| /* |
| * Generic DSI Command Mode panel driver |
| * |
| * Copyright (C) 2013 Texas Instruments |
| * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| */ |
| |
| /* #define DEBUG */ |
| |
| #include <linux/backlight.h> |
| #include <linux/delay.h> |
| #include <linux/fb.h> |
| #include <linux/gpio.h> |
| #include <linux/interrupt.h> |
| #include <linux/jiffies.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| |
| #include <video/omapfb_dss.h> |
| #include <video/mipi_display.h> |
| |
| /* DSI Virtual channel. Hardcoded for now. */ |
| #define TCH 0 |
| |
| #define DCS_READ_NUM_ERRORS 0x05 |
| #define DCS_BRIGHTNESS 0x51 |
| #define DCS_CTRL_DISPLAY 0x53 |
| #define DCS_GET_ID1 0xda |
| #define DCS_GET_ID2 0xdb |
| #define DCS_GET_ID3 0xdc |
| |
| struct panel_drv_data { |
| struct omap_dss_device dssdev; |
| struct omap_dss_device *in; |
| |
| struct omap_video_timings timings; |
| |
| struct platform_device *pdev; |
| |
| struct mutex lock; |
| |
| struct backlight_device *bldev; |
| |
| unsigned long hw_guard_end; /* next value of jiffies when we can |
| * issue the next sleep in/out command |
| */ |
| unsigned long hw_guard_wait; /* max guard time in jiffies */ |
| |
| /* panel HW configuration from DT or platform data */ |
| int reset_gpio; |
| int ext_te_gpio; |
| |
| bool use_dsi_backlight; |
| |
| struct omap_dsi_pin_config pin_config; |
| |
| /* runtime variables */ |
| bool enabled; |
| |
| bool te_enabled; |
| |
| atomic_t do_update; |
| int channel; |
| |
| struct delayed_work te_timeout_work; |
| |
| bool intro_printed; |
| |
| struct workqueue_struct *workqueue; |
| |
| bool ulps_enabled; |
| unsigned ulps_timeout; |
| struct delayed_work ulps_work; |
| }; |
| |
| #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) |
| |
| static irqreturn_t dsicm_te_isr(int irq, void *data); |
| static void dsicm_te_timeout_work_callback(struct work_struct *work); |
| static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable); |
| |
| static int dsicm_panel_reset(struct panel_drv_data *ddata); |
| |
| static void dsicm_ulps_work(struct work_struct *work); |
| |
| static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec) |
| { |
| ddata->hw_guard_wait = msecs_to_jiffies(guard_msec); |
| ddata->hw_guard_end = jiffies + ddata->hw_guard_wait; |
| } |
| |
| static void hw_guard_wait(struct panel_drv_data *ddata) |
| { |
| unsigned long wait = ddata->hw_guard_end - jiffies; |
| |
| if ((long)wait > 0 && wait <= ddata->hw_guard_wait) { |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| schedule_timeout(wait); |
| } |
| } |
| |
| static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data) |
| { |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| u8 buf[1]; |
| |
| r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, buf, 1); |
| |
| if (r < 0) |
| return r; |
| |
| *data = buf[0]; |
| |
| return 0; |
| } |
| |
| static int dsicm_dcs_write_0(struct panel_drv_data *ddata, u8 dcs_cmd) |
| { |
| struct omap_dss_device *in = ddata->in; |
| return in->ops.dsi->dcs_write(in, ddata->channel, &dcs_cmd, 1); |
| } |
| |
| static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param) |
| { |
| struct omap_dss_device *in = ddata->in; |
| u8 buf[2] = { dcs_cmd, param }; |
| |
| return in->ops.dsi->dcs_write(in, ddata->channel, buf, 2); |
| } |
| |
| static int dsicm_sleep_in(struct panel_drv_data *ddata) |
| |
| { |
| struct omap_dss_device *in = ddata->in; |
| u8 cmd; |
| int r; |
| |
| hw_guard_wait(ddata); |
| |
| cmd = MIPI_DCS_ENTER_SLEEP_MODE; |
| r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, &cmd, 1); |
| if (r) |
| return r; |
| |
| hw_guard_start(ddata, 120); |
| |
| usleep_range(5000, 10000); |
| |
| return 0; |
| } |
| |
| static int dsicm_sleep_out(struct panel_drv_data *ddata) |
| { |
| int r; |
| |
| hw_guard_wait(ddata); |
| |
| r = dsicm_dcs_write_0(ddata, MIPI_DCS_EXIT_SLEEP_MODE); |
| if (r) |
| return r; |
| |
| hw_guard_start(ddata, 120); |
| |
| usleep_range(5000, 10000); |
| |
| return 0; |
| } |
| |
| static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3) |
| { |
| int r; |
| |
| r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1); |
| if (r) |
| return r; |
| r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2); |
| if (r) |
| return r; |
| r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3); |
| if (r) |
| return r; |
| |
| return 0; |
| } |
| |
| static int dsicm_set_update_window(struct panel_drv_data *ddata, |
| u16 x, u16 y, u16 w, u16 h) |
| { |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| u16 x1 = x; |
| u16 x2 = x + w - 1; |
| u16 y1 = y; |
| u16 y2 = y + h - 1; |
| |
| u8 buf[5]; |
| buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS; |
| buf[1] = (x1 >> 8) & 0xff; |
| buf[2] = (x1 >> 0) & 0xff; |
| buf[3] = (x2 >> 8) & 0xff; |
| buf[4] = (x2 >> 0) & 0xff; |
| |
| r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf)); |
| if (r) |
| return r; |
| |
| buf[0] = MIPI_DCS_SET_PAGE_ADDRESS; |
| buf[1] = (y1 >> 8) & 0xff; |
| buf[2] = (y1 >> 0) & 0xff; |
| buf[3] = (y2 >> 8) & 0xff; |
| buf[4] = (y2 >> 0) & 0xff; |
| |
| r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf)); |
| if (r) |
| return r; |
| |
| in->ops.dsi->bta_sync(in, ddata->channel); |
| |
| return r; |
| } |
| |
| static void dsicm_queue_ulps_work(struct panel_drv_data *ddata) |
| { |
| if (ddata->ulps_timeout > 0) |
| queue_delayed_work(ddata->workqueue, &ddata->ulps_work, |
| msecs_to_jiffies(ddata->ulps_timeout)); |
| } |
| |
| static void dsicm_cancel_ulps_work(struct panel_drv_data *ddata) |
| { |
| cancel_delayed_work(&ddata->ulps_work); |
| } |
| |
| static int dsicm_enter_ulps(struct panel_drv_data *ddata) |
| { |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (ddata->ulps_enabled) |
| return 0; |
| |
| dsicm_cancel_ulps_work(ddata); |
| |
| r = _dsicm_enable_te(ddata, false); |
| if (r) |
| goto err; |
| |
| if (gpio_is_valid(ddata->ext_te_gpio)) |
| disable_irq(gpio_to_irq(ddata->ext_te_gpio)); |
| |
| in->ops.dsi->disable(in, false, true); |
| |
| ddata->ulps_enabled = true; |
| |
| return 0; |
| |
| err: |
| dev_err(&ddata->pdev->dev, "enter ULPS failed"); |
| dsicm_panel_reset(ddata); |
| |
| ddata->ulps_enabled = false; |
| |
| dsicm_queue_ulps_work(ddata); |
| |
| return r; |
| } |
| |
| static int dsicm_exit_ulps(struct panel_drv_data *ddata) |
| { |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (!ddata->ulps_enabled) |
| return 0; |
| |
| r = in->ops.dsi->enable(in); |
| if (r) { |
| dev_err(&ddata->pdev->dev, "failed to enable DSI\n"); |
| goto err1; |
| } |
| |
| in->ops.dsi->enable_hs(in, ddata->channel, true); |
| |
| r = _dsicm_enable_te(ddata, true); |
| if (r) { |
| dev_err(&ddata->pdev->dev, "failed to re-enable TE"); |
| goto err2; |
| } |
| |
| if (gpio_is_valid(ddata->ext_te_gpio)) |
| enable_irq(gpio_to_irq(ddata->ext_te_gpio)); |
| |
| dsicm_queue_ulps_work(ddata); |
| |
| ddata->ulps_enabled = false; |
| |
| return 0; |
| |
| err2: |
| dev_err(&ddata->pdev->dev, "failed to exit ULPS"); |
| |
| r = dsicm_panel_reset(ddata); |
| if (!r) { |
| if (gpio_is_valid(ddata->ext_te_gpio)) |
| enable_irq(gpio_to_irq(ddata->ext_te_gpio)); |
| ddata->ulps_enabled = false; |
| } |
| err1: |
| dsicm_queue_ulps_work(ddata); |
| |
| return r; |
| } |
| |
| static int dsicm_wake_up(struct panel_drv_data *ddata) |
| { |
| if (ddata->ulps_enabled) |
| return dsicm_exit_ulps(ddata); |
| |
| dsicm_cancel_ulps_work(ddata); |
| dsicm_queue_ulps_work(ddata); |
| return 0; |
| } |
| |
| static int dsicm_bl_update_status(struct backlight_device *dev) |
| { |
| struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| int level; |
| |
| if (dev->props.fb_blank == FB_BLANK_UNBLANK && |
| dev->props.power == FB_BLANK_UNBLANK) |
| level = dev->props.brightness; |
| else |
| level = 0; |
| |
| dev_dbg(&ddata->pdev->dev, "update brightness to %d\n", level); |
| |
| mutex_lock(&ddata->lock); |
| |
| if (ddata->enabled) { |
| in->ops.dsi->bus_lock(in); |
| |
| r = dsicm_wake_up(ddata); |
| if (!r) |
| r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, level); |
| |
| in->ops.dsi->bus_unlock(in); |
| } else { |
| r = 0; |
| } |
| |
| mutex_unlock(&ddata->lock); |
| |
| return r; |
| } |
| |
| static int dsicm_bl_get_intensity(struct backlight_device *dev) |
| { |
| if (dev->props.fb_blank == FB_BLANK_UNBLANK && |
| dev->props.power == FB_BLANK_UNBLANK) |
| return dev->props.brightness; |
| |
| return 0; |
| } |
| |
| static const struct backlight_ops dsicm_bl_ops = { |
| .get_brightness = dsicm_bl_get_intensity, |
| .update_status = dsicm_bl_update_status, |
| }; |
| |
| static void dsicm_get_resolution(struct omap_dss_device *dssdev, |
| u16 *xres, u16 *yres) |
| { |
| *xres = dssdev->panel.timings.x_res; |
| *yres = dssdev->panel.timings.y_res; |
| } |
| |
| static ssize_t dsicm_num_errors_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *in = ddata->in; |
| u8 errors = 0; |
| int r; |
| |
| mutex_lock(&ddata->lock); |
| |
| if (ddata->enabled) { |
| in->ops.dsi->bus_lock(in); |
| |
| r = dsicm_wake_up(ddata); |
| if (!r) |
| r = dsicm_dcs_read_1(ddata, DCS_READ_NUM_ERRORS, |
| &errors); |
| |
| in->ops.dsi->bus_unlock(in); |
| } else { |
| r = -ENODEV; |
| } |
| |
| mutex_unlock(&ddata->lock); |
| |
| if (r) |
| return r; |
| |
| return snprintf(buf, PAGE_SIZE, "%d\n", errors); |
| } |
| |
| static ssize_t dsicm_hw_revision_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *in = ddata->in; |
| u8 id1, id2, id3; |
| int r; |
| |
| mutex_lock(&ddata->lock); |
| |
| if (ddata->enabled) { |
| in->ops.dsi->bus_lock(in); |
| |
| r = dsicm_wake_up(ddata); |
| if (!r) |
| r = dsicm_get_id(ddata, &id1, &id2, &id3); |
| |
| in->ops.dsi->bus_unlock(in); |
| } else { |
| r = -ENODEV; |
| } |
| |
| mutex_unlock(&ddata->lock); |
| |
| if (r) |
| return r; |
| |
| return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3); |
| } |
| |
| static ssize_t dsicm_store_ulps(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *in = ddata->in; |
| unsigned long t; |
| int r; |
| |
| r = kstrtoul(buf, 0, &t); |
| if (r) |
| return r; |
| |
| mutex_lock(&ddata->lock); |
| |
| if (ddata->enabled) { |
| in->ops.dsi->bus_lock(in); |
| |
| if (t) |
| r = dsicm_enter_ulps(ddata); |
| else |
| r = dsicm_wake_up(ddata); |
| |
| in->ops.dsi->bus_unlock(in); |
| } |
| |
| mutex_unlock(&ddata->lock); |
| |
| if (r) |
| return r; |
| |
| return count; |
| } |
| |
| static ssize_t dsicm_show_ulps(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| unsigned t; |
| |
| mutex_lock(&ddata->lock); |
| t = ddata->ulps_enabled; |
| mutex_unlock(&ddata->lock); |
| |
| return snprintf(buf, PAGE_SIZE, "%u\n", t); |
| } |
| |
| static ssize_t dsicm_store_ulps_timeout(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *in = ddata->in; |
| unsigned long t; |
| int r; |
| |
| r = kstrtoul(buf, 0, &t); |
| if (r) |
| return r; |
| |
| mutex_lock(&ddata->lock); |
| ddata->ulps_timeout = t; |
| |
| if (ddata->enabled) { |
| /* dsicm_wake_up will restart the timer */ |
| in->ops.dsi->bus_lock(in); |
| r = dsicm_wake_up(ddata); |
| in->ops.dsi->bus_unlock(in); |
| } |
| |
| mutex_unlock(&ddata->lock); |
| |
| if (r) |
| return r; |
| |
| return count; |
| } |
| |
| static ssize_t dsicm_show_ulps_timeout(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| unsigned t; |
| |
| mutex_lock(&ddata->lock); |
| t = ddata->ulps_timeout; |
| mutex_unlock(&ddata->lock); |
| |
| return snprintf(buf, PAGE_SIZE, "%u\n", t); |
| } |
| |
| static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL); |
| static DEVICE_ATTR(hw_revision, S_IRUGO, dsicm_hw_revision_show, NULL); |
| static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR, |
| dsicm_show_ulps, dsicm_store_ulps); |
| static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR, |
| dsicm_show_ulps_timeout, dsicm_store_ulps_timeout); |
| |
| static struct attribute *dsicm_attrs[] = { |
| &dev_attr_num_dsi_errors.attr, |
| &dev_attr_hw_revision.attr, |
| &dev_attr_ulps.attr, |
| &dev_attr_ulps_timeout.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group dsicm_attr_group = { |
| .attrs = dsicm_attrs, |
| }; |
| |
| static void dsicm_hw_reset(struct panel_drv_data *ddata) |
| { |
| if (!gpio_is_valid(ddata->reset_gpio)) |
| return; |
| |
| gpio_set_value(ddata->reset_gpio, 1); |
| udelay(10); |
| /* reset the panel */ |
| gpio_set_value(ddata->reset_gpio, 0); |
| /* assert reset */ |
| udelay(10); |
| gpio_set_value(ddata->reset_gpio, 1); |
| /* wait after releasing reset */ |
| usleep_range(5000, 10000); |
| } |
| |
| static int dsicm_power_on(struct panel_drv_data *ddata) |
| { |
| struct omap_dss_device *in = ddata->in; |
| u8 id1, id2, id3; |
| int r; |
| struct omap_dss_dsi_config dsi_config = { |
| .mode = OMAP_DSS_DSI_CMD_MODE, |
| .pixel_format = OMAP_DSS_DSI_FMT_RGB888, |
| .timings = &ddata->timings, |
| .hs_clk_min = 150000000, |
| .hs_clk_max = 300000000, |
| .lp_clk_min = 7000000, |
| .lp_clk_max = 10000000, |
| }; |
| |
| if (ddata->pin_config.num_pins > 0) { |
| r = in->ops.dsi->configure_pins(in, &ddata->pin_config); |
| if (r) { |
| dev_err(&ddata->pdev->dev, |
| "failed to configure DSI pins\n"); |
| goto err0; |
| } |
| } |
| |
| r = in->ops.dsi->set_config(in, &dsi_config); |
| if (r) { |
| dev_err(&ddata->pdev->dev, "failed to configure DSI\n"); |
| goto err0; |
| } |
| |
| r = in->ops.dsi->enable(in); |
| if (r) { |
| dev_err(&ddata->pdev->dev, "failed to enable DSI\n"); |
| goto err0; |
| } |
| |
| dsicm_hw_reset(ddata); |
| |
| in->ops.dsi->enable_hs(in, ddata->channel, false); |
| |
| r = dsicm_sleep_out(ddata); |
| if (r) |
| goto err; |
| |
| r = dsicm_get_id(ddata, &id1, &id2, &id3); |
| if (r) |
| goto err; |
| |
| r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff); |
| if (r) |
| goto err; |
| |
| r = dsicm_dcs_write_1(ddata, DCS_CTRL_DISPLAY, |
| (1<<2) | (1<<5)); /* BL | BCTRL */ |
| if (r) |
| goto err; |
| |
| r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_PIXEL_FORMAT, |
| MIPI_DCS_PIXEL_FMT_24BIT); |
| if (r) |
| goto err; |
| |
| r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_ON); |
| if (r) |
| goto err; |
| |
| r = _dsicm_enable_te(ddata, ddata->te_enabled); |
| if (r) |
| goto err; |
| |
| r = in->ops.dsi->enable_video_output(in, ddata->channel); |
| if (r) |
| goto err; |
| |
| ddata->enabled = 1; |
| |
| if (!ddata->intro_printed) { |
| dev_info(&ddata->pdev->dev, "panel revision %02x.%02x.%02x\n", |
| id1, id2, id3); |
| ddata->intro_printed = true; |
| } |
| |
| in->ops.dsi->enable_hs(in, ddata->channel, true); |
| |
| return 0; |
| err: |
| dev_err(&ddata->pdev->dev, "error while enabling panel, issuing HW reset\n"); |
| |
| dsicm_hw_reset(ddata); |
| |
| in->ops.dsi->disable(in, true, false); |
| err0: |
| return r; |
| } |
| |
| static void dsicm_power_off(struct panel_drv_data *ddata) |
| { |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| in->ops.dsi->disable_video_output(in, ddata->channel); |
| |
| r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_OFF); |
