arch/arm/mach-imx/mach-vpr200.c - kernel/msm-4.19 - Gitiles

 /*
  * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
  * Copyright 2010 Creative Product Design
  *
  * Derived from mx35 3stack.
  * Original author: Fabio Estevam <fabio.estevam@freescale.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/memory.h>
 #include <linux/gpio.h>

 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>

 #include <linux/i2c.h>
 #include <linux/platform_data/at24.h>
 #include <linux/mfd/mc13xxx.h>

 #include "common.h"
 #include "devices-imx35.h"
 #include "hardware.h"
 #include "iomux-mx35.h"

 #define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
 #define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)

 #define GPIO_BUTTON1	IMX_GPIO_NR(1, 4)
 #define GPIO_BUTTON2	IMX_GPIO_NR(1, 5)
 #define GPIO_BUTTON3	IMX_GPIO_NR(1, 7)
 #define GPIO_BUTTON4	IMX_GPIO_NR(1, 8)
 #define GPIO_BUTTON5	IMX_GPIO_NR(1, 9)
 #define GPIO_BUTTON6	IMX_GPIO_NR(1, 10)
 #define GPIO_BUTTON7	IMX_GPIO_NR(1, 11)
 #define GPIO_BUTTON8	IMX_GPIO_NR(1, 12)

 static const struct fb_videomode fb_modedb[] = {
 	{
 		/* 800x480 @ 60 Hz */
 		.name		= "PT0708048",
 		.refresh	= 60,
 		.xres		= 800,
 		.yres		= 480,
 		.pixclock	= KHZ2PICOS(33260),
 		.left_margin	= 50,
 		.right_margin	= 156,
 		.upper_margin	= 10,
 		.lower_margin	= 10,
 		.hsync_len	= 1,	/* note: DE only display */
 		.vsync_len	= 1,	/* note: DE only display */
 		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
 	}, {
 		/* 800x480 @ 60 Hz */
 		.name		= "CTP-CLAA070LC0ACW",
 		.refresh	= 60,
 		.xres		= 800,
 		.yres		= 480,
 		.pixclock	= KHZ2PICOS(27000),
 		.left_margin	= 50,
 		.right_margin	= 50,	/* whole line should have 900 clocks */
 		.upper_margin	= 10,
 		.lower_margin	= 10,	/* whole frame should have 500 lines */
 		.hsync_len	= 1,	/* note: DE only display */
 		.vsync_len	= 1,	/* note: DE only display */
 		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
 	}
 };

 static struct mx3fb_platform_data mx3fb_pdata __initdata = {
 	.name		= "PT0708048",
 	.mode		= fb_modedb,
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };

 static struct physmap_flash_data vpr200_flash_data = {
 	.width  = 2,
 };

 static struct resource vpr200_flash_resource = {
 	.start	= MX35_CS0_BASE_ADDR,
 	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
 	.flags	= IORESOURCE_MEM,
 };

 static struct platform_device vpr200_flash = {
 	.name	= "physmap-flash",
 	.id	= 0,
 	.dev	= {
 		.platform_data  = &vpr200_flash_data,
 	},
 	.resource = &vpr200_flash_resource,
 	.num_resources = 1,
 };

 static const struct mxc_nand_platform_data
 		vpr200_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 	.flash_bbt = 1,
 };

 #define VPR_KEY_DEBOUNCE	500
 static struct gpio_keys_button vpr200_gpio_keys_table[] = {
 	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
 	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
 	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
 	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
 	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
 	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
 	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
 	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
 };

 static const struct gpio_keys_platform_data
 		vpr200_gpio_keys_data __initconst = {
 	.buttons = vpr200_gpio_keys_table,
 	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
 };

 static struct mc13xxx_platform_data vpr200_pmic = {
 	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
 };

 static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
 	.bitrate = 50000,
 };

 static struct at24_platform_data vpr200_eeprom = {
 	.byte_len = 2048 / 8,
 	.page_size = 1,
 };

 static struct i2c_board_info vpr200_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
 		.platform_data = &vpr200_eeprom,
 	}, {
 		I2C_BOARD_INFO("mc13892", 0x08),
 		.platform_data = &vpr200_pmic,
 		/* irq number is run-time assigned */
 	}
 };

