| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * SDM845 SoC device tree source |
| * |
| * Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <dt-bindings/clock/qcom,gcc-sdm845.h> |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2c3 = &i2c3; |
| i2c4 = &i2c4; |
| i2c5 = &i2c5; |
| i2c6 = &i2c6; |
| i2c7 = &i2c7; |
| i2c8 = &i2c8; |
| i2c9 = &i2c9; |
| i2c10 = &i2c10; |
| i2c11 = &i2c11; |
| i2c12 = &i2c12; |
| i2c13 = &i2c13; |
| i2c14 = &i2c14; |
| i2c15 = &i2c15; |
| spi0 = &spi0; |
| spi1 = &spi1; |
| spi2 = &spi2; |
| spi3 = &spi3; |
| spi4 = &spi4; |
| spi5 = &spi5; |
| spi6 = &spi6; |
| spi7 = &spi7; |
| spi8 = &spi8; |
| spi9 = &spi9; |
| spi10 = &spi10; |
| spi11 = &spi11; |
| spi12 = &spi12; |
| spi13 = &spi13; |
| spi14 = &spi14; |
| spi15 = &spi15; |
| }; |
| |
| chosen { }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the size */ |
| reg = <0 0x80000000 0 0>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| memory@85fc0000 { |
| reg = <0 0x85fc0000 0 0x20000>; |
| no-map; |
| }; |
| |
| memory@85fe0000 { |
| compatible = "qcom,cmd-db"; |
| reg = <0x0 0x85fe0000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| smem_mem: memory@86000000 { |
| reg = <0x0 0x86000000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| memory@86200000 { |
| reg = <0 0x86200000 0 0x2d00000>; |
| no-map; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo385"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| L2_0: l2-cache { |
| compatible = "cache"; |
| next-level-cache = <&L3_0>; |
| L3_0: l3-cache { |
| compatible = "cache"; |
| }; |
| }; |
| }; |
| |
| CPU1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo385"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_100>; |
| L2_100: l2-cache { |
| compatible = "cache"; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo385"; |
| reg = <0x0 0x200>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_200>; |
| L2_200: l2-cache { |
| compatible = "cache"; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo385"; |
| reg = <0x0 0x300>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_300>; |
| L2_300: l2-cache { |
| compatible = "cache"; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU4: cpu@400 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo385"; |
| reg = <0x0 0x400>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_400>; |
| L2_400: l2-cache { |
| compatible = "cache"; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU5: cpu@500 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo385"; |
| reg = <0x0 0x500>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_500>; |
| L2_500: l2-cache { |
| compatible = "cache"; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU6: cpu@600 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo385"; |
| reg = <0x0 0x600>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_600>; |
| L2_600: l2-cache { |
| compatible = "cache"; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU7: cpu@700 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo385"; |
| reg = <0x0 0x700>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_700>; |
| L2_700: l2-cache { |
| compatible = "cache"; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| clocks { |
| xo_board: xo-board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <38400000>; |
| clock-output-names = "xo_board"; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32764>; |
| }; |
| }; |
| |
| tcsr_mutex: hwlock { |
| compatible = "qcom,tcsr-mutex"; |
| syscon = <&tcsr_mutex_regs 0 0x1000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| smem { |
| compatible = "qcom,smem"; |
| memory-region = <&smem_mem>; |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| soc: soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| gcc: clock-controller@100000 { |
| compatible = "qcom,gcc-sdm845"; |
| reg = <0x100000 0x1f0000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| qupv3_id_0: geniqup@8c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x8c0000 0x6000>; |
| clock-names = "m-ahb", "s-ahb"; |
| clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| status = "disabled"; |
| |
| i2c0: i2c@880000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x880000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c0_default>; |
| interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@880000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x880000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi0_default>; |
| interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@884000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x884000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c1_default>; |
| interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@884000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x884000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi1_default>; |
| interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@888000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x888000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c2_default>; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@888000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x888000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi2_default>; |
| interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@88c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x88c000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c3_default>; |
| interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@88c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x88c000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi3_default>; |
| interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@890000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x890000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c4_default>; |
| interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@890000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x890000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi4_default>; |
| interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@894000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x894000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c5_default>; |
| interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@894000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x894000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi5_default>; |
| interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@898000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x898000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c6_default>; |
| interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi6: spi@898000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x898000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi6_default>; |
| interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@89c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x89c000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c7_default>; |
| interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi7: spi@89c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x89c000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi7_default>; |
| interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| qupv3_id_1: geniqup@ac0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0xac0000 0x6000>; |
| clock-names = "m-ahb", "s-ahb"; |
| clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| status = "disabled"; |
| |
| i2c8: i2c@a80000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0xa80000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c8_default>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi8: spi@a80000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0xa80000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi8_default>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c9: i2c@a84000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0xa84000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c9_default>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi9: spi@a84000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0xa84000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi9_default>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart9: serial@a84000 { |
| compatible = "qcom,geni-debug-uart"; |
| reg = <0xa84000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_uart9_default>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2c10: i2c@a88000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0xa88000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c10_default>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi10: spi@a88000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0xa88000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi10_default>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c11: i2c@a8c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0xa8c000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c11_default>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi11: spi@a8c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0xa8c000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi11_default>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c12: i2c@a90000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0xa90000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c12_default>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi12: spi@a90000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0xa90000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi12_default>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c13: i2c@a94000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0xa94000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c13_default>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi13: spi@a94000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0xa94000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi13_default>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c14: i2c@a98000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0xa98000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c14_default>; |
| interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi14: spi@a98000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0xa98000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi14_default>; |
| interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c15: i2c@a9c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0xa9c000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_i2c15_default>; |
| interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi15: spi@a9c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0xa9c000 0x4000>; |
| clock-names = "se"; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&qup_spi15_default>; |
| interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| tcsr_mutex_regs: syscon@1f40000 { |
| compatible = "syscon"; |
| reg = <0x1f40000 0x40000>; |
| }; |
| |
| tlmm: pinctrl@3400000 { |
| compatible = "qcom,sdm845-pinctrl"; |
| reg = <0x03400000 0xc00000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| qup_i2c0_default: qup-i2c0-default { |
| pinmux { |
| pins = "gpio0", "gpio1"; |
| function = "qup0"; |
| }; |
| }; |
| |
| qup_i2c1_default: qup-i2c1-default { |
| pinmux { |
| pins = "gpio17", "gpio18"; |
| function = "qup1"; |
| }; |
| }; |
| |
| qup_i2c2_default: qup-i2c2-default { |
| pinmux { |
| pins = "gpio27", "gpio28"; |
| function = "qup2"; |
| }; |
| }; |
| |
| qup_i2c3_default: qup-i2c3-default { |
| pinmux { |
| pins = "gpio41", "gpio42"; |
| function = "qup3"; |
| }; |
| }; |
| |
| qup_i2c4_default: qup-i2c4-default { |
| pinmux { |
| pins = "gpio89", "gpio90"; |
| function = "qup4"; |
| }; |
| }; |
| |
| qup_i2c5_default: qup-i2c5-default { |
| pinmux { |
| pins = "gpio85", "gpio86"; |
| function = "qup5"; |
| }; |
| }; |
| |
| qup_i2c6_default: qup-i2c6-default { |
| pinmux { |
| pins = "gpio45", "gpio46"; |
| function = "qup6"; |
| }; |
| }; |
| |
| qup_i2c7_default: qup-i2c7-default { |
| pinmux { |
| pins = "gpio93", "gpio94"; |
| function = "qup7"; |
| }; |
| }; |
| |
| qup_i2c8_default: qup-i2c8-default { |
| pinmux { |
| pins = "gpio65", "gpio66"; |
| function = "qup8"; |
| }; |
| }; |
| |
| qup_i2c9_default: qup-i2c9-default { |
| pinmux { |
| pins = "gpio6", "gpio7"; |
| function = "qup9"; |
