| /****************************************************************************** |
| * touchkitusb.c -- Driver for eGalax TouchKit USB Touchscreens |
| * |
| * Copyright (C) 2004 by Daniel Ritz |
| * Copyright (C) by Todd E. Johnson (mtouchusb.c) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Based upon mtouchusb.c |
| * |
| *****************************************************************************/ |
| |
| //#define DEBUG |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| |
| #if !defined(DEBUG) && defined(CONFIG_USB_DEBUG) |
| #define DEBUG |
| #endif |
| #include <linux/usb.h> |
| #include <linux/usb_input.h> |
| |
| #define TOUCHKIT_MIN_XC 0x0 |
| #define TOUCHKIT_MAX_XC 0x07ff |
| #define TOUCHKIT_XC_FUZZ 0x0 |
| #define TOUCHKIT_XC_FLAT 0x0 |
| #define TOUCHKIT_MIN_YC 0x0 |
| #define TOUCHKIT_MAX_YC 0x07ff |
| #define TOUCHKIT_YC_FUZZ 0x0 |
| #define TOUCHKIT_YC_FLAT 0x0 |
| #define TOUCHKIT_REPORT_DATA_SIZE 8 |
| |
| #define TOUCHKIT_DOWN 0x01 |
| #define TOUCHKIT_POINT_TOUCH 0x81 |
| #define TOUCHKIT_POINT_NOTOUCH 0x80 |
| |
| #define TOUCHKIT_GET_TOUCHED(dat) ((((dat)[0]) & TOUCHKIT_DOWN) ? 1 : 0) |
| #define TOUCHKIT_GET_X(dat) (((dat)[3] << 7) | (dat)[4]) |
| #define TOUCHKIT_GET_Y(dat) (((dat)[1] << 7) | (dat)[2]) |
| |
| #define DRIVER_VERSION "v0.1" |
| #define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>" |
| #define DRIVER_DESC "eGalax TouchKit USB HID Touchscreen Driver" |
| |
| static int swap_xy; |
| module_param(swap_xy, bool, 0644); |
| MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); |
| |
| struct touchkit_usb { |
| unsigned char *data; |
| dma_addr_t data_dma; |
| struct urb *irq; |
| struct usb_device *udev; |
| struct input_dev *input; |
| char name[128]; |
| char phys[64]; |
| }; |
| |
| static struct usb_device_id touchkit_devices[] = { |
| {USB_DEVICE(0x3823, 0x0001)}, |
| {USB_DEVICE(0x0123, 0x0001)}, |
| {USB_DEVICE(0x0eef, 0x0001)}, |
| {USB_DEVICE(0x0eef, 0x0002)}, |
| {} |
| }; |
| |
| static void touchkit_irq(struct urb *urb, struct pt_regs *regs) |
| { |
| struct touchkit_usb *touchkit = urb->context; |
| int retval; |
| int x, y; |
| |
| switch (urb->status) { |
| case 0: |
| /* success */ |
| break; |
| case -ETIMEDOUT: |
| /* this urb is timing out */ |
| dbg("%s - urb timed out - was the device unplugged?", |
| __FUNCTION__); |
| return; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| /* this urb is terminated, clean up */ |
| dbg("%s - urb shutting down with status: %d", |
| __FUNCTION__, urb->status); |
| return; |
| default: |
| dbg("%s - nonzero urb status received: %d", |
| __FUNCTION__, urb->status); |
| goto exit; |
| } |
| |
| if (swap_xy) { |
| y = TOUCHKIT_GET_X(touchkit->data); |
| x = TOUCHKIT_GET_Y(touchkit->data); |
| } else { |
| x = TOUCHKIT_GET_X(touchkit->data); |
| y = TOUCHKIT_GET_Y(touchkit->data); |
| } |
| |
| input_regs(touchkit->input, regs); |
| input_report_key(touchkit->input, BTN_TOUCH, |
| TOUCHKIT_GET_TOUCHED(touchkit->data)); |
| input_report_abs(touchkit->input, ABS_X, x); |
| input_report_abs(touchkit->input, ABS_Y, y); |
| input_sync(touchkit->input); |
| |
| exit: |
| retval = usb_submit_urb(urb, GFP_ATOMIC); |
| if (retval) |
| err("%s - usb_submit_urb failed with result: %d", |
| __FUNCTION__, retval); |
| } |
| |
| static int touchkit_open(struct input_dev *input) |
| { |
| struct touchkit_usb *touchkit = input->private; |
| |
| touchkit->irq->dev = touchkit->udev; |
| |
| if (usb_submit_urb(touchkit->irq, GFP_ATOMIC)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static void touchkit_close(struct input_dev *input) |
| { |
| struct touchkit_usb *touchkit = input->private; |
| |
| usb_kill_urb(touchkit->irq); |
| } |
| |
| static int touchkit_alloc_buffers(struct usb_device *udev, |
| struct touchkit_usb *touchkit) |
| { |
| touchkit->data = usb_buffer_alloc(udev, TOUCHKIT_REPORT_DATA_SIZE, |
| SLAB_ATOMIC, &touchkit->data_dma); |
| |
| if (!touchkit->data) |
| return -1; |
| |
| return 0; |
| } |
| |
| static void touchkit_free_buffers(struct usb_device *udev, |
| struct touchkit_usb *touchkit) |
| { |
| if (touchkit->data) |
| usb_buffer_free(udev, TOUCHKIT_REPORT_DATA_SIZE, |
| touchkit->data, touchkit->data_dma); |
| } |
| |
| static int touchkit_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct touchkit_usb *touchkit; |
| struct input_dev *input_dev; |
| struct usb_host_interface *interface; |
| struct usb_endpoint_descriptor *endpoint; |
| struct usb_device *udev = interface_to_usbdev(intf); |
| |
| interface = intf->cur_altsetting; |
| endpoint = &interface->endpoint[0].desc; |
| |
| touchkit = kzalloc(sizeof(struct touchkit_usb), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!touchkit || !input_dev) |
| goto out_free; |
| |
| if (touchkit_alloc_buffers(udev, touchkit)) |
| goto out_free; |
| |
| touchkit->irq = usb_alloc_urb(0, GFP_KERNEL); |
| if (!touchkit->irq) { |
| dbg("%s - usb_alloc_urb failed: touchkit->irq", __FUNCTION__); |
| goto out_free_buffers; |
| } |
| |
| touchkit->udev = udev; |
| touchkit->input = input_dev; |
| |
| if (udev->manufacturer) |
| strlcpy(touchkit->name, udev->manufacturer, sizeof(touchkit->name)); |
| |
| if (udev->product) { |
| if (udev->manufacturer) |
| strlcat(touchkit->name, " ", sizeof(touchkit->name)); |
| strlcat(touchkit->name, udev->product, sizeof(touchkit->name)); |
| } |
| |
| if (!strlen(touchkit->name)) |
| snprintf(touchkit->name, sizeof(touchkit->name), |
| "USB Touchscreen %04x:%04x", |
| le16_to_cpu(udev->descriptor.idVendor), |
| le16_to_cpu(udev->descriptor.idProduct)); |
| |
| usb_make_path(udev, touchkit->phys, sizeof(touchkit->phys)); |
| strlcpy(touchkit->phys, "/input0", sizeof(touchkit->phys)); |
| |
| input_dev->name = touchkit->name; |
| input_dev->phys = touchkit->phys; |
| usb_to_input_id(udev, &input_dev->id); |
| input_dev->cdev.dev = &intf->dev; |
| input_dev->private = touchkit; |
| input_dev->open = touchkit_open; |
| input_dev->close = touchkit_close; |
| |
| input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); |
| input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); |
| input_set_abs_params(input_dev, ABS_X, TOUCHKIT_MIN_XC, TOUCHKIT_MAX_XC, |
| TOUCHKIT_XC_FUZZ, TOUCHKIT_XC_FLAT); |
| input_set_abs_params(input_dev, ABS_Y, TOUCHKIT_MIN_YC, TOUCHKIT_MAX_YC, |
| TOUCHKIT_YC_FUZZ, TOUCHKIT_YC_FLAT); |
| |
| usb_fill_int_urb(touchkit->irq, touchkit->udev, |
| usb_rcvintpipe(touchkit->udev, 0x81), |
| touchkit->data, TOUCHKIT_REPORT_DATA_SIZE, |
| touchkit_irq, touchkit, endpoint->bInterval); |
| |
| input_register_device(touchkit->input); |
| |
| usb_set_intfdata(intf, touchkit); |
| return 0; |
| |
| out_free_buffers: |
| touchkit_free_buffers(udev, touchkit); |
| out_free: |
| input_free_device(input_dev); |
| kfree(touchkit); |
| return -ENOMEM; |
| } |
| |
| static void touchkit_disconnect(struct usb_interface *intf) |
| { |
| struct touchkit_usb *touchkit = usb_get_intfdata(intf); |
| |
| dbg("%s - called", __FUNCTION__); |
| |
| if (!touchkit) |
| return; |
| |
| dbg("%s - touchkit is initialized, cleaning up", __FUNCTION__); |
| usb_set_intfdata(intf, NULL); |
| usb_kill_urb(touchkit->irq); |
| input_unregister_device(touchkit->input); |
| usb_free_urb(touchkit->irq); |
| touchkit_free_buffers(interface_to_usbdev(intf), touchkit); |
| kfree(touchkit); |
| } |
| |
| MODULE_DEVICE_TABLE(usb, touchkit_devices); |
| |
| static struct usb_driver touchkit_driver = { |
| .owner = THIS_MODULE, |
| .name = "touchkitusb", |
| .probe = touchkit_probe, |
| .disconnect = touchkit_disconnect, |
| .id_table = touchkit_devices, |
| }; |
| |
| static int __init touchkit_init(void) |
| { |
| return usb_register(&touchkit_driver); |
| } |
| |
| static void __exit touchkit_cleanup(void) |
| { |
| usb_deregister(&touchkit_driver); |
| } |
| |
| module_init(touchkit_init); |
| module_exit(touchkit_cleanup); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |