drivers/net/phy/sfp-bus.c - kernel/msm-4.19 - Gitiles

 #include <linux/export.h>
 #include <linux/kref.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/phylink.h>
 #include <linux/rtnetlink.h>
 #include <linux/slab.h>

 #include "sfp.h"

 /**
  * struct sfp_bus - internal representation of a sfp bus
  */
 struct sfp_bus {
 	/* private: */
 	struct kref kref;
 	struct list_head node;
 	struct fwnode_handle *fwnode;

 	const struct sfp_socket_ops *socket_ops;
 	struct device *sfp_dev;
 	struct sfp *sfp;

 	const struct sfp_upstream_ops *upstream_ops;
 	void *upstream;
 	struct net_device *netdev;
 	struct phy_device *phydev;

 	bool registered;
 	bool started;
 };

 /**
  * sfp_parse_port() - Parse the EEPROM base ID, setting the port type
  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
  * @id: a pointer to the module's &struct sfp_eeprom_id
  * @support: optional pointer to an array of unsigned long for the
  *   ethtool support mask
  *
  * Parse the EEPROM identification given in @id, and return one of
  * %PORT_TP, %PORT_FIBRE or %PORT_OTHER. If @support is non-%NULL,
  * also set the ethtool %ETHTOOL_LINK_MODE_xxx_BIT corresponding with
  * the connector type.
  *
  * If the port type is not known, returns %PORT_OTHER.
  */
 int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 		   unsigned long *support)
 {
 	int port;

 	/* port is the physical connector, set this from the connector field. */
 	switch (id->base.connector) {
 	case SFP_CONNECTOR_SC:
 	case SFP_CONNECTOR_FIBERJACK:
 	case SFP_CONNECTOR_LC:
 	case SFP_CONNECTOR_MT_RJ:
 	case SFP_CONNECTOR_MU:
 	case SFP_CONNECTOR_OPTICAL_PIGTAIL:
 		port = PORT_FIBRE;
 		break;

 	case SFP_CONNECTOR_RJ45:
 		port = PORT_TP;
 		break;

 	case SFP_CONNECTOR_COPPER_PIGTAIL:
 		port = PORT_DA;
 		break;

 	case SFP_CONNECTOR_UNSPEC:
 		if (id->base.e1000_base_t) {
 			port = PORT_TP;
 			break;
 		}
 		/* fallthrough */
 	case SFP_CONNECTOR_SG: /* guess */
 	case SFP_CONNECTOR_MPO_1X12:
 	case SFP_CONNECTOR_MPO_2X16:
 	case SFP_CONNECTOR_HSSDC_II:
 	case SFP_CONNECTOR_NOSEPARATE:
 	case SFP_CONNECTOR_MXC_2X16:
 		port = PORT_OTHER;
 		break;
 	default:
 		dev_warn(bus->sfp_dev, "SFP: unknown connector id 0x%02x\n",
 			 id->base.connector);
 		port = PORT_OTHER;
 		break;
 	}

 	if (support) {
 		switch (port) {
 		case PORT_FIBRE:
 			phylink_set(support, FIBRE);
 			break;

 		case PORT_TP:
 			phylink_set(support, TP);
 			break;
 		}
 	}

 	return port;
 }
 EXPORT_SYMBOL_GPL(sfp_parse_port);

 /**
  * sfp_parse_support() - Parse the eeprom id for supported link modes
  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
  * @id: a pointer to the module's &struct sfp_eeprom_id
  * @support: pointer to an array of unsigned long for the ethtool support mask
  *
  * Parse the EEPROM identification information and derive the supported
  * ethtool link modes for the module.
  */
 void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 		       unsigned long *support)
 {
 	unsigned int br_min, br_nom, br_max;
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(modes) = { 0, };

 	/* Decode the bitrate information to MBd */
 	br_min = br_nom = br_max = 0;
 	if (id->base.br_nominal) {
 		if (id->base.br_nominal != 255) {
 			br_nom = id->base.br_nominal * 100;
 			br_min = br_nom - id->base.br_nominal * id->ext.br_min;
 			br_max = br_nom + id->base.br_nominal * id->ext.br_max;
 		} else if (id->ext.br_max) {
 			br_nom = 250 * id->ext.br_max;
 			br_max = br_nom + br_nom * id->ext.br_min / 100;
 			br_min = br_nom - br_nom * id->ext.br_min / 100;
 		}

 		/* When using passive cables, in case neither BR,min nor BR,max
 		 * are specified, set br_min to 0 as the nominal value is then
 		 * used as the maximum.
 		 */
 		if (br_min == br_max && id->base.sfp_ct_passive)
 			br_min = 0;
 	}

 	/* Set ethtool support from the compliance fields. */
 	if (id->base.e10g_base_sr)
 		phylink_set(modes, 10000baseSR_Full);
 	if (id->base.e10g_base_lr)
 		phylink_set(modes, 10000baseLR_Full);
 	if (id->base.e10g_base_lrm)
 		phylink_set(modes, 10000baseLRM_Full);
 	if (id->base.e10g_base_er)
 		phylink_set(modes, 10000baseER_Full);
 	if (id->base.e1000_base_sx ||
 	    id->base.e1000_base_lx ||
 	    id->base.e1000_base_cx)
 		phylink_set(modes, 1000baseX_Full);
 	if (id->base.e1000_base_t) {
 		phylink_set(modes, 1000baseT_Half);
 		phylink_set(modes, 1000baseT_Full);
 	}

 	/* 1000Base-PX or 1000Base-BX10 */
 	if ((id->base.e_base_px || id->base.e_base_bx10) &&
 	    br_min <= 1300 && br_max >= 1200)
 		phylink_set(modes, 1000baseX_Full);

 	/* For active or passive cables, select the link modes
 	 * based on the bit rates and the cable compliance bytes.
 	 */
 	if ((id->base.sfp_ct_passive || id->base.sfp_ct_active) && br_nom) {
 		/* This may look odd, but some manufacturers use 12000MBd */
 		if (br_min <= 12000 && br_max >= 10300)
 			phylink_set(modes, 10000baseCR_Full);
 		if (br_min <= 3200 && br_max >= 3100)
 			phylink_set(modes, 2500baseX_Full);
 		if (br_min <= 1300 && br_max >= 1200)
 			phylink_set(modes, 1000baseX_Full);
 	}
 	if (id->base.sfp_ct_passive) {
 		if (id->base.passive.sff8431_app_e)
 			phylink_set(modes, 10000baseCR_Full);
 	}
 	if (id->base.sfp_ct_active) {
 		if (id->base.active.sff8431_app_e ||
 		    id->base.active.sff8431_lim) {
 			phylink_set(modes, 10000baseCR_Full);
 		}
 	}

 	switch (id->base.extended_cc) {
 	case 0x00: /* Unspecified */
 		break;
 	case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */
 		phylink_set(modes, 100000baseSR4_Full);
 		phylink_set(modes, 25000baseSR_Full);
 		break;
 	case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */
 	case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */
 		phylink_set(modes, 100000baseLR4_ER4_Full);
 		break;
 	case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */
 	case 0x0c: /* 25Gbase-CR CA-S */
 	case 0x0d: /* 25Gbase-CR CA-N */
 		phylink_set(modes, 100000baseCR4_Full);
 		phylink_set(modes, 25000baseCR_Full);
 		break;
 	default:
 		dev_warn(bus->sfp_dev,
 			 "Unknown/unsupported extended compliance code: 0x%02x\n",
 			 id->base.extended_cc);
 		break;
 	}

 	/* For fibre channel SFP, derive possible BaseX modes */
 	if (id->base.fc_speed_100 ||
 	    id->base.fc_speed_200 ||
 	    id->base.fc_speed_400) {
 		if (id->base.br_nominal >= 31)
 			phylink_set(modes, 2500baseX_Full);
 		if (id->base.br_nominal >= 12)
 			phylink_set(modes, 1000baseX_Full);
 	}

 	/* If we haven't discovered any modes that this module supports, try
 	 * the encoding and bitrate to determine supported modes. Some BiDi
 	 * modules (eg, 1310nm/1550nm) are not 1000BASE-BX compliant due to
 	 * the differing wavelengths, so do not set any transceiver bits.
 	 */
 	if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) {
 		/* If the encoding and bit rate allows 1000baseX */
 		if (id->base.encoding == SFP_ENCODING_8B10B && br_nom &&
 		    br_min <= 1300 && br_max >= 1200)
 			phylink_set(modes, 1000baseX_Full);
 	}

 	bitmap_or(support, support, modes, __ETHTOOL_LINK_MODE_MASK_NBITS);

 	phylink_set(support, Autoneg);
 	phylink_set(support, Pause);
 	phylink_set(support, Asym_Pause);
 }
 EXPORT_SYMBOL_GPL(sfp_parse_support);

 /**
  * sfp_select_interface() - Select appropriate phy_interface_t mode
  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
  * @id: a pointer to the module's &struct sfp_eeprom_id
  * @link_modes: ethtool link modes mask
  *
  * Derive the phy_interface_t mode for the information found in the
  * module's identifying EEPROM and the link modes mask. There is no
  * standard or defined way to derive this information, so we decide
  * based upon the link mode mask.
  */
 phy_interface_t sfp_select_interface(struct sfp_bus *bus,
 				     const struct sfp_eeprom_id *id,
 				     unsigned long *link_modes)
 {
 	if (phylink_test(link_modes, 10000baseCR_Full) ||
 	    phylink_test(link_modes, 10000baseSR_Full) ||
 	    phylink_test(link_modes, 10000baseLR_Full) ||
 	    phylink_test(link_modes, 10000baseLRM_Full) ||
 	    phylink_test(link_modes, 10000baseER_Full))
 		return PHY_INTERFACE_MODE_10GKR;

 	if (phylink_test(link_modes, 2500baseX_Full))
 		return PHY_INTERFACE_MODE_2500BASEX;

 	if (id->base.e1000_base_t ||
 	    id->base.e100_base_lx ||
 	    id->base.e100_base_fx)
 		return PHY_INTERFACE_MODE_SGMII;

 	if (phylink_test(link_modes, 1000baseX_Full))
 		return PHY_INTERFACE_MODE_1000BASEX;

 	dev_warn(bus->sfp_dev, "Unable to ascertain link mode\n");

 	return PHY_INTERFACE_MODE_NA;
 }
 EXPORT_SYMBOL_GPL(sfp_select_interface);

 static LIST_HEAD(sfp_buses);
 static DEFINE_MUTEX(sfp_mutex);

 static const struct sfp_upstream_ops *sfp_get_upstream_ops(struct sfp_bus *bus)
 {
 	return bus->registered ? bus->upstream_ops : NULL;
 }

 static struct sfp_bus *sfp_bus_get(struct fwnode_handle *fwnode)
 {
 	struct sfp_bus *sfp, *new, *found = NULL;

 	new = kzalloc(sizeof(*new), GFP_KERNEL);

 	mutex_lock(&sfp_mutex);

 	list_for_each_entry(sfp, &sfp_buses, node) {
 		if (sfp->fwnode == fwnode) {
 			kref_get(&sfp->kref);
 			found = sfp;
 			break;
 		}
 	}

 	if (!found && new) {
 		kref_init(&new->kref);
 		new->fwnode = fwnode;
 		list_add(&new->node, &sfp_buses);
 		found = new;
 		new = NULL;
 	}

 	mutex_unlock(&sfp_mutex);

 	kfree(new);

 	return found;
 }

 static void sfp_bus_release(struct kref *kref)
 {
 	struct sfp_bus *bus = container_of(kref, struct sfp_bus, kref);

 	list_del(&bus->node);
 	mutex_unlock(&sfp_mutex);
 	kfree(bus);
 }

 static void sfp_bus_put(struct sfp_bus *bus)
 {
 	kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
 }

 static int sfp_register_bus(struct sfp_bus *bus)
 {
 	const struct sfp_upstream_ops *ops = bus->upstream_ops;
 	int ret;

 	if (ops) {
 		if (ops->link_down)
 			ops->link_down(bus->upstream);
 		if (ops->connect_phy && bus->phydev) {
 			ret = ops->connect_phy(bus->upstream, bus->phydev);
 			if (ret)
 				return ret;
 		}
 	}
 	if (bus->started)
 		bus->socket_ops->start(bus->sfp);
 	bus->netdev->sfp_bus = bus;
 	bus->registered = true;
 	return 0;
 }

 static void sfp_unregister_bus(struct sfp_bus *bus)
 {
 	const struct sfp_upstream_ops *ops = bus->upstream_ops;

 	bus->netdev->sfp_bus = NULL;
 	if (bus->registered) {
 		if (bus->started)
 			bus->socket_ops->stop(bus->sfp);
 		if (bus->phydev && ops && ops->disconnect_phy)
 			ops->disconnect_phy(bus->upstream);
 	}
 	bus->registered = false;
 }

 /**
  * sfp_get_module_info() - Get the ethtool_modinfo for a SFP module
  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
  * @modinfo: a &struct ethtool_modinfo
  *
  * Fill in the type and eeprom_len parameters in @modinfo for a module on
  * the sfp bus specified by @bus.
  *
  * Returns 0 on success or a negative errno number.
  */
 int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo)
 {
 	return bus->socket_ops->module_info(bus->sfp, modinfo);
 }
 EXPORT_SYMBOL_GPL(sfp_get_module_info);

 /**
  * sfp_get_module_eeprom() - Read the SFP module EEPROM
  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
  * @ee: a &struct ethtool_eeprom
  * @data: buffer to contain the EEPROM data (must be at least @ee->len bytes)
  *
  * Read the EEPROM as specified by the supplied @ee. See the documentation
  * for &struct ethtool_eeprom for the region to be read.
  *
  * Returns 0 on success or a negative errno number.
  */
 int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee,
 			  u8 *data)
 {
 	return bus->socket_ops->module_eeprom(bus->sfp, ee, data);
 }
 EXPORT_SYMBOL_GPL(sfp_get_module_eeprom);

 /**
  * sfp_upstream_start() - Inform the SFP that the network device is up
  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
  *
  * Inform the SFP socket that the network device is now up, so that the
  * module can be enabled by allowing TX_DISABLE to be deasserted. This
  * should be called from the network device driver's &struct net_device_ops
  * ndo_open() method.
  */
 void sfp_upstream_start(struct sfp_bus *bus)
 {
 	if (bus->registered)
 		bus->socket_ops->start(bus->sfp);
 	bus->started = true;
 }
 EXPORT_SYMBOL_GPL(sfp_upstream_start);

 /**
  * sfp_upstream_stop() - Inform the SFP that the network device is down
  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
  *
  * Inform the SFP socket that the network device is now up, so that the
  * module can be disabled by asserting TX_DISABLE, disabling the laser
  * in optical modules. This should be called from the network device
  * driver's &struct net_device_ops ndo_stop() method.
  */
 void sfp_upstream_stop(struct sfp_bus *bus)
 {
 	if (bus->registered)
 		bus->socket_ops->stop(bus->sfp);
 	bus->started = false;
 }
 EXPORT_SYMBOL_GPL(sfp_upstream_stop);

 static void sfp_upstream_clear(struct sfp_bus *bus)
 {
 	bus->upstream_ops = NULL;
 	bus->upstream = NULL;
 	bus->netdev = NULL;
 }

 /**
  * sfp_register_upstream() - Register the neighbouring device
  * @fwnode: firmware node for the SFP bus
  * @ndev: network device associated with the interface
  * @upstream: the upstream private data
  * @ops: the upstream's &struct sfp_upstream_ops
  *
  * Register the upstream device (eg, PHY) with the SFP bus. MAC drivers
  * should use phylink, which will call this function for them. Returns
  * a pointer to the allocated &struct sfp_bus.
  *
  * On error, returns %NULL.
  */
 struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
 				      struct net_device *ndev, void *upstream,
 				      const struct sfp_upstream_ops *ops)
 {
 	struct sfp_bus *bus = sfp_bus_get(fwnode);
 	int ret = 0;

 	if (bus) {
 		rtnl_lock();
 		bus->upstream_ops = ops;
 		bus->upstream = upstream;
 		bus->netdev = ndev;

 		if (bus->sfp) {
 			ret = sfp_register_bus(bus);
 			if (ret)
 				sfp_upstream_clear(bus);
 		}
 		rtnl_unlock();
 	}

 	if (ret) {
 		sfp_bus_put(bus);
 		bus = NULL;
 	}

 	return bus;
 }
 EXPORT_SYMBOL_GPL(sfp_register_upstream);

 /**
  * sfp_unregister_upstream() - Unregister sfp bus
  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
  *
  * Unregister a previously registered upstream connection for the SFP
  * module. @bus is returned from sfp_register_upstream().
  */
 void sfp_unregister_upstream(struct sfp_bus *bus)
 {
 	rtnl_lock();
 	if (bus->sfp)
 		sfp_unregister_bus(bus);
 	sfp_upstream_clear(bus);
 	rtnl_unlock();

 	sfp_bus_put(bus);
 }
 EXPORT_SYMBOL_GPL(sfp_unregister_upstream);

 /* Socket driver entry points */
 int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev)
 {
 	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
 	int ret = 0;

 	if (ops && ops->connect_phy)
 		ret = ops->connect_phy(bus->upstream, phydev);

 	if (ret == 0)
 		bus->phydev = phydev;

 	return ret;
 }
 EXPORT_SYMBOL_GPL(sfp_add_phy);

 void sfp_remove_phy(struct sfp_bus *bus)
 {
 	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);

 	if (ops && ops->disconnect_phy)
 		ops->disconnect_phy(bus->upstream);
 	bus->phydev = NULL;
 }
 EXPORT_SYMBOL_GPL(sfp_remove_phy);

 void sfp_link_up(struct sfp_bus *bus)
 {
 	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);

 	if (ops && ops->link_up)
 		ops->link_up(bus->upstream);
 }
 EXPORT_SYMBOL_GPL(sfp_link_up);

 void sfp_link_down(struct sfp_bus *bus)
 {
 	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);

 	if (ops && ops->link_down)
 		ops->link_down(bus->upstream);
 }
 EXPORT_SYMBOL_GPL(sfp_link_down);

 int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id)
 {
 	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
 	int ret = 0;

 	if (ops && ops->module_insert)
 		ret = ops->module_insert(bus->upstream, id);

 	return ret;
 }
 EXPORT_SYMBOL_GPL(sfp_module_insert);

 void sfp_module_remove(struct sfp_bus *bus)
 {
 	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);

 	if (ops && ops->module_remove)
 		ops->module_remove(bus->upstream);
 }
 EXPORT_SYMBOL_GPL(sfp_module_remove);

 static void sfp_socket_clear(struct sfp_bus *bus)
 {
 	bus->sfp_dev = NULL;
 	bus->sfp = NULL;
 	bus->socket_ops = NULL;
 }

 struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp,
 				    const struct sfp_socket_ops *ops)
 {
 	struct sfp_bus *bus = sfp_bus_get(dev->fwnode);
 	int ret = 0;

 	if (bus) {
 		rtnl_lock();
 		bus->sfp_dev = dev;
 		bus->sfp = sfp;
 		bus->socket_ops = ops;

 		if (bus->netdev) {
 			ret = sfp_register_bus(bus);
 			if (ret)
 				sfp_socket_clear(bus);
 		}
 		rtnl_unlock();
 	}

 	if (ret) {
 		sfp_bus_put(bus);
 		bus = NULL;
 	}

 	return bus;
 }
 EXPORT_SYMBOL_GPL(sfp_register_socket);

 void sfp_unregister_socket(struct sfp_bus *bus)
 {
 	rtnl_lock();
 	if (bus->netdev)
 		sfp_unregister_bus(bus);
 	sfp_socket_clear(bus);
 	rtnl_unlock();

 	sfp_bus_put(bus);
 }
 EXPORT_SYMBOL_GPL(sfp_unregister_socket);
	#include <linux/export.h>
	#include <linux/kref.h>
	#include <linux/list.h>
	#include <linux/mutex.h>
	#include <linux/phylink.h>
	#include <linux/rtnetlink.h>
	#include <linux/slab.h>