| if (!r) |
| r = dsicm_sleep_in(ddata); |
| |
| if (r) { |
| dev_err(&ddata->pdev->dev, |
| "error disabling panel, issuing HW reset\n"); |
| dsicm_hw_reset(ddata); |
| } |
| |
| in->ops.dsi->disable(in, true, false); |
| |
| ddata->enabled = 0; |
| } |
| |
| static int dsicm_panel_reset(struct panel_drv_data *ddata) |
| { |
| dev_err(&ddata->pdev->dev, "performing LCD reset\n"); |
| |
| dsicm_power_off(ddata); |
| dsicm_hw_reset(ddata); |
| return dsicm_power_on(ddata); |
| } |
| |
| static int dsicm_connect(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| struct device *dev = &ddata->pdev->dev; |
| int r; |
| |
| if (omapdss_device_is_connected(dssdev)) |
| return 0; |
| |
| r = in->ops.dsi->connect(in, dssdev); |
| if (r) { |
| dev_err(dev, "Failed to connect to video source\n"); |
| return r; |
| } |
| |
| r = in->ops.dsi->request_vc(ddata->in, &ddata->channel); |
| if (r) { |
| dev_err(dev, "failed to get virtual channel\n"); |
| goto err_req_vc; |
| } |
| |
| r = in->ops.dsi->set_vc_id(ddata->in, ddata->channel, TCH); |
| if (r) { |
| dev_err(dev, "failed to set VC_ID\n"); |
| goto err_vc_id; |
| } |
| |
| return 0; |
| |
| err_vc_id: |
| in->ops.dsi->release_vc(ddata->in, ddata->channel); |
| err_req_vc: |
| in->ops.dsi->disconnect(in, dssdev); |
| return r; |
| } |
| |
| static void dsicm_disconnect(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| if (!omapdss_device_is_connected(dssdev)) |
| return; |
| |
| in->ops.dsi->release_vc(in, ddata->channel); |
| in->ops.dsi->disconnect(in, dssdev); |
| } |
| |
| static int dsicm_enable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| dev_dbg(&ddata->pdev->dev, "enable\n"); |
| |
| mutex_lock(&ddata->lock); |
| |
| if (!omapdss_device_is_connected(dssdev)) { |
| r = -ENODEV; |
| goto err; |
| } |
| |
| if (omapdss_device_is_enabled(dssdev)) { |
| r = 0; |
| goto err; |
| } |
| |
| in->ops.dsi->bus_lock(in); |
| |
| r = dsicm_power_on(ddata); |
| |
| in->ops.dsi->bus_unlock(in); |
| |
| if (r) |
| goto err; |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| |
| mutex_unlock(&ddata->lock); |
| |
| return 0; |
| err: |
| dev_dbg(&ddata->pdev->dev, "enable failed\n"); |
| mutex_unlock(&ddata->lock); |
| return r; |
| } |
| |
| static void dsicm_disable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| dev_dbg(&ddata->pdev->dev, "disable\n"); |
| |
| mutex_lock(&ddata->lock); |
| |
| dsicm_cancel_ulps_work(ddata); |
| |
| in->ops.dsi->bus_lock(in); |
| |
| if (omapdss_device_is_enabled(dssdev)) { |
| r = dsicm_wake_up(ddata); |
| if (!r) |
| dsicm_power_off(ddata); |
| } |
| |
| in->ops.dsi->bus_unlock(in); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| |
| mutex_unlock(&ddata->lock); |
| } |
| |
| static void dsicm_framedone_cb(int err, void *data) |
| { |
| struct panel_drv_data *ddata = data; |
| struct omap_dss_device *in = ddata->in; |
| |
| dev_dbg(&ddata->pdev->dev, "framedone, err %d\n", err); |
| in->ops.dsi->bus_unlock(ddata->in); |
| } |
| |
| static irqreturn_t dsicm_te_isr(int irq, void *data) |
| { |
| struct panel_drv_data *ddata = data; |
| struct omap_dss_device *in = ddata->in; |
| int old; |
| int r; |
| |
| old = atomic_cmpxchg(&ddata->do_update, 1, 0); |
| |
| if (old) { |
| cancel_delayed_work(&ddata->te_timeout_work); |
| |
| r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb, |
| ddata); |
| if (r) |
| goto err; |
| } |
| |
| return IRQ_HANDLED; |
| err: |
| dev_err(&ddata->pdev->dev, "start update failed\n"); |
| in->ops.dsi->bus_unlock(in); |
| return IRQ_HANDLED; |
| } |
| |
| static void dsicm_te_timeout_work_callback(struct work_struct *work) |
| { |
| struct panel_drv_data *ddata = container_of(work, struct panel_drv_data, |
| te_timeout_work.work); |
| struct omap_dss_device *in = ddata->in; |
| |
| dev_err(&ddata->pdev->dev, "TE not received for 250ms!\n"); |
| |
| atomic_set(&ddata->do_update, 0); |
| in->ops.dsi->bus_unlock(in); |
| } |
| |
| static int dsicm_update(struct omap_dss_device *dssdev, |
| u16 x, u16 y, u16 w, u16 h) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| dev_dbg(&ddata->pdev->dev, "update %d, %d, %d x %d\n", x, y, w, h); |
| |
| mutex_lock(&ddata->lock); |
| in->ops.dsi->bus_lock(in); |
| |
| r = dsicm_wake_up(ddata); |
| if (r) |
| goto err; |
| |
| if (!ddata->enabled) { |
| r = 0; |
| goto err; |
| } |
| |
| /* XXX no need to send this every frame, but dsi break if not done */ |
| r = dsicm_set_update_window(ddata, 0, 0, |
| dssdev->panel.timings.x_res, |
| dssdev->panel.timings.y_res); |
| if (r) |
| goto err; |
| |
| if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) { |
| schedule_delayed_work(&ddata->te_timeout_work, |
| msecs_to_jiffies(250)); |
| atomic_set(&ddata->do_update, 1); |
| } else { |
| r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb, |
| ddata); |
| if (r) |
| goto err; |
| } |
| |
| /* note: no bus_unlock here. unlock is in framedone_cb */ |
| mutex_unlock(&ddata->lock); |
| return 0; |
| err: |
| in->ops.dsi->bus_unlock(in); |
| mutex_unlock(&ddata->lock); |
| return r; |
| } |
| |
| static int dsicm_sync(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| |
| dev_dbg(&ddata->pdev->dev, "sync\n"); |
| |
| mutex_lock(&ddata->lock); |
| in->ops.dsi->bus_lock(in); |
| in->ops.dsi->bus_unlock(in); |
| mutex_unlock(&ddata->lock); |
| |
| dev_dbg(&ddata->pdev->dev, "sync done\n"); |
| |
| return 0; |
| } |
| |
| static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable) |
| { |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| if (enable) |
| r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_TEAR_ON, 0); |
| else |
| r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF); |
| |
| if (!gpio_is_valid(ddata->ext_te_gpio)) |
| in->ops.dsi->enable_te(in, enable); |
| |
| /* possible panel bug */ |
| msleep(100); |
| |
| return r; |
| } |
| |
| static int dsicm_enable_te(struct omap_dss_device *dssdev, bool enable) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| |
| mutex_lock(&ddata->lock); |
| |
| if (ddata->te_enabled == enable) |
| goto end; |
| |
| in->ops.dsi->bus_lock(in); |
| |
| if (ddata->enabled) { |
| r = dsicm_wake_up(ddata); |
| if (r) |
| goto err; |
| |
| r = _dsicm_enable_te(ddata, enable); |
| if (r) |
| goto err; |
| } |
| |
| ddata->te_enabled = enable; |
| |
| in->ops.dsi->bus_unlock(in); |
| end: |
| mutex_unlock(&ddata->lock); |
| |
| return 0; |
| err: |
| in->ops.dsi->bus_unlock(in); |
| mutex_unlock(&ddata->lock); |
| |
| return r; |
| } |
| |
| static int dsicm_get_te(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| int r; |
| |
| mutex_lock(&ddata->lock); |
| r = ddata->te_enabled; |
| mutex_unlock(&ddata->lock); |
| |
| return r; |
| } |
| |
| static int dsicm_memory_read(struct omap_dss_device *dssdev, |
| void *buf, size_t size, |
| u16 x, u16 y, u16 w, u16 h) |
| { |
| struct panel_drv_data *ddata = to_panel_data(dssdev); |
| struct omap_dss_device *in = ddata->in; |
| int r; |
| int first = 1; |
| int plen; |
| unsigned buf_used = 0; |
| |
| if (size < w * h * 3) |
| return -ENOMEM; |
| |
| mutex_lock(&ddata->lock); |
| |
| if (!ddata->enabled) { |
| r = -ENODEV; |
| goto err1; |
| } |
| |
| size = min(w * h * 3, |
| dssdev->panel.timings.x_res * |
| dssdev->panel.timings.y_res * 3); |
| |
| in->ops.dsi->bus_lock(in); |
| |
| r = dsicm_wake_up(ddata); |
| if (r) |
| goto err2; |
| |
| /* plen 1 or 2 goes into short packet. until checksum error is fixed, |
| * use short packets. plen 32 works, but bigger packets seem to cause |
| * an error. */ |
| if (size % 2) |
| plen = 1; |
| else |
| plen = 2; |
| |
| dsicm_set_update_window(ddata, x, y, w, h); |
| |
| r = in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, plen); |
| if (r) |
| goto err2; |
| |
| while (buf_used < size) { |
| u8 dcs_cmd = first ? 0x2e : 0x3e; |
| first = 0; |
| |
| r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, |
| buf + buf_used, size - buf_used); |
| |
| if (r < 0) { |
| dev_err(dssdev->dev, "read error\n"); |
| goto err3; |
| } |
| |
| buf_used += r; |
| |
| if (r < plen) { |
| dev_err(&ddata->pdev->dev, "short read\n"); |
| break; |
| } |
| |
| if (signal_pending(current)) { |
| dev_err(&ddata->pdev->dev, "signal pending, " |
| "aborting memory read\n"); |
| r = -ERESTARTSYS; |
| goto err3; |
| } |
| } |
| |
| r = buf_used; |
| |
| err3: |
| in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, 1); |
| err2: |
| in->ops.dsi->bus_unlock(in); |
| err1: |
| mutex_unlock(&ddata->lock); |
| return r; |
| } |
| |
| static void dsicm_ulps_work(struct work_struct *work) |
| { |
| struct panel_drv_data *ddata = container_of(work, struct panel_drv_data, |
| ulps_work.work); |
| struct omap_dss_device *dssdev = &ddata->dssdev; |
| struct omap_dss_device *in = ddata->in; |
| |
| mutex_lock(&ddata->lock); |
| |
| if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !ddata->enabled) { |
| mutex_unlock(&ddata->lock); |
| return; |
| } |
| |
| in->ops.dsi->bus_lock(in); |
| |
| dsicm_enter_ulps(ddata); |
| |
| in->ops.dsi->bus_unlock(in); |
| mutex_unlock(&ddata->lock); |
| } |
| |
| static struct omap_dss_driver dsicm_ops = { |
| .connect = dsicm_connect, |
| .disconnect = dsicm_disconnect, |
| |
| .enable = dsicm_enable, |
| .disable = dsicm_disable, |
| |
| .update = dsicm_update, |
| .sync = dsicm_sync, |
| |
| .get_resolution = dsicm_get_resolution, |
| .get_recommended_bpp = omapdss_default_get_recommended_bpp, |
| |
| .enable_te = dsicm_enable_te, |
| .get_te = dsicm_get_te, |
| |
| .memory_read = dsicm_memory_read, |
| }; |
| |
| static int dsicm_probe_of(struct platform_device *pdev) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *in; |
| int gpio; |
| |
| gpio = of_get_named_gpio(node, "reset-gpios", 0); |
| if (!gpio_is_valid(gpio)) { |
| dev_err(&pdev->dev, "failed to parse reset gpio\n"); |
| return gpio; |
| } |
| ddata->reset_gpio = gpio; |
| |
| gpio = of_get_named_gpio(node, "te-gpios", 0); |
| if (gpio_is_valid(gpio) || gpio == -ENOENT) { |
| ddata->ext_te_gpio = gpio; |
| } else { |
| dev_err(&pdev->dev, "failed to parse TE gpio\n"); |
| return gpio; |
| } |
| |
| in = omapdss_of_find_source_for_first_ep(node); |
| if (IS_ERR(in)) { |
| dev_err(&pdev->dev, "failed to find video source\n"); |
| return PTR_ERR(in); |
| } |
| |
| ddata->in = in; |
| |
| /* TODO: ulps, backlight */ |
| |
| return 0; |
| } |
| |
| static int dsicm_probe(struct platform_device *pdev) |
| { |
| struct backlight_properties props; |
| struct panel_drv_data *ddata; |
| struct backlight_device *bldev = NULL; |
| struct device *dev = &pdev->dev; |
| struct omap_dss_device *dssdev; |
| int r; |
| |
| dev_dbg(dev, "probe\n"); |
| |
| if (!pdev->dev.of_node) |
| return -ENODEV; |
| |
| ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); |
| if (!ddata) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ddata); |
| ddata->pdev = pdev; |
| |
| r = dsicm_probe_of(pdev); |
| if (r) |
| return r; |
| |
| ddata->timings.x_res = 864; |
| ddata->timings.y_res = 480; |
| ddata->timings.pixelclock = 864 * 480 * 60; |
| |
| dssdev = &ddata->dssdev; |
| dssdev->dev = dev; |
| dssdev->driver = &dsicm_ops; |
| dssdev->panel.timings = ddata->timings; |
| dssdev->type = OMAP_DISPLAY_TYPE_DSI; |
| dssdev->owner = THIS_MODULE; |
| |
| dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888; |
| dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE | |
| OMAP_DSS_DISPLAY_CAP_TEAR_ELIM; |
| |
| r = omapdss_register_display(dssdev); |
| if (r) { |
| dev_err(dev, "Failed to register panel\n"); |
| goto err_reg; |
| } |
| |
| mutex_init(&ddata->lock); |
| |
| atomic_set(&ddata->do_update, 0); |
| |
| if (gpio_is_valid(ddata->reset_gpio)) { |
| r = devm_gpio_request_one(dev, ddata->reset_gpio, |
| GPIOF_OUT_INIT_LOW, "taal rst"); |
| if (r) { |
| dev_err(dev, "failed to request reset gpio\n"); |
| return r; |
| } |
| } |
| |
| if (gpio_is_valid(ddata->ext_te_gpio)) { |
| r = devm_gpio_request_one(dev, ddata->ext_te_gpio, |
| GPIOF_IN, "taal irq"); |
| if (r) { |
| dev_err(dev, "GPIO request failed\n"); |
| return r; |
| } |
| |
| r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio), |
| dsicm_te_isr, |
| IRQF_TRIGGER_RISING, |
| "taal vsync", ddata); |
| |
| if (r) { |
| dev_err(dev, "IRQ request failed\n"); |
| return r; |
| } |
| |
| INIT_DEFERRABLE_WORK(&ddata->te_timeout_work, |
| dsicm_te_timeout_work_callback); |
| |
| dev_dbg(dev, "Using GPIO TE\n"); |
| } |
| |
| ddata->workqueue = create_singlethread_workqueue("dsicm_wq"); |
| if (ddata->workqueue == NULL) { |
| dev_err(dev, "can't create workqueue\n"); |
| return -ENOMEM; |
| } |
| INIT_DELAYED_WORK(&ddata->ulps_work, dsicm_ulps_work); |
| |
| dsicm_hw_reset(ddata); |
| |
| if (ddata->use_dsi_backlight) { |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.max_brightness = 255; |
| |
| props.type = BACKLIGHT_RAW; |
| bldev = backlight_device_register(dev_name(dev), |
| dev, ddata, &dsicm_bl_ops, &props); |
| if (IS_ERR(bldev)) { |
| r = PTR_ERR(bldev); |
| goto err_bl; |
| } |
| |
| ddata->bldev = bldev; |
| |
| bldev->props.fb_blank = FB_BLANK_UNBLANK; |
| bldev->props.power = FB_BLANK_UNBLANK; |
| bldev->props.brightness = 255; |
| |
| dsicm_bl_update_status(bldev); |
| } |
| |
| r = sysfs_create_group(&dev->kobj, &dsicm_attr_group); |
| if (r) { |
| dev_err(dev, "failed to create sysfs files\n"); |
| goto err_sysfs_create; |
| } |
| |
| return 0; |
| |
| err_sysfs_create: |
| if (bldev != NULL) |
| backlight_device_unregister(bldev); |
| err_bl: |
| destroy_workqueue(ddata->workqueue); |
| err_reg: |
| return r; |
| } |
| |
| static int __exit dsicm_remove(struct platform_device *pdev) |
| { |
| struct panel_drv_data *ddata = platform_get_drvdata(pdev); |
| struct omap_dss_device *dssdev = &ddata->dssdev; |
| struct backlight_device *bldev; |
| |
| dev_dbg(&pdev->dev, "remove\n"); |
| |
| omapdss_unregister_display(dssdev); |
| |
| dsicm_disable(dssdev); |
| dsicm_disconnect(dssdev); |
| |
| sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group); |
| |
| bldev = ddata->bldev; |
| if (bldev != NULL) { |
| bldev->props.power = FB_BLANK_POWERDOWN; |
| dsicm_bl_update_status(bldev); |
| backlight_device_unregister(bldev); |
| } |
| |
| omap_dss_put_device(ddata->in); |
| |
| dsicm_cancel_ulps_work(ddata); |
| destroy_workqueue(ddata->workqueue); |
| |
| /* reset, to be sure that the panel is in a valid state */ |
| dsicm_hw_reset(ddata); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id dsicm_of_match[] = { |
| { .compatible = "omapdss,panel-dsi-cm", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, dsicm_of_match); |
| |
| static struct platform_driver dsicm_driver = { |
| .probe = dsicm_probe, |
| .remove = __exit_p(dsicm_remove), |
| .driver = { |
| .name = "panel-dsi-cm", |
| .of_match_table = dsicm_of_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| |
| module_platform_driver(dsicm_driver); |
| |
| MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); |
| MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver"); |
| MODULE_LICENSE("GPL"); |