
+ reg = <2>;
+ interrupts = <AT91_PMC_PCKRDY(2)>;
+ };
+
+ prog3: prog3 {
+ #clock-cells = <0>;
+ reg = <3>;
+ interrupts = <AT91_PMC_PCKRDY(3)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ pck2: pck2 {
+ #clock-cells = <0>;
+ reg = <10>;
+ clocks = <&prog2>;
+ };
+
+ pck3: pck3 {
+ #clock-cells = <0>;
+ reg = <11>;
+ clocks = <&prog3>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioCDE_clk: pioCDE_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ mci1_clk: mci1_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ can_clk: can_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ twi0_clk: twi0_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ ac91_clk: ac97_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tcb_clk: tcb_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ pwm_clk: pwm_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ g2de_clk: g2de_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ lcd_clk: lcd_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ dma_clk: dma_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <29>;
+ };
+ };
};
ramc: ramc@ffffe200 {
@@ -81,12 +355,15 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb_clk>;
+ clock-names = "t0_clk";
};
rstc@fffffd00 {
@@ -403,6 +680,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff400 {
@@ -413,6 +691,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff600 {
@@ -423,6 +702,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioCDE_clk>;
};
pioD: gpio@fffff800 {
@@ -433,6 +713,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioCDE_clk>;
};
pioE: gpio@fffffa00 {
@@ -443,6 +724,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioCDE_clk>;
};
};
@@ -452,6 +734,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -463,6 +747,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -474,6 +760,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -485,6 +773,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -494,6 +784,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -503,6 +795,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -512,6 +806,8 @@
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -519,6 +815,8 @@
compatible = "atmel,at91rm9200-udc";
reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -528,6 +826,7 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -537,6 +836,8 @@
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -546,6 +847,8 @@
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci1_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -568,6 +871,8 @@
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -579,6 +884,8 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -587,6 +894,8 @@
reg = <0xfffb8000 0x300>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ clock-names = "pwm_clk";
status = "disabled";
};
};
@@ -622,6 +931,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00a00000 0x100000>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 15009c9..5cf93ee 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <16367660>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <16367660>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index b8e7946..31f7652 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -25,6 +25,30 @@
adc0: adc@fffe0000 {
atmel,adc-startup-time = <40>;
};
+
+ pmc: pmc@fffffc00 {
+ plla: pllack {
+ atmel,clk-input-range = <2000000 32000000>;
+ atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
+ <695000000 750000000 1 0>,
+ <645000000 700000000 2 0>,
+ <595000000 650000000 3 0>,
+ <545000000 600000000 0 1>,
+ <495000000 550000000 1 1>,
+ <445000000 500000000 2 1>,
+ <400000000 450000000 3 1>;
+ };
+
+ pllb: pllbck {
+ atmel,clk-input-range = <2000000 32000000>;
+ atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
+ };
+
+ mck: masterck {
+ atmel,clk-output-range = <0 133000000>;
+ atmel,clk-divisors = <1 2 4 6>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index cb2c010..d291910 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -26,6 +26,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index ace6bf1..932a669 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
/ {
model = "Atmel AT91SAM9G45 family SoC";
@@ -53,6 +54,26 @@
reg = <0x70000000 0x10000000>;
};
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <300000>;
+ };
+ };
+
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -77,11 +98,279 @@
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe400 0x200
0xffffe600 0x200>;
+ clocks = <&ddrck>;
+ clock-names = "ddrck";
};
pmc: pmc@fffffc00 {
- compatible = "atmel,at91rm9200-pmc";
+ compatible = "atmel,at91sam9g45-pmc";
reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ main_osc: main_osc {
+ compatible = "atmel,at91rm9200-clk-main-osc";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&main_xtal>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ clocks = <&main_osc>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <2000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+ 695000000 750000000 1 0
+ 645000000 700000000 2 0
+ 595000000 650000000 3 0
+ 545000000 600000000 0 1
+ 495000000 555000000 1 1
+ 445000000 500000000 2 1
+ 400000000 450000000 3 1>;
+ };
+
+ plladiv: plladivck {
+ compatible = "atmel,at91sam9x5-clk-plldiv";
+ #clock-cells = <0>;
+ clocks = <&plla>;
+ };
+
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+ clocks = <&main>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>;
+ atmel,clk-output-range = <0 133333333>;
+ atmel,clk-divisors = <1 2 4 3>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91sam9x5-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91sam9g45-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddrck: ddrck {
+ #clock-cells = <0>;
+ reg = <2>;
+ clocks = <&mck>;
+ };
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ pioDE_clk: pioDE_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ trng_clk: trng_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ twi0_clk: twi0_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ twi1_clk: twi1_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tcb0_clk: tcb0_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ pwm_clk: pwm_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ dma0_clk: dma0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ uhphs_clk: uhphs_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ lcd_clk: lcd_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+
+ ac97_clk: ac97_clk {
+ #clock-cells = <0>;
+ reg = <24>;
+ };
+
+ macb0_clk: macb0_clk {
+ #clock-cells = <0>;
+ reg = <25>;
+ };
+
+ isi_clk: isi_clk {
+ #clock-cells = <0>;
+ reg = <26>;
+ };
+
+ udphs_clk: udphs_clk {
+ #clock-cells = <0>;
+ reg = <27>;
+ };
+
+ aestdessha_clk: aestdessha_clk {
+ #clock-cells = <0>;
+ reg = <28>;
+ };
+
+ mci1_clk: mci1_clk {
+ #clock-cells = <0>;
+ reg = <29>;
+ };
+
+ vdec_clk: vdec_clk {
+ #clock-cells = <0>;
+ reg = <30>;
+ };
+ };
};
rstc@fffffd00 {
@@ -93,6 +382,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
@@ -105,12 +395,16 @@
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
tcb1: timer@fffd4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
};
dma: dma-controller@ffffec00 {
@@ -118,6 +412,8 @@
reg = <0xffffec00 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
+ clocks = <&dma0_clk>;
+ clock-names = "dma_clk";
};
pinctrl@fffff200 {
@@ -516,6 +812,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
};
pioB: gpio@fffff400 {
@@ -526,6 +823,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
};
pioC: gpio@fffff600 {
@@ -536,6 +834,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
};
pioD: gpio@fffff800 {
@@ -546,6 +845,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioDE_clk>;
};
pioE: gpio@fffffa00 {
@@ -556,6 +856,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&pioDE_clk>;
};
};
@@ -565,6 +866,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -576,6 +879,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -587,6 +892,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -598,6 +905,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -609,6 +918,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
status = "disabled";
};
@@ -618,6 +929,8 @@
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&macb0_clk>, <&macb0_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -629,6 +942,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi0_clk>;
status = "disabled";
};
@@ -640,6 +954,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&twi1_clk>;
status = "disabled";
};
@@ -649,6 +964,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -658,6 +975,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&ssc1_clk>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -667,6 +986,8 @@
compatible = "atmel,at91sam9g45-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&adc_clk>, <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
@@ -706,6 +1027,7 @@
reg = <0xfffb8000 0x300>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
+ clocks = <&pwm_clk>;
status = "disabled";
};
@@ -718,6 +1040,8 @@
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -730,6 +1054,8 @@
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&mci1_clk>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -752,6 +1078,8 @@
interrupts = <14 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -763,6 +1091,8 @@
interrupts = <15 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -773,6 +1103,8 @@
reg = <0x00600000 0x80000
0xfff78000 0x400>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&udphs_clk>, <&utmi>;
+ clock-names = "pclk", "hclk";
status = "disabled";
ep0 {
@@ -835,6 +1167,8 @@
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
+ clocks = <&lcd_clk>, <&lcd_clk>;
+ clock-names = "hclk", "lcdc_clk";
status = "disabled";
};
@@ -861,6 +1195,9 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ //TODO
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -868,6 +1205,9 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ //TODO
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 9f5b0a6..96ccc7d 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -31,6 +31,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index b84bac5..2bfac31 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -50,16 +50,18 @@
reg = <0x20000000 0x10000000>;
};
- slow_xtal: slow_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- main_xtal: main_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 64bbe46..83d7237 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -21,14 +21,6 @@
reg = <0x20000000 0x8000000>;
};
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <16000000>;
- };
-
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -38,6 +30,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <16000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <16000000>;
+ };
};
ahb {
@@ -56,6 +56,8 @@
wm8904: codec@1a {
compatible = "wm8904";
reg = <0x1a>;
+ clocks = <&pck0>;
+ clock-names = "mclk";
};
qt1070: keyboard@1b {
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 1da1831..ab56c8b 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -50,19 +50,19 @@
reg = <0x20000000 0x04000000>;
};
- slow_xtal: slow_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- main_xtal: main_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -95,6 +95,7 @@
<0xffffe800 0x200>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
+ atmel,nand-has-dma;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioD 17 GPIO_ACTIVE_HIGH>,
@@ -348,6 +349,15 @@
};
};
+ dma0: dma-controller@ffffe600 {
+ compatible = "atmel,at91sam9rl-dma";
+ reg = <0xffffe600 0x200>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <2>;
+ clocks = <&dma0_clk>;
+ clock-names = "dma_clk";
+ };
+
ramc0: ramc@ffffea00 {
compatible = "atmel,at91sam9260-sdramc";
reg = <0xffffea00 0x200>;
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index d4a010e..9be5b54 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -20,15 +20,6 @@
reg = <0x20000000 0x4000000>;
};
-
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <12000000>;
- };
-
clocks {
#address-cells = <1>;
#size-cells = <1>;
@@ -38,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 2c0d6ea..e1a5c70 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -52,22 +52,24 @@
reg = <0x20000000 0x10000000>;
};
- slow_xtal: slow_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
+ clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- main_xtal: main_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
- adc_op_clk: adc_op_clk{
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <5000000>;
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <5000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 8413e21..229d6c2 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -23,12 +23,14 @@
};
};
- slow_xtal {
- clock-frequency = <32768>;
- };
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
- main_xtal {
- clock-frequency = <12000000>;
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 2477dac..9d7c810 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -22,6 +22,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "marvell,berlin-smp";
cpu@0 {
compatible = "marvell,pj4b";
@@ -78,6 +79,11 @@
clocks = <&chip CLKID_TWD>;
};
+ cpu-ctrl@dd0000 {
+ compatible = "marvell,berlin-cpu-ctrl";
+ reg = <0xdd0000 0x10000>;
+ };
+
apb@e80000 {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 995150f..a357ce0 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -34,6 +34,14 @@
status = "okay";
};
+&i2c0 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 635a16a..400c40f 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -18,6 +18,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "marvell,berlin-smp";
cpu@0 {
compatible = "arm,cortex-a9";
@@ -90,6 +91,8 @@
compatible = "arm,pl310-cache";
reg = <0xac0000 0x1000>;
cache-level = <2>;
+ arm,data-latency = <2 2 2>;
+ arm,tag-latency = <2 2 2>;
};
scu: snoop-control-unit@ad0000 {
@@ -111,6 +114,11 @@
#interrupt-cells = <3>;
};
+ cpu-ctrl@dd0000 {
+ compatible = "marvell,berlin-cpu-ctrl";
+ reg = <0xdd0000 0x10000>;
+ };
+
apb@e80000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -191,6 +199,32 @@
};
};
+ i2c0: i2c@1400 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1400 0x100>;
+ interrupt-parent = <&aic>;
+ interrupts = <4>;
+ clocks = <&chip CLKID_CFG>;
+ pinctrl-0 = <&twsi0_pmux>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ i2c1: i2c@1800 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1800 0x100>;
+ interrupt-parent = <&aic>;
+ interrupts = <5>;
+ clocks = <&chip CLKID_CFG>;
+ pinctrl-0 = <&twsi1_pmux>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
@@ -301,6 +335,16 @@
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
clocks = <&refclk>;
clock-names = "refclk";
+
+ twsi0_pmux: twsi0-pmux {
+ groups = "G6";
+ function = "twsi0";
+ };
+
+ twsi1_pmux: twsi1-pmux {
+ groups = "G7";
+ function = "twsi1";
+ };
};
apb@fc0000 {
@@ -311,6 +355,32 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ i2c2: i2c@7000 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x7000 0x100>;
+ interrupt-parent = <&sic>;
+ interrupts = <6>;
+ clocks = <&refclk>;
+ pinctrl-0 = <&twsi2_pmux>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ i2c3: i2c@8000 {
+ compatible = "snps,designware-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x8000 0x100>;
+ interrupt-parent = <&sic>;
+ interrupts = <7>;
+ clocks = <&refclk>;
+ pinctrl-0 = <&twsi3_pmux>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
uart0: uart@9000 {
compatible = "snps,dw-apb-uart";
reg = <0x9000 0x100>;
@@ -348,6 +418,16 @@
groups = "GSM14";
function = "uart1";
};
+
+ twsi2_pmux: twsi2-pmux {
+ groups = "GSM13";
+ function = "twsi2";
+ };
+
+ twsi3_pmux: twsi3-pmux {
+ groups = "GSM14";
+ function = "twsi3";
+ };
};
sic: interrupt-controller@e000 {
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
new file mode 100644
index 0000000..9c7fb0a
--- /dev/null
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Keyboard dts fragment for devices that use cros-ec-keyboard
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/input/input.h>
+
+&cros_ec {
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb";
+ keypad,num-rows = <8>;
+ keypad,num-columns = <13>;
+ google,needs-ghost-filter;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+ MATRIX_KEY(0x00, 0x02, KEY_F1)
+ MATRIX_KEY(0x00, 0x03, KEY_B)
+ MATRIX_KEY(0x00, 0x04, KEY_F10)
+ MATRIX_KEY(0x00, 0x06, KEY_N)
+ MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+ MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+ MATRIX_KEY(0x01, 0x01, KEY_ESC)
+ MATRIX_KEY(0x01, 0x02, KEY_F4)
+ MATRIX_KEY(0x01, 0x03, KEY_G)
+ MATRIX_KEY(0x01, 0x04, KEY_F7)
+ MATRIX_KEY(0x01, 0x06, KEY_H)
+ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+ MATRIX_KEY(0x01, 0x09, KEY_F9)
+ MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+
+ MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+ MATRIX_KEY(0x02, 0x01, KEY_TAB)
+ MATRIX_KEY(0x02, 0x02, KEY_F3)
+ MATRIX_KEY(0x02, 0x03, KEY_T)
+ MATRIX_KEY(0x02, 0x04, KEY_F6)
+ MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+ MATRIX_KEY(0x02, 0x06, KEY_Y)
+ MATRIX_KEY(0x02, 0x07, KEY_102ND)
+ MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+ MATRIX_KEY(0x02, 0x09, KEY_F8)
+
+ MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+ MATRIX_KEY(0x03, 0x02, KEY_F2)
+ MATRIX_KEY(0x03, 0x03, KEY_5)
+ MATRIX_KEY(0x03, 0x04, KEY_F5)
+ MATRIX_KEY(0x03, 0x06, KEY_6)
+ MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+ MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+
+ MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+ MATRIX_KEY(0x04, 0x01, KEY_A)
+ MATRIX_KEY(0x04, 0x02, KEY_D)
+ MATRIX_KEY(0x04, 0x03, KEY_F)
+ MATRIX_KEY(0x04, 0x04, KEY_S)
+ MATRIX_KEY(0x04, 0x05, KEY_K)
+ MATRIX_KEY(0x04, 0x06, KEY_J)
+ MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+ MATRIX_KEY(0x04, 0x09, KEY_L)
+ MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+ MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+ MATRIX_KEY(0x05, 0x01, KEY_Z)
+ MATRIX_KEY(0x05, 0x02, KEY_C)
+ MATRIX_KEY(0x05, 0x03, KEY_V)
+ MATRIX_KEY(0x05, 0x04, KEY_X)
+ MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+ MATRIX_KEY(0x05, 0x06, KEY_M)
+ MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+ MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+ MATRIX_KEY(0x05, 0x09, KEY_DOT)
+ MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+ MATRIX_KEY(0x06, 0x01, KEY_1)
+ MATRIX_KEY(0x06, 0x02, KEY_3)
+ MATRIX_KEY(0x06, 0x03, KEY_4)
+ MATRIX_KEY(0x06, 0x04, KEY_2)
+ MATRIX_KEY(0x06, 0x05, KEY_8)
+ MATRIX_KEY(0x06, 0x06, KEY_7)
+ MATRIX_KEY(0x06, 0x08, KEY_0)
+ MATRIX_KEY(0x06, 0x09, KEY_9)
+ MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+ MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+ MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+ MATRIX_KEY(0x07, 0x01, KEY_Q)
+ MATRIX_KEY(0x07, 0x02, KEY_E)
+ MATRIX_KEY(0x07, 0x03, KEY_R)
+ MATRIX_KEY(0x07, 0x04, KEY_W)
+ MATRIX_KEY(0x07, 0x05, KEY_I)
+ MATRIX_KEY(0x07, 0x06, KEY_U)
+ MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+ MATRIX_KEY(0x07, 0x08, KEY_P)
+ MATRIX_KEY(0x07, 0x09, KEY_O)
+ MATRIX_KEY(0x07, 0x0b, KEY_UP)
+ MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts
new file mode 100644
index 0000000..e28ef05
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox-es.dts
@@ -0,0 +1,12 @@
+#include "dove-cubox.dts"
+
+/ {
+ model = "SolidRun CuBox (Engineering Sample)";
+ compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
+};
+
+&sdio0 {
+ /* sdio0 card detect is connected to wrong pin on CuBox ES */
+ cd-gpios = <&gpio0 12 1>;
+ pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
+};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 7a70f4ca..aae7efc 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -111,9 +111,6 @@
&sdio0 {
status = "okay";
- /* sdio0 card detect is connected to wrong pin on CuBox */
- cd-gpios = <&gpio0 12 1>;
- pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
};
&spi0 {
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 3b891dd..a5441d5 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -630,6 +630,20 @@
reg = <0xe8400 0x0c>;
ngpios = <8>;
};
+
+ lcd1: lcd-controller@810000 {
+ compatible = "marvell,dove-lcd";
+ reg = <0x810000 0x1000>;
+ interrupts = <46>;
+ status = "disabled";
+ };
+
+ lcd0: lcd-controller@820000 {
+ compatible = "marvell,dove-lcd";
+ reg = <0x820000 0x1000>;
+ interrupts = <47>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 8308954..50f8022 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -496,3 +496,11 @@
};
};
};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8012763..6563b98 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -12,6 +12,9 @@
#include "skeleton.dtsi"
+#define MAX_SOURCES 400
+#define DIRECT_IRQ(irq) (MAX_SOURCES + irq)
+
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -45,6 +48,7 @@
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
+ arm,routable-irqs = <192>;
reg = <0x48211000 0x1000>,
<0x48212000 0x1000>,
<0x48214000 0x2000>,
@@ -79,8 +83,8 @@
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x44000000 0x1000000>,
<0x45000000 0x1000>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
prm: prm@4ae06000 {
compatible = "ti,dra7-prm";
@@ -95,6 +99,75 @@
};
};
+ axi@0 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51000000 0x51000000 0x3000
+ 0x0 0x20000000 0x10000000>;
+ pcie@51000000 {
+ compatible = "ti,dra7-pcie";
+ reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 232 0x4>, <0 233 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 1>,
+ <0 0 0 2 &pcie1_intc 2>,
+ <0 0 0 3 &pcie1_intc 3>,
+ <0 0 0 4 &pcie1_intc 4>;
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ axi@1 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51800000 0x51800000 0x3000
+ 0x0 0x30000000 0x10000000>;
+ status = "disabled";
+ pcie@51000000 {
+ compatible = "ti,dra7-pcie";
+ reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 355 0x4>, <0 356 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ ti,hwmods = "pcie2";
+ phys = <&pcie2_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2_intc 1>,
+ <0 0 0 2 &pcie2_intc 2>,
+ <0 0 0 3 &pcie2_intc 3>,
+ <0 0 0 4 &pcie2_intc 4>;
+ pcie2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
cm_core_aon: cm_core_aon@4a005000 {
compatible = "ti,dra7-cm-core-aon";
reg = <0x4a005000 0x2000>;
@@ -155,10 +228,10 @@
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
@@ -167,7 +240,7 @@
gpio1: gpio@4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
@@ -178,7 +251,7 @@
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
reg = <0x48055000 0x200>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
@@ -189,7 +262,7 @@
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
reg = <0x48057000 0x200>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
@@ -200,7 +273,7 @@
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
reg = <0x48059000 0x200>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
@@ -211,7 +284,7 @@
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
reg = <0x4805b000 0x200>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
@@ -222,7 +295,7 @@
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
reg = <0x4805d000 0x200>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
@@ -233,7 +306,7 @@
gpio7: gpio@48051000 {
compatible = "ti,omap4-gpio";
reg = <0x48051000 0x200>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio7";
gpio-controller;
#gpio-cells = <2>;
@@ -244,7 +317,7 @@
gpio8: gpio@48053000 {
compatible = "ti,omap4-gpio";
reg = <0x48053000 0x200>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio8";
gpio-controller;
#gpio-cells = <2>;
@@ -255,7 +328,7 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
@@ -264,7 +337,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
@@ -273,7 +346,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
@@ -282,7 +355,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
@@ -291,7 +364,7 @@
uart5: serial@48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
@@ -300,7 +373,7 @@
uart6: serial@48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
@@ -309,6 +382,7 @@
uart7: serial@48420000 {
compatible = "ti,omap4-uart";
reg = <0x48420000 0x100>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart7";
clock-frequency = <48000000>;
status = "disabled";
@@ -317,6 +391,7 @@
uart8: serial@48422000 {
compatible = "ti,omap4-uart";
reg = <0x48422000 0x100>;
+ interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart8";
clock-frequency = <48000000>;
status = "disabled";
@@ -325,6 +400,7 @@
uart9: serial@48424000 {
compatible = "ti,omap4-uart";
reg = <0x48424000 0x100>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart9";
clock-frequency = <48000000>;
status = "disabled";
@@ -333,6 +409,7 @@
uart10: serial@4ae2b000 {
compatible = "ti,omap4-uart";
reg = <0x4ae2b000 0x100>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart10";
clock-frequency = <48000000>;
status = "disabled";
@@ -341,7 +418,7 @@
timer1: timer@4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
@@ -349,28 +426,28 @@
timer2: timer@48032000 {
compatible = "ti,omap5430-timer";
reg = <0x48032000 0x80>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer2";
};
timer3: timer@48034000 {
compatible = "ti,omap5430-timer";
reg = <0x48034000 0x80>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer3";
};
timer4: timer@48036000 {
compatible = "ti,omap5430-timer";
reg = <0x48036000 0x80>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer4";
};
timer5: timer@48820000 {
compatible = "ti,omap5430-timer";
reg = <0x48820000 0x80>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
ti,timer-dsp;
};
@@ -378,7 +455,7 @@
timer6: timer@48822000 {
compatible = "ti,omap5430-timer";
reg = <0x48822000 0x80>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
ti,timer-dsp;
ti,timer-pwm;
@@ -387,7 +464,7 @@
timer7: timer@48824000 {
compatible = "ti,omap5430-timer";
reg = <0x48824000 0x80>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
ti,timer-dsp;
};
@@ -395,7 +472,7 @@
timer8: timer@48826000 {
compatible = "ti,omap5430-timer";
reg = <0x48826000 0x80>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
ti,timer-dsp;
ti,timer-pwm;
@@ -404,21 +481,21 @@
timer9: timer@4803e000 {
compatible = "ti,omap5430-timer";
reg = <0x4803e000 0x80>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer9";
};
timer10: timer@48086000 {
compatible = "ti,omap5430-timer";
reg = <0x48086000 0x80>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer10";
};
timer11: timer@48088000 {
compatible = "ti,omap5430-timer";
reg = <0x48088000 0x80>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
@@ -426,6 +503,7 @@
timer13: timer@48828000 {
compatible = "ti,omap5430-timer";
reg = <0x48828000 0x80>;
+ interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer13";
status = "disabled";
};
@@ -433,6 +511,7 @@
timer14: timer@4882a000 {
compatible = "ti,omap5430-timer";
reg = <0x4882a000 0x80>;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer14";
status = "disabled";
};
@@ -440,6 +519,7 @@
timer15: timer@4882c000 {
compatible = "ti,omap5430-timer";
reg = <0x4882c000 0x80>;
+ interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer15";
status = "disabled";
};
@@ -447,6 +527,7 @@
timer16: timer@4882e000 {
compatible = "ti,omap5430-timer";
reg = <0x4882e000 0x80>;
+ interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer16";
status = "disabled";
};
@@ -454,7 +535,7 @@
wdt2: wdt@4ae14000 {
compatible = "ti,omap4-wdt";
reg = <0x4ae14000 0x80>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "wd_timer2";
};
@@ -468,14 +549,14 @@
dmm@4e000000 {
compatible = "ti,omap5-dmm";
reg = <0x4e000000 0x800>;
- interrupts = <0 113 0x4>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dmm";
};
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
@@ -485,7 +566,7 @@
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
reg = <0x48072000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
@@ -495,7 +576,7 @@
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
reg = <0x48060000 0x100>;
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
@@ -505,7 +586,7 @@
i2c4: i2c@4807a000 {
compatible = "ti,omap4-i2c";
reg = <0x4807a000 0x100>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
@@ -515,7 +596,7 @@
i2c5: i2c@4807c000 {
compatible = "ti,omap4-i2c";
reg = <0x4807c000 0x100>;
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c5";
@@ -525,7 +606,7 @@
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
@@ -538,7 +619,7 @@
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma 47>, <&sdma 48>;
@@ -549,7 +630,7 @@
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480ad000 0x400>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma 77>, <&sdma 78>;
@@ -560,7 +641,7 @@
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d1000 0x400>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma 57>, <&sdma 58>;
@@ -703,7 +784,7 @@
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
@@ -724,7 +805,7 @@
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
reg = <0x4809a000 0x200>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
@@ -740,7 +821,7 @@
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
@@ -753,7 +834,7 @@
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
reg = <0x480ba000 0x200>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
@@ -773,6 +854,7 @@
clocks = <&qspi_gfclk_div>;
clock-names = "fck";
num-cs = <4>;
+ interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -803,18 +885,76 @@
clock-names = "sysclk";
#phy-cells = <0>;
};
+
+ pcie1_phy: pciephy@4a094000 {
+ compatible = "ti,phy-pipe3-pcie";
+ reg = <0x4a094000 0x80>, /* phy_rx */
+ <0x4a094400 0x64>; /* phy_tx */
+ reg-names = "phy_rx", "phy_tx";
+ ctrl-module = <&omap_control_pcie1phy>;
+ clocks = <&dpll_pcie_ref_ck>,
+ <&dpll_pcie_ref_m2ldo_ck>,
+ <&optfclk_pciephy1_32khz>,
+ <&optfclk_pciephy1_clk>,
+ <&optfclk_pciephy1_div_clk>,
+ <&optfclk_pciephy_div>;
+ clock-names = "dpll_ref", "dpll_ref_m2",
+ "wkupclk", "refclk",
+ "div-clk", "phy-div";
+ #phy-cells = <0>;
+ id = <1>;
+ ti,hwmods = "pcie1-phy";
+ };
+
+ pcie2_phy: pciephy@4a095000 {
+ compatible = "ti,phy-pipe3-pcie";
+ reg = <0x4a095000 0x80>, /* phy_rx */
+ <0x4a095400 0x64>; /* phy_tx */
+ reg-names = "phy_rx", "phy_tx";
+ ctrl-module = <&omap_control_pcie2phy>;
+ clocks = <&dpll_pcie_ref_ck>,
+ <&dpll_pcie_ref_m2ldo_ck>,
+ <&optfclk_pciephy2_32khz>,
+ <&optfclk_pciephy2_clk>,
+ <&optfclk_pciephy2_div_clk>,
+ <&optfclk_pciephy_div>;
+ clock-names = "dpll_ref", "dpll_ref_m2",
+ "wkupclk", "refclk",
+ "div-clk", "phy-div";
+ #phy-cells = <0>;
+ ti,hwmods = "pcie2-phy";
+ id = <2>;
+ status = "disabled";
+ };
};
sata: sata@4a141100 {
compatible = "snps,dwc-ahci";
reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
phys = <&sata_phy>;
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
};
+ omap_control_pcie1phy: control-phy@0x4a003c40 {
+ compatible = "ti,control-phy-pcie";
+ reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
+ reg-names = "power", "control_sma", "pcie_pcs";
+ clocks = <&sys_clkin1>;
+ clock-names = "sysclk";
+ };
+
+ omap_control_pcie2phy: control-pcie@0x4a003c44 {
+ compatible = "ti,control-phy-pcie";
+ reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
+ reg-names = "power", "control_sma", "pcie_pcs";
+ clocks = <&sys_clkin1>;
+ clock-names = "sysclk";
+ status = "disabled";
+ };
+
omap_control_usb2phy1: control-phy@4a002300 {
compatible = "ti,control-phy-usb2";
reg = <0x4a002300 0x4>;
@@ -885,7 +1025,7 @@
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss1";
reg = <0x48880000 0x10000>;
- interrupts = <0 77 4>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
@@ -893,7 +1033,7 @@
usb1: usb@48890000 {
compatible = "snps,dwc3";
reg = <0x48890000 0x17000>;
- interrupts = <0 76 4>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy1>, <&usb3_phy1>;
phy-names = "usb2-phy", "usb3-phy";
tx-fifo-resize;
@@ -906,7 +1046,7 @@
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss2";
reg = <0x488c0000 0x10000>;
- interrupts = <0 92 4>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
@@ -914,7 +1054,7 @@
usb2: usb@488d0000 {
compatible = "snps,dwc3";
reg = <0x488d0000 0x17000>;
- interrupts = <0 78 4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy2>;
phy-names = "usb2-phy";
tx-fifo-resize;
@@ -928,7 +1068,7 @@
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss3";
reg = <0x48900000 0x10000>;
- /* interrupts = <0 TBD 4>; */
+ interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
@@ -937,7 +1077,7 @@
usb3: usb@48910000 {
compatible = "snps,dwc3";
reg = <0x48910000 0x17000>;
- /* interrupts = <0 93 4>; */
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
@@ -948,7 +1088,7 @@
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss4";
reg = <0x48940000 0x10000>;
- /* interrupts = <0 TBD 4>; */
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
@@ -957,7 +1097,7 @@
usb4: usb@48950000 {
compatible = "snps,dwc3";
reg = <0x48950000 0x17000>;
- /* interrupts = <0 TBD 4>; */
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
@@ -967,7 +1107,7 @@
elm: elm@48078000 {
compatible = "ti,am3352-elm";
reg = <0x48078000 0xfc0>; /* device IO registers */
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "elm";
status = "disabled";
};
@@ -976,7 +1116,7 @@
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
reg = <0x50000000 0x37c>; /* device IO registers */
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
@@ -994,6 +1134,17 @@
clock-names = "fck";
status = "disabled";
};
+
+ crossbar_mpu: crossbar@4a020000 {
+ compatible = "ti,irq-crossbar";
+ reg = <0x4a002a48 0x130>;
+ ti,max-irqs = <160>;
+ ti,max-crossbar-sources = <MAX_SOURCES>;
+ ti,reg-size = <2>;
+ ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
+ ti,irqs-skip = <10 133 139 140>;
+ ti,irqs-safe-map = <0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index dc7a292..2c05b3f 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1154,7 +1154,7 @@
apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
compatible = "ti,mux-clock";
- clocks = <&dpll_pcie_ref_ck>, <&pciesref_acs_clk_ck>;
+ clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
#clock-cells = <0>;
reg = <0x021c 0x4>;
ti,bit-shift = <7>;
@@ -1167,16 +1167,33 @@
reg = <0x021c>, <0x0220>;
};
+ optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 {
+ compatible = "ti,gate-clock";
+ clocks = <&sys_32k_ck>;
+ #clock-cells = <0>;
+ reg = <0x13b0>;
+ ti,bit-shift = <8>;
+ };
+
+ optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 {
+ compatible = "ti,gate-clock";
+ clocks = <&sys_32k_ck>;
+ #clock-cells = <0>;
+ reg = <0x13b8>;
+ ti,bit-shift = <8>;
+ };
+
optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
compatible = "ti,divider-clock";
clocks = <&apll_pcie_ck>;
#clock-cells = <0>;
reg = <0x021c>;
+ ti,dividers = <2>, <1>;
ti,bit-shift = <8>;
ti,max-div = <2>;
};
- optfclk_pciephy_clk: optfclk_pciephy_clk@4a0093b0 {
+ optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 {
compatible = "ti,gate-clock";
clocks = <&apll_pcie_ck>;
#clock-cells = <0>;
@@ -1184,7 +1201,15 @@
ti,bit-shift = <9>;
};
- optfclk_pciephy_div_clk: optfclk_pciephy_div_clk@4a0093b0 {
+ optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 {
+ compatible = "ti,gate-clock";
+ clocks = <&apll_pcie_ck>;
+ #clock-cells = <0>;
+ reg = <0x13b8>;
+ ti,bit-shift = <9>;
+ };
+
+ optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 {
compatible = "ti,gate-clock";
clocks = <&optfclk_pciephy_div>;
#clock-cells = <0>;
@@ -1192,6 +1217,14 @@
ti,bit-shift = <10>;
};
+ optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 {
+ compatible = "ti,gate-clock";
+ clocks = <&optfclk_pciephy_div>;
+ #clock-cells = <0>;
+ reg = <0x13b8>;
+ ti,bit-shift = <10>;
+ };
+
apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 143b6d2..8f941c2 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -20,6 +20,16 @@
reg = <0x20000000 0x08000000>;
};
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
ahb {
apb {
dbgu: serial@fffff200 {
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index 4d82968..f72969e 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -15,6 +15,12 @@
model = "Telit EVK-PRO3 for Telit GE863-PRO3";
compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+ };
+
ahb {
apb {
macb0: ethernet@fffc4000 {
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 3e678fa..77a06df 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -425,6 +425,19 @@
status = "disabled";
};
+ i2s2: i2s@13970000 {
+ compatible = "samsung,s3c6410-i2s";
+ reg = <0x13970000 0x100>;
+ interrupts = <0 126 0>;
+ clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0";
+ dmas = <&pdma0 14>, <&pdma0 13>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&i2s2_bus>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
pwm: pwm@139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 17b22e9..08ea6dc 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -123,6 +123,12 @@
reg = <0x10440000 0x1000>;
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <2 2>, <3 2>;
+ };
+
sys_reg: syscon@10010000 {
compatible = "samsung,exynos4-sysreg", "syscon";
reg = <0x10010000 0x400>;
@@ -322,6 +328,23 @@
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&exynos_usbphy 1>;
+ status = "disabled";
+ };
+ port@1 {
+ reg = <1>;
+ phys = <&exynos_usbphy 2>;
+ status = "disabled";
+ };
+ port@2 {
+ reg = <2>;
+ phys = <&exynos_usbphy 3>;
+ status = "disabled";
+ };
};
ohci@12590000 {
@@ -331,6 +354,13 @@
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&exynos_usbphy 1>;
+ status = "disabled";
+ };
};
i2s1: i2s@13960000 {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index ee3001f..a4f28e8 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -93,12 +93,6 @@
#clock-cells = <1>;
};
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupt-parent = <&combiner>;
- interrupts = <2 2>, <3 2>;
- };
-
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
new file mode 100644
index 0000000..6d6d23c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -0,0 +1,371 @@
+/*
+ * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
+ * device tree source
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/input/input.h>
+#include "exynos4412.dtsi"
+
+/ {
+ firmware@0204F000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0204F000 0x1000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_power_key>;
+
+ power_key {
+ interrupt-parent = <&gpx1>;
+ interrupts = <3 0>;
+ gpios = <&gpx1 3 1>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2s0: i2s@03830000 {
+ pinctrl-0 = <&i2s0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>;
+ clock-names = "iis", "i2s_opclk0";
+ };
+
+ sound: sound {
+ compatible = "samsung,odroidx2-audio";
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&max98090>;
+ };
+
+ mmc@12550000 {
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ vmmc-supply = <&ldo20_reg &buck8_reg>;
+ status = "okay";
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ watchdog@10060000 {
+ status = "okay";
+ };
+
+ rtc@10070000 {
+ status = "okay";
+ };
+
+ g2d@10800000 {
+ status = "okay";
+ };
+
+ camera {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <>;
+
+ fimc_0: fimc@11800000 {
+ status = "okay";
+ };
+
+ fimc_1: fimc@11810000 {
+ status = "okay";
+ };
+
+ fimc_2: fimc@11820000 {
+ status = "okay";
+ };
+
+ fimc_3: fimc@11830000 {
+ status = "okay";
+ };
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&ldo4_reg &ldo21_reg>;
+ cd-gpios = <&gpk2 2 0>;
+ cd-inverted;
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ i2c@13860000 {
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ usb3503: usb3503@08 {
+ compatible = "smsc,usb3503";
+ reg = <0x08>;
+
+ intn-gpios = <&gpx3 0 0>;
+ connect-gpios = <&gpx3 4 0>;
+ reset-gpios = <&gpx3 5 0>;
+ initial-mode = <1>;
+ };
+
+ max77686: pmic@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_M1_2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDDQ_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDDQ_MMC2_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDDQ_MMC1_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MPLL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD10_XPLL_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD18_ABB1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD33_USB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_HSIC_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "LDO20_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "LDO21_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VDDQ_LCD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-microvolt-offset = <50000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDDQ_CKEM1_2_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "BUCK6_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "BUCK7_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "BUCK8_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+ };
+ };
+
+ i2c@13870000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
+ status = "okay";
+ max98090: max98090@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <0 0>;
+ };
+ };
+
+ exynos-usbphy@125B0000 {
+ status = "okay";
+ };
+
+ hsotg@12480000 {
+ status = "okay";
+ vusb_d-supply = <&ldo15_reg>;
+ vusb_a-supply = <&ldo12_reg>;
+ };
+
+ ehci: ehci@12580000 {
+ status = "okay";
+ };
+};
+
+&pinctrl_1 {
+ gpio_power_key: power_key {
+ samsung,pins = "gpx1-3";
+ samsung,pin-pud = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
new file mode 100644
index 0000000..c8a64be
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -0,0 +1,61 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
+ *
+ * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-U3 board which is based
+ * on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412-odroid-common.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-U3 board based on Exynos4412";
+ compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
+
+ memory {
+ reg = <0x40000000 0x7FF00000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "led1:heart";
+ gpios = <&gpc1 0 1>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&usb3503 {
+ clock-names = "refclk";
+ clocks = <&pmu_system_controller 0>;
+ refclk-frequency = <24000000>;
+};
+
+&ehci {
+ port@1 {
+ status = "okay";
+ };
+ port@2 {
+ status = "okay";
+ };
+};
+
+&sound {
+ compatible = "samsung,odroidu3-audio";
+ samsung,model = "Odroid-U3";
+ samsung,audio-routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Headphone Jack", "MICBIAS",
+ "IN1", "Headphone Jack",
+ "Speakers", "SPKL",
+ "Speakers", "SPKR";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 31db28a..cb1cfe7 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -3,8 +3,8 @@
*
* Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
*
- * Device tree source file for Hardkernel's ODROID-X board which is based on
- * Samsung's Exynos4412 SoC.
+ * Device tree source file for Hardkernel's ODROID-X board which is based
+ * on Samsung's Exynos4412 SoC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,14 +12,14 @@
*/
/dts-v1/;
-#include "exynos4412.dtsi"
+#include "exynos4412-odroid-common.dtsi"
/ {
model = "Hardkernel ODROID-X board based on Exynos4412";
compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
memory {
- reg = <0x40000000 0x40000000>;
+ reg = <0x40000000 0x3FF00000>;
};
leds {
@@ -38,23 +38,25 @@
};
};
- mmc@12550000 {
- pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
- pinctrl-names = "default";
- vmmc-supply = <&ldo20_reg &buck8_reg>;
+ serial@13820000 {
status = "okay";
+ };
- num-slots = <1>;
- supports-highspeed;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
+ serial@13830000 {
+ status = "okay";
+ };
- slot@0 {
- reg = <0>;
- bus-width = <8>;
+ gpio_keys {
+ pinctrl-0 = <&gpio_power_key &gpio_home_key>;
+
+ home_key {
+ interrupt-parent = <&gpx2>;
+ interrupts = <2 0>;
+ gpios = <&gpx2 2 0>;
+ linux,code = <KEY_HOME>;
+ label = "home key";
+ debounce-interval = <10>;
+ gpio-key,wakeup;
};
};
@@ -65,242 +67,19 @@
regulator-max-microvolt = <3300000>;
gpio = <&gpa1 1 1>;
enable-active-high;
- regulator-boot-on;
+ regulator-always-on;
};
+};
- rtc@10070000 {
+&ehci {
+ port@1 {
status = "okay";
};
+};
- sdhci@12530000 {
- bus-width = <4>;
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- pinctrl-names = "default";
- vmmc-supply = <&ldo4_reg &ldo21_reg>;
- status = "okay";
- };
-
- serial@13800000 {
- status = "okay";
- };
-
- serial@13810000 {
- status = "okay";
- };
-
- serial@13820000 {
- status = "okay";
- };
-
- serial@13830000 {
- status = "okay";
- };
-
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <0>;
- };
-
- xusbxti {
- compatible = "samsung,clock-xusbxti";
- clock-frequency = <24000000>;
- };
- };
-
- i2c@13860000 {
- pinctrl-0 = <&i2c0_bus>;
- pinctrl-names = "default";
- status = "okay";
-
- max77686: pmic@09 {
- compatible = "maxim,max77686";
- reg = <0x09>;
- #clock-cells = <1>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_M1_2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDDQ_EXT_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDDQ_MMC2_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDDQ_MMC1_3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD10_MPLL_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD10_XPLL_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD18_ABB1_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD33_USB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDDQ_C2C_W_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB0_2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_HSIC_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo20_reg: LDO20 {
- regulator-name = "LDO20_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
-
- ldo21_reg: LDO21 {
- regulator-name = "LDO21_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "VDDQ_LCD_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1100000>;
- regulator-microvolt-offset = <50000>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDDQ_CKEM1_2_1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "BUCK6_1.35V";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "BUCK7_2.0V";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "BUCK8_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
- };
- };
+&pinctrl_1 {
+ gpio_home_key: home_key {
+ samsung,pins = "gpx2-2";
+ samsung,pin-pud = <0>;
};
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
new file mode 100644
index 0000000..96b43f4
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -0,0 +1,32 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X2 board which is based
+ * on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4412-odroidx.dts"
+
+/ {
+ model = "Hardkernel ODROID-X2 board based on Exynos4412";
+ compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
+
+ memory {
+ reg = <0x40000000 0x7FF00000>;
+ };
+};
+
+&sound {
+ samsung,model = "Odroid-X2";
+ samsung,audio-routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "IN1", "Mic Jack",
+ "Mic Jack", "MICBIAS";
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index c42a3e1..d8bc059e 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -26,6 +26,10 @@
samsung,combiner-nr = <20>;
};
+ pmu {
+ interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+ };
+
gic: interrupt-controller@10490000 {
cpu-offset = <0x4000>;
};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index c5a943d..95cdfb9 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -31,12 +31,6 @@
mshc0 = &mshc_0;
};
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupt-parent = <&combiner>;
- interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
- };
-
sysram@02020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x40000>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 079fdf9..c682c88 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -137,7 +137,7 @@
sbs,poll-retry-count = <1>;
};
- ec: embedded-controller {
+ cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
interrupts = <6 0>;
@@ -145,95 +145,6 @@
pinctrl-names = "default";
pinctrl-0 = <&ec_irq>;
wakeup-source;
-
- keyboard-controller {
- compatible = "google,cros-ec-keyb";
- keypad,num-rows = <8>;
- keypad,num-columns = <13>;
- google,needs-ghost-filter;
- linux,keymap = <0x0001007d /* L_META */
- 0x0002003b /* F1 */
- 0x00030030 /* B */
- 0x00040044 /* F10 */
- 0x00060031 /* N */
- 0x0008000d /* = */
- 0x000a0064 /* R_ALT */
-
- 0x01010001 /* ESC */
- 0x0102003e /* F4 */
- 0x01030022 /* G */
- 0x01040041 /* F7 */
- 0x01060023 /* H */
- 0x01080028 /* ' */
- 0x01090043 /* F9 */
- 0x010b000e /* BKSPACE */
-
- 0x0200001d /* L_CTRL */
- 0x0201000f /* TAB */
- 0x0202003d /* F3 */
- 0x02030014 /* T */
- 0x02040040 /* F6 */
- 0x0205001b /* ] */
- 0x02060015 /* Y */
- 0x02070056 /* 102ND */
- 0x0208001a /* [ */
- 0x02090042 /* F8 */
-
- 0x03010029 /* GRAVE */
- 0x0302003c /* F2 */
- 0x03030006 /* 5 */
- 0x0304003f /* F5 */
- 0x03060007 /* 6 */
- 0x0308000c /* - */
- 0x030b002b /* \ */
-
- 0x04000061 /* R_CTRL */
- 0x0401001e /* A */
- 0x04020020 /* D */
- 0x04030021 /* F */
- 0x0404001f /* S */
- 0x04050025 /* K */
- 0x04060024 /* J */
- 0x04080027 /* ; */
- 0x04090026 /* L */
- 0x040a002b /* \ */
- 0x040b001c /* ENTER */
-
- 0x0501002c /* Z */
- 0x0502002e /* C */
- 0x0503002f /* V */
- 0x0504002d /* X */
- 0x05050033 /* , */
- 0x05060032 /* M */
- 0x0507002a /* L_SHIFT */
- 0x05080035 /* / */
- 0x05090034 /* . */
- 0x050B0039 /* SPACE */
-
- 0x06010002 /* 1 */
- 0x06020004 /* 3 */
- 0x06030005 /* 4 */
- 0x06040003 /* 2 */
- 0x06050009 /* 8 */
- 0x06060008 /* 7 */
- 0x0608000b /* 0 */
- 0x0609000a /* 9 */
- 0x060a0038 /* L_ALT */
- 0x060b006c /* DOWN */
- 0x060c006a /* RIGHT */
-
- 0x07010010 /* Q */
- 0x07020012 /* E */
- 0x07030013 /* R */
- 0x07040011 /* W */
- 0x07050017 /* I */
- 0x07060016 /* U */
- 0x07070036 /* R_SHIFT */
- 0x07080019 /* P */
- 0x07090018 /* O */
- 0x070b0067 /* UP */
- 0x070c0069>; /* LEFT */
- };
};
power-regulator {
@@ -351,6 +262,7 @@
sound {
compatible = "google,snow-audio-max98095";
+ samsung,model = "Snow-I2S-MAX98095";
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98095>;
};
@@ -431,3 +343,5 @@
};
};
};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 3839c26..9d0b8cc 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -28,24 +28,28 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
+ clock-frequency = <1600000000>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
+ clock-frequency = <1600000000>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x2>;
+ clock-frequency = <1600000000>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x3>;
+ clock-frequency = <1600000000>;
};
};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 1c5b8f9..228a6b1 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -25,8 +25,18 @@
"google,pit", "google,peach","samsung,exynos5420",
"samsung,exynos5";
- memory {
- reg = <0x20000000 0x80000000>;
+ aliases {
+ /* Assign 20 so we don't get confused w/ builtin ones */
+ i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 1000000 0>;
+ brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+ default-brightness-level = <7>;
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
};
fixed-rate-clocks {
@@ -50,18 +60,14 @@
};
};
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
- brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
- default-brightness-level = <7>;
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
+ memory {
+ reg = <0x20000000 0x80000000>;
};
sound {
compatible = "google,snow-audio-max98090";
+ samsung,model = "Peach-Pit-I2S-MAX98090";
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98090>;
};
@@ -87,66 +93,92 @@
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
};
-};
-&pinctrl_0 {
- max98090_irq: max98090-irq {
- samsung,pins = "gpx0-2";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- tpm_irq: tpm-irq {
- samsung,pins = "gpx1-0";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- power_key_irq: power-key-irq {
- samsung,pins = "gpx1-2";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
-
- dp_hpd_gpio: dp_hpd_gpio {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ vbat: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat-supply";
+ regulator-boot-on;
+ regulator-always-on;
};
};
-&pinctrl_3 {
- usb300_vbus_en: usb300-vbus-en {
- samsung,pins = "gph0-0";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb301_vbus_en: usb301-vbus-en {
- samsung,pins = "gph0-1";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-};
-
-&rtc {
+&dp {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd_gpio>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x06>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx2 6 0>;
+
+ display-timings {
+ native-mode = <&timing1>;
+
+ timing1: timing@1 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
+ };
+ };
};
-&uart_3 {
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ ddc = <&i2c_2>;
+};
+
+&hsi2c_7 {
+ status = "okay";
+
+ max98090: codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupts = <2 0>;
+ interrupt-parent = <&gpx0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max98090_irq>;
+ };
+};
+
+&hsi2c_9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+
+ /* Unused irq; but still need to configure the pins */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpm_irq>;
+ };
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+};
+
+&i2s0 {
status = "okay";
};
@@ -189,46 +221,210 @@
};
};
-&hsi2c_7 {
- status = "okay";
- max98090: codec@10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- interrupts = <2 0>;
- interrupt-parent = <&gpx0>;
- pinctrl-names = "default";
- pinctrl-0 = <&max98090_irq>;
- };
-};
-
-&hsi2c_9 {
- status = "okay";
- clock-frequency = <400000>;
-
- tpm@20 {
- compatible = "infineon,slb9645tt";
- reg = <0x20>;
-
- /* Unused irq; but still need to configure the pins */
- pinctrl-names = "default";
- pinctrl-0 = <&tpm_irq>;
- };
-};
-
-&i2c_2 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-};
-
-&hdmi {
- status = "okay";
- hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+&pinctrl_0 {
pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- ddc = <&i2c_2>;
+ pinctrl-0 = <&mask_tpm_reset>;
+
+ max98090_irq: max98090-irq {
+ samsung,pins = "gpx0-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ /* We need GPX0_6 to be low at sleep time; just keep it low always */
+ mask_tpm_reset: mask-tpm-reset {
+ samsung,pins = "gpx0-6";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ samsung,pin-val = <0>;
+ };
+
+ tpm_irq: tpm-irq {
+ samsung,pins = "gpx1-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd_gpio: dp_hpd_gpio {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_3 {
+ /* Drive SPI lines at x2 for better integrity */
+ spi2-bus {
+ samsung,pin-drv = <2>;
+ };
+
+ /* Drive SPI chip select at x2 for better integrity */
+ ec_spi_cs: ec-spi-cs {
+ samsung,pins = "gpb1-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
+ usb300_vbus_en: usb300-vbus-en {
+ samsung,pins = "gph0-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb301_vbus_en: usb301-vbus-en {
+ samsung,pins = "gph0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi_2 {
+ status = "okay";
+ num-cs = <1>;
+ samsung,spi-src-clk = <0>;
+ cs-gpios = <&gpb1 2 0>;
+
+ cros_ec: cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_spi_cs &ec_irq>;
+ reg = <0>;
+ spi-max-frequency = <3125000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <1>;
+ };
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ google,remote-bus = <0>;
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ sbs,i2c-retry-count = <2>;
+ };
+
+ power-regulator@48 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+
+ /*
+ * Config irq to disable internal pulls
+ * even though we run in polling mode.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65090_irq>;
+
+ vsys1-supply = <&vbat>;
+ vsys2-supply = <&vbat>;
+ vsys3-supply = <&vbat>;
+ infet1-supply = <&vbat>;
+ infet2-supply = <&vbat>;
+ infet3-supply = <&vbat>;
+ infet4-supply = <&vbat>;
+ infet5-supply = <&vbat>;
+ infet6-supply = <&vbat>;
+ infet7-supply = <&vbat>;
+ vsys-l1-supply = <&vbat>;
+ vsys-l2-supply = <&vbat>;
+
+ regulators {
+ tps65090_dcdc1: dcdc1 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc2: dcdc2 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc3: dcdc3 {
+ ti,enable-ext-control;
+ };
+ tps65090_fet1: fet1 {
+ regulator-name = "vcd_led";
+ };
+ tps65090_fet2: fet2 {
+ regulator-name = "video_mid";
+ regulator-always-on;
+ };
+ tps65090_fet3: fet3 {
+ regulator-name = "wwan_r";
+ regulator-always-on;
+ };
+ tps65090_fet4: fet4 {
+ regulator-name = "sdcard";
+ regulator-always-on;
+ };
+ tps65090_fet5: fet5 {
+ regulator-name = "camout";
+ };
+ tps65090_fet6: fet6 {
+ regulator-name = "lcd_vdd";
+ };
+ tps65090_fet7: fet7 {
+ regulator-name = "video_mid_1a";
+ regulator-always-on;
+ };
+ tps65090_ldo1: ldo1 {
+ };
+ tps65090_ldo2: ldo2 {
+ };
+ };
+
+ charger {
+ compatible = "ti,tps65090-charger";
+ };
+ };
+ };
+ };
+};
+
+&uart_3 {
+ status = "okay";
};
&usbdrd_phy0 {
@@ -248,40 +444,4 @@
timeout-sec = <32>;
};
-&i2s0 {
- status = "okay";
-};
-
-&fimd {
- status = "okay";
- samsung,invert-vclk;
-};
-
-&dp {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd_gpio>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x06>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx2 6 0>;
-
- display-timings {
- native-mode = <&timing1>;
-
- timing1: timing@1 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
- };
-};
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 1595722..b69de26 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -265,11 +265,6 @@
clock-names = "oscclk", "pclk0", "clk0";
};
- disp_pd: power-domain@100440C0 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x100440C0 0x20>;
- };
-
msc_pd: power-domain@10044120 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044120 0x20>;
@@ -521,7 +516,6 @@
};
fimd: fimd@14400000 {
- samsung,power-domain = <&disp_pd>;
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index f3af207..f3ee48b 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -23,8 +23,18 @@
"google,pi", "google,peach", "samsung,exynos5800",
"samsung,exynos5";
- memory {
- reg = <0x20000000 0x80000000>;
+ aliases {
+ /* Assign 20 so we don't get confused w/ builtin ones */
+ i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 1000000 0>;
+ brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+ default-brightness-level = <7>;
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
};
fixed-rate-clocks {
@@ -48,13 +58,16 @@
};
};
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
- brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
- default-brightness-level = <7>;
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
+ memory {
+ reg = <0x20000000 0x80000000>;
+ };
+
+ sound {
+ compatible = "google,snow-audio-max98091";
+
+ samsung,model = "Peach-Pi-I2S-MAX98091";
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&max98091>;
};
usb300_vbus_reg: regulator-usb300 {
@@ -78,59 +91,92 @@
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
};
-};
-&pinctrl_0 {
- tpm_irq: tpm-irq {
- samsung,pins = "gpx1-0";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- power_key_irq: power-key-irq {
- samsung,pins = "gpx1-2";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- dp_hpd_gpio: dp_hpd_gpio {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ vbat: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat-supply";
+ regulator-boot-on;
+ regulator-always-on;
};
};
-&pinctrl_3 {
- usb300_vbus_en: usb300-vbus-en {
- samsung,pins = "gph0-0";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb301_vbus_en: usb301-vbus-en {
- samsung,pins = "gph0-1";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-};
-
-&rtc {
+&dp {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd_gpio>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx2 6 0>;
+
+ display-timings {
+ native-mode = <&timing1>;
+
+ timing1: timing@1 {
+ clock-frequency = <150660000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hfront-porch = <60>;
+ hback-porch = <172>;
+ hsync-len = <80>;
+ vback-porch = <25>;
+ vfront-porch = <10>;
+ vsync-len = <10>;
+ };
+ };
};
-&uart_3 {
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ ddc = <&i2c_2>;
+};
+
+&hsi2c_7 {
+ status = "okay";
+
+ max98091: codec@10 {
+ compatible = "maxim,max98091";
+ reg = <0x10>;
+ interrupts = <2 0>;
+ interrupt-parent = <&gpx0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max98091_irq>;
+ };
+};
+
+&hsi2c_9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+
+ /* Unused irq; but still need to configure the pins */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpm_irq>;
+ };
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+};
+
+&i2s0 {
status = "okay";
};
@@ -173,66 +219,210 @@
};
};
-&dp {
- status = "okay";
+
+&pinctrl_0 {
pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd_gpio>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx2 6 0>;
+ pinctrl-0 = <&mask_tpm_reset>;
- display-timings {
- native-mode = <&timing1>;
+ max98091_irq: max98091-irq {
+ samsung,pins = "gpx0-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
- timing1: timing@1 {
- clock-frequency = <150660000>;
- hactive = <1920>;
- vactive = <1080>;
- hfront-porch = <60>;
- hback-porch = <172>;
- hsync-len = <80>;
- vback-porch = <25>;
- vfront-porch = <10>;
- vsync-len = <10>;
+ /* We need GPX0_6 to be low at sleep time; just keep it low always */
+ mask_tpm_reset: mask-tpm-reset {
+ samsung,pins = "gpx0-6";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ samsung,pin-val = <0>;
+ };
+
+ tpm_irq: tpm-irq {
+ samsung,pins = "gpx1-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd_gpio: dp_hpd_gpio {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_3 {
+ /* Drive SPI lines at x2 for better integrity */
+ spi2-bus {
+ samsung,pin-drv = <2>;
+ };
+
+ /* Drive SPI chip select at x2 for better integrity */
+ ec_spi_cs: ec-spi-cs {
+ samsung,pins = "gpb1-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <2>;
+ };
+
+ usb300_vbus_en: usb300-vbus-en {
+ samsung,pins = "gph0-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb301_vbus_en: usb301-vbus-en {
+ samsung,pins = "gph0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi_2 {
+ status = "okay";
+ num-cs = <1>;
+ samsung,spi-src-clk = <0>;
+ cs-gpios = <&gpb1 2 0>;
+
+ cros_ec: cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_spi_cs &ec_irq>;
+ reg = <0>;
+ spi-max-frequency = <3125000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <1>;
+ };
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ google,remote-bus = <0>;
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ sbs,i2c-retry-count = <2>;
+ };
+
+ power-regulator@48 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+
+ /*
+ * Config irq to disable internal pulls
+ * even though we run in polling mode.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65090_irq>;
+
+ vsys1-supply = <&vbat>;
+ vsys2-supply = <&vbat>;
+ vsys3-supply = <&vbat>;
+ infet1-supply = <&vbat>;
+ infet2-supply = <&vbat>;
+ infet3-supply = <&vbat>;
+ infet4-supply = <&vbat>;
+ infet5-supply = <&vbat>;
+ infet6-supply = <&vbat>;
+ infet7-supply = <&vbat>;
+ vsys-l1-supply = <&vbat>;
+ vsys-l2-supply = <&vbat>;
+
+ regulators {
+ tps65090_dcdc1: dcdc1 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc2: dcdc2 {
+ ti,enable-ext-control;
+ };
+ tps65090_dcdc3: dcdc3 {
+ ti,enable-ext-control;
+ };
+ tps65090_fet1: fet1 {
+ regulator-name = "vcd_led";
+ };
+ tps65090_fet2: fet2 {
+ regulator-name = "video_mid";
+ regulator-always-on;
+ };
+ tps65090_fet3: fet3 {
+ regulator-name = "wwan_r";
+ regulator-always-on;
+ };
+ tps65090_fet4: fet4 {
+ regulator-name = "sdcard";
+ regulator-always-on;
+ };
+ tps65090_fet5: fet5 {
+ regulator-name = "camout";
+ };
+ tps65090_fet6: fet6 {
+ regulator-name = "lcd_vdd";
+ };
+ tps65090_fet7: fet7 {
+ regulator-name = "video_mid_1a";
+ regulator-always-on;
+ };
+ tps65090_ldo1: ldo1 {
+ };
+ tps65090_ldo2: ldo2 {
+ };
+ };
+
+ charger {
+ compatible = "ti,tps65090-charger";
+ };
+ };
};
};
};
-&fimd {
+&uart_3 {
status = "okay";
- samsung,invert-vclk;
-};
-
-&hsi2c_9 {
- status = "okay";
- clock-frequency = <400000>;
-
- tpm@20 {
- compatible = "infineon,slb9645tt";
- reg = <0x20>;
- /* Unused irq; but still need to configure the pins */
- pinctrl-names = "default";
- pinctrl-0 = <&tpm_irq>;
- };
-};
-
-&i2c_2 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-};
-
-&hdmi {
- status = "okay";
- hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- ddc = <&i2c_2>;
};
&usbdrd_phy0 {
@@ -251,3 +441,5 @@
&watchdog {
timeout-sec = <32>;
};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
index 230099b..0d0e624 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -19,6 +19,10 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <6000000>;
};
+
+ main_xtal {
+ clock-frequency = <6000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
new file mode 100644
index 0000000..68d0834
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+ compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+ cmo_qvga: display {
+ model = "CMO-QVGA";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xcad08b80>;
+ bus-width = <18>;
+ native-mode = <&qvga_timings>;
+ display-timings {
+ qvga_timings: 320x240 {
+ clock-frequency = <6500000>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <30>;
+ hfront-porch = <38>;
+ vback-porch = <20>;
+ vfront-porch = <3>;
+ hsync-len = <15>;
+ vsync-len = <4>;
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_lcd_3v3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
+
+&iomuxc {
+ imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
+ pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+ fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
+ };
+ };
+};
+
+&lcdc {
+ display = <&cmo_qvga>;
+ fsl,lpccr = <0x00a903ff>;
+ lcd-supply = <®_lcd_3v3>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
new file mode 100644
index 0000000..8eee2f6
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
+ compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+ dvi_svga: display {
+ model = "DVI-SVGA";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xfa208b80>;
+ bus-width = <18>;
+ native-mode = <&dvi_svga_timings>;
+ display-timings {
+ dvi_svga_timings: 800x600 {
+ clock-frequency = <40000000>;
+ hactive = <800>;
+ vactive = <600>;
+ hback-porch = <75>;
+ hfront-porch = <75>;
+ vback-porch = <7>;
+ vfront-porch = <75>;
+ hsync-len = <7>;
+ vsync-len = <7>;
+ };
+ };
+ };
+};
+
+&lcdc {
+ display = <&dvi_svga>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
new file mode 100644
index 0000000..447da62
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
+ compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+ dvi_vga: display {
+ model = "DVI-VGA";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xfa208b80>;
+ bus-width = <18>;
+ native-mode = <&dvi_vga_timings>;
+ display-timings {
+ dvi_vga_timings: 640x480 {
+ clock-frequency = <31250000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <100>;
+ hfront-porch = <100>;
+ vback-porch = <7>;
+ vfront-porch = <100>;
+ hsync-len = <7>;
+ vsync-len = <7>;
+ };
+ };
+ };
+};
+
+&lcdc {
+ display = <&dvi_vga>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index ad12da3..ed1d0b4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -155,7 +155,6 @@
&ssi1 {
codec-handle = <&tlv320aic23>;
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index c608942..9c21b15 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -233,7 +233,6 @@
&ssi1 {
codec-handle = <&codec>;
- fsl,mode = "i2s-slave";
status = "okay";
};
@@ -249,3 +248,10 @@
dr_mode = "host";
status = "okay";
};
+
+&usbotg {
+ phy_type = "utmi";
+ dr_mode = "otg";
+ external-vbus-divider;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index bb74d95..c174039 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -312,7 +312,7 @@
gpt4: timer@53f84000 {
compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
reg = <0x53f84000 0x4000>;
- clocks = <&clks 9>, <&clks 45>;
+ clocks = <&clks 95>, <&clks 47>;
clock-names = "ipg", "per";
interrupts = <1>;
};
@@ -320,7 +320,7 @@
gpt3: timer@53f88000 {
compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
reg = <0x53f88000 0x4000>;
- clocks = <&clks 9>, <&clks 47>;
+ clocks = <&clks 94>, <&clks 47>;
clock-names = "ipg", "per";
interrupts = <29>;
};
@@ -328,7 +328,7 @@
gpt2: timer@53f8c000 {
compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
reg = <0x53f8c000 0x4000>;
- clocks = <&clks 9>, <&clks 47>;
+ clocks = <&clks 93>, <&clks 47>;
clock-names = "ipg", "per";
interrupts = <53>;
};
@@ -336,7 +336,7 @@
gpt1: timer@53f90000 {
compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
reg = <0x53f90000 0x4000>;
- clocks = <&clks 9>, <&clks 47>;
+ clocks = <&clks 92>, <&clks 47>;
clock-names = "ipg", "per";
interrupts = <54>;
};
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
new file mode 100644
index 0000000..e224263
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX27";
+ compatible = "eukrea,cpuimx27", "fsl,imx27";
+
+ memory {
+ reg = <0xa0000000 0x04000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-bus";
+
+ clk14745600: clock@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <14745600>;
+ reg = <0>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&owire {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_owire>;
+ status = "okay";
+};
+
+&sdhci2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc2>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh2>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ dr_mode = "otg";
+ phy_type = "ulpi";
+ disable-over-current;
+ status = "okay";
+};
+
+&weim {
+ status = "okay";
+
+ nor: nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0 0x00000000 0x04000000>;
+ bank-width = <2>;
+ linux,mtd-name = "physmap-flash.0";
+ fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
+ };
+
+ uart8250@3,200000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8250_1>;
+ compatible = "ns8250";
+ clocks = <&clk14745600>;
+ fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+ interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
+ reg = <3 0x200000 0x1000>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ no-loopback-test;
+ };
+
+ uart8250@3,400000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8250_2>;
+ compatible = "ns8250";
+ clocks = <&clk14745600>;
+ fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+ interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
+ reg = <3 0x400000 0x1000>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ no-loopback-test;
+ };
+
+ uart8250@3,800000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8250_3>;
+ compatible = "ns8250";
+ clocks = <&clk14745600>;
+ fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+ interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
+ reg = <3 0x800000 0x1000>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ no-loopback-test;
+ };
+
+ uart8250@3,1000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8250_4>;
+ compatible = "ns8250";
+ clocks = <&clk14745600>;
+ fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+ interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
+ reg = <3 0x1000000 0x1000>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ no-loopback-test;
+ };
+};
+
+&iomuxc {
+ imx27-eukrea-cpuimx27 {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
+
+ pinctrl_owire: owiregrp {
+ fsl,pins = <
+ MX27_PAD_RTCK__OWIRE 0x0
+ >;
+ };
+
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX27_PAD_USBH1_TXDM__UART4_TXD 0x0
+ MX27_PAD_USBH1_RXDP__UART4_RXD 0x0
+ MX27_PAD_USBH1_TXDP__UART4_CTS 0x0
+ MX27_PAD_USBH1_FS__UART4_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart8250_1: uart82501grp {
+ fsl,pins = <
+ MX27_PAD_USB_PWR__GPIO2_23 0x0
+ >;
+ };
+
+ pinctrl_uart8250_2: uart82502grp {
+ fsl,pins = <
+ MX27_PAD_USBH1_SUSP__GPIO2_22 0x0
+ >;
+ };
+
+ pinctrl_uart8250_3: uart82503grp {
+ fsl,pins = <
+ MX27_PAD_USBH1_OE_B__GPIO2_27 0x0
+ >;
+ };
+
+ pinctrl_uart8250_4: uart82504grp {
+ fsl,pins = <
+ MX27_PAD_USBH1_RXDM__GPIO2_30 0x0
+ >;
+ };
+
+ pinctrl_usbh2: usbh2grp {
+ fsl,pins = <
+ MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+ MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+ MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+ MX27_PAD_USBH2_STP__USBH2_STP 0x0
+ MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+ MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+ MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+ MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+ MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+ MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+ MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+ MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+ MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+ MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+ MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+ MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+ MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+ MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+ MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+ MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+ MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+ MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+ MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
new file mode 100644
index 0000000..2ab65fc
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-eukrea-cpuimx27.dtsi"
+
+/ {
+ model = "Eukrea MBIMXSD27";
+ compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
+
+ display0: CMO-QVGA {
+ model = "CMO-QVGA";
+ native-mode = <&timing0>;
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xfad08b80>;
+
+ display-timings {
+ timing0: 320x240 {
+ clock-frequency = <6500000>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <20>;
+ hsync-len = <30>;
+ hfront-porch = <38>;
+ vback-porch = <4>;
+ vsync-len = <3>;
+ vfront-porch = <15>;
+ };
+ };
+ };
+
+ backlight {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioleds>;
+
+ led1 {
+ label = "system::live";
+ gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led2 {
+ label = "system::user";
+ gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-bus";
+
+ reg_lcd: regulator@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdreg>;
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "LCD";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
+
+&cspi1 {
+ pinctrl-0 = <&pinctrl_cspi1>;
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ ads7846 {
+ compatible = "ti,ads7846";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ reg = <0>;
+ interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+ spi-cpol;
+ spi-max-frequency = <1500000>;
+ ti,keep-vref-on;
+ };
+};
+
+&fb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_imxfb>;
+ display = <&display0>;
+ lcd-supply = <®_lcd>;
+ fsl,dmacr = <0x00040060>;
+ fsl,lscr1 = <0x00120300>;
+ fsl,lpccr = <0x00a903ff>;
+ status = "okay";
+};
+
+&i2c1 {
+ codec: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&kpp {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_UP)
+ MATRIX_KEY(0, 1, KEY_DOWN)
+ MATRIX_KEY(1, 0, KEY_RIGHT)
+ MATRIX_KEY(1, 1, KEY_LEFT)
+ >;
+ status = "okay";
+};
+
+&sdhci1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&ssi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssi1>;
+ codec-handle = <&codec>;
+ status = "okay";
+};
+
+&uart1 {
+ fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx27-eukrea-cpuimx27-baseboard {
+ pinctrl_cspi1: cspi1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+ MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+ MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */
+ >;
+ };
+
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX27_PAD_PWMO__GPIO5_5 0x0
+ >;
+ };
+
+ pinctrl_gpioleds: gpioledsgrp {
+ fsl,pins = <
+ MX27_PAD_PC_PWRON__GPIO6_16 0x0
+ MX27_PAD_PC_CD2_B__GPIO6_19 0x0
+ >;
+ };
+
+ pinctrl_imxfb: imxfbgrp {
+ fsl,pins = <
+ MX27_PAD_LD0__LD0 0x0
+ MX27_PAD_LD1__LD1 0x0
+ MX27_PAD_LD2__LD2 0x0
+ MX27_PAD_LD3__LD3 0x0
+ MX27_PAD_LD4__LD4 0x0
+ MX27_PAD_LD5__LD5 0x0
+ MX27_PAD_LD6__LD6 0x0
+ MX27_PAD_LD7__LD7 0x0
+ MX27_PAD_LD8__LD8 0x0
+ MX27_PAD_LD9__LD9 0x0
+ MX27_PAD_LD10__LD10 0x0
+ MX27_PAD_LD11__LD11 0x0
+ MX27_PAD_LD12__LD12 0x0
+ MX27_PAD_LD13__LD13 0x0
+ MX27_PAD_LD14__LD14 0x0
+ MX27_PAD_LD15__LD15 0x0
+ MX27_PAD_LD16__LD16 0x0
+ MX27_PAD_LD17__LD17 0x0
+ MX27_PAD_CONTRAST__CONTRAST 0x0
+ MX27_PAD_OE_ACD__OE_ACD 0x0
+ MX27_PAD_HSYNC__HSYNC 0x0
+ MX27_PAD_VSYNC__VSYNC 0x0
+ >;
+ };
+
+ pinctrl_lcdreg: lcdreggrp {
+ fsl,pins = <
+ MX27_PAD_CLS__GPIO1_25 0x0
+ >;
+ };
+
+ pinctrl_sdhc1: sdhc1grp {
+ fsl,pins = <
+ MX27_PAD_SD1_CLK__SD1_CLK 0x0
+ MX27_PAD_SD1_CMD__SD1_CMD 0x0
+ MX27_PAD_SD1_D0__SD1_D0 0x0
+ MX27_PAD_SD1_D1__SD1_D1 0x0
+ MX27_PAD_SD1_D2__SD1_D2 0x0
+ MX27_PAD_SD1_D3__SD1_D3 0x0
+ >;
+ };
+
+ pinctrl_ssi1: ssi1grp {
+ fsl,pins = <
+ MX27_PAD_SSI4_CLK__SSI4_CLK 0x0
+ MX27_PAD_SSI4_FS__SSI4_FS 0x0
+ MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1
+ MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1
+ >;
+ };
+
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX27_PAD_UART3_TXD__UART3_TXD 0x0
+ MX27_PAD_UART3_RXD__UART3_RXD 0x0
+ MX27_PAD_UART3_CTS__UART3_CTS 0x0
+ MX27_PAD_UART3_RTS__UART3_RTS 0x0
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 4c31771..49450db 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -28,7 +28,7 @@
usbphy0: usbphy@0 {
compatible = "usb-nop-xceiv";
reg = <0>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX27_CLK_DUMMY>;
clock-names = "main_clk";
};
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index fe02bc7..538568b 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -61,7 +61,7 @@
compatible = "usb-nop-xceiv";
reg = <2>;
vcc-supply = <®_5v0>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX27_CLK_DUMMY>;
clock-names = "main_clk";
};
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index 31e9f70..b4e955e 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -51,7 +51,7 @@
compatible = "usb-nop-xceiv";
reg = <0>;
vcc-supply = <&sw3_reg>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX27_CLK_DUMMY>;
clock-names = "main_clk";
};
};
@@ -310,7 +310,6 @@
&ssi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssi1>;
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index a75555c..107d713 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -11,9 +11,11 @@
#include "skeleton.dtsi"
#include "imx27-pinfunc.h"
+
+#include <dt-bindings/clock/imx27-clock.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
@@ -68,7 +70,7 @@
399000 1450000
>;
clock-latency = <62500>;
- clocks = <&clks 18>;
+ clocks = <&clks IMX27_CLK_CPU_DIV>;
voltage-tolerance = <5>;
};
};
@@ -91,7 +93,8 @@
compatible = "fsl,imx27-dma";
reg = <0x10001000 0x1000>;
interrupts = <32>;
- clocks = <&clks 50>, <&clks 70>;
+ clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
+ <&clks IMX27_CLK_DMA_AHB_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <1>;
#dma-channels = <16>;
@@ -101,14 +104,15 @@
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x1000>;
interrupts = <27>;
- clocks = <&clks 74>;
+ clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
};
gpt1: timer@10003000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
- clocks = <&clks 46>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
@@ -116,7 +120,8 @@
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10004000 0x1000>;
interrupts = <25>;
- clocks = <&clks 45>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
@@ -124,7 +129,8 @@
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10005000 0x1000>;
interrupts = <24>;
- clocks = <&clks 44>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
@@ -133,7 +139,8 @@
compatible = "fsl,imx27-pwm";
reg = <0x10006000 0x1000>;
interrupts = <23>;
- clocks = <&clks 34>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
@@ -141,14 +148,14 @@
compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
reg = <0x10008000 0x1000>;
interrupts = <21>;
- clocks = <&clks 37>;
+ clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
status = "disabled";
};
owire: owire@10009000 {
compatible = "fsl,imx27-owire", "fsl,imx21-owire";
reg = <0x10009000 0x1000>;
- clocks = <&clks 35>;
+ clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
status = "disabled";
};
@@ -156,7 +163,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
interrupts = <20>;
- clocks = <&clks 81>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -165,7 +173,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000b000 0x1000>;
interrupts = <19>;
- clocks = <&clks 80>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -174,7 +183,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000c000 0x1000>;
interrupts = <18>;
- clocks = <&clks 79>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -183,7 +193,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000d000 0x1000>;
interrupts = <17>;
- clocks = <&clks 78>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -194,7 +205,8 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000e000 0x1000>;
interrupts = <16>;
- clocks = <&clks 53>, <&clks 60>;
+ clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
+ <&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -205,7 +217,8 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000f000 0x1000>;
interrupts = <15>;
- clocks = <&clks 52>, <&clks 60>;
+ clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
+ <&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -215,7 +228,7 @@
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
reg = <0x10010000 0x1000>;
interrupts = <14>;
- clocks = <&clks 26>;
+ clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
dma-names = "rx0", "tx0", "rx1", "tx1";
fsl,fifo-depth = <8>;
@@ -227,7 +240,7 @@
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
reg = <0x10011000 0x1000>;
interrupts = <13>;
- clocks = <&clks 25>;
+ clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
dma-names = "rx0", "tx0", "rx1", "tx1";
fsl,fifo-depth = <8>;
@@ -240,7 +253,7 @@
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x10012000 0x1000>;
interrupts = <12>;
- clocks = <&clks 40>;
+ clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
status = "disabled";
};
@@ -248,7 +261,8 @@
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x10013000 0x1000>;
interrupts = <11>;
- clocks = <&clks 30>, <&clks 60>;
+ clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
+ <&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
dmas = <&dma 7>;
dma-names = "rx-tx";
@@ -259,7 +273,8 @@
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x10014000 0x1000>;
interrupts = <10>;
- clocks = <&clks 29>, <&clks 60>;
+ clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
+ <&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
dmas = <&dma 6>;
dma-names = "rx-tx";
@@ -276,6 +291,7 @@
gpio1: gpio@10015000 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015000 0x100>;
+ clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
@@ -286,6 +302,7 @@
gpio2: gpio@10015100 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015100 0x100>;
+ clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
@@ -296,6 +313,7 @@
gpio3: gpio@10015200 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015200 0x100>;
+ clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
@@ -306,6 +324,7 @@
gpio4: gpio@10015300 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015300 0x100>;
+ clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
@@ -316,6 +335,7 @@
gpio5: gpio@10015400 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015400 0x100>;
+ clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
@@ -326,6 +346,7 @@
gpio6: gpio@10015500 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015500 0x100>;
+ clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
@@ -337,7 +358,7 @@
audmux: audmux@10016000 {
compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
reg = <0x10016000 0x1000>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX27_CLK_DUMMY>;
clock-names = "audmux";
status = "disabled";
};
@@ -348,7 +369,8 @@
compatible = "fsl,imx27-cspi";
reg = <0x10017000 0x1000>;
interrupts = <6>;
- clocks = <&clks 51>, <&clks 60>;
+ clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
+ <&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -357,7 +379,8 @@
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10019000 0x1000>;
interrupts = <4>;
- clocks = <&clks 43>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
@@ -365,7 +388,8 @@
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x1001a000 0x1000>;
interrupts = <3>;
- clocks = <&clks 42>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
@@ -373,7 +397,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001b000 0x1000>;
interrupts = <49>;
- clocks = <&clks 77>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -382,7 +407,8 @@
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001c000 0x1000>;
interrupts = <48>;
- clocks = <&clks 78>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -393,7 +419,7 @@
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x1001d000 0x1000>;
interrupts = <1>;
- clocks = <&clks 39>;
+ clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
status = "disabled";
};
@@ -401,7 +427,8 @@
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x1001e000 0x1000>;
interrupts = <9>;
- clocks = <&clks 28>, <&clks 60>;
+ clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
+ <&clks IMX27_CLK_PER2_GATE>;
clock-names = "ipg", "per";
dmas = <&dma 36>;
dma-names = "rx-tx";
@@ -412,7 +439,8 @@
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x1001f000 0x1000>;
interrupts = <2>;
- clocks = <&clks 41>, <&clks 61>;
+ clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
+ <&clks IMX27_CLK_PER1_GATE>;
clock-names = "ipg", "per";
};
};
@@ -428,7 +456,9 @@
compatible = "fsl,imx27-fb", "fsl,imx21-fb";
interrupts = <61>;
reg = <0x10021000 0x1000>;
- clocks = <&clks 36>, <&clks 65>, <&clks 59>;
+ clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
+ <&clks IMX27_CLK_LCDC_AHB_GATE>,
+ <&clks IMX27_CLK_PER3_GATE>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -437,7 +467,8 @@
compatible = "fsl,imx27-vpu";
reg = <0x10023000 0x0200>;
interrupts = <53>;
- clocks = <&clks 57>, <&clks 66>;
+ clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
+ <&clks IMX27_CLK_VPU_AHB_GATE>;
clock-names = "per", "ahb";
iram = <&iram>;
};
@@ -446,7 +477,7 @@
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
- clocks = <&clks 75>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
@@ -455,7 +486,7 @@
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
- clocks = <&clks 75>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
@@ -464,7 +495,7 @@
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
- clocks = <&clks 75>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
@@ -473,14 +504,15 @@
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
- clocks = <&clks 62>;
+ clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
};
sahara2: sahara@10025000 {
compatible = "fsl,imx27-sahara";
reg = <0x10025000 0x1000>;
interrupts = <59>;
- clocks = <&clks 32>, <&clks 64>;
+ clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
+ <&clks IMX27_CLK_SAHARA_AHB_GATE>;
clock-names = "ipg", "ahb";
};
@@ -494,14 +526,15 @@
compatible = "fsl,imx27-iim";
reg = <0x10028000 0x1000>;
interrupts = <62>;
- clocks = <&clks 38>;
+ clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
};
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
interrupts = <50>;
- clocks = <&clks 48>, <&clks 67>;
+ clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
+ <&clks IMX27_CLK_FEC_AHB_GATE>;
clock-names = "ipg", "ahb";
status = "disabled";
};
@@ -513,7 +546,7 @@
compatible = "fsl,imx27-nand";
reg = <0xd8000000 0x1000>;
interrupts = <29>;
- clocks = <&clks 54>;
+ clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
status = "disabled";
};
@@ -522,7 +555,7 @@
#size-cells = <1>;
compatible = "fsl,imx27-weim";
reg = <0xd8002000 0x1000>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
ranges = <
0 0 0xc0000000 0x08000000
1 0 0xc8000000 0x08000000
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index ae7c339..b04b6b8 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -53,6 +53,17 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31c3 /*
+ MX28_PAD_PWM3__GPIO_3_28 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
};
ssp0: ssp@80010000 {
@@ -60,6 +71,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
&mmc0_cd_cfg &mmc0_sck_cfg>;
+ vmmc-supply = <®_vddio_sd0>;
bus-width = <4>;
status = "okay";
};
@@ -116,4 +128,14 @@
default-state = "on";
};
};
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pwr_cfa10036>;
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
new file mode 100644
index 0000000..759cc56
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx28.dtsi"
+
+/ {
+ model = "DENX M28";
+ compatible = "denx,m28", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ gpmi-nand@8000c000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+ status = "okay";
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00300000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "environment";
+ reg = <0x00300000 0x00080000>;
+ };
+
+ partition@2 {
+ label = "redundant-environment";
+ reg = <0x00380000 0x00080000>;
+ };
+
+ partition@3 {
+ label = "kernel";
+ reg = <0x00400000 0x00400000>;
+ };
+
+ partition@4 {
+ label = "filesystem";
+ reg = <0x00800000 0x0f800000>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ rtc: rtc@68 {
+ compatible = "stm,m41t62";
+ reg = <0x68>;
+ };
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index f0ad7b9..b3c09ae 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -10,52 +10,14 @@
*/
/dts-v1/;
-#include "imx28.dtsi"
+#include "imx28-m28.dtsi"
/ {
model = "DENX M28EVK";
compatible = "denx,m28evk", "fsl,imx28";
- memory {
- reg = <0x40000000 0x08000000>;
- };
-
apb@80000000 {
apbh@80000000 {
- gpmi-nand@8000c000 {
- #address-cells = <1>;
- #size-cells = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
- status = "okay";
-
- partition@0 {
- label = "bootloader";
- reg = <0x00000000 0x00300000>;
- read-only;
- };
-
- partition@1 {
- label = "environment";
- reg = <0x00300000 0x00080000>;
- };
-
- partition@2 {
- label = "redundant-environment";
- reg = <0x00380000 0x00080000>;
- };
-
- partition@3 {
- label = "kernel";
- reg = <0x00400000 0x00400000>;
- };
-
- partition@4 {
- label = "filesystem";
- reg = <0x00800000 0x0f800000>;
- };
- };
-
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
@@ -175,10 +137,6 @@
};
i2c0: i2c@80058000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
@@ -192,11 +150,6 @@
reg = <0x51>;
pagesize = <32>;
};
-
- rtc: rtc@68 {
- compatible = "stm,m41t62";
- reg = <0x68>;
- };
};
lradc@80050000 {
@@ -284,19 +237,6 @@
};
regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_3p3v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index f04ae91..75b0367 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -133,7 +133,6 @@
&ssi1 {
codec-handle = <&tlv320aic23>;
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 4759abb..442e216 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -193,6 +193,14 @@
#clock-cells = <1>;
};
+ gpt: timer@53f90000 {
+ compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <29>;
+ clocks = <&clks 9>, <&clks 50>;
+ clock-names = "ipg", "per";
+ };
+
gpio3: gpio@53fa4000 {
compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
reg = <0x53fa4000 0x4000>;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 6a201cf..c0e0f60 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -151,8 +151,10 @@
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
@@ -457,8 +459,10 @@
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+ dmas = <&sdma 28 0 0>,
+ <&sdma 29 0 0>;
+ dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 181d77f..56569ce 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -203,6 +203,7 @@
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,mc13xxx-uses-rtc;
regulators {
sw1_reg: sw1 {
@@ -392,7 +393,6 @@
};
&ssi2 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index 31cfb7f..34599c5 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -255,7 +255,6 @@
&ssi2 {
codec-handle = <&tlv320aic23>;
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index bebbf3b..17c05a6 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -218,7 +218,6 @@
<&sdma 25 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
@@ -508,7 +507,6 @@
<&sdma 29 0 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
@@ -564,7 +562,6 @@
<&sdma 47 0 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
new file mode 100644
index 0000000..87a7fc7
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ model = "DENX M53";
+ compatible = "denx,imx53-m53", "fsl,imx53";
+
+ memory {
+ reg = <0x70000000 0x20000000>,
+ <0xb0000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p2v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+
+ reg_backlight: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "lcd-supply";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ stmpe610@41 {
+ compatible = "st,stmpe610";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ id = <0>;
+ blocks = <0x5>;
+ interrupts = <6 0x0>;
+ interrupt-parent = <&gpio7>;
+ irq-trigger = <0x1>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <3>;
+ st,touch-det-delay = <3>;
+ st,settling = <4>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ rtc: rtc@68 {
+ compatible = "stm,m41t62";
+ reg = <0x68>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-m53evk {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+ MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
+ MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
+ MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
+ MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
+ MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
+ MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
+ MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
+ MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
+ MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
+ MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
+ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
+ >;
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index c4956b0..d0e0f57 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -10,17 +10,12 @@
*/
/dts-v1/;
-#include "imx53.dtsi"
+#include "imx53-m53.dtsi"
/ {
model = "DENX M53EVK";
compatible = "denx,imx53-m53evk", "fsl,imx53";
- memory {
- reg = <0x70000000 0x20000000>,
- <0xb0000000 0x20000000>;
- };
-
display1: display@di1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
@@ -81,25 +76,6 @@
#address-cells = <1>;
#size-cells = <0>;
- reg_3p2v: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "3P2V";
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3200000>;
- regulator-always-on;
- };
-
-
- reg_backlight: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "lcd-supply";
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3200000>;
- regulator-always-on;
- };
-
reg_usbh1_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
@@ -174,50 +150,6 @@
};
};
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- clock-frequency = <400000>;
- status = "okay";
-
- stmpe610@41 {
- compatible = "st,stmpe610";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x41>;
- id = <0>;
- blocks = <0x5>;
- interrupts = <6 0x0>;
- interrupt-parent = <&gpio7>;
- irq-trigger = <0x1>;
-
- stmpe_touchscreen {
- compatible = "st,stmpe-ts";
- reg = <0>;
- st,sample-time = <4>;
- st,mod-12b = <1>;
- st,ref-sel = <0>;
- st,adc-freq = <1>;
- st,ave-ctrl = <3>;
- st,touch-det-delay = <3>;
- st,settling = <4>;
- st,fraction-z = <7>;
- st,i-drive = <1>;
- };
- };
-
- eeprom: eeprom@50 {
- compatible = "atmel,24c128";
- reg = <0x50>;
- pagesize = <32>;
- };
-
- rtc: rtc@68 {
- compatible = "stm,m41t62";
- reg = <0x68>;
- };
-};
-
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
@@ -229,11 +161,8 @@
pinctrl-0 = <&pinctrl_hog>;
imx53-m53evk {
- pinctrl_hog: hoggrp {
+ pinctrl_usb: usbgrp {
fsl,pins = <
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
- MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
- MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
MX53_PAD_GPIO_2__GPIO1_2 0x80000000
MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000
>;
@@ -302,13 +231,6 @@
>;
};
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
- MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
- >;
- };
-
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
@@ -353,26 +275,6 @@
>;
};
- pinctrl_nand: nandgrp {
- fsl,pins = <
- MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
- MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
- MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
- MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
- MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
- MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
- MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
- MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
- MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
- MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
- MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
- MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
- MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
- MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
- MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
- >;
- };
-
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
@@ -408,14 +310,6 @@
remote-endpoint = <&display1_in>;
};
-&nfc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand>;
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- status = "okay";
-};
-
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
@@ -427,7 +321,6 @@
};
&ssi2 {
- fsl,mode = "i2s-slave";
status = "okay";
};
@@ -450,6 +343,8 @@
};
&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb>;
vbus-supply = <®_usbh1_vbus>;
phy_type = "utmi";
status = "okay";
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 3e3f17a..2e44d2a 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -225,7 +225,6 @@
};
&ssi2 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index fd8c60d..181ae5e 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -141,7 +141,6 @@
};
&ssi2 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index e348796..704bd72 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -502,7 +502,6 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
codec-handle = <&sgtl5000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
index 7f6711a..c17d3ad 100644
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -154,6 +154,5 @@
};
&ssi2 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 6456a00..64fa27b 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -108,7 +108,7 @@
clocks = <&clks IMX5_CLK_SATA_GATE>,
<&clks IMX5_CLK_SATA_REF>,
<&clks IMX5_CLK_AHB>;
- clock-names = "sata_gate", "sata_ref", "ahb";
+ clock-names = "sata", "sata_ref", "ahb";
status = "disabled";
};
@@ -231,7 +231,6 @@
<&sdma 25 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
@@ -260,6 +259,11 @@
};
};
+ aipstz1: bridge@53f00000 {
+ compatible = "fsl,imx53-aipstz";
+ reg = <0x53f00000 0x60>;
+ };
+
usbphy0: usbphy@0 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
@@ -572,6 +576,11 @@
reg = <0x60000000 0x10000000>;
ranges;
+ aipstz2: bridge@63f00000 {
+ compatible = "fsl,imx53-aipstz";
+ reg = <0x63f00000 0x60>;
+ };
+
iim: iim@63f98000 {
compatible = "fsl,imx53-iim", "fsl,imx27-iim";
reg = <0x63f98000 0x4000>;
@@ -661,7 +670,6 @@
<&sdma 29 0 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
@@ -689,7 +697,6 @@
<&sdma 47 0 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
new file mode 100644
index 0000000..9cd06e5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@@ -0,0 +1,85 @@
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+ model = "aristainetos i.MX6 Dual Lite Board 4";
+ compatible = "fsl,imx6dl";
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ status = "okay";
+ };
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ soc {
+ display0: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp>;
+ status = "okay";
+
+ display-timings {
+ 480x800p60 {
+ native-mode;
+ clock-frequency = <30000000>;
+ hactive = <480>;
+ vactive = <800>;
+ hfront-porch = <59>;
+ hback-porch = <10>;
+ hsync-len = <10>;
+ vback-porch = <15>;
+ vfront-porch = <15>;
+ vsync-len = <15>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+ };
+ };
+};
+
+&ecspi2 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
new file mode 100644
index 0000000..b413e24
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
@@ -0,0 +1,74 @@
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+ model = "aristainetos i.MX6 Dual Lite Board 7";
+ compatible = "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ soc {
+ display0: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp>;
+ status = "okay";
+
+ display-timings {
+ 800x480p60 {
+ native-mode;
+ clock-frequency = <33246000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <88>;
+ hback-porch = <88>;
+ hsync-len = <80>;
+ vback-porch = <10>;
+ vfront-porch = <10>;
+ vsync-len = <25>;
+ vsync-active = <1>;
+ };
+ };
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 3000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/imx6dl-gw51xx.dts
index 4bd055f..b2bd022 100644
--- a/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
@@ -14,6 +14,6 @@
#include "imx6qdl-gw51xx.dtsi"
/ {
- model = "Gateworks Ventana i.MX6 DualLite GW51XX";
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
};
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts
index c913605..a2e0b73 100644
--- a/arch/arm/boot/dts/imx6dl-gw52xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
@@ -14,6 +14,6 @@
#include "imx6qdl-gw52xx.dtsi"
/ {
- model = "Gateworks Ventana i.MX6 DualLite GW52XX";
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
};
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts
index 61818a1..6844b70 100644
--- a/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
@@ -14,6 +14,6 @@
#include "imx6qdl-gw53xx.dtsi"
/ {
- model = "Gateworks Ventana i.MX6 DualLite GW53XX";
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
};
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts
index ab38b67..be91541 100644
--- a/arch/arm/boot/dts/imx6dl-gw54xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
@@ -14,6 +14,6 @@
#include "imx6qdl-gw54xx.dtsi"
/ {
- model = "Gateworks Ventana i.MX6 DualLite GW54XX";
+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
};
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
new file mode 100644
index 0000000..b13845c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+ model = "Rex Basic i.MX6 Dual Lite Board";
+ compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+};
+
+&ecspi3 {
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 909fafc..43cb3fd 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -254,7 +254,6 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
@@ -335,10 +334,10 @@
imx6-riotboard {
pinctrl_audmux: audmuxgrp {
fsl,pins = <
- MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x8000000
- MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x8000000
- MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x8000000
- MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x8000000
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */
>;
};
@@ -376,7 +375,7 @@
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
@@ -389,9 +388,9 @@
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 /* AR8035 pin strapping: MODE#1: pull up */
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 /* AR8035 pin strapping: MODE#3: pull up */
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 /* GPIO16 -> AR8035 25MHz */
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* AR8035 interrupt */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>;
};
@@ -426,8 +425,8 @@
pinctrl_led: ledgrp {
fsl,pins = <
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* user led0 */
- MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* user led1 */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* user led0 */
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* user led1 */
>;
};
@@ -493,8 +492,8 @@
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
- MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
>;
};
@@ -506,8 +505,8 @@
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* SD2 CD */
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* SD2 WP */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2 CD */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* SD2 WP */
>;
};
@@ -519,8 +518,8 @@
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3 CD */
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000 /* SD3 WP */
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* SD3 CD */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* SD3 WP */
>;
};
@@ -532,7 +531,7 @@
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
- MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 /* SD4 RST (eMMC) */
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x17059 /* SD4 RST (eMMC) */
>;
};
};
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
new file mode 100644
index 0000000..913bb9a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
+ compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+ aliases {
+ display = &display;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <®_3v3>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp0_1>;
+ status = "okay";
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ display-timings {
+ native-mode = <&ET070001DM6>;
+
+ ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&can1 {
+ status = "disabled";
+};
+
+&can2 {
+ xceiver-supply = <®_3v3>;
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+ status = "disabled";
+};
+
+®_can_xcvr {
+ status = "disabled";
+};
+
+&touchscreen {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
new file mode 100644
index 0000000..5fe465c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6U-801x Module";
+ compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+ aliases {
+ display = &display;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ power-supply = <®_3v3>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp0_1>;
+ status = "okay";
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ display-timings {
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hsync-len = <96>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vsync-len = <2>;
+ vfront-porch = <12>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0350 {
+ clock-frequency = <6413760>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <34>;
+ hsync-len = <34>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0430 {
+ clock-frequency = <9009000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ vfront-porch = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0500 {
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0700 { /* same as ET0500 */
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETQ570 {
+ clock-frequency = <6596040>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <38>;
+ hsync-len = <30>;
+ hfront-porch = <30>;
+ vback-porch = <16>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
new file mode 100644
index 0000000..c275eec
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -0,0 +1,150 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6U-811x Module";
+ compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+ aliases {
+ display = &lvds0;
+ lvds0 = &lvds0;
+ lvds1 = &lvds1;
+ };
+
+ backlight0: backlight0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <®_lcd0_pwr>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ backlight1: backlight1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 500000 0>;
+ power-supply = <®_lcd1_pwr>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+};
+
+&i2c3 {
+ polytouch2: eeti@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eeti>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 0>;
+ wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ linux,wakeup;
+ };
+};
+
+&iomuxc {
+ imx6dl-tx6u-811x {
+ pinctrl_eeti: eetigrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+ >;
+ };
+ };
+};
+
+&kpp {
+ status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&lvds_timing0>;
+ lvds_timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "disabled";
+
+ display-timings {
+ native-mode = <&lvds_timing1>;
+ lvds_timing1: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
new file mode 100644
index 0000000..f607d4f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+ model = "Wandboard i.MX6 Dual Lite Board";
+ compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
index e672891..bbb6167 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
#include "imx6dl.dtsi"
-#include "imx6qdl-wandboard.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"
/ {
model = "Wandboard i.MX6 Dual Lite Board";
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 0a9c49d..b453e0e 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -35,8 +35,11 @@
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
- clocks = <&clks 104>, <&clks 6>, <&clks 16>,
- <&clks 17>, <&clks 170>;
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
arm-supply = <®_arm>;
@@ -56,7 +59,7 @@
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
- clocks = <&clks 142>;
+ clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
aips1: aips-bus@02000000 {
@@ -87,7 +90,7 @@
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021f8000 0x4000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 116>;
+ clocks = <&clks IMX6DL_CLK_I2C4>;
status = "disabled";
};
};
@@ -104,9 +107,9 @@
};
&ldb {
- clocks = <&clks 33>, <&clks 34>,
- <&clks 39>, <&clks 40>,
- <&clks 135>, <&clks 136>;
+ clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel",
"di0", "di1";
diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts
index bc5f31e..9efd8b0 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6q-cubox-i.dts
@@ -13,4 +13,8 @@
&sata {
status = "okay";
+ fsl,transmit-level-mV = <1104>;
+ fsl,transmit-boost-mdB = <0>;
+ fsl,transmit-atten-16ths = <9>;
+ fsl,no-spread-spectrum;
};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index e030263..8c1cb53 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -95,6 +95,12 @@
};
};
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
&ecspi5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
@@ -118,6 +124,13 @@
status = "okay";
};
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -274,6 +287,13 @@
};
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
@@ -286,6 +306,13 @@
>;
};
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+ >;
+ };
+
pinctrl_ecspi5: ecspi5rp-1 {
fsl,pins = <
MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
@@ -316,6 +343,13 @@
>;
};
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
@@ -323,6 +357,19 @@
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1
+ >;
+ };
+
pinctrl_pfuze: pfuze100grp1 {
fsl,pins = <
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
@@ -385,6 +432,13 @@
};
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 8 0>;
+ status = "okay";
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts
index 0e1406e..8e8bcd8 100644
--- a/arch/arm/boot/dts/imx6q-gw51xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
@@ -14,6 +14,6 @@
#include "imx6qdl-gw51xx.dtsi"
/ {
- model = "Gateworks Ventana i.MX6 Quad GW51XX";
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
};
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts
index 5f71ddb..a12c47e 100644
--- a/arch/arm/boot/dts/imx6q-gw52xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
@@ -14,7 +14,7 @@
#include "imx6qdl-gw52xx.dtsi"
/ {
- model = "Gateworks Ventana i.MX6 Quad GW52XX";
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
};
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts
index 360c316..d76aaa8 100644
--- a/arch/arm/boot/dts/imx6q-gw53xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
@@ -14,7 +14,7 @@
#include "imx6qdl-gw53xx.dtsi"
/ {
- model = "Gateworks Ventana i.MX6 Quad GW53XX";
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
};
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 3689eaa..22e6f8e 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -115,9 +115,9 @@
};
sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ compatible = "fsl,imx6q-ventana-sgtl5000",
"fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
+ model = "sgtl5000-audio";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
@@ -504,7 +504,6 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
index ab518d6..6e8f53e 100644
--- a/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -14,7 +14,7 @@
#include "imx6qdl-gw54xx.dtsi"
/ {
- model = "Gateworks Ventana i.MX6 Quad GW54XX";
+ model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
};
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
new file mode 100644
index 0000000..3c2852b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+ model = "Rex Pro i.MX6 Quad Board";
+ compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&ecspi3 {
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf032b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
new file mode 100644
index 0000000..b18fae1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
+ compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+ aliases {
+ display = &display;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <®_3v3>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp0_1>;
+ status = "okay";
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ display-timings {
+ native-mode = <&ET070001DM6>;
+
+ ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&can1 {
+ status = "disabled";
+};
+
+&can2 {
+ xceiver-supply = <®_3v3>;
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+ status = "disabled";
+};
+
+®_can_xcvr {
+ status = "disabled";
+};
+
+&touchscreen {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
new file mode 100644
index 0000000..b58ec9c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6Q-1010 Module";
+ compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+ aliases {
+ display = &display;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ power-supply = <®_3v3>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp0_1>;
+ status = "okay";
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ display-timings {
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hsync-len = <96>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vsync-len = <2>;
+ vfront-porch = <12>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0350 {
+ clock-frequency = <6413760>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <34>;
+ hsync-len = <34>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0430 {
+ clock-frequency = <9009000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ vfront-porch = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0500 {
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0700 { /* same as ET0500 */
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETQ570 {
+ clock-frequency = <6596040>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <38>;
+ hsync-len = <30>;
+ hfront-porch = <30>;
+ vback-porch = <16>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
new file mode 100644
index 0000000..0bb9a9d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
+ compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+ aliases {
+ display = &display;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <®_3v3>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp0_1>;
+ status = "okay";
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ display-timings {
+ native-mode = <&ET070001DM6>;
+
+ ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&can1 {
+ status = "disabled";
+};
+
+&can2 {
+ xceiver-supply = <®_3v3>;
+};
+
+&ds1339 {
+ status = "disabled";
+};
+
+&gpmi {
+ status = "disabled";
+};
+
+&iomuxc {
+ imx6qdl-tx6 {
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1
+ MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1
+ >;
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+ status = "disabled";
+};
+
+®_can_xcvr {
+ status = "disabled";
+};
+
+&touchscreen {
+ status = "disabled";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <4>;
+ no-1-8-v;
+ fsl,wp-controller;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
new file mode 100644
index 0000000..b96d80a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6Q-1020 Module";
+ compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+ aliases {
+ display = &display;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ power-supply = <®_3v3>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp0_1>;
+ status = "okay";
+
+ port {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ display-timings {
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hsync-len = <96>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vsync-len = <2>;
+ vfront-porch = <12>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0350 {
+ clock-frequency = <6413760>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <34>;
+ hsync-len = <34>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0430 {
+ clock-frequency = <9009000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ vfront-porch = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0500 {
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0700 { /* same as ET0500 */
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETQ570 {
+ clock-frequency = <6596040>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <38>;
+ hsync-len = <30>;
+ hfront-porch = <30>;
+ vback-porch = <16>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&ds1339 {
+ status = "disabled";
+};
+
+&gpmi {
+ status = "disabled";
+};
+
+&iomuxc {
+ imx6qdl-tx6 {
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1
+ MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1
+ >;
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <4>;
+ no-1-8-v;
+ fsl,wp-controller;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
new file mode 100644
index 0000000..88aa1e4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TX6Q-1110 Module";
+ compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+ aliases {
+ display = &lvds0;
+ lvds0 = &lvds0;
+ lvds1 = &lvds1;
+ };
+
+ backlight0: backlight0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <®_lcd0_pwr>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ backlight1: backlight1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 500000 0>;
+ power-supply = <®_lcd1_pwr>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+};
+
+&i2c3 {
+ polytouch1: eeti@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eeti>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 0>;
+ wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ linux,wakeup;
+ };
+};
+
+&iomuxc {
+ imx6q-tx6q-1110 {
+ pinctrl_eeti: eetigrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+ >;
+ };
+ };
+};
+
+&kpp {
+ status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&lvds_timing0>;
+ lvds_timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel@1 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "disabled";
+
+ display-timings {
+ native-mode = <&lvds_timing1>;
+ lvds_timing1: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
index 6c56106..e3bff2a 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -23,6 +23,23 @@
memory {
reg = <0x10000000 0x40000000>;
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_h1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
+ gpio = <&gpio7 12 0>;
+ };
+ };
};
&fec {
@@ -81,6 +98,13 @@
>;
};
+ pinctrl_usbh: usbhgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+ MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
@@ -104,6 +128,14 @@
status = "okay";
};
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh>;
+ vbus-supply = <®_usb_h1_vbus>;
+ clocks = <&clks 201>;
+ status = "okay";
+};
+
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
new file mode 100644
index 0000000..20bf3c2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+ model = "Wandboard i.MX6 Quad Board";
+ compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
index 36be17f..4a8a6ee 100644
--- a/arch/arm/boot/dts/imx6q-wandboard.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
#include "imx6q.dtsi"
-#include "imx6qdl-wandboard.dtsi"
+#include "imx6qdl-wandboard-revc1.dtsi"
/ {
model = "Wandboard i.MX6 Quad Board";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index addd3f8..e9f3646 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -43,8 +43,11 @@
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
- clocks = <&clks 104>, <&clks 6>, <&clks 16>,
- <&clks 17>, <&clks 170>;
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
arm-supply = <®_arm>;
@@ -78,7 +81,7 @@
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x40000>;
- clocks = <&clks 142>;
+ clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
aips-bus@02000000 { /* AIPS1 */
@@ -89,7 +92,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 116>, <&clks 116>;
+ clocks = <&clks IMX6Q_CLK_ECSPI5>,
+ <&clks IMX6Q_CLK_ECSPI5>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -140,7 +144,9 @@
compatible = "fsl,imx6q-ahci";
reg = <0x02200000 0x4000>;
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 154>, <&clks 187>, <&clks 105>;
+ clocks = <&clks IMX6QDL_CLK_SATA>,
+ <&clks IMX6QDL_CLK_SATA_REF_100M>,
+ <&clks IMX6QDL_CLK_AHB>;
clock-names = "sata", "sata_ref", "ahb";
status = "disabled";
};
@@ -152,10 +158,20 @@
reg = <0x02800000 0x400000>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
<0 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 133>, <&clks 134>, <&clks 137>;
+ clocks = <&clks IMX6QDL_CLK_IPU2>,
+ <&clks IMX6QDL_CLK_IPU2_DI0>,
+ <&clks IMX6QDL_CLK_IPU2_DI1>;
clock-names = "bus", "di0", "di1";
resets = <&src 4>;
+ ipu2_csi0: port@0 {
+ reg = <0>;
+ };
+
+ ipu2_csi1: port@1 {
+ reg = <1>;
+ };
+
ipu2_di0: port@2 {
#address-cells = <1>;
#size-cells = <0>;
@@ -230,9 +246,10 @@
};
&ldb {
- clocks = <&clks 33>, <&clks 34>,
- <&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>,
- <&clks 135>, <&clks 136>;
+ clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+ <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+ <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel", "di2_sel", "di3_sel",
"di0", "di1";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
new file mode 100644
index 0000000..e6d9195
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -0,0 +1,418 @@
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usbh1_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbotg_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ tmp103: tmp103@71 {
+ compatible = "ti,tmp103";
+ reg = <0x71>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,m41t00";
+ reg = <0x68>;
+ };
+};
+
+&ecspi4 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 20 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a11";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usbh1_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usbotg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ vmmc-supply = <®_3p3v>;
+ cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vmmc-supply = <®_3p3v>;
+ cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
+
+ imx6qdl-aristainetos {
+ pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
+ fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
+ };
+
+ pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
+ fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+ >;
+ };
+
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+ MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b1
+ MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio: gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+ MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x10
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ipu_disp: ipudisp1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x20000
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 744c8a2..234e7b7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -121,9 +121,9 @@
};
sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ compatible = "fsl,imx6q-ventana-sgtl5000",
"fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
+ model = "sgtl5000-audio";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
@@ -489,7 +489,6 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index adf150c..143f84f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -124,9 +124,9 @@
};
sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ compatible = "fsl,imx6q-ventana-sgtl5000",
"fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
+ model = "sgtl5000-audio";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
@@ -533,7 +533,6 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 698d306..16e7ad3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -114,9 +114,9 @@
};
sound {
- compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ compatible = "fsl,imx6q-ventana-sgtl5000",
"fsl,imx-audio-sgtl5000";
- model = "imx6q-sabrelite-sgtl5000";
+ model = "sgtl5000-audio";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
@@ -555,12 +555,10 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
&ssi2 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 4c4b175..42ff525 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -381,7 +381,6 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index faa3494..2694aa8 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -301,6 +301,7 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ phy-supply = <&vdd_eth_io_reg>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
new file mode 100644
index 0000000..df7bcf8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -0,0 +1,357 @@
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usbh1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ regulator-name = "usbh1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ led0: usr {
+ label = "usr";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6-rex-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6-rex-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&ecspi2 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+};
+
+&ecspi3 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ eeprom@57 {
+ compatible = "at,24c02";
+ reg = <0x57>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-rex {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ /* CS */
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x000b1
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
+ /* CS */
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ /* Phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ /* user led */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x10b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ /* CD */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+ /* WP */
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1f0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ /* CD */
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+ /* WP */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1f0b0
+ >;
+ };
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usbh1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 6df6127..0a36129 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -381,7 +381,6 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 40ea365..ec43dde 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -340,6 +340,7 @@
MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
>;
};
@@ -512,7 +513,6 @@
};
&ssi2 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
new file mode 100644
index 0000000..f02b80b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -0,0 +1,696 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ aliases {
+ can0 = &can2;
+ can1 = &can1;
+ ethernet0 = &fec;
+ lcdif_23bit_pins_a = &pinctrl_disp0_1;
+ lcdif_24bit_pins_a = &pinctrl_disp0_2;
+ pwm0 = &pwm1;
+ pwm1 = &pwm2;
+ reg_can_xcvr = ®_can_xcvr;
+ stk5led = &user_led;
+ usbotg = &usbotg;
+ sdhc0 = &usdhc1;
+ sdhc1 = &usdhc2;
+ };
+
+ memory {
+ reg = <0 0>; /* will be filled by U-Boot */
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mclk: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user_led: user {
+ label = "Heartbeat";
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3v3_etn: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3V3_ETN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_etnphy_power>;
+ gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_2v5: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3v3: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_can_xcvr: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-low;
+ };
+
+ reg_lcd0_pwr: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "LCD0 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd0_pwr>;
+ gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_lcd1_pwr: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "LCD1 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd1_pwr>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_usbh1_vbus: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "usbh1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_vbus>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usbotg_vbus: regulator@7 {
+ compatible = "regulator-fixed";
+ reg = <7>;
+ regulator-name = "usbotg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "sgtl5000-audio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <
+ &gpio2 30 GPIO_ACTIVE_HIGH
+ &gpio3 19 GPIO_ACTIVE_HIGH
+ >;
+ status = "okay";
+
+ spidev0: spi@0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <54000000>;
+ };
+
+ spidev1: spi@1 {
+ compatible = "spidev";
+ reg = <1>;
+ spi-max-frequency = <54000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ phy-supply = <®_3v3_etn>;
+ status = "okay";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ fsl,no-blockmark-swap;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ ds1339: rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ sgtl5000: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_2v5>;
+ VDDIO-supply = <®_3v3>;
+ clocks = <&mclk>;
+ };
+
+ polytouch: edt-ft5x06@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_edt_ft5x06>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 0>;
+ reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ linux,wakeup;
+ };
+
+ touchscreen: tsc2007@48 {
+ compatible = "ti,tsc2007";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc2007>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 0>;
+ gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ ti,x-plate-ohms = <660>;
+ linux,wakeup;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-tx6 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
+ MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */
+ MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */
+ MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */
+ MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */
+ >;
+ };
+
+ pinctrl_disp0_1: disp0grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_disp0_2: disp0grp-2 {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x0b0b0
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x0b0b0
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x0b0b0
+ MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x0b0b0
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x0b0b0 /* SPI CS0 */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b0 /* SPI CS1 */
+ >;
+ };
+
+ pinctrl_edt_ft5x06: edt-ft5x06grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ >;
+ };
+
+ pinctrl_etnphy_power: etnphy-pwrgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1
+ MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1
+ MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1
+ MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1
+ MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1
+ MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1
+ MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1
+ MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1
+ >;
+ };
+
+ pinctrl_lcd0_pwr: lcd0-pwrgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */
+ >;
+ };
+
+ pinctrl_lcd1_pwr: lcd1-pwrgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_tsc2007: tsc2007grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1_rtscts: uart1_rtsctsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1
+ MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2_rtscts: uart2_rtsctsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3_rtscts: uart3_rtsctsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh1_vbus: usbh1-vbusgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059
+ >;
+ };
+
+ pinctrl_usbotg_vbus: usbotg-vbusgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1
+ MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x070b1
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x070b1
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x070b1
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x070b1
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x070b1
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x070b1
+ MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */
+ >;
+ };
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp>;
+ /* sample keymap */
+ /* row/col 0,1 are mapped to KPP row/col 6,7 */
+ linux,keymap = <
+ MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
+ MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
+ MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
+ MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
+ MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
+ MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
+ MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
+ MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
+ MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
+ MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
+ MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
+ >;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ #pwm-cells = <3>;
+ status = "disabled";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ #pwm-cells = <3>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usbh1_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usbotg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ dr_mode = "peripheral";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ no-1-8-v;
+ cd-gpios = <&gpio7 2 0>;
+ fsl,wp-controller;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ no-1-8-v;
+ cd-gpios = <&gpio7 3 0>;
+ fsl,wp-controller;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
new file mode 100644
index 0000000..ef7fa62
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-wandboard {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x0f0b0 /* WL_REF_ON */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x0f0b0 /* WL_RST_N */
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */
+ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 /* BT_ON */
+ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 /* BT_WAKE */
+ MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */
+ >;
+ };
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ non-removable;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
new file mode 100644
index 0000000..8d893a7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx6qdl-wandboard {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
+ MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x0f0b0 /* WIFI_ON (reset, active low) */
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON (unused) */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE, input */
+ MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x0f0b0 /* GPIO5_IO31 (Wifi Power Enable) */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE (unused) */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x80000000 /* BT_ON */
+ MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x80000000 /* BT_WAKE */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 /* BT_HOST_WAKE */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */
+ >;
+ };
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 5c6f10c..5fb0916 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -91,22 +91,8 @@
&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
imx6qdl-wandboard {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
- MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
- MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000 /* WL_REF_ON */
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* WL_RST_N */
- MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
- MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
- MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000
- >;
- };
pinctrl_audmux: audmuxgrp {
fsl,pins = <
@@ -233,7 +219,6 @@
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
@@ -269,13 +254,6 @@
status = "okay";
};
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- non-removable;
- status = "okay";
-};
-
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index ce05991..c701af9 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -10,6 +10,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/clock/imx6qdl-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
@@ -94,7 +95,7 @@
interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
#dma-cells = <1>;
dma-channels = <4>;
- clocks = <&clks 106>;
+ clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
};
gpmi: gpmi-nand@00112000 {
@@ -105,8 +106,11 @@
reg-names = "gpmi-nand", "bch";
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bch";
- clocks = <&clks 152>, <&clks 153>, <&clks 151>,
- <&clks 150>, <&clks 149>;
+ clocks = <&clks IMX6QDL_CLK_GPMI_IO>,
+ <&clks IMX6QDL_CLK_GPMI_APB>,
+ <&clks IMX6QDL_CLK_GPMI_BCH>,
+ <&clks IMX6QDL_CLK_GPMI_BCH_APB>,
+ <&clks IMX6QDL_CLK_PER1_BCH>;
clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
"gpmi_bch_apb", "per1_bch";
dmas = <&dma_apbh 0>;
@@ -118,7 +122,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
- clocks = <&clks 15>;
+ clocks = <&clks IMX6QDL_CLK_TWD>;
};
L2: l2-cache@00a02000 {
@@ -149,7 +153,9 @@
<0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 144>, <&clks 206>, <&clks 189>;
+ clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+ <&clks IMX6QDL_CLK_LVDS1_GATE>,
+ <&clks IMX6QDL_CLK_PCIE_REF_125M>;
clock-names = "pcie", "pcie_bus", "pcie_phy";
status = "disabled";
};
@@ -180,11 +186,11 @@
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
- clocks = <&clks 197>, <&clks 3>,
- <&clks 197>, <&clks 107>,
- <&clks 0>, <&clks 118>,
- <&clks 0>, <&clks 139>,
- <&clks 0>;
+ clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>,
+ <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>,
+ <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
+ <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
+ <&clks IMX6QDL_CLK_DUMMY>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
@@ -199,7 +205,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 112>, <&clks 112>;
+ clocks = <&clks IMX6QDL_CLK_ECSPI1>,
+ <&clks IMX6QDL_CLK_ECSPI1>;
clock-names = "ipg", "per";
dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
dma-names = "rx", "tx";
@@ -212,7 +219,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 113>, <&clks 113>;
+ clocks = <&clks IMX6QDL_CLK_ECSPI2>,
+ <&clks IMX6QDL_CLK_ECSPI2>;
clock-names = "ipg", "per";
dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
dma-names = "rx", "tx";
@@ -225,7 +233,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 114>, <&clks 114>;
+ clocks = <&clks IMX6QDL_CLK_ECSPI3>,
+ <&clks IMX6QDL_CLK_ECSPI3>;
clock-names = "ipg", "per";
dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
dma-names = "rx", "tx";
@@ -238,7 +247,8 @@
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 115>, <&clks 115>;
+ clocks = <&clks IMX6QDL_CLK_ECSPI4>,
+ <&clks IMX6QDL_CLK_ECSPI4>;
clock-names = "ipg", "per";
dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
dma-names = "rx", "tx";
@@ -249,7 +259,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
+ clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+ <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
dma-names = "rx", "tx";
@@ -263,46 +274,40 @@
ssi1: ssi@02028000 {
compatible = "fsl,imx6q-ssi",
- "fsl,imx51-ssi",
- "fsl,imx21-ssi";
+ "fsl,imx51-ssi";
reg = <0x02028000 0x4000>;
interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 178>;
+ clocks = <&clks IMX6QDL_CLK_SSI1_IPG>;
dmas = <&sdma 37 1 0>,
<&sdma 38 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <38 37>;
status = "disabled";
};
ssi2: ssi@0202c000 {
compatible = "fsl,imx6q-ssi",
- "fsl,imx51-ssi",
- "fsl,imx21-ssi";
+ "fsl,imx51-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 179>;
+ clocks = <&clks IMX6QDL_CLK_SSI2_IPG>;
dmas = <&sdma 41 1 0>,
<&sdma 42 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <42 41>;
status = "disabled";
};
ssi3: ssi@02030000 {
compatible = "fsl,imx6q-ssi",
- "fsl,imx51-ssi",
- "fsl,imx21-ssi";
+ "fsl,imx51-ssi";
reg = <0x02030000 0x4000>;
interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 180>;
+ clocks = <&clks IMX6QDL_CLK_SSI3_IPG>;
dmas = <&sdma 45 1 0>,
<&sdma 46 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
- fsl,ssi-dma-events = <46 45>;
status = "disabled";
};
@@ -331,7 +336,8 @@
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 62>, <&clks 145>;
+ clocks = <&clks IMX6QDL_CLK_IPG>,
+ <&clks IMX6QDL_CLK_PWM1>;
clock-names = "ipg", "per";
};
@@ -340,7 +346,8 @@
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 62>, <&clks 146>;
+ clocks = <&clks IMX6QDL_CLK_IPG>,
+ <&clks IMX6QDL_CLK_PWM2>;
clock-names = "ipg", "per";
};
@@ -349,7 +356,8 @@
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 62>, <&clks 147>;
+ clocks = <&clks IMX6QDL_CLK_IPG>,
+ <&clks IMX6QDL_CLK_PWM3>;
clock-names = "ipg", "per";
};
@@ -358,7 +366,8 @@
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 62>, <&clks 148>;
+ clocks = <&clks IMX6QDL_CLK_IPG>,
+ <&clks IMX6QDL_CLK_PWM4>;
clock-names = "ipg", "per";
};
@@ -366,7 +375,8 @@
compatible = "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 108>, <&clks 109>;
+ clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
+ <&clks IMX6QDL_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -375,7 +385,8 @@
compatible = "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 110>, <&clks 111>;
+ clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
+ <&clks IMX6QDL_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -384,7 +395,8 @@
compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 119>, <&clks 120>;
+ clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
+ <&clks IMX6QDL_CLK_GPT_IPG_PER>;
clock-names = "ipg", "per";
};
@@ -466,22 +478,25 @@
};
kpp: kpp@020b8000 {
+ compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
+ status = "disabled";
};
wdog1: wdog@020bc000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX6QDL_CLK_DUMMY>;
};
wdog2: wdog@020c0000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX6QDL_CLK_DUMMY>;
status = "disabled";
};
@@ -599,14 +614,14 @@
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
fsl,tempmon = <&anatop>;
fsl,tempmon-data = <&ocotp>;
- clocks = <&clks 172>;
+ clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 182>;
+ clocks = <&clks IMX6QDL_CLK_USBPHY1>;
fsl,anatop = <&anatop>;
};
@@ -614,7 +629,7 @@
compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 183>;
+ clocks = <&clks IMX6QDL_CLK_USBPHY2>;
fsl,anatop = <&anatop>;
};
@@ -727,7 +742,8 @@
reg = <0x00120000 0x9000>;
interrupts = <0 115 0x04>;
gpr = <&gpr>;
- clocks = <&clks 123>, <&clks 124>;
+ clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+ <&clks IMX6QDL_CLK_HDMI_ISFR>;
clock-names = "iahb", "isfr";
status = "disabled";
@@ -762,7 +778,8 @@
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 155>, <&clks 155>;
+ clocks = <&clks IMX6QDL_CLK_SDMA>,
+ <&clks IMX6QDL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
@@ -790,7 +807,7 @@
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 162>;
+ clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
@@ -800,7 +817,7 @@
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 162>;
+ clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
@@ -810,7 +827,7 @@
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 162>;
+ clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
@@ -819,7 +836,7 @@
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 162>;
+ clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
@@ -828,7 +845,7 @@
#index-cells = <1>;
compatible = "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
- clocks = <&clks 162>;
+ clocks = <&clks IMX6QDL_CLK_USBOH3>;
};
fec: ethernet@02188000 {
@@ -837,7 +854,9 @@
interrupts-extended =
<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 117>, <&clks 117>, <&clks 190>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
@@ -853,7 +872,9 @@
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+ clocks = <&clks IMX6QDL_CLK_USDHC1>,
+ <&clks IMX6QDL_CLK_USDHC1>,
+ <&clks IMX6QDL_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -863,7 +884,9 @@
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+ clocks = <&clks IMX6QDL_CLK_USDHC2>,
+ <&clks IMX6QDL_CLK_USDHC2>,
+ <&clks IMX6QDL_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -873,7 +896,9 @@
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+ clocks = <&clks IMX6QDL_CLK_USDHC3>,
+ <&clks IMX6QDL_CLK_USDHC3>,
+ <&clks IMX6QDL_CLK_USDHC3>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -883,7 +908,9 @@
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+ clocks = <&clks IMX6QDL_CLK_USDHC4>,
+ <&clks IMX6QDL_CLK_USDHC4>,
+ <&clks IMX6QDL_CLK_USDHC4>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -895,7 +922,7 @@
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 125>;
+ clocks = <&clks IMX6QDL_CLK_I2C1>;
status = "disabled";
};
@@ -905,7 +932,7 @@
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 126>;
+ clocks = <&clks IMX6QDL_CLK_I2C2>;
status = "disabled";
};
@@ -915,7 +942,7 @@
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 127>;
+ clocks = <&clks IMX6QDL_CLK_I2C3>;
status = "disabled";
};
@@ -936,7 +963,7 @@
compatible = "fsl,imx6q-weim";
reg = <0x021b8000 0x4000>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 196>;
+ clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
};
ocotp: ocotp@021bc000 {
@@ -996,7 +1023,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
+ clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+ <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
dma-names = "rx", "tx";
@@ -1007,7 +1035,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
+ clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+ <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
dma-names = "rx", "tx";
@@ -1018,7 +1047,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
+ clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+ <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
dma-names = "rx", "tx";
@@ -1029,7 +1059,8 @@
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 160>, <&clks 161>;
+ clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+ <&clks IMX6QDL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
dma-names = "rx", "tx";
@@ -1044,10 +1075,20 @@
reg = <0x02400000 0x400000>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
<0 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks 130>, <&clks 131>, <&clks 132>;
+ clocks = <&clks IMX6QDL_CLK_IPU1>,
+ <&clks IMX6QDL_CLK_IPU1_DI0>,
+ <&clks IMX6QDL_CLK_IPU1_DI1>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
+ ipu1_csi0: port@0 {
+ reg = <0>;
+ };
+
+ ipu1_csi1: port@1 {
+ reg = <1>;
+ };
+
ipu1_di0: port@2 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index a8d9a93..3f9e041 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -116,8 +116,9 @@
};
&fec {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-1 = <&pinctrl_fec_sleep>;
phy-mode = "rmii";
status = "okay";
};
@@ -300,6 +301,19 @@
>;
};
+ pinctrl_fec_sleep: fecgrp-sleep {
+ fsl,pins = <
+ MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080
+ MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080
+ MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080
+ MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080
+ MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080
+ MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080
+ MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080
+ MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
@@ -475,7 +489,6 @@
};
&ssi2 {
- fsl,mode = "i2s-slave";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 57d4abe..c75800c 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -227,8 +227,7 @@
ssi1: ssi@02028000 {
compatible = "fsl,imx6sl-ssi",
- "fsl,imx51-ssi",
- "fsl,imx21-ssi";
+ "fsl,imx51-ssi";
reg = <0x02028000 0x4000>;
interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI1>;
@@ -241,8 +240,7 @@
ssi2: ssi@0202c000 {
compatible = "fsl,imx6sl-ssi",
- "fsl,imx51-ssi",
- "fsl,imx21-ssi";
+ "fsl,imx51-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI2>;
@@ -255,8 +253,7 @@
ssi3: ssi@02030000 {
compatible = "fsl,imx6sl-ssi",
- "fsl,imx51-ssi",
- "fsl,imx21-ssi";
+ "fsl,imx51-ssi";
reg = <0x02030000 0x4000>;
interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI3>;
@@ -403,6 +400,7 @@
reg = <0x020b8000 0x4000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
+ status = "disabled";
};
wdog1: wdog@020bc000 {
@@ -607,7 +605,7 @@
};
sdma: sdma@020ec000 {
- compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma";
+ compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SDMA>,
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
new file mode 100644
index 0000000..3e0b816
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -0,0 +1,1544 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6SX_PINFUNC_H
+#define __DTS_IMX6SX_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x0014 0x035C 0x07A8 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT 0x0014 0x035C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK 0x0014 0x035C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT 0x0014 0x035C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY 0x0014 0x035C 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0 0x0014 0x035C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5 0x0014 0x035C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1 0x0014 0x035C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x0018 0x0360 0x07AC 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B 0x0018 0x0360 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK 0x0018 0x0360 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO01__CCM_STOP 0x0018 0x0360 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B 0x0018 0x0360 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1 0x0018 0x0360 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL 0x0018 0x0360 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0 0x0018 0x0360 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x001C 0x0364 0x07B0 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B 0x001C 0x0364 0x0864 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK 0x001C 0x0364 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK 0x001C 0x0364 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B 0x001C 0x0364 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2 0x001C 0x0364 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B 0x001C 0x0364 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO02__PHY_TDI 0x001C 0x0364 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x0020 0x0368 0x07B4 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP 0x0020 0x0368 0x0868 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M 0x0020 0x0368 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK 0x0020 0x0368 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B 0x0020 0x0368 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3 0x0020 0x0368 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP 0x0020 0x0368 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO03__PHY_TCK 0x0020 0x0368 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_RX 0x0024 0x036C 0x0830 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_TX 0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B 0x0024 0x036C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC 0x0024 0x036C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT 0x0024 0x036C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2 0x0024 0x036C 0x076C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4 0x0024 0x036C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP 0x0024 0x036C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO04__PHY_TMS 0x0024 0x036C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO05__UART1_RX 0x0028 0x0370 0x0830 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO05__UART1_TX 0x0028 0x0370 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT 0x0028 0x0370 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO 0x0028 0x0370 0x0764 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK 0x0028 0x0370 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1 0x0028 0x0370 0x0760 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5 0x0028 0x0370 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK 0x0028 0x0370 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO05__PHY_TDO 0x0028 0x0370 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_RX 0x002C 0x0374 0x0838 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_TX 0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B 0x002C 0x0374 0x086C 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC 0x002C 0x0374 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK 0x002C 0x0374 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B 0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6 0x002C 0x0374 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET 0x002C 0x0374 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x002C 0x0374 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART2_RX 0x0030 0x0378 0x0838 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART2_TX 0x0030 0x0378 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44 0x0030 0x0378 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x0034 0x037C 0x0860 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0034 0x037C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0 0x0034 0x037C 0x081C 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x0034 0x037C 0x069C 0x3 0x1
+#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B 0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x0034 0x037C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET 0x0034 0x037C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT 0x0034 0x037C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43 0x0034 0x037C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR 0x0038 0x0380 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42 0x0038 0x0380 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x003C 0x0384 0x0624 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK 0x003C 0x0384 0x0828 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT 0x003C 0x0384 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1 0x003C 0x0384 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD 0x003C 0x0384 0x070C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10 0x003C 0x0384 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB 0x003C 0x0384 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3 0x003C 0x0384 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41 0x003C 0x0384 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC 0x0040 0x0388 0x085C 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN 0x0040 0x0388 0x0824 0x1 0x2
+#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT 0x0040 0x0388 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x0040 0x0388 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO11__MLB_DATA 0x0040 0x0388 0x07EC 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11 0x0040 0x0388 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0 0x0040 0x0388 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2 0x0040 0x0388 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40 0x0040 0x0388 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR 0x0044 0x038C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT 0x0044 0x038C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT 0x0044 0x038C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x0044 0x038C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO12__MLB_CLK 0x0044 0x038C 0x07E8 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x0044 0x038C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1 0x0044 0x038C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1 0x0044 0x038C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39 0x0044 0x038C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x0048 0x0390 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID 0x0048 0x0390 0x0628 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x0048 0x0390 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2 0x0048 0x0390 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO13__MLB_SIG 0x0048 0x0390 0x07F0 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13 0x0048 0x0390 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2 0x0048 0x0390 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0 0x0048 0x0390 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38 0x0048 0x0390 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2 0x004C 0x0394 0x06A8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK 0x004C 0x0394 0x078C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x004C 0x0394 0x0684 0x2 0x1
+#define MX6SX_PAD_CSI_DATA00__I2C1_SCL 0x004C 0x0394 0x07A8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x004C 0x0394 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14 0x004C 0x0394 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23 0x004C 0x0394 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x004C 0x0394 0x0800 0x7 0x0
+#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4 0x004C 0x0394 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37 0x004C 0x0394 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3 0x0050 0x0398 0x06AC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS 0x0050 0x0398 0x077C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x0050 0x0398 0x0688 0x2 0x1
+#define MX6SX_PAD_CSI_DATA01__I2C1_SDA 0x0050 0x0398 0x07AC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x0050 0x0398 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15 0x0050 0x0398 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22 0x0050 0x0398 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x0050 0x0398 0x0804 0x7 0x0
+#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5 0x0050 0x0398 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38 0x0050 0x0398 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4 0x0054 0x039C 0x06B0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK 0x0054 0x039C 0x0788 0x1 0x1
+#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC 0x0054 0x039C 0x067C 0x2 0x1
+#define MX6SX_PAD_CSI_DATA02__KPP_COL_5 0x0054 0x039C 0x07C8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x0054 0x039C 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16 0x0054 0x039C 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21 0x0054 0x039C 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK 0x0054 0x039C 0x07F4 0x7 0x0
+#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6 0x0054 0x039C 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39 0x0054 0x039C 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5 0x0058 0x03A0 0x06B4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS 0x0058 0x03A0 0x0778 0x1 0x1
+#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS 0x0058 0x03A0 0x0680 0x2 0x1
+#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5 0x0058 0x03A0 0x07D4 0x3 0x0
+#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x0058 0x03A0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x0058 0x03A0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20 0x0058 0x03A0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC 0x0058 0x03A0 0x07FC 0x7 0x0
+#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7 0x0058 0x03A0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40 0x0058 0x03A0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6 0x005C 0x03A4 0x06B8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x005C 0x03A4 0x0794 0x1 0x1
+#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT 0x005C 0x03A4 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_DATA04__KPP_COL_6 0x005C 0x03A4 0x07CC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_RX 0x005C 0x03A4 0x0858 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_TX 0x005C 0x03A4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x005C 0x03A4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19 0x005C 0x03A4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA04__PWM5_OUT 0x005C 0x03A4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8 0x005C 0x03A4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41 0x005C 0x03A4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7 0x0060 0x03A8 0x06BC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x0060 0x03A8 0x07A0 0x1 0x1
+#define MX6SX_PAD_CSI_DATA05__SPDIF_IN 0x0060 0x03A8 0x0824 0x2 0x1
+#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6 0x0060 0x03A8 0x07D8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_RX 0x0060 0x03A8 0x0858 0x4 0x1
+#define MX6SX_PAD_CSI_DATA05__UART6_TX 0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x0060 0x03A8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18 0x0060 0x03A8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA05__PWM6_OUT 0x0060 0x03A8 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9 0x0060 0x03A8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42 0x0060 0x03A8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8 0x0064 0x03AC 0x06C0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x0064 0x03AC 0x0798 0x1 0x1
+#define MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x0064 0x03AC 0x07C0 0x2 0x2
+#define MX6SX_PAD_CSI_DATA06__KPP_COL_7 0x0064 0x03AC 0x07D0 0x3 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20 0x0064 0x03AC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17 0x0064 0x03AC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT 0x0064 0x03AC 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10 0x0064 0x03AC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43 0x0064 0x03AC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9 0x0068 0x03B0 0x06C4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2
+#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1
+#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11 0x0068 0x03B0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44 0x0068 0x03B0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC 0x006C 0x03B4 0x0700 0x0 0x0
+#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x006C 0x03B4 0x0790 0x1 0x1
+#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x006C 0x03B4 0x0678 0x2 0x1
+#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B 0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT 0x006C 0x03B4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22 0x006C 0x03B4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25 0x006C 0x03B4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x006C 0x03B4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2 0x006C 0x03B4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35 0x006C 0x03B4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK 0x0070 0x03B8 0x0000 0x0 0x0
+#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK 0x0070 0x03B8 0x0784 0x1 0x1
+#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x0070 0x03B8 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_MCLK__UART4_RX 0x0070 0x03B8 0x0848 0x3 0x2
+#define MX6SX_PAD_CSI_MCLK__UART4_TX 0x0070 0x03B8 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT 0x0070 0x03B8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23 0x0070 0x03B8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26 0x0070 0x03B8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD 0x0070 0x03B8 0x070C 0x7 0x0
+#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1 0x0070 0x03B8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34 0x0070 0x03B8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK 0x0074 0x03BC 0x0704 0x0 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK 0x0074 0x03BC 0x0780 0x1 0x1
+#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x0074 0x03BC 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_RX 0x0074 0x03BC 0x0848 0x3 0x3
+#define MX6SX_PAD_CSI_PIXCLK__UART4_TX 0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT 0x0074 0x03BC 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x0074 0x03BC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27 0x0074 0x03BC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK 0x0074 0x03BC 0x0784 0x7 0x2
+#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK 0x0074 0x03BC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33 0x0074 0x03BC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0
+#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1
+#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3
+#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x0078 0x03C0 0x07F8 0x7 0x0
+#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3 0x0078 0x03C0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36 0x0078 0x03C0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_COL__ENET1_COL 0x007C 0x03C4 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_COL__ENET2_MDC 0x007C 0x03C4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC 0x007C 0x03C4 0x0654 0x2 0x1
+#define MX6SX_PAD_ENET1_COL__UART1_RI_B 0x007C 0x03C4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK 0x007C 0x03C4 0x0828 0x4 0x1
+#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x007C 0x03C4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23 0x007C 0x03C4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16 0x007C 0x03C4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37 0x007C 0x03C4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31 0x007C 0x03C4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET1_CRS 0x0080 0x03C8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0x0080 0x03C8 0x0770 0x1 0x1
+#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD 0x0080 0x03C8 0x0648 0x2 0x1
+#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B 0x0080 0x03C8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK 0x0080 0x03C8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x0080 0x03C8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22 0x0080 0x03C8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17 0x0080 0x03C8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36 0x0080 0x03C8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30 0x0080 0x03C8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x0084 0x03CC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET2_MDC 0x0084 0x03CC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS 0x0084 0x03CC 0x0638 0x2 0x1
+#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT 0x0084 0x03CC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT 0x0084 0x03CC 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2 0x0084 0x03CC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR 0x0084 0x03CC 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_MDC__PWM7_OUT 0x0084 0x03CC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x0088 0x03D0 0x0764 0x0 0x1
+#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO 0x0088 0x03D0 0x0770 0x1 0x2
+#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK 0x0088 0x03D0 0x0000 0x2 0x0
+#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT 0x0088 0x03D0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT 0x0088 0x03D0 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3 0x0088 0x03D0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC 0x0088 0x03D0 0x0860 0x6 0x1
+#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT 0x0088 0x03D0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK 0x008C 0x03D4 0x0768 0x0 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M 0x008C 0x03D4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS 0x008C 0x03D4 0x0658 0x2 0x1
+#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B 0x008C 0x03D4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT 0x008C 0x03D4 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0x008C 0x03D4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21 0x008C 0x03D4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18 0x008C 0x03D4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35 0x008C 0x03D4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29 0x008C 0x03D4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x0090 0x03D8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x0090 0x03D8 0x0760 0x1 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD 0x0090 0x03D8 0x0644 0x2 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B 0x0090 0x03D8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK 0x0090 0x03D8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0x0090 0x03D8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20 0x0090 0x03D8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19 0x0090 0x03D8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34 0x0090 0x03D8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28 0x0090 0x03D8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_COL__ENET2_COL 0x0094 0x03DC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_COL__ENET1_MDC 0x0094 0x03DC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC 0x0094 0x03DC 0x064C 0x2 0x1
+#define MX6SX_PAD_ENET2_COL__UART1_RX 0x0094 0x03DC 0x0830 0x3 0x2
+#define MX6SX_PAD_ENET2_COL__UART1_TX 0x0094 0x03DC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_COL__SPDIF_IN 0x0094 0x03DC 0x0824 0x4 0x3
+#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x0094 0x03DC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID 0x0094 0x03DC 0x0624 0x6 0x1
+#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20 0x0094 0x03DC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33 0x0094 0x03DC 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27 0x0094 0x03DC 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET2_CRS 0x0098 0x03E0 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO 0x0098 0x03E0 0x0764 0x1 0x2
+#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS 0x0098 0x03E0 0x0650 0x2 0x1
+#define MX6SX_PAD_ENET2_CRS__UART1_RX 0x0098 0x03E0 0x0830 0x3 0x3
+#define MX6SX_PAD_ENET2_CRS__UART1_TX 0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__MLB_SIG 0x0098 0x03E0 0x07F0 0x4 0x1
+#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x0098 0x03E0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID 0x0098 0x03E0 0x0628 0x6 0x1
+#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21 0x0098 0x03E0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32 0x0098 0x03E0 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26 0x0098 0x03E0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK 0x009C 0x03E4 0x0774 0x0 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x009C 0x03E4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL 0x009C 0x03E4 0x07B8 0x2 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B 0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA 0x009C 0x03E4 0x07EC 0x4 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0x009C 0x03E4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC 0x009C 0x03E4 0x085C 0x6 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22 0x009C 0x03E4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31 0x009C 0x03E4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25 0x009C 0x03E4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3
+#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23 0x00A0 0x03E8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30 0x00A0 0x03E8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24 0x00A0 0x03E8 0x0000 0x9 0x0
+#define MX6SX_PAD_KEY_COL0__KPP_COL_0 0x00A4 0x03EC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B 0x00A4 0x03EC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL0__UART6_RTS_B 0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x00A4 0x03EC 0x0710 0x3 0x0
+#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x00A4 0x03EC 0x066C 0x4 0x0
+#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x00A4 0x03EC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1 0x00A4 0x03EC 0x0820 0x6 0x1
+#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK 0x00A4 0x03EC 0x0814 0x7 0x0
+#define MX6SX_PAD_KEY_COL0__VADC_DATA_0 0x00A4 0x03EC 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_COL1__KPP_COL_1 0x00A8 0x03F0 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B 0x00A8 0x03F0 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_RX 0x00A8 0x03F0 0x0858 0x2 0x2
+#define MX6SX_PAD_KEY_COL1__UART6_TX 0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x00A8 0x03F0 0x0714 0x3 0x0
+#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x00A8 0x03F0 0x0670 0x4 0x0
+#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x00A8 0x03F0 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET 0x00A8 0x03F0 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC 0x00A8 0x03F0 0x0818 0x7 0x0
+#define MX6SX_PAD_KEY_COL2__KPP_COL_2 0x00AC 0x03F4 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B 0x00AC 0x03F4 0x0874 0x1 0x1
+#define MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__CAN1_TX 0x00AC 0x03F4 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL2__CANFD_TX1 0x00AC 0x03F4 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x00AC 0x03F4 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30 0x00AC 0x03F4 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY 0x00AC 0x03F4 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL3__KPP_COL_3 0x00B0 0x03F8 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL 0x00B0 0x03F8 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_RX 0x00B0 0x03F8 0x0850 0x2 0x2
+#define MX6SX_PAD_KEY_COL3__UART5_TX 0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__CAN2_TX 0x00B0 0x03F8 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL3__CANFD_TX2 0x00B0 0x03F8 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13 0x00B0 0x03F8 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28 0x00B0 0x03F8 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2 0x00B0 0x03F8 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL4__KPP_COL_4 0x00B4 0x03FC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL4__ENET2_MDC 0x00B4 0x03FC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL4__I2C3_SCL 0x00B4 0x03FC 0x07B8 0x2 0x2
+#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL 0x00B4 0x03FC 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC 0x00B4 0x03FC 0x0664 0x4 0x0
+#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14 0x00B4 0x03FC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL4__WEIM_CRE 0x00B4 0x03FC 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3
+#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0
+#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0
+#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0 0x00B8 0x0400 0x081C 0x6 0x1
+#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0 0x00B8 0x0400 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__GPU_IDLE 0x00B8 0x0400 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1 0x00BC 0x0404 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT 0x00BC 0x0404 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW1__UART6_RX 0x00BC 0x0404 0x0858 0x2 0x3
+#define MX6SX_PAD_KEY_ROW1__UART6_TX 0x00BC 0x0404 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0 0x00BC 0x0404 0x071C 0x3 0x0
+#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x00BC 0x0404 0x065C 0x4 0x0
+#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x00BC 0x0404 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31 0x00BC 0x0404 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0 0x00BC 0x0404 0x080C 0x7 0x0
+#define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3
+#define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1
+#define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1
+#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29 0x00C0 0x0408 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3 0x00C0 0x0408 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3 0x00C4 0x040C 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL 0x00C4 0x040C 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW3__UART5_RX 0x00C4 0x040C 0x0850 0x2 0x3
+#define MX6SX_PAD_KEY_ROW3__UART5_TX 0x00C4 0x040C 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW3__CAN2_RX 0x00C4 0x040C 0x0690 0x3 0x1
+#define MX6SX_PAD_KEY_ROW3__CANFD_RX2 0x00C4 0x040C 0x0698 0x4 0x1
+#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18 0x00C4 0x040C 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B 0x00C4 0x040C 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1 0x00C4 0x040C 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4 0x00C8 0x0410 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO 0x00C8 0x0410 0x0770 0x1 0x3
+#define MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x00C8 0x0410 0x07BC 0x2 0x2
+#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL 0x00C8 0x0410 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS 0x00C8 0x0410 0x0668 0x4 0x0
+#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x00C8 0x0410 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN 0x00C8 0x0410 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC 0x00C8 0x0410 0x0810 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x00CC 0x0414 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN 0x00CC 0x0414 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC 0x00CC 0x0414 0x0634 0x2 0x1
+#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN 0x00CC 0x0414 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16 0x00CC 0x0414 0x06DC 0x4 0x0
+#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0 0x00CC 0x0414 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_CLK__USDHC1_WP 0x00CC 0x0414 0x0868 0x6 0x0
+#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16 0x00CC 0x0414 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0 0x00CC 0x0414 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0 0x00CC 0x0414 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x00D0 0x0418 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B 0x00D0 0x0418 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0 0x00D0 0x0418 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0 0x00D0 0x0418 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20 0x00D0 0x0418 0x06EC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1 0x00D0 0x0418 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0 0x00D0 0x0418 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21 0x00D0 0x0418 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5 0x00D0 0x0418 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5 0x00D0 0x0418 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x00D4 0x041C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B 0x00D4 0x041C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1 0x00D4 0x041C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1 0x00D4 0x041C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21 0x00D4 0x041C 0x06F0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2 0x00D4 0x041C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1 0x00D4 0x041C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22 0x00D4 0x041C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6 0x00D4 0x041C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6 0x00D4 0x041C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x00D8 0x0420 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B 0x00D8 0x0420 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2 0x00D8 0x0420 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2 0x00D8 0x0420 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22 0x00D8 0x0420 0x06F4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3 0x00D8 0x0420 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2 0x00D8 0x0420 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23 0x00D8 0x0420 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7 0x00D8 0x0420 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7 0x00D8 0x0420 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x00DC 0x0424 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24 0x00DC 0x0424 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3 0x00DC 0x0424 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3 0x00DC 0x0424 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23 0x00DC 0x0424 0x06F8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4 0x00DC 0x0424 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3 0x00DC 0x0424 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24 0x00DC 0x0424 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8 0x00DC 0x0424 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8 0x00DC 0x0424 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x00E0 0x0428 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25 0x00E0 0x0428 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4 0x00E0 0x0428 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC 0x00E0 0x0428 0x0708 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5 0x00E0 0x0428 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4 0x00E0 0x0428 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25 0x00E0 0x0428 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9 0x00E0 0x0428 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9 0x00E0 0x0428 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x00E4 0x042C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26 0x00E4 0x042C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5 0x00E4 0x042C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC 0x00E4 0x042C 0x0700 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6 0x00E4 0x042C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5 0x00E4 0x042C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26 0x00E4 0x042C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10 0x00E4 0x042C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10 0x00E4 0x042C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x00E8 0x0430 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2 0x00E8 0x0430 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6 0x00E8 0x0430 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK 0x00E8 0x0430 0x0704 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7 0x00E8 0x0430 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6 0x00E8 0x0430 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27 0x00E8 0x0430 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11 0x00E8 0x0430 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11 0x00E8 0x0430 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x00EC 0x0434 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3 0x00EC 0x0434 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7 0x00EC 0x0434 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK 0x00EC 0x0434 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8 0x00EC 0x0434 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7 0x00EC 0x0434 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28 0x00EC 0x0434 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12 0x00EC 0x0434 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12 0x00EC 0x0434 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x00F0 0x0438 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8 0x00F0 0x0438 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8 0x00F0 0x0438 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9 0x00F0 0x0438 0x06C4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9 0x00F0 0x0438 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8 0x00F0 0x0438 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29 0x00F0 0x0438 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13 0x00F0 0x0438 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13 0x00F0 0x0438 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x00F4 0x043C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9 0x00F4 0x043C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9 0x00F4 0x043C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8 0x00F4 0x043C 0x06C0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10 0x00F4 0x043C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9 0x00F4 0x043C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30 0x00F4 0x043C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14 0x00F4 0x043C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14 0x00F4 0x043C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x00F8 0x0440 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10 0x00F8 0x0440 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10 0x00F8 0x0440 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7 0x00F8 0x0440 0x06BC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11 0x00F8 0x0440 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10 0x00F8 0x0440 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31 0x00F8 0x0440 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15 0x00F8 0x0440 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15 0x00F8 0x0440 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x00FC 0x0444 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11 0x00FC 0x0444 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11 0x00FC 0x0444 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6 0x00FC 0x0444 0x06B8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12 0x00FC 0x0444 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11 0x00FC 0x0444 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0 0x00FC 0x0444 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16 0x00FC 0x0444 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16 0x00FC 0x0444 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x0100 0x0448 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12 0x0100 0x0448 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12 0x0100 0x0448 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5 0x0100 0x0448 0x06B4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13 0x0100 0x0448 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12 0x0100 0x0448 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1 0x0100 0x0448 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17 0x0100 0x0448 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17 0x0100 0x0448 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x0104 0x044C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13 0x0104 0x044C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13 0x0104 0x044C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4 0x0104 0x044C 0x06B0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14 0x0104 0x044C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13 0x0104 0x044C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2 0x0104 0x044C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18 0x0104 0x044C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18 0x0104 0x044C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x0108 0x0450 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14 0x0108 0x0450 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14 0x0108 0x0450 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3 0x0108 0x0450 0x06AC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15 0x0108 0x0450 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14 0x0108 0x0450 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK 0x0108 0x0450 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19 0x0108 0x0450 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19 0x0108 0x0450 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x010C 0x0454 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15 0x010C 0x0454 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15 0x010C 0x0454 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2 0x010C 0x0454 0x06A8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16 0x010C 0x0454 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15 0x010C 0x0454 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0 0x010C 0x0454 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0 0x010C 0x0454 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20 0x010C 0x0454 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x0110 0x0458 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16 0x0110 0x0458 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK 0x0110 0x0458 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK 0x0110 0x0458 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1 0x0110 0x0458 0x06A4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17 0x0110 0x0458 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24 0x0110 0x0458 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1 0x0110 0x0458 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1 0x0110 0x0458 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21 0x0110 0x0458 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x0114 0x045C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17 0x0114 0x045C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL 0x0114 0x045C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0 0x0114 0x045C 0x06A0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18 0x0114 0x045C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25 0x0114 0x045C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2 0x0114 0x045C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2 0x0114 0x045C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22 0x0114 0x045C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x0118 0x0460 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18 0x0118 0x0460 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO 0x0118 0x0460 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO 0x0118 0x0460 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15 0x0118 0x0460 0x06D8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19 0x0118 0x0460 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26 0x0118 0x0460 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3 0x0118 0x0460 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3 0x0118 0x0460 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23 0x0118 0x0460 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x011C 0x0464 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19 0x011C 0x0464 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO 0x011C 0x0464 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14 0x011C 0x0464 0x06D4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20 0x011C 0x0464 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27 0x011C 0x0464 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT 0x011C 0x0464 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4 0x011C 0x0464 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24 0x011C 0x0464 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x0120 0x0468 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20 0x0120 0x0468 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT 0x0120 0x0468 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT 0x0120 0x0468 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13 0x0120 0x0468 0x06D0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21 0x0120 0x0468 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28 0x0120 0x0468 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP 0x0120 0x0468 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5 0x0120 0x0468 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25 0x0120 0x0468 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x0124 0x046C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21 0x0124 0x046C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT 0x0124 0x046C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT 0x0124 0x046C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12 0x0124 0x046C 0x06CC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22 0x0124 0x046C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29 0x0124 0x046C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0 0x0124 0x046C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6 0x0124 0x046C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26 0x0124 0x046C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x0128 0x0470 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22 0x0128 0x0470 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT 0x0128 0x0470 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT 0x0128 0x0470 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11 0x0128 0x0470 0x06C8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23 0x0128 0x0470 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30 0x0128 0x0470 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1 0x0128 0x0470 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7 0x0128 0x0470 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27 0x0128 0x0470 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x012C 0x0474 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23 0x012C 0x0474 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT 0x012C 0x0474 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT 0x012C 0x0474 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10 0x012C 0x0474 0x06FC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24 0x012C 0x0474 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31 0x012C 0x0474 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2 0x012C 0x0474 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8 0x012C 0x0474 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28 0x012C 0x0474 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x0130 0x0478 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E 0x0130 0x0478 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC 0x0130 0x0478 0x063C 0x2 0x1
+#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN 0x0130 0x0478 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17 0x0130 0x0478 0x06E0 0x4 0x0
+#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25 0x0130 0x0478 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B 0x0130 0x0478 0x0864 0x6 0x0
+#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17 0x0130 0x0478 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1 0x0130 0x0478 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1 0x0130 0x0478 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x0134 0x047C 0x07E0 0x0 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS 0x0134 0x047C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD 0x0134 0x047C 0x0630 0x2 0x1
+#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN 0x0134 0x047C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18 0x0134 0x047C 0x06E4 0x4 0x0
+#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x0134 0x047C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP 0x0134 0x047C 0x0870 0x6 0x0
+#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18 0x0134 0x047C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2 0x0134 0x047C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2 0x0134 0x047C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET 0x0138 0x0480 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS 0x0138 0x0480 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD 0x0138 0x0480 0x062C 0x2 0x1
+#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI 0x0138 0x0480 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_RESET__M4_EVENTI 0x0138 0x0480 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x0138 0x0480 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY 0x0138 0x0480 0x069C 0x6 0x0
+#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20 0x0138 0x0480 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4 0x0138 0x0480 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4 0x0138 0x0480 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x013C 0x0484 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY 0x013C 0x0484 0x07E0 0x1 0x1
+#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS 0x013C 0x0484 0x0640 0x2 0x1
+#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN 0x013C 0x0484 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19 0x013C 0x0484 0x06E8 0x4 0x0
+#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x013C 0x0484 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B 0x013C 0x0484 0x086C 0x6 0x0
+#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19 0x013C 0x0484 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3 0x013C 0x0484 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3 0x013C 0x0484 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE 0x0140 0x0488 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_ALE__I2C3_SDA 0x0140 0x0488 0x07BC 0x1 0x0
+#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x0140 0x0488 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0 0x0140 0x0488 0x072C 0x3 0x0
+#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2 0x0140 0x0488 0x079C 0x4 0x0
+#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0 0x0140 0x0488 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B 0x0140 0x0488 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0 0x0140 0x0488 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN 0x0140 0x0488 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12 0x0140 0x0488 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0144 0x048C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT 0x0144 0x048C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x0144 0x048C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC 0x0144 0x048C 0x0654 0x3 0x0
+#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK 0x0144 0x048C 0x078C 0x4 0x0
+#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x0144 0x048C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B 0x0144 0x048C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3 0x0144 0x048C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ 0x0144 0x048C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9 0x0144 0x048C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x0148 0x0490 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B 0x0148 0x0490 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x0148 0x0490 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD 0x0148 0x0490 0x0648 0x3 0x0
+#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0 0x0148 0x0490 0x0790 0x4 0x0
+#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2 0x0148 0x0490 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE1_B__WEIM_OE 0x0148 0x0490 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4 0x0148 0x0490 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE 0x0148 0x0490 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8 0x0148 0x0490 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE 0x014C 0x0494 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CLE__I2C3_SCL 0x014C 0x0494 0x07B8 0x1 0x0
+#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x014C 0x0494 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK 0x014C 0x0494 0x0720 0x3 0x0
+#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3 0x014C 0x0494 0x0798 0x4 0x0
+#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x014C 0x0494 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CLE__WEIM_BCLK 0x014C 0x0494 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CLE__TPSMP_CLK 0x014C 0x0494 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP 0x014C 0x0494 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13 0x014C 0x0494 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00 0x0150 0x0498 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4 0x0150 0x0498 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x0150 0x0498 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO 0x0150 0x0498 0x0754 0x3 0x0
+#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK 0x0150 0x0498 0x0788 0x4 0x0
+#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4 0x0150 0x0498 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0 0x0150 0x0498 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7 0x0150 0x0498 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET 0x0150 0x0498 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5 0x0150 0x0498 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01 0x0154 0x049C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5 0x0154 0x049C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x0154 0x049C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI 0x0154 0x049C 0x0758 0x3 0x0
+#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS 0x0154 0x049C 0x0778 0x4 0x0
+#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5 0x0154 0x049C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1 0x0154 0x049C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8 0x0154 0x049C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD 0x0154 0x049C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4 0x0154 0x049C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02 0x0158 0x04A0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6 0x0158 0x04A0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x0158 0x04A0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK 0x0158 0x04A0 0x0750 0x3 0x0
+#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK 0x0158 0x04A0 0x0784 0x4 0x0
+#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6 0x0158 0x04A0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2 0x0158 0x04A0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9 0x0158 0x04A0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV 0x0158 0x04A0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3 0x0158 0x04A0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03 0x015C 0x04A4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7 0x015C 0x04A4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x015C 0x04A4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0 0x015C 0x04A4 0x075C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK 0x015C 0x04A4 0x0780 0x4 0x0
+#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7 0x015C 0x04A4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3 0x015C 0x04A4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10 0x015C 0x04A4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH 0x015C 0x04A4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6 0x015C 0x04A4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04 0x0160 0x04A8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4 0x0160 0x04A8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B 0x0160 0x04A8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B 0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS 0x0160 0x04A8 0x0650 0x4 0x0
+#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x0160 0x04A8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4 0x0160 0x04A8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11 0x0160 0x04A8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH 0x0160 0x04A8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0 0x0160 0x04A8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1
+#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0
+#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12 0x0164 0x04AC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET 0x0164 0x04AC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1 0x0164 0x04AC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06 0x0168 0x04B0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6 0x0168 0x04B0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B 0x0168 0x04B0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_RX 0x0168 0x04B0 0x0840 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_TX 0x0168 0x04B0 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__PWM3_OUT 0x0168 0x04B0 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0x0168 0x04B0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6 0x0168 0x04B0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13 0x0168 0x04B0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD 0x0168 0x04B0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2 0x0168 0x04B0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07 0x016C 0x04B4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7 0x016C 0x04B4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS 0x016C 0x04B4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_RX 0x016C 0x04B4 0x0840 0x3 0x1
+#define MX6SX_PAD_NAND_DATA07__UART3_TX 0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__PWM4_OUT 0x016C 0x04B4 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0x016C 0x04B4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7 0x016C 0x04B4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14 0x016C 0x04B4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD 0x016C 0x04B4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3 0x016C 0x04B4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B 0x0170 0x04B8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B 0x0170 0x04B8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x0170 0x04B8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS 0x0170 0x04B8 0x0658 0x3 0x0
+#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS 0x0170 0x04B8 0x077C 0x4 0x0
+#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x0170 0x04B8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_RE_B__WEIM_RW 0x0170 0x04B8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5 0x0170 0x04B8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD 0x0170 0x04B8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7 0x0170 0x04B8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B 0x0174 0x04BC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT 0x0174 0x04BC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x0174 0x04BC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO 0x0174 0x04BC 0x0724 0x3 0x0
+#define MX6SX_PAD_NAND_READY_B__ESAI_TX1 0x0174 0x04BC 0x0794 0x4 0x0
+#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x0174 0x04BC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1 0x0174 0x04BC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2 0x0174 0x04BC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN 0x0174 0x04BC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10 0x0174 0x04BC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B 0x0178 0x04C0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT 0x0178 0x04C0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x0178 0x04C0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD 0x0178 0x04C0 0x0644 0x3 0x0
+#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0 0x0178 0x04C0 0x07A4 0x4 0x0
+#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x0178 0x04C0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT 0x0178 0x04C0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6 0x0178 0x04C0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV 0x0178 0x04C0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6 0x0178 0x04C0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B 0x017C 0x04C4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B 0x017C 0x04C4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x017C 0x04C4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI 0x017C 0x04C4 0x0728 0x3 0x0
+#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1 0x017C 0x04C4 0x07A0 0x4 0x0
+#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x017C 0x04C4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0 0x017C 0x04C4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1 0x017C 0x04C4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE 0x017C 0x04C4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11 0x017C 0x04C4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0 0x0180 0x04C8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x0180 0x04C8 0x085C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI 0x0180 0x04C8 0x0718 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1 0x0180 0x04C8 0x07A0 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14 0x0180 0x04C8 0x06D4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x0180 0x04C8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6 0x0180 0x04C8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3 0x0180 0x04C8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3 0x0180 0x04C8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1 0x0184 0x04CC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID 0x0184 0x04CC 0x0624 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO 0x0184 0x04CC 0x0714 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1 0x0184 0x04CC 0x0794 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13 0x0184 0x04CC 0x06D0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x0184 0x04CC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5 0x0184 0x04CC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4 0x0184 0x04CC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0 0x0184 0x04CC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2 0x0188 0x04D0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR 0x0188 0x04D0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1 0x0188 0x04D0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK 0x0188 0x04D0 0x078C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12 0x0188 0x04D0 0x06CC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x0188 0x04D0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4 0x0188 0x04D0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6 0x0188 0x04D0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1 0x0188 0x04D0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3 0x018C 0x04D4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC 0x018C 0x04D4 0x0860 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2 0x018C 0x04D4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0 0x018C 0x04D4 0x0790 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11 0x018C 0x04D4 0x06C8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x018C 0x04D4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3 0x018C 0x04D4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7 0x018C 0x04D4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2 0x018C 0x04D4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS 0x0190 0x04D8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x0190 0x04D8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2 0x0190 0x04D8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI 0x0190 0x04D8 0x0758 0x3 0x1
+#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15 0x0190 0x04D8 0x06D8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20 0x0190 0x04D8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7 0x0190 0x04D8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13 0x0190 0x04D8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4 0x0190 0x04D8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK 0x0194 0x04DC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID 0x0194 0x04DC 0x0628 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK 0x0194 0x04DC 0x0710 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3 0x0194 0x04DC 0x0798 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1 0x0194 0x04DC 0x06A4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21 0x0194 0x04DC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0 0x0194 0x04DC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0 0x0194 0x04DC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5 0x0194 0x04DC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B 0x0198 0x04E0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR 0x0198 0x04E0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0 0x0198 0x04E0 0x071C 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2 0x0198 0x04E0 0x079C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0 0x0198 0x04E0 0x06A0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0x0198 0x04E0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1 0x0198 0x04E0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1 0x0198 0x04E0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4 0x0198 0x04E0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B 0x019C 0x04E4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x019C 0x04E4 0x068C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1 0x019C 0x04E4 0x0694 0x2 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO 0x019C 0x04E4 0x0754 0x3 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10 0x019C 0x04E4 0x06FC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23 0x019C 0x04E4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2 0x019C 0x04E4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4
+#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x01A0 0x04E8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14 0x01A0 0x04E8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9 0x01A0 0x04E8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 0x01A4 0x04EC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B 0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO 0x01A4 0x04EC 0x0734 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK 0x01A4 0x04EC 0x0788 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21 0x01A4 0x04EC 0x06F0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x01A4 0x04EC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13 0x01A4 0x04EC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8 0x01A4 0x04EC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2 0x01A8 0x04F0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA 0x01A8 0x04F0 0x07B4 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY 0x01A8 0x04F0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0 0x01A8 0x04F0 0x07A4 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20 0x01A8 0x04F0 0x06EC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0x01A8 0x04F0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12 0x01A8 0x04F0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5 0x01A8 0x04F0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3 0x01AC 0x04F4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL 0x01AC 0x04F4 0x07B0 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3 0x01AC 0x04F4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS 0x01AC 0x04F4 0x077C 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19 0x01AC 0x04F4 0x06E8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x01AC 0x04F4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11 0x01AC 0x04F4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2 0x01AC 0x04F4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS 0x01B0 0x04F8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x01B0 0x04F8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1 0x01B0 0x04F8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0 0x01B0 0x04F8 0x075C 0x3 0x1
+#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23 0x01B0 0x04F8 0x06F8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28 0x01B0 0x04F8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15 0x01B0 0x04F8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x01B4 0x04FC 0x0840 0x1 0x4
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX 0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2
+#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29 0x01B4 0x04FC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8 0x01B4 0x04FC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11 0x01B4 0x04FC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B 0x01B8 0x0500 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX 0x01B8 0x0500 0x0840 0x1 0x5
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0 0x01B8 0x0500 0x073C 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK 0x01B8 0x0500 0x0784 0x3 0x3
+#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17 0x01B8 0x0500 0x06E0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30 0x01B8 0x0500 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9 0x01B8 0x0500 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10 0x01B8 0x0500 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B 0x01BC 0x0504 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x01BC 0x0504 0x0690 0x1 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2 0x01BC 0x0504 0x0698 0x2 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK 0x01BC 0x0504 0x0750 0x3 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18 0x01BC 0x0504 0x06E4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31 0x01BC 0x0504 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10 0x01BC 0x0504 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14 0x01BC 0x0504 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x01C0 0x0508 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0 0x01C0 0x0508 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10 0x01C0 0x0508 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0 0x01C0 0x0508 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER 0x01C0 0x0508 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0 0x01C0 0x0508 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x01C4 0x050C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1 0x01C4 0x050C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11 0x01C4 0x050C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1 0x01C4 0x050C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER 0x01C4 0x050C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1 0x01C4 0x050C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x01C8 0x0510 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2 0x01C8 0x0510 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12 0x01C8 0x0510 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2 0x01C8 0x0510 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER 0x01C8 0x0510 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2 0x01C8 0x0510 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x01CC 0x0514 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3 0x01CC 0x0514 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13 0x01CC 0x0514 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3 0x01CC 0x0514 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER 0x01CC 0x0514 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3 0x01CC 0x0514 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x01D0 0x0518 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4 0x01D0 0x0518 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14 0x01D0 0x0518 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0 0x01D0 0x0518 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER 0x01D0 0x0518 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4 0x01D0 0x0518 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x01D4 0x051C 0x0768 0x0 0x1
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x01D4 0x051C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5 0x01D4 0x051C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15 0x01D4 0x051C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1 0x01D4 0x051C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER 0x01D4 0x051C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5 0x01D4 0x051C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x01D8 0x0520 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC 0x01D8 0x0520 0x0810 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6 0x01D8 0x0520 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16 0x01D8 0x0520 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2 0x01D8 0x0520 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER 0x01D8 0x0520 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6 0x01D8 0x0520 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x01DC 0x0524 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK 0x01DC 0x0524 0x0808 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7 0x01DC 0x0524 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17 0x01DC 0x0524 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3 0x01DC 0x0524 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER 0x01DC 0x0524 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7 0x01DC 0x0524 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x01E0 0x0528 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC 0x01E0 0x0528 0x0818 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8 0x01E0 0x0528 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18 0x01E0 0x0528 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4 0x01E0 0x0528 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER 0x01E0 0x0528 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8 0x01E0 0x0528 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x01E4 0x052C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK 0x01E4 0x052C 0x0814 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x01E4 0x052C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19 0x01E4 0x052C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5 0x01E4 0x052C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER 0x01E4 0x052C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9 0x01E4 0x052C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x01E8 0x0530 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0 0x01E8 0x0530 0x080C 0x2 0x1
+#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10 0x01E8 0x0530 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0 0x01E8 0x0530 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6 0x01E8 0x0530 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER 0x01E8 0x0530 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10 0x01E8 0x0530 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x01EC 0x0534 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER 0x01EC 0x0534 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0 0x01EC 0x0534 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11 0x01EC 0x0534 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1 0x01EC 0x0534 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7 0x01EC 0x0534 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER 0x01EC 0x0534 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11 0x01EC 0x0534 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x01F0 0x0538 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT 0x01F0 0x0538 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12 0x01F0 0x0538 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2 0x01F0 0x0538 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8 0x01F0 0x0538 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18 0x01F0 0x0538 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12 0x01F0 0x0538 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x01F4 0x053C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT 0x01F4 0x053C 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13 0x01F4 0x053C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3 0x01F4 0x053C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9 0x01F4 0x053C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19 0x01F4 0x053C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13 0x01F4 0x053C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x01F8 0x0540 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x01F8 0x0540 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14 0x01F8 0x0540 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4 0x01F8 0x0540 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10 0x01F8 0x0540 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20 0x01F8 0x0540 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14 0x01F8 0x0540 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x01FC 0x0544 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x01FC 0x0544 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15 0x01FC 0x0544 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5 0x01FC 0x0544 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11 0x01FC 0x0544 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21 0x01FC 0x0544 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15 0x01FC 0x0544 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x0200 0x0548 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16 0x0200 0x0548 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6 0x0200 0x0548 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12 0x0200 0x0548 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22 0x0200 0x0548 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16 0x0200 0x0548 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x0204 0x054C 0x0774 0x0 0x1
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER 0x0204 0x054C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17 0x0204 0x054C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7 0x0204 0x054C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13 0x0204 0x054C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23 0x0204 0x054C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17 0x0204 0x054C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x0208 0x0550 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC 0x0208 0x0550 0x07FC 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT 0x0208 0x0550 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18 0x0208 0x0550 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8 0x0208 0x0550 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14 0x0208 0x0550 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24 0x0208 0x0550 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18 0x0208 0x0550 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x020C 0x0554 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK 0x020C 0x0554 0x07F4 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT 0x020C 0x0554 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19 0x020C 0x0554 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9 0x020C 0x0554 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15 0x020C 0x0554 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25 0x020C 0x0554 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19 0x020C 0x0554 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x0210 0x0558 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC 0x0210 0x0558 0x0804 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x0210 0x0558 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20 0x0210 0x0558 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC 0x0210 0x0558 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL 0x0210 0x0558 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26 0x0210 0x0558 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20 0x0210 0x0558 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x0214 0x055C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK 0x0214 0x055C 0x0800 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT 0x0214 0x055C 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x0214 0x055C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC 0x0214 0x055C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT 0x0214 0x055C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27 0x0214 0x055C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21 0x0214 0x055C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x0218 0x0560 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0 0x0218 0x0560 0x07F8 0x2 0x1
+#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22 0x0218 0x0560 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD 0x0218 0x0560 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B 0x0218 0x0560 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28 0x0218 0x0560 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22 0x0218 0x0560 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x021C 0x0564 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER 0x021C 0x0564 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0 0x021C 0x0564 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23 0x021C 0x0564 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK 0x021C 0x0564 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TXC__SJC_DONE 0x021C 0x0564 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29 0x021C 0x0564 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23 0x021C 0x0564 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CLK__USDHC1_CLK 0x0220 0x0568 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS 0x0220 0x0568 0x0668 0x1 0x1
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B 0x0220 0x0568 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CLK__GPT_CLK 0x0220 0x0568 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB 0x0220 0x0568 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0 0x0220 0x0568 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT 0x0220 0x0568 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CLK__CCM_OUT1 0x0220 0x0568 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK 0x0220 0x0568 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45 0x0220 0x0568 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CMD__USDHC1_CMD 0x0224 0x056C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC 0x0224 0x056C 0x0664 0x1 0x1
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B 0x0224 0x056C 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1 0x0224 0x056C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB 0x0224 0x056C 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1 0x0224 0x056C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN 0x0224 0x056C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x0224 0x056C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK 0x0224 0x056C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46 0x0224 0x056C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0 0x0228 0x0570 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x0228 0x0570 0x065C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS 0x0228 0x0570 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1 0x0228 0x0570 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA0__UART2_RX 0x0228 0x0570 0x0838 0x4 0x2
+#define MX6SX_PAD_SD1_DATA0__UART2_TX 0x0228 0x0570 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x0228 0x0570 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN 0x0228 0x0570 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA0__CCM_OUT2 0x0228 0x0570 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP 0x0228 0x0570 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48 0x0228 0x0570 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1 0x022C 0x0574 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x022C 0x0574 0x066C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x022C 0x0574 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2 0x022C 0x0574 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_RX 0x022C 0x0574 0x0838 0x4 0x3
+#define MX6SX_PAD_SD1_DATA1__UART2_TX 0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3 0x022C 0x0574 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT 0x022C 0x0574 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2 0x022C 0x0574 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN 0x022C 0x0574 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47 0x022C 0x0574 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2 0x0230 0x0578 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1
+#define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2
+#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N 0x0230 0x0578 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3 0x0234 0x057C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x0234 0x057C 0x0660 0x1 0x1
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD 0x0234 0x057C 0x065C 0x2 0x2
+#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3 0x0234 0x057C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B 0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0x0234 0x057C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1 0x0234 0x057C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY 0x0234 0x057C 0x069C 0x7 0x2
+#define MX6SX_PAD_SD1_DATA3__VADC_RST_N 0x0234 0x057C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x0238 0x0580 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS 0x0238 0x0580 0x0680 0x1 0x2
+#define MX6SX_PAD_SD2_CLK__KPP_COL_5 0x0238 0x0580 0x07C8 0x2 0x1
+#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK 0x0238 0x0580 0x0740 0x3 0x1
+#define MX6SX_PAD_SD2_CLK__MLB_SIG 0x0238 0x0580 0x07F0 0x4 0x2
+#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6 0x0238 0x0580 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x0238 0x0580 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY 0x0238 0x0580 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5 0x0238 0x0580 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29 0x0238 0x0580 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x023C 0x0584 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC 0x023C 0x0584 0x067C 0x1 0x2
+#define MX6SX_PAD_SD2_CMD__KPP_ROW_5 0x023C 0x0584 0x07D4 0x2 0x1
+#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI 0x023C 0x0584 0x0748 0x3 0x1
+#define MX6SX_PAD_SD2_CMD__MLB_CLK 0x023C 0x0584 0x07E8 0x4 0x2
+#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7 0x023C 0x0584 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CMD__MQS_LEFT 0x023C 0x0584 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B 0x023C 0x0584 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4 0x023C 0x0584 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30 0x023C 0x0584 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x0240 0x0588 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD 0x0240 0x0588 0x0674 0x1 0x2
+#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7 0x0240 0x0588 0x07DC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA0__PWM1_OUT 0x0240 0x0588 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA0__I2C4_SDA 0x0240 0x0588 0x07C4 0x4 0x3
+#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8 0x0240 0x0588 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3 0x0240 0x0588 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA0__UART4_RX 0x0240 0x0588 0x0848 0x7 0x4
+#define MX6SX_PAD_SD2_DATA0__UART4_TX 0x0240 0x0588 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0 0x0240 0x0588 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50 0x0240 0x0588 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x0244 0x058C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC 0x0244 0x058C 0x0684 0x1 0x2
+#define MX6SX_PAD_SD2_DATA1__KPP_COL_7 0x0244 0x058C 0x07D0 0x2 0x1
+#define MX6SX_PAD_SD2_DATA1__PWM2_OUT 0x0244 0x058C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA1__I2C4_SCL 0x0244 0x058C 0x07C0 0x4 0x3
+#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9 0x0244 0x058C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2 0x0244 0x058C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_RX 0x0244 0x058C 0x0848 0x7 0x5
+#define MX6SX_PAD_SD2_DATA1__UART4_TX 0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1 0x0244 0x058C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49 0x0244 0x058C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x0248 0x0590 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS 0x0248 0x0590 0x0688 0x1 0x2
+#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6 0x0248 0x0590 0x07D8 0x2 0x1
+#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0 0x0248 0x0590 0x074C 0x3 0x1
+#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0 0x0248 0x0590 0x081C 0x4 0x2
+#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10 0x0248 0x0590 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT 0x0248 0x0590 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA2__UART6_RX 0x0248 0x0590 0x0858 0x7 0x4
+#define MX6SX_PAD_SD2_DATA2__UART6_TX 0x0248 0x0590 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2 0x0248 0x0590 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32 0x0248 0x0590 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x024C 0x0594 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD 0x024C 0x0594 0x0678 0x1 0x2
+#define MX6SX_PAD_SD2_DATA3__KPP_COL_6 0x024C 0x0594 0x07CC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO 0x024C 0x0594 0x0744 0x3 0x1
+#define MX6SX_PAD_SD2_DATA3__MLB_DATA 0x024C 0x0594 0x07EC 0x4 0x2
+#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11 0x024C 0x0594 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA3__SPDIF_IN 0x024C 0x0594 0x0824 0x6 0x4
+#define MX6SX_PAD_SD2_DATA3__UART6_RX 0x024C 0x0594 0x0858 0x7 0x5
+#define MX6SX_PAD_SD2_DATA3__UART6_TX 0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0
+#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0 0x0250 0x0598 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY 0x0250 0x0598 0x07E4 0x6 0x0
+#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29 0x0250 0x0598 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5 0x0250 0x0598 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x0254 0x059C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_RX 0x0254 0x059C 0x0848 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_TX 0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x0254 0x059C 0x0748 0x2 0x0
+#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC 0x0254 0x059C 0x067C 0x3 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC 0x0254 0x059C 0x07E4 0x4 0x1
+#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1 0x0254 0x059C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_RS 0x0254 0x059C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28 0x0254 0x059C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4 0x0254 0x059C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x0258 0x05A0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA0__I2C4_SCL 0x0258 0x05A0 0x07C0 0x1 0x0
+#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1 0x0258 0x05A0 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD 0x0258 0x05A0 0x0674 0x3 0x0
+#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1 0x0258 0x05A0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2 0x0258 0x05A0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT 0x0258 0x05A0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30 0x0258 0x05A0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0 0x0258 0x05A0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0 0x0258 0x05A0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x025C 0x05A4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA1__I2C4_SDA 0x025C 0x05A4 0x07C4 0x1 0x0
+#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2 0x025C 0x05A4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC 0x025C 0x05A4 0x0684 0x3 0x0
+#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0 0x025C 0x05A4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3 0x025C 0x05A4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT 0x025C 0x05A4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31 0x025C 0x05A4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1 0x025C 0x05A4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1 0x025C 0x05A4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x0260 0x05A8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B 0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0 0x0260 0x05A8 0x074C 0x2 0x0
+#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS 0x0260 0x05A8 0x0688 0x3 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK 0x0260 0x05A8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x0260 0x05A8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN 0x0260 0x05A8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26 0x0260 0x05A8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2 0x0260 0x05A8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2 0x0260 0x05A8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x0264 0x05AC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA3__UART4_RX 0x0264 0x05AC 0x0848 0x1 0x1
+#define MX6SX_PAD_SD3_DATA3__UART4_TX 0x0264 0x05AC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x0264 0x05AC 0x0744 0x2 0x0
+#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD 0x0264 0x05AC 0x0678 0x3 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE 0x0264 0x05AC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5 0x0264 0x05AC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E 0x0264 0x05AC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27 0x0264 0x05AC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3 0x0264 0x05AC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3 0x0264 0x05AC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x0268 0x05B0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA4__CAN2_RX 0x0268 0x05B0 0x0690 0x1 0x0
+#define MX6SX_PAD_SD3_DATA4__CANFD_RX2 0x0268 0x05B0 0x0698 0x2 0x0
+#define MX6SX_PAD_SD3_DATA4__UART3_RX 0x0268 0x05B0 0x0840 0x3 0x2
+#define MX6SX_PAD_SD3_DATA4__UART3_TX 0x0268 0x05B0 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3 0x0268 0x05B0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x0268 0x05B0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN 0x0268 0x05B0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1 0x0268 0x05B0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4 0x0268 0x05B0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0 0x0268 0x05B0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x026C 0x05B4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA5__CAN1_TX 0x026C 0x05B4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA5__CANFD_TX1 0x026C 0x05B4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_RX 0x026C 0x05B4 0x0840 0x3 0x3
+#define MX6SX_PAD_SD3_DATA5__UART3_TX 0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2 0x026C 0x05B4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x026C 0x05B4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT 0x026C 0x05B4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE 0x026C 0x05B4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5 0x026C 0x05B4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1 0x026C 0x05B4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x0270 0x05B8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA6__CAN2_TX 0x0270 0x05B8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA6__CANFD_TX2 0x0270 0x05B8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4 0x0270 0x05B8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8 0x0270 0x05B8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT 0x0270 0x05B8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0 0x0270 0x05B8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7 0x0270 0x05B8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7 0x0270 0x05B8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0
+#define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3
+#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR 0x0274 0x05BC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6 0x0274 0x05BC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2 0x0274 0x05BC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x0278 0x05C0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15 0x0278 0x05C0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO 0x0278 0x05C0 0x0724 0x2 0x1
+#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS 0x0278 0x05C0 0x0638 0x3 0x0
+#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13 0x0278 0x05C0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12 0x0278 0x05C0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2 0x0278 0x05C0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20 0x0278 0x05C0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12 0x0278 0x05C0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x0278 0x05C0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x027C 0x05C4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14 0x027C 0x05C4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI 0x027C 0x05C4 0x0728 0x2 0x1
+#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC 0x027C 0x05C4 0x0634 0x3 0x0
+#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14 0x027C 0x05C4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13 0x027C 0x05C4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1 0x027C 0x05C4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19 0x027C 0x05C4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11 0x027C 0x05C4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN 0x027C 0x05C4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x0280 0x05C8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10 0x0280 0x05C8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0 0x0280 0x05C8 0x072C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD 0x0280 0x05C8 0x062C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12 0x0280 0x05C8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14 0x0280 0x05C8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3 0x0280 0x05C8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21 0x0280 0x05C8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13 0x0280 0x05C8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE 0x0280 0x05C8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x0284 0x05CC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11 0x0284 0x05CC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK 0x0284 0x05CC 0x0720 0x2 0x1
+#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC 0x0284 0x05CC 0x063C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11 0x0284 0x05CC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15 0x0284 0x05CC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY 0x0284 0x05CC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22 0x0284 0x05CC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14 0x0284 0x05CC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR 0x0284 0x05CC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x0288 0x05D0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12 0x0288 0x05D0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA2__I2C2_SDA 0x0288 0x05D0 0x07B4 0x2 0x0
+#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS 0x0288 0x05D0 0x0640 0x3 0x0
+#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10 0x0288 0x05D0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16 0x0288 0x05D0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3 0x0288 0x05D0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23 0x0288 0x05D0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15 0x0288 0x05D0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB 0x0288 0x05D0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x028C 0x05D4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13 0x028C 0x05D4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA3__I2C2_SCL 0x028C 0x05D4 0x07B0 0x2 0x0
+#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD 0x028C 0x05D4 0x0630 0x3 0x0
+#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9 0x028C 0x05D4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17 0x028C 0x05D4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY 0x028C 0x05D4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24 0x028C 0x05D4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16 0x028C 0x05D4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS 0x028C 0x05D4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x0290 0x05D8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09 0x0290 0x05D8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_RX 0x0290 0x05D8 0x0850 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_TX 0x0290 0x05D8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK 0x0290 0x05D8 0x0730 0x3 0x0
+#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8 0x0290 0x05D8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18 0x0290 0x05D8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x0290 0x05D8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16 0x0290 0x05D8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE 0x0290 0x05D8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE 0x0290 0x05D8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x0294 0x05DC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B 0x0294 0x05DC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_RX 0x0294 0x05DC 0x0850 0x2 0x1
+#define MX6SX_PAD_SD4_DATA5__UART5_TX 0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI 0x0294 0x05DC 0x0738 0x3 0x0
+#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7 0x0294 0x05DC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19 0x0294 0x05DC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA5__SPDIF_IN 0x0294 0x05DC 0x0824 0x6 0x0
+#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17 0x0294 0x05DC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9 0x0294 0x05DC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0 0x0294 0x05DC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x0298 0x05E0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B 0x0298 0x05E0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B 0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO 0x0298 0x05E0 0x0734 0x3 0x0
+#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6 0x0298 0x05E0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x0298 0x05E0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_WP 0x0298 0x05E0 0x0878 0x6 0x0
+#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18 0x0298 0x05E0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10 0x0298 0x05E0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B 0x029C 0x05E4 0x0874 0x6 0x0
+#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15 0x029C 0x05E4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE 0x029C 0x05E4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD 0x029C 0x05E4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x02A0 0x05E8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS 0x02A0 0x05E8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET 0x02A0 0x05E8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK 0x02A0 0x05E8 0x0000 0x3 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET 0x02A0 0x05E8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x02A0 0x05E8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS 0x02A0 0x05E8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25 0x02A0 0x05E8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17 0x02A0 0x05E8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2 0x02A0 0x05E8 0x0000 0x9 0x0
+#define MX6SX_PAD_USB_H_DATA__USB_H_DATA 0x02A4 0x05EC 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_DATA__PWM2_OUT 0x02A4 0x05EC 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT 0x02A4 0x05EC 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x02A4 0x05EC 0x07C4 0x3 0x1
+#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B 0x02A4 0x05EC 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10 0x02A4 0x05EC 0x0000 0x5 0x0
+#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE 0x02A8 0x05F0 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT 0x02A8 0x05F0 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT 0x02A8 0x05F0 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x02A8 0x05F0 0x07C0 0x3 0x1
+#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB 0x02A8 0x05F0 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11 0x02A8 0x05F0 0x0000 0x5 0x0
+
+#endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
new file mode 100644
index 0000000..a3980d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -0,0 +1,479 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloX SDB Board";
+ compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc_sd3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_sd3>;
+ regulator-name = "VCC_SD3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_psu_5v: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "PSU-5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <6>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks IMX6SX_CLK_AUDIO>;
+ DCVDD-supply = <&vgen4_reg>;
+ DBVDD-supply = <&vgen4_reg>;
+ AVDD-supply = <&vgen4_reg>;
+ CPVDD-supply = <&vgen4_reg>;
+ MICVDD-supply = <&vgen3_reg>;
+ PLLVDD-supply = <&vgen4_reg>;
+ SPKVDD1-supply = <®_psu_5v>;
+ SPKVDD2-supply = <®_psu_5v>;
+ };
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <&vcc_sd3>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6x-sdb {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0
+ MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0
+ MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0
+ MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0
+ MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+ MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
+ MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_vcc_sd3: vccsd3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
+ MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usb_otg2: usbot2ggrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
+ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
new file mode 100644
index 0000000..f4b9da6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -0,0 +1,1208 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sx-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+ aliases {
+ can0 = &flexcan1;
+ can1 = &flexcan2;
+ ethernet0 = &fec1;
+ ethernet1 = &fec2;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ mmc3 = &usdhc4;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
+ spi4 = &ecspi5;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1075000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC uV */
+ 996000 1175000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6SX_CLK_ARM>,
+ <&clks IMX6SX_CLK_PLL2_PFD2>,
+ <&clks IMX6SX_CLK_STEP>,
+ <&clks IMX6SX_CLK_PLL1_SW>,
+ <&clks IMX6SX_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ soc-supply = <®_soc>;
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
+
+ osc: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
+
+ ipp_di0: clock@2 {
+ compatible = "fixed-clock";
+ reg = <2>;
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di0";
+ };
+
+ ipp_di1: clock@3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di1";
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ocram: sram@00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ clocks = <&clks IMX6SX_CLK_OCRAM>;
+ };
+
+ L2: l2-cache@00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <4 2 3>;
+ arm,data-latency = <4 2 3>;
+ };
+
+ dma_apbh: dma-apbh@01804000 {
+ compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x01804000 0x2000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ clocks = <&clks IMX6SX_CLK_APBH_DMA>;
+ };
+
+ gpmi: gpmi-nand@01806000{
+ compatible = "fsl,imx6sx-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bch";
+ clocks = <&clks IMX6SX_CLK_GPMI_IO>,
+ <&clks IMX6SX_CLK_GPMI_APB>,
+ <&clks IMX6SX_CLK_GPMI_BCH>,
+ <&clks IMX6SX_CLK_GPMI_BCH_APB>,
+ <&clks IMX6SX_CLK_PER1_BCH>;
+ clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+ "gpmi_bch_apb", "per1_bch";
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ aips1: aips-bus@02000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif: spdif@02004000 {
+ compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
+ reg = <0x02004000 0x4000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 14 18 0>,
+ <&sdma 15 18 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SX_CLK_SPDIF>,
+ <&clks IMX6SX_CLK_OSC>,
+ <&clks IMX6SX_CLK_SPDIF>,
+ <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks IMX6SX_CLK_IPG>,
+ <&clks 0>, <&clks 0>,
+ <&clks IMX6SX_CLK_SPBA>;
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "dma";
+ status = "disabled";
+ };
+
+ ecspi1: ecspi@02008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI1>,
+ <&clks IMX6SX_CLK_ECSPI1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@0200c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI2>,
+ <&clks IMX6SX_CLK_ECSPI2>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi@02010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI3>,
+ <&clks IMX6SX_CLK_ECSPI3>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi@02014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI4>,
+ <&clks IMX6SX_CLK_ECSPI4>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@02020000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ esai: esai@02024000 {
+ reg = <0x02024000 0x4000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
+ <&clks IMX6SX_CLK_ESAI_MEM>,
+ <&clks IMX6SX_CLK_ESAI_EXTAL>,
+ <&clks IMX6SX_CLK_ESAI_IPG>,
+ <&clks IMX6SX_CLK_SPBA>;
+ clock-names = "core", "mem", "extal",
+ "fsys", "dma";
+ status = "disabled";
+ };
+
+ ssi1: ssi@02028000 {
+ compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+ reg = <0x02028000 0x4000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
+ <&clks IMX6SX_CLK_SSI1>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@0202c000 {
+ compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+ reg = <0x0202c000 0x4000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
+ <&clks IMX6SX_CLK_SSI2>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@02030000 {
+ compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+ reg = <0x02030000 0x4000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
+ <&clks IMX6SX_CLK_SSI3>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ asrc: asrc@02034000 {
+ reg = <0x02034000 0x4000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
+ <&clks IMX6SX_CLK_ASRC_IPG>,
+ <&clks IMX6SX_CLK_SPDIF>,
+ <&clks IMX6SX_CLK_SPBA>;
+ clock-names = "mem", "ipg", "asrck", "dma";
+ dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
+ <&sdma 19 20 1>, <&sdma 20 20 1>,
+ <&sdma 21 20 1>, <&sdma 22 20 1>;
+ dma-names = "rxa", "rxb", "rxc",
+ "txa", "txb", "txc";
+ status = "okay";
+ };
+ };
+
+ pwm1: pwm@02080000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x02080000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM1>,
+ <&clks IMX6SX_CLK_PWM1>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm2: pwm@02084000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x02084000 0x4000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM2>,
+ <&clks IMX6SX_CLK_PWM2>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm3: pwm@02088000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x02088000 0x4000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM3>,
+ <&clks IMX6SX_CLK_PWM3>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm4: pwm@0208c000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x0208c000 0x4000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM4>,
+ <&clks IMX6SX_CLK_PWM4>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ flexcan1: can@02090000 {
+ compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
+ <&clks IMX6SX_CLK_CAN1_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ flexcan2: can@02094000 {
+ compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x02094000 0x4000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
+ <&clks IMX6SX_CLK_CAN2_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt: gpt@02098000 {
+ compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_GPT_BUS>,
+ <&clks IMX6SX_CLK_GPT_SERIAL>;
+ clock-names = "ipg", "per";
+ };
+
+ gpio1: gpio@0209c000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@020a0000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@020a4000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@020a8000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@020ac000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@020b0000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020b0000 0x4000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio@020b4000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ kpp: kpp@020b8000 {
+ compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
+ reg = <0x020b8000 0x4000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ wdog1: wdog@020bc000 {
+ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DUMMY>;
+ };
+
+ wdog2: wdog@020c0000 {
+ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ clks: ccm@020c4000 {
+ compatible = "fsl,imx6sx-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
+
+ anatop: anatop@020c8000 {
+ compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ regulator-1p1@110 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x110>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <4>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1375000>;
+ };
+
+ regulator-3p0@120 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ };
+
+ regulator-2p5@130 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2875000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x130>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2100000>;
+ anatop-max-voltage = <2875000>;
+ };
+
+ reg_arm: regulator-vddcore@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddarm";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <0>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_pcie: regulator-vddpcie@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddpcie";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <9>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <26>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_soc: regulator-vddsoc@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <18>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <28>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+ };
+
+ tempmon: tempmon {
+ compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ fsl,tempmon-data = <&ocotp>;
+ clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+ };
+
+ usbphy1: usbphy@020c9000 {
+ compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBPHY1>;
+ fsl,anatop = <&anatop>;
+ };
+
+ usbphy2: usbphy@020ca000 {
+ compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020ca000 0x1000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBPHY2>;
+ fsl,anatop = <&anatop>;
+ };
+
+ snvs: snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+
+ snvs-rtc-lp@34 {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ reg = <0x34 0x58>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ epit1: epit@020d0000 {
+ reg = <0x020d0000 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ epit2: epit@020d4000 {
+ reg = <0x020d4000 0x4000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ src: src@020d8000 {
+ compatible = "fsl,imx6sx-src", "fsl,imx51-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ iomuxc: iomuxc@020e0000 {
+ compatible = "fsl,imx6sx-iomuxc";
+ reg = <0x020e0000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@020e4000 {
+ compatible = "fsl,imx6sx-iomuxc-gpr",
+ "fsl,imx6q-iomuxc-gpr", "syscon";
+ reg = <0x020e4000 0x4000>;
+ };
+
+ sdma: sdma@020ec000 {
+ compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SDMA>,
+ <&clks IMX6SX_CLK_SDMA>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ /* imx6sx reuses imx6q sdma firmware */
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+ };
+ };
+
+ aips2: aips-bus@02100000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ usbotg1: usb@02184000 {
+ compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,anatop = <&anatop>;
+ status = "disabled";
+ };
+
+ usbotg2: usb@02184200 {
+ compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+ reg = <0x02184200 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbh: usb@02184400 {
+ compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+ reg = <0x02184400 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBOH3>;
+ fsl,usbmisc = <&usbmisc 2>;
+ phy_type = "hsic";
+ fsl,anatop = <&anatop>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x02184800 0x200>;
+ clocks = <&clks IMX6SX_CLK_USBOH3>;
+ };
+
+ fec1: ethernet@02188000 {
+ compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ENET>,
+ <&clks IMX6SX_CLK_ENET_AHB>,
+ <&clks IMX6SX_CLK_ENET_PTP>,
+ <&clks IMX6SX_CLK_ENET_REF>,
+ <&clks IMX6SX_CLK_ENET_PTP>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ status = "disabled";
+ };
+
+ mlb: mlb@0218c000 {
+ reg = <0x0218c000 0x4000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_MLB>;
+ status = "disabled";
+ };
+
+ usdhc1: usdhc@02190000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USDHC1>,
+ <&clks IMX6SX_CLK_USDHC1>,
+ <&clks IMX6SX_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@02194000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USDHC2>,
+ <&clks IMX6SX_CLK_USDHC2>,
+ <&clks IMX6SX_CLK_USDHC2>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@02198000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USDHC3>,
+ <&clks IMX6SX_CLK_USDHC3>,
+ <&clks IMX6SX_CLK_USDHC3>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc4: usdhc@0219c000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USDHC4>,
+ <&clks IMX6SX_CLK_USDHC4>,
+ <&clks IMX6SX_CLK_USDHC4>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@021a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@021a4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@021a8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ mmdc: mmdc@021b0000 {
+ compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ fec2: ethernet@021b4000 {
+ compatible = "fsl,imx6sx-fec";
+ reg = <0x021b4000 0x4000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ENET>,
+ <&clks IMX6SX_CLK_ENET_AHB>,
+ <&clks IMX6SX_CLK_ENET_PTP>,
+ <&clks IMX6SX_CLK_ENET2_REF_125M>,
+ <&clks IMX6SX_CLK_ENET_PTP>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ status = "disabled";
+ };
+
+ weim: weim@021b8000 {
+ compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+ };
+
+ ocotp: ocotp@021bc000 {
+ compatible = "fsl,imx6sx-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SX_CLK_OCOTP>;
+ };
+
+ sai1: sai@021d4000 {
+ compatible = "fsl,imx6sx-sai";
+ reg = <0x021d4000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
+ <&clks IMX6SX_CLK_SAI1>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 31 23 0>, <&sdma 32 23 0>;
+ dma-source = <&gpr 0 15 0 16>;
+ status = "disabled";
+ };
+
+ audmux: audmux@021d8000 {
+ compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ status = "disabled";
+ };
+
+ sai2: sai@021dc000 {
+ compatible = "fsl,imx6sx-sai";
+ reg = <0x021dc000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
+ <&clks IMX6SX_CLK_SAI2>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 33 23 0>, <&sdma 34 23 0>;
+ dma-source = <&gpr 0 17 0 18>;
+ status = "disabled";
+ };
+
+ qspi1: qspi@021e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-qspi";
+ reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_QSPI1>,
+ <&clks IMX6SX_CLK_QSPI1>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ qspi2: qspi@021e4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-qspi";
+ reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_QSPI2>,
+ <&clks IMX6SX_CLK_QSPI2>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ uart2: serial@021e8000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial@021ec000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart4: serial@021f0000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart5: serial@021f4000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c4: i2c@021f8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021f8000 0x4000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_I2C4>;
+ status = "disabled";
+ };
+ };
+
+ aips3: aips-bus@02200000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02200000 0x100000>;
+ ranges;
+
+ spba-bus@02200000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02240000 0x40000>;
+ ranges;
+
+ csi1: csi@02214000 {
+ reg = <0x02214000 0x4000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+ <&clks IMX6SX_CLK_CSI>,
+ <&clks IMX6SX_CLK_DCIC1>;
+ clock-names = "disp-axi", "csi_mclk", "dcic";
+ status = "disabled";
+ };
+
+ pxp: pxp@02218000 {
+ reg = <0x02218000 0x4000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PXP_AXI>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pxp-axi", "disp-axi";
+ status = "disabled";
+ };
+
+ csi2: csi@0221c000 {
+ reg = <0x0221c000 0x4000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+ <&clks IMX6SX_CLK_CSI>,
+ <&clks IMX6SX_CLK_DCIC2>;
+ clock-names = "disp-axi", "csi_mclk", "dcic";
+ status = "disabled";
+ };
+
+ lcdif1: lcdif@02220000 {
+ reg = <0x02220000 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+ <&clks IMX6SX_CLK_LCDIF_APB>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
+ lcdif2: lcdif@02224000 {
+ reg = <0x02224000 0x4000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
+ <&clks IMX6SX_CLK_LCDIF_APB>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
+ vadc: vadc@02228000 {
+ reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
+ reg-names = "vadc-vafe", "vadc-vdec";
+ clocks = <&clks IMX6SX_CLK_VADC>,
+ <&clks IMX6SX_CLK_CSI>;
+ clock-names = "vadc", "csi";
+ status = "disabled";
+ };
+ };
+
+ adc1: adc@02280000 {
+ compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+ reg = <0x02280000 0x4000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ adc2: adc@02284000 {
+ compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+ reg = <0x02284000 0x4000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ wdog3: wdog@02288000 {
+ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+ reg = <0x02288000 0x4000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ ecspi5: ecspi@0228c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0228c000 0x4000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI5>,
+ <&clks IMX6SX_CLK_ECSPI5>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart6: serial@022a0000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x022a0000 0x4000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ pwm5: pwm@022a4000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x022a4000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM5>,
+ <&clks IMX6SX_CLK_PWM5>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm6: pwm@022a8000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x022a8000 0x4000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM6>,
+ <&clks IMX6SX_CLK_PWM6>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm7: pwm@022ac000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x022ac000 0x4000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM7>,
+ <&clks IMX6SX_CLK_PWM7>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm8: pwm@0022b0000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x0022b0000 0x4000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM8>,
+ <&clks IMX6SX_CLK_PWM8>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+ };
+
+ pcie: pcie@0x08000000 {
+ compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+ reg = <0x08ffc000 0x4000>; /* DBI */
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ /* configuration space */
+ ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
+ /* downstream I/O */
+ 0x81000000 0 0 0x08f80000 0 0x00010000
+ /* non-prefetchable memory */
+ 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
+ <&clks IMX6SX_CLK_PCIE_AXI>,
+ <&clks IMX6SX_CLK_LVDS1_OUT>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pcie_ref_125m", "pcie_axi",
+ "lvds_gate", "display_axi";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi
index 90774d6..598afe9 100644
--- a/arch/arm/boot/dts/k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/k2e-clocks.dtsi
@@ -22,7 +22,7 @@
#clock-cells = <0>;
compatible = "ti,keystone,pll-clock";
clocks = <&refclkpass>;
- clock-output-names = "pa-pll-clk";
+ clock-output-names = "papllclk";
reg = <0x02620358 4>;
reg-names = "control";
};
diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi
index 96e6536..d5adee3 100644
--- a/arch/arm/boot/dts/k2hk-clocks.dtsi
+++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
@@ -31,7 +31,7 @@
#clock-cells = <0>;
compatible = "ti,keystone,pll-clock";
clocks = <&refclkpass>;
- clock-output-names = "pa-pll-clk";
+ clock-output-names = "papllclk";
reg = <0x02620358 4>;
reg-names = "control";
};
diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts
index 1f90cbf..3223cc1 100644
--- a/arch/arm/boot/dts/k2hk-evm.dts
+++ b/arch/arm/boot/dts/k2hk-evm.dts
@@ -167,3 +167,15 @@
};
};
};
+
+&mdio {
+ ethphy0: ethernet-phy@0 {
+ compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi
index f584b80..eb1e3e2 100644
--- a/arch/arm/boot/dts/k2l-clocks.dtsi
+++ b/arch/arm/boot/dts/k2l-clocks.dtsi
@@ -31,7 +31,7 @@
#clock-cells = <0>;
compatible = "ti,keystone,pll-clock";
clocks = <&refclksys>;
- clock-output-names = "pa-pll-clk";
+ clock-output-names = "papllclk";
reg = <0x02620358 4>;
reg-names = "control";
};
diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
index 93f82c7..0c334b2 100644
--- a/arch/arm/boot/dts/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/keystone-clocks.dtsi
@@ -215,7 +215,7 @@
clkpa: clkpa {
#clock-cells = <0>;
compatible = "ti,keystone,psc-clock";
- clocks = <&chipclk16>;
+ clocks = <&paclk13>;
clock-output-names = "pa";
reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
reg-names = "control", "domain";
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index c1414cb..9e31fe7 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -266,5 +266,16 @@
ranges = <0 0 0x30000000 0x10000000
1 0 0x21000A00 0x00000100>;
};
+
+ mdio: mdio@02090300 {
+ compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02090300 0x100>;
+ status = "disabled";
+ clocks = <&clkpa>;
+ clock-names = "fck";
+ bus_freq = <2500000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
new file mode 100644
index 0000000..6b78560
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-d2net.dts
@@ -0,0 +1,42 @@
+/*
+ * Device Tree file for d2 Network v2
+ *
+ * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+ model = "LaCie d2 Network v2";
+ compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ ns2-leds {
+ compatible = "lacie,ns2-leds";
+
+ blue-sata {
+ label = "d2net_v2:blue:sata";
+ slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ red-fail {
+ label = "d2net_v2:red:fail";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts
new file mode 100644
index 0000000..53dc37a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-net2big.dts
@@ -0,0 +1,60 @@
+/*
+ * Device Tree file for LaCie 2Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+ model = "LaCie 2Big Network v2";
+ compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+};
+
+®ulators {
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ clocks {
+ g762_clk: g762-oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
+
+&i2c0 {
+ g762@3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+ clocks = <&g762_clk>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
new file mode 100644
index 0000000..36155b7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -0,0 +1,111 @@
+/*
+ * Device Tree file for LaCie 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+ model = "LaCie 5Big Network v2";
+ compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+};
+
+®ulators {
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "hdd1power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "hdd2power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "hdd3power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "hdd4power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ clocks {
+ g762_clk: g762-oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
+
+&mdio {
+ ethphy1: ethernet-phy@1 {
+ reg = <0>;
+ };
+};
+
+ð1 {
+ status = "okay";
+ ethernet1-port@0 {
+ phy-handle = <ðphy1>;
+ };
+};
+
+
+&i2c0 {
+ g762@3e {
+ compatible = "gmt,g762";
+ reg = <0x3e>;
+ clocks = <&g762_clk>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
new file mode 100644
index 0000000..b0cfb7c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
@@ -0,0 +1,154 @@
+/*
+ * Device Tree common file for LaCie 2Big and 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ ocp@f1000000 {
+ serial@12000 {
+ status = "okay";
+ };
+
+ spi@10600 {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mxicy,mx25l4005a";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition@0 {
+ reg = <0x0 0x80000>;
+ label = "u-boot";
+ };
+ };
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * button@1 and button@2 represent a three position rocker
+ * switch. Thus the conventional KEY_POWER does not fit
+ */
+ button@1 {
+ label = "Back power switch (on|auto)";
+ linux,code = <KEY_ESC>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ button@2 {
+ label = "Back power switch (auto|off)";
+ linux,code = <KEY_1>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+ button@3 {
+ label = "Function button";
+ linux,code = <KEY_OPTION>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ regulators: regulators {
+ status = "okay";
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "hdd0power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <8>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+
+ pmx_button_function: pmx-button-function {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_button_power_off: pmx-button-power-off {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+ pmx_button_power_on: pmx-button-power-on {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c04";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+};
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
index 928f6ee..e83e4f9 100644
--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -30,6 +30,10 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts
index ccf9ea2..f0f5e10 100644
--- a/arch/arm/boot/dts/mpa1600.dts
+++ b/arch/arm/boot/dts/mpa1600.dts
@@ -25,6 +25,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <18432000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index e83b046..2ad3e3b 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -182,3 +182,6 @@
&i2c2 {
compatible = "ti,omap2420-i2c";
};
+
+/include/ "omap24xx-clocks.dtsi"
+/include/ "omap2420-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index c4e8013..f9ab99d 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -288,3 +288,6 @@
&i2c2 {
compatible = "ti,omap2430-i2c";
};
+
+/include/ "omap24xx-clocks.dtsi"
+/include/ "omap2430-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 1e1b057..159720d 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -100,15 +100,33 @@
};
};
};
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "omap5-uevm";
+
+ ti,mclk-freq = <19200000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
};
&omap5_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
- &twl6040_pins
- &mcpdm_pins
- &mcbsp1_pins
- &mcbsp2_pins
&usbhost_pins
&led_gpio_pins
>;
@@ -306,6 +324,11 @@
ti,wakeup;
};
+ clk32kgaudio: palmas_clk32k@1 {
+ compatible = "ti,palmas-clk32kgaudio";
+ #clock-cells = <0>;
+ };
+
palmas_pmic {
compatible = "ti,palmas-pmic";
interrupt-parent = <&palmas>;
@@ -489,6 +512,25 @@
};
};
};
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&twl6040_pins>;
+
+ interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
+
+ vio-supply = <&smps7_reg>;
+ v2v1-supply = <&smps9_reg>;
+ enable-active-high;
+
+ clocks = <&clk32kgaudio>;
+ clock-names = "clk32k";
+ };
};
&i2c5 {
@@ -505,8 +547,22 @@
};
};
-&mcbsp3 {
- status = "disabled";
+&mcpdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcpdm_pins>;
+ status = "okay";
+};
+
+&mcbsp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+ status = "okay";
+};
+
+&mcbsp2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+ status = "okay";
};
&usbhshost {
diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts
index 33ffabe..66afcff 100644
--- a/arch/arm/boot/dts/pm9g45.dts
+++ b/arch/arm/boot/dts/pm9g45.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 56849b5..2070546 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -57,3 +57,13 @@
&scif2 {
status = "okay";
};
+
+&spi4 {
+ status = "okay";
+
+ codec: codec@0 {
+ compatible = "wlf,wm8978";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
index 70b1fff..a860f32 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts
@@ -16,6 +16,10 @@
model = "APE6EVM";
compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
+ aliases {
+ serial0 = &scifa0;
+ };
+
chosen {
bootargs = "console=ttySC0,115200 ignore_loglevel rw";
};
@@ -90,9 +94,6 @@
};
&pfc {
- pinctrl-0 = <&scifa0_pins>;
- pinctrl-names = "default";
-
scifa0_pins: serial0 {
renesas,groups = "scifa0_data";
renesas,function = "scifa0";
@@ -123,6 +124,13 @@
status = "okay";
};
+&scifa0 {
+ pinctrl-0 = <&scifa0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&sdhi0 {
vmmc-supply = <&vcc_sdhi0>;
bus-width = <4>;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 82c5ac8..d8ec505 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -252,6 +252,48 @@
status = "disabled";
};
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
+ reg = <0 0xe6c40000 0 0x100>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
+ reg = <0 0xe6c50000 0 0x100>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifb2: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+ reg = <0 0xe6c20000 0 0x100>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifb3: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+ reg = <0 0xe6c30000 0 0x100>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifb4: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 0x100>;
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifb5: serial@e6cf0000 {
+ compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+ reg = <0 0xe6cf0000 0 0x100>;
+ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
mmcif0: mmc@ee200000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 486007d..ee9e7d5 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -19,8 +19,12 @@
model = "armadillo 800 eva reference";
compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
+ aliases {
+ serial1 = &scifa1;
+ };
+
chosen {
- bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
};
memory {
@@ -104,17 +108,21 @@
leds {
compatible = "gpio-leds";
- led1 {
- gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
- };
- led2 {
- gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
- };
led3 {
- gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+ label = "LED3";
};
led4 {
+ gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+ label = "LED4";
+ };
+ led5 {
+ gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ label = "LED5";
+ };
+ led6 {
gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+ label = "LED6";
};
};
@@ -198,9 +206,6 @@
};
&pfc {
- pinctrl-0 = <&scifa1_pins>;
- pinctrl-names = "default";
-
ether_pins: ether {
renesas,groups = "gether_mii", "gether_int";
renesas,function = "gether";
@@ -252,6 +257,13 @@
status = "okay";
};
+&scifa1 {
+ pinctrl-0 = <&scifa1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 55d29f4..bda18fb 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -156,6 +156,69 @@
status = "disabled";
};
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+ reg = <0xe6c40000 0x100>;
+ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+ reg = <0xe6c50000 0x100>;
+ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+ reg = <0xe6c60000 0x100>;
+ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+ reg = <0xe6c70000 0x100>;
+ interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c80000 {
+ compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+ reg = <0xe6c80000 0x100>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa5: serial@e6cb0000 {
+ compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+ reg = <0xe6cb0000 0x100>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa6: serial@e6cc0000 {
+ compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+ reg = <0xe6cc0000 0x100>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa7: serial@e6cd0000 {
+ compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+ reg = <0xe6cd0000 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifb8: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+ reg = <0xe6c30000 0x100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
pfc: pfc@e6050000 {
compatible = "renesas,pfc-r8a7740";
reg = <0xe6050000 0x8000>,
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
index f76f6ec..3342c74 100644
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -23,6 +23,10 @@
model = "bockw";
compatible = "renesas,bockw-reference", "renesas,r8a7778";
+ aliases {
+ serial0 = &scif0;
+ };
+
chosen {
bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
};
@@ -70,9 +74,6 @@
};
&pfc {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
scif0_pins: serial0 {
renesas,groups = "scif0_data_a", "scif0_ctrl";
renesas,function = "scif0";
@@ -124,3 +125,10 @@
};
};
};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 3af0a21..ecfdf4b 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -156,6 +156,48 @@
status = "disabled";
};
+ scif0: serial@ffe40000 {
+ compatible = "renesas,scif-r8a7778", "renesas,scif";
+ reg = <0xffe40000 0x100>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scif1: serial@ffe41000 {
+ compatible = "renesas,scif-r8a7778", "renesas,scif";
+ reg = <0xffe41000 0x100>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scif2: serial@ffe42000 {
+ compatible = "renesas,scif-r8a7778", "renesas,scif";
+ reg = <0xffe42000 0x100>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scif3: serial@ffe43000 {
+ compatible = "renesas,scif-r8a7778", "renesas,scif";
+ reg = <0xffe43000 0x100>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scif4: serial@ffe44000 {
+ compatible = "renesas,scif-r8a7778", "renesas,scif";
+ reg = <0xffe44000 0x100>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scif5: serial@ffe45000 {
+ compatible = "renesas,scif-r8a7778", "renesas,scif";
+ reg = <0xffe45000 0x100>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
mmcif: mmc@ffe4e000 {
compatible = "renesas,sh-mmcif";
reg = <0xffe4e000 0x100>;
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index a7af2c2..ee23388 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -17,7 +17,7 @@
compatible = "renesas,marzen", "renesas,r8a7779";
chosen {
- bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
+ bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
};
memory {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index b517c8e..13bf08a 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -49,13 +49,13 @@
spi2 = &hspi2;
};
- gic: interrupt-controller@f0001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0xf0001000 0x1000>,
- <0xf0000100 0x100>;
- };
+ gic: interrupt-controller@f0001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xf0001000 0x1000>,
+ <0xf0000100 0x100>;
+ };
gpio0: gpio@ffc40000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index dd2fe46..856b423 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -29,12 +29,12 @@
memory@40000000 {
device_type = "memory";
- reg = <0 0x40000000 0 0x80000000>;
+ reg = <0 0x40000000 0 0x40000000>;
};
memory@180000000 {
device_type = "memory";
- reg = <1 0x80000000 0 0x80000000>;
+ reg = <1 0x40000000 0 0xc0000000>;
};
lbsc {
@@ -204,6 +204,36 @@
"msiof1_tx";
renesas,function = "msiof1";
};
+
+ iic1_pins: iic1 {
+ renesas,groups = "iic1";
+ renesas,function = "iic1";
+ };
+
+ iic2_pins: iic2 {
+ renesas,groups = "iic2";
+ renesas,function = "iic2";
+ };
+
+ iic3_pins: iic3 {
+ renesas,groups = "iic3";
+ renesas,function = "iic3";
+ };
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
+
+ usb2_pins: usb2 {
+ renesas,groups = "usb2";
+ renesas,function = "usb2";
+ };
};
ðer {
@@ -317,3 +347,57 @@
cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
status = "okay";
};
+
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+};
+
+&iic0 {
+ status = "ok";
+};
+
+&iic1 {
+ status = "ok";
+ pinctrl-0 = <&iic1_pins>;
+ pinctrl-names = "default";
+};
+
+&iic2 {
+ status = "ok";
+ pinctrl-0 = <&iic2_pins>;
+ pinctrl-names = "default";
+};
+
+&iic3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&iic3_pins>;
+ status = "okay";
+
+ vdd_dvfs: regulator@68 {
+ compatible = "diasemi,da9210";
+ reg = <0x68>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&pci2 {
+ status = "okay";
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 7ff2960..d9ddecb 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -44,6 +44,17 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1300000000>;
+ voltage-tolerance = <1>; /* 1% */
+ clocks = <&cpg_clocks R8A7790_CLK_Z>;
+ clock-latency = <300000>; /* 300 us */
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1400000 1000000>,
+ <1225000 1000000>,
+ <1050000 1000000>,
+ < 875000 1000000>,
+ < 700000 1000000>,
+ < 350000 1000000>;
};
cpu1: cpu@1 {
@@ -476,6 +487,15 @@
clock-output-names = "extal";
};
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "pcie_bus";
+ status = "disabled";
+ };
+
/*
* The external audio clocks are configured as 0 Hz fixed frequency clocks by
* default. Boards that provide audio clocks should override them.
@@ -754,17 +774,17 @@
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
<&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
- <&hp_clk>, <&hp_clk>, <&rclk_clk>;
+ <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
- R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1
+ R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
>;
clock-output-names =
"iic2", "tpu0", "mmcif1", "sdhi3",
"sdhi2", "sdhi1", "sdhi0", "mmcif0",
- "iic0", "iic1", "cmt1";
+ "iic0", "pciec", "iic1", "ssusb", "cmt1";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -824,6 +844,39 @@
"rcan1", "rcan0", "qspi_mod", "iic3",
"i2c3", "i2c2", "i2c1", "i2c0";
};
+ mstp10_clks: mstp10_clks@e6150998 {
+ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+ clocks = <&p_clk>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>,
+ <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>;
+
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7790_CLK_SSI_ALL
+ R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5
+ R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0
+ R8A7790_CLK_SCU_ALL
+ R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0
+ R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5
+ R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0
+ >;
+ clock-output-names =
+ "ssi-all",
+ "ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
+ "ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
+ "scu-all",
+ "scu-dvc1", "scu-dvc0",
+ "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
+ "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
+ };
};
qspi: spi@e6b10000 {
@@ -876,4 +929,152 @@
#size-cells = <0>;
status = "disabled";
};
+
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7790";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci1: pci@ee0b0000 {
+ compatible = "renesas,pci-r8a7790";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ reg = <0 0xee0b0000 0 0xc00>,
+ <0 0xee0a0000 0 0x1100>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci2: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7790";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <2 2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pciec: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a7790";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
+ 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
+ <0 117 IRQ_TYPE_LEVEL_HIGH>,
+ <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ status = "disabled";
+ };
+
+ rcar_sound: rcar_sound@0xec500000 {
+ #sound-dai-cells = <1>;
+ compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
+ interrupt-parent = <&gic>;
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x1280>; /* SSI */
+ clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
+ <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
+ <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
+ <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
+ <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
+ <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
+ <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
+ <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
+ <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
+ <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
+ <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6", "src.5",
+ "src.4", "src.3", "src.2", "src.1", "src.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc@0 { };
+ dvc1: dvc@1 { };
+ };
+
+ rcar_sound,src {
+ src0: src@0 { };
+ src1: src@1 { };
+ src2: src@2 { };
+ src3: src@3 { };
+ src4: src@4 { };
+ src5: src@5 { };
+ src6: src@6 { };
+ src7: src@7 { };
+ src8: src@8 { };
+ src9: src@9 { };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
index cc6d992..3a2ef0a 100644
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -110,6 +110,11 @@
renesas,function = "sdhi2";
};
+ i2c2_pins: i2c2 {
+ renesas,groups = "i2c2";
+ renesas,function = "i2c2";
+ };
+
qspi_pins: spi0 {
renesas,groups = "qspi_ctrl", "qspi_data4";
renesas,function = "qspi";
@@ -120,6 +125,16 @@
"msiof0_tx";
renesas,function = "msiof0";
};
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
&scif0 {
@@ -146,7 +161,7 @@
};
&sata0 {
- status = "okay";
+ status = "okay";
};
&sdhi0 {
@@ -170,6 +185,14 @@
status = "okay";
};
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
@@ -217,3 +240,23 @@
spi-cpha;
};
};
+
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie_bus_clk {
+ status = "okay";
+};
+
+&pciec {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 05d44f9..23486c0 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -215,25 +215,6 @@
clock-frequency = <20000000>;
};
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- eeprom@50 {
- compatible = "renesas,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
-};
-
-&i2c6 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
&pfc {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
@@ -293,6 +274,21 @@
"msiof0_tx";
renesas,function = "msiof0";
};
+
+ i2c6_pins: i2c6 {
+ renesas,groups = "i2c6";
+ renesas,function = "i2c6";
+ };
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
ðer {
@@ -408,3 +404,58 @@
spi-cpha;
};
};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "renesas,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+
+ vdd_dvfs: regulator@68 {
+ compatible = "diasemi,da9210";
+ reg = <0x68>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie_bus_clk {
+ status = "okay";
+};
+
+&pciec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 8d7ffae..6e9a556 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -45,6 +45,17 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1500000000>;
+ voltage-tolerance = <1>; /* 1% */
+ clocks = <&cpg_clocks R8A7791_CLK_Z>;
+ clock-latency = <300000>; /* 300 us */
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
};
cpu1: cpu@1 {
@@ -521,6 +532,38 @@
clock-output-names = "extal";
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+ * default. Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_a";
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_b";
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_c";
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "pcie_bus";
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7791-cpg-clocks",
@@ -743,30 +786,34 @@
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0
R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1
R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
+ R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0
>;
clock-output-names =
"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
- "scifb1", "msiof1", "scifb2";
+ "scifb1", "msiof1", "scifb2",
+ "sys-dmac1", "sys-dmac0";
};
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
- <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>;
+ <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
- R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1
+ R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1
+ R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
>;
clock-output-names =
"tpu0", "sdhi2", "sdhi1", "sdhi0",
- "mmcif0", "i2c7", "i2c8", "cmt1";
+ "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -828,6 +875,39 @@
"rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2",
"i2c1", "i2c0";
};
+ mstp10_clks: mstp10_clks@e6150998 {
+ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+ clocks = <&p_clk>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>,
+ <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>;
+
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7791_CLK_SSI_ALL
+ R8A7791_CLK_SSI9 R8A7791_CLK_SSI8 R8A7791_CLK_SSI7 R8A7791_CLK_SSI6 R8A7791_CLK_SSI5
+ R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0
+ R8A7791_CLK_SCU_ALL
+ R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0
+ R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5
+ R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0
+ >;
+ clock-output-names =
+ "ssi-all",
+ "ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
+ "ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
+ "scu-all",
+ "scu-dvc1", "scu-dvc0",
+ "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
+ "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
+ };
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
@@ -880,4 +960,132 @@
#size-cells = <0>;
status = "disabled";
};
+
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7791";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci1: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7791";
+ device_type = "pci";
+ clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pciec: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a7791";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
+ 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
+ <0 117 IRQ_TYPE_LEVEL_HIGH>,
+ <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ status = "disabled";
+ };
+
+ rcar_sound: rcar_sound@0xec500000 {
+ #sound-dai-cells = <1>;
+ compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
+ interrupt-parent = <&gic>;
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x1280>; /* SSI */
+ clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>,
+ <&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>,
+ <&mstp10_clks R8A7791_CLK_SSI5>, <&mstp10_clks R8A7791_CLK_SSI4>,
+ <&mstp10_clks R8A7791_CLK_SSI3>, <&mstp10_clks R8A7791_CLK_SSI2>,
+ <&mstp10_clks R8A7791_CLK_SSI1>, <&mstp10_clks R8A7791_CLK_SSI0>,
+ <&mstp10_clks R8A7791_CLK_SCU_SRC9>, <&mstp10_clks R8A7791_CLK_SCU_SRC8>,
+ <&mstp10_clks R8A7791_CLK_SCU_SRC7>, <&mstp10_clks R8A7791_CLK_SCU_SRC6>,
+ <&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>,
+ <&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>,
+ <&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>,
+ <&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6", "src.5",
+ "src.4", "src.3", "src.2", "src.1", "src.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc@0 { };
+ dvc1: dvc@1 { };
+ };
+
+ rcar_sound,src {
+ src0: src@0 { };
+ src1: src@1 { };
+ src2: src@2 { };
+ src3: src@3 { };
+ src4: src@4 { };
+ src5: src@5 { };
+ src6: src@6 { };
+ src7: src@7 { };
+ src8: src@8 { };
+ src9: src@9 { };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index afb3273..8b479f76 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -24,87 +24,167 @@
reg = <0x60000000 0x40000000>;
};
- soc {
- uart0: serial@10124000 {
- status = "okay";
+ vcc_sd0: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "sdmmc-supply";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@0 {
+ gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
};
-
- uart1: serial@10126000 {
- status = "okay";
+ button@1 {
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+ linux,code = <104>;
+ label = "GPIO Key Vol-";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <0>;
+ debounce-interval = <100>;
};
+ /* VOL+ comes somehow thru the ADC */
+ };
+};
- uart2: serial@20064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_xfer>;
- status = "okay";
- };
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
- uart3: serial@20068000 {
- status = "okay";
- };
+ tps: tps@2d {
+ reg = <0x2d>;
- vcc_sd0: fixed-regulator {
- compatible = "regulator-fixed";
- regulator-name = "sdmmc-supply";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
- startup-delay-us = <100000>;
- };
+ interrupt-parent = <&gpio6>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
- dwmmc@10214000 { /* sdmmc */
- num-slots = <1>;
- status = "okay";
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_io>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
- vmmc-supply = <&vcc_sd0>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
+ regulators {
+ vcc_rtc: regulator@0 {
+ regulator-name = "vcc_rtc";
+ regulator-always-on;
};
- };
- dwmmc@10218000 { /* wifi */
- num-slots = <1>;
- status = "okay";
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
+ vcc_io: regulator@1 {
+ regulator-name = "vcc_io";
+ regulator-always-on;
};
- };
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
+ vdd_arm: regulator@2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
- button@0 {
- gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
- linux,code = <116>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- gpio-key,wakeup = <1>;
- debounce-interval = <100>;
+ vcc_ddr: regulator@3 {
+ regulator-name = "vcc_ddr";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
};
- button@1 {
- gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
- linux,code = <104>;
- label = "GPIO Key Vol-";
- linux,input-type = <1>;
- gpio-key,wakeup = <0>;
- debounce-interval = <100>;
+
+ vcc18_cif: regulator@5 {
+ regulator-name = "vcc18_cif";
+ regulator-always-on;
};
- /* VOL+ comes somehow thru the ADC */
+
+ vdd_11: regulator@6 {
+ regulator-name = "vdd_11";
+ regulator-always-on;
+ };
+
+ vcc_25: regulator@7 {
+ regulator-name = "vcc_25";
+ regulator-always-on;
+ };
+
+ vcc_18: regulator@8 {
+ regulator-name = "vcc_18";
+ regulator-always-on;
+ };
+
+ vcc25_hdmi: regulator@9 {
+ regulator-name = "vcc25_hdmi";
+ regulator-always-on;
+ };
+
+ vcca_33: regulator@10 {
+ regulator-name = "vcca_33";
+ regulator-always-on;
+ };
+
+ vcc_tp: regulator@11 {
+ regulator-name = "vcc_tp";
+ regulator-always-on;
+ };
+
+ vcc28_cif: regulator@12 {
+ regulator-name = "vcc28_cif";
+ regulator-always-on;
+ };
};
};
};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
+&mmc0 { /* sdmmc */
+ num-slots = <1>;
+ status = "okay";
+ vmmc-supply = <&vcc_sd0>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+};
+
+&mmc1 { /* wifi */
+ num-slots = <1>;
+ status = "okay";
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3066a-clocks.dtsi b/arch/arm/boot/dts/rk3066a-clocks.dtsi
deleted file mode 100644
index 6e307fc..0000000
--- a/arch/arm/boot/dts/rk3066a-clocks.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/ {
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- compatible = "fixed-clock";
- clock-frequency = <0>;
- #clock-cells = <0>;
- };
-
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
- dummy48m: dummy48m {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
-
- dummy150m: dummy150m {
- compatible = "fixed-clock";
- clock-frequency = <150000000>;
- #clock-cells = <0>;
- };
-
- clk_gates0: gate-clk@200000d0 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000d0 0x4>;
- clocks = <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_core_periph", "gate_cpu_gpll",
- "gate_ddrphy", "gate_aclk_cpu",
- "gate_hclk_cpu", "gate_pclk_cpu",
- "gate_atclk_cpu", "gate_i2s0",
- "gate_i2s0_frac", "gate_i2s1",
- "gate_i2s1_frac", "gate_i2s2",
- "gate_i2s2_frac", "gate_spdif",
- "gate_spdif_frac", "gate_testclk";
-
- #clock-cells = <1>;
- };
-
- clk_gates1: gate-clk@200000d4 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000d4 0x4>;
- clocks = <&xin24m>, <&xin24m>,
- <&xin24m>, <&dummy>,
- <&dummy>, <&xin24m>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>;
-
- clock-output-names =
- "gate_timer0", "gate_timer1",
- "gate_timer2", "gate_jtag",
- "gate_aclk_lcdc1_src", "gate_otgphy0",
- "gate_otgphy1", "gate_ddr_gpll",
- "gate_uart0", "gate_frac_uart0",
- "gate_uart1", "gate_frac_uart1",
- "gate_uart2", "gate_frac_uart2",
- "gate_uart3", "gate_frac_uart3";
-
- #clock-cells = <1>;
- };
-
- clk_gates2: gate-clk@200000d8 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000d8 0x4>;
- clocks = <&clk_gates2 1>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&clk_gates2 3>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy48m>,
- <&dummy>, <&dummy48m>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_periph_src", "gate_aclk_periph",
- "gate_hclk_periph", "gate_pclk_periph",
- "gate_smc", "gate_mac",
- "gate_hsadc", "gate_hsadc_frac",
- "gate_saradc", "gate_spi0",
- "gate_spi1", "gate_mmc0",
- "gate_mac_lbtest", "gate_mmc1",
- "gate_emmc", "gate_tsadc";
-
- #clock-cells = <1>;
- };
-
- clk_gates3: gate-clk@200000dc {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000dc 0x4>;
- clocks = <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
- "gate_dclk_lcdc1", "gate_pclkin_cif0",
- "gate_pclkin_cif1", "reserved",
- "reserved", "gate_cif0_out",
- "gate_cif1_out", "gate_aclk_vepu",
- "gate_hclk_vepu", "gate_aclk_vdpu",
- "gate_hclk_vdpu", "gate_gpu_src",
- "reserved", "gate_xin27m";
-
- #clock-cells = <1>;
- };
-
- clk_gates4: gate-clk@200000e0 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000e0 0x4>;
- clocks = <&clk_gates2 2>, <&clk_gates2 3>,
- <&clk_gates2 1>, <&clk_gates2 1>,
- <&clk_gates2 1>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates2 2>,
- <&clk_gates0 4>, <&clk_gates0 4>,
- <&clk_gates0 3>, <&clk_gates0 3>,
- <&clk_gates0 3>, <&clk_gates2 3>,
- <&clk_gates0 4>;
-
- clock-output-names =
- "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
- "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
- "gate_aclk_pei_niu", "gate_hclk_usb_peri",
- "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
- "gate_hclk_cpubus", "gate_hclk_ahb2apb",
- "gate_aclk_strc_sys", "gate_aclk_l2mem_con",
- "gate_aclk_intmem", "gate_pclk_tsadc",
- "gate_hclk_hdmi";
-
- #clock-cells = <1>;
- };
-
- clk_gates5: gate-clk@200000e4 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000e4 0x4>;
- clocks = <&clk_gates0 3>, <&clk_gates2 1>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates0 4>, <&clk_gates0 5>,
- <&clk_gates2 1>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates4 5>,
- <&clk_gates4 5>, <&dummy>;
-
- clock-output-names =
- "gate_aclk_dmac1", "gate_aclk_dmac2",
- "gate_pclk_efuse", "gate_pclk_tzpc",
- "gate_pclk_grf", "gate_pclk_pmu",
- "gate_hclk_rom", "gate_pclk_ddrupctl",
- "gate_aclk_smc", "gate_hclk_nandc",
- "gate_hclk_mmc0", "gate_hclk_mmc1",
- "gate_hclk_emmc", "gate_hclk_otg0",
- "gate_hclk_otg1", "gate_aclk_gpu";
-
- #clock-cells = <1>;
- };
-
- clk_gates6: gate-clk@200000e8 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000e8 0x4>;
- clocks = <&clk_gates3 0>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&clk_gates1 4>,
- <&clk_gates0 4>, <&clk_gates3 0>,
- <&clk_gates0 4>, <&clk_gates1 4>,
- <&clk_gates3 0>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&clk_gates1 4>,
- <&clk_gates0 4>, <&clk_gates3 0>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_aclk_lcdc0", "gate_hclk_lcdc0",
- "gate_hclk_lcdc1", "gate_aclk_lcdc1",
- "gate_hclk_cif0", "gate_aclk_cif0",
- "gate_hclk_cif1", "gate_aclk_cif1",
- "gate_aclk_ipp", "gate_hclk_ipp",
- "gate_hclk_rga", "gate_aclk_rga",
- "gate_hclk_vio_bus", "gate_aclk_vio0",
- "gate_aclk_vcodec", "gate_shclk_vio_h2h";
-
- #clock-cells = <1>;
- };
-
- clk_gates7: gate-clk@200000ec {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000ec 0x4>;
- clocks = <&clk_gates2 2>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates2 3>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&clk_gates2 3>, <&clk_gates2 3>;
-
- clock-output-names =
- "gate_hclk_emac", "gate_hclk_spdif",
- "gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch",
- "gate_hclk_i2s_8ch", "gate_hclk_hsadc",
- "gate_hclk_pidf", "gate_pclk_timer0",
- "gate_pclk_timer1", "gate_pclk_timer2",
- "gate_pclk_pwm01", "gate_pclk_pwm23",
- "gate_pclk_spi0", "gate_pclk_spi1",
- "gate_pclk_saradc", "gate_pclk_wdt";
-
- #clock-cells = <1>;
- };
-
- clk_gates8: gate-clk@200000f0 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000f0 0x4>;
- clocks = <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&clk_gates2 3>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&dummy>, <&clk_gates0 5>;
-
- clock-output-names =
- "gate_pclk_uart0", "gate_pclk_uart1",
- "gate_pclk_uart2", "gate_pclk_uart3",
- "gate_pclk_i2c0", "gate_pclk_i2c1",
- "gate_pclk_i2c2", "gate_pclk_i2c3",
- "gate_pclk_i2c4", "gate_pclk_gpio0",
- "gate_pclk_gpio1", "gate_pclk_gpio2",
- "gate_pclk_gpio3", "gate_pclk_gpio4",
- "reserved", "gate_pclk_gpio6";
-
- #clock-cells = <1>;
- };
-
- clk_gates9: gate-clk@200000f4 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000f4 0x4>;
- clocks = <&dummy>, <&clk_gates0 5>,
- <&dummy>, <&dummy>,
- <&dummy>, <&clk_gates1 4>,
- <&clk_gates0 5>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>;
-
- clock-output-names =
- "gate_clk_core_dbg", "gate_pclk_dbg",
- "gate_clk_trace", "gate_atclk",
- "gate_clk_l2c", "gate_aclk_vio1",
- "gate_pclk_publ", "gate_aclk_intmem0",
- "gate_aclk_intmem1", "gate_aclk_intmem2",
- "gate_aclk_intmem3";
-
- #clock-cells = <1>;
- };
- };
-
-};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 4387cfd..9c34da4 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -15,8 +15,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3066a-cru.h>
#include "rk3xxx.dtsi"
-#include "rk3066a-clocks.dtsi"
/ {
compatible = "rockchip,rk3066a";
@@ -40,247 +40,388 @@
};
};
- soc {
- timer@20038000 {
- compatible = "snps,dw-apb-timer-osc";
- reg = <0x20038000 0x100>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates1 0>, <&clk_gates7 7>;
- clock-names = "timer", "pclk";
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10080000 0x10000>;
+
+ smp-sram@0 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x0 0x50>;
+ };
+ };
+
+ cru: clock-controller@20000000 {
+ compatible = "rockchip,rk3066a-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ timer@2000e000 {
+ compatible = "snps,dw-apb-timer-osc";
+ reg = <0x2000e000 0x100>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
+ clock-names = "timer", "pclk";
+ };
+
+ timer@20038000 {
+ compatible = "snps,dw-apb-timer-osc";
+ reg = <0x20038000 0x100>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
+ clock-names = "timer", "pclk";
+ };
+
+ timer@2003a000 {
+ compatible = "snps,dw-apb-timer-osc";
+ reg = <0x2003a000 0x100>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
+ clock-names = "timer", "pclk";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3066a-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@20034000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20034000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- timer@2003a000 {
- compatible = "snps,dw-apb-timer-osc";
- reg = <0x2003a000 0x100>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates1 1>, <&clk_gates7 8>;
- clock-names = "timer", "pclk";
+ gpio1: gpio1@2003c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003c000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- timer@2000e000 {
- compatible = "snps,dw-apb-timer-osc";
- reg = <0x2000e000 0x100>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates1 2>, <&clk_gates7 9>;
- clock-names = "timer", "pclk";
+ gpio2: gpio2@2003e000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003e000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- sram: sram@10080000 {
- compatible = "mmio-sram";
- reg = <0x10080000 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x10080000 0x10000>;
+ gpio3: gpio3@20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20080000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
- smp-sram@0 {
- compatible = "rockchip,rk3066-smp-sram";
- reg = <0x0 0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio4@20084000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20084000 0x100>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio6@2000a000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2000a000 0x100>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_default: pcfg_pull_default {
+ bias-pull-pin-default;
+ };
+
+ pcfg_pull_none: pcfg_pull_none {
+ bias-disable;
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>;
};
};
- pinctrl@20008000 {
- compatible = "rockchip,rk3066a-pinctrl";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
- gpio0: gpio0@20034000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x20034000 0x100>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 9>;
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>,
+ <RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ i2c4 {
+ i2c4_xfer: i2c4-xfer {
+ rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_out: pwm0-out {
+ rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_out: pwm1-out {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_out: pwm2-out {
+ rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_out: pwm3-out {
+ rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
};
- gpio1: gpio1@2003c000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003c000 0x100>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 10>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart0_cts: uart0-cts {
+ rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
};
- gpio2: gpio2@2003e000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003e000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 11>;
+ uart0_rts: uart0-rts {
+ rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
};
- gpio3: gpio3@20080000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x20080000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 12>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart1_cts: uart1-cts {
+ rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
};
- gpio4: gpio4@20084000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x20084000 0x100>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 13>;
+ uart1_rts: uart1-rts {
+ rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ /* no rts / cts for uart2 */
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
};
- gpio6: gpio6@2000a000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2000a000 0x100>;
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 15>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart3_cts: uart3-cts {
+ rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
};
- pcfg_pull_default: pcfg_pull_default {
- bias-pull-pin-default;
+ uart3_rts: uart3-rts {
+ rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
+
+ sd0 {
+ sd0_clk: sd0-clk {
+ rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
};
- pcfg_pull_none: pcfg_pull_none {
- bias-disable;
+ sd0_cmd: sd0-cmd {
+ rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
};
- uart0 {
- uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- uart0_cts: uart0-cts {
- rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- uart0_rts: uart0-rts {
- rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd0_cd: sd0-cd {
+ rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
};
- uart1 {
- uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- uart1_cts: uart1-cts {
- rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- uart1_rts: uart1-rts {
- rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd0_wp: sd0-wp {
+ rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
};
- uart2 {
- uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
- };
- /* no rts / cts for uart2 */
+ sd0_bus1: sd0-bus-width1 {
+ rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
};
- uart3 {
- uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd0_bus4: sd0-bus-width4 {
+ rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
- uart3_cts: uart3-cts {
- rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- uart3_rts: uart3-rts {
- rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1 {
+ sd1_clk: sd1-clk {
+ rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
};
- sd0 {
- sd0_clk: sd0-clk {
- rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_cmd: sd0-cmd {
- rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_cd: sd0-cd {
- rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_wp: sd0-wp {
- rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_bus1: sd0-bus-width1 {
- rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd0_bus4: sd0-bus-width4 {
- rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_cmd: sd1-cmd {
+ rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
};
- sd1 {
- sd1_clk: sd1-clk {
- rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_cd: sd1-cd {
+ rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
+ };
- sd1_cmd: sd1-cmd {
- rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_wp: sd1-wp {
+ rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
+ };
- sd1_cd: sd1-cd {
- rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_bus1: sd1-bus-width1 {
+ rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
+ };
- sd1_wp: sd1-wp {
- rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd1_bus1: sd1-bus-width1 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
- };
-
- sd1_bus4: sd1-bus-width4 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
- <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
- };
+ sd1_bus4: sd1-bus-width4 {
+ rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
};
};
};
};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_xfer>;
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_out>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_out>;
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_out>;
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_out>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_xfer>;
+};
diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi
deleted file mode 100644
index b1b92dc..0000000
--- a/arch/arm/boot/dts/rk3188-clocks.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/ {
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- compatible = "fixed-clock";
- clock-frequency = <0>;
- #clock-cells = <0>;
- };
-
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
- dummy48m: dummy48m {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
-
- dummy150m: dummy150m {
- compatible = "fixed-clock";
- clock-frequency = <150000000>;
- #clock-cells = <0>;
- };
-
- clk_gates0: gate-clk@200000d0 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000d0 0x4>;
- clocks = <&dummy150m>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_core_periph", "gate_cpu_gpll",
- "gate_ddrphy", "gate_aclk_cpu",
- "gate_hclk_cpu", "gate_pclk_cpu",
- "gate_atclk_cpu", "gate_aclk_core",
- "reserved", "gate_i2s0",
- "gate_i2s0_frac", "reserved",
- "reserved", "gate_spdif",
- "gate_spdif_frac", "gate_testclk";
-
- #clock-cells = <1>;
- };
-
- clk_gates1: gate-clk@200000d4 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000d4 0x4>;
- clocks = <&xin24m>, <&xin24m>,
- <&xin24m>, <&dummy>,
- <&dummy>, <&xin24m>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&xin24m>, <&dummy>;
-
- clock-output-names =
- "gate_timer0", "gate_timer1",
- "gate_timer3", "gate_jtag",
- "gate_aclk_lcdc1_src", "gate_otgphy0",
- "gate_otgphy1", "gate_ddr_gpll",
- "gate_uart0", "gate_frac_uart0",
- "gate_uart1", "gate_frac_uart1",
- "gate_uart2", "gate_frac_uart2",
- "gate_uart3", "gate_frac_uart3";
-
- #clock-cells = <1>;
- };
-
- clk_gates2: gate-clk@200000d8 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000d8 0x4>;
- clocks = <&clk_gates2 1>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&clk_gates2 3>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy48m>,
- <&dummy>, <&dummy48m>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_periph_src", "gate_aclk_periph",
- "gate_hclk_periph", "gate_pclk_periph",
- "gate_smc", "gate_mac",
- "gate_hsadc", "gate_hsadc_frac",
- "gate_saradc", "gate_spi0",
- "gate_spi1", "gate_mmc0",
- "gate_mac_lbtest", "gate_mmc1",
- "gate_emmc", "reserved";
-
- #clock-cells = <1>;
- };
-
- clk_gates3: gate-clk@200000dc {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000dc 0x4>;
- clocks = <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&xin24m>, <&xin24m>,
- <&dummy>, <&dummy>,
- <&xin24m>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&xin24m>, <&dummy>;
-
- clock-output-names =
- "gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
- "gate_dclk_lcdc1", "gate_pclkin_cif0",
- "gate_timer2", "gate_timer4",
- "gate_hsicphy", "gate_cif0_out",
- "gate_timer5", "gate_aclk_vepu",
- "gate_hclk_vepu", "gate_aclk_vdpu",
- "gate_hclk_vdpu", "reserved",
- "gate_timer6", "gate_aclk_gpu_src";
-
- #clock-cells = <1>;
- };
-
- clk_gates4: gate-clk@200000e0 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000e0 0x4>;
- clocks = <&clk_gates2 2>, <&clk_gates2 3>,
- <&clk_gates2 1>, <&clk_gates2 1>,
- <&clk_gates2 1>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates2 2>,
- <&clk_gates0 4>, <&clk_gates0 4>,
- <&clk_gates0 3>, <&dummy>,
- <&clk_gates0 3>, <&dummy>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
- "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
- "gate_aclk_pei_niu", "gate_hclk_usb_peri",
- "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
- "gate_hclk_cpubus", "gate_hclk_ahb2apb",
- "gate_aclk_strc_sys", "reserved",
- "gate_aclk_intmem", "reserved",
- "gate_hclk_imem1", "gate_hclk_imem0";
-
- #clock-cells = <1>;
- };
-
- clk_gates5: gate-clk@200000e4 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000e4 0x4>;
- clocks = <&clk_gates0 3>, <&clk_gates2 1>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates0 4>, <&clk_gates0 5>,
- <&clk_gates2 1>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates4 5>;
-
- clock-output-names =
- "gate_aclk_dmac1", "gate_aclk_dmac2",
- "gate_pclk_efuse", "gate_pclk_tzpc",
- "gate_pclk_grf", "gate_pclk_pmu",
- "gate_hclk_rom", "gate_pclk_ddrupctl",
- "gate_aclk_smc", "gate_hclk_nandc",
- "gate_hclk_mmc0", "gate_hclk_mmc1",
- "gate_hclk_emmc", "gate_hclk_otg0";
-
- #clock-cells = <1>;
- };
-
- clk_gates6: gate-clk@200000e8 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000e8 0x4>;
- clocks = <&clk_gates3 0>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&clk_gates1 4>,
- <&clk_gates0 4>, <&clk_gates3 0>,
- <&dummy>, <&dummy>,
- <&clk_gates3 0>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&clk_gates1 4>,
- <&clk_gates0 4>, <&clk_gates3 0>;
-
- clock-output-names =
- "gate_aclk_lcdc0", "gate_hclk_lcdc0",
- "gate_hclk_lcdc1", "gate_aclk_lcdc1",
- "gate_hclk_cif0", "gate_aclk_cif0",
- "reserved", "reserved",
- "gate_aclk_ipp", "gate_hclk_ipp",
- "gate_hclk_rga", "gate_aclk_rga",
- "gate_hclk_vio_bus", "gate_aclk_vio0";
-
- #clock-cells = <1>;
- };
-
- clk_gates7: gate-clk@200000ec {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000ec 0x4>;
- clocks = <&clk_gates2 2>, <&clk_gates0 4>,
- <&clk_gates0 4>, <&dummy>,
- <&dummy>, <&clk_gates2 2>,
- <&clk_gates2 2>, <&clk_gates0 5>,
- <&dummy>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates2 3>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&clk_gates2 3>, <&clk_gates2 3>;
-
- clock-output-names =
- "gate_hclk_emac", "gate_hclk_spdif",
- "gate_hclk_i2s0_2ch", "gate_hclk_otg1",
- "gate_hclk_hsic", "gate_hclk_hsadc",
- "gate_hclk_pidf", "gate_pclk_timer0",
- "reserved", "gate_pclk_timer2",
- "gate_pclk_pwm01", "gate_pclk_pwm23",
- "gate_pclk_spi0", "gate_pclk_spi1",
- "gate_pclk_saradc", "gate_pclk_wdt";
-
- #clock-cells = <1>;
- };
-
- clk_gates8: gate-clk@200000f0 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000f0 0x4>;
- clocks = <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates2 3>, <&clk_gates2 3>,
- <&clk_gates2 3>, <&clk_gates0 5>,
- <&clk_gates0 5>, <&clk_gates0 5>,
- <&clk_gates2 3>, <&dummy>;
-
- clock-output-names =
- "gate_pclk_uart0", "gate_pclk_uart1",
- "gate_pclk_uart2", "gate_pclk_uart3",
- "gate_pclk_i2c0", "gate_pclk_i2c1",
- "gate_pclk_i2c2", "gate_pclk_i2c3",
- "gate_pclk_i2c4", "gate_pclk_gpio0",
- "gate_pclk_gpio1", "gate_pclk_gpio2",
- "gate_pclk_gpio3", "gate_aclk_gps";
-
- #clock-cells = <1>;
- };
-
- clk_gates9: gate-clk@200000f4 {
- compatible = "rockchip,rk2928-gate-clk";
- reg = <0x200000f4 0x4>;
- clocks = <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>,
- <&dummy>, <&dummy>;
-
- clock-output-names =
- "gate_clk_core_dbg", "gate_pclk_dbg",
- "gate_clk_trace", "gate_atclk",
- "gate_clk_l2c", "gate_aclk_vio1",
- "gate_pclk_publ", "gate_aclk_gpu";
-
- #clock-cells = <1>;
- };
- };
-
-};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index a5eee55..b7f3423 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -23,59 +23,203 @@
reg = <0x60000000 0x80000000>;
};
- soc {
- uart0: serial@10124000 {
- status = "okay";
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@0 {
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
};
-
- uart1: serial@10126000 {
- status = "okay";
- };
-
- uart2: serial@20064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_xfer>;
- status = "okay";
- };
-
- uart3: serial@20068000 {
- status = "okay";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- button@0 {
- gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
- linux,code = <116>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- gpio-key,wakeup = <1>;
- debounce-interval = <100>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- green {
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- yellow {
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-
- sleep {
- gpios = <&gpio0 15 0>;
- default-state = "off";
- };
- };
-
};
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ green {
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ yellow {
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ sleep {
+ gpios = <&gpio0 15 0>;
+ default-state = "off";
+ };
+ };
+
+ ir_recv: gpio-ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 10 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_recv_pin>;
+ };
+
+ vcc_sd0: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "sdmmc-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ act8846: act8846@5a {
+ compatible = "active-semi,act8846";
+ reg = <0x5a>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&act8846_dvs0_ctl>;
+
+ regulators {
+ vcc_ddr: REG1 {
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vdd_log: REG2 {
+ regulator-name = "VDD_LOG";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vdd_arm: REG3 {
+ regulator-name = "VDD_ARM";
+ regulator-min-microvolt = <875000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ vcc_io: REG4 {
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_10: REG5 {
+ regulator-name = "VDD_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vdd_hdmi: REG6 {
+ regulator-name = "VDD_HDMI";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ vcc18: REG7 {
+ regulator-name = "VCC_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcca_33: REG8 {
+ regulator-name = "VCCA_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_rmii: REG9 {
+ regulator-name = "VCC_RMII";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccio_wl: REG10 {
+ regulator-name = "VCCIO_WL";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_18: REG11 {
+ regulator-name = "VCC18_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc28: REG12 {
+ regulator-name = "VCC_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ num-slots = <1>;
+ status = "okay";
+ vmmc-supply = <&vcc_sd0>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
+ };
+};
+
+&pinctrl {
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ act8846 {
+ act8846_dvs0_ctl: act8846-dvs0-ctl {
+ rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+ };
+
+ ir-receiver {
+ ir_recv_pin: ir-recv-pin {
+ rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 238c996..27215e0 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -15,8 +15,8 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3188-cru.h>
#include "rk3xxx.dtsi"
-#include "rk3188-clocks.dtsi"
/ {
compatible = "rockchip,rk3188";
@@ -52,215 +52,351 @@
};
};
- soc {
- global-timer@1013c200 {
- interrupts = <GIC_PPI 11 0xf04>;
+ sram: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10080000 0x8000>;
+
+ smp-sram@0 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x0 0x50>;
+ };
+ };
+
+ cru: clock-controller@20000000 {
+ compatible = "rockchip,rk3188-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3188-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmu>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@0x2000a000 {
+ compatible = "rockchip,rk3188-gpio-bank0";
+ reg = <0x2000a000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- local-timer@1013c600 {
- interrupts = <GIC_PPI 13 0xf04>;
+ gpio1: gpio1@0x2003c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003c000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- sram: sram@10080000 {
- compatible = "mmio-sram";
- reg = <0x10080000 0x8000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x10080000 0x8000>;
+ gpio2: gpio2@2003e000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003e000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
- smp-sram@0 {
- compatible = "rockchip,rk3066-smp-sram";
- reg = <0x0 0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20080000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg_pull_up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg_pull_down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg_pull_none {
+ bias-disable;
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>;
};
};
- pinctrl@20008000 {
- compatible = "rockchip,rk3188-pinctrl";
- rockchip,grf = <&grf>;
- rockchip,pmu = <&pmu>;
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
- gpio0: gpio0@0x2000a000 {
- compatible = "rockchip,rk3188-gpio-bank0";
- reg = <0x2000a000 0x100>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 9>;
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>,
+ <RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ i2c4 {
+ i2c4_xfer: i2c4-xfer {
+ rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ pwm0 {
+ pwm0_out: pwm0-out {
+ rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_out: pwm1-out {
+ rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_out: pwm2-out {
+ rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_out: pwm3-out {
+ rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
};
- gpio1: gpio1@0x2003c000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003c000 0x100>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 10>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart0_cts: uart0-cts {
+ rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
};
- gpio2: gpio2@2003e000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003e000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 11>;
+ uart0_rts: uart0-rts {
+ rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
};
- gpio3: gpio3@20080000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x20080000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 12>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
+ uart1_cts: uart1-cts {
+ rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
};
- pcfg_pull_up: pcfg_pull_up {
- bias-pull-up;
+ uart1_rts: uart1-rts {
+ rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart2 */
+ };
+
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
};
- pcfg_pull_down: pcfg_pull_down {
- bias-pull-down;
+ uart3_cts: uart3-cts {
+ rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
};
- pcfg_pull_none: pcfg_pull_none {
- bias-disable;
+ uart3_rts: uart3-rts {
+ rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ sd0 {
+ sd0_clk: sd0-clk {
+ rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
};
- uart0 {
- uart0_xfer: uart0-xfer {
- rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart0_cts: uart0-cts {
- rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart0_rts: uart0-rts {
- rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_cmd: sd0-cmd {
+ rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
};
- uart1 {
- uart1_xfer: uart1-xfer {
- rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart1_cts: uart1-cts {
- rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart1_rts: uart1-rts {
- rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_cd: sd0-cd {
+ rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
};
- uart2 {
- uart2_xfer: uart2-xfer {
- rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
- };
- /* no rts / cts for uart2 */
+ sd0_wp: sd0-wp {
+ rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
};
- uart3 {
- uart3_xfer: uart3-xfer {
- rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
- <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart3_cts: uart3-cts {
- rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart3_rts: uart3-rts {
- rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_pwr: sd0-pwr {
+ rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
};
- sd0 {
- sd0_clk: sd0-clk {
- rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_cmd: sd0-cmd {
- rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_cd: sd0-cd {
- rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_wp: sd0-wp {
- rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_pwr: sd0-pwr {
- rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_bus1: sd0-bus-width1 {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- sd0_bus4: sd0-bus-width4 {
- rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_bus1: sd0-bus-width1 {
+ rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
};
- sd1 {
- sd1_clk: sd1-clk {
- rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd0_bus4: sd0-bus-width4 {
+ rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
- sd1_cmd: sd1-cmd {
- rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1 {
+ sd1_clk: sd1-clk {
+ rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
- sd1_cd: sd1-cd {
- rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1_cmd: sd1-cmd {
+ rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
+ };
- sd1_wp: sd1-wp {
- rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1_cd: sd1-cd {
+ rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
+ };
- sd1_bus1: sd1-bus-width1 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1_wp: sd1-wp {
+ rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
+ };
- sd1_bus4: sd1-bus-width4 {
- rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
- <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
- };
+ sd1_bus1: sd1-bus-width1 {
+ rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
};
};
};
};
+
+&global_timer {
+ interrupts = <GIC_PPI 11 0xf04>;
+};
+
+&local_timer {
+ interrupts = <GIC_PPI 13 0xf04>;
+};
+
+&i2c0 {
+ compatible = "rockchip,rk3188-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+};
+
+&i2c1 {
+ compatible = "rockchip,rk3188-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+};
+
+&i2c2 {
+ compatible = "rockchip,rk3188-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+};
+
+&i2c3 {
+ compatible = "rockchip,rk3188-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+};
+
+&i2c4 {
+ compatible = "rockchip,rk3188-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_xfer>;
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_out>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_out>;
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_out>;
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_out>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_xfer>;
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
new file mode 100644
index 0000000..7d59ff4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -0,0 +1,134 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+ compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
+};
+
+&i2c0 {
+ hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+
+ #clock-cells = <0>;
+ clock-output-names = "xin32k";
+ };
+
+ act8846: act8846@5a {
+ compatible = "active-semi,act8846";
+ reg = <0x5a>;
+ status = "okay";
+
+ regulators {
+ vcc_ddr: REG1 {
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_io: REG2 {
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_log: REG3 {
+ regulator-name = "VDD_LOG";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_20: REG4 {
+ regulator-name = "VCC_20";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ vccio_sd: REG5 {
+ regulator-name = "VCCIO_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd10_lcd: REG6 {
+ regulator-name = "VDD10_LCD";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcca_codec: REG7 {
+ regulator-name = "VCCA_CODEC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcca_tp: REG8 {
+ regulator-name = "VCCA_TP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccio_pmu: REG9 {
+ regulator-name = "VCCIO_PMU";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_10: REG10 {
+ regulator-name = "VDD_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_18: REG11 {
+ regulator-name = "VCC_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc18_lcd: REG12 {
+ regulator-name = "VCC18_LCD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
new file mode 100644
index 0000000..9a88b6c6
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+ compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
new file mode 100644
index 0000000..749e20d
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -0,0 +1,74 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+ memory {
+ reg = <0x0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ button@0 {
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
new file mode 100644
index 0000000..3ef8951
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -0,0 +1,575 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3288";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a12";
+ reg = <0x500>;
+ };
+ cpu@501 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a12";
+ reg = <0x501>;
+ };
+ cpu@502 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a12";
+ reg = <0x502>;
+ };
+ cpu@503 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a12";
+ reg = <0x503>;
+ };
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ i2c1: i2c@ff140000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff140000 0x1000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ff150000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff150000 0x1000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ff160000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff160000 0x1000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_xfer>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@ff170000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff170000 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_xfer>;
+ status = "disabled";
+ };
+
+ uart0: serial@ff180000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff180000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+ status = "disabled";
+ };
+
+ uart1: serial@ff190000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff190000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff690000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff690000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "disabled";
+ };
+
+ uart3: serial@ff1b0000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff1b0000 0x100>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_xfer>;
+ status = "disabled";
+ };
+
+ uart4: serial@ff1c0000 {
+ compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+ reg = <0xff1c0000 0x100>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@ff650000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff650000 0x1000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ff660000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0xff660000 0x1000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ status = "disabled";
+ };
+
+ pmu: power-management@ff730000 {
+ compatible = "rockchip,rk3288-pmu", "syscon";
+ reg = <0xff730000 0x100>;
+ };
+
+ sgrf: syscon@ff740000 {
+ compatible = "rockchip,rk3288-sgrf", "syscon";
+ reg = <0xff740000 0x1000>;
+ };
+
+ cru: clock-controller@ff760000 {
+ compatible = "rockchip,rk3288-cru";
+ reg = <0xff760000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ grf: syscon@ff770000 {
+ compatible = "rockchip,rk3288-grf", "syscon";
+ reg = <0xff770000 0x1000>;
+ };
+
+ wdt: watchdog@ff800000 {
+ compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
+ reg = <0xff800000 0x100>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@ffc01000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0xffc01000 0x1000>,
+ <0xffc02000 0x1000>,
+ <0xffc04000 0x2000>,
+ <0xffc06000 0x2000>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3288-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmu>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@ff750000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff750000 0x100>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@ff780000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff780000 0x100>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@ff790000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff790000 0x100>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@ff7a0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7a0000 0x100>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio4@ff7b0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7b0000 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO4>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio5@ff7c0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7c0000 0x100>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO5>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio6@ff7d0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7d0000 0x100>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO6>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio7@ff7e0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7e0000 0x100>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO7>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio8: gpio8@ff7f0000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0xff7f0000 0x100>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO8>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
+ <0 16 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>,
+ <8 5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>,
+ <6 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>,
+ <2 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c4 {
+ i2c4_xfer: i2c4-xfer {
+ rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>,
+ <7 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c5 {
+ i2c5_xfer: i2c5-xfer {
+ rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>,
+ <7 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_cd: sdmcc-cd {
+ rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_pwr: emmc-pwr {
+ rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_bus1: emmc-bus1 {
+ rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_bus4: emmc-bus4 {
+ rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+ <3 1 RK_FUNC_2 &pcfg_pull_up>,
+ <3 2 RK_FUNC_2 &pcfg_pull_up>,
+ <3 3 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+ <3 1 RK_FUNC_2 &pcfg_pull_up>,
+ <3 2 RK_FUNC_2 &pcfg_pull_up>,
+ <3 3 RK_FUNC_2 &pcfg_pull_up>,
+ <3 4 RK_FUNC_2 &pcfg_pull_up>,
+ <3 5 RK_FUNC_2 &pcfg_pull_up>,
+ <3 6 RK_FUNC_2 &pcfg_pull_up>,
+ <3 7 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,
+ <4 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>,
+ <5 9 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>,
+ <7 23 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart2 */
+ };
+
+ uart3 {
+ uart3_xfer: uart3-xfer {
+ rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>,
+ <7 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart3_cts: uart3-cts {
+ rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart3_rts: uart3-rts {
+ rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart4 {
+ uart4_xfer: uart4-xfer {
+ rockchip,pins = <5 12 3 &pcfg_pull_up>,
+ <5 13 3 &pcfg_pull_none>;
+ };
+
+ uart4_cts: uart4-cts {
+ rockchip,pins = <5 14 3 &pcfg_pull_none>;
+ };
+
+ uart4_rts: uart4-rts {
+ rockchip,pins = <5 15 3 &pcfg_pull_none>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 2adf1cc9e..c6f0561 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -20,120 +20,240 @@
/ {
interrupt-parent = <&gic>;
- soc {
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ clock-output-names = "xin24m";
+ };
+
+ L2: l2-cache-controller@10138000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x10138000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ scu@1013c000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x1013c000 0x100>;
+ };
+
+ global_timer: global-timer@1013c200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x1013c200 0x20>;
+ interrupts = <GIC_PPI 11 0x304>;
+ clocks = <&cru CORE_PERI>;
+ };
+
+ local_timer: local-timer@1013c600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x1013c600 0x20>;
+ interrupts = <GIC_PPI 13 0x304>;
+ clocks = <&cru CORE_PERI>;
+ };
+
+ gic: interrupt-controller@1013d000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x1013d000 0x1000>,
+ <0x1013c100 0x0100>;
+ };
+
+ uart0: serial@10124000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10124000 0x400>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial@10126000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10126000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ status = "disabled";
+ };
+
+ mmc0: dwmmc@10214000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x10214000 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges;
+ #size-cells = <0>;
- scu@1013c000 {
- compatible = "arm,cortex-a9-scu";
- reg = <0x1013c000 0x100>;
- };
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+ clock-names = "biu", "ciu";
- pmu: pmu@20004000 {
- compatible = "rockchip,rk3066-pmu", "syscon";
- reg = <0x20004000 0x100>;
- };
+ status = "disabled";
+ };
- grf: grf@20008000 {
- compatible = "syscon";
- reg = <0x20008000 0x200>;
- };
+ mmc1: dwmmc@10218000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x10218000 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- gic: interrupt-controller@1013d000 {
- compatible = "arm,cortex-a9-gic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x1013d000 0x1000>,
- <0x1013c100 0x0100>;
- };
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
+ clock-names = "biu", "ciu";
- L2: l2-cache-controller@10138000 {
- compatible = "arm,pl310-cache";
- reg = <0x10138000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
+ status = "disabled";
+ };
- global-timer@1013c200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x1013c200 0x20>;
- interrupts = <GIC_PPI 11 0x304>;
- clocks = <&dummy150m>;
- };
+ pmu: pmu@20004000 {
+ compatible = "rockchip,rk3066-pmu", "syscon";
+ reg = <0x20004000 0x100>;
+ };
- local-timer@1013c600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x1013c600 0x20>;
- interrupts = <GIC_PPI 13 0x304>;
- clocks = <&dummy150m>;
- };
+ grf: grf@20008000 {
+ compatible = "syscon";
+ reg = <0x20008000 0x200>;
+ };
- uart0: serial@10124000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10124000 0x400>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 8>;
- status = "disabled";
- };
+ i2c0: i2c@2002d000 {
+ compatible = "rockchip,rk3066-i2c";
+ reg = <0x2002d000 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- uart1: serial@10126000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x10126000 0x400>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 10>;
- status = "disabled";
- };
+ rockchip,grf = <&grf>;
+ rockchip,bus-index = <0>;
- uart2: serial@20064000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20064000 0x400>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 12>;
- status = "disabled";
- };
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C0>;
- uart3: serial@20068000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x20068000 0x400>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <1>;
- clocks = <&clk_gates1 14>;
- status = "disabled";
- };
+ status = "disabled";
+ };
- dwmmc@10214000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10214000 0x1000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ i2c1: i2c@2002f000 {
+ compatible = "rockchip,rk3066-i2c";
+ reg = <0x2002f000 0x1000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- clocks = <&clk_gates5 10>, <&clk_gates2 11>;
- clock-names = "biu", "ciu";
+ rockchip,grf = <&grf>;
- status = "disabled";
- };
+ clocks = <&cru PCLK_I2C1>;
+ clock-names = "i2c";
- dwmmc@10218000 {
- compatible = "rockchip,rk2928-dw-mshc";
- reg = <0x10218000 0x1000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
+ status = "disabled";
+ };
- clocks = <&clk_gates5 11>, <&clk_gates2 13>;
- clock-names = "biu", "ciu";
+ pwm0: pwm@20030000 {
+ compatible = "rockchip,rk2928-pwm";
+ reg = <0x20030000 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cru PCLK_PWM01>;
+ status = "disabled";
+ };
- status = "disabled";
- };
+ pwm1: pwm@20030010 {
+ compatible = "rockchip,rk2928-pwm";
+ reg = <0x20030010 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cru PCLK_PWM01>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@20050020 {
+ compatible = "rockchip,rk2928-pwm";
+ reg = <0x20050020 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cru PCLK_PWM23>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@20050030 {
+ compatible = "rockchip,rk2928-pwm";
+ reg = <0x20050030 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cru PCLK_PWM23>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@20056000 {
+ compatible = "rockchip,rk3066-i2c";
+ reg = <0x20056000 0x1000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rockchip,grf = <&grf>;
+
+ clocks = <&cru PCLK_I2C2>;
+ clock-names = "i2c";
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@2005a000 {
+ compatible = "rockchip,rk3066-i2c";
+ reg = <0x2005a000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rockchip,grf = <&grf>;
+
+ clocks = <&cru PCLK_I2C3>;
+ clock-names = "i2c";
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@2005e000 {
+ compatible = "rockchip,rk3066-i2c";
+ reg = <0x2005e000 0x1000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rockchip,grf = <&grf>;
+
+ clocks = <&cru PCLK_I2C4>;
+ clock-names = "i2c";
+
+ status = "disabled";
+ };
+
+ uart2: serial@20064000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20064000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial@20068000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20068000 0x400>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ clock-names = "baudclk", "apb_pclk";
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index e0b15a6..45013b8 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -58,19 +58,19 @@
reg = <0x20000000 0x8000000>;
};
- slow_xtal: slow_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- main_xtal: main_xtal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
clocks {
+ slow_xtal: slow_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ main_xtal: main_xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index b0b1331..f7d8583 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -18,12 +18,14 @@
reg = <0x20000000 0x20000000>;
};
- slow_xtal {
- clock-frequency = <32768>;
- };
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
- main_xtal {
- clock-frequency = <12000000>;
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 306eef0..b8c6f20 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -45,6 +45,8 @@
wm8904: wm8904@1a {
compatible = "wm8904";
reg = <0x1a>;
+ clocks = <&pck0>;
+ clock-names = "mclk";
};
};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index a99171c..18662ae 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -21,6 +21,10 @@
model = "KZM-A9-GT";
compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
+ aliases {
+ serial4 = &scifa4;
+ };
+
cpus {
cpu@0 {
cpu0-supply = <&vdd_dvfs>;
@@ -35,7 +39,7 @@
};
chosen {
- bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
+ bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
};
memory {
@@ -276,9 +280,6 @@
};
&pfc {
- pinctrl-0 = <&scifa4_pins>;
- pinctrl-names = "default";
-
i2c3_pins: i2c3 {
renesas,groups = "i2c3_1";
renesas,function = "i2c3";
@@ -318,6 +319,13 @@
};
};
+&scifa4 {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 5ecf552..910b790 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -235,6 +235,78 @@
status = "disabled";
};
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+ reg = <0xe6c40000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+ reg = <0xe6c50000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+ reg = <0xe6c60000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+ reg = <0xe6c70000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c80000 {
+ compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+ reg = <0xe6c80000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa5: serial@e6cb0000 {
+ compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+ reg = <0xe6cb0000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa6: serial@e6cc0000 {
+ compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+ reg = <0xe6cc0000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifa7: serial@e6cd0000 {
+ compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+ reg = <0xe6cd0000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifb8: serial@e6c30000 {
+ compatible = "renesas,scifb-sh73a0", "renesas,scifb";
+ reg = <0xe6c30000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
pfc: pfc@e6050000 {
compatible = "renesas,pfc-sh73a0";
reg = <0xe6050000 0x8000>,
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 4676f25..0a66d8a 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -683,6 +683,7 @@
};
rst: rstmgr@ffd05000 {
+ #reset-cells = <1>;
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x1000>;
};
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index e41eedc..9d23230 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -875,6 +875,10 @@
reg = <0x80119000 0x1000>;
interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
+ <&dma 41 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
clock-names = "sdi", "apb_pclk";
@@ -901,6 +905,10 @@
reg = <0x80008000 0x1000>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
+ <&dma 43 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
clock-names = "sdi", "apb_pclk";
@@ -929,6 +937,7 @@
interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
+ /* This DMA channel only exist on DB8500 v1 */
dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
dma-names = "tx";
@@ -962,6 +971,7 @@
interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
+ /* This DMA channel only exist on DB8500 v2 */
dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
dma-names = "rx";
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 1c35744..84d7c5d 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -42,6 +42,8 @@
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpio6>;
interrupt-controller;
+ vcc-supply = <&db8500_vsmps2_reg>;
+ vio-supply = <&db8500_vsmps2_reg>;
wakeup-source;
st,autosleep-timeout = <1024>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index c405653..18b65d1 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -88,6 +88,43 @@
};
};
};
+ /* Sensors mounted on this board variant */
+ i2c@80128000 {
+ lsm303dlh@18 {
+ /* Accelerometer */
+ compatible = "st,lsm303dlh-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x18>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_tvk_mode>;
+ };
+ lsm303dlm@1e {
+ /* Magnetometer */
+ compatible = "st,lsm303dlm-magn";
+ reg = <0x1e>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&magneto_tvk_mode>;
+ };
+ l3g4200d@68 {
+ /* Gyroscope */
+ compatible = "st,l3g4200d-gyro";
+ st,drdy-int-pin = <2>;
+ reg = <0x68>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ };
+ lsp001wm@5c {
+ /* Barometer/pressure sensor */
+ compatible = "st,lps001wp-press";
+ reg = <0x5c>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ };
+ };
pinctrl {
/* Pull up this GPIO pin */
tc35893 {
@@ -114,6 +151,28 @@
};
};
};
+ accelerometer {
+ accel_tvk_mode: accel_tvk {
+ /* Accelerometer interrupt lines 1 & 2 */
+ tvk_cfg {
+ ste,pins = "GPIO82_C1", "GPIO83_D3";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ magnetometer {
+ magneto_tvk_mode: magneto_tvk {
+ /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+ tvk_cfg1 {
+ ste,pins = "GPIO31_V3";
+ ste,config = <&gpio_in_pu>;
+ };
+ tvk_cfg2 {
+ ste,pins = "GPIO32_V2";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index c234106..bcc1f0c 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -35,8 +35,6 @@
*/
pinctrl-names = "default";
pinctrl-0 = <&ipgpio_hrefv60_mode>,
- <&accel_hrefv60_mode>,
- <&magneto_hrefv60_mode>,
<&etm_hrefv60_mode>,
<&nahj_hrefv60_mode>,
<&nfc_hrefv60_mode>,
@@ -83,28 +81,6 @@
};
};
};
- accelerometer {
- accel_hrefv60_mode: accel_hrefv60 {
- /* Accelerometer interrupt lines 1 & 2 */
- hrefv60_cfg1 {
- ste,pins = "GPIO82_C1", "GPIO83_D3";
- ste,config = <&gpio_in_pu>;
- };
- };
- };
- magnetometer {
- magneto_hrefv60_mode: magneto_hrefv60 {
- /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
- hrefv60_cfg1 {
- ste,pins = "GPIO31_V3";
- ste,config = <&gpio_in_pu>;
- };
- hrefv60_cfg2 {
- ste,pins = "GPIO32_V2";
- ste,config = <&gpio_in_pd>;
- };
- };
- };
etm {
/*
* Drive D19-D23 for the ETM PTM trace interface low,
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 474ef832..4a2000c 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -241,6 +241,40 @@
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c2_default_mode>;
pinctrl-1 = <&i2c2_sleep_mode>;
+ lsm303dlh@18 {
+ /* Accelerometer */
+ compatible = "st,lsm303dlh-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x18>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_snowball_mode>;
+ };
+ lsm303dlm@1e {
+ /* Magnetometer */
+ compatible = "st,lsm303dlm-magn";
+ reg = <0x1e>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&magneto_snowball_mode>;
+ };
+ l3g4200d@68 {
+ /* Gyroscope */
+ compatible = "st,l3g4200d-gyro";
+ st,drdy-int-pin = <2>;
+ reg = <0x68>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ };
+ lsp001wm@5c {
+ /* Barometer/pressure sensor */
+ compatible = "st,lps001wp-press";
+ reg = <0x5c>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ };
};
i2c@80110000 {
@@ -361,9 +395,7 @@
* can be moved over to being controlled by respective device.
*/
pinctrl-names = "default";
- pinctrl-0 = <&accel_snowball_mode>,
- <&magneto_snowball_mode>,
- <&gbf_snowball_mode>,
+ pinctrl-0 = <&gbf_snowball_mode>,
<&wlan_snowball_mode>;
ethernet {
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 0b97c07..9e99ade 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -88,6 +88,12 @@
};
};
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@@ -98,6 +104,15 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
new file mode 100644
index 0000000..1763cc7
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "BA10 tvbox";
+ compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+ soc@01c00000 {
+ emac: ethernet@01c0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+ };
+
+ mdio@01c0b080 {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ usbphy: phy@01c13400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c14400 {
+ status = "okay";
+ };
+
+ ehci1: usb@01c1c000 {
+ status = "okay";
+ };
+
+ ohci1: usb@01c1c400 {
+ status = "okay";
+ };
+
+ pinctrl@01c20800 {
+ usb2_vbus_pin_a: usb2_vbus_pin@0 {
+ allwinner,pins = "PH12";
+ };
+ };
+
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ status = "okay";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ gpio = <&pio 7 12 0>;
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index c200eac..3ce56bfb 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -80,6 +80,12 @@
};
};
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@@ -90,6 +96,15 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
i2c1: i2c@01c2b000 {
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 547fadc..891ea44 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -87,11 +87,32 @@
};
};
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
};
reg_emac_3v3: emac-3v3 {
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index f13723e..6b0c378 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -40,12 +40,6 @@
status = "okay";
};
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
- };
-
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
@@ -67,6 +61,21 @@
ohci1: usb@01c1c400 {
status = "okay";
};
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
};
reg_usb1_vbus: usb1-vbus {
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index c01cea5..b9ecce6 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -52,11 +52,39 @@
status = "okay";
};
+ pinctrl@01c20800 {
+ ir0_pins_a: ir0@0 {
+ /* The ir receiver is not always populated */
+ allwinner,pull = <1>;
+ };
+ };
+
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
};
reg_usb1_vbus: usb1-vbus {
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index d46a7db..d046d56 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -91,6 +91,21 @@
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
};
leds {
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index fb03bcc..6675bcd 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -76,6 +76,15 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index d96e179..459cb63 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -509,7 +509,7 @@
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
- #address-cells = <1>;
+ #interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
@@ -593,6 +593,20 @@
allwinner,drive = <0>;
allwinner,pull = <1>;
};
+
+ ir0_pins_a: ir0@0 {
+ allwinner,pins = "PB3","PB4";
+ allwinner,function = "ir0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ ir1_pins_a: ir1@0 {
+ allwinner,pins = "PB22","PB23";
+ allwinner,function = "ir1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
@@ -621,6 +635,24 @@
status = "disabled";
};
+ ir0: ir@01c21800 {
+ compatible = "allwinner,sun4i-a10-ir";
+ clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clock-names = "apb", "ir";
+ interrupts = <5>;
+ reg = <0x01c21800 0x40>;
+ status = "disabled";
+ };
+
+ ir1: ir@01c21c00 {
+ compatible = "allwinner,sun4i-a10-ir";
+ clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clock-names = "apb", "ir";
+ interrupts = <6>;
+ reg = <0x01c21c00 0x40>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index b64f705..24b0ad3 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -422,7 +422,7 @@
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
- #address-cells = <1>;
+ #interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 3b2a94c..bf86e65 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -395,7 +395,7 @@
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
- #address-cells = <1>;
+ #interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
new file mode 100644
index 0000000..f142065
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Merrii A31 Hummingbird";
+ compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200";
+ };
+
+ soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 8 0>; /* PA8 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ usbphy: phy@01c19400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c1a000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c1a400 {
+ status = "okay";
+ };
+
+ pio: pinctrl@01c20800 {
+ mmc0_pins_a: mmc0@0 {
+ /* external pull-ups missing for some pins */
+ allwinner,pull = <1>;
+ };
+
+ mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
+ allwinner,pins = "PA8";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ usb1_vbus_pin_a: usb1_vbus_pin@0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ /* pull-ups and devices require AXP221 DLDO3 */
+ status = "failed";
+ };
+
+ i2c1: i2c@01c2b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ i2c2: i2c@01c2b400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ gmac: ethernet@01c30000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ pinctrl-0 = <&usb1_vbus_pin_a>;
+ gpio = <&pio 7 24 0>; /* PH24 */
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index a9dfa12..44b07e5 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -23,6 +23,7 @@
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
+ ethernet0 = &gmac;
};
@@ -281,6 +282,34 @@
"usb_ohci0", "usb_ohci1",
"usb_ohci2";
};
+
+ /*
+ * The following two are dummy clocks, placeholders used in the gmac_tx
+ * clock. The gmac driver will choose one parent depending on the PHY
+ * interface mode, using clk_set_rate auto-reparenting.
+ * The actual TX clock rate is not controlled by the gmac_tx clock.
+ */
+ mii_phy_tx_clk: clk@1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "mii_phy_tx";
+ };
+
+ gmac_int_tx_clk: clk@2 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_int_tx";
+ };
+
+ gmac_tx_clk: clk@01c200d0 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun7i-a20-gmac-clk";
+ reg = <0x01c200d0 0x4>;
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac_tx";
+ };
};
soc@01c00000 {
@@ -429,7 +458,7 @@
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
- #address-cells = <1>;
+ #interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
@@ -467,6 +496,48 @@
allwinner,drive = <2>;
allwinner,pull = <0>;
};
+
+ gmac_pins_mii_a: gmac_mii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA8", "PA9", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA26", "PA27";
+ allwinner,function = "gmac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_gmii_a: gmac_gmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA4", "PA5", "PA6", "PA7",
+ "PA8", "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA15",
+ "PA16", "PA17", "PA18", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA25", "PA26", "PA27";
+ allwinner,function = "gmac";
+ /*
+ * data lines in GMII mode run at 125MHz and
+ * might need a higher signal drive strength
+ */
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_rgmii_a: gmac_rgmii@0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA25", "PA26", "PA27";
+ allwinner,function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
ahb1_rst: reset@01c202c0 {
@@ -621,6 +692,23 @@
status = "disabled";
};
+ gmac: ethernet@01c30000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c30000 0x1054>;
+ interrupts = <0 82 4>;
+ interrupt-names = "macirq";
+ clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ resets = <&ahb1_rst 17>;
+ reset-names = "stmmaceth";
+ snps,pbl = <2>;
+ snps,fixed-burst;
+ snps,force_sf_dma_mode;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
timer@01c60000 {
compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
@@ -756,7 +844,7 @@
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
- #address-cells = <1>;
+ #interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index a5ad945..5368098 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -66,6 +66,12 @@
};
};
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@@ -76,6 +82,16 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
i2c1: i2c@01c2b000 {
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index b87fea9..a6c1a3c 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -100,6 +100,12 @@
status = "okay";
};
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@@ -110,6 +116,16 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
i2c1: i2c@01c2b000 {
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index b77308e..6a67712 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -94,12 +94,34 @@
};
};
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
gmac: ethernet@01c50000 {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index b759630..9d669cdf 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -122,6 +122,16 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
i2c1: i2c@01c2b000 {
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
new file mode 100644
index 0000000..046dfc0
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "LinkSprite pcDuino3";
+ compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+ soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ usbphy: phy@01c13400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c14400 {
+ status = "okay";
+ };
+
+ ahci: sata@01c18000 {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+ };
+
+ ehci1: usb@01c1c000 {
+ status = "okay";
+ };
+
+ ohci1: usb@01c1c400 {
+ status = "okay";
+ };
+
+ pinctrl@01c20800 {
+ ahci_pwr_pin_a: ahci_pwr_pin@0 {
+ allwinner,pins = "PH2";
+ };
+
+ led_pins_pcduino3: led_pins@0 {
+ allwinner,pins = "PH15", "PH16";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ key_pins_pcduino3: key_pins@0 {
+ allwinner,pins = "PH17", "PH18", "PH19";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_pcduino3>;
+
+ tx {
+ label = "pcduino3:green:tx";
+ gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+ };
+
+ rx {
+ label = "pcduino3:green:rx";
+ gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_pcduino3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ button@0 {
+ label = "Key Back";
+ linux,code = <KEY_BACK>;
+ gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+ };
+ button@1 {
+ label = "Key Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+ };
+ button@2 {
+ label = "Key Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ status = "okay";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ status = "okay";
+ };
+
+ reg_ahci_5v: ahci-5v {
+ gpio = <&pio 7 2 0>;
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 01e9466..4011628 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -586,7 +586,7 @@
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
- #address-cells = <1>;
+ #interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
@@ -738,6 +738,20 @@
allwinner,drive = <2>;
allwinner,pull = <0>;
};
+
+ ir0_pins_a: ir0@0 {
+ allwinner,pins = "PB3","PB4";
+ allwinner,function = "ir0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ ir1_pins_a: ir1@0 {
+ allwinner,pins = "PB22","PB23";
+ allwinner,function = "ir1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
@@ -771,6 +785,24 @@
status = "disabled";
};
+ ir0: ir@01c21800 {
+ compatible = "allwinner,sun4i-a10-ir";
+ clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clock-names = "apb", "ir";
+ interrupts = <0 5 4>;
+ reg = <0x01c21800 0x40>;
+ status = "disabled";
+ };
+
+ ir1: ir@01c21c00 {
+ compatible = "allwinner,sun4i-a10-ir";
+ clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clock-names = "apb", "ir";
+ interrupts = <0 6 4>;
+ reg = <0x01c21c00 0x40>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
new file mode 100644
index 0000000..34002e3
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun8i-a23.dtsi"
+
+/ {
+ model = "Ippo Q8H Dual Core Tablet (v5)";
+ compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200";
+ };
+
+ soc@01c00000 {
+ r_uart: serial@01f02800 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
new file mode 100644
index 0000000..54ac0787
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &r_uart;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ pll1: clk@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll1";
+ };
+
+ /* dummy clock until actually implemented */
+ pll6: pll6_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <600000000>;
+ clock-output-names = "pll6";
+ };
+
+ cpu: cpu_clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-cpu-clk";
+ reg = <0x01c20050 0x4>;
+
+ /*
+ * PLL1 is listed twice here.
+ * While it looks suspicious, it's actually documented
+ * that way both in the datasheet and in the code from
+ * Allwinner.
+ */
+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+ clock-output-names = "cpu";
+ };
+
+ axi: axi_clk@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-axi-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&cpu>;
+ clock-output-names = "axi";
+ };
+
+ ahb1_mux: ahb1_mux_clk@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+ clock-output-names = "ahb1_mux";
+ };
+
+ ahb1: ahb1_clk@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-ahb-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb1_mux>;
+ clock-output-names = "ahb1";
+ };
+
+ apb1: apb1_clk@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb0-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&ahb1>;
+ clock-output-names = "apb1";
+ };
+
+ ahb1_gates: clk@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb1>;
+ clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+ "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+ "ahb1_nand", "ahb1_sdram",
+ "ahb1_hstimer", "ahb1_spi0",
+ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+ "ahb1_csi", "ahb1_be", "ahb1_fe",
+ "ahb1_gpu", "ahb1_spinlock",
+ "ahb1_drc";
+ };
+
+ apb1_gates: clk@01c20068 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a23-apb1-gates-clk";
+ reg = <0x01c20068 0x4>;
+ clocks = <&apb1>;
+ clock-output-names = "apb1_codec", "apb1_pio",
+ "apb1_daudio0", "apb1_daudio1";
+ };
+
+ apb2_mux: apb2_mux_clk@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+ clock-output-names = "apb2_mux";
+ };
+
+ apb2: apb2_clk@01c20058 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun6i-a31-apb2-div-clk";
+ reg = <0x01c20058 0x4>;
+ clocks = <&apb2_mux>;
+ clock-output-names = "apb2";
+ };
+
+ apb2_gates: clk@01c2006c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a23-apb2-gates-clk";
+ reg = <0x01c2006c 0x4>;
+ clocks = <&apb2>;
+ clock-output-names = "apb2_i2c0", "apb2_i2c1",
+ "apb2_i2c2", "apb2_uart0",
+ "apb2_uart1", "apb2_uart2",
+ "apb2_uart3", "apb2_uart4";
+ };
+ };
+
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ahb1_rst: reset@01c202c0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202c0 0xc>;
+ };
+
+ apb1_rst: reset@01c202d0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d0 0x4>;
+ };
+
+ apb2_rst: reset@01c202d8 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x01c202d8 0x4>;
+ };
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x01c20c00 0xa0>;
+ interrupts = <0 18 4>,
+ <0 19 4>;
+ clocks = <&osc24M>;
+ };
+
+ wdt0: watchdog@01c20ca0 {
+ compatible = "allwinner,sun6i-a31-wdt";
+ reg = <0x01c20ca0 0x20>;
+ interrupts = <0 25 4>;
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <0 0 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 16>;
+ resets = <&apb2_rst 16>;
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <0 1 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 17>;
+ resets = <&apb2_rst 17>;
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <0 2 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 18>;
+ resets = <&apb2_rst 18>;
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <0 3 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 19>;
+ resets = <&apb2_rst 19>;
+ status = "disabled";
+ };
+
+ uart4: serial@01c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <0 4 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb2_gates 20>;
+ resets = <&apb2_rst 20>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ prcm@01f01400 {
+ compatible = "allwinner,sun8i-a23-prcm";
+ reg = <0x01f01400 0x200>;
+
+ ar100: ar100_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&osc24M>;
+ clock-output-names = "ar100";
+ };
+
+ ahb0: ahb0_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&ar100>;
+ clock-output-names = "ahb0";
+ };
+
+ apb0: apb0_clk {
+ compatible = "allwinner,sun8i-a23-apb0-clk";
+ #clock-cells = <0>;
+ clocks = <&ahb0>;
+ clock-output-names = "apb0";
+ };
+
+ apb0_gates: apb0_gates_clk {
+ compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+ #clock-cells = <1>;
+ clocks = <&apb0>;
+ clock-output-names = "apb0_pio", "apb0_timer",
+ "apb0_rsb", "apb0_uart",
+ "apb0_i2c";
+ };
+
+ apb0_rst: apb0_rst {
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ r_uart: serial@01f02800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01f02800 0x400>;
+ interrupts = <0 38 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb0_gates 4>;
+ resets = <&apb0_rst 4>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 0b0e8e0..c7c6825 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -28,6 +28,22 @@
reg = <0x80000000 0x79600000>;
};
+ host1x@50000000 {
+ dsi@54300000 {
+ status = "okay";
+
+ vdd-supply = <&vdd_1v2_ap>;
+
+ panel@0 {
+ compatible = "lg,lh500wx1-sd03";
+ reg = <0>;
+
+ power-supply = <&vdd_lcd>;
+ backlight = <&backlight>;
+ };
+ };
+ };
+
pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -244,7 +260,7 @@
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
@@ -262,7 +278,7 @@
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc3_cmd_pa7 {
nvidia,pins = "sdmmc3_cmd_pa7",
@@ -290,7 +306,7 @@
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
sdmmc4_cmd_pt7 {
nvidia,pins = "sdmmc4_cmd_pt7",
@@ -730,7 +746,6 @@
nvidia,pins = "drive_sdio1";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <36>;
nvidia,pull-up-strength = <20>;
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
@@ -740,7 +755,6 @@
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <36>;
nvidia,pull-up-strength = <20>;
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
@@ -750,12 +764,10 @@
nvidia,pins = "drive_gma";
nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
nvidia,pull-down-strength = <2>;
nvidia,pull-up-strength = <2>;
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
- nvidia,drive-type = <1>;
};
};
};
@@ -815,7 +827,6 @@
regulator-name = "vdd-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-boot-on;
};
@@ -862,10 +873,11 @@
regulator-name = "vdd-2v8-display";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-always-on;
regulator-boot-on;
};
- ldo3 {
+ vdd_1v2_ap: ldo3 {
regulator-name = "avdd-1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -1052,7 +1064,7 @@
regulator-boot-on;
};
- regulator@1 {
+ vdd_lcd: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vdd_lcd_1v8";
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index fdc559a..335a1d8 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -220,6 +220,12 @@
interrupt-controller;
};
+ apbmisc@70000800 {
+ compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
+ reg = <0x70000800 0x64 /* Chip revision */
+ 0x70000008 0x04>; /* Strapping options */
+ };
+
pinmux: pinmux@70000868 {
compatible = "nvidia,tegra114-pinmux";
reg = <0x70000868 0x148 /* Pad control registers */
@@ -485,6 +491,15 @@
clock-names = "pclk", "clk32k_in";
};
+ fuse@7000f800 {
+ compatible = "nvidia,tegra114-efuse";
+ reg = <0x7000f800 0x400>;
+ clocks = <&tegra_car TEGRA114_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
iommu@70019010 {
compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
reg = <0x70019010 0x02c
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index e31fb61..624b0fb 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1461,7 +1461,7 @@
regulator-max-microamp = <3500000>;
regulator-always-on;
regulator-boot-on;
- ams,external-control = <2>;
+ ams,ext-control = <2>;
};
sd1 {
@@ -1472,7 +1472,7 @@
regulator-max-microamp = <2500000>;
regulator-always-on;
regulator-boot-on;
- ams,external-control = <1>;
+ ams,ext-control = <1>;
};
vdd_1v35_lp0: sd2 {
@@ -1521,7 +1521,7 @@
regulator-max-microvolt = <1050000>;
regulator-boot-on;
regulator-always-on;
- ams,external-control = <1>;
+ ams,ext-control = <1>;
};
ldo1 {
@@ -1619,6 +1619,32 @@
nvidia,sys-clock-req-active-high;
};
+ padctl@0,7009f000 {
+ pinctrl-0 = <&padctl_default>;
+ pinctrl-names = "default";
+
+ padctl_default: pinmux {
+ usb3 {
+ nvidia,lanes = "pcie-0", "pcie-1";
+ nvidia,function = "usb3";
+ nvidia,iddq = <0>;
+ };
+
+ pcie {
+ nvidia,lanes = "pcie-2", "pcie-3",
+ "pcie-4";
+ nvidia,function = "pcie";
+ nvidia,iddq = <0>;
+ };
+
+ sata {
+ nvidia,lanes = "sata-0";
+ nvidia,function = "sata";
+ nvidia,iddq = <0>;
+ };
+ };
+ };
+
/* SD card */
sdhci@0,700b0400 {
status = "okay";
@@ -1633,6 +1659,7 @@
sdhci@0,700b0600 {
status = "okay";
bus-width = <8>;
+ non-removable;
};
ahub@0,70300000 {
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index f0bb842..70ad91d 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -682,7 +682,7 @@
regulator-max-microamp = <3500000>;
regulator-always-on;
regulator-boot-on;
- ams,external-control = <2>;
+ ams,ext-control = <2>;
};
sd1 {
@@ -693,7 +693,7 @@
regulator-max-microamp = <2500000>;
regulator-always-on;
regulator-boot-on;
- ams,external-control = <1>;
+ ams,ext-control = <1>;
};
vdd_1v35_lp0: sd2 {
@@ -742,7 +742,7 @@
regulator-max-microvolt = <1050000>;
regulator-boot-on;
regulator-always-on;
- ams,external-control = <1>;
+ ams,ext-control = <1>;
};
ldo1 {
@@ -816,7 +816,7 @@
spi@0,7000d400 {
status = "okay";
- cros-ec@0 {
+ cros_ec: cros-ec@0 {
compatible = "google,cros-ec-spi";
spi-max-frequency = <4000000>;
interrupt-parent = <&gpio>;
@@ -825,96 +825,30 @@
google,cros-ec-spi-msg-delay = <2000>;
- cros-ec-keyb {
- compatible = "google,cros-ec-keyb";
- keypad,num-rows = <8>;
- keypad,num-columns = <13>;
- google,needs-ghost-filter;
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
- linux,keymap = <
- MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
- MATRIX_KEY(0x00, 0x02, KEY_F1)
- MATRIX_KEY(0x00, 0x03, KEY_B)
- MATRIX_KEY(0x00, 0x04, KEY_F10)
- MATRIX_KEY(0x00, 0x06, KEY_N)
- MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
- MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+ google,remote-bus = <0>;
- MATRIX_KEY(0x01, 0x01, KEY_ESC)
- MATRIX_KEY(0x01, 0x02, KEY_F4)
- MATRIX_KEY(0x01, 0x03, KEY_G)
- MATRIX_KEY(0x01, 0x04, KEY_F7)
- MATRIX_KEY(0x01, 0x06, KEY_H)
- MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
- MATRIX_KEY(0x01, 0x09, KEY_F9)
- MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+ charger: bq24735@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ ti,ac-detect-gpios = <&gpio
+ TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ };
- MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
- MATRIX_KEY(0x02, 0x01, KEY_TAB)
- MATRIX_KEY(0x02, 0x02, KEY_F3)
- MATRIX_KEY(0x02, 0x03, KEY_T)
- MATRIX_KEY(0x02, 0x04, KEY_F6)
- MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
- MATRIX_KEY(0x02, 0x06, KEY_Y)
- MATRIX_KEY(0x02, 0x07, KEY_102ND)
- MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
- MATRIX_KEY(0x02, 0x09, KEY_F8)
-
- MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
- MATRIX_KEY(0x03, 0x02, KEY_F2)
- MATRIX_KEY(0x03, 0x03, KEY_5)
- MATRIX_KEY(0x03, 0x04, KEY_F5)
- MATRIX_KEY(0x03, 0x06, KEY_6)
- MATRIX_KEY(0x03, 0x08, KEY_MINUS)
- MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
-
- MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
- MATRIX_KEY(0x04, 0x01, KEY_A)
- MATRIX_KEY(0x04, 0x02, KEY_D)
- MATRIX_KEY(0x04, 0x03, KEY_F)
- MATRIX_KEY(0x04, 0x04, KEY_S)
- MATRIX_KEY(0x04, 0x05, KEY_K)
- MATRIX_KEY(0x04, 0x06, KEY_J)
- MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
- MATRIX_KEY(0x04, 0x09, KEY_L)
- MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
- MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
-
- MATRIX_KEY(0x05, 0x01, KEY_Z)
- MATRIX_KEY(0x05, 0x02, KEY_C)
- MATRIX_KEY(0x05, 0x03, KEY_V)
- MATRIX_KEY(0x05, 0x04, KEY_X)
- MATRIX_KEY(0x05, 0x05, KEY_COMMA)
- MATRIX_KEY(0x05, 0x06, KEY_M)
- MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
- MATRIX_KEY(0x05, 0x08, KEY_SLASH)
- MATRIX_KEY(0x05, 0x09, KEY_DOT)
- MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
-
- MATRIX_KEY(0x06, 0x01, KEY_1)
- MATRIX_KEY(0x06, 0x02, KEY_3)
- MATRIX_KEY(0x06, 0x03, KEY_4)
- MATRIX_KEY(0x06, 0x04, KEY_2)
- MATRIX_KEY(0x06, 0x05, KEY_8)
- MATRIX_KEY(0x06, 0x06, KEY_7)
- MATRIX_KEY(0x06, 0x08, KEY_0)
- MATRIX_KEY(0x06, 0x09, KEY_9)
- MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
- MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
- MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
-
- MATRIX_KEY(0x07, 0x01, KEY_Q)
- MATRIX_KEY(0x07, 0x02, KEY_E)
- MATRIX_KEY(0x07, 0x03, KEY_R)
- MATRIX_KEY(0x07, 0x04, KEY_W)
- MATRIX_KEY(0x07, 0x05, KEY_I)
- MATRIX_KEY(0x07, 0x06, KEY_U)
- MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
- MATRIX_KEY(0x07, 0x08, KEY_P)
- MATRIX_KEY(0x07, 0x09, KEY_O)
- MATRIX_KEY(0x07, 0x0b, KEY_UP)
- MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
- >;
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <1>;
+ };
};
};
};
@@ -940,6 +874,10 @@
nvidia,sys-clock-req-active-high;
};
+ hda@0,70030000 {
+ status = "okay";
+ };
+
sdhci@0,700b0400 {
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -1205,3 +1143,5 @@
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 6e6bc4e..3af46d3 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -1,6 +1,7 @@
#include <dt-bindings/clock/tegra124-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
@@ -102,6 +103,21 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ gpu@0,57000000 {
+ compatible = "nvidia,gk20a";
+ reg = <0x0 0x57000000 0x0 0x01000000>,
+ <0x0 0x58000000 0x0 0x01000000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "stall", "nonstall";
+ clocks = <&tegra_car TEGRA124_CLK_GPU>,
+ <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+ clock-names = "gpu", "pwr";
+ resets = <&tegra_car 184>;
+ reset-names = "gpu";
+ status = "disabled";
+ };
+
timer@0,60005000 {
compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
reg = <0x0 0x60005000 0x0 0x400>;
@@ -179,6 +195,12 @@
#dma-cells = <1>;
};
+ apbmisc@0,70000800 {
+ compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+ reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */
+ <0x0 0x7000E864 0x0 0x04>; /* Strapping options */
+ };
+
pinmux: pinmux@0,70000868 {
compatible = "nvidia,tegra124-pinmux";
reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
@@ -449,6 +471,39 @@
clock-names = "pclk", "clk32k_in";
};
+ fuse@0,7000f800 {
+ compatible = "nvidia,tegra124-efuse";
+ reg = <0x0 0x7000f800 0x0 0x400>;
+ clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
+ hda@0,70030000 {
+ compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
+ reg = <0x0 0x70030000 0x0 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_HDA>,
+ <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+ <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+ clock-names = "hda", "hda2hdmi", "hdacodec_2x";
+ resets = <&tegra_car 125>, /* hda */
+ <&tegra_car 128>, /* hda2hdmi */
+ <&tegra_car 111>; /* hda2codec_2x */
+ reset-names = "hda", "hda2hdmi", "hdacodec_2x";
+ status = "disabled";
+ };
+
+ padctl: padctl@0,7009f000 {
+ compatible = "nvidia,tegra124-xusb-padctl";
+ reg = <0x0 0x7009f000 0x0 0x1000>;
+ resets = <&tegra_car 142>;
+ reset-names = "padctl";
+
+ #phy-cells = <1>;
+ };
+
sdhci@0,700b0000 {
compatible = "nvidia,tegra124-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index 6d3a4cb..1b7c56b 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -10,6 +10,15 @@
status = "okay";
};
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+ };
+
i2c@7000c000 {
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
@@ -30,7 +39,7 @@
};
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 5000000>;
@@ -38,6 +47,15 @@
default-brightness-level = <6>;
};
+ panel: panel {
+ compatible = "innolux,n156bge-l21", "simple-panel";
+
+ power-supply = <&vdd_1v8_reg>, <&vdd_3v3_reg>;
+ enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+ backlight = <&backlight>;
+ };
+
sound {
compatible = "ad,tegra-audio-wm8903-medcom-wide",
"nvidia,tegra-audio-wm8903";
@@ -64,4 +82,45 @@
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ regulators {
+ vcc_24v_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "vcc_24v";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
+
+ vdd_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "vdd_5v0";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ reg = <102>;
+ regulator-name = "vdd_3v3";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_1v8_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
+ regulator-name = "vdd_1v8";
+ vin-supply = <&vdd_3v3_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 29051a2..a10b415 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -58,4 +58,45 @@
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ regulators {
+ vcc_24v_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "vcc_24v";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
+
+ vdd_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "vdd_5v0";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ reg = <102>;
+ regulator-name = "vdd_3v3";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_1v8_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
+ regulator-name = "vdd_1v8";
+ vin-supply = <&vdd_3v3_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index a1b0d96..9c83185 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -334,6 +334,7 @@
#gpio-cells = <2>;
gpio-controller;
+ /* vdd_5v0_reg must be provided by the base board */
sys-supply = <&vdd_5v0_reg>;
vin-sm0-supply = <&sys_reg>;
vin-sm1-supply = <&sys_reg>;
@@ -511,15 +512,6 @@
#address-cells = <1>;
#size-cells = <0>;
- vdd_5v0_reg: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
pci_vdd_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 890562c..c12d8be 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -67,4 +67,45 @@
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
+
+ regulators {
+ vcc_24v_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "vcc_24v";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
+
+ vdd_5v0_reg: regulator@101 {
+ compatible = "regulator-fixed";
+ reg = <101>;
+ regulator-name = "vdd_5v0";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_3v3_reg: regulator@102 {
+ compatible = "regulator-fixed";
+ reg = <102>;
+ regulator-name = "vdd_3v3";
+ vin-supply = <&vcc_24v_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_1v8_reg: regulator@103 {
+ compatible = "regulator-fixed";
+ reg = <103>;
+ regulator-name = "vdd_1v8";
+ vin-supply = <&vdd_3v3_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index a7ddf70..243d84c 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -236,6 +236,12 @@
interrupt-controller;
};
+ apbmisc@70000800 {
+ compatible = "nvidia,tegra20-apbmisc";
+ reg = <0x70000800 0x64 /* Chip revision */
+ 0x70000008 0x04>; /* Strapping options */
+ };
+
pinmux: pinmux@70000014 {
compatible = "nvidia,tegra20-pinmux";
reg = <0x70000014 0x10 /* Tri-state registers */
@@ -545,6 +551,15 @@
#size-cells = <0>;
};
+ fuse@7000f800 {
+ compatible = "nvidia,tegra20-efuse";
+ reg = <0x7000F800 0x400>;
+ clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
pcie-controller@80003000 {
compatible = "nvidia,tegra20-pcie";
device_type = "pci";
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
new file mode 100644
index 0000000..9921433
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -0,0 +1,260 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis.dtsi"
+
+/ {
+ model = "Toradex Apalis T30 on Apalis Evaluation Board";
+ compatible = "toradex,apalis_t30-eval", "nvidia,tegra30";
+
+ aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/tps65911@2d";
+ rtc2 = "/rtc@7000e000";
+ };
+
+ pcie-controller@00003000 {
+ status = "okay";
+
+ pci@1,0 {
+ status = "okay";
+ };
+
+ pci@2,0 {
+ status = "okay";
+ };
+
+ pci@3,0 {
+ status = "okay";
+ };
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+ hdmi@54280000 {
+ status = "okay";
+ };
+ };
+
+ serial@70006000 {
+ status = "okay";
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pcie-switch@58 {
+ compatible = "plx,pex8605";
+ reg = <0x58>;
+ };
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t00";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /*
+ * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+ * carrier board)
+ */
+ cami2c: i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+ hdmiddc: i2c@7000c700 {
+ status = "okay";
+ };
+
+ /* SPI1: Apalis SPI1 */
+ spi@7000d400 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spidev0: spidev@1 {
+ compatible = "spidev";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ };
+ };
+
+ /* SPI5: Apalis SPI2 */
+ spi@7000dc00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spidev1: spidev@2 {
+ compatible = "spidev";
+ reg = <2>;
+ spi-max-frequency = <25000000>;
+ };
+ };
+
+ sd1: sdhci@78000000 {
+ status = "okay";
+ bus-width = <4>;
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ mmc1: sdhci@78000400 {
+ status = "okay";
+ bus-width = <8>;
+ /* MMC1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+ usb@7d000000 {
+ status = "okay";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ vbus-supply = <&usbo1_vbus_reg>;
+ };
+
+ /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+ usb@7d004000 {
+ status = "okay";
+ };
+
+ usb-phy@7d004000 {
+ status = "okay";
+ vbus-supply = <&usbh_vbus_reg>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ vbus-supply = <&usbh_vbus_reg>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ /* PWM0 */
+ pwms = <&pwm 0 5000000>;
+ brightness-levels = <255 231 223 207 191 159 127 0>;
+ default-brightness-level = <6>;
+ /* BKL1_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+
+ backlight = <&backlight>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ pwm1 {
+ label = "PWM1";
+ pwms = <&pwm 3 19600>;
+ max-brightness = <255>;
+ };
+
+ pwm2 {
+ label = "PWM2";
+ pwms = <&pwm 2 19600>;
+ max-brightness = <255>;
+ };
+
+ pwm3 {
+ label = "PWM3";
+ pwms = <&pwm 1 19600>;
+ max-brightness = <255>;
+ };
+ };
+
+ regulators {
+ sys_5v0_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ /* USBO1_EN */
+ usbo1_vbus_reg: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "usbo1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&sys_5v0_reg>;
+ };
+
+ /* USBH_EN */
+ usbh_vbus_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usbh_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&sys_5v0_reg>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
new file mode 100644
index 0000000..8adaa78
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -0,0 +1,678 @@
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Device Tree
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
+ */
+/ {
+ model = "Toradex Apalis T30";
+ compatible = "toradex,apalis_t30", "nvidia,tegra30";
+
+ pcie-controller@00003000 {
+ avdd-pexa-supply = <&vdd2_reg>;
+ vdd-pexa-supply = <&vdd2_reg>;
+ avdd-pexb-supply = <&vdd2_reg>;
+ vdd-pexb-supply = <&vdd2_reg>;
+ avdd-pex-pll-supply = <&vdd2_reg>;
+ avdd-plle-supply = <&ldo6_reg>;
+ vddio-pex-ctl-supply = <&sys_3v3_reg>;
+ hvdd-pex-supply = <&sys_3v3_reg>;
+
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <1>;
+ };
+
+ pci@3,0 {
+ nvidia,num-lanes = <1>;
+ };
+ };
+
+ host1x@50000000 {
+ hdmi@54280000 {
+ vdd-supply = <&sys_3v3_reg>;
+ pll-supply = <&vio_reg>;
+
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmiddc>;
+ };
+ };
+
+ pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* Apalis BKL1_ON */
+ pv2 {
+ nvidia,pins = "pv2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis BKL1_PWM */
+ uart3_rts_n_pc0 {
+ nvidia,pins = "uart3_rts_n_pc0";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+ uart3_cts_n_pa1 {
+ nvidia,pins = "uart3_cts_n_pa1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis CAN1 on SPI6 */
+ spi2_cs0_n_px3 {
+ nvidia,pins = "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* CAN_INT1 */
+ spi2_cs1_n_pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis CAN2 on SPI4 */
+ gmi_a16_pj7 {
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* CAN_INT2 */
+ spi2_cs2_n_pw3 {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C3 */
+ cam_i2c_scl_pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis MMC1 */
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6",
+ "sdmmc3_cmd_pa7";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3_dat0_pb7 {
+ nvidia,pins = "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_dat4_pd1",
+ "sdmmc3_dat5_pd0",
+ "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis MMC1_CD# */
+ pv3 {
+ nvidia,pins = "pv3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis PWM1 */
+ gpio_pu6 {
+ nvidia,pins = "gpio_pu6";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM2 */
+ gpio_pu5 {
+ nvidia,pins = "gpio_pu5";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM3 */
+ gpio_pu4 {
+ nvidia,pins = "gpio_pu4";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM4 */
+ gpio_pu3 {
+ nvidia,pins = "gpio_pu3";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis RESET_MOCI# */
+ gmi_rst_n_pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SD1 */
+ sdmmc1_clk_pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc1_cmd_pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis SD1_CD# */
+ clk2_req_pcc5 {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPI1 */
+ spi1_sck_px5 {
+ nvidia,pins = "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_miso_px7",
+ "spi1_cs0_n_px6";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SPI2 */
+ lcd_sck_pz4 {
+ nvidia,pins = "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_sdin_pz2",
+ "lcd_cs0_n_pn4";
+ nvidia,function = "spi5";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART1 */
+ ulpi_data0 {
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART2 */
+ ulpi_clk_py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART3 */
+ uart2_rxd_pc3 {
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_txd_pc2";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART4 */
+ uart3_rxd_pw7 {
+ nvidia,pins = "uart3_rxd_pw7",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBO1_EN */
+ gen2_i2c_scl_pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBO1_OC# */
+ gen2_i2c_sda_pt6 {
+ nvidia,pins = "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis WAKE1_MICO */
+ pv1 {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* eMMC (On-module) */
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* LVDS Transceiver Configuration */
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pbb7",
+ "pcc1",
+ "pcc2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Power I2C (On-module) */
+ pwr_i2c_scl_pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,lock = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * THERMD_ALERT#, unlatched I2C address pin of LM95245
+ * temperature sensor therefore requires disabling for
+ * now
+ */
+ lcd_dc1_pd2 {
+ nvidia,pins = "lcd_dc1_pd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* TOUCH_PEN_INT# */
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+
+ hdmiddc: i2c@7000c700 {
+ clock-frequency = <100000>;
+ };
+
+ /*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic: tps65911@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <&sys_3v3_reg>;
+ vcc2-supply = <&sys_3v3_reg>;
+ vcc3-supply = <&vio_reg>;
+ vcc4-supply = <&sys_3v3_reg>;
+ vcc5-supply = <&sys_3v3_reg>;
+ vcc6-supply = <&vio_reg>;
+ vcc7-supply = <&sys_5v0_reg>;
+ vccio-supply = <&sys_3v3_reg>;
+
+ regulators {
+ /* SW1: +V1.35_VDDIO_DDR */
+ vdd1_reg: vdd1 {
+ regulator-name = "vddio_ddr_1v35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ /* SW2: +V1.05 */
+ vdd2_reg: vdd2 {
+ regulator-name =
+ "vdd_pexa,vdd_pexb,vdd_sata";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ /* SW CTRL: +V1.0_VDD_CPU */
+ vddctrl_reg: vddctrl {
+ regulator-name = "vdd_cpu,vdd_sys";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ /* SWIO: +V1.8 */
+ vio_reg: vio {
+ regulator-name = "vdd_1v8_gen";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /* LDO1: unused */
+
+ /*
+ * EN_+V3.3 switching via FET:
+ * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+ * see also v3_3 fixed supply
+ */
+ ldo2_reg: ldo2 {
+ regulator-name = "en_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* +V1.2_CSI */
+ ldo3_reg: ldo3 {
+ regulator-name =
+ "avdd_dsi_csi,pwrdet_mipi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ /* +V1.2_VDD_RTC */
+ ldo4_reg: ldo4 {
+ regulator-name = "vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V2.8_AVDD_VDAC:
+ * only required for analog RGB
+ */
+ ldo5_reg: ldo5 {
+ regulator-name = "avdd_vdac";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+ * but LDO6 can't set voltage in 50mV
+ * granularity
+ */
+ ldo6_reg: ldo6 {
+ regulator-name = "avdd_plle";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ /* +V1.2_AVDD_PLL */
+ ldo7_reg: ldo7 {
+ regulator-name = "avdd_pll";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /* +V1.0_VDD_DDR_HS */
+ ldo8_reg: ldo8 {
+ regulator-name = "vdd_ddr_hs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ /* STMPE811 touch screen controller */
+ stmpe811@41 {
+ compatible = "st,stmpe811";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+ };
+
+ /*
+ * LM95245 temperature sensor
+ * Note: OVERT_N directly connected to PMIC PWRDN
+ */
+ temp-sensor@4c {
+ compatible = "national,lm95245";
+ reg = <0x4c>;
+ };
+
+ /* SW: +V1.2_VDD_CORE */
+ tps62362@60 {
+ compatible = "ti,tps62362";
+ reg = <0x60>;
+
+ regulator-name = "tps62362-vout";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-low;
+ /* VSEL1: EN_CORE_DVFS_N low for DVFS */
+ ti,vsel1-state-low;
+ };
+ };
+
+ /* SPI4: CAN2 */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ /* SPI6: CAN1 */
+ spi@7000de00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clk@0 {
+ compatible = "fixed-clock";
+ reg=<0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ clk16m: clk@1 {
+ compatible = "fixed-clock";
+ reg=<1>;
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ clock-output-names = "clk16m";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_3v3_reg: regulator@100 {
+ compatible = "regulator-fixed";
+ reg = <100>;
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index dec4fc8..0b1ede9 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -335,6 +335,12 @@
interrupt-controller;
};
+ apbmisc@70000800 {
+ compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
+ reg = <0x70000800 0x64 /* Chip revision */
+ 0x70000008 0x04>; /* Strapping options */
+ };
+
pinmux: pinmux@70000868 {
compatible = "nvidia,tegra30-pinmux";
reg = <0x70000868 0xd4 /* Pad control registers */
@@ -631,6 +637,15 @@
nvidia,ahb = <&ahb>;
};
+ fuse@7000f800 {
+ compatible = "nvidia,tegra30-efuse";
+ reg = <0x7000f800 0x400>;
+ clocks = <&tegra_car TEGRA30_CLK_FUSE>;
+ clock-names = "fuse";
+ resets = <&tegra_car 39>;
+ reset-names = "fuse";
+ };
+
ahub@70080000 {
compatible = "nvidia,tegra30-ahub";
reg = <0x70080000 0x200
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
index 0e6d3de..ce7138c 100644
--- a/arch/arm/boot/dts/tny_a9260_common.dtsi
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -24,6 +24,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
index 0751a6a..3043296 100644
--- a/arch/arm/boot/dts/tny_a9263.dts
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 2859776..12edafe 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -16,6 +16,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 290e603..68c0de3 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -29,6 +29,14 @@
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
+
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
};
ahb {
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 6cc314e..583dd36 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -14,6 +14,8 @@
/ {
aliases {
+ can0 = &can0;
+ can1 = &can1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@@ -103,6 +105,16 @@
<&clks VF610_CLK_DMAMUX1>;
};
+ can0: flexcan@40020000 {
+ compatible = "fsl,vf610-flexcan";
+ reg = <0x40020000 0x4000>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_FLEXCAN0>,
+ <&clks VF610_CLK_FLEXCAN0>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
@@ -362,7 +374,7 @@
esdhc1: esdhc@400b2000 {
compatible = "fsl,imx53-esdhc";
- reg = <0x400b2000 0x4000>;
+ reg = <0x400b2000 0x1000>;
interrupts = <0 28 0x04>;
clocks = <&clks VF610_CLK_IPG_BUS>,
<&clks VF610_CLK_PLATFORM_BUS>,
@@ -405,6 +417,17 @@
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
+
+ can1: flexcan@400d4000 {
+ compatible = "fsl,vf610-flexcan";
+ reg = <0x400d4000 0x4000>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_FLEXCAN1>,
+ <&clks VF610_CLK_FLEXCAN1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
};
};
};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 760bbc4..366ca64 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -65,6 +65,24 @@
interrupt-parent = <&intc>;
ranges;
+ adc@f8007100 {
+ compatible = "xlnx,zynq-xadc-1.00.a";
+ reg = <0xf8007100 0x20>;
+ interrupts = <0 7 4>;
+ interrupt-parent = <&intc>;
+ clocks = <&clkc 12>;
+ };
+
+ gpio0: gpio@e000a000 {
+ compatible = "xlnx,zynq-gpio-1.0";
+ #gpio-cells = <2>;
+ clocks = <&clkc 42>;
+ gpio-controller;
+ interrupt-parent = <&intc>;
+ interrupts = <0 20 4>;
+ reg = <0xe000a000 0x1000>;
+ };
+
i2c0: i2c@e0004000 {
compatible = "cdns,i2c-r1p10";
status = "disabled";
@@ -105,19 +123,19 @@
};
uart0: serial@e0000000 {
- compatible = "xlnx,xuartps";
+ compatible = "xlnx,xuartps", "cdns,uart-r1p8";
status = "disabled";
clocks = <&clkc 23>, <&clkc 40>;
- clock-names = "ref_clk", "aper_clk";
+ clock-names = "uart_clk", "pclk";
reg = <0xE0000000 0x1000>;
interrupts = <0 27 4>;
};
uart1: serial@e0001000 {
- compatible = "xlnx,xuartps";
+ compatible = "xlnx,xuartps", "cdns,uart-r1p8";
status = "disabled";
clocks = <&clkc 24>, <&clkc 41>;
- clock-names = "ref_clk", "aper_clk";
+ clock-names = "uart_clk", "pclk";
reg = <0xE0001000 0x1000>;
interrupts = <0 50 4>;
};
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index bada59d..63bde0e 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,6 +1,7 @@
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
@@ -35,10 +36,8 @@
CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_IMX27LITE=y
CONFIG_MACH_PCA100=y
CONFIG_MACH_MXT_TD60=y
-CONFIG_MACH_IMX27IPCAM=y
CONFIG_MACH_IMX27_DT=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
@@ -159,6 +158,8 @@
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 59b7e45..16cfec4 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,5 +1,6 @@
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=18
@@ -31,11 +32,12 @@
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
CONFIG_SOC_VF610=y
CONFIG_PCI=y
CONFIG_PCI_IMX6=y
@@ -67,6 +69,8 @@
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_CAN_FLEXCAN=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_RFKILL=y
@@ -160,6 +164,7 @@
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y
+CONFIG_GPIO_STMPE=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
@@ -242,6 +247,7 @@
CONFIG_DMADEVICES=y
CONFIG_IMX_SDMA=y
CONFIG_MXS_DMA=y
+CONFIG_FSL_EDMA=y
CONFIG_STAGING=y
CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_FB_HELPER=y
@@ -288,6 +294,7 @@
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 5348364..f70ea21 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -27,7 +27,7 @@
CONFIG_ARCH_HI3xxx=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index a9f9923..c7906c2 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,4 +1,5 @@
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 536a137..f650f00 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -180,6 +180,7 @@
CONFIG_MFD_SYSCON=y
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
+CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS65910=y
CONFIG_TWL6040_CORE=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -188,6 +189,7 @@
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
+CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_PBIAS=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 45b55e0..6cc6f7a 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -113,14 +113,12 @@
select HAVE_AT91_DBGU0
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
select HAVE_AT91_DBGU0
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
@@ -140,7 +138,6 @@
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
config SOC_AT91SAM9RL
@@ -155,7 +152,6 @@
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_UTMI
select HAVE_AT91_USB_CLK
help
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 787bb50..038702e 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -26,10 +26,11 @@
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -277,6 +278,9 @@
clk_register(&pck2);
clk_register(&pck3);
}
+#else
+#define at91rm9200_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index c3d22be..3477ba9 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -27,10 +27,11 @@
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -288,6 +289,9 @@
clk_register(&pck0);
clk_register(&pck1);
}
+#else
+#define at91sam9260_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f302905..c074653 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -25,10 +25,11 @@
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -280,6 +281,9 @@
clk_register(&pck2);
clk_register(&pck3);
}
+#else
+#define at91sam9263_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 9d3d544..0d5d857 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -25,10 +25,11 @@
#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -331,6 +332,9 @@
clk_register(&pck0);
clk_register(&pck1);
}
+#else
+#define at91sam9g45_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4b51857..2bc7b97 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -65,18 +65,8 @@
config ARCH_MXC_IOMUX_V3
bool
-config ARCH_MX1
- bool
-
-config ARCH_MX25
- bool
-
-config MACH_MX27
- bool
-
config SOC_IMX1
bool
- select ARCH_MX1
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -89,7 +79,6 @@
config SOC_IMX25
bool
- select ARCH_MX25
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
@@ -100,7 +89,6 @@
select ARCH_HAS_OPP
select CPU_ARM926T
select IMX_HAVE_IOMUX_V1
- select MACH_MX27
select MXC_AVIC
select PINCTRL_IMX27
@@ -119,18 +107,6 @@
select PINCTRL_IMX35
select SMP_ON_UP if SMP
-config SOC_IMX5
- bool
- select ARCH_HAS_OPP
- select ARCH_MXC_IOMUX_V3
- select MXC_TZIC
-
-config SOC_IMX51
- bool
- select HAVE_IMX_SRC
- select PINCTRL_IMX51
- select SOC_IMX5
-
if ARCH_MULTI_V4T
comment "MX1 platforms:"
@@ -366,15 +342,6 @@
This includes specific configurations for the board and its
peripherals.
-config MACH_IMX27LITE
- bool "LogicPD MX27 LITEKIT platform"
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX27
- help
- Include support for MX27 LITEKIT platform. This includes specific
- configurations for the board and its peripherals.
-
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
@@ -406,15 +373,6 @@
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
-config MACH_IMX27IPCAM
- bool "IMX27 IPCAM platform"
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMX_UART
- select SOC_IMX27
- help
- Include support for IMX27 IPCAM platform. This includes specific
- configurations for the board and its peripherals.
-
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
@@ -700,24 +658,29 @@
comment "Device tree only"
+config SOC_IMX5
+ bool
+ select ARCH_HAS_OPP
+ select HAVE_IMX_SRC
+ select MXC_TZIC
+
config SOC_IMX50
bool "i.MX50 support"
- select HAVE_IMX_SRC
select PINCTRL_IMX50
select SOC_IMX5
help
This enables support for Freescale i.MX50 processor.
-config MACH_IMX51_DT
+config SOC_IMX51
bool "i.MX51 support"
- select SOC_IMX51
+ select PINCTRL_IMX51
+ select SOC_IMX5
help
This enables support for Freescale i.MX51 processor
config SOC_IMX53
bool "i.MX53 support"
- select HAVE_IMX_SRC
select PINCTRL_IMX53
select SOC_IMX5
@@ -734,8 +697,6 @@
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select MFD_SYSCON
- select PL310_ERRATA_588369 if CACHE_L2X0
- select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
config SOC_IMX6Q
@@ -771,8 +732,6 @@
select ARM_GIC
select PINCTRL_VF610
select VF_PIT_TIMER
- select PL310_ERRATA_588369 if CACHE_L2X0
- select PL310_ERRATA_727915 if CACHE_L2X0
select PL310_ERRATA_769419 if CACHE_L2X0
help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index bbe93bb..ac88599 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -12,7 +12,7 @@
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o \
@@ -31,6 +31,8 @@
obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
+# i.MX6SX reuses i.MX6Q cpuidle driver
+obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6q.o
endif
ifdef CONFIG_SND_IMX_SOC
@@ -38,9 +40,6 @@
obj-y += ssi-fiq-ksym.o
endif
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
-
# i.MX1 based machines
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
@@ -60,13 +59,11 @@
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
-obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
# i.MX31 based machines
@@ -109,8 +106,8 @@
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
+obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 7f739be..37c307a 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -15,100 +15,103 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/clk.h>
-#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx1-clock.h>
#include "clk.h"
#include "common.h"
#include "hardware.h"
-/* CCM register addresses */
-#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
-
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_PCDR IO_ADDR_CCM(0x20)
-
-/* SCM register addresses */
-#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
-
-#define SCM_GCCR IO_ADDR_SCM(0xc)
-
static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m",
"prem", "fclk", };
-enum imx1_clks {
- dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate,
- spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko,
- uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate,
- usbd_gate, clk_max
-};
+static struct clk *clk[IMX1_CLK_MAX];
+static struct clk_onecell_data clk_data;
-static struct clk *clk[clk_max];
+static void __iomem *ccm __initdata;
+#define CCM_CSCR (ccm + 0x0000)
+#define CCM_MPCTL0 (ccm + 0x0004)
+#define CCM_SPCTL0 (ccm + 0x000c)
+#define CCM_PCDR (ccm + 0x0020)
+#define SCM_GCCR (ccm + 0x0810)
+
+static void __init _mx1_clocks_init(unsigned long fref)
+{
+ clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref);
+ clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000);
+ clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+ clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+ clk[IMX1_CLK_PREM] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks));
+ clk[IMX1_CLK_MPLL] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+ clk[IMX1_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+ clk[IMX1_CLK_SPLL] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+ clk[IMX1_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX1_CLK_MCU] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+ clk[IMX1_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
+ clk[IMX1_CLK_HCLK] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
+ clk[IMX1_CLK_CLK48M] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
+ clk[IMX1_CLK_PER1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
+ clk[IMX1_CLK_PER2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
+ clk[IMX1_CLK_PER3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
+ clk[IMX1_CLK_CLKO] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+ clk[IMX1_CLK_UART3_GATE] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
+ clk[IMX1_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
+ clk[IMX1_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
+ clk[IMX1_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
+ clk[IMX1_CLK_CSI_GATE] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+ clk[IMX1_CLK_MMA_GATE] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+ clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+}
int __init mx1_clocks_init(unsigned long fref)
{
- int i;
+ ccm = MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR);
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[clk32] = imx_clk_fixed("clk32", fref);
- clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
- clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
- clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
- clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
- ARRAY_SIZE(prem_sel_clks));
- clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
- clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
- clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
- clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
- clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
- clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1);
- clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4);
- clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3);
- clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4);
- clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4);
- clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7);
- clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
- ARRAY_SIZE(clko_sel_clks));
- clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6);
- clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5);
- clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4);
- clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3);
- clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
- clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
- clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+ _mx1_clocks_init(fref);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("imx1 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
- clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
- clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
- clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
- clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
- clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2");
- clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
- clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
- clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
- clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
- clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
- clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
- clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
- clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1");
+ clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2");
+ clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2");
+ clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1");
+ clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
+ clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
+
+static void __init mx1_clocks_init_dt(struct device_node *np)
+{
+ ccm = of_iomap(np, 0);
+ BUG_ON(!ccm);
+
+ _mx1_clocks_init(32768);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx1_ccm, "fsl,imx1-ccm", mx1_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index bdc2e46..4b4c753 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -7,178 +7,165 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
*/
#include <linux/clk.h>
-#include <linux/clkdev.h>
#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/err.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx21-clock.h>
#include "clk.h"
#include "common.h"
#include "hardware.h"
-#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+static void __iomem *ccm __initdata;
/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
+#define CCM_CSCR (ccm + 0x00)
+#define CCM_MPCTL0 (ccm + 0x04)
+#define CCM_SPCTL0 (ccm + 0x0c)
+#define CCM_PCDR0 (ccm + 0x18)
+#define CCM_PCDR1 (ccm + 0x1c)
+#define CCM_PCCR0 (ccm + 0x20)
+#define CCM_PCCR1 (ccm + 0x24)
-static const char *mpll_sel_clks[] = { "fpm", "ckih", };
-static const char *spll_sel_clks[] = { "fpm", "ckih", };
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
+static const char *mpll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *spll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", };
+static const char *ssi_sel_clks[] = { "spll_gate", "mpll_gate", };
-enum imx21_clks {
- ckil, ckih, fpm, mpll_sel, spll_sel, mpll, spll, fclk, hclk, ipg, per1,
- per2, per3, per4, uart1_ipg_gate, uart2_ipg_gate, uart3_ipg_gate,
- uart4_ipg_gate, gpt1_ipg_gate, gpt2_ipg_gate, gpt3_ipg_gate,
- pwm_ipg_gate, sdhc1_ipg_gate, sdhc2_ipg_gate, lcdc_ipg_gate,
- lcdc_hclk_gate, cspi3_ipg_gate, cspi2_ipg_gate, cspi1_ipg_gate,
- per4_gate, csi_hclk_gate, usb_div, usb_gate, usb_hclk_gate, ssi1_gate,
- ssi2_gate, nfc_div, nfc_gate, dma_gate, dma_hclk_gate, brom_gate,
- emma_gate, emma_hclk_gate, slcdc_gate, slcdc_hclk_gate, wdog_gate,
- gpio_gate, i2c_gate, kpp_gate, owire_gate, rtc_gate, clk_max
-};
+static struct clk *clk[IMX21_CLK_MAX];
+static struct clk_onecell_data clk_data;
-static struct clk *clk[clk_max];
+static void __init _mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+ BUG_ON(!ccm);
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
+ clk[IMX21_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX21_CLK_CKIL] = imx_obtain_fixed_clock("ckil", lref);
+ clk[IMX21_CLK_CKIH] = imx_obtain_fixed_clock("ckih", href);
+ clk[IMX21_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+ clk[IMX21_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+
+ clk[IMX21_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0);
+ clk[IMX21_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX21_CLK_FPM_GATE] = imx_clk_gate("fpm_gate", "fpm", CCM_CSCR, 2);
+ clk[IMX21_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+ clk[IMX21_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+ clk[IMX21_CLK_IPG] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+ clk[IMX21_CLK_HCLK] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+ clk[IMX21_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+ clk[IMX21_CLK_SPLL_SEL] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks, ARRAY_SIZE(spll_sel_clks));
+ clk[IMX21_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 19, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX21_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 20, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX21_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 26, 3);
+ clk[IMX21_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 29, 3);
+
+ clk[IMX21_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+
+ clk[IMX21_CLK_SPLL] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
+
+ clk[IMX21_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "fclk", CCM_PCDR0, 12, 4);
+ clk[IMX21_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[IMX21_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+
+ clk[IMX21_CLK_PER1] = imx_clk_divider("per1", "mpll_gate", CCM_PCDR1, 0, 6);
+ clk[IMX21_CLK_PER2] = imx_clk_divider("per2", "mpll_gate", CCM_PCDR1, 8, 6);
+ clk[IMX21_CLK_PER3] = imx_clk_divider("per3", "mpll_gate", CCM_PCDR1, 16, 6);
+ clk[IMX21_CLK_PER4] = imx_clk_divider("per4", "mpll_gate", CCM_PCDR1, 24, 6);
+
+ clk[IMX21_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[IMX21_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[IMX21_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[IMX21_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[IMX21_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[IMX21_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[IMX21_CLK_SSI1_GATE] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+ clk[IMX21_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+ clk[IMX21_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[IMX21_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+ clk[IMX21_CLK_GPIO_GATE] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+ clk[IMX21_CLK_I2C_GATE] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+ clk[IMX21_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+ clk[IMX21_CLK_USB_GATE] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+ clk[IMX21_CLK_EMMA_GATE] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+ clk[IMX21_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ipg", CCM_PCCR0, 16);
+ clk[IMX21_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ipg", CCM_PCCR0, 17);
+ clk[IMX21_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[IMX21_CLK_NFC_GATE] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+ clk[IMX21_CLK_SLCDC_HCLK_GATE] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+ clk[IMX21_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+ clk[IMX21_CLK_BMI_GATE] = imx_clk_gate("bmi_gate", "hclk", CCM_PCCR0, 23);
+ clk[IMX21_CLK_USB_HCLK_GATE] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+ clk[IMX21_CLK_SLCDC_GATE] = imx_clk_gate("slcdc_gate", "hclk", CCM_PCCR0, 25);
+ clk[IMX21_CLK_LCDC_HCLK_GATE] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+ clk[IMX21_CLK_EMMA_HCLK_GATE] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+ clk[IMX21_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+ clk[IMX21_CLK_DMA_HCLK_GATE] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+ clk[IMX21_CLK_CSI_HCLK_GATE] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+
+ clk[IMX21_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+ clk[IMX21_CLK_WDOG_GATE] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+ clk[IMX21_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[IMX21_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[IMX21_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[IMX21_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[IMX21_CLK_RTC_GATE] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+ clk[IMX21_CLK_KPP_GATE] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+ clk[IMX21_CLK_OWIRE_GATE] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+}
+
int __init mx21_clocks_init(unsigned long lref, unsigned long href)
{
- int i;
+ ccm = ioremap(MX21_CCM_BASE_ADDR, SZ_2K);
- clk[ckil] = imx_clk_fixed("ckil", lref);
- clk[ckih] = imx_clk_fixed("ckih", href);
- clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
- clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
- ARRAY_SIZE(mpll_sel_clks));
- clk[spll_sel] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks,
- ARRAY_SIZE(spll_sel_clks));
- clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
- clk[spll] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
- clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 29, 3);
- clk[hclk] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
- clk[ipg] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
- clk[per1] = imx_clk_divider("per1", "mpll", CCM_PCDR1, 0, 6);
- clk[per2] = imx_clk_divider("per2", "mpll", CCM_PCDR1, 8, 6);
- clk[per3] = imx_clk_divider("per3", "mpll", CCM_PCDR1, 16, 6);
- clk[per4] = imx_clk_divider("per4", "mpll", CCM_PCDR1, 24, 6);
- clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
- clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
- clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
- clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
- clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
- clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
- clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
- clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
- clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
- clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
- clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
- clk[lcdc_hclk_gate] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
- clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
- clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
- clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
- clk[per4_gate] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
- clk[csi_hclk_gate] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
- clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 26, 3);
- clk[usb_gate] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
- clk[usb_hclk_gate] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
- clk[ssi1_gate] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
- clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
- clk[nfc_div] = imx_clk_divider("nfc_div", "ipg", CCM_PCDR0, 12, 4);
- clk[nfc_gate] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
- clk[dma_gate] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
- clk[dma_hclk_gate] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
- clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
- clk[emma_gate] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
- clk[emma_hclk_gate] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
- clk[slcdc_gate] = imx_clk_gate("slcdc_gate", "ipg", CCM_PCCR0, 25);
- clk[slcdc_hclk_gate] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
- clk[wdog_gate] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
- clk[gpio_gate] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
- clk[i2c_gate] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
- clk[kpp_gate] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
- clk[owire_gate] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
- clk[rtc_gate] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+ _mx21_clocks_init(lref, href);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX21 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- clk_register_clkdev(clk[per1], "per1", NULL);
- clk_register_clkdev(clk[per2], "per2", NULL);
- clk_register_clkdev(clk[per3], "per3", NULL);
- clk_register_clkdev(clk[per4], "per4", NULL);
- clk_register_clkdev(clk[per1], "per", "imx21-uart.0");
- clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[per1], "per", "imx21-uart.1");
- clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[per1], "per", "imx21-uart.2");
- clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[per1], "per", "imx21-uart.3");
- clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
- clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
- clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
- clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
- clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
- clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
- clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
- clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
- clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
- clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
- clk_register_clkdev(clk[per3], "per", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
- clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
- clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0");
- clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma");
- clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma");
- clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
- clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[brom_gate], "brom", NULL);
- clk_register_clkdev(clk[emma_gate], "emma", NULL);
- clk_register_clkdev(clk[slcdc_gate], "slcdc", NULL);
- clk_register_clkdev(clk[gpio_gate], "gpio", NULL);
- clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
- clk_register_clkdev(clk[csi_hclk_gate], "csi", NULL);
- clk_register_clkdev(clk[ssi1_gate], "ssi1", NULL);
- clk_register_clkdev(clk[ssi2_gate], "ssi2", NULL);
- clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
- clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX21_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX21_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX21_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX21_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX21_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.0");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI1_IPG_GATE], "ipg", "imx21-cspi.0");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.1");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI2_IPG_GATE], "ipg", "imx21-cspi.1");
+ clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.2");
+ clk_register_clkdev(clk[IMX21_CLK_CSPI3_IPG_GATE], "ipg", "imx21-cspi.2");
+ clk_register_clkdev(clk[IMX21_CLK_PER3], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_LCDC_HCLK_GATE], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX21_CLK_USB_GATE], "per", "imx21-hcd.0");
+ clk_register_clkdev(clk[IMX21_CLK_USB_HCLK_GATE], "ahb", "imx21-hcd.0");
+ clk_register_clkdev(clk[IMX21_CLK_NFC_GATE], NULL, "imx21-nand.0");
+ clk_register_clkdev(clk[IMX21_CLK_DMA_HCLK_GATE], "ahb", "imx21-dma");
+ clk_register_clkdev(clk[IMX21_CLK_DMA_GATE], "ipg", "imx21-dma");
+ clk_register_clkdev(clk[IMX21_CLK_WDOG_GATE], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[IMX21_CLK_I2C_GATE], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[IMX21_CLK_OWIRE_GATE], NULL, "mxc_w1.0");
mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
return 0;
}
+
+static void __init mx21_clocks_init_dt(struct device_node *np)
+{
+ ccm = of_iomap(np, 0);
+
+ _mx21_clocks_init(32768, 26000000);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx21-ccm", mx21_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index ae578c0..59c0c85 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -32,8 +32,6 @@
#include "hardware.h"
#include "mx25.h"
-#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
#define CCM_MPCTL 0x00
#define CCM_UPCTL 0x04
#define CCM_CCTL 0x08
@@ -56,7 +54,7 @@
#define CCM_LTR3 0x4c
#define CCM_MCR 0x64
-#define ccm(x) (CRM_BASE + (x))
+#define ccm(x) (ccm_base + (x))
static struct clk_onecell_data clk_data;
@@ -91,9 +89,10 @@
static struct clk *clk[clk_max];
-static int __init __mx25_clocks_init(unsigned long osc_rate)
+static int __init __mx25_clocks_init(unsigned long osc_rate,
+ void __iomem *ccm_base)
{
- int i;
+ BUG_ON(!ccm_base);
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[osc] = imx_clk_fixed("osc", osc_rate);
@@ -224,19 +223,13 @@
/* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX25 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_prepare_enable(clk[emi_ahb]);
/* Clock source for gpt must be derived from AHB */
clk_set_parent(clk[per5_sel], clk[ahb]);
- clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-
/*
* Let's initially set up CLKO parent as ipg, since this configuration
* is used on some imx25 board designs to clock the audio codec.
@@ -248,8 +241,14 @@
int __init mx25_clocks_init(void)
{
- __mx25_clocks_init(24000000);
+ void __iomem *ccm;
+ ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
+
+ __mx25_clocks_init(24000000, ccm);
+
+ clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
/* i.mx25 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
@@ -314,29 +313,27 @@
return 0;
}
-int __init mx25_clocks_init_dt(void)
+static void __init mx25_clocks_init_dt(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *refnp;
unsigned long osc_rate = 24000000;
+ void __iomem *ccm;
/* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(np, NULL, "fixed-clock") {
+ for_each_compatible_node(refnp, NULL, "fixed-clock") {
u32 rate;
- if (of_property_read_u32(np, "clock-frequency", &rate))
+ if (of_property_read_u32(refnp, "clock-frequency", &rate))
continue;
- if (of_device_is_compatible(np, "fsl,imx-osc"))
+ if (of_device_is_compatible(refnp, "fsl,imx-osc"))
osc_rate = rate;
}
- np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+ ccm = of_iomap(np, 0);
+ __mx25_clocks_init(osc_rate, ccm);
+
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-
- __mx25_clocks_init(osc_rate);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"));
-
- return 0;
}
+CLK_OF_DECLARE(imx25_ccm, "fsl,imx25-ccm", mx25_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 317a662..ab6349e 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -1,61 +1,36 @@
#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
+#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <linux/clk-provider.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/imx27-clock.h>
#include "clk.h"
#include "common.h"
#include "hardware.h"
-#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+static void __iomem *ccm __initdata;
/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS (1 << 31)
-#define CCM_CSCR_SSI2 (1 << 23)
-#define CCM_CSCR_SSI1 (1 << 22)
-#define CCM_CSCR_VPU (1 << 21)
-#define CCM_CSCR_MSHC (1 << 20)
-#define CCM_CSCR_SPLLRES (1 << 19)
-#define CCM_CSCR_MPLLRES (1 << 18)
-#define CCM_CSCR_SP (1 << 17)
-#define CCM_CSCR_MCU (1 << 16)
-#define CCM_CSCR_OSC26MDIV (1 << 4)
-#define CCM_CSCR_OSC26M (1 << 3)
-#define CCM_CSCR_FPM (1 << 2)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC (1 << 15)
-
-#define CCM_SPCTL1_LF (1 << 15)
-#define CCM_SPCTL1_BRMO (1 << 6)
+#define CCM_CSCR (ccm + 0x00)
+#define CCM_MPCTL0 (ccm + 0x04)
+#define CCM_MPCTL1 (ccm + 0x08)
+#define CCM_SPCTL0 (ccm + 0x0c)
+#define CCM_SPCTL1 (ccm + 0x10)
+#define CCM_PCDR0 (ccm + 0x18)
+#define CCM_PCDR1 (ccm + 0x1c)
+#define CCM_PCCR0 (ccm + 0x20)
+#define CCM_PCCR1 (ccm + 0x24)
+#define CCM_CCSR (ccm + 0x28)
static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", };
-static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", };
+static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", };
static const char *clko_sel_clks[] = {
- "ckil", "fpm", "ckih", "ckih",
- "ckih", "mpll", "spll", "cpu_div",
+ "ckil", "fpm", "ckih_gate", "ckih_gate",
+ "ckih_gate", "mpll", "spll", "cpu_div",
"ahb", "ipg", "per1_div", "per2_div",
"per3_div", "per4_div", "ssi1_div", "ssi2_div",
"nfc_div", "mshc_div", "vpu_div", "60m",
@@ -64,239 +39,220 @@
static const char *ssi_sel_clks[] = { "spll_gate", "mpll", };
-enum mx27_clks {
- dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
- per2_div, per3_div, per4_div, vpu_sel, vpu_div, usb_div, cpu_sel,
- clko_sel, cpu_div, clko_div, ssi1_sel, ssi2_sel, ssi1_div, ssi2_div,
- clko_en, ssi2_ipg_gate, ssi1_ipg_gate, slcdc_ipg_gate, sdhc3_ipg_gate,
- sdhc2_ipg_gate, sdhc1_ipg_gate, scc_ipg_gate, sahara_ipg_gate,
- rtc_ipg_gate, pwm_ipg_gate, owire_ipg_gate, lcdc_ipg_gate,
- kpp_ipg_gate, iim_ipg_gate, i2c2_ipg_gate, i2c1_ipg_gate,
- gpt6_ipg_gate, gpt5_ipg_gate, gpt4_ipg_gate, gpt3_ipg_gate,
- gpt2_ipg_gate, gpt1_ipg_gate, gpio_ipg_gate, fec_ipg_gate,
- emma_ipg_gate, dma_ipg_gate, cspi3_ipg_gate, cspi2_ipg_gate,
- cspi1_ipg_gate, nfc_baud_gate, ssi2_baud_gate, ssi1_baud_gate,
- vpu_baud_gate, per4_gate, per3_gate, per2_gate, per1_gate,
- usb_ahb_gate, slcdc_ahb_gate, sahara_ahb_gate, lcdc_ahb_gate,
- vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate,
- csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
- uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
- uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel,
- mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate,
- rtic_ahb_gate, mshc_baud_gate, clk_max
-};
-
-static struct clk *clk[clk_max];
+static struct clk *clk[IMX27_CLK_MAX];
static struct clk_onecell_data clk_data;
+static void __init _mx27_clocks_init(unsigned long fref)
+{
+ BUG_ON(!ccm);
+
+ clk[IMX27_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX27_CLK_CKIH] = imx_clk_fixed("ckih", fref);
+ clk[IMX27_CLK_CKIL] = imx_clk_fixed("ckil", 32768);
+ clk[IMX27_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
+ clk[IMX27_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3);
+ clk[IMX27_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3);
+ clk[IMX27_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks));
+ clk[IMX27_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks));
+ clk[IMX27_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+ clk[IMX27_CLK_SPLL] = imx_clk_pllv1("spll", "ckih_gate", CCM_SPCTL0);
+ clk[IMX27_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
+ clk[IMX27_CLK_MPLL_MAIN2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
+
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
+ clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
+ clk[IMX27_CLK_IPG] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+ } else {
+ clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
+ clk[IMX27_CLK_IPG] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
+ }
+
+ clk[IMX27_CLK_MSHC_DIV] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
+ clk[IMX27_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
+ clk[IMX27_CLK_PER1_DIV] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
+ clk[IMX27_CLK_PER2_DIV] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
+ clk[IMX27_CLK_PER3_DIV] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
+ clk[IMX27_CLK_PER4_DIV] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
+ clk[IMX27_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
+ clk[IMX27_CLK_VPU_DIV] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
+ clk[IMX27_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
+ clk[IMX27_CLK_CPU_SEL] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+ clk[IMX27_CLK_CLKO_SEL] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
+ clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
+ else
+ clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
+
+ clk[IMX27_CLK_CLKO_DIV] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
+ clk[IMX27_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX27_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[IMX27_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[IMX27_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
+ clk[IMX27_CLK_CLKO_EN] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
+ clk[IMX27_CLK_SSI2_IPG_GATE] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[IMX27_CLK_SSI1_IPG_GATE] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[IMX27_CLK_SLCDC_IPG_GATE] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[IMX27_CLK_SDHC3_IPG_GATE] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[IMX27_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[IMX27_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[IMX27_CLK_SCC_IPG_GATE] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
+ clk[IMX27_CLK_SAHARA_IPG_GATE] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+ clk[IMX27_CLK_RTIC_IPG_GATE] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
+ clk[IMX27_CLK_RTC_IPG_GATE] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[IMX27_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
+ clk[IMX27_CLK_OWIRE_IPG_GATE] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+ clk[IMX27_CLK_MSHC_IPG_GATE] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
+ clk[IMX27_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
+ clk[IMX27_CLK_KPP_IPG_GATE] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
+ clk[IMX27_CLK_IIM_IPG_GATE] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
+ clk[IMX27_CLK_I2C2_IPG_GATE] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
+ clk[IMX27_CLK_I2C1_IPG_GATE] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[IMX27_CLK_GPT6_IPG_GATE] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
+ clk[IMX27_CLK_GPT5_IPG_GATE] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
+ clk[IMX27_CLK_GPT4_IPG_GATE] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
+ clk[IMX27_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
+ clk[IMX27_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
+ clk[IMX27_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
+ clk[IMX27_CLK_GPIO_IPG_GATE] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
+ clk[IMX27_CLK_FEC_IPG_GATE] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
+ clk[IMX27_CLK_EMMA_IPG_GATE] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
+ clk[IMX27_CLK_DMA_IPG_GATE] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
+ clk[IMX27_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
+ clk[IMX27_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
+ clk[IMX27_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+ clk[IMX27_CLK_MSHC_BAUD_GATE] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
+ clk[IMX27_CLK_NFC_BAUD_GATE] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
+ clk[IMX27_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
+ clk[IMX27_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
+ clk[IMX27_CLK_VPU_BAUD_GATE] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
+ clk[IMX27_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
+ clk[IMX27_CLK_PER3_GATE] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
+ clk[IMX27_CLK_PER2_GATE] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
+ clk[IMX27_CLK_PER1_GATE] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
+ clk[IMX27_CLK_USB_AHB_GATE] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
+ clk[IMX27_CLK_SLCDC_AHB_GATE] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
+ clk[IMX27_CLK_SAHARA_AHB_GATE] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+ clk[IMX27_CLK_RTIC_AHB_GATE] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
+ clk[IMX27_CLK_LCDC_AHB_GATE] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
+ clk[IMX27_CLK_VPU_AHB_GATE] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
+ clk[IMX27_CLK_FEC_AHB_GATE] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
+ clk[IMX27_CLK_EMMA_AHB_GATE] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
+ clk[IMX27_CLK_EMI_AHB_GATE] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
+ clk[IMX27_CLK_DMA_AHB_GATE] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
+ clk[IMX27_CLK_CSI_AHB_GATE] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
+ clk[IMX27_CLK_BROM_AHB_GATE] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
+ clk[IMX27_CLK_ATA_AHB_GATE] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
+ clk[IMX27_CLK_WDOG_IPG_GATE] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
+ clk[IMX27_CLK_USB_IPG_GATE] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[IMX27_CLK_UART6_IPG_GATE] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[IMX27_CLK_UART5_IPG_GATE] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[IMX27_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[IMX27_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
+ clk[IMX27_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
+ clk[IMX27_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
+
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
+ clk_register_clkdev(clk[IMX27_CLK_CPU_DIV], NULL, "cpu0");
+
+ clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]);
+
+ imx_print_silicon_rev("i.MX27", mx27_revision());
+}
+
int __init mx27_clocks_init(unsigned long fref)
{
- int i;
- struct device_node *np;
+ ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K);
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[ckih] = imx_clk_fixed("ckih", fref);
- clk[ckil] = imx_clk_fixed("ckil", 32768);
- clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1);
- clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3);
+ _mx27_clocks_init(fref);
- clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1,
- mpll_osc_sel_clks,
- ARRAY_SIZE(mpll_osc_sel_clks));
- clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
- ARRAY_SIZE(mpll_sel_clks));
- clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
- clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
- clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1);
- clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
- clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
- } else {
- clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
- clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
- }
-
- clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6);
- clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
- clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
- clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
- clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
- clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
- clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
- clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
- clk[usb_div] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3);
- clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
- clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
- else
- clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
- clk[clko_div] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
- clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
- clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
- clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
- clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
- clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
- clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
- clk[slcdc_ipg_gate] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
- clk[sdhc3_ipg_gate] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
- clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
- clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
- clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
- clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
- clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8);
- clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
- clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
- clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
- clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13);
- clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
- clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
- clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
- clk[i2c2_ipg_gate] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
- clk[i2c1_ipg_gate] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
- clk[gpt6_ipg_gate] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
- clk[gpt5_ipg_gate] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
- clk[gpt4_ipg_gate] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
- clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
- clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
- clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
- clk[gpio_ipg_gate] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
- clk[fec_ipg_gate] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
- clk[emma_ipg_gate] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
- clk[dma_ipg_gate] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
- clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
- clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
- clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
- clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2);
- clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
- clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
- clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
- clk[vpu_baud_gate] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
- clk[per4_gate] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
- clk[per3_gate] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
- clk[per2_gate] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
- clk[per1_gate] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
- clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
- clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
- clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
- clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14);
- clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
- clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
- clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
- clk[emma_ahb_gate] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
- clk[emi_ahb_gate] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
- clk[dma_ahb_gate] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
- clk[csi_ahb_gate] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
- clk[brom_ahb_gate] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
- clk[ata_ahb_gate] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
- clk[wdog_ipg_gate] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
- clk[usb_ipg_gate] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
- clk[uart6_ipg_gate] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
- clk[uart5_ipg_gate] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
- clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
- clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
- clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
- clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
-
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX27 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
- if (np) {
- clk_data.clks = clk;
- clk_data.clk_num = ARRAY_SIZE(clk);
- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- }
-
- clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0");
- clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.1");
- clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.2");
- clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.3");
- clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.4");
- clk_register_clkdev(clk[uart6_ipg_gate], "ipg", "imx21-uart.5");
- clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
- clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
- clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
- clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
- clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1");
- clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2");
- clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.0");
- clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx27-cspi.0");
- clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.1");
- clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx27-cspi.1");
- clk_register_clkdev(clk[per2_gate], "per", "imx27-cspi.2");
- clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx27-cspi.2");
- clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
- clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
- clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0");
- clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
- clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
- clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma");
- clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma");
- clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
- clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
- clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0");
- clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
- clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
- clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
- clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
+ clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5");
+ clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2");
+ clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1");
+ clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2");
+ clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2");
+ clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0");
+ clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0");
+ clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0");
+ clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma");
+ clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma");
+ clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0");
+ clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0");
+ clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0");
+ clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0");
mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
- clk_prepare_enable(clk[emi_ahb_gate]);
-
- imx_print_silicon_rev("i.MX27", mx27_revision());
-
return 0;
}
-int __init mx27_clocks_init_dt(void)
+static void __init mx27_clocks_init_dt(struct device_node *np)
{
- struct device_node *np;
+ struct device_node *refnp;
u32 fref = 26000000; /* default */
- for_each_compatible_node(np, NULL, "fixed-clock") {
- if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ for_each_compatible_node(refnp, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(refnp, "fsl,imx-osc26m"))
continue;
- if (!of_property_read_u32(np, "clock-frequency", &fref))
+ if (!of_property_read_u32(refnp, "clock-frequency", &fref))
break;
}
- return mx27_clocks_init(fref);
+ ccm = of_iomap(np, 0);
+
+ _mx27_clocks_init(fref);
+
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
+CLK_OF_DECLARE(imx27_ccm, "fsl,imx27-ccm", mx27_clocks_init_dt);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 4a9de08..286ef42 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -51,7 +51,6 @@
int __init mx31_clocks_init(unsigned long fref)
{
void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
- int i;
struct device_node *np;
clk[dummy] = imx_clk_fixed("dummy", 0);
@@ -114,10 +113,7 @@
clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("imx31 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 71c86a2..a0d2b57 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -75,7 +75,6 @@
u32 pdr0, consumer_sel, hsp_sel;
struct arm_ahb_div *aad;
unsigned char *hsp_div;
- u32 i;
pdr0 = __raw_readl(base + MXC_CCM_PDR0);
consumer_sel = (pdr0 >> 16) & 0xf;
@@ -200,10 +199,7 @@
clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2);
clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX35 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 21d2b11..72d6521 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -18,11 +18,54 @@
#include <linux/of_irq.h>
#include <dt-bindings/clock/imx5-clock.h>
-#include "crm-regs-imx5.h"
#include "clk.h"
#include "common.h"
#include "hardware.h"
+#define MX51_DPLL1_BASE 0x83f80000
+#define MX51_DPLL2_BASE 0x83f84000
+#define MX51_DPLL3_BASE 0x83f88000
+
+#define MX53_DPLL1_BASE 0x63f80000
+#define MX53_DPLL2_BASE 0x63f84000
+#define MX53_DPLL3_BASE 0x63f88000
+#define MX53_DPLL4_BASE 0x63f8c000
+
+#define MXC_CCM_CCR (ccm_base + 0x00)
+#define MXC_CCM_CCDR (ccm_base + 0x04)
+#define MXC_CCM_CSR (ccm_base + 0x08)
+#define MXC_CCM_CCSR (ccm_base + 0x0c)
+#define MXC_CCM_CACRR (ccm_base + 0x10)
+#define MXC_CCM_CBCDR (ccm_base + 0x14)
+#define MXC_CCM_CBCMR (ccm_base + 0x18)
+#define MXC_CCM_CSCMR1 (ccm_base + 0x1c)
+#define MXC_CCM_CSCMR2 (ccm_base + 0x20)
+#define MXC_CCM_CSCDR1 (ccm_base + 0x24)
+#define MXC_CCM_CS1CDR (ccm_base + 0x28)
+#define MXC_CCM_CS2CDR (ccm_base + 0x2c)
+#define MXC_CCM_CDCDR (ccm_base + 0x30)
+#define MXC_CCM_CHSCDR (ccm_base + 0x34)
+#define MXC_CCM_CSCDR2 (ccm_base + 0x38)
+#define MXC_CCM_CSCDR3 (ccm_base + 0x3c)
+#define MXC_CCM_CSCDR4 (ccm_base + 0x40)
+#define MXC_CCM_CWDR (ccm_base + 0x44)
+#define MXC_CCM_CDHIPR (ccm_base + 0x48)
+#define MXC_CCM_CDCR (ccm_base + 0x4c)
+#define MXC_CCM_CTOR (ccm_base + 0x50)
+#define MXC_CCM_CLPCR (ccm_base + 0x54)
+#define MXC_CCM_CISR (ccm_base + 0x58)
+#define MXC_CCM_CIMR (ccm_base + 0x5c)
+#define MXC_CCM_CCOSR (ccm_base + 0x60)
+#define MXC_CCM_CGPR (ccm_base + 0x64)
+#define MXC_CCM_CCGR0 (ccm_base + 0x68)
+#define MXC_CCM_CCGR1 (ccm_base + 0x6c)
+#define MXC_CCM_CCGR2 (ccm_base + 0x70)
+#define MXC_CCM_CCGR3 (ccm_base + 0x74)
+#define MXC_CCM_CCGR4 (ccm_base + 0x78)
+#define MXC_CCM_CCGR5 (ccm_base + 0x7c)
+#define MXC_CCM_CCGR6 (ccm_base + 0x80)
+#define MXC_CCM_CCGR7 (ccm_base + 0x84)
+
/* Low-power Audio Playback Mode clock */
static const char *lp_apm_sel[] = { "osc", };
@@ -86,17 +129,15 @@
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
-static void __init mx5_clocks_common_init(unsigned long rate_ckil,
- unsigned long rate_osc, unsigned long rate_ckih1,
- unsigned long rate_ckih2)
+static void __init mx5_clocks_common_init(void __iomem *ccm_base)
{
- int i;
+ imx5_pm_set_ccm_base(ccm_base);
clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
- clk[IMX5_CLK_CKIL] = imx_obtain_fixed_clock("ckil", rate_ckil);
- clk[IMX5_CLK_OSC] = imx_obtain_fixed_clock("osc", rate_osc);
- clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", rate_ckih1);
- clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", rate_ckih2);
+ clk[IMX5_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+ clk[IMX5_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+ clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", 0);
+ clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", 0);
clk[IMX5_CLK_PERIPH_APM] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
@@ -244,58 +285,8 @@
clk[IMX5_CLK_SAHARA_IPG_GATE] = imx_clk_gate2("sahara_ipg_gate", "ipg", MXC_CCM_CCGR4, 14);
clk[IMX5_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "usb_phy1_gate", 1, 1);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX5 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
-
- clk_register_clkdev(clk[IMX5_CLK_GPT_HF_GATE], "per", "imx-gpt.0");
- clk_register_clkdev(clk[IMX5_CLK_GPT_IPG_GATE], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[IMX5_CLK_UART1_PER_GATE], "per", "imx21-uart.0");
- clk_register_clkdev(clk[IMX5_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[IMX5_CLK_UART2_PER_GATE], "per", "imx21-uart.1");
- clk_register_clkdev(clk[IMX5_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[IMX5_CLK_UART3_PER_GATE], "per", "imx21-uart.2");
- clk_register_clkdev(clk[IMX5_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[IMX5_CLK_UART4_PER_GATE], "per", "imx21-uart.3");
- clk_register_clkdev(clk[IMX5_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[IMX5_CLK_UART5_PER_GATE], "per", "imx21-uart.4");
- clk_register_clkdev(clk[IMX5_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI1_PER_GATE], "per", "imx51-ecspi.0");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI1_IPG_GATE], "ipg", "imx51-ecspi.0");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI2_PER_GATE], "per", "imx51-ecspi.1");
- clk_register_clkdev(clk[IMX5_CLK_ECSPI2_IPG_GATE], "ipg", "imx51-ecspi.1");
- clk_register_clkdev(clk[IMX5_CLK_CSPI_IPG_GATE], NULL, "imx35-cspi.2");
- clk_register_clkdev(clk[IMX5_CLK_I2C1_GATE], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[IMX5_CLK_I2C2_GATE], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "imx-udc-mx51");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ipg", "imx-udc-mx51");
- clk_register_clkdev(clk[IMX5_CLK_USBOH3_GATE], "ahb", "imx-udc-mx51");
- clk_register_clkdev(clk[IMX5_CLK_NFC_GATE], NULL, "imx51-nand");
- clk_register_clkdev(clk[IMX5_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[IMX5_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[IMX5_CLK_SSI3_IPG_GATE], NULL, "imx-ssi.2");
- clk_register_clkdev(clk[IMX5_CLK_SDMA_GATE], NULL, "imx35-sdma");
clk_register_clkdev(clk[IMX5_CLK_CPU_PODF], NULL, "cpu0");
- clk_register_clkdev(clk[IMX5_CLK_IIM_GATE], "iim", NULL);
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx2-wdt.1");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], NULL, "imx-keypad");
- clk_register_clkdev(clk[IMX5_CLK_IPU_DI1_GATE], "di1", "imx-tve.0");
clk_register_clkdev(clk[IMX5_CLK_GPC_DVFS], "gpc_dvfs", NULL);
- clk_register_clkdev(clk[IMX5_CLK_EPIT1_IPG_GATE], "ipg", "imx-epit.0");
- clk_register_clkdev(clk[IMX5_CLK_EPIT1_HF_GATE], "per", "imx-epit.0");
- clk_register_clkdev(clk[IMX5_CLK_EPIT2_IPG_GATE], "ipg", "imx-epit.1");
- clk_register_clkdev(clk[IMX5_CLK_EPIT2_HF_GATE], "per", "imx-epit.1");
/* Set SDHC parents to be PLL2 */
clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]);
@@ -322,12 +313,26 @@
static void __init mx50_clocks_init(struct device_node *np)
{
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
unsigned long r;
- int i;
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
+ pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@@ -349,17 +354,12 @@
clk[IMX5_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX50 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(0, 0, 0, 0);
-
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
@@ -370,21 +370,32 @@
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"));
}
CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
-int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
- unsigned long rate_ckih1, unsigned long rate_ckih2)
+static void __init mx51_clocks_init(struct device_node *np)
{
- int i;
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
u32 val;
- struct device_node *np;
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", MX51_DPLL3_BASE);
+ pll_base = ioremap(MX51_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX51_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX51_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
+
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
@@ -417,35 +428,12 @@
mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));
clk[IMX5_CLK_SPDIF1_GATE] = imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX51 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
- np = of_find_compatible_node(NULL, NULL, "fsl,imx51-ccm");
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
-
- clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL);
- clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0");
- clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_PER_GATE], "per", "sdhci-esdhc-imx51.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_IPG_GATE], "ipg", "sdhci-esdhc-imx51.1");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_PER_GATE], "per", "sdhci-esdhc-imx51.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_IPG_GATE], "ipg", "sdhci-esdhc-imx51.2");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_PER_GATE], "per", "sdhci-esdhc-imx51.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_IPG_GATE], "ipg", "sdhci-esdhc-imx51.3");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx51.3");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_PER_GATE], "per", "sdhci-esdhc-imx51.3");
-
/* set the usboh3 parent to pll2_sw */
clk_set_parent(clk[IMX5_CLK_USBOH3_SEL], clk[IMX5_CLK_PLL2_SW]);
@@ -453,9 +441,6 @@
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 166250000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 166250000);
- /* System timer */
- mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
-
clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
imx_print_silicon_rev("i.MX51", mx51_revision());
clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
@@ -474,25 +459,35 @@
val = readl(MXC_CCM_CLPCR);
val |= 1 << 23;
writel(val, MXC_CCM_CLPCR);
-
- return 0;
}
-
-static void __init mx51_clocks_init_dt(struct device_node *np)
-{
- mx51_clocks_init(0, 0, 0, 0);
-}
-CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
+CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init);
static void __init mx53_clocks_init(struct device_node *np)
{
- int i;
+ void __iomem *ccm_base;
+ void __iomem *pll_base;
unsigned long r;
- clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
- clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
- clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
- clk[IMX5_CLK_PLL4_SW] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
+ pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base);
+
+ pll_base = ioremap(MX53_DPLL4_BASE, SZ_16K);
+ WARN_ON(!pll_base);
+ clk[IMX5_CLK_PLL4_SW] = imx_clk_pllv2("pll4_sw", "osc", pll_base);
+
+ ccm_base = of_iomap(np, 0);
+ WARN_ON(!ccm_base);
+
+ mx5_clocks_common_init(ccm_base);
clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1,
lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
@@ -543,33 +538,12 @@
clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX53 clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- mx5_clocks_common_init(0, 0, 0, 0);
-
- clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0");
- clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx53.0");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC1_PER_GATE], "per", "sdhci-esdhc-imx53.0");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_IPG_GATE], "ipg", "sdhci-esdhc-imx53.1");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC2_PER_GATE], "per", "sdhci-esdhc-imx53.1");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_IPG_GATE], "ipg", "sdhci-esdhc-imx53.2");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC3_PER_GATE], "per", "sdhci-esdhc-imx53.2");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_IPG_GATE], "ipg", "sdhci-esdhc-imx53.3");
- clk_register_clkdev(clk[IMX5_CLK_DUMMY], "ahb", "sdhci-esdhc-imx53.3");
- clk_register_clkdev(clk[IMX5_CLK_ESDHC4_PER_GATE], "per", "sdhci-esdhc-imx53.3");
-
/* set SDHC root clock to 200MHZ*/
clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000);
clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000);
@@ -583,7 +557,5 @@
r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"));
}
CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 8556c78..6cceb77 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -19,6 +19,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
#include "clk.h"
#include "common.h"
@@ -73,48 +74,13 @@
"pcie_ref_125m", "sata_ref_100m",
};
-enum mx6q_clks {
- dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
- pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
- pll2_198m, pll3_120m, pll3_80m, pll3_60m, twd, step, pll1_sw,
- periph_pre, periph2_pre, periph_clk2_sel, periph2_clk2_sel, axi_sel,
- esai_sel, asrc_sel, spdif_sel, gpu2d_axi, gpu3d_axi, gpu2d_core_sel,
- gpu3d_core_sel, gpu3d_shader_sel, ipu1_sel, ipu2_sel, ldb_di0_sel,
- ldb_di1_sel, ipu1_di0_pre_sel, ipu1_di1_pre_sel, ipu2_di0_pre_sel,
- ipu2_di1_pre_sel, ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel,
- ipu2_di1_sel, hsi_tx_sel, pcie_axi_sel, ssi1_sel, ssi2_sel, ssi3_sel,
- usdhc1_sel, usdhc2_sel, usdhc3_sel, usdhc4_sel, enfc_sel, emi_sel,
- emi_slow_sel, vdo_axi_sel, vpu_axi_sel, cko1_sel, periph, periph2,
- periph_clk2, periph2_clk2, ipg, ipg_per, esai_pred, esai_podf,
- asrc_pred, asrc_podf, spdif_pred, spdif_podf, can_root, ecspi_root,
- gpu2d_core_podf, gpu3d_core_podf, gpu3d_shader, ipu1_podf, ipu2_podf,
- ldb_di0_podf, ldb_di1_podf, ipu1_di0_pre, ipu1_di1_pre, ipu2_di0_pre,
- ipu2_di1_pre, hsi_tx_podf, ssi1_pred, ssi1_podf, ssi2_pred, ssi2_podf,
- ssi3_pred, ssi3_podf, uart_serial_podf, usdhc1_podf, usdhc2_podf,
- usdhc3_podf, usdhc4_podf, enfc_pred, enfc_podf, emi_podf,
- emi_slow_podf, vpu_axi_podf, cko1_podf, axi, mmdc_ch0_axi_podf,
- mmdc_ch1_axi_podf, arm, ahb, apbh_dma, asrc, can1_ipg, can1_serial,
- can2_ipg, can2_serial, ecspi1, ecspi2, ecspi3, ecspi4, ecspi5, enet,
- esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
- hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
- ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
- mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch,
- gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
- ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
- usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
- pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
- sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
- usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
- spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div,
- lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max
-};
-
-static struct clk *clk[clk_max];
+static struct clk *clk[IMX6QDL_CLK_END];
static struct clk_onecell_data clk_data;
-static enum mx6q_clks const clks_init_on[] __initconst = {
- mmdc_ch0_axi, rom, arm,
+static unsigned int const clks_init_on[] __initconst = {
+ IMX6QDL_CLK_MMDC_CH0_AXI,
+ IMX6QDL_CLK_ROM,
+ IMX6QDL_CLK_ARM,
};
static struct clk_div_table clk_enet_ref_table[] = {
@@ -149,10 +115,10 @@
int i;
int ret;
- clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
- clk[ckih] = imx_obtain_fixed_clock("ckih1", 0);
- clk[osc] = imx_obtain_fixed_clock("osc", 0);
+ clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+ clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+ clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
+ clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
base = of_iomap(np, 0);
@@ -166,14 +132,14 @@
video_div_table[2].div = 1;
};
- /* type name parent_name base div_mask */
- clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
- clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
- clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
- clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
- clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
- clk[pll6_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
- clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3);
+ /* type name parent_name base div_mask */
+ clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
+ clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
+ clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
+ clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
+ clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
+ clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
+ clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x3);
/*
* Bit 20 is the reserved and read-only bit, we do this only for:
@@ -181,28 +147,28 @@
* - Keep refcount when do usbphy clk_enable/disable, in that case,
* the clk framework may need to enable/disable usbphy's parent
*/
- clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
- clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+ clk[IMX6QDL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clk[IMX6QDL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
/*
* usbphy*_gate needs to be on after system boots up, and software
* never needs to control it anymore.
*/
- clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
- clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+ clk[IMX6QDL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clk[IMX6QDL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
- clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
- clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
+ clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
+ clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
- clk[sata_ref_100m] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
- clk[pcie_ref_125m] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+ clk[IMX6QDL_CLK_SATA_REF_100M] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
+ clk[IMX6QDL_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
- clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ clk[IMX6QDL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
base + 0xe0, 0, 2, 0, clk_enet_ref_table,
&imx_ccm_lock);
- clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
- clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+ clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
/*
* lvds1_gate and lvds2_gate are pseudo-gates. Both can be
@@ -210,29 +176,29 @@
* the "output_enable" bit as a gate, even though it's really just
* enabling clock output.
*/
- clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
- clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
+ clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
+ clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
- /* name parent_name reg idx */
- clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
- clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
- clk[pll2_pfd2_396m] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
- clk[pll3_pfd0_720m] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
- clk[pll3_pfd1_540m] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
- clk[pll3_pfd2_508m] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
- clk[pll3_pfd3_454m] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+ /* name parent_name reg idx */
+ clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clk[IMX6QDL_CLK_PLL2_PFD1_594M] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clk[IMX6QDL_CLK_PLL2_PFD2_396M] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clk[IMX6QDL_CLK_PLL3_PFD0_720M] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clk[IMX6QDL_CLK_PLL3_PFD1_540M] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clk[IMX6QDL_CLK_PLL3_PFD2_508M] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clk[IMX6QDL_CLK_PLL3_PFD3_454M] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
- /* name parent_name mult div */
- clk[pll2_198m] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
- clk[pll3_120m] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
- clk[pll3_80m] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
- clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
- clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ /* name parent_name mult div */
+ clk[IMX6QDL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clk[IMX6QDL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
- clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clk[pll4_audio_div] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
- clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
- clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clk[IMX6QDL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
np = ccm_node;
base = of_iomap(np, 0);
@@ -240,262 +206,254 @@
imx6q_pm_set_ccm_base(base);
- /* name reg shift width parent_names num_parents */
- clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
- clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
- clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
- clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
- clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[spdif_sel] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
- clk[gpu2d_axi] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clk[gpu3d_axi] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
- clk[gpu2d_core_sel] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
- clk[gpu3d_core_sel] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
- clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
- clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
- clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
- clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di0_sel] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
- clk[ipu1_di1_sel] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di0_sel] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
- clk[ipu2_di1_sel] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
- clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
- clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
- clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[ssi2_sel] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[ssi3_sel] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
- clk[usdhc1_sel] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[usdhc2_sel] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[usdhc3_sel] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[usdhc4_sel] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
- clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
- clk[emi_sel] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup);
- clk[emi_slow_sel] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup);
- clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
- clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
- clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
- clk[cko2_sel] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
- clk[cko] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
+ /* name reg shift width parent_names num_parents */
+ clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clk[IMX6QDL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[IMX6QDL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[IMX6QDL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+ clk[IMX6QDL_CLK_AXI_SEL] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
+ clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
+ clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
+ clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
+ clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT);
+ clk[IMX6QDL_CLK_HSI_TX_SEL] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
+ clk[IMX6QDL_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clk[IMX6QDL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
+ clk[IMX6QDL_CLK_EMI_SEL] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EMI_SLOW_SEL] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
+ clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
+ clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+ clk[IMX6QDL_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
+ clk[IMX6QDL_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
- /* name reg shift width busy: reg, shift parent_names num_parents */
- clk[periph] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
- clk[periph2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clk[IMX6QDL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clk[IMX6QDL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
- /* name parent_name reg shift width */
- clk[periph_clk2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
- clk[periph2_clk2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
- clk[ipg] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
- clk[ipg_per] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
- clk[esai_pred] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
- clk[esai_podf] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
- clk[asrc_pred] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
- clk[asrc_podf] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
- clk[spdif_pred] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
- clk[spdif_podf] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
- clk[can_root] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
- clk[ecspi_root] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
- clk[gpu2d_core_podf] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
- clk[gpu3d_core_podf] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
- clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
- clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
- clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
- clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
- clk[ldb_di0_podf] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
- clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
- clk[ldb_di1_podf] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
- clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
- clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
- clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
- clk[ipu2_di1_pre] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
- clk[hsi_tx_podf] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
- clk[ssi1_pred] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
- clk[ssi1_podf] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
- clk[ssi2_pred] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
- clk[ssi2_podf] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
- clk[ssi3_pred] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
- clk[ssi3_podf] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
- clk[uart_serial_podf] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
- clk[usdhc1_podf] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
- clk[usdhc2_podf] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
- clk[usdhc3_podf] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
- clk[usdhc4_podf] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
- clk[enfc_pred] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
- clk[enfc_podf] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
- clk[emi_podf] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
- clk[emi_slow_podf] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
- clk[vpu_axi_podf] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
- clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
- clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
+ /* name parent_name reg shift width */
+ clk[IMX6QDL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clk[IMX6QDL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clk[IMX6QDL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clk[IMX6QDL_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clk[IMX6QDL_CLK_ASRC_PRED] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
+ clk[IMX6QDL_CLK_ASRC_PODF] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
+ clk[IMX6QDL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clk[IMX6QDL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
+ clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
+ clk[IMX6QDL_CLK_GPU2D_CORE_PODF] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
+ clk[IMX6QDL_CLK_GPU3D_CORE_PODF] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
+ clk[IMX6QDL_CLK_GPU3D_SHADER] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
+ clk[IMX6QDL_CLK_IPU1_PODF] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
+ clk[IMX6QDL_CLK_IPU2_PODF] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
+ clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI0_PODF] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
+ clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clk[IMX6QDL_CLK_LDB_DI1_PODF] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
+ clk[IMX6QDL_CLK_IPU1_DI0_PRE] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
+ clk[IMX6QDL_CLK_IPU1_DI1_PRE] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
+ clk[IMX6QDL_CLK_IPU2_DI0_PRE] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
+ clk[IMX6QDL_CLK_IPU2_DI1_PRE] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
+ clk[IMX6QDL_CLK_HSI_TX_PODF] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
+ clk[IMX6QDL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clk[IMX6QDL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clk[IMX6QDL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clk[IMX6QDL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clk[IMX6QDL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clk[IMX6QDL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
+ clk[IMX6QDL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clk[IMX6QDL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clk[IMX6QDL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
+ clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
+ clk[IMX6QDL_CLK_EMI_PODF] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EMI_SLOW_PODF] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
+ clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+ clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
- /* name parent_name reg shift width busy: reg, shift */
- clk[axi] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
- clk[mmdc_ch0_axi_podf] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
- clk[mmdc_ch1_axi_podf] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
- clk[arm] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
- clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+ /* name parent_name reg shift width busy: reg, shift */
+ clk[IMX6QDL_CLK_AXI] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clk[IMX6QDL_CLK_MMDC_CH0_AXI_PODF] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clk[IMX6QDL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+ clk[IMX6QDL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
- /* name parent_name reg shift */
- clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
- clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
- clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
- clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
- clk[can2_ipg] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
- clk[can2_serial] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
- clk[ecspi1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
- clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
- clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
- clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
+ /* name parent_name reg shift */
+ clk[IMX6QDL_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
+ clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
+ clk[IMX6QDL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clk[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
+ clk[IMX6QDL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clk[IMX6QDL_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
+ clk[IMX6QDL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
+ clk[IMX6QDL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
+ clk[IMX6QDL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
+ clk[IMX6QDL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
if (cpu_is_imx6dl())
- /* ecspi5 is replaced with i2c4 on imx6dl & imx6s */
- clk[ecspi5] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
+ clk[IMX6DL_CLK_I2C4] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8);
else
- clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
- clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
- clk[esai] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai);
- clk[esai_ahb] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai);
- clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
- clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
+ clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
+ clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
+ clk[IMX6QDL_CLK_ESAI] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_ESAI_AHB] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai);
+ clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
+ clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of imx6q clock gpu3d_shader get
* redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl.
*/
- clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
+ clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24);
else
- clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
- clk[gpu3d_core] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
- clk[hdmi_iahb] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
- clk[hdmi_isfr] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
- clk[i2c1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
- clk[i2c2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
- clk[i2c3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
- clk[iim] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
- clk[enfc] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
- clk[vdoa] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26);
- clk[ipu1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
- clk[ipu1_di0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
- clk[ipu1_di1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
- clk[ipu2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
- clk[ipu2_di0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
- clk[ldb_di0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
- clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
- clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
- clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
+ clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
+ clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
+ clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
+ clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
+ clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
+ clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
+ clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
+ clk[IMX6QDL_CLK_IIM] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
+ clk[IMX6QDL_CLK_ENFC] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
+ clk[IMX6QDL_CLK_VDOA] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26);
+ clk[IMX6QDL_CLK_IPU1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
+ clk[IMX6QDL_CLK_IPU1_DI0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
+ clk[IMX6QDL_CLK_IPU1_DI1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
+ clk[IMX6QDL_CLK_IPU2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
+ clk[IMX6QDL_CLK_IPU2_DI0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
+ clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
+ clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
+ clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
+ clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of the imx6q clock gpu2d get
* redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl.
*/
- clk[mlb] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18);
+ clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18);
else
- clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
- clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
- clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
- clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
- clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
- clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
- clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
- clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
- clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
- clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
- clk[pwm4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
- clk[gpmi_bch_apb] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
- clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
- clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
- clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
- clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
- clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
- clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
- clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
- clk[spdif] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
- clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
- clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
- clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
- clk[uart_ipg] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
- clk[uart_serial] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
- clk[usboh3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
- clk[usdhc1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
- clk[usdhc2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
- clk[usdhc3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
- clk[usdhc4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
- clk[eim_slow] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10);
- clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
- clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
- clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
- clk[cko2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
+ clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
+ clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
+ clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
+ clk[IMX6QDL_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
+ clk[IMX6QDL_CLK_OPENVG_AXI] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
+ clk[IMX6QDL_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
+ clk[IMX6QDL_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
+ clk[IMX6QDL_CLK_PWM1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
+ clk[IMX6QDL_CLK_PWM2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
+ clk[IMX6QDL_CLK_PWM3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
+ clk[IMX6QDL_CLK_PWM4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
+ clk[IMX6QDL_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clk[IMX6QDL_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clk[IMX6QDL_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
+ clk[IMX6QDL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[IMX6QDL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
+ clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
+ clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14);
+ clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
+ clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
+ clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
+ clk[IMX6QDL_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clk[IMX6QDL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
+ clk[IMX6QDL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clk[IMX6QDL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clk[IMX6QDL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clk[IMX6QDL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clk[IMX6QDL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10);
+ clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
+ clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
+ clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+ clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
- for (i = 0; i < ARRAY_SIZE(clk); i++)
- if (IS_ERR(clk[i]))
- pr_err("i.MX6q clk %d: register failed with %ld\n",
- i, PTR_ERR(clk[i]));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
- clk_register_clkdev(clk[enet_ref], "enet_ref", NULL);
+ clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
cpu_is_imx6dl()) {
- clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
+ clk_set_parent(clk[IMX6QDL_CLK_LDB_DI0_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_LDB_DI1_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
}
- clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]);
- clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]);
- clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]);
- clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]);
- clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_SEL], clk[IMX6QDL_CLK_IPU1_DI0_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_SEL], clk[IMX6QDL_CLK_IPU1_DI1_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_SEL], clk[IMX6QDL_CLK_IPU2_DI0_PRE]);
+ clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_SEL], clk[IMX6QDL_CLK_IPU2_DI1_PRE]);
/*
* The gpmi needs 100MHz frequency in the EDO/Sync mode,
* We can not get the 100MHz from the pll2_pfd0_352m.
* So choose pll2_pfd2_396m as enfc_sel's parent.
*/
- clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]);
+ clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
- clk_prepare_enable(clk[usbphy1_gate]);
- clk_prepare_enable(clk[usbphy2_gate]);
+ clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]);
+ clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]);
}
/*
* Let's initially set up CLKO with OSC24M, since this configuration
* is widely used by imx6q board designs to clock audio codec.
*/
- ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+ ret = clk_set_parent(clk[IMX6QDL_CLK_CKO2_SEL], clk[IMX6QDL_CLK_OSC]);
if (!ret)
- ret = clk_set_parent(clk[cko], clk[cko2]);
+ ret = clk_set_parent(clk[IMX6QDL_CLK_CKO], clk[IMX6QDL_CLK_CKO2]);
if (ret)
pr_warn("failed to set up CLKO: %d\n", ret);
/* Audio-related clocks configuration */
- clk_set_parent(clk[spdif_sel], clk[pll3_pfd3_454m]);
+ clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
/* All existing boards with PCIe use LVDS1 */
if (IS_ENABLED(CONFIG_PCI_IMX6))
- clk_set_parent(clk[lvds1_sel], clk[sata_ref_100m]);
+ clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
-
- mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"));
}
CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index 5408ca7..fef46fa 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -348,18 +348,12 @@
clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX6SL clk %d: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0");
- clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
/* Ensure the AHB clk is at 132MHz. */
ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
if (ret)
@@ -383,8 +377,5 @@
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
- mxc_timer_init_dt(np);
}
CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init);
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c
index 72f8902..ecde72b 100644
--- a/arch/arm/mach-imx/clk-imx6sx.c
+++ b/arch/arm/mach-imx/clk-imx6sx.c
@@ -124,6 +124,9 @@
static u32 share_count_asrc;
static u32 share_count_audio;
static u32 share_count_esai;
+static u32 share_count_ssi1;
+static u32 share_count_ssi2;
+static u32 share_count_ssi3;
static void __init imx6sx_clocks_init(struct device_node *ccm_node)
{
@@ -409,12 +412,12 @@
clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
- clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
- clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
- clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
- clks[IMX6SX_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18);
- clks[IMX6SX_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20);
- clks[IMX6SX_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22);
+ clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3);
+ clks[IMX6SX_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1);
+ clks[IMX6SX_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2);
+ clks[IMX6SX_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3);
clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26);
clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28);
@@ -443,17 +446,12 @@
/* mask handshake of mmdc */
writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
- clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0");
- clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0");
-
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clks[clks_init_on[i]]);
@@ -517,8 +515,5 @@
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt");
- mxc_timer_init_dt(np);
}
CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index 22dc3ee..f60d6d5 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -295,14 +295,18 @@
clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1));
- clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(0));
- clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(4));
+ clk[VF610_CLK_FLEXCAN0_EN] = imx_clk_gate("flexcan0_en", "ipg_bus", CCM_CSCDR2, 11);
+ clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "flexcan0_en", CCM_CCGR0, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_FLEXCAN1_EN] = imx_clk_gate("flexcan1_en", "ipg_bus", CCM_CSCDR2, 12);
+ clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "flexcan1_en", CCM_CCGR9, CCM_CCGRx_CGn(4));
clk[VF610_CLK_DMAMUX0] = imx_clk_gate2("dmamux0", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(4));
clk[VF610_CLK_DMAMUX1] = imx_clk_gate2("dmamux1", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(5));
clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1));
clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2));
+ imx_check_clocks(clk, ARRAY_SIZE(clk));
+
clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]);
clk_set_rate(clk[VF610_CLK_QSPI0_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_SEL]) / 2);
clk_set_rate(clk[VF610_CLK_QSPI0_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X4_DIV]) / 2);
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
index edc35df..df12b53 100644
--- a/arch/arm/mach-imx/clk.c
+++ b/arch/arm/mach-imx/clk.c
@@ -7,6 +7,16 @@
DEFINE_SPINLOCK(imx_ccm_lock);
+void __init imx_check_clocks(struct clk *clks[], unsigned int count)
+{
+ unsigned i;
+
+ for (i = 0; i < count; i++)
+ if (IS_ERR(clks[i]))
+ pr_err("i.MX clk %u: register failed with %ld\n",
+ i, PTR_ERR(clks[i]));
+}
+
static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name)
{
struct of_phandle_args phandle;
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index e29f6eb..d5ba76f 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -6,6 +6,8 @@
extern spinlock_t imx_ccm_lock;
+void imx_check_clocks(struct clk *clks[], unsigned int count);
+
extern void imx_cscmr1_fixup(u32 *val);
struct clk *imx_clk_pllv1(const char *name, const char *parent,
@@ -95,6 +97,13 @@
shift, 0, &imx_ccm_lock);
}
+static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, CLK_GATE_SET_TO_DISABLE, &imx_ccm_lock);
+}
+
static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
u8 shift, u8 width, const char **parents, int num_parents)
{
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 9ab785c..22ba897 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -19,6 +19,7 @@
struct clk;
struct device_node;
enum mxc_cpu_pwr_mode;
+struct of_device_id;
void mx1_map_io(void);
void mx21_map_io(void);
@@ -26,48 +27,34 @@
void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
-void mx51_map_io(void);
-void mx53_map_io(void);
void imx1_init_early(void);
void imx21_init_early(void);
void imx25_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
-void imx51_init_early(void);
-void imx53_init_early(void);
void mxc_init_irq(void __iomem *);
-void tzic_init_irq(void __iomem *);
+void tzic_init_irq(void);
void mx1_init_irq(void);
void mx21_init_irq(void);
void mx25_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
-void mx51_init_irq(void);
-void mx53_init_irq(void);
void imx1_soc_init(void);
void imx21_soc_init(void);
void imx25_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
-void imx51_soc_init(void);
-void imx51_init_late(void);
-void imx53_init_late(void);
void epit_timer_init(void __iomem *base, int irq);
void mxc_timer_init(void __iomem *, int);
-void mxc_timer_init_dt(struct device_node *);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx25_clocks_init(void);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);
-int mx51_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2);
-int mx25_clocks_init_dt(void);
-int mx27_clocks_init_dt(void);
int mx31_clocks_init_dt(void);
struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
@@ -75,8 +62,10 @@
void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *);
void mxc_arch_reset_init_dt(void);
+int mx51_revision(void);
int mx53_revision(void);
void imx_set_aips(void __iomem *);
+void imx_aips_allow_unprivileged_access(const char *compat);
int mxc_device_init(void);
void imx_set_soc_revision(unsigned int rev);
unsigned int imx_get_soc_revision(void);
@@ -117,7 +106,7 @@
#endif
void imx_src_init(void);
void imx_gpc_init(void);
-void imx_gpc_pre_suspend(void);
+void imx_gpc_pre_suspend(bool arm_power_off);
void imx_gpc_post_resume(void);
void imx_gpc_mask_all(void);
void imx_gpc_restore_all(void);
@@ -127,7 +116,7 @@
void imx_anatop_pre_suspend(void);
void imx_anatop_post_resume(void);
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_int_mem_clk_lpm(void);
+void imx6q_set_int_mem_clk_lpm(bool enable);
void imx6sl_set_wait_clk(bool enter);
void imx_cpu_die(unsigned int cpu);
@@ -144,12 +133,17 @@
void imx6q_pm_init(void);
void imx6dl_pm_init(void);
void imx6sl_pm_init(void);
+void imx6sx_pm_init(void);
void imx6q_pm_set_ccm_base(void __iomem *base);
#ifdef CONFIG_PM
-void imx5_pm_init(void);
+void imx51_pm_init(void);
+void imx53_pm_init(void);
+void imx5_pm_set_ccm_base(void __iomem *base);
#else
-static inline void imx5_pm_init(void) {}
+static inline void imx51_pm_init(void) {}
+static inline void imx53_pm_init(void) {}
+static inline void imx5_pm_set_ccm_base(void __iomem *base) {}
#endif
#ifdef CONFIG_NEON
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index c1c99a7..3403bac 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -16,6 +16,8 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "hardware.h"
#include "common.h"
@@ -24,10 +26,26 @@
#define IIM_SREV 0x24
+static u32 imx5_read_srev_reg(const char *compat)
+{
+ void __iomem *iim_base;
+ struct device_node *np;
+ u32 srev;
+
+ np = of_find_compatible_node(NULL, NULL, compat);
+ iim_base = of_iomap(np, 0);
+ WARN_ON(!iim_base);
+
+ srev = readl(iim_base + IIM_SREV) & 0xff;
+
+ iounmap(iim_base);
+
+ return srev;
+}
+
static int get_mx51_srev(void)
{
- void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
- u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+ u32 rev = imx5_read_srev_reg("fsl,imx51-iim");
switch (rev) {
case 0x0:
@@ -77,8 +95,7 @@
static int get_mx53_srev(void)
{
- void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
- u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+ u32 rev = imx5_read_srev_reg("fsl,imx53-iim");
switch (rev) {
case 0x0:
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index bbe8ff1..df42c14 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -2,6 +2,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
@@ -60,6 +61,18 @@
__raw_writel(reg, base + 0x50);
}
+void __init imx_aips_allow_unprivileged_access(
+ const char *compat)
+{
+ void __iomem *aips_base_addr;
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, compat) {
+ aips_base_addr = of_iomap(np, 0);
+ imx_set_aips(aips_base_addr);
+ }
+}
+
struct device * __init imx_soc_device_init(void)
{
struct soc_device_attribute *soc_dev_attr;
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 6bcae04..10844d3 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -13,6 +13,7 @@
#include "common.h"
#include "cpuidle.h"
+#include "hardware.h"
static atomic_t master = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(master_lock);
@@ -66,10 +67,11 @@
int __init imx6q_cpuidle_init(void)
{
/* Need to enable SCU standby for entering WAIT modes */
- imx_scu_standby_enable();
+ if (!cpu_is_imx6sx())
+ imx_scu_standby_enable();
/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
- imx6q_set_int_mem_clk_lpm();
+ imx6q_set_int_mem_clk_lpm(true);
return cpuidle_register(&imx6q_cpuidle_driver, NULL);
}
diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h
deleted file mode 100644
index 5e3f1f0..0000000
--- a/arch/arm/mach-imx/crm-regs-imx5.h
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-
-#define MX51_CCM_BASE MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
-#define MX51_DPLL1_BASE MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
-#define MX51_DPLL2_BASE MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
-#define MX51_DPLL3_BASE MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
-#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
-#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
-
-/*MX53*/
-#define MX53_CCM_BASE MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR)
-#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
-#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
-#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL 0x00
-#define MXC_PLL_DP_CONFIG 0x04
-#define MXC_PLL_DP_OP 0x08
-#define MXC_PLL_DP_MFD 0x0C
-#define MXC_PLL_DP_MFN 0x10
-#define MXC_PLL_DP_MFNMINUS 0x14
-#define MXC_PLL_DP_MFNPLUS 0x18
-#define MXC_PLL_DP_HFS_OP 0x1C
-#define MXC_PLL_DP_HFS_MFD 0x20
-#define MXC_PLL_DP_HFS_MFN 0x24
-#define MXC_PLL_DP_MFN_TOGC 0x28
-#define MXC_PLL_DP_DESTAT 0x2c
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
-#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
-#define MXC_PLL_DP_CTL_ADE 0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
-#define MXC_PLL_DP_CTL_HFSM 0x80
-#define MXC_PLL_DP_CTL_PRE 0x40
-#define MXC_PLL_DP_CTL_UPEN 0x20
-#define MXC_PLL_DP_CTL_RST 0x10
-#define MXC_PLL_DP_CTL_RCP 0x8
-#define MXC_PLL_DP_CTL_PLM 0x4
-#define MXC_PLL_DP_CTL_BRM0 0x2
-#define MXC_PLL_DP_CTL_LRF 0x1
-
-#define MXC_PLL_DP_CONFIG_BIST 0x8
-#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
-#define MXC_PLL_DP_CONFIG_AREN 0x2
-#define MXC_PLL_DP_CONFIG_LDREQ 0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET 4
-#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
-#define MXC_PLL_DP_OP_PDF_OFFSET 0
-#define MXC_PLL_DP_OP_PDF_MASK 0xF
-
-#define MXC_PLL_DP_MFD_OFFSET 0
-#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET 0x0
-#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
-#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
-#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
-#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
-
-#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
-#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
-
-/* Register addresses of CCM*/
-#define MXC_CCM_CCR (MX51_CCM_BASE + 0x00)
-#define MXC_CCM_CCDR (MX51_CCM_BASE + 0x04)
-#define MXC_CCM_CSR (MX51_CCM_BASE + 0x08)
-#define MXC_CCM_CCSR (MX51_CCM_BASE + 0x0C)
-#define MXC_CCM_CACRR (MX51_CCM_BASE + 0x10)
-#define MXC_CCM_CBCDR (MX51_CCM_BASE + 0x14)
-#define MXC_CCM_CBCMR (MX51_CCM_BASE + 0x18)
-#define MXC_CCM_CSCMR1 (MX51_CCM_BASE + 0x1C)
-#define MXC_CCM_CSCMR2 (MX51_CCM_BASE + 0x20)
-#define MXC_CCM_CSCDR1 (MX51_CCM_BASE + 0x24)
-#define MXC_CCM_CS1CDR (MX51_CCM_BASE + 0x28)
-#define MXC_CCM_CS2CDR (MX51_CCM_BASE + 0x2C)
-#define MXC_CCM_CDCDR (MX51_CCM_BASE + 0x30)
-#define MXC_CCM_CHSCDR (MX51_CCM_BASE + 0x34)
-#define MXC_CCM_CSCDR2 (MX51_CCM_BASE + 0x38)
-#define MXC_CCM_CSCDR3 (MX51_CCM_BASE + 0x3C)
-#define MXC_CCM_CSCDR4 (MX51_CCM_BASE + 0x40)
-#define MXC_CCM_CWDR (MX51_CCM_BASE + 0x44)
-#define MXC_CCM_CDHIPR (MX51_CCM_BASE + 0x48)
-#define MXC_CCM_CDCR (MX51_CCM_BASE + 0x4C)
-#define MXC_CCM_CTOR (MX51_CCM_BASE + 0x50)
-#define MXC_CCM_CLPCR (MX51_CCM_BASE + 0x54)
-#define MXC_CCM_CISR (MX51_CCM_BASE + 0x58)
-#define MXC_CCM_CIMR (MX51_CCM_BASE + 0x5C)
-#define MXC_CCM_CCOSR (MX51_CCM_BASE + 0x60)
-#define MXC_CCM_CGPR (MX51_CCM_BASE + 0x64)
-#define MXC_CCM_CCGR0 (MX51_CCM_BASE + 0x68)
-#define MXC_CCM_CCGR1 (MX51_CCM_BASE + 0x6C)
-#define MXC_CCM_CCGR2 (MX51_CCM_BASE + 0x70)
-#define MXC_CCM_CCGR3 (MX51_CCM_BASE + 0x74)
-#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78)
-#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C)
-#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80)
-#define MXC_CCM_CCGR7 (MX51_CCM_BASE + 0x84)
-
-#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84)
-
-/* Define the bits in register CCR */
-#define MXC_CCM_CCR_COSC_EN (1 << 12)
-#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11)
-#define MXC_CCM_CCR_CAMP2_EN (1 << 10)
-#define MXC_CCM_CCR_CAMP1_EN (1 << 9)
-#define MXC_CCM_CCR_FPM_EN (1 << 8)
-#define MXC_CCM_CCR_OSCNT_OFFSET (0)
-#define MXC_CCM_CCR_OSCNT_MASK (0xFF)
-
-/* Define the bits in register CCDR */
-#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18)
-#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17)
-#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16)
-
-/* Define the bits in register CSR */
-#define MXC_CCM_CSR_COSR_READY (1 << 5)
-#define MXC_CCM_CSR_LVS_VALUE (1 << 4)
-#define MXC_CCM_CSR_CAMP2_READY (1 << 3)
-#define MXC_CCM_CSR_CAMP1_READY (1 << 2)
-#define MXC_CCM_CSR_FPM_READY (1 << 1)
-#define MXC_CCM_CSR_REF_EN_B (1 << 0)
-
-/* Define the bits in register CCSR */
-#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9)
-#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7)
-#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7)
-#define MXC_CCM_CCSR_STEP_SEL_LP_APM 0
-#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS 1 /* Only when JTAG connected? */
-#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
-#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
-#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5)
-#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5)
-#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3)
-#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3)
-#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) /* 0: pll1_main_clk,
- 1: step_clk */
-#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1)
-#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0)
-
-/* Define the bits in register CACRR */
-#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0)
-#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7)
-
-/* Define the bits in register CBCDR */
-#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26)
-#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
-#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET (30)
-#define MXC_CCM_CBCDR_DDR_HF_SEL (0x1 << 30)
-#define MXC_CCM_CBCDR_DDR_PODF_OFFSET (27)
-#define MXC_CCM_CBCDR_DDR_PODF_MASK (0x7 << 27)
-#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22)
-#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22)
-#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19)
-#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16)
-#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16)
-#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13)
-#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13)
-#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10)
-#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10)
-#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8)
-#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3)
-#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0)
-#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7)
-
-/* Define the bits in register CBCMR */
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1)
-#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0)
-
-/* Define the bits in register CSCMR1 */
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30)
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20)
-#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL (0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11)
-#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8)
-#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7)
-#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2)
-#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1)
-#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1)
-
-/* Define the bits in register CSCMR2 */
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n) (26+n*3)
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n) (0x7 << (26+n*3))
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24)
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10)
-#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6)
-#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5)
-#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3)
-
-/* Define the bits in register CSCDR1 */
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_MASK (0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7)
-
-/* Define the bits in register CS1CDR and CS2CDR */
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F)
-
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CDCDR */
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28)
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7)
-
-/* Define the bits in register CHSCCDR */
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7)
-
-/* Define the bits in register CSCDR2 */
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F)
-
-/* Define the bits in register CSCDR3 */
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CSCDR4 */
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F)
-
-/* Define the bits in register CDHIPR */
-#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16)
-#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY (1 << 8)
-#define MXC_CCM_CDHIPR_DDR_PODF_BUSY (1 << 7)
-#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6)
-#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5)
-#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4)
-#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3)
-#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2)
-#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1)
-#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0)
-
-/* Define the bits in register CDCR */
-#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3)
-
-/* Define the bits in register CLPCR */
-#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23)
-#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22)
-#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21)
-#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 25)
-#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20)
-#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19)
-#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
-#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17)
-#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16)
-#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11)
-#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9)
-#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9)
-#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
-#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7)
-#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
-#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3)
-#define MXC_CCM_CLPCR_LPM_OFFSET (0)
-#define MXC_CCM_CLPCR_LPM_MASK (0x3)
-
-/* Define the bits in register CISR */
-#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25)
-#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
-#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20)
-#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19)
-#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18)
-#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17)
-#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16)
-#define MXC_CCM_CISR_COSC_READY (0x1 << 6)
-#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5)
-#define MXC_CCM_CISR_CKIH_READY (0x1 << 4)
-#define MXC_CCM_CISR_FPM_READY (0x1 << 3)
-#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2)
-#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1)
-#define MXC_CCM_CISR_LRF_PLL1 (0x1)
-
-/* Define the bits in register CIMR */
-#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25)
-#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
-#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20)
-#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19)
-#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18)
-#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17)
-#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16)
-#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5)
-#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4)
-#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3)
-#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2)
-#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1)
-#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1)
-
-/* Define the bits in register CCOSR */
-#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24)
-#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21)
-#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21)
-#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16)
-#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16)
-#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7)
-#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4)
-#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4)
-#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0)
-#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF)
-
-/* Define the bits in registers CGPR */
-#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4)
-#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7)
-
-/* Define the bits in registers CCGRx */
-#define MXC_CCM_CCGRx_CG_MASK 0x3
-#define MXC_CCM_CCGRx_MOD_OFF 0x0
-#define MXC_CCM_CCGRx_MOD_ON 0x3
-#define MXC_CCM_CCGRx_MOD_IDLE 0x1
-
-#define MXC_CCM_CCGRx_CG15_MASK (0x3 << 30)
-#define MXC_CCM_CCGRx_CG14_MASK (0x3 << 28)
-#define MXC_CCM_CCGRx_CG13_MASK (0x3 << 26)
-#define MXC_CCM_CCGRx_CG12_MASK (0x3 << 24)
-#define MXC_CCM_CCGRx_CG11_MASK (0x3 << 22)
-#define MXC_CCM_CCGRx_CG10_MASK (0x3 << 20)
-#define MXC_CCM_CCGRx_CG9_MASK (0x3 << 18)
-#define MXC_CCM_CCGRx_CG8_MASK (0x3 << 16)
-#define MXC_CCM_CCGRx_CG5_MASK (0x3 << 10)
-#define MXC_CCM_CCGRx_CG4_MASK (0x3 << 8)
-#define MXC_CCM_CCGRx_CG3_MASK (0x3 << 6)
-#define MXC_CCM_CCGRx_CG2_MASK (0x3 << 4)
-#define MXC_CCM_CCGRx_CG1_MASK (0x3 << 2)
-#define MXC_CCM_CCGRx_CG0_MASK (0x3 << 0)
-
-#define MXC_CCM_CCGRx_CG15_OFFSET 30
-#define MXC_CCM_CCGRx_CG14_OFFSET 28
-#define MXC_CCM_CCGRx_CG13_OFFSET 26
-#define MXC_CCM_CCGRx_CG12_OFFSET 24
-#define MXC_CCM_CCGRx_CG11_OFFSET 22
-#define MXC_CCM_CCGRx_CG10_OFFSET 20
-#define MXC_CCM_CCGRx_CG9_OFFSET 18
-#define MXC_CCM_CCGRx_CG8_OFFSET 16
-#define MXC_CCM_CCGRx_CG7_OFFSET 14
-#define MXC_CCM_CCGRx_CG6_OFFSET 12
-#define MXC_CCM_CCGRx_CG5_OFFSET 10
-#define MXC_CCM_CCGRx_CG4_OFFSET 8
-#define MXC_CCM_CCGRx_CG3_OFFSET 6
-#define MXC_CCM_CCGRx_CG2_OFFSET 4
-#define MXC_CCM_CCGRx_CG1_OFFSET 2
-#define MXC_CCM_CCGRx_CG0_OFFSET 0
-
-#define MXC_DPTC_LP_BASE (MX51_GPC_BASE + 0x80)
-#define MXC_DPTC_GP_BASE (MX51_GPC_BASE + 0x100)
-#define MXC_DVFS_CORE_BASE (MX51_GPC_BASE + 0x180)
-#define MXC_DPTC_PER_BASE (MX51_GPC_BASE + 0x1C0)
-#define MXC_PGC_IPU_BASE (MX51_GPC_BASE + 0x220)
-#define MXC_PGC_VPU_BASE (MX51_GPC_BASE + 0x240)
-#define MXC_PGC_GPU_BASE (MX51_GPC_BASE + 0x260)
-#define MXC_SRPG_NEON_BASE (MX51_GPC_BASE + 0x280)
-#define MXC_SRPG_ARM_BASE (MX51_GPC_BASE + 0x2A0)
-#define MXC_SRPG_EMPGC0_BASE (MX51_GPC_BASE + 0x2C0)
-#define MXC_SRPG_EMPGC1_BASE (MX51_GPC_BASE + 0x2D0)
-#define MXC_SRPG_MEGAMIX_BASE (MX51_GPC_BASE + 0x2E0)
-#define MXC_SRPG_EMI_BASE (MX51_GPC_BASE + 0x300)
-
-/* CORTEXA8 platform */
-#define MXC_CORTEXA8_PLAT_PVID (MX51_CORTEXA8_BASE + 0x0)
-#define MXC_CORTEXA8_PLAT_GPC (MX51_CORTEXA8_BASE + 0x4)
-#define MXC_CORTEXA8_PLAT_PIC (MX51_CORTEXA8_BASE + 0x8)
-#define MXC_CORTEXA8_PLAT_LPC (MX51_CORTEXA8_BASE + 0xC)
-#define MXC_CORTEXA8_PLAT_NEON_LPC (MX51_CORTEXA8_BASE + 0x10)
-#define MXC_CORTEXA8_PLAT_ICGC (MX51_CORTEXA8_BASE + 0x14)
-#define MXC_CORTEXA8_PLAT_AMC (MX51_CORTEXA8_BASE + 0x18)
-#define MXC_CORTEXA8_PLAT_NMC (MX51_CORTEXA8_BASE + 0x20)
-#define MXC_CORTEXA8_PLAT_NMS (MX51_CORTEXA8_BASE + 0x24)
-
-/* DVFS CORE */
-#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00)
-#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04)
-#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08)
-#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C)
-#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10)
-#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14)
-#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18)
-#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C)
-#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20)
-#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24)
-#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28)
-#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C)
-#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30)
-#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34)
-#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38)
-#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C)
-#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40)
-
-/* GPC */
-#define MXC_GPC_CNTR (MX51_GPC_BASE + 0x0)
-#define MXC_GPC_PGR (MX51_GPC_BASE + 0x4)
-#define MXC_GPC_VCR (MX51_GPC_BASE + 0x8)
-#define MXC_GPC_ALL_PU (MX51_GPC_BASE + 0xC)
-#define MXC_GPC_NEON (MX51_GPC_BASE + 0x10)
-#define MXC_GPC_PGR_ARMPG_OFFSET 8
-#define MXC_GPC_PGR_ARMPG_MASK (3 << 8)
-
-/* PGC */
-#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0)
-#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC)
-#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0)
-#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC)
-#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0)
-#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC)
-
-#define MXC_PGCR_PCR 1
-#define MXC_SRPGCR_PCR 1
-#define MXC_EMPGCR_PCR 1
-#define MXC_PGSR_PSR 1
-
-
-#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
-#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
-
-/* SRPG */
-#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0)
-#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4)
-#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8)
-
-#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0)
-#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4)
-#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0)
-#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4)
-#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0)
-#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4)
-#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8)
-
-#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0)
-#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4)
-#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8)
-
-#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0)
-#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4)
-#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8)
-
-#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
deleted file mode 100644
index 26389f3..0000000
--- a/arch/arm/mach-imx/devices-imx51.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx51_fec_data;
-#define imx51_add_fec(pdata) \
- imx_add_fec(&imx51_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
-#define imx51_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
-#define imx51_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-#define imx51_add_hsi2c(pdata) \
- imx51_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
-#define imx51_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
-#define imx51_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
-
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
-#define imx51_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
-#define imx51_add_mxc_ehci_hs(id, pdata) \
- imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
-#define imx51_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
-#define imx51_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx51_cspi_data;
-#define imx51_add_cspi(pdata) \
- imx_add_spi_imx(&imx51_cspi_data, pdata)
-
-extern const struct imx_spi_imx_data imx51_ecspi_data[];
-#define imx51_add_ecspi(id, pdata) \
- imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id) \
- imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
-
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
-#define imx51_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx51_pata_imx_data;
-#define imx51_add_pata_imx() \
- imx_add_pata_imx(&imx51_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 2d260a5..1d2cc18 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -1,6 +1,6 @@
config IMX_HAVE_PLATFORM_FEC
bool
- default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
+ default y if SOC_IMX25 || SOC_IMX27 || SOC_IMX35
config IMX_HAVE_PLATFORM_FLEXCAN
bool
@@ -10,7 +10,6 @@
config IMX_HAVE_PLATFORM_GPIO_KEYS
bool
- default y if SOC_IMX51
config IMX_HAVE_PLATFORM_IMX21_HCD
bool
@@ -43,15 +42,9 @@
config IMX_HAVE_PLATFORM_IMX_UART
bool
-config IMX_HAVE_PLATFORM_IMX_UDC
- bool
-
config IMX_HAVE_PLATFORM_IPU_CORE
bool
-config IMX_HAVE_PLATFORM_MX1_CAMERA
- bool
-
config IMX_HAVE_PLATFORM_MX2_CAMERA
bool
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index 1cbc14c..8fdb12b 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -16,9 +16,7 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 61352a8..67f7fb1 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -176,22 +176,6 @@
const struct imx_imx_uart_1irq_data *data,
const struct imxuart_platform_data *pdata);
-#include <linux/platform_data/usb-imx_udc.h>
-struct imx_imx_udc_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq0;
- resource_size_t irq1;
- resource_size_t irq2;
- resource_size_t irq3;
- resource_size_t irq4;
- resource_size_t irq5;
- resource_size_t irq6;
-};
-struct platform_device *__init imx_add_imx_udc(
- const struct imx_imx_udc_data *data,
- const struct imxusb_platform_data *pdata);
-
#include <linux/platform_data/video-mx3fb.h>
#include <linux/platform_data/camera-mx3.h>
struct imx_ipu_core_data {
@@ -208,16 +192,6 @@
const struct imx_ipu_core_data *data,
struct mx3fb_platform_data *pdata);
-#include <linux/platform_data/camera-mx1.h>
-struct imx_mx1_camera_data {
- resource_size_t iobase;
- resource_size_t iosize;
- resource_size_t irq;
-};
-struct platform_device *__init imx_add_mx1_camera(
- const struct imx_mx1_camera_data *data,
- const struct mx1_camera_pdata *pdata);
-
#include <linux/platform_data/camera-mx2.h>
struct imx_mx2_camera_data {
const char *devid;
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
index 63eba08..d86f925 100644
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ b/arch/arm/mach-imx/devices/platform-fec.c
@@ -35,18 +35,6 @@
imx_fec_data_entry_single(MX35, "imx27-fec");
#endif
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx27 type fec */
-const struct imx_fec_data imx51_fec_data __initconst =
- imx_fec_data_entry_single(MX51, "imx27-fec");
-#endif
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx25 type fec */
-const struct imx_fec_data imx53_fec_data __initconst =
- imx_fec_data_entry_single(MX53, "imx25-fec");
-#endif
-
struct platform_device *__init imx_add_fec(
const struct imx_fec_data *data,
const struct fec_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 3c06bd9..23b0061 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -38,11 +38,6 @@
imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
-#endif
-
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index 57d342e..644ac26 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -70,32 +70,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
-#define imx51_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K)
- imx51_imx_i2c_data_entry(0, 1),
- imx51_imx_i2c_data_entry(1, 2),
- {
- .devid = "imx21-i2c",
- .id = 2,
- .iobase = MX51_HSI2C_DMA_BASE_ADDR,
- .iosize = SZ_16K,
- .irq = MX51_INT_HS_I2C,
- },
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
-#define imx53_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K)
- imx53_imx_i2c_data_entry(0, 1),
- imx53_imx_i2c_data_entry(1, 2),
- imx53_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c
index 8f22a4c..f42200b 100644
--- a/arch/arm/mach-imx/devices/platform-imx-keypad.c
+++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c
@@ -41,16 +41,6 @@
imx_imx_keypad_data_entry_single(MX35, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX51, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX53, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c
index bfcb8f3..1c7c721 100644
--- a/arch/arm/mach-imx/devices/platform-imx-ssi.c
+++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c
@@ -66,26 +66,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
-#define imx51_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
- imx51_imx_ssi_data_entry(0, 1),
- imx51_imx_ssi_data_entry(1, 2),
- imx51_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = {
-#define imx53_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K)
- imx53_imx_ssi_data_entry(0, 1),
- imx53_imx_ssi_data_entry(1, 2),
- imx53_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_ssi(
const struct imx_imx_ssi_data *data,
const struct imx_ssi_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index faac4aa..8c01836 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -94,28 +94,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
-#define imx51_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
- imx51_imx_uart_data_entry(0, 1),
- imx51_imx_uart_data_entry(1, 2),
- imx51_imx_uart_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = {
-#define imx53_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX53, _id, _hwid, SZ_4K)
- imx53_imx_uart_data_entry(0, 1),
- imx53_imx_uart_data_entry(1, 2),
- imx53_imx_uart_data_entry(2, 3),
- imx53_imx_uart_data_entry(3, 4),
- imx53_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx_uart_3irq(
const struct imx_imx_uart_3irq_data *data,
const struct imxuart_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
index ec75d64..54f63bc 100644
--- a/arch/arm/mach-imx/devices/platform-imx2-wdt.c
+++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
@@ -45,24 +45,6 @@
imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = {
-#define imx51_imx2_wdt_data_entry(_id, _hwid) \
- imx_imx2_wdt_data_entry(MX51, _id, _hwid, SZ_16K)
- imx51_imx2_wdt_data_entry(0, 1),
- imx51_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst = {
-#define imx53_imx2_wdt_data_entry(_id, _hwid) \
- imx_imx2_wdt_data_entry(MX53, _id, _hwid, SZ_16K)
- imx53_imx2_wdt_data_entry(0, 1),
- imx53_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_imx2_wdt(
const struct imx_imx2_wdt_data *data)
{
diff --git a/arch/arm/mach-imx/devices/platform-imx_udc.c b/arch/arm/mach-imx/devices/platform-imx_udc.c
deleted file mode 100644
index 5ced7e4..0000000
--- a/arch/arm/mach-imx/devices/platform-imx_udc.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imx_udc_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _USBD_BASE_ADDR, \
- .iosize = _size, \
- .irq0 = soc ## _INT_USBD0, \
- .irq1 = soc ## _INT_USBD1, \
- .irq2 = soc ## _INT_USBD2, \
- .irq3 = soc ## _INT_USBD3, \
- .irq4 = soc ## _INT_USBD4, \
- .irq5 = soc ## _INT_USBD5, \
- .irq6 = soc ## _INT_USBD6, \
- }
-
-#define imx_imx_udc_data_entry(soc, _size) \
- [_id] = imx_imx_udc_data_entry_single(soc, _size)
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_udc_data imx1_imx_udc_data __initconst =
- imx_imx_udc_data_entry_single(MX1, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_imx_udc(
- const struct imx_imx_udc_data *data,
- const struct imxusb_platform_data *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq0,
- .end = data->irq0,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq1,
- .end = data->irq1,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq2,
- .end = data->irq2,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq3,
- .end = data->irq3,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq4,
- .end = data->irq4,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq5,
- .end = data->irq5,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = data->irq6,
- .end = data->irq6,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("imx_udc", 0,
- res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c
deleted file mode 100644
index 2c67881..0000000
--- a/arch/arm/mach-imx/devices/platform-mx1-camera.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mx1_camera_data_entry_single(soc, _size) \
- { \
- .iobase = soc ## _CSI ## _BASE_ADDR, \
- .iosize = _size, \
- .irq = soc ## _INT_CSI, \
- }
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
- imx_mx1_camera_data_entry_single(MX1, 10);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_mx1_camera(
- const struct imx_mx1_camera_data *data,
- const struct mx1_camera_pdata *pdata)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + data->iosize - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- return imx_add_platform_device_dmamask("mx1-camera", 0,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/arch/arm/mach-imx/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
index 5d4bbbf..2963536 100644
--- a/arch/arm/mach-imx/devices/platform-mxc-ehci.c
+++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
@@ -50,15 +50,6 @@
imx_mxc_ehci_data_entry_single(MX35, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
-const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
- imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
- imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c
index 7af1c53..fa618a3 100644
--- a/arch/arm/mach-imx/devices/platform-mxc_nand.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c
@@ -54,11 +54,6 @@
imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
#endif
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
- imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K);
-#endif
-
struct platform_device *__init imx_add_mxc_nand(
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-mxc_rnga.c b/arch/arm/mach-imx/devices/platform-mxc_rnga.c
index c58404b..851fbc8a 100644
--- a/arch/arm/mach-imx/devices/platform-mxc_rnga.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_rnga.c
@@ -48,9 +48,6 @@
#endif /* if defined(CONFIG_SOC_IMX31) */
ret = ERR_PTR(-ENODEV);
- if (IS_ERR(ret))
- return PTR_ERR(ret);
-
- return 0;
+ return PTR_ERR_OR_ZERO(ret);
}
arch_initcall(imxXX_add_mxc_rnga);
diff --git a/arch/arm/mach-imx/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c
index e4ec11c..1c7f895 100644
--- a/arch/arm/mach-imx/devices/platform-pata_imx.c
+++ b/arch/arm/mach-imx/devices/platform-pata_imx.c
@@ -28,16 +28,6 @@
imx_pata_imx_data_entry_single(MX35, SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_pata_imx_data imx51_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX51, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_pata_imx_data imx53_pata_imx_data __initconst =
- imx_pata_imx_data_entry_single(MX53, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_pata_imx(
const struct imx_pata_imx_data *data)
{
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index e66a4e3..fb8d4a2 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -43,30 +43,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-const struct imx_sdhci_esdhc_imx_data
-imx51_sdhci_esdhc_imx_data[] __initconst = {
-#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX51, "sdhci-esdhc-imx51", _id, _hwid)
- imx51_sdhci_esdhc_imx_data_entry(0, 1),
- imx51_sdhci_esdhc_imx_data_entry(1, 2),
- imx51_sdhci_esdhc_imx_data_entry(2, 3),
- imx51_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_sdhci_esdhc_imx_data
-imx53_sdhci_esdhc_imx_data[] __initconst = {
-#define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid) \
- imx_sdhci_esdhc_imx_data_entry(MX53, "sdhci-esdhc-imx53", _id, _hwid)
- imx53_sdhci_esdhc_imx_data_entry(0, 1),
- imx53_sdhci_esdhc_imx_data_entry(1, 2),
- imx53_sdhci_esdhc_imx_data_entry(2, 3),
- imx53_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
.wp_type = ESDHC_WP_NONE,
.cd_type = ESDHC_CD_NONE,
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
index 8880bcb..aca825d 100644
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -79,33 +79,6 @@
};
#endif /* ifdef CONFIG_SOC_IMX35 */
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx51_cspi_data __initconst =
- imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K);
-
-const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
-#define imx51_ecspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
- imx51_ecspi_data_entry(0, 1),
- imx51_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx53_cspi_data __initconst =
- imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 2, , SZ_4K);
-
-/* i.mx53 has the i.mx51 type ecspi */
-const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
-#define imx53_ecspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
- imx53_ecspi_data_entry(0, 1),
- imx53_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata)
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 134c190..42a5a3d 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
index 448d911..c569743 100644
--- a/arch/arm/mach-imx/ehci-imx27.c
+++ b/arch/arm/mach-imx/ehci-imx27.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
index 05de4e1..bede21d 100644
--- a/arch/arm/mach-imx/ehci-imx31.c
+++ b/arch/arm/mach-imx/ehci-imx31.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 554e7cc..f424a54 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c
deleted file mode 100644
index e49710b..0000000
--- a/arch/arm/mach-imx/ehci-imx5.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "hardware.h"
-
-#define MXC_OTG_OFFSET 0
-#define MXC_H1_OFFSET 0x200
-#define MXC_H2_OFFSET 0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) /* OTG Polarity of Overcurrent */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_POL_BIT (1 << 6) /* UH1 Polarity of Overcurrent */
-#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */
-#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* OTG Power Pin Polarity */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT (1 << 4)
-
-#define MXC_USBCMD_OFFSET 0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK (~(0xff << 16)) /* Interrupt Threshold Control */
-
-int mx51_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
- void __iomem *usb_base;
- void __iomem *usbotg_base;
- void __iomem *usbother_base;
- int ret = 0;
-
- usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
- if (!usb_base) {
- printk(KERN_ERR "%s(): ioremap failed\n", __func__);
- return -ENOMEM;
- }
-
- switch (port) {
- case 0: /* OTG port */
- usbotg_base = usb_base + MXC_OTG_OFFSET;
- break;
- case 1: /* Host 1 port */
- usbotg_base = usb_base + MXC_H1_OFFSET;
- break;
- case 2: /* Host 2 port */
- usbotg_base = usb_base + MXC_H2_OFFSET;
- break;
- default:
- printk(KERN_ERR"%s no such port %d\n", __func__, port);
- ret = -ENOENT;
- goto error;
- }
- usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
- switch (port) {
- case 0: /*OTG port */
- if (flags & MXC_EHCI_INTERNAL_PHY) {
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
- v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
- else
- v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
- if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
- /* OC/USBPWR is used */
- v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
- } else {
- /* OC/USBPWR is not used */
- v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
- }
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
- else
- v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED)
- v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
- else
- v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_OTG_UCTRL_OPM_BIT;
- else
- v |= MXC_OTG_UCTRL_OPM_BIT;
- __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
- }
- break;
- case 1: /* Host 1 */
- /*Host ULPI */
- v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED) {
- /* HOST1 wakeup/ULPI intr enable */
- v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
- } else {
- /* HOST1 wakeup/ULPI intr disable */
- v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
- }
-
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
- else
- v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
- __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
- v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
- if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
- v |= MXC_H1_OC_POL_BIT;
- else
- v &= ~MXC_H1_OC_POL_BIT;
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
- else
- v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
- __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
- v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
- if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
- /* Interrupt Threshold Control:Immediate (no threshold) */
- v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
- __raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
- break;
- case 2: /* Host 2 ULPI */
- v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
- if (flags & MXC_EHCI_WAKEUP_ENABLED) {
- /* HOST1 wakeup/ULPI intr enable */
- v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
- } else {
- /* HOST1 wakeup/ULPI intr disable */
- v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
- }
-
- if (flags & MXC_EHCI_POWER_PINS_ENABLED)
- v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
- else
- v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
- __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
- break;
- }
-
-error:
- iounmap(usb_base);
- return ret;
-}
-
diff --git a/arch/arm/mach-imx/ehci.h b/arch/arm/mach-imx/ehci.h
new file mode 100644
index 0000000..0e06002
--- /dev/null
+++ b/arch/arm/mach-imx/ehci.h
@@ -0,0 +1,43 @@
+#ifndef __MACH_IMX_EHCI_H
+#define __MACH_IMX_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
+#define MXC_EHCI_FORCE_FS (1 << 24)
+#define MXC_EHCI_UTMI_8BIT (0 << 28)
+#define MXC_EHCI_UTMI_16BIT (1 << 28)
+#define MXC_EHCI_SERIAL (1 << 29)
+#define MXC_EHCI_MODE_UTMI (0 << 30)
+#define MXC_EHCI_MODE_PHILIPS (1 << 30)
+#define MXC_EHCI_MODE_ULPI (2 << 30)
+#define MXC_EHCI_MODE_SERIAL (3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
+#define MXC_EHCI_INTERFACE_MASK (0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
+#define MXC_EHCI_TTL_ENABLED (1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY (1 << 9)
+#define MXC_EHCI_IPPUE_DOWN (1 << 10)
+#define MXC_EHCI_IPPUE_UP (1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
+
+#define MXC_USBCTRL_OFFSET 0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
+#define MXC_USBH2CTRL_OFFSET 0x14
+
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __MACH_IMX_EHCI_H */
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 586e017..82ea74e 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -27,13 +27,14 @@
static u32 gpc_wake_irqs[IMR_NUM];
static u32 gpc_saved_imrs[IMR_NUM];
-void imx_gpc_pre_suspend(void)
+void imx_gpc_pre_suspend(bool arm_power_off)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
int i;
/* Tell GPC to power off ARM core when suspend */
- writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+ if (arm_power_off)
+ writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
for (i = 0; i < IMR_NUM; i++) {
gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index abf43bb..66b2b56 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -105,8 +105,6 @@
#include "mxc.h"
-#include "mx51.h"
-#include "mx53.h"
#include "mx3x.h"
#include "mx31.h"
#include "mx35.h"
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 42a65e0..cf8032b 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -29,16 +29,10 @@
NULL
};
-static void __init imx25_timer_init(void)
-{
- mx25_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .init_time = imx25_timer_init,
.init_machine = imx25_dt_init,
.dt_compat = imx25_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 17bd405..080e66c 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -34,16 +34,10 @@
NULL
};
-static void __init imx27_timer_init(void)
-{
- mx27_clocks_init_dt();
-}
-
DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .init_time = imx27_timer_init,
.init_machine = imx27_dt_init,
.dt_compat = imx27_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index 581f4d6..418dbc8 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -25,7 +25,7 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *imx31_dt_board_compat[] __initconst = {
+static const char * const imx31_dt_board_compat[] __initconst = {
"fsl,imx31",
NULL
};
diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c
index a62854c..584fbe1 100644
--- a/arch/arm/mach-imx/imx35-dt.c
+++ b/arch/arm/mach-imx/imx35-dt.c
@@ -34,7 +34,7 @@
mx35_init_irq();
}
-static const char *imx35_dt_board_compat[] __initconst = {
+static const char * const imx35_dt_board_compat[] __initconst = {
"fsl,imx35",
NULL
};
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
deleted file mode 100644
index b8cd968..0000000
--- a/arch/arm/mach-imx/imx51-dt.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "mx51.h"
-
-static void __init imx51_dt_init(void)
-{
- struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
-
- mxc_arch_reset_init_dt();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- platform_device_register_full(&devinfo);
-}
-
-static const char *imx51_dt_board_compat[] __initconst = {
- "fsl,imx51",
- NULL
-};
-
-DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
- .map_io = mx51_map_io,
- .init_early = imx51_init_early,
- .init_irq = mx51_init_irq,
- .init_machine = imx51_dt_init,
- .init_late = imx51_init_late,
- .dt_compat = imx51_dt_board_compat,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/iomux-mx51.h b/arch/arm/mach-imx/iomux-mx51.h
deleted file mode 100644
index 75bbcc4..0000000
--- a/arch/arm/mach-imx/iomux-mx51.h
+++ /dev/null
@@ -1,827 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX51_H__
-#define __MACH_IOMUX_MX51_H__
-
-#include "iomux-v3.h"
-#define __NA_ 0x000
-
-
-/* Pad control groupings */
-#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_HYS | PAD_CTL_SRE_FAST)
-#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS)
-#define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS)
-#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
- PAD_CTL_HYS | PAD_CTL_PUE)
-#define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \
- PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
-#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \
- PAD_CTL_SRE_FAST | PAD_CTL_DVS)
-#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST)
-
-#define MX51_PAD_CTRL_2 (PAD_CTL_PKE | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_CTRL_4 (PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
-
-/*
- * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
- * See also iomux-v3.h
- */
-
-/* Raw pin modes without pad control */
-/* PAD MUX ALT INPSE PATH PADCTRL */
-
-/* The same pins as above but with the default pad control values applied */
-#define MX51_PAD_EIM_D16__AUD4_RXFS IOMUX_PAD(0x3f0, 0x05c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__AUD5_TXD IOMUX_PAD(0x3f0, 0x05c, 7, 0x8d8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__GPIO2_0 IOMUX_PAD(0x3f0, 0x05c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, 0x14, 0x9b4, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D16__UART2_CTS IOMUX_PAD(0x3f0, 0x05c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D16__USBH2_DATA0 IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__AUD5_RXD IOMUX_PAD(0x3f4, 0x060, 7, 0x8d4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__GPIO2_1 IOMUX_PAD(0x3f4, 0x060, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__UART2_RXD IOMUX_PAD(0x3f4, 0x060, 3, 0x9ec, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D17__UART3_CTS IOMUX_PAD(0x3f4, 0x060, 4, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D17__USBH2_DATA1 IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__AUD5_TXC IOMUX_PAD(0x3f8, 0x064, 7, 0x8e4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__GPIO2_2 IOMUX_PAD(0x3f8, 0x064, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__UART2_TXD IOMUX_PAD(0x3f8, 0x064, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D18__UART3_RTS IOMUX_PAD(0x3f8, 0x064, 4, 0x9f0, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D18__USBH2_DATA2 IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__AUD4_RXC IOMUX_PAD(0x3fc, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__AUD5_TXFS IOMUX_PAD(0x3fc, 0x068, 7, 0x8e8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__GPIO2_3 IOMUX_PAD(0x3fc, 0x068, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, 0x14, 0x9b0, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D19__UART2_RTS IOMUX_PAD(0x3fc, 0x068, 3, 0x9e8, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D19__USBH2_DATA3 IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__AUD4_TXD IOMUX_PAD(0x400, 0x06c, 5, 0x8c8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__EIM_D20 IOMUX_PAD(0x400, 0x06c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__GPIO2_4 IOMUX_PAD(0x400, 0x06c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB IOMUX_PAD(0x400, 0x06c, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__USBH2_DATA4 IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__AUD4_RXD IOMUX_PAD(0x404, 0x070, 5, 0x8c4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__EIM_D21 IOMUX_PAD(0x404, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__GPIO2_5 IOMUX_PAD(0x404, 0x070, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB IOMUX_PAD(0x404, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__USBH2_DATA5 IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__AUD4_TXC IOMUX_PAD(0x408, 0x074, 5, 0x8cc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__EIM_D22 IOMUX_PAD(0x408, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__GPIO2_6 IOMUX_PAD(0x408, 0x074, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__USBH2_DATA6 IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__AUD4_TXFS IOMUX_PAD(0x40c, 0x078, 5, 0x8d0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__EIM_D23 IOMUX_PAD(0x40c, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__GPIO2_7 IOMUX_PAD(0x40c, 0x078, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__SPDIF_OUT1 IOMUX_PAD(0x40c, 0x078, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__USBH2_DATA7 IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__AUD6_RXFS IOMUX_PAD(0x410, 0x07c, 5, 0x8f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__EIM_D24 IOMUX_PAD(0x410, 0x07c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__GPIO2_8 IOMUX_PAD(0x410, 0x07c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__I2C2_SDA IOMUX_PAD(0x410, 0x07c, 0x14, 0x9bc, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D24__USBOTG_DATA0 IOMUX_PAD(0x410, 0x07c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__EIM_D25 IOMUX_PAD(0x414, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__KEY_COL6 IOMUX_PAD(0x414, 0x080, 1, 0x9c8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__GPT_CMPOUT1 IOMUX_PAD(0x414, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__GPT_CMPOUT2 IOMUX_PAD(0x418, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__I2C2_SCL IOMUX_PAD(0x41c, 0x088, 0x14, 0x9b8, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D27__USBOTG_DATA3 IOMUX_PAD(0x41c, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__AUD6_TXD IOMUX_PAD(0x420, 0x08c, 5, 0x8f0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__KEY_ROW4 IOMUX_PAD(0x420, 0x08c, 1, 0x9d0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__USBOTG_DATA4 IOMUX_PAD(0x420, 0x08c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__AUD6_RXD IOMUX_PAD(0x424, 0x090, 5, 0x8ec, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__KEY_ROW5 IOMUX_PAD(0x424, 0x090, 1, 0x9d4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__USBOTG_DATA5 IOMUX_PAD(0x424, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__AUD6_TXC IOMUX_PAD(0x428, 0x094, 5, 0x8fc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__KEY_ROW6 IOMUX_PAD(0x428, 0x094, 1, 0x9d8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__USBOTG_DATA6 IOMUX_PAD(0x428, 0x094, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__AUD6_TXFS IOMUX_PAD(0x42c, 0x098, 5, 0x900, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__KEY_ROW7 IOMUX_PAD(0x42c, 0x098, 1, 0x9dc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__USBOTG_DATA7 IOMUX_PAD(0x42c, 0x098, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__EIM_A16 IOMUX_PAD(0x430, 0x09c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__GPIO2_10 IOMUX_PAD(0x430, 0x09c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 IOMUX_PAD(0x430, 0x09c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__GPIO2_11 IOMUX_PAD(0x434, 0x0a0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 IOMUX_PAD(0x434, 0x0a0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__BOOT_LPB0 IOMUX_PAD(0x438, 0x0a4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__GPIO2_12 IOMUX_PAD(0x438, 0x0a4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__BOOT_LPB1 IOMUX_PAD(0x43c, 0x0a8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__GPIO2_13 IOMUX_PAD(0x43c, 0x0a8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 IOMUX_PAD(0x440, 0x0ac, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__GPIO2_14 IOMUX_PAD(0x440, 0x0ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 IOMUX_PAD(0x444, 0x0b0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__GPIO2_15 IOMUX_PAD(0x444, 0x0b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x448, 0x0b4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN IOMUX_PAD(0x44c, 0x0b8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__GPIO2_17 IOMUX_PAD(0x44c, 0x0b8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__GPIO2_18 IOMUX_PAD(0x450, 0x0bc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__USBH2_CLK IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__DISP1_PIN4 IOMUX_PAD(0x454, 0x0c0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__GPIO2_19 IOMUX_PAD(0x454, 0x0c0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__USBH2_DIR IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN IOMUX_PAD(0x458, 0x0c4, 5, 0x9a0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK IOMUX_PAD(0x458, 0x0c4, 6, 0x908, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__GPIO2_20 IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__USBH2_STP IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN IOMUX_PAD(0x45c, 0x0c8, 5, 0x99c, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__DISP1_PIN1 IOMUX_PAD(0x45c, 0x0c8, 6, 0x9a4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__GPIO2_21 IOMUX_PAD(0x45c, 0x0c8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__USBH2_NXT IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__AUD5_RXFS IOMUX_PAD(0x468, 0x0d4, 6, 0x8e0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__CSI1_D2 IOMUX_PAD(0x468, 0x0d4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__FEC_MDIO (IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, 0) | \
- MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
- PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS))
-#define MX51_PAD_EIM_EB2__GPIO2_22 IOMUX_PAD(0x468, 0x0d4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 IOMUX_PAD(0x468, 0x0d4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__AUD5_RXC IOMUX_PAD(0x46c, 0x0d8, 6, 0x8dc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__CSI1_D3 IOMUX_PAD(0x46c, 0x0d8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__FEC_RDATA1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__GPIO2_23 IOMUX_PAD(0x46c, 0x0d8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 IOMUX_PAD(0x46c, 0x0d8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_OE__EIM_OE IOMUX_PAD(0x470, 0x0dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_OE__GPIO2_24 IOMUX_PAD(0x470, 0x0dc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__GPIO2_25 IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__GPIO2_26 IOMUX_PAD(0x478, 0x0e4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__AUD5_TXD IOMUX_PAD(0x47c, 0x0e8, 6, 0x8d8, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__CSI1_D4 IOMUX_PAD(0x47c, 0x0e8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__FEC_RDATA2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x960, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__GPIO2_27 IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__USBOTG_STP IOMUX_PAD(0x47c, 0x0e8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__AUD5_RXD IOMUX_PAD(0x480, 0x0ec, 6, 0x8d4, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__CSI1_D5 IOMUX_PAD(0x480, 0x0ec, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__FEC_RDATA3 IOMUX_PAD(0x480, 0x0ec, 3, 0x964, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__GPIO2_28 IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__USBOTG_NXT IOMUX_PAD(0x480, 0x0ec, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__AUD5_TXC IOMUX_PAD(0x484, 0x0f0, 6, 0x8e4, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__CSI1_D6 IOMUX_PAD(0x484, 0x0f0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x970, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS4__GPIO2_29 IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__USBOTG_CLK IOMUX_PAD(0x484, 0x0f0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__AUD5_TXFS IOMUX_PAD(0x488, 0x0f4, 6, 0x8e8, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__CSI1_D7 IOMUX_PAD(0x488, 0x0f4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK IOMUX_PAD(0x488, 0x0f4, 4, 0x904, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x950, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS5__GPIO2_30 IOMUX_PAD(0x488, 0x0f4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__USBOTG_DIR IOMUX_PAD(0x488, 0x0f4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DTACK__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DTACK__GPIO2_31 IOMUX_PAD(0x48c, 0x0f8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__EIM_LBA IOMUX_PAD(0x494, 0x0fc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__GPIO3_1 IOMUX_PAD(0x494, 0x0fc, 1, 0x978, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__CCM_CLKO IOMUX_PAD(0x4d0, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0 IOMUX_PAD(0x4e4, 0x108, 2, 0x93c, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__GPIO3_4 IOMUX_PAD(0x4e8, 0x10c, 3, 0x984, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x4e8, 0x10c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1 IOMUX_PAD(0x4e8, 0x10c, 2, 0x940, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__GPIO3_5 IOMUX_PAD(0x4ec, 0x110, 3, 0x988, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x4ec, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__GPIO3_6 IOMUX_PAD(0x4f0, 0x114, 3, 0x98c, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x4f0, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__GPIO3_7 IOMUX_PAD(0x4f4, 0x118, 3, 0x990, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x4f4, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2 IOMUX_PAD(0x4f4, 0x118, 2, 0x944, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 IOMUX_PAD(0x4f8, 0x11c, 5, 0x930, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__GPIO3_8 IOMUX_PAD(0x4f8, 0x11c, 3, 0x994, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x4f8, 0x11c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__SD3_DATA3 IOMUX_PAD(0x4f8, 0x11c, 2, 0x948, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI IOMUX_PAD(0x4fc, 0x120, 6, 0x91c, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY IOMUX_PAD(0x4fc, 0x120, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__GPT_CMPOUT2 IOMUX_PAD(0x4fc, 0x120, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__GPT_CMPOUT3 IOMUX_PAD(0x500, 0x124, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__GPIO3_17 IOMUX_PAD(0x51c, 0x134, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x51c, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK IOMUX_PAD(0x520, 0x138, 6, 0x914, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS2__GPIO3_18 IOMUX_PAD(0x520, 0x138, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 0x17, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__PATA_DA_0 IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__SD4_DAT1 IOMUX_PAD(0x528, 0x140, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__USBH3_STP IOMUX_PAD(0x528, 0x140, 7, 0xa24, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2 IOMUX_PAD(0x52c, 0x144, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS5__GPIO3_21 IOMUX_PAD(0x52c, 0x144, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__NANDF_CS5 IOMUX_PAD(0x52c, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__PATA_DA_1 IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__SD4_DAT2 IOMUX_PAD(0x52c, 0x144, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__USBH3_DIR IOMUX_PAD(0x52c, 0x144, 7, 0xa1c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__CSPI_SS3 IOMUX_PAD(0x530, 0x148, 7, 0x928, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3 IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS6__GPIO3_22 IOMUX_PAD(0x530, 0x148, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__PATA_DA_2 IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__SD4_DAT3 IOMUX_PAD(0x530, 0x148, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS7__GPIO3_23 IOMUX_PAD(0x534, 0x14c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__NANDF_CS7 IOMUX_PAD(0x534, 0x14c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__SD3_CLK IOMUX_PAD(0x534, 0x14c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 IOMUX_PAD(0x538, 0x150, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__PATA_DATA15 IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__SD3_DAT7 IOMUX_PAD(0x53c, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3 IOMUX_PAD(0x540, 0x158, 2, 0x934, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__GPIO3_26 IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__NANDF_D14 IOMUX_PAD(0x540, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__PATA_DATA14 IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__SD3_DAT6 IOMUX_PAD(0x540, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2 IOMUX_PAD(0x544, 0x15c, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__GPIO3_27 IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__NANDF_D13 IOMUX_PAD(0x544, 0x15c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__PATA_DATA13 IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__SD3_DAT5 IOMUX_PAD(0x544, 0x15c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1 IOMUX_PAD(0x548, 0x160, 2, 0x930, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__GPIO3_28 IOMUX_PAD(0x548, 0x160, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__NANDF_D12 IOMUX_PAD(0x548, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__PATA_DATA12 IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__SD3_DAT4 IOMUX_PAD(0x548, 0x160, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__FEC_RX_DV IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__GPIO3_29 IOMUX_PAD(0x54c, 0x164, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__NANDF_D11 IOMUX_PAD(0x54c, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__PATA_DATA11 IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__SD3_DATA3 IOMUX_PAD(0x54c, 0x164, 5, 0x948, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__GPIO3_30 IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__NANDF_D10 IOMUX_PAD(0x550, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__PATA_DATA10 IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__SD3_DATA2 IOMUX_PAD(0x550, 0x168, 5, 0x944, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__FEC_RDATA0 IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_D9__GPIO3_31 IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__NANDF_D9 IOMUX_PAD(0x554, 0x16c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__PATA_DATA9 IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__SD3_DATA1 IOMUX_PAD(0x554, 0x16c, 5, 0x940, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__FEC_TDATA0 IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_D8__GPIO4_0 IOMUX_PAD(0x558, 0x170, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__NANDF_D8 IOMUX_PAD(0x558, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__PATA_DATA8 IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__SD3_DATA0 IOMUX_PAD(0x558, 0x170, 5, 0x93c, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__GPIO4_1 IOMUX_PAD(0x55c, 0x174, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__NANDF_D7 IOMUX_PAD(0x55c, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__PATA_DATA7 IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__USBH3_DATA0 IOMUX_PAD(0x55c, 0x174, 5, 0x9fc, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__GPIO4_2 IOMUX_PAD(0x560, 0x178, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__NANDF_D6 IOMUX_PAD(0x560, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__PATA_DATA6 IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__SD4_LCTL IOMUX_PAD(0x560, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__USBH3_DATA1 IOMUX_PAD(0x560, 0x178, 5, 0xa00, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__GPIO4_3 IOMUX_PAD(0x564, 0x17c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__NANDF_D5 IOMUX_PAD(0x564, 0x17c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__PATA_DATA5 IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__SD4_WP IOMUX_PAD(0x564, 0x17c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__USBH3_DATA2 IOMUX_PAD(0x564, 0x17c, 5, 0xa04, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__GPIO4_4 IOMUX_PAD(0x568, 0x180, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__PATA_DATA4 IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__SD4_CD IOMUX_PAD(0x568, 0x180, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__USBH3_DATA3 IOMUX_PAD(0x568, 0x180, 5, 0xa08, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__GPIO4_5 IOMUX_PAD(0x56c, 0x184, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__NANDF_D3 IOMUX_PAD(0x56c, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__PATA_DATA3 IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__SD4_DAT4 IOMUX_PAD(0x56c, 0x184, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__USBH3_DATA4 IOMUX_PAD(0x56c, 0x184, 5, 0xa0c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__GPIO4_6 IOMUX_PAD(0x570, 0x188, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__NANDF_D2 IOMUX_PAD(0x570, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__PATA_DATA2 IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__SD4_DAT5 IOMUX_PAD(0x570, 0x188, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__USBH3_DATA5 IOMUX_PAD(0x570, 0x188, 5, 0xa10, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__GPIO4_7 IOMUX_PAD(0x574, 0x18c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__NANDF_D1 IOMUX_PAD(0x574, 0x18c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__PATA_DATA1 IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__SD4_DAT6 IOMUX_PAD(0x574, 0x18c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__USBH3_DATA6 IOMUX_PAD(0x574, 0x18c, 5, 0xa14, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__GPIO4_8 IOMUX_PAD(0x578, 0x190, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__NANDF_D0 IOMUX_PAD(0x578, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__PATA_DATA0 IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__SD4_DAT7 IOMUX_PAD(0x578, 0x190, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__USBH3_DATA7 IOMUX_PAD(0x578, 0x190, 5, 0xa18, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__CSI1_D8 IOMUX_PAD(0x57c, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__GPIO3_12 IOMUX_PAD(0x57c, 0x194, 3, 0x998, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__CSI1_D9 IOMUX_PAD(0x580, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__GPIO3_13 IOMUX_PAD(0x580, 0x198, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1a0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58c, 0x1a4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59c, 0x1b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5a0, 0x1b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5a4, 0x1bc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5a8, 0x1c0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5ac, 0x1c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14 IOMUX_PAD(0x5ac, 0x1c4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5b0, 0x1c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15 IOMUX_PAD(0x5b0, 0x1c8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5b4, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5b8, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__CSI2_D12 IOMUX_PAD(0x5bc, 0x1cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__GPIO4_9 IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__CSI2_D13 IOMUX_PAD(0x5c0, 0x1d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__GPIO4_10 IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D14__CSI2_D14 IOMUX_PAD(0x5c4, 0x1d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D15__CSI2_D15 IOMUX_PAD(0x5c8, 0x1d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D16__CSI2_D16 IOMUX_PAD(0x5cc, 0x1dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D17__CSI2_D17 IOMUX_PAD(0x5d0, 0x1e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__CSI2_D18 IOMUX_PAD(0x5d4, 0x1e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__GPIO4_11 IOMUX_PAD(0x5d4, 0x1e4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__CSI2_D19 IOMUX_PAD(0x5d8, 0x1e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__GPIO4_12 IOMUX_PAD(0x5d8, 0x1e8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC IOMUX_PAD(0x5dc, 0x1ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13 IOMUX_PAD(0x5dc, 0x1ec, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC IOMUX_PAD(0x5e0, 0x1f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14 IOMUX_PAD(0x5e0, 0x1f0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK IOMUX_PAD(0x5e4, 0x1f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 IOMUX_PAD(0x5e4, 0x1f4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__GPIO4_16 IOMUX_PAD(0x5e8, 0x1f8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x5e8, 0x1f8, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__GPIO4_17 IOMUX_PAD(0x5ec, 0x1fc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x5ec, 0x1fc, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD IOMUX_PAD(0x5f0, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 IOMUX_PAD(0x5f0, 0x200, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD IOMUX_PAD(0x5f4, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 IOMUX_PAD(0x5f4, 0x204, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD IOMUX_PAD(0x5f4, 0x204, 1, 0x9f4, 2, MX51_UART_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC IOMUX_PAD(0x5f8, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20 IOMUX_PAD(0x5f8, 0x208, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS IOMUX_PAD(0x5fc, 0x20c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21 IOMUX_PAD(0x5fc, 0x20c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD IOMUX_PAD(0x5fc, 0x20c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22 IOMUX_PAD(0x600, 0x210, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA IOMUX_PAD(0x600, 0x210, 0x11, 0x9b4, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD IOMUX_PAD(0x604, 0x214, 1, 0x8c4, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__GPIO4_23 IOMUX_PAD(0x604, 0x214, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC IOMUX_PAD(0x608, 0x218, 1, 0x8cc, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__GPIO4_24 IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD IOMUX_PAD(0x60c, 0x21c, 1, 0x8c8, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60c, 0x21c, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__GPIO4_25 IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS IOMUX_PAD(0x610, 0x220, 1, 0x8d0, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__GPIO4_26 IOMUX_PAD(0x610, 0x220, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27 IOMUX_PAD(0x614, 0x224, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL IOMUX_PAD(0x614, 0x224, 0x11, 0x9b0, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__GPIO4_28 IOMUX_PAD(0x618, 0x228, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__GPIO4_29 IOMUX_PAD(0x61c, 0x22c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__PWM2_PWMO IOMUX_PAD(0x61c, 0x22c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_RTS__GPIO4_30 IOMUX_PAD(0x620, 0x230, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__GPIO4_31 IOMUX_PAD(0x624, 0x234, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__FIRI_TXD IOMUX_PAD(0x628, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__GPIO1_20 IOMUX_PAD(0x628, 0x238, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__CSI1_D1 IOMUX_PAD(0x634, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__GPIO1_23 IOMUX_PAD(0x634, 0x244, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART1_DSR IOMUX_PAD(0x634, 0x244, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__GPIO1_24 IOMUX_PAD(0x638, 0x248, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT IOMUX_PAD(0x638, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63c, 0x24c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64c, 0x25c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__PLL1_BYP IOMUX_PAD(0x64c, 0x25c, 7, 0x90c, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__PLL2_BYP IOMUX_PAD(0x650, 0x260, 7, 0x910, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__PLL3_BYP IOMUX_PAD(0x654, 0x264, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65c, 0x26c, 0x13, 0x9b8, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65c, 0x26c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1 IOMUX_PAD(0x65c, 0x26c, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART1_RI IOMUX_PAD(0x65c, 0x26c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65c, 0x26c, 2, 0x9f0, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, 0x13, 0x9bc, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART1_DCD IOMUX_PAD(0x660, 0x270, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK IOMUX_PAD(0x678, 0x278, 1, 0x914, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__GPIO1_25 IOMUX_PAD(0x678, 0x278, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__I2C2_SCL IOMUX_PAD(0x678, 0x278, 0x15, 0x9b8, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI IOMUX_PAD(0x67c, 0x27c, 1, 0x91c, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__GPIO1_26 IOMUX_PAD(0x67c, 0x27c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__I2C2_SDA IOMUX_PAD(0x67c, 0x27c, 0x15, 0x9bc, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__CSPI_RDY IOMUX_PAD(0x680, 0x280, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__GPIO1_27 IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__UART3_RXD IOMUX_PAD(0x680, 0x280, 5, 0x9f4, 6, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__CSPI_MISO IOMUX_PAD(0x684, 0x284, 1, 0x918, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__GPIO1_28 IOMUX_PAD(0x684, 0x284, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__UART3_TXD IOMUX_PAD(0x684, 0x284, 5, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__GPIO1_11 IOMUX_PAD(0x688, 0x288, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__UART2_CTS IOMUX_PAD(0x688, 0x288, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__GPIO1_12 IOMUX_PAD(0x68c, 0x28c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x9ec, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x9e8, 5, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0 IOMUX_PAD(0x698, 0x298, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__GPIO1_15 IOMUX_PAD(0x698, 0x298, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1 IOMUX_PAD(0x69c, 0x29c, 1, 0x920, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__GPIO1_16 IOMUX_PAD(0x69c, 0x29c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3 IOMUX_PAD(0x6a0, 0x2a0, 1, 0x928, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__GPIO1_17 IOMUX_PAD(0x6a0, 0x2a0, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 IOMUX_PAD(0x6a4, 0x2a4, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 IOMUX_PAD(0x6a4, 0x2a4, 5, 0x934, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__GPIO1_18 IOMUX_PAD(0x6a4, 0x2a4, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__DI1_PIN11 IOMUX_PAD(0x6a8, 0x2a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 IOMUX_PAD(0x6a8, 0x2a8, 7, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__GPIO3_0 IOMUX_PAD(0x6a8, 0x2a8, 4, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__DI1_PIN12 IOMUX_PAD(0x6ac, 0x2ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__GPIO3_1 IOMUX_PAD(0x6ac, 0x2ac, 4, 0x978, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__DI1_PIN13 IOMUX_PAD(0x6b0, 0x2b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__GPIO3_2 IOMUX_PAD(0x6b0, 0x2b0, 4, 0x97c, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS IOMUX_PAD(0x6b4, 0x2b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__GPIO3_3 IOMUX_PAD(0x6b4, 0x2b4, 4, 0x980, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS IOMUX_PAD(0x6b8, 0x2b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 IOMUX_PAD(0x6b8, 0x2b8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 IOMUX_PAD(0x6b8, 0x2b8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__GPIO3_4 IOMUX_PAD(0x6b8, 0x2b8, 4, 0x984, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 IOMUX_PAD(0x6bc, 0x2bc, 2, 0x9a4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN IOMUX_PAD(0x6bc, 0x2bc, 0, 0x9c4, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 IOMUX_PAD(0x6bc, 0x2bc, 4, 0x988, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 IOMUX_PAD(0x6c0, 0x2c0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO IOMUX_PAD(0x6c0, 0x2c0, 0, 0x9c4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 IOMUX_PAD(0x6c0, 0x2c0, 4, 0x98c, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 IOMUX_PAD(0x6c4, 0x2c4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 IOMUX_PAD(0x6c4, 0x2c4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK IOMUX_PAD(0x6c4, 0x2c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 IOMUX_PAD(0x6c4, 0x2c4, 4, 0x990, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 IOMUX_PAD(0x6c8, 0x2c8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 IOMUX_PAD(0x6c8, 0x2c8, 4, 0x994, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6cc, 0x2cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6d0, 0x2d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6d4, 0x2d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6d8, 0x2d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6dc, 0x2dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6e0, 0x2e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC IOMUX_PAD(0x6e4, 0x2e4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6e4, 0x2e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG IOMUX_PAD(0x6e8, 0x2e8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6e8, 0x2e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 IOMUX_PAD(0x6ec, 0x2ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6ec, 0x2ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 IOMUX_PAD(0x6f0, 0x2f0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6f0, 0x2f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE IOMUX_PAD(0x6f4, 0x2f4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6f4, 0x2f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 IOMUX_PAD(0x6f8, 0x2f8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6f8, 0x2f8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL IOMUX_PAD(0x6fc, 0x2fc, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6fc, 0x2fc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 IOMUX_PAD(0x700, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 IOMUX_PAD(0x704, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH IOMUX_PAD(0x708, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 IOMUX_PAD(0x70c, 0x30c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70c, 0x30c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 IOMUX_PAD(0x710, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 IOMUX_PAD(0x714, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 IOMUX_PAD(0x714, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 IOMUX_PAD(0x714, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 IOMUX_PAD(0x718, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 IOMUX_PAD(0x718, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 IOMUX_PAD(0x718, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 IOMUX_PAD(0x71c, 0x31c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71c, 0x31c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 IOMUX_PAD(0x71c, 0x31c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 IOMUX_PAD(0x71c, 0x31c, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 IOMUX_PAD(0x720, 0x320, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 IOMUX_PAD(0x720, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 IOMUX_PAD(0x720, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 IOMUX_PAD(0x724, 0x324, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS IOMUX_PAD(0x724, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 IOMUX_PAD(0x728, 0x328, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS IOMUX_PAD(0x728, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_DISP_CLK__DI1_DISP_CLK IOMUX_PAD(0x730, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN15__DI1_PIN15 IOMUX_PAD(0x738, __NA_, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO IOMUX_PAD(0x744, 0x33c, 0, 0x9c0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__FEC_TX_ER IOMUX_PAD(0x744, 0x33c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN IOMUX_PAD(0x748, 0x340, 3, 0x99c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__FEC_CRS IOMUX_PAD(0x748, 0x340, 2, 0x950, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74c, 0x344, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__FEC_MDC IOMUX_PAD(0x74c, 0x344, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN3__FEC_MDIO IOMUX_PAD(0x750, 0x348, 2, 0x954, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 IOMUX_PAD(0x754, 0x34c, 2, 0x95c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN IOMUX_PAD(0x758, 0x350, 0, 0x9c0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DISP2_PIN1 IOMUX_PAD(0x758, 0x350, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__FEC_RDATA2 IOMUX_PAD(0x758, 0x350, 2, 0x960, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75c, 0x354, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 IOMUX_PAD(0x75c, 0x354, 2, 0x964, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__KEY_COL6 IOMUX_PAD(0x75c, 0x354, 4, 0x9c8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__UART3_RXD IOMUX_PAD(0x75c, 0x354, 5, 0x9f4, 8, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK IOMUX_PAD(0x75c, 0x354, 3, 0x9f8, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER IOMUX_PAD(0x760, 0x358, 2, 0x970, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__KEY_COL7 IOMUX_PAD(0x760, 0x358, 4, 0x9cc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__UART3_TXD IOMUX_PAD(0x760, 0x358, 5, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR IOMUX_PAD(0x760, 0x358, 3, 0xa1c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76c, 0x364, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__FEC_COL IOMUX_PAD(0x784, 0x37c, 2, 0x94c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7 IOMUX_PAD(0x784, 0x37c, 4, 0x9dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 IOMUX_PAD(0x784, 0x37c, 3, 0xa04, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV IOMUX_PAD(0x78c, 0x384, 2, 0x96c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 IOMUX_PAD(0x78c, 0x384, 3, 0xa0c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC IOMUX_PAD(0x790, 0x388, 4, 0x8fc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK IOMUX_PAD(0x790, 0x388, 2, 0x974, 1, MX51_PAD_CTRL_4)
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 IOMUX_PAD(0x790, 0x388, 3, 0xa10, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS IOMUX_PAD(0x794, 0x38c, 4, 0x900, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 IOMUX_PAD(0x794, 0x38c, 2, 0x958, 1, MX51_PAD_CTRL_4)
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 IOMUX_PAD(0x794, 0x38c, 3, 0xa14, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS IOMUX_PAD(0x798, 0x390, 4, 0x8f8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS IOMUX_PAD(0x798, 0x390, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 IOMUX_PAD(0x798, 0x390, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 IOMUX_PAD(0x798, 0x390, 3, 0xa18, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79c, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x79c, 0x394, 2, 0x91c, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7a0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x7a0, 0x398, 2, 0x914, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7a4, 0x39c, 1, 0x8d8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x7a4, 0x39c, 2, 0x918, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(__NA_, 0x01c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(__NA_, 0x020, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(__NA_, 0x024, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(__NA_, 0x028, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7a8, 0x3a0, 1, 0x8d4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(__NA_, 0x02c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(__NA_, 0x030, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(__NA_, 0x034, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(__NA_, 0x038, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7ac, 0x3a4, 1, 0x8e4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(__NA_, 0x044, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(__NA_, 0x048, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(__NA_, 0x03c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(__NA_, 0x040, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7b0, 0x3a8, 1, 0x8e8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x7bc, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__I2C1_SDA IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x9b4, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x7c4, 0x3bc, 2, 0x918, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD1_DAT4 IOMUX_PAD(0x7c4, 0x3bc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 0x12, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 0x12, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__CCM_CLKO2 IOMUX_PAD(0x7d8, 0x3d0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPT_CLKIN IOMUX_PAD(0x7d8, 0x3d0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPT_CAPIN1 IOMUX_PAD(0x804, 0x3d8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__CCM_CLKO IOMUX_PAD(0x808, 0x3dc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPT_CAPIN2 IOMUX_PAD(0x80c, 0x3e0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__CCM_CLKO2 IOMUX_PAD(0x814, 0x3e8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__CCM_CLKO IOMUX_PAD(0x818, 0x3ec, 4, __NA_, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 39406b7..a7e9bd2 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -50,6 +50,7 @@
#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 75b7b6a..e6d4b99 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -36,6 +36,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx27.h"
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 1ffa271..62a6e02 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -39,6 +39,7 @@
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx35.h"
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index e978dda..b2ee6e0 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -35,6 +35,7 @@
#include "common.h"
#include "devices-imx25.h"
+#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx25.h"
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index b61bd8e..ede2bdb 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -43,6 +43,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
deleted file mode 100644
index bb3ca04..0000000
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "iomux-mx27.h"
-
-static const int mx27ipcam_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
-};
-
-static void __init mx27ipcam_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
- "mx27ipcam");
-
- imx27_add_imx_uart0(NULL);
- imx27_add_fec(NULL);
- imx27_add_imx2_wdt();
-}
-
-static void __init mx27ipcam_timer_init(void)
-{
- mx27_clocks_init(25000000);
-}
-
-MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
- /* maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27ipcam_timer_init,
- .init_machine = mx27ipcam_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
deleted file mode 100644
index 9992089..0000000
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int mx27lite_pins[] __initconst = {
- /* UART1 */
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS,
- /* FEC */
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mx27lite_init(void)
-{
- imx27_soc_init();
-
- mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
- "imx27lite");
- imx27_add_imx_uart0(&uart_pdata);
- imx27_add_fec(NULL);
-}
-
-static void __init mx27lite_timer_init(void)
-{
- mx27_clocks_init(26000000);
-}
-
-MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
- .atag_offset = 0x100,
- .map_io = mx27_map_io,
- .init_early = imx27_init_early,
- .init_irq = mx27_init_irq,
- .init_time = mx27lite_timer_init,
- .init_machine = mx27lite_init,
- .restart = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index b899c0b..b1e56a9 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -23,14 +23,13 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *imx50_dt_board_compat[] __initconst = {
+static const char * const imx50_dt_board_compat[] __initconst = {
"fsl,imx50",
NULL
};
DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
- .map_io = mx53_map_io,
- .init_irq = mx53_init_irq,
+ .init_irq = tzic_init_irq,
.init_machine = imx50_dt_init,
.dt_compat = imx50_dt_board_compat,
.restart = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
new file mode 100644
index 0000000..c77deb3
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+#include "hardware.h"
+
+static void __init imx51_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX51);
+}
+
+/*
+ * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
+ * the Freescale marketing division. However this did not remove the
+ * hardware from the chip which still needs to be configured for proper
+ * IPU support.