	#include "sfp.h"

	/**
	* struct sfp_bus - internal representation of a sfp bus
	*/
	struct sfp_bus {
	/* private: */
	struct kref kref;
	struct list_head node;
	struct fwnode_handle *fwnode;

	const struct sfp_socket_ops *socket_ops;
	struct device *sfp_dev;
	struct sfp *sfp;

	const struct sfp_upstream_ops *upstream_ops;
	void *upstream;
	struct net_device *netdev;
	struct phy_device *phydev;

	bool registered;
	bool started;
	};

	/**
	* sfp_parse_port() - Parse the EEPROM base ID, setting the port type
	* @bus: a pointer to the &struct sfp_bus structure for the sfp module
	* @id: a pointer to the module's &struct sfp_eeprom_id
	* @support: optional pointer to an array of unsigned long for the
	* ethtool support mask
	*
	* Parse the EEPROM identification given in @id, and return one of
	* %PORT_TP, %PORT_FIBRE or %PORT_OTHER. If @support is non-%NULL,
	* also set the ethtool %ETHTOOL_LINK_MODE_xxx_BIT corresponding with
	* the connector type.
	*
	* If the port type is not known, returns %PORT_OTHER.
	*/
	int sfp_parse_port(struct sfp_bus bus, const struct sfp_eeprom_id id,
	unsigned long *support)
	{
	int port;

	/* port is the physical connector, set this from the connector field. */
	switch (id->base.connector) {
	case SFP_CONNECTOR_SC:
	case SFP_CONNECTOR_FIBERJACK:
	case SFP_CONNECTOR_LC:
	case SFP_CONNECTOR_MT_RJ:
	case SFP_CONNECTOR_MU:
	case SFP_CONNECTOR_OPTICAL_PIGTAIL:
	port = PORT_FIBRE;
	break;

	case SFP_CONNECTOR_RJ45:
	port = PORT_TP;
	break;

	case SFP_CONNECTOR_COPPER_PIGTAIL:
	port = PORT_DA;
	break;

	case SFP_CONNECTOR_UNSPEC:
	if (id->base.e1000_base_t) {
	port = PORT_TP;
	break;
	}
	/* fallthrough */
	case SFP_CONNECTOR_SG: /* guess */
	case SFP_CONNECTOR_MPO_1X12:
	case SFP_CONNECTOR_MPO_2X16:
	case SFP_CONNECTOR_HSSDC_II:
	case SFP_CONNECTOR_NOSEPARATE:
	case SFP_CONNECTOR_MXC_2X16:
	port = PORT_OTHER;
	break;
	default:
	dev_warn(bus->sfp_dev, "SFP: unknown connector id 0x%02x\n",
	id->base.connector);
	port = PORT_OTHER;
	break;
	}

	if (support) {
	switch (port) {
	case PORT_FIBRE:
	phylink_set(support, FIBRE);
	break;

	case PORT_TP:
	phylink_set(support, TP);
	break;
	}
	}

	return port;
	}
	EXPORT_SYMBOL_GPL(sfp_parse_port);

	/**
	* sfp_parse_support() - Parse the eeprom id for supported link modes
	* @bus: a pointer to the &struct sfp_bus structure for the sfp module
	* @id: a pointer to the module's &struct sfp_eeprom_id
	* @support: pointer to an array of unsigned long for the ethtool support mask
	*
	* Parse the EEPROM identification information and derive the supported
	* ethtool link modes for the module.
	*/
	void sfp_parse_support(struct sfp_bus bus, const struct sfp_eeprom_id id,
	unsigned long *support)
	{
	unsigned int br_min, br_nom, br_max;
	__ETHTOOL_DECLARE_LINK_MODE_MASK(modes) = { 0, };

	/* Decode the bitrate information to MBd */
	br_min = br_nom = br_max = 0;
	if (id->base.br_nominal) {
	if (id->base.br_nominal != 255) {
	br_nom = id->base.br_nominal * 100;
	br_min = br_nom - id->base.br_nominal * id->ext.br_min;
	br_max = br_nom + id->base.br_nominal * id->ext.br_max;
	} else if (id->ext.br_max) {
	br_nom = 250 * id->ext.br_max;
	br_max = br_nom + br_nom * id->ext.br_min / 100;
	br_min = br_nom - br_nom * id->ext.br_min / 100;
	}

	/* When using passive cables, in case neither BR,min nor BR,max
	* are specified, set br_min to 0 as the nominal value is then
	* used as the maximum.
	*/
	if (br_min == br_max && id->base.sfp_ct_passive)
	br_min = 0;
	}

	/* Set ethtool support from the compliance fields. */
	if (id->base.e10g_base_sr)
	phylink_set(modes, 10000baseSR_Full);
	if (id->base.e10g_base_lr)
	phylink_set(modes, 10000baseLR_Full);
	if (id->base.e10g_base_lrm)
	phylink_set(modes, 10000baseLRM_Full);
	if (id->base.e10g_base_er)
	phylink_set(modes, 10000baseER_Full);
	if (id->base.e1000_base_sx \|\|
	id->base.e1000_base_lx \|\|
	id->base.e1000_base_cx)
	phylink_set(modes, 1000baseX_Full);
	if (id->base.e1000_base_t) {
	phylink_set(modes, 1000baseT_Half);
	phylink_set(modes, 1000baseT_Full);
	}

