blob: 3eec6274e413ca1da41498a4fb514c2b6a0392a3 [file] [log] [blame]
/******************************************************************************
*
* Name: skgesirq.h
* Project: Gigabit Ethernet Adapters, Common Modules
* Version: $Revision: 1.30 $
* Date: $Date: 2003/07/04 12:34:13 $
* Purpose: SK specific Gigabit Ethernet special IRQ functions
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2002 SysKonnect.
* (C)Copyright 2002-2003 Marvell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
#ifndef _INC_SKGESIRQ_H_
#define _INC_SKGESIRQ_H_
/* Define return codes of SkGePortCheckUp and CheckShort */
#define SK_HW_PS_NONE 0 /* No action needed */
#define SK_HW_PS_RESTART 1 /* Restart needed */
#define SK_HW_PS_LINK 2 /* Link Up actions needed */
/*
* Define the Event the special IRQ/INI module can handle
*/
#define SK_HWEV_WATIM 1 /* Timeout for WA Errata #2 XMAC */
#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */
#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */
#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */
#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */
#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */
#define SK_HWEV_SET_FLOWMODE 7 /* Set Flow Control Mode by PNMI */
#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */
#define SK_HWEV_SET_SPEED 9 /* Set Link Speed by PNMI */
#define SK_HWEV_HALFDUP_CHK 10 /* Half Duplex Hangup Workaround */
#define SK_WA_ACT_TIME (5000000UL) /* 5 sec */
#define SK_WA_INA_TIME (100000UL) /* 100 msec */
#define SK_HALFDUP_CHK_TIME (10000UL) /* 10 msec */
/*
* Define the error numbers and messages
*/
#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0)
#define SKERR_SIRQ_E001MSG "Unknown event"
#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1)
#define SKERR_SIRQ_E002MSG "Packet timeout RX1"
#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1)
#define SKERR_SIRQ_E003MSG "Packet timeout RX2"
#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1)
#define SKERR_SIRQ_E004MSG "MAC 1 not correctly initialized"
#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1)
#define SKERR_SIRQ_E005MSG "MAC 2 not correctly initialized"
#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1)
#define SKERR_SIRQ_E006MSG "CHECK failure R1"
#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1)
#define SKERR_SIRQ_E007MSG "CHECK failure R2"
#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1)
#define SKERR_SIRQ_E008MSG "CHECK failure XS1"
#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1)
#define SKERR_SIRQ_E009MSG "CHECK failure XA1"
#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1)
#define SKERR_SIRQ_E010MSG "CHECK failure XS2"
#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1)
#define SKERR_SIRQ_E011MSG "CHECK failure XA2"
#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1)
#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error"
#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1)
#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error"
#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1)
#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)"
#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1)
#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)"
#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1)
#define SKERR_SIRQ_E016MSG "Parity error MAC 1"
#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1)
#define SKERR_SIRQ_E017MSG "Parity error MAC 2"
#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1)
#define SKERR_SIRQ_E018MSG "Parity error RX 1"
#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1)
#define SKERR_SIRQ_E019MSG "Parity error RX 2"
#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1)
#define SKERR_SIRQ_E020MSG "MAC transmit FIFO underrun"
#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1)
#define SKERR_SIRQ_E021MSG "Spurious TWSI interrupt"
#define SKERR_SIRQ_E022 (SKERR_SIRQ_E021+1)
#define SKERR_SIRQ_E022MSG "Cable pair swap error"
#define SKERR_SIRQ_E023 (SKERR_SIRQ_E022+1)
#define SKERR_SIRQ_E023MSG "Auto-negotiation error"
#define SKERR_SIRQ_E024 (SKERR_SIRQ_E023+1)
#define SKERR_SIRQ_E024MSG "FIFO overflow error"
#define SKERR_SIRQ_E025 (SKERR_SIRQ_E024+1)
#define SKERR_SIRQ_E025MSG "2 Pair Downshift detected"
extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
#endif /* _INC_SKGESIRQ_H_ */