+ */
+#define MX51_MIPI_HSC_BASE 0x83fdc000
+static void __init imx51_ipu_mipi_setup(void)
+{
+ void __iomem *hsc_addr;
+
+ hsc_addr = ioremap(MX51_MIPI_HSC_BASE, SZ_16K);
+ WARN_ON(!hsc_addr);
+
+ /* setup MIPI module to legacy mode */
+ __raw_writel(0xf00, hsc_addr);
+
+ /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
+ __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
+ hsc_addr + 0x800);
+
+ iounmap(hsc_addr);
+}
+
+static void __init imx51_dt_init(void)
+{
+ struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
+ mxc_arch_reset_init_dt();
+ imx51_ipu_mipi_setup();
+ imx_src_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ platform_device_register_full(&devinfo);
+}
+
+static void __init imx51_init_late(void)
+{
+ mx51_neon_fixup();
+ imx51_pm_init();
+}
+
+static const char * const imx51_dt_board_compat[] __initconst = {
+ "fsl,imx51",
+ NULL
+};
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+ .init_early = imx51_init_early,
+ .init_irq = tzic_init_irq,
+ .init_machine = imx51_dt_init,
+ .init_late = imx51_init_late,
+ .dt_compat = imx51_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 2bad387..03dd6ea 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -22,24 +22,35 @@
#include "common.h"
#include "hardware.h"
-#include "mx53.h"
+
+static void __init imx53_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX53);
+}
static void __init imx53_dt_init(void)
{
mxc_arch_reset_init_dt();
+ imx_src_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ imx_aips_allow_unprivileged_access("fsl,imx53-aipstz");
}
-static const char *imx53_dt_board_compat[] __initconst = {
+static void __init imx53_init_late(void)
+{
+ imx53_pm_init();
+}
+
+static const char * const imx53_dt_board_compat[] __initconst = {
"fsl,imx53",
NULL
};
DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
- .map_io = mx53_map_io,
.init_early = imx53_init_early,
- .init_irq = mx53_init_irq,
+ .init_irq = tzic_init_irq,
.init_machine = imx53_dt_init,
.init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index e60456d..d51c6e9 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -320,7 +320,7 @@
val >>= OCOTP_CFG3_SPEED_SHIFT;
val &= 0x3;
- if (val != OCOTP_CFG3_SPEED_1P2GHZ)
+ if ((val != OCOTP_CFG3_SPEED_1P2GHZ) && cpu_is_imx6q())
if (dev_pm_opp_disable(cpu_dev, 1200000000))
pr_warn("failed to disable 1.2 GHz OPP\n");
if (val < OCOTP_CFG3_SPEED_996MHZ)
@@ -396,7 +396,7 @@
irqchip_init();
}
-static const char *imx6q_dt_compat[] __initconst = {
+static const char * const imx6q_dt_compat[] __initconst = {
"fsl,imx6dl",
"fsl,imx6q",
NULL,
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index ad32338..ed263a2 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -70,7 +70,7 @@
irqchip_init();
}
-static const char *imx6sl_dt_compat[] __initconst = {
+static const char * const imx6sl_dt_compat[] __initconst = {
"fsl,imx6sl",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 02fccf6..673a734 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -12,6 +12,7 @@
#include <asm/mach/map.h>
#include "common.h"
+#include "cpuidle.h"
static void __init imx6sx_init_machine(void)
{
@@ -26,6 +27,7 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx_anatop_init();
+ imx6sx_pm_init();
}
static void __init imx6sx_init_irq(void)
@@ -37,7 +39,12 @@
irqchip_init();
}
-static const char *imx6sx_dt_compat[] __initconst = {
+static void __init imx6sx_init_late(void)
+{
+ imx6q_cpuidle_init();
+}
+
+static const char * const imx6sx_dt_compat[] __initconst = {
"fsl,imx6sx",
NULL,
};
@@ -47,5 +54,6 @@
.init_irq = imx6sx_init_irq,
.init_machine = imx6sx_init_machine,
.dt_compat = imx6sx_dt_compat,
+ .init_late = imx6sx_init_late,
.restart = mxc_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index ea1fa19..0d01e36 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -39,6 +39,7 @@
#include "common.h"
#include "devices-imx25.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 435a542..9ef4640 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -40,6 +40,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 4217871..453f41a 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -40,6 +40,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index eee042f..e9549a3 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -45,6 +45,7 @@
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index fa15d0b..57eac6f 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -42,6 +42,7 @@
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 08730f2..bb6f8a5 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -47,6 +47,7 @@
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -434,10 +435,8 @@
return -ENODEV;
pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
static const struct gpio_led mx31moboard_leds[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 4e8b184..72cd77d 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -50,6 +50,7 @@
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 1221237..2d1c50b 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,6 +36,7 @@
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 81b8aff..8eb1570 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -45,6 +45,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "pcm037.h"
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 6c56fb5..ee862ad 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -36,6 +36,7 @@
#include "board-pcm038.h"
#include "common.h"
#include "devices-imx27.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index c62b5d2..b623bca 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -35,6 +35,7 @@
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
#include "ulpi.h"
diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c
index c446027..ee7e57b 100644
--- a/arch/arm/mach-imx/mach-vf610.c
+++ b/arch/arm/mach-imx/mach-vf610.c
@@ -20,7 +20,7 @@
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *vf610_dt_compat[] __initconst = {
+static const char * const vf610_dt_compat[] __initconst = {
"fsl,vf610",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 872b3c6..97836e9 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -34,6 +34,7 @@
#include "common.h"
#include "devices-imx35.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx35.h"
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
deleted file mode 100644
index 4c11202..0000000
--- a/arch/arm/mach-imx/mm-imx5.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/of_address.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v3.h"
-
-/*
- * Define the MX51 memory map.
- */
-static struct map_desc mx51_io_desc[] __initdata = {
- imx_map_entry(MX51, TZIC, MT_DEVICE),
- imx_map_entry(MX51, IRAM, MT_DEVICE),
- imx_map_entry(MX51, AIPS1, MT_DEVICE),
- imx_map_entry(MX51, SPBA0, MT_DEVICE),
- imx_map_entry(MX51, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX53 memory map.
- */
-static struct map_desc mx53_io_desc[] __initdata = {
- imx_map_entry(MX53, TZIC, MT_DEVICE),
- imx_map_entry(MX53, AIPS1, MT_DEVICE),
- imx_map_entry(MX53, SPBA0, MT_DEVICE),
- imx_map_entry(MX53, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx51_map_io(void)
-{
- iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
-}
-
-void __init mx53_map_io(void)
-{
- iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
-}
-
-/*
- * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
- * the Freescale marketing division. However this did not remove the
- * hardware from the chip which still needs to be configured for proper
- * IPU support.
- */
-static void __init imx51_ipu_mipi_setup(void)
-{
- void __iomem *hsc_addr;
- hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR);
-
- /* setup MIPI module to legacy mode */
- __raw_writel(0xf00, hsc_addr);
-
- /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
- __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
- hsc_addr + 0x800);
-}
-
-void __init imx51_init_early(void)
-{
- imx51_ipu_mipi_setup();
- mxc_set_cpu_type(MXC_CPU_MX51);
- mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
- imx_src_init();
-}
-
-void __init imx53_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX53);
- imx_src_init();
-}
-
-void __init mx51_init_irq(void)
-{
- tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
-}
-
-void __init mx53_init_irq(void)
-{
- struct device_node *np;
- void __iomem *base;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
- base = of_iomap(np, 0);
- WARN_ON(!base);
-
- tzic_init_irq(base);
-}
-
-static struct sdma_platform_data imx51_sdma_pdata __initdata = {
- .fw_name = "sdma-imx51.bin",
-};
-
-static const struct resource imx51_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx51_soc_init(void)
-{
- mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- mxc_device_init();
-
- /* i.mx51 has the i.mx35 type gpio */
- mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
- mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
- mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
- mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
-
- pinctrl_provide_dummies();
-
- /* i.mx51 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
-
- /* Setup AIPS registers */
- imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR));
- imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR));
-
- /* i.mx51 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res,
- ARRAY_SIZE(imx51_audmux_res));
-}
-
-void __init imx51_init_late(void)
-{
- mx51_neon_fixup();
- imx5_pm_init();
-}
-
-void __init imx53_init_late(void)
-{
- imx5_pm_init();
-}
diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
deleted file mode 100644
index fb38436..0000000
--- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Exported ksyms of ARCH_MX1
- *
- * Copyright (C) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-
-#include <linux/platform_data/camera-mx1.h>
-
-/* IMX camera FIQ handler */
-EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
-EXPORT_SYMBOL(mx1_camera_sof_fiq_end);
diff --git a/arch/arm/mach-imx/mx1-camera-fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
deleted file mode 100644
index 9c69aa6..0000000
--- a/arch/arm/mach-imx/mx1-camera-fiq.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on linux/arch/arm/lib/floppydma.S
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
- .text
- .global mx1_camera_sof_fiq_end
- .global mx1_camera_sof_fiq_start
-mx1_camera_sof_fiq_start:
- @ enable dma
- ldr r12, [r9]
- orr r12, r12, #0x00000001
- str r12, [r9]
- @ unmask DMA interrupt
- ldr r12, [r8]
- bic r12, r12, r13
- str r12, [r8]
- @ disable SOF interrupt
- ldr r12, [r10]
- bic r12, r12, #0x00010000
- str r12, [r10]
- @ clear SOF flag
- mov r12, #0x00010000
- str r12, [r11]
- @ return from FIQ
- subs pc, lr, #4
-mx1_camera_sof_fiq_end:
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
index 52d5b15..1e91a09 100644
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -24,6 +24,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -213,10 +214,8 @@
usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
index a4f43e9..2e895a8 100644
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -28,6 +28,7 @@
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -327,10 +328,8 @@
usbh1_pdata.otg = phy;
pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
static const struct fsl_usb2_platform_data usb_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
index 04ae45d..89fc35a 100644
--- a/arch/arm/mach-imx/mx31moboard-smartbot.c
+++ b/arch/arm/mach-imx/mx31moboard-smartbot.c
@@ -28,6 +28,7 @@
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
+#include "ehci.h"
#include "hardware.h"
#include "iomux-mx3.h"
#include "ulpi.h"
@@ -141,10 +142,8 @@
return -ENODEV;
pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
- return 0;
+ return PTR_ERR_OR_ZERO(pdev);
}
#else
static inline int smartbot_otg_host_init(void) { return 0; }
diff --git a/arch/arm/mach-imx/mx51.h b/arch/arm/mach-imx/mx51.h
deleted file mode 100644
index af844f7..0000000
--- a/arch/arm/mach-imx/mx51.h
+++ /dev/null
@@ -1,346 +0,0 @@
-#ifndef __MACH_MX51_H__
-#define __MACH_MX51_H__
-
-/*
- * IROM
- */
-#define MX51_IROM_BASE_ADDR 0x0
-#define MX51_IROM_SIZE SZ_64K
-
-/*
- * IRAM
- */
-#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */
-#define MX51_IRAM_PARTITIONS 16
-#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
-
-#define MX51_GPU_BASE_ADDR 0x20000000
-#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
-#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
-
-/*
- * SPBA global module enabled #0
- */
-#define MX51_SPBA0_BASE_ADDR 0x70000000
-#define MX51_SPBA0_SIZE SZ_1M
-
-#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000)
-#define MX51_ESDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000)
-#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000)
-#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000)
-#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000)
-#define MX51_ESDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000)
-#define MX51_ESDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000)
-#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000)
-#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000)
-#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000)
-#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000)
-#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000)
-
-/*
- * AIPS 1
- */
-#define MX51_AIPS1_BASE_ADDR 0x73f00000
-#define MX51_AIPS1_SIZE SZ_1M
-
-#define MX51_USB_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
-#define MX51_USB_OTG_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0000)
-#define MX51_USB_HS1_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0200)
-#define MX51_USB_HS2_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0400)
-#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000)
-#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000)
-#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000)
-#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000)
-#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000)
-#define MX51_WDOG1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000)
-#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000)
-#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000)
-#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000)
-#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000)
-#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000)
-#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000)
-#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000)
-#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000)
-#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000)
-#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000)
-#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000)
-#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000)
-#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000)
-
-/*
- * AIPS 2
- */
-#define MX51_AIPS2_BASE_ADDR 0x83f00000
-#define MX51_AIPS2_SIZE SZ_1M
-
-#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000)
-#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000)
-#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000)
-#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000)
-#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000)
-#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000)
-#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000)
-#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000)
-#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000)
-#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000)
-#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000)
-#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000)
-#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000)
-#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000)
-#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000)
-#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000)
-#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000)
-#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000)
-#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000)
-#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000)
-#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000)
-#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000)
-#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000)
-#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00)
-#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000)
-#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000)
-#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000)
-#define MX51_SSI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000)
-#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000)
-#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000)
-#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000)
-#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000)
-
-#define MX51_CSD0_BASE_ADDR 0x90000000
-#define MX51_CSD1_BASE_ADDR 0xa0000000
-#define MX51_CS0_BASE_ADDR 0xb0000000
-#define MX51_CS1_BASE_ADDR 0xb8000000
-#define MX51_CS2_BASE_ADDR 0xc0000000
-#define MX51_CS3_BASE_ADDR 0xc8000000
-#define MX51_CS4_BASE_ADDR 0xcc000000
-#define MX51_CS5_BASE_ADDR 0xce000000
-
-/*
- * NFC
- */
-#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */
-#define MX51_NFC_AXI_SIZE SZ_64K
-
-#define MX51_GPU2D_BASE_ADDR 0xd0000000
-#define MX51_TZIC_BASE_ADDR 0xe0000000
-#define MX51_TZIC_SIZE SZ_16K
-
-#define MX51_IO_P2V(x) IMX_IO_P2V(x)
-#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX51_SPBA_SDHC1 0x04
-#define MX51_SPBA_SDHC2 0x08
-#define MX51_SPBA_UART3 0x0c
-#define MX51_SPBA_CSPI1 0x10
-#define MX51_SPBA_SSI2 0x14
-#define MX51_SPBA_SDHC3 0x20
-#define MX51_SPBA_SDHC4 0x24
-#define MX51_SPBA_SPDIF 0x28
-#define MX51_SPBA_ATA 0x30
-#define MX51_SPBA_SLIM 0x34
-#define MX51_SPBA_HSI2C 0x38
-#define MX51_SPBA_CTRL 0x3c
-
-/*
- * Defines for modules using static and dynamic DMA channels
- */
-#define MX51_MXC_DMA_CHANNEL_IRAM 30
-#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
-#ifdef CONFIG_SDMA_IRAM
-#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1)
-#else /*CONFIG_SDMA_IRAM */
-#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
-#endif /*CONFIG_SDMA_IRAM */
-#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL
-
-#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
-
-/*
- * DMA request assignments
- */
-#define MX51_DMA_REQ_VPU 0
-#define MX51_DMA_REQ_GPC 1
-#define MX51_DMA_REQ_ATA_RX 2
-#define MX51_DMA_REQ_ATA_TX 3
-#define MX51_DMA_REQ_ATA_TX_END 4
-#define MX51_DMA_REQ_SLIM_B 5
-#define MX51_DMA_REQ_CSPI1_RX 6
-#define MX51_DMA_REQ_CSPI1_TX 7
-#define MX51_DMA_REQ_CSPI2_RX 8
-#define MX51_DMA_REQ_CSPI2_TX 9
-#define MX51_DMA_REQ_HS_I2C_TX 10
-#define MX51_DMA_REQ_HS_I2C_RX 11
-#define MX51_DMA_REQ_FIRI_RX 12
-#define MX51_DMA_REQ_FIRI_TX 13
-#define MX51_DMA_REQ_EXTREQ1 14
-#define MX51_DMA_REQ_GPU 15
-#define MX51_DMA_REQ_UART2_RX 16
-#define MX51_DMA_REQ_UART2_TX 17
-#define MX51_DMA_REQ_UART1_RX 18
-#define MX51_DMA_REQ_UART1_TX 19
-#define MX51_DMA_REQ_SDHC1 20
-#define MX51_DMA_REQ_SDHC2 21
-#define MX51_DMA_REQ_SSI2_RX1 22
-#define MX51_DMA_REQ_SSI2_TX1 23
-#define MX51_DMA_REQ_SSI2_RX0 24
-#define MX51_DMA_REQ_SSI2_TX0 25
-#define MX51_DMA_REQ_SSI1_RX1 26
-#define MX51_DMA_REQ_SSI1_TX1 27
-#define MX51_DMA_REQ_SSI1_RX0 28
-#define MX51_DMA_REQ_SSI1_TX0 29
-#define MX51_DMA_REQ_EMI_RD 30
-#define MX51_DMA_REQ_CTI2_0 31
-#define MX51_DMA_REQ_EMI_WR 32
-#define MX51_DMA_REQ_CTI2_1 33
-#define MX51_DMA_REQ_EPIT2 34
-#define MX51_DMA_REQ_SSI3_RX1 35
-#define MX51_DMA_REQ_IPU 36
-#define MX51_DMA_REQ_SSI3_TX1 37
-#define MX51_DMA_REQ_CSPI_RX 38
-#define MX51_DMA_REQ_CSPI_TX 39
-#define MX51_DMA_REQ_SDHC3 40
-#define MX51_DMA_REQ_SDHC4 41
-#define MX51_DMA_REQ_SLIM_B_TX 42
-#define MX51_DMA_REQ_UART3_RX 43
-#define MX51_DMA_REQ_UART3_TX 44
-#define MX51_DMA_REQ_SPDIF 45
-#define MX51_DMA_REQ_SSI3_RX0 46
-#define MX51_DMA_REQ_SSI3_TX0 47
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX51_INT_BASE (NR_IRQS_LEGACY + 0)
-#define MX51_INT_RESV0 (NR_IRQS_LEGACY + 0)
-#define MX51_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
-#define MX51_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
-#define MX51_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
-#define MX51_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
-#define MX51_INT_RESV5 (NR_IRQS_LEGACY + 5)
-#define MX51_INT_SDMA (NR_IRQS_LEGACY + 6)
-#define MX51_INT_IOMUX (NR_IRQS_LEGACY + 7)
-#define MX51_INT_NFC (NR_IRQS_LEGACY + 8)
-#define MX51_INT_VPU (NR_IRQS_LEGACY + 9)
-#define MX51_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
-#define MX51_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
-#define MX51_INT_GPU (NR_IRQS_LEGACY + 12)
-#define MX51_INT_RESV13 (NR_IRQS_LEGACY + 13)
-#define MX51_INT_USB_HS1 (NR_IRQS_LEGACY + 14)
-#define MX51_INT_EMI (NR_IRQS_LEGACY + 15)
-#define MX51_INT_USB_HS2 (NR_IRQS_LEGACY + 16)
-#define MX51_INT_USB_HS3 (NR_IRQS_LEGACY + 17)
-#define MX51_INT_USB_OTG (NR_IRQS_LEGACY + 18)
-#define MX51_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
-#define MX51_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
-#define MX51_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
-#define MX51_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
-#define MX51_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
-#define MX51_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
-#define MX51_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
-#define MX51_INT_RTIC (NR_IRQS_LEGACY + 26)
-#define MX51_INT_CSU (NR_IRQS_LEGACY + 27)
-#define MX51_INT_SLIM_B (NR_IRQS_LEGACY + 28)
-#define MX51_INT_SSI1 (NR_IRQS_LEGACY + 29)
-#define MX51_INT_SSI2 (NR_IRQS_LEGACY + 30)
-#define MX51_INT_UART1 (NR_IRQS_LEGACY + 31)
-#define MX51_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX51_INT_UART3 (NR_IRQS_LEGACY + 33)
-#define MX51_INT_RESV34 (NR_IRQS_LEGACY + 34)
-#define MX51_INT_RESV35 (NR_IRQS_LEGACY + 35)
-#define MX51_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
-#define MX51_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
-#define MX51_INT_CSPI (NR_IRQS_LEGACY + 38)
-#define MX51_INT_GPT (NR_IRQS_LEGACY + 39)
-#define MX51_INT_EPIT1 (NR_IRQS_LEGACY + 40)
-#define MX51_INT_EPIT2 (NR_IRQS_LEGACY + 41)
-#define MX51_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
-#define MX51_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
-#define MX51_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
-#define MX51_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
-#define MX51_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
-#define MX51_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
-#define MX51_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
-#define MX51_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
-#define MX51_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
-#define MX51_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
-#define MX51_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
-#define MX51_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
-#define MX51_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
-#define MX51_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
-#define MX51_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
-#define MX51_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
-#define MX51_INT_WDOG1 (NR_IRQS_LEGACY + 58)
-#define MX51_INT_WDOG2 (NR_IRQS_LEGACY + 59)
-#define MX51_INT_KPP (NR_IRQS_LEGACY + 60)
-#define MX51_INT_PWM1 (NR_IRQS_LEGACY + 61)
-#define MX51_INT_I2C1 (NR_IRQS_LEGACY + 62)
-#define MX51_INT_I2C2 (NR_IRQS_LEGACY + 63)
-#define MX51_INT_HS_I2C (NR_IRQS_LEGACY + 64)
-#define MX51_INT_RESV65 (NR_IRQS_LEGACY + 65)
-#define MX51_INT_RESV66 (NR_IRQS_LEGACY + 66)
-#define MX51_INT_SIM_IPB (NR_IRQS_LEGACY + 67)
-#define MX51_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
-#define MX51_INT_IIM (NR_IRQS_LEGACY + 69)
-#define MX51_INT_ATA (NR_IRQS_LEGACY + 70)
-#define MX51_INT_CCM1 (NR_IRQS_LEGACY + 71)
-#define MX51_INT_CCM2 (NR_IRQS_LEGACY + 72)
-#define MX51_INT_GPC1 (NR_IRQS_LEGACY + 73)
-#define MX51_INT_GPC2 (NR_IRQS_LEGACY + 74)
-#define MX51_INT_SRC (NR_IRQS_LEGACY + 75)
-#define MX51_INT_NM (NR_IRQS_LEGACY + 76)
-#define MX51_INT_PMU (NR_IRQS_LEGACY + 77)
-#define MX51_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
-#define MX51_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
-#define MX51_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
-#define MX51_INT_MCG_ERR (NR_IRQS_LEGACY + 81)
-#define MX51_INT_MCG_TMR (NR_IRQS_LEGACY + 82)
-#define MX51_INT_MCG_FUNC (NR_IRQS_LEGACY + 83)
-#define MX51_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
-#define MX51_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
-#define MX51_INT_RESV86 (NR_IRQS_LEGACY + 86)
-#define MX51_INT_FEC (NR_IRQS_LEGACY + 87)
-#define MX51_INT_OWIRE (NR_IRQS_LEGACY + 88)
-#define MX51_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
-#define MX51_INT_SJC (NR_IRQS_LEGACY + 90)
-#define MX51_INT_SPDIF (NR_IRQS_LEGACY + 91)
-#define MX51_INT_TVE (NR_IRQS_LEGACY + 92)
-#define MX51_INT_FIRI (NR_IRQS_LEGACY + 93)
-#define MX51_INT_PWM2 (NR_IRQS_LEGACY + 94)
-#define MX51_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
-#define MX51_INT_SSI3 (NR_IRQS_LEGACY + 96)
-#define MX51_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
-#define MX51_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
-#define MX51_INT_SMC_RX (NR_IRQS_LEGACY + 99)
-#define MX51_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
-#define MX51_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
-#define MX51_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx51_revision(void);
-extern void mx51_display_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/mach-imx/mx53.h b/arch/arm/mach-imx/mx53.h
deleted file mode 100644
index f829d1c..0000000
--- a/arch/arm/mach-imx/mx53.h
+++ /dev/null
@@ -1,342 +0,0 @@
-#ifndef __MACH_MX53_H__
-#define __MACH_MX53_H__
-
-/*
- * IROM
- */
-#define MX53_IROM_BASE_ADDR 0x0
-#define MX53_IROM_SIZE SZ_64K
-
-/* TZIC */
-#define MX53_TZIC_BASE_ADDR 0x0FFFC000
-#define MX53_TZIC_SIZE SZ_16K
-
-/*
- * AHCI SATA
- */
-#define MX53_SATA_BASE_ADDR 0x10000000
-
-/*
- * NFC
- */
-#define MX53_NFC_AXI_BASE_ADDR 0xF7FF0000 /* NAND flash AXI */
-#define MX53_NFC_AXI_SIZE SZ_64K
-
-/*
- * IRAM
- */
-#define MX53_IRAM_BASE_ADDR 0xF8000000 /* internal ram */
-#define MX53_IRAM_PARTITIONS 16
-#define MX53_IRAM_SIZE (MX53_IRAM_PARTITIONS * SZ_8K) /* 128KB */
-
-/*
- * Graphics Memory of GPU
- */
-#define MX53_IPU_CTRL_BASE_ADDR 0x18000000
-#define MX53_GPU2D_BASE_ADDR 0x20000000
-#define MX53_GPU_BASE_ADDR 0x30000000
-#define MX53_GPU_GMEM_BASE_ADDR 0xF8020000
-
-#define MX53_DEBUG_BASE_ADDR 0x40000000
-#define MX53_DEBUG_SIZE SZ_1M
-#define MX53_ETB_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00001000)
-#define MX53_ETM_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00002000)
-#define MX53_TPIU_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00003000)
-#define MX53_CTI0_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00004000)
-#define MX53_CTI1_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00005000)
-#define MX53_CTI2_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00006000)
-#define MX53_CTI3_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00007000)
-#define MX53_CORTEX_DBG_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00008000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX53_SPBA0_BASE_ADDR 0x50000000
-#define MX53_SPBA0_SIZE SZ_1M
-
-#define MX53_ESDHC1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00004000)
-#define MX53_ESDHC2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00008000)
-#define MX53_UART3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0000C000)
-#define MX53_ECSPI1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00010000)
-#define MX53_SSI2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00014000)
-#define MX53_ESDHC3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00020000)
-#define MX53_ESDHC4_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00024000)
-#define MX53_SPDIF_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00028000)
-#define MX53_ASRC_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0002C000)
-#define MX53_ATA_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00030000)
-#define MX53_SLIM_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00034000)
-#define MX53_HSI2C_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00038000)
-#define MX53_SPBA_CTRL_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0003C000)
-
-/*
- * AIPS 1
- */
-#define MX53_AIPS1_BASE_ADDR 0x53F00000
-#define MX53_AIPS1_SIZE SZ_1M
-
-#define MX53_OTG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00080000)
-#define MX53_GPIO1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00084000)
-#define MX53_GPIO2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00088000)
-#define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000)
-#define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000)
-#define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000)
-#define MX53_WDOG1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000)
-#define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000)
-#define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000)
-#define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000)
-#define MX53_IOMUXC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A8000)
-#define MX53_EPIT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000AC000)
-#define MX53_EPIT2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B0000)
-#define MX53_PWM1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B4000)
-#define MX53_PWM2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B8000)
-#define MX53_UART1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000BC000)
-#define MX53_UART2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000C0000)
-#define MX53_SRC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D0000)
-#define MX53_CCM_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D4000)
-#define MX53_GPC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D8000)
-#define MX53_GPIO5_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000DC000)
-#define MX53_GPIO6_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E0000)
-#define MX53_GPIO7_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E4000)
-#define MX53_ATA_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E8000)
-#define MX53_I2C3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000EC000)
-#define MX53_UART4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000F0000)
-
-/*
- * AIPS 2
- */
-#define MX53_AIPS2_BASE_ADDR 0x63F00000
-#define MX53_AIPS2_SIZE SZ_1M
-
-#define MX53_PLL1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00080000)
-#define MX53_PLL2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00084000)
-#define MX53_PLL3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00088000)
-#define MX53_PLL4_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0008C000)
-#define MX53_UART5_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00090000)
-#define MX53_AHBMAX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00094000)
-#define MX53_IIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00098000)
-#define MX53_CSU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0009C000)
-#define MX53_ARM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A0000)
-#define MX53_OWIRE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A4000)
-#define MX53_FIRI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A8000)
-#define MX53_ECSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000)
-#define MX53_SDMA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B0000)
-#define MX53_SCC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B4000)
-#define MX53_ROMCP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B8000)
-#define MX53_RTIC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000BC000)
-#define MX53_CSPI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000)
-#define MX53_I2C2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C4000)
-#define MX53_I2C1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C8000)
-#define MX53_SSI1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000CC000)
-#define MX53_AUDMUX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D0000)
-#define MX53_RTC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D4000)
-#define MX53_M4IF_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D8000)
-#define MX53_ESDCTL_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D9000)
-#define MX53_WEIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DA000)
-#define MX53_NFC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DB000)
-#define MX53_EMI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DBF00)
-#define MX53_MIPI_HSC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DC000)
-#define MX53_MLB_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E4000)
-#define MX53_SSI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E8000)
-#define MX53_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000)
-#define MX53_TVE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F0000)
-#define MX53_VPU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F4000)
-#define MX53_SAHARA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F8000)
-#define MX53_PTP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000FC000)
-
-/*
- * Memory regions and CS
- */
-#define MX53_CSD0_BASE_ADDR 0x70000000
-#define MX53_CSD1_BASE_ADDR 0xB0000000
-#define MX53_CS0_BASE_ADDR 0xF0000000
-#define MX53_CS1_32MB_BASE_ADDR 0xF2000000
-#define MX53_CS1_64MB_BASE_ADDR 0xF4000000
-#define MX53_CS2_64MB_BASE_ADDR 0xF4000000
-#define MX53_CS2_96MB_BASE_ADDR 0xF6000000
-#define MX53_CS3_BASE_ADDR 0xF6000000
-
-#define MX53_IO_P2V(x) IMX_IO_P2V(x)
-#define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX53_SPBA_SDHC1 0x04
-#define MX53_SPBA_SDHC2 0x08
-#define MX53_SPBA_UART3 0x0C
-#define MX53_SPBA_CSPI1 0x10
-#define MX53_SPBA_SSI2 0x14
-#define MX53_SPBA_SDHC3 0x20
-#define MX53_SPBA_SDHC4 0x24
-#define MX53_SPBA_SPDIF 0x28
-#define MX53_SPBA_ATA 0x30
-#define MX53_SPBA_SLIM 0x34
-#define MX53_SPBA_HSI2C 0x38
-#define MX53_SPBA_CTRL 0x3C
-
-/*
- * DMA request assignments
- */
-#define MX53_DMA_REQ_SSI3_TX0 47
-#define MX53_DMA_REQ_SSI3_RX0 46
-#define MX53_DMA_REQ_SSI3_TX1 45
-#define MX53_DMA_REQ_SSI3_RX1 44
-#define MX53_DMA_REQ_UART3_TX 43
-#define MX53_DMA_REQ_UART3_RX 42
-#define MX53_DMA_REQ_ESAI_TX 41
-#define MX53_DMA_REQ_ESAI_RX 40
-#define MX53_DMA_REQ_CSPI_TX 39
-#define MX53_DMA_REQ_CSPI_RX 38
-#define MX53_DMA_REQ_ASRC_DMA6 37
-#define MX53_DMA_REQ_ASRC_DMA5 36
-#define MX53_DMA_REQ_ASRC_DMA4 35
-#define MX53_DMA_REQ_ASRC_DMA3 34
-#define MX53_DMA_REQ_ASRC_DMA2 33
-#define MX53_DMA_REQ_ASRC_DMA1 32
-#define MX53_DMA_REQ_EMI_WR 31
-#define MX53_DMA_REQ_EMI_RD 30
-#define MX53_DMA_REQ_SSI1_TX0 29
-#define MX53_DMA_REQ_SSI1_RX0 28
-#define MX53_DMA_REQ_SSI1_TX1 27
-#define MX53_DMA_REQ_SSI1_RX1 26
-#define MX53_DMA_REQ_SSI2_TX0 25
-#define MX53_DMA_REQ_SSI2_RX0 24
-#define MX53_DMA_REQ_SSI2_TX1 23
-#define MX53_DMA_REQ_SSI2_RX1 22
-#define MX53_DMA_REQ_I2C2_SDHC2 21
-#define MX53_DMA_REQ_I2C1_SDHC1 20
-#define MX53_DMA_REQ_UART1_TX 19
-#define MX53_DMA_REQ_UART1_RX 18
-#define MX53_DMA_REQ_UART5_TX 17
-#define MX53_DMA_REQ_UART5_RX 16
-#define MX53_DMA_REQ_SPDIF_TX 15
-#define MX53_DMA_REQ_SPDIF_RX 14
-#define MX53_DMA_REQ_UART2_FIRI_TX 13
-#define MX53_DMA_REQ_UART2_FIRI_RX 12
-#define MX53_DMA_REQ_SDHC4 11
-#define MX53_DMA_REQ_I2C3_SDHC3 10
-#define MX53_DMA_REQ_CSPI2_TX 9
-#define MX53_DMA_REQ_CSPI2_RX 8
-#define MX53_DMA_REQ_CSPI1_TX 7
-#define MX53_DMA_REQ_CSPI1_RX 6
-#define MX53_DMA_REQ_IPU 5
-#define MX53_DMA_REQ_ATA_TX_END 4
-#define MX53_DMA_REQ_ATA_UART4_TX 3
-#define MX53_DMA_REQ_ATA_UART4_RX 2
-#define MX53_DMA_REQ_GPC 1
-#define MX53_DMA_REQ_VPU 0
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX53_INT_RESV0 (NR_IRQS_LEGACY + 0)
-#define MX53_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
-#define MX53_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
-#define MX53_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
-#define MX53_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
-#define MX53_INT_DAP (NR_IRQS_LEGACY + 5)
-#define MX53_INT_SDMA (NR_IRQS_LEGACY + 6)
-#define MX53_INT_IOMUX (NR_IRQS_LEGACY + 7)
-#define MX53_INT_NFC (NR_IRQS_LEGACY + 8)
-#define MX53_INT_VPU (NR_IRQS_LEGACY + 9)
-#define MX53_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
-#define MX53_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
-#define MX53_INT_GPU (NR_IRQS_LEGACY + 12)
-#define MX53_INT_UART4 (NR_IRQS_LEGACY + 13)
-#define MX53_INT_USB_H1 (NR_IRQS_LEGACY + 14)
-#define MX53_INT_EMI (NR_IRQS_LEGACY + 15)
-#define MX53_INT_USB_H2 (NR_IRQS_LEGACY + 16)
-#define MX53_INT_USB_H3 (NR_IRQS_LEGACY + 17)
-#define MX53_INT_USB_OTG (NR_IRQS_LEGACY + 18)
-#define MX53_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
-#define MX53_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
-#define MX53_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
-#define MX53_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
-#define MX53_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
-#define MX53_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
-#define MX53_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
-#define MX53_INT_RTIC (NR_IRQS_LEGACY + 26)
-#define MX53_INT_CSU (NR_IRQS_LEGACY + 27)
-#define MX53_INT_SATA (NR_IRQS_LEGACY + 28)
-#define MX53_INT_SSI1 (NR_IRQS_LEGACY + 29)
-#define MX53_INT_SSI2 (NR_IRQS_LEGACY + 30)
-#define MX53_INT_UART1 (NR_IRQS_LEGACY + 31)
-#define MX53_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX53_INT_UART3 (NR_IRQS_LEGACY + 33)
-#define MX53_INT_RTC (NR_IRQS_LEGACY + 34)
-#define MX53_INT_PTP (NR_IRQS_LEGACY + 35)
-#define MX53_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
-#define MX53_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
-#define MX53_INT_CSPI (NR_IRQS_LEGACY + 38)
-#define MX53_INT_GPT (NR_IRQS_LEGACY + 39)
-#define MX53_INT_EPIT1 (NR_IRQS_LEGACY + 40)
-#define MX53_INT_EPIT2 (NR_IRQS_LEGACY + 41)
-#define MX53_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
-#define MX53_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
-#define MX53_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
-#define MX53_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
-#define MX53_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
-#define MX53_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
-#define MX53_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
-#define MX53_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
-#define MX53_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
-#define MX53_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
-#define MX53_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
-#define MX53_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
-#define MX53_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
-#define MX53_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
-#define MX53_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
-#define MX53_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
-#define MX53_INT_WDOG1 (NR_IRQS_LEGACY + 58)
-#define MX53_INT_WDOG2 (NR_IRQS_LEGACY + 59)
-#define MX53_INT_KPP (NR_IRQS_LEGACY + 60)
-#define MX53_INT_PWM1 (NR_IRQS_LEGACY + 61)
-#define MX53_INT_I2C1 (NR_IRQS_LEGACY + 62)
-#define MX53_INT_I2C2 (NR_IRQS_LEGACY + 63)
-#define MX53_INT_I2C3 (NR_IRQS_LEGACY + 64)
-#define MX53_INT_MLB (NR_IRQS_LEGACY + 65)
-#define MX53_INT_ASRC (NR_IRQS_LEGACY + 66)
-#define MX53_INT_SPDIF (NR_IRQS_LEGACY + 67)
-#define MX53_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
-#define MX53_INT_IIM (NR_IRQS_LEGACY + 69)
-#define MX53_INT_ATA (NR_IRQS_LEGACY + 70)
-#define MX53_INT_CCM1 (NR_IRQS_LEGACY + 71)
-#define MX53_INT_CCM2 (NR_IRQS_LEGACY + 72)
-#define MX53_INT_GPC1 (NR_IRQS_LEGACY + 73)
-#define MX53_INT_GPC2 (NR_IRQS_LEGACY + 74)
-#define MX53_INT_SRC (NR_IRQS_LEGACY + 75)
-#define MX53_INT_NM (NR_IRQS_LEGACY + 76)
-#define MX53_INT_PMU (NR_IRQS_LEGACY + 77)
-#define MX53_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
-#define MX53_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
-#define MX53_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
-#define MX53_INT_ESAI (NR_IRQS_LEGACY + 81)
-#define MX53_INT_CAN1 (NR_IRQS_LEGACY + 82)
-#define MX53_INT_CAN2 (NR_IRQS_LEGACY + 83)
-#define MX53_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
-#define MX53_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
-#define MX53_INT_UART5 (NR_IRQS_LEGACY + 86)
-#define MX53_INT_FEC (NR_IRQS_LEGACY + 87)
-#define MX53_INT_OWIRE (NR_IRQS_LEGACY + 88)
-#define MX53_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
-#define MX53_INT_SJC (NR_IRQS_LEGACY + 90)
-#define MX53_INT_TVE (NR_IRQS_LEGACY + 92)
-#define MX53_INT_FIRI (NR_IRQS_LEGACY + 93)
-#define MX53_INT_PWM2 (NR_IRQS_LEGACY + 94)
-#define MX53_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
-#define MX53_INT_SSI3 (NR_IRQS_LEGACY + 96)
-#define MX53_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
-#define MX53_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
-#define MX53_INT_SMC_RX (NR_IRQS_LEGACY + 99)
-#define MX53_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
-#define MX53_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
-#define MX53_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
-#define MX53_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
-#define MX53_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
-#define MX53_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
-#define MX53_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
-#define MX53_INT_GPIO7_LOW (NR_IRQS_LEGACY + 107)
-#define MX53_INT_GPIO7_HIGH (NR_IRQS_LEGACY + 108)
-
-#endif /* ifndef __MACH_MX53_H__ */
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 75d6a37..a39b69e 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -154,10 +154,17 @@
#endif
#ifndef __ASSEMBLY__
+#ifdef CONFIG_SOC_IMX6SL
static inline bool cpu_is_imx6sl(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6SL;
}
+#else
+static inline bool cpu_is_imx6sl(void)
+{
+ return false;
+}
+#endif
static inline bool cpu_is_imx6dl(void)
{
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 58aeaf5..f1f80ab 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -19,9 +19,26 @@
#include "common.h"
#include "cpuidle.h"
-#include "crm-regs-imx5.h"
#include "hardware.h"
+#define MXC_CCM_CLPCR 0x54
+#define MXC_CCM_CLPCR_LPM_OFFSET 0
+#define MXC_CCM_CLPCR_LPM_MASK 0x3
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET 9
+#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
+#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
+
+#define MXC_CORTEXA8_PLAT_LPC 0xc
+#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
+
+#define MXC_SRPG_NEON_SRPGCR 0x280
+#define MXC_SRPG_ARM_SRPGCR 0x2a0
+#define MXC_SRPG_EMPGC0_SRPGCR 0x2c0
+#define MXC_SRPG_EMPGC1_SRPGCR 0x2d0
+
+#define MXC_SRPGCR_PCR 1
+
/*
* The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
* This is also the lowest power state possible without affecting
@@ -32,6 +49,30 @@
*/
#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
+struct imx5_pm_data {
+ phys_addr_t cortex_addr;
+ phys_addr_t gpc_addr;
+};
+
+static const struct imx5_pm_data imx51_pm_data __initconst = {
+ .cortex_addr = 0x83fa0000,
+ .gpc_addr = 0x73fd8000,
+};
+
+static const struct imx5_pm_data imx53_pm_data __initconst = {
+ .cortex_addr = 0x63fa0000,
+ .gpc_addr = 0x53fd8000,
+};
+
+static void __iomem *ccm_base;
+static void __iomem *cortex_base;
+static void __iomem *gpc_base;
+
+void __init imx5_pm_set_ccm_base(void __iomem *base)
+{
+ ccm_base = base;
+}
+
/*
* set cpu low power mode before WFI instruction. This function is called
* mx5 because it can be used for mx51, and mx53.
@@ -43,12 +84,16 @@
int stop_mode = 0;
/* always allow platform to issue a deep sleep mode request */
- plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
+ plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
~(MXC_CORTEXA8_PLAT_LPC_DSM);
- ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
- arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
- empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
+ ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) &
+ ~(MXC_CCM_CLPCR_LPM_MASK);
+ arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
+ ~(MXC_SRPGCR_PCR);
+ empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
+ ~(MXC_SRPGCR_PCR);
+ empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
+ ~(MXC_SRPGCR_PCR);
switch (mode) {
case WAIT_CLOCKED:
@@ -82,17 +127,17 @@
return;
}
- __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
- __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
- __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
- __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+ __raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
+ __raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
+ __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
+ __raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
if (stop_mode) {
empgc0 |= MXC_SRPGCR_PCR;
empgc1 |= MXC_SRPGCR_PCR;
- __raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
+ __raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
}
}
@@ -114,8 +159,8 @@
flush_cache_all();
/*clear the EMPGC0/1 bits */
- __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
- __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ __raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
@@ -149,7 +194,7 @@
imx5_cpu_do_idle();
}
-static int __init imx5_pm_common_init(void)
+static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
{
int ret;
struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
@@ -163,15 +208,28 @@
arm_pm_idle = imx5_pm_idle;
+ cortex_base = ioremap(data->cortex_addr, SZ_16K);
+ gpc_base = ioremap(data->gpc_addr, SZ_16K);
+ WARN_ON(!ccm_base || !cortex_base || !gpc_base);
+
/* Set the registers to the default cpu idle state. */
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
- return imx5_cpuidle_init();
+ ret = imx5_cpuidle_init();
+ if (ret)
+ pr_warn("%s: cpuidle init failed %d\n", __func__, ret);
+
+ suspend_set_ops(&mx5_suspend_ops);
+
+ return 0;
}
-void __init imx5_pm_init(void)
+void __init imx51_pm_init(void)
{
- int ret = imx5_pm_common_init();
- if (!ret)
- suspend_set_ops(&mx5_suspend_ops);
+ imx5_pm_common_init(&imx51_pm_data);
+}
+
+void __init imx53_pm_init(void)
+{
+ imx5_pm_common_init(&imx53_pm_data);
}
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 9392a8f..5c3af8f 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -129,6 +129,14 @@
0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */
};
+static const u32 imx6sx_mmdc_io_offset[] __initconst = {
+ 0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
+ 0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */
+ 0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */
+ 0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */
+ 0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
+};
+
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6Q,
.mmdc_compat = "fsl,imx6q-mmdc",
@@ -159,6 +167,16 @@
.mmdc_io_offset = imx6sl_mmdc_io_offset,
};
+static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
+ .cpu_type = MXC_CPU_IMX6SX,
+ .mmdc_compat = "fsl,imx6sx-mmdc",
+ .src_compat = "fsl,imx6sx-src",
+ .iomuxc_compat = "fsl,imx6sx-iomuxc",
+ .gpc_compat = "fsl,imx6sx-gpc",
+ .mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
+ .mmdc_io_offset = imx6sx_mmdc_io_offset,
+};
+
/*
* This structure is for passing necessary data for low level ocram
* suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
@@ -181,11 +199,13 @@
u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
} __aligned(8);
-void imx6q_set_int_mem_clk_lpm(void)
+void imx6q_set_int_mem_clk_lpm(bool enable)
{
u32 val = readl_relaxed(ccm_base + CGPR);
- val |= BM_CGPR_INT_MEM_CLK_LPM;
+ val &= ~BM_CGPR_INT_MEM_CLK_LPM;
+ if (enable)
+ val |= BM_CGPR_INT_MEM_CLK_LPM;
writel_relaxed(val, ccm_base + CGPR);
}
@@ -254,6 +274,14 @@
break;
case STOP_POWER_ON:
val |= 0x2 << BP_CLPCR_LPM;
+ val &= ~BM_CLPCR_VSTBY;
+ val &= ~BM_CLPCR_SBYOS;
+ if (cpu_is_imx6sl())
+ val |= BM_CLPCR_BYPASS_PMIC_READY;
+ if (cpu_is_imx6sl() || cpu_is_imx6sx())
+ val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+ else
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
break;
case WAIT_UNCLOCKED_POWER_OFF:
val |= 0x1 << BP_CLPCR_LPM;
@@ -265,12 +293,12 @@
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
- if (cpu_is_imx6sl()) {
+ if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
+ if (cpu_is_imx6sl() || cpu_is_imx6sx())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
- } else {
+ else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
- }
break;
default:
return -EINVAL;
@@ -314,8 +342,22 @@
static int imx6q_pm_enter(suspend_state_t state)
{
switch (state) {
+ case PM_SUSPEND_STANDBY:
+ imx6q_set_lpm(STOP_POWER_ON);
+ imx6q_set_int_mem_clk_lpm(true);
+ imx_gpc_pre_suspend(false);
+ if (cpu_is_imx6sl())
+ imx6sl_set_wait_clk(true);
+ /* Zzz ... */
+ cpu_do_idle();
+ if (cpu_is_imx6sl())
+ imx6sl_set_wait_clk(false);
+ imx_gpc_post_resume();
+ imx6q_set_lpm(WAIT_CLOCKED);
+ break;
case PM_SUSPEND_MEM:
imx6q_set_lpm(STOP_POWER_OFF);
+ imx6q_set_int_mem_clk_lpm(false);
imx6q_enable_wb(true);
/*
* For suspend into ocram, asm code already take care of
@@ -323,7 +365,7 @@
*/
if (!imx6_suspend_in_ocram_fn)
imx6q_enable_rbc(true);
- imx_gpc_pre_suspend();
+ imx_gpc_pre_suspend(true);
imx_anatop_pre_suspend();
imx_set_cpu_jump(0, v7_cpu_resume);
/* Zzz ... */
@@ -334,6 +376,7 @@
imx_gpc_post_resume();
imx6q_enable_rbc(false);
imx6q_enable_wb(false);
+ imx6q_set_int_mem_clk_lpm(true);
imx6q_set_lpm(WAIT_CLOCKED);
break;
default:
@@ -343,9 +386,14 @@
return 0;
}
+static int imx6q_pm_valid(suspend_state_t state)
+{
+ return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM);
+}
+
static const struct platform_suspend_ops imx6q_pm_ops = {
.enter = imx6q_pm_enter,
- .valid = suspend_valid_only_mem,
+ .valid = imx6q_pm_valid,
};
void __init imx6q_pm_set_ccm_base(void __iomem *base)
@@ -549,3 +597,8 @@
{
imx6_pm_common_init(&imx6sl_pm_data);
}
+
+void __init imx6sx_pm_init(void)
+{
+ imx6_pm_common_init(&imx6sx_pm_data);
+}
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 3b0733e..d14c33f 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -42,7 +42,10 @@
{
unsigned int wcr_enable;
- if (wdog_clk)
+ if (!wdog_base)
+ goto reset_fallback;
+
+ if (!IS_ERR(wdog_clk))
clk_enable(wdog_clk);
if (cpu_is_mx1())
@@ -70,6 +73,7 @@
/* delay to allow the serial port to show the message */
mdelay(50);
+reset_fallback:
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}
@@ -79,13 +83,10 @@
wdog_base = base;
wdog_clk = clk_get_sys("imx2-wdt.0", NULL);
- if (IS_ERR(wdog_clk)) {
+ if (IS_ERR(wdog_clk))
pr_warn("%s: failed to get wdog clock\n", __func__);
- wdog_clk = NULL;
- return;
- }
-
- clk_prepare(wdog_clk);
+ else
+ clk_prepare(wdog_clk);
}
void __init mxc_arch_reset_init_dt(void)
@@ -97,13 +98,10 @@
WARN_ON(!wdog_base);
wdog_clk = of_clk_get(np, 0);
- if (IS_ERR(wdog_clk)) {
+ if (IS_ERR(wdog_clk))
pr_warn("%s: failed to get wdog clock\n", __func__);
- wdog_clk = NULL;
- return;
- }
-
- clk_prepare(wdog_clk);
+ else
+ clk_prepare(wdog_clk);
}
#ifdef CONFIG_CACHE_L2X0
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index bed081e..bf92e5a 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -290,25 +290,20 @@
return 0;
}
-void __init mxc_timer_init(void __iomem *base, int irq)
+static void __init _mxc_timer_init(int irq,
+ struct clk *clk_per, struct clk *clk_ipg)
{
uint32_t tctl_val;
- struct clk *timer_clk;
- struct clk *timer_ipg_clk;
- timer_clk = clk_get_sys("imx-gpt.0", "per");
- if (IS_ERR(timer_clk)) {
+ if (IS_ERR(clk_per)) {
pr_err("i.MX timer: unable to get clk\n");
return;
}
- timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
- if (!IS_ERR(timer_ipg_clk))
- clk_prepare_enable(timer_ipg_clk);
+ if (!IS_ERR(clk_ipg))
+ clk_prepare_enable(clk_ipg);
- clk_prepare_enable(timer_clk);
-
- timer_base = base;
+ clk_prepare_enable(clk_per);
/*
* Initialise to a known state (all timers off, and timing reset)
@@ -325,21 +320,45 @@
__raw_writel(tctl_val, timer_base + MXC_TCTL);
/* init and register the timer to the framework */
- mxc_clocksource_init(timer_clk);
- mxc_clockevent_init(timer_clk);
+ mxc_clocksource_init(clk_per);
+ mxc_clockevent_init(clk_per);
/* Make irqs happen */
setup_irq(irq, &mxc_timer_irq);
}
-void __init mxc_timer_init_dt(struct device_node *np)
+void __init mxc_timer_init(void __iomem *base, int irq)
{
- void __iomem *base;
+ struct clk *clk_per = clk_get_sys("imx-gpt.0", "per");
+ struct clk *clk_ipg = clk_get_sys("imx-gpt.0", "ipg");
+
+ timer_base = base;
+
+ _mxc_timer_init(irq, clk_per, clk_ipg);
+}
+
+static void __init mxc_timer_init_dt(struct device_node *np)
+{
+ struct clk *clk_per, *clk_ipg;
int irq;
- base = of_iomap(np, 0);
- WARN_ON(!base);
+ if (timer_base)
+ return;
+
+ timer_base = of_iomap(np, 0);
+ WARN_ON(!timer_base);
irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(base, irq);
+ clk_per = of_clk_get_by_name(np, "per");
+ clk_ipg = of_clk_get_by_name(np, "ipg");
+
+ _mxc_timer_init(irq, clk_per, clk_ipg);
}
+CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx25_timer, "fsl,imx25-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx50_timer, "fsl,imx50-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx51_timer, "fsl,imx51-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx53_timer, "fsl,imx53-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx6q_timer, "fsl,imx6q-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx6sl_timer, "fsl,imx6sl-gpt", mxc_timer_init_dt);
+CLOCKSOURCE_OF_DECLARE(mx6sx_timer, "fsl,imx6sx-gpt", mxc_timer_init_dt);
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 7828af4..1d4f384 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
@@ -153,13 +154,16 @@
* interrupts. It registers the interrupt enable and disable functions
* to the kernel for each interrupt source.
*/
-void __init tzic_init_irq(void __iomem *irqbase)
+void __init tzic_init_irq(void)
{
struct device_node *np;
int irq_base;
int i;
- tzic_base = irqbase;
+ np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
+ tzic_base = of_iomap(np, 0);
+ WARN_ON(!tzic_base);
+
/* put the TZIC into the reset value with
* all interrupts disabled
*/
@@ -181,7 +185,6 @@
irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
WARN_ON(irq_base < 0);
- np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
&irq_domain_simple_ops, NULL);
WARN_ON(!domain);
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8ca99e9..06bbadc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -176,13 +176,11 @@
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
-obj-$(CONFIG_SOC_OMAP2420) += cclock2420_data.o
-obj-$(CONFIG_SOC_OMAP2430) += clock2430.o cclock2430_data.o
+obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c
deleted file mode 100644
index 3662f4d..0000000
--- a/arch/arm/mach-omap2/cclock2420_data.c
+++ /dev/null
@@ -1,1931 +0,0 @@
-/*
- * OMAP2420 clock data
- *
- * Copyright (C) 2005-2012 Texas Instruments, Inc.
- * Copyright (C) 2004-2011 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- * Updated to COMMON clk format by Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk-private.h>
-#include <linux/list.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "cm2xxx.h"
-#include "prm2xxx.h"
-#include "prm-regbits-24xx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-#include "control.h"
-
-#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
-
-/*
- * 2420 clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent. In
- * many cases the parent is selectable. The set parent calls will
- * also switch sources.
- *
- * Several sources are given initial rates which may be wrong, this will
- * be fixed up in the init func.
- *
- * Things are broadly separated below by clock domains. It is
- * noteworthy that most peripherals have dependencies on multiple clock
- * domains. Many get their interface clocks from the L4 domain, but get
- * functional clocks from fixed sources or other core domain derived
- * clocks.
- */
-
-DEFINE_CLK_FIXED_RATE(alt_ck, CLK_IS_ROOT, 54000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(func_32k_ck, CLK_IS_ROOT, 32768, 0x0);
-
-DEFINE_CLK_FIXED_RATE(mcbsp_clks, CLK_IS_ROOT, 0x0, 0x0);
-
-static struct clk osc_ck;
-
-static const struct clk_ops osc_ck_ops = {
- .recalc_rate = &omap2_osc_clk_recalc,
-};
-
-static struct clk_hw_omap osc_ck_hw = {
- .hw = {
- .clk = &osc_ck,
- },
-};
-
-static struct clk osc_ck = {
- .name = "osc_ck",
- .ops = &osc_ck_ops,
- .hw = &osc_ck_hw.hw,
- .flags = CLK_IS_ROOT,
-};
-
-DEFINE_CLK_FIXED_RATE(secure_32k_ck, CLK_IS_ROOT, 32768, 0x0);
-
-static struct clk sys_ck;
-
-static const char *sys_ck_parent_names[] = {
- "osc_ck",
-};
-
-static const struct clk_ops sys_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .recalc_rate = &omap2xxx_sys_clk_recalc,
-};
-
-DEFINE_STRUCT_CLK_HW_OMAP(sys_ck, "wkup_clkdm");
-DEFINE_STRUCT_CLK(sys_ck, sys_ck_parent_names, sys_ck_ops);
-
-static struct dpll_data dpll_dd = {
- .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .mult_mask = OMAP24XX_DPLL_MULT_MASK,
- .div1_mask = OMAP24XX_DPLL_DIV_MASK,
- .clk_bypass = &sys_ck,
- .clk_ref = &sys_ck,
- .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_mask = OMAP24XX_EN_DPLL_MASK,
- .max_multiplier = 1023,
- .min_divider = 1,
- .max_divider = 16,
-};
-
-static struct clk dpll_ck;
-
-static const char *dpll_ck_parent_names[] = {
- "sys_ck",
-};
-
-static const struct clk_ops dpll_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .get_parent = &omap2_init_dpll_parent,
- .recalc_rate = &omap2_dpllcore_recalc,
- .round_rate = &omap2_dpll_round_rate,
- .set_rate = &omap2_reprogram_dpllcore,
-};
-
-static struct clk_hw_omap dpll_ck_hw = {
- .hw = {
- .clk = &dpll_ck,
- },
- .ops = &clkhwops_omap2xxx_dpll,
- .dpll_data = &dpll_dd,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(dpll_ck, dpll_ck_parent_names, dpll_ck_ops);
-
-static struct clk core_ck;
-
-static const char *core_ck_parent_names[] = {
- "dpll_ck",
-};
-
-static const struct clk_ops core_ck_ops = {
- .init = &omap2_init_clk_clkdm,
-};
-
-DEFINE_STRUCT_CLK_HW_OMAP(core_ck, "wkup_clkdm");
-DEFINE_STRUCT_CLK(core_ck, core_ck_parent_names, core_ck_ops);
-
-DEFINE_CLK_DIVIDER(core_l3_ck, "core_ck", &core_ck, 0x0,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_L3_SHIFT, OMAP24XX_CLKSEL_L3_WIDTH,
- CLK_DIVIDER_ONE_BASED, NULL);
-
-DEFINE_CLK_DIVIDER(l4_ck, "core_l3_ck", &core_l3_ck, 0x0,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_L4_SHIFT, OMAP24XX_CLKSEL_L4_WIDTH,
- CLK_DIVIDER_ONE_BASED, NULL);
-
-static struct clk aes_ick;
-
-static const char *aes_ick_parent_names[] = {
- "l4_ck",
-};
-
-static const struct clk_ops aes_ick_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_dflt_clk_enable,
- .disable = &omap2_dflt_clk_disable,
- .is_enabled = &omap2_dflt_clk_is_enabled,
-};
-
-static struct clk_hw_omap aes_ick_hw = {
- .hw = {
- .clk = &aes_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_AES_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(aes_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk apll54_ck;
-
-static const struct clk_ops apll54_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_clk_apll54_enable,
- .disable = &omap2_clk_apll54_disable,
- .recalc_rate = &omap2_clk_apll54_recalc,
-};
-
-static struct clk_hw_omap apll54_ck_hw = {
- .hw = {
- .clk = &apll54_ck,
- },
- .ops = &clkhwops_apll54,
- .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(apll54_ck, dpll_ck_parent_names, apll54_ck_ops);
-
-static struct clk apll96_ck;
-
-static const struct clk_ops apll96_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_clk_apll96_enable,
- .disable = &omap2_clk_apll96_disable,
- .recalc_rate = &omap2_clk_apll96_recalc,
-};
-
-static struct clk_hw_omap apll96_ck_hw = {
- .hw = {
- .clk = &apll96_ck,
- },
- .ops = &clkhwops_apll96,
- .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(apll96_ck, dpll_ck_parent_names, apll96_ck_ops);
-
-static struct clk func_96m_ck;
-
-static const char *func_96m_ck_parent_names[] = {
- "apll96_ck",
-};
-
-DEFINE_STRUCT_CLK_HW_OMAP(func_96m_ck, "wkup_clkdm");
-DEFINE_STRUCT_CLK(func_96m_ck, func_96m_ck_parent_names, core_ck_ops);
-
-static struct clk cam_fck;
-
-static const char *cam_fck_parent_names[] = {
- "func_96m_ck",
-};
-
-static struct clk_hw_omap cam_fck_hw = {
- .hw = {
- .clk = &cam_fck,
- },
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_CAM_SHIFT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(cam_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk cam_ick;
-
-static struct clk_hw_omap cam_ick_hw = {
- .hw = {
- .clk = &cam_ick,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_CAM_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(cam_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk des_ick;
-
-static struct clk_hw_omap des_ick_hw = {
- .hw = {
- .clk = &des_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_DES_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(des_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clksel_rate dsp_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 12, .val = 12, .flags = RATE_IN_242X },
- { .div = 0 }
-};
-
-static const struct clksel dsp_fck_clksel[] = {
- { .parent = &core_ck, .rates = dsp_fck_core_rates },
- { .parent = NULL },
-};
-
-static const char *dsp_fck_parent_names[] = {
- "core_ck",
-};
-
-static const struct clk_ops dsp_fck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_dflt_clk_enable,
- .disable = &omap2_dflt_clk_disable,
- .is_enabled = &omap2_dflt_clk_is_enabled,
- .recalc_rate = &omap2_clksel_recalc,
- .set_rate = &omap2_clksel_set_rate,
- .round_rate = &omap2_clksel_round_rate,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(dsp_fck, "dsp_clkdm", dsp_fck_clksel,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
- OMAP24XX_CLKSEL_DSP_MASK,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, &clkhwops_wait,
- dsp_fck_parent_names, dsp_fck_ops);
-
-static const struct clksel dsp_ick_clksel[] = {
- { .parent = &dsp_fck, .rates = dsp_ick_rates },
- { .parent = NULL },
-};
-
-static const char *dsp_ick_parent_names[] = {
- "dsp_fck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(dsp_ick, "dsp_clkdm", dsp_ick_clksel,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
- OMAP24XX_CLKSEL_DSP_IF_MASK,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
- OMAP2420_EN_DSP_IPI_SHIFT, &clkhwops_iclk_wait,
- dsp_ick_parent_names, dsp_fck_ops);
-
-static const struct clksel_rate dss1_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate dss1_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 5, .val = 5, .flags = RATE_IN_24XX },
- { .div = 6, .val = 6, .flags = RATE_IN_24XX },
- { .div = 8, .val = 8, .flags = RATE_IN_24XX },
- { .div = 9, .val = 9, .flags = RATE_IN_24XX },
- { .div = 12, .val = 12, .flags = RATE_IN_24XX },
- { .div = 16, .val = 16, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel dss1_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dss1_fck_sys_rates },
- { .parent = &core_ck, .rates = dss1_fck_core_rates },
- { .parent = NULL },
-};
-
-static const char *dss1_fck_parent_names[] = {
- "sys_ck", "core_ck",
-};
-
-static struct clk dss1_fck;
-
-static const struct clk_ops dss1_fck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_dflt_clk_enable,
- .disable = &omap2_dflt_clk_disable,
- .is_enabled = &omap2_dflt_clk_is_enabled,
- .recalc_rate = &omap2_clksel_recalc,
- .get_parent = &omap2_clksel_find_parent_index,
- .set_parent = &omap2_clksel_set_parent,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(dss1_fck, "dss_clkdm", dss1_fck_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_DSS1_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_DSS1_SHIFT, NULL,
- dss1_fck_parent_names, dss1_fck_ops);
-
-static const struct clksel_rate dss2_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate dss2_fck_48m_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate func_48m_apll96_rates[] = {
- { .div = 2, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate func_48m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel func_48m_clksel[] = {
- { .parent = &apll96_ck, .rates = func_48m_apll96_rates },
- { .parent = &alt_ck, .rates = func_48m_alt_rates },
- { .parent = NULL },
-};
-
-static const char *func_48m_ck_parent_names[] = {
- "apll96_ck", "alt_ck",
-};
-
-static struct clk func_48m_ck;
-
-static const struct clk_ops func_48m_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .recalc_rate = &omap2_clksel_recalc,
- .set_rate = &omap2_clksel_set_rate,
- .round_rate = &omap2_clksel_round_rate,
- .get_parent = &omap2_clksel_find_parent_index,
- .set_parent = &omap2_clksel_set_parent,
-};
-
-static struct clk_hw_omap func_48m_ck_hw = {
- .hw = {
- .clk = &func_48m_ck,
- },
- .clksel = func_48m_clksel,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_48M_SOURCE_MASK,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(func_48m_ck, func_48m_ck_parent_names, func_48m_ck_ops);
-
-static const struct clksel dss2_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dss2_fck_sys_rates },
- { .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
- { .parent = NULL },
-};
-
-static const char *dss2_fck_parent_names[] = {
- "sys_ck", "func_48m_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(dss2_fck, "dss_clkdm", dss2_fck_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_DSS2_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_DSS2_SHIFT, NULL,
- dss2_fck_parent_names, dss1_fck_ops);
-
-static const char *func_54m_ck_parent_names[] = {
- "apll54_ck", "alt_ck",
-};
-
-DEFINE_CLK_MUX(func_54m_ck, func_54m_ck_parent_names, NULL, 0x0,
- OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- OMAP24XX_54M_SOURCE_SHIFT, OMAP24XX_54M_SOURCE_WIDTH,
- 0x0, NULL);
-
-static struct clk dss_54m_fck;
-
-static const char *dss_54m_fck_parent_names[] = {
- "func_54m_ck",
-};
-
-static struct clk_hw_omap dss_54m_fck_hw = {
- .hw = {
- .clk = &dss_54m_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_TV_SHIFT,
- .clkdm_name = "dss_clkdm",
-};
-
-DEFINE_STRUCT_CLK(dss_54m_fck, dss_54m_fck_parent_names, aes_ick_ops);
-
-static struct clk dss_ick;
-
-static struct clk_hw_omap dss_ick_hw = {
- .hw = {
- .clk = &dss_ick,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_DSS1_SHIFT,
- .clkdm_name = "dss_clkdm",
-};
-
-DEFINE_STRUCT_CLK(dss_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk eac_fck;
-
-static struct clk_hw_omap eac_fck_hw = {
- .hw = {
- .clk = &eac_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_EAC_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(eac_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk eac_ick;
-
-static struct clk_hw_omap eac_ick_hw = {
- .hw = {
- .clk = &eac_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_EAC_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(eac_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk emul_ck;
-
-static struct clk_hw_omap emul_ck_hw = {
- .hw = {
- .clk = &emul_ck,
- },
- .enable_reg = OMAP2420_PRCM_CLKEMUL_CTRL,
- .enable_bit = OMAP24XX_EMULATION_EN_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(emul_ck, dss_54m_fck_parent_names, aes_ick_ops);
-
-DEFINE_CLK_FIXED_FACTOR(func_12m_ck, "func_48m_ck", &func_48m_ck, 0x0, 1, 4);
-
-static struct clk fac_fck;
-
-static const char *fac_fck_parent_names[] = {
- "func_12m_ck",
-};
-
-static struct clk_hw_omap fac_fck_hw = {
- .hw = {
- .clk = &fac_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_FAC_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(fac_fck, fac_fck_parent_names, aes_ick_ops);
-
-static struct clk fac_ick;
-
-static struct clk_hw_omap fac_ick_hw = {
- .hw = {
- .clk = &fac_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_FAC_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(fac_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clksel gfx_fck_clksel[] = {
- { .parent = &core_l3_ck, .rates = gfx_l3_rates },
- { .parent = NULL },
-};
-
-static const char *gfx_2d_fck_parent_names[] = {
- "core_l3_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(gfx_2d_fck, "gfx_clkdm", gfx_fck_clksel,
- OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
- OMAP_CLKSEL_GFX_MASK,
- OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
- OMAP24XX_EN_2D_SHIFT, &clkhwops_wait,
- gfx_2d_fck_parent_names, dsp_fck_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gfx_3d_fck, "gfx_clkdm", gfx_fck_clksel,
- OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
- OMAP_CLKSEL_GFX_MASK,
- OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
- OMAP24XX_EN_3D_SHIFT, &clkhwops_wait,
- gfx_2d_fck_parent_names, dsp_fck_ops);
-
-static struct clk gfx_ick;
-
-static const char *gfx_ick_parent_names[] = {
- "core_l3_ck",
-};
-
-static struct clk_hw_omap gfx_ick_hw = {
- .hw = {
- .clk = &gfx_ick,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
- .enable_bit = OMAP_EN_GFX_SHIFT,
- .clkdm_name = "gfx_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gfx_ick, gfx_ick_parent_names, aes_ick_ops);
-
-static struct clk gpios_fck;
-
-static const char *gpios_fck_parent_names[] = {
- "func_32k_ck",
-};
-
-static struct clk_hw_omap gpios_fck_hw = {
- .hw = {
- .clk = &gpios_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpios_fck, gpios_fck_parent_names, aes_ick_ops);
-
-static struct clk gpios_ick;
-
-static const char *gpios_ick_parent_names[] = {
- "sys_ck",
-};
-
-static struct clk_hw_omap gpios_ick_hw = {
- .hw = {
- .clk = &gpios_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpios_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static struct clk gpmc_fck;
-
-static struct clk_hw_omap gpmc_fck_hw = {
- .hw = {
- .clk = &gpmc_fck,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
- .enable_bit = OMAP24XX_AUTO_GPMC_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpmc_fck, gfx_ick_parent_names, core_ck_ops);
-
-static const struct clksel_rate gpt_alt_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel omap24xx_gpt_clksel[] = {
- { .parent = &func_32k_ck, .rates = gpt_32k_rates },
- { .parent = &sys_ck, .rates = gpt_sys_rates },
- { .parent = &alt_ck, .rates = gpt_alt_rates },
- { .parent = NULL },
-};
-
-static const char *gpt10_fck_parent_names[] = {
- "func_32k_ck", "sys_ck", "alt_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt10_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT10_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT10_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt10_ick;
-
-static struct clk_hw_omap gpt10_ick_hw = {
- .hw = {
- .clk = &gpt10_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT10_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt10_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt11_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT11_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT11_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt11_ick;
-
-static struct clk_hw_omap gpt11_ick_hw = {
- .hw = {
- .clk = &gpt11_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT11_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt11_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt12_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT12_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT12_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt12_ick;
-
-static struct clk_hw_omap gpt12_ick_hw = {
- .hw = {
- .clk = &gpt12_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT12_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt12_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clk_ops gpt1_fck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_dflt_clk_enable,
- .disable = &omap2_dflt_clk_disable,
- .is_enabled = &omap2_dflt_clk_is_enabled,
- .recalc_rate = &omap2_clksel_recalc,
- .set_rate = &omap2_clksel_set_rate,
- .round_rate = &omap2_clksel_round_rate,
- .get_parent = &omap2_clksel_find_parent_index,
- .set_parent = &omap2_clksel_set_parent,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt1_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_GPT1_MASK,
- OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
- OMAP24XX_EN_GPT1_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, gpt1_fck_ops);
-
-static struct clk gpt1_ick;
-
-static struct clk_hw_omap gpt1_ick_hw = {
- .hw = {
- .clk = &gpt1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_GPT1_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt1_ick, gpios_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt2_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT2_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT2_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt2_ick;
-
-static struct clk_hw_omap gpt2_ick_hw = {
- .hw = {
- .clk = &gpt2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt2_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt3_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT3_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT3_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt3_ick;
-
-static struct clk_hw_omap gpt3_ick_hw = {
- .hw = {
- .clk = &gpt3_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt3_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt4_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT4_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT4_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt4_ick;
-
-static struct clk_hw_omap gpt4_ick_hw = {
- .hw = {
- .clk = &gpt4_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT4_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt4_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt5_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT5_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT5_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt5_ick;
-
-static struct clk_hw_omap gpt5_ick_hw = {
- .hw = {
- .clk = &gpt5_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT5_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt5_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt6_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT6_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT6_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt6_ick;
-
-static struct clk_hw_omap gpt6_ick_hw = {
- .hw = {
- .clk = &gpt6_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT6_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt6_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt7_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT7_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT7_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt7_ick;
-
-static struct clk_hw_omap gpt7_ick_hw = {
- .hw = {
- .clk = &gpt7_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT7_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt7_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt8_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT8_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT8_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt8_ick;
-
-static struct clk_hw_omap gpt8_ick_hw = {
- .hw = {
- .clk = &gpt8_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT8_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt8_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt9_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT9_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT9_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt9_ick;
-
-static struct clk_hw_omap gpt9_ick_hw = {
- .hw = {
- .clk = &gpt9_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT9_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt9_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk hdq_fck;
-
-static struct clk_hw_omap hdq_fck_hw = {
- .hw = {
- .clk = &hdq_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_HDQ_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(hdq_fck, fac_fck_parent_names, aes_ick_ops);
-
-static struct clk hdq_ick;
-
-static struct clk_hw_omap hdq_ick_hw = {
- .hw = {
- .clk = &hdq_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_HDQ_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(hdq_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk i2c1_fck;
-
-static struct clk_hw_omap i2c1_fck_hw = {
- .hw = {
- .clk = &i2c1_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_I2C1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(i2c1_fck, fac_fck_parent_names, aes_ick_ops);
-
-static struct clk i2c1_ick;
-
-static struct clk_hw_omap i2c1_ick_hw = {
- .hw = {
- .clk = &i2c1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_I2C1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(i2c1_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk i2c2_fck;
-
-static struct clk_hw_omap i2c2_fck_hw = {
- .hw = {
- .clk = &i2c2_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_I2C2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(i2c2_fck, fac_fck_parent_names, aes_ick_ops);
-
-static struct clk i2c2_ick;
-
-static struct clk_hw_omap i2c2_ick_hw = {
- .hw = {
- .clk = &i2c2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_I2C2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(i2c2_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(iva1_ifck, "iva1_clkdm", dsp_fck_clksel,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
- OMAP2420_CLKSEL_IVA_MASK,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- OMAP2420_EN_IVA_COP_SHIFT, &clkhwops_wait,
- dsp_fck_parent_names, dsp_fck_ops);
-
-static struct clk iva1_mpu_int_ifck;
-
-static const char *iva1_mpu_int_ifck_parent_names[] = {
- "iva1_ifck",
-};
-
-static const struct clk_ops iva1_mpu_int_ifck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_dflt_clk_enable,
- .disable = &omap2_dflt_clk_disable,
- .is_enabled = &omap2_dflt_clk_is_enabled,
- .recalc_rate = &omap_fixed_divisor_recalc,
-};
-
-static struct clk_hw_omap iva1_mpu_int_ifck_hw = {
- .hw = {
- .clk = &iva1_mpu_int_ifck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- .enable_bit = OMAP2420_EN_IVA_MPU_SHIFT,
- .clkdm_name = "iva1_clkdm",
- .fixed_div = 2,
-};
-
-DEFINE_STRUCT_CLK(iva1_mpu_int_ifck, iva1_mpu_int_ifck_parent_names,
- iva1_mpu_int_ifck_ops);
-
-static struct clk mailboxes_ick;
-
-static struct clk_hw_omap mailboxes_ick_hw = {
- .hw = {
- .clk = &mailboxes_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mailboxes_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clksel_rate common_mcbsp_96m_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel mcbsp_fck_clksel[] = {
- { .parent = &func_96m_ck, .rates = common_mcbsp_96m_rates },
- { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
- { .parent = NULL },
-};
-
-static const char *mcbsp1_fck_parent_names[] = {
- "func_96m_ck", "mcbsp_clks",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(mcbsp1_fck, "core_l4_clkdm", mcbsp_fck_clksel,
- OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
- OMAP2_MCBSP1_CLKS_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_MCBSP1_SHIFT, &clkhwops_wait,
- mcbsp1_fck_parent_names, dss1_fck_ops);
-
-static struct clk mcbsp1_ick;
-
-static struct clk_hw_omap mcbsp1_ick_hw = {
- .hw = {
- .clk = &mcbsp1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcbsp1_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(mcbsp2_fck, "core_l4_clkdm", mcbsp_fck_clksel,
- OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
- OMAP2_MCBSP2_CLKS_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_MCBSP2_SHIFT, &clkhwops_wait,
- mcbsp1_fck_parent_names, dss1_fck_ops);
-
-static struct clk mcbsp2_ick;
-
-static struct clk_hw_omap mcbsp2_ick_hw = {
- .hw = {
- .clk = &mcbsp2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcbsp2_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk mcspi1_fck;
-
-static const char *mcspi1_fck_parent_names[] = {
- "func_48m_ck",
-};
-
-static struct clk_hw_omap mcspi1_fck_hw = {
- .hw = {
- .clk = &mcspi1_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi1_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk mcspi1_ick;
-
-static struct clk_hw_omap mcspi1_ick_hw = {
- .hw = {
- .clk = &mcspi1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi1_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk mcspi2_fck;
-
-static struct clk_hw_omap mcspi2_fck_hw = {
- .hw = {
- .clk = &mcspi2_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi2_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk mcspi2_ick;
-
-static struct clk_hw_omap mcspi2_ick_hw = {
- .hw = {
- .clk = &mcspi2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi2_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk mmc_fck;
-
-static struct clk_hw_omap mmc_fck_hw = {
- .hw = {
- .clk = &mmc_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_MMC_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mmc_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk mmc_ick;
-
-static struct clk_hw_omap mmc_ick_hw = {
- .hw = {
- .clk = &mmc_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_MMC_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mmc_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_DIVIDER(mpu_ck, "core_ck", &core_ck, 0x0,
- OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
- OMAP24XX_CLKSEL_MPU_SHIFT, OMAP24XX_CLKSEL_MPU_WIDTH,
- CLK_DIVIDER_ONE_BASED, NULL);
-
-static struct clk mpu_wdt_fck;
-
-static struct clk_hw_omap mpu_wdt_fck_hw = {
- .hw = {
- .clk = &mpu_wdt_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mpu_wdt_fck, gpios_fck_parent_names, aes_ick_ops);
-
-static struct clk mpu_wdt_ick;
-
-static struct clk_hw_omap mpu_wdt_ick_hw = {
- .hw = {
- .clk = &mpu_wdt_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mpu_wdt_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static struct clk mspro_fck;
-
-static struct clk_hw_omap mspro_fck_hw = {
- .hw = {
- .clk = &mspro_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mspro_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk mspro_ick;
-
-static struct clk_hw_omap mspro_ick_hw = {
- .hw = {
- .clk = &mspro_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mspro_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk omapctrl_ick;
-
-static struct clk_hw_omap omapctrl_ick_hw = {
- .hw = {
- .clk = &omapctrl_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(omapctrl_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static struct clk pka_ick;
-
-static struct clk_hw_omap pka_ick_hw = {
- .hw = {
- .clk = &pka_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_PKA_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(pka_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk rng_ick;
-
-static struct clk_hw_omap rng_ick_hw = {
- .hw = {
- .clk = &rng_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_RNG_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(rng_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk sdma_fck;
-
-DEFINE_STRUCT_CLK_HW_OMAP(sdma_fck, "core_l3_clkdm");
-DEFINE_STRUCT_CLK(sdma_fck, gfx_ick_parent_names, core_ck_ops);
-
-static struct clk sdma_ick;
-
-static struct clk_hw_omap sdma_ick_hw = {
- .hw = {
- .clk = &sdma_ick,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
- .enable_bit = OMAP24XX_AUTO_SDMA_SHIFT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(sdma_ick, gfx_ick_parent_names, core_ck_ops);
-
-static struct clk sdrc_ick;
-
-static struct clk_hw_omap sdrc_ick_hw = {
- .hw = {
- .clk = &sdrc_ick,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
- .enable_bit = OMAP24XX_AUTO_SDRC_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(sdrc_ick, gfx_ick_parent_names, core_ck_ops);
-
-static struct clk sha_ick;
-
-static struct clk_hw_omap sha_ick_hw = {
- .hw = {
- .clk = &sha_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_SHA_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(sha_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk ssi_l4_ick;
-
-static struct clk_hw_omap ssi_l4_ick_hw = {
- .hw = {
- .clk = &ssi_l4_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP24XX_EN_SSI_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(ssi_l4_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 0 }
-};
-
-static const struct clksel ssi_ssr_sst_fck_clksel[] = {
- { .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
- { .parent = NULL },
-};
-
-static const char *ssi_ssr_sst_fck_parent_names[] = {
- "core_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(ssi_ssr_sst_fck, "core_l3_clkdm",
- ssi_ssr_sst_fck_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_SSI_MASK,
- OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- OMAP24XX_EN_SSI_SHIFT, &clkhwops_wait,
- ssi_ssr_sst_fck_parent_names, dsp_fck_ops);
-
-static struct clk sync_32k_ick;
-
-static struct clk_hw_omap sync_32k_ick_hw = {
- .hw = {
- .clk = &sync_32k_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_32KSYNC_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(sync_32k_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static const struct clksel_rate common_clkout_src_core_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_96m_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_54m_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel common_clkout_src_clksel[] = {
- { .parent = &core_ck, .rates = common_clkout_src_core_rates },
- { .parent = &sys_ck, .rates = common_clkout_src_sys_rates },
- { .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
- { .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
- { .parent = NULL },
-};
-
-static const char *sys_clkout_src_parent_names[] = {
- "core_ck", "sys_ck", "func_96m_ck", "func_54m_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(sys_clkout_src, "wkup_clkdm", common_clkout_src_clksel,
- OMAP2420_PRCM_CLKOUT_CTRL, OMAP24XX_CLKOUT_SOURCE_MASK,
- OMAP2420_PRCM_CLKOUT_CTRL, OMAP24XX_CLKOUT_EN_SHIFT,
- NULL, sys_clkout_src_parent_names, gpt1_fck_ops);
-
-DEFINE_CLK_DIVIDER(sys_clkout, "sys_clkout_src", &sys_clkout_src, 0x0,
- OMAP2420_PRCM_CLKOUT_CTRL, OMAP24XX_CLKOUT_DIV_SHIFT,
- OMAP24XX_CLKOUT_DIV_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-DEFINE_CLK_OMAP_MUX_GATE(sys_clkout2_src, "wkup_clkdm",
- common_clkout_src_clksel, OMAP2420_PRCM_CLKOUT_CTRL,
- OMAP2420_CLKOUT2_SOURCE_MASK,
- OMAP2420_PRCM_CLKOUT_CTRL, OMAP2420_CLKOUT2_EN_SHIFT,
- NULL, sys_clkout_src_parent_names, gpt1_fck_ops);
-
-DEFINE_CLK_DIVIDER(sys_clkout2, "sys_clkout2_src", &sys_clkout2_src, 0x0,
- OMAP2420_PRCM_CLKOUT_CTRL, OMAP2420_CLKOUT2_DIV_SHIFT,
- OMAP2420_CLKOUT2_DIV_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-static struct clk uart1_fck;
-
-static struct clk_hw_omap uart1_fck_hw = {
- .hw = {
- .clk = &uart1_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_UART1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart1_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk uart1_ick;
-
-static struct clk_hw_omap uart1_ick_hw = {
- .hw = {
- .clk = &uart1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_UART1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart1_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk uart2_fck;
-
-static struct clk_hw_omap uart2_fck_hw = {
- .hw = {
- .clk = &uart2_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_UART2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart2_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk uart2_ick;
-
-static struct clk_hw_omap uart2_ick_hw = {
- .hw = {
- .clk = &uart2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_UART2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart2_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk uart3_fck;
-
-static struct clk_hw_omap uart3_fck_hw = {
- .hw = {
- .clk = &uart3_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP24XX_EN_UART3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart3_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk uart3_ick;
-
-static struct clk_hw_omap uart3_ick_hw = {
- .hw = {
- .clk = &uart3_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP24XX_EN_UART3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart3_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk usb_fck;
-
-static struct clk_hw_omap usb_fck_hw = {
- .hw = {
- .clk = &usb_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP24XX_EN_USB_SHIFT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(usb_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel usb_l4_ick_clksel[] = {
- { .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
- { .parent = NULL },
-};
-
-static const char *usb_l4_ick_parent_names[] = {
- "core_l3_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(usb_l4_ick, "core_l4_clkdm", usb_l4_ick_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_USB_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- OMAP24XX_EN_USB_SHIFT, &clkhwops_iclk_wait,
- usb_l4_ick_parent_names, dsp_fck_ops);
-
-static struct clk virt_prcm_set;
-
-static const char *virt_prcm_set_parent_names[] = {
- "mpu_ck",
-};
-
-static const struct clk_ops virt_prcm_set_ops = {
- .recalc_rate = &omap2_table_mpu_recalc,
- .set_rate = &omap2_select_table_rate,
- .round_rate = &omap2_round_to_table_rate,
-};
-
-DEFINE_STRUCT_CLK_HW_OMAP(virt_prcm_set, NULL);
-DEFINE_STRUCT_CLK(virt_prcm_set, virt_prcm_set_parent_names, virt_prcm_set_ops);
-
-static const struct clksel_rate vlynq_fck_96m_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_242X },
- { .div = 0 }
-};
-
-static const struct clksel_rate vlynq_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_242X },
- { .div = 2, .val = 2, .flags = RATE_IN_242X },
- { .div = 3, .val = 3, .flags = RATE_IN_242X },
- { .div = 4, .val = 4, .flags = RATE_IN_242X },
- { .div = 6, .val = 6, .flags = RATE_IN_242X },
- { .div = 8, .val = 8, .flags = RATE_IN_242X },
- { .div = 9, .val = 9, .flags = RATE_IN_242X },
- { .div = 12, .val = 12, .flags = RATE_IN_242X },
- { .div = 16, .val = 16, .flags = RATE_IN_242X },
- { .div = 18, .val = 18, .flags = RATE_IN_242X },
- { .div = 0 }
-};
-
-static const struct clksel vlynq_fck_clksel[] = {
- { .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
- { .parent = &core_ck, .rates = vlynq_fck_core_rates },
- { .parent = NULL },
-};
-
-static const char *vlynq_fck_parent_names[] = {
- "func_96m_ck", "core_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(vlynq_fck, "core_l3_clkdm", vlynq_fck_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP2420_CLKSEL_VLYNQ_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP2420_EN_VLYNQ_SHIFT, &clkhwops_wait,
- vlynq_fck_parent_names, dss1_fck_ops);
-
-static struct clk vlynq_ick;
-
-static struct clk_hw_omap vlynq_ick_hw = {
- .hw = {
- .clk = &vlynq_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_VLYNQ_SHIFT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(vlynq_ick, gfx_ick_parent_names, aes_ick_ops);
-
-static struct clk wdt1_ick;
-
-static struct clk_hw_omap wdt1_ick_hw = {
- .hw = {
- .clk = &wdt1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_WDT1_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(wdt1_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static struct clk wdt3_fck;
-
-static struct clk_hw_omap wdt3_fck_hw = {
- .hw = {
- .clk = &wdt3_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP2420_EN_WDT3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(wdt3_fck, gpios_fck_parent_names, aes_ick_ops);
-
-static struct clk wdt3_ick;
-
-static struct clk_hw_omap wdt3_ick_hw = {
- .hw = {
- .clk = &wdt3_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_WDT3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(wdt3_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk wdt4_fck;
-
-static struct clk_hw_omap wdt4_fck_hw = {
- .hw = {
- .clk = &wdt4_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_WDT4_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(wdt4_fck, gpios_fck_parent_names, aes_ick_ops);
-
-static struct clk wdt4_ick;
-
-static struct clk_hw_omap wdt4_ick_hw = {
- .hw = {
- .clk = &wdt4_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_WDT4_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(wdt4_ick, aes_ick_parent_names, aes_ick_ops);
-
-/*
- * clkdev integration
- */
-
-static struct omap_clk omap2420_clks[] = {
- /* external root sources */
- CLK(NULL, "func_32k_ck", &func_32k_ck),
- CLK(NULL, "secure_32k_ck", &secure_32k_ck),
- CLK(NULL, "osc_ck", &osc_ck),
- CLK(NULL, "sys_ck", &sys_ck),
- CLK(NULL, "alt_ck", &alt_ck),
- CLK(NULL, "mcbsp_clks", &mcbsp_clks),
- /* internal analog sources */
- CLK(NULL, "dpll_ck", &dpll_ck),
- CLK(NULL, "apll96_ck", &apll96_ck),
- CLK(NULL, "apll54_ck", &apll54_ck),
- /* internal prcm root sources */
- CLK(NULL, "func_54m_ck", &func_54m_ck),
- CLK(NULL, "core_ck", &core_ck),
- CLK(NULL, "func_96m_ck", &func_96m_ck),
- CLK(NULL, "func_48m_ck", &func_48m_ck),
- CLK(NULL, "func_12m_ck", &func_12m_ck),
- CLK(NULL, "sys_clkout_src", &sys_clkout_src),
- CLK(NULL, "sys_clkout", &sys_clkout),
- CLK(NULL, "sys_clkout2_src", &sys_clkout2_src),
- CLK(NULL, "sys_clkout2", &sys_clkout2),
- CLK(NULL, "emul_ck", &emul_ck),
- /* mpu domain clocks */
- CLK(NULL, "mpu_ck", &mpu_ck),
- /* dsp domain clocks */
- CLK(NULL, "dsp_fck", &dsp_fck),
- CLK(NULL, "dsp_ick", &dsp_ick),
- CLK(NULL, "iva1_ifck", &iva1_ifck),
- CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck),
- /* GFX domain clocks */
- CLK(NULL, "gfx_3d_fck", &gfx_3d_fck),
- CLK(NULL, "gfx_2d_fck", &gfx_2d_fck),
- CLK(NULL, "gfx_ick", &gfx_ick),
- /* DSS domain clocks */
- CLK("omapdss_dss", "ick", &dss_ick),
- CLK(NULL, "dss_ick", &dss_ick),
- CLK(NULL, "dss1_fck", &dss1_fck),
- CLK(NULL, "dss2_fck", &dss2_fck),
- CLK(NULL, "dss_54m_fck", &dss_54m_fck),
- /* L3 domain clocks */
- CLK(NULL, "core_l3_ck", &core_l3_ck),
- CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck),
- CLK(NULL, "usb_l4_ick", &usb_l4_ick),
- /* L4 domain clocks */
- CLK(NULL, "l4_ck", &l4_ck),
- CLK(NULL, "ssi_l4_ick", &ssi_l4_ick),
- /* virtual meta-group clock */
- CLK(NULL, "virt_prcm_set", &virt_prcm_set),
- /* general l4 interface ck, multi-parent functional clk */
- CLK(NULL, "gpt1_ick", &gpt1_ick),
- CLK(NULL, "gpt1_fck", &gpt1_fck),
- CLK(NULL, "gpt2_ick", &gpt2_ick),
- CLK(NULL, "gpt2_fck", &gpt2_fck),
- CLK(NULL, "gpt3_ick", &gpt3_ick),
- CLK(NULL, "gpt3_fck", &gpt3_fck),
- CLK(NULL, "gpt4_ick", &gpt4_ick),
- CLK(NULL, "gpt4_fck", &gpt4_fck),
- CLK(NULL, "gpt5_ick", &gpt5_ick),
- CLK(NULL, "gpt5_fck", &gpt5_fck),
- CLK(NULL, "gpt6_ick", &gpt6_ick),
- CLK(NULL, "gpt6_fck", &gpt6_fck),
- CLK(NULL, "gpt7_ick", &gpt7_ick),
- CLK(NULL, "gpt7_fck", &gpt7_fck),
- CLK(NULL, "gpt8_ick", &gpt8_ick),
- CLK(NULL, "gpt8_fck", &gpt8_fck),
- CLK(NULL, "gpt9_ick", &gpt9_ick),
- CLK(NULL, "gpt9_fck", &gpt9_fck),
- CLK(NULL, "gpt10_ick", &gpt10_ick),
- CLK(NULL, "gpt10_fck", &gpt10_fck),
- CLK(NULL, "gpt11_ick", &gpt11_ick),
- CLK(NULL, "gpt11_fck", &gpt11_fck),
- CLK(NULL, "gpt12_ick", &gpt12_ick),
- CLK(NULL, "gpt12_fck", &gpt12_fck),
- CLK("omap-mcbsp.1", "ick", &mcbsp1_ick),
- CLK(NULL, "mcbsp1_ick", &mcbsp1_ick),
- CLK(NULL, "mcbsp1_fck", &mcbsp1_fck),
- CLK("omap-mcbsp.2", "ick", &mcbsp2_ick),
- CLK(NULL, "mcbsp2_ick", &mcbsp2_ick),
- CLK(NULL, "mcbsp2_fck", &mcbsp2_fck),
- CLK("omap2_mcspi.1", "ick", &mcspi1_ick),
- CLK(NULL, "mcspi1_ick", &mcspi1_ick),
- CLK(NULL, "mcspi1_fck", &mcspi1_fck),
- CLK("omap2_mcspi.2", "ick", &mcspi2_ick),
- CLK(NULL, "mcspi2_ick", &mcspi2_ick),
- CLK(NULL, "mcspi2_fck", &mcspi2_fck),
- CLK(NULL, "uart1_ick", &uart1_ick),
- CLK(NULL, "uart1_fck", &uart1_fck),
- CLK(NULL, "uart2_ick", &uart2_ick),
- CLK(NULL, "uart2_fck", &uart2_fck),
- CLK(NULL, "uart3_ick", &uart3_ick),
- CLK(NULL, "uart3_fck", &uart3_fck),
- CLK(NULL, "gpios_ick", &gpios_ick),
- CLK(NULL, "gpios_fck", &gpios_fck),
- CLK("omap_wdt", "ick", &mpu_wdt_ick),
- CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick),
- CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck),
- CLK(NULL, "sync_32k_ick", &sync_32k_ick),
- CLK(NULL, "wdt1_ick", &wdt1_ick),
- CLK(NULL, "omapctrl_ick", &omapctrl_ick),
- CLK("omap24xxcam", "fck", &cam_fck),
- CLK(NULL, "cam_fck", &cam_fck),
- CLK("omap24xxcam", "ick", &cam_ick),
- CLK(NULL, "cam_ick", &cam_ick),
- CLK(NULL, "mailboxes_ick", &mailboxes_ick),
- CLK(NULL, "wdt4_ick", &wdt4_ick),
- CLK(NULL, "wdt4_fck", &wdt4_fck),
- CLK(NULL, "wdt3_ick", &wdt3_ick),
- CLK(NULL, "wdt3_fck", &wdt3_fck),
- CLK(NULL, "mspro_ick", &mspro_ick),
- CLK(NULL, "mspro_fck", &mspro_fck),
- CLK("mmci-omap.0", "ick", &mmc_ick),
- CLK(NULL, "mmc_ick", &mmc_ick),
- CLK("mmci-omap.0", "fck", &mmc_fck),
- CLK(NULL, "mmc_fck", &mmc_fck),
- CLK(NULL, "fac_ick", &fac_ick),
- CLK(NULL, "fac_fck", &fac_fck),
- CLK(NULL, "eac_ick", &eac_ick),
- CLK(NULL, "eac_fck", &eac_fck),
- CLK("omap_hdq.0", "ick", &hdq_ick),
- CLK(NULL, "hdq_ick", &hdq_ick),
- CLK("omap_hdq.0", "fck", &hdq_fck),
- CLK(NULL, "hdq_fck", &hdq_fck),
- CLK("omap_i2c.1", "ick", &i2c1_ick),
- CLK(NULL, "i2c1_ick", &i2c1_ick),
- CLK(NULL, "i2c1_fck", &i2c1_fck),
- CLK("omap_i2c.2", "ick", &i2c2_ick),
- CLK(NULL, "i2c2_ick", &i2c2_ick),
- CLK(NULL, "i2c2_fck", &i2c2_fck),
- CLK(NULL, "gpmc_fck", &gpmc_fck),
- CLK(NULL, "sdma_fck", &sdma_fck),
- CLK(NULL, "sdma_ick", &sdma_ick),
- CLK(NULL, "sdrc_ick", &sdrc_ick),
- CLK(NULL, "vlynq_ick", &vlynq_ick),
- CLK(NULL, "vlynq_fck", &vlynq_fck),
- CLK(NULL, "des_ick", &des_ick),
- CLK("omap-sham", "ick", &sha_ick),
- CLK(NULL, "sha_ick", &sha_ick),
- CLK("omap_rng", "ick", &rng_ick),
- CLK(NULL, "rng_ick", &rng_ick),
- CLK("omap-aes", "ick", &aes_ick),
- CLK(NULL, "aes_ick", &aes_ick),
- CLK(NULL, "pka_ick", &pka_ick),
- CLK(NULL, "usb_fck", &usb_fck),
- CLK("musb-hdrc", "fck", &osc_ck),
- CLK(NULL, "timer_32k_ck", &func_32k_ck),
- CLK(NULL, "timer_sys_ck", &sys_ck),
- CLK(NULL, "timer_ext_ck", &alt_ck),
- CLK(NULL, "cpufreq_ck", &virt_prcm_set),
-};
-
-
-static const char *enable_init_clks[] = {
- "apll96_ck",
- "apll54_ck",
- "sync_32k_ick",
- "omapctrl_ick",
- "gpmc_fck",
- "sdrc_ick",
-};
-
-/*
- * init code
- */
-
-int __init omap2420_clk_init(void)
-{
- prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
- cpu_mask = RATE_IN_242X;
- rate_table = omap2420_rate_table;
-
- omap2xxx_clkt_dpllcore_init(&dpll_ck_hw.hw);
-
- omap2xxx_clkt_vps_check_bootloader_rates();
-
- omap_clocks_register(omap2420_clks, ARRAY_SIZE(omap2420_clks));
-
- omap2xxx_clkt_vps_late_init();
-
- omap2_clk_disable_autoidle_all();
-
- omap2_clk_enable_init_clocks(enable_init_clks,
- ARRAY_SIZE(enable_init_clks));
-
- pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n",
- (clk_get_rate(&sys_ck) / 1000000),
- (clk_get_rate(&sys_ck) / 100000) % 10,
- (clk_get_rate(&dpll_ck) / 1000000),
- (clk_get_rate(&mpu_ck) / 1000000));
-
- return 0;
-}
diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c
deleted file mode 100644
index 5e4b037..0000000
--- a/arch/arm/mach-omap2/cclock2430_data.c
+++ /dev/null
@@ -1,2048 +0,0 @@
-/*
- * OMAP2430 clock data
- *
- * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc.
- * Copyright (C) 2004-2011 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clk-private.h>
-#include <linux/list.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "cm2xxx.h"
-#include "prm2xxx.h"
-#include "prm-regbits-24xx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-#include "control.h"
-
-#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
-
-/*
- * 2430 clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent. In
- * many cases the parent is selectable. The set parent calls will
- * also switch sources.
- *
- * Several sources are given initial rates which may be wrong, this will
- * be fixed up in the init func.
- *
- * Things are broadly separated below by clock domains. It is
- * noteworthy that most peripherals have dependencies on multiple clock
- * domains. Many get their interface clocks from the L4 domain, but get
- * functional clocks from fixed sources or other core domain derived
- * clocks.
- */
-
-DEFINE_CLK_FIXED_RATE(alt_ck, CLK_IS_ROOT, 54000000, 0x0);
-
-DEFINE_CLK_FIXED_RATE(func_32k_ck, CLK_IS_ROOT, 32768, 0x0);
-
-DEFINE_CLK_FIXED_RATE(mcbsp_clks, CLK_IS_ROOT, 0x0, 0x0);
-
-static struct clk osc_ck;
-
-static const struct clk_ops osc_ck_ops = {
- .enable = &omap2_enable_osc_ck,
- .disable = omap2_disable_osc_ck,
- .recalc_rate = &omap2_osc_clk_recalc,
-};
-
-static struct clk_hw_omap osc_ck_hw = {
- .hw = {
- .clk = &osc_ck,
- },
-};
-
-static struct clk osc_ck = {
- .name = "osc_ck",
- .ops = &osc_ck_ops,
- .hw = &osc_ck_hw.hw,
- .flags = CLK_IS_ROOT,
-};
-
-DEFINE_CLK_FIXED_RATE(secure_32k_ck, CLK_IS_ROOT, 32768, 0x0);
-
-static struct clk sys_ck;
-
-static const char *sys_ck_parent_names[] = {
- "osc_ck",
-};
-
-static const struct clk_ops sys_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .recalc_rate = &omap2xxx_sys_clk_recalc,
-};
-
-DEFINE_STRUCT_CLK_HW_OMAP(sys_ck, "wkup_clkdm");
-DEFINE_STRUCT_CLK(sys_ck, sys_ck_parent_names, sys_ck_ops);
-
-static struct dpll_data dpll_dd = {
- .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .mult_mask = OMAP24XX_DPLL_MULT_MASK,
- .div1_mask = OMAP24XX_DPLL_DIV_MASK,
- .clk_bypass = &sys_ck,
- .clk_ref = &sys_ck,
- .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_mask = OMAP24XX_EN_DPLL_MASK,
- .max_multiplier = 1023,
- .min_divider = 1,
- .max_divider = 16,
-};
-
-static struct clk dpll_ck;
-
-static const char *dpll_ck_parent_names[] = {
- "sys_ck",
-};
-
-static const struct clk_ops dpll_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .get_parent = &omap2_init_dpll_parent,
- .recalc_rate = &omap2_dpllcore_recalc,
- .round_rate = &omap2_dpll_round_rate,
- .set_rate = &omap2_reprogram_dpllcore,
-};
-
-static struct clk_hw_omap dpll_ck_hw = {
- .hw = {
- .clk = &dpll_ck,
- },
- .ops = &clkhwops_omap2xxx_dpll,
- .dpll_data = &dpll_dd,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(dpll_ck, dpll_ck_parent_names, dpll_ck_ops);
-
-static struct clk core_ck;
-
-static const char *core_ck_parent_names[] = {
- "dpll_ck",
-};
-
-static const struct clk_ops core_ck_ops = {
- .init = &omap2_init_clk_clkdm,
-};
-
-DEFINE_STRUCT_CLK_HW_OMAP(core_ck, "wkup_clkdm");
-DEFINE_STRUCT_CLK(core_ck, core_ck_parent_names, core_ck_ops);
-
-DEFINE_CLK_DIVIDER(core_l3_ck, "core_ck", &core_ck, 0x0,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_L3_SHIFT, OMAP24XX_CLKSEL_L3_WIDTH,
- CLK_DIVIDER_ONE_BASED, NULL);
-
-DEFINE_CLK_DIVIDER(l4_ck, "core_l3_ck", &core_l3_ck, 0x0,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_L4_SHIFT, OMAP24XX_CLKSEL_L4_WIDTH,
- CLK_DIVIDER_ONE_BASED, NULL);
-
-static struct clk aes_ick;
-
-static const char *aes_ick_parent_names[] = {
- "l4_ck",
-};
-
-static const struct clk_ops aes_ick_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_dflt_clk_enable,
- .disable = &omap2_dflt_clk_disable,
- .is_enabled = &omap2_dflt_clk_is_enabled,
-};
-
-static struct clk_hw_omap aes_ick_hw = {
- .hw = {
- .clk = &aes_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_AES_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(aes_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk apll54_ck;
-
-static const struct clk_ops apll54_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_clk_apll54_enable,
- .disable = &omap2_clk_apll54_disable,
- .recalc_rate = &omap2_clk_apll54_recalc,
-};
-
-static struct clk_hw_omap apll54_ck_hw = {
- .hw = {
- .clk = &apll54_ck,
- },
- .ops = &clkhwops_apll54,
- .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(apll54_ck, dpll_ck_parent_names, apll54_ck_ops);
-
-static struct clk apll96_ck;
-
-static const struct clk_ops apll96_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_clk_apll96_enable,
- .disable = &omap2_clk_apll96_disable,
- .recalc_rate = &omap2_clk_apll96_recalc,
-};
-
-static struct clk_hw_omap apll96_ck_hw = {
- .hw = {
- .clk = &apll96_ck,
- },
- .ops = &clkhwops_apll96,
- .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(apll96_ck, dpll_ck_parent_names, apll96_ck_ops);
-
-static const char *func_96m_ck_parent_names[] = {
- "apll96_ck", "alt_ck",
-};
-
-DEFINE_CLK_MUX(func_96m_ck, func_96m_ck_parent_names, NULL, 0x0,
- OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), OMAP2430_96M_SOURCE_SHIFT,
- OMAP2430_96M_SOURCE_WIDTH, 0x0, NULL);
-
-static struct clk cam_fck;
-
-static const char *cam_fck_parent_names[] = {
- "func_96m_ck",
-};
-
-static struct clk_hw_omap cam_fck_hw = {
- .hw = {
- .clk = &cam_fck,
- },
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_CAM_SHIFT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(cam_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk cam_ick;
-
-static struct clk_hw_omap cam_ick_hw = {
- .hw = {
- .clk = &cam_ick,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_CAM_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(cam_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk des_ick;
-
-static struct clk_hw_omap des_ick_hw = {
- .hw = {
- .clk = &des_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_DES_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(des_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clksel_rate dsp_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel dsp_fck_clksel[] = {
- { .parent = &core_ck, .rates = dsp_fck_core_rates },
- { .parent = NULL },
-};
-
-static const char *dsp_fck_parent_names[] = {
- "core_ck",
-};
-
-static struct clk dsp_fck;
-
-static const struct clk_ops dsp_fck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_dflt_clk_enable,
- .disable = &omap2_dflt_clk_disable,
- .is_enabled = &omap2_dflt_clk_is_enabled,
- .recalc_rate = &omap2_clksel_recalc,
- .set_rate = &omap2_clksel_set_rate,
- .round_rate = &omap2_clksel_round_rate,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(dsp_fck, "dsp_clkdm", dsp_fck_clksel,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
- OMAP24XX_CLKSEL_DSP_MASK,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, &clkhwops_wait,
- dsp_fck_parent_names, dsp_fck_ops);
-
-static const struct clksel_rate dss1_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate dss1_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 5, .val = 5, .flags = RATE_IN_24XX },
- { .div = 6, .val = 6, .flags = RATE_IN_24XX },
- { .div = 8, .val = 8, .flags = RATE_IN_24XX },
- { .div = 9, .val = 9, .flags = RATE_IN_24XX },
- { .div = 12, .val = 12, .flags = RATE_IN_24XX },
- { .div = 16, .val = 16, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel dss1_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dss1_fck_sys_rates },
- { .parent = &core_ck, .rates = dss1_fck_core_rates },
- { .parent = NULL },
-};
-
-static const char *dss1_fck_parent_names[] = {
- "sys_ck", "core_ck",
-};
-
-static const struct clk_ops dss1_fck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_dflt_clk_enable,
- .disable = &omap2_dflt_clk_disable,
- .is_enabled = &omap2_dflt_clk_is_enabled,
- .recalc_rate = &omap2_clksel_recalc,
- .get_parent = &omap2_clksel_find_parent_index,
- .set_parent = &omap2_clksel_set_parent,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(dss1_fck, "dss_clkdm", dss1_fck_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_DSS1_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_DSS1_SHIFT, NULL,
- dss1_fck_parent_names, dss1_fck_ops);
-
-static const struct clksel_rate dss2_fck_sys_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate dss2_fck_48m_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate func_48m_apll96_rates[] = {
- { .div = 2, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate func_48m_alt_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel func_48m_clksel[] = {
- { .parent = &apll96_ck, .rates = func_48m_apll96_rates },
- { .parent = &alt_ck, .rates = func_48m_alt_rates },
- { .parent = NULL },
-};
-
-static const char *func_48m_ck_parent_names[] = {
- "apll96_ck", "alt_ck",
-};
-
-static struct clk func_48m_ck;
-
-static const struct clk_ops func_48m_ck_ops = {
- .init = &omap2_init_clk_clkdm,
- .recalc_rate = &omap2_clksel_recalc,
- .set_rate = &omap2_clksel_set_rate,
- .round_rate = &omap2_clksel_round_rate,
- .get_parent = &omap2_clksel_find_parent_index,
- .set_parent = &omap2_clksel_set_parent,
-};
-
-static struct clk_hw_omap func_48m_ck_hw = {
- .hw = {
- .clk = &func_48m_ck,
- },
- .clksel = func_48m_clksel,
- .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- .clksel_mask = OMAP24XX_48M_SOURCE_MASK,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(func_48m_ck, func_48m_ck_parent_names, func_48m_ck_ops);
-
-static const struct clksel dss2_fck_clksel[] = {
- { .parent = &sys_ck, .rates = dss2_fck_sys_rates },
- { .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
- { .parent = NULL },
-};
-
-static const char *dss2_fck_parent_names[] = {
- "sys_ck", "func_48m_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(dss2_fck, "dss_clkdm", dss2_fck_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_DSS2_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_DSS2_SHIFT, NULL,
- dss2_fck_parent_names, dss1_fck_ops);
-
-static const char *func_54m_ck_parent_names[] = {
- "apll54_ck", "alt_ck",
-};
-
-DEFINE_CLK_MUX(func_54m_ck, func_54m_ck_parent_names, NULL, 0x0,
- OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
- OMAP24XX_54M_SOURCE_SHIFT, OMAP24XX_54M_SOURCE_WIDTH, 0x0, NULL);
-
-static struct clk dss_54m_fck;
-
-static const char *dss_54m_fck_parent_names[] = {
- "func_54m_ck",
-};
-
-static struct clk_hw_omap dss_54m_fck_hw = {
- .hw = {
- .clk = &dss_54m_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_TV_SHIFT,
- .clkdm_name = "dss_clkdm",
-};
-
-DEFINE_STRUCT_CLK(dss_54m_fck, dss_54m_fck_parent_names, aes_ick_ops);
-
-static struct clk dss_ick;
-
-static struct clk_hw_omap dss_ick_hw = {
- .hw = {
- .clk = &dss_ick,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_DSS1_SHIFT,
- .clkdm_name = "dss_clkdm",
-};
-
-DEFINE_STRUCT_CLK(dss_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk emul_ck;
-
-static struct clk_hw_omap emul_ck_hw = {
- .hw = {
- .clk = &emul_ck,
- },
- .enable_reg = OMAP2430_PRCM_CLKEMUL_CTRL,
- .enable_bit = OMAP24XX_EMULATION_EN_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(emul_ck, dss_54m_fck_parent_names, aes_ick_ops);
-
-DEFINE_CLK_FIXED_FACTOR(func_12m_ck, "func_48m_ck", &func_48m_ck, 0x0, 1, 4);
-
-static struct clk fac_fck;
-
-static const char *fac_fck_parent_names[] = {
- "func_12m_ck",
-};
-
-static struct clk_hw_omap fac_fck_hw = {
- .hw = {
- .clk = &fac_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_FAC_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(fac_fck, fac_fck_parent_names, aes_ick_ops);
-
-static struct clk fac_ick;
-
-static struct clk_hw_omap fac_ick_hw = {
- .hw = {
- .clk = &fac_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_FAC_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(fac_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clksel gfx_fck_clksel[] = {
- { .parent = &core_l3_ck, .rates = gfx_l3_rates },
- { .parent = NULL },
-};
-
-static const char *gfx_2d_fck_parent_names[] = {
- "core_l3_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(gfx_2d_fck, "gfx_clkdm", gfx_fck_clksel,
- OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
- OMAP_CLKSEL_GFX_MASK,
- OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
- OMAP24XX_EN_2D_SHIFT, &clkhwops_wait,
- gfx_2d_fck_parent_names, dsp_fck_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gfx_3d_fck, "gfx_clkdm", gfx_fck_clksel,
- OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
- OMAP_CLKSEL_GFX_MASK,
- OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
- OMAP24XX_EN_3D_SHIFT, &clkhwops_wait,
- gfx_2d_fck_parent_names, dsp_fck_ops);
-
-static struct clk gfx_ick;
-
-static const char *gfx_ick_parent_names[] = {
- "core_l3_ck",
-};
-
-static struct clk_hw_omap gfx_ick_hw = {
- .hw = {
- .clk = &gfx_ick,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
- .enable_bit = OMAP_EN_GFX_SHIFT,
- .clkdm_name = "gfx_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gfx_ick, gfx_ick_parent_names, aes_ick_ops);
-
-static struct clk gpio5_fck;
-
-static const char *gpio5_fck_parent_names[] = {
- "func_32k_ck",
-};
-
-static struct clk_hw_omap gpio5_fck_hw = {
- .hw = {
- .clk = &gpio5_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_GPIO5_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpio5_fck, gpio5_fck_parent_names, aes_ick_ops);
-
-static struct clk gpio5_ick;
-
-static struct clk_hw_omap gpio5_ick_hw = {
- .hw = {
- .clk = &gpio5_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_GPIO5_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpio5_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk gpios_fck;
-
-static struct clk_hw_omap gpios_fck_hw = {
- .hw = {
- .clk = &gpios_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpios_fck, gpio5_fck_parent_names, aes_ick_ops);
-
-static struct clk gpios_ick;
-
-static const char *gpios_ick_parent_names[] = {
- "sys_ck",
-};
-
-static struct clk_hw_omap gpios_ick_hw = {
- .hw = {
- .clk = &gpios_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpios_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static struct clk gpmc_fck;
-
-static struct clk_hw_omap gpmc_fck_hw = {
- .hw = {
- .clk = &gpmc_fck,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
- .enable_bit = OMAP24XX_AUTO_GPMC_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpmc_fck, gfx_ick_parent_names, core_ck_ops);
-
-static const struct clksel_rate gpt_alt_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel omap24xx_gpt_clksel[] = {
- { .parent = &func_32k_ck, .rates = gpt_32k_rates },
- { .parent = &sys_ck, .rates = gpt_sys_rates },
- { .parent = &alt_ck, .rates = gpt_alt_rates },
- { .parent = NULL },
-};
-
-static const char *gpt10_fck_parent_names[] = {
- "func_32k_ck", "sys_ck", "alt_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt10_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT10_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT10_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt10_ick;
-
-static struct clk_hw_omap gpt10_ick_hw = {
- .hw = {
- .clk = &gpt10_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT10_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt10_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt11_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT11_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT11_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt11_ick;
-
-static struct clk_hw_omap gpt11_ick_hw = {
- .hw = {
- .clk = &gpt11_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT11_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt11_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt12_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT12_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT12_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt12_ick;
-
-static struct clk_hw_omap gpt12_ick_hw = {
- .hw = {
- .clk = &gpt12_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT12_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt12_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clk_ops gpt1_fck_ops = {
- .init = &omap2_init_clk_clkdm,
- .enable = &omap2_dflt_clk_enable,
- .disable = &omap2_dflt_clk_disable,
- .is_enabled = &omap2_dflt_clk_is_enabled,
- .recalc_rate = &omap2_clksel_recalc,
- .set_rate = &omap2_clksel_set_rate,
- .round_rate = &omap2_clksel_round_rate,
- .get_parent = &omap2_clksel_find_parent_index,
- .set_parent = &omap2_clksel_set_parent,
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt1_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_GPT1_MASK,
- OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
- OMAP24XX_EN_GPT1_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, gpt1_fck_ops);
-
-static struct clk gpt1_ick;
-
-static struct clk_hw_omap gpt1_ick_hw = {
- .hw = {
- .clk = &gpt1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_GPT1_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt1_ick, gpios_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt2_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT2_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT2_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt2_ick;
-
-static struct clk_hw_omap gpt2_ick_hw = {
- .hw = {
- .clk = &gpt2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt2_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt3_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT3_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT3_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt3_ick;
-
-static struct clk_hw_omap gpt3_ick_hw = {
- .hw = {
- .clk = &gpt3_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt3_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt4_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT4_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT4_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt4_ick;
-
-static struct clk_hw_omap gpt4_ick_hw = {
- .hw = {
- .clk = &gpt4_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT4_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt4_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt5_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT5_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT5_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt5_ick;
-
-static struct clk_hw_omap gpt5_ick_hw = {
- .hw = {
- .clk = &gpt5_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT5_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt5_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt6_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT6_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT6_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt6_ick;
-
-static struct clk_hw_omap gpt6_ick_hw = {
- .hw = {
- .clk = &gpt6_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT6_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt6_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt7_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT7_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT7_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt7_ick;
-
-static struct clk_hw_omap gpt7_ick_hw = {
- .hw = {
- .clk = &gpt7_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT7_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt7_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk gpt8_fck;
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt8_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT8_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT8_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt8_ick;
-
-static struct clk_hw_omap gpt8_ick_hw = {
- .hw = {
- .clk = &gpt8_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT8_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt8_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(gpt9_fck, "core_l4_clkdm", omap24xx_gpt_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
- OMAP24XX_CLKSEL_GPT9_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_GPT9_SHIFT, &clkhwops_wait,
- gpt10_fck_parent_names, dss1_fck_ops);
-
-static struct clk gpt9_ick;
-
-static struct clk_hw_omap gpt9_ick_hw = {
- .hw = {
- .clk = &gpt9_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_GPT9_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(gpt9_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk hdq_fck;
-
-static struct clk_hw_omap hdq_fck_hw = {
- .hw = {
- .clk = &hdq_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_HDQ_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(hdq_fck, fac_fck_parent_names, aes_ick_ops);
-
-static struct clk hdq_ick;
-
-static struct clk_hw_omap hdq_ick_hw = {
- .hw = {
- .clk = &hdq_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_HDQ_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(hdq_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk i2c1_ick;
-
-static struct clk_hw_omap i2c1_ick_hw = {
- .hw = {
- .clk = &i2c1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_I2C1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(i2c1_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk i2c2_ick;
-
-static struct clk_hw_omap i2c2_ick_hw = {
- .hw = {
- .clk = &i2c2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP2420_EN_I2C2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(i2c2_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk i2chs1_fck;
-
-static struct clk_hw_omap i2chs1_fck_hw = {
- .hw = {
- .clk = &i2chs1_fck,
- },
- .ops = &clkhwops_omap2430_i2chs_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_I2CHS1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(i2chs1_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk i2chs2_fck;
-
-static struct clk_hw_omap i2chs2_fck_hw = {
- .hw = {
- .clk = &i2chs2_fck,
- },
- .ops = &clkhwops_omap2430_i2chs_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_I2CHS2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(i2chs2_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk icr_ick;
-
-static struct clk_hw_omap icr_ick_hw = {
- .hw = {
- .clk = &icr_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP2430_EN_ICR_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(icr_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static const struct clksel dsp_ick_clksel[] = {
- { .parent = &dsp_fck, .rates = dsp_ick_rates },
- { .parent = NULL },
-};
-
-static const char *iva2_1_ick_parent_names[] = {
- "dsp_fck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(iva2_1_ick, "dsp_clkdm", dsp_ick_clksel,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
- OMAP24XX_CLKSEL_DSP_IF_MASK,
- OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
- OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT, &clkhwops_wait,
- iva2_1_ick_parent_names, dsp_fck_ops);
-
-static struct clk mailboxes_ick;
-
-static struct clk_hw_omap mailboxes_ick_hw = {
- .hw = {
- .clk = &mailboxes_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mailboxes_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clksel_rate common_mcbsp_96m_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel mcbsp_fck_clksel[] = {
- { .parent = &func_96m_ck, .rates = common_mcbsp_96m_rates },
- { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates },
- { .parent = NULL },
-};
-
-static const char *mcbsp1_fck_parent_names[] = {
- "func_96m_ck", "mcbsp_clks",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(mcbsp1_fck, "core_l4_clkdm", mcbsp_fck_clksel,
- OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
- OMAP2_MCBSP1_CLKS_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_MCBSP1_SHIFT, &clkhwops_wait,
- mcbsp1_fck_parent_names, dss1_fck_ops);
-
-static struct clk mcbsp1_ick;
-
-static struct clk_hw_omap mcbsp1_ick_hw = {
- .hw = {
- .clk = &mcbsp1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCBSP1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcbsp1_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(mcbsp2_fck, "core_l4_clkdm", mcbsp_fck_clksel,
- OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
- OMAP2_MCBSP2_CLKS_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- OMAP24XX_EN_MCBSP2_SHIFT, &clkhwops_wait,
- mcbsp1_fck_parent_names, dss1_fck_ops);
-
-static struct clk mcbsp2_ick;
-
-static struct clk_hw_omap mcbsp2_ick_hw = {
- .hw = {
- .clk = &mcbsp2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCBSP2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcbsp2_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(mcbsp3_fck, "core_l4_clkdm", mcbsp_fck_clksel,
- OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
- OMAP2_MCBSP3_CLKS_MASK,
- OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- OMAP2430_EN_MCBSP3_SHIFT, &clkhwops_wait,
- mcbsp1_fck_parent_names, dss1_fck_ops);
-
-static struct clk mcbsp3_ick;
-
-static struct clk_hw_omap mcbsp3_ick_hw = {
- .hw = {
- .clk = &mcbsp3_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcbsp3_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(mcbsp4_fck, "core_l4_clkdm", mcbsp_fck_clksel,
- OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
- OMAP2_MCBSP4_CLKS_MASK,
- OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- OMAP2430_EN_MCBSP4_SHIFT, &clkhwops_wait,
- mcbsp1_fck_parent_names, dss1_fck_ops);
-
-static struct clk mcbsp4_ick;
-
-static struct clk_hw_omap mcbsp4_ick_hw = {
- .hw = {
- .clk = &mcbsp4_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP4_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcbsp4_ick, aes_ick_parent_names, aes_ick_ops);
-
-DEFINE_CLK_OMAP_MUX_GATE(mcbsp5_fck, "core_l4_clkdm", mcbsp_fck_clksel,
- OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
- OMAP2_MCBSP5_CLKS_MASK,
- OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- OMAP2430_EN_MCBSP5_SHIFT, &clkhwops_wait,
- mcbsp1_fck_parent_names, dss1_fck_ops);
-
-static struct clk mcbsp5_ick;
-
-static struct clk_hw_omap mcbsp5_ick_hw = {
- .hw = {
- .clk = &mcbsp5_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCBSP5_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcbsp5_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk mcspi1_fck;
-
-static const char *mcspi1_fck_parent_names[] = {
- "func_48m_ck",
-};
-
-static struct clk_hw_omap mcspi1_fck_hw = {
- .hw = {
- .clk = &mcspi1_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi1_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk mcspi1_ick;
-
-static struct clk_hw_omap mcspi1_ick_hw = {
- .hw = {
- .clk = &mcspi1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi1_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk mcspi2_fck;
-
-static struct clk_hw_omap mcspi2_fck_hw = {
- .hw = {
- .clk = &mcspi2_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi2_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk mcspi2_ick;
-
-static struct clk_hw_omap mcspi2_ick_hw = {
- .hw = {
- .clk = &mcspi2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MCSPI2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi2_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk mcspi3_fck;
-
-static struct clk_hw_omap mcspi3_fck_hw = {
- .hw = {
- .clk = &mcspi3_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi3_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk mcspi3_ick;
-
-static struct clk_hw_omap mcspi3_ick_hw = {
- .hw = {
- .clk = &mcspi3_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MCSPI3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mcspi3_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clksel_rate mdm_ick_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_243X },
- { .div = 4, .val = 4, .flags = RATE_IN_243X },
- { .div = 6, .val = 6, .flags = RATE_IN_243X },
- { .div = 9, .val = 9, .flags = RATE_IN_243X },
- { .div = 0 }
-};
-
-static const struct clksel mdm_ick_clksel[] = {
- { .parent = &core_ck, .rates = mdm_ick_core_rates },
- { .parent = NULL },
-};
-
-static const char *mdm_ick_parent_names[] = {
- "core_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(mdm_ick, "mdm_clkdm", mdm_ick_clksel,
- OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
- OMAP2430_CLKSEL_MDM_MASK,
- OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
- OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
- &clkhwops_iclk_wait, mdm_ick_parent_names,
- dsp_fck_ops);
-
-static struct clk mdm_intc_ick;
-
-static struct clk_hw_omap mdm_intc_ick_hw = {
- .hw = {
- .clk = &mdm_intc_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MDM_INTC_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mdm_intc_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk mdm_osc_ck;
-
-static struct clk_hw_omap mdm_osc_ck_hw = {
- .hw = {
- .clk = &mdm_osc_ck,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
- .enable_bit = OMAP2430_EN_OSC_SHIFT,
- .clkdm_name = "mdm_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mdm_osc_ck, sys_ck_parent_names, aes_ick_ops);
-
-static struct clk mmchs1_fck;
-
-static struct clk_hw_omap mmchs1_fck_hw = {
- .hw = {
- .clk = &mmchs1_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mmchs1_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk mmchs1_ick;
-
-static struct clk_hw_omap mmchs1_ick_hw = {
- .hw = {
- .clk = &mmchs1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mmchs1_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk mmchs2_fck;
-
-static struct clk_hw_omap mmchs2_fck_hw = {
- .hw = {
- .clk = &mmchs2_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mmchs2_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk mmchs2_ick;
-
-static struct clk_hw_omap mmchs2_ick_hw = {
- .hw = {
- .clk = &mmchs2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_MMCHS2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mmchs2_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk mmchsdb1_fck;
-
-static struct clk_hw_omap mmchsdb1_fck_hw = {
- .hw = {
- .clk = &mmchsdb1_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHSDB1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mmchsdb1_fck, gpio5_fck_parent_names, aes_ick_ops);
-
-static struct clk mmchsdb2_fck;
-
-static struct clk_hw_omap mmchsdb2_fck_hw = {
- .hw = {
- .clk = &mmchsdb2_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP2430_EN_MMCHSDB2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mmchsdb2_fck, gpio5_fck_parent_names, aes_ick_ops);
-
-DEFINE_CLK_DIVIDER(mpu_ck, "core_ck", &core_ck, 0x0,
- OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
- OMAP24XX_CLKSEL_MPU_SHIFT, OMAP24XX_CLKSEL_MPU_WIDTH,
- CLK_DIVIDER_ONE_BASED, NULL);
-
-static struct clk mpu_wdt_fck;
-
-static struct clk_hw_omap mpu_wdt_fck_hw = {
- .hw = {
- .clk = &mpu_wdt_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
- .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mpu_wdt_fck, gpio5_fck_parent_names, aes_ick_ops);
-
-static struct clk mpu_wdt_ick;
-
-static struct clk_hw_omap mpu_wdt_ick_hw = {
- .hw = {
- .clk = &mpu_wdt_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mpu_wdt_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static struct clk mspro_fck;
-
-static struct clk_hw_omap mspro_fck_hw = {
- .hw = {
- .clk = &mspro_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mspro_fck, cam_fck_parent_names, aes_ick_ops);
-
-static struct clk mspro_ick;
-
-static struct clk_hw_omap mspro_ick_hw = {
- .hw = {
- .clk = &mspro_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_MSPRO_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(mspro_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk omapctrl_ick;
-
-static struct clk_hw_omap omapctrl_ick_hw = {
- .hw = {
- .clk = &omapctrl_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_OMAPCTRL_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(omapctrl_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static struct clk pka_ick;
-
-static struct clk_hw_omap pka_ick_hw = {
- .hw = {
- .clk = &pka_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_PKA_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(pka_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk rng_ick;
-
-static struct clk_hw_omap rng_ick_hw = {
- .hw = {
- .clk = &rng_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_RNG_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(rng_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk sdma_fck;
-
-DEFINE_STRUCT_CLK_HW_OMAP(sdma_fck, "core_l3_clkdm");
-DEFINE_STRUCT_CLK(sdma_fck, gfx_ick_parent_names, core_ck_ops);
-
-static struct clk sdma_ick;
-
-static struct clk_hw_omap sdma_ick_hw = {
- .hw = {
- .clk = &sdma_ick,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
- .enable_bit = OMAP24XX_AUTO_SDMA_SHIFT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(sdma_ick, gfx_ick_parent_names, core_ck_ops);
-
-static struct clk sdrc_ick;
-
-static struct clk_hw_omap sdrc_ick_hw = {
- .hw = {
- .clk = &sdrc_ick,
- },
- .ops = &clkhwops_iclk,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
- .enable_bit = OMAP2430_EN_SDRC_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(sdrc_ick, gfx_ick_parent_names, core_ck_ops);
-
-static struct clk sha_ick;
-
-static struct clk_hw_omap sha_ick_hw = {
- .hw = {
- .clk = &sha_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
- .enable_bit = OMAP24XX_EN_SHA_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(sha_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk ssi_l4_ick;
-
-static struct clk_hw_omap ssi_l4_ick_hw = {
- .hw = {
- .clk = &ssi_l4_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP24XX_EN_SSI_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(ssi_l4_ick, aes_ick_parent_names, aes_ick_ops);
-
-static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 5, .val = 5, .flags = RATE_IN_243X },
- { .div = 0 }
-};
-
-static const struct clksel ssi_ssr_sst_fck_clksel[] = {
- { .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
- { .parent = NULL },
-};
-
-static const char *ssi_ssr_sst_fck_parent_names[] = {
- "core_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(ssi_ssr_sst_fck, "core_l3_clkdm",
- ssi_ssr_sst_fck_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_SSI_MASK,
- OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- OMAP24XX_EN_SSI_SHIFT, &clkhwops_wait,
- ssi_ssr_sst_fck_parent_names, dsp_fck_ops);
-
-static struct clk sync_32k_ick;
-
-static struct clk_hw_omap sync_32k_ick_hw = {
- .hw = {
- .clk = &sync_32k_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_32KSYNC_SHIFT,
- .flags = ENABLE_ON_INIT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(sync_32k_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static const struct clksel_rate common_clkout_src_core_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_96m_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_54m_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel common_clkout_src_clksel[] = {
- { .parent = &core_ck, .rates = common_clkout_src_core_rates },
- { .parent = &sys_ck, .rates = common_clkout_src_sys_rates },
- { .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
- { .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
- { .parent = NULL },
-};
-
-static const char *sys_clkout_src_parent_names[] = {
- "core_ck", "sys_ck", "func_96m_ck", "func_54m_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(sys_clkout_src, "wkup_clkdm", common_clkout_src_clksel,
- OMAP2430_PRCM_CLKOUT_CTRL, OMAP24XX_CLKOUT_SOURCE_MASK,
- OMAP2430_PRCM_CLKOUT_CTRL, OMAP24XX_CLKOUT_EN_SHIFT,
- NULL, sys_clkout_src_parent_names, gpt1_fck_ops);
-
-DEFINE_CLK_DIVIDER(sys_clkout, "sys_clkout_src", &sys_clkout_src, 0x0,
- OMAP2430_PRCM_CLKOUT_CTRL, OMAP24XX_CLKOUT_DIV_SHIFT,
- OMAP24XX_CLKOUT_DIV_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
-
-static struct clk uart1_fck;
-
-static struct clk_hw_omap uart1_fck_hw = {
- .hw = {
- .clk = &uart1_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_UART1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart1_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk uart1_ick;
-
-static struct clk_hw_omap uart1_ick_hw = {
- .hw = {
- .clk = &uart1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_UART1_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart1_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk uart2_fck;
-
-static struct clk_hw_omap uart2_fck_hw = {
- .hw = {
- .clk = &uart2_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_UART2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart2_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk uart2_ick;
-
-static struct clk_hw_omap uart2_ick_hw = {
- .hw = {
- .clk = &uart2_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_UART2_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart2_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk uart3_fck;
-
-static struct clk_hw_omap uart3_fck_hw = {
- .hw = {
- .clk = &uart3_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP24XX_EN_UART3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart3_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static struct clk uart3_ick;
-
-static struct clk_hw_omap uart3_ick_hw = {
- .hw = {
- .clk = &uart3_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP24XX_EN_UART3_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(uart3_ick, aes_ick_parent_names, aes_ick_ops);
-
-static struct clk usb_fck;
-
-static struct clk_hw_omap usb_fck_hw = {
- .hw = {
- .clk = &usb_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
- .enable_bit = OMAP24XX_EN_USB_SHIFT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(usb_fck, mcspi1_fck_parent_names, aes_ick_ops);
-
-static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 4, .val = 4, .flags = RATE_IN_24XX },
- { .div = 0 }
-};
-
-static const struct clksel usb_l4_ick_clksel[] = {
- { .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
- { .parent = NULL },
-};
-
-static const char *usb_l4_ick_parent_names[] = {
- "core_l3_ck",
-};
-
-DEFINE_CLK_OMAP_MUX_GATE(usb_l4_ick, "core_l4_clkdm", usb_l4_ick_clksel,
- OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
- OMAP24XX_CLKSEL_USB_MASK,
- OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- OMAP24XX_EN_USB_SHIFT, &clkhwops_iclk_wait,
- usb_l4_ick_parent_names, dsp_fck_ops);
-
-static struct clk usbhs_ick;
-
-static struct clk_hw_omap usbhs_ick_hw = {
- .hw = {
- .clk = &usbhs_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
- .enable_bit = OMAP2430_EN_USBHS_SHIFT,
- .clkdm_name = "core_l3_clkdm",
-};
-
-DEFINE_STRUCT_CLK(usbhs_ick, gfx_ick_parent_names, aes_ick_ops);
-
-static struct clk virt_prcm_set;
-
-static const char *virt_prcm_set_parent_names[] = {
- "mpu_ck",
-};
-
-static const struct clk_ops virt_prcm_set_ops = {
- .recalc_rate = &omap2_table_mpu_recalc,
- .set_rate = &omap2_select_table_rate,
- .round_rate = &omap2_round_to_table_rate,
-};
-
-DEFINE_STRUCT_CLK_HW_OMAP(virt_prcm_set, NULL);
-DEFINE_STRUCT_CLK(virt_prcm_set, virt_prcm_set_parent_names, virt_prcm_set_ops);
-
-static struct clk wdt1_ick;
-
-static struct clk_hw_omap wdt1_ick_hw = {
- .hw = {
- .clk = &wdt1_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
- .enable_bit = OMAP24XX_EN_WDT1_SHIFT,
- .clkdm_name = "wkup_clkdm",
-};
-
-DEFINE_STRUCT_CLK(wdt1_ick, gpios_ick_parent_names, aes_ick_ops);
-
-static struct clk wdt4_fck;
-
-static struct clk_hw_omap wdt4_fck_hw = {
- .hw = {
- .clk = &wdt4_fck,
- },
- .ops = &clkhwops_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
- .enable_bit = OMAP24XX_EN_WDT4_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(wdt4_fck, gpio5_fck_parent_names, aes_ick_ops);
-
-static struct clk wdt4_ick;
-
-static struct clk_hw_omap wdt4_ick_hw = {
- .hw = {
- .clk = &wdt4_ick,
- },
- .ops = &clkhwops_iclk_wait,
- .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
- .enable_bit = OMAP24XX_EN_WDT4_SHIFT,
- .clkdm_name = "core_l4_clkdm",
-};
-
-DEFINE_STRUCT_CLK(wdt4_ick, aes_ick_parent_names, aes_ick_ops);
-
-/*
- * clkdev integration
- */
-
-static struct omap_clk omap2430_clks[] = {
- /* external root sources */
- CLK(NULL, "func_32k_ck", &func_32k_ck),
- CLK(NULL, "secure_32k_ck", &secure_32k_ck),
- CLK(NULL, "osc_ck", &osc_ck),
- CLK("twl", "fck", &osc_ck),
- CLK(NULL, "sys_ck", &sys_ck),
- CLK(NULL, "alt_ck", &alt_ck),
- CLK(NULL, "mcbsp_clks", &mcbsp_clks),
- /* internal analog sources */
- CLK(NULL, "dpll_ck", &dpll_ck),
- CLK(NULL, "apll96_ck", &apll96_ck),
- CLK(NULL, "apll54_ck", &apll54_ck),
- /* internal prcm root sources */
- CLK(NULL, "func_54m_ck", &func_54m_ck),
- CLK(NULL, "core_ck", &core_ck),
- CLK(NULL, "func_96m_ck", &func_96m_ck),
- CLK(NULL, "func_48m_ck", &func_48m_ck),
- CLK(NULL, "func_12m_ck", &func_12m_ck),
- CLK(NULL, "sys_clkout_src", &sys_clkout_src),
- CLK(NULL, "sys_clkout", &sys_clkout),
- CLK(NULL, "emul_ck", &emul_ck),
- /* mpu domain clocks */
- CLK(NULL, "mpu_ck", &mpu_ck),
- /* dsp domain clocks */
- CLK(NULL, "dsp_fck", &dsp_fck),
- CLK(NULL, "iva2_1_ick", &iva2_1_ick),
- /* GFX domain clocks */
- CLK(NULL, "gfx_3d_fck", &gfx_3d_fck),
- CLK(NULL, "gfx_2d_fck", &gfx_2d_fck),
- CLK(NULL, "gfx_ick", &gfx_ick),
- /* Modem domain clocks */
- CLK(NULL, "mdm_ick", &mdm_ick),
- CLK(NULL, "mdm_osc_ck", &mdm_osc_ck),
- /* DSS domain clocks */
- CLK("omapdss_dss", "ick", &dss_ick),
- CLK(NULL, "dss_ick", &dss_ick),
- CLK(NULL, "dss1_fck", &dss1_fck),
- CLK(NULL, "dss2_fck", &dss2_fck),
- CLK(NULL, "dss_54m_fck", &dss_54m_fck),
- /* L3 domain clocks */
- CLK(NULL, "core_l3_ck", &core_l3_ck),
- CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck),
- CLK(NULL, "usb_l4_ick", &usb_l4_ick),
- /* L4 domain clocks */
- CLK(NULL, "l4_ck", &l4_ck),
- CLK(NULL, "ssi_l4_ick", &ssi_l4_ick),
- /* virtual meta-group clock */
- CLK(NULL, "virt_prcm_set", &virt_prcm_set),
- /* general l4 interface ck, multi-parent functional clk */
- CLK(NULL, "gpt1_ick", &gpt1_ick),
- CLK(NULL, "gpt1_fck", &gpt1_fck),
- CLK(NULL, "gpt2_ick", &gpt2_ick),
- CLK(NULL, "gpt2_fck", &gpt2_fck),
- CLK(NULL, "gpt3_ick", &gpt3_ick),
- CLK(NULL, "gpt3_fck", &gpt3_fck),
- CLK(NULL, "gpt4_ick", &gpt4_ick),
- CLK(NULL, "gpt4_fck", &gpt4_fck),
- CLK(NULL, "gpt5_ick", &gpt5_ick),
- CLK(NULL, "gpt5_fck", &gpt5_fck),
- CLK(NULL, "gpt6_ick", &gpt6_ick),
- CLK(NULL, "gpt6_fck", &gpt6_fck),
- CLK(NULL, "gpt7_ick", &gpt7_ick),
- CLK(NULL, "gpt7_fck", &gpt7_fck),
- CLK(NULL, "gpt8_ick", &gpt8_ick),
- CLK(NULL, "gpt8_fck", &gpt8_fck),
- CLK(NULL, "gpt9_ick", &gpt9_ick),
- CLK(NULL, "gpt9_fck", &gpt9_fck),
- CLK(NULL, "gpt10_ick", &gpt10_ick),
- CLK(NULL, "gpt10_fck", &gpt10_fck),
- CLK(NULL, "gpt11_ick", &gpt11_ick),
- CLK(NULL, "gpt11_fck", &gpt11_fck),
- CLK(NULL, "gpt12_ick", &gpt12_ick),
- CLK(NULL, "gpt12_fck", &gpt12_fck),
- CLK("omap-mcbsp.1", "ick", &mcbsp1_ick),
- CLK(NULL, "mcbsp1_ick", &mcbsp1_ick),
- CLK(NULL, "mcbsp1_fck", &mcbsp1_fck),
- CLK("omap-mcbsp.2", "ick", &mcbsp2_ick),
- CLK(NULL, "mcbsp2_ick", &mcbsp2_ick),
- CLK(NULL, "mcbsp2_fck", &mcbsp2_fck),
- CLK("omap-mcbsp.3", "ick", &mcbsp3_ick),
- CLK(NULL, "mcbsp3_ick", &mcbsp3_ick),
- CLK(NULL, "mcbsp3_fck", &mcbsp3_fck),
- CLK("omap-mcbsp.4", "ick", &mcbsp4_ick),
- CLK(NULL, "mcbsp4_ick", &mcbsp4_ick),
- CLK(NULL, "mcbsp4_fck", &mcbsp4_fck),
- CLK("omap-mcbsp.5", "ick", &mcbsp5_ick),
- CLK(NULL, "mcbsp5_ick", &mcbsp5_ick),
- CLK(NULL, "mcbsp5_fck", &mcbsp5_fck),
- CLK("omap2_mcspi.1", "ick", &mcspi1_ick),
- CLK(NULL, "mcspi1_ick", &mcspi1_ick),
- CLK(NULL, "mcspi1_fck", &mcspi1_fck),
- CLK("omap2_mcspi.2", "ick", &mcspi2_ick),
- CLK(NULL, "mcspi2_ick", &mcspi2_ick),
- CLK(NULL, "mcspi2_fck", &mcspi2_fck),
- CLK("omap2_mcspi.3", "ick", &mcspi3_ick),
- CLK(NULL, "mcspi3_ick", &mcspi3_ick),
- CLK(NULL, "mcspi3_fck", &mcspi3_fck),
- CLK(NULL, "uart1_ick", &uart1_ick),
- CLK(NULL, "uart1_fck", &uart1_fck),
- CLK(NULL, "uart2_ick", &uart2_ick),
- CLK(NULL, "uart2_fck", &uart2_fck),
- CLK(NULL, "uart3_ick", &uart3_ick),
- CLK(NULL, "uart3_fck", &uart3_fck),
- CLK(NULL, "gpios_ick", &gpios_ick),
- CLK(NULL, "gpios_fck", &gpios_fck),
- CLK("omap_wdt", "ick", &mpu_wdt_ick),
- CLK(NULL, "mpu_wdt_ick", &mpu_wdt_ick),
- CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck),
- CLK(NULL, "sync_32k_ick", &sync_32k_ick),
- CLK(NULL, "wdt1_ick", &wdt1_ick),
- CLK(NULL, "omapctrl_ick", &omapctrl_ick),
- CLK(NULL, "icr_ick", &icr_ick),
- CLK("omap24xxcam", "fck", &cam_fck),
- CLK(NULL, "cam_fck", &cam_fck),
- CLK("omap24xxcam", "ick", &cam_ick),
- CLK(NULL, "cam_ick", &cam_ick),
- CLK(NULL, "mailboxes_ick", &mailboxes_ick),
- CLK(NULL, "wdt4_ick", &wdt4_ick),
- CLK(NULL, "wdt4_fck", &wdt4_fck),
- CLK(NULL, "mspro_ick", &mspro_ick),
- CLK(NULL, "mspro_fck", &mspro_fck),
- CLK(NULL, "fac_ick", &fac_ick),
- CLK(NULL, "fac_fck", &fac_fck),
- CLK("omap_hdq.0", "ick", &hdq_ick),
- CLK(NULL, "hdq_ick", &hdq_ick),
- CLK("omap_hdq.1", "fck", &hdq_fck),
- CLK(NULL, "hdq_fck", &hdq_fck),
- CLK("omap_i2c.1", "ick", &i2c1_ick),
- CLK(NULL, "i2c1_ick", &i2c1_ick),
- CLK(NULL, "i2chs1_fck", &i2chs1_fck),
- CLK("omap_i2c.2", "ick", &i2c2_ick),
- CLK(NULL, "i2c2_ick", &i2c2_ick),
- CLK(NULL, "i2chs2_fck", &i2chs2_fck),
- CLK(NULL, "gpmc_fck", &gpmc_fck),
- CLK(NULL, "sdma_fck", &sdma_fck),
- CLK(NULL, "sdma_ick", &sdma_ick),
- CLK(NULL, "sdrc_ick", &sdrc_ick),
- CLK(NULL, "des_ick", &des_ick),
- CLK("omap-sham", "ick", &sha_ick),
- CLK(NULL, "sha_ick", &sha_ick),
- CLK("omap_rng", "ick", &rng_ick),
- CLK(NULL, "rng_ick", &rng_ick),
- CLK("omap-aes", "ick", &aes_ick),
- CLK(NULL, "aes_ick", &aes_ick),
- CLK(NULL, "pka_ick", &pka_ick),
- CLK(NULL, "usb_fck", &usb_fck),
- CLK("musb-omap2430", "ick", &usbhs_ick),
- CLK(NULL, "usbhs_ick", &usbhs_ick),
- CLK("omap_hsmmc.0", "ick", &mmchs1_ick),
- CLK(NULL, "mmchs1_ick", &mmchs1_ick),
- CLK(NULL, "mmchs1_fck", &mmchs1_fck),
- CLK("omap_hsmmc.1", "ick", &mmchs2_ick),
- CLK(NULL, "mmchs2_ick", &mmchs2_ick),
- CLK(NULL, "mmchs2_fck", &mmchs2_fck),
- CLK(NULL, "gpio5_ick", &gpio5_ick),
- CLK(NULL, "gpio5_fck", &gpio5_fck),
- CLK(NULL, "mdm_intc_ick", &mdm_intc_ick),
- CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck),
- CLK(NULL, "mmchsdb1_fck", &mmchsdb1_fck),
- CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck),
- CLK(NULL, "mmchsdb2_fck", &mmchsdb2_fck),
- CLK(NULL, "timer_32k_ck", &func_32k_ck),
- CLK(NULL, "timer_sys_ck", &sys_ck),
- CLK(NULL, "timer_ext_ck", &alt_ck),
- CLK(NULL, "cpufreq_ck", &virt_prcm_set),
-};
-
-static const char *enable_init_clks[] = {
- "apll96_ck",
- "apll54_ck",
- "sync_32k_ick",
- "omapctrl_ick",
- "gpmc_fck",
- "sdrc_ick",
-};
-
-/*
- * init code
- */
-
-int __init omap2430_clk_init(void)
-{
- prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
- cpu_mask = RATE_IN_243X;
- rate_table = omap2430_rate_table;
-
- omap2xxx_clkt_dpllcore_init(&dpll_ck_hw.hw);
-
- omap2xxx_clkt_vps_check_bootloader_rates();
-
- omap_clocks_register(omap2430_clks, ARRAY_SIZE(omap2430_clks));
-
- omap2xxx_clkt_vps_late_init();
-
- omap2_clk_disable_autoidle_all();
-
- omap2_clk_enable_init_clocks(enable_init_clks,
- ARRAY_SIZE(enable_init_clks));
-
- pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n",
- (clk_get_rate(&sys_ck) / 1000000),
- (clk_get_rate(&sys_ck) / 100000) % 10,
- (clk_get_rate(&dpll_ck) / 1000000),
- (clk_get_rate(&mpu_ck) / 1000000));
-
- return 0;
-}
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
deleted file mode 100644
index 0717dff..0000000
--- a/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * OMAP2xxx osc_clk-specific clock code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-
-/*
- * XXX This does not actually enable the osc_ck, since the osc_ck must
- * be running for this function to be called. Instead, this function
- * is used to disable an autoidle mode on the osc_ck. The existing
- * clk_enable/clk_disable()-based usecounting for osc_ck should be
- * replaced with autoidle-based usecounting.
- */
-int omap2_enable_osc_ck(struct clk_hw *clk)
-{
- u32 pcc;
-
- pcc = readl_relaxed(prcm_clksrc_ctrl);
-
- writel_relaxed(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-
- return 0;
-}
-
-/*
- * XXX This does not actually disable the osc_ck, since doing so would
- * immediately halt the system. Instead, this function is used to
- * enable an autoidle mode on the osc_ck. The existing
- * clk_enable/clk_disable()-based usecounting for osc_ck should be
- * replaced with autoidle-based usecounting.
- */
-void omap2_disable_osc_ck(struct clk_hw *clk)
-{
- u32 pcc;
-
- pcc = readl_relaxed(prcm_clksrc_ctrl);
-
- writel_relaxed(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-}
-
-unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
- unsigned long parent_rate)
-{
- return omap2xxx_get_apll_clkin() * omap2xxx_get_sysclkdiv();
-}
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
deleted file mode 100644
index 58dd3a9..0000000
--- a/arch/arm/mach-omap2/clkt2xxx_sys.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * OMAP2xxx sys_clk-specific clock code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-
-void __iomem *prcm_clksrc_ctrl;
-
-u32 omap2xxx_get_sysclkdiv(void)
-{
- u32 div;
-
- div = readl_relaxed(prcm_clksrc_ctrl);
- div &= OMAP_SYSCLKDIV_MASK;
- div >>= OMAP_SYSCLKDIV_SHIFT;
-
- return div;
-}
-
-unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk,
- unsigned long parent_rate)
-{
- return parent_rate / omap2xxx_get_sysclkdiv();
-}
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 591581a..4ac6e3d 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -82,27 +82,6 @@
}
/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *oclk;
-
- if (!hw) {
- pr_warn("%s: hw is NULL\n", __func__);
- return -EINVAL;
- }
-
- oclk = to_clk_hw_omap(hw);
-
- WARN_ON(!oclk->fixed_div);
-
- return parent_rate / oclk->fixed_div;
-}
-
-/*
* OMAP2+ specific clock functions
*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 12f54d4..bb67238 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -178,9 +178,6 @@
const struct clksel_rate *rates;
};
-unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
#define CORE_CLK_SRC_DPLL 0x1
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
index 45f41a4..a090225 100644
--- a/arch/arm/mach-omap2/clock2xxx.h
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -45,8 +45,6 @@
#define omap2430_clk_init() do { } while(0)
#endif
-extern void __iomem *prcm_clksrc_ctrl;
-
extern struct clk_hw *dclk_hw;
int omap2_enable_osc_ck(struct clk_hw *hw);
void omap2_disable_osc_ck(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 8538669..d7a5d11 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -107,6 +107,7 @@
#define OMAP24XX_AUTO_DPLL_SHIFT 0
#define OMAP24XX_AUTO_DPLL_MASK (0x3 << 0)
#define OMAP24XX_APLLS_CLKIN_SHIFT 23
+#define OMAP24XX_APLLS_CLKIN_WIDTH 3
#define OMAP24XX_APLLS_CLKIN_MASK (0x7 << 23)
#define OMAP24XX_DPLL_MULT_MASK (0x3ff << 12)
#define OMAP24XX_DPLL_DIV_MASK (0xf << 8)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 8f55945..1271fe9 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -53,6 +53,7 @@
#include "prm2xxx.h"
#include "prm3xxx.h"
#include "prm44xx.h"
+#include "opp2xxx.h"
/*
* omap_clk_soc_init: points to a function that does the SoC-specific
@@ -410,7 +411,8 @@
omap242x_clockdomains_init();
omap2420_hwmod_init();
omap_hwmod_init_postsetup();
- omap_clk_soc_init = omap2420_clk_init;
+ omap_clk_soc_init = omap2420_dt_clk_init;
+ rate_table = omap2420_rate_table;
}
void __init omap2420_init_late(void)
@@ -439,7 +441,8 @@
omap243x_clockdomains_init();
omap2430_hwmod_init();
omap_hwmod_init_postsetup();
- omap_clk_soc_init = omap2430_clk_init;
+ omap_clk_soc_init = omap2430_dt_clk_init;
+ rate_table = omap2430_rate_table;
}
void __init omap2430_init_late(void)
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index a5ea988..d7ac05c 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -249,6 +249,10 @@
/* Enable wake-up events */
omap2_prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
WKUP_MOD, PM_WKEN);
+
+ /* Enable SYS_CLKEN control when all domains idle */
+ omap2_prm_set_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
}
int __init omap2_pm_init(void)
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 25e8b82..76ca320 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -472,6 +472,8 @@
{ .compatible = "ti,am3-scrm" },
{ .compatible = "ti,am4-prcm" },
{ .compatible = "ti,am4-scrm" },
+ { .compatible = "ti,omap2-prcm" },
+ { .compatible = "ti,omap2-scrm" },
{ .compatible = "ti,omap3-prm" },
{ .compatible = "ti,omap3-cm" },
{ .compatible = "ti,omap3-scrm" },
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 1caee6d..d168669 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -2,9 +2,11 @@
bool "Rockchip RK2928 and RK3xxx SOCs" if ARCH_MULTI_V7
select PINCTRL
select PINCTRL_ROCKCHIP
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
select CACHE_L2X0
+ select HAVE_ARM_ARCH_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select DW_APB_TIMER_OF
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 968cc34..8ab9e0e 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -29,6 +29,7 @@
"rockchip,rk3066a",
"rockchip,rk3066b",
"rockchip,rk3188",
+ "rockchip,rk3288",
NULL,
};
diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c
index b5bc22c..1d2fe05 100644
--- a/arch/arm/mach-shmobile/clock-r8a73a4.c
+++ b/arch/arm/mach-shmobile/clock-r8a73a4.c
@@ -574,11 +574,17 @@
/* MSTP */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("e6c20000.serial", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("e6c30000.serial", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
+ CLKDEV_DEV_ID("e6ce0000.serial", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
+ CLKDEV_DEV_ID("e6cf0000.serial", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("e6700020.dma-controller", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 50931e3..68592b7 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -555,27 +555,27 @@
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
- CLKDEV_DEV_ID("e6c80000.sci", &mstp_clks[MSTP200]),
+ CLKDEV_DEV_ID("e6c80000.serial", &mstp_clks[MSTP200]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]),
- CLKDEV_DEV_ID("e6c70000.sci", &mstp_clks[MSTP201]),
+ CLKDEV_DEV_ID("e6c70000.serial", &mstp_clks[MSTP201]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]),
- CLKDEV_DEV_ID("e6c60000.sci", &mstp_clks[MSTP202]),
+ CLKDEV_DEV_ID("e6c60000.serial", &mstp_clks[MSTP202]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
- CLKDEV_DEV_ID("e6c50000.sci", &mstp_clks[MSTP203]),
+ CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
- CLKDEV_DEV_ID("e6c40000.sci", &mstp_clks[MSTP204]),
+ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]),
- CLKDEV_DEV_ID("e6c30000.sci", &mstp_clks[MSTP206]),
+ CLKDEV_DEV_ID("e6c30000.serial", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
- CLKDEV_DEV_ID("e6cb0000.sci", &mstp_clks[MSTP207]),
+ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]),
CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
- CLKDEV_DEV_ID("e6cd0000.sci", &mstp_clks[MSTP222]),
+ CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
- CLKDEV_DEV_ID("e6cc0000.sci", &mstp_clks[MSTP230]),
+ CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP230]),
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]),
CLKDEV_DEV_ID("fe1f0000.sound", &mstp_clks[MSTP328]),
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
index 13f8f3a..a6dd601 100644
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ b/arch/arm/mach-shmobile/clock-r8a7778.c
@@ -202,11 +202,17 @@
CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
+ CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
+ CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
+ CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
+ CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
+ CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
+ CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 0d9cd1f..4990e03 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -638,16 +638,25 @@
CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+ CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP219]), /* SCIFA7 */
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* MP-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
+ CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+ CLKDEV_DEV_ID("e6c50000.serial", &mstp_clks[MSTP203]), /* SCIFA1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+ CLKDEV_DEV_ID("e6c60000.serial", &mstp_clks[MSTP202]), /* SCIFA2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+ CLKDEV_DEV_ID("e6c70000.serial", &mstp_clks[MSTP201]), /* SCIFA3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+ CLKDEV_DEV_ID("e6c80000.serial", &mstp_clks[MSTP200]), /* SCIFA4 */
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
+ CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP331]), /* SCIFA6 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 9333770..e84b6a5 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -187,12 +187,6 @@
void __init r8a73a4_add_dt_devices(void)
{
- r8a73a4_register_scif(0);
- r8a73a4_register_scif(1);
- r8a73a4_register_scif(2);
- r8a73a4_register_scif(3);
- r8a73a4_register_scif(4);
- r8a73a4_register_scif(5);
r8a7790_register_cmt(1);
}
@@ -287,6 +281,12 @@
void __init r8a73a4_add_standard_devices(void)
{
r8a73a4_add_dt_devices();
+ r8a73a4_register_scif(0);
+ r8a73a4_register_scif(1);
+ r8a73a4_register_scif(2);
+ r8a73a4_register_scif(3);
+ r8a73a4_register_scif(4);
+ r8a73a4_register_scif(5);
r8a73a4_register_irqc(0);
r8a73a4_register_irqc(1);
r8a73a4_register_thermal();
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 35dec23..d0f51f1 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -310,6 +310,10 @@
};
static struct platform_device *r8a7740_devices_dt[] __initdata = {
+ &cmt1_device,
+};
+
+static struct platform_device *r8a7740_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
&scif2_device,
@@ -319,10 +323,6 @@
&scif6_device,
&scif7_device,
&scif8_device,
- &cmt1_device,
-};
-
-static struct platform_device *r8a7740_early_devices[] __initdata = {
&irqpin0_device,
&irqpin1_device,
&irqpin2_device,
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index d311ef9..3d5a5ae 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -292,12 +292,6 @@
}
#endif
- r8a7778_register_scif(0);
- r8a7778_register_scif(1);
- r8a7778_register_scif(2);
- r8a7778_register_scif(3);
- r8a7778_register_scif(4);
- r8a7778_register_scif(5);
r8a7778_register_tmu(0);
}
@@ -506,6 +500,12 @@
void __init r8a7778_add_standard_devices(void)
{
r8a7778_add_dt_devices();
+ r8a7778_register_scif(0);
+ r8a7778_register_scif(1);
+ r8a7778_register_scif(2);
+ r8a7778_register_scif(3);
+ r8a7778_register_scif(4);
+ r8a7778_register_scif(5);
r8a7778_register_i2c(0);
r8a7778_register_i2c(1);
r8a7778_register_i2c(2);
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index ad00724..2e1e289 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -696,6 +696,10 @@
};
static struct platform_device *sh73a0_devices_dt[] __initdata = {
+ &cmt1_device,
+};
+
+static struct platform_device *sh73a0_early_devices[] __initdata = {
&scif0_device,
&scif1_device,
&scif2_device,
@@ -705,10 +709,6 @@
&scif6_device,
&scif7_device,
&scif8_device,
- &cmt1_device,
-};
-
-static struct platform_device *sh73a0_early_devices[] __initdata = {
&tmu0_device,
&ipmmu_device,
};
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 68bc0b8..942efdc 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -59,29 +59,37 @@
void __init shmobile_init_delay(void)
{
- struct device_node *np, *parent;
- u32 max_freq, freq;
+ struct device_node *np, *cpus;
+ bool is_a8_a9 = false;
+ bool is_a15 = false;
+ u32 max_freq = 0;
- max_freq = 0;
+ cpus = of_find_node_by_path("/cpus");
+ if (!cpus)
+ return;
- parent = of_find_node_by_path("/cpus");
- if (parent) {
- for_each_child_of_node(parent, np) {
- if (!of_property_read_u32(np, "clock-frequency", &freq))
- max_freq = max(max_freq, freq);
- }
- of_node_put(parent);
+ for_each_child_of_node(cpus, np) {
+ u32 freq;
+
+ if (!of_property_read_u32(np, "clock-frequency", &freq))
+ max_freq = max(max_freq, freq);
+
+ if (of_device_is_compatible(np, "arm,cortex-a8") ||
+ of_device_is_compatible(np, "arm,cortex-a9"))
+ is_a8_a9 = true;
+ else if (of_device_is_compatible(np, "arm,cortex-a15"))
+ is_a15 = true;
}
- if (max_freq) {
- if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8"))
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15"))
- if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
- shmobile_setup_delay_hz(max_freq, 2, 4);
- }
+ of_node_put(cpus);
+
+ if (!max_freq)
+ return;
+
+ if (is_a8_a9)
+ shmobile_setup_delay_hz(max_freq, 1, 3);
+ else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+ shmobile_setup_delay_hz(max_freq, 2, 4);
}
static void __init shmobile_late_time_init(void)
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 6fbfbb7..c303b55 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -2,24 +2,20 @@
obj-y += io.o
obj-y += irq.o
-obj-y += fuse.o
obj-y += pmc.o
obj-y += flowctrl.o
obj-y += powergate.o
-obj-y += apbio.o
obj-y += pm.o
obj-y += reset.o
obj-y += reset-handler.o
obj-y += sleep.o
obj-y += tegra.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o
ifeq ($(CONFIG_CPU_IDLE),y)
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o
endif
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
@@ -28,7 +24,6 @@
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o
ifeq ($(CONFIG_CPU_IDLE),y)
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
deleted file mode 100644
index bc47197..0000000
--- a/arch/arm/mach-tegra/apbio.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2010 NVIDIA Corporation.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/sched.h>
-#include <linux/mutex.h>
-
-#include "apbio.h"
-#include "iomap.h"
-
-#if defined(CONFIG_TEGRA20_APB_DMA)
-static DEFINE_MUTEX(tegra_apb_dma_lock);
-static u32 *tegra_apb_bb;
-static dma_addr_t tegra_apb_bb_phys;
-static DECLARE_COMPLETION(tegra_apb_wait);
-
-static u32 tegra_apb_readl_direct(unsigned long offset);
-static void tegra_apb_writel_direct(u32 value, unsigned long offset);
-
-static struct dma_chan *tegra_apb_dma_chan;
-static struct dma_slave_config dma_sconfig;
-
-static bool tegra_apb_dma_init(void)
-{
- dma_cap_mask_t mask;
-
- mutex_lock(&tegra_apb_dma_lock);
-
- /* Check to see if we raced to setup */
- if (tegra_apb_dma_chan)
- goto skip_init;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- tegra_apb_dma_chan = dma_request_channel(mask, NULL, NULL);
- if (!tegra_apb_dma_chan) {
- /*
- * This is common until the device is probed, so don't
- * shout about it.
- */
- pr_debug("%s: can not allocate dma channel\n", __func__);
- goto err_dma_alloc;
- }
-
- tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
- &tegra_apb_bb_phys, GFP_KERNEL);
- if (!tegra_apb_bb) {
- pr_err("%s: can not allocate bounce buffer\n", __func__);
- goto err_buff_alloc;
- }
-
- dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- dma_sconfig.src_maxburst = 1;
- dma_sconfig.dst_maxburst = 1;
-
-skip_init:
- mutex_unlock(&tegra_apb_dma_lock);
- return true;
-
-err_buff_alloc:
- dma_release_channel(tegra_apb_dma_chan);
- tegra_apb_dma_chan = NULL;
-
-err_dma_alloc:
- mutex_unlock(&tegra_apb_dma_lock);
- return false;
-}
-
-static void apb_dma_complete(void *args)
-{
- complete(&tegra_apb_wait);
-}
-
-static int do_dma_transfer(unsigned long apb_add,
- enum dma_transfer_direction dir)
-{
- struct dma_async_tx_descriptor *dma_desc;
- int ret;
-
- if (dir == DMA_DEV_TO_MEM)
- dma_sconfig.src_addr = apb_add;
- else
- dma_sconfig.dst_addr = apb_add;
-
- ret = dmaengine_slave_config(tegra_apb_dma_chan, &dma_sconfig);
- if (ret)
- return ret;
-
- dma_desc = dmaengine_prep_slave_single(tegra_apb_dma_chan,
- tegra_apb_bb_phys, sizeof(u32), dir,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!dma_desc)
- return -EINVAL;
-
- dma_desc->callback = apb_dma_complete;
- dma_desc->callback_param = NULL;
-
- reinit_completion(&tegra_apb_wait);
-
- dmaengine_submit(dma_desc);
- dma_async_issue_pending(tegra_apb_dma_chan);
- ret = wait_for_completion_timeout(&tegra_apb_wait,
- msecs_to_jiffies(50));
-
- if (WARN(ret == 0, "apb read dma timed out")) {
- dmaengine_terminate_all(tegra_apb_dma_chan);
- return -EFAULT;
- }
- return 0;
-}
-
-static u32 tegra_apb_readl_using_dma(unsigned long offset)
-{
- int ret;
-
- if (!tegra_apb_dma_chan && !tegra_apb_dma_init())
- return tegra_apb_readl_direct(offset);
-
- mutex_lock(&tegra_apb_dma_lock);
- ret = do_dma_transfer(offset, DMA_DEV_TO_MEM);
- if (ret < 0) {
- pr_err("error in reading offset 0x%08lx using dma\n", offset);
- *(u32 *)tegra_apb_bb = 0;
- }
- mutex_unlock(&tegra_apb_dma_lock);
- return *((u32 *)tegra_apb_bb);
-}
-
-static void tegra_apb_writel_using_dma(u32 value, unsigned long offset)
-{
- int ret;
-
- if (!tegra_apb_dma_chan && !tegra_apb_dma_init()) {
- tegra_apb_writel_direct(value, offset);
- return;
- }
-
- mutex_lock(&tegra_apb_dma_lock);
- *((u32 *)tegra_apb_bb) = value;
- ret = do_dma_transfer(offset, DMA_MEM_TO_DEV);
- if (ret < 0)
- pr_err("error in writing offset 0x%08lx using dma\n", offset);
- mutex_unlock(&tegra_apb_dma_lock);
-}
-#else
-#define tegra_apb_readl_using_dma tegra_apb_readl_direct
-#define tegra_apb_writel_using_dma tegra_apb_writel_direct
-#endif
-
-typedef u32 (*apbio_read_fptr)(unsigned long offset);
-typedef void (*apbio_write_fptr)(u32 value, unsigned long offset);
-
-static apbio_read_fptr apbio_read;
-static apbio_write_fptr apbio_write;
-
-static u32 tegra_apb_readl_direct(unsigned long offset)
-{
- return readl(IO_ADDRESS(offset));
-}
-
-static void tegra_apb_writel_direct(u32 value, unsigned long offset)
-{
- writel(value, IO_ADDRESS(offset));
-}
-
-void tegra_apb_io_init(void)
-{
- /* Need to use dma only when it is Tegra20 based platform */
- if (of_machine_is_compatible("nvidia,tegra20") ||
- !of_have_populated_dt()) {
- apbio_read = tegra_apb_readl_using_dma;
- apbio_write = tegra_apb_writel_using_dma;
- } else {
- apbio_read = tegra_apb_readl_direct;
- apbio_write = tegra_apb_writel_direct;
- }
-}
-
-u32 tegra_apb_readl(unsigned long offset)
-{
- return apbio_read(offset);
-}
-
-void tegra_apb_writel(u32 value, unsigned long offset)
-{
- apbio_write(value, offset);
-}
diff --git a/arch/arm/mach-tegra/apbio.h b/arch/arm/mach-tegra/apbio.h
deleted file mode 100644
index f05d71c..0000000
--- a/arch/arm/mach-tegra/apbio.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2010 NVIDIA Corporation.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_APBIO_H
-#define __MACH_TEGRA_APBIO_H
-
-void tegra_apb_io_init(void);
-u32 tegra_apb_readl(unsigned long offset);
-void tegra_apb_writel(u32 value, unsigned long offset);
-#endif
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 9c6029b..bb4782a 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -17,9 +17,10 @@
*
*/
-#include <linux/platform_device.h>
#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
#include <linux/rfkill-gpio.h>
+
#include "board.h"
static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index b5fb7c1..e3ebdce 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -14,16 +14,16 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <asm/firmware.h>
+#include <linux/clockchips.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
-#include <linux/clockchips.h>
-#include <asm/firmware.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/cpuidle.h>
-#include <asm/suspend.h>
#include <asm/smp_plat.h>
+#include <asm/suspend.h>
#include "pm.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
index b82dcae..b30bf5c 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra20.c
@@ -19,23 +19,23 @@
* more details.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/clk/tegra.h>
+#include <linux/clockchips.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
-#include <linux/clockchips.h>
-#include <linux/clk/tegra.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
-#include <asm/suspend.h>
#include <asm/smp_plat.h>
+#include <asm/suspend.h>
-#include "pm.h"
-#include "sleep.h"
+#include "flowctrl.h"
#include "iomap.h"
#include "irq.h"
-#include "flowctrl.h"
+#include "pm.h"
+#include "sleep.h"
#ifdef CONFIG_PM_SLEEP
static bool abort_flag;
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
index ed2a2a7..3556127 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra30.c
@@ -19,17 +19,17 @@
* more details.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/clk/tegra.h>
+#include <linux/clockchips.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
-#include <linux/clockchips.h>
-#include <linux/clk/tegra.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
-#include <asm/suspend.h>
#include <asm/smp_plat.h>
+#include <asm/suspend.h>
#include "pm.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index 7bc5d8d..3165631 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -24,12 +24,13 @@
#include <linux/kernel.h>
#include <linux/module.h>
-#include "fuse.h"
+#include <soc/tegra/fuse.h>
+
#include "cpuidle.h"
void __init tegra_cpuidle_init(void)
{
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_cpuidle_init();
@@ -49,7 +50,7 @@
void tegra_cpuidle_pcie_irqs_in_use(void)
{
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_cpuidle_pcie_irqs_in_use();
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index ce8ab8a..ec55d1d 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -18,14 +18,15 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <soc/tegra/fuse.h>
#include "flowctrl.h"
#include "iomap.h"
-#include "fuse.h"
static u8 flowctrl_offset_halt_cpu[] = {
FLOW_CTRL_HALT_CPU0_EVENTS,
@@ -76,7 +77,7 @@
int i;
reg = flowctrl_read_cpu_csr(cpuid);
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
/* clear wfe bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
@@ -117,7 +118,7 @@
/* Disable powergating via flow controller for CPU0 */
reg = flowctrl_read_cpu_csr(cpuid);
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
/* clear wfe bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
deleted file mode 100644
index c9ac23b..0000000
--- a/arch/arm/mach-tegra/fuse.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * arch/arm/mach-tegra/fuse.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
- *
- * Author:
- * Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/random.h>
-#include <linux/clk.h>
-#include <linux/tegra-soc.h>
-
-#include "fuse.h"
-#include "iomap.h"
-#include "apbio.h"
-
-/* Tegra20 only */
-#define FUSE_UID_LOW 0x108
-#define FUSE_UID_HIGH 0x10c
-
-/* Tegra30 and later */
-#define FUSE_VENDOR_CODE 0x200
-#define FUSE_FAB_CODE 0x204
-#define FUSE_LOT_CODE_0 0x208
-#define FUSE_LOT_CODE_1 0x20c
-#define FUSE_WAFER_ID 0x210
-#define FUSE_X_COORDINATE 0x214
-#define FUSE_Y_COORDINATE 0x218
-
-#define FUSE_SKU_INFO 0x110
-
-#define TEGRA20_FUSE_SPARE_BIT 0x200
-#define TEGRA30_FUSE_SPARE_BIT 0x244
-
-int tegra_sku_id;
-int tegra_cpu_process_id;
-int tegra_core_process_id;
-int tegra_chip_id;
-int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */
-int tegra_soc_speedo_id;
-enum tegra_revision tegra_revision;
-
-static struct clk *fuse_clk;
-static int tegra_fuse_spare_bit;
-static void (*tegra_init_speedo_data)(void);
-
-/* The BCT to use at boot is specified by board straps that can be read
- * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs.
- */
-int tegra_bct_strapping;
-
-#define STRAP_OPT 0x008
-#define GMI_AD0 (1 << 4)
-#define GMI_AD1 (1 << 5)
-#define RAM_ID_MASK (GMI_AD0 | GMI_AD1)
-#define RAM_CODE_SHIFT 4
-
-static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
- [TEGRA_REVISION_UNKNOWN] = "unknown",
- [TEGRA_REVISION_A01] = "A01",
- [TEGRA_REVISION_A02] = "A02",
- [TEGRA_REVISION_A03] = "A03",
- [TEGRA_REVISION_A03p] = "A03 prime",
- [TEGRA_REVISION_A04] = "A04",
-};
-
-static void tegra_fuse_enable_clk(void)
-{
- if (IS_ERR(fuse_clk))
- fuse_clk = clk_get_sys(NULL, "fuse");
- if (IS_ERR(fuse_clk))
- return;
- clk_prepare_enable(fuse_clk);
-}
-
-static void tegra_fuse_disable_clk(void)
-{
- if (IS_ERR(fuse_clk))
- return;
- clk_disable_unprepare(fuse_clk);
-}
-
-u32 tegra_fuse_readl(unsigned long offset)
-{
- return tegra_apb_readl(TEGRA_FUSE_BASE + offset);
-}
-
-bool tegra_spare_fuse(int bit)
-{
- bool ret;
-
- tegra_fuse_enable_clk();
-
- ret = tegra_fuse_readl(tegra_fuse_spare_bit + bit * 4);
-
- tegra_fuse_disable_clk();
-
- return ret;
-}
-
-static enum tegra_revision tegra_get_revision(u32 id)
-{
- u32 minor_rev = (id >> 16) & 0xf;
-
- switch (minor_rev) {
- case 1:
- return TEGRA_REVISION_A01;
- case 2:
- return TEGRA_REVISION_A02;
- case 3:
- if (tegra_chip_id == TEGRA20 &&
- (tegra_spare_fuse(18) || tegra_spare_fuse(19)))
- return TEGRA_REVISION_A03p;
- else
- return TEGRA_REVISION_A03;
- case 4:
- return TEGRA_REVISION_A04;
- default:
- return TEGRA_REVISION_UNKNOWN;
- }
-}
-
-static void tegra_get_process_id(void)
-{
- u32 reg;
-
- tegra_fuse_enable_clk();
-
- reg = tegra_fuse_readl(tegra_fuse_spare_bit);
- tegra_cpu_process_id = (reg >> 6) & 3;
- reg = tegra_fuse_readl(tegra_fuse_spare_bit);
- tegra_core_process_id = (reg >> 12) & 3;
-
- tegra_fuse_disable_clk();
-}
-
-u32 tegra_read_chipid(void)
-{
- return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
-}
-
-static void __init tegra20_fuse_init_randomness(void)
-{
- u32 randomness[2];
-
- randomness[0] = tegra_fuse_readl(FUSE_UID_LOW);
- randomness[1] = tegra_fuse_readl(FUSE_UID_HIGH);
-
- add_device_randomness(randomness, sizeof(randomness));
-}
-
-/* Applies to Tegra30 or later */
-static void __init tegra30_fuse_init_randomness(void)
-{
- u32 randomness[7];
-
- randomness[0] = tegra_fuse_readl(FUSE_VENDOR_CODE);
- randomness[1] = tegra_fuse_readl(FUSE_FAB_CODE);
- randomness[2] = tegra_fuse_readl(FUSE_LOT_CODE_0);
- randomness[3] = tegra_fuse_readl(FUSE_LOT_CODE_1);
- randomness[4] = tegra_fuse_readl(FUSE_WAFER_ID);
- randomness[5] = tegra_fuse_readl(FUSE_X_COORDINATE);
- randomness[6] = tegra_fuse_readl(FUSE_Y_COORDINATE);
-
- add_device_randomness(randomness, sizeof(randomness));
-}
-
-void __init tegra_init_fuse(void)
-{
- u32 id;
- u32 randomness[5];
-
- u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
- reg |= 1 << 28;
- writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
-
- /*
- * Enable FUSE clock. This needs to be hardcoded because the clock
- * subsystem is not active during early boot.
- */
- reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x14));
- reg |= 1 << 7;
- writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x14));
- fuse_clk = ERR_PTR(-EINVAL);
-
- reg = tegra_fuse_readl(FUSE_SKU_INFO);
- randomness[0] = reg;
- tegra_sku_id = reg & 0xFF;
-
- reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
- randomness[1] = reg;
- tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
-
- id = tegra_read_chipid();
- randomness[2] = id;
- tegra_chip_id = (id >> 8) & 0xff;
-
- switch (tegra_chip_id) {
- case TEGRA20:
- tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
- tegra_init_speedo_data = &tegra20_init_speedo_data;
- break;
- case TEGRA30:
- tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT;
- tegra_init_speedo_data = &tegra30_init_speedo_data;
- break;
- case TEGRA114:
- tegra_init_speedo_data = &tegra114_init_speedo_data;
- break;
- default:
- pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id);
- tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
- tegra_init_speedo_data = &tegra_get_process_id;
- }
-
- tegra_revision = tegra_get_revision(id);
- tegra_init_speedo_data();
- randomness[3] = (tegra_cpu_process_id << 16) | tegra_core_process_id;
- randomness[4] = (tegra_cpu_speedo_id << 16) | tegra_soc_speedo_id;
-
- add_device_randomness(randomness, sizeof(randomness));
- switch (tegra_chip_id) {
- case TEGRA20:
- tegra20_fuse_init_randomness();
- break;
- case TEGRA30:
- case TEGRA114:
- default:
- tegra30_fuse_init_randomness();
- break;
- }
-
- pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
- tegra_revision_name[tegra_revision],
- tegra_sku_id, tegra_cpu_process_id,
- tegra_core_process_id);
-}
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
deleted file mode 100644
index c01d047..0000000
--- a/arch/arm/mach-tegra/fuse.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (C) 2010 Google, Inc.
- * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
- *
- * Author:
- * Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_FUSE_H
-#define __MACH_TEGRA_FUSE_H
-
-#define SKU_ID_T20 8
-#define SKU_ID_T25SE 20
-#define SKU_ID_AP25 23
-#define SKU_ID_T25 24
-#define SKU_ID_AP25E 27
-#define SKU_ID_T25E 28
-
-#define TEGRA20 0x20
-#define TEGRA30 0x30
-#define TEGRA114 0x35
-#define TEGRA124 0x40
-
-#ifndef __ASSEMBLY__
-enum tegra_revision {
- TEGRA_REVISION_UNKNOWN = 0,
- TEGRA_REVISION_A01,
- TEGRA_REVISION_A02,
- TEGRA_REVISION_A03,
- TEGRA_REVISION_A03p,
- TEGRA_REVISION_A04,
- TEGRA_REVISION_MAX,
-};
-
-extern int tegra_sku_id;
-extern int tegra_cpu_process_id;
-extern int tegra_core_process_id;
-extern int tegra_chip_id;
-extern int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */
-extern int tegra_soc_speedo_id;
-extern enum tegra_revision tegra_revision;
-
-extern int tegra_bct_strapping;
-
-unsigned long long tegra_chip_uid(void);
-void tegra_init_fuse(void);
-bool tegra_spare_fuse(int bit);
-u32 tegra_fuse_readl(unsigned long offset);
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void tegra20_init_speedo_data(void);
-#else
-static inline void tegra20_init_speedo_data(void) {}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-void tegra30_init_speedo_data(void);
-#else
-static inline void tegra30_init_speedo_data(void) {}
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_114_SOC
-void tegra114_init_speedo_data(void);
-#else
-static inline void tegra114_init_speedo_data(void) {}
-#endif
-#endif /* __ASSEMBLY__ */
-
-#endif
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index ff26af2..d60339c 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -7,13 +7,15 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#include <linux/clk/tegra.h>
#include <linux/kernel.h>
#include <linux/smp.h>
-#include <linux/clk/tegra.h>
+
+#include <soc/tegra/fuse.h>
#include <asm/smp_plat.h>
-#include "fuse.h"
#include "sleep.h"
static void (*tegra_hotplug_shutdown)(void);
@@ -51,12 +53,12 @@
if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
return;
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_get_chip_id() == TEGRA20)
tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_get_chip_id() == TEGRA30)
tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_get_chip_id() == TEGRA114)
tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_get_chip_id() == TEGRA124)
tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
}
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index bb9c9c2..352de15 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -18,14 +18,14 @@
*
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/mm.h>
#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
-#include <asm/page.h>
#include <asm/mach/map.h>
+#include <asm/page.h>
#include "board.h"
#include "iomap.h"
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 1a74d56..da7be13 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -17,14 +17,14 @@
*
*/
-#include <linux/kernel.h>
#include <linux/cpu_pm.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
#include <linux/syscore_ops.h>
#include "board.h"
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 929d104..0466a14 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -11,27 +11,28 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/init.h>
-#include <linux/errno.h>
+
+#include <linux/clk/tegra.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/clk/tegra.h>
+
+#include <soc/tegra/fuse.h>
#include <asm/cacheflush.h>
#include <asm/mach-types.h>
-#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
-
-#include "fuse.h"
-#include "flowctrl.h"
-#include "reset.h"
-#include "pmc.h"
+#include <asm/smp_scu.h>
#include "common.h"
+#include "flowctrl.h"
#include "iomap.h"
+#include "pmc.h"
+#include "reset.h"
static cpumask_t tegra_cpu_init_mask;
@@ -170,13 +171,13 @@
static int tegra_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_get_chip_id() == TEGRA20)
return tegra20_boot_secondary(cpu, idle);
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_get_chip_id() == TEGRA30)
return tegra30_boot_secondary(cpu, idle);
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_get_chip_id() == TEGRA114)
return tegra114_boot_secondary(cpu, idle);
- if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
+ if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_get_chip_id() == TEGRA124)
return tegra114_boot_secondary(cpu, idle);
return -EINVAL;
diff --git a/arch/arm/mach-tegra/pm-tegra20.c b/arch/arm/mach-tegra/pm-tegra20.c
index d65e1d7..39ac2b7 100644
--- a/arch/arm/mach-tegra/pm-tegra20.c
+++ b/arch/arm/mach-tegra/pm-tegra20.c
@@ -13,6 +13,7 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+
#include <linux/kernel.h>
#include "pm.h"
diff --git a/arch/arm/mach-tegra/pm-tegra30.c b/arch/arm/mach-tegra/pm-tegra30.c
index 8fa326d..46cc19d 100644
--- a/arch/arm/mach-tegra/pm-tegra30.c
+++ b/arch/arm/mach-tegra/pm-tegra30.c
@@ -13,6 +13,7 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+
#include <linux/kernel.h>
#include "pm.h"
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index f55b05a..94db3b6 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -16,30 +16,31 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/cpumask.h>
-#include <linux/delay.h>
-#include <linux/cpu_pm.h>
-#include <linux/suspend.h>
-#include <linux/err.h>
-#include <linux/slab.h>
#include <linux/clk/tegra.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/suspend.h>
-#include <asm/smp_plat.h>
+#include <soc/tegra/fuse.h>
+
#include <asm/cacheflush.h>
-#include <asm/suspend.h>
#include <asm/idmap.h>
#include <asm/proc-fns.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
#include <asm/tlbflush.h>
-#include "iomap.h"
-#include "reset.h"
#include "flowctrl.h"
-#include "fuse.h"
-#include "pm.h"
+#include "iomap.h"
#include "pmc.h"
+#include "pm.h"
+#include "reset.h"
#include "sleep.h"
#ifdef CONFIG_PM_SLEEP
@@ -53,7 +54,7 @@
static void tegra_tear_down_cpu_init(void)
{
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra_tear_down_cpu = tegra20_tear_down_cpu;
@@ -143,7 +144,7 @@
if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask))
last_cpu = true;
- else if (tegra_chip_id == TEGRA20 && phy_cpu_id == 1)
+ else if (tegra_get_chip_id() == TEGRA20 && phy_cpu_id == 1)
tegra20_cpu_set_resettable_soon();
spin_unlock(&tegra_lp2_lock);
@@ -212,7 +213,7 @@
*/
static bool tegra_lp1_iram_hook(void)
{
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_lp1_iram_hook();
@@ -242,7 +243,7 @@
static bool tegra_sleep_core_init(void)
{
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_sleep_core_init();
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index 7c7123e..69df180 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -15,15 +15,16 @@
*
*/
-#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/tegra-powergate.h>
+
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/powergate.h>
#include "flowctrl.h"
-#include "fuse.h"
#include "pm.h"
#include "pmc.h"
#include "sleep.h"
@@ -251,7 +252,7 @@
reg |= TEGRA_POWER_CPU_PWRREQ_OE;
reg &= ~TEGRA_POWER_EFFECT_LP0;
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
case TEGRA30:
break;
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index 4cefc5c..0a14b86 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -17,21 +17,22 @@
*
*/
-#include <linux/kernel.h>
#include <linux/clk.h>
+#include <linux/clk/tegra.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/kernel.h>
#include <linux/reset.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
-#include <linux/clk/tegra.h>
-#include <linux/tegra-powergate.h>
-#include "fuse.h"
+#include <soc/tegra/fuse.h>
+#include <soc/tegra/powergate.h>
+
#include "iomap.h"
#define DPD_SAMPLE 0x020
@@ -157,7 +158,7 @@
* The Tegra124 GPU has a separate register (with different semantics)
* to remove clamps.
*/
- if (tegra_chip_id == TEGRA124) {
+ if (tegra_get_chip_id() == TEGRA124) {
if (id == TEGRA_POWERGATE_3D) {
pmc_write(0, GPU_RG_CNTRL);
return 0;
@@ -227,7 +228,7 @@
int __init tegra_powergate_init(void)
{
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
tegra_num_powerdomains = 7;
break;
@@ -368,7 +369,7 @@
{
struct dentry *d;
- switch (tegra_chip_id) {
+ switch (tegra_get_chip_id()) {
case TEGRA20:
powergate_name = powergate_name_t20;
break;
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
index 578d4d1a..7b2baab 100644
--- a/arch/arm/mach-tegra/reset-handler.S
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -14,14 +14,15 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/linkage.h>
-#include <asm/cache.h>
+#include <soc/tegra/fuse.h>
+
#include <asm/asm-offsets.h>
+#include <asm/cache.h>
#include "flowctrl.h"
-#include "fuse.h"
#include "iomap.h"
#include "reset.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 146fe8e..5377495 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -14,20 +14,21 @@
*
*/
+#include <linux/bitops.h>
+#include <linux/cpumask.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/cpumask.h>
-#include <linux/bitops.h>
+
+#include <soc/tegra/fuse.h>
#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
#include <asm/firmware.h>
+#include <asm/hardware/cache-l2x0.h>
#include "iomap.h"
#include "irammap.h"
#include "reset.h"
#include "sleep.h"
-#include "fuse.h"
#define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \
TEGRA_IRAM_RESET_HANDLER_OFFSET)
@@ -53,7 +54,7 @@
* Prevent further modifications to the physical reset vector.
* NOTE: Has no effect on chips prior to Tegra30.
*/
- if (tegra_chip_id != TEGRA20) {
+ if (tegra_get_chip_id() != TEGRA20) {
reg = readl(sb_ctrl);
reg |= 2;
writel(reg, sb_ctrl);
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index b16d4a57..8ea699b 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -16,14 +16,15 @@
#include <linux/linkage.h>
-#include <asm/assembler.h>
+#include <soc/tegra/fuse.h>
+
#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
#include <asm/cache.h>
-#include "irammap.h"
-#include "fuse.h"
-#include "sleep.h"
#include "flowctrl.h"
+#include "irammap.h"
+#include "sleep.h"
#define EMC_CFG 0xc
#define EMC_ADR_CFG 0x10
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 15ac9fc..6ccbc8c 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -16,37 +16,37 @@
*
*/
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
#include <linux/clk.h>
+#include <linux/clk/tegra.h>
#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
#include <linux/irqdomain.h>
-#include <linux/of.h>
+#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
+#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/pda_power.h>
-#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
#include <linux/usb/tegra_usb_phy.h>
-#include <linux/clk/tegra.h>
-#include <linux/irqchip.h>
+
+#include <soc/tegra/fuse.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/trusted_foundations.h>
-#include "apbio.h"
#include "board.h"
#include "common.h"
#include "cpuidle.h"
-#include "fuse.h"
#include "iomap.h"
#include "irq.h"
#include "pmc.h"
@@ -73,7 +73,6 @@
static void __init tegra_init_early(void)
{
of_register_trusted_foundations();
- tegra_apb_io_init();
tegra_init_fuse();
tegra_cpu_reset_handler_init();
tegra_powergate_init();
@@ -103,8 +102,9 @@
goto out;
soc_dev_attr->family = kasprintf(GFP_KERNEL, "Tegra");
- soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d", tegra_revision);
- soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", tegra_chip_id);
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d",
+ tegra_sku_info.revision);
+ soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%u", tegra_get_chip_id());
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
diff --git a/arch/arm/mach-tegra/tegra114_speedo.c b/arch/arm/mach-tegra/tegra114_speedo.c
deleted file mode 100644
index 5218d48..0000000
--- a/arch/arm/mach-tegra/tegra114_speedo.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/bug.h>
-
-#include "fuse.h"
-
-#define CORE_PROCESS_CORNERS_NUM 2
-#define CPU_PROCESS_CORNERS_NUM 2
-
-enum {
- THRESHOLD_INDEX_0,
- THRESHOLD_INDEX_1,
- THRESHOLD_INDEX_COUNT,
-};
-
-static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = {
- {1123, UINT_MAX},
- {0, UINT_MAX},
-};
-
-static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = {
- {1695, UINT_MAX},
- {0, UINT_MAX},
-};
-
-static void rev_sku_to_speedo_ids(int rev, int sku, int *threshold)
-{
- u32 tmp;
-
- switch (sku) {
- case 0x00:
- case 0x10:
- case 0x05:
- case 0x06:
- tegra_cpu_speedo_id = 1;
- tegra_soc_speedo_id = 0;
- *threshold = THRESHOLD_INDEX_0;
- break;
-
- case 0x03:
- case 0x04:
- tegra_cpu_speedo_id = 2;
- tegra_soc_speedo_id = 1;
- *threshold = THRESHOLD_INDEX_1;
- break;
-
- default:
- pr_err("Tegra114 Unknown SKU %d\n", sku);
- tegra_cpu_speedo_id = 0;
- tegra_soc_speedo_id = 0;
- *threshold = THRESHOLD_INDEX_0;
- break;
- }
-
- if (rev == TEGRA_REVISION_A01) {
- tmp = tegra_fuse_readl(0x270) << 1;
- tmp |= tegra_fuse_readl(0x26c);
- if (!tmp)
- tegra_cpu_speedo_id = 0;
- }
-}
-
-void tegra114_init_speedo_data(void)
-{
- u32 cpu_speedo_val;
- u32 core_speedo_val;
- int threshold;
- int i;
-
- BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
- THRESHOLD_INDEX_COUNT);
- BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
- THRESHOLD_INDEX_COUNT);
-
- rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id, &threshold);
-
- cpu_speedo_val = tegra_fuse_readl(0x12c) + 1024;
- core_speedo_val = tegra_fuse_readl(0x134);
-
- for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++)
- if (cpu_speedo_val < cpu_process_speedos[threshold][i])
- break;
- tegra_cpu_process_id = i;
-
- for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++)
- if (core_speedo_val < core_process_speedos[threshold][i])
- break;
- tegra_core_process_id = i;
-}
diff --git a/arch/arm/mach-tegra/tegra30_speedo.c b/arch/arm/mach-tegra/tegra30_speedo.c
deleted file mode 100644
index 125cb16..0000000
--- a/arch/arm/mach-tegra/tegra30_speedo.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/bug.h>
-
-#include "fuse.h"
-
-#define CORE_PROCESS_CORNERS_NUM 1
-#define CPU_PROCESS_CORNERS_NUM 6
-
-#define FUSE_SPEEDO_CALIB_0 0x114
-#define FUSE_PACKAGE_INFO 0X1FC
-#define FUSE_TEST_PROG_VER 0X128
-
-#define G_SPEEDO_BIT_MINUS1 58
-#define G_SPEEDO_BIT_MINUS1_R 59
-#define G_SPEEDO_BIT_MINUS2 60
-#define G_SPEEDO_BIT_MINUS2_R 61
-#define LP_SPEEDO_BIT_MINUS1 62
-#define LP_SPEEDO_BIT_MINUS1_R 63
-#define LP_SPEEDO_BIT_MINUS2 64
-#define LP_SPEEDO_BIT_MINUS2_R 65
-
-enum {
- THRESHOLD_INDEX_0,
- THRESHOLD_INDEX_1,
- THRESHOLD_INDEX_2,
- THRESHOLD_INDEX_3,
- THRESHOLD_INDEX_4,
- THRESHOLD_INDEX_5,
- THRESHOLD_INDEX_6,
- THRESHOLD_INDEX_7,
- THRESHOLD_INDEX_8,
- THRESHOLD_INDEX_9,
- THRESHOLD_INDEX_10,
- THRESHOLD_INDEX_11,
- THRESHOLD_INDEX_COUNT,
-};
-
-static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = {
- {180},
- {170},
- {195},
- {180},
- {168},
- {192},
- {180},
- {170},
- {195},
- {180},
- {180},
- {180},
-};
-
-static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = {
- {306, 338, 360, 376, UINT_MAX},
- {295, 336, 358, 375, UINT_MAX},
- {325, 325, 358, 375, UINT_MAX},
- {325, 325, 358, 375, UINT_MAX},
- {292, 324, 348, 364, UINT_MAX},
- {324, 324, 348, 364, UINT_MAX},
- {324, 324, 348, 364, UINT_MAX},
- {295, 336, 358, 375, UINT_MAX},
- {358, 358, 358, 358, 397, UINT_MAX},
- {364, 364, 364, 364, 397, UINT_MAX},
- {295, 336, 358, 375, 391, UINT_MAX},
- {295, 336, 358, 375, 391, UINT_MAX},
-};
-
-static int threshold_index;
-static int package_id;
-
-static void fuse_speedo_calib(u32 *speedo_g, u32 *speedo_lp)
-{
- u32 reg;
- int ate_ver;
- int bit_minus1;
- int bit_minus2;
-
- reg = tegra_fuse_readl(FUSE_SPEEDO_CALIB_0);
-
- *speedo_lp = (reg & 0xFFFF) * 4;
- *speedo_g = ((reg >> 16) & 0xFFFF) * 4;
-
- ate_ver = tegra_fuse_readl(FUSE_TEST_PROG_VER);
- pr_info("%s: ATE prog ver %d.%d\n", __func__, ate_ver/10, ate_ver%10);
-
- if (ate_ver >= 26) {
- bit_minus1 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1);
- bit_minus1 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1_R);
- bit_minus2 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2);
- bit_minus2 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2_R);
- *speedo_lp |= (bit_minus1 << 1) | bit_minus2;
-
- bit_minus1 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS1);
- bit_minus1 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS1_R);
- bit_minus2 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS2);
- bit_minus2 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS2_R);
- *speedo_g |= (bit_minus1 << 1) | bit_minus2;
- } else {
- *speedo_lp |= 0x3;
- *speedo_g |= 0x3;
- }
-}
-
-static void rev_sku_to_speedo_ids(int rev, int sku)
-{
- switch (rev) {
- case TEGRA_REVISION_A01:
- tegra_cpu_speedo_id = 0;
- tegra_soc_speedo_id = 0;
- threshold_index = THRESHOLD_INDEX_0;
- break;
- case TEGRA_REVISION_A02:
- case TEGRA_REVISION_A03:
- switch (sku) {
- case 0x87:
- case 0x82:
- tegra_cpu_speedo_id = 1;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_1;
- break;
- case 0x81:
- switch (package_id) {
- case 1:
- tegra_cpu_speedo_id = 2;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_2;
- break;
- case 2:
- tegra_cpu_speedo_id = 4;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_7;
- break;
- default:
- pr_err("Tegra30: Unknown pkg %d\n", package_id);
- BUG();
- break;
- }
- break;
- case 0x80:
- switch (package_id) {
- case 1:
- tegra_cpu_speedo_id = 5;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_8;
- break;
- case 2:
- tegra_cpu_speedo_id = 6;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_9;
- break;
- default:
- pr_err("Tegra30: Unknown pkg %d\n", package_id);
- BUG();
- break;
- }
- break;
- case 0x83:
- switch (package_id) {
- case 1:
- tegra_cpu_speedo_id = 7;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_10;
- break;
- case 2:
- tegra_cpu_speedo_id = 3;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_3;
- break;
- default:
- pr_err("Tegra30: Unknown pkg %d\n", package_id);
- BUG();
- break;
- }
- break;
- case 0x8F:
- tegra_cpu_speedo_id = 8;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_11;
- break;
- case 0x08:
- tegra_cpu_speedo_id = 1;
- tegra_soc_speedo_id = 1;
- threshold_index = THRESHOLD_INDEX_4;
- break;
- case 0x02:
- tegra_cpu_speedo_id = 2;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_5;
- break;
- case 0x04:
- tegra_cpu_speedo_id = 3;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_6;
- break;
- case 0:
- switch (package_id) {
- case 1:
- tegra_cpu_speedo_id = 2;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_2;
- break;
- case 2:
- tegra_cpu_speedo_id = 3;
- tegra_soc_speedo_id = 2;
- threshold_index = THRESHOLD_INDEX_3;
- break;
- default:
- pr_err("Tegra30: Unknown pkg %d\n", package_id);
- BUG();
- break;
- }
- break;
- default:
- pr_warn("Tegra30: Unknown SKU %d\n", sku);
- tegra_cpu_speedo_id = 0;
- tegra_soc_speedo_id = 0;
- threshold_index = THRESHOLD_INDEX_0;
- break;
- }
- break;
- default:
- pr_warn("Tegra30: Unknown chip rev %d\n", rev);
- tegra_cpu_speedo_id = 0;
- tegra_soc_speedo_id = 0;
- threshold_index = THRESHOLD_INDEX_0;
- break;
- }
-}
-
-void tegra30_init_speedo_data(void)
-{
- u32 cpu_speedo_val;
- u32 core_speedo_val;
- int i;
-
- BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
- THRESHOLD_INDEX_COUNT);
- BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
- THRESHOLD_INDEX_COUNT);
-
- package_id = tegra_fuse_readl(FUSE_PACKAGE_INFO) & 0x0F;
-
- rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id);
- fuse_speedo_calib(&cpu_speedo_val, &core_speedo_val);
- pr_debug("%s CPU speedo value %u\n", __func__, cpu_speedo_val);
- pr_debug("%s Core speedo value %u\n", __func__, core_speedo_val);
-
- for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) {
- if (cpu_speedo_val < cpu_process_speedos[threshold_index][i])
- break;
- }
- tegra_cpu_process_id = i - 1;
-
- if (tegra_cpu_process_id == -1) {
- pr_warn("Tegra30: CPU speedo value %3d out of range",
- cpu_speedo_val);
- tegra_cpu_process_id = 0;
- tegra_cpu_speedo_id = 1;
- }
-
- for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) {
- if (core_speedo_val < core_process_speedos[threshold_index][i])
- break;
- }
- tegra_core_process_id = i - 1;
-
- if (tegra_core_process_id == -1) {
- pr_warn("Tegra30: CORE speedo value %3d out of range",
- core_speedo_val);
- tegra_core_process_id = 0;
- tegra_soc_speedo_id = 1;
- }
-
- pr_info("Tegra30: CPU Speedo ID %d, Soc Speedo ID %d",
- tegra_cpu_speedo_id, tegra_soc_speedo_id);
-}
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c
index 558a239..d8961ef 100644
--- a/drivers/amba/tegra-ahb.c
+++ b/drivers/amba/tegra-ahb.c
@@ -25,7 +25,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/tegra-ahb.h>
+
+#include <soc/tegra/ahb.h>
#define DRV_NAME "tegra-ahb"
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index f8ee13c7..75c9681 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -162,7 +162,9 @@
}
}
- ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+ ret = of_platform_populate(pdev->dev.of_node,
+ of_default_bus_match_table,
+ NULL, &pdev->dev);
if (ret)
dev_err(&pdev->dev, "%s fail to create devices.\n",
pdev->dev.of_node->full_name);
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index 57a078e..b9355da 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -64,11 +64,56 @@
const struct clk_ops *mux_ops = composite->mux_ops;
struct clk_hw *rate_hw = composite->rate_hw;
struct clk_hw *mux_hw = composite->mux_hw;
+ struct clk *parent;
+ unsigned long parent_rate;
+ long tmp_rate, best_rate = 0;
+ unsigned long rate_diff;
+ unsigned long best_rate_diff = ULONG_MAX;
+ int i;
if (rate_hw && rate_ops && rate_ops->determine_rate) {
rate_hw->clk = hw->clk;
return rate_ops->determine_rate(rate_hw, rate, best_parent_rate,
best_parent_p);
+ } else if (rate_hw && rate_ops && rate_ops->round_rate &&
+ mux_hw && mux_ops && mux_ops->set_parent) {
+ *best_parent_p = NULL;
+
+ if (__clk_get_flags(hw->clk) & CLK_SET_RATE_NO_REPARENT) {
+ *best_parent_p = clk_get_parent(mux_hw->clk);
+ *best_parent_rate = __clk_get_rate(*best_parent_p);
+
+ return rate_ops->round_rate(rate_hw, rate,
+ best_parent_rate);
+ }
+
+ for (i = 0; i < __clk_get_num_parents(mux_hw->clk); i++) {
+ parent = clk_get_parent_by_index(mux_hw->clk, i);
+ if (!parent)
+ continue;
+
+ parent_rate = __clk_get_rate(parent);
+
+ tmp_rate = rate_ops->round_rate(rate_hw, rate,
+ &parent_rate);
+ if (tmp_rate < 0)
+ continue;
+
+ rate_diff = abs(rate - tmp_rate);
+
+ if (!rate_diff || !*best_parent_p
+ || best_rate_diff > rate_diff) {
+ *best_parent_p = parent;
+ *best_parent_rate = parent_rate;
+ best_rate_diff = rate_diff;
+ best_rate = tmp_rate;
+ }
+
+ if (!rate_diff)
+ return rate;
+ }
+
+ return best_rate;
} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
mux_hw->clk = hw->clk;
return mux_ops->determine_rate(mux_hw, rate, best_parent_rate,
@@ -162,7 +207,7 @@
clk_composite_ops = &composite->ops;
if (mux_hw && mux_ops) {
- if (!mux_ops->get_parent || !mux_ops->set_parent) {
+ if (!mux_ops->get_parent) {
clk = ERR_PTR(-EINVAL);
goto err;
}
@@ -170,7 +215,8 @@
composite->mux_hw = mux_hw;
composite->mux_ops = mux_ops;
clk_composite_ops->get_parent = clk_composite_get_parent;
- clk_composite_ops->set_parent = clk_composite_set_parent;
+ if (mux_ops->set_parent)
+ clk_composite_ops->set_parent = clk_composite_set_parent;
if (mux_ops->determine_rate)
clk_composite_ops->determine_rate = clk_composite_determine_rate;
}
@@ -180,24 +226,27 @@
clk = ERR_PTR(-EINVAL);
goto err;
}
+ clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
- /* .round_rate is a prerequisite for .set_rate */
- if (rate_ops->round_rate) {
- clk_composite_ops->round_rate = clk_composite_round_rate;
- if (rate_ops->set_rate) {
- clk_composite_ops->set_rate = clk_composite_set_rate;
- }
- } else {
- WARN(rate_ops->set_rate,
- "%s: missing round_rate op is required\n",
- __func__);
+ if (rate_ops->determine_rate)
+ clk_composite_ops->determine_rate =
+ clk_composite_determine_rate;
+ else if (rate_ops->round_rate)
+ clk_composite_ops->round_rate =
+ clk_composite_round_rate;
+
+ /* .set_rate requires either .round_rate or .determine_rate */
+ if (rate_ops->set_rate) {
+ if (rate_ops->determine_rate || rate_ops->round_rate)
+ clk_composite_ops->set_rate =
+ clk_composite_set_rate;
+ else
+ WARN(1, "%s: missing round_rate op is required\n",
+ __func__);
}
composite->rate_hw = rate_hw;
composite->rate_ops = rate_ops;
- clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
- if (rate_ops->determine_rate)
- clk_composite_ops->determine_rate = clk_composite_determine_rate;
}
if (gate_hw && gate_ops) {
diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
index 8d3aefa..ee6b077 100644
--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
@@ -3,3 +3,9 @@
#
obj-y += clk-rockchip.o
+obj-y += clk.o
+obj-y += clk-pll.o
+obj-$(CONFIG_RESET_CONTROLLER) += softrst.o
+
+obj-y += clk-rk3188.o
+obj-y += clk-rk3288.o
diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
new file mode 100644
index 0000000..f2a1c7a
--- /dev/null
+++ b/drivers/clk/rockchip/clk-pll.c
@@ -0,0 +1,431 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/div64.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include "clk.h"
+
+#define PLL_MODE_MASK 0x3
+#define PLL_MODE_SLOW 0x0
+#define PLL_MODE_NORM 0x1
+#define PLL_MODE_DEEP 0x2
+
+struct rockchip_clk_pll {
+ struct clk_hw hw;
+
+ struct clk_mux pll_mux;
+ const struct clk_ops *pll_mux_ops;
+
+ struct notifier_block clk_nb;
+ bool rate_change_remuxed;
+
+ void __iomem *reg_base;
+ int lock_offset;
+ unsigned int lock_shift;
+ enum rockchip_pll_type type;
+ const struct rockchip_pll_rate_table *rate_table;
+ unsigned int rate_count;
+ spinlock_t *lock;
+};
+
+#define to_rockchip_clk_pll(_hw) container_of(_hw, struct rockchip_clk_pll, hw)
+#define to_rockchip_clk_pll_nb(nb) \
+ container_of(nb, struct rockchip_clk_pll, clk_nb)
+
+static const struct rockchip_pll_rate_table *rockchip_get_pll_settings(
+ struct rockchip_clk_pll *pll, unsigned long rate)
+{
+ const struct rockchip_pll_rate_table *rate_table = pll->rate_table;
+ int i;
+
+ for (i = 0; i < pll->rate_count; i++) {
+ if (rate == rate_table[i].rate)
+ return &rate_table[i];
+ }
+
+ return NULL;
+}
+
+static long rockchip_pll_round_rate(struct clk_hw *hw,
+ unsigned long drate, unsigned long *prate)
+{
+ struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+ const struct rockchip_pll_rate_table *rate_table = pll->rate_table;
+ int i;
+
+ /* Assumming rate_table is in descending order */
+ for (i = 0; i < pll->rate_count; i++) {
+ if (drate >= rate_table[i].rate)
+ return rate_table[i].rate;
+ }
+
+ /* return minimum supported value */
+ return rate_table[i - 1].rate;
+}
+
+/*
+ * Wait for the pll to reach the locked state.
+ * The calling set_rate function is responsible for making sure the
+ * grf regmap is available.
+ */
+static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
+{
+ struct regmap *grf = rockchip_clk_get_grf();
+ unsigned int val;
+ int delay = 24000000, ret;
+
+ while (delay > 0) {
+ ret = regmap_read(grf, pll->lock_offset, &val);
+ if (ret) {
+ pr_err("%s: failed to read pll lock status: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ if (val & BIT(pll->lock_shift))
+ return 0;
+ delay--;
+ }
+
+ pr_err("%s: timeout waiting for pll to lock\n", __func__);
+ return -ETIMEDOUT;
+}
+
+/**
+ * Set pll mux when changing the pll rate.
+ * This makes sure to move the pll mux away from the actual pll before
+ * changing its rate and back to the original parent after the change.
+ */
+static int rockchip_pll_notifier_cb(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct rockchip_clk_pll *pll = to_rockchip_clk_pll_nb(nb);
+ struct clk_mux *pll_mux = &pll->pll_mux;
+ const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
+ int cur_parent;
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
+ if (cur_parent == PLL_MODE_NORM) {
+ pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
+ pll->rate_change_remuxed = 1;
+ }
+ break;
+ case POST_RATE_CHANGE:
+ if (pll->rate_change_remuxed) {
+ pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
+ pll->rate_change_remuxed = 0;
+ }
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+/**
+ * PLL used in RK3066, RK3188 and RK3288
+ */
+
+#define RK3066_PLL_RESET_DELAY(nr) ((nr * 500) / 24 + 1)
+
+#define RK3066_PLLCON(i) (i * 0x4)
+#define RK3066_PLLCON0_OD_MASK 0xf
+#define RK3066_PLLCON0_OD_SHIFT 0
+#define RK3066_PLLCON0_NR_MASK 0x3f
+#define RK3066_PLLCON0_NR_SHIFT 8
+#define RK3066_PLLCON1_NF_MASK 0x1fff
+#define RK3066_PLLCON1_NF_SHIFT 0
+#define RK3066_PLLCON2_BWADJ_MASK 0xfff
+#define RK3066_PLLCON2_BWADJ_SHIFT 0
+#define RK3066_PLLCON3_RESET (1 << 5)
+#define RK3066_PLLCON3_PWRDOWN (1 << 1)
+#define RK3066_PLLCON3_BYPASS (1 << 0)
+
+static unsigned long rockchip_rk3066_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+ u64 nf, nr, no, rate64 = prate;
+ u32 pllcon;
+
+ pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(3));
+ if (pllcon & RK3066_PLLCON3_BYPASS) {
+ pr_debug("%s: pll %s is bypassed\n", __func__,
+ __clk_get_name(hw->clk));
+ return prate;
+ }
+
+ pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(1));
+ nf = (pllcon >> RK3066_PLLCON1_NF_SHIFT) & RK3066_PLLCON1_NF_MASK;
+
+ pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(0));
+ nr = (pllcon >> RK3066_PLLCON0_NR_SHIFT) & RK3066_PLLCON0_NR_MASK;
+ no = (pllcon >> RK3066_PLLCON0_OD_SHIFT) & RK3066_PLLCON0_OD_MASK;
+
+ rate64 *= (nf + 1);
+ do_div(rate64, nr + 1);
+ do_div(rate64, no + 1);
+
+ return (unsigned long)rate64;
+}
+
+static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+ const struct rockchip_pll_rate_table *rate;
+ unsigned long old_rate = rockchip_rk3066_pll_recalc_rate(hw, prate);
+ struct regmap *grf = rockchip_clk_get_grf();
+ int ret;
+
+ if (IS_ERR(grf)) {
+ pr_debug("%s: grf regmap not available, aborting rate change\n",
+ __func__);
+ return PTR_ERR(grf);
+ }
+
+ pr_debug("%s: changing %s from %lu to %lu with a parent rate of %lu\n",
+ __func__, __clk_get_name(hw->clk), old_rate, drate, prate);
+
+ /* Get required rate settings from table */
+ rate = rockchip_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ pr_debug("%s: rate settings for %lu (nr, no, nf): (%d, %d, %d)\n",
+ __func__, rate->rate, rate->nr, rate->no, rate->nf);
+
+ /* enter reset mode */
+ writel(HIWORD_UPDATE(RK3066_PLLCON3_RESET, RK3066_PLLCON3_RESET, 0),
+ pll->reg_base + RK3066_PLLCON(3));
+
+ /* update pll values */
+ writel(HIWORD_UPDATE(rate->nr - 1, RK3066_PLLCON0_NR_MASK,
+ RK3066_PLLCON0_NR_SHIFT) |
+ HIWORD_UPDATE(rate->no - 1, RK3066_PLLCON0_OD_MASK,
+ RK3066_PLLCON0_OD_SHIFT),
+ pll->reg_base + RK3066_PLLCON(0));
+
+ writel_relaxed(HIWORD_UPDATE(rate->nf - 1, RK3066_PLLCON1_NF_MASK,
+ RK3066_PLLCON1_NF_SHIFT),
+ pll->reg_base + RK3066_PLLCON(1));
+ writel_relaxed(HIWORD_UPDATE(rate->bwadj, RK3066_PLLCON2_BWADJ_MASK,
+ RK3066_PLLCON2_BWADJ_SHIFT),
+ pll->reg_base + RK3066_PLLCON(2));
+
+ /* leave reset and wait the reset_delay */
+ writel(HIWORD_UPDATE(0, RK3066_PLLCON3_RESET, 0),
+ pll->reg_base + RK3066_PLLCON(3));
+ udelay(RK3066_PLL_RESET_DELAY(rate->nr));
+
+ /* wait for the pll to lock */
+ ret = rockchip_pll_wait_lock(pll);
+ if (ret) {
+ pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
+ __func__, old_rate);
+ rockchip_rk3066_pll_set_rate(hw, old_rate, prate);
+ }
+
+ return ret;
+}
+
+static int rockchip_rk3066_pll_enable(struct clk_hw *hw)
+{
+ struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+
+ writel(HIWORD_UPDATE(0, RK3066_PLLCON3_PWRDOWN, 0),
+ pll->reg_base + RK3066_PLLCON(3));
+
+ return 0;
+}
+
+static void rockchip_rk3066_pll_disable(struct clk_hw *hw)
+{
+ struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+
+ writel(HIWORD_UPDATE(RK3066_PLLCON3_PWRDOWN,
+ RK3066_PLLCON3_PWRDOWN, 0),
+ pll->reg_base + RK3066_PLLCON(3));
+}
+
+static int rockchip_rk3066_pll_is_enabled(struct clk_hw *hw)
+{
+ struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
+ u32 pllcon = readl(pll->reg_base + RK3066_PLLCON(3));
+
+ return !(pllcon & RK3066_PLLCON3_PWRDOWN);
+}
+
+static const struct clk_ops rockchip_rk3066_pll_clk_norate_ops = {
+ .recalc_rate = rockchip_rk3066_pll_recalc_rate,
+ .enable = rockchip_rk3066_pll_enable,
+ .disable = rockchip_rk3066_pll_disable,
+ .is_enabled = rockchip_rk3066_pll_is_enabled,
+};
+
+static const struct clk_ops rockchip_rk3066_pll_clk_ops = {
+ .recalc_rate = rockchip_rk3066_pll_recalc_rate,
+ .round_rate = rockchip_pll_round_rate,
+ .set_rate = rockchip_rk3066_pll_set_rate,
+ .enable = rockchip_rk3066_pll_enable,
+ .disable = rockchip_rk3066_pll_disable,
+ .is_enabled = rockchip_rk3066_pll_is_enabled,
+};
+
+/*
+ * Common registering of pll clocks
+ */
+
+struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
+ const char *name, const char **parent_names, u8 num_parents,
+ void __iomem *base, int con_offset, int grf_lock_offset,
+ int lock_shift, int mode_offset, int mode_shift,
+ struct rockchip_pll_rate_table *rate_table,
+ spinlock_t *lock)
+{
+ const char *pll_parents[3];
+ struct clk_init_data init;
+ struct rockchip_clk_pll *pll;
+ struct clk_mux *pll_mux;
+ struct clk *pll_clk, *mux_clk;
+ char pll_name[20];
+ int ret;
+
+ if (num_parents != 2) {
+ pr_err("%s: needs two parent clocks\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* name the actual pll */
+ snprintf(pll_name, sizeof(pll_name), "pll_%s", name);
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = pll_name;
+
+ /* keep all plls untouched for now */
+ init.flags = CLK_IGNORE_UNUSED;
+
+ init.parent_names = &parent_names[0];
+ init.num_parents = 1;
+
+ if (rate_table) {
+ int len;
+
+ /* find count of rates in rate_table */
+ for (len = 0; rate_table[len].rate != 0; )
+ len++;
+
+ pll->rate_count = len;
+ pll->rate_table = kmemdup(rate_table,
+ pll->rate_count *
+ sizeof(struct rockchip_pll_rate_table),
+ GFP_KERNEL);
+ WARN(!pll->rate_table,
+ "%s: could not allocate rate table for %s\n",
+ __func__, name);
+ }
+
+ switch (pll_type) {
+ case pll_rk3066:
+ if (!pll->rate_table)
+ init.ops = &rockchip_rk3066_pll_clk_norate_ops;
+ else
+ init.ops = &rockchip_rk3066_pll_clk_ops;
+ break;
+ default:
+ pr_warn("%s: Unknown pll type for pll clk %s\n",
+ __func__, name);
+ }
+
+ pll->hw.init = &init;
+ pll->type = pll_type;
+ pll->reg_base = base + con_offset;
+ pll->lock_offset = grf_lock_offset;
+ pll->lock_shift = lock_shift;
+ pll->lock = lock;
+ pll->clk_nb.notifier_call = rockchip_pll_notifier_cb;
+
+ pll_clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(pll_clk)) {
+ pr_err("%s: failed to register pll clock %s : %ld\n",
+ __func__, name, PTR_ERR(pll_clk));
+ mux_clk = pll_clk;
+ goto err_pll;
+ }
+
+ ret = clk_notifier_register(pll_clk, &pll->clk_nb);
+ if (ret) {
+ pr_err("%s: failed to register clock notifier for %s : %d\n",
+ __func__, name, ret);
+ mux_clk = ERR_PTR(ret);
+ goto err_pll_notifier;
+ }
+
+ /* create the mux on top of the real pll */
+ pll->pll_mux_ops = &clk_mux_ops;
+ pll_mux = &pll->pll_mux;
+
+ /* the actual muxing is xin24m, pll-output, xin32k */
+ pll_parents[0] = parent_names[0];
+ pll_parents[1] = pll_name;
+ pll_parents[2] = parent_names[1];
+
+ init.name = name;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.ops = pll->pll_mux_ops;
+ init.parent_names = pll_parents;
+ init.num_parents = ARRAY_SIZE(pll_parents);
+
+ pll_mux->reg = base + mode_offset;
+ pll_mux->shift = mode_shift;
+ pll_mux->mask = PLL_MODE_MASK;
+ pll_mux->flags = 0;
+ pll_mux->lock = lock;
+ pll_mux->hw.init = &init;
+
+ if (pll_type == pll_rk3066)
+ pll_mux->flags |= CLK_MUX_HIWORD_MASK;
+
+ mux_clk = clk_register(NULL, &pll_mux->hw);
+ if (IS_ERR(mux_clk))
+ goto err_mux;
+
+ return mux_clk;
+
+err_mux:
+ ret = clk_notifier_unregister(pll_clk, &pll->clk_nb);
+ if (ret) {
+ pr_err("%s: could not unregister clock notifier in error path : %d\n",
+ __func__, ret);
+ return mux_clk;
+ }
+err_pll_notifier:
+ clk_unregister(pll_clk);
+err_pll:
+ kfree(pll);
+ return mux_clk;
+}
diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c
new file mode 100644
index 0000000..a83a6d8
--- /dev/null
+++ b/drivers/clk/rockchip/clk-rk3188.c
@@ -0,0 +1,672 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/rk3188-cru-common.h>
+#include "clk.h"
+
+#define RK3188_GRF_SOC_STATUS 0xac
+
+enum rk3188_plls {
+ apll, cpll, dpll, gpll,
+};
+
+struct rockchip_pll_rate_table rk3188_pll_rates[] = {
+ RK3066_PLL_RATE(2208000000, 1, 92, 1),
+ RK3066_PLL_RATE(2184000000, 1, 91, 1),
+ RK3066_PLL_RATE(2160000000, 1, 90, 1),
+ RK3066_PLL_RATE(2136000000, 1, 89, 1),
+ RK3066_PLL_RATE(2112000000, 1, 88, 1),
+ RK3066_PLL_RATE(2088000000, 1, 87, 1),
+ RK3066_PLL_RATE(2064000000, 1, 86, 1),
+ RK3066_PLL_RATE(2040000000, 1, 85, 1),
+ RK3066_PLL_RATE(2016000000, 1, 84, 1),
+ RK3066_PLL_RATE(1992000000, 1, 83, 1),
+ RK3066_PLL_RATE(1968000000, 1, 82, 1),
+ RK3066_PLL_RATE(1944000000, 1, 81, 1),
+ RK3066_PLL_RATE(1920000000, 1, 80, 1),
+ RK3066_PLL_RATE(1896000000, 1, 79, 1),
+ RK3066_PLL_RATE(1872000000, 1, 78, 1),
+ RK3066_PLL_RATE(1848000000, 1, 77, 1),
+ RK3066_PLL_RATE(1824000000, 1, 76, 1),
+ RK3066_PLL_RATE(1800000000, 1, 75, 1),
+ RK3066_PLL_RATE(1776000000, 1, 74, 1),
+ RK3066_PLL_RATE(1752000000, 1, 73, 1),
+ RK3066_PLL_RATE(1728000000, 1, 72, 1),
+ RK3066_PLL_RATE(1704000000, 1, 71, 1),
+ RK3066_PLL_RATE(1680000000, 1, 70, 1),
+ RK3066_PLL_RATE(1656000000, 1, 69, 1),
+ RK3066_PLL_RATE(1632000000, 1, 68, 1),
+ RK3066_PLL_RATE(1608000000, 1, 67, 1),
+ RK3066_PLL_RATE(1560000000, 1, 65, 1),
+ RK3066_PLL_RATE(1512000000, 1, 63, 1),
+ RK3066_PLL_RATE(1488000000, 1, 62, 1),
+ RK3066_PLL_RATE(1464000000, 1, 61, 1),
+ RK3066_PLL_RATE(1440000000, 1, 60, 1),
+ RK3066_PLL_RATE(1416000000, 1, 59, 1),
+ RK3066_PLL_RATE(1392000000, 1, 58, 1),
+ RK3066_PLL_RATE(1368000000, 1, 57, 1),
+ RK3066_PLL_RATE(1344000000, 1, 56, 1),
+ RK3066_PLL_RATE(1320000000, 1, 55, 1),
+ RK3066_PLL_RATE(1296000000, 1, 54, 1),
+ RK3066_PLL_RATE(1272000000, 1, 53, 1),
+ RK3066_PLL_RATE(1248000000, 1, 52, 1),
+ RK3066_PLL_RATE(1224000000, 1, 51, 1),
+ RK3066_PLL_RATE(1200000000, 1, 50, 1),
+ RK3066_PLL_RATE(1188000000, 2, 99, 1),
+ RK3066_PLL_RATE(1176000000, 1, 49, 1),
+ RK3066_PLL_RATE(1128000000, 1, 47, 1),
+ RK3066_PLL_RATE(1104000000, 1, 46, 1),
+ RK3066_PLL_RATE(1008000000, 1, 84, 2),
+ RK3066_PLL_RATE( 912000000, 1, 76, 2),
+ RK3066_PLL_RATE( 891000000, 8, 594, 2),
+ RK3066_PLL_RATE( 888000000, 1, 74, 2),
+ RK3066_PLL_RATE( 816000000, 1, 68, 2),
+ RK3066_PLL_RATE( 798000000, 2, 133, 2),
+ RK3066_PLL_RATE( 792000000, 1, 66, 2),
+ RK3066_PLL_RATE( 768000000, 1, 64, 2),
+ RK3066_PLL_RATE( 742500000, 8, 495, 2),
+ RK3066_PLL_RATE( 696000000, 1, 58, 2),
+ RK3066_PLL_RATE( 600000000, 1, 50, 2),
+ RK3066_PLL_RATE( 594000000, 2, 198, 4),
+ RK3066_PLL_RATE( 552000000, 1, 46, 2),
+ RK3066_PLL_RATE( 504000000, 1, 84, 4),
+ RK3066_PLL_RATE( 456000000, 1, 76, 4),
+ RK3066_PLL_RATE( 408000000, 1, 68, 4),
+ RK3066_PLL_RATE( 384000000, 2, 128, 4),
+ RK3066_PLL_RATE( 360000000, 1, 60, 4),
+ RK3066_PLL_RATE( 312000000, 1, 52, 4),
+ RK3066_PLL_RATE( 300000000, 1, 50, 4),
+ RK3066_PLL_RATE( 297000000, 2, 198, 8),
+ RK3066_PLL_RATE( 252000000, 1, 84, 8),
+ RK3066_PLL_RATE( 216000000, 1, 72, 8),
+ RK3066_PLL_RATE( 148500000, 2, 99, 8),
+ RK3066_PLL_RATE( 126000000, 1, 84, 16),
+ RK3066_PLL_RATE( 48000000, 1, 64, 32),
+ { /* sentinel */ },
+};
+
+PNAME(mux_pll_p) = { "xin24m", "xin32k" };
+PNAME(mux_armclk_p) = { "apll", "gpll_armclk" };
+PNAME(mux_ddrphy_p) = { "dpll", "gpll_ddr" };
+PNAME(mux_pll_src_gpll_cpll_p) = { "gpll", "cpll" };
+PNAME(mux_pll_src_cpll_gpll_p) = { "cpll", "gpll" };
+PNAME(mux_aclk_cpu_p) = { "apll", "gpll" };
+PNAME(mux_sclk_cif0_p) = { "cif0_pre", "xin24m" };
+PNAME(mux_sclk_i2s0_p) = { "i2s0_pre", "i2s0_frac", "xin12m" };
+PNAME(mux_sclk_spdif_p) = { "spdif_src", "spdif_frac", "xin12m" };
+PNAME(mux_sclk_uart0_p) = { "uart0_pre", "uart0_frac", "xin24m" };
+PNAME(mux_sclk_uart1_p) = { "uart1_pre", "uart1_frac", "xin24m" };
+PNAME(mux_sclk_uart2_p) = { "uart2_pre", "uart2_frac", "xin24m" };
+PNAME(mux_sclk_uart3_p) = { "uart3_pre", "uart3_frac", "xin24m" };
+PNAME(mux_sclk_hsadc_p) = { "hsadc_src", "hsadc_frac", "ext_hsadc" };
+PNAME(mux_mac_p) = { "gpll", "dpll" };
+PNAME(mux_sclk_macref_p) = { "mac_src", "ext_rmii" };
+
+static struct rockchip_pll_clock rk3188_pll_clks[] __initdata = {
+ [apll] = PLL(pll_rk3066, PLL_APLL, "apll", mux_pll_p, 0, RK2928_PLL_CON(0),
+ RK2928_MODE_CON, 0, 6, rk3188_pll_rates),
+ [dpll] = PLL(pll_rk3066, PLL_DPLL, "dpll", mux_pll_p, 0, RK2928_PLL_CON(4),
+ RK2928_MODE_CON, 4, 5, NULL),
+ [cpll] = PLL(pll_rk3066, PLL_CPLL, "cpll", mux_pll_p, 0, RK2928_PLL_CON(8),
+ RK2928_MODE_CON, 8, 7, rk3188_pll_rates),
+ [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK2928_PLL_CON(12),
+ RK2928_MODE_CON, 12, 8, rk3188_pll_rates),
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+
+/* 2 ^ (val + 1) */
+static struct clk_div_table div_core_peri_t[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 4 },
+ { .val = 2, .div = 8 },
+ { .val = 3, .div = 16 },
+ { /* sentinel */ },
+};
+
+static struct rockchip_clk_branch common_clk_branches[] __initdata = {
+ /*
+ * Clock-Architecture Diagram 2
+ */
+
+ GATE(0, "gpll_armclk", "gpll", 0, RK2928_CLKGATE_CON(0), 1, GFLAGS),
+
+ /* these two are set by the cpuclk and should not be changed */
+ COMPOSITE_NOMUX_DIVTBL(CORE_PERI, "core_peri", "armclk", 0,
+ RK2928_CLKSEL_CON(0), 6, 2, DFLAGS | CLK_DIVIDER_READ_ONLY,
+ div_core_peri_t, RK2928_CLKGATE_CON(0), 0, GFLAGS),
+
+ COMPOSITE(0, "aclk_vepu", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(32), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK2928_CLKGATE_CON(3), 9, GFLAGS),
+ GATE(0, "hclk_vepu", "aclk_vepu", 0,
+ RK2928_CLKGATE_CON(3), 10, GFLAGS),
+ COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(32), 15, 1, MFLAGS, 8, 5, DFLAGS,
+ RK2928_CLKGATE_CON(3), 11, GFLAGS),
+ GATE(0, "hclk_vdpu", "aclk_vdpu", 0,
+ RK2928_CLKGATE_CON(3), 12, GFLAGS),
+
+ GATE(0, "gpll_ddr", "gpll", 0,
+ RK2928_CLKGATE_CON(1), 7, GFLAGS),
+ COMPOSITE(0, "ddrphy", mux_ddrphy_p, 0,
+ RK2928_CLKSEL_CON(26), 8, 1, MFLAGS, 0, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK2928_CLKGATE_CON(0), 2, GFLAGS),
+
+ GATE(0, "aclk_cpu", "aclk_cpu_pre", 0,
+ RK2928_CLKGATE_CON(0), 3, GFLAGS),
+
+ DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0,
+ RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+ GATE(0, "atclk_cpu", "pclk_cpu_pre", 0,
+ RK2928_CLKGATE_CON(0), 6, GFLAGS),
+ GATE(0, "pclk_cpu", "pclk_cpu_pre", 0,
+ RK2928_CLKGATE_CON(0), 5, GFLAGS),
+ DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0,
+ RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+ COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0,
+ RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK2928_CLKGATE_CON(4), 9, GFLAGS),
+ GATE(0, "hclk_cpu", "hclk_cpu_pre", 0,
+ RK2928_CLKGATE_CON(0), 4, GFLAGS),
+
+ COMPOSITE(0, "aclk_lcdc0_pre", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(31), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK2928_CLKGATE_CON(3), 0, GFLAGS),
+ COMPOSITE(0, "aclk_lcdc1_pre", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(31), 15, 1, MFLAGS, 8, 5, DFLAGS,
+ RK2928_CLKGATE_CON(1), 4, GFLAGS),
+
+ GATE(0, "aclk_peri", "aclk_peri_pre", 0,
+ RK2928_CLKGATE_CON(2), 1, GFLAGS),
+ COMPOSITE_NOMUX(0, "hclk_peri", "aclk_peri_pre", 0,
+ RK2928_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK2928_CLKGATE_CON(2), 2, GFLAGS),
+ COMPOSITE_NOMUX(0, "pclk_peri", "aclk_peri_pre", 0,
+ RK2928_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK2928_CLKGATE_CON(2), 3, GFLAGS),
+
+ MUX(0, "cif_src", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(29), 0, 1, MFLAGS),
+ COMPOSITE_NOMUX(0, "cif0_pre", "cif_src", 0,
+ RK2928_CLKSEL_CON(29), 1, 5, DFLAGS,
+ RK2928_CLKGATE_CON(3), 7, GFLAGS),
+ MUX(SCLK_CIF0, "sclk_cif0", mux_sclk_cif0_p, 0,
+ RK2928_CLKSEL_CON(29), 7, 1, MFLAGS),
+
+ GATE(0, "pclkin_cif0", "ext_cif0", 0,
+ RK2928_CLKGATE_CON(3), 3, GFLAGS),
+
+ /*
+ * the 480m are generated inside the usb block from these clocks,
+ * but they are also a source for the hsicphy clock.
+ */
+ GATE(SCLK_OTGPHY0, "sclk_otgphy0", "usb480m", 0,
+ RK2928_CLKGATE_CON(1), 5, GFLAGS),
+ GATE(SCLK_OTGPHY1, "sclk_otgphy1", "usb480m", 0,
+ RK2928_CLKGATE_CON(1), 6, GFLAGS),
+
+ COMPOSITE(0, "mac_src", mux_mac_p, 0,
+ RK2928_CLKSEL_CON(21), 0, 1, MFLAGS, 8, 5, DFLAGS,
+ RK2928_CLKGATE_CON(2), 5, GFLAGS),
+ MUX(SCLK_MAC, "sclk_macref", mux_sclk_macref_p, CLK_SET_RATE_PARENT,
+ RK2928_CLKSEL_CON(21), 4, 1, MFLAGS),
+ GATE(0, "sclk_mac_lbtest", "sclk_macref",
+ RK2928_CLKGATE_CON(2), 12, 0, GFLAGS),
+
+ COMPOSITE(0, "hsadc_src", mux_pll_src_gpll_cpll_p, 0,
+ RK2928_CLKSEL_CON(22), 0, 1, MFLAGS, 8, 8, DFLAGS,
+ RK2928_CLKGATE_CON(2), 6, GFLAGS),
+ COMPOSITE_FRAC(0, "hsadc_frac", "hsadc_src",
+ RK2928_CLKSEL_CON(23), 0,
+ RK2928_CLKGATE_CON(2), 7, 0, GFLAGS),
+ MUX(SCLK_HSADC, "sclk_hsadc", mux_sclk_hsadc_p, 0,
+ RK2928_CLKSEL_CON(22), 4, 2, MFLAGS),
+
+ COMPOSITE_NOMUX(SCLK_SARADC, "sclk_saradc", "xin24m", 0,
+ RK2928_CLKSEL_CON(24), 8, 8, DFLAGS,
+ RK2928_CLKGATE_CON(2), 8, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 4
+ */
+
+ GATE(SCLK_SMC, "sclk_smc", "hclk_peri",
+ RK2928_CLKGATE_CON(2), 4, 0, GFLAGS),
+
+ COMPOSITE_NOMUX(SCLK_SPI0, "sclk_spi0", "pclk_peri", 0,
+ RK2928_CLKSEL_CON(25), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(2), 9, GFLAGS),
+ COMPOSITE_NOMUX(SCLK_SPI1, "sclk_spi1", "pclk_peri", 0,
+ RK2928_CLKSEL_CON(25), 8, 7, DFLAGS,
+ RK2928_CLKGATE_CON(2), 10, GFLAGS),
+
+ COMPOSITE_NOMUX(SCLK_SDMMC, "sclk_sdmmc", "hclk_peri", 0,
+ RK2928_CLKSEL_CON(11), 0, 6, DFLAGS,
+ RK2928_CLKGATE_CON(2), 11, GFLAGS),
+ COMPOSITE_NOMUX(SCLK_SDIO, "sclk_sdio", "hclk_peri", 0,
+ RK2928_CLKSEL_CON(12), 0, 6, DFLAGS,
+ RK2928_CLKGATE_CON(2), 13, GFLAGS),
+ COMPOSITE_NOMUX(SCLK_EMMC, "sclk_emmc", "hclk_peri", 0,
+ RK2928_CLKSEL_CON(12), 8, 6, DFLAGS,
+ RK2928_CLKGATE_CON(2), 14, GFLAGS),
+
+ MUX(0, "uart_src", mux_pll_src_gpll_cpll_p, 0,
+ RK2928_CLKSEL_CON(12), 15, 1, MFLAGS),
+ COMPOSITE_NOMUX(0, "uart0_pre", "uart_src", 0,
+ RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(1), 8, GFLAGS),
+ COMPOSITE_FRAC(0, "uart0_frac", "uart0_pre", 0,
+ RK2928_CLKSEL_CON(17), 0,
+ RK2928_CLKGATE_CON(1), 9, GFLAGS),
+ MUX(SCLK_UART0, "sclk_uart0", mux_sclk_uart0_p, 0,
+ RK2928_CLKSEL_CON(13), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "uart1_pre", "uart_src", 0,
+ RK2928_CLKSEL_CON(14), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(1), 10, GFLAGS),
+ COMPOSITE_FRAC(0, "uart1_frac", "uart1_pre", 0,
+ RK2928_CLKSEL_CON(18), 0,
+ RK2928_CLKGATE_CON(1), 11, GFLAGS),
+ MUX(SCLK_UART1, "sclk_uart1", mux_sclk_uart1_p, 0,
+ RK2928_CLKSEL_CON(14), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "uart2_pre", "uart_src", 0,
+ RK2928_CLKSEL_CON(15), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(1), 12, GFLAGS),
+ COMPOSITE_FRAC(0, "uart2_frac", "uart2_pre", 0,
+ RK2928_CLKSEL_CON(19), 0,
+ RK2928_CLKGATE_CON(1), 13, GFLAGS),
+ MUX(SCLK_UART2, "sclk_uart2", mux_sclk_uart2_p, 0,
+ RK2928_CLKSEL_CON(15), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "uart3_pre", "uart_src", 0,
+ RK2928_CLKSEL_CON(16), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(1), 14, GFLAGS),
+ COMPOSITE_FRAC(0, "uart3_frac", "uart3_pre", 0,
+ RK2928_CLKSEL_CON(20), 0,
+ RK2928_CLKGATE_CON(1), 15, GFLAGS),
+ MUX(SCLK_UART3, "sclk_uart3", mux_sclk_uart3_p, 0,
+ RK2928_CLKSEL_CON(16), 8, 2, MFLAGS),
+
+ GATE(SCLK_JTAG, "jtag", "ext_jtag", 0, RK2928_CLKGATE_CON(1), 3, GFLAGS),
+
+ GATE(SCLK_TIMER0, "timer0", "xin24m", 0, RK2928_CLKGATE_CON(1), 0, GFLAGS),
+ GATE(SCLK_TIMER1, "timer1", "xin24m", 0, RK2928_CLKGATE_CON(1), 1, GFLAGS),
+
+ /* clk_core_pre gates */
+ GATE(0, "core_dbg", "armclk", 0, RK2928_CLKGATE_CON(9), 0, GFLAGS),
+
+ /* aclk_cpu gates */
+ GATE(ACLK_DMA1, "aclk_dma1", "aclk_cpu", 0, RK2928_CLKGATE_CON(5), 0, GFLAGS),
+ GATE(0, "aclk_intmem", "aclk_cpu", 0, RK2928_CLKGATE_CON(4), 12, GFLAGS),
+ GATE(0, "aclk_strc_sys", "aclk_cpu", 0, RK2928_CLKGATE_CON(4), 10, GFLAGS),
+
+ /* hclk_cpu gates */
+ GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", 0, RK2928_CLKGATE_CON(5), 6, GFLAGS),
+ GATE(HCLK_I2S0, "hclk_i2s0", "hclk_cpu", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS),
+ GATE(HCLK_SPDIF, "hclk_spdif", "hclk_cpu", 0, RK2928_CLKGATE_CON(7), 1, GFLAGS),
+ GATE(0, "hclk_cpubus", "hclk_cpu", 0, RK2928_CLKGATE_CON(4), 8, GFLAGS),
+ /* hclk_ahb2apb is part of a clk branch */
+ GATE(0, "hclk_vio_bus", "hclk_cpu", 0, RK2928_CLKGATE_CON(6), 12, GFLAGS),
+ GATE(HCLK_LCDC0, "hclk_lcdc0", "hclk_cpu", 0, RK2928_CLKGATE_CON(6), 1, GFLAGS),
+ GATE(HCLK_LCDC1, "hclk_lcdc1", "aclk_cpu", 0, RK2928_CLKGATE_CON(6), 2, GFLAGS),
+ GATE(HCLK_CIF0, "hclk_cif0", "hclk_cpu", 0, RK2928_CLKGATE_CON(6), 4, GFLAGS),
+ GATE(HCLK_IPP, "hclk_ipp", "hclk_cpu", 0, RK2928_CLKGATE_CON(6), 9, GFLAGS),
+ GATE(HCLK_RGA, "hclk_rga", "hclk_cpu", 0, RK2928_CLKGATE_CON(6), 10, GFLAGS),
+
+ /* hclk_peri gates */
+ GATE(0, "hclk_peri_axi_matrix", "hclk_peri", 0, RK2928_CLKGATE_CON(4), 0, GFLAGS),
+ GATE(0, "hclk_peri_ahb_arbi", "hclk_peri", 0, RK2928_CLKGATE_CON(4), 6, GFLAGS),
+ GATE(0, "hclk_emem_peri", "hclk_peri", 0, RK2928_CLKGATE_CON(4), 7, GFLAGS),
+ GATE(HCLK_EMAC, "hclk_emac", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0, GFLAGS),
+ GATE(HCLK_NANDC0, "hclk_nandc0", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 9, GFLAGS),
+ GATE(0, "hclk_usb_peri", "hclk_peri", 0, RK2928_CLKGATE_CON(4), 5, GFLAGS),
+ GATE(HCLK_OTG0, "hclk_usbotg0", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 13, GFLAGS),
+ GATE(HCLK_HSADC, "hclk_hsadc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 5, GFLAGS),
+ GATE(HCLK_PIDF, "hclk_pidfilter", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 6, GFLAGS),
+ GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS),
+ GATE(HCLK_SDIO, "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS),
+ GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 12, GFLAGS),
+
+ /* aclk_lcdc0_pre gates */
+ GATE(0, "aclk_vio0", "aclk_lcdc0_pre", 0, RK2928_CLKGATE_CON(6), 13, GFLAGS),
+ GATE(ACLK_LCDC0, "aclk_lcdc0", "aclk_vio0", 0, RK2928_CLKGATE_CON(6), 0, GFLAGS),
+ GATE(ACLK_CIF0, "aclk_cif0", "aclk_vio0", 0, RK2928_CLKGATE_CON(6), 5, GFLAGS),
+ GATE(ACLK_IPP, "aclk_ipp", "aclk_vio0", 0, RK2928_CLKGATE_CON(6), 8, GFLAGS),
+
+ /* aclk_lcdc1_pre gates */
+ GATE(0, "aclk_vio1", "aclk_lcdc1_pre", 0, RK2928_CLKGATE_CON(9), 5, GFLAGS),
+ GATE(ACLK_LCDC1, "aclk_lcdc1", "aclk_vio1", 0, RK2928_CLKGATE_CON(6), 3, GFLAGS),
+ GATE(ACLK_RGA, "aclk_rga", "aclk_vio1", 0, RK2928_CLKGATE_CON(6), 11, GFLAGS),
+
+ /* atclk_cpu gates */
+ GATE(0, "atclk", "atclk_cpu", 0, RK2928_CLKGATE_CON(9), 3, GFLAGS),
+ GATE(0, "trace", "atclk_cpu", 0, RK2928_CLKGATE_CON(9), 2, GFLAGS),
+
+ /* pclk_cpu gates */
+ GATE(PCLK_PWM01, "pclk_pwm01", "pclk_cpu", 0, RK2928_CLKGATE_CON(7), 10, GFLAGS),
+ GATE(PCLK_TIMER0, "pclk_timer0", "pclk_cpu", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS),
+ GATE(PCLK_I2C0, "pclk_i2c0", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS),
+ GATE(PCLK_I2C1, "pclk_i2c1", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS),
+ GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 9, GFLAGS),
+ GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS),
+ GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS),
+ GATE(PCLK_EFUSE, "pclk_efuse", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 2, GFLAGS),
+ GATE(PCLK_TZPC, "pclk_tzpc", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 3, GFLAGS),
+ GATE(0, "pclk_ddrupctl", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 7, GFLAGS),
+ GATE(0, "pclk_ddrpubl", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 6, GFLAGS),
+ GATE(0, "pclk_dbg", "pclk_cpu", 0, RK2928_CLKGATE_CON(9), 1, GFLAGS),
+ GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 4, GFLAGS),
+ GATE(PCLK_PMU, "pclk_pmu", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 5, GFLAGS),
+
+ /* aclk_peri */
+ GATE(ACLK_DMA2, "aclk_dma2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS),
+ GATE(ACLK_SMC, "aclk_smc", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 8, GFLAGS),
+ GATE(0, "aclk_peri_niu", "aclk_peri", 0, RK2928_CLKGATE_CON(4), 4, GFLAGS),
+ GATE(0, "aclk_cpu_peri", "aclk_peri", 0, RK2928_CLKGATE_CON(4), 2, GFLAGS),
+ GATE(0, "aclk_peri_axi_matrix", "aclk_peri", 0, RK2928_CLKGATE_CON(4), 3, GFLAGS),
+
+ /* pclk_peri gates */
+ GATE(0, "pclk_peri_axi_matrix", "pclk_peri", 0, RK2928_CLKGATE_CON(4), 1, GFLAGS),
+ GATE(PCLK_PWM23, "pclk_pwm23", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 11, GFLAGS),
+ GATE(PCLK_WDT, "pclk_wdt", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
+ GATE(PCLK_SPI0, "pclk_spi0", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 12, GFLAGS),
+ GATE(PCLK_SPI1, "pclk_spi1", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 13, GFLAGS),
+ GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 2, GFLAGS),
+ GATE(PCLK_UART3, "pclk_uart3", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 3, GFLAGS),
+ GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6, GFLAGS),
+ GATE(PCLK_I2C3, "pclk_i2c3", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 7, GFLAGS),
+ GATE(PCLK_I2C4, "pclk_i2c4", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 8, GFLAGS),
+ GATE(PCLK_GPIO3, "pclk_gpio3", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 12, GFLAGS),
+ GATE(PCLK_SARADC, "pclk_saradc", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 14, GFLAGS),
+};
+
+PNAME(mux_rk3066_lcdc0_p) = { "dclk_lcdc0_src", "xin27m" };
+PNAME(mux_rk3066_lcdc1_p) = { "dclk_lcdc1_src", "xin27m" };
+PNAME(mux_sclk_cif1_p) = { "cif1_pre", "xin24m" };
+PNAME(mux_sclk_i2s1_p) = { "i2s1_pre", "i2s1_frac", "xin12m" };
+PNAME(mux_sclk_i2s2_p) = { "i2s2_pre", "i2s2_frac", "xin12m" };
+
+static struct clk_div_table div_aclk_cpu_t[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 3 },
+ { .val = 3, .div = 4 },
+ { .val = 4, .div = 8 },
+ { /* sentinel */ },
+};
+
+static struct rockchip_clk_branch rk3066a_clk_branches[] __initdata = {
+ COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0,
+ RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 0, 5, DFLAGS),
+ DIVTBL(0, "aclk_cpu_pre", "armclk", 0,
+ RK2928_CLKSEL_CON(1), 0, 3, DFLAGS, div_aclk_cpu_t),
+
+ GATE(CORE_L2C, "core_l2c", "aclk_cpu", 0,
+ RK2928_CLKGATE_CON(9), 4, GFLAGS),
+
+ COMPOSITE(0, "aclk_peri_pre", mux_pll_src_gpll_cpll_p, 0,
+ RK2928_CLKSEL_CON(10), 15, 1, MFLAGS, 0, 5, DFLAGS,
+ RK2928_CLKGATE_CON(2), 0, GFLAGS),
+
+ COMPOSITE(0, "dclk_lcdc0_src", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(27), 0, 1, MFLAGS, 8, 8, DFLAGS,
+ RK2928_CLKGATE_CON(3), 1, GFLAGS),
+ MUX(DCLK_LCDC0, "dclk_lcdc0", mux_rk3066_lcdc0_p, 0,
+ RK2928_CLKSEL_CON(27), 4, 1, MFLAGS),
+ COMPOSITE(0, "dclk_lcdc1_src", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(28), 0, 1, MFLAGS, 8, 8, DFLAGS,
+ RK2928_CLKGATE_CON(3), 2, GFLAGS),
+ MUX(DCLK_LCDC1, "dclk_lcdc1", mux_rk3066_lcdc1_p, 0,
+ RK2928_CLKSEL_CON(28), 4, 1, MFLAGS),
+
+ COMPOSITE_NOMUX(0, "cif1_pre", "cif_src", 0,
+ RK2928_CLKSEL_CON(29), 8, 5, DFLAGS,
+ RK2928_CLKGATE_CON(3), 8, GFLAGS),
+ MUX(SCLK_CIF1, "sclk_cif1", mux_sclk_cif1_p, 0,
+ RK2928_CLKSEL_CON(29), 15, 1, MFLAGS),
+
+ GATE(0, "pclkin_cif1", "ext_cif1", 0,
+ RK2928_CLKGATE_CON(3), 4, GFLAGS),
+
+ COMPOSITE(0, "aclk_gpu_src", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(33), 8, 1, MFLAGS, 0, 5, DFLAGS,
+ RK2928_CLKGATE_CON(3), 13, GFLAGS),
+ GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_src", 0,
+ RK2928_CLKGATE_CON(5), 15, GFLAGS),
+
+ GATE(SCLK_TIMER2, "timer2", "xin24m", 0,
+ RK2928_CLKGATE_CON(3), 2, GFLAGS),
+
+ COMPOSITE_NOMUX(0, "sclk_tsadc", "xin24m", 0,
+ RK2928_CLKSEL_CON(34), 0, 16, DFLAGS,
+ RK2928_CLKGATE_CON(2), 15, GFLAGS),
+
+ MUX(0, "i2s_src", mux_pll_src_gpll_cpll_p, 0,
+ RK2928_CLKSEL_CON(2), 15, 1, MFLAGS),
+ COMPOSITE_NOMUX(0, "i2s0_pre", "i2s_src", 0,
+ RK2928_CLKSEL_CON(2), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(0), 7, GFLAGS),
+ COMPOSITE_FRAC(0, "i2s0_frac", "i2s0_pre", 0,
+ RK2928_CLKSEL_CON(6), 0,
+ RK2928_CLKGATE_CON(0), 8, GFLAGS),
+ MUX(SCLK_I2S0, "sclk_i2s0", mux_sclk_i2s0_p, 0,
+ RK2928_CLKSEL_CON(2), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "i2s1_pre", "i2s_src", 0,
+ RK2928_CLKSEL_CON(3), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(0), 9, GFLAGS),
+ COMPOSITE_FRAC(0, "i2s1_frac", "i2s1_pre", 0,
+ RK2928_CLKSEL_CON(7), 0,
+ RK2928_CLKGATE_CON(0), 10, GFLAGS),
+ MUX(SCLK_I2S1, "sclk_i2s1", mux_sclk_i2s1_p, 0,
+ RK2928_CLKSEL_CON(3), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "i2s2_pre", "i2s_src", 0,
+ RK2928_CLKSEL_CON(4), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(0), 11, GFLAGS),
+ COMPOSITE_FRAC(0, "i2s2_frac", "i2s2_pre", 0,
+ RK2928_CLKSEL_CON(8), 0,
+ RK2928_CLKGATE_CON(0), 12, GFLAGS),
+ MUX(SCLK_I2S2, "sclk_i2s2", mux_sclk_i2s2_p, 0,
+ RK2928_CLKSEL_CON(4), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "spdif_pre", "i2s_src", 0,
+ RK2928_CLKSEL_CON(5), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(0), 13, GFLAGS),
+ COMPOSITE_FRAC(0, "spdif_frac", "spdif_pll", 0,
+ RK2928_CLKSEL_CON(9), 0,
+ RK2928_CLKGATE_CON(0), 14, GFLAGS),
+ MUX(SCLK_SPDIF, "sclk_spdif", mux_sclk_spdif_p, 0,
+ RK2928_CLKSEL_CON(5), 8, 2, MFLAGS),
+
+ GATE(HCLK_I2S1, "hclk_i2s1", "hclk_cpu", 0, RK2928_CLKGATE_CON(7), 3, GFLAGS),
+ GATE(HCLK_I2S2, "hclk_i2s2", "hclk_cpu", 0, RK2928_CLKGATE_CON(7), 4, GFLAGS),
+ GATE(0, "hclk_cif1", "hclk_cpu", 0, RK2928_CLKGATE_CON(6), 6, GFLAGS),
+ GATE(0, "hclk_hdmi", "hclk_cpu", 0, RK2928_CLKGATE_CON(4), 14, GFLAGS),
+
+ GATE(HCLK_OTG1, "hclk_usbotg1", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS),
+
+ GATE(0, "aclk_cif1", "aclk_vio1", 0, RK2928_CLKGATE_CON(6), 7, GFLAGS),
+
+ GATE(PCLK_TIMER1, "pclk_timer1", "pclk_cpu", 0, RK2928_CLKGATE_CON(7), 8, GFLAGS),
+ GATE(PCLK_TIMER2, "pclk_timer2", "pclk_cpu", 0, RK2928_CLKGATE_CON(7), 9, GFLAGS),
+ GATE(PCLK_GPIO6, "pclk_gpio6", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 15, GFLAGS),
+ GATE(PCLK_UART0, "pclk_uart0", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
+ GATE(PCLK_UART1, "pclk_uart1", "pclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
+
+ GATE(PCLK_GPIO4, "pclk_gpio4", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 13, GFLAGS),
+ GATE(PCLK_TSADC, "pclk_tsadc", "pclk_peri", 0, RK2928_CLKGATE_CON(4), 13, GFLAGS),
+};
+
+static struct clk_div_table div_rk3188_aclk_core_t[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 3 },
+ { .val = 3, .div = 4 },
+ { .val = 4, .div = 8 },
+ { /* sentinel */ },
+};
+
+PNAME(mux_hsicphy_p) = { "sclk_otgphy0", "sclk_otgphy1",
+ "gpll", "cpll" };
+
+static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = {
+ COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0,
+ RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 9, 5, DFLAGS),
+ COMPOSITE_NOMUX_DIVTBL(0, "aclk_core", "armclk", 0,
+ RK2928_CLKSEL_CON(1), 3, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+ div_rk3188_aclk_core_t, RK2928_CLKGATE_CON(0), 7, GFLAGS),
+
+ /* do not source aclk_cpu_pre from the apll, to keep complexity down */
+ COMPOSITE_NOGATE(0, "aclk_cpu_pre", mux_aclk_cpu_p, CLK_SET_RATE_NO_REPARENT,
+ RK2928_CLKSEL_CON(0), 5, 1, MFLAGS, 0, 5, DFLAGS),
+
+ GATE(CORE_L2C, "core_l2c", "armclk", 0,
+ RK2928_CLKGATE_CON(9), 4, GFLAGS),
+
+ COMPOSITE(0, "aclk_peri_pre", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(10), 15, 1, MFLAGS, 0, 5, DFLAGS,
+ RK2928_CLKGATE_CON(2), 0, GFLAGS),
+
+ COMPOSITE(DCLK_LCDC0, "dclk_lcdc0", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(27), 0, 1, MFLAGS, 8, 8, DFLAGS,
+ RK2928_CLKGATE_CON(3), 1, GFLAGS),
+ COMPOSITE(DCLK_LCDC1, "dclk_lcdc1", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(28), 0, 1, MFLAGS, 8, 8, DFLAGS,
+ RK2928_CLKGATE_CON(3), 2, GFLAGS),
+
+ COMPOSITE(0, "aclk_gpu_src", mux_pll_src_cpll_gpll_p, 0,
+ RK2928_CLKSEL_CON(34), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK2928_CLKGATE_CON(3), 15, GFLAGS),
+ GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_src", 0,
+ RK2928_CLKGATE_CON(9), 7, GFLAGS),
+
+ GATE(SCLK_TIMER2, "timer2", "xin24m", 0, RK2928_CLKGATE_CON(3), 4, GFLAGS),
+ GATE(SCLK_TIMER3, "timer3", "xin24m", 0, RK2928_CLKGATE_CON(1), 2, GFLAGS),
+ GATE(SCLK_TIMER4, "timer4", "xin24m", 0, RK2928_CLKGATE_CON(3), 5, GFLAGS),
+ GATE(SCLK_TIMER5, "timer5", "xin24m", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
+ GATE(SCLK_TIMER6, "timer6", "xin24m", 0, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+
+ COMPOSITE_NODIV(0, "sclk_hsicphy_480m", mux_hsicphy_p, 0,
+ RK2928_CLKSEL_CON(30), 0, 2, DFLAGS,
+ RK2928_CLKGATE_CON(3), 6, GFLAGS),
+ DIV(0, "sclk_hsicphy_12m", "sclk_hsicphy_480m", 0,
+ RK2928_CLKGATE_CON(11), 8, 6, DFLAGS),
+
+ MUX(0, "i2s_src", mux_pll_src_gpll_cpll_p, 0,
+ RK2928_CLKSEL_CON(2), 15, 1, MFLAGS),
+ COMPOSITE_NOMUX(0, "i2s0_pre", "i2s_src", 0,
+ RK2928_CLKSEL_CON(3), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(0), 9, GFLAGS),
+ COMPOSITE_FRAC(0, "i2s0_frac", "i2s0_pre", 0,
+ RK2928_CLKSEL_CON(7), 0,
+ RK2928_CLKGATE_CON(0), 10, GFLAGS),
+ MUX(SCLK_I2S0, "sclk_i2s0", mux_sclk_i2s0_p, 0,
+ RK2928_CLKSEL_CON(3), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "spdif_pre", "i2s_src", 0,
+ RK2928_CLKSEL_CON(5), 0, 7, DFLAGS,
+ RK2928_CLKGATE_CON(13), 13, GFLAGS),
+ COMPOSITE_FRAC(0, "spdif_frac", "spdif_pll", 0,
+ RK2928_CLKSEL_CON(9), 0,
+ RK2928_CLKGATE_CON(0), 14, GFLAGS),
+ MUX(SCLK_SPDIF, "sclk_spdif", mux_sclk_spdif_p, 0,
+ RK2928_CLKSEL_CON(5), 8, 2, MFLAGS),
+
+ GATE(0, "hclk_imem0", "hclk_cpu", 0, RK2928_CLKGATE_CON(4), 14, GFLAGS),
+ GATE(0, "hclk_imem1", "hclk_cpu", 0, RK2928_CLKGATE_CON(4), 15, GFLAGS),
+
+ GATE(HCLK_OTG1, "hclk_usbotg1", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 3, GFLAGS),
+ GATE(HCLK_HSIC, "hclk_hsic", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 4, GFLAGS),
+
+ GATE(PCLK_TIMER3, "pclk_timer3", "pclk_cpu", 0, RK2928_CLKGATE_CON(7), 9, GFLAGS),
+
+ GATE(PCLK_UART0, "pclk_uart0", "hclk_ahb2apb", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
+ GATE(PCLK_UART1, "pclk_uart1", "hclk_ahb2apb", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
+
+ GATE(ACLK_GPS, "aclk_gps", "aclk_peri", 0, RK2928_CLKGATE_CON(8), 13, GFLAGS),
+};
+
+static void __init rk3188_common_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+ struct clk *clk;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("%s: could not map cru region\n", __func__);
+ return;
+ }
+
+ rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+
+ /* xin12m is created by an cru-internal divider */
+ clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
+ if (IS_ERR(clk))
+ pr_warn("%s: could not register clock xin12m: %ld\n",
+ __func__, PTR_ERR(clk));
+
+ clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
+ if (IS_ERR(clk))
+ pr_warn("%s: could not register clock usb480m: %ld\n",
+ __func__, PTR_ERR(clk));
+
+ rockchip_clk_register_plls(rk3188_pll_clks,
+ ARRAY_SIZE(rk3188_pll_clks),
+ RK3188_GRF_SOC_STATUS);
+ rockchip_clk_register_branches(common_clk_branches,
+ ARRAY_SIZE(common_clk_branches));
+
+ rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
+ ROCKCHIP_SOFTRST_HIWORD_MASK);
+}
+
+static void __init rk3066a_clk_init(struct device_node *np)
+{
+ rk3188_common_clk_init(np);
+ rockchip_clk_register_branches(rk3066a_clk_branches,
+ ARRAY_SIZE(rk3066a_clk_branches));
+}
+CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init);
+
+static void __init rk3188a_clk_init(struct device_node *np)
+{
+ rk3188_common_clk_init(np);
+ rockchip_clk_register_branches(rk3188_clk_branches,
+ ARRAY_SIZE(rk3188_clk_branches));
+}
+CLK_OF_DECLARE(rk3188a_cru, "rockchip,rk3188a-cru", rk3188a_clk_init);
+
+static void __init rk3188_clk_init(struct device_node *np)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rk3188_pll_clks); i++) {
+ struct rockchip_pll_clock *pll = &rk3188_pll_clks[i];
+ struct rockchip_pll_rate_table *rate;
+
+ if (!pll->rate_table)
+ continue;
+
+ rate = pll->rate_table;
+ while (rate->rate > 0) {
+ rate->bwadj = 0;
+ rate++;
+ }
+ }
+
+ rk3188a_clk_init(np);
+}
+CLK_OF_DECLARE(rk3188_cru, "rockchip,rk3188-cru", rk3188_clk_init);
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
new file mode 100644
index 0000000..0d8c6c5
--- /dev/null
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -0,0 +1,717 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include "clk.h"
+
+#define RK3288_GRF_SOC_CON(x) (0x244 + x * 4)
+#define RK3288_GRF_SOC_STATUS 0x280
+
+enum rk3288_plls {
+ apll, dpll, cpll, gpll, npll,
+};
+
+struct rockchip_pll_rate_table rk3288_pll_rates[] = {
+ RK3066_PLL_RATE(2208000000, 1, 92, 1),
+ RK3066_PLL_RATE(2184000000, 1, 91, 1),
+ RK3066_PLL_RATE(2160000000, 1, 90, 1),
+ RK3066_PLL_RATE(2136000000, 1, 89, 1),
+ RK3066_PLL_RATE(2112000000, 1, 88, 1),
+ RK3066_PLL_RATE(2088000000, 1, 87, 1),
+ RK3066_PLL_RATE(2064000000, 1, 86, 1),
+ RK3066_PLL_RATE(2040000000, 1, 85, 1),
+ RK3066_PLL_RATE(2016000000, 1, 84, 1),
+ RK3066_PLL_RATE(1992000000, 1, 83, 1),
+ RK3066_PLL_RATE(1968000000, 1, 82, 1),
+ RK3066_PLL_RATE(1944000000, 1, 81, 1),
+ RK3066_PLL_RATE(1920000000, 1, 80, 1),
+ RK3066_PLL_RATE(1896000000, 1, 79, 1),
+ RK3066_PLL_RATE(1872000000, 1, 78, 1),
+ RK3066_PLL_RATE(1848000000, 1, 77, 1),
+ RK3066_PLL_RATE(1824000000, 1, 76, 1),
+ RK3066_PLL_RATE(1800000000, 1, 75, 1),
+ RK3066_PLL_RATE(1776000000, 1, 74, 1),
+ RK3066_PLL_RATE(1752000000, 1, 73, 1),
+ RK3066_PLL_RATE(1728000000, 1, 72, 1),
+ RK3066_PLL_RATE(1704000000, 1, 71, 1),
+ RK3066_PLL_RATE(1680000000, 1, 70, 1),
+ RK3066_PLL_RATE(1656000000, 1, 69, 1),
+ RK3066_PLL_RATE(1632000000, 1, 68, 1),
+ RK3066_PLL_RATE(1608000000, 1, 67, 1),
+ RK3066_PLL_RATE(1560000000, 1, 65, 1),
+ RK3066_PLL_RATE(1512000000, 1, 63, 1),
+ RK3066_PLL_RATE(1488000000, 1, 62, 1),
+ RK3066_PLL_RATE(1464000000, 1, 61, 1),
+ RK3066_PLL_RATE(1440000000, 1, 60, 1),
+ RK3066_PLL_RATE(1416000000, 1, 59, 1),
+ RK3066_PLL_RATE(1392000000, 1, 58, 1),
+ RK3066_PLL_RATE(1368000000, 1, 57, 1),
+ RK3066_PLL_RATE(1344000000, 1, 56, 1),
+ RK3066_PLL_RATE(1320000000, 1, 55, 1),
+ RK3066_PLL_RATE(1296000000, 1, 54, 1),
+ RK3066_PLL_RATE(1272000000, 1, 53, 1),
+ RK3066_PLL_RATE(1248000000, 1, 52, 1),
+ RK3066_PLL_RATE(1224000000, 1, 51, 1),
+ RK3066_PLL_RATE(1200000000, 1, 50, 1),
+ RK3066_PLL_RATE(1188000000, 2, 99, 1),
+ RK3066_PLL_RATE(1176000000, 1, 49, 1),
+ RK3066_PLL_RATE(1128000000, 1, 47, 1),
+ RK3066_PLL_RATE(1104000000, 1, 46, 1),
+ RK3066_PLL_RATE(1008000000, 1, 84, 2),
+ RK3066_PLL_RATE( 912000000, 1, 76, 2),
+ RK3066_PLL_RATE( 891000000, 8, 594, 2),
+ RK3066_PLL_RATE( 888000000, 1, 74, 2),
+ RK3066_PLL_RATE( 816000000, 1, 68, 2),
+ RK3066_PLL_RATE( 798000000, 2, 133, 2),
+ RK3066_PLL_RATE( 792000000, 1, 66, 2),
+ RK3066_PLL_RATE( 768000000, 1, 64, 2),
+ RK3066_PLL_RATE( 742500000, 8, 495, 2),
+ RK3066_PLL_RATE( 696000000, 1, 58, 2),
+ RK3066_PLL_RATE( 600000000, 1, 50, 2),
+ RK3066_PLL_RATE( 594000000, 2, 198, 4),
+ RK3066_PLL_RATE( 552000000, 1, 46, 2),
+ RK3066_PLL_RATE( 504000000, 1, 84, 4),
+ RK3066_PLL_RATE( 456000000, 1, 76, 4),
+ RK3066_PLL_RATE( 408000000, 1, 68, 4),
+ RK3066_PLL_RATE( 384000000, 2, 128, 4),
+ RK3066_PLL_RATE( 360000000, 1, 60, 4),
+ RK3066_PLL_RATE( 312000000, 1, 52, 4),
+ RK3066_PLL_RATE( 300000000, 1, 50, 4),
+ RK3066_PLL_RATE( 297000000, 2, 198, 8),
+ RK3066_PLL_RATE( 252000000, 1, 84, 8),
+ RK3066_PLL_RATE( 216000000, 1, 72, 8),
+ RK3066_PLL_RATE( 148500000, 2, 99, 8),
+ RK3066_PLL_RATE( 126000000, 1, 84, 16),
+ RK3066_PLL_RATE( 48000000, 1, 64, 32),
+ { /* sentinel */ },
+};
+
+PNAME(mux_pll_p) = { "xin24m", "xin32k" };
+PNAME(mux_armclk_p) = { "apll_core", "gpll_core" };
+PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr" };
+PNAME(mux_aclk_cpu_src_p) = { "cpll_aclk_cpu", "gpll_aclk_cpu" };
+
+PNAME(mux_pll_src_cpll_gpll_p) = { "cpll", "gpll" };
+PNAME(mux_pll_src_npll_cpll_gpll_p) = { "npll", "cpll", "gpll" };
+PNAME(mux_pll_src_cpll_gpll_npll_p) = { "cpll", "gpll", "npll" };
+PNAME(mux_pll_src_cpll_gpll_usb480m_p) = { "cpll", "gpll", "usb480m" };
+
+PNAME(mux_mmc_src_p) = { "cpll", "gpll", "xin24m", "xin24m" };
+PNAME(mux_i2s_pre_p) = { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
+PNAME(mux_i2s_clkout_p) = { "i2s_pre", "xin12m" };
+PNAME(mux_spdif_p) = { "spdif_pre", "spdif_frac", "xin12m" };
+PNAME(mux_spdif_8ch_p) = { "spdif_8ch_pre", "spdif_8ch_frac", "xin12m" };
+PNAME(mux_uart0_pll_p) = { "cpll", "gpll", "usbphy_480m_src", "npll" };
+PNAME(mux_uart0_p) = { "uart0_src", "uart0_frac", "xin24m" };
+PNAME(mux_uart1_p) = { "uart1_src", "uart1_frac", "xin24m" };
+PNAME(mux_uart2_p) = { "uart2_src", "uart2_frac", "xin24m" };
+PNAME(mux_uart3_p) = { "uart3_src", "uart3_frac", "xin24m" };
+PNAME(mux_uart4_p) = { "uart4_src", "uart4_frac", "xin24m" };
+PNAME(mux_cif_out_p) = { "cif_src", "xin24m" };
+PNAME(mux_macref_p) = { "mac_src", "ext_gmac" };
+PNAME(mux_hsadcout_p) = { "hsadc_src", "ext_hsadc" };
+PNAME(mux_edp_24m_p) = { "ext_edp_24m", "xin24m" };
+PNAME(mux_tspout_p) = { "cpll", "gpll", "npll", "xin27m" };
+
+PNAME(mux_usbphy480m_p) = { "sclk_otgphy0", "sclk_otgphy1",
+ "sclk_otgphy2" };
+PNAME(mux_hsicphy480m_p) = { "cpll", "gpll", "usbphy480m_src" };
+PNAME(mux_hsicphy12m_p) = { "hsicphy12m_xin12m", "hsicphy12m_usbphy" };
+
+static struct rockchip_pll_clock rk3288_pll_clks[] __initdata = {
+ [apll] = PLL(pll_rk3066, PLL_APLL, "apll", mux_pll_p, 0, RK3288_PLL_CON(0),
+ RK3288_MODE_CON, 0, 6, rk3288_pll_rates),
+ [dpll] = PLL(pll_rk3066, PLL_DPLL, "dpll", mux_pll_p, 0, RK3288_PLL_CON(4),
+ RK3288_MODE_CON, 4, 5, NULL),
+ [cpll] = PLL(pll_rk3066, PLL_CPLL, "cpll", mux_pll_p, 0, RK3288_PLL_CON(8),
+ RK3288_MODE_CON, 8, 7, rk3288_pll_rates),
+ [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3288_PLL_CON(12),
+ RK3288_MODE_CON, 12, 8, rk3288_pll_rates),
+ [npll] = PLL(pll_rk3066, PLL_NPLL, "npll", mux_pll_p, 0, RK3288_PLL_CON(16),
+ RK3288_MODE_CON, 14, 9, NULL),
+};
+
+static struct clk_div_table div_hclk_cpu_t[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 3, .div = 4 },
+ { /* sentinel */},
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+
+static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
+ /*
+ * Clock-Architecture Diagram 1
+ */
+
+ GATE(0, "apll_core", "apll", 0,
+ RK3288_CLKGATE_CON(0), 1, GFLAGS),
+ GATE(0, "gpll_core", "gpll", 0,
+ RK3288_CLKGATE_CON(0), 2, GFLAGS),
+ COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0,
+ RK3288_CLKSEL_CON(0), 15, 1, MFLAGS, 8, 5, DFLAGS),
+
+ COMPOSITE_NOMUX(0, "armcore0", "armclk", 0,
+ RK3288_CLKSEL_CON(36), 0, 3, DFLAGS,
+ RK3288_CLKGATE_CON(12), 0, GFLAGS),
+ COMPOSITE_NOMUX(0, "armcore1", "armclk", 0,
+ RK3288_CLKSEL_CON(36), 4, 3, DFLAGS,
+ RK3288_CLKGATE_CON(12), 1, GFLAGS),
+ COMPOSITE_NOMUX(0, "armcore2", "armclk", 0,
+ RK3288_CLKSEL_CON(36), 8, 3, DFLAGS,
+ RK3288_CLKGATE_CON(12), 2, GFLAGS),
+ COMPOSITE_NOMUX(0, "armcore3", "armclk", 0,
+ RK3288_CLKSEL_CON(36), 12, 3, DFLAGS,
+ RK3288_CLKGATE_CON(12), 3, GFLAGS),
+ COMPOSITE_NOMUX(0, "l2ram", "armclk", 0,
+ RK3288_CLKSEL_CON(37), 0, 3, DFLAGS,
+ RK3288_CLKGATE_CON(12), 4, GFLAGS),
+ COMPOSITE_NOMUX(0, "aclk_core_m0", "armclk", 0,
+ RK3288_CLKSEL_CON(0), 0, 4, DFLAGS,
+ RK3288_CLKGATE_CON(12), 5, GFLAGS),
+ COMPOSITE_NOMUX(0, "aclk_core_mp", "armclk", 0,
+ RK3288_CLKSEL_CON(0), 4, 4, DFLAGS,
+ RK3288_CLKGATE_CON(12), 6, GFLAGS),
+ COMPOSITE_NOMUX(0, "atclk", "armclk", 0,
+ RK3288_CLKSEL_CON(37), 4, 5, DFLAGS,
+ RK3288_CLKGATE_CON(12), 7, GFLAGS),
+ COMPOSITE_NOMUX(0, "pclk_dbg_pre", "armclk", 0,
+ RK3288_CLKSEL_CON(37), 9, 5, DFLAGS,
+ RK3288_CLKGATE_CON(12), 8, GFLAGS),
+ GATE(0, "pclk_dbg", "pclk_dbg_pre", 0,
+ RK3288_CLKGATE_CON(12), 9, GFLAGS),
+ GATE(0, "cs_dbg", "pclk_dbg_pre", 0,
+ RK3288_CLKGATE_CON(12), 10, GFLAGS),
+ GATE(0, "pclk_core_niu", "pclk_dbg_pre", 0,
+ RK3288_CLKGATE_CON(12), 11, GFLAGS),
+
+ GATE(0, "dpll_ddr", "dpll", 0,
+ RK3288_CLKGATE_CON(0), 8, GFLAGS),
+ GATE(0, "gpll_ddr", "gpll", 0,
+ RK3288_CLKGATE_CON(0), 9, GFLAGS),
+ COMPOSITE_NOGATE(0, "ddrphy", mux_ddrphy_p, 0,
+ RK3288_CLKSEL_CON(26), 2, 1, MFLAGS, 0, 2,
+ DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+
+ GATE(0, "gpll_aclk_cpu", "gpll", 0,
+ RK3288_CLKGATE_CON(0), 10, GFLAGS),
+ GATE(0, "cpll_aclk_cpu", "cpll", 0,
+ RK3288_CLKGATE_CON(0), 11, GFLAGS),
+ COMPOSITE_NOGATE(0, "aclk_cpu_src", mux_aclk_cpu_src_p, 0,
+ RK3288_CLKSEL_CON(1), 15, 1, MFLAGS, 3, 5, DFLAGS),
+ DIV(0, "aclk_cpu_pre", "aclk_cpu_src", 0,
+ RK3288_CLKSEL_CON(1), 0, 3, DFLAGS),
+ GATE(0, "aclk_cpu", "aclk_cpu_pre", 0,
+ RK3288_CLKGATE_CON(0), 3, GFLAGS),
+ COMPOSITE_NOMUX(0, "pclk_cpu", "aclk_cpu_pre", 0,
+ RK3288_CLKSEL_CON(1), 12, 3, DFLAGS,
+ RK3288_CLKGATE_CON(0), 5, GFLAGS),
+ COMPOSITE_NOMUX_DIVTBL(0, "hclk_cpu", "aclk_cpu_pre", 0,
+ RK3288_CLKSEL_CON(1), 8, 2, DFLAGS, div_hclk_cpu_t,
+ RK3288_CLKGATE_CON(0), 4, GFLAGS),
+ GATE(0, "c2c_host", "aclk_cpu_src", 0,
+ RK3288_CLKGATE_CON(13), 8, GFLAGS),
+ COMPOSITE_NOMUX(0, "crypto", "aclk_cpu_pre", 0,
+ RK3288_CLKSEL_CON(26), 6, 2, DFLAGS,
+ RK3288_CLKGATE_CON(5), 4, GFLAGS),
+ GATE(0, "aclk_bus_2pmu", "aclk_cpu_pre", 0,
+ RK3288_CLKGATE_CON(0), 7, GFLAGS),
+
+ COMPOSITE(0, "i2s_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(4), 15, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(4), 1, GFLAGS),
+ COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", 0,
+ RK3288_CLKSEL_CON(8), 0,
+ RK3288_CLKGATE_CON(4), 2, GFLAGS),
+ MUX(0, "i2s_pre", mux_i2s_pre_p, 0,
+ RK3288_CLKSEL_CON(4), 8, 2, MFLAGS),
+ COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, 0,
+ RK3288_CLKSEL_CON(4), 12, 1, MFLAGS,
+ RK3288_CLKGATE_CON(4), 0, GFLAGS),
+ GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", 0,
+ RK3288_CLKGATE_CON(4), 3, GFLAGS),
+
+ MUX(0, "spdif_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(5), 15, 1, MFLAGS),
+ COMPOSITE_NOMUX(0, "spdif_pre", "spdif_src", 0,
+ RK3288_CLKSEL_CON(5), 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(4), 4, GFLAGS),
+ COMPOSITE_FRAC(0, "spdif_frac", "spdif_src", 0,
+ RK3288_CLKSEL_CON(9), 0,
+ RK3288_CLKGATE_CON(4), 5, GFLAGS),
+ COMPOSITE_NODIV(SCLK_SPDIF, "sclk_spdif", mux_spdif_p, 0,
+ RK3288_CLKSEL_CON(5), 8, 2, MFLAGS,
+ RK3288_CLKGATE_CON(4), 6, GFLAGS),
+ COMPOSITE_NOMUX(0, "spdif_8ch_pre", "spdif_src", 0,
+ RK3288_CLKSEL_CON(40), 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(4), 7, GFLAGS),
+ COMPOSITE_FRAC(0, "spdif_8ch_frac", "spdif_8ch_src", 0,
+ RK3288_CLKSEL_CON(41), 0,
+ RK3288_CLKGATE_CON(4), 8, GFLAGS),
+ COMPOSITE_NODIV(SCLK_SPDIF8CH, "sclk_spdif_8ch", mux_spdif_8ch_p, 0,
+ RK3288_CLKSEL_CON(40), 8, 2, MFLAGS,
+ RK3288_CLKGATE_CON(4), 9, GFLAGS),
+
+ GATE(0, "sclk_acc_efuse", "xin24m", 0,
+ RK3288_CLKGATE_CON(0), 12, GFLAGS),
+
+ GATE(SCLK_TIMER0, "sclk_timer0", "xin24m", 0,
+ RK3288_CLKGATE_CON(1), 0, GFLAGS),
+ GATE(SCLK_TIMER1, "sclk_timer1", "xin24m", 0,
+ RK3288_CLKGATE_CON(1), 1, GFLAGS),
+ GATE(SCLK_TIMER2, "sclk_timer2", "xin24m", 0,
+ RK3288_CLKGATE_CON(1), 2, GFLAGS),
+ GATE(SCLK_TIMER3, "sclk_timer3", "xin24m", 0,
+ RK3288_CLKGATE_CON(1), 3, GFLAGS),
+ GATE(SCLK_TIMER4, "sclk_timer4", "xin24m", 0,
+ RK3288_CLKGATE_CON(1), 4, GFLAGS),
+ GATE(SCLK_TIMER5, "sclk_timer5", "xin24m", 0,
+ RK3288_CLKGATE_CON(1), 5, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 2
+ */
+
+ COMPOSITE(0, "aclk_vepu", mux_pll_src_cpll_gpll_usb480m_p, 0,
+ RK3288_CLKSEL_CON(32), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3288_CLKGATE_CON(3), 9, GFLAGS),
+ COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
+ RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3288_CLKGATE_CON(3), 11, GFLAGS),
+
+ COMPOSITE(0, "aclk_vio0", mux_pll_src_cpll_gpll_usb480m_p, 0,
+ RK3288_CLKSEL_CON(31), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3288_CLKGATE_CON(3), 0, GFLAGS),
+ DIV(0, "hclk_vio", "aclk_vio0", 0,
+ RK3288_CLKSEL_CON(28), 8, 5, DFLAGS),
+ COMPOSITE(0, "aclk_vio1", mux_pll_src_cpll_gpll_usb480m_p, 0,
+ RK3288_CLKSEL_CON(31), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3288_CLKGATE_CON(3), 2, GFLAGS),
+
+ COMPOSITE(0, "aclk_rga_pre", mux_pll_src_cpll_gpll_usb480m_p, 0,
+ RK3288_CLKSEL_CON(30), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3288_CLKGATE_CON(3), 5, GFLAGS),
+ COMPOSITE(0, "sclk_rga", mux_pll_src_cpll_gpll_usb480m_p, 0,
+ RK3288_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3288_CLKGATE_CON(3), 4, GFLAGS),
+
+ COMPOSITE(DCLK_VOP0, "dclk_vop0", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3288_CLKSEL_CON(27), 0, 2, MFLAGS, 8, 8, DFLAGS,
+ RK3288_CLKGATE_CON(3), 1, GFLAGS),
+ COMPOSITE(DCLK_VOP1, "dclk_vop1", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3288_CLKSEL_CON(29), 6, 2, MFLAGS, 8, 8, DFLAGS,
+ RK3288_CLKGATE_CON(3), 3, GFLAGS),
+
+ COMPOSITE_NODIV(0, "sclk_edp_24m", mux_edp_24m_p, 0,
+ RK3288_CLKSEL_CON(28), 15, 1, MFLAGS,
+ RK3288_CLKGATE_CON(3), 12, GFLAGS),
+ COMPOSITE(0, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3288_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 6, DFLAGS,
+ RK3288_CLKGATE_CON(3), 13, GFLAGS),
+
+ COMPOSITE(0, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3288_CLKSEL_CON(6), 6, 2, MFLAGS, 0, 6, DFLAGS,
+ RK3288_CLKGATE_CON(3), 14, GFLAGS),
+ COMPOSITE(0, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3288_CLKSEL_CON(6), 14, 2, MFLAGS, 8, 6, DFLAGS,
+ RK3288_CLKGATE_CON(3), 15, GFLAGS),
+
+ GATE(0, "sclk_hdmi_hdcp", "xin24m", 0,
+ RK3288_CLKGATE_CON(5), 12, GFLAGS),
+ GATE(0, "sclk_hdmi_cec", "xin32k", 0,
+ RK3288_CLKGATE_CON(5), 11, GFLAGS),
+
+ COMPOSITE(0, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3288_CLKSEL_CON(39), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3288_CLKGATE_CON(13), 13, GFLAGS),
+ DIV(0, "hclk_hevc", "aclk_hevc", 0,
+ RK3288_CLKSEL_CON(40), 12, 2, DFLAGS),
+
+ COMPOSITE(0, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3288_CLKSEL_CON(42), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3288_CLKGATE_CON(13), 14, GFLAGS),
+ COMPOSITE(0, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3288_CLKSEL_CON(42), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3288_CLKGATE_CON(13), 15, GFLAGS),
+
+ COMPOSITE_NODIV(0, "vip_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(26), 8, 1, MFLAGS,
+ RK3288_CLKGATE_CON(3), 7, GFLAGS),
+ COMPOSITE_NOGATE(0, "sclk_vip_out", mux_cif_out_p, 0,
+ RK3288_CLKSEL_CON(26), 15, 1, MFLAGS, 9, 5, DFLAGS),
+
+ DIV(0, "pclk_pd_alive", "gpll", 0,
+ RK3288_CLKSEL_CON(33), 8, 5, DFLAGS),
+ COMPOSITE_NOMUX(0, "pclk_pd_pmu", "gpll", 0,
+ RK3288_CLKSEL_CON(33), 0, 5, DFLAGS,
+ RK3288_CLKGATE_CON(5), 8, GFLAGS),
+
+ COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
+ RK3288_CLKSEL_CON(34), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3288_CLKGATE_CON(5), 7, GFLAGS),
+
+ COMPOSITE(0, "aclk_peri_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(10), 15, 1, MFLAGS, 0, 5, DFLAGS,
+ RK3288_CLKGATE_CON(2), 0, GFLAGS),
+ COMPOSITE_NOMUX(0, "pclk_peri", "aclk_peri_src", 0,
+ RK3288_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK3288_CLKGATE_CON(2), 3, GFLAGS),
+ COMPOSITE_NOMUX(0, "hclk_peri", "aclk_peri_src", 0,
+ RK3288_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+ RK3288_CLKGATE_CON(2), 2, GFLAGS),
+ GATE(0, "aclk_peri", "aclk_peri_src", 0,
+ RK3288_CLKGATE_CON(2), 1, GFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 3
+ */
+
+ COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(25), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(2), 9, GFLAGS),
+ COMPOSITE(SCLK_SPI1, "sclk_spi1", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(25), 15, 1, MFLAGS, 8, 7, DFLAGS,
+ RK3288_CLKGATE_CON(2), 10, GFLAGS),
+ COMPOSITE(SCLK_SPI2, "sclk_spi2", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(39), 7, 1, MFLAGS, 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(2), 11, GFLAGS),
+
+ COMPOSITE(SCLK_SDMMC, "sclk_sdmmc", mux_mmc_src_p, 0,
+ RK3288_CLKSEL_CON(11), 6, 2, MFLAGS, 0, 6, DFLAGS,
+ RK3288_CLKGATE_CON(13), 0, GFLAGS),
+ COMPOSITE(SCLK_SDIO0, "sclk_sdio0", mux_mmc_src_p, 0,
+ RK3288_CLKSEL_CON(12), 6, 2, MFLAGS, 0, 6, DFLAGS,
+ RK3288_CLKGATE_CON(13), 1, GFLAGS),
+ COMPOSITE(SCLK_SDIO1, "sclk_sdio1", mux_mmc_src_p, 0,
+ RK3288_CLKSEL_CON(34), 14, 2, MFLAGS, 8, 6, DFLAGS,
+ RK3288_CLKGATE_CON(13), 2, GFLAGS),
+ COMPOSITE(SCLK_EMMC, "sclk_emmc", mux_mmc_src_p, 0,
+ RK3288_CLKSEL_CON(12), 14, 2, MFLAGS, 8, 6, DFLAGS,
+ RK3288_CLKGATE_CON(13), 3, GFLAGS),
+
+ COMPOSITE(0, "sclk_tspout", mux_tspout_p, 0,
+ RK3288_CLKSEL_CON(35), 14, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3288_CLKGATE_CON(4), 11, GFLAGS),
+ COMPOSITE(0, "sclk_tsp", mux_pll_src_cpll_gpll_npll_p, 0,
+ RK3288_CLKSEL_CON(35), 6, 2, MFLAGS, 0, 5, DFLAGS,
+ RK3288_CLKGATE_CON(4), 10, GFLAGS),
+
+ GATE(SCLK_OTGPHY0, "sclk_otgphy0", "usb480m", 0,
+ RK3288_CLKGATE_CON(13), 4, GFLAGS),
+ GATE(SCLK_OTGPHY1, "sclk_otgphy1", "usb480m", 0,
+ RK3288_CLKGATE_CON(13), 5, GFLAGS),
+ GATE(SCLK_OTGPHY2, "sclk_otgphy2", "usb480m", 0,
+ RK3288_CLKGATE_CON(13), 6, GFLAGS),
+ GATE(SCLK_OTG_ADP, "sclk_otg_adp", "xin32k", 0,
+ RK3288_CLKGATE_CON(13), 7, GFLAGS),
+
+ COMPOSITE_NOMUX(SCLK_TSADC, "sclk_tsadc", "xin32k", 0,
+ RK3288_CLKSEL_CON(2), 0, 6, DFLAGS,
+ RK3288_CLKGATE_CON(2), 7, GFLAGS),
+
+ COMPOSITE_NOMUX(SCLK_SARADC, "sclk_saradc", "xin24m", 0,
+ RK3288_CLKSEL_CON(24), 8, 8, DFLAGS,
+ RK3288_CLKGATE_CON(2), 8, GFLAGS),
+
+ GATE(SCLK_PS2C, "sclk_ps2c", "xin24m", 0,
+ RK3288_CLKGATE_CON(5), 13, GFLAGS),
+
+ COMPOSITE(SCLK_NANDC0, "sclk_nandc0", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(38), 7, 1, MFLAGS, 0, 5, DFLAGS,
+ RK3288_CLKGATE_CON(5), 5, GFLAGS),
+ COMPOSITE(SCLK_NANDC1, "sclk_nandc1", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(38), 15, 1, MFLAGS, 8, 5, DFLAGS,
+ RK3288_CLKGATE_CON(5), 6, GFLAGS),
+
+ COMPOSITE(0, "uart0_src", mux_uart0_pll_p, 0,
+ RK3288_CLKSEL_CON(13), 13, 2, MFLAGS, 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(1), 8, GFLAGS),
+ COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", 0,
+ RK3288_CLKSEL_CON(17), 0,
+ RK3288_CLKGATE_CON(1), 9, GFLAGS),
+ MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, 0,
+ RK3288_CLKSEL_CON(13), 8, 2, MFLAGS),
+ MUX(0, "uart_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(13), 15, 1, MFLAGS),
+ COMPOSITE_NOMUX(0, "uart1_src", "uart_src", 0,
+ RK3288_CLKSEL_CON(14), 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(1), 10, GFLAGS),
+ COMPOSITE_FRAC(0, "uart1_frac", "uart1_src", 0,
+ RK3288_CLKSEL_CON(18), 0,
+ RK3288_CLKGATE_CON(1), 11, GFLAGS),
+ MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, 0,
+ RK3288_CLKSEL_CON(14), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "uart2_src", "uart_src", 0,
+ RK3288_CLKSEL_CON(15), 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(1), 12, GFLAGS),
+ COMPOSITE_FRAC(0, "uart2_frac", "uart2_src", 0,
+ RK3288_CLKSEL_CON(19), 0,
+ RK3288_CLKGATE_CON(1), 13, GFLAGS),
+ MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, 0,
+ RK3288_CLKSEL_CON(15), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "uart3_src", "uart_src", 0,
+ RK3288_CLKSEL_CON(16), 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(1), 14, GFLAGS),
+ COMPOSITE_FRAC(0, "uart3_frac", "uart3_src", 0,
+ RK3288_CLKSEL_CON(20), 0,
+ RK3288_CLKGATE_CON(1), 15, GFLAGS),
+ MUX(SCLK_UART3, "sclk_uart3", mux_uart3_p, 0,
+ RK3288_CLKSEL_CON(16), 8, 2, MFLAGS),
+ COMPOSITE_NOMUX(0, "uart4_src", "uart_src", 0,
+ RK3288_CLKSEL_CON(3), 0, 7, DFLAGS,
+ RK3288_CLKGATE_CON(2), 12, GFLAGS),
+ COMPOSITE_FRAC(0, "uart4_frac", "uart4_src", 0,
+ RK3288_CLKSEL_CON(7), 0,
+ RK3288_CLKGATE_CON(2), 13, GFLAGS),
+ MUX(SCLK_UART4, "sclk_uart4", mux_uart4_p, 0,
+ RK3288_CLKSEL_CON(3), 8, 2, MFLAGS),
+
+ COMPOSITE(0, "mac_src", mux_pll_src_npll_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(21), 0, 2, MFLAGS, 8, 5, DFLAGS,
+ RK3288_CLKGATE_CON(2), 5, GFLAGS),
+ MUX(0, "macref", mux_macref_p, 0,
+ RK3288_CLKSEL_CON(21), 4, 1, MFLAGS),
+ GATE(0, "sclk_macref_out", "macref", 0,
+ RK3288_CLKGATE_CON(5), 3, GFLAGS),
+ GATE(SCLK_MACREF, "sclk_macref", "macref", 0,
+ RK3288_CLKGATE_CON(5), 2, GFLAGS),
+ GATE(SCLK_MAC_RX, "sclk_mac_rx", "macref", 0,
+ RK3288_CLKGATE_CON(5), 0, GFLAGS),
+ GATE(SCLK_MAC_TX, "sclk_mac_tx", "macref", 0,
+ RK3288_CLKGATE_CON(5), 1, GFLAGS),
+
+ COMPOSITE(0, "hsadc_src", mux_pll_src_cpll_gpll_p, 0,
+ RK3288_CLKSEL_CON(22), 0, 1, MFLAGS, 8, 8, DFLAGS,
+ RK3288_CLKGATE_CON(2), 6, GFLAGS),
+ MUX(SCLK_HSADC, "sclk_hsadc_out", mux_hsadcout_p, 0,
+ RK3288_CLKSEL_CON(22), 4, 1, MFLAGS),
+
+ GATE(0, "jtag", "ext_jtag", 0,
+ RK3288_CLKGATE_CON(4), 14, GFLAGS),
+
+ COMPOSITE_NODIV(0, "usbphy480m_src", mux_usbphy480m_p, 0,
+ RK3288_CLKSEL_CON(13), 11, 2, MFLAGS,
+ RK3288_CLKGATE_CON(5), 15, GFLAGS),
+ COMPOSITE_NODIV(SCLK_HSICPHY480M, "sclk_hsicphy480m", mux_hsicphy480m_p, 0,
+ RK3288_CLKSEL_CON(29), 0, 2, MFLAGS,
+ RK3288_CLKGATE_CON(3), 6, GFLAGS),
+ GATE(0, "hsicphy12m_xin12m", "xin12m", 0,
+ RK3288_CLKGATE_CON(13), 9, GFLAGS),
+ DIV(0, "hsicphy12m_usbphy", "sclk_hsicphy480m", 0,
+ RK3288_CLKSEL_CON(11), 8, 6, DFLAGS),
+ MUX(SCLK_HSICPHY12M, "sclk_hsicphy12m", mux_hsicphy12m_p, 0,
+ RK3288_CLKSEL_CON(22), 4, 1, MFLAGS),
+
+ /*
+ * Clock-Architecture Diagram 4
+ */
+
+ /* aclk_cpu gates */
+ GATE(0, "sclk_intmem0", "aclk_cpu", 0, RK3288_CLKGATE_CON(10), 5, GFLAGS),
+ GATE(0, "sclk_intmem1", "aclk_cpu", 0, RK3288_CLKGATE_CON(10), 6, GFLAGS),
+ GATE(0, "sclk_intmem2", "aclk_cpu", 0, RK3288_CLKGATE_CON(10), 7, GFLAGS),
+ GATE(ACLK_DMAC1, "aclk_dmac1", "aclk_cpu", 0, RK3288_CLKGATE_CON(10), 12, GFLAGS),
+ GATE(0, "aclk_strc_sys", "aclk_cpu", 0, RK3288_CLKGATE_CON(10), 13, GFLAGS),
+ GATE(0, "aclk_intmem", "aclk_cpu", 0, RK3288_CLKGATE_CON(10), 4, GFLAGS),
+ GATE(ACLK_CRYPTO, "aclk_crypto", "aclk_cpu", 0, RK3288_CLKGATE_CON(11), 6, GFLAGS),
+ GATE(0, "aclk_ccp", "aclk_cpu", 0, RK3288_CLKGATE_CON(11), 8, GFLAGS),
+
+ /* hclk_cpu gates */
+ GATE(HCLK_CRYPTO, "hclk_crypto", "hclk_cpu", 0, RK3288_CLKGATE_CON(11), 7, GFLAGS),
+ GATE(HCLK_I2S0, "hclk_i2s0", "hclk_cpu", 0, RK3288_CLKGATE_CON(10), 8, GFLAGS),
+ GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", 0, RK3288_CLKGATE_CON(10), 9, GFLAGS),
+ GATE(HCLK_SPDIF, "hclk_spdif", "hclk_cpu", 0, RK3288_CLKGATE_CON(10), 10, GFLAGS),
+ GATE(HCLK_SPDIF8CH, "hclk_spdif_8ch", "hclk_cpu", 0, RK3288_CLKGATE_CON(10), 11, GFLAGS),
+
+ /* pclk_cpu gates */
+ GATE(PCLK_PWM, "pclk_pwm", "pclk_cpu", 0, RK3288_CLKGATE_CON(10), 0, GFLAGS),
+ GATE(PCLK_TIMER, "pclk_timer", "pclk_cpu", 0, RK3288_CLKGATE_CON(10), 1, GFLAGS),
+ GATE(PCLK_I2C0, "pclk_i2c0", "pclk_cpu", 0, RK3288_CLKGATE_CON(10), 2, GFLAGS),
+ GATE(PCLK_I2C1, "pclk_i2c1", "pclk_cpu", 0, RK3288_CLKGATE_CON(10), 3, GFLAGS),
+ GATE(0, "pclk_ddrupctl0", "pclk_cpu", 0, RK3288_CLKGATE_CON(10), 14, GFLAGS),
+ GATE(0, "pclk_publ0", "pclk_cpu", 0, RK3288_CLKGATE_CON(10), 15, GFLAGS),
+ GATE(0, "pclk_ddrupctl1", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 0, GFLAGS),
+ GATE(0, "pclk_publ1", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 1, GFLAGS),
+ GATE(0, "pclk_efuse_1024", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 2, GFLAGS),
+ GATE(PCLK_TZPC, "pclk_tzpc", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 3, GFLAGS),
+ GATE(PCLK_UART2, "pclk_uart2", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 9, GFLAGS),
+ GATE(0, "pclk_efuse_256", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 10, GFLAGS),
+ GATE(PCLK_RKPWM, "pclk_rkpwm", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 11, GFLAGS),
+
+ /* ddrctrl [DDR Controller PHY clock] gates */
+ GATE(0, "nclk_ddrupctl0", "ddrphy", 0, RK3288_CLKGATE_CON(11), 4, GFLAGS),
+ GATE(0, "nclk_ddrupctl1", "ddrphy", 0, RK3288_CLKGATE_CON(11), 5, GFLAGS),
+
+ /* ddrphy gates */
+ GATE(0, "sclk_ddrphy0", "ddrphy", 0, RK3288_CLKGATE_CON(4), 12, GFLAGS),
+ GATE(0, "sclk_ddrphy1", "ddrphy", 0, RK3288_CLKGATE_CON(4), 13, GFLAGS),
+
+ /* aclk_peri gates */
+ GATE(0, "aclk_peri_axi_matrix", "aclk_peri", 0, RK3288_CLKGATE_CON(6), 2, GFLAGS),
+ GATE(ACLK_DMAC2, "aclk_dmac2", "aclk_peri", 0, RK3288_CLKGATE_CON(6), 3, GFLAGS),
+ GATE(0, "aclk_peri_niu", "aclk_peri", 0, RK3288_CLKGATE_CON(7), 11, GFLAGS),
+ GATE(ACLK_MMU, "aclk_mmu", "aclk_peri", 0, RK3288_CLKGATE_CON(8), 12, GFLAGS),
+ GATE(ACLK_GMAC, "aclk_gmac", "aclk_peri", 0, RK3288_CLKGATE_CON(8), 0, GFLAGS),
+ GATE(HCLK_GPS, "hclk_gps", "aclk_peri", 0, RK3288_CLKGATE_CON(8), 2, GFLAGS),
+
+ /* hclk_peri gates */
+ GATE(0, "hclk_peri_matrix", "hclk_peri", 0, RK3288_CLKGATE_CON(6), 0, GFLAGS),
+ GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 4, GFLAGS),
+ GATE(HCLK_USBHOST0, "hclk_host0", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 6, GFLAGS),
+ GATE(HCLK_USBHOST1, "hclk_host1", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 7, GFLAGS),
+ GATE(HCLK_HSIC, "hclk_hsic", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 8, GFLAGS),
+ GATE(0, "hclk_usb_peri", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 9, GFLAGS),
+ GATE(0, "hclk_peri_ahb_arbi", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 10, GFLAGS),
+ GATE(0, "hclk_emem", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 12, GFLAGS),
+ GATE(0, "hclk_mem", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 13, GFLAGS),
+ GATE(HCLK_NANDC0, "hclk_nandc0", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 14, GFLAGS),
+ GATE(HCLK_NANDC1, "hclk_nandc1", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 15, GFLAGS),
+ GATE(HCLK_TSP, "hclk_tsp", "hclk_peri", 0, RK3288_CLKGATE_CON(8), 8, GFLAGS),
+ GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK3288_CLKGATE_CON(8), 3, GFLAGS),
+ GATE(HCLK_SDIO0, "hclk_sdio0", "hclk_peri", 0, RK3288_CLKGATE_CON(8), 4, GFLAGS),
+ GATE(HCLK_SDIO1, "hclk_sdio1", "hclk_peri", 0, RK3288_CLKGATE_CON(8), 5, GFLAGS),
+ GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK3288_CLKGATE_CON(8), 6, GFLAGS),
+ GATE(HCLK_HSADC, "hclk_hsadc", "hclk_peri", 0, RK3288_CLKGATE_CON(8), 7, GFLAGS),
+ GATE(0, "pmu_hclk_otg0", "hclk_peri", 0, RK3288_CLKGATE_CON(7), 5, GFLAGS),
+
+ /* pclk_peri gates */
+ GATE(0, "pclk_peri_matrix", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 1, GFLAGS),
+ GATE(PCLK_SPI0, "pclk_spi0", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 4, GFLAGS),
+ GATE(PCLK_SPI1, "pclk_spi1", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 5, GFLAGS),
+ GATE(PCLK_SPI2, "pclk_spi2", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 6, GFLAGS),
+ GATE(PCLK_PS2C, "pclk_ps2c", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 7, GFLAGS),
+ GATE(PCLK_UART0, "pclk_uart0", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 8, GFLAGS),
+ GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 9, GFLAGS),
+ GATE(PCLK_I2C4, "pclk_i2c4", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 15, GFLAGS),
+ GATE(PCLK_UART3, "pclk_uart3", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 11, GFLAGS),
+ GATE(PCLK_UART4, "pclk_uart4", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 12, GFLAGS),
+ GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 13, GFLAGS),
+ GATE(PCLK_I2C3, "pclk_i2c3", "pclk_peri", 0, RK3288_CLKGATE_CON(6), 14, GFLAGS),
+ GATE(PCLK_SARADC, "pclk_saradc", "pclk_peri", 0, RK3288_CLKGATE_CON(7), 1, GFLAGS),
+ GATE(PCLK_TSADC, "pclk_tsadc", "pclk_peri", 0, RK3288_CLKGATE_CON(7), 2, GFLAGS),
+ GATE(PCLK_SIM, "pclk_sim", "pclk_peri", 0, RK3288_CLKGATE_CON(7), 3, GFLAGS),
+ GATE(PCLK_I2C5, "pclk_i2c5", "pclk_peri", 0, RK3288_CLKGATE_CON(7), 0, GFLAGS),
+ GATE(PCLK_GMAC, "pclk_gmac", "pclk_peri", 0, RK3288_CLKGATE_CON(8), 1, GFLAGS),
+
+ GATE(SCLK_LCDC_PWM0, "sclk_lcdc_pwm0", "xin24m", 0, RK3288_CLKGATE_CON(13), 10, GFLAGS),
+ GATE(SCLK_LCDC_PWM1, "sclk_lcdc_pwm1", "xin24m", 0, RK3288_CLKGATE_CON(13), 11, GFLAGS),
+ GATE(0, "sclk_pvtm_core", "xin24m", 0, RK3288_CLKGATE_CON(5), 9, GFLAGS),
+ GATE(0, "sclk_pvtm_gpu", "xin24m", 0, RK3288_CLKGATE_CON(5), 10, GFLAGS),
+ GATE(0, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
+
+ /* sclk_gpu gates */
+ GATE(ACLK_GPU, "aclk_gpu", "sclk_gpu", 0, RK3288_CLKGATE_CON(18), 0, GFLAGS),
+
+ /* pclk_pd_alive gates */
+ GATE(PCLK_GPIO8, "pclk_gpio8", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 8, GFLAGS),
+ GATE(PCLK_GPIO7, "pclk_gpio7", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 7, GFLAGS),
+ GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 1, GFLAGS),
+ GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 2, GFLAGS),
+ GATE(PCLK_GPIO3, "pclk_gpio3", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 3, GFLAGS),
+ GATE(PCLK_GPIO4, "pclk_gpio4", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 4, GFLAGS),
+ GATE(PCLK_GPIO5, "pclk_gpio5", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 5, GFLAGS),
+ GATE(PCLK_GPIO6, "pclk_gpio6", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 6, GFLAGS),
+ GATE(PCLK_GRF, "pclk_grf", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 11, GFLAGS),
+ GATE(0, "pclk_alive_niu", "pclk_pd_alive", 0, RK3288_CLKGATE_CON(14), 12, GFLAGS),
+
+ /* pclk_pd_pmu gates */
+ GATE(PCLK_PMU, "pclk_pmu", "pclk_pd_pmu", 0, RK3288_CLKGATE_CON(17), 0, GFLAGS),
+ GATE(0, "pclk_intmem1", "pclk_pd_pmu", 0, RK3288_CLKGATE_CON(17), 1, GFLAGS),
+ GATE(0, "pclk_pmu_niu", "pclk_pd_pmu", 0, RK3288_CLKGATE_CON(17), 2, GFLAGS),
+ GATE(PCLK_SGRF, "pclk_sgrf", "pclk_pd_pmu", 0, RK3288_CLKGATE_CON(17), 3, GFLAGS),
+ GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_pd_pmu", 0, RK3288_CLKGATE_CON(17), 4, GFLAGS),
+
+ /* hclk_vio gates */
+ GATE(HCLK_RGA, "hclk_rga", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 1, GFLAGS),
+ GATE(HCLK_VOP0, "hclk_vop0", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 6, GFLAGS),
+ GATE(HCLK_VOP1, "hclk_vop1", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 8, GFLAGS),
+ GATE(0, "hclk_vio_ahb_arbi", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 9, GFLAGS),
+ GATE(0, "hclk_vio_niu", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 10, GFLAGS),
+ GATE(0, "hclk_vip", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 15, GFLAGS),
+ GATE(HCLK_IEP, "hclk_iep", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 3, GFLAGS),
+ GATE(HCLK_ISP, "hclk_isp", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 1, GFLAGS),
+ GATE(0, "hclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 10, GFLAGS),
+ GATE(0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 4, GFLAGS),
+ GATE(0, "pclk_mipi_dsi1", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 5, GFLAGS),
+ GATE(0, "pclk_mipi_csi", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 6, GFLAGS),
+ GATE(0, "pclk_lvds_phy", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 7, GFLAGS),
+ GATE(0, "pclk_edp_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 8, GFLAGS),
+ GATE(0, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 9, GFLAGS),
+ GATE(0, "pclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 11, GFLAGS),
+
+ /* aclk_vio0 gates */
+ GATE(ACLK_VOP0, "aclk_vop0", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 5, GFLAGS),
+ GATE(0, "aclk_iep", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 2, GFLAGS),
+ GATE(0, "aclk_vio0_niu", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 11, GFLAGS),
+ GATE(0, "aclk_vip", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 14, GFLAGS),
+
+ /* aclk_vio1 gates */
+ GATE(ACLK_VOP1, "aclk_vop1", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 7, GFLAGS),
+ GATE(0, "aclk_isp", "aclk_vio1", 0, RK3288_CLKGATE_CON(16), 2, GFLAGS),
+ GATE(0, "aclk_vio1_niu", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 12, GFLAGS),
+
+ /* aclk_rga_pre gates */
+ GATE(ACLK_RGA, "aclk_rga", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 0, GFLAGS),
+ GATE(0, "aclk_rga_niu", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 13, GFLAGS),
+
+ /*
+ * Other ungrouped clocks.
+ */
+
+ GATE(0, "pclk_vip_in", "ext_vip", 0, RK3288_CLKGATE_CON(16), 0, GFLAGS),
+ GATE(0, "pclk_isp_in", "ext_isp", 0, RK3288_CLKGATE_CON(16), 3, GFLAGS),
+};
+
+static void __init rk3288_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+ struct clk *clk;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base) {
+ pr_err("%s: could not map cru region\n", __func__);
+ return;
+ }
+
+ rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+
+ /* xin12m is created by an cru-internal divider */
+ clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
+ if (IS_ERR(clk))
+ pr_warn("%s: could not register clock xin12m: %ld\n",
+ __func__, PTR_ERR(clk));
+
+
+ clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
+ if (IS_ERR(clk))
+ pr_warn("%s: could not register clock usb480m: %ld\n",
+ __func__, PTR_ERR(clk));
+
+ rockchip_clk_register_plls(rk3288_pll_clks,
+ ARRAY_SIZE(rk3288_pll_clks),
+ RK3288_GRF_SOC_STATUS);
+ rockchip_clk_register_branches(rk3288_clk_branches,
+ ARRAY_SIZE(rk3288_clk_branches));
+
+ rockchip_register_softrst(np, 9, reg_base + RK3288_SOFTRST_CON(0),
+ ROCKCHIP_SOFTRST_HIWORD_MASK);
+}
+CLK_OF_DECLARE(rk3288_cru, "rockchip,rk3288-cru", rk3288_clk_init);
diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c
new file mode 100644
index 0000000..278cf9d
--- /dev/null
+++ b/drivers/clk/rockchip/clk.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on
+ *
+ * samsung/clk.c
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include "clk.h"
+
+/**
+ * Register a clock branch.
+ * Most clock branches have a form like
+ *
+ * src1 --|--\
+ * |M |--[GATE]-[DIV]-
+ * src2 --|--/
+ *
+ * sometimes without one of those components.
+ */
+struct clk *rockchip_clk_register_branch(const char *name,
+ const char **parent_names, u8 num_parents, void __iomem *base,
+ int muxdiv_offset, u8 mux_shift, u8 mux_width, u8 mux_flags,
+ u8 div_shift, u8 div_width, u8 div_flags,
+ struct clk_div_table *div_table, int gate_offset,
+ u8 gate_shift, u8 gate_flags, unsigned long flags,
+ spinlock_t *lock)
+{
+ struct clk *clk;
+ struct clk_mux *mux = NULL;
+ struct clk_gate *gate = NULL;
+ struct clk_divider *div = NULL;
+ const struct clk_ops *mux_ops = NULL, *div_ops = NULL,
+ *gate_ops = NULL;
+
+ if (num_parents > 1) {
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ mux->reg = base + muxdiv_offset;
+ mux->shift = mux_shift;
+ mux->mask = BIT(mux_width) - 1;
+ mux->flags = mux_flags;
+ mux->lock = lock;
+ mux_ops = (mux_flags & CLK_MUX_READ_ONLY) ? &clk_mux_ro_ops
+ : &clk_mux_ops;
+ }
+
+ if (gate_offset >= 0) {
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ gate->flags = gate_flags;
+ gate->reg = base + gate_offset;
+ gate->bit_idx = gate_shift;
+ gate->lock = lock;
+ gate_ops = &clk_gate_ops;
+ }
+
+ if (div_width > 0) {
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ div->flags = div_flags;
+ div->reg = base + muxdiv_offset;
+ div->shift = div_shift;
+ div->width = div_width;
+ div->lock = lock;
+ div->table = div_table;
+ div_ops = (div_flags & CLK_DIVIDER_READ_ONLY)
+ ? &clk_divider_ro_ops
+ : &clk_divider_ops;
+ }
+
+ clk = clk_register_composite(NULL, name, parent_names, num_parents,
+ mux ? &mux->hw : NULL, mux_ops,
+ div ? &div->hw : NULL, div_ops,
+ gate ? &gate->hw : NULL, gate_ops,
+ flags);
+
+ return clk;
+}
+
+static DEFINE_SPINLOCK(clk_lock);
+static struct clk **clk_table;
+static void __iomem *reg_base;
+static struct clk_onecell_data clk_data;
+static struct device_node *cru_node;
+static struct regmap *grf;
+
+void __init rockchip_clk_init(struct device_node *np, void __iomem *base,
+ unsigned long nr_clks)
+{
+ reg_base = base;
+ cru_node = np;
+ grf = ERR_PTR(-EPROBE_DEFER);
+
+ clk_table = kcalloc(nr_clks, sizeof(struct clk *), GFP_KERNEL);
+ if (!clk_table)
+ pr_err("%s: could not allocate clock lookup table\n", __func__);
+
+ clk_data.clks = clk_table;
+ clk_data.clk_num = nr_clks;
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+
+struct regmap *rockchip_clk_get_grf(void)
+{
+ if (IS_ERR(grf))
+ grf = syscon_regmap_lookup_by_phandle(cru_node, "rockchip,grf");
+ return grf;
+}
+
+void rockchip_clk_add_lookup(struct clk *clk, unsigned int id)
+{
+ if (clk_table && id)
+ clk_table[id] = clk;
+}
+
+void __init rockchip_clk_register_plls(struct rockchip_pll_clock *list,
+ unsigned int nr_pll, int grf_lock_offset)
+{
+ struct clk *clk;
+ int idx;
+
+ for (idx = 0; idx < nr_pll; idx++, list++) {
+ clk = rockchip_clk_register_pll(list->type, list->name,
+ list->parent_names, list->num_parents,
+ reg_base, list->con_offset, grf_lock_offset,
+ list->lock_shift, list->mode_offset,
+ list->mode_shift, list->rate_table, &clk_lock);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s\n", __func__,
+ list->name);
+ continue;
+ }
+
+ rockchip_clk_add_lookup(clk, list->id);
+ }
+}
+
+void __init rockchip_clk_register_branches(
+ struct rockchip_clk_branch *list,
+ unsigned int nr_clk)
+{
+ struct clk *clk = NULL;
+ unsigned int idx;
+ unsigned long flags;
+
+ for (idx = 0; idx < nr_clk; idx++, list++) {
+ flags = list->flags;
+
+ /* catch simple muxes */
+ switch (list->branch_type) {
+ case branch_mux:
+ clk = clk_register_mux(NULL, list->name,
+ list->parent_names, list->num_parents,
+ flags, reg_base + list->muxdiv_offset,
+ list->mux_shift, list->mux_width,
+ list->mux_flags, &clk_lock);
+ break;
+ case branch_divider:
+ if (list->div_table)
+ clk = clk_register_divider_table(NULL,
+ list->name, list->parent_names[0],
+ flags, reg_base + list->muxdiv_offset,
+ list->div_shift, list->div_width,
+ list->div_flags, list->div_table,
+ &clk_lock);
+ else
+ clk = clk_register_divider(NULL, list->name,
+ list->parent_names[0], flags,
+ reg_base + list->muxdiv_offset,
+ list->div_shift, list->div_width,
+ list->div_flags, &clk_lock);
+ break;
+ case branch_fraction_divider:
+ /* unimplemented */
+ continue;
+ break;
+ case branch_gate:
+ flags |= CLK_SET_RATE_PARENT;
+
+ /* keep all gates untouched for now */
+ flags |= CLK_IGNORE_UNUSED;
+
+ clk = clk_register_gate(NULL, list->name,
+ list->parent_names[0], flags,
+ reg_base + list->gate_offset,
+ list->gate_shift, list->gate_flags, &clk_lock);
+ break;
+ case branch_composite:
+ /* keep all gates untouched for now */
+ flags |= CLK_IGNORE_UNUSED;
+
+ clk = rockchip_clk_register_branch(list->name,
+ list->parent_names, list->num_parents,
+ reg_base, list->muxdiv_offset, list->mux_shift,
+ list->mux_width, list->mux_flags,
+ list->div_shift, list->div_width,
+ list->div_flags, list->div_table,
+ list->gate_offset, list->gate_shift,
+ list->gate_flags, flags, &clk_lock);
+ break;
+ }
+
+ /* none of the cases above matched */
+ if (!clk) {
+ pr_err("%s: unknown clock type %d\n",
+ __func__, list->branch_type);
+ continue;
+ }
+
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to register clock %s: %ld\n",
+ __func__, list->name, PTR_ERR(clk));
+ continue;
+ }
+
+ rockchip_clk_add_lookup(clk, list->id);
+ }
+}
diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
new file mode 100644
index 0000000..887cbde
--- /dev/null
+++ b/drivers/clk/rockchip/clk.h
@@ -0,0 +1,347 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on
+ *
+ * samsung/clk.h
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef CLK_ROCKCHIP_CLK_H
+#define CLK_ROCKCHIP_CLK_H
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#define HIWORD_UPDATE(val, mask, shift) \
+ ((val) << (shift) | (mask) << ((shift) + 16))
+
+/* register positions shared by RK2928, RK3066 and RK3188 */
+#define RK2928_PLL_CON(x) (x * 0x4)
+#define RK2928_MODE_CON 0x40
+#define RK2928_CLKSEL_CON(x) (x * 0x4 + 0x44)
+#define RK2928_CLKGATE_CON(x) (x * 0x4 + 0xd0)
+#define RK2928_GLB_SRST_FST 0x100
+#define RK2928_GLB_SRST_SND 0x104
+#define RK2928_SOFTRST_CON(x) (x * 0x4 + 0x110)
+#define RK2928_MISC_CON 0x134
+
+#define RK3288_PLL_CON(x) RK2928_PLL_CON(x)
+#define RK3288_MODE_CON 0x50
+#define RK3288_CLKSEL_CON(x) (x * 0x4 + 0x60)
+#define RK3288_CLKGATE_CON(x) (x * 0x4 + 0x160)
+#define RK3288_GLB_SRST_FST 0x1b0
+#define RK3288_GLB_SRST_SND 0x1b4
+#define RK3288_SOFTRST_CON(x) (x * 0x4 + 0x1b8)
+#define RK3288_MISC_CON 0x1e8
+
+enum rockchip_pll_type {
+ pll_rk3066,
+};
+
+#define RK3066_PLL_RATE(_rate, _nr, _nf, _no) \
+{ \
+ .rate = _rate##U, \
+ .nr = _nr, \
+ .nf = _nf, \
+ .no = _no, \
+ .bwadj = (_nf >> 1), \
+}
+
+struct rockchip_pll_rate_table {
+ unsigned long rate;
+ unsigned int nr;
+ unsigned int nf;
+ unsigned int no;
+ unsigned int bwadj;
+};
+
+/**
+ * struct rockchip_pll_clock: information about pll clock
+ * @id: platform specific id of the clock.
+ * @name: name of this pll clock.
+ * @parent_name: name of the parent clock.
+ * @flags: optional flags for basic clock.
+ * @con_offset: offset of the register for configuring the PLL.
+ * @mode_offset: offset of the register for configuring the PLL-mode.
+ * @mode_shift: offset inside the mode-register for the mode of this pll.
+ * @lock_shift: offset inside the lock register for the lock status.
+ * @type: Type of PLL to be registered.
+ * @rate_table: Table of usable pll rates
+ */
+struct rockchip_pll_clock {
+ unsigned int id;
+ const char *name;
+ const char **parent_names;
+ u8 num_parents;
+ unsigned long flags;
+ int con_offset;
+ int mode_offset;
+ int mode_shift;
+ int lock_shift;
+ enum rockchip_pll_type type;
+ struct rockchip_pll_rate_table *rate_table;
+};
+
+#define PLL(_type, _id, _name, _pnames, _flags, _con, _mode, _mshift, \
+ _lshift, _rtable) \
+ { \
+ .id = _id, \
+ .type = _type, \
+ .name = _name, \
+ .parent_names = _pnames, \
+ .num_parents = ARRAY_SIZE(_pnames), \
+ .flags = CLK_GET_RATE_NOCACHE | _flags, \
+ .con_offset = _con, \
+ .mode_offset = _mode, \
+ .mode_shift = _mshift, \
+ .lock_shift = _lshift, \
+ .rate_table = _rtable, \
+ }
+
+struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
+ const char *name, const char **parent_names, u8 num_parents,
+ void __iomem *base, int con_offset, int grf_lock_offset,
+ int lock_shift, int reg_mode, int mode_shift,
+ struct rockchip_pll_rate_table *rate_table,
+ spinlock_t *lock);
+
+#define PNAME(x) static const char *x[] __initconst
+
+enum rockchip_clk_branch_type {
+ branch_composite,
+ branch_mux,
+ branch_divider,
+ branch_fraction_divider,
+ branch_gate,
+};
+
+struct rockchip_clk_branch {
+ unsigned int id;
+ enum rockchip_clk_branch_type branch_type;
+ const char *name;
+ const char **parent_names;
+ u8 num_parents;
+ unsigned long flags;
+ int muxdiv_offset;
+ u8 mux_shift;
+ u8 mux_width;
+ u8 mux_flags;
+ u8 div_shift;
+ u8 div_width;
+ u8 div_flags;
+ struct clk_div_table *div_table;
+ int gate_offset;
+ u8 gate_shift;
+ u8 gate_flags;
+};
+
+#define COMPOSITE(_id, cname, pnames, f, mo, ms, mw, mf, ds, dw,\
+ df, go, gs, gf) \
+ { \
+ .id = _id, \
+ .branch_type = branch_composite, \
+ .name = cname, \
+ .parent_names = pnames, \
+ .num_parents = ARRAY_SIZE(pnames), \
+ .flags = f, \
+ .muxdiv_offset = mo, \
+ .mux_shift = ms, \
+ .mux_width = mw, \
+ .mux_flags = mf, \
+ .div_shift = ds, \
+ .div_width = dw, \
+ .div_flags = df, \
+ .gate_offset = go, \
+ .gate_shift = gs, \
+ .gate_flags = gf, \
+ }
+
+#define COMPOSITE_NOMUX(_id, cname, pname, f, mo, ds, dw, df, \
+ go, gs, gf) \
+ { \
+ .id = _id, \
+ .branch_type = branch_composite, \
+ .name = cname, \
+ .parent_names = (const char *[]){ pname }, \
+ .num_parents = 1, \
+ .flags = f, \
+ .muxdiv_offset = mo, \
+ .div_shift = ds, \
+ .div_width = dw, \
+ .div_flags = df, \
+ .gate_offset = go, \
+ .gate_shift = gs, \
+ .gate_flags = gf, \
+ }
+
+#define COMPOSITE_NOMUX_DIVTBL(_id, cname, pname, f, mo, ds, dw,\
+ df, dt, go, gs, gf) \
+ { \
+ .id = _id, \
+ .branch_type = branch_composite, \
+ .name = cname, \
+ .parent_names = (const char *[]){ pname }, \
+ .num_parents = 1, \
+ .flags = f, \
+ .muxdiv_offset = mo, \
+ .div_shift = ds, \
+ .div_width = dw, \
+ .div_flags = df, \
+ .div_table = dt, \
+ .gate_offset = go, \
+ .gate_shift = gs, \
+ .gate_flags = gf, \
+ }
+
+#define COMPOSITE_NODIV(_id, cname, pnames, f, mo, ms, mw, mf, \
+ go, gs, gf) \
+ { \
+ .id = _id, \
+ .branch_type = branch_composite, \
+ .name = cname, \
+ .parent_names = pnames, \
+ .num_parents = ARRAY_SIZE(pnames), \
+ .flags = f, \
+ .muxdiv_offset = mo, \
+ .mux_shift = ms, \
+ .mux_width = mw, \
+ .mux_flags = mf, \
+ .gate_offset = go, \
+ .gate_shift = gs, \
+ .gate_flags = gf, \
+ }
+
+#define COMPOSITE_NOGATE(_id, cname, pnames, f, mo, ms, mw, mf, \
+ ds, dw, df) \
+ { \
+ .id = _id, \
+ .branch_type = branch_composite, \
+ .name = cname, \
+ .parent_names = pnames, \
+ .num_parents = ARRAY_SIZE(pnames), \
+ .flags = f, \
+ .muxdiv_offset = mo, \
+ .mux_shift = ms, \
+ .mux_width = mw, \
+ .mux_flags = mf, \
+ .div_shift = ds, \
+ .div_width = dw, \
+ .div_flags = df, \
+ .gate_offset = -1, \
+ }
+
+#define COMPOSITE_FRAC(_id, cname, pname, f, mo, df, go, gs, gf)\
+ { \
+ .id = _id, \
+ .branch_type = branch_fraction_divider, \
+ .name = cname, \
+ .parent_names = (const char *[]){ pname }, \
+ .num_parents = 1, \
+ .flags = f, \
+ .muxdiv_offset = mo, \
+ .div_shift = 16, \
+ .div_width = 16, \
+ .div_flags = df, \
+ .gate_offset = go, \
+ .gate_shift = gs, \
+ .gate_flags = gf, \
+ }
+
+#define MUX(_id, cname, pnames, f, o, s, w, mf) \
+ { \
+ .id = _id, \
+ .branch_type = branch_mux, \
+ .name = cname, \
+ .parent_names = pnames, \
+ .num_parents = ARRAY_SIZE(pnames), \
+ .flags = f, \
+ .muxdiv_offset = o, \
+ .mux_shift = s, \
+ .mux_width = w, \
+ .mux_flags = mf, \
+ .gate_offset = -1, \
+ }
+
+#define DIV(_id, cname, pname, f, o, s, w, df) \
+ { \
+ .id = _id, \
+ .branch_type = branch_divider, \
+ .name = cname, \
+ .parent_names = (const char *[]){ pname }, \
+ .num_parents = 1, \
+ .flags = f, \
+ .muxdiv_offset = o, \
+ .div_shift = s, \
+ .div_width = w, \
+ .div_flags = df, \
+ .gate_offset = -1, \
+ }
+
+#define DIVTBL(_id, cname, pname, f, o, s, w, df, dt) \
+ { \
+ .id = _id, \
+ .branch_type = branch_divider, \
+ .name = cname, \
+ .parent_names = (const char *[]){ pname }, \
+ .num_parents = 1, \
+ .flags = f, \
+ .muxdiv_offset = o, \
+ .div_shift = s, \
+ .div_width = w, \
+ .div_flags = df, \
+ .div_table = dt, \
+ }
+
+#define GATE(_id, cname, pname, f, o, b, gf) \
+ { \
+ .id = _id, \
+ .branch_type = branch_gate, \
+ .name = cname, \
+ .parent_names = (const char *[]){ pname }, \
+ .num_parents = 1, \
+ .flags = f, \
+ .gate_offset = o, \
+ .gate_shift = b, \
+ .gate_flags = gf, \
+ }
+
+
+void rockchip_clk_init(struct device_node *np, void __iomem *base,
+ unsigned long nr_clks);
+struct regmap *rockchip_clk_get_grf(void);
+void rockchip_clk_add_lookup(struct clk *clk, unsigned int id);
+void rockchip_clk_register_branches(struct rockchip_clk_branch *clk_list,
+ unsigned int nr_clk);
+void rockchip_clk_register_plls(struct rockchip_pll_clock *pll_list,
+ unsigned int nr_pll, int grf_lock_offset);
+
+#define ROCKCHIP_SOFTRST_HIWORD_MASK BIT(0)
+
+#ifdef CONFIG_RESET_CONTROLLER
+void rockchip_register_softrst(struct device_node *np,
+ unsigned int num_regs,
+ void __iomem *base, u8 flags);
+#else
+static inline void rockchip_register_softrst(struct device_node *np,
+ unsigned int num_regs,
+ void __iomem *base, u8 flags)
+{
+}
+#endif
+
+#endif
diff --git a/drivers/clk/rockchip/softrst.c b/drivers/clk/rockchip/softrst.c
new file mode 100644
index 0000000..552f7bb
--- /dev/null
+++ b/drivers/clk/rockchip/softrst.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+#include "clk.h"
+
+struct rockchip_softrst {
+ struct reset_controller_dev rcdev;
+ void __iomem *reg_base;
+ int num_regs;
+ int num_per_reg;
+ u8 flags;
+ spinlock_t lock;
+};
+
+static int rockchip_softrst_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct rockchip_softrst *softrst = container_of(rcdev,
+ struct rockchip_softrst,
+ rcdev);
+ int bank = id / softrst->num_per_reg;
+ int offset = id % softrst->num_per_reg;
+
+ if (softrst->flags & ROCKCHIP_SOFTRST_HIWORD_MASK) {
+ writel(BIT(offset) | (BIT(offset) << 16),
+ softrst->reg_base + (bank * 4));
+ } else {
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&softrst->lock, flags);
+
+ reg = readl(softrst->reg_base + (bank * 4));
+ writel(reg | BIT(offset), softrst->reg_base + (bank * 4));
+
+ spin_unlock_irqrestore(&softrst->lock, flags);
+ }
+
+ return 0;
+}
+
+static int rockchip_softrst_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct rockchip_softrst *softrst = container_of(rcdev,
+ struct rockchip_softrst,
+ rcdev);
+ int bank = id / softrst->num_per_reg;
+ int offset = id % softrst->num_per_reg;
+
+ if (softrst->flags & ROCKCHIP_SOFTRST_HIWORD_MASK) {
+ writel((BIT(offset) << 16), softrst->reg_base + (bank * 4));
+ } else {
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&softrst->lock, flags);
+
+ reg = readl(softrst->reg_base + (bank * 4));
+ writel(reg & ~BIT(offset), softrst->reg_base + (bank * 4));
+
+ spin_unlock_irqrestore(&softrst->lock, flags);
+ }
+
+ return 0;
+}
+
+static struct reset_control_ops rockchip_softrst_ops = {
+ .assert = rockchip_softrst_assert,
+ .deassert = rockchip_softrst_deassert,
+};
+
+void __init rockchip_register_softrst(struct device_node *np,
+ unsigned int num_regs,
+ void __iomem *base, u8 flags)
+{
+ struct rockchip_softrst *softrst;
+ int ret;
+
+ softrst = kzalloc(sizeof(*softrst), GFP_KERNEL);
+ if (!softrst)
+ return;
+
+ spin_lock_init(&softrst->lock);
+
+ softrst->reg_base = base;
+ softrst->flags = flags;
+ softrst->num_regs = num_regs;
+ softrst->num_per_reg = (flags & ROCKCHIP_SOFTRST_HIWORD_MASK) ? 16
+ : 32;
+
+ softrst->rcdev.owner = THIS_MODULE;
+ softrst->rcdev.nr_resets = num_regs * softrst->num_per_reg;
+ softrst->rcdev.ops = &rockchip_softrst_ops;
+ softrst->rcdev.of_node = np;
+ ret = reset_controller_register(&softrst->rcdev);
+ if (ret) {
+ pr_err("%s: could not register reset controller, %d\n",
+ __func__, ret);
+ kfree(softrst);
+ }
+};
diff --git a/drivers/clk/tegra/clk-periph-gate.c b/drivers/clk/tegra/clk-periph-gate.c
index 5070153..0aa8830 100644
--- a/drivers/clk/tegra/clk-periph-gate.c
+++ b/drivers/clk/tegra/clk-periph-gate.c
@@ -20,7 +20,8 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/tegra-soc.h>
+
+#include <soc/tegra/fuse.h>
#include "clk.h"
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 8b10c38..5679ffd 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -22,8 +22,11 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk/tegra.h>
-#include <linux/tegra-powergate.h>
+
+#include <soc/tegra/powergate.h>
+
#include <dt-bindings/clock/tegra30-car.h>
+
#include "clk.h"
#include "clk-id.h"
diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
index c0a7d77..f4503ba 100644
--- a/drivers/clk/tegra/clk.c
+++ b/drivers/clk/tegra/clk.c
@@ -19,7 +19,8 @@
#include <linux/of.h>
#include <linux/clk/tegra.h>
#include <linux/reset-controller.h>
-#include <linux/tegra-soc.h>
+
+#include <soc/tegra/fuse.h>
#include "clk.h"
diff --git a/drivers/gpu/drm/tegra/gr3d.c b/drivers/gpu/drm/tegra/gr3d.c
index 30f5ba9..6997485 100644
--- a/drivers/gpu/drm/tegra/gr3d.c
+++ b/drivers/gpu/drm/tegra/gr3d.c
@@ -12,7 +12,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
-#include <linux/tegra-powergate.h>
+
+#include <soc/tegra/powergate.h>
#include "drm.h"
#include "gem.h"
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 27c979b..eafd0b8 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -11,7 +11,8 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
-#include <linux/tegra-powergate.h>
+
+#include <soc/tegra/powergate.h>
#include <drm/drm_dp_helper.h>
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index 605b5b4..230d06c 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -35,7 +35,8 @@
#include <linux/of_iommu.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-#include <linux/tegra-ahb.h>
+
+#include <soc/tegra/ahb.h>
#include <asm/page.h>
#include <asm/cacheflush.h>
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index 3d15d16..85c2985 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -15,22 +15,31 @@
#include <linux/of_irq.h>
#include <linux/slab.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/irqchip/irq-crossbar.h>
#define IRQ_FREE -1
+#define IRQ_RESERVED -2
+#define IRQ_SKIP -3
#define GIC_IRQ_START 32
-/*
+/**
+ * struct crossbar_device - crossbar device description
* @int_max: maximum number of supported interrupts
+ * @safe_map: safe default value to initialize the crossbar
+ * @max_crossbar_sources: Maximum number of crossbar sources
* @irq_map: array of interrupts to crossbar number mapping
* @crossbar_base: crossbar base address
* @register_offsets: offsets for each irq number
+ * @write: register write function pointer
*/
struct crossbar_device {
uint int_max;
+ uint safe_map;
+ uint max_crossbar_sources;
uint *irq_map;
void __iomem *crossbar_base;
int *register_offsets;
- void (*write) (int, int);
+ void (*write)(int, int);
};
static struct crossbar_device *cb;
@@ -50,11 +59,22 @@
writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
}
+static inline int get_prev_map_irq(int cb_no)
+{
+ int i;
+
+ for (i = cb->int_max - 1; i >= 0; i--)
+ if (cb->irq_map[i] == cb_no)
+ return i;
+
+ return -ENODEV;
+}
+
static inline int allocate_free_irq(int cb_no)
{
int i;
- for (i = 0; i < cb->int_max; i++) {
+ for (i = cb->int_max - 1; i >= 0; i--) {
if (cb->irq_map[i] == IRQ_FREE) {
cb->irq_map[i] = cb_no;
return i;
@@ -64,19 +84,47 @@
return -ENODEV;
}
+static inline bool needs_crossbar_write(irq_hw_number_t hw)
+{
+ int cb_no;
+
+ if (hw > GIC_IRQ_START) {
+ cb_no = cb->irq_map[hw - GIC_IRQ_START];
+ if (cb_no != IRQ_RESERVED && cb_no != IRQ_SKIP)
+ return true;
+ }
+
+ return false;
+}
+
static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
- cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]);
+ if (needs_crossbar_write(hw))
+ cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]);
+
return 0;
}
+/**
+ * crossbar_domain_unmap - unmap a crossbar<->irq connection
+ * @d: domain of irq to unmap
+ * @irq: virq number
+ *
+ * We do not maintain a use count of total number of map/unmap
+ * calls for a particular irq to find out if a irq can be really
+ * unmapped. This is because unmap is called during irq_dispose_mapping(irq),
+ * after which irq is anyways unusable. So an explicit map has to be called
+ * after that.
+ */
static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq)
{
irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq;
- if (hw > GIC_IRQ_START)
+ if (needs_crossbar_write(hw)) {
cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE;
+ cb->write(hw - GIC_IRQ_START, cb->safe_map);
+ }
}
static int crossbar_domain_xlate(struct irq_domain *d,
@@ -85,18 +133,41 @@
unsigned long *out_hwirq,
unsigned int *out_type)
{
- unsigned long ret;
+ int ret;
+ int req_num = intspec[1];
+ int direct_map_num;
- ret = allocate_free_irq(intspec[1]);
+ if (req_num >= cb->max_crossbar_sources) {
+ direct_map_num = req_num - cb->max_crossbar_sources;
+ if (direct_map_num < cb->int_max) {
+ ret = cb->irq_map[direct_map_num];
+ if (ret == IRQ_RESERVED || ret == IRQ_SKIP) {
+ /* We use the interrupt num as h/w irq num */
+ ret = direct_map_num;
+ goto found;
+ }
+ }
- if (IS_ERR_VALUE(ret))
+ pr_err("%s: requested crossbar number %d > max %d\n",
+ __func__, req_num, cb->max_crossbar_sources);
+ return -EINVAL;
+ }
+
+ ret = get_prev_map_irq(req_num);
+ if (ret >= 0)
+ goto found;
+
+ ret = allocate_free_irq(req_num);
+
+ if (ret < 0)
return ret;
+found:
*out_hwirq = ret + GIC_IRQ_START;
return 0;
}
-const struct irq_domain_ops routable_irq_domain_ops = {
+static const struct irq_domain_ops routable_irq_domain_ops = {
.map = crossbar_domain_map,
.unmap = crossbar_domain_unmap,
.xlate = crossbar_domain_xlate
@@ -104,22 +175,36 @@
static int __init crossbar_of_init(struct device_node *node)
{
- int i, size, max, reserved = 0, entry;
+ int i, size, max = 0, reserved = 0, entry;
const __be32 *irqsr;
+ int ret = -ENOMEM;
cb = kzalloc(sizeof(*cb), GFP_KERNEL);
if (!cb)
- return -ENOMEM;
+ return ret;
cb->crossbar_base = of_iomap(node, 0);
if (!cb->crossbar_base)
- goto err1;
+ goto err_cb;
+
+ of_property_read_u32(node, "ti,max-crossbar-sources",
+ &cb->max_crossbar_sources);
+ if (!cb->max_crossbar_sources) {
+ pr_err("missing 'ti,max-crossbar-sources' property\n");
+ ret = -EINVAL;
+ goto err_base;
+ }
of_property_read_u32(node, "ti,max-irqs", &max);
- cb->irq_map = kzalloc(max * sizeof(int), GFP_KERNEL);
+ if (!max) {
+ pr_err("missing 'ti,max-irqs' property\n");
+ ret = -EINVAL;
+ goto err_base;
+ }
+ cb->irq_map = kcalloc(max, sizeof(int), GFP_KERNEL);
if (!cb->irq_map)
- goto err2;
+ goto err_base;
cb->int_max = max;
@@ -137,15 +222,35 @@
i, &entry);
if (entry > max) {
pr_err("Invalid reserved entry\n");
- goto err3;
+ ret = -EINVAL;
+ goto err_irq_map;
}
- cb->irq_map[entry] = 0;
+ cb->irq_map[entry] = IRQ_RESERVED;
}
}
- cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL);
+ /* Skip irqs hardwired to bypass the crossbar */
+ irqsr = of_get_property(node, "ti,irqs-skip", &size);
+ if (irqsr) {
+ size /= sizeof(__be32);
+
+ for (i = 0; i < size; i++) {
+ of_property_read_u32_index(node,
+ "ti,irqs-skip",
+ i, &entry);
+ if (entry > max) {
+ pr_err("Invalid skip entry\n");
+ ret = -EINVAL;
+ goto err_irq_map;
+ }
+ cb->irq_map[entry] = IRQ_SKIP;
+ }
+ }
+
+
+ cb->register_offsets = kcalloc(max, sizeof(int), GFP_KERNEL);
if (!cb->register_offsets)
- goto err3;
+ goto err_irq_map;
of_property_read_u32(node, "ti,reg-size", &size);
@@ -161,7 +266,8 @@
break;
default:
pr_err("Invalid reg-size property\n");
- goto err4;
+ ret = -EINVAL;
+ goto err_reg_offset;
break;
}
@@ -170,25 +276,37 @@
* reserved irqs. so find and store the offsets once.
*/
for (i = 0; i < max; i++) {
- if (!cb->irq_map[i])
+ if (cb->irq_map[i] == IRQ_RESERVED)
continue;
cb->register_offsets[i] = reserved;
reserved += size;
}
+ of_property_read_u32(node, "ti,irqs-safe-map", &cb->safe_map);
+ /* Initialize the crossbar with safe map to start with */
+ for (i = 0; i < max; i++) {
+ if (cb->irq_map[i] == IRQ_RESERVED ||
+ cb->irq_map[i] == IRQ_SKIP)
+ continue;
+
+ cb->write(i, cb->safe_map);
+ }
+
register_routable_domain_ops(&routable_irq_domain_ops);
return 0;
-err4:
+err_reg_offset:
kfree(cb->register_offsets);
-err3:
+err_irq_map:
kfree(cb->irq_map);
-err2:
+err_base:
iounmap(cb->crossbar_base);
-err1:
+err_cb:
kfree(cb);
- return -ENOMEM;
+
+ cb = NULL;
+ return ret;
}
static const struct of_device_id crossbar_match[] __initconst = {
diff --git a/drivers/misc/fuse/Makefile b/drivers/misc/fuse/Makefile
new file mode 100644
index 0000000..0679c4f
--- /dev/null
+++ b/drivers/misc/fuse/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_TEGRA) += tegra/
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 083cf37..a2f0f88 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -41,11 +41,12 @@
#include <linux/reset.h>
#include <linux/sizes.h>
#include <linux/slab.h>
-#include <linux/tegra-cpuidle.h>
-#include <linux/tegra-powergate.h>
#include <linux/vmalloc.h>
#include <linux/regulator/consumer.h>
+#include <soc/tegra/cpuidle.h>
+#include <soc/tegra/powergate.h>
+
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/pci.h>
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 0042ccb..0fa42be 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -328,6 +328,12 @@
bool
select PINCTRL_TEGRA
+config PINCTRL_TEGRA_XUSB
+ def_bool y if ARCH_TEGRA
+ select GENERIC_PHY
+ select PINCONF
+ select PINMUX
+
config PINCTRL_TZ1090
bool "Toumaz Xenif TZ1090 pin control driver"
depends on SOC_TZ1090
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index c4b5d40..df88788 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -55,6 +55,7 @@
obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o
obj-$(CONFIG_PINCTRL_TEGRA124) += pinctrl-tegra124.o
+obj-$(CONFIG_PINCTRL_TEGRA_XUSB) += pinctrl-tegra-xusb.o
obj-$(CONFIG_PINCTRL_TZ1090) += pinctrl-tz1090.o
obj-$(CONFIG_PINCTRL_TZ1090_PDC) += pinctrl-tz1090-pdc.o
obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o
diff --git a/drivers/pinctrl/pinctrl-tegra-xusb.c b/drivers/pinctrl/pinctrl-tegra-xusb.c
new file mode 100644
index 0000000..4a7daf5
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-tegra-xusb.c
@@ -0,0 +1,973 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+
+#include "core.h"
+#include "pinctrl-utils.h"
+
+#define XUSB_PADCTL_ELPG_PROGRAM 0x01c
+#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN (1 << 26)
+#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 25)
+#define XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN (1 << 24)
+
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1 0x040
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL0_LOCKDET (1 << 19)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1_REFCLK_SEL_MASK (0xf << 12)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL_RST (1 << 1)
+
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2 0x044
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2_REFCLKBUF_EN (1 << 6)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_EN (1 << 5)
+#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_SEL (1 << 4)
+
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1 0x138
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_LOCKDET (1 << 27)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_MODE (1 << 24)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD (1 << 3)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_RST (1 << 1)
+#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_IDDQ (1 << 0)
+
+#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1 0x148
+#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD (1 << 1)
+#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ (1 << 0)
+
+struct tegra_xusb_padctl_function {
+ const char *name;
+ const char * const *groups;
+ unsigned int num_groups;
+};
+
+struct tegra_xusb_padctl_group {
+ const unsigned int *funcs;
+ unsigned int num_funcs;
+};
+
+struct tegra_xusb_padctl_soc {
+ const struct pinctrl_pin_desc *pins;
+ unsigned int num_pins;
+
+ const struct tegra_xusb_padctl_function *functions;
+ unsigned int num_functions;
+
+ const struct tegra_xusb_padctl_lane *lanes;
+ unsigned int num_lanes;
+};
+
+struct tegra_xusb_padctl_lane {
+ const char *name;
+
+ unsigned int offset;
+ unsigned int shift;
+ unsigned int mask;
+ unsigned int iddq;
+
+ const unsigned int *funcs;
+ unsigned int num_funcs;
+};
+
+struct tegra_xusb_padctl {
+ struct device *dev;
+ void __iomem *regs;
+ struct mutex lock;
+ struct reset_control *rst;
+
+ const struct tegra_xusb_padctl_soc *soc;
+ struct pinctrl_dev *pinctrl;
+ struct pinctrl_desc desc;
+
+ struct phy_provider *provider;
+ struct phy *phys[2];
+
+ unsigned int enable;
+};
+
+static inline void padctl_writel(struct tegra_xusb_padctl *padctl, u32 value,
+ unsigned long offset)
+{
+ writel(value, padctl->regs + offset);
+}
+
+static inline u32 padctl_readl(struct tegra_xusb_padctl *padctl,
+ unsigned long offset)
+{
+ return readl(padctl->regs + offset);
+}
+
+static int tegra_xusb_padctl_get_groups_count(struct pinctrl_dev *pinctrl)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ return padctl->soc->num_pins;
+}
+
+static const char *tegra_xusb_padctl_get_group_name(struct pinctrl_dev *pinctrl,
+ unsigned int group)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ return padctl->soc->pins[group].name;
+}
+
+enum tegra_xusb_padctl_param {
+ TEGRA_XUSB_PADCTL_IDDQ,
+};
+
+static const struct tegra_xusb_padctl_property {
+ const char *name;
+ enum tegra_xusb_padctl_param param;
+} properties[] = {
+ { "nvidia,iddq", TEGRA_XUSB_PADCTL_IDDQ },
+};
+
+#define TEGRA_XUSB_PADCTL_PACK(param, value) ((param) << 16 | (value))
+#define TEGRA_XUSB_PADCTL_UNPACK_PARAM(config) ((config) >> 16)
+#define TEGRA_XUSB_PADCTL_UNPACK_VALUE(config) ((config) & 0xffff)
+
+static int tegra_xusb_padctl_parse_subnode(struct tegra_xusb_padctl *padctl,
+ struct device_node *np,
+ struct pinctrl_map **maps,
+ unsigned int *reserved_maps,
+ unsigned int *num_maps)
+{
+ unsigned int i, reserve = 0, num_configs = 0;
+ unsigned long config, *configs = NULL;
+ const char *function, *group;
+ struct property *prop;
+ int err = 0;
+ u32 value;
+
+ err = of_property_read_string(np, "nvidia,function", &function);
+ if (err < 0) {
+ if (err != -EINVAL)
+ return err;
+
+ function = NULL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(properties); i++) {
+ err = of_property_read_u32(np, properties[i].name, &value);
+ if (err < 0) {
+ if (err == -EINVAL)
+ continue;
+
+ return err;
+ }
+
+ config = TEGRA_XUSB_PADCTL_PACK(properties[i].param, value);
+
+ err = pinctrl_utils_add_config(padctl->pinctrl, &configs,
+ &num_configs, config);
+ if (err < 0)
+ return err;
+ }
+
+ if (function)
+ reserve++;
+
+ if (num_configs)
+ reserve++;
+
+ err = of_property_count_strings(np, "nvidia,lanes");
+ if (err < 0)
+ return err;
+
+ reserve *= err;
+
+ err = pinctrl_utils_reserve_map(padctl->pinctrl, maps, reserved_maps,
+ num_maps, reserve);
+ if (err < 0)
+ return err;
+
+ of_property_for_each_string(np, "nvidia,lanes", prop, group) {
+ if (function) {
+ err = pinctrl_utils_add_map_mux(padctl->pinctrl, maps,
+ reserved_maps, num_maps, group,
+ function);
+ if (err < 0)
+ return err;
+ }
+
+ if (num_configs) {
+ err = pinctrl_utils_add_map_configs(padctl->pinctrl,
+ maps, reserved_maps, num_maps, group,
+ configs, num_configs,
+ PIN_MAP_TYPE_CONFIGS_GROUP);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static int tegra_xusb_padctl_dt_node_to_map(struct pinctrl_dev *pinctrl,
+ struct device_node *parent,
+ struct pinctrl_map **maps,
+ unsigned int *num_maps)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+ unsigned int reserved_maps = 0;
+ struct device_node *np;
+ int err;
+
+ *num_maps = 0;
+ *maps = NULL;
+
+ for_each_child_of_node(parent, np) {
+ err = tegra_xusb_padctl_parse_subnode(padctl, np, maps,
+ &reserved_maps,
+ num_maps);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct pinctrl_ops tegra_xusb_padctl_pinctrl_ops = {
+ .get_groups_count = tegra_xusb_padctl_get_groups_count,
+ .get_group_name = tegra_xusb_padctl_get_group_name,
+ .dt_node_to_map = tegra_xusb_padctl_dt_node_to_map,
+ .dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int tegra_xusb_padctl_get_functions_count(struct pinctrl_dev *pinctrl)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ return padctl->soc->num_functions;
+}
+
+static const char *
+tegra_xusb_padctl_get_function_name(struct pinctrl_dev *pinctrl,
+ unsigned int function)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ return padctl->soc->functions[function].name;
+}
+
+static int tegra_xusb_padctl_get_function_groups(struct pinctrl_dev *pinctrl,
+ unsigned int function,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+
+ *num_groups = padctl->soc->functions[function].num_groups;
+ *groups = padctl->soc->functions[function].groups;
+
+ return 0;
+}
+
+static int tegra_xusb_padctl_pinmux_enable(struct pinctrl_dev *pinctrl,
+ unsigned int function,
+ unsigned int group)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+ const struct tegra_xusb_padctl_lane *lane;
+ unsigned int i;
+ u32 value;
+
+ lane = &padctl->soc->lanes[group];
+
+ for (i = 0; i < lane->num_funcs; i++)
+ if (lane->funcs[i] == function)
+ break;
+
+ if (i >= lane->num_funcs)
+ return -EINVAL;
+
+ value = padctl_readl(padctl, lane->offset);
+ value &= ~(lane->mask << lane->shift);
+ value |= i << lane->shift;
+ padctl_writel(padctl, value, lane->offset);
+
+ return 0;
+}
+
+static const struct pinmux_ops tegra_xusb_padctl_pinmux_ops = {
+ .get_functions_count = tegra_xusb_padctl_get_functions_count,
+ .get_function_name = tegra_xusb_padctl_get_function_name,
+ .get_function_groups = tegra_xusb_padctl_get_function_groups,
+ .enable = tegra_xusb_padctl_pinmux_enable,
+};
+
+static int tegra_xusb_padctl_pinconf_group_get(struct pinctrl_dev *pinctrl,
+ unsigned int group,
+ unsigned long *config)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+ const struct tegra_xusb_padctl_lane *lane;
+ enum tegra_xusb_padctl_param param;
+ u32 value;
+
+ param = TEGRA_XUSB_PADCTL_UNPACK_PARAM(*config);
+ lane = &padctl->soc->lanes[group];
+
+ switch (param) {
+ case TEGRA_XUSB_PADCTL_IDDQ:
+ /* lanes with iddq == 0 don't support this parameter */
+ if (lane->iddq == 0)
+ return -EINVAL;
+
+ value = padctl_readl(padctl, lane->offset);
+
+ if (value & BIT(lane->iddq))
+ value = 0;
+ else
+ value = 1;
+
+ *config = TEGRA_XUSB_PADCTL_PACK(param, value);
+ break;
+
+ default:
+ dev_err(padctl->dev, "invalid configuration parameter: %04x\n",
+ param);
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int tegra_xusb_padctl_pinconf_group_set(struct pinctrl_dev *pinctrl,
+ unsigned int group,
+ unsigned long *configs,
+ unsigned int num_configs)
+{
+ struct tegra_xusb_padctl *padctl = pinctrl_dev_get_drvdata(pinctrl);
+ const struct tegra_xusb_padctl_lane *lane;
+ enum tegra_xusb_padctl_param param;
+ unsigned long value;
+ unsigned int i;
+ u32 regval;
+
+ lane = &padctl->soc->lanes[group];
+
+ for (i = 0; i < num_configs; i++) {
+ param = TEGRA_XUSB_PADCTL_UNPACK_PARAM(configs[i]);
+ value = TEGRA_XUSB_PADCTL_UNPACK_VALUE(configs[i]);
+
+ switch (param) {
+ case TEGRA_XUSB_PADCTL_IDDQ:
+ /* lanes with iddq == 0 don't support this parameter */
+ if (lane->iddq == 0)
+ return -EINVAL;
+
+ regval = padctl_readl(padctl, lane->offset);
+
+ if (value)
+ regval &= ~BIT(lane->iddq);
+ else
+ regval |= BIT(lane->iddq);
+
+ padctl_writel(padctl, regval, lane->offset);
+ break;
+
+ default:
+ dev_err(padctl->dev,
+ "invalid configuration parameter: %04x\n",
+ param);
+ return -ENOTSUPP;
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static const char *strip_prefix(const char *s)
+{
+ const char *comma = strchr(s, ',');
+ if (!comma)
+ return s;
+
+ return comma + 1;
+}
+
+static void
+tegra_xusb_padctl_pinconf_group_dbg_show(struct pinctrl_dev *pinctrl,
+ struct seq_file *s,
+ unsigned int group)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(properties); i++) {
+ unsigned long config, value;
+ int err;
+
+ config = TEGRA_XUSB_PADCTL_PACK(properties[i].param, 0);
+
+ err = tegra_xusb_padctl_pinconf_group_get(pinctrl, group,
+ &config);
+ if (err < 0)
+ continue;
+
+ value = TEGRA_XUSB_PADCTL_UNPACK_VALUE(config);
+
+ seq_printf(s, "\n\t%s=%lu\n", strip_prefix(properties[i].name),
+ value);
+ }
+}
+
+static void
+tegra_xusb_padctl_pinconf_config_dbg_show(struct pinctrl_dev *pinctrl,
+ struct seq_file *s,
+ unsigned long config)
+{
+ enum tegra_xusb_padctl_param param;
+ const char *name = "unknown";
+ unsigned long value;
+ unsigned int i;
+
+ param = TEGRA_XUSB_PADCTL_UNPACK_PARAM(config);
+ value = TEGRA_XUSB_PADCTL_UNPACK_VALUE(config);
+
+ for (i = 0; i < ARRAY_SIZE(properties); i++) {
+ if (properties[i].param == param) {
+ name = properties[i].name;
+ break;
+ }
+ }
+
+ seq_printf(s, "%s=%lu", strip_prefix(name), value);
+}
+#endif
+
+static const struct pinconf_ops tegra_xusb_padctl_pinconf_ops = {
+ .pin_config_group_get = tegra_xusb_padctl_pinconf_group_get,
+ .pin_config_group_set = tegra_xusb_padctl_pinconf_group_set,
+#ifdef CONFIG_DEBUG_FS
+ .pin_config_group_dbg_show = tegra_xusb_padctl_pinconf_group_dbg_show,
+ .pin_config_config_dbg_show = tegra_xusb_padctl_pinconf_config_dbg_show,
+#endif
+};
+
+static int tegra_xusb_padctl_enable(struct tegra_xusb_padctl *padctl)
+{
+ u32 value;
+
+ mutex_lock(&padctl->lock);
+
+ if (padctl->enable++ > 0)
+ goto out;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+ usleep_range(100, 200);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+ usleep_range(100, 200);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value &= ~XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+out:
+ mutex_unlock(&padctl->lock);
+ return 0;
+}
+
+static int tegra_xusb_padctl_disable(struct tegra_xusb_padctl *padctl)
+{
+ u32 value;
+
+ mutex_lock(&padctl->lock);
+
+ if (WARN_ON(padctl->enable == 0))
+ goto out;
+
+ if (--padctl->enable > 0)
+ goto out;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+ usleep_range(100, 200);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+ usleep_range(100, 200);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM);
+ value |= XUSB_PADCTL_ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
+ padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM);
+
+out:
+ mutex_unlock(&padctl->lock);
+ return 0;
+}
+
+static int tegra_xusb_phy_init(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+
+ return tegra_xusb_padctl_enable(padctl);
+}
+
+static int tegra_xusb_phy_exit(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+
+ return tegra_xusb_padctl_disable(padctl);
+}
+
+static int pcie_phy_power_on(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+ unsigned long timeout;
+ int err = -ETIMEDOUT;
+ u32 value;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_P0_CTL1_REFCLK_SEL_MASK;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL2);
+ value |= XUSB_PADCTL_IOPHY_PLL_P0_CTL2_REFCLKBUF_EN |
+ XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_EN |
+ XUSB_PADCTL_IOPHY_PLL_P0_CTL2_TXCLKREF_SEL;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL2);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+ value |= XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL_RST;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+
+ timeout = jiffies + msecs_to_jiffies(50);
+
+ while (time_before(jiffies, timeout)) {
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+ if (value & XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL0_LOCKDET) {
+ err = 0;
+ break;
+ }
+
+ usleep_range(100, 200);
+ }
+
+ return err;
+}
+
+static int pcie_phy_power_off(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+ u32 value;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_P0_CTL1_PLL_RST;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
+
+ return 0;
+}
+
+static const struct phy_ops pcie_phy_ops = {
+ .init = tegra_xusb_phy_init,
+ .exit = tegra_xusb_phy_exit,
+ .power_on = pcie_phy_power_on,
+ .power_off = pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int sata_phy_power_on(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+ unsigned long timeout;
+ int err = -ETIMEDOUT;
+ u32 value;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
+ value &= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
+ value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_IDDQ;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_MODE;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_RST;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ timeout = jiffies + msecs_to_jiffies(50);
+
+ while (time_before(jiffies, timeout)) {
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ if (value & XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_LOCKDET) {
+ err = 0;
+ break;
+ }
+
+ usleep_range(100, 200);
+ }
+
+ return err;
+}
+
+static int sata_phy_power_off(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl = phy_get_drvdata(phy);
+ u32 value;
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_RST;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value &= ~XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL1_MODE;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+ value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
+ value |= XUSB_PADCTL_IOPHY_PLL_S0_CTL1_PLL_IDDQ;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+ value |= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
+ value |= ~XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1_IDDQ;
+ padctl_writel(padctl, value, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
+
+ return 0;
+}
+
+static const struct phy_ops sata_phy_ops = {
+ .init = tegra_xusb_phy_init,
+ .exit = tegra_xusb_phy_exit,
+ .power_on = sata_phy_power_on,
+ .power_off = sata_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *tegra_xusb_padctl_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct tegra_xusb_padctl *padctl = dev_get_drvdata(dev);
+ unsigned int index = args->args[0];
+
+ if (args->args_count <= 0)
+ return ERR_PTR(-EINVAL);
+
+ if (index > ARRAY_SIZE(padctl->phys))
+ return ERR_PTR(-EINVAL);
+
+ return padctl->phys[index];
+}
+
+#define PIN_OTG_0 0
+#define PIN_OTG_1 1
+#define PIN_OTG_2 2
+#define PIN_ULPI_0 3
+#define PIN_HSIC_0 4
+#define PIN_HSIC_1 5
+#define PIN_PCIE_0 6
+#define PIN_PCIE_1 7
+#define PIN_PCIE_2 8
+#define PIN_PCIE_3 9
+#define PIN_PCIE_4 10
+#define PIN_SATA_0 11
+
+static const struct pinctrl_pin_desc tegra124_pins[] = {
+ PINCTRL_PIN(PIN_OTG_0, "otg-0"),
+ PINCTRL_PIN(PIN_OTG_1, "otg-1"),
+ PINCTRL_PIN(PIN_OTG_2, "otg-2"),
+ PINCTRL_PIN(PIN_ULPI_0, "ulpi-0"),
+ PINCTRL_PIN(PIN_HSIC_0, "hsic-0"),
+ PINCTRL_PIN(PIN_HSIC_1, "hsic-1"),
+ PINCTRL_PIN(PIN_PCIE_0, "pcie-0"),
+ PINCTRL_PIN(PIN_PCIE_1, "pcie-1"),
+ PINCTRL_PIN(PIN_PCIE_2, "pcie-2"),
+ PINCTRL_PIN(PIN_PCIE_3, "pcie-3"),
+ PINCTRL_PIN(PIN_PCIE_4, "pcie-4"),
+ PINCTRL_PIN(PIN_SATA_0, "sata-0"),
+};
+
+static const char * const tegra124_snps_groups[] = {
+ "otg-0",
+ "otg-1",
+ "otg-2",
+ "ulpi-0",
+ "hsic-0",
+ "hsic-1",
+};
+
+static const char * const tegra124_xusb_groups[] = {
+ "otg-0",
+ "otg-1",
+ "otg-2",
+ "ulpi-0",
+ "hsic-0",
+ "hsic-1",
+};
+
+static const char * const tegra124_uart_groups[] = {
+ "otg-0",
+ "otg-1",
+ "otg-2",
+};
+
+static const char * const tegra124_pcie_groups[] = {
+ "pcie-0",
+ "pcie-1",
+ "pcie-2",
+ "pcie-3",
+ "pcie-4",
+ "sata-0",
+};
+
+static const char * const tegra124_usb3_groups[] = {
+ "pcie-0",
+ "pcie-1",
+ "pcie-2",
+ "pcie-3",
+ "pcie-4",
+ "sata-0",
+};
+
+static const char * const tegra124_sata_groups[] = {
+ "pcie-0",
+ "pcie-1",
+ "pcie-2",
+ "pcie-3",
+ "pcie-4",
+ "sata-0",
+};
+
+static const char * const tegra124_rsvd_groups[] = {
+ "otg-0",
+ "otg-1",
+ "otg-2",
+ "pcie-0",
+ "pcie-1",
+ "pcie-2",
+ "pcie-3",
+ "pcie-4",
+ "sata-0",
+};
+
+#define TEGRA124_FUNCTION(_name) \
+ { \
+ .name = #_name, \
+ .num_groups = ARRAY_SIZE(tegra124_##_name##_groups), \
+ .groups = tegra124_##_name##_groups, \
+ }
+
+static struct tegra_xusb_padctl_function tegra124_functions[] = {
+ TEGRA124_FUNCTION(snps),
+ TEGRA124_FUNCTION(xusb),
+ TEGRA124_FUNCTION(uart),
+ TEGRA124_FUNCTION(pcie),
+ TEGRA124_FUNCTION(usb3),
+ TEGRA124_FUNCTION(sata),
+ TEGRA124_FUNCTION(rsvd),
+};
+
+enum tegra124_function {
+ TEGRA124_FUNC_SNPS,
+ TEGRA124_FUNC_XUSB,
+ TEGRA124_FUNC_UART,
+ TEGRA124_FUNC_PCIE,
+ TEGRA124_FUNC_USB3,
+ TEGRA124_FUNC_SATA,
+ TEGRA124_FUNC_RSVD,
+};
+
+static const unsigned int tegra124_otg_functions[] = {
+ TEGRA124_FUNC_SNPS,
+ TEGRA124_FUNC_XUSB,
+ TEGRA124_FUNC_UART,
+ TEGRA124_FUNC_RSVD,
+};
+
+static const unsigned int tegra124_usb_functions[] = {
+ TEGRA124_FUNC_SNPS,
+ TEGRA124_FUNC_XUSB,
+};
+
+static const unsigned int tegra124_pci_functions[] = {
+ TEGRA124_FUNC_PCIE,
+ TEGRA124_FUNC_USB3,
+ TEGRA124_FUNC_SATA,
+ TEGRA124_FUNC_RSVD,
+};
+
+#define TEGRA124_LANE(_name, _offset, _shift, _mask, _iddq, _funcs) \
+ { \
+ .name = _name, \
+ .offset = _offset, \
+ .shift = _shift, \
+ .mask = _mask, \
+ .iddq = _iddq, \
+ .num_funcs = ARRAY_SIZE(tegra124_##_funcs##_functions), \
+ .funcs = tegra124_##_funcs##_functions, \
+ }
+
+static const struct tegra_xusb_padctl_lane tegra124_lanes[] = {
+ TEGRA124_LANE("otg-0", 0x004, 0, 0x3, 0, otg),
+ TEGRA124_LANE("otg-1", 0x004, 2, 0x3, 0, otg),
+ TEGRA124_LANE("otg-2", 0x004, 4, 0x3, 0, otg),
+ TEGRA124_LANE("ulpi-0", 0x004, 12, 0x1, 0, usb),
+ TEGRA124_LANE("hsic-0", 0x004, 14, 0x1, 0, usb),
+ TEGRA124_LANE("hsic-1", 0x004, 15, 0x1, 0, usb),
+ TEGRA124_LANE("pcie-0", 0x134, 16, 0x3, 1, pci),
+ TEGRA124_LANE("pcie-1", 0x134, 18, 0x3, 2, pci),
+ TEGRA124_LANE("pcie-2", 0x134, 20, 0x3, 3, pci),
+ TEGRA124_LANE("pcie-3", 0x134, 22, 0x3, 4, pci),
+ TEGRA124_LANE("pcie-4", 0x134, 24, 0x3, 5, pci),
+ TEGRA124_LANE("sata-0", 0x134, 26, 0x3, 6, pci),
+};
+
+static const struct tegra_xusb_padctl_soc tegra124_soc = {
+ .num_pins = ARRAY_SIZE(tegra124_pins),
+ .pins = tegra124_pins,
+ .num_functions = ARRAY_SIZE(tegra124_functions),
+ .functions = tegra124_functions,
+ .num_lanes = ARRAY_SIZE(tegra124_lanes),
+ .lanes = tegra124_lanes,
+};
+
+static const struct of_device_id tegra_xusb_padctl_of_match[] = {
+ { .compatible = "nvidia,tegra124-xusb-padctl", .data = &tegra124_soc },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tegra_xusb_padctl_of_match);
+
+static int tegra_xusb_padctl_probe(struct platform_device *pdev)
+{
+ struct tegra_xusb_padctl *padctl;
+ const struct of_device_id *match;
+ struct resource *res;
+ struct phy *phy;
+ int err;
+
+ padctl = devm_kzalloc(&pdev->dev, sizeof(*padctl), GFP_KERNEL);
+ if (!padctl)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, padctl);
+ mutex_init(&padctl->lock);
+ padctl->dev = &pdev->dev;
+
+ match = of_match_node(tegra_xusb_padctl_of_match, pdev->dev.of_node);
+ padctl->soc = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ padctl->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(padctl->regs))
+ return PTR_ERR(padctl->regs);
+
+ padctl->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(padctl->rst))
+ return PTR_ERR(padctl->rst);
+
+ err = reset_control_deassert(padctl->rst);
+ if (err < 0)
+ return err;
+
+ memset(&padctl->desc, 0, sizeof(padctl->desc));
+ padctl->desc.name = dev_name(padctl->dev);
+ padctl->desc.pctlops = &tegra_xusb_padctl_pinctrl_ops;
+ padctl->desc.pmxops = &tegra_xusb_padctl_pinmux_ops;
+ padctl->desc.confops = &tegra_xusb_padctl_pinconf_ops;
+ padctl->desc.owner = THIS_MODULE;
+
+ padctl->pinctrl = pinctrl_register(&padctl->desc, &pdev->dev, padctl);
+ if (!padctl->pinctrl) {
+ dev_err(&pdev->dev, "failed to register pincontrol\n");
+ err = -ENODEV;
+ goto reset;
+ }
+
+ phy = devm_phy_create(&pdev->dev, &pcie_phy_ops, NULL);
+ if (IS_ERR(phy)) {
+ err = PTR_ERR(phy);
+ goto unregister;
+ }
+
+ padctl->phys[TEGRA_XUSB_PADCTL_PCIE] = phy;
+ phy_set_drvdata(phy, padctl);
+
+ phy = devm_phy_create(&pdev->dev, &sata_phy_ops, NULL);
+ if (IS_ERR(phy)) {
+ err = PTR_ERR(phy);
+ goto unregister;
+ }
+
+ padctl->phys[TEGRA_XUSB_PADCTL_SATA] = phy;
+ phy_set_drvdata(phy, padctl);
+
+ padctl->provider = devm_of_phy_provider_register(&pdev->dev,
+ tegra_xusb_padctl_xlate);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to register PHYs: %d\n", err);
+ goto unregister;
+ }
+
+ return 0;
+
+unregister:
+ pinctrl_unregister(padctl->pinctrl);
+reset:
+ reset_control_assert(padctl->rst);
+ return err;
+}
+
+static int tegra_xusb_padctl_remove(struct platform_device *pdev)
+{
+ struct tegra_xusb_padctl *padctl = platform_get_drvdata(pdev);
+ int err;
+
+ pinctrl_unregister(padctl->pinctrl);
+
+ err = reset_control_assert(padctl->rst);
+ if (err < 0)
+ dev_err(&pdev->dev, "failed to assert reset: %d\n", err);
+
+ return err;
+}
+
+static struct platform_driver tegra_xusb_padctl_driver = {
+ .driver = {
+ .name = "tegra-xusb-padctl",
+ .of_match_table = tegra_xusb_padctl_of_match,
+ },
+ .probe = tegra_xusb_padctl_probe,
+ .remove = tegra_xusb_padctl_remove,
+};
+module_platform_driver(tegra_xusb_padctl_driver);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("Tegra 124 XUSB Pad Control driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 0f7c447..3b1b95d 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -3,3 +3,4 @@
#
obj-$(CONFIG_ARCH_QCOM) += qcom/
+obj-$(CONFIG_ARCH_TEGRA) += tegra/
diff --git a/drivers/soc/tegra/Makefile b/drivers/soc/tegra/Makefile
new file mode 100644
index 0000000..236600f
--- /dev/null
+++ b/drivers/soc/tegra/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_TEGRA) += fuse/
diff --git a/drivers/soc/tegra/fuse/Makefile b/drivers/soc/tegra/fuse/Makefile
new file mode 100644
index 0000000..3af357d
--- /dev/null
+++ b/drivers/soc/tegra/fuse/Makefile
@@ -0,0 +1,8 @@
+obj-y += fuse-tegra.o
+obj-y += fuse-tegra30.o
+obj-y += tegra-apbmisc.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += fuse-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += speedo-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += speedo-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_114_SOC) += speedo-tegra114.o
+obj-$(CONFIG_ARCH_TEGRA_124_SOC) += speedo-tegra124.o
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
new file mode 100644
index 0000000..03742ed
--- /dev/null
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/kobject.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "fuse.h"
+
+static u32 (*fuse_readl)(const unsigned int offset);
+static int fuse_size;
+struct tegra_sku_info tegra_sku_info;
+
+static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
+ [TEGRA_REVISION_UNKNOWN] = "unknown",
+ [TEGRA_REVISION_A01] = "A01",
+ [TEGRA_REVISION_A02] = "A02",
+ [TEGRA_REVISION_A03] = "A03",
+ [TEGRA_REVISION_A03p] = "A03 prime",
+ [TEGRA_REVISION_A04] = "A04",
+};
+
+static u8 fuse_readb(const unsigned int offset)
+{
+ u32 val;
+
+ val = fuse_readl(round_down(offset, 4));
+ val >>= (offset % 4) * 8;
+ val &= 0xff;
+
+ return val;
+}
+
+static ssize_t fuse_read(struct file *fd, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t pos, size_t size)
+{
+ int i;
+
+ if (pos < 0 || pos >= fuse_size)
+ return 0;
+
+ if (size > fuse_size - pos)
+ size = fuse_size - pos;
+
+ for (i = 0; i < size; i++)
+ buf[i] = fuse_readb(pos + i);
+
+ return i;
+}
+
+static struct bin_attribute fuse_bin_attr = {
+ .attr = { .name = "fuse", .mode = S_IRUGO, },
+ .read = fuse_read,
+};
+
+static const struct of_device_id car_match[] __initconst = {
+ { .compatible = "nvidia,tegra20-car", },
+ { .compatible = "nvidia,tegra30-car", },
+ { .compatible = "nvidia,tegra114-car", },
+ { .compatible = "nvidia,tegra124-car", },
+ {},
+};
+
+static void tegra_enable_fuse_clk(void __iomem *base)
+{
+ u32 reg;
+
+ reg = readl_relaxed(base + 0x48);
+ reg |= 1 << 28;
+ writel(reg, base + 0x48);
+
+ /*
+ * Enable FUSE clock. This needs to be hardcoded because the clock
+ * subsystem is not active during early boot.
+ */
+ reg = readl(base + 0x14);
+ reg |= 1 << 7;
+ writel(reg, base + 0x14);
+}
+
+int tegra_fuse_readl(unsigned long offset, u32 *value)
+{
+ if (!fuse_readl)
+ return -EPROBE_DEFER;
+
+ *value = fuse_readl(offset);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_fuse_readl);
+
+int tegra_fuse_create_sysfs(struct device *dev, int size,
+ u32 (*readl)(const unsigned int offset))
+{
+ if (fuse_size)
+ return -ENODEV;
+
+ fuse_bin_attr.size = size;
+ fuse_bin_attr.read = fuse_read;
+
+ fuse_size = size;
+ fuse_readl = readl;
+
+ return device_create_bin_file(dev, &fuse_bin_attr);
+}
+
+void __init tegra_init_fuse(void)
+{
+ struct device_node *np;
+ void __iomem *car_base;
+
+ tegra_init_apbmisc();
+
+ np = of_find_matching_node(NULL, car_match);
+ car_base = of_iomap(np, 0);
+ if (car_base) {
+ tegra_enable_fuse_clk(car_base);
+ iounmap(car_base);
+ } else {
+ pr_err("Could not enable fuse clk. ioremap tegra car failed.\n");
+ return;
+ }
+
+ if (tegra_get_chip_id() == TEGRA20)
+ tegra20_init_fuse_early();
+ else
+ tegra30_init_fuse_early();
+
+ pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
+ tegra_revision_name[tegra_sku_info.revision],
+ tegra_sku_info.sku_id, tegra_sku_info.cpu_process_id,
+ tegra_sku_info.core_process_id);
+ pr_debug("Tegra CPU Speedo ID %d, Soc Speedo ID %d\n",
+ tegra_sku_info.cpu_speedo_id, tegra_sku_info.soc_speedo_id);
+}
diff --git a/drivers/soc/tegra/fuse/fuse-tegra20.c b/drivers/soc/tegra/fuse/fuse-tegra20.c
new file mode 100644
index 0000000..7cb63ab
--- /dev/null
+++ b/drivers/soc/tegra/fuse/fuse-tegra20.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Based on drivers/misc/eeprom/sunxi_sid.c
+ */
+
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "fuse.h"
+
+#define FUSE_BEGIN 0x100
+#define FUSE_SIZE 0x1f8
+#define FUSE_UID_LOW 0x08
+#define FUSE_UID_HIGH 0x0c
+
+static phys_addr_t fuse_phys;
+static struct clk *fuse_clk;
+static void __iomem __initdata *fuse_base;
+
+static DEFINE_MUTEX(apb_dma_lock);
+static DECLARE_COMPLETION(apb_dma_wait);
+static struct dma_chan *apb_dma_chan;
+static struct dma_slave_config dma_sconfig;
+static u32 *apb_buffer;
+static dma_addr_t apb_buffer_phys;
+
+static void apb_dma_complete(void *args)
+{
+ complete(&apb_dma_wait);
+}
+
+static u32 tegra20_fuse_readl(const unsigned int offset)
+{
+ int ret;
+ u32 val = 0;
+ struct dma_async_tx_descriptor *dma_desc;
+
+ mutex_lock(&apb_dma_lock);
+
+ dma_sconfig.src_addr = fuse_phys + FUSE_BEGIN + offset;
+ ret = dmaengine_slave_config(apb_dma_chan, &dma_sconfig);
+ if (ret)
+ goto out;
+
+ dma_desc = dmaengine_prep_slave_single(apb_dma_chan, apb_buffer_phys,
+ sizeof(u32), DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!dma_desc)
+ goto out;
+
+ dma_desc->callback = apb_dma_complete;
+ dma_desc->callback_param = NULL;
+
+ reinit_completion(&apb_dma_wait);
+
+ clk_prepare_enable(fuse_clk);
+
+ dmaengine_submit(dma_desc);
+ dma_async_issue_pending(apb_dma_chan);
+ ret = wait_for_completion_timeout(&apb_dma_wait, msecs_to_jiffies(50));
+
+ if (WARN(ret == 0, "apb read dma timed out"))
+ dmaengine_terminate_all(apb_dma_chan);
+ else
+ val = *apb_buffer;
+
+ clk_disable_unprepare(fuse_clk);
+out:
+ mutex_unlock(&apb_dma_lock);
+
+ return val;
+}
+
+static const struct of_device_id tegra20_fuse_of_match[] = {
+ { .compatible = "nvidia,tegra20-efuse" },
+ {},
+};
+
+static int apb_dma_init(void)
+{
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ apb_dma_chan = dma_request_channel(mask, NULL, NULL);
+ if (!apb_dma_chan)
+ return -EPROBE_DEFER;
+
+ apb_buffer = dma_alloc_coherent(NULL, sizeof(u32), &apb_buffer_phys,
+ GFP_KERNEL);
+ if (!apb_buffer) {
+ dma_release_channel(apb_dma_chan);
+ return -ENOMEM;
+ }
+
+ dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dma_sconfig.src_maxburst = 1;
+ dma_sconfig.dst_maxburst = 1;
+
+ return 0;
+}
+
+static int tegra20_fuse_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int err;
+
+ fuse_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(fuse_clk)) {
+ dev_err(&pdev->dev, "missing clock");
+ return PTR_ERR(fuse_clk);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ fuse_phys = res->start;
+
+ err = apb_dma_init();
+ if (err)
+ return err;
+
+ if (tegra_fuse_create_sysfs(&pdev->dev, FUSE_SIZE, tegra20_fuse_readl))
+ return -ENODEV;
+
+ dev_dbg(&pdev->dev, "loaded\n");
+
+ return 0;
+}
+
+static struct platform_driver tegra20_fuse_driver = {
+ .probe = tegra20_fuse_probe,
+ .driver = {
+ .name = "tegra20_fuse",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra20_fuse_of_match,
+ }
+};
+
+static int __init tegra20_fuse_init(void)
+{
+ return platform_driver_register(&tegra20_fuse_driver);
+}
+postcore_initcall(tegra20_fuse_init);
+
+/* Early boot code. This code is called before the devices are created */
+
+u32 __init tegra20_fuse_early(const unsigned int offset)
+{
+ return readl_relaxed(fuse_base + FUSE_BEGIN + offset);
+}
+
+bool __init tegra20_spare_fuse_early(int spare_bit)
+{
+ u32 offset = spare_bit * 4;
+ bool value;
+
+ value = tegra20_fuse_early(offset + 0x100);
+
+ return value;
+}
+
+static void __init tegra20_fuse_add_randomness(void)
+{
+ u32 randomness[7];
+
+ randomness[0] = tegra_sku_info.sku_id;
+ randomness[1] = tegra_read_straps();
+ randomness[2] = tegra_read_chipid();
+ randomness[3] = tegra_sku_info.cpu_process_id << 16;
+ randomness[3] |= tegra_sku_info.core_process_id;
+ randomness[4] = tegra_sku_info.cpu_speedo_id << 16;
+ randomness[4] |= tegra_sku_info.soc_speedo_id;
+ randomness[5] = tegra20_fuse_early(FUSE_UID_LOW);
+ randomness[6] = tegra20_fuse_early(FUSE_UID_HIGH);
+
+ add_device_randomness(randomness, sizeof(randomness));
+}
+
+void __init tegra20_init_fuse_early(void)
+{
+ fuse_base = ioremap(TEGRA_FUSE_BASE, TEGRA_FUSE_SIZE);
+
+ tegra_init_revision();
+ tegra20_init_speedo_data(&tegra_sku_info);
+ tegra20_fuse_add_randomness();
+
+ iounmap(fuse_base);
+}
diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
new file mode 100644
index 0000000..5999cf3
--- /dev/null
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "fuse.h"
+
+#define FUSE_BEGIN 0x100
+
+/* Tegra30 and later */
+#define FUSE_VENDOR_CODE 0x100
+#define FUSE_FAB_CODE 0x104
+#define FUSE_LOT_CODE_0 0x108
+#define FUSE_LOT_CODE_1 0x10c
+#define FUSE_WAFER_ID 0x110
+#define FUSE_X_COORDINATE 0x114
+#define FUSE_Y_COORDINATE 0x118
+
+#define FUSE_HAS_REVISION_INFO BIT(0)
+
+enum speedo_idx {
+ SPEEDO_TEGRA30 = 0,
+ SPEEDO_TEGRA114,
+ SPEEDO_TEGRA124,
+};
+
+struct tegra_fuse_info {
+ int size;
+ int spare_bit;
+ enum speedo_idx speedo_idx;
+};
+
+static void __iomem *fuse_base;
+static struct clk *fuse_clk;
+static struct tegra_fuse_info *fuse_info;
+
+u32 tegra30_fuse_readl(const unsigned int offset)
+{
+ u32 val;
+
+ /*
+ * early in the boot, the fuse clock will be enabled by
+ * tegra_init_fuse()
+ */
+
+ if (fuse_clk)
+ clk_prepare_enable(fuse_clk);
+
+ val = readl_relaxed(fuse_base + FUSE_BEGIN + offset);
+
+ if (fuse_clk)
+ clk_disable_unprepare(fuse_clk);
+
+ return val;
+}
+
+static struct tegra_fuse_info tegra30_info = {
+ .size = 0x2a4,
+ .spare_bit = 0x144,
+ .speedo_idx = SPEEDO_TEGRA30,
+};
+
+static struct tegra_fuse_info tegra114_info = {
+ .size = 0x2a0,
+ .speedo_idx = SPEEDO_TEGRA114,
+};
+
+static struct tegra_fuse_info tegra124_info = {
+ .size = 0x300,
+ .speedo_idx = SPEEDO_TEGRA124,
+};
+
+static const struct of_device_id tegra30_fuse_of_match[] = {
+ { .compatible = "nvidia,tegra30-efuse", .data = &tegra30_info },
+ { .compatible = "nvidia,tegra114-efuse", .data = &tegra114_info },
+ { .compatible = "nvidia,tegra124-efuse", .data = &tegra124_info },
+ {},
+};
+
+static int tegra30_fuse_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_dev_id;
+
+ of_dev_id = of_match_device(tegra30_fuse_of_match, &pdev->dev);
+ if (!of_dev_id)
+ return -ENODEV;
+
+ fuse_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(fuse_clk)) {
+ dev_err(&pdev->dev, "missing clock");
+ return PTR_ERR(fuse_clk);
+ }
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (tegra_fuse_create_sysfs(&pdev->dev, fuse_info->size,
+ tegra30_fuse_readl))
+ return -ENODEV;
+
+ dev_dbg(&pdev->dev, "loaded\n");
+
+ return 0;
+}
+
+static struct platform_driver tegra30_fuse_driver = {
+ .probe = tegra30_fuse_probe,
+ .driver = {
+ .name = "tegra_fuse",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra30_fuse_of_match,
+ }
+};
+
+static int __init tegra30_fuse_init(void)
+{
+ return platform_driver_register(&tegra30_fuse_driver);
+}
+postcore_initcall(tegra30_fuse_init);
+
+/* Early boot code. This code is called before the devices are created */
+
+typedef void (*speedo_f)(struct tegra_sku_info *sku_info);
+
+static speedo_f __initdata speedo_tbl[] = {
+ [SPEEDO_TEGRA30] = tegra30_init_speedo_data,
+ [SPEEDO_TEGRA114] = tegra114_init_speedo_data,
+ [SPEEDO_TEGRA124] = tegra124_init_speedo_data,
+};
+
+static void __init tegra30_fuse_add_randomness(void)
+{
+ u32 randomness[12];
+
+ randomness[0] = tegra_sku_info.sku_id;
+ randomness[1] = tegra_read_straps();
+ randomness[2] = tegra_read_chipid();
+ randomness[3] = tegra_sku_info.cpu_process_id << 16;
+ randomness[3] |= tegra_sku_info.core_process_id;
+ randomness[4] = tegra_sku_info.cpu_speedo_id << 16;
+ randomness[4] |= tegra_sku_info.soc_speedo_id;
+ randomness[5] = tegra30_fuse_readl(FUSE_VENDOR_CODE);
+ randomness[6] = tegra30_fuse_readl(FUSE_FAB_CODE);
+ randomness[7] = tegra30_fuse_readl(FUSE_LOT_CODE_0);
+ randomness[8] = tegra30_fuse_readl(FUSE_LOT_CODE_1);
+ randomness[9] = tegra30_fuse_readl(FUSE_WAFER_ID);
+ randomness[10] = tegra30_fuse_readl(FUSE_X_COORDINATE);
+ randomness[11] = tegra30_fuse_readl(FUSE_Y_COORDINATE);
+
+ add_device_randomness(randomness, sizeof(randomness));
+}
+
+static void __init legacy_fuse_init(void)
+{
+ switch (tegra_get_chip_id()) {
+ case TEGRA30:
+ fuse_info = &tegra30_info;
+ break;
+ case TEGRA114:
+ fuse_info = &tegra114_info;
+ break;
+ case TEGRA124:
+ fuse_info = &tegra124_info;
+ break;
+ default:
+ return;
+ }
+
+ fuse_base = ioremap(TEGRA_FUSE_BASE, TEGRA_FUSE_SIZE);
+}
+
+bool __init tegra30_spare_fuse(int spare_bit)
+{
+ u32 offset = fuse_info->spare_bit + spare_bit * 4;
+
+ return tegra30_fuse_readl(offset) & 1;
+}
+
+void __init tegra30_init_fuse_early(void)
+{
+ struct device_node *np;
+ const struct of_device_id *of_match;
+
+ np = of_find_matching_node_and_match(NULL, tegra30_fuse_of_match,
+ &of_match);
+ if (np) {
+ fuse_base = of_iomap(np, 0);
+ fuse_info = (struct tegra_fuse_info *)of_match->data;
+ } else
+ legacy_fuse_init();
+
+ if (!fuse_base) {
+ pr_warn("fuse DT node missing and unknown chip id: 0x%02x\n",
+ tegra_get_chip_id());
+ return;
+ }
+
+ tegra_init_revision();
+ speedo_tbl[fuse_info->speedo_idx](&tegra_sku_info);
+ tegra30_fuse_add_randomness();
+}
diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h
new file mode 100644
index 0000000..3a398bf3
--- /dev/null
+++ b/drivers/soc/tegra/fuse/fuse.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_MISC_TEGRA_FUSE_H
+#define __DRIVERS_MISC_TEGRA_FUSE_H
+
+#define TEGRA_FUSE_BASE 0x7000f800
+#define TEGRA_FUSE_SIZE 0x400
+
+int tegra_fuse_create_sysfs(struct device *dev, int size,
+ u32 (*readl)(const unsigned int offset));
+
+bool tegra30_spare_fuse(int bit);
+u32 tegra30_fuse_readl(const unsigned int offset);
+void tegra30_init_fuse_early(void);
+void tegra_init_revision(void);
+void tegra_init_apbmisc(void);
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+void tegra20_init_speedo_data(struct tegra_sku_info *sku_info);
+bool tegra20_spare_fuse_early(int spare_bit);
+void tegra20_init_fuse_early(void);
+u32 tegra20_fuse_early(const unsigned int offset);
+#else
+static inline void tegra20_init_speedo_data(struct tegra_sku_info *sku_info) {}
+static inline bool tegra20_spare_fuse_early(int spare_bit)
+{
+ return false;
+}
+static inline void tegra20_init_fuse_early(void) {}
+static inline u32 tegra20_fuse_early(const unsigned int offset)
+{
+ return 0;
+}
+#endif
+
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+void tegra30_init_speedo_data(struct tegra_sku_info *sku_info);
+#else
+static inline void tegra30_init_speedo_data(struct tegra_sku_info *sku_info) {}
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+void tegra114_init_speedo_data(struct tegra_sku_info *sku_info);
+#else
+static inline void tegra114_init_speedo_data(struct tegra_sku_info *sku_info) {}
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+void tegra124_init_speedo_data(struct tegra_sku_info *sku_info);
+#else
+static inline void tegra124_init_speedo_data(struct tegra_sku_info *sku_info) {}
+#endif
+
+#endif
diff --git a/drivers/soc/tegra/fuse/speedo-tegra114.c b/drivers/soc/tegra/fuse/speedo-tegra114.c
new file mode 100644
index 0000000..2a6ca03
--- /dev/null
+++ b/drivers/soc/tegra/fuse/speedo-tegra114.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "fuse.h"
+
+#define CORE_PROCESS_CORNERS 2
+#define CPU_PROCESS_CORNERS 2
+
+enum {
+ THRESHOLD_INDEX_0,
+ THRESHOLD_INDEX_1,
+ THRESHOLD_INDEX_COUNT,
+};
+
+static const u32 __initconst core_process_speedos[][CORE_PROCESS_CORNERS] = {
+ {1123, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static const u32 __initconst cpu_process_speedos[][CPU_PROCESS_CORNERS] = {
+ {1695, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static void __init rev_sku_to_speedo_ids(struct tegra_sku_info *sku_info,
+ int *threshold)
+{
+ u32 tmp;
+ u32 sku = sku_info->sku_id;
+ enum tegra_revision rev = sku_info->revision;
+
+ switch (sku) {
+ case 0x00:
+ case 0x10:
+ case 0x05:
+ case 0x06:
+ sku_info->cpu_speedo_id = 1;
+ sku_info->soc_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+ break;
+
+ case 0x03:
+ case 0x04:
+ sku_info->cpu_speedo_id = 2;
+ sku_info->soc_speedo_id = 1;
+ *threshold = THRESHOLD_INDEX_1;
+ break;
+
+ default:
+ pr_err("Tegra Unknown SKU %d\n", sku);
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+ break;
+ }
+
+ if (rev == TEGRA_REVISION_A01) {
+ tmp = tegra30_fuse_readl(0x270) << 1;
+ tmp |= tegra30_fuse_readl(0x26c);
+ if (!tmp)
+ sku_info->cpu_speedo_id = 0;
+ }
+}
+
+void __init tegra114_init_speedo_data(struct tegra_sku_info *sku_info)
+{
+ u32 cpu_speedo_val;
+ u32 core_speedo_val;
+ int threshold;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+
+ rev_sku_to_speedo_ids(sku_info, &threshold);
+
+ cpu_speedo_val = tegra30_fuse_readl(0x12c) + 1024;
+ core_speedo_val = tegra30_fuse_readl(0x134);
+
+ for (i = 0; i < CPU_PROCESS_CORNERS; i++)
+ if (cpu_speedo_val < cpu_process_speedos[threshold][i])
+ break;
+ sku_info->cpu_process_id = i;
+
+ for (i = 0; i < CORE_PROCESS_CORNERS; i++)
+ if (core_speedo_val < core_process_speedos[threshold][i])
+ break;
+ sku_info->core_process_id = i;
+}
diff --git a/drivers/soc/tegra/fuse/speedo-tegra124.c b/drivers/soc/tegra/fuse/speedo-tegra124.c
new file mode 100644
index 0000000..4636238
--- /dev/null
+++ b/drivers/soc/tegra/fuse/speedo-tegra124.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2013-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "fuse.h"
+
+#define CPU_PROCESS_CORNERS 2
+#define GPU_PROCESS_CORNERS 2
+#define CORE_PROCESS_CORNERS 2
+
+#define FUSE_CPU_SPEEDO_0 0x14
+#define FUSE_CPU_SPEEDO_1 0x2c
+#define FUSE_CPU_SPEEDO_2 0x30
+#define FUSE_SOC_SPEEDO_0 0x34
+#define FUSE_SOC_SPEEDO_1 0x38
+#define FUSE_SOC_SPEEDO_2 0x3c
+#define FUSE_CPU_IDDQ 0x18
+#define FUSE_SOC_IDDQ 0x40
+#define FUSE_GPU_IDDQ 0x128
+#define FUSE_FT_REV 0x28
+
+enum {
+ THRESHOLD_INDEX_0,
+ THRESHOLD_INDEX_1,
+ THRESHOLD_INDEX_COUNT,
+};
+
+static const u32 __initconst cpu_process_speedos[][CPU_PROCESS_CORNERS] = {
+ {2190, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static const u32 __initconst gpu_process_speedos[][GPU_PROCESS_CORNERS] = {
+ {1965, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static const u32 __initconst core_process_speedos[][CORE_PROCESS_CORNERS] = {
+ {2101, UINT_MAX},
+ {0, UINT_MAX},
+};
+
+static void __init rev_sku_to_speedo_ids(struct tegra_sku_info *sku_info,
+ int *threshold)
+{
+ int sku = sku_info->sku_id;
+
+ /* Assign to default */
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ sku_info->gpu_speedo_id = 0;
+ *threshold = THRESHOLD_INDEX_0;
+
+ switch (sku) {
+ case 0x00: /* Eng sku */
+ case 0x0F:
+ case 0x23:
+ /* Using the default */
+ break;
+ case 0x83:
+ sku_info->cpu_speedo_id = 2;
+ break;
+
+ case 0x1F:
+ case 0x87:
+ case 0x27:
+ sku_info->cpu_speedo_id = 2;
+ sku_info->soc_speedo_id = 0;
+ sku_info->gpu_speedo_id = 1;
+ *threshold = THRESHOLD_INDEX_0;
+ break;
+ case 0x81:
+ case 0x21:
+ case 0x07:
+ sku_info->cpu_speedo_id = 1;
+ sku_info->soc_speedo_id = 1;
+ sku_info->gpu_speedo_id = 1;
+ *threshold = THRESHOLD_INDEX_1;
+ break;
+ case 0x49:
+ case 0x4A:
+ case 0x48:
+ sku_info->cpu_speedo_id = 4;
+ sku_info->soc_speedo_id = 2;
+ sku_info->gpu_speedo_id = 3;
+ *threshold = THRESHOLD_INDEX_1;
+ break;
+ default:
+ pr_err("Tegra Unknown SKU %d\n", sku);
+ /* Using the default for the error case */
+ break;
+ }
+}
+
+void __init tegra124_init_speedo_data(struct tegra_sku_info *sku_info)
+{
+ int i, threshold, cpu_speedo_0_value, soc_speedo_0_value;
+ int cpu_iddq_value, gpu_iddq_value, soc_iddq_value;
+
+ BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(gpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+
+ cpu_speedo_0_value = tegra30_fuse_readl(FUSE_CPU_SPEEDO_0);
+
+ /* GPU Speedo is stored in CPU_SPEEDO_2 */
+ sku_info->gpu_speedo_value = tegra30_fuse_readl(FUSE_CPU_SPEEDO_2);
+
+ soc_speedo_0_value = tegra30_fuse_readl(FUSE_SOC_SPEEDO_0);
+
+ cpu_iddq_value = tegra30_fuse_readl(FUSE_CPU_IDDQ);
+ soc_iddq_value = tegra30_fuse_readl(FUSE_SOC_IDDQ);
+ gpu_iddq_value = tegra30_fuse_readl(FUSE_GPU_IDDQ);
+
+ sku_info->cpu_speedo_value = cpu_speedo_0_value;
+
+ if (sku_info->cpu_speedo_value == 0) {
+ pr_warn("Tegra Warning: Speedo value not fused.\n");
+ WARN_ON(1);
+ return;
+ }
+
+ rev_sku_to_speedo_ids(sku_info, &threshold);
+
+ sku_info->cpu_iddq_value = tegra30_fuse_readl(FUSE_CPU_IDDQ);
+
+ for (i = 0; i < GPU_PROCESS_CORNERS; i++)
+ if (sku_info->gpu_speedo_value <
+ gpu_process_speedos[threshold][i])
+ break;
+ sku_info->gpu_process_id = i;
+
+ for (i = 0; i < CPU_PROCESS_CORNERS; i++)
+ if (sku_info->cpu_speedo_value <
+ cpu_process_speedos[threshold][i])
+ break;
+ sku_info->cpu_process_id = i;
+
+ for (i = 0; i < CORE_PROCESS_CORNERS; i++)
+ if (soc_speedo_0_value <
+ core_process_speedos[threshold][i])
+ break;
+ sku_info->core_process_id = i;
+
+ pr_debug("Tegra GPU Speedo ID=%d, Speedo Value=%d\n",
+ sku_info->gpu_speedo_id, sku_info->gpu_speedo_value);
+}
diff --git a/arch/arm/mach-tegra/tegra20_speedo.c b/drivers/soc/tegra/fuse/speedo-tegra20.c
similarity index 66%
rename from arch/arm/mach-tegra/tegra20_speedo.c
rename to drivers/soc/tegra/fuse/speedo-tegra20.c
index fa6eb57..eff1b63 100644
--- a/arch/arm/mach-tegra/tegra20_speedo.c
+++ b/drivers/soc/tegra/fuse/speedo-tegra20.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2012-2014, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -14,8 +14,11 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/kernel.h>
#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+
+#include <soc/tegra/fuse.h>
#include "fuse.h"
@@ -47,19 +50,19 @@
SPEEDO_ID_COUNT,
};
-static const u32 cpu_process_speedos[][PROCESS_CORNERS_NUM] = {
+static const u32 __initconst cpu_process_speedos[][PROCESS_CORNERS_NUM] = {
{315, 366, 420, UINT_MAX},
{303, 368, 419, UINT_MAX},
{316, 331, 383, UINT_MAX},
};
-static const u32 core_process_speedos[][PROCESS_CORNERS_NUM] = {
+static const u32 __initconst core_process_speedos[][PROCESS_CORNERS_NUM] = {
{165, 195, 224, UINT_MAX},
{165, 195, 224, UINT_MAX},
{165, 195, 224, UINT_MAX},
};
-void tegra20_init_speedo_data(void)
+void __init tegra20_init_speedo_data(struct tegra_sku_info *sku_info)
{
u32 reg;
u32 val;
@@ -68,42 +71,40 @@
BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != SPEEDO_ID_COUNT);
BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != SPEEDO_ID_COUNT);
- if (SPEEDO_ID_SELECT_0(tegra_revision))
- tegra_soc_speedo_id = SPEEDO_ID_0;
- else if (SPEEDO_ID_SELECT_1(tegra_sku_id))
- tegra_soc_speedo_id = SPEEDO_ID_1;
+ if (SPEEDO_ID_SELECT_0(sku_info->revision))
+ sku_info->soc_speedo_id = SPEEDO_ID_0;
+ else if (SPEEDO_ID_SELECT_1(sku_info->sku_id))
+ sku_info->soc_speedo_id = SPEEDO_ID_1;
else
- tegra_soc_speedo_id = SPEEDO_ID_2;
+ sku_info->soc_speedo_id = SPEEDO_ID_2;
val = 0;
for (i = CPU_SPEEDO_MSBIT; i >= CPU_SPEEDO_LSBIT; i--) {
- reg = tegra_spare_fuse(i) |
- tegra_spare_fuse(i + CPU_SPEEDO_REDUND_OFFS);
+ reg = tegra20_spare_fuse_early(i) |
+ tegra20_spare_fuse_early(i + CPU_SPEEDO_REDUND_OFFS);
val = (val << 1) | (reg & 0x1);
}
val = val * SPEEDO_MULT;
- pr_debug("%s CPU speedo value %u\n", __func__, val);
+ pr_debug("Tegra CPU speedo value %u\n", val);
for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) {
- if (val <= cpu_process_speedos[tegra_soc_speedo_id][i])
+ if (val <= cpu_process_speedos[sku_info->soc_speedo_id][i])
break;
}
- tegra_cpu_process_id = i;
+ sku_info->cpu_process_id = i;
val = 0;
for (i = CORE_SPEEDO_MSBIT; i >= CORE_SPEEDO_LSBIT; i--) {
- reg = tegra_spare_fuse(i) |
- tegra_spare_fuse(i + CORE_SPEEDO_REDUND_OFFS);
+ reg = tegra20_spare_fuse_early(i) |
+ tegra20_spare_fuse_early(i + CORE_SPEEDO_REDUND_OFFS);
val = (val << 1) | (reg & 0x1);
}
val = val * SPEEDO_MULT;
- pr_debug("%s Core speedo value %u\n", __func__, val);
+ pr_debug("Core speedo value %u\n", val);
for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) {
- if (val <= core_process_speedos[tegra_soc_speedo_id][i])
+ if (val <= core_process_speedos[sku_info->soc_speedo_id][i])
break;
}
- tegra_core_process_id = i;
-
- pr_info("Tegra20 Soc Speedo ID %d", tegra_soc_speedo_id);
+ sku_info->core_process_id = i;
}
diff --git a/drivers/soc/tegra/fuse/speedo-tegra30.c b/drivers/soc/tegra/fuse/speedo-tegra30.c
new file mode 100644
index 0000000..b17f0dc
--- /dev/null
+++ b/drivers/soc/tegra/fuse/speedo-tegra30.c
@@ -0,0 +1,288 @@
+/*
+ * Copyright (c) 2012-2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "fuse.h"
+
+#define CORE_PROCESS_CORNERS 1
+#define CPU_PROCESS_CORNERS 6
+
+#define FUSE_SPEEDO_CALIB_0 0x14
+#define FUSE_PACKAGE_INFO 0XFC
+#define FUSE_TEST_PROG_VER 0X28
+
+#define G_SPEEDO_BIT_MINUS1 58
+#define G_SPEEDO_BIT_MINUS1_R 59
+#define G_SPEEDO_BIT_MINUS2 60
+#define G_SPEEDO_BIT_MINUS2_R 61
+#define LP_SPEEDO_BIT_MINUS1 62
+#define LP_SPEEDO_BIT_MINUS1_R 63
+#define LP_SPEEDO_BIT_MINUS2 64
+#define LP_SPEEDO_BIT_MINUS2_R 65
+
+enum {
+ THRESHOLD_INDEX_0,
+ THRESHOLD_INDEX_1,
+ THRESHOLD_INDEX_2,
+ THRESHOLD_INDEX_3,
+ THRESHOLD_INDEX_4,
+ THRESHOLD_INDEX_5,
+ THRESHOLD_INDEX_6,
+ THRESHOLD_INDEX_7,
+ THRESHOLD_INDEX_8,
+ THRESHOLD_INDEX_9,
+ THRESHOLD_INDEX_10,
+ THRESHOLD_INDEX_11,
+ THRESHOLD_INDEX_COUNT,
+};
+
+static const u32 __initconst core_process_speedos[][CORE_PROCESS_CORNERS] = {
+ {180},
+ {170},
+ {195},
+ {180},
+ {168},
+ {192},
+ {180},
+ {170},
+ {195},
+ {180},
+ {180},
+ {180},
+};
+
+static const u32 __initconst cpu_process_speedos[][CPU_PROCESS_CORNERS] = {
+ {306, 338, 360, 376, UINT_MAX},
+ {295, 336, 358, 375, UINT_MAX},
+ {325, 325, 358, 375, UINT_MAX},
+ {325, 325, 358, 375, UINT_MAX},
+ {292, 324, 348, 364, UINT_MAX},
+ {324, 324, 348, 364, UINT_MAX},
+ {324, 324, 348, 364, UINT_MAX},
+ {295, 336, 358, 375, UINT_MAX},
+ {358, 358, 358, 358, 397, UINT_MAX},
+ {364, 364, 364, 364, 397, UINT_MAX},
+ {295, 336, 358, 375, 391, UINT_MAX},
+ {295, 336, 358, 375, 391, UINT_MAX},
+};
+
+static int threshold_index __initdata;
+
+static void __init fuse_speedo_calib(u32 *speedo_g, u32 *speedo_lp)
+{
+ u32 reg;
+ int ate_ver;
+ int bit_minus1;
+ int bit_minus2;
+
+ reg = tegra30_fuse_readl(FUSE_SPEEDO_CALIB_0);
+
+ *speedo_lp = (reg & 0xFFFF) * 4;
+ *speedo_g = ((reg >> 16) & 0xFFFF) * 4;
+
+ ate_ver = tegra30_fuse_readl(FUSE_TEST_PROG_VER);
+ pr_debug("Tegra ATE prog ver %d.%d\n", ate_ver/10, ate_ver%10);
+
+ if (ate_ver >= 26) {
+ bit_minus1 = tegra30_spare_fuse(LP_SPEEDO_BIT_MINUS1);
+ bit_minus1 |= tegra30_spare_fuse(LP_SPEEDO_BIT_MINUS1_R);
+ bit_minus2 = tegra30_spare_fuse(LP_SPEEDO_BIT_MINUS2);
+ bit_minus2 |= tegra30_spare_fuse(LP_SPEEDO_BIT_MINUS2_R);
+ *speedo_lp |= (bit_minus1 << 1) | bit_minus2;
+
+ bit_minus1 = tegra30_spare_fuse(G_SPEEDO_BIT_MINUS1);
+ bit_minus1 |= tegra30_spare_fuse(G_SPEEDO_BIT_MINUS1_R);
+ bit_minus2 = tegra30_spare_fuse(G_SPEEDO_BIT_MINUS2);
+ bit_minus2 |= tegra30_spare_fuse(G_SPEEDO_BIT_MINUS2_R);
+ *speedo_g |= (bit_minus1 << 1) | bit_minus2;
+ } else {
+ *speedo_lp |= 0x3;
+ *speedo_g |= 0x3;
+ }
+}
+
+static void __init rev_sku_to_speedo_ids(struct tegra_sku_info *sku_info)
+{
+ int package_id = tegra30_fuse_readl(FUSE_PACKAGE_INFO) & 0x0F;
+
+ switch (sku_info->revision) {
+ case TEGRA_REVISION_A01:
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ threshold_index = THRESHOLD_INDEX_0;
+ break;
+ case TEGRA_REVISION_A02:
+ case TEGRA_REVISION_A03:
+ switch (sku_info->sku_id) {
+ case 0x87:
+ case 0x82:
+ sku_info->cpu_speedo_id = 1;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_1;
+ break;
+ case 0x81:
+ switch (package_id) {
+ case 1:
+ sku_info->cpu_speedo_id = 2;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_2;
+ break;
+ case 2:
+ sku_info->cpu_speedo_id = 4;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_7;
+ break;
+ default:
+ pr_err("Tegra Unknown pkg %d\n", package_id);
+ break;
+ }
+ break;
+ case 0x80:
+ switch (package_id) {
+ case 1:
+ sku_info->cpu_speedo_id = 5;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_8;
+ break;
+ case 2:
+ sku_info->cpu_speedo_id = 6;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_9;
+ break;
+ default:
+ pr_err("Tegra Unknown pkg %d\n", package_id);
+ break;
+ }
+ break;
+ case 0x83:
+ switch (package_id) {
+ case 1:
+ sku_info->cpu_speedo_id = 7;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_10;
+ break;
+ case 2:
+ sku_info->cpu_speedo_id = 3;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_3;
+ break;
+ default:
+ pr_err("Tegra Unknown pkg %d\n", package_id);
+ break;
+ }
+ break;
+ case 0x8F:
+ sku_info->cpu_speedo_id = 8;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_11;
+ break;
+ case 0x08:
+ sku_info->cpu_speedo_id = 1;
+ sku_info->soc_speedo_id = 1;
+ threshold_index = THRESHOLD_INDEX_4;
+ break;
+ case 0x02:
+ sku_info->cpu_speedo_id = 2;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_5;
+ break;
+ case 0x04:
+ sku_info->cpu_speedo_id = 3;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_6;
+ break;
+ case 0:
+ switch (package_id) {
+ case 1:
+ sku_info->cpu_speedo_id = 2;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_2;
+ break;
+ case 2:
+ sku_info->cpu_speedo_id = 3;
+ sku_info->soc_speedo_id = 2;
+ threshold_index = THRESHOLD_INDEX_3;
+ break;
+ default:
+ pr_err("Tegra Unknown pkg %d\n", package_id);
+ break;
+ }
+ break;
+ default:
+ pr_warn("Tegra Unknown SKU %d\n", sku_info->sku_id);
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ threshold_index = THRESHOLD_INDEX_0;
+ break;
+ }
+ break;
+ default:
+ pr_warn("Tegra Unknown chip rev %d\n", sku_info->revision);
+ sku_info->cpu_speedo_id = 0;
+ sku_info->soc_speedo_id = 0;
+ threshold_index = THRESHOLD_INDEX_0;
+ break;
+ }
+}
+
+void __init tegra30_init_speedo_data(struct tegra_sku_info *sku_info)
+{
+ u32 cpu_speedo_val;
+ u32 core_speedo_val;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+ BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) !=
+ THRESHOLD_INDEX_COUNT);
+
+
+ rev_sku_to_speedo_ids(sku_info);
+ fuse_speedo_calib(&cpu_speedo_val, &core_speedo_val);
+ pr_debug("Tegra CPU speedo value %u\n", cpu_speedo_val);
+ pr_debug("Tegra Core speedo value %u\n", core_speedo_val);
+
+ for (i = 0; i < CPU_PROCESS_CORNERS; i++) {
+ if (cpu_speedo_val < cpu_process_speedos[threshold_index][i])
+ break;
+ }
+ sku_info->cpu_process_id = i - 1;
+
+ if (sku_info->cpu_process_id == -1) {
+ pr_warn("Tegra CPU speedo value %3d out of range",
+ cpu_speedo_val);
+ sku_info->cpu_process_id = 0;
+ sku_info->cpu_speedo_id = 1;
+ }
+
+ for (i = 0; i < CORE_PROCESS_CORNERS; i++) {
+ if (core_speedo_val < core_process_speedos[threshold_index][i])
+ break;
+ }
+ sku_info->core_process_id = i - 1;
+
+ if (sku_info->core_process_id == -1) {
+ pr_warn("Tegra CORE speedo value %3d out of range",
+ core_speedo_val);
+ sku_info->core_process_id = 0;
+ sku_info->soc_speedo_id = 1;
+ }
+}
diff --git a/drivers/soc/tegra/fuse/tegra-apbmisc.c b/drivers/soc/tegra/fuse/tegra-apbmisc.c
new file mode 100644
index 0000000..bfc1d54
--- /dev/null
+++ b/drivers/soc/tegra/fuse/tegra-apbmisc.c
@@ -0,0 +1,112 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "fuse.h"
+
+#define APBMISC_BASE 0x70000800
+#define APBMISC_SIZE 0x64
+#define FUSE_SKU_INFO 0x10
+
+static void __iomem *apbmisc_base;
+static void __iomem *strapping_base;
+
+u32 tegra_read_chipid(void)
+{
+ return readl_relaxed(apbmisc_base + 4);
+}
+
+u8 tegra_get_chip_id(void)
+{
+ u32 id = tegra_read_chipid();
+
+ return (id >> 8) & 0xff;
+}
+
+u32 tegra_read_straps(void)
+{
+ if (strapping_base)
+ return readl_relaxed(strapping_base);
+ else
+ return 0;
+}
+
+static const struct of_device_id apbmisc_match[] __initconst = {
+ { .compatible = "nvidia,tegra20-apbmisc", },
+ {},
+};
+
+void __init tegra_init_revision(void)
+{
+ u32 id, chip_id, minor_rev;
+ int rev;
+
+ id = tegra_read_chipid();
+ chip_id = (id >> 8) & 0xff;
+ minor_rev = (id >> 16) & 0xf;
+
+ switch (minor_rev) {
+ case 1:
+ rev = TEGRA_REVISION_A01;
+ break;
+ case 2:
+ rev = TEGRA_REVISION_A02;
+ break;
+ case 3:
+ if (chip_id == TEGRA20 && (tegra20_spare_fuse_early(18) ||
+ tegra20_spare_fuse_early(19)))
+ rev = TEGRA_REVISION_A03p;
+ else
+ rev = TEGRA_REVISION_A03;
+ break;
+ case 4:
+ rev = TEGRA_REVISION_A04;
+ break;
+ default:
+ rev = TEGRA_REVISION_UNKNOWN;
+ }
+
+ tegra_sku_info.revision = rev;
+
+ if (chip_id == TEGRA20)
+ tegra_sku_info.sku_id = tegra20_fuse_early(FUSE_SKU_INFO);
+ else
+ tegra_sku_info.sku_id = tegra30_fuse_readl(FUSE_SKU_INFO);
+}
+
+void __init tegra_init_apbmisc(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, apbmisc_match);
+ apbmisc_base = of_iomap(np, 0);
+ if (!apbmisc_base) {
+ pr_warn("ioremap tegra apbmisc failed. using %08x instead\n",
+ APBMISC_BASE);
+ apbmisc_base = ioremap(APBMISC_BASE, APBMISC_SIZE);
+ }
+
+ strapping_base = of_iomap(np, 1);
+ if (!strapping_base)
+ pr_err("ioremap tegra strapping_base failed\n");
+}
diff --git a/include/dt-bindings/clock/imx1-clock.h b/include/dt-bindings/clock/imx1-clock.h
new file mode 100644
index 0000000..607bf01
--- /dev/null
+++ b/include/dt-bindings/clock/imx1-clock.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX1_H
+#define __DT_BINDINGS_CLOCK_IMX1_H
+
+#define IMX1_CLK_DUMMY 0
+#define IMX1_CLK_CLK32 1
+#define IMX1_CLK_CLK16M_EXT 2
+#define IMX1_CLK_CLK16M 3
+#define IMX1_CLK_CLK32_PREMULT 4
+#define IMX1_CLK_PREM 5
+#define IMX1_CLK_MPLL 6
+#define IMX1_CLK_MPLL_GATE 7
+#define IMX1_CLK_SPLL 8
+#define IMX1_CLK_SPLL_GATE 9
+#define IMX1_CLK_MCU 10
+#define IMX1_CLK_FCLK 11
+#define IMX1_CLK_HCLK 12
+#define IMX1_CLK_CLK48M 13
+#define IMX1_CLK_PER1 14
+#define IMX1_CLK_PER2 15
+#define IMX1_CLK_PER3 16
+#define IMX1_CLK_CLKO 17
+#define IMX1_CLK_UART3_GATE 18
+#define IMX1_CLK_SSI2_GATE 19
+#define IMX1_CLK_BROM_GATE 20
+#define IMX1_CLK_DMA_GATE 21
+#define IMX1_CLK_CSI_GATE 22
+#define IMX1_CLK_MMA_GATE 23
+#define IMX1_CLK_USBD_GATE 24
+#define IMX1_CLK_MAX 25
+
+#endif
diff --git a/include/dt-bindings/clock/imx21-clock.h b/include/dt-bindings/clock/imx21-clock.h
new file mode 100644
index 0000000..b13596c
--- /dev/null
+++ b/include/dt-bindings/clock/imx21-clock.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX21_H
+#define __DT_BINDINGS_CLOCK_IMX21_H
+
+#define IMX21_CLK_DUMMY 0
+#define IMX21_CLK_CKIL 1
+#define IMX21_CLK_CKIH 2
+#define IMX21_CLK_FPM 3
+#define IMX21_CLK_CKIH_DIV1P5 4
+#define IMX21_CLK_MPLL_GATE 5
+#define IMX21_CLK_SPLL_GATE 6
+#define IMX21_CLK_FPM_GATE 7
+#define IMX21_CLK_CKIH_GATE 8
+#define IMX21_CLK_MPLL_OSC_SEL 9
+#define IMX21_CLK_IPG 10
+#define IMX21_CLK_HCLK 11
+#define IMX21_CLK_MPLL_SEL 12
+#define IMX21_CLK_SPLL_SEL 13
+#define IMX21_CLK_SSI1_SEL 14
+#define IMX21_CLK_SSI2_SEL 15
+#define IMX21_CLK_USB_DIV 16
+#define IMX21_CLK_FCLK 17
+#define IMX21_CLK_MPLL 18
+#define IMX21_CLK_SPLL 19
+#define IMX21_CLK_NFC_DIV 20
+#define IMX21_CLK_SSI1_DIV 21
+#define IMX21_CLK_SSI2_DIV 22
+#define IMX21_CLK_PER1 23
+#define IMX21_CLK_PER2 24
+#define IMX21_CLK_PER3 25
+#define IMX21_CLK_PER4 26
+#define IMX21_CLK_UART1_IPG_GATE 27
+#define IMX21_CLK_UART2_IPG_GATE 28
+#define IMX21_CLK_UART3_IPG_GATE 29
+#define IMX21_CLK_UART4_IPG_GATE 30
+#define IMX21_CLK_CSPI1_IPG_GATE 31
+#define IMX21_CLK_CSPI2_IPG_GATE 32
+#define IMX21_CLK_SSI1_GATE 33
+#define IMX21_CLK_SSI2_GATE 34
+#define IMX21_CLK_SDHC1_IPG_GATE 35
+#define IMX21_CLK_SDHC2_IPG_GATE 36
+#define IMX21_CLK_GPIO_GATE 37
+#define IMX21_CLK_I2C_GATE 38
+#define IMX21_CLK_DMA_GATE 39
+#define IMX21_CLK_USB_GATE 40
+#define IMX21_CLK_EMMA_GATE 41
+#define IMX21_CLK_SSI2_BAUD_GATE 42
+#define IMX21_CLK_SSI1_BAUD_GATE 43
+#define IMX21_CLK_LCDC_IPG_GATE 44
+#define IMX21_CLK_NFC_GATE 45
+#define IMX21_CLK_LCDC_HCLK_GATE 46
+#define IMX21_CLK_PER4_GATE 47
+#define IMX21_CLK_BMI_GATE 48
+#define IMX21_CLK_USB_HCLK_GATE 49
+#define IMX21_CLK_SLCDC_GATE 50
+#define IMX21_CLK_SLCDC_HCLK_GATE 51
+#define IMX21_CLK_EMMA_HCLK_GATE 52
+#define IMX21_CLK_BROM_GATE 53
+#define IMX21_CLK_DMA_HCLK_GATE 54
+#define IMX21_CLK_CSI_HCLK_GATE 55
+#define IMX21_CLK_CSPI3_IPG_GATE 56
+#define IMX21_CLK_WDOG_GATE 57
+#define IMX21_CLK_GPT1_IPG_GATE 58
+#define IMX21_CLK_GPT2_IPG_GATE 59
+#define IMX21_CLK_GPT3_IPG_GATE 60
+#define IMX21_CLK_PWM_IPG_GATE 61
+#define IMX21_CLK_RTC_GATE 62
+#define IMX21_CLK_KPP_GATE 63
+#define IMX21_CLK_OWIRE_GATE 64
+#define IMX21_CLK_MAX 65
+
+#endif
diff --git a/include/dt-bindings/clock/imx27-clock.h b/include/dt-bindings/clock/imx27-clock.h
new file mode 100644
index 0000000..148b053
--- /dev/null
+++ b/include/dt-bindings/clock/imx27-clock.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX27_H
+#define __DT_BINDINGS_CLOCK_IMX27_H
+
+#define IMX27_CLK_DUMMY 0
+#define IMX27_CLK_CKIH 1
+#define IMX27_CLK_CKIL 2
+#define IMX27_CLK_MPLL 3
+#define IMX27_CLK_SPLL 4
+#define IMX27_CLK_MPLL_MAIN2 5
+#define IMX27_CLK_AHB 6
+#define IMX27_CLK_IPG 7
+#define IMX27_CLK_NFC_DIV 8
+#define IMX27_CLK_PER1_DIV 9
+#define IMX27_CLK_PER2_DIV 10
+#define IMX27_CLK_PER3_DIV 11
+#define IMX27_CLK_PER4_DIV 12
+#define IMX27_CLK_VPU_SEL 13
+#define IMX27_CLK_VPU_DIV 14
+#define IMX27_CLK_USB_DIV 15
+#define IMX27_CLK_CPU_SEL 16
+#define IMX27_CLK_CLKO_SEL 17
+#define IMX27_CLK_CPU_DIV 18
+#define IMX27_CLK_CLKO_DIV 19
+#define IMX27_CLK_SSI1_SEL 20
+#define IMX27_CLK_SSI2_SEL 21
+#define IMX27_CLK_SSI1_DIV 22
+#define IMX27_CLK_SSI2_DIV 23
+#define IMX27_CLK_CLKO_EN 24
+#define IMX27_CLK_SSI2_IPG_GATE 25
+#define IMX27_CLK_SSI1_IPG_GATE 26
+#define IMX27_CLK_SLCDC_IPG_GATE 27
+#define IMX27_CLK_SDHC3_IPG_GATE 28
+#define IMX27_CLK_SDHC2_IPG_GATE 29
+#define IMX27_CLK_SDHC1_IPG_GATE 30
+#define IMX27_CLK_SCC_IPG_GATE 31
+#define IMX27_CLK_SAHARA_IPG_GATE 32
+#define IMX27_CLK_RTC_IPG_GATE 33
+#define IMX27_CLK_PWM_IPG_GATE 34
+#define IMX27_CLK_OWIRE_IPG_GATE 35
+#define IMX27_CLK_LCDC_IPG_GATE 36
+#define IMX27_CLK_KPP_IPG_GATE 37
+#define IMX27_CLK_IIM_IPG_GATE 38
+#define IMX27_CLK_I2C2_IPG_GATE 39
+#define IMX27_CLK_I2C1_IPG_GATE 40
+#define IMX27_CLK_GPT6_IPG_GATE 41
+#define IMX27_CLK_GPT5_IPG_GATE 42
+#define IMX27_CLK_GPT4_IPG_GATE 43
+#define IMX27_CLK_GPT3_IPG_GATE 44
+#define IMX27_CLK_GPT2_IPG_GATE 45
+#define IMX27_CLK_GPT1_IPG_GATE 46
+#define IMX27_CLK_GPIO_IPG_GATE 47
+#define IMX27_CLK_FEC_IPG_GATE 48
+#define IMX27_CLK_EMMA_IPG_GATE 49
+#define IMX27_CLK_DMA_IPG_GATE 50
+#define IMX27_CLK_CSPI3_IPG_GATE 51
+#define IMX27_CLK_CSPI2_IPG_GATE 52
+#define IMX27_CLK_CSPI1_IPG_GATE 53
+#define IMX27_CLK_NFC_BAUD_GATE 54
+#define IMX27_CLK_SSI2_BAUD_GATE 55
+#define IMX27_CLK_SSI1_BAUD_GATE 56
+#define IMX27_CLK_VPU_BAUD_GATE 57
+#define IMX27_CLK_PER4_GATE 58
+#define IMX27_CLK_PER3_GATE 59
+#define IMX27_CLK_PER2_GATE 60
+#define IMX27_CLK_PER1_GATE 61
+#define IMX27_CLK_USB_AHB_GATE 62
+#define IMX27_CLK_SLCDC_AHB_GATE 63
+#define IMX27_CLK_SAHARA_AHB_GATE 64
+#define IMX27_CLK_LCDC_AHB_GATE 65
+#define IMX27_CLK_VPU_AHB_GATE 66
+#define IMX27_CLK_FEC_AHB_GATE 67
+#define IMX27_CLK_EMMA_AHB_GATE 68
+#define IMX27_CLK_EMI_AHB_GATE 69
+#define IMX27_CLK_DMA_AHB_GATE 70
+#define IMX27_CLK_CSI_AHB_GATE 71
+#define IMX27_CLK_BROM_AHB_GATE 72
+#define IMX27_CLK_ATA_AHB_GATE 73
+#define IMX27_CLK_WDOG_IPG_GATE 74
+#define IMX27_CLK_USB_IPG_GATE 75
+#define IMX27_CLK_UART6_IPG_GATE 76
+#define IMX27_CLK_UART5_IPG_GATE 77
+#define IMX27_CLK_UART4_IPG_GATE 78
+#define IMX27_CLK_UART3_IPG_GATE 79
+#define IMX27_CLK_UART2_IPG_GATE 80
+#define IMX27_CLK_UART1_IPG_GATE 81
+#define IMX27_CLK_CKIH_DIV1P5 82
+#define IMX27_CLK_FPM 83
+#define IMX27_CLK_MPLL_OSC_SEL 84
+#define IMX27_CLK_MPLL_SEL 85
+#define IMX27_CLK_SPLL_GATE 86
+#define IMX27_CLK_MSHC_DIV 87
+#define IMX27_CLK_RTIC_IPG_GATE 88
+#define IMX27_CLK_MSHC_IPG_GATE 89
+#define IMX27_CLK_RTIC_AHB_GATE 90
+#define IMX27_CLK_MSHC_BAUD_GATE 91
+#define IMX27_CLK_CKIH_GATE 92
+#define IMX27_CLK_MAX 93
+
+#endif
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
new file mode 100644
index 0000000..654151e
--- /dev/null
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6QDL_H
+#define __DT_BINDINGS_CLOCK_IMX6QDL_H
+
+#define IMX6QDL_CLK_DUMMY 0
+#define IMX6QDL_CLK_CKIL 1
+#define IMX6QDL_CLK_CKIH 2
+#define IMX6QDL_CLK_OSC 3
+#define IMX6QDL_CLK_PLL2_PFD0_352M 4
+#define IMX6QDL_CLK_PLL2_PFD1_594M 5
+#define IMX6QDL_CLK_PLL2_PFD2_396M 6
+#define IMX6QDL_CLK_PLL3_PFD0_720M 7
+#define IMX6QDL_CLK_PLL3_PFD1_540M 8
+#define IMX6QDL_CLK_PLL3_PFD2_508M 9
+#define IMX6QDL_CLK_PLL3_PFD3_454M 10
+#define IMX6QDL_CLK_PLL2_198M 11
+#define IMX6QDL_CLK_PLL3_120M 12
+#define IMX6QDL_CLK_PLL3_80M 13
+#define IMX6QDL_CLK_PLL3_60M 14
+#define IMX6QDL_CLK_TWD 15
+#define IMX6QDL_CLK_STEP 16
+#define IMX6QDL_CLK_PLL1_SW 17
+#define IMX6QDL_CLK_PERIPH_PRE 18
+#define IMX6QDL_CLK_PERIPH2_PRE 19
+#define IMX6QDL_CLK_PERIPH_CLK2_SEL 20
+#define IMX6QDL_CLK_PERIPH2_CLK2_SEL 21
+#define IMX6QDL_CLK_AXI_SEL 22
+#define IMX6QDL_CLK_ESAI_SEL 23
+#define IMX6QDL_CLK_ASRC_SEL 24
+#define IMX6QDL_CLK_SPDIF_SEL 25
+#define IMX6QDL_CLK_GPU2D_AXI 26
+#define IMX6QDL_CLK_GPU3D_AXI 27
+#define IMX6QDL_CLK_GPU2D_CORE_SEL 28
+#define IMX6QDL_CLK_GPU3D_CORE_SEL 29
+#define IMX6QDL_CLK_GPU3D_SHADER_SEL 30
+#define IMX6QDL_CLK_IPU1_SEL 31
+#define IMX6QDL_CLK_IPU2_SEL 32
+#define IMX6QDL_CLK_LDB_DI0_SEL 33
+#define IMX6QDL_CLK_LDB_DI1_SEL 34
+#define IMX6QDL_CLK_IPU1_DI0_PRE_SEL 35
+#define IMX6QDL_CLK_IPU1_DI1_PRE_SEL 36
+#define IMX6QDL_CLK_IPU2_DI0_PRE_SEL 37
+#define IMX6QDL_CLK_IPU2_DI1_PRE_SEL 38
+#define IMX6QDL_CLK_IPU1_DI0_SEL 39
+#define IMX6QDL_CLK_IPU1_DI1_SEL 40
+#define IMX6QDL_CLK_IPU2_DI0_SEL 41
+#define IMX6QDL_CLK_IPU2_DI1_SEL 42
+#define IMX6QDL_CLK_HSI_TX_SEL 43
+#define IMX6QDL_CLK_PCIE_AXI_SEL 44
+#define IMX6QDL_CLK_SSI1_SEL 45
+#define IMX6QDL_CLK_SSI2_SEL 46
+#define IMX6QDL_CLK_SSI3_SEL 47
+#define IMX6QDL_CLK_USDHC1_SEL 48
+#define IMX6QDL_CLK_USDHC2_SEL 49
+#define IMX6QDL_CLK_USDHC3_SEL 50
+#define IMX6QDL_CLK_USDHC4_SEL 51
+#define IMX6QDL_CLK_ENFC_SEL 52
+#define IMX6QDL_CLK_EMI_SEL 53
+#define IMX6QDL_CLK_EMI_SLOW_SEL 54
+#define IMX6QDL_CLK_VDO_AXI_SEL 55
+#define IMX6QDL_CLK_VPU_AXI_SEL 56
+#define IMX6QDL_CLK_CKO1_SEL 57
+#define IMX6QDL_CLK_PERIPH 58
+#define IMX6QDL_CLK_PERIPH2 59
+#define IMX6QDL_CLK_PERIPH_CLK2 60
+#define IMX6QDL_CLK_PERIPH2_CLK2 61
+#define IMX6QDL_CLK_IPG 62
+#define IMX6QDL_CLK_IPG_PER 63
+#define IMX6QDL_CLK_ESAI_PRED 64
+#define IMX6QDL_CLK_ESAI_PODF 65
+#define IMX6QDL_CLK_ASRC_PRED 66
+#define IMX6QDL_CLK_ASRC_PODF 67
+#define IMX6QDL_CLK_SPDIF_PRED 68
+#define IMX6QDL_CLK_SPDIF_PODF 69
+#define IMX6QDL_CLK_CAN_ROOT 70
+#define IMX6QDL_CLK_ECSPI_ROOT 71
+#define IMX6QDL_CLK_GPU2D_CORE_PODF 72
+#define IMX6QDL_CLK_GPU3D_CORE_PODF 73
+#define IMX6QDL_CLK_GPU3D_SHADER 74
+#define IMX6QDL_CLK_IPU1_PODF 75
+#define IMX6QDL_CLK_IPU2_PODF 76
+#define IMX6QDL_CLK_LDB_DI0_PODF 77
+#define IMX6QDL_CLK_LDB_DI1_PODF 78
+#define IMX6QDL_CLK_IPU1_DI0_PRE 79
+#define IMX6QDL_CLK_IPU1_DI1_PRE 80
+#define IMX6QDL_CLK_IPU2_DI0_PRE 81
+#define IMX6QDL_CLK_IPU2_DI1_PRE 82
+#define IMX6QDL_CLK_HSI_TX_PODF 83
+#define IMX6QDL_CLK_SSI1_PRED 84
+#define IMX6QDL_CLK_SSI1_PODF 85
+#define IMX6QDL_CLK_SSI2_PRED 86
+#define IMX6QDL_CLK_SSI2_PODF 87
+#define IMX6QDL_CLK_SSI3_PRED 88
+#define IMX6QDL_CLK_SSI3_PODF 89
+#define IMX6QDL_CLK_UART_SERIAL_PODF 90
+#define IMX6QDL_CLK_USDHC1_PODF 91
+#define IMX6QDL_CLK_USDHC2_PODF 92
+#define IMX6QDL_CLK_USDHC3_PODF 93
+#define IMX6QDL_CLK_USDHC4_PODF 94
+#define IMX6QDL_CLK_ENFC_PRED 95
+#define IMX6QDL_CLK_ENFC_PODF 96
+#define IMX6QDL_CLK_EMI_PODF 97
+#define IMX6QDL_CLK_EMI_SLOW_PODF 98
+#define IMX6QDL_CLK_VPU_AXI_PODF 99
+#define IMX6QDL_CLK_CKO1_PODF 100
+#define IMX6QDL_CLK_AXI 101
+#define IMX6QDL_CLK_MMDC_CH0_AXI_PODF 102
+#define IMX6QDL_CLK_MMDC_CH1_AXI_PODF 103
+#define IMX6QDL_CLK_ARM 104
+#define IMX6QDL_CLK_AHB 105
+#define IMX6QDL_CLK_APBH_DMA 106
+#define IMX6QDL_CLK_ASRC 107
+#define IMX6QDL_CLK_CAN1_IPG 108
+#define IMX6QDL_CLK_CAN1_SERIAL 109
+#define IMX6QDL_CLK_CAN2_IPG 110
+#define IMX6QDL_CLK_CAN2_SERIAL 111
+#define IMX6QDL_CLK_ECSPI1 112
+#define IMX6QDL_CLK_ECSPI2 113
+#define IMX6QDL_CLK_ECSPI3 114
+#define IMX6QDL_CLK_ECSPI4 115
+#define IMX6Q_CLK_ECSPI5 116
+#define IMX6DL_CLK_I2C4 116
+#define IMX6QDL_CLK_ENET 117
+#define IMX6QDL_CLK_ESAI 118
+#define IMX6QDL_CLK_GPT_IPG 119
+#define IMX6QDL_CLK_GPT_IPG_PER 120
+#define IMX6QDL_CLK_GPU2D_CORE 121
+#define IMX6QDL_CLK_GPU3D_CORE 122
+#define IMX6QDL_CLK_HDMI_IAHB 123
+#define IMX6QDL_CLK_HDMI_ISFR 124
+#define IMX6QDL_CLK_I2C1 125
+#define IMX6QDL_CLK_I2C2 126
+#define IMX6QDL_CLK_I2C3 127
+#define IMX6QDL_CLK_IIM 128
+#define IMX6QDL_CLK_ENFC 129
+#define IMX6QDL_CLK_IPU1 130
+#define IMX6QDL_CLK_IPU1_DI0 131
+#define IMX6QDL_CLK_IPU1_DI1 132
+#define IMX6QDL_CLK_IPU2 133
+#define IMX6QDL_CLK_IPU2_DI0 134
+#define IMX6QDL_CLK_LDB_DI0 135
+#define IMX6QDL_CLK_LDB_DI1 136
+#define IMX6QDL_CLK_IPU2_DI1 137
+#define IMX6QDL_CLK_HSI_TX 138
+#define IMX6QDL_CLK_MLB 139
+#define IMX6QDL_CLK_MMDC_CH0_AXI 140
+#define IMX6QDL_CLK_MMDC_CH1_AXI 141
+#define IMX6QDL_CLK_OCRAM 142
+#define IMX6QDL_CLK_OPENVG_AXI 143
+#define IMX6QDL_CLK_PCIE_AXI 144
+#define IMX6QDL_CLK_PWM1 145
+#define IMX6QDL_CLK_PWM2 146
+#define IMX6QDL_CLK_PWM3 147
+#define IMX6QDL_CLK_PWM4 148
+#define IMX6QDL_CLK_PER1_BCH 149
+#define IMX6QDL_CLK_GPMI_BCH_APB 150
+#define IMX6QDL_CLK_GPMI_BCH 151
+#define IMX6QDL_CLK_GPMI_IO 152
+#define IMX6QDL_CLK_GPMI_APB 153
+#define IMX6QDL_CLK_SATA 154
+#define IMX6QDL_CLK_SDMA 155
+#define IMX6QDL_CLK_SPBA 156
+#define IMX6QDL_CLK_SSI1 157
+#define IMX6QDL_CLK_SSI2 158
+#define IMX6QDL_CLK_SSI3 159
+#define IMX6QDL_CLK_UART_IPG 160
+#define IMX6QDL_CLK_UART_SERIAL 161
+#define IMX6QDL_CLK_USBOH3 162
+#define IMX6QDL_CLK_USDHC1 163
+#define IMX6QDL_CLK_USDHC2 164
+#define IMX6QDL_CLK_USDHC3 165
+#define IMX6QDL_CLK_USDHC4 166
+#define IMX6QDL_CLK_VDO_AXI 167
+#define IMX6QDL_CLK_VPU_AXI 168
+#define IMX6QDL_CLK_CKO1 169
+#define IMX6QDL_CLK_PLL1_SYS 170
+#define IMX6QDL_CLK_PLL2_BUS 171
+#define IMX6QDL_CLK_PLL3_USB_OTG 172
+#define IMX6QDL_CLK_PLL4_AUDIO 173
+#define IMX6QDL_CLK_PLL5_VIDEO 174
+#define IMX6QDL_CLK_PLL8_MLB 175
+#define IMX6QDL_CLK_PLL7_USB_HOST 176
+#define IMX6QDL_CLK_PLL6_ENET 177
+#define IMX6QDL_CLK_SSI1_IPG 178
+#define IMX6QDL_CLK_SSI2_IPG 179
+#define IMX6QDL_CLK_SSI3_IPG 180
+#define IMX6QDL_CLK_ROM 181
+#define IMX6QDL_CLK_USBPHY1 182
+#define IMX6QDL_CLK_USBPHY2 183
+#define IMX6QDL_CLK_LDB_DI0_DIV_3_5 184
+#define IMX6QDL_CLK_LDB_DI1_DIV_3_5 185
+#define IMX6QDL_CLK_SATA_REF 186
+#define IMX6QDL_CLK_SATA_REF_100M 187
+#define IMX6QDL_CLK_PCIE_REF 188
+#define IMX6QDL_CLK_PCIE_REF_125M 189
+#define IMX6QDL_CLK_ENET_REF 190
+#define IMX6QDL_CLK_USBPHY1_GATE 191
+#define IMX6QDL_CLK_USBPHY2_GATE 192
+#define IMX6QDL_CLK_PLL4_POST_DIV 193
+#define IMX6QDL_CLK_PLL5_POST_DIV 194
+#define IMX6QDL_CLK_PLL5_VIDEO_DIV 195
+#define IMX6QDL_CLK_EIM_SLOW 196
+#define IMX6QDL_CLK_SPDIF 197
+#define IMX6QDL_CLK_CKO2_SEL 198
+#define IMX6QDL_CLK_CKO2_PODF 199
+#define IMX6QDL_CLK_CKO2 200
+#define IMX6QDL_CLK_CKO 201
+#define IMX6QDL_CLK_VDOA 202
+#define IMX6QDL_CLK_PLL4_AUDIO_DIV 203
+#define IMX6QDL_CLK_LVDS1_SEL 204
+#define IMX6QDL_CLK_LVDS2_SEL 205
+#define IMX6QDL_CLK_LVDS1_GATE 206
+#define IMX6QDL_CLK_LVDS2_GATE 207
+#define IMX6QDL_CLK_ESAI_AHB 208
+#define IMX6QDL_CLK_END 209
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index 1118f7a..f929a79e 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -59,6 +59,7 @@
#define R8A7790_CLK_SDHI0 14
#define R8A7790_CLK_MMCIF0 15
#define R8A7790_CLK_IIC0 18
+#define R8A7790_CLK_PCIEC 19
#define R8A7790_CLK_IIC1 23
#define R8A7790_CLK_SSUSB 28
#define R8A7790_CLK_CMT1 29
@@ -107,4 +108,30 @@
#define R8A7790_CLK_I2C1 30
#define R8A7790_CLK_I2C0 31
+/* MSTP10 */
+#define R8A7790_CLK_SSI_ALL 5
+#define R8A7790_CLK_SSI9 6
+#define R8A7790_CLK_SSI8 7
+#define R8A7790_CLK_SSI7 8
+#define R8A7790_CLK_SSI6 9
+#define R8A7790_CLK_SSI5 10
+#define R8A7790_CLK_SSI4 11
+#define R8A7790_CLK_SSI3 12
+#define R8A7790_CLK_SSI2 13
+#define R8A7790_CLK_SSI1 14
+#define R8A7790_CLK_SSI0 15
+#define R8A7790_CLK_SCU_ALL 17
+#define R8A7790_CLK_SCU_DVC1 18
+#define R8A7790_CLK_SCU_DVC0 19
+#define R8A7790_CLK_SCU_SRC9 22
+#define R8A7790_CLK_SCU_SRC8 23
+#define R8A7790_CLK_SCU_SRC7 24
+#define R8A7790_CLK_SCU_SRC6 25
+#define R8A7790_CLK_SCU_SRC5 26
+#define R8A7790_CLK_SCU_SRC4 27
+#define R8A7790_CLK_SCU_SRC3 28
+#define R8A7790_CLK_SCU_SRC2 29
+#define R8A7790_CLK_SCU_SRC1 30
+#define R8A7790_CLK_SCU_SRC0 31
+
#endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index b050d18..f0d4d10 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -53,6 +53,7 @@
#define R8A7791_CLK_SDHI0 14
#define R8A7791_CLK_MMCIF0 15
#define R8A7791_CLK_IIC0 18
+#define R8A7791_CLK_PCIEC 19
#define R8A7791_CLK_IIC1 23
#define R8A7791_CLK_SSUSB 28
#define R8A7791_CLK_CMT1 29
@@ -107,6 +108,32 @@
#define R8A7791_CLK_I2C1 30
#define R8A7791_CLK_I2C0 31
+/* MSTP10 */
+#define R8A7791_CLK_SSI_ALL 5
+#define R8A7791_CLK_SSI9 6
+#define R8A7791_CLK_SSI8 7
+#define R8A7791_CLK_SSI7 8
+#define R8A7791_CLK_SSI6 9
+#define R8A7791_CLK_SSI5 10
+#define R8A7791_CLK_SSI4 11
+#define R8A7791_CLK_SSI3 12
+#define R8A7791_CLK_SSI2 13
+#define R8A7791_CLK_SSI1 14
+#define R8A7791_CLK_SSI0 15
+#define R8A7791_CLK_SCU_ALL 17
+#define R8A7791_CLK_SCU_DVC1 18
+#define R8A7791_CLK_SCU_DVC0 19
+#define R8A7791_CLK_SCU_SRC9 22
+#define R8A7791_CLK_SCU_SRC8 23
+#define R8A7791_CLK_SCU_SRC7 24
+#define R8A7791_CLK_SCU_SRC6 25
+#define R8A7791_CLK_SCU_SRC5 26
+#define R8A7791_CLK_SCU_SRC4 27
+#define R8A7791_CLK_SCU_SRC3 28
+#define R8A7791_CLK_SCU_SRC2 29
+#define R8A7791_CLK_SCU_SRC1 30
+#define R8A7791_CLK_SCU_SRC0 31
+
/* MSTP11 */
#define R8A7791_CLK_SCIFA3 6
#define R8A7791_CLK_SCIFA4 7
diff --git a/include/dt-bindings/clock/rk3066a-cru.h b/include/dt-bindings/clock/rk3066a-cru.h
new file mode 100644
index 0000000..bc1ed1d
--- /dev/null
+++ b/include/dt-bindings/clock/rk3066a-cru.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/rk3188-cru-common.h>
+
+/* soft-reset indices */
+#define SRST_SRST1 0
+#define SRST_SRST2 1
+
+#define SRST_L2MEM 18
+#define SRST_I2S0 23
+#define SRST_I2S1 24
+#define SRST_I2S2 25
+#define SRST_TIMER2 29
+
+#define SRST_GPIO4 36
+#define SRST_GPIO6 38
+
+#define SRST_TSADC 92
+
+#define SRST_HDMI 96
+#define SRST_HDMI_APB 97
+#define SRST_CIF1 111
diff --git a/include/dt-bindings/clock/rk3188-cru-common.h b/include/dt-bindings/clock/rk3188-cru-common.h
new file mode 100644
index 0000000..750ee60
--- /dev/null
+++ b/include/dt-bindings/clock/rk3188-cru-common.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* core clocks from */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define CORE_PERI 5
+#define CORE_L2C 6
+
+/* sclk gates (special clocks) */
+#define SCLK_UART0 64
+#define SCLK_UART1 65
+#define SCLK_UART2 66
+#define SCLK_UART3 67
+#define SCLK_MAC 68
+#define SCLK_SPI0 69
+#define SCLK_SPI1 70
+#define SCLK_SARADC 71
+#define SCLK_SDMMC 72
+#define SCLK_SDIO 73
+#define SCLK_EMMC 74
+#define SCLK_I2S0 75
+#define SCLK_I2S1 76
+#define SCLK_I2S2 77
+#define SCLK_SPDIF 78
+#define SCLK_CIF0 79
+#define SCLK_CIF1 80
+#define SCLK_OTGPHY0 81
+#define SCLK_OTGPHY1 82
+#define SCLK_HSADC 83
+#define SCLK_TIMER0 84
+#define SCLK_TIMER1 85
+#define SCLK_TIMER2 86
+#define SCLK_TIMER3 87
+#define SCLK_TIMER4 88
+#define SCLK_TIMER5 89
+#define SCLK_TIMER6 90
+#define SCLK_JTAG 91
+#define SCLK_SMC 92
+
+#define DCLK_LCDC0 190
+#define DCLK_LCDC1 191
+
+/* aclk gates */
+#define ACLK_DMA1 192
+#define ACLK_DMA2 193
+#define ACLK_GPS 194
+#define ACLK_LCDC0 195
+#define ACLK_LCDC1 196
+#define ACLK_GPU 197
+#define ACLK_SMC 198
+#define ACLK_CIF 199
+#define ACLK_IPP 200
+#define ACLK_RGA 201
+#define ACLK_CIF0 202
+
+/* pclk gates */
+#define PCLK_GRF 320
+#define PCLK_PMU 321
+#define PCLK_TIMER0 322
+#define PCLK_TIMER1 323
+#define PCLK_TIMER2 324
+#define PCLK_TIMER3 325
+#define PCLK_PWM01 326
+#define PCLK_PWM23 327
+#define PCLK_SPI0 328
+#define PCLK_SPI1 329
+#define PCLK_SARADC 330
+#define PCLK_WDT 331
+#define PCLK_UART0 332
+#define PCLK_UART1 333
+#define PCLK_UART2 334
+#define PCLK_UART3 335
+#define PCLK_I2C0 336
+#define PCLK_I2C1 337
+#define PCLK_I2C2 338
+#define PCLK_I2C3 339
+#define PCLK_I2C4 340
+#define PCLK_GPIO0 341
+#define PCLK_GPIO1 342
+#define PCLK_GPIO2 343
+#define PCLK_GPIO3 344
+#define PCLK_GPIO4 345
+#define PCLK_GPIO6 346
+#define PCLK_EFUSE 347
+#define PCLK_TZPC 348
+#define PCLK_TSADC 349
+
+/* hclk gates */
+#define HCLK_SDMMC 448
+#define HCLK_SDIO 449
+#define HCLK_EMMC 450
+#define HCLK_OTG0 451
+#define HCLK_EMAC 452
+#define HCLK_SPDIF 453
+#define HCLK_I2S0 454
+#define HCLK_I2S1 455
+#define HCLK_I2S2 456
+#define HCLK_OTG1 457
+#define HCLK_HSIC 458
+#define HCLK_HSADC 459
+#define HCLK_PIDF 460
+#define HCLK_LCDC0 461
+#define HCLK_LCDC1 462
+#define HCLK_ROM 463
+#define HCLK_CIF0 464
+#define HCLK_IPP 465
+#define HCLK_RGA 466
+#define HCLK_NANDC0 467
+
+#define CLK_NR_CLKS (HCLK_NANDC0 + 1)
+
+/* soft-reset indices */
+#define SRST_MCORE 2
+#define SRST_CORE0 3
+#define SRST_CORE1 4
+#define SRST_MCORE_DBG 7
+#define SRST_CORE0_DBG 8
+#define SRST_CORE1_DBG 9
+#define SRST_CORE0_WDT 12
+#define SRST_CORE1_WDT 13
+#define SRST_STRC_SYS 14
+#define SRST_L2C 15
+
+#define SRST_CPU_AHB 17
+#define SRST_AHB2APB 19
+#define SRST_DMA1 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_SPDIF 26
+#define SRST_TIMER0 27
+#define SRST_TIMER1 28
+#define SRST_EFUSE 30
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_UART3 42
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_I2C3 46
+#define SRST_I2C4 47
+
+#define SRST_PWM0 48
+#define SRST_PWM1 49
+#define SRST_DAP_PO 50
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_TPIU_ATB 53
+#define SRST_PMU_APB 54
+#define SRST_GRF 55
+#define SRST_PMU 56
+#define SRST_PERI_AXI 57
+#define SRST_PERI_AHB 58
+#define SRST_PERI_APB 59
+#define SRST_PERI_NIU 60
+#define SRST_CPU_PERI 61
+#define SRST_EMEM_PERI 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMA2 64
+#define SRST_SMC 65
+#define SRST_MAC 66
+#define SRST_NANC0 68
+#define SRST_USBOTG0 69
+#define SRST_USBPHY0 70
+#define SRST_OTGC0 71
+#define SRST_USBOTG1 72
+#define SRST_USBPHY1 73
+#define SRST_OTGC1 74
+#define SRST_HSADC 76
+#define SRST_PIDFILTER 77
+#define SRST_DDR_MSCH 79
+
+#define SRST_TZPC 80
+#define SRST_SDMMC 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI0 84
+#define SRST_SPI1 85
+#define SRST_WDT 86
+#define SRST_SARADC 87
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_APB 89
+#define SRST_DDRCTL 90
+#define SRST_DDRCTL_APB 91
+#define SRST_DDRPUB 93
+
+#define SRST_VIO0_AXI 98
+#define SRST_VIO0_AHB 99
+#define SRST_LCDC0_AXI 100
+#define SRST_LCDC0_AHB 101
+#define SRST_LCDC0_DCLK 102
+#define SRST_LCDC1_AXI 103
+#define SRST_LCDC1_AHB 104
+#define SRST_LCDC1_DCLK 105
+#define SRST_IPP_AXI 106
+#define SRST_IPP_AHB 107
+#define SRST_RGA_AXI 108
+#define SRST_RGA_AHB 109
+#define SRST_CIF0 110
+
+#define SRST_VCODEC_AXI 112
+#define SRST_VCODEC_AHB 113
+#define SRST_VIO1_AXI 114
+#define SRST_VCODEC_CPU 115
+#define SRST_VCODEC_NIU 116
+#define SRST_GPU 120
+#define SRST_GPU_NIU 122
+#define SRST_TFUN_ATB 125
+#define SRST_TFUN_APB 126
+#define SRST_CTI4_APB 127
+
+#define SRST_TPIU_APB 128
+#define SRST_TRACE 129
+#define SRST_CORE_DBG 130
+#define SRST_DBG_APB 131
+#define SRST_CTI0 132
+#define SRST_CTI0_APB 133
+#define SRST_CTI1 134
+#define SRST_CTI1_APB 135
+#define SRST_PTM_CORE0 136
+#define SRST_PTM_CORE1 137
+#define SRST_PTM0 138
+#define SRST_PTM0_ATB 139
+#define SRST_PTM1 140
+#define SRST_PTM1_ATB 141
+#define SRST_CTM 142
+#define SRST_TS 143
diff --git a/include/dt-bindings/clock/rk3188-cru.h b/include/dt-bindings/clock/rk3188-cru.h
new file mode 100644
index 0000000..9fac8ed
--- /dev/null
+++ b/include/dt-bindings/clock/rk3188-cru.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/rk3188-cru-common.h>
+
+/* soft-reset indices */
+#define SRST_PTM_CORE2 0
+#define SRST_PTM_CORE3 1
+#define SRST_CORE2 5
+#define SRST_CORE3 6
+#define SRST_CORE2_DBG 10
+#define SRST_CORE3_DBG 11
+
+#define SRST_TIMER2 16
+#define SRST_TIMER4 23
+#define SRST_I2S0 24
+#define SRST_TIMER5 25
+#define SRST_TIMER3 29
+#define SRST_TIMER6 31
+
+#define SRST_PTM3 36
+#define SRST_PTM3_ATB 37
+
+#define SRST_GPS 67
+#define SRST_HSICPHY 75
+#define SRST_TIMER 78
+
+#define SRST_PTM2 92
+#define SRST_CORE2_WDT 94
+#define SRST_CORE3_WDT 95
+
+#define SRST_PTM2_ATB 111
+
+#define SRST_HSIC 117
+#define SRST_CTI2 118
+#define SRST_CTI2_APB 119
+#define SRST_GPU_BRIDGE 121
+#define SRST_CTI3 123
+#define SRST_CTI3_APB 124
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
new file mode 100644
index 0000000..ebcb460
--- /dev/null
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -0,0 +1,278 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define PLL_NPLL 5
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU 64
+#define SCLK_SPI0 65
+#define SCLK_SPI1 66
+#define SCLK_SPI2 67
+#define SCLK_SDMMC 68
+#define SCLK_SDIO0 69
+#define SCLK_SDIO1 70
+#define SCLK_EMMC 71
+#define SCLK_TSADC 72
+#define SCLK_SARADC 73
+#define SCLK_PS2C 74
+#define SCLK_NANDC0 75
+#define SCLK_NANDC1 76
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_UART3 80
+#define SCLK_UART4 81
+#define SCLK_I2S0 82
+#define SCLK_SPDIF 83
+#define SCLK_SPDIF8CH 84
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_TIMER4 89
+#define SCLK_TIMER5 90
+#define SCLK_TIMER6 91
+#define SCLK_HSADC 92
+#define SCLK_OTGPHY0 93
+#define SCLK_OTGPHY1 94
+#define SCLK_OTGPHY2 95
+#define SCLK_OTG_ADP 96
+#define SCLK_HSICPHY480M 97
+#define SCLK_HSICPHY12M 98
+#define SCLK_MACREF 99
+#define SCLK_LCDC_PWM0 100
+#define SCLK_LCDC_PWM1 101
+#define SCLK_MAC_RX 102
+#define SCLK_MAC_TX 103
+
+#define DCLK_VOP0 190
+#define DCLK_VOP1 191
+
+/* aclk gates */
+#define ACLK_GPU 192
+#define ACLK_DMAC1 193
+#define ACLK_DMAC2 194
+#define ACLK_MMU 195
+#define ACLK_GMAC 196
+#define ACLK_VOP0 197
+#define ACLK_VOP1 198
+#define ACLK_CRYPTO 199
+#define ACLK_RGA 200
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_GPIO4 324
+#define PCLK_GPIO5 325
+#define PCLK_GPIO6 326
+#define PCLK_GPIO7 327
+#define PCLK_GPIO8 328
+#define PCLK_GRF 329
+#define PCLK_SGRF 330
+#define PCLK_PMU 331
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_I2C4 336
+#define PCLK_I2C5 337
+#define PCLK_SPI0 338
+#define PCLK_SPI1 339
+#define PCLK_SPI2 340
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_UART3 344
+#define PCLK_UART4 345
+#define PCLK_TSADC 346
+#define PCLK_SARADC 347
+#define PCLK_SIM 348
+#define PCLK_GMAC 349
+#define PCLK_PWM 350
+#define PCLK_RKPWM 351
+#define PCLK_PS2C 352
+#define PCLK_TIMER 353
+#define PCLK_TZPC 354
+
+/* hclk gates */
+#define HCLK_GPS 448
+#define HCLK_OTG0 449
+#define HCLK_USBHOST0 450
+#define HCLK_USBHOST1 451
+#define HCLK_HSIC 452
+#define HCLK_NANDC0 453
+#define HCLK_NANDC1 454
+#define HCLK_TSP 455
+#define HCLK_SDMMC 456
+#define HCLK_SDIO0 457
+#define HCLK_SDIO1 458
+#define HCLK_EMMC 459
+#define HCLK_HSADC 460
+#define HCLK_CRYPTO 461
+#define HCLK_I2S0 462
+#define HCLK_SPDIF 463
+#define HCLK_SPDIF8CH 464
+#define HCLK_VOP0 465
+#define HCLK_VOP1 466
+#define HCLK_ROM 467
+#define HCLK_IEP 468
+#define HCLK_ISP 469
+#define HCLK_RGA 470
+
+#define CLK_NR_CLKS (HCLK_RGA + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0 0
+#define SRST_CORE1 1
+#define SRST_CORE2 2
+#define SRST_CORE3 3
+#define SRST_CORE0_PO 4
+#define SRST_CORE1_PO 5
+#define SRST_CORE2_PO 6
+#define SRST_CORE3_PO 7
+#define SRST_PDCORE_STRSYS 8
+#define SRST_PDBUS_STRSYS 9
+#define SRST_L2C 10
+#define SRST_TOPDBG 11
+#define SRST_CORE0_DBG 12
+#define SRST_CORE1_DBG 13
+#define SRST_CORE2_DBG 14
+#define SRST_CORE3_DBG 15
+
+#define SRST_PDBUG_AHB_ARBITOR 16
+#define SRST_EFUSE256 17
+#define SRST_DMAC1 18
+#define SRST_INTMEM 19
+#define SRST_ROM 20
+#define SRST_SPDIF8CH 21
+#define SRST_TIMER 22
+#define SRST_I2S0 23
+#define SRST_SPDIF 24
+#define SRST_TIMER0 25
+#define SRST_TIMER1 26
+#define SRST_TIMER2 27
+#define SRST_TIMER3 28
+#define SRST_TIMER4 29
+#define SRST_TIMER5 30
+#define SRST_EFUSE 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+#define SRST_GPIO4 36
+#define SRST_GPIO5 37
+#define SRST_GPIO6 38
+#define SRST_GPIO7 39
+#define SRST_GPIO8 40
+#define SRST_I2C0 42
+#define SRST_I2C1 43
+#define SRST_I2C2 44
+#define SRST_I2C3 45
+#define SRST_I2C4 46
+#define SRST_I2C5 47
+
+#define SRST_DWPWM 48
+#define SRST_MMC_PERI 49
+#define SRST_PERIPH_MMU 50
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_TPIU 53
+#define SRST_PMU_APB 54
+#define SRST_GRF 55
+#define SRST_PMU 56
+#define SRST_PERIPH_AXI 57
+#define SRST_PERIPH_AHB 58
+#define SRST_PERIPH_APB 59
+#define SRST_PERIPH_NIU 60
+#define SRST_PDPERI_AHB_ARBI 61
+#define SRST_EMEM 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMAC2 64
+#define SRST_MAC 66
+#define SRST_GPS 67
+#define SRST_RKPWM 69
+#define SRST_CCP 71
+#define SRST_USBHOST0 72
+#define SRST_HSIC 73
+#define SRST_HSIC_AUX 74
+#define SRST_HSIC_PHY 75
+#define SRST_HSADC 76
+#define SRST_NANDC0 77
+#define SRST_NANDC1 78
+
+#define SRST_TZPC 80
+#define SRST_SPI0 83
+#define SRST_SPI1 84
+#define SRST_SPI2 85
+#define SRST_SARADC 87
+#define SRST_PDALIVE_NIU 88
+#define SRST_PDPMU_INTMEM 89
+#define SRST_PDPMU_NIU 90
+#define SRST_SGRF 91
+
+#define SRST_VIO_ARBI 96
+#define SRST_RGA_NIU 97
+#define SRST_VIO0_NIU_AXI 98
+#define SRST_VIO_NIU_AHB 99
+#define SRST_LCDC0_AXI 100
+#define SRST_LCDC0_AHB 101
+#define SRST_LCDC0_DCLK 102
+#define SRST_VIO1_NIU_AXI 103
+#define SRST_VIP 104
+#define SRST_RGA_CORE 105
+#define SRST_IEP_AXI 106
+#define SRST_IEP_AHB 107
+#define SRST_RGA_AXI 108
+#define SRST_RGA_AHB 109
+#define SRST_ISP 110
+#define SRST_EDP 111
+
+#define SRST_VCODEC_AXI 112
+#define SRST_VCODEC_AHB 113
+#define SRST_VIO_H2P 114
+#define SRST_MIPIDSI0 115
+#define SRST_MIPIDSI1 116
+#define SRST_MIPICSI 117
+#define SRST_LVDS_PHY 118
+#define SRST_LVDS_CON 119
+#define SRST_GPU 120
+#define SRST_HDMI 121
+#define SRST_CORE_PVTM 124
+#define SRST_GPU_PVTM 125
+
+#define SRST_MMC0 128
+#define SRST_SDIO0 129
+#define SRST_SDIO1 130
+#define SRST_EMMC 131
+#define SRST_USBOTG_AHB 132
+#define SRST_USBOTG_PHY 133
+#define SRST_USBOTG_CON 134
+#define SRST_USBHOST0_AHB 135
+#define SRST_USBHOST0_PHY 136
+#define SRST_USBHOST0_CON 137
+#define SRST_USBHOST1_AHB 138
+#define SRST_USBHOST1_PHY 139
+#define SRST_USBHOST1_CON 140
+#define SRST_USB_ADP 141
+#define SRST_ACC_EFUSE 142
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
index a916029..00953d9 100644
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
@@ -164,6 +164,8 @@
#define VF610_CLK_DMAMUX1 151
#define VF610_CLK_DMAMUX2 152
#define VF610_CLK_DMAMUX3 153
-#define VF610_CLK_END 154
+#define VF610_CLK_FLEXCAN0_EN 154
+#define VF610_CLK_FLEXCAN1_EN 155
+#define VF610_CLK_END 156
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h b/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h
new file mode 100644
index 0000000..914d56d
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h
@@ -0,0 +1,7 @@
+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H
+#define _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H 1
+
+#define TEGRA_XUSB_PADCTL_PCIE 0
+#define TEGRA_XUSB_PADCTL_SATA 1
+
+#endif /* _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H */
diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h
deleted file mode 100644
index 4fd6c70..0000000
--- a/include/linux/platform_data/camera-mx1.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * mx1_camera.h - i.MX1/i.MXL camera driver header file
- *
- * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA camera.h file:
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define MX1_CAMERA_DATA_HIGH 1
-#define MX1_CAMERA_PCLK_RISING 2
-#define MX1_CAMERA_VSYNC_HIGH 4
-
-extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
-
-/**
- * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
- * @mclk_10khz: master clock frequency in 10kHz units
- * @flags: MX1 camera platform flags
- */
-struct mx1_camera_pdata {
- unsigned long mclk_10khz;
- unsigned long flags;
-};
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h
index 7eb9d13..157e71f 100644
--- a/include/linux/platform_data/usb-ehci-mxc.h
+++ b/include/linux/platform_data/usb-ehci-mxc.h
@@ -1,46 +1,6 @@
#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23)
-#define MXC_EHCI_FORCE_FS (1 << 24)
-#define MXC_EHCI_UTMI_8BIT (0 << 28)
-#define MXC_EHCI_UTMI_16BIT (1 << 28)
-#define MXC_EHCI_SERIAL (1 << 29)
-#define MXC_EHCI_MODE_UTMI (0 << 30)
-#define MXC_EHCI_MODE_PHILIPS (1 << 30)
-#define MXC_EHCI_MODE_ULPI (2 << 30)
-#define MXC_EHCI_MODE_SERIAL (3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0)
-#define MXC_EHCI_INTERFACE_MASK (0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7)
-#define MXC_EHCI_TTL_ENABLED (1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY (1 << 9)
-#define MXC_EHCI_IPPUE_DOWN (1 << 10)
-#define MXC_EHCI_IPPUE_UP (1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED (1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13)
-
-#define MXC_USBCTRL_OFFSET 0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc
-#define MXC_USBH2CTRL_OFFSET 0x14
-
-#define MX5_USBOTHER_REGS_OFFSET 0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0
-
struct mxc_usbh_platform_data {
int (*init)(struct platform_device *pdev);
int (*exit)(struct platform_device *pdev);
@@ -49,11 +9,5 @@
struct usb_phy *otg;
};
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
diff --git a/include/linux/platform_data/usb-imx_udc.h b/include/linux/platform_data/usb-imx_udc.h
deleted file mode 100644
index be27337..0000000
--- a/include/linux/platform_data/usb-imx_udc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_USB
-#define __ASM_ARCH_MXC_USB
-
-struct imxusb_platform_data {
- int (*init)(struct device *);
- void (*exit)(struct device *);
-};
-
-#endif /* __ASM_ARCH_MXC_USB */
diff --git a/include/linux/tegra-soc.h b/include/linux/tegra-soc.h
deleted file mode 100644
index 95f611d..0000000
--- a/include/linux/tegra-soc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __LINUX_TEGRA_SOC_H_
-#define __LINUX_TEGRA_SOC_H_
-
-u32 tegra_read_chipid(void);
-
-#endif /* __LINUX_TEGRA_SOC_H_ */
diff --git a/include/linux/tegra-ahb.h b/include/soc/tegra/ahb.h
similarity index 86%
rename from include/linux/tegra-ahb.h
rename to include/soc/tegra/ahb.h
index f1cd075..504eb6f 100644
--- a/include/linux/tegra-ahb.h
+++ b/include/soc/tegra/ahb.h
@@ -11,9 +11,9 @@
* more details.
*/
-#ifndef __LINUX_AHB_H__
-#define __LINUX_AHB_H__
+#ifndef __SOC_TEGRA_AHB_H__
+#define __SOC_TEGRA_AHB_H__
extern int tegra_ahb_enable_smmu(struct device_node *ahb);
-#endif /* __LINUX_AHB_H__ */
+#endif /* __SOC_TEGRA_AHB_H__ */
diff --git a/include/linux/tegra-cpuidle.h b/include/soc/tegra/cpuidle.h
similarity index 86%
rename from include/linux/tegra-cpuidle.h
rename to include/soc/tegra/cpuidle.h
index 9c6286b..ea04f42 100644
--- a/include/linux/tegra-cpuidle.h
+++ b/include/soc/tegra/cpuidle.h
@@ -11,8 +11,8 @@
* more details.
*/
-#ifndef __LINUX_TEGRA_CPUIDLE_H__
-#define __LINUX_TEGRA_CPUIDLE_H__
+#ifndef __SOC_TEGRA_CPUIDLE_H__
+#define __SOC_TEGRA_CPUIDLE_H__
#ifdef CONFIG_CPU_IDLE
void tegra_cpuidle_pcie_irqs_in_use(void);
@@ -22,4 +22,4 @@
}
#endif
-#endif
+#endif /* __SOC_TEGRA_CPUIDLE_H__ */
diff --git a/include/soc/tegra/fuse.h b/include/soc/tegra/fuse.h
new file mode 100644
index 0000000..738712d
--- /dev/null
+++ b/include/soc/tegra/fuse.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __SOC_TEGRA_FUSE_H__
+#define __SOC_TEGRA_FUSE_H__
+
+#define TEGRA20 0x20
+#define TEGRA30 0x30
+#define TEGRA114 0x35
+#define TEGRA124 0x40
+
+#define TEGRA_FUSE_SKU_CALIB_0 0xf0
+#define TEGRA30_FUSE_SATA_CALIB 0x124
+
+#ifndef __ASSEMBLY__
+
+u32 tegra_read_chipid(void);
+u8 tegra_get_chip_id(void);
+
+enum tegra_revision {
+ TEGRA_REVISION_UNKNOWN = 0,
+ TEGRA_REVISION_A01,
+ TEGRA_REVISION_A02,
+ TEGRA_REVISION_A03,
+ TEGRA_REVISION_A03p,
+ TEGRA_REVISION_A04,
+ TEGRA_REVISION_MAX,
+};
+
+struct tegra_sku_info {
+ int sku_id;
+ int cpu_process_id;
+ int cpu_speedo_id;
+ int cpu_speedo_value;
+ int cpu_iddq_value;
+ int core_process_id;
+ int soc_speedo_id;
+ int gpu_speedo_id;
+ int gpu_process_id;
+ int gpu_speedo_value;
+ enum tegra_revision revision;
+};
+
+u32 tegra_read_straps(void);
+u32 tegra_read_chipid(void);
+void tegra_init_fuse(void);
+int tegra_fuse_readl(unsigned long offset, u32 *value);
+
+extern struct tegra_sku_info tegra_sku_info;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __SOC_TEGRA_FUSE_H__ */
diff --git a/include/linux/tegra-powergate.h b/include/soc/tegra/powergate.h
similarity index 96%
rename from include/linux/tegra-powergate.h
rename to include/soc/tegra/powergate.h
index 46f0a07..c16912e 100644
--- a/include/linux/tegra-powergate.h
+++ b/include/soc/tegra/powergate.h
@@ -15,8 +15,8 @@
*
*/
-#ifndef _MACH_TEGRA_POWERGATE_H_
-#define _MACH_TEGRA_POWERGATE_H_
+#ifndef __SOC_TEGRA_POWERGATE_H__
+#define __SOC_TEGRA_POWERGATE_H__
struct clk;
struct reset_control;
@@ -131,4 +131,4 @@
}
#endif
-#endif /* _MACH_TEGRA_POWERGATE_H_ */
+#endif /* __SOC_TEGRA_POWERGATE_H__ */