| /* |
| drbd_req.c |
| |
| This file is part of DRBD by Philipp Reisner and Lars Ellenberg. |
| |
| Copyright (C) 2001-2008, LINBIT Information Technologies GmbH. |
| Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>. |
| Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>. |
| |
| drbd is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| drbd is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with drbd; see the file COPYING. If not, write to |
| the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/module.h> |
| |
| #include <linux/slab.h> |
| #include <linux/drbd.h> |
| #include "drbd_int.h" |
| #include "drbd_req.h" |
| |
| |
| static bool drbd_may_do_local_read(struct drbd_conf *mdev, sector_t sector, int size); |
| |
| /* Update disk stats at start of I/O request */ |
| static void _drbd_start_io_acct(struct drbd_conf *mdev, struct drbd_request *req, struct bio *bio) |
| { |
| const int rw = bio_data_dir(bio); |
| int cpu; |
| cpu = part_stat_lock(); |
| part_round_stats(cpu, &mdev->vdisk->part0); |
| part_stat_inc(cpu, &mdev->vdisk->part0, ios[rw]); |
| part_stat_add(cpu, &mdev->vdisk->part0, sectors[rw], bio_sectors(bio)); |
| (void) cpu; /* The macro invocations above want the cpu argument, I do not like |
| the compiler warning about cpu only assigned but never used... */ |
| part_inc_in_flight(&mdev->vdisk->part0, rw); |
| part_stat_unlock(); |
| } |
| |
| /* Update disk stats when completing request upwards */ |
| static void _drbd_end_io_acct(struct drbd_conf *mdev, struct drbd_request *req) |
| { |
| int rw = bio_data_dir(req->master_bio); |
| unsigned long duration = jiffies - req->start_time; |
| int cpu; |
| cpu = part_stat_lock(); |
| part_stat_add(cpu, &mdev->vdisk->part0, ticks[rw], duration); |
| part_round_stats(cpu, &mdev->vdisk->part0); |
| part_dec_in_flight(&mdev->vdisk->part0, rw); |
| part_stat_unlock(); |
| } |
| |
| static struct drbd_request *drbd_req_new(struct drbd_conf *mdev, |
| struct bio *bio_src) |
| { |
| struct drbd_request *req; |
| |
| req = mempool_alloc(drbd_request_mempool, GFP_NOIO); |
| if (!req) |
| return NULL; |
| |
| drbd_req_make_private_bio(req, bio_src); |
| req->rq_state = bio_data_dir(bio_src) == WRITE ? RQ_WRITE : 0; |
| req->w.mdev = mdev; |
| req->master_bio = bio_src; |
| req->epoch = 0; |
| |
| drbd_clear_interval(&req->i); |
| req->i.sector = bio_src->bi_sector; |
| req->i.size = bio_src->bi_size; |
| req->i.local = true; |
| req->i.waiting = false; |
| |
| INIT_LIST_HEAD(&req->tl_requests); |
| INIT_LIST_HEAD(&req->w.list); |
| |
| return req; |
| } |
| |
| static void drbd_req_free(struct drbd_request *req) |
| { |
| mempool_free(req, drbd_request_mempool); |
| } |
| |
| /* rw is bio_data_dir(), only READ or WRITE */ |
| static void _req_is_done(struct drbd_conf *mdev, struct drbd_request *req, const int rw) |
| { |
| const unsigned long s = req->rq_state; |
| |
| /* remove it from the transfer log. |
| * well, only if it had been there in the first |
| * place... if it had not (local only or conflicting |
| * and never sent), it should still be "empty" as |
| * initialized in drbd_req_new(), so we can list_del() it |
| * here unconditionally */ |
| list_del_init(&req->tl_requests); |
| |
| /* if it was a write, we may have to set the corresponding |
| * bit(s) out-of-sync first. If it had a local part, we need to |
| * release the reference to the activity log. */ |
| if (rw == WRITE) { |
| /* Set out-of-sync unless both OK flags are set |
| * (local only or remote failed). |
| * Other places where we set out-of-sync: |
| * READ with local io-error */ |
| if (!(s & RQ_NET_OK) || !(s & RQ_LOCAL_OK)) |
| drbd_set_out_of_sync(mdev, req->i.sector, req->i.size); |
| |
| if ((s & RQ_NET_OK) && (s & RQ_LOCAL_OK) && (s & RQ_NET_SIS)) |
| drbd_set_in_sync(mdev, req->i.sector, req->i.size); |
| |
| /* one might be tempted to move the drbd_al_complete_io |
| * to the local io completion callback drbd_request_endio. |
| * but, if this was a mirror write, we may only |
| * drbd_al_complete_io after this is RQ_NET_DONE, |
| * otherwise the extent could be dropped from the al |
| * before it has actually been written on the peer. |
| * if we crash before our peer knows about the request, |
| * but after the extent has been dropped from the al, |
| * we would forget to resync the corresponding extent. |
| */ |
| if (s & RQ_LOCAL_MASK) { |
| if (get_ldev_if_state(mdev, D_FAILED)) { |
| if (s & RQ_IN_ACT_LOG) |
| drbd_al_complete_io(mdev, &req->i); |
| put_ldev(mdev); |
| } else if (__ratelimit(&drbd_ratelimit_state)) { |
| dev_warn(DEV, "Should have called drbd_al_complete_io(, %llu, %u), " |
| "but my Disk seems to have failed :(\n", |
| (unsigned long long) req->i.sector, req->i.size); |
| } |
| } |
| } |
| |
| if (s & RQ_POSTPONED) |
| drbd_restart_write(req); |
| else |
| drbd_req_free(req); |
| } |
| |
| static void queue_barrier(struct drbd_conf *mdev) |
| { |
| struct drbd_tl_epoch *b; |
| struct drbd_tconn *tconn = mdev->tconn; |
| |
| /* We are within the req_lock. Once we queued the barrier for sending, |
| * we set the CREATE_BARRIER bit. It is cleared as soon as a new |
| * barrier/epoch object is added. This is the only place this bit is |
| * set. It indicates that the barrier for this epoch is already queued, |
| * and no new epoch has been created yet. */ |
| if (test_bit(CREATE_BARRIER, &tconn->flags)) |
| return; |
| |
| b = tconn->newest_tle; |
| b->w.cb = w_send_barrier; |
| b->w.mdev = mdev; |
| /* inc_ap_pending done here, so we won't |
| * get imbalanced on connection loss. |
| * dec_ap_pending will be done in got_BarrierAck |
| * or (on connection loss) in tl_clear. */ |
| inc_ap_pending(mdev); |
| drbd_queue_work(&tconn->data.work, &b->w); |
| set_bit(CREATE_BARRIER, &tconn->flags); |
| } |
| |
| static void _about_to_complete_local_write(struct drbd_conf *mdev, |
| struct drbd_request *req) |
| { |
| const unsigned long s = req->rq_state; |
| |
| /* Before we can signal completion to the upper layers, |
| * we may need to close the current epoch. |
| * We can skip this, if this request has not even been sent, because we |
| * did not have a fully established connection yet/anymore, during |
| * bitmap exchange, or while we are C_AHEAD due to congestion policy. |
| */ |
| if (mdev->state.conn >= C_CONNECTED && |
| (s & RQ_NET_SENT) != 0 && |
| req->epoch == mdev->tconn->newest_tle->br_number) |
| queue_barrier(mdev); |
| } |
| |
| void complete_master_bio(struct drbd_conf *mdev, |
| struct bio_and_error *m) |
| { |
| bio_endio(m->bio, m->error); |
| dec_ap_bio(mdev); |
| } |
| |
| |
| static void drbd_remove_request_interval(struct rb_root *root, |
| struct drbd_request *req) |
| { |
| struct drbd_conf *mdev = req->w.mdev; |
| struct drbd_interval *i = &req->i; |
| |
| drbd_remove_interval(root, i); |
| |
| /* Wake up any processes waiting for this request to complete. */ |
| if (i->waiting) |
| wake_up(&mdev->misc_wait); |
| } |
| |
| static void maybe_wakeup_conflicting_requests(struct drbd_request *req) |
| { |
| const unsigned long s = req->rq_state; |
| if (s & RQ_LOCAL_PENDING && !(s & RQ_LOCAL_ABORTED)) |
| return; |
| if (req->i.waiting) |
| /* Retry all conflicting peer requests. */ |
| wake_up(&req->w.mdev->misc_wait); |
| } |
| |
| static |
| void req_may_be_done(struct drbd_request *req) |
| { |
| const unsigned long s = req->rq_state; |
| struct drbd_conf *mdev = req->w.mdev; |
| int rw = req->rq_state & RQ_WRITE ? WRITE : READ; |
| |
| /* req->master_bio still present means: Not yet completed. |
| * |
| * Unless this is RQ_POSTPONED, which will cause _req_is_done() to |
| * queue it on the retry workqueue instead of destroying it. |
| */ |
| if (req->master_bio && !(s & RQ_POSTPONED)) |
| return; |
| |
| /* Local still pending, even though master_bio is already completed? |
| * may happen for RQ_LOCAL_ABORTED requests. */ |
| if (s & RQ_LOCAL_PENDING) |
| return; |
| |
| if ((s & RQ_NET_MASK) == 0 || (s & RQ_NET_DONE)) { |
| /* this is disconnected (local only) operation, |
| * or protocol A, B, or C P_BARRIER_ACK, |
| * or killed from the transfer log due to connection loss. */ |
| _req_is_done(mdev, req, rw); |
| } |
| /* else: network part and not DONE yet. that is |
| * protocol A, B, or C, barrier ack still pending... */ |
| } |
| |
| /* Helper for __req_mod(). |
| * Set m->bio to the master bio, if it is fit to be completed, |
| * or leave it alone (it is initialized to NULL in __req_mod), |
| * if it has already been completed, or cannot be completed yet. |
| * If m->bio is set, the error status to be returned is placed in m->error. |
| */ |
| static |
| void req_may_be_completed(struct drbd_request *req, struct bio_and_error *m) |
| { |
| const unsigned long s = req->rq_state; |
| struct drbd_conf *mdev = req->w.mdev; |
| |
| /* we must not complete the master bio, while it is |
| * still being processed by _drbd_send_zc_bio (drbd_send_dblock) |
| * not yet acknowledged by the peer |
| * not yet completed by the local io subsystem |
| * these flags may get cleared in any order by |
| * the worker, |
| * the receiver, |
| * the bio_endio completion callbacks. |
| */ |
| if (s & RQ_LOCAL_PENDING && !(s & RQ_LOCAL_ABORTED)) |
| return; |
| if (s & RQ_NET_QUEUED) |
| return; |
| if (s & RQ_NET_PENDING) |
| return; |
| |
| if (req->master_bio) { |
| int rw = bio_rw(req->master_bio); |
| |
| /* this is DATA_RECEIVED (remote read) |
| * or protocol C P_WRITE_ACK |
| * or protocol B P_RECV_ACK |
| * or protocol A "HANDED_OVER_TO_NETWORK" (SendAck) |
| * or canceled or failed, |
| * or killed from the transfer log due to connection loss. |
| */ |
| |
| /* |
| * figure out whether to report success or failure. |
| * |
| * report success when at least one of the operations succeeded. |
| * or, to put the other way, |
| * only report failure, when both operations failed. |
| * |
| * what to do about the failures is handled elsewhere. |
| * what we need to do here is just: complete the master_bio. |
| * |
| * local completion error, if any, has been stored as ERR_PTR |
| * in private_bio within drbd_request_endio. |
| */ |
| int ok = (s & RQ_LOCAL_OK) || (s & RQ_NET_OK); |
| int error = PTR_ERR(req->private_bio); |
| |
| /* remove the request from the conflict detection |
| * respective block_id verification hash */ |
| if (!drbd_interval_empty(&req->i)) { |
| struct rb_root *root; |
| |
| if (rw == WRITE) |
| root = &mdev->write_requests; |
| else |
| root = &mdev->read_requests; |
| drbd_remove_request_interval(root, req); |
| } else if (!(s & RQ_POSTPONED)) |
| D_ASSERT((s & (RQ_NET_MASK & ~RQ_NET_DONE)) == 0); |
| |
| /* for writes we need to do some extra housekeeping */ |
| if (rw == WRITE) |
| _about_to_complete_local_write(mdev, req); |
| |
| /* Update disk stats */ |
| _drbd_end_io_acct(mdev, req); |
| |
| /* if READ failed, |
| * have it be pushed back to the retry work queue, |
| * so it will re-enter __drbd_make_request, |
| * and be re-assigned to a suitable local or remote path, |
| * or failed if we do not have access to good data anymore. |
| * READA may fail. |
| * WRITE should have used all available paths already. |
| */ |
| if (!ok && rw == READ) |
| req->rq_state |= RQ_POSTPONED; |
| |
| if (!(req->rq_state & RQ_POSTPONED)) { |
| m->error = ok ? 0 : (error ?: -EIO); |
| m->bio = req->master_bio; |
| req->master_bio = NULL; |
| } else { |
| /* Assert that this will be _req_is_done() |
| * with this very invokation. */ |
| /* FIXME: |
| * what about (RQ_LOCAL_PENDING | RQ_LOCAL_ABORTED)? |
| */ |
| D_ASSERT(!(s & RQ_LOCAL_PENDING)); |
| D_ASSERT(s & RQ_NET_DONE); |
| } |
| } |
| req_may_be_done(req); |
| } |
| |
| static void req_may_be_completed_not_susp(struct drbd_request *req, struct bio_and_error *m) |
| { |
| struct drbd_conf *mdev = req->w.mdev; |
| |
| if (!drbd_suspended(mdev)) |
| req_may_be_completed(req, m); |
| } |
| |
| /* obviously this could be coded as many single functions |
| * instead of one huge switch, |
| * or by putting the code directly in the respective locations |
| * (as it has been before). |
| * |
| * but having it this way |
| * enforces that it is all in this one place, where it is easier to audit, |
| * it makes it obvious that whatever "event" "happens" to a request should |
| * happen "atomically" within the req_lock, |
| * and it enforces that we have to think in a very structured manner |
| * about the "events" that may happen to a request during its life time ... |
| */ |
| int __req_mod(struct drbd_request *req, enum drbd_req_event what, |
| struct bio_and_error *m) |
| { |
| struct drbd_conf *mdev = req->w.mdev; |
| struct net_conf *nc; |
| int p, rv = 0; |
| |
| if (m) |
| m->bio = NULL; |
| |
| switch (what) { |
| default: |
| dev_err(DEV, "LOGIC BUG in %s:%u\n", __FILE__ , __LINE__); |
| break; |
| |
| /* does not happen... |
| * initialization done in drbd_req_new |
| case CREATED: |
| break; |
| */ |
| |
| case TO_BE_SENT: /* via network */ |
| /* reached via __drbd_make_request |
| * and from w_read_retry_remote */ |
| D_ASSERT(!(req->rq_state & RQ_NET_MASK)); |
| req->rq_state |= RQ_NET_PENDING; |
| rcu_read_lock(); |
| nc = rcu_dereference(mdev->tconn->net_conf); |
| p = nc->wire_protocol; |
| rcu_read_unlock(); |
| req->rq_state |= |
| p == DRBD_PROT_C ? RQ_EXP_WRITE_ACK : |
| p == DRBD_PROT_B ? RQ_EXP_RECEIVE_ACK : 0; |
| inc_ap_pending(mdev); |
| break; |
| |
| case TO_BE_SUBMITTED: /* locally */ |
| /* reached via __drbd_make_request */ |
| D_ASSERT(!(req->rq_state & RQ_LOCAL_MASK)); |
| req->rq_state |= RQ_LOCAL_PENDING; |
| break; |
| |
| case COMPLETED_OK: |
| if (req->rq_state & RQ_WRITE) |
| mdev->writ_cnt += req->i.size >> 9; |
| else |
| mdev->read_cnt += req->i.size >> 9; |
| |
| req->rq_state |= (RQ_LOCAL_COMPLETED|RQ_LOCAL_OK); |
| req->rq_state &= ~RQ_LOCAL_PENDING; |
| |
| maybe_wakeup_conflicting_requests(req); |
| req_may_be_completed_not_susp(req, m); |
| break; |
| |
| case ABORT_DISK_IO: |
| req->rq_state |= RQ_LOCAL_ABORTED; |
| req_may_be_completed_not_susp(req, m); |
| break; |
| |
| case WRITE_COMPLETED_WITH_ERROR: |
| req->rq_state |= RQ_LOCAL_COMPLETED; |
| req->rq_state &= ~RQ_LOCAL_PENDING; |
| |
| __drbd_chk_io_error(mdev, false); |
| maybe_wakeup_conflicting_requests(req); |
| req_may_be_completed_not_susp(req, m); |
| break; |
| |
| case READ_AHEAD_COMPLETED_WITH_ERROR: |
| /* it is legal to fail READA */ |
| req->rq_state |= RQ_LOCAL_COMPLETED; |
| req->rq_state &= ~RQ_LOCAL_PENDING; |
| req_may_be_completed_not_susp(req, m); |
| break; |
| |
| case READ_COMPLETED_WITH_ERROR: |
| drbd_set_out_of_sync(mdev, req->i.sector, req->i.size); |
| |
| req->rq_state |= RQ_LOCAL_COMPLETED; |
| req->rq_state &= ~RQ_LOCAL_PENDING; |
| |
| D_ASSERT(!(req->rq_state & RQ_NET_MASK)); |
| |
| __drbd_chk_io_error(mdev, false); |
| break; |
| |
| case QUEUE_FOR_NET_READ: |
| /* READ or READA, and |
| * no local disk, |
| * or target area marked as invalid, |
| * or just got an io-error. */ |
| /* from __drbd_make_request |
| * or from bio_endio during read io-error recovery */ |
| |
| /* So we can verify the handle in the answer packet. |
| * Corresponding drbd_remove_request_interval is in |
| * req_may_be_completed() */ |
| D_ASSERT(drbd_interval_empty(&req->i)); |
| drbd_insert_interval(&mdev->read_requests, &req->i); |
| |
| set_bit(UNPLUG_REMOTE, &mdev->flags); |
| |
| D_ASSERT(req->rq_state & RQ_NET_PENDING); |
| D_ASSERT((req->rq_state & RQ_LOCAL_MASK) == 0); |
| req->rq_state |= RQ_NET_QUEUED; |
| req->w.cb = w_send_read_req; |
| drbd_queue_work(&mdev->tconn->data.work, &req->w); |
| break; |
| |
| case QUEUE_FOR_NET_WRITE: |
| /* assert something? */ |
| /* from __drbd_make_request only */ |
| |
| /* Corresponding drbd_remove_request_interval is in |
| * req_may_be_completed() */ |
| D_ASSERT(drbd_interval_empty(&req->i)); |
| drbd_insert_interval(&mdev->write_requests, &req->i); |
| |
| /* NOTE |
| * In case the req ended up on the transfer log before being |
| * queued on the worker, it could lead to this request being |
| * missed during cleanup after connection loss. |
| * So we have to do both operations here, |
| * within the same lock that protects the transfer log. |
| * |
| * _req_add_to_epoch(req); this has to be after the |
| * _maybe_start_new_epoch(req); which happened in |
| * __drbd_make_request, because we now may set the bit |
| * again ourselves to close the current epoch. |
| * |
| * Add req to the (now) current epoch (barrier). */ |
| |
| /* otherwise we may lose an unplug, which may cause some remote |
| * io-scheduler timeout to expire, increasing maximum latency, |
| * hurting performance. */ |
| set_bit(UNPLUG_REMOTE, &mdev->flags); |
| |
| /* see __drbd_make_request, |
| * just after it grabs the req_lock */ |
| D_ASSERT(test_bit(CREATE_BARRIER, &mdev->tconn->flags) == 0); |
| |
| req->epoch = mdev->tconn->newest_tle->br_number; |
| |
| /* increment size of current epoch */ |
| mdev->tconn->newest_tle->n_writes++; |
| |
| /* queue work item to send data */ |
| D_ASSERT(req->rq_state & RQ_NET_PENDING); |
| req->rq_state |= RQ_NET_QUEUED; |
| req->w.cb = w_send_dblock; |
| drbd_queue_work(&mdev->tconn->data.work, &req->w); |
| |
| /* close the epoch, in case it outgrew the limit */ |
| rcu_read_lock(); |
| nc = rcu_dereference(mdev->tconn->net_conf); |
| p = nc->max_epoch_size; |
| rcu_read_unlock(); |
| if (mdev->tconn->newest_tle->n_writes >= p) |
| queue_barrier(mdev); |
| |
| break; |
| |
| case QUEUE_FOR_SEND_OOS: |
| req->rq_state |= RQ_NET_QUEUED; |
| req->w.cb = w_send_out_of_sync; |
| drbd_queue_work(&mdev->tconn->data.work, &req->w); |
| break; |
| |
| case READ_RETRY_REMOTE_CANCELED: |
| case SEND_CANCELED: |
| case SEND_FAILED: |
| /* real cleanup will be done from tl_clear. just update flags |
| * so it is no longer marked as on the worker queue */ |
| req->rq_state &= ~RQ_NET_QUEUED; |
| /* if we did it right, tl_clear should be scheduled only after |
| * this, so this should not be necessary! */ |
| req_may_be_completed_not_susp(req, m); |
| break; |
| |
| case HANDED_OVER_TO_NETWORK: |
| /* assert something? */ |
| if (bio_data_dir(req->master_bio) == WRITE) |
| atomic_add(req->i.size >> 9, &mdev->ap_in_flight); |
| |
| if (bio_data_dir(req->master_bio) == WRITE && |
| !(req->rq_state & (RQ_EXP_RECEIVE_ACK | RQ_EXP_WRITE_ACK))) { |
| /* this is what is dangerous about protocol A: |
| * pretend it was successfully written on the peer. */ |
| if (req->rq_state & RQ_NET_PENDING) { |
| dec_ap_pending(mdev); |
| req->rq_state &= ~RQ_NET_PENDING; |
| req->rq_state |= RQ_NET_OK; |
| } /* else: neg-ack was faster... */ |
| /* it is still not yet RQ_NET_DONE until the |
| * corresponding epoch barrier got acked as well, |
| * so we know what to dirty on connection loss */ |
| } |
| req->rq_state &= ~RQ_NET_QUEUED; |
| req->rq_state |= RQ_NET_SENT; |
| req_may_be_completed_not_susp(req, m); |
| break; |
| |
| case OOS_HANDED_TO_NETWORK: |
| /* Was not set PENDING, no longer QUEUED, so is now DONE |
| * as far as this connection is concerned. */ |
| req->rq_state &= ~RQ_NET_QUEUED; |
| req->rq_state |= RQ_NET_DONE; |
| req_may_be_completed_not_susp(req, m); |
| break; |
| |
| case CONNECTION_LOST_WHILE_PENDING: |
| /* transfer log cleanup after connection loss */ |
| /* assert something? */ |
| if (req->rq_state & RQ_NET_PENDING) |
| dec_ap_pending(mdev); |
| |
| p = !(req->rq_state & RQ_WRITE) && req->rq_state & RQ_NET_PENDING; |
| |
| req->rq_state &= ~(RQ_NET_OK|RQ_NET_PENDING); |
| req->rq_state |= RQ_NET_DONE; |
| if (req->rq_state & RQ_NET_SENT && req->rq_state & RQ_WRITE) |
| atomic_sub(req->i.size >> 9, &mdev->ap_in_flight); |
| |
| req_may_be_completed(req, m); /* Allowed while state.susp */ |
| break; |
| |
| case DISCARD_WRITE: |
| /* for discarded conflicting writes of multiple primaries, |
| * there is no need to keep anything in the tl, potential |
| * node crashes are covered by the activity log. */ |
| req->rq_state |= RQ_NET_DONE; |
| /* fall through */ |
| case WRITE_ACKED_BY_PEER_AND_SIS: |
| case WRITE_ACKED_BY_PEER: |
| if (what == WRITE_ACKED_BY_PEER_AND_SIS) |
| req->rq_state |= RQ_NET_SIS; |
| D_ASSERT(req->rq_state & RQ_EXP_WRITE_ACK); |
| /* protocol C; successfully written on peer. |
| * Nothing more to do here. |
| * We want to keep the tl in place for all protocols, to cater |
| * for volatile write-back caches on lower level devices. */ |
| |
| goto ack_common; |
| case RECV_ACKED_BY_PEER: |
| D_ASSERT(req->rq_state & RQ_EXP_RECEIVE_ACK); |
| /* protocol B; pretends to be successfully written on peer. |
| * see also notes above in HANDED_OVER_TO_NETWORK about |
| * protocol != C */ |
| ack_common: |
| req->rq_state |= RQ_NET_OK; |
| D_ASSERT(req->rq_state & RQ_NET_PENDING); |
| dec_ap_pending(mdev); |
| atomic_sub(req->i.size >> 9, &mdev->ap_in_flight); |
| req->rq_state &= ~RQ_NET_PENDING; |
| maybe_wakeup_conflicting_requests(req); |
| req_may_be_completed_not_susp(req, m); |
| break; |
| |
| case POSTPONE_WRITE: |
| D_ASSERT(req->rq_state & RQ_EXP_WRITE_ACK); |
| /* If this node has already detected the write conflict, the |
| * worker will be waiting on misc_wait. Wake it up once this |
| * request has completed locally. |
| */ |
| D_ASSERT(req->rq_state & RQ_NET_PENDING); |
| req->rq_state |= RQ_POSTPONED; |
| maybe_wakeup_conflicting_requests(req); |
| req_may_be_completed_not_susp(req, m); |
| break; |
| |
| case NEG_ACKED: |
| /* assert something? */ |
| if (req->rq_state & RQ_NET_PENDING) { |
| dec_ap_pending(mdev); |
| if (req->rq_state & RQ_WRITE) |
| atomic_sub(req->i.size >> 9, &mdev->ap_in_flight); |
| } |
| req->rq_state &= ~(RQ_NET_OK|RQ_NET_PENDING); |
| |
| req->rq_state |= RQ_NET_DONE; |
| |
| maybe_wakeup_conflicting_requests(req); |
| req_may_be_completed_not_susp(req, m); |
| /* else: done by HANDED_OVER_TO_NETWORK */ |
| break; |
| |
| case FAIL_FROZEN_DISK_IO: |
| if (!(req->rq_state & RQ_LOCAL_COMPLETED)) |
| break; |
| |
| req_may_be_completed(req, m); /* Allowed while state.susp */ |
| break; |
| |
| case RESTART_FROZEN_DISK_IO: |
| if (!(req->rq_state & RQ_LOCAL_COMPLETED)) |
| break; |
| |
| req->rq_state &= ~RQ_LOCAL_COMPLETED; |
| |
| rv = MR_READ; |
| if (bio_data_dir(req->master_bio) == WRITE) |
| rv = MR_WRITE; |
| |
| get_ldev(mdev); |
| req->w.cb = w_restart_disk_io; |
| drbd_queue_work(&mdev->tconn->data.work, &req->w); |
| break; |
| |
| case RESEND: |
| /* If RQ_NET_OK is already set, we got a P_WRITE_ACK or P_RECV_ACK |
| before the connection loss (B&C only); only P_BARRIER_ACK was missing. |
| Throwing them out of the TL here by pretending we got a BARRIER_ACK. |
| During connection handshake, we ensure that the peer was not rebooted. */ |
| if (!(req->rq_state & RQ_NET_OK)) { |
| if (req->w.cb) { |
| drbd_queue_work(&mdev->tconn->data.work, &req->w); |
| rv = req->rq_state & RQ_WRITE ? MR_WRITE : MR_READ; |
| } |
| break; |
| } |
| /* else, fall through to BARRIER_ACKED */ |
| |
| case BARRIER_ACKED: |
| if (!(req->rq_state & RQ_WRITE)) |
| break; |
| |
| if (req->rq_state & RQ_NET_PENDING) { |
| /* barrier came in before all requests were acked. |
| * this is bad, because if the connection is lost now, |
| * we won't be able to clean them up... */ |
| dev_err(DEV, "FIXME (BARRIER_ACKED but pending)\n"); |
| list_move(&req->tl_requests, &mdev->tconn->out_of_sequence_requests); |
| } |
| if ((req->rq_state & RQ_NET_MASK) != 0) { |
| req->rq_state |= RQ_NET_DONE; |
| if (!(req->rq_state & (RQ_EXP_RECEIVE_ACK | RQ_EXP_WRITE_ACK))) |
| atomic_sub(req->i.size>>9, &mdev->ap_in_flight); |
| } |
| req_may_be_done(req); /* Allowed while state.susp */ |
| break; |
| |
| case DATA_RECEIVED: |
| D_ASSERT(req->rq_state & RQ_NET_PENDING); |
| dec_ap_pending(mdev); |
| req->rq_state &= ~RQ_NET_PENDING; |
| req->rq_state |= (RQ_NET_OK|RQ_NET_DONE); |
| req_may_be_completed_not_susp(req, m); |
| break; |
| }; |
| |
| return rv; |
| } |
| |
| /* we may do a local read if: |
| * - we are consistent (of course), |
| * - or we are generally inconsistent, |
| * BUT we are still/already IN SYNC for this area. |
| * since size may be bigger than BM_BLOCK_SIZE, |
| * we may need to check several bits. |
| */ |
| static bool drbd_may_do_local_read(struct drbd_conf *mdev, sector_t sector, int size) |
| { |
| unsigned long sbnr, ebnr; |
| sector_t esector, nr_sectors; |
| |
| if (mdev->state.disk == D_UP_TO_DATE) |
| return true; |
| if (mdev->state.disk != D_INCONSISTENT) |
| return false; |
| esector = sector + (size >> 9) - 1; |
| nr_sectors = drbd_get_capacity(mdev->this_bdev); |
| D_ASSERT(sector < nr_sectors); |
| D_ASSERT(esector < nr_sectors); |
| |
| sbnr = BM_SECT_TO_BIT(sector); |
| ebnr = BM_SECT_TO_BIT(esector); |
| |
| return drbd_bm_count_bits(mdev, sbnr, ebnr) == 0; |
| } |
| |
| static bool remote_due_to_read_balancing(struct drbd_conf *mdev, sector_t sector) |
| { |
| enum drbd_read_balancing rbm; |
| struct backing_dev_info *bdi; |
| int stripe_shift; |
| |
| if (mdev->state.pdsk < D_UP_TO_DATE) |
| return false; |
| |
| rcu_read_lock(); |
| rbm = rcu_dereference(mdev->ldev->disk_conf)->read_balancing; |
| rcu_read_unlock(); |
| |
| switch (rbm) { |
| case RB_CONGESTED_REMOTE: |
| bdi = &mdev->ldev->backing_bdev->bd_disk->queue->backing_dev_info; |
| return bdi_read_congested(bdi); |
| case RB_LEAST_PENDING: |
| return atomic_read(&mdev->local_cnt) > |
| atomic_read(&mdev->ap_pending_cnt) + atomic_read(&mdev->rs_pending_cnt); |
| case RB_32K_STRIPING: /* stripe_shift = 15 */ |
| case RB_64K_STRIPING: |
| case RB_128K_STRIPING: |
| case RB_256K_STRIPING: |
| case RB_512K_STRIPING: |
| case RB_1M_STRIPING: /* stripe_shift = 20 */ |
| stripe_shift = (rbm - RB_32K_STRIPING + 15); |
| return (sector >> (stripe_shift - 9)) & 1; |
| case RB_ROUND_ROBIN: |
| return test_and_change_bit(READ_BALANCE_RR, &mdev->flags); |
| case RB_PREFER_REMOTE: |
| return true; |
| case RB_PREFER_LOCAL: |
| default: |
| return false; |
| } |
| } |
| |
| /* |
| * complete_conflicting_writes - wait for any conflicting write requests |
| * |
| * The write_requests tree contains all active write requests which we |
| * currently know about. Wait for any requests to complete which conflict with |
| * the new one. |
| * |
| * Only way out: remove the conflicting intervals from the tree. |
| */ |
| static void complete_conflicting_writes(struct drbd_request *req) |
| { |
| DEFINE_WAIT(wait); |
| struct drbd_conf *mdev = req->w.mdev; |
| struct drbd_interval *i; |
| sector_t sector = req->i.sector; |
| int size = req->i.size; |
| |
| i = drbd_find_overlap(&mdev->write_requests, sector, size); |
| if (!i) |
| return; |
| |
| for (;;) { |
| prepare_to_wait(&mdev->misc_wait, &wait, TASK_UNINTERRUPTIBLE); |
| i = drbd_find_overlap(&mdev->write_requests, sector, size); |
| if (!i) |
| break; |
| /* Indicate to wake up device->misc_wait on progress. */ |
| i->waiting = true; |
| spin_unlock_irq(&mdev->tconn->req_lock); |
| schedule(); |
| spin_lock_irq(&mdev->tconn->req_lock); |
| } |
| finish_wait(&mdev->misc_wait, &wait); |
| } |
| |
| int __drbd_make_request(struct drbd_conf *mdev, struct bio *bio, unsigned long start_time) |
| { |
| const int rw = bio_rw(bio); |
| const int size = bio->bi_size; |
| const sector_t sector = bio->bi_sector; |
| struct drbd_tl_epoch *b = NULL; |
| struct drbd_request *req; |
| struct net_conf *nc; |
| int local, remote, send_oos = 0; |
| int err = 0; |
| int ret = 0; |
| union drbd_dev_state s; |
| |
| /* allocate outside of all locks; */ |
| req = drbd_req_new(mdev, bio); |
| if (!req) { |
| dec_ap_bio(mdev); |
| /* only pass the error to the upper layers. |
| * if user cannot handle io errors, that's not our business. */ |
| dev_err(DEV, "could not kmalloc() req\n"); |
| bio_endio(bio, -ENOMEM); |
| return 0; |
| } |
| req->start_time = start_time; |
| |
| local = get_ldev(mdev); |
| if (!local) { |
| bio_put(req->private_bio); /* or we get a bio leak */ |
| req->private_bio = NULL; |
| } |
| if (rw == WRITE) { |
| remote = 1; |
| } else { |
| /* READ || READA */ |
| if (local) { |
| if (!drbd_may_do_local_read(mdev, sector, size) || |
| remote_due_to_read_balancing(mdev, sector)) { |
| /* we could kick the syncer to |
| * sync this extent asap, wait for |
| * it, then continue locally. |
| * Or just issue the request remotely. |
| */ |
| local = 0; |
| bio_put(req->private_bio); |
| req->private_bio = NULL; |
| put_ldev(mdev); |
| } |
| } |
| remote = !local && mdev->state.pdsk >= D_UP_TO_DATE; |
| } |
| |
| /* If we have a disk, but a READA request is mapped to remote, |
| * we are R_PRIMARY, D_INCONSISTENT, SyncTarget. |
| * Just fail that READA request right here. |
| * |
| * THINK: maybe fail all READA when not local? |
| * or make this configurable... |
| * if network is slow, READA won't do any good. |
| */ |
| if (rw == READA && mdev->state.disk >= D_INCONSISTENT && !local) { |
| err = -EWOULDBLOCK; |
| goto fail_and_free_req; |
| } |
| |
| /* For WRITES going to the local disk, grab a reference on the target |
| * extent. This waits for any resync activity in the corresponding |
| * resync extent to finish, and, if necessary, pulls in the target |
| * extent into the activity log, which involves further disk io because |
| * of transactional on-disk meta data updates. */ |
| if (rw == WRITE && local && !test_bit(AL_SUSPENDED, &mdev->flags)) { |
| req->rq_state |= RQ_IN_ACT_LOG; |
| drbd_al_begin_io(mdev, &req->i); |
| } |
| |
| s = mdev->state; |
| remote = remote && drbd_should_do_remote(s); |
| send_oos = rw == WRITE && drbd_should_send_out_of_sync(s); |
| D_ASSERT(!(remote && send_oos)); |
| |
| if (!(local || remote) && !drbd_suspended(mdev)) { |
| if (__ratelimit(&drbd_ratelimit_state)) |
| dev_err(DEV, "IO ERROR: neither local nor remote disk\n"); |
| err = -EIO; |
| goto fail_free_complete; |
| } |
| |
| /* For WRITE request, we have to make sure that we have an |
| * unused_spare_tle, in case we need to start a new epoch. |
| * I try to be smart and avoid to pre-allocate always "just in case", |
| * but there is a race between testing the bit and pointer outside the |
| * spinlock, and grabbing the spinlock. |
| * if we lost that race, we retry. */ |
| if (rw == WRITE && (remote || send_oos) && |
| mdev->tconn->unused_spare_tle == NULL && |
| test_bit(CREATE_BARRIER, &mdev->tconn->flags)) { |
| allocate_barrier: |
| b = kmalloc(sizeof(struct drbd_tl_epoch), GFP_NOIO); |
| if (!b) { |
| dev_err(DEV, "Failed to alloc barrier.\n"); |
| err = -ENOMEM; |
| goto fail_free_complete; |
| } |
| } |
| |
| /* GOOD, everything prepared, grab the spin_lock */ |
| spin_lock_irq(&mdev->tconn->req_lock); |
| |
| if (rw == WRITE) { |
| /* This may temporarily give up the req_lock, |
| * but will re-aquire it before it returns here. |
| * Needs to be before the check on drbd_suspended() */ |
| complete_conflicting_writes(req); |
| } |
| |
| if (drbd_suspended(mdev)) { |
| /* If we got suspended, use the retry mechanism in |
| drbd_make_request() to restart processing of this |
| bio. In the next call to drbd_make_request |
| we sleep in inc_ap_bio() */ |
| ret = 1; |
| spin_unlock_irq(&mdev->tconn->req_lock); |
| goto fail_free_complete; |
| } |
| |
| if (remote || send_oos) { |
| remote = drbd_should_do_remote(mdev->state); |
| send_oos = rw == WRITE && drbd_should_send_out_of_sync(mdev->state); |
| D_ASSERT(!(remote && send_oos)); |
| |
| if (!(remote || send_oos)) |
| dev_warn(DEV, "lost connection while grabbing the req_lock!\n"); |
| if (!(local || remote)) { |
| dev_err(DEV, "IO ERROR: neither local nor remote disk\n"); |
| spin_unlock_irq(&mdev->tconn->req_lock); |
| err = -EIO; |
| goto fail_free_complete; |
| } |
| } |
| |
| if (b && mdev->tconn->unused_spare_tle == NULL) { |
| mdev->tconn->unused_spare_tle = b; |
| b = NULL; |
| } |
| if (rw == WRITE && (remote || send_oos) && |
| mdev->tconn->unused_spare_tle == NULL && |
| test_bit(CREATE_BARRIER, &mdev->tconn->flags)) { |
| /* someone closed the current epoch |
| * while we were grabbing the spinlock */ |
| spin_unlock_irq(&mdev->tconn->req_lock); |
| goto allocate_barrier; |
| } |
| |
| |
| /* Update disk stats */ |
| _drbd_start_io_acct(mdev, req, bio); |
| |
| /* _maybe_start_new_epoch(mdev); |
| * If we need to generate a write barrier packet, we have to add the |
| * new epoch (barrier) object, and queue the barrier packet for sending, |
| * and queue the req's data after it _within the same lock_, otherwise |
| * we have race conditions were the reorder domains could be mixed up. |
| * |
| * Even read requests may start a new epoch and queue the corresponding |
| * barrier packet. To get the write ordering right, we only have to |
| * make sure that, if this is a write request and it triggered a |
| * barrier packet, this request is queued within the same spinlock. */ |
| if ((remote || send_oos) && mdev->tconn->unused_spare_tle && |
| test_and_clear_bit(CREATE_BARRIER, &mdev->tconn->flags)) { |
| _tl_add_barrier(mdev->tconn, mdev->tconn->unused_spare_tle); |
| mdev->tconn->unused_spare_tle = NULL; |
| } else { |
| D_ASSERT(!(remote && rw == WRITE && |
| test_bit(CREATE_BARRIER, &mdev->tconn->flags))); |
| } |
| |
| /* NOTE |
| * Actually, 'local' may be wrong here already, since we may have failed |
| * to write to the meta data, and may become wrong anytime because of |
| * local io-error for some other request, which would lead to us |
| * "detaching" the local disk. |
| * |
| * 'remote' may become wrong any time because the network could fail. |
| * |
| * This is a harmless race condition, though, since it is handled |
| * correctly at the appropriate places; so it just defers the failure |
| * of the respective operation. |
| */ |
| |
| /* mark them early for readability. |
| * this just sets some state flags. */ |
| if (remote) |
| _req_mod(req, TO_BE_SENT); |
| if (local) |
| _req_mod(req, TO_BE_SUBMITTED); |
| |
| list_add_tail(&req->tl_requests, &mdev->tconn->newest_tle->requests); |
| |
| /* NOTE remote first: to get the concurrent write detection right, |
| * we must register the request before start of local IO. */ |
| if (remote) { |
| /* either WRITE and C_CONNECTED, |
| * or READ, and no local disk, |
| * or READ, but not in sync. |
| */ |
| _req_mod(req, (rw == WRITE) |
| ? QUEUE_FOR_NET_WRITE |
| : QUEUE_FOR_NET_READ); |
| } |
| if (send_oos && drbd_set_out_of_sync(mdev, sector, size)) |
| _req_mod(req, QUEUE_FOR_SEND_OOS); |
| |
| rcu_read_lock(); |
| nc = rcu_dereference(mdev->tconn->net_conf); |
| if (remote && |
| nc->on_congestion != OC_BLOCK && mdev->tconn->agreed_pro_version >= 96) { |
| int congested = 0; |
| |
| if (nc->cong_fill && |
| atomic_read(&mdev->ap_in_flight) >= nc->cong_fill) { |
| dev_info(DEV, "Congestion-fill threshold reached\n"); |
| congested = 1; |
| } |
| |
| if (mdev->act_log->used >= nc->cong_extents) { |
| dev_info(DEV, "Congestion-extents threshold reached\n"); |
| congested = 1; |
| } |
| |
| if (congested) { |
| queue_barrier(mdev); /* last barrier, after mirrored writes */ |
| |
| if (nc->on_congestion == OC_PULL_AHEAD) |
| _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL); |
| else /*nc->on_congestion == OC_DISCONNECT */ |
| _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL); |
| } |
| } |
| rcu_read_unlock(); |
| |
| spin_unlock_irq(&mdev->tconn->req_lock); |
| kfree(b); /* if someone else has beaten us to it... */ |
| |
| if (local) { |
| req->private_bio->bi_bdev = mdev->ldev->backing_bdev; |
| |
| /* State may have changed since we grabbed our reference on the |
| * mdev->ldev member. Double check, and short-circuit to endio. |
| * In case the last activity log transaction failed to get on |
| * stable storage, and this is a WRITE, we may not even submit |
| * this bio. */ |
| if (get_ldev(mdev)) { |
| if (drbd_insert_fault(mdev, rw == WRITE ? DRBD_FAULT_DT_WR |
| : rw == READ ? DRBD_FAULT_DT_RD |
| : DRBD_FAULT_DT_RA)) |
| bio_endio(req->private_bio, -EIO); |
| else |
| generic_make_request(req->private_bio); |
| put_ldev(mdev); |
| } else |
| bio_endio(req->private_bio, -EIO); |
| } |
| |
| return 0; |
| |
| fail_free_complete: |
| if (req->rq_state & RQ_IN_ACT_LOG) |
| drbd_al_complete_io(mdev, &req->i); |
| fail_and_free_req: |
| if (local) { |
| bio_put(req->private_bio); |
| req->private_bio = NULL; |
| put_ldev(mdev); |
| } |
| if (!ret) |
| bio_endio(bio, err); |
| |
| drbd_req_free(req); |
| dec_ap_bio(mdev); |
| kfree(b); |
| |
| return ret; |
| } |
| |
| int drbd_make_request(struct request_queue *q, struct bio *bio) |
| { |
| struct drbd_conf *mdev = (struct drbd_conf *) q->queuedata; |
| unsigned long start_time; |
| |
| start_time = jiffies; |
| |
| /* |
| * what we "blindly" assume: |
| */ |
| D_ASSERT(bio->bi_size > 0); |
| D_ASSERT(IS_ALIGNED(bio->bi_size, 512)); |
| |
| do { |
| inc_ap_bio(mdev); |
| } while (__drbd_make_request(mdev, bio, start_time)); |
| |
| return 0; |
| } |
| |
| /* This is called by bio_add_page(). |
| * |
| * q->max_hw_sectors and other global limits are already enforced there. |
| * |
| * We need to call down to our lower level device, |
| * in case it has special restrictions. |
| * |
| * We also may need to enforce configured max-bio-bvecs limits. |
| * |
| * As long as the BIO is empty we have to allow at least one bvec, |
| * regardless of size and offset, so no need to ask lower levels. |
| */ |
| int drbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bvm, struct bio_vec *bvec) |
| { |
| struct drbd_conf *mdev = (struct drbd_conf *) q->queuedata; |
| unsigned int bio_size = bvm->bi_size; |
| int limit = DRBD_MAX_BIO_SIZE; |
| int backing_limit; |
| |
| if (bio_size && get_ldev(mdev)) { |
| struct request_queue * const b = |
| mdev->ldev->backing_bdev->bd_disk->queue; |
| if (b->merge_bvec_fn) { |
| backing_limit = b->merge_bvec_fn(b, bvm, bvec); |
| limit = min(limit, backing_limit); |
| } |
| put_ldev(mdev); |
| } |
| return limit; |
| } |
| |
| void request_timer_fn(unsigned long data) |
| { |
| struct drbd_conf *mdev = (struct drbd_conf *) data; |
| struct drbd_tconn *tconn = mdev->tconn; |
| struct drbd_request *req; /* oldest request */ |
| struct list_head *le; |
| struct net_conf *nc; |
| unsigned long ent = 0, dt = 0, et, nt; /* effective timeout = ko_count * timeout */ |
| |
| rcu_read_lock(); |
| nc = rcu_dereference(tconn->net_conf); |
| ent = nc ? nc->timeout * HZ/10 * nc->ko_count : 0; |
| |
| if (get_ldev(mdev)) { |
| dt = rcu_dereference(mdev->ldev->disk_conf)->disk_timeout * HZ / 10; |
| put_ldev(mdev); |
| } |
| rcu_read_unlock(); |
| |
| et = min_not_zero(dt, ent); |
| |
| if (!et || (mdev->state.conn < C_WF_REPORT_PARAMS && mdev->state.disk <= D_FAILED)) |
| return; /* Recurring timer stopped */ |
| |
| spin_lock_irq(&tconn->req_lock); |
| le = &tconn->oldest_tle->requests; |
| if (list_empty(le)) { |
| spin_unlock_irq(&tconn->req_lock); |
| mod_timer(&mdev->request_timer, jiffies + et); |
| return; |
| } |
| |
| le = le->prev; |
| req = list_entry(le, struct drbd_request, tl_requests); |
| if (ent && req->rq_state & RQ_NET_PENDING) { |
| if (time_is_before_eq_jiffies(req->start_time + ent)) { |
| dev_warn(DEV, "Remote failed to finish a request within ko-count * timeout\n"); |
| _drbd_set_state(_NS(mdev, conn, C_TIMEOUT), CS_VERBOSE | CS_HARD, NULL); |
| } |
| } |
| if (dt && req->rq_state & RQ_LOCAL_PENDING && req->w.mdev == mdev) { |
| if (time_is_before_eq_jiffies(req->start_time + dt)) { |
| dev_warn(DEV, "Local backing device failed to meet the disk-timeout\n"); |
| __drbd_chk_io_error(mdev, 1); |
| } |
| } |
| nt = (time_is_before_eq_jiffies(req->start_time + et) ? jiffies : req->start_time) + et; |
| spin_unlock_irq(&tconn->req_lock); |
| mod_timer(&mdev->request_timer, nt); |
| } |