arch/x86/oprofile/op_model_ppro.c - kernel/msm-4.19 - Gitiles

 /*
  * @file op_model_ppro.h
  * Family 6 perfmon and architectural perfmon MSR operations
  *
  * @remark Copyright 2002 OProfile authors
  * @remark Copyright 2008 Intel Corporation
  * @remark Read the file COPYING
  *
  * @author John Levon
  * @author Philippe Elie
  * @author Graydon Hoare
  * @author Andi Kleen
  */

 #include <linux/oprofile.h>
 #include <linux/slab.h>
 #include <asm/ptrace.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <asm/nmi.h>
 #include <asm/perf_counter.h>

 #include "op_x86_model.h"
 #include "op_counter.h"

 static int num_counters = 2;
 static int counter_width = 32;

 #define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
 #define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))

 #define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
 #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
 #define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
 #define CTRL_SET_ACTIVE(n) (n |= (1<<22))
 #define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
 #define CTRL_CLEAR(x) (x &= (1<<21))
 #define CTRL_SET_ENABLE(val) (val |= 1<<20)
 #define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
 #define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
 #define CTRL_SET_UM(val, m) (val |= (m << 8))
 #define CTRL_SET_EVENT(val, e) (val |= e)

 static u64 *reset_value;

 static void ppro_fill_in_addresses(struct op_msrs * const msrs)
 {
 	int i;

 	for (i = 0; i < num_counters; i++) {
 		if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
 			msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
 		else
 			msrs->counters[i].addr = 0;
 	}

 	for (i = 0; i < num_counters; i++) {
 		if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
 			msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
 		else
 			msrs->controls[i].addr = 0;
 	}
 }


 static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
 	int i;

 	if (!reset_value) {
 		reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
 					GFP_ATOMIC);
 		if (!reset_value)
 			return;
 	}

 	if (cpu_has_arch_perfmon) {
 		union cpuid10_eax eax;
 		eax.full = cpuid_eax(0xa);
 		if (counter_width < eax.split.bit_width)
 			counter_width = eax.split.bit_width;
 	}

 	/* clear all counters */
 	for (i = 0 ; i < num_counters; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
 		CTRL_READ(low, high, msrs, i);
 		CTRL_CLEAR(low);
 		CTRL_WRITE(low, high, msrs, i);
 	}

 	/* avoid a false detection of ctr overflows in NMI handler */
 	for (i = 0; i < num_counters; ++i) {
 		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
 			continue;
 		wrmsrl(msrs->counters[i].addr, -1LL);
 	}

 	/* enable active counters */
 	for (i = 0; i < num_counters; ++i) {
 		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;

 			wrmsrl(msrs->counters[i].addr, -reset_value[i]);

 			CTRL_READ(low, high, msrs, i);
 			CTRL_CLEAR(low);
 			CTRL_SET_ENABLE(low);
 			CTRL_SET_USR(low, counter_config[i].user);
 			CTRL_SET_KERN(low, counter_config[i].kernel);
 			CTRL_SET_UM(low, counter_config[i].unit_mask);
 			CTRL_SET_EVENT(low, counter_config[i].event);
 			CTRL_WRITE(low, high, msrs, i);
 		} else {
 			reset_value[i] = 0;
 		}
 	}
 }


 static int ppro_check_ctrs(struct pt_regs * const regs,
 			   struct op_msrs const * const msrs)
 {
 	u64 val;
 	int i;

 	for (i = 0 ; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
 		if (CTR_OVERFLOWED(val)) {
 			oprofile_add_sample(regs, i);
 			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 		}
 	}

 	/* Only P6 based Pentium M need to re-unmask the apic vector but it
 	 * doesn't hurt other P6 variant */
 	apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);

 	/* We can't work out if we really handled an interrupt. We
 	 * might have caught a *second* counter just after overflowing
 	 * the interrupt for this counter then arrives
 	 * and we don't find a counter that's overflowed, so we
 	 * would return 0 and get dazed + confused. Instead we always
 	 * assume we found an overflow. This sucks.
 	 */
 	return 1;
 }


 static void ppro_start(struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
 	int i;

 	if (!reset_value)
 		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
 			CTRL_READ(low, high, msrs, i);
 			CTRL_SET_ACTIVE(low);
 			CTRL_WRITE(low, high, msrs, i);
 		}
 	}
 }


 static void ppro_stop(struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
 	int i;

 	if (!reset_value)
 		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
 		CTRL_READ(low, high, msrs, i);
 		CTRL_SET_INACTIVE(low);
 		CTRL_WRITE(low, high, msrs, i);
 	}
 }

 static void ppro_shutdown(struct op_msrs const * const msrs)
 {
 	int i;

 	for (i = 0 ; i < num_counters ; ++i) {
 		if (CTR_IS_RESERVED(msrs, i))
 			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 	}
 	for (i = 0 ; i < num_counters ; ++i) {
 		if (CTRL_IS_RESERVED(msrs, i))
 			release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 	}
 	if (reset_value) {
 		kfree(reset_value);
 		reset_value = NULL;
 	}
 }


 struct op_x86_model_spec op_ppro_spec = {
 	.num_counters		= 2,	/* can be overriden */
 	.num_controls		= 2,	/* dito */
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
 	.check_ctrs		= &ppro_check_ctrs,
 	.start			= &ppro_start,
 	.stop			= &ppro_stop,
 	.shutdown		= &ppro_shutdown
 };

 /*
  * Architectural performance monitoring.
  *
  * Newer Intel CPUs (Core1+) have support for architectural
  * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
  * The advantage of this is that it can be done without knowing about
  * the specific CPU.
  */

 void arch_perfmon_setup_counters(void)
 {
 	union cpuid10_eax eax;

 	eax.full = cpuid_eax(0xa);

 	/* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
 	if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
 		current_cpu_data.x86_model == 15) {
 		eax.split.version_id = 2;
 		eax.split.num_counters = 2;
 		eax.split.bit_width = 40;
 	}

 	num_counters = eax.split.num_counters;

 	op_arch_perfmon_spec.num_counters = num_counters;
 	op_arch_perfmon_spec.num_controls = num_counters;
 	op_ppro_spec.num_counters = num_counters;
 	op_ppro_spec.num_controls = num_counters;
 }

 struct op_x86_model_spec op_arch_perfmon_spec = {
 	/* num_counters/num_controls filled in at runtime */
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	/* user space does the cpuid check for available events */
 	.setup_ctrs		= &ppro_setup_ctrs,
 	.check_ctrs		= &ppro_check_ctrs,
 	.start			= &ppro_start,
 	.stop			= &ppro_stop,
 	.shutdown		= &ppro_shutdown
 };
	/*
	* @file op_model_ppro.h
	* Family 6 perfmon and architectural perfmon MSR operations
	*
	* @remark Copyright 2002 OProfile authors
	* @remark Copyright 2008 Intel Corporation
	* @remark Read the file COPYING
	*
	* @author John Levon
	* @author Philippe Elie
	* @author Graydon Hoare
	* @author Andi Kleen
	*/

	#include <linux/oprofile.h>
	#include <linux/slab.h>
	#include <asm/ptrace.h>
	#include <asm/msr.h>
	#include <asm/apic.h>
	#include <asm/nmi.h>
	#include <asm/perf_counter.h>

	#include "op_x86_model.h"
	#include "op_counter.h"

	static int num_counters = 2;
	static int counter_width = 32;

	#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
	#define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))

	#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
	#define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
	#define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
	#define CTRL_SET_ACTIVE(n) (n \|= (1<<22))
	#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
	#define CTRL_CLEAR(x) (x &= (1<<21))
	#define CTRL_SET_ENABLE(val) (val \|= 1<<20)
	#define CTRL_SET_USR(val, u) (val \|= ((u & 1) << 16))
	#define CTRL_SET_KERN(val, k) (val \|= ((k & 1) << 17))
	#define CTRL_SET_UM(val, m) (val \|= (m << 8))
	#define CTRL_SET_EVENT(val, e) (val \|= e)

	static u64 *reset_value;

	static void ppro_fill_in_addresses(struct op_msrs * const msrs)
	{
	int i;

	for (i = 0; i < num_counters; i++) {
	if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
	msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
	else
	msrs->counters[i].addr = 0;
	}

	for (i = 0; i < num_counters; i++) {
	if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
	msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
	else
	msrs->controls[i].addr = 0;
	}
	}


	static void ppro_setup_ctrs(struct op_msrs const * const msrs)
	{
	unsigned int low, high;
	int i;

	if (!reset_value) {
	reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
	GFP_ATOMIC);
	if (!reset_value)
	return;
	}

	if (cpu_has_arch_perfmon) {
	union cpuid10_eax eax;
	eax.full = cpuid_eax(0xa);
	if (counter_width < eax.split.bit_width)
	counter_width = eax.split.bit_width;
	}

	/* clear all counters */
	for (i = 0 ; i < num_counters; ++i) {
	if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
	continue;
	CTRL_READ(low, high, msrs, i);
	CTRL_CLEAR(low);
	CTRL_WRITE(low, high, msrs, i);
	}

	/* avoid a false detection of ctr overflows in NMI handler */
	for (i = 0; i < num_counters; ++i) {
	if (unlikely(!CTR_IS_RESERVED(msrs, i)))
	continue;
	wrmsrl(msrs->counters[i].addr, -1LL);
	}