 static iomux_v3_cfg_t vpr200_pads[] = {
 	/* UART1 */
 	MX35_PAD_TXD1__UART1_TXD_MUX,
 	MX35_PAD_RXD1__UART1_RXD_MUX,
 	/* UART3 */
 	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
 	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
 	/* FEC */
 	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
 	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
 	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
 	MX35_PAD_FEC_COL__FEC_COL,
 	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
 	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
 	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
 	MX35_PAD_FEC_MDC__FEC_MDC,
 	MX35_PAD_FEC_MDIO__FEC_MDIO,
 	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
 	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
 	MX35_PAD_FEC_CRS__FEC_CRS,
 	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
 	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
 	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
 	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
 	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
 	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
 	/* Display */
 	MX35_PAD_LD0__IPU_DISPB_DAT_0,
 	MX35_PAD_LD1__IPU_DISPB_DAT_1,
 	MX35_PAD_LD2__IPU_DISPB_DAT_2,
 	MX35_PAD_LD3__IPU_DISPB_DAT_3,
 	MX35_PAD_LD4__IPU_DISPB_DAT_4,
 	MX35_PAD_LD5__IPU_DISPB_DAT_5,
 	MX35_PAD_LD6__IPU_DISPB_DAT_6,
 	MX35_PAD_LD7__IPU_DISPB_DAT_7,
 	MX35_PAD_LD8__IPU_DISPB_DAT_8,
 	MX35_PAD_LD9__IPU_DISPB_DAT_9,
 	MX35_PAD_LD10__IPU_DISPB_DAT_10,
 	MX35_PAD_LD11__IPU_DISPB_DAT_11,
 	MX35_PAD_LD12__IPU_DISPB_DAT_12,
 	MX35_PAD_LD13__IPU_DISPB_DAT_13,
 	MX35_PAD_LD14__IPU_DISPB_DAT_14,
 	MX35_PAD_LD15__IPU_DISPB_DAT_15,
 	MX35_PAD_LD16__IPU_DISPB_DAT_16,
 	MX35_PAD_LD17__IPU_DISPB_DAT_17,
 	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
 	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
 	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
 	/* LCD Enable */
 	MX35_PAD_D3_VSYNC__GPIO1_2,
 	/* USBOTG */
 	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
 	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
 	/* SDCARD */
 	MX35_PAD_SD1_CMD__ESDHC1_CMD,
 	MX35_PAD_SD1_CLK__ESDHC1_CLK,
 	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
 	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
 	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
 	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 	/* PMIC */
 	MX35_PAD_GPIO2_0__GPIO2_0,
 	/* GPIO keys */
 	MX35_PAD_SCKR__GPIO1_4,
 	MX35_PAD_COMPARE__GPIO1_5,
 	MX35_PAD_SCKT__GPIO1_7,
 	MX35_PAD_FST__GPIO1_8,
 	MX35_PAD_HCKT__GPIO1_9,
 	MX35_PAD_TX5_RX0__GPIO1_10,
 	MX35_PAD_TX4_RX1__GPIO1_11,
 	MX35_PAD_TX3_RX2__GPIO1_12,
 };

 /* USB Device config */
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI,
 	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
 };

 static int vpr200_usbh_init(struct platform_device *pdev)
 {
 	return mx35_initialize_usb_hw(pdev->id,
 			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
 }

 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
 	.init = vpr200_usbh_init,
 	.portsc = MXC_EHCI_MODE_SERIAL,
 };

 static struct platform_device *devices[] __initdata = {
 	&vpr200_flash,
 };

 /*
  * Board specific initialization.
  */
 static void __init vpr200_board_init(void)
 {
 	imx35_soc_init();

 	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));

 	imx35_add_fec(NULL);
 	imx35_add_imx2_wdt();
 	imx_add_gpio_keys(&vpr200_gpio_keys_data);

 	platform_add_devices(devices, ARRAY_SIZE(devices));

 	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
 		printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
 	else
 		gpio_direction_output(GPIO_LCDPWR, 0);

 	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
 		printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
 	else
 		gpio_direction_input(GPIO_PMIC_INT);

 	imx35_add_imx_uart0(NULL);
 	imx35_add_imx_uart2(NULL);

 	imx35_add_ipu_core();
 	imx35_add_mx3_sdc_fb(&mx3fb_pdata);

 	imx35_add_fsl_usb2_udc(&otg_device_pdata);
 	imx35_add_mxc_ehci_hs(&usb_host_pdata);

 	imx35_add_mxc_nand(&vpr200_nand_board_info);
 	imx35_add_sdhci_esdhc_imx(0, NULL);

 	vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
 	i2c_register_board_info(0, vpr200_i2c_devices,
 			ARRAY_SIZE(vpr200_i2c_devices));

 	imx35_add_imx_i2c0(&vpr200_i2c0_data);
 }

 static void __init vpr200_timer_init(void)
 {
 	mx35_clocks_init();
 }

 MACHINE_START(VPR200, "VPR200")
 	/* Maintainer: Creative Product Design */
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
 	.init_time = vpr200_timer_init,
 	.init_machine = vpr200_board_init,
 	.restart	= mxc_restart,
 MACHINE_END
	/*
	* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
	* Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
	* Copyright 2010 Creative Product Design
	*
	* Derived from mx35 3stack.
	* Original author: Fabio Estevam <fabio.estevam@freescale.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/types.h>
	#include <linux/init.h>
	#include <linux/platform_device.h>
	#include <linux/mtd/physmap.h>
	#include <linux/memory.h>
	#include <linux/gpio.h>

	#include <asm/mach-types.h>
	#include <asm/mach/arch.h>
	#include <asm/mach/time.h>

	#include <linux/i2c.h>
	#include <linux/platform_data/at24.h>
	#include <linux/mfd/mc13xxx.h>

	#include "common.h"
	#include "devices-imx35.h"
	#include "hardware.h"
	#include "iomux-mx35.h"

	#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
	#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)

	#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4)
	#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5)
	#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7)
	#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8)
	#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9)
	#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10)
	#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11)
	#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12)

	static const struct fb_videomode fb_modedb[] = {
	{
	/* 800x480 @ 60 Hz */
	.name = "PT0708048",
	.refresh = 60,
	.xres = 800,
	.yres = 480,
	.pixclock = KHZ2PICOS(33260),
	.left_margin = 50,
	.right_margin = 156,
	.upper_margin = 10,
	.lower_margin = 10,
	.hsync_len = 1, /* note: DE only display */
	.vsync_len = 1, /* note: DE only display */
	.sync = FB_SYNC_CLK_IDLE_EN \| FB_SYNC_OE_ACT_HIGH,
	.vmode = FB_VMODE_NONINTERLACED,
	.flag = 0,
	}, {
	/* 800x480 @ 60 Hz */
	.name = "CTP-CLAA070LC0ACW",
	.refresh = 60,
	.xres = 800,
	.yres = 480,
	.pixclock = KHZ2PICOS(27000),
	.left_margin = 50,
	.right_margin = 50, /* whole line should have 900 clocks */
	.upper_margin = 10,
	.lower_margin = 10, /* whole frame should have 500 lines */
	.hsync_len = 1, /* note: DE only display */
	.vsync_len = 1, /* note: DE only display */
	.sync = FB_SYNC_CLK_IDLE_EN \| FB_SYNC_OE_ACT_HIGH,
	.vmode = FB_VMODE_NONINTERLACED,
	.flag = 0,
	}
	};

	static struct mx3fb_platform_data mx3fb_pdata __initdata = {
	.name = "PT0708048",
	.mode = fb_modedb,
	.num_modes = ARRAY_SIZE(fb_modedb),
	};

	static struct physmap_flash_data vpr200_flash_data = {
	.width = 2,
	};

	static struct resource vpr200_flash_resource = {
	.start = MX35_CS0_BASE_ADDR,
	.end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
	.flags = IORESOURCE_MEM,
	};

	static struct platform_device vpr200_flash = {
	.name = "physmap-flash",
	.id = 0,
	.dev = {
	.platform_data = &vpr200_flash_data,
	},
	.resource = &vpr200_flash_resource,
	.num_resources = 1,
	};

	static const struct mxc_nand_platform_data
	vpr200_nand_board_info __initconst = {
	.width = 1,
	.hw_ecc = 1,
	.flash_bbt = 1,
	};

	#define VPR_KEY_DEBOUNCE 500
	static struct gpio_keys_button vpr200_gpio_keys_table[] = {
	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
	};

	static const struct gpio_keys_platform_data
	vpr200_gpio_keys_data __initconst = {
	.buttons = vpr200_gpio_keys_table,
	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
	};

	static struct mc13xxx_platform_data vpr200_pmic = {
	.flags = MC13XXX_USE_ADC \| MC13XXX_USE_TOUCHSCREEN,
	};

	static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
	.bitrate = 50000,
	};

	static struct at24_platform_data vpr200_eeprom = {
	.byte_len = 2048 / 8,
	.page_size = 1,
	};

	static struct i2c_board_info vpr200_i2c_devices[] = {
	{
	I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
	.platform_data = &vpr200_eeprom,
	}, {
	I2C_BOARD_INFO("mc13892", 0x08),
	.platform_data = &vpr200_pmic,
	/* irq number is run-time assigned */
	}
	};

	static iomux_v3_cfg_t vpr200_pads[] = {
	/* UART1 */
	MX35_PAD_TXD1__UART1_TXD_MUX,
	MX35_PAD_RXD1__UART1_RXD_MUX,
	/* UART3 */
	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
	/* FEC */
	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
	MX35_PAD_FEC_COL__FEC_COL,
	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
	MX35_PAD_FEC_MDC__FEC_MDC,
	MX35_PAD_FEC_MDIO__FEC_MDIO,
	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
	MX35_PAD_FEC_CRS__FEC_CRS,
	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
	/* Display */
	MX35_PAD_LD0__IPU_DISPB_DAT_0,
	MX35_PAD_LD1__IPU_DISPB_DAT_1,
	MX35_PAD_LD2__IPU_DISPB_DAT_2,
	MX35_PAD_LD3__IPU_DISPB_DAT_3,
	MX35_PAD_LD4__IPU_DISPB_DAT_4,
	MX35_PAD_LD5__IPU_DISPB_DAT_5,
	MX35_PAD_LD6__IPU_DISPB_DAT_6,
	MX35_PAD_LD7__IPU_DISPB_DAT_7,
	MX35_PAD_LD8__IPU_DISPB_DAT_8,
	MX35_PAD_LD9__IPU_DISPB_DAT_9,
	MX35_PAD_LD10__IPU_DISPB_DAT_10,
	MX35_PAD_LD11__IPU_DISPB_DAT_11,
	MX35_PAD_LD12__IPU_DISPB_DAT_12,
	MX35_PAD_LD13__IPU_DISPB_DAT_13,
	MX35_PAD_LD14__IPU_DISPB_DAT_14,
	MX35_PAD_LD15__IPU_DISPB_DAT_15,
	MX35_PAD_LD16__IPU_DISPB_DAT_16,
	MX35_PAD_LD17__IPU_DISPB_DAT_17,
	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
	/* LCD Enable */
	MX35_PAD_D3_VSYNC__GPIO1_2,
	/* USBOTG */
	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
	/* SDCARD */
	MX35_PAD_SD1_CMD__ESDHC1_CMD,
	MX35_PAD_SD1_CLK__ESDHC1_CLK,
	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
	/* PMIC */
	MX35_PAD_GPIO2_0__GPIO2_0,
	/* GPIO keys */
	MX35_PAD_SCKR__GPIO1_4,
	MX35_PAD_COMPARE__GPIO1_5,
	MX35_PAD_SCKT__GPIO1_7,
	MX35_PAD_FST__GPIO1_8,
	MX35_PAD_HCKT__GPIO1_9,
	MX35_PAD_TX5_RX0__GPIO1_10,
	MX35_PAD_TX4_RX1__GPIO1_11,
	MX35_PAD_TX3_RX2__GPIO1_12,
	};

	/* USB Device config */
	static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
	.operating_mode = FSL_USB2_DR_DEVICE,
	.phy_mode = FSL_USB2_PHY_UTMI,
	.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
	};

	static int vpr200_usbh_init(struct platform_device *pdev)
	{
	return mx35_initialize_usb_hw(pdev->id,
	MXC_EHCI_INTERFACE_SINGLE_UNI \| MXC_EHCI_INTERNAL_PHY);
	}

	/* USB HOST config */
	static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
	.init = vpr200_usbh_init,
	.portsc = MXC_EHCI_MODE_SERIAL,
	};

	static struct platform_device *devices[] __initdata = {
	&vpr200_flash,
	};

	/*
	* Board specific initialization.
	*/
	static void __init vpr200_board_init(void)
	{
	imx35_soc_init();

	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));

	imx35_add_fec(NULL);
	imx35_add_imx2_wdt();
	imx_add_gpio_keys(&vpr200_gpio_keys_data);

	platform_add_devices(devices, ARRAY_SIZE(devices));

	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
	printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
	else
	gpio_direction_output(GPIO_LCDPWR, 0);

	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
	printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
	else
	gpio_direction_input(GPIO_PMIC_INT);

	imx35_add_imx_uart0(NULL);
	imx35_add_imx_uart2(NULL);

	imx35_add_ipu_core();
	imx35_add_mx3_sdc_fb(&mx3fb_pdata);

	imx35_add_fsl_usb2_udc(&otg_device_pdata);
	imx35_add_mxc_ehci_hs(&usb_host_pdata);

	imx35_add_mxc_nand(&vpr200_nand_board_info);
	imx35_add_sdhci_esdhc_imx(0, NULL);

	vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
	i2c_register_board_info(0, vpr200_i2c_devices,
	ARRAY_SIZE(vpr200_i2c_devices));

	imx35_add_imx_i2c0(&vpr200_i2c0_data);
	}

	static void __init vpr200_timer_init(void)
	{
	mx35_clocks_init();
	}

	MACHINE_START(VPR200, "VPR200")
	/* Maintainer: Creative Product Design */
	.map_io = mx35_map_io,
	.init_early = imx35_init_early,
	.init_irq = mx35_init_irq,
	.init_time = vpr200_timer_init,
	.init_machine = vpr200_board_init,
	.restart = mxc_restart,
	MACHINE_END