	/* 1000Base-PX or 1000Base-BX10 */
	if ((id->base.e_base_px \|\| id->base.e_base_bx10) &&
	br_min <= 1300 && br_max >= 1200)
	phylink_set(modes, 1000baseX_Full);

	/* For active or passive cables, select the link modes
	* based on the bit rates and the cable compliance bytes.
	*/
	if ((id->base.sfp_ct_passive \|\| id->base.sfp_ct_active) && br_nom) {
	/* This may look odd, but some manufacturers use 12000MBd */
	if (br_min <= 12000 && br_max >= 10300)
	phylink_set(modes, 10000baseCR_Full);
	if (br_min <= 3200 && br_max >= 3100)
	phylink_set(modes, 2500baseX_Full);
	if (br_min <= 1300 && br_max >= 1200)
	phylink_set(modes, 1000baseX_Full);
	}
	if (id->base.sfp_ct_passive) {
	if (id->base.passive.sff8431_app_e)
	phylink_set(modes, 10000baseCR_Full);
	}
	if (id->base.sfp_ct_active) {
	if (id->base.active.sff8431_app_e \|\|
	id->base.active.sff8431_lim) {
	phylink_set(modes, 10000baseCR_Full);
	}
	}

	switch (id->base.extended_cc) {
	case 0x00: /* Unspecified */
	break;
	case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */
	phylink_set(modes, 100000baseSR4_Full);
	phylink_set(modes, 25000baseSR_Full);
	break;
	case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */
	case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */
	phylink_set(modes, 100000baseLR4_ER4_Full);
	break;
	case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */
	case 0x0c: /* 25Gbase-CR CA-S */
	case 0x0d: /* 25Gbase-CR CA-N */
	phylink_set(modes, 100000baseCR4_Full);
	phylink_set(modes, 25000baseCR_Full);
	break;
	default:
	dev_warn(bus->sfp_dev,
	"Unknown/unsupported extended compliance code: 0x%02x\n",
	id->base.extended_cc);
	break;
	}

	/* For fibre channel SFP, derive possible BaseX modes */
	if (id->base.fc_speed_100 \|\|
	id->base.fc_speed_200 \|\|
	id->base.fc_speed_400) {
	if (id->base.br_nominal >= 31)
	phylink_set(modes, 2500baseX_Full);
	if (id->base.br_nominal >= 12)
	phylink_set(modes, 1000baseX_Full);
	}

	/* If we haven't discovered any modes that this module supports, try
	* the encoding and bitrate to determine supported modes. Some BiDi
	* modules (eg, 1310nm/1550nm) are not 1000BASE-BX compliant due to
	* the differing wavelengths, so do not set any transceiver bits.
	*/
	if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) {
	/* If the encoding and bit rate allows 1000baseX */
	if (id->base.encoding == SFP_ENCODING_8B10B && br_nom &&
	br_min <= 1300 && br_max >= 1200)
	phylink_set(modes, 1000baseX_Full);
	}

	bitmap_or(support, support, modes, __ETHTOOL_LINK_MODE_MASK_NBITS);

	phylink_set(support, Autoneg);
	phylink_set(support, Pause);
	phylink_set(support, Asym_Pause);
	}
	EXPORT_SYMBOL_GPL(sfp_parse_support);

	/**
	* sfp_select_interface() - Select appropriate phy_interface_t mode
	* @bus: a pointer to the &struct sfp_bus structure for the sfp module
	* @id: a pointer to the module's &struct sfp_eeprom_id
	* @link_modes: ethtool link modes mask
	*
	* Derive the phy_interface_t mode for the information found in the
	* module's identifying EEPROM and the link modes mask. There is no
	* standard or defined way to derive this information, so we decide
	* based upon the link mode mask.
	*/
	phy_interface_t sfp_select_interface(struct sfp_bus *bus,
	const struct sfp_eeprom_id *id,
	unsigned long *link_modes)
	{
	if (phylink_test(link_modes, 10000baseCR_Full) \|\|
	phylink_test(link_modes, 10000baseSR_Full) \|\|
	phylink_test(link_modes, 10000baseLR_Full) \|\|
	phylink_test(link_modes, 10000baseLRM_Full) \|\|
	phylink_test(link_modes, 10000baseER_Full))
	return PHY_INTERFACE_MODE_10GKR;

	if (phylink_test(link_modes, 2500baseX_Full))
	return PHY_INTERFACE_MODE_2500BASEX;

	if (id->base.e1000_base_t \|\|
	id->base.e100_base_lx \|\|
	id->base.e100_base_fx)
	return PHY_INTERFACE_MODE_SGMII;

	if (phylink_test(link_modes, 1000baseX_Full))
	return PHY_INTERFACE_MODE_1000BASEX;

	dev_warn(bus->sfp_dev, "Unable to ascertain link mode\n");

	return PHY_INTERFACE_MODE_NA;
	}
	EXPORT_SYMBOL_GPL(sfp_select_interface);

	static LIST_HEAD(sfp_buses);
	static DEFINE_MUTEX(sfp_mutex);

	static const struct sfp_upstream_ops sfp_get_upstream_ops(struct sfp_bus bus)
	{
	return bus->registered ? bus->upstream_ops : NULL;
	}

	static struct sfp_bus sfp_bus_get(struct fwnode_handle fwnode)
	{
	struct sfp_bus sfp, new, *found = NULL;

	new = kzalloc(sizeof(*new), GFP_KERNEL);

	mutex_lock(&sfp_mutex);

	list_for_each_entry(sfp, &sfp_buses, node) {
	if (sfp->fwnode == fwnode) {
	kref_get(&sfp->kref);
	found = sfp;
	break;
	}
	}

	if (!found && new) {
	kref_init(&new->kref);
	new->fwnode = fwnode;
	list_add(&new->node, &sfp_buses);
	found = new;
	new = NULL;
	}

	mutex_unlock(&sfp_mutex);

	kfree(new);

	return found;
	}

	static void sfp_bus_release(struct kref *kref)
	{
	struct sfp_bus *bus = container_of(kref, struct sfp_bus, kref);

	list_del(&bus->node);
	mutex_unlock(&sfp_mutex);
	kfree(bus);
	}

	static void sfp_bus_put(struct sfp_bus *bus)
	{
	kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
	}

	static int sfp_register_bus(struct sfp_bus *bus)
	{
	const struct sfp_upstream_ops *ops = bus->upstream_ops;
	int ret;

	if (ops) {
	if (ops->link_down)
	ops->link_down(bus->upstream);
	if (ops->connect_phy && bus->phydev) {
	ret = ops->connect_phy(bus->upstream, bus->phydev);
	if (ret)
	return ret;
	}
	}
	if (bus->started)
	bus->socket_ops->start(bus->sfp);
	bus->netdev->sfp_bus = bus;
	bus->registered = true;
	return 0;
	}

	static void sfp_unregister_bus(struct sfp_bus *bus)
	{
	const struct sfp_upstream_ops *ops = bus->upstream_ops;

	bus->netdev->sfp_bus = NULL;
	if (bus->registered) {
	if (bus->started)
	bus->socket_ops->stop(bus->sfp);
	if (bus->phydev && ops && ops->disconnect_phy)
	ops->disconnect_phy(bus->upstream);
	}
	bus->registered = false;
	}

	/**
	* sfp_get_module_info() - Get the ethtool_modinfo for a SFP module
	* @bus: a pointer to the &struct sfp_bus structure for the sfp module
	* @modinfo: a &struct ethtool_modinfo
	*
	* Fill in the type and eeprom_len parameters in @modinfo for a module on
	* the sfp bus specified by @bus.
	*
	* Returns 0 on success or a negative errno number.
	*/
	int sfp_get_module_info(struct sfp_bus bus, struct ethtool_modinfo modinfo)
	{
	return bus->socket_ops->module_info(bus->sfp, modinfo);
	}
	EXPORT_SYMBOL_GPL(sfp_get_module_info);

	/**
	* sfp_get_module_eeprom() - Read the SFP module EEPROM
	* @bus: a pointer to the &struct sfp_bus structure for the sfp module
	* @ee: a &struct ethtool_eeprom
	* @data: buffer to contain the EEPROM data (must be at least @ee->len bytes)
	*
	* Read the EEPROM as specified by the supplied @ee. See the documentation
	* for &struct ethtool_eeprom for the region to be read.
	*
	* Returns 0 on success or a negative errno number.
	*/
	int sfp_get_module_eeprom(struct sfp_bus bus, struct ethtool_eeprom ee,
	u8 *data)
	{
	return bus->socket_ops->module_eeprom(bus->sfp, ee, data);
	}
	EXPORT_SYMBOL_GPL(sfp_get_module_eeprom);

	/**
	* sfp_upstream_start() - Inform the SFP that the network device is up
	* @bus: a pointer to the &struct sfp_bus structure for the sfp module
	*
	* Inform the SFP socket that the network device is now up, so that the
	* module can be enabled by allowing TX_DISABLE to be deasserted. This
	* should be called from the network device driver's &struct net_device_ops
	* ndo_open() method.
	*/
	void sfp_upstream_start(struct sfp_bus *bus)
	{
	if (bus->registered)
	bus->socket_ops->start(bus->sfp);
	bus->started = true;
	}
	EXPORT_SYMBOL_GPL(sfp_upstream_start);

	/**
	* sfp_upstream_stop() - Inform the SFP that the network device is down
	* @bus: a pointer to the &struct sfp_bus structure for the sfp module
	*
	* Inform the SFP socket that the network device is now up, so that the
	* module can be disabled by asserting TX_DISABLE, disabling the laser
	* in optical modules. This should be called from the network device
	* driver's &struct net_device_ops ndo_stop() method.
	*/
	void sfp_upstream_stop(struct sfp_bus *bus)
	{
	if (bus->registered)
	bus->socket_ops->stop(bus->sfp);
	bus->started = false;
	}
	EXPORT_SYMBOL_GPL(sfp_upstream_stop);

	static void sfp_upstream_clear(struct sfp_bus *bus)
	{
	bus->upstream_ops = NULL;
	bus->upstream = NULL;
	bus->netdev = NULL;
	}

	/**
	* sfp_register_upstream() - Register the neighbouring device
	* @fwnode: firmware node for the SFP bus
	* @ndev: network device associated with the interface
	* @upstream: the upstream private data
	* @ops: the upstream's &struct sfp_upstream_ops
	*
	* Register the upstream device (eg, PHY) with the SFP bus. MAC drivers
	* should use phylink, which will call this function for them. Returns
	* a pointer to the allocated &struct sfp_bus.
	*
	* On error, returns %NULL.
	*/
	struct sfp_bus sfp_register_upstream(struct fwnode_handle fwnode,
	struct net_device ndev, void upstream,
	const struct sfp_upstream_ops *ops)
	{
	struct sfp_bus *bus = sfp_bus_get(fwnode);
	int ret = 0;

	if (bus) {
	rtnl_lock();
	bus->upstream_ops = ops;
	bus->upstream = upstream;
	bus->netdev = ndev;

	if (bus->sfp) {
	ret = sfp_register_bus(bus);
	if (ret)
	sfp_upstream_clear(bus);
	}
	rtnl_unlock();
	}

	if (ret) {
	sfp_bus_put(bus);
	bus = NULL;
	}

	return bus;
	}
	EXPORT_SYMBOL_GPL(sfp_register_upstream);

	/**
	* sfp_unregister_upstream() - Unregister sfp bus
	* @bus: a pointer to the &struct sfp_bus structure for the sfp module
	*
	* Unregister a previously registered upstream connection for the SFP
	* module. @bus is returned from sfp_register_upstream().
	*/
	void sfp_unregister_upstream(struct sfp_bus *bus)
	{
	rtnl_lock();
	if (bus->sfp)
	sfp_unregister_bus(bus);
	sfp_upstream_clear(bus);
	rtnl_unlock();

	sfp_bus_put(bus);
	}
	EXPORT_SYMBOL_GPL(sfp_unregister_upstream);

	/* Socket driver entry points */
	int sfp_add_phy(struct sfp_bus bus, struct phy_device phydev)
	{
	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
	int ret = 0;

	if (ops && ops->connect_phy)
	ret = ops->connect_phy(bus->upstream, phydev);

	if (ret == 0)
	bus->phydev = phydev;

	return ret;
	}
	EXPORT_SYMBOL_GPL(sfp_add_phy);

	void sfp_remove_phy(struct sfp_bus *bus)
	{
	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);

	if (ops && ops->disconnect_phy)
	ops->disconnect_phy(bus->upstream);
	bus->phydev = NULL;
	}
	EXPORT_SYMBOL_GPL(sfp_remove_phy);

	void sfp_link_up(struct sfp_bus *bus)
	{
	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);

	if (ops && ops->link_up)
	ops->link_up(bus->upstream);
	}
	EXPORT_SYMBOL_GPL(sfp_link_up);

	void sfp_link_down(struct sfp_bus *bus)
	{
	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);

	if (ops && ops->link_down)
	ops->link_down(bus->upstream);
	}
	EXPORT_SYMBOL_GPL(sfp_link_down);

	int sfp_module_insert(struct sfp_bus bus, const struct sfp_eeprom_id id)
	{
	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
	int ret = 0;

	if (ops && ops->module_insert)
	ret = ops->module_insert(bus->upstream, id);

	return ret;
	}
	EXPORT_SYMBOL_GPL(sfp_module_insert);

	void sfp_module_remove(struct sfp_bus *bus)
	{
	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);

	if (ops && ops->module_remove)
	ops->module_remove(bus->upstream);
	}
	EXPORT_SYMBOL_GPL(sfp_module_remove);

	static void sfp_socket_clear(struct sfp_bus *bus)
	{
	bus->sfp_dev = NULL;
	bus->sfp = NULL;
	bus->socket_ops = NULL;
	}

	struct sfp_bus sfp_register_socket(struct device dev, struct sfp *sfp,
	const struct sfp_socket_ops *ops)
	{
	struct sfp_bus *bus = sfp_bus_get(dev->fwnode);
	int ret = 0;

	if (bus) {
	rtnl_lock();
	bus->sfp_dev = dev;
	bus->sfp = sfp;
	bus->socket_ops = ops;

	if (bus->netdev) {
	ret = sfp_register_bus(bus);
	if (ret)
	sfp_socket_clear(bus);
	}
	rtnl_unlock();
	}

	if (ret) {
	sfp_bus_put(bus);
	bus = NULL;
	}

	return bus;
	}
	EXPORT_SYMBOL_GPL(sfp_register_socket);

	void sfp_unregister_socket(struct sfp_bus *bus)
	{
	rtnl_lock();
	if (bus->netdev)
	sfp_unregister_bus(bus);
	sfp_socket_clear(bus);
	rtnl_unlock();

	sfp_bus_put(bus);
	}
	EXPORT_SYMBOL_GPL(sfp_unregister_socket);