| /* |
| * linux/drivers/video/imxfb.c |
| * |
| * Freescale i.MX Frame Buffer device driver |
| * |
| * Copyright (C) 2004 Sascha Hauer, Pengutronix |
| * Based on acornfb.c Copyright (C) Russell King. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| * |
| * Please direct your questions and comments on this driver to the following |
| * email address: |
| * |
| * linux-arm-kernel@lists.arm.linux.org.uk |
| */ |
| |
| //#define DEBUG 1 |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/fb.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/cpufreq.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/io.h> |
| #include <asm/uaccess.h> |
| #include <asm/arch/imxfb.h> |
| |
| /* |
| * Complain if VAR is out of range. |
| */ |
| #define DEBUG_VAR 1 |
| |
| #include "imxfb.h" |
| |
| static struct imxfb_rgb def_rgb_16 = { |
| .red = { .offset = 8, .length = 4, }, |
| .green = { .offset = 4, .length = 4, }, |
| .blue = { .offset = 0, .length = 4, }, |
| .transp = { .offset = 0, .length = 0, }, |
| }; |
| |
| static struct imxfb_rgb def_rgb_8 = { |
| .red = { .offset = 0, .length = 8, }, |
| .green = { .offset = 0, .length = 8, }, |
| .blue = { .offset = 0, .length = 8, }, |
| .transp = { .offset = 0, .length = 0, }, |
| }; |
| |
| static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info); |
| |
| static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf) |
| { |
| chan &= 0xffff; |
| chan >>= 16 - bf->length; |
| return chan << bf->offset; |
| } |
| |
| #define LCDC_PALETTE(x) __REG2(IMX_LCDC_BASE+0x800, (x)<<2) |
| static int |
| imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int trans, struct fb_info *info) |
| { |
| struct imxfb_info *fbi = info->par; |
| u_int val, ret = 1; |
| |
| #define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16) |
| if (regno < fbi->palette_size) { |
| val = (CNVT_TOHW(red, 4) << 8) | |
| (CNVT_TOHW(green,4) << 4) | |
| CNVT_TOHW(blue, 4); |
| |
| LCDC_PALETTE(regno) = val; |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| static int |
| imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int trans, struct fb_info *info) |
| { |
| struct imxfb_info *fbi = info->par; |
| unsigned int val; |
| int ret = 1; |
| |
| /* |
| * If inverse mode was selected, invert all the colours |
| * rather than the register number. The register number |
| * is what you poke into the framebuffer to produce the |
| * colour you requested. |
| */ |
| if (fbi->cmap_inverse) { |
| red = 0xffff - red; |
| green = 0xffff - green; |
| blue = 0xffff - blue; |
| } |
| |
| /* |
| * If greyscale is true, then we convert the RGB value |
| * to greyscale no mater what visual we are using. |
| */ |
| if (info->var.grayscale) |
| red = green = blue = (19595 * red + 38470 * green + |
| 7471 * blue) >> 16; |
| |
| switch (info->fix.visual) { |
| case FB_VISUAL_TRUECOLOR: |
| /* |
| * 12 or 16-bit True Colour. We encode the RGB value |
| * according to the RGB bitfield information. |
| */ |
| if (regno < 16) { |
| u32 *pal = info->pseudo_palette; |
| |
| val = chan_to_field(red, &info->var.red); |
| val |= chan_to_field(green, &info->var.green); |
| val |= chan_to_field(blue, &info->var.blue); |
| |
| pal[regno] = val; |
| ret = 0; |
| } |
| break; |
| |
| case FB_VISUAL_STATIC_PSEUDOCOLOR: |
| case FB_VISUAL_PSEUDOCOLOR: |
| ret = imxfb_setpalettereg(regno, red, green, blue, trans, info); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * imxfb_check_var(): |
| * Round up in the following order: bits_per_pixel, xres, |
| * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, |
| * bitfields, horizontal timing, vertical timing. |
| */ |
| static int |
| imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| struct imxfb_info *fbi = info->par; |
| int rgbidx; |
| |
| if (var->xres < MIN_XRES) |
| var->xres = MIN_XRES; |
| if (var->yres < MIN_YRES) |
| var->yres = MIN_YRES; |
| if (var->xres > fbi->max_xres) |
| var->xres = fbi->max_xres; |
| if (var->yres > fbi->max_yres) |
| var->yres = fbi->max_yres; |
| var->xres_virtual = max(var->xres_virtual, var->xres); |
| var->yres_virtual = max(var->yres_virtual, var->yres); |
| |
| pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel); |
| switch (var->bits_per_pixel) { |
| case 16: |
| rgbidx = RGB_16; |
| break; |
| case 8: |
| rgbidx = RGB_8; |
| break; |
| default: |
| rgbidx = RGB_16; |
| } |
| |
| /* |
| * Copy the RGB parameters for this display |
| * from the machine specific parameters. |
| */ |
| var->red = fbi->rgb[rgbidx]->red; |
| var->green = fbi->rgb[rgbidx]->green; |
| var->blue = fbi->rgb[rgbidx]->blue; |
| var->transp = fbi->rgb[rgbidx]->transp; |
| |
| pr_debug("RGBT length = %d:%d:%d:%d\n", |
| var->red.length, var->green.length, var->blue.length, |
| var->transp.length); |
| |
| pr_debug("RGBT offset = %d:%d:%d:%d\n", |
| var->red.offset, var->green.offset, var->blue.offset, |
| var->transp.offset); |
| |
| return 0; |
| } |
| |
| /* |
| * imxfb_set_par(): |
| * Set the user defined part of the display for the specified console |
| */ |
| static int imxfb_set_par(struct fb_info *info) |
| { |
| struct imxfb_info *fbi = info->par; |
| struct fb_var_screeninfo *var = &info->var; |
| |
| pr_debug("set_par\n"); |
| |
| if (var->bits_per_pixel == 16) |
| info->fix.visual = FB_VISUAL_TRUECOLOR; |
| else if (!fbi->cmap_static) |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| else { |
| /* |
| * Some people have weird ideas about wanting static |
| * pseudocolor maps. I suspect their user space |
| * applications are broken. |
| */ |
| info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; |
| } |
| |
| info->fix.line_length = var->xres_virtual * |
| var->bits_per_pixel / 8; |
| fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16; |
| |
| imxfb_activate_var(var, info); |
| |
| return 0; |
| } |
| |
| static void imxfb_enable_controller(struct imxfb_info *fbi) |
| { |
| pr_debug("Enabling LCD controller\n"); |
| |
| /* initialize LCDC */ |
| LCDC_RMCR &= ~RMCR_LCDC_EN; /* just to be safe... */ |
| |
| LCDC_SSA = fbi->screen_dma; |
| /* physical screen start address */ |
| LCDC_VPW = VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4); |
| |
| LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */ |
| |
| /* disable hardware cursor */ |
| LCDC_CPOS &= ~(CPOS_CC0 | CPOS_CC1); |
| |
| LCDC_RMCR = RMCR_LCDC_EN; |
| |
| if(fbi->backlight_power) |
| fbi->backlight_power(1); |
| if(fbi->lcd_power) |
| fbi->lcd_power(1); |
| } |
| |
| static void imxfb_disable_controller(struct imxfb_info *fbi) |
| { |
| pr_debug("Disabling LCD controller\n"); |
| |
| if(fbi->backlight_power) |
| fbi->backlight_power(0); |
| if(fbi->lcd_power) |
| fbi->lcd_power(0); |
| |
| LCDC_RMCR = 0; |
| } |
| |
| static int imxfb_blank(int blank, struct fb_info *info) |
| { |
| struct imxfb_info *fbi = info->par; |
| |
| pr_debug("imxfb_blank: blank=%d\n", blank); |
| |
| switch (blank) { |
| case FB_BLANK_POWERDOWN: |
| case FB_BLANK_VSYNC_SUSPEND: |
| case FB_BLANK_HSYNC_SUSPEND: |
| case FB_BLANK_NORMAL: |
| imxfb_disable_controller(fbi); |
| break; |
| |
| case FB_BLANK_UNBLANK: |
| imxfb_enable_controller(fbi); |
| break; |
| } |
| return 0; |
| } |
| |
| static struct fb_ops imxfb_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = imxfb_check_var, |
| .fb_set_par = imxfb_set_par, |
