| /* |
| * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| /dts-v1/; |
| |
| #include "omap5.dtsi" |
| |
| / { |
| model = "TI OMAP5 uEVM board"; |
| compatible = "ti,omap5-uevm", "ti,omap5"; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x80000000 0x7F000000>; /* 2032 MB */ |
| }; |
| |
| vmmcsd_fixed: fixedregulator-mmcsd { |
| compatible = "regulator-fixed"; |
| regulator-name = "vmmcsd_fixed"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| |
| /* HS USB Port 2 RESET */ |
| hsusb2_reset: hsusb2_reset_reg { |
| compatible = "regulator-fixed"; |
| regulator-name = "hsusb2_reset"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */ |
| startup-delay-us = <70000>; |
| enable-active-high; |
| }; |
| |
| /* HS USB Host PHY on PORT 2 */ |
| hsusb2_phy: hsusb2_phy { |
| compatible = "usb-nop-xceiv"; |
| reset-supply = <&hsusb2_reset>; |
| }; |
| |
| /* HS USB Port 3 RESET */ |
| hsusb3_reset: hsusb3_reset_reg { |
| compatible = "regulator-fixed"; |
| regulator-name = "hsusb3_reset"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */ |
| startup-delay-us = <70000>; |
| enable-active-high; |
| }; |
| |
| /* HS USB Host PHY on PORT 3 */ |
| hsusb3_phy: hsusb3_phy { |
| compatible = "usb-nop-xceiv"; |
| reset-supply = <&hsusb3_reset>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led@1 { |
| label = "omap5:blue:usr1"; |
| gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ |
| linux,default-trigger = "heartbeat"; |
| default-state = "off"; |
| }; |
| }; |
| }; |
| |
| &omap5_pmx_core { |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &twl6040_pins |
| &mcpdm_pins |
| &dmic_pins |
| &mcbsp1_pins |
| &mcbsp2_pins |
| &usbhost_pins |
| &led_gpio_pins |
| >; |
| |
| twl6040_pins: pinmux_twl6040_pins { |
| pinctrl-single,pins = < |
| 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ |
| >; |
| }; |
| |
| mcpdm_pins: pinmux_mcpdm_pins { |
| pinctrl-single,pins = < |
| 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ |
| 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ |
| 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ |
| 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ |
| 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ |
| >; |
| }; |
| |
| dmic_pins: pinmux_dmic_pins { |
| pinctrl-single,pins = < |
| 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */ |
| 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */ |
| 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */ |
| 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */ |
| >; |
| }; |
| |
| mcbsp1_pins: pinmux_mcbsp1_pins { |
| pinctrl-single,pins = < |
| 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ |
| 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ |
| 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ |
| 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ |
| >; |
| }; |
| |
| mcbsp2_pins: pinmux_mcbsp2_pins { |
| pinctrl-single,pins = < |
| 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ |
| 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ |
| 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ |
| 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ |
| >; |
| }; |
| |
| i2c1_pins: pinmux_i2c1_pins { |
| pinctrl-single,pins = < |
| 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
| 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ |
| >; |
| }; |
| |
| i2c5_pins: pinmux_i2c5_pins { |
| pinctrl-single,pins = < |
| 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ |
| 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ |
| >; |
| }; |
| |
| mcspi2_pins: pinmux_mcspi2_pins { |
| pinctrl-single,pins = < |
| 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ |
| 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ |
| 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ |
| 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */ |
| >; |
| }; |
| |
| mcspi3_pins: pinmux_mcspi3_pins { |
| pinctrl-single,pins = < |
| 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ |
| 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ |
| 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ |
| 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ |
| >; |
| }; |
| |
| mcspi4_pins: pinmux_mcspi4_pins { |
| pinctrl-single,pins = < |
| 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ |
| 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ |
| 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ |
| 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ |
| >; |
| }; |
| |
| usbhost_pins: pinmux_usbhost_pins { |
| pinctrl-single,pins = < |
| 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ |
| 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ |
| |
| 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ |
| 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ |
| |
| 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ |
| 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ |
| >; |
| }; |
| |
| led_gpio_pins: pinmux_led_gpio_pins { |
| pinctrl-single,pins = < |
| 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ |
| >; |
| }; |
| }; |
| |
| &omap5_pmx_wkup { |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &usbhost_wkup_pins |
| >; |
| |
| usbhost_wkup_pins: pinmux_usbhost_wkup_pins { |
| pinctrl-single,pins = < |
| 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ |
| >; |
| }; |
| }; |
| |
| &mmc1 { |
| vmmc-supply = <&vmmcsd_fixed>; |
| bus-width = <4>; |
| }; |
| |
| &mmc2 { |
| vmmc-supply = <&vmmcsd_fixed>; |
| bus-width = <8>; |
| ti,non-removable; |
| }; |
| |
| &mmc3 { |
| bus-width = <4>; |
| ti,non-removable; |
| }; |
| |
| &mmc4 { |
| status = "disabled"; |
| }; |
| |
| &mmc5 { |
| status = "disabled"; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| |
| clock-frequency = <400000>; |
| }; |
| |
| &i2c5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_pins>; |
| |
| clock-frequency = <400000>; |
| }; |
| |
| &mcbsp3 { |
| status = "disabled"; |
| }; |
| |
| &usbhshost { |
| port2-mode = "ehci-hsic"; |
| port3-mode = "ehci-hsic"; |
| }; |
| |
| &usbhsehci { |
| phys = <0 &hsusb2_phy &hsusb3_phy>; |
| }; |
| |
| &mcspi1 { |
| |
| }; |
| |
| &mcspi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcspi2_pins>; |
| }; |
| |
| &mcspi3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcspi3_pins>; |
| }; |
| |
| &mcspi4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcspi4_pins>; |
| }; |