| /* RxRPC recvmsg() implementation |
| * |
| * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. |
| * Written by David Howells (dhowells@redhat.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/net.h> |
| #include <linux/skbuff.h> |
| #include <linux/export.h> |
| #include <net/sock.h> |
| #include <net/af_rxrpc.h> |
| #include "ar-internal.h" |
| |
| /* |
| * Post a call for attention by the socket or kernel service. Further |
| * notifications are suppressed by putting recvmsg_link on a dummy queue. |
| */ |
| void rxrpc_notify_socket(struct rxrpc_call *call) |
| { |
| struct rxrpc_sock *rx; |
| struct sock *sk; |
| |
| _enter("%d", call->debug_id); |
| |
| if (!list_empty(&call->recvmsg_link)) |
| return; |
| |
| rcu_read_lock(); |
| |
| rx = rcu_dereference(call->socket); |
| sk = &rx->sk; |
| if (rx && sk->sk_state < RXRPC_CLOSE) { |
| if (call->notify_rx) { |
| call->notify_rx(sk, call, call->user_call_ID); |
| } else { |
| write_lock_bh(&rx->recvmsg_lock); |
| if (list_empty(&call->recvmsg_link)) { |
| rxrpc_get_call(call, rxrpc_call_got); |
| list_add_tail(&call->recvmsg_link, &rx->recvmsg_q); |
| } |
| write_unlock_bh(&rx->recvmsg_lock); |
| |
| if (!sock_flag(sk, SOCK_DEAD)) { |
| _debug("call %ps", sk->sk_data_ready); |
| sk->sk_data_ready(sk); |
| } |
| } |
| } |
| |
| rcu_read_unlock(); |
| _leave(""); |
| } |
| |
| /* |
| * Pass a call terminating message to userspace. |
| */ |
| static int rxrpc_recvmsg_term(struct rxrpc_call *call, struct msghdr *msg) |
| { |
| u32 tmp = 0; |
| int ret; |
| |
| switch (call->completion) { |
| case RXRPC_CALL_SUCCEEDED: |
| ret = 0; |
| if (rxrpc_is_service_call(call)) |
| ret = put_cmsg(msg, SOL_RXRPC, RXRPC_ACK, 0, &tmp); |
| break; |
| case RXRPC_CALL_REMOTELY_ABORTED: |
| tmp = call->abort_code; |
| ret = put_cmsg(msg, SOL_RXRPC, RXRPC_ABORT, 4, &tmp); |
| break; |
| case RXRPC_CALL_LOCALLY_ABORTED: |
| tmp = call->abort_code; |
| ret = put_cmsg(msg, SOL_RXRPC, RXRPC_ABORT, 4, &tmp); |
| break; |
| case RXRPC_CALL_NETWORK_ERROR: |
| tmp = call->error; |
| ret = put_cmsg(msg, SOL_RXRPC, RXRPC_NET_ERROR, 4, &tmp); |
| break; |
| case RXRPC_CALL_LOCAL_ERROR: |
| tmp = call->error; |
| ret = put_cmsg(msg, SOL_RXRPC, RXRPC_LOCAL_ERROR, 4, &tmp); |
| break; |
| default: |
| pr_err("Invalid terminal call state %u\n", call->state); |
| BUG(); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Pass back notification of a new call. The call is added to the |
| * to-be-accepted list. This means that the next call to be accepted might not |
| * be the last call seen awaiting acceptance, but unless we leave this on the |
| * front of the queue and block all other messages until someone gives us a |
| * user_ID for it, there's not a lot we can do. |
| */ |
| static int rxrpc_recvmsg_new_call(struct rxrpc_sock *rx, |
| struct rxrpc_call *call, |
| struct msghdr *msg, int flags) |
| { |
| int tmp = 0, ret; |
| |