| .fb_setcolreg = imxfb_setcolreg, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| .fb_blank = imxfb_blank, |
| }; |
| |
| /* |
| * imxfb_activate_var(): |
| * Configures LCD Controller based on entries in var parameter. Settings are |
| * only written to the controller if changes were made. |
| */ |
| static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| struct imxfb_info *fbi = info->par; |
| pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", |
| var->xres, var->hsync_len, |
| var->left_margin, var->right_margin); |
| pr_debug("var: yres=%d vslen=%d um=%d bm=%d\n", |
| var->yres, var->vsync_len, |
| var->upper_margin, var->lower_margin); |
| |
| #if DEBUG_VAR |
| if (var->xres < 16 || var->xres > 1024) |
| printk(KERN_ERR "%s: invalid xres %d\n", |
| info->fix.id, var->xres); |
| if (var->hsync_len < 1 || var->hsync_len > 64) |
| printk(KERN_ERR "%s: invalid hsync_len %d\n", |
| info->fix.id, var->hsync_len); |
| if (var->left_margin > 255) |
| printk(KERN_ERR "%s: invalid left_margin %d\n", |
| info->fix.id, var->left_margin); |
| if (var->right_margin > 255) |
| printk(KERN_ERR "%s: invalid right_margin %d\n", |
| info->fix.id, var->right_margin); |
| if (var->yres < 1 || var->yres > 511) |
| printk(KERN_ERR "%s: invalid yres %d\n", |
| info->fix.id, var->yres); |
| if (var->vsync_len > 100) |
| printk(KERN_ERR "%s: invalid vsync_len %d\n", |
| info->fix.id, var->vsync_len); |
| if (var->upper_margin > 63) |
| printk(KERN_ERR "%s: invalid upper_margin %d\n", |
| info->fix.id, var->upper_margin); |
| if (var->lower_margin > 255) |
| printk(KERN_ERR "%s: invalid lower_margin %d\n", |
| info->fix.id, var->lower_margin); |
| #endif |
| |
| LCDC_HCR = HCR_H_WIDTH(var->hsync_len) | |
| HCR_H_WAIT_1(var->left_margin) | |
| HCR_H_WAIT_2(var->right_margin); |
| |
| LCDC_VCR = VCR_V_WIDTH(var->vsync_len) | |
| VCR_V_WAIT_1(var->upper_margin) | |
| VCR_V_WAIT_2(var->lower_margin); |
| |
| LCDC_SIZE = SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres); |
| LCDC_PCR = fbi->pcr; |
| LCDC_PWMR = fbi->pwmr; |
| LCDC_LSCR1 = fbi->lscr1; |
| LCDC_DMACR = fbi->dmacr; |
| |
| return 0; |
| } |
| |
| static void imxfb_setup_gpio(struct imxfb_info *fbi) |
| { |
| int width; |
| |
| LCDC_RMCR &= ~(RMCR_LCDC_EN | RMCR_SELF_REF); |
| |
| if( fbi->pcr & PCR_TFT ) |
| width = 16; |
| else |
| width = 1 << ((fbi->pcr >> 28) & 0x3); |
| |
| switch(width) { |
| case 16: |
| imx_gpio_mode(PD30_PF_LD15); |
| imx_gpio_mode(PD29_PF_LD14); |
| imx_gpio_mode(PD28_PF_LD13); |
| imx_gpio_mode(PD27_PF_LD12); |
| imx_gpio_mode(PD26_PF_LD11); |
| imx_gpio_mode(PD25_PF_LD10); |
| imx_gpio_mode(PD24_PF_LD9); |
| imx_gpio_mode(PD23_PF_LD8); |
| case 8: |
| imx_gpio_mode(PD22_PF_LD7); |
| imx_gpio_mode(PD21_PF_LD6); |
| imx_gpio_mode(PD20_PF_LD5); |
| imx_gpio_mode(PD19_PF_LD4); |
| case 4: |
| imx_gpio_mode(PD18_PF_LD3); |
| imx_gpio_mode(PD17_PF_LD2); |
| case 2: |
| imx_gpio_mode(PD16_PF_LD1); |
| case 1: |
| imx_gpio_mode(PD15_PF_LD0); |
| } |
| |
| /* initialize GPIOs */ |
| imx_gpio_mode(PD6_PF_LSCLK); |
| imx_gpio_mode(PD10_PF_SPL_SPR); |
| imx_gpio_mode(PD11_PF_CONTRAST); |
| imx_gpio_mode(PD14_PF_FLM_VSYNC); |
| imx_gpio_mode(PD13_PF_LP_HSYNC); |
| imx_gpio_mode(PD7_PF_REV); |
| imx_gpio_mode(PD8_PF_CLS); |
| |
| #ifndef CONFIG_MACH_PIMX1 |
| /* on PiMX1 used as buffers enable signal |
| */ |
| imx_gpio_mode(PD9_PF_PS); |
| #endif |
| |
| #ifndef CONFIG_MACH_MX1FS2 |
| /* on mx1fs2 this pin is used to (de)activate the display, so we need |
| * it as a normal gpio |
| */ |
| imx_gpio_mode(PD12_PF_ACD_OE); |
| #endif |
| |
| } |
| |
| #ifdef CONFIG_PM |
| /* |
