| /** |
| * eCryptfs: Linux filesystem encryption layer |
| * |
| * Copyright (C) 2007 International Business Machines Corp. |
| * Author(s): Michael A. Halcrow <mahalcro@us.ibm.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| * 02111-1307, USA. |
| */ |
| |
| #include <linux/fs.h> |
| #include <linux/pagemap.h> |
| #include "ecryptfs_kernel.h" |
| |
| /** |
| * ecryptfs_write_lower |
| * @ecryptfs_inode: The eCryptfs inode |
| * @data: Data to write |
| * @offset: Byte offset in the lower file to which to write the data |
| * @size: Number of bytes from @data to write at @offset in the lower |
| * file |
| * |
| * Write data to the lower file. |
| * |
| * Returns bytes written on success; less than zero on error |
| */ |
| int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data, |
| loff_t offset, size_t size) |
| { |
| struct file *lower_file; |
| mm_segment_t fs_save; |
| ssize_t rc; |
| |
| lower_file = ecryptfs_inode_to_private(ecryptfs_inode)->lower_file; |
| if (!lower_file) |
| return -EIO; |
| fs_save = get_fs(); |
| set_fs(get_ds()); |
| rc = vfs_write(lower_file, data, size, &offset); |
| set_fs(fs_save); |
| mark_inode_dirty_sync(ecryptfs_inode); |
| return rc; |
| } |
| |
| /** |
| * ecryptfs_write_lower_page_segment |
| * @ecryptfs_inode: The eCryptfs inode |
| * @page_for_lower: The page containing the data to be written to the |
| * lower file |
| * @offset_in_page: The offset in the @page_for_lower from which to |
| * start writing the data |
| * @size: The amount of data from @page_for_lower to write to the |
| * lower file |
| * |
| * Determines the byte offset in the file for the given page and |
| * offset within the page, maps the page, and makes the call to write |
| * the contents of @page_for_lower to the lower inode. |
| * |
| * Returns zero on success; non-zero otherwise |
| */ |
| int ecryptfs_write_lower_page_segment(struct inode *ecryptfs_inode, |
| struct page *page_for_lower, |
| size_t offset_in_page, size_t size) |
| { |
| char *virt; |
| loff_t offset; |
| int rc; |
| |
| offset = ((((loff_t)page_for_lower->index) << PAGE_CACHE_SHIFT) |
| + offset_in_page); |
| virt = kmap(page_for_lower); |
| rc = ecryptfs_write_lower(ecryptfs_inode, virt, offset, size); |
| if (rc > 0) |
| rc = 0; |
| kunmap(page_for_lower); |
| return rc; |
| } |
| |
| /** |
| * ecryptfs_write |
| * @ecryptfs_inode: The eCryptfs file into which to write |
| * @data: Virtual address where data to write is located |
| * @offset: Offset in the eCryptfs file at which to begin writing the |
| * data from @data |
| * @size: The number of bytes to write from @data |
| * |
| * Write an arbitrary amount of data to an arbitrary location in the |
| * eCryptfs inode page cache. This is done on a page-by-page, and then |
| * by an extent-by-extent, basis; individual extents are encrypted and |
| * written to the lower page cache (via VFS writes). This function |
| * takes care of all the address translation to locations in the lower |
| * filesystem; it also handles truncate events, writing out zeros |
| * where necessary. |
| * |
| * Returns zero on success; non-zero otherwise |
| */ |
| int ecryptfs_write(struct inode *ecryptfs_inode, char *data, loff_t offset, |
| size_t size) |
| { |
| struct page *ecryptfs_page; |
| struct ecryptfs_crypt_stat *crypt_stat; |
| char *ecryptfs_page_virt; |
| loff_t ecryptfs_file_size = i_size_read(ecryptfs_inode); |
| loff_t data_offset = 0; |
| loff_t pos; |
| int rc = 0; |
| |
| crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; |
| /* |
| * if we are writing beyond current size, then start pos |
| * at the current size - we'll fill in zeros from there. |
| */ |
| if (offset > ecryptfs_file_size) |
| pos = ecryptfs_file_size; |
| else |
| pos = offset; |
| while (pos < (offset + size)) { |
| pgoff_t ecryptfs_page_idx = (pos >> PAGE_CACHE_SHIFT); |
| size_t start_offset_in_page = (pos & ~PAGE_CACHE_MASK); |
| size_t num_bytes = (PAGE_CACHE_SIZE - start_offset_in_page); |
| loff_t total_remaining_bytes = ((offset + size) - pos); |
| |
| if (fatal_signal_pending(current)) { |
| rc = -EINTR; |
| break; |
| } |
| |
| if (num_bytes > total_remaining_bytes) |
| num_bytes = total_remaining_bytes; |
| if (pos < offset) { |
| /* remaining zeros to write, up to destination offset */ |
| loff_t total_remaining_zeros = (offset - pos); |
| |
| if (num_bytes > total_remaining_zeros) |
| num_bytes = total_remaining_zeros; |
| } |
| ecryptfs_page = ecryptfs_get_locked_page(ecryptfs_inode, |
| ecryptfs_page_idx); |
| if (IS_ERR(ecryptfs_page)) { |
| rc = PTR_ERR(ecryptfs_page); |
| printk(KERN_ERR "%s: Error getting page at " |
| "index [%ld] from eCryptfs inode " |
| "mapping; rc = [%d]\n", __func__, |
| ecryptfs_page_idx, rc); |
| goto out; |
| } |
| ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0); |
| |
| /* |
| * pos: where we're now writing, offset: where the request was |
| * If current pos is before request, we are filling zeros |
| * If we are at or beyond request, we are writing the *data* |
| * If we're in a fresh page beyond eof, zero it in either case |
| */ |
| if (pos < offset || !start_offset_in_page) { |
| /* We are extending past the previous end of the file. |
| * Fill in zero values to the end of the page */ |
| memset(((char *)ecryptfs_page_virt |
| + start_offset_in_page), 0, |
| PAGE_CACHE_SIZE - start_offset_in_page); |
| } |
| |
| /* pos >= offset, we are now writing the data request */ |
| if (pos >= offset) { |
| memcpy(((char *)ecryptfs_page_virt |
| + start_offset_in_page), |
| (data + data_offset), num_bytes); |
| data_offset += num_bytes; |
| } |
| kunmap_atomic(ecryptfs_page_virt, KM_USER0); |
| flush_dcache_page(ecryptfs_page); |
| SetPageUptodate(ecryptfs_page); |
| unlock_page(ecryptfs_page); |
| if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) |
| rc = ecryptfs_encrypt_page(ecryptfs_page); |
| else |
| rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, |
| ecryptfs_page, |
| start_offset_in_page, |
| data_offset); |
| page_cache_release(ecryptfs_page); |
| if (rc) { |
| printk(KERN_ERR "%s: Error encrypting " |
| "page; rc = [%d]\n", __func__, rc); |
| goto out; |
| } |
| pos += num_bytes; |
| } |
| if (pos > ecryptfs_file_size) { |
| i_size_write(ecryptfs_inode, pos); |
| if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) { |
| int rc2; |
| |
| rc2 = ecryptfs_write_inode_size_to_metadata( |
| ecryptfs_inode); |
| if (rc2) { |
| printk(KERN_ERR "Problem with " |
| "ecryptfs_write_inode_size_to_metadata; " |
| "rc = [%d]\n", rc2); |
| if (!rc) |
| rc = rc2; |
| goto out; |
| } |
| } |
| } |
| out: |
| return rc; |
| } |
| |
| /** |
| * ecryptfs_read_lower |
| * @data: The read data is stored here by this function |
| * @offset: Byte offset in the lower file from which to read the data |
| * @size: Number of bytes to read from @offset of the lower file and |
| * store into @data |
| * @ecryptfs_inode: The eCryptfs inode |
| * |
| * Read @size bytes of data at byte offset @offset from the lower |
| * inode into memory location @data. |
| * |
| * Returns bytes read on success; 0 on EOF; less than zero on error |
| */ |
| int ecryptfs_read_lower(char *data, loff_t offset, size_t size, |
| struct inode *ecryptfs_inode) |
| { |
| struct file *lower_file; |
| mm_segment_t fs_save; |
| ssize_t rc; |
| |
| lower_file = ecryptfs_inode_to_private(ecryptfs_inode)->lower_file; |
| if (!lower_file) |
| return -EIO; |
| fs_save = get_fs(); |
| set_fs(get_ds()); |
| rc = vfs_read(lower_file, data, size, &offset); |
| set_fs(fs_save); |
| return rc; |
| } |
| |
| /** |
| * ecryptfs_read_lower_page_segment |
| * @page_for_ecryptfs: The page into which data for eCryptfs will be |
| * written |
| * @offset_in_page: Offset in @page_for_ecryptfs from which to start |
| * writing |
| * @size: The number of bytes to write into @page_for_ecryptfs |
| * @ecryptfs_inode: The eCryptfs inode |
| * |
| * Determines the byte offset in the file for the given page and |
| * offset within the page, maps the page, and makes the call to read |
| * the contents of @page_for_ecryptfs from the lower inode. |
| * |
| * Returns zero on success; non-zero otherwise |
| */ |
| int ecryptfs_read_lower_page_segment(struct page *page_for_ecryptfs, |
| pgoff_t page_index, |
| size_t offset_in_page, size_t size, |
| struct inode *ecryptfs_inode) |
| { |
| char *virt; |
| loff_t offset; |
| int rc; |
| |
| offset = ((((loff_t)page_index) << PAGE_CACHE_SHIFT) + offset_in_page); |
| virt = kmap(page_for_ecryptfs); |
| rc = ecryptfs_read_lower(virt, offset, size, ecryptfs_inode); |
| if (rc > 0) |
| rc = 0; |
| kunmap(page_for_ecryptfs); |
| flush_dcache_page(page_for_ecryptfs); |
| return rc; |
| } |