| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved. |
| */ |
| |
| |
| /* |
| * Cross Partition Communication (XPC) support - standard version. |
| * |
| * XPC provides a message passing capability that crosses partition |
| * boundaries. This module is made up of two parts: |
| * |
| * partition This part detects the presence/absence of other |
| * partitions. It provides a heartbeat and monitors |
| * the heartbeats of other partitions. |
| * |
| * channel This part manages the channels and sends/receives |
| * messages across them to/from other partitions. |
| * |
| * There are a couple of additional functions residing in XP, which |
| * provide an interface to XPC for its users. |
| * |
| * |
| * Caveats: |
| * |
| * . We currently have no way to determine which nasid an IPI came |
| * from. Thus, xpc_IPI_send() does a remote AMO write followed by |
| * an IPI. The AMO indicates where data is to be pulled from, so |
| * after the IPI arrives, the remote partition checks the AMO word. |
| * The IPI can actually arrive before the AMO however, so other code |
| * must periodically check for this case. Also, remote AMO operations |
| * do not reliably time out. Thus we do a remote PIO read solely to |
| * know whether the remote partition is down and whether we should |
| * stop sending IPIs to it. This remote PIO read operation is set up |
| * in a special nofault region so SAL knows to ignore (and cleanup) |
| * any errors due to the remote AMO write, PIO read, and/or PIO |
| * write operations. |
| * |
| * If/when new hardware solves this IPI problem, we should abandon |
| * the current approach. |
| * |
| */ |
| |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/syscalls.h> |
| #include <linux/cache.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/reboot.h> |
| #include <asm/sn/intr.h> |
| #include <asm/sn/sn_sal.h> |
| #include <asm/kdebug.h> |
| #include <asm/uaccess.h> |
| #include <asm/sn/xpc.h> |
| |
| |
| /* define two XPC debug device structures to be used with dev_dbg() et al */ |
| |
| struct device_driver xpc_dbg_name = { |
| .name = "xpc" |
| }; |
| |
| struct device xpc_part_dbg_subname = { |
| .bus_id = {0}, /* set to "part" at xpc_init() time */ |
| .driver = &xpc_dbg_name |
| }; |
| |
| struct device xpc_chan_dbg_subname = { |
| .bus_id = {0}, /* set to "chan" at xpc_init() time */ |
| .driver = &xpc_dbg_name |
| }; |
| |
| struct device *xpc_part = &xpc_part_dbg_subname; |
| struct device *xpc_chan = &xpc_chan_dbg_subname; |
| |
| |
| static int xpc_kdebug_ignore; |
| |
| |
| /* systune related variables for /proc/sys directories */ |
| |
| static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL; |
| static int xpc_hb_min_interval = 1; |
| static int xpc_hb_max_interval = 10; |
| |
| static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; |
| static int xpc_hb_check_min_interval = 10; |
| static int xpc_hb_check_max_interval = 120; |
| |
| int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT; |
| static int xpc_disengage_request_min_timelimit = 0; |
| static int xpc_disengage_request_max_timelimit = 120; |
| |
| static ctl_table xpc_sys_xpc_hb_dir[] = { |
| { |
| 1, |
| "hb_interval", |
| &xpc_hb_interval, |
| sizeof(int), |
| 0644, |
| NULL, |
| &proc_dointvec_minmax, |
| &sysctl_intvec, |
| NULL, |
| &xpc_hb_min_interval, |
| &xpc_hb_max_interval |
| }, |
| { |
| 2, |
| "hb_check_interval", |
| &xpc_hb_check_interval, |
| sizeof(int), |
| 0644, |
| NULL, |
| &proc_dointvec_minmax, |
| &sysctl_intvec, |
| NULL, |
| &xpc_hb_check_min_interval, |
| &xpc_hb_check_max_interval |
| }, |
| {0} |
| }; |
| static ctl_table xpc_sys_xpc_dir[] = { |
| { |
| 1, |
| "hb", |
| NULL, |
| 0, |
| 0555, |
| xpc_sys_xpc_hb_dir |
| }, |
| { |
| 2, |
| "disengage_request_timelimit", |
| &xpc_disengage_request_timelimit, |
| sizeof(int), |
| 0644, |
| NULL, |
| &proc_dointvec_minmax, |
| &sysctl_intvec, |
| NULL, |
| &xpc_disengage_request_min_timelimit, |
| &xpc_disengage_request_max_timelimit |
| }, |
| {0} |
| }; |
| static ctl_table xpc_sys_dir[] = { |
| { |
| 1, |
| "xpc", |
| NULL, |
| 0, |
| 0555, |
| xpc_sys_xpc_dir |
| }, |
| {0} |
| }; |
| static struct ctl_table_header *xpc_sysctl; |
| |
| /* non-zero if any remote partition disengage request was timed out */ |
| int xpc_disengage_request_timedout; |
| |
| /* #of IRQs received */ |
| static atomic_t xpc_act_IRQ_rcvd; |
| |
| /* IRQ handler notifies this wait queue on receipt of an IRQ */ |
| static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); |
| |
| static unsigned long xpc_hb_check_timeout; |
| |
| /* notification that the xpc_hb_checker thread has exited */ |
| static DECLARE_MUTEX_LOCKED(xpc_hb_checker_exited); |
| |
| /* notification that the xpc_discovery thread has exited */ |
| static DECLARE_MUTEX_LOCKED(xpc_discovery_exited); |
| |
| |
| static struct timer_list xpc_hb_timer; |
| |
| |
| static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *); |
| |
| |