| * Power management hooks. Note that we won't be called from IRQ context, |
| * unlike the blank functions above, so we may sleep. |
| */ |
| static int imxfb_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| struct imxfb_info *fbi = platform_get_drvdata(dev); |
| pr_debug("%s\n",__FUNCTION__); |
| |
| imxfb_disable_controller(fbi); |
| return 0; |
| } |
| |
| static int imxfb_resume(struct platform_device *dev) |
| { |
| struct imxfb_info *fbi = platform_get_drvdata(dev); |
| pr_debug("%s\n",__FUNCTION__); |
| |
| imxfb_enable_controller(fbi); |
| return 0; |
| } |
| #else |
| #define imxfb_suspend NULL |
| #define imxfb_resume NULL |
| #endif |
| |
| static int __init imxfb_init_fbinfo(struct device *dev) |
| { |
| struct imxfb_mach_info *inf = dev->platform_data; |
| struct fb_info *info = dev_get_drvdata(dev); |
| struct imxfb_info *fbi = info->par; |
| |
| pr_debug("%s\n",__FUNCTION__); |
| |
| info->pseudo_palette = kmalloc( sizeof(u32) * 16, GFP_KERNEL); |
| if (!info->pseudo_palette) |
| return -ENOMEM; |
| |
| memset(fbi, 0, sizeof(struct imxfb_info)); |
| fbi->dev = dev; |
| |
| strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id)); |
| |
| info->fix.type = FB_TYPE_PACKED_PIXELS; |
| info->fix.type_aux = 0; |
| info->fix.xpanstep = 0; |
| info->fix.ypanstep = 0; |
| info->fix.ywrapstep = 0; |
| info->fix.accel = FB_ACCEL_NONE; |
| |
| info->var.nonstd = 0; |
| info->var.activate = FB_ACTIVATE_NOW; |
| info->var.height = -1; |
| info->var.width = -1; |
| info->var.accel_flags = 0; |
| info->var.vmode = FB_VMODE_NONINTERLACED; |
| |
| info->fbops = &imxfb_ops; |
| info->flags = FBINFO_FLAG_DEFAULT; |
| info->pseudo_palette = (fbi + 1); |
| |
| fbi->rgb[RGB_16] = &def_rgb_16; |
| fbi->rgb[RGB_8] = &def_rgb_8; |
| |
| fbi->max_xres = inf->xres; |
| info->var.xres = inf->xres; |
| info->var.xres_virtual = inf->xres; |
| fbi->max_yres = inf->yres; |
| info->var.yres = inf->yres; |
| info->var.yres_virtual = inf->yres; |
| fbi->max_bpp = inf->bpp; |
| info->var.bits_per_pixel = inf->bpp; |
| info->var.pixclock = inf->pixclock; |
| info->var.hsync_len = inf->hsync_len; |
| info->var.left_margin = inf->left_margin; |
| info->var.right_margin = inf->right_margin; |
| info->var.vsync_len = inf->vsync_len; |
| info->var.upper_margin = inf->upper_margin; |
| info->var.lower_margin = inf->lower_margin; |
| info->var.sync = inf->sync; |
| info->var.grayscale = inf->cmap_greyscale; |
| fbi->cmap_inverse = inf->cmap_inverse; |
| fbi->pcr = inf->pcr; |
| fbi->lscr1 = inf->lscr1; |
| fbi->dmacr = inf->dmacr; |
| fbi->pwmr = inf->pwmr; |
| fbi->lcd_power = inf->lcd_power; |
| fbi->backlight_power = inf->backlight_power; |
| info->fix.smem_len = fbi->max_xres * fbi->max_yres * |
| fbi->max_bpp / 8; |
| |
| return 0; |
| } |
| |
| /* |
| * Allocates the DRAM memory for the frame buffer. This buffer is |
| * remapped into a non-cached, non-buffered, memory region to |
| * allow pixel writes to occur without flushing the cache. |
| * Once this area is remapped, all virtual memory access to the |
| * video memory should occur at the new region. |
| */ |
| static int __init imxfb_map_video_memory(struct fb_info *info) |
| { |
| struct imxfb_info *fbi = info->par; |
| |
| fbi->map_size = PAGE_ALIGN(info->fix.smem_len); |
| fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size, |
| &fbi->map_dma,GFP_KERNEL); |
| |
| if (fbi->map_cpu) { |
| info->screen_base = fbi->map_cpu; |
| fbi->screen_cpu = fbi->map_cpu; |
| fbi->screen_dma = fbi->map_dma; |
| info->fix.smem_start = fbi->screen_dma; |
| } |
| |
| return fbi->map_cpu ? 0 : -ENOMEM; |
| } |
| |
| static int __init imxfb_probe(struct platform_device *pdev) |
| { |
| struct imxfb_info *fbi; |
| struct fb_info *info; |
| struct imxfb_mach_info *inf; |
| struct resource *res; |
| int ret; |
| |
| printk("i.MX Framebuffer driver\n"); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if(!res) |
| return -ENODEV; |
| |
| inf = pdev->dev.platform_data; |
| if(!inf) { |
| dev_err(dev,"No platform_data available\n"); |
| return -ENOMEM; |
| } |
| |
| info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev); |
| if(!info) |
| return -ENOMEM; |
| |
| fbi = info->par; |
| |
| platform_set_drvdata(pdev, info); |
| |
| ret = imxfb_init_fbinfo(&pdev->dev); |
| if( ret < 0 ) |
| goto failed_init; |
| |
| res = request_mem_region(res->start, res->end - res->start + 1, "IMXFB"); |
| if (!res) { |
| ret = -EBUSY; |
| goto failed_regs; |
| } |
| |
| if (!inf->fixed_screen_cpu) { |
| ret = imxfb_map_video_memory(info); |
| if (ret) { |
| dev_err(dev, "Failed to allocate video RAM: %d\n", ret); |
| ret = -ENOMEM; |
| goto failed_map; |
| } |
| } else { |
| /* Fixed framebuffer mapping enables location of the screen in eSRAM */ |
| fbi->map_cpu = inf->fixed_screen_cpu; |
| fbi->map_dma = inf->fixed_screen_dma; |
| info->screen_base = fbi->map_cpu; |
| fbi->screen_cpu = fbi->map_cpu; |
| fbi->screen_dma = fbi->map_dma; |
| info->fix.smem_start = fbi->screen_dma; |
| } |
| |
| /* |
| * This makes sure that our colour bitfield |
| * descriptors are correctly initialised. |
| */ |
| imxfb_check_var(&info->var, info); |
| |
| ret = fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); |
| if (ret < 0) |
| goto failed_cmap; |
| |
| imxfb_setup_gpio(fbi); |
| |
| imxfb_set_par(info); |
| ret = register_framebuffer(info); |
| if (ret < 0) { |
| dev_err(dev, "failed to register framebuffer\n"); |
| goto failed_register; |
| } |
| |
| imxfb_enable_controller(fbi); |
| |
| return 0; |
| |
| failed_register: |
| fb_dealloc_cmap(&info->cmap); |
| failed_cmap: |
| if (!inf->fixed_screen_cpu) |
| dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, |
| fbi->map_dma); |
| failed_map: |
| kfree(info->pseudo_palette); |
| failed_regs: |
| release_mem_region(res->start, res->end - res->start); |
| failed_init: |
| platform_set_drvdata(pdev, NULL); |
| framebuffer_release(info); |
| return ret; |
| } |
| |
| static int imxfb_remove(struct platform_device *pdev) |
| { |
| struct fb_info *info = platform_get_drvdata(pdev); |
| struct imxfb_info *fbi = info->par; |
| struct resource *res; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| imxfb_disable_controller(fbi); |
| |
| unregister_framebuffer(info); |
| |
| fb_dealloc_cmap(&info->cmap); |
| kfree(info->pseudo_palette); |
| framebuffer_release(info); |
| |
| release_mem_region(res->start, res->end - res->start + 1); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| void imxfb_shutdown(struct platform_device * dev) |
| { |
| struct fb_info *info = platform_get_drvdata(dev); |
| struct imxfb_info *fbi = info->par; |
| imxfb_disable_controller(fbi); |
| } |
| |
| static struct platform_driver imxfb_driver = { |
| .probe = imxfb_probe, |
| .suspend = imxfb_suspend, |
| .resume = imxfb_resume, |
| .remove = imxfb_remove, |
| .shutdown = imxfb_shutdown, |
| .driver = { |
| .name = "imx-fb", |
| }, |
| }; |
| |
| int __init imxfb_init(void) |
| { |
| return platform_driver_register(&imxfb_driver); |
| } |
| |
| static void __exit imxfb_cleanup(void) |
| { |
| platform_driver_unregister(&imxfb_driver); |
| } |
| |
| module_init(imxfb_init); |
| module_exit(imxfb_cleanup); |
| |
| MODULE_DESCRIPTION("Motorola i.MX framebuffer driver"); |
| MODULE_AUTHOR("Sascha Hauer, Pengutronix"); |
| MODULE_LICENSE("GPL"); |