| ret = put_cmsg(msg, SOL_RXRPC, RXRPC_NEW_CALL, 0, &tmp); |
| |
| if (ret == 0 && !(flags & MSG_PEEK)) { |
| _debug("to be accepted"); |
| write_lock_bh(&rx->recvmsg_lock); |
| list_del_init(&call->recvmsg_link); |
| write_unlock_bh(&rx->recvmsg_lock); |
| |
| rxrpc_get_call(call, rxrpc_call_got); |
| write_lock(&rx->call_lock); |
| list_add_tail(&call->accept_link, &rx->to_be_accepted); |
| write_unlock(&rx->call_lock); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * End the packet reception phase. |
| */ |
| static void rxrpc_end_rx_phase(struct rxrpc_call *call) |
| { |
| _enter("%d,%s", call->debug_id, rxrpc_call_states[call->state]); |
| |
| trace_rxrpc_receive(call, rxrpc_receive_end, 0, call->rx_top); |
| ASSERTCMP(call->rx_hard_ack, ==, call->rx_top); |
| |
| if (call->state == RXRPC_CALL_CLIENT_RECV_REPLY) { |
| rxrpc_propose_ACK(call, RXRPC_ACK_IDLE, 0, 0, true, false); |
| rxrpc_send_call_packet(call, RXRPC_PACKET_TYPE_ACK); |
| } else { |
| rxrpc_propose_ACK(call, RXRPC_ACK_IDLE, 0, 0, false, false); |
| } |
| |
| write_lock_bh(&call->state_lock); |
| |
| switch (call->state) { |
| case RXRPC_CALL_CLIENT_RECV_REPLY: |
| __rxrpc_call_completed(call); |
| break; |
| |
| case RXRPC_CALL_SERVER_RECV_REQUEST: |
| call->state = RXRPC_CALL_SERVER_ACK_REQUEST; |
| break; |
| default: |
| break; |
| } |
| |
| write_unlock_bh(&call->state_lock); |
| } |
| |
| /* |
| * Discard a packet we've used up and advance the Rx window by one. |
| */ |
| static void rxrpc_rotate_rx_window(struct rxrpc_call *call) |
| { |
| struct rxrpc_skb_priv *sp; |
| struct sk_buff *skb; |
| rxrpc_serial_t serial; |
| rxrpc_seq_t hard_ack, top; |
| u8 flags; |
| int ix; |
| |
| _enter("%d", call->debug_id); |
| |
| hard_ack = call->rx_hard_ack; |
| top = smp_load_acquire(&call->rx_top); |
| ASSERT(before(hard_ack, top)); |
| |
| hard_ack++; |
| ix = hard_ack & RXRPC_RXTX_BUFF_MASK; |
| skb = call->rxtx_buffer[ix]; |
| rxrpc_see_skb(skb); |
| sp = rxrpc_skb(skb); |
| flags = sp->hdr.flags; |
| serial = sp->hdr.serial; |
| if (call->rxtx_annotations[ix] & RXRPC_RX_ANNO_JUMBO) |
| serial += (call->rxtx_annotations[ix] & RXRPC_RX_ANNO_JUMBO) - 1; |
| |
| call->rxtx_buffer[ix] = NULL; |
| call->rxtx_annotations[ix] = 0; |
| /* Barrier against rxrpc_input_data(). */ |
| smp_store_release(&call->rx_hard_ack, hard_ack); |
| |
| rxrpc_free_skb(skb); |
| |
| _debug("%u,%u,%02x", hard_ack, top, flags); |
| trace_rxrpc_receive(call, rxrpc_receive_rotate, serial, hard_ack); |
| if (flags & RXRPC_LAST_PACKET) |
| rxrpc_end_rx_phase(call); |
| } |
| |
| /* |
| * Decrypt and verify a (sub)packet. The packet's length may be changed due to |
| * padding, but if this is the case, the packet length will be resident in the |
| * socket buffer. Note that we can't modify the master skb info as the skb may |
| * be the home to multiple subpackets. |
| */ |
| static int rxrpc_verify_packet(struct rxrpc_call *call, struct sk_buff *skb, |
| u8 annotation, |
| unsigned int offset, unsigned int len) |
| { |
| struct rxrpc_skb_priv *sp = rxrpc_skb(skb); |
| rxrpc_seq_t seq = sp->hdr.seq; |
| u16 cksum = sp->hdr.cksum; |
| |
| _enter(""); |
| |
| /* For all but the head jumbo subpacket, the security checksum is in a |
| * jumbo header immediately prior to the data. |
| */ |
| if ((annotation & RXRPC_RX_ANNO_JUMBO) > 1) { |
| __be16 tmp; |
| if (skb_copy_bits(skb, offset - 2, &tmp, 2) < 0) |
| BUG(); |
| cksum = ntohs(tmp); |
| seq += (annotation & RXRPC_RX_ANNO_JUMBO) - 1; |
| } |
| |
| return call->conn->security->verify_packet(call, skb, offset, len, |
| seq, cksum); |
| } |
| |
| /* |
| * Locate the data within a packet. This is complicated by: |
| * |
| * (1) An skb may contain a jumbo packet - so we have to find the appropriate |
| * subpacket. |
| * |
| * (2) The (sub)packets may be encrypted and, if so, the encrypted portion |
| * contains an extra header which includes the true length of the data, |
| * excluding any encrypted padding. |
| */ |
| static int rxrpc_locate_data(struct rxrpc_call *call, struct sk_buff *skb, |
| u8 *_annotation, |
| unsigned int *_offset, unsigned int *_len) |
| { |
| struct rxrpc_skb_priv *sp = rxrpc_skb(skb); |
| unsigned int offset = *_offset; |
| unsigned int len = *_len; |
| int ret; |
| u8 annotation = *_annotation; |
| |
| /* Locate the subpacket */ |
| offset = sp->offset; |
| len = skb->len - sp->offset; |
| if ((annotation & RXRPC_RX_ANNO_JUMBO) > 0) { |
| offset += (((annotation & RXRPC_RX_ANNO_JUMBO) - 1) * |
| RXRPC_JUMBO_SUBPKTLEN); |
| len = (annotation & RXRPC_RX_ANNO_JLAST) ? |
| skb->len - offset : RXRPC_JUMBO_SUBPKTLEN; |
| } |
| |
| if (!(annotation & RXRPC_RX_ANNO_VERIFIED)) { |
| ret = rxrpc_verify_packet(call, skb, annotation, offset, len); |
| if (ret < 0) |
| return ret; |
| *_annotation |= RXRPC_RX_ANNO_VERIFIED; |
| } |
| |
| *_offset = offset; |
| *_len = len; |
| call->conn->security->locate_data(call, skb, _offset, _len); |
| return 0; |
| } |
| |
| /* |
| * Deliver messages to a call. This keeps processing packets until the buffer |
| * is filled and we find either more DATA (returns 0) or the end of the DATA |
| * (returns 1). If more packets are required, it returns -EAGAIN. |
| */ |
| static int rxrpc_recvmsg_data(struct socket *sock, struct rxrpc_call *call, |
| struct msghdr *msg, struct iov_iter *iter, |
| size_t len, int flags, size_t *_offset) |
| { |
| struct rxrpc_skb_priv *sp; |
| struct sk_buff *skb; |
| rxrpc_seq_t hard_ack, top, seq; |
| size_t remain; |
| bool last; |
| unsigned int rx_pkt_offset, rx_pkt_len; |
| int ix, copy, ret = -EAGAIN, ret2; |
| |
| _enter(""); |
| |
| rx_pkt_offset = call->rx_pkt_offset; |
| rx_pkt_len = call->rx_pkt_len; |
| |
| if (call->state >= RXRPC_CALL_SERVER_ACK_REQUEST) { |
| seq = call->rx_hard_ack; |
| ret = 1; |
| goto done; |
| } |
| |
| /* Barriers against rxrpc_input_data(). */ |
| hard_ack = call->rx_hard_ack; |
| top = smp_load_acquire(&call->rx_top); |
| for (seq = hard_ack + 1; before_eq(seq, top); seq++) { |
| ix = seq & RXRPC_RXTX_BUFF_MASK; |
| skb = call->rxtx_buffer[ix]; |
| if (!skb) |
| break; |
| smp_rmb(); |
| rxrpc_see_skb(skb); |
| sp = rxrpc_skb(skb); |
| |
| if (!(flags & MSG_PEEK)) |
| trace_rxrpc_receive(call, rxrpc_receive_front, |
| sp->hdr.serial, seq); |
| |
| if (msg) |
| sock_recv_timestamp(msg, sock->sk, skb); |
| |
| if (rx_pkt_offset == 0) { |
| ret2 = rxrpc_locate_data(call, skb, |
| &call->rxtx_annotations[ix], |
| &rx_pkt_offset, &rx_pkt_len); |
| if (ret2 < 0) { |
| ret = ret2; |
| goto out; |
| } |
| } |
| _debug("recvmsg %x DATA #%u { %d, %d }", |
| sp->hdr.callNumber, seq, rx_pkt_offset, rx_pkt_len); |
| |
| /* We have to handle short, empty and used-up DATA packets. */ |
| remain = len - *_offset; |
| copy = rx_pkt_len; |
| if (copy > remain) |
| copy = remain; |
| if (copy > 0) { |
| ret2 = skb_copy_datagram_iter(skb, rx_pkt_offset, iter, |
| copy); |
| if (ret2 < 0) { |
| ret = ret2; |
| goto out; |
| } |
| |
| /* handle piecemeal consumption of data packets */ |
| _debug("copied %d @%zu", copy, *_offset); |
| |
| rx_pkt_offset += copy; |
| rx_pkt_len -= copy; |
| *_offset += copy; |
| } |
| |
| if (rx_pkt_len > 0) { |
| _debug("buffer full"); |
| ASSERTCMP(*_offset, ==, len); |
| ret = 0; |
| break; |
| } |
| |
| /* The whole packet has been transferred. */ |
| last = sp->hdr.flags & RXRPC_LAST_PACKET; |
| if (!(flags & MSG_PEEK)) |
| rxrpc_rotate_rx_window(call); |
| rx_pkt_offset = 0; |
| rx_pkt_len = 0; |
| |
| if (last) { |
| ASSERTCMP(seq, ==, READ_ONCE(call->rx_top)); |
| ret = 1; |
| goto out; |
| } |
| } |
| |
| out: |
| if (!(flags & MSG_PEEK)) { |
| call->rx_pkt_offset = rx_pkt_offset; |
| call->rx_pkt_len = rx_pkt_len; |
| } |
| done: |
| _leave(" = %d [%u/%u]", ret, seq, top); |
| return ret; |
| } |
| |
| /* |
| * Receive a message from an RxRPC socket |
| * - we need to be careful about two or more threads calling recvmsg |
| * simultaneously |
| */ |
| int rxrpc_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, |
| int flags) |
| { |
| struct rxrpc_call *call; |
| struct rxrpc_sock *rx = rxrpc_sk(sock->sk); |
| struct list_head *l; |
| size_t copied = 0; |
| long timeo; |
| int ret; |
| |
| DEFINE_WAIT(wait); |
| |
| _enter(",,,%zu,%d", len, flags); |
| |
| if (flags & (MSG_OOB | MSG_TRUNC)) |
| return -EOPNOTSUPP; |
| |
| timeo = sock_rcvtimeo(&rx->sk, flags & MSG_DONTWAIT); |
| |
| try_again: |
| lock_sock(&rx->sk); |
| |
| /* Return immediately if a client socket has no outstanding calls */ |
| if (RB_EMPTY_ROOT(&rx->calls) && |
| list_empty(&rx->recvmsg_q) && |
| rx->sk.sk_state != RXRPC_SERVER_LISTENING) { |
| release_sock(&rx->sk); |
| return -ENODATA; |
| } |
| |
| if (list_empty(&rx->recvmsg_q)) { |
| ret = -EWOULDBLOCK; |
| if (timeo == 0) |
| goto error_no_call; |
| |
| release_sock(&rx->sk); |
| |
| /* Wait for something to happen */ |