| static int xpc_system_reboot(struct notifier_block *, unsigned long, void *); |
| static struct notifier_block xpc_reboot_notifier = { |
| .notifier_call = xpc_system_reboot, |
| }; |
| |
| static int xpc_system_die(struct notifier_block *, unsigned long, void *); |
| static struct notifier_block xpc_die_notifier = { |
| .notifier_call = xpc_system_die, |
| }; |
| |
| |
| /* |
| * Timer function to enforce the timelimit on the partition disengage request. |
| */ |
| static void |
| xpc_timeout_partition_disengage_request(unsigned long data) |
| { |
| struct xpc_partition *part = (struct xpc_partition *) data; |
| |
| |
| DBUG_ON(jiffies < part->disengage_request_timeout); |
| |
| (void) xpc_partition_disengaged(part); |
| |
| DBUG_ON(part->disengage_request_timeout != 0); |
| DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0); |
| } |
| |
| |
| /* |
| * Notify the heartbeat check thread that an IRQ has been received. |
| */ |
| static irqreturn_t |
| xpc_act_IRQ_handler(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| atomic_inc(&xpc_act_IRQ_rcvd); |
| wake_up_interruptible(&xpc_act_IRQ_wq); |
| return IRQ_HANDLED; |
| } |
| |
| |
| /* |
| * Timer to produce the heartbeat. The timer structures function is |
| * already set when this is initially called. A tunable is used to |
| * specify when the next timeout should occur. |
| */ |
| static void |
| xpc_hb_beater(unsigned long dummy) |
| { |
| xpc_vars->heartbeat++; |
| |
| if (jiffies >= xpc_hb_check_timeout) { |
| wake_up_interruptible(&xpc_act_IRQ_wq); |
| } |
| |
| xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ); |
| add_timer(&xpc_hb_timer); |
| } |
| |
| |
| /* |
| * This thread is responsible for nearly all of the partition |
| * activation/deactivation. |
| */ |
| static int |
| xpc_hb_checker(void *ignore) |
| { |
| int last_IRQ_count = 0; |
| int new_IRQ_count; |
| int force_IRQ=0; |
| |
| |
| /* this thread was marked active by xpc_hb_init() */ |
| |
| daemonize(XPC_HB_CHECK_THREAD_NAME); |
| |
| set_cpus_allowed(current, cpumask_of_cpu(XPC_HB_CHECK_CPU)); |
| |
| xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); |
| |
| while (!(volatile int) xpc_exiting) { |
| |
| dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " |
| "been received\n", |
| (int) (xpc_hb_check_timeout - jiffies), |
| atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count); |
| |
| |
| /* checking of remote heartbeats is skewed by IRQ handling */ |
| if (jiffies >= xpc_hb_check_timeout) { |
| dev_dbg(xpc_part, "checking remote heartbeats\n"); |
| xpc_check_remote_hb(); |
| |
| /* |
| * We need to periodically recheck to ensure no |
| * IPI/AMO pairs have been missed. That check |
| * must always reset xpc_hb_check_timeout. |
| */ |
| force_IRQ = 1; |
| } |
| |
| |
| /* check for outstanding IRQs */ |
| new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd); |
| if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) { |
| force_IRQ = 0; |
| |
| dev_dbg(xpc_part, "found an IRQ to process; will be " |
| "resetting xpc_hb_check_timeout\n"); |
| |
| last_IRQ_count += xpc_identify_act_IRQ_sender(); |
| if (last_IRQ_count < new_IRQ_count) { |
| /* retry once to help avoid missing AMO */ |
| (void) xpc_identify_act_IRQ_sender(); |
| } |
| last_IRQ_count = new_IRQ_count; |
| |
| xpc_hb_check_timeout = jiffies + |
| (xpc_hb_check_interval * HZ); |
| } |
| |
| /* wait for IRQ or timeout */ |
| (void) wait_event_interruptible(xpc_act_IRQ_wq, |
| (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) || |
| jiffies >= xpc_hb_check_timeout || |
| (volatile int) xpc_exiting)); |
| } |
| |
| dev_dbg(xpc_part, "heartbeat checker is exiting\n"); |
| |
| |
| /* mark this thread as having exited */ |
| up(&xpc_hb_checker_exited); |
| return 0; |
| } |
| |
| |
| /* |
| * This thread will attempt to discover other partitions to activate |
| * based on info provided by SAL. This new thread is short lived and |
| * will exit once discovery is complete. |
| */ |
| static int |
| xpc_initiate_discovery(void *ignore) |
| { |
| daemonize(XPC_DISCOVERY_THREAD_NAME); |
| |
| xpc_discovery(); |
| |
| dev_dbg(xpc_part, "discovery thread is exiting\n"); |
| |
| /* mark this thread as having exited */ |
| up(&xpc_discovery_exited); |
| return 0; |
| } |
| |
| |
| /* |
| * Establish first contact with the remote partititon. This involves pulling |
| * the XPC per partition variables from the remote partition and waiting for |
| * the remote partition to pull ours. |
| */ |
| static enum xpc_retval |
| xpc_make_first_contact(struct xpc_partition *part) |
| { |
| enum xpc_retval ret; |
| |
| |
| while ((ret = xpc_pull_remote_vars_part(part)) != xpcSuccess) { |
| if (ret != xpcRetry) { |
| XPC_DEACTIVATE_PARTITION(part, ret); |
| return ret; |
| } |
| |
| dev_dbg(xpc_chan, "waiting to make first contact with " |
| "partition %d\n", XPC_PARTID(part)); |
| |
| /* wait a 1/4 of a second or so */ |
| (void) msleep_interruptible(250); |
| |
| if (part->act_state == XPC_P_DEACTIVATING) { |
| return part->reason; |
| } |
| } |
| |
| return xpc_mark_partition_active(part); |
| } |
| |
| |
| /* |
| * The first kthread assigned to a newly activated partition is the one |
| * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to |
| * that kthread until the partition is brought down, at which time that kthread |
| * returns back to XPC HB. (The return of that kthread will signify to XPC HB |
| * that XPC has dismantled all communication infrastructure for the associated |
| * partition.) This kthread becomes the channel manager for that partition. |
| * |
| * Each active partition has a channel manager, who, besides connecting and |
| * disconnecting channels, will ensure that each of the partition's connected |
| * channels has the required number of assigned kthreads to get the work done. |
| */ |
| static void |
| xpc_channel_mgr(struct xpc_partition *part) |
| { |
| while (part->act_state != XPC_P_DEACTIVATING || |
| atomic_read(&part->nchannels_active) > 0 || |
| !xpc_partition_disengaged(part)) { |
| |
| xpc_process_channel_activity(part); |
| |
| |
| /* |
| * Wait until we've been requested to activate kthreads or |
| * all of the channel's message queues have been torn down or |
| * a signal is pending. |
| * |
| * The channel_mgr_requests is set to 1 after being awakened, |
| * This is done to prevent the channel mgr from making one pass |
| * through the loop for each request, since he will |
| * be servicing all the requests in one pass. The reason it's |
| * set to 1 instead of 0 is so that other kthreads will know |
| * that the channel mgr is running and won't bother trying to |
| * wake him up. |
| */ |
| atomic_dec(&part->channel_mgr_requests); |
| (void) wait_event_interruptible(part->channel_mgr_wq, |
| (atomic_read(&part->channel_mgr_requests) > 0 || |
| (volatile u64) part->local_IPI_amo != 0 || |
| ((volatile u8) part->act_state == |
| XPC_P_DEACTIVATING && |
| atomic_read(&part->nchannels_active) == 0 && |
| xpc_partition_disengaged(part)))); |
| atomic_set(&part->channel_mgr_requests, 1); |
| |
| // >>> Does it need to wakeup periodically as well? In case we |
| // >>> miscalculated the #of kthreads to wakeup or create? |
| } |
| } |
| |
| |
| /* |
| * When XPC HB determines that a partition has come up, it will create a new |
| * kthread and that kthread will call this function to attempt to set up the |
| * basic infrastructure used for Cross Partition Communication with the newly |
| * upped partition. |
| * |
| * The kthread that was created by XPC HB and which setup the XPC |
| * infrastructure will remain assigned to the partition until the partition |
| * goes down. At which time the kthread will teardown the XPC infrastructure |
| * and then exit. |
| * |
| * XPC HB will put the remote partition's XPC per partition specific variables |
| * physical address into xpc_partitions[partid].remote_vars_part_pa prior to |
| * calling xpc_partition_up(). |
| */ |
| static void |
| xpc_partition_up(struct xpc_partition *part) |
| { |
| DBUG_ON(part->channels != NULL); |
| |
| dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part)); |
| |
| if (xpc_setup_infrastructure(part) != xpcSuccess) { |
| return; |
| } |
| |
| /* |
| * The kthread that XPC HB called us with will become the |
| * channel manager for this partition. It will not return |
| * back to XPC HB until the partition's XPC infrastructure |
| * has been dismantled. |
| */ |
| |
| (void) xpc_part_ref(part); /* this will always succeed */ |
| |
| if (xpc_make_first_contact(part) == xpcSuccess) { |
| xpc_channel_mgr(part); |
| } |
| |
| xpc_part_deref(part); |
| |
| xpc_teardown_infrastructure(part); |
| } |
| |
| |
| static int |
| xpc_activating(void *__partid) |
| { |
| partid_t partid = (u64) __partid; |
| struct xpc_partition *part = &xpc_partitions[partid]; |
| unsigned long irq_flags; |
| struct sched_param param = { sched_priority: MAX_RT_PRIO - 1 }; |
| int ret; |
| |
| |
| DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); |
| |
| spin_lock_irqsave(&part->act_lock, irq_flags); |
| |
| if (part->act_state == XPC_P_DEACTIVATING) { |
| part->act_state = XPC_P_INACTIVE; |
| spin_unlock_irqrestore(&part->act_lock, irq_flags); |
| part->remote_rp_pa = 0; |
| return 0; |
| } |
| |
| /* indicate the thread is activating */ |
| DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ); |
| part->act_state = XPC_P_ACTIVATING; |
| |
| XPC_SET_REASON(part, 0, 0); |
| spin_unlock_irqrestore(&part->act_lock, irq_flags); |
| |
| dev_dbg(xpc_part, "bringing partition %d up\n", partid); |
| |
| daemonize("xpc%02d", partid); |
| |
| /* |
| * This thread needs to run at a realtime priority to prevent a |
| * significant performance degradation. |
| */ |
| ret = sched_setscheduler(current, SCHED_FIFO, ¶m); |
| if (ret != 0) { |
| dev_warn(xpc_part, "unable to set pid %d to a realtime " |
| "priority, ret=%d\n", current->pid, ret); |
| } |
| |
| /* allow this thread and its children to run on any CPU */ |
| set_cpus_allowed(current, CPU_MASK_ALL); |
| |
| /* |
| * Register the remote partition's AMOs with SAL so it can handle |
| * and cleanup errors within that address range should the remote |
| * partition go down. We don't unregister this range because it is |
| * difficult to tell when outstanding writes to the remote partition |
| * are finished and thus when it is safe to unregister. This should |
| * not result in wasted space in the SAL xp_addr_region table because |
| * we should get the same page for remote_amos_page_pa after module |
| * reloads and system reboots. |
| */ |
| if (sn_register_xp_addr_region(part->remote_amos_page_pa, |
| PAGE_SIZE, 1) < 0) { |
| dev_warn(xpc_part, "xpc_partition_up(%d) failed to register " |
| "xp_addr region\n", partid); |
| |
| spin_lock_irqsave(&part->act_lock, irq_flags); |
| part->act_state = XPC_P_INACTIVE; |
| XPC_SET_REASON(part, xpcPhysAddrRegFailed, __LINE__); |
| spin_unlock_irqrestore(&part->act_lock, irq_flags); |
| part->remote_rp_pa = 0; |
| return 0; |
| } |
| |
| xpc_allow_hb(partid, xpc_vars); |
| xpc_IPI_send_activated(part); |
| |
| |
| /* |
| * xpc_partition_up() holds this thread and marks this partition as |
| * XPC_P_ACTIVE by calling xpc_hb_mark_active(). |
| */ |
| (void) xpc_partition_up(part); |
| |
| xpc_disallow_hb(partid, xpc_vars); |
| xpc_mark_partition_inactive(part); |
| |
| if (part->reason == xpcReactivating) { |
| /* interrupting ourselves results in activating partition */ |
| xpc_IPI_send_reactivate(part); |
| } |
| |
| return 0; |
| } |
| |
| |
| void |
| xpc_activate_partition(struct xpc_partition *part) |
| { |
| partid_t partid = XPC_PARTID(part); |
| unsigned long irq_flags; |
| pid_t pid; |
| |
| |
| spin_lock_irqsave(&part->act_lock, irq_flags); |
| |
| pid = kernel_thread(xpc_activating, (void *) ((u64) partid), 0); |
| |
| DBUG_ON(part->act_state != XPC_P_INACTIVE); |
| |
| if (pid > 0) { |
| part->act_state = XPC_P_ACTIVATION_REQ; |
| XPC_SET_REASON(part, xpcCloneKThread, __LINE__); |
| } else { |
| XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__); |
| } |
| |
| spin_unlock_irqrestore(&part->act_lock, irq_flags); |
| } |
| |
| |
| /* |
| * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified |
| * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more |
| * than one partition, we use an AMO_t structure per partition to indicate |
| * whether a partition has sent an IPI or not. >>> If it has, then wake up the |
| * associated kthread to handle it. |
| * |
| * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC |
| * running on other partitions. |
| * |
| * Noteworthy Arguments: |
| * |
| * irq - Interrupt ReQuest number. NOT USED. |
| * |
| * dev_id - partid of IPI's potential sender. |
| * |
| * regs - processor's context before the processor entered |
| * interrupt code. NOT USED. |
| */ |
| irqreturn_t |
| xpc_notify_IRQ_handler(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| partid_t partid = (partid_t) (u64) dev_id; |
| struct xpc_partition *part = &xpc_partitions[partid]; |
| |
| |
| DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); |
| |
| if (xpc_part_ref(part)) { |
| xpc_check_for_channel_activity(part); |
| |
| xpc_part_deref(part); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| |
| /* |
| * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor |
| * because the write to their associated IPI amo completed after the IRQ/IPI |
| * was received. |
| */ |
| void |
| xpc_dropped_IPI_check(struct xpc_partition *part) |
| { |
| if (xpc_part_ref(part)) { |
| xpc_check_for_channel_activity(part); |
| |
| part->dropped_IPI_timer.expires = jiffies + |
| XPC_P_DROPPED_IPI_WAIT; |
| add_timer(&part->dropped_IPI_timer); |
| xpc_part_deref(part); |
| } |
| } |
| |
| |
| void |
| xpc_activate_kthreads(struct xpc_channel *ch, int needed) |
| { |
| int idle = atomic_read(&ch->kthreads_idle); |
| int assigned = atomic_read(&ch->kthreads_assigned); |
| int wakeup; |
| |
| |
| DBUG_ON(needed <= 0); |
| |
| if (idle > 0) { |
| wakeup = (needed > idle) ? idle : needed; |
| needed -= wakeup; |
| |
| dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, " |
| "channel=%d\n", wakeup, ch->partid, ch->number); |
| |
| /* only wakeup the requested number of kthreads */ |
| wake_up_nr(&ch->idle_wq, wakeup); |
| } |
| |
| if (needed <= 0) { |
| return; |
| } |
| |
| if (needed + assigned > ch->kthreads_assigned_limit) { |
| needed = ch->kthreads_assigned_limit - assigned; |
| // >>>should never be less than 0 |
| if (needed <= 0) { |
| return; |
| } |
| } |
| |
| dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n", |
| needed, ch->partid, ch->number); |
| |
| xpc_create_kthreads(ch, needed); |
| } |
| |
| |
| /* |
| * This function is where XPC's kthreads wait for messages to deliver. |
| */ |
| static void |
| xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) |
| { |
| do { |
| /* deliver messages to their intended recipients */ |
| |
| while ((volatile s64) ch->w_local_GP.get < |
| (volatile s64) ch->w_remote_GP.put && |
| !((volatile u32) ch->flags & |
| XPC_C_DISCONNECTING)) { |
| xpc_deliver_msg(ch); |
| } |
| |
| if (atomic_inc_return(&ch->kthreads_idle) > |
| ch->kthreads_idle_limit) { |
| /* too many idle kthreads on this channel */ |
| atomic_dec(&ch->kthreads_idle); |
| break; |
| } |
| |
| dev_dbg(xpc_chan, "idle kthread calling " |
| "wait_event_interruptible_exclusive()\n"); |
| |
| (void) wait_event_interruptible_exclusive(ch->idle_wq, |
| ((volatile s64) ch->w_local_GP.get < |
| (volatile s64) ch->w_remote_GP.put || |
| ((volatile u32) ch->flags & |
| XPC_C_DISCONNECTING))); |
| |
| atomic_dec(&ch->kthreads_idle); |
| |
| } while (!((volatile u32) ch->flags & XPC_C_DISCONNECTING)); |
| } |
| |
| |
| static int |
| xpc_daemonize_kthread(void *args) |
| { |
| partid_t partid = XPC_UNPACK_ARG1(args); |
| u16 ch_number = XPC_UNPACK_ARG2(args); |
| struct xpc_partition *part = &xpc_partitions[partid]; |
| struct xpc_channel *ch; |
| int n_needed; |
| unsigned long irq_flags; |
| |
| |
| daemonize("xpc%02dc%d", partid, ch_number); |
| |
| dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n", |
| partid, ch_number); |
| |
| ch = &part->channels[ch_number]; |
| |
| if (!(ch->flags & XPC_C_DISCONNECTING)) { |
| |
| /* let registerer know that connection has been established */ |
| |
| spin_lock_irqsave(&ch->lock, irq_flags); |
| if (!(ch->flags & XPC_C_CONNECTCALLOUT)) { |
| ch->flags |= XPC_C_CONNECTCALLOUT; |
| spin_unlock_irqrestore(&ch->lock, irq_flags); |
| |
| xpc_connected_callout(ch); |
| |
| /* |
| * It is possible that while the callout was being |
| * made that the remote partition sent some messages. |
| * If that is the case, we may need to activate |
| * additional kthreads to help deliver them. We only |
| * need one less than total #of messages to deliver. |
| */ |
| n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1; |
| if (n_needed > 0 && |
| !(ch->flags & XPC_C_DISCONNECTING)) { |
| xpc_activate_kthreads(ch, n_needed); |
| } |
| } else { |
| spin_unlock_irqrestore(&ch->lock, irq_flags); |
| } |
| |
| xpc_kthread_waitmsgs(part, ch); |
| } |
| |
| if (atomic_dec_return(&ch->kthreads_assigned) == 0) { |
| spin_lock_irqsave(&ch->lock, irq_flags); |
| if ((ch->flags & XPC_C_CONNECTCALLOUT) && |
| !(ch->flags & XPC_C_DISCONNECTCALLOUT)) { |
| ch->flags |= XPC_C_DISCONNECTCALLOUT; |
| spin_unlock_irqrestore(&ch->lock, irq_flags); |
| |
| xpc_disconnect_callout(ch, xpcDisconnecting); |
| } else { |
| spin_unlock_irqrestore(&ch->lock, irq_flags); |
| } |
| if (atomic_dec_return(&part->nchannels_engaged) == 0) { |
| xpc_mark_partition_disengaged(part); |
| xpc_IPI_send_disengage(part); |
| } |
| } |
| |
| |
| xpc_msgqueue_deref(ch); |
| |
| dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n", |
| partid, ch_number); |
| |
| xpc_part_deref(part); |
| return 0; |
| } |
| |
| |
| /* |
| * For each partition that XPC has established communications with, there is |
| * a minimum of one kernel thread assigned to perform any operation that |
| * may potentially sleep or block (basically the callouts to the asynchronous |
| * functions registered via xpc_connect()). |
| * |
| * Additional kthreads are created and destroyed by XPC as the workload |
| * demands. |
| * |
| * A kthread is assigned to one of the active channels that exists for a given |
| * partition. |
| */ |
| void |
| xpc_create_kthreads(struct xpc_channel *ch, int needed) |
| { |
| unsigned long irq_flags; |
| pid_t pid; |
| u64 args = XPC_PACK_ARGS(ch->partid, ch->number); |
| struct xpc_partition *part = &xpc_partitions[ch->partid]; |
| |
| |
| while (needed-- > 0) { |
| |
| /* |
| * The following is done on behalf of the newly created |
| * kthread. That kthread is responsible for doing the |
| * counterpart to the following before it exits. |
| */ |
| (void) xpc_part_ref(part); |
| xpc_msgqueue_ref(ch); |
| if (atomic_inc_return(&ch->kthreads_assigned) == 1 && |
| atomic_inc_return(&part->nchannels_engaged) == 1) { |
| xpc_mark_partition_engaged(part); |
| } |
| |
| pid = kernel_thread(xpc_daemonize_kthread, (void *) args, 0); |
| if (pid < 0) { |
| /* the fork failed */ |
| if (atomic_dec_return(&ch->kthreads_assigned) == 0 && |
| atomic_dec_return(&part->nchannels_engaged) == 0) { |
| xpc_mark_partition_disengaged(part); |
| xpc_IPI_send_disengage(part); |
| } |
| xpc_msgqueue_deref(ch); |
| xpc_part_deref(part); |
| |
| if (atomic_read(&ch->kthreads_assigned) < |
| ch->kthreads_idle_limit) { |
| /* |
| * Flag this as an error only if we have an |
| * insufficient #of kthreads for the channel |
| * to function. |
| * |
| * No xpc_msgqueue_ref() is needed here since |
| * the channel mgr is doing this. |
| */ |
| spin_lock_irqsave(&ch->lock, irq_flags); |
| XPC_DISCONNECT_CHANNEL(ch, xpcLackOfResources, |
| &irq_flags); |
| spin_unlock_irqrestore(&ch->lock, irq_flags); |
| } |
| break; |
| } |
| |
| ch->kthreads_created++; // >>> temporary debug only!!! |
| } |
| } |
| |
| |
| void |
| xpc_disconnect_wait(int ch_number) |
| { |
| unsigned long irq_flags; |
| partid_t partid; |
| struct xpc_partition *part; |
| struct xpc_channel *ch; |
| int wakeup_channel_mgr; |
| |
| |
| /* now wait for all callouts to the caller's function to cease */ |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { |
| part = &xpc_partitions[partid]; |
| |
| if (!xpc_part_ref(part)) { |
| continue; |
| } |
| |
| ch = &part->channels[ch_number]; |
| |
| if (!(ch->flags & XPC_C_WDISCONNECT)) { |
| xpc_part_deref(part); |
| continue; |
| } |
| |
| (void) down(&ch->wdisconnect_sema); |
| |
| spin_lock_irqsave(&ch->lock, irq_flags); |
| DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); |
| wakeup_channel_mgr = 0; |
| |
| if (ch->delayed_IPI_flags) { |
| if (part->act_state != XPC_P_DEACTIVATING) { |
| spin_lock(&part->IPI_lock); |
| XPC_SET_IPI_FLAGS(part->local_IPI_amo, |
| ch->number, ch->delayed_IPI_flags); |
| spin_unlock(&part->IPI_lock); |
| wakeup_channel_mgr = 1; |
| } |
| ch->delayed_IPI_flags = 0; |
| } |
| |
| ch->flags &= ~XPC_C_WDISCONNECT; |
| spin_unlock_irqrestore(&ch->lock, irq_flags); |
| |
| if (wakeup_channel_mgr) { |
| xpc_wakeup_channel_mgr(part); |
| } |
| |
| xpc_part_deref(part); |
| } |
| } |
| |
| |
| static void |
| xpc_do_exit(enum xpc_retval reason) |
| { |
| partid_t partid; |
| int active_part_count, printed_waiting_msg = 0; |
| struct xpc_partition *part; |
| unsigned long printmsg_time, disengage_request_timeout = 0; |
| |
| |
| /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */ |
| DBUG_ON(xpc_exiting == 1); |
| |
| /* |
| * Let the heartbeat checker thread and the discovery thread |
| * (if one is running) know that they should exit. Also wake up |
| * the heartbeat checker thread in case it's sleeping. |
| */ |
| xpc_exiting = 1; |
| wake_up_interruptible(&xpc_act_IRQ_wq); |
| |
| /* ignore all incoming interrupts */ |
| free_irq(SGI_XPC_ACTIVATE, NULL); |
| |
| /* wait for the discovery thread to exit */ |
| down(&xpc_discovery_exited); |
| |
| /* wait for the heartbeat checker thread to exit */ |
| down(&xpc_hb_checker_exited); |
| |
| |
| /* sleep for a 1/3 of a second or so */ |
| (void) msleep_interruptible(300); |
| |
| |
| /* wait for all partitions to become inactive */ |
| |
| printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); |
| xpc_disengage_request_timedout = 0; |
| |
| do { |
| active_part_count = 0; |
| |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { |
| part = &xpc_partitions[partid]; |
| |
| if (xpc_partition_disengaged(part) && |
| part->act_state == XPC_P_INACTIVE) { |
| continue; |
| } |
| |
| active_part_count++; |
| |
| XPC_DEACTIVATE_PARTITION(part, reason); |
| |
| if (part->disengage_request_timeout > |
| disengage_request_timeout) { |
| disengage_request_timeout = |
| part->disengage_request_timeout; |
| } |
| } |
| |
| if (xpc_partition_engaged(-1UL)) { |
| if (time_after(jiffies, printmsg_time)) { |
| dev_info(xpc_part, "waiting for remote " |
| "partitions to disengage, timeout in " |
| "%ld seconds\n", |
| (disengage_request_timeout - jiffies) |
| / HZ); |
| printmsg_time = jiffies + |
| (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); |
| printed_waiting_msg = 1; |
| } |
| |
| } else if (active_part_count > 0) { |
| if (printed_waiting_msg) { |
| dev_info(xpc_part, "waiting for local partition" |
| " to disengage\n"); |
| printed_waiting_msg = 0; |
| } |
| |
| } else { |
| if (!xpc_disengage_request_timedout) { |
| dev_info(xpc_part, "all partitions have " |
| "disengaged\n"); |
| } |
| break; |
| } |
| |
| /* sleep for a 1/3 of a second or so */ |
| (void) msleep_interruptible(300); |
| |
| } while (1); |
| |
| DBUG_ON(xpc_partition_engaged(-1UL)); |
| |
| |
| /* indicate to others that our reserved page is uninitialized */ |
| xpc_rsvd_page->vars_pa = 0; |
| |
| /* now it's time to eliminate our heartbeat */ |
| del_timer_sync(&xpc_hb_timer); |
| DBUG_ON(xpc_vars->heartbeating_to_mask != 0); |
| |
| if (reason == xpcUnloading) { |
| /* take ourselves off of the reboot_notifier_list */ |
| (void) unregister_reboot_notifier(&xpc_reboot_notifier); |
| |
| /* take ourselves off of the die_notifier list */ |
| (void) unregister_die_notifier(&xpc_die_notifier); |
| } |
| |
| /* close down protections for IPI operations */ |
| xpc_restrict_IPI_ops(); |
| |
| |
| /* clear the interface to XPC's functions */ |
| xpc_clear_interface(); |
| |
| if (xpc_sysctl) { |
| unregister_sysctl_table(xpc_sysctl); |
| } |
| } |
| |
| |
| /* |
| * This function is called when the system is being rebooted. |
| */ |
| static int |
| xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) |
| { |
| enum xpc_retval reason; |
| |
| |
| switch (event) { |
| case SYS_RESTART: |
| reason = xpcSystemReboot; |
| break; |
| case SYS_HALT: |
| reason = xpcSystemHalt; |
| break; |
| case SYS_POWER_OFF: |
| reason = xpcSystemPoweroff; |
| break; |
| default: |
| reason = xpcSystemGoingDown; |
| } |
| |
| xpc_do_exit(reason); |
| return NOTIFY_DONE; |
| } |
| |
| |
| /* |
| * Notify other partitions to disengage from all references to our memory. |
| */ |
| static void |
| xpc_die_disengage(void) |
| { |
| struct xpc_partition *part; |
| partid_t partid; |
| unsigned long engaged; |
| long time, printmsg_time, disengage_request_timeout; |
| |
| |
| /* keep xpc_hb_checker thread from doing anything (just in case) */ |
| xpc_exiting = 1; |
| |
| xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */ |
| |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { |
| part = &xpc_partitions[partid]; |
| |
| if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part-> |
| remote_vars_version)) { |
| |
| /* just in case it was left set by an earlier XPC */ |
| xpc_clear_partition_engaged(1UL << partid); |
| continue; |
| } |
| |
| if (xpc_partition_engaged(1UL << partid) || |
| part->act_state != XPC_P_INACTIVE) { |
| xpc_request_partition_disengage(part); |
| xpc_mark_partition_disengaged(part); |
| xpc_IPI_send_disengage(part); |
| } |
| } |
| |
| time = rtc_time(); |
| printmsg_time = time + |
| (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second); |
| disengage_request_timeout = time + |
| (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second); |
| |
| /* wait for all other partitions to disengage from us */ |
| |
| while (1) { |
| engaged = xpc_partition_engaged(-1UL); |
| if (!engaged) { |
| dev_info(xpc_part, "all partitions have disengaged\n"); |
| break; |
| } |
| |
| time = rtc_time(); |
| if (time >= disengage_request_timeout) { |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { |
| if (engaged & (1UL << partid)) { |
| dev_info(xpc_part, "disengage from " |
| "remote partition %d timed " |
| "out\n", partid); |
| } |
| } |
| break; |
| } |
| |
| if (time >= printmsg_time) { |
| dev_info(xpc_part, "waiting for remote partitions to " |
| "disengage, timeout in %ld seconds\n", |
| (disengage_request_timeout - time) / |
| sn_rtc_cycles_per_second); |
| printmsg_time = time + |
| (XPC_DISENGAGE_PRINTMSG_INTERVAL * |
| sn_rtc_cycles_per_second); |
| } |
| } |
| } |
| |
| |
| /* |
| * This function is called when the system is being restarted or halted due |
| * to some sort of system failure. If this is the case we need to notify the |
| * other partitions to disengage from all references to our memory. |
| * This function can also be called when our heartbeater could be offlined |
| * for a time. In this case we need to notify other partitions to not worry |
| * about the lack of a heartbeat. |
| */ |
| static int |
| xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) |
| { |
| switch (event) { |
| case DIE_MACHINE_RESTART: |
| case DIE_MACHINE_HALT: |
| xpc_die_disengage(); |
| break; |
| |
| case DIE_KDEBUG_ENTER: |
| /* Should lack of heartbeat be ignored by other partitions? */ |
| if (!xpc_kdebug_ignore) { |
| break; |
| } |
| /* fall through */ |
| case DIE_MCA_MONARCH_ENTER: |
| case DIE_INIT_MONARCH_ENTER: |
| xpc_vars->heartbeat++; |
| xpc_vars->heartbeat_offline = 1; |
| break; |
| |
| case DIE_KDEBUG_LEAVE: |
| /* Is lack of heartbeat being ignored by other partitions? */ |
| if (!xpc_kdebug_ignore) { |
| break; |
| } |
| /* fall through */ |
| case DIE_MCA_MONARCH_LEAVE: |
| case DIE_INIT_MONARCH_LEAVE: |
| xpc_vars->heartbeat++; |
| xpc_vars->heartbeat_offline = 0; |
| break; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| |
| int __init |
| xpc_init(void) |
| { |
| int ret; |
| partid_t partid; |
| struct xpc_partition *part; |
| pid_t pid; |
| |
| |
| if (!ia64_platform_is("sn2")) { |
| return -ENODEV; |
| } |
| |
| /* |
| * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng |
| * various portions of a partition's reserved page. Its size is based |
| * on the size of the reserved page header and part_nasids mask. So we |
| * need to ensure that the other items will fit as well. |
| */ |
| if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) { |
| dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n"); |
| return -EPERM; |
| } |
| DBUG_ON((u64) xpc_remote_copy_buffer != |
| L1_CACHE_ALIGN((u64) xpc_remote_copy_buffer)); |
| |
| snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); |
| snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); |
| |
| xpc_sysctl = register_sysctl_table(xpc_sys_dir, 1); |
| |
| /* |
| * The first few fields of each entry of xpc_partitions[] need to |
| * be initialized now so that calls to xpc_connect() and |
| * xpc_disconnect() can be made prior to the activation of any remote |
| * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE |
| * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING |
| * PARTITION HAS BEEN ACTIVATED. |
| */ |
| for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { |
| part = &xpc_partitions[partid]; |
| |
| DBUG_ON((u64) part != L1_CACHE_ALIGN((u64) part)); |
| |
| part->act_IRQ_rcvd = 0; |
| spin_lock_init(&part->act_lock); |
| part->act_state = XPC_P_INACTIVE; |
| XPC_SET_REASON(part, 0, 0); |
| |
| init_timer(&part->disengage_request_timer); |
| part->disengage_request_timer.function = |
| xpc_timeout_partition_disengage_request; |
| part->disengage_request_timer.data = (unsigned long) part; |
| |
| part->setup_state = XPC_P_UNSET; |
| init_waitqueue_head(&part->teardown_wq); |
| atomic_set(&part->references, 0); |
| } |
| |
| /* |
| * Open up protections for IPI operations (and AMO operations on |
| * Shub 1.1 systems). |
| */ |
| xpc_allow_IPI_ops(); |
| |
| /* |
| * Interrupts being processed will increment this atomic variable and |
| * awaken the heartbeat thread which will process the interrupts. |
| */ |
| atomic_set(&xpc_act_IRQ_rcvd, 0); |
| |
| /* |
| * This is safe to do before the xpc_hb_checker thread has started |
| * because the handler releases a wait queue. If an interrupt is |
| * received before the thread is waiting, it will not go to sleep, |
| * but rather immediately process the interrupt. |
| */ |
| ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0, |
| "xpc hb", NULL); |
| if (ret != 0) { |
| dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " |
| "errno=%d\n", -ret); |
| |
| xpc_restrict_IPI_ops(); |
| |
| if (xpc_sysctl) { |
| unregister_sysctl_table(xpc_sysctl); |
| } |
| return -EBUSY; |
| } |
| |
| /* |
| * Fill the partition reserved page with the information needed by |
| * other partitions to discover we are alive and establish initial |
| * communications. |
| */ |
| xpc_rsvd_page = xpc_rsvd_page_init(); |
| if (xpc_rsvd_page == NULL) { |
| dev_err(xpc_part, "could not setup our reserved page\n"); |
| |
| free_irq(SGI_XPC_ACTIVATE, NULL); |
| xpc_restrict_IPI_ops(); |
| |
| if (xpc_sysctl) { |
| unregister_sysctl_table(xpc_sysctl); |
| } |
| return -EBUSY; |
| } |
| |
| |
| /* add ourselves to the reboot_notifier_list */ |
| ret = register_reboot_notifier(&xpc_reboot_notifier); |
| if (ret != 0) { |
| dev_warn(xpc_part, "can't register reboot notifier\n"); |
| } |
| |
| /* add ourselves to the die_notifier list (i.e., ia64die_chain) */ |
| ret = register_die_notifier(&xpc_die_notifier); |
| if (ret != 0) { |
| dev_warn(xpc_part, "can't register die notifier\n"); |
| } |
| |
| |
| /* |
| * Set the beating to other partitions into motion. This is |
| * the last requirement for other partitions' discovery to |
| * initiate communications with us. |
| */ |
| init_timer(&xpc_hb_timer); |
| xpc_hb_timer.function = xpc_hb_beater; |
| xpc_hb_beater(0); |
| |
| |
| /* |
| * The real work-horse behind xpc. This processes incoming |
| * interrupts and monitors remote heartbeats. |
| */ |
| pid = kernel_thread(xpc_hb_checker, NULL, 0); |
| if (pid < 0) { |
| dev_err(xpc_part, "failed while forking hb check thread\n"); |
| |
| /* indicate to others that our reserved page is uninitialized */ |
| xpc_rsvd_page->vars_pa = 0; |
| |
| /* take ourselves off of the reboot_notifier_list */ |
| (void) unregister_reboot_notifier(&xpc_reboot_notifier); |
| |
| /* take ourselves off of the die_notifier list */ |
| (void) unregister_die_notifier(&xpc_die_notifier); |
| |
| del_timer_sync(&xpc_hb_timer); |
| free_irq(SGI_XPC_ACTIVATE, NULL); |
| xpc_restrict_IPI_ops(); |
| |
| if (xpc_sysctl) { |
| unregister_sysctl_table(xpc_sysctl); |
| } |
| return -EBUSY; |
| } |
| |
| |
| /* |
| * Startup a thread that will attempt to discover other partitions to |
| * activate based on info provided by SAL. This new thread is short |
| * lived and will exit once discovery is complete. |
| */ |
| pid = kernel_thread(xpc_initiate_discovery, NULL, 0); |
| if (pid < 0) { |
| dev_err(xpc_part, "failed while forking discovery thread\n"); |
| |
| /* mark this new thread as a non-starter */ |
| up(&xpc_discovery_exited); |
| |
| xpc_do_exit(xpcUnloading); |
| return -EBUSY; |
| } |
| |
| |
| /* set the interface to point at XPC's functions */ |
| xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect, |
| xpc_initiate_allocate, xpc_initiate_send, |
| xpc_initiate_send_notify, xpc_initiate_received, |
| xpc_initiate_partid_to_nasids); |
| |
| return 0; |
| } |
| module_init(xpc_init); |
| |
| |
| void __exit |
| xpc_exit(void) |
| { |
| xpc_do_exit(xpcUnloading); |
| } |
| module_exit(xpc_exit); |
| |
| |
| MODULE_AUTHOR("Silicon Graphics, Inc."); |
| MODULE_DESCRIPTION("Cross Partition Communication (XPC) support"); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(xpc_hb_interval, int, 0); |
| MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between " |
| "heartbeat increments."); |
| |
| module_param(xpc_hb_check_interval, int, 0); |
| MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between " |
| "heartbeat checks."); |
| |
| module_param(xpc_disengage_request_timelimit, int, 0); |
| MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait " |
| "for disengage request to complete."); |
| |
| module_param(xpc_kdebug_ignore, int, 0); |
| MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by " |
| "other partitions when dropping into kdebug."); |
| |