| }; |
| }; |
| |
| qup_i2c10_default: qup-i2c10-default { |
| pinmux { |
| pins = "gpio55", "gpio56"; |
| function = "qup10"; |
| }; |
| }; |
| |
| qup_i2c11_default: qup-i2c11-default { |
| pinmux { |
| pins = "gpio31", "gpio32"; |
| function = "qup11"; |
| }; |
| }; |
| |
| qup_i2c12_default: qup-i2c12-default { |
| pinmux { |
| pins = "gpio49", "gpio50"; |
| function = "qup12"; |
| }; |
| }; |
| |
| qup_i2c13_default: qup-i2c13-default { |
| pinmux { |
| pins = "gpio105", "gpio106"; |
| function = "qup13"; |
| }; |
| }; |
| |
| qup_i2c14_default: qup-i2c14-default { |
| pinmux { |
| pins = "gpio33", "gpio34"; |
| function = "qup14"; |
| }; |
| }; |
| |
| qup_i2c15_default: qup-i2c15-default { |
| pinmux { |
| pins = "gpio81", "gpio82"; |
| function = "qup15"; |
| }; |
| }; |
| |
| qup_spi0_default: qup-spi0-default { |
| pinmux { |
| pins = "gpio0", "gpio1", |
| "gpio2", "gpio3"; |
| function = "qup0"; |
| }; |
| }; |
| |
| qup_spi1_default: qup-spi1-default { |
| pinmux { |
| pins = "gpio17", "gpio18", |
| "gpio19", "gpio20"; |
| function = "qup1"; |
| }; |
| }; |
| |
| qup_spi2_default: qup-spi2-default { |
| pinmux { |
| pins = "gpio27", "gpio28", |
| "gpio29", "gpio30"; |
| function = "qup2"; |
| }; |
| }; |
| |
| qup_spi3_default: qup-spi3-default { |
| pinmux { |
| pins = "gpio41", "gpio42", |
| "gpio43", "gpio44"; |
| function = "qup3"; |
| }; |
| }; |
| |
| qup_spi4_default: qup-spi4-default { |
| pinmux { |
| pins = "gpio89", "gpio90", |
| "gpio91", "gpio92"; |
| function = "qup4"; |
| }; |
| }; |
| |
| qup_spi5_default: qup-spi5-default { |
| pinmux { |
| pins = "gpio85", "gpio86", |
| "gpio87", "gpio88"; |
| function = "qup5"; |
| }; |
| }; |
| |
| qup_spi6_default: qup-spi6-default { |
| pinmux { |
| pins = "gpio45", "gpio46", |
| "gpio47", "gpio48"; |
| function = "qup6"; |
| }; |
| }; |
| |
| qup_spi7_default: qup-spi7-default { |
| pinmux { |
| pins = "gpio93", "gpio94", |
| "gpio95", "gpio96"; |
| function = "qup7"; |
| }; |
| }; |
| |
| qup_spi8_default: qup-spi8-default { |
| pinmux { |
| pins = "gpio65", "gpio66", |
| "gpio67", "gpio68"; |
| function = "qup8"; |
| }; |
| }; |
| |
| qup_spi9_default: qup-spi9-default { |
| pinmux { |
| pins = "gpio6", "gpio7", |
| "gpio4", "gpio5"; |
| function = "qup9"; |
| }; |
| }; |
| |
| qup_spi10_default: qup-spi10-default { |
| pinmux { |
| pins = "gpio55", "gpio56", |
| "gpio53", "gpio54"; |
| function = "qup10"; |
| }; |
| }; |
| |
| qup_spi11_default: qup-spi11-default { |
| pinmux { |
| pins = "gpio31", "gpio32", |
| "gpio33", "gpio34"; |
| function = "qup11"; |
| }; |
| }; |
| |
| qup_spi12_default: qup-spi12-default { |
| pinmux { |
| pins = "gpio49", "gpio50", |
| "gpio51", "gpio52"; |
| function = "qup12"; |
| }; |
| }; |
| |
| qup_spi13_default: qup-spi13-default { |
| pinmux { |
| pins = "gpio105", "gpio106", |
| "gpio107", "gpio108"; |
| function = "qup13"; |
| }; |
| }; |
| |
| qup_spi14_default: qup-spi14-default { |
| pinmux { |
| pins = "gpio33", "gpio34", |
| "gpio31", "gpio32"; |
| function = "qup14"; |
| }; |
| }; |
| |
| qup_spi15_default: qup-spi15-default { |
| pinmux { |
| pins = "gpio81", "gpio82", |
| "gpio83", "gpio84"; |
| function = "qup15"; |
| }; |
| }; |
| |
| qup_uart9_default: qup-uart9-default { |
| pinmux { |
| pins = "gpio4", "gpio5"; |
| function = "qup9"; |
| }; |
| }; |
| }; |
| |
| tsens0: thermal-sensor@c263000 { |
| compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; |
| reg = <0xc263000 0x1ff>, /* TM */ |
| <0xc222000 0x1ff>; /* SROT */ |
| #qcom,sensors = <13>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens1: thermal-sensor@c265000 { |
| compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; |
| reg = <0xc265000 0x1ff>, /* TM */ |
| <0xc223000 0x1ff>; /* SROT */ |
| #qcom,sensors = <8>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| spmi_bus: spmi@c440000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0xc440000 0x1100>, |
| <0xc600000 0x2000000>, |
| <0xe600000 0x100000>, |
| <0xe700000 0xa0000>, |
| <0xc40a000 0x26000>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| cell-index = <0>; |
| }; |
| |
| apss_shared: mailbox@17990000 { |
| compatible = "qcom,sdm845-apss-shared"; |
| reg = <0x17990000 0x1000>; |
| #mbox-cells = <1>; |
| }; |
| |
| apps_rsc: rsc@179c0000 { |
| label = "apps_rsc"; |
| compatible = "qcom,rpmh-rsc"; |
| reg = <0x179c0000 0x10000>, |
| <0x179d0000 0x10000>, |
| <0x179e0000 0x10000>; |
| reg-names = "drv-0", "drv-1", "drv-2"; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,tcs-offset = <0xd00>; |
| qcom,drv-id = <2>; |
| qcom,tcs-config = <ACTIVE_TCS 2>, |
| <SLEEP_TCS 3>, |
| <WAKE_TCS 3>, |
| <CONTROL_TCS 1>; |
| |
| rpmhcc: clock-controller { |
| compatible = "qcom,sdm845-rpmh-clk"; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| intc: interrupt-controller@17a00000 { |
| compatible = "arm,gic-v3"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x17a00000 0x10000>, /* GICD */ |
| <0x17a60000 0x100000>; /* GICR * 8 */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| gic-its@17a40000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| #msi-cells = <1>; |
| reg = <0x17a40000 0x20000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timer@17c90000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x17c90000 0x1000>; |
| |
| frame@17ca0000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17ca0000 0x1000>, |
| <0x17cb0000 0x1000>; |
| }; |
| |
| frame@17cc0000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17cc0000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17cd0000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17cd0000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17ce0000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17ce0000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17cf0000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17cf0000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17d00000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17d00000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17d10000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17d10000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |