| /* |
| * Remote Controller core header |
| * |
| * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _IR_CORE |
| #define _IR_CORE |
| |
| #include <linux/spinlock.h> |
| #include <linux/kfifo.h> |
| #include <linux/time.h> |
| #include <linux/timer.h> |
| #include <media/rc-map.h> |
| |
| extern int ir_core_debug; |
| #define IR_dprintk(level, fmt, arg...) if (ir_core_debug >= level) \ |
| printk(KERN_DEBUG "%s: " fmt , __func__, ## arg) |
| |
| enum rc_driver_type { |
| RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */ |
| RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */ |
| }; |
| |
| /** |
| * struct ir_dev_props - Allow caller drivers to set special properties |
| * @driver_type: specifies if the driver or hardware have already a decoder, |
| * or if it needs to use the IR raw event decoders to produce a scancode |
| * @allowed_protos: bitmask with the supported IR_TYPE_* protocols |
| * @scanmask: some hardware decoders are not capable of providing the full |
| * scancode to the application. As this is a hardware limit, we can't do |
| * anything with it. Yet, as the same keycode table can be used with other |
| * devices, a mask is provided to allow its usage. Drivers should generally |
| * leave this field in blank |
| * @timeout: optional time after which device stops sending data |
| * @min_timeout: minimum timeout supported by device |
| * @max_timeout: maximum timeout supported by device |
| * @rx_resolution : resolution (in ns) of input sampler |
| * @tx_resolution: resolution (in ns) of output sampler |
| * @priv: driver-specific data, to be used on the callbacks |
| * @change_protocol: allow changing the protocol used on hardware decoders |
| * @open: callback to allow drivers to enable polling/irq when IR input device |
| * is opened. |
| * @close: callback to allow drivers to disable polling/irq when IR input device |
| * is opened. |
| * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) |
| * @s_tx_carrier: set transmit carrier frequency |
| * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) |
| * @s_rx_carrier: inform driver about carrier it is expected to handle |
| * @tx_ir: transmit IR |
| * @s_idle: optional: enable/disable hardware idle mode, upon which, |
| device doesn't interrupt host until it sees IR pulses |
| * @s_learning_mode: enable wide band receiver used for learning |
| * @s_carrier_report: enable carrier reports |
| */ |
| struct ir_dev_props { |
| enum rc_driver_type driver_type; |
| unsigned long allowed_protos; |
| u32 scanmask; |
| |
| u32 timeout; |
| u32 min_timeout; |
| u32 max_timeout; |
| |
| u32 rx_resolution; |
| u32 tx_resolution; |
| |
| void *priv; |
| int (*change_protocol)(void *priv, u64 ir_type); |
| int (*open)(void *priv); |
| void (*close)(void *priv); |
| int (*s_tx_mask)(void *priv, u32 mask); |
| int (*s_tx_carrier)(void *priv, u32 carrier); |
| int (*s_tx_duty_cycle)(void *priv, u32 duty_cycle); |
| int (*s_rx_carrier_range)(void *priv, u32 min, u32 max); |
| int (*tx_ir)(void *priv, int *txbuf, u32 n); |
| void (*s_idle)(void *priv, bool enable); |
| int (*s_learning_mode)(void *priv, int enable); |
| int (*s_carrier_report) (void *priv, int enable); |
| }; |
| |
| struct ir_input_dev { |
| struct device dev; /* device */ |
| char *driver_name; /* Name of the driver module */ |
| struct ir_scancode_table rc_tab; /* scan/key table */ |
| unsigned long devno; /* device number */ |
| struct ir_dev_props *props; /* Device properties */ |
| struct ir_raw_event_ctrl *raw; /* for raw pulse/space events */ |
| struct input_dev *input_dev; /* the input device associated with this device */ |
| bool idle; |
| |
| /* key info - needed by IR keycode handlers */ |
| spinlock_t keylock; /* protects the below members */ |
| bool keypressed; /* current state */ |
| unsigned long keyup_jiffies; /* when should the current keypress be released? */ |
| struct timer_list timer_keyup; /* timer for releasing a keypress */ |
| u32 last_keycode; /* keycode of last command */ |
| u32 last_scancode; /* scancode of last command */ |
| u8 last_toggle; /* toggle of last command */ |
| }; |
| |
| enum raw_event_type { |
| IR_SPACE = (1 << 0), |
| IR_PULSE = (1 << 1), |
| IR_START_EVENT = (1 << 2), |
| IR_STOP_EVENT = (1 << 3), |
| }; |
| |
| #define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr) |
| |
| /* From ir-keytable.c */ |
| int __ir_input_register(struct input_dev *dev, |
| const struct ir_scancode_table *ir_codes, |
| struct ir_dev_props *props, |
| const char *driver_name); |
| |
| static inline int ir_input_register(struct input_dev *dev, |
| const char *map_name, |
| struct ir_dev_props *props, |
| const char *driver_name) { |
| struct ir_scancode_table *ir_codes; |
| struct ir_input_dev *ir_dev; |
| int rc; |
| |
| if (!map_name) |
| return -EINVAL; |
| |
| ir_codes = get_rc_map(map_name); |
| if (!ir_codes) { |
| ir_codes = get_rc_map(RC_MAP_EMPTY); |
| |
| if (!ir_codes) |
| return -EINVAL; |
| } |
| |
| rc = __ir_input_register(dev, ir_codes, props, driver_name); |
| if (rc < 0) |
| return -EINVAL; |
| |
| ir_dev = input_get_drvdata(dev); |
| |
| if (!rc && ir_dev->props && ir_dev->props->change_protocol) |
| rc = ir_dev->props->change_protocol(ir_dev->props->priv, |
| ir_codes->ir_type); |
| |
| return rc; |
| } |
| |
| void ir_input_unregister(struct input_dev *input_dev); |
| |
| void ir_repeat(struct input_dev *dev); |
| void ir_keydown(struct input_dev *dev, int scancode, u8 toggle); |
| void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle); |
| void ir_keyup(struct input_dev *dev); |
| u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode); |
| |
| /* From ir-raw-event.c */ |
| |
| struct ir_raw_event { |
| union { |
| u32 duration; |
| |
| struct { |
| u32 carrier; |
| u8 duty_cycle; |
| }; |
| }; |
| |
| unsigned pulse:1; |
| unsigned reset:1; |
| unsigned timeout:1; |
| unsigned carrier_report:1; |
| }; |
| |
| #define DEFINE_IR_RAW_EVENT(event) \ |
| struct ir_raw_event event = { \ |
| { .duration = 0 } , \ |
| .pulse = 0, \ |
| .reset = 0, \ |
| .timeout = 0, \ |
| .carrier_report = 0 } |
| |
| static inline void init_ir_raw_event(struct ir_raw_event *ev) |
| { |
| memset(ev, 0, sizeof(*ev)); |
| } |
| |
| #define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */ |
| |
| void ir_raw_event_handle(struct input_dev *input_dev); |
| int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev); |
| int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type); |
| int ir_raw_event_store_with_filter(struct input_dev *input_dev, |
| struct ir_raw_event *ev); |
| void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle); |
| |
| static inline void ir_raw_event_reset(struct input_dev *input_dev) |
| { |
| DEFINE_IR_RAW_EVENT(ev); |
| ev.reset = true; |
| |
| ir_raw_event_store(input_dev, &ev); |
| ir_raw_event_handle(input_dev); |
| } |
| |
| #endif /* _IR_CORE */ |