| /* |
| * Copyright (C) 2016-2017 Zodiac Inflight Innovations |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/sound/fsl-imx-audmux.h> |
| |
| / { |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| aliases { |
| mdio-gpio0 = &mdio1; |
| }; |
| |
| mdio1: mdio { |
| compatible = "virtual,mdio-gpio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mdio1>; |
| gpios = <&gpio6 5 GPIO_ACTIVE_HIGH |
| &gpio6 4 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| reg_28p0v: regulator-28p0v { |
| compatible = "regulator-fixed"; |
| regulator-name = "28V_IN"; |
| regulator-min-microvolt = <28000000>; |
| regulator-max-microvolt = <28000000>; |
| regulator-always-on; |
| }; |
| |
| reg_12p0v: regulator-12p0v { |
| compatible = "regulator-fixed"; |
| vin-supply = <®_28p0v>; |
| regulator-name = "12V_MAIN"; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| regulator-always-on; |
| }; |
| |
| reg_5p0v_main: regulator-5p0v-main { |
| compatible = "regulator-fixed"; |
| vin-supply = <®_12p0v>; |
| regulator-name = "5V_MAIN"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| }; |
| |
| reg_5p0v_user_usb: regulator-5p0v-user-usb { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_user_usb>; |
| vin-supply = <®_5p0v_main>; |
| regulator-name = "5V_USER_USB"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; |
| startup-delay-us = <1000>; |
| }; |
| |
| reg_3p3v_pmic: regulator-3p3v-pmic { |
| compatible = "regulator-fixed"; |
| vin-supply = <®_12p0v>; |
| regulator-name = "PMIC_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| vin-supply = <®_3p3v_pmic>; |
| regulator-name = "GEN_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v_sd: regulator-3p3v-sd { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_3p3v_sd>; |
| vin-supply = <®_3p3v>; |
| regulator-name = "3V3_SD"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; |
| startup-delay-us = <1000>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v_display: regulator-3p3v-display { |
| compatible = "regulator-fixed"; |
| vin-supply = <®_12p0v>; |
| regulator-name = "3V3_DISPLAY"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| reg_3p3v_ssd: regulator-3p3v-ssd { |
| compatible = "regulator-fixed"; |
| vin-supply = <®_12p0v>; |
| regulator-name = "3V3_SSD"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| sound1 { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "Front"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,bitclock-master = <&sound1_codec>; |
| simple-audio-card,frame-master = <&sound1_codec>; |
| simple-audio-card,widgets = |
| "Headphone", "Headphone Jack"; |
| simple-audio-card,routing = |
| "Headphone Jack", "HPLEFT", |
| "Headphone Jack", "HPRIGHT", |
| "LEFTIN", "HPL", |
| "RIGHTIN", "HPR"; |
| simple-audio-card,aux-devs = <&hpa1>; |
| |
| sound1_cpu: simple-audio-card,cpu { |
| sound-dai = <&ssi2>; |
| }; |
| |
| sound1_codec: simple-audio-card,codec { |
| sound-dai = <&codec1>; |
| clocks = <&cs2000>; |
| }; |
| }; |
| |
| sound2 { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "Back"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,bitclock-master = <&sound2_codec>; |
| simple-audio-card,frame-master = <&sound2_codec>; |
| simple-audio-card,widgets = |
| "Headphone", "Headphone Jack"; |
| simple-audio-card,routing = |
| "Headphone Jack", "HPLEFT", |
| "Headphone Jack", "HPRIGHT", |
| "LEFTIN", "HPL", |
| "RIGHTIN", "HPR"; |
| simple-audio-card,aux-devs = <&hpa2>; |
| |
| sound2_cpu: simple-audio-card,cpu { |
| sound-dai = <&ssi1>; |
| }; |
| |
| sound2_codec: simple-audio-card,codec { |
| sound-dai = <&codec2>; |
| clocks = <&cs2000>; |
| }; |
| }; |
| |
| panel { |
| power-supply = <®_3p3v_display>; |
| status = "disabled"; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&lvds0_out>; |
| }; |
| }; |
| }; |
| |
| disp0: disp0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx-parallel-display"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_disp0>; |
| status = "disabled"; |
| |
| port@0 { |
| reg = <0>; |
| |
| disp0_in_0: endpoint { |
| remote-endpoint = <&ipu1_di0_disp0>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| disp0_out: endpoint { |
| remote-endpoint = <&tc358767_in>; |
| }; |
| }; |
| }; |
| |
| cs2000_ref: cs2000-ref { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24576000>; |
| }; |
| |
| cs2000_in_dummy: cs2000-in-dummy { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| |
| edp_refclk: edp-refclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| }; |
| |
| ®_arm { |
| vin-supply = <&sw1a_reg>; |
| }; |
| |
| ®_pu { |
| vin-supply = <&sw1c_reg>; |
| }; |
| |
| ®_soc { |
| vin-supply = <&sw1c_reg>; |
| }; |
| |
| &ldb { |
| lvds-channel@0 { |
| port@4 { |
| reg = <4>; |
| |
| lvds0_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| uart-has-rtscts; |
| linux,rs485-enabled-at-boot-time; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| |
| flash@0 { |
| compatible = "st,m25p128", "jedec,spi-nor"; |
| spi-max-frequency = <20000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| codec2: codec@18 { |
| compatible = "ti,tlv320dac3100"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_codec2>; |
| reg = <0x18>; |
| #sound-dai-cells = <0>; |
| HPVDD-supply = <®_3p3v>; |
| SPRVDD-supply = <®_3p3v>; |
| SPLVDD-supply = <®_3p3v>; |
| AVDD-supply = <®_3p3v>; |
| IOVDD-supply = <®_3p3v>; |
| DVDD-supply = <&vgen4_reg>; |
| gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| accel@1c { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_accel>; |
| compatible = "fsl,mma8451"; |
| reg = <0x1c>; |
| interrupt-parent = <&gpio1>; |
| interrupt-names = "int1", "int2"; |
| interrupts = <18 IRQ_TYPE_LEVEL_LOW>, <20 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| hpa2: amp@60 { |
| compatible = "ti,tpa6130a2"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_tpa2>; |
| reg = <0x60>; |
| power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| Vdd-supply = <®_5p0v_main>; |
| }; |
| |
| edp-bridge@68 { |
| compatible = "toshiba,tc358767"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_tc358767>; |
| reg = <0x68>; |
| shutdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| clock-names = "ref"; |
| clocks = <&edp_refclk>; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@1 { |
| reg = <1>; |
| |
| tc358767_in: endpoint { |
| remote-endpoint = <&disp0_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| pmic@08 { |
| compatible = "fsl,pfuze100"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pfuze100_irq>; |
| reg = <0x08>; |
| interrupt-parent = <&gpio7>; |
| interrupts = <13 IRQ_TYPE_LEVEL_LOW>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| temp-sense@48 { |
| compatible = "national,lm75"; |
| reg = <0x48>; |
| }; |
| |
| cs2000: clkgen@4e { |
| compatible = "cirrus,cs2000-cp"; |
| reg = <0x4e>; |
| #clock-cells = <0>; |
| clock-names = "clk_in", "ref_clk"; |
| clocks = <&cs2000_in_dummy>, <&cs2000_ref>; |
| assigned-clocks = <&cs2000>; |
| assigned-clock-rates = <24000000>; |
| }; |
| |
| eeprom@54 { |
| compatible = "at,24c128"; |
| reg = <0x54>; |
| }; |
| |
| rtc@68 { |
| compatible = "dallas,ds1341"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| codec1: codec@18 { |
| compatible = "ti,tlv320dac3100"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_codec1>; |
| reg = <0x18>; |
| #sound-dai-cells = <0>; |
| HPVDD-supply = <®_3p3v>; |
| SPRVDD-supply = <®_3p3v>; |
| SPLVDD-supply = <®_3p3v>; |
| AVDD-supply = <®_3p3v>; |
| IOVDD-supply = <®_3p3v>; |
| DVDD-supply = <&vgen4_reg>; |
| gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| touchscreen@20 { |
| compatible = "syna,rmi4-i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ts>; |
| reg = <0x20>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <8 IRQ_TYPE_LEVEL_LOW>; |
| vdd-supply = <®_5p0v_main>; |
| vio-supply = <®_3p3v>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| rmi4-f01@1 { |
| reg = <0x1>; |
| syna,nosleep-mode = <1>; |
| }; |
| |
| rmi4-f11@11 { |
| reg = <0x11>; |
| touchscreen-inverted-y; |
| touchscreen-swapped-x-y; |
| syna,sensor-type = <1>; |
| }; |
| |
| rmi4-f12@12 { |
| reg = <0x12>; |
| touchscreen-inverted-y; |
| touchscreen-swapped-x-y; |
| syna,sensor-type = <1>; |
| }; |
| }; |
| |
| hpa1: amp@60 { |
| compatible = "ti,tpa6130a2"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_tpa1>; |
| reg = <0x60>; |
| power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
| Vdd-supply = <®_5p0v_main>; |
| }; |
| }; |
| |
| &ipu1_di0_disp0 { |
| remote-endpoint = <&disp0_in_0>; |
| }; |
| |
| &pcie { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie>; |
| reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| bus-width = <4>; |
| cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; |
| vmmc-supply = <®_3p3v_sd>; |
| vqmmc-supply = <®_3p3v>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| bus-width = <4>; |
| cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; |
| vmmc-supply = <®_3p3v_sd>; |
| vqmmc-supply = <®_3p3v>; |
| status = "okay"; |
| }; |
| |
| &usdhc4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc4>; |
| bus-width = <8>; |
| vmmc-supply = <®_3p3v>; |
| vqmmc-supply = <®_3p3v>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &sata { |
| target-supply = <®_3p3v_ssd>; |
| status = "okay"; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rmii"; |
| phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; |
| phy-reset-duration = <100>; |
| phy-supply = <®_3p3v>; |
| status = "okay"; |
| |
| fixed-link { |
| speed = <100>; |
| full-duplex; |
| }; |
| }; |
| |
| &usbh1 { |
| vbus-supply = <®_5p0v_main>; |
| status = "okay"; |
| }; |
| |
| &usbotg { |
| vbus-supply = <®_5p0v_user_usb>; |
| disable-over-current; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &ssi1 { |
| status = "okay"; |
| }; |
| |
| &ssi2 { |
| status = "okay"; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux>; |
| status = "okay"; |
| |
| ssi1 { |
| fsl,audmux-port = <0>; |
| fsl,port-config = < |
| (IMX_AUDMUX_V2_PTCR_SYN | |
| IMX_AUDMUX_V2_PTCR_TFSEL(2) | |
| IMX_AUDMUX_V2_PTCR_TCSEL(2) | |
| IMX_AUDMUX_V2_PTCR_TFSDIR | |
| IMX_AUDMUX_V2_PTCR_TCLKDIR) |
| IMX_AUDMUX_V2_PDCR_RXDSEL(2) |
| >; |
| }; |
| |
| aud3 { |
| fsl,audmux-port = <2>; |
| fsl,port-config = < |
| IMX_AUDMUX_V2_PTCR_SYN |
| IMX_AUDMUX_V2_PDCR_RXDSEL(0) |
| >; |
| }; |
| |
| ssi2 { |
| fsl,audmux-port = <1>; |
| fsl,port-config = < |
| (IMX_AUDMUX_V2_PTCR_SYN | |
| IMX_AUDMUX_V2_PTCR_TFSEL(4) | |
| IMX_AUDMUX_V2_PTCR_TCSEL(4) | |
| IMX_AUDMUX_V2_PTCR_TFSDIR | |
| IMX_AUDMUX_V2_PTCR_TCLKDIR) |
| IMX_AUDMUX_V2_PDCR_RXDSEL(4) |
| >; |
| }; |
| |
| aud5 { |
| fsl,audmux-port = <4>; |
| fsl,port-config = < |
| IMX_AUDMUX_V2_PTCR_SYN |
| IMX_AUDMUX_V2_PDCR_RXDSEL(1) |
| >; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl_accel: accelgrp { |
| fsl,pins = < |
| MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x4001b000 |
| MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x4001b000 |
| >; |
| }; |
| |
| pinctrl_audmux: audmuxgrp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 |
| MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 |
| MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 |
| MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 |
| MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0 |
| MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 |
| >; |
| }; |
| |
| pinctrl_codec1: dac1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x40000038 |
| >; |
| }; |
| |
| pinctrl_codec2: dac2grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x40000038 |
| >; |
| }; |
| |
| pinctrl_disp0: disp0grp { |
| fsl,pins = < |
| MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f9 |
| MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f9 |
| MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f9 |
| MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f9 |
| MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f9 |
| MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f9 |
| MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f9 |
| MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f9 |
| MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f9 |
| MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f9 |
| MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f9 |
| MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f9 |
| MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f9 |
| MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f9 |
| MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f9 |
| MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f9 |
| MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f9 |
| MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f9 |
| MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f9 |
| MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f9 |
| MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f9 |
| MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f9 |
| MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f9 |
| MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f9 |
| MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f9 |
| MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f9 |
| MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f9 |
| MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f9 |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 |
| MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 |
| MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 |
| MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x000b1 |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b1 |
| MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x100f5 |
| MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x100f5 |
| MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x100c0 |
| MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x100c0 |
| MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x100f5 |
| MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x100f5 |
| MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x40010040 |
| MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x100b0 |
| MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 |
| MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| >; |
| }; |
| |
| pinctrl_mdio1: bitbangmdiogrp { |
| fsl,pins = < |
| /* Bitbang MDIO for DEB Switch */ |
| MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x4001b030 |
| MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40018830 |
| >; |
| }; |
| |
| pinctrl_pcie: pciegrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x10038 |
| >; |
| }; |
| |
| pinctrl_pfuze100_irq: pfuze100grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x40010000 |
| >; |
| }; |
| |
| pinctrl_reg_3p3v_sd: mmcsupply1grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x858 |
| >; |
| }; |
| |
| pinctrl_reg_user_usb: usbotggrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x40000038 |
| >; |
| }; |
| |
| pinctrl_rmii_phy_irq: phygrp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x40010000 |
| >; |
| }; |
| |
| pinctrl_tc358767: tc358767grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x10 |
| >; |
| }; |
| |
| pinctrl_tpa1: tpa6130-1grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x40000038 |
| >; |
| }; |
| |
| pinctrl_tpa2: tpa6130-2grp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x40000038 |
| >; |
| }; |
| |
| pinctrl_ts: tsgrp { |
| fsl,pins = < |
| MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 |
| MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
| MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 |
| MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD2_CMD__SD2_CMD 0x10059 |
| MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069 |
| MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040 |
| MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD3_CMD__SD3_CMD 0x10059 |
| MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10069 |
| MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040 |
| MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040 |
| |
| >; |
| }; |
| |
| pinctrl_usdhc4: usdhc4grp { |
| fsl,pins = < |
| MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 |
| MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 |
| MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 |
| MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 |
| MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 |
| MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 |
| MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 |
| MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 |
| MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 |
| MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 |
| MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x1b0b1 |
| >; |
| }; |
| }; |