	/* enable active counters */
	for (i = 0; i < num_counters; ++i) {
	if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
	reset_value[i] = counter_config[i].count;

	wrmsrl(msrs->counters[i].addr, -reset_value[i]);

	CTRL_READ(low, high, msrs, i);
	CTRL_CLEAR(low);
	CTRL_SET_ENABLE(low);
	CTRL_SET_USR(low, counter_config[i].user);
	CTRL_SET_KERN(low, counter_config[i].kernel);
	CTRL_SET_UM(low, counter_config[i].unit_mask);
	CTRL_SET_EVENT(low, counter_config[i].event);
	CTRL_WRITE(low, high, msrs, i);
	} else {
	reset_value[i] = 0;
	}
	}
	}


	static int ppro_check_ctrs(struct pt_regs * const regs,
	struct op_msrs const * const msrs)
	{
	u64 val;
	int i;

	for (i = 0 ; i < num_counters; ++i) {
	if (!reset_value[i])
	continue;
	rdmsrl(msrs->counters[i].addr, val);
	if (CTR_OVERFLOWED(val)) {
	oprofile_add_sample(regs, i);
	wrmsrl(msrs->counters[i].addr, -reset_value[i]);
	}
	}

	/* Only P6 based Pentium M need to re-unmask the apic vector but it
	* doesn't hurt other P6 variant */
	apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);

	/* We can't work out if we really handled an interrupt. We
	* might have caught a second counter just after overflowing
	* the interrupt for this counter then arrives
	* and we don't find a counter that's overflowed, so we
	* would return 0 and get dazed + confused. Instead we always
	* assume we found an overflow. This sucks.
	*/
	return 1;
	}


	static void ppro_start(struct op_msrs const * const msrs)
	{
	unsigned int low, high;
	int i;

	if (!reset_value)
	return;
	for (i = 0; i < num_counters; ++i) {
	if (reset_value[i]) {
	CTRL_READ(low, high, msrs, i);
	CTRL_SET_ACTIVE(low);
	CTRL_WRITE(low, high, msrs, i);
	}
	}
	}


	static void ppro_stop(struct op_msrs const * const msrs)
	{
	unsigned int low, high;
	int i;

	if (!reset_value)
	return;
	for (i = 0; i < num_counters; ++i) {
	if (!reset_value[i])
	continue;
	CTRL_READ(low, high, msrs, i);
	CTRL_SET_INACTIVE(low);
	CTRL_WRITE(low, high, msrs, i);
	}
	}

	static void ppro_shutdown(struct op_msrs const * const msrs)
	{
	int i;

	for (i = 0 ; i < num_counters ; ++i) {
	if (CTR_IS_RESERVED(msrs, i))
	release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
	}
	for (i = 0 ; i < num_counters ; ++i) {
	if (CTRL_IS_RESERVED(msrs, i))
	release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
	}
	if (reset_value) {
	kfree(reset_value);
	reset_value = NULL;
	}
	}


	struct op_x86_model_spec op_ppro_spec = {
	.num_counters = 2, /* can be overriden */
	.num_controls = 2, /* dito */
	.fill_in_addresses = &ppro_fill_in_addresses,
	.setup_ctrs = &ppro_setup_ctrs,
	.check_ctrs = &ppro_check_ctrs,
	.start = &ppro_start,
	.stop = &ppro_stop,
	.shutdown = &ppro_shutdown
	};

	/*
	* Architectural performance monitoring.
	*
	* Newer Intel CPUs (Core1+) have support for architectural
	* events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
	* The advantage of this is that it can be done without knowing about
	* the specific CPU.
	*/

	void arch_perfmon_setup_counters(void)
	{
	union cpuid10_eax eax;

	eax.full = cpuid_eax(0xa);

	/* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
	if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
	current_cpu_data.x86_model == 15) {
	eax.split.version_id = 2;
	eax.split.num_counters = 2;
	eax.split.bit_width = 40;
	}

	num_counters = eax.split.num_counters;

	op_arch_perfmon_spec.num_counters = num_counters;
	op_arch_perfmon_spec.num_controls = num_counters;
	op_ppro_spec.num_counters = num_counters;
	op_ppro_spec.num_controls = num_counters;
	}

	struct op_x86_model_spec op_arch_perfmon_spec = {
	/* num_counters/num_controls filled in at runtime */
	.fill_in_addresses = &ppro_fill_in_addresses,
	/* user space does the cpuid check for available events */
	.setup_ctrs = &ppro_setup_ctrs,
	.check_ctrs = &ppro_check_ctrs,
	.start = &ppro_start,
	.stop = &ppro_stop,
	.shutdown = &ppro_shutdown
	};