| /* |
| * Driver for the Gemini pin controller |
| * |
| * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> |
| * |
| * This is a group-only pin controller. |
| */ |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/of.h> |
| #include <linux/pinctrl/machine.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinmux.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| |
| #include "pinctrl-utils.h" |
| |
| #define DRIVER_NAME "pinctrl-gemini" |
| |
| /** |
| * struct gemini_pin_conf - information about configuring a pin |
| * @pin: the pin number |
| * @reg: config register |
| * @mask: the bits affecting the configuration of the pin |
| */ |
| struct gemini_pin_conf { |
| unsigned int pin; |
| u32 reg; |
| u32 mask; |
| }; |
| |
| /** |
| * struct gemini_pmx - state holder for the gemini pin controller |
| * @dev: a pointer back to containing device |
| * @virtbase: the offset to the controller in virtual memory |
| * @map: regmap to access registers |
| * @is_3512: whether the SoC/package is the 3512 variant |
| * @is_3516: whether the SoC/package is the 3516 variant |
| * @flash_pin: whether the flash pin (extended pins for parallel |
| * flash) is set |
| * @confs: pin config information |
| * @nconfs: number of pin config information items |
| */ |
| struct gemini_pmx { |
| struct device *dev; |
| struct pinctrl_dev *pctl; |
| struct regmap *map; |
| bool is_3512; |
| bool is_3516; |
| bool flash_pin; |
| const struct gemini_pin_conf *confs; |
| unsigned int nconfs; |
| }; |
| |
| /** |
| * struct gemini_pin_group - describes a Gemini pin group |
| * @name: the name of this specific pin group |
| * @pins: an array of discrete physical pins used in this group, taken |
| * from the driver-local pin enumeration space |
| * @num_pins: the number of pins in this group array, i.e. the number of |
| * elements in .pins so we can iterate over that array |
| * @mask: bits to clear to enable this when doing pin muxing |
| * @value: bits to set to enable this when doing pin muxing |
| */ |
| struct gemini_pin_group { |
| const char *name; |
| const unsigned int *pins; |
| const unsigned int num_pins; |
| u32 mask; |
| u32 value; |
| }; |
| |
| /* Some straight-forward control registers */ |
| #define GLOBAL_WORD_ID 0x00 |
| #define GLOBAL_STATUS 0x04 |
| #define GLOBAL_STATUS_FLPIN BIT(20) |
| #define GLOBAL_GMAC_CTRL_SKEW 0x1c |
| #define GLOBAL_GMAC0_DATA_SKEW 0x20 |
| #define GLOBAL_GMAC1_DATA_SKEW 0x24 |
| /* |
| * Global Miscellaneous Control Register |
| * This register controls all Gemini pad/pin multiplexing |
| * |
| * It is a tricky register though: |
| * - For the bits named *_ENABLE, once you DISABLE something, it simply cannot |
| * be brought back online, so it means permanent disablement of the |
| * corresponding pads. |
| * - For the bits named *_DISABLE, once you enable something, it cannot be |
| * DISABLED again. So you select a flash configuration once, and then |
| * you are stuck with it. |
| */ |
| #define GLOBAL_MISC_CTRL 0x30 |
| #define GEMINI_GMAC_IOSEL_MASK GENMASK(28, 27) |
| /* Not really used */ |
| #define GEMINI_GMAC_IOSEL_GMAC0_GMII BIT(28) |
| /* Activated with GMAC1 */ |
| #define GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII BIT(27) |
| /* This will be the default */ |
| #define GEMINI_GMAC_IOSEL_GMAC0_RGMII_GMAC1_GPIO2 0 |
| #define TVC_CLK_PAD_ENABLE BIT(20) |
| #define PCI_CLK_PAD_ENABLE BIT(17) |
| #define LPC_CLK_PAD_ENABLE BIT(16) |
| #define TVC_PADS_ENABLE BIT(9) |
| #define SSP_PADS_ENABLE BIT(8) |
| #define LCD_PADS_ENABLE BIT(7) |
| #define LPC_PADS_ENABLE BIT(6) |
| #define PCI_PADS_ENABLE BIT(5) |
| #define IDE_PADS_ENABLE BIT(4) |
| #define DRAM_PADS_POWERDOWN BIT(3) |
| #define NAND_PADS_DISABLE BIT(2) |
| #define PFLASH_PADS_DISABLE BIT(1) |
| #define SFLASH_PADS_DISABLE BIT(0) |
| #define PADS_MASK (GENMASK(9, 0) | BIT(16) | BIT(17) | BIT(20) | BIT(27)) |
| #define PADS_MAXBIT 27 |
| |
| /* Ordered by bit index */ |
| static const char * const gemini_padgroups[] = { |
| "serial flash", |
| "parallel flash", |
| "NAND flash", |
| "DRAM", |
| "IDE", |
| "PCI", |
| "LPC", |
| "LCD", |
| "SSP", |
| "TVC", |
| NULL, NULL, NULL, NULL, NULL, NULL, |
| "LPC CLK", |
| "PCI CLK", |
| NULL, NULL, |
| "TVC CLK", |
| NULL, NULL, NULL, NULL, NULL, |
| "GMAC1", |
| }; |
| |
| static const struct pinctrl_pin_desc gemini_3512_pins[] = { |
| /* Row A */ |
| PINCTRL_PIN(0, "A1 VREF CTRL"), |
| PINCTRL_PIN(1, "A2 VCC2IO CTRL"), |
| PINCTRL_PIN(2, "A3 DRAM CK"), |
| PINCTRL_PIN(3, "A4 DRAM CK N"), |
| PINCTRL_PIN(4, "A5 DRAM A5"), |
| PINCTRL_PIN(5, "A6 DRAM CKE"), |
| PINCTRL_PIN(6, "A7 DRAM DQ11"), |
| PINCTRL_PIN(7, "A8 DRAM DQ0"), |
| PINCTRL_PIN(8, "A9 DRAM DQ5"), |
| PINCTRL_PIN(9, "A10 DRAM DQ6"), |
| PINCTRL_PIN(10, "A11 DRAM DRAM VREF"), |
| PINCTRL_PIN(11, "A12 DRAM BA1"), |
| PINCTRL_PIN(12, "A13 DRAM A2"), |
| PINCTRL_PIN(13, "A14 PCI GNT1 N"), |
| PINCTRL_PIN(14, "A15 PCI REQ9 N"), |
| PINCTRL_PIN(15, "A16 PCI REQ2 N"), |
| PINCTRL_PIN(16, "A17 PCI REQ3 N"), |
| PINCTRL_PIN(17, "A18 PCI AD31"), |
| /* Row B */ |
| PINCTRL_PIN(18, "B1 VCCK CTRL"), |
| PINCTRL_PIN(19, "B2 PWR EN"), |
| PINCTRL_PIN(20, "B3 RTC CLKI"), |
| PINCTRL_PIN(21, "B4 DRAM A4"), |
| PINCTRL_PIN(22, "B5 DRAM A6"), |
| PINCTRL_PIN(23, "B6 DRAM A12"), |
| PINCTRL_PIN(24, "B7 DRAM DQS1"), |
| PINCTRL_PIN(25, "B8 DRAM DQ15"), |
| PINCTRL_PIN(26, "B9 DRAM DQ4"), |
| PINCTRL_PIN(27, "B10 DRAM DQS0"), |
| PINCTRL_PIN(28, "B11 DRAM WE N"), |
| PINCTRL_PIN(29, "B12 DRAM A10"), |
| PINCTRL_PIN(30, "B13 DRAM A3"), |
| PINCTRL_PIN(31, "B14 PCI GNT0 N"), |
| PINCTRL_PIN(32, "B15 PCI GNT3 N"), |
| PINCTRL_PIN(33, "B16 PCI REQ1 N"), |
| PINCTRL_PIN(34, "B17 PCI AD30"), |
| PINCTRL_PIN(35, "B18 PCI AD29"), |
| /* Row C */ |
| PINCTRL_PIN(36, "C1 CIR RST N"), /* REALLY? CIR is not in 3512... */ |
| PINCTRL_PIN(37, "C2 XTALI"), |
| PINCTRL_PIN(38, "C3 PWR BTN"), |
| PINCTRL_PIN(39, "C4 RTC CLKO"), |
| PINCTRL_PIN(40, "C5 DRAM A7"), |
| PINCTRL_PIN(41, "C6 DRAM A11"), |
| PINCTRL_PIN(42, "C7 DRAM DQ10"), |
| PINCTRL_PIN(43, "C8 DRAM DQ14"), |
| PINCTRL_PIN(44, "C9 DRAM DQ3"), |
| PINCTRL_PIN(45, "C10 DRAM DQ7"), |
| PINCTRL_PIN(46, "C11 DRAM CAS N"), |
| PINCTRL_PIN(47, "C12 DRAM A0"), |
| PINCTRL_PIN(48, "C13 PCI INT0 N"), |
| PINCTRL_PIN(49, "C14 EXT RESET N"), |
| PINCTRL_PIN(50, "C15 PCI GNT2 N"), |
| PINCTRL_PIN(51, "C16 PCI AD28"), |
| PINCTRL_PIN(52, "C17 PCI AD27"), |
| PINCTRL_PIN(53, "C18 PCI AD26"), |
| /* Row D */ |
| PINCTRL_PIN(54, "D1 AVCCKHA"), |
| PINCTRL_PIN(55, "D2 AGNDIOHA"), |
| PINCTRL_PIN(56, "D3 XTALO"), |
| PINCTRL_PIN(57, "D4 AVCC3IOHA"), |
| PINCTRL_PIN(58, "D5 DRAM A8"), |
| PINCTRL_PIN(59, "D6 DRAM A9"), |
| PINCTRL_PIN(60, "D7 DRAM DQ9"), |
| PINCTRL_PIN(61, "D8 DRAM DQ13"), |
| PINCTRL_PIN(62, "D9 DRAM DQ2"), |
| PINCTRL_PIN(63, "D10 DRAM A13"), |
| PINCTRL_PIN(64, "D11 DRAM RAS N"), |
| PINCTRL_PIN(65, "D12 DRAM A1"), |
| PINCTRL_PIN(66, "D13 PCI INTC N"), |
| PINCTRL_PIN(67, "D14 PCI CLK"), |
| PINCTRL_PIN(68, "D15 PCI AD25"), |
| PINCTRL_PIN(69, "D16 PCI AD24"), |
| PINCTRL_PIN(70, "D17 PCI CBE3 N"), |
| PINCTRL_PIN(71, "D18 PCI AD23"), |
| /* Row E */ |
| PINCTRL_PIN(72, "E1 AVCC3IOHA"), |
| PINCTRL_PIN(73, "E2 EBG"), |
| PINCTRL_PIN(74, "E3 AVCC3IOHB"), |
| PINCTRL_PIN(75, "E4 REXT"), |
| PINCTRL_PIN(76, "E5 GND"), |
| PINCTRL_PIN(77, "E6 DRAM DQM1"), |
| PINCTRL_PIN(78, "E7 DRAM DQ8"), |
| PINCTRL_PIN(79, "E8 DRAM DQ12"), |
| PINCTRL_PIN(80, "E9 DRAM DQ1"), |
| PINCTRL_PIN(81, "E10 DRAM DQM0"), |
| PINCTRL_PIN(82, "E11 DRAM BA0"), |
| PINCTRL_PIN(83, "E12 PCI INTA N"), |
| PINCTRL_PIN(84, "E13 PCI INTB N"), |
| PINCTRL_PIN(85, "E14 GND"), |
| PINCTRL_PIN(86, "E15 PCI AD22"), |
| PINCTRL_PIN(87, "E16 PCI AD21"), |
| PINCTRL_PIN(88, "E17 PCI AD20"), |
| PINCTRL_PIN(89, "E18 PCI AD19"), |
| /* Row F */ |
| PINCTRL_PIN(90, "F1 SATA0 RXDP"), |
| PINCTRL_PIN(91, "F2 SATA0 RXDN"), |
| PINCTRL_PIN(92, "F3 AGNDK 0"), |
| PINCTRL_PIN(93, "F4 AVCC3 S"), |
| PINCTRL_PIN(94, "F5 AVCCK P"), |
| PINCTRL_PIN(95, "F6 GND"), |
| PINCTRL_PIN(96, "F7 VCC2IOHA 2"), |
| PINCTRL_PIN(97, "F8 VCC2IOHA 2"), |
| PINCTRL_PIN(98, "F9 V1"), |
| PINCTRL_PIN(99, "F10 V1"), |
| PINCTRL_PIN(100, "F11 VCC2IOHA 2"), |
| PINCTRL_PIN(101, "F12 VCC2IOHA 2"), |
| PINCTRL_PIN(102, "F13 GND"), |
| PINCTRL_PIN(103, "F14 PCI AD18"), |
| PINCTRL_PIN(104, "F15 PCI AD17"), |
| PINCTRL_PIN(105, "F16 PCI AD16"), |
| PINCTRL_PIN(106, "F17 PCI CBE2 N"), |
| PINCTRL_PIN(107, "F18 PCI FRAME N"), |
| /* Row G */ |
| PINCTRL_PIN(108, "G1 SATA0 TXDP"), |
| PINCTRL_PIN(109, "G2 SATA0 TXDN"), |
| PINCTRL_PIN(110, "G3 AGNDK 1"), |
| PINCTRL_PIN(111, "G4 AVCCK 0"), |
| PINCTRL_PIN(112, "G5 TEST CLKOUT"), |
| PINCTRL_PIN(113, "G6 AGND"), |
| PINCTRL_PIN(114, "G7 GND"), |
| PINCTRL_PIN(115, "G8 VCC2IOHA 2"), |
| PINCTRL_PIN(116, "G9 V1"), |
| PINCTRL_PIN(117, "G10 V1"), |
| PINCTRL_PIN(118, "G11 VCC2IOHA 2"), |
| PINCTRL_PIN(119, "G12 GND"), |
| PINCTRL_PIN(120, "G13 VCC3IOHA"), |
| PINCTRL_PIN(121, "G14 PCI IRDY N"), |
| PINCTRL_PIN(122, "G15 PCI TRDY N"), |
| PINCTRL_PIN(123, "G16 PCI DEVSEL N"), |
| PINCTRL_PIN(124, "G17 PCI STOP N"), |
| PINCTRL_PIN(125, "G18 PCI PAR"), |
| /* Row H */ |
| PINCTRL_PIN(126, "H1 SATA1 TXDP"), |
| PINCTRL_PIN(127, "H2 SATA1 TXDN"), |
| PINCTRL_PIN(128, "H3 AGNDK 2"), |
| PINCTRL_PIN(129, "H4 AVCCK 1"), |
| PINCTRL_PIN(130, "H5 AVCCK S"), |
| PINCTRL_PIN(131, "H6 AVCCKHB"), |
| PINCTRL_PIN(132, "H7 AGND"), |
| PINCTRL_PIN(133, "H8 GND"), |
| PINCTRL_PIN(134, "H9 GND"), |
| PINCTRL_PIN(135, "H10 GND"), |
| PINCTRL_PIN(136, "H11 GND"), |
| PINCTRL_PIN(137, "H12 VCC3IOHA"), |
| PINCTRL_PIN(138, "H13 VCC3IOHA"), |
| PINCTRL_PIN(139, "H14 PCI CBE1 N"), |
| PINCTRL_PIN(140, "H15 PCI AD15"), |
| PINCTRL_PIN(141, "H16 PCI AD14"), |
| PINCTRL_PIN(142, "H17 PCI AD13"), |
| PINCTRL_PIN(143, "H18 PCI AD12"), |
| /* Row J (for some reason I is skipped) */ |
| PINCTRL_PIN(144, "J1 SATA1 RXDP"), |
| PINCTRL_PIN(145, "J2 SATA1 RXDN"), |
| PINCTRL_PIN(146, "J3 AGNDK 3"), |
| PINCTRL_PIN(147, "J4 AVCCK 2"), |
| PINCTRL_PIN(148, "J5 IDE DA1"), |
| PINCTRL_PIN(149, "J6 V1"), |
| PINCTRL_PIN(150, "J7 V1"), |
| PINCTRL_PIN(151, "J8 GND"), |
| PINCTRL_PIN(152, "J9 GND"), |
| PINCTRL_PIN(153, "J10 GND"), |
| PINCTRL_PIN(154, "J11 GND"), |
| PINCTRL_PIN(155, "J12 V1"), |
| PINCTRL_PIN(156, "J13 V1"), |
| PINCTRL_PIN(157, "J14 PCI AD11"), |
| PINCTRL_PIN(158, "J15 PCI AD10"), |
| PINCTRL_PIN(159, "J16 PCI AD9"), |
| PINCTRL_PIN(160, "J17 PCI AD8"), |
| PINCTRL_PIN(161, "J18 PCI CBE0 N"), |
| /* Row K */ |
| PINCTRL_PIN(162, "K1 IDE CS1 N"), |
| PINCTRL_PIN(163, "K2 IDE CS0 N"), |
| PINCTRL_PIN(164, "K3 AVCCK 3"), |
| PINCTRL_PIN(165, "K4 IDE DA2"), |
| PINCTRL_PIN(166, "K5 IDE DA0"), |
| PINCTRL_PIN(167, "K6 V1"), |
| PINCTRL_PIN(168, "K7 V1"), |
| PINCTRL_PIN(169, "K8 GND"), |
| PINCTRL_PIN(170, "K9 GND"), |
| PINCTRL_PIN(171, "K10 GND"), |
| PINCTRL_PIN(172, "K11 GND"), |
| PINCTRL_PIN(173, "K12 V1"), |
| PINCTRL_PIN(174, "K13 V1"), |
| PINCTRL_PIN(175, "K14 PCI AD3"), |
| PINCTRL_PIN(176, "K15 PCI AD4"), |
| PINCTRL_PIN(177, "K16 PCI AD5"), |
| PINCTRL_PIN(178, "K17 PCI AD6"), |
| PINCTRL_PIN(179, "K18 PCI AD7"), |
| /* Row L */ |
| PINCTRL_PIN(180, "L1 IDE INTRQ"), |
| PINCTRL_PIN(181, "L2 IDE DMACK N"), |
| PINCTRL_PIN(182, "L3 IDE IORDY"), |
| PINCTRL_PIN(183, "L4 IDE DIOR N"), |
| PINCTRL_PIN(184, "L5 IDE DIOW N"), |
| PINCTRL_PIN(185, "L6 VCC3IOHA"), |
| PINCTRL_PIN(186, "L7 VCC3IOHA"), |
| PINCTRL_PIN(187, "L8 GND"), |
| PINCTRL_PIN(188, "L9 GND"), |
| PINCTRL_PIN(189, "L10 GND"), |
| PINCTRL_PIN(190, "L11 GND"), |
| PINCTRL_PIN(191, "L12 VCC3IOHA"), |
| PINCTRL_PIN(192, "L13 VCC3IOHA"), |
| PINCTRL_PIN(193, "L14 GPIO0 30"), |
| PINCTRL_PIN(194, "L15 GPIO0 31"), |
| PINCTRL_PIN(195, "L16 PCI AD0"), |
| PINCTRL_PIN(196, "L17 PCI AD1"), |
| PINCTRL_PIN(197, "L18 PCI AD2"), |
| /* Row M */ |
| PINCTRL_PIN(198, "M1 IDE DMARQ"), |
| PINCTRL_PIN(199, "M2 IDE DD15"), |
| PINCTRL_PIN(200, "M3 IDE DD0"), |
| PINCTRL_PIN(201, "M4 IDE DD14"), |
| PINCTRL_PIN(202, "M5 IDE DD1"), |
| PINCTRL_PIN(203, "M6 VCC3IOHA"), |
| PINCTRL_PIN(204, "M7 GND"), |
| PINCTRL_PIN(205, "M8 VCC2IOHA 1"), |
| PINCTRL_PIN(206, "M9 V1"), |
| PINCTRL_PIN(207, "M10 V1"), |
| PINCTRL_PIN(208, "M11 VCC3IOHA"), |
| PINCTRL_PIN(209, "M12 GND"), |
| PINCTRL_PIN(210, "M13 VCC3IOHA"), |
| PINCTRL_PIN(211, "M14 GPIO0 25"), |
| PINCTRL_PIN(212, "M15 GPIO0 26"), |
| PINCTRL_PIN(213, "M16 GPIO0 27"), |
| PINCTRL_PIN(214, "M17 GPIO0 28"), |
| PINCTRL_PIN(215, "M18 GPIO0 29"), |
| /* Row N */ |
| PINCTRL_PIN(216, "N1 IDE DD13"), |
| PINCTRL_PIN(217, "N2 IDE DD2"), |
| PINCTRL_PIN(218, "N3 IDE DD12"), |
| PINCTRL_PIN(219, "N4 IDE DD3"), |
| PINCTRL_PIN(220, "N5 IDE DD11"), |
| PINCTRL_PIN(221, "N6 GND"), |
| PINCTRL_PIN(222, "N7 VCC2IOHA 1"), |
| PINCTRL_PIN(223, "N8 VCC2IOHA 1"), |
| PINCTRL_PIN(224, "N9 V1"), |
| PINCTRL_PIN(225, "N10 V1"), |
| PINCTRL_PIN(226, "N11 VCC3IOHA"), |
| PINCTRL_PIN(227, "N12 VCC3IOHA"), |
| PINCTRL_PIN(228, "N13 GND"), |
| PINCTRL_PIN(229, "N14 GPIO0 20"), |
| PINCTRL_PIN(230, "N15 GPIO0 21"), |
| PINCTRL_PIN(231, "N16 GPIO0 22"), |
| PINCTRL_PIN(232, "N17 GPIO0 23"), |
| PINCTRL_PIN(233, "N18 GPIO0 24"), |
| /* Row P (for some reason O is skipped) */ |
| PINCTRL_PIN(234, "P1 IDE DD4"), |
| PINCTRL_PIN(235, "P2 IDE DD10"), |
| PINCTRL_PIN(236, "P3 IDE DD5"), |
| PINCTRL_PIN(237, "P4 IDE DD9"), |
| PINCTRL_PIN(238, "P5 GND"), |
| PINCTRL_PIN(239, "P6 USB XSCO"), |
| PINCTRL_PIN(240, "P7 GMAC0 TXD3"), |
| PINCTRL_PIN(241, "P8 GMAC0 TXEN"), |
| PINCTRL_PIN(242, "P9 GMAC0 RXD2"), |
| PINCTRL_PIN(243, "P10 GMAC1 TXC"), |
| PINCTRL_PIN(244, "P11 GMAC1 RXD1"), |
| PINCTRL_PIN(245, "P12 MODE SEL 1"), |
| PINCTRL_PIN(246, "P13 GPIO1 28"), |
| PINCTRL_PIN(247, "P14 GND"), |
| PINCTRL_PIN(248, "P15 GPIO0 5"), |
| PINCTRL_PIN(249, "P16 GPIO0 17"), |
| PINCTRL_PIN(250, "P17 GPIO0 18"), |
| PINCTRL_PIN(251, "P18 GPIO0 19"), |
| /* Row R (for some reason Q us skipped) */ |
| PINCTRL_PIN(252, "R1 IDE DD6"), |
| PINCTRL_PIN(253, "R2 IDE DD8"), |
| PINCTRL_PIN(254, "R3 IDE DD7"), |
| PINCTRL_PIN(255, "R4 IDE RESET N"), |
| PINCTRL_PIN(256, "R5 ICE0 DBGACK"), |
| PINCTRL_PIN(257, "R6 USB XSCI"), |
| PINCTRL_PIN(258, "R7 GMAC0 TXD2"), |
| PINCTRL_PIN(259, "R8 GMAC0 RXDV"), |
| PINCTRL_PIN(260, "R9 GMAC0 RXD3"), |
| PINCTRL_PIN(261, "R10 GMAC1 TXD0"), |
| PINCTRL_PIN(262, "R11 GMAC1 RXD0"), |
| PINCTRL_PIN(263, "R12 MODE SEL 0"), |
| PINCTRL_PIN(264, "R13 MODE SEL 3"), |
| PINCTRL_PIN(265, "R14 GPIO0 0"), |
| PINCTRL_PIN(266, "R15 GPIO0 4"), |
| PINCTRL_PIN(267, "R16 GPIO0 9"), |
| PINCTRL_PIN(268, "R17 GPIO0 15"), |
| PINCTRL_PIN(269, "R18 GPIO0 16"), |
| /* Row T (for some reason S is skipped) */ |
| PINCTRL_PIN(270, "T1 ICE0 DBGRQ"), |
| PINCTRL_PIN(271, "T2 ICE0 IDO"), |
| PINCTRL_PIN(272, "T3 ICE0 ICK"), |
| PINCTRL_PIN(273, "T4 ICE0 IMS"), |
| PINCTRL_PIN(274, "T5 ICE0 IDI"), |
| PINCTRL_PIN(275, "T6 USB RREF"), |
| PINCTRL_PIN(276, "T7 GMAC0 TXD1"), |
| PINCTRL_PIN(277, "T8 GMAC0 RXC"), |
| PINCTRL_PIN(278, "T9 GMAC0 CRS"), |
| PINCTRL_PIN(279, "T10 GMAC1 TXD1"), |
| PINCTRL_PIN(280, "T11 GMAC1 RXC"), |
| PINCTRL_PIN(281, "T12 GMAC1 CRS"), |
| PINCTRL_PIN(282, "T13 EXT CLK"), |
| PINCTRL_PIN(283, "T14 GPIO1 31"), |
| PINCTRL_PIN(284, "T15 GPIO0 3"), |
| PINCTRL_PIN(285, "T16 GPIO0 8"), |
| PINCTRL_PIN(286, "T17 GPIO0 12"), |
| PINCTRL_PIN(287, "T18 GPIO0 14"), |
| /* Row U */ |
| PINCTRL_PIN(288, "U1 ICE0 IRST N"), |
| PINCTRL_PIN(289, "U2 USB0 VCCHSRT"), |
| PINCTRL_PIN(290, "U3 USB0 DP"), |
| PINCTRL_PIN(291, "U4 USB VCCA U20"), |
| PINCTRL_PIN(292, "U5 USB1 DP"), |
| PINCTRL_PIN(293, "U6 USB1 GNDHSRT 1"), |
| PINCTRL_PIN(294, "U7 GMAC0 TXD0"), |
| PINCTRL_PIN(295, "U8 GMAC0 RXD0"), |
| PINCTRL_PIN(296, "U9 GMAC1 COL"), |
| PINCTRL_PIN(297, "U10 GMAC1 TXD2"), |
| PINCTRL_PIN(298, "U11 GMAC1 RXDV"), |
| PINCTRL_PIN(299, "U12 GMAC1 RXD3"), |
| PINCTRL_PIN(300, "U13 MODE SEL 2"), |
| PINCTRL_PIN(301, "U14 GPIO1 30"), |
| PINCTRL_PIN(302, "U15 GPIO0 2"), |
| PINCTRL_PIN(303, "U16 GPIO0 7"), |
| PINCTRL_PIN(304, "U17 GPIO0 11"), |
| PINCTRL_PIN(305, "U18 GPIO0 13"), |
| /* Row V */ |
| PINCTRL_PIN(306, "V1 USB0 GNDHSRT"), |
| PINCTRL_PIN(307, "V2 USB0 DM"), |
| PINCTRL_PIN(308, "V3 USB GNDA U20"), |
| PINCTRL_PIN(309, "V4 USB1 DM"), |
| PINCTRL_PIN(310, "V5 USB1 VCCHSRT1"), |
| PINCTRL_PIN(311, "V6 GMAC0 COL"), |
| PINCTRL_PIN(312, "V7 GMAC0 TXC"), |
| PINCTRL_PIN(313, "V8 GMAC0 RXD1"), |
| PINCTRL_PIN(314, "V9 REF CLK"), |
| PINCTRL_PIN(315, "V10 GMAC1 TXD3"), |
| PINCTRL_PIN(316, "V11 GMAC1 TXEN"), |
| PINCTRL_PIN(317, "V12 GMAC1 RXD2"), |
| PINCTRL_PIN(318, "V13 M30 CLK"), |
| PINCTRL_PIN(319, "V14 GPIO1 29"), |
| PINCTRL_PIN(320, "V15 GPIO0 1"), |
| PINCTRL_PIN(321, "V16 GPIO0 6"), |
| PINCTRL_PIN(322, "V17 GPIO0 10"), |
| PINCTRL_PIN(323, "V18 SYS RESET N"), |
| }; |
| |
| |
| /* Digital ground */ |
| static const unsigned int gnd_3512_pins[] = { |
| 76, 85, 95, 102, 114, 119, 133, 134, 135, 136, 151, 152, 153, 154, 169, |
| 170, 171, 172, 187, 188, 189, 190, 204, 209, 221, 228, 238, 247 |
| }; |
| |
| static const unsigned int dram_3512_pins[] = { |
| 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 21, 22, 23, 24, 25, 26, 27, 28, 29, |
| 30, 40, 41, 42, 43, 44, 45, 46, 47, 58, 59, 60, 61, 62, 63, 64, 65, 77, |
| 78, 79, 80, 81, 82 |
| }; |
| |
| static const unsigned int rtc_3512_pins[] = { 57, 20, 39 }; |
| |
| static const unsigned int power_3512_pins[] = { 19, 38, 36, 55, 37, 56, 54, 72 }; |
| |
| static const unsigned int system_3512_pins[] = { |
| 318, 264, 300, 245, 263, 282, 314, 323, 49, |
| }; |
| |
| static const unsigned int vcontrol_3512_pins[] = { 18, 0, 1 }; |
| |
| static const unsigned int ice_3512_pins[] = { 256, 270, 271, 272, 273, 274, 288 }; |
| |
| static const unsigned int ide_3512_pins[] = { |
| 162, 163, 165, 166, 148, 180, 181, 182, 183, 184, 198, 199, 200, 201, 202, |
| 216, 217, 218, 219, 220, 234, 235, 236, 237, 252, 253, 254, 255 |
| }; |
| |
| static const unsigned int sata_3512_pins[] = { |
| 75, 74, 73, 93, 94, 131, 112, 130, 92, 91, 90, 111, 110, 109, 108, 129, |
| 128, 127, 126, 147, 146, 145, 144, 164 |
| }; |
| |
| static const unsigned int usb_3512_pins[] = { |
| 306, 289, 307, 290, 239, 257, 275, 308, 291, 309, 292, 310, 293 |
| }; |
| |
| /* GMII, ethernet pins */ |
| static const unsigned int gmii_gmac0_3512_pins[] = { |
| 240, 241, 242, 258, 259, 260, 276, 277, 278, 294, 295, 311, 312, 313 |
| }; |
| |
| static const unsigned int gmii_gmac1_3512_pins[] = { |
| 243, 244, 261, 262, 279, 280, 281, 296, 297, 298, 299, 315, 316, 317 |
| }; |
| |
| static const unsigned int pci_3512_pins[] = { |
| 13, 14, 15, 16, 17, 31, 32, 33, 34, 35, 48, 50, 51, 52, 53, 66, 67, 68, 69, |
| 70, 71, 83, 84, 86, 87, 88, 89, 103, 104, 105, 106, 107, 121, 122, 123, |
| 124, 125, 139, 140, 141, 142, 143, 157, 158, 159, 160, 161, 175, 176, 177, |
| 178, 179, 195, 196, 197 |
| }; |
| |
| /* |
| * Apparently the LPC interface is using the PCICLK for the clocking so |
| * PCI needs to be active at the same time. |
| */ |
| static const unsigned int lpc_3512_pins[] = { |
| 285, /* LPC_LAD[0] */ |
| 304, /* LPC_SERIRQ */ |
| 286, /* LPC_LAD[2] */ |
| 305, /* LPC_LFRAME# */ |
| 287, /* LPC_LAD[3] */ |
| 268, /* LPC_LAD[1] */ |
| }; |
| |
| /* Character LCD */ |
| static const unsigned int lcd_3512_pins[] = { |
| 262, 244, 317, 299, 246, 319, 301, 283, 269, 233, 211 |
| }; |
| |
| static const unsigned int ssp_3512_pins[] = { |
| 285, /* SSP_97RST# SSP AC97 Reset, active low */ |
| 304, /* SSP_FSC */ |
| 286, /* SSP_ECLK */ |
| 305, /* SSP_TXD */ |
| 287, /* SSP_RXD */ |
| 268, /* SSP_SCLK */ |
| }; |
| |
| static const unsigned int uart_rxtx_3512_pins[] = { |
| 267, /* UART_SIN serial input, RX */ |
| 322, /* UART_SOUT serial output, TX */ |
| }; |
| |
| static const unsigned int uart_modem_3512_pins[] = { |
| 285, /* UART_NDCD DCD carrier detect */ |
| 304, /* UART_NDTR DTR data terminal ready */ |
| 286, /* UART_NDSR DSR data set ready */ |
| 305, /* UART_NRTS RTS request to send */ |
| 287, /* UART_NCTS CTS clear to send */ |
| 268, /* UART_NRI RI ring indicator */ |
| }; |
| |
| static const unsigned int tvc_3512_pins[] = { |
| 246, /* TVC_DATA[0] */ |
| 319, /* TVC_DATA[1] */ |
| 301, /* TVC_DATA[2] */ |
| 283, /* TVC_DATA[3] */ |
| 265, /* TVC_CLK */ |
| 320, /* TVC_DATA[4] */ |
| 302, /* TVC_DATA[5] */ |
| 284, /* TVC_DATA[6] */ |
| 266, /* TVC_DATA[7] */ |
| }; |
| |
| /* NAND flash pins */ |
| static const unsigned int nflash_3512_pins[] = { |
| 199, 200, 201, 202, 216, 217, 218, 219, 220, 234, 235, 236, 237, 252, |
| 253, 254, 249, 250, 232, 233, 211, 193, 194 |
| }; |
| |
| /* Parallel (NOR) flash pins, D[0-15], A[16-25], CE0, CE1, RB, WE, OE, ALE */ |
| static const unsigned int pflash_3512_pins[] = { |
| 162, 163, 165, 166, 148, 199, 200, 201, 202, 216, 217, 218, 219, 220, |
| 234, 235, 236, 237, 252, 253, 254, 251, 229, 232, 233, 211, 212, 213, |
| 214, 215, 193, 194 |
| }; |
| |
| /* |
| * The parallel flash can be set up in a 26-bit address bus mode exposing |
| * A[0-15] (A[15] takes the place of ALE), but it has the |
| * side effect of stealing pins from GMAC1 and TVC so these blocks cannot be |
| * used at the same time. |
| */ |
| static const unsigned int pflash_3512_pins_extended[] = { |
| 162, 163, 165, 166, 148, 199, 200, 201, 202, 216, 217, 218, 219, 220, |
| 234, 235, 236, 237, 252, 253, 254, 251, 229, 232, 233, 211, 212, 213, |
| 214, 215, 193, 194, |
| /* The extra pins */ |
| 296, 315, 297, 279, 261, 243, 316, 298, 280, 262, 244, 317, 299, 281, |
| 265, |
| }; |
| |
| /* Serial flash pins CE0, CE1, DI, DO, CK */ |
| static const unsigned int sflash_3512_pins[] = { 230, 231, 232, 233, 211 }; |
| |
| /* The GPIO0A (0) pin overlap with TVC and extended parallel flash */ |
| static const unsigned int gpio0a_3512_pins[] = { 265 }; |
| |
| /* The GPIO0B (1-4) pins overlap with TVC and ICE */ |
| static const unsigned int gpio0b_3512_pins[] = { 320, 302, 284, 266 }; |
| |
| /* The GPIO0C (5-7) pins overlap with ICE */ |
| static const unsigned int gpio0c_3512_pins[] = { 248, 321, 303 }; |
| |
| /* The GPIO0D (9,10) pins overlap with UART RX/TX */ |
| static const unsigned int gpio0d_3512_pins[] = { 267, 322 }; |
| |
| /* The GPIO0E (8,11-15) pins overlap with LPC, UART modem pins, SSP */ |
| static const unsigned int gpio0e_3512_pins[] = { 285, 304, 286, 305, 287, 268 }; |
| |
| /* The GPIO0F (16) pins overlap with LCD */ |
| static const unsigned int gpio0f_3512_pins[] = { 269 }; |
| |
| /* The GPIO0G (17,18) pins overlap with NAND flash CE0, CE1 */ |
| static const unsigned int gpio0g_3512_pins[] = { 249, 250 }; |
| |
| /* The GPIO0H (19,20) pins overlap with parallel flash CE0, CE1 */ |
| static const unsigned int gpio0h_3512_pins[] = { 251, 229 }; |
| |
| /* The GPIO0I (21,22) pins overlap with serial flash CE0, CE1 */ |
| static const unsigned int gpio0i_3512_pins[] = { 230, 231 }; |
| |
| /* The GPIO0J (23) pins overlap with all flash */ |
| static const unsigned int gpio0j_3512_pins[] = { 232 }; |
| |
| /* The GPIO0K (24,25) pins overlap with all flash and LCD */ |
| static const unsigned int gpio0k_3512_pins[] = { 233, 211 }; |
| |
| /* The GPIO0L (26-29) pins overlap with parallel flash */ |
| static const unsigned int gpio0l_3512_pins[] = { 212, 213, 214, 215 }; |
| |
| /* The GPIO0M (30,31) pins overlap with parallel flash and NAND flash */ |
| static const unsigned int gpio0m_3512_pins[] = { 193, 194 }; |
| |
| /* The GPIO1A (0-4) pins that overlap with IDE and parallel flash */ |
| static const unsigned int gpio1a_3512_pins[] = { 162, 163, 165, 166, 148 }; |
| |
| /* The GPIO1B (5-10, 27) pins overlap with just IDE */ |
| static const unsigned int gpio1b_3512_pins[] = { |
| 180, 181, 182, 183, 184, 198, 255 |
| }; |
| |
| /* The GPIO1C (11-26) pins overlap with IDE, parallel flash and NAND flash */ |
| static const unsigned int gpio1c_3512_pins[] = { |
| 199, 200, 201, 202, 216, 217, 218, 219, 220, 234, 235, 236, 237, |
| 252, 253, 254 |
| }; |
| |
| /* The GPIO1D (28-31) pins overlap with LCD and TVC */ |
| static const unsigned int gpio1d_3512_pins[] = { 246, 319, 301, 283 }; |
| |
| /* The GPIO2A (0-3) pins overlap with GMII GMAC1 and extended parallel flash */ |
| static const unsigned int gpio2a_3512_pins[] = { 315, 297, 279, 261 }; |
| |
| /* The GPIO2B (4-7) pins overlap with GMII GMAC1, extended parallel flash and LCD */ |
| static const unsigned int gpio2b_3512_pins[] = { 262, 244, 317, 299 }; |
| |
| /* The GPIO2C (8-31) pins overlap with PCI */ |
| static const unsigned int gpio2c_3512_pins[] = { |
| 17, 34, 35, 51, 52, 53, 68, 69, 71, 86, 87, 88, 89, 103, 104, 105, |
| 140, 141, 142, 143, 157, 158, 159, 160 |
| }; |
| |
| /* Groups for the 3512 SoC/package */ |
| static const struct gemini_pin_group gemini_3512_pin_groups[] = { |
| { |
| .name = "gndgrp", |
| .pins = gnd_3512_pins, |
| .num_pins = ARRAY_SIZE(gnd_3512_pins), |
| }, |
| { |
| .name = "dramgrp", |
| .pins = dram_3512_pins, |
| .num_pins = ARRAY_SIZE(dram_3512_pins), |
| .mask = DRAM_PADS_POWERDOWN, |
| }, |
| { |
| .name = "rtcgrp", |
| .pins = rtc_3512_pins, |
| .num_pins = ARRAY_SIZE(rtc_3512_pins), |
| }, |
| { |
| .name = "powergrp", |
| .pins = power_3512_pins, |
| .num_pins = ARRAY_SIZE(power_3512_pins), |
| }, |
| { |
| .name = "systemgrp", |
| .pins = system_3512_pins, |
| .num_pins = ARRAY_SIZE(system_3512_pins), |
| }, |
| { |
| .name = "vcontrolgrp", |
| .pins = vcontrol_3512