| prepare_to_wait_exclusive(sk_sleep(&rx->sk), &wait, |
| TASK_INTERRUPTIBLE); |
| ret = sock_error(&rx->sk); |
| if (ret) |
| goto wait_error; |
| |
| if (list_empty(&rx->recvmsg_q)) { |
| if (signal_pending(current)) |
| goto wait_interrupted; |
| timeo = schedule_timeout(timeo); |
| } |
| finish_wait(sk_sleep(&rx->sk), &wait); |
| goto try_again; |
| } |
| |
| /* Find the next call and dequeue it if we're not just peeking. If we |
| * do dequeue it, that comes with a ref that we will need to release. |
| */ |
| write_lock_bh(&rx->recvmsg_lock); |
| l = rx->recvmsg_q.next; |
| call = list_entry(l, struct rxrpc_call, recvmsg_link); |
| if (!(flags & MSG_PEEK)) |
| list_del_init(&call->recvmsg_link); |
| else |
| rxrpc_get_call(call, rxrpc_call_got); |
| write_unlock_bh(&rx->recvmsg_lock); |
| |
| _debug("recvmsg call %p", call); |
| |
| if (test_bit(RXRPC_CALL_RELEASED, &call->flags)) |
| BUG(); |
| |
| if (test_bit(RXRPC_CALL_HAS_USERID, &call->flags)) { |
| if (flags & MSG_CMSG_COMPAT) { |
| unsigned int id32 = call->user_call_ID; |
| |
| ret = put_cmsg(msg, SOL_RXRPC, RXRPC_USER_CALL_ID, |
| sizeof(unsigned int), &id32); |
| } else { |
| ret = put_cmsg(msg, SOL_RXRPC, RXRPC_USER_CALL_ID, |
| sizeof(unsigned long), |
| &call->user_call_ID); |
| } |
| if (ret < 0) |
| goto error; |
| } |
| |
| if (msg->msg_name) { |
| size_t len = sizeof(call->conn->params.peer->srx); |
| memcpy(msg->msg_name, &call->conn->params.peer->srx, len); |
| msg->msg_namelen = len; |
| } |
| |
| switch (call->state) { |
| case RXRPC_CALL_SERVER_ACCEPTING: |
| ret = rxrpc_recvmsg_new_call(rx, call, msg, flags); |
| break; |
| case RXRPC_CALL_CLIENT_RECV_REPLY: |
| case RXRPC_CALL_SERVER_RECV_REQUEST: |
| case RXRPC_CALL_SERVER_ACK_REQUEST: |
| ret = rxrpc_recvmsg_data(sock, call, msg, &msg->msg_iter, len, |
| flags, &copied); |
| if (ret == -EAGAIN) |
| ret = 0; |
| |
| if (after(call->rx_top, call->rx_hard_ack) && |
| call->rxtx_buffer[(call->rx_hard_ack + 1) & RXRPC_RXTX_BUFF_MASK]) |
| rxrpc_notify_socket(call); |
| break; |
| default: |
| ret = 0; |
| break; |
| } |
| |
| if (ret < 0) |
| goto error; |
| |
| if (call->state == RXRPC_CALL_COMPLETE) { |
| ret = rxrpc_recvmsg_term(call, msg); |
| if (ret < 0) |
| goto error; |
| if (!(flags & MSG_PEEK)) |
| rxrpc_release_call(rx, call); |
| msg->msg_flags |= MSG_EOR; |
| ret = 1; |
| } |
| |
| if (ret == 0) |
| msg->msg_flags |= MSG_MORE; |
| else |
| msg->msg_flags &= ~MSG_MORE; |
| ret = copied; |
| |
| error: |
| rxrpc_put_call(call, rxrpc_call_put); |
| error_no_call: |
| release_sock(&rx->sk); |
| _leave(" = %d", ret); |
| return ret; |
| |
| wait_interrupted: |
| ret = sock_intr_errno(timeo); |
| wait_error: |
| finish_wait(sk_sleep(&rx->sk), &wait); |
| release_sock(&rx->sk); |
| _leave(" = %d [wait]", ret); |
| return ret; |
| } |
| |
| /** |
| * rxrpc_kernel_recv_data - Allow a kernel service to receive data/info |
| * @sock: The socket that the call exists on |
| * @call: The call to send data through |
| * @buf: The buffer to receive into |
| * @size: The size of the buffer, including data already read |
| * @_offset: The running offset into the buffer. |
| * @want_more: True if more data is expected to be read |
| * @_abort: Where the abort code is stored if -ECONNABORTED is returned |
| * |
| * Allow a kernel service to receive data and pick up information about the |
| * state of a call. Returns 0 if got what was asked for and there's more |
| * available, 1 if we got what was asked for and we're at the end of the data |
| * and -EAGAIN if we need more data. |
| * |
| * Note that we may return -EAGAIN to drain empty packets at the end of the |
| * data, even if we've already copied over the requested data. |
| * |
| * This function adds the amount it transfers to *_offset, so this should be |
| * precleared as appropriate. Note that the amount remaining in the buffer is |
| * taken to be size - *_offset. |
| * |
| * *_abort should also be initialised to 0. |
| */ |
| int rxrpc_kernel_recv_data(struct socket *sock, struct rxrpc_call *call, |
| void *buf, size_t size, size_t *_offset, |
| bool want_more, u32 *_abort) |
| { |
| struct iov_iter iter; |
| struct kvec iov; |
| int ret; |
| |
| _enter("{%d,%s},%zu/%zu,%d", |
| call->debug_id, rxrpc_call_states[call->state], |
| *_offset, size, want_more); |
| |
| ASSERTCMP(*_offset, <=, size); |
| ASSERTCMP(call->state, !=, RXRPC_CALL_SERVER_ACCEPTING); |
| |
| iov.iov_base = buf + *_offset; |
| iov.iov_len = size - *_offset; |
| iov_iter_kvec(&iter, ITER_KVEC | READ, &iov, 1, size - *_offset); |
| |
| lock_sock(sock->sk); |
| |
| switch (call->state) { |
| case RXRPC_CALL_CLIENT_RECV_REPLY: |
| case RXRPC_CALL_SERVER_RECV_REQUEST: |
| case RXRPC_CALL_SERVER_ACK_REQUEST: |
| ret = rxrpc_recvmsg_data(sock, call, NULL, &iter, size, 0, |
| _offset); |
| if (ret < 0) |
| goto out; |
| |
| /* We can only reach here with a partially full buffer if we |
| * have reached the end of the data. We must otherwise have a |
| * full buffer or have been given -EAGAIN. |
| */ |
| if (ret == 1) { |
| if (*_offset < size) |
| goto short_data; |
| if (!want_more) |
| goto read_phase_complete; |
| ret = 0; |
| goto out; |
| } |
| |
| if (!want_more) |
| goto excess_data; |
| goto out; |
| |
| case RXRPC_CALL_COMPLETE: |
| goto call_complete; |
| |
| default: |
| ret = -EINPROGRESS; |
| goto out; |
| } |
| |
| read_phase_complete: |
| ret = 1; |
| out: |
| release_sock(sock->sk); |
| _leave(" = %d [%zu,%d]", ret, *_offset, *_abort); |
| return ret; |
| |
| short_data: |
| ret = -EBADMSG; |
| goto out; |
| excess_data: |
| ret = -EMSGSIZE; |
| goto out; |
| call_complete: |
| *_abort = call->abort_code; |
| ret = call->error; |
| if (call->completion == RXRPC_CALL_SUCCEEDED) { |
| ret = 1; |
| if (size > 0) |
| ret = -ECONNRESET; |
| } |
| goto out; |
| } |
| EXPORT_SYMBOL(rxrpc_kernel_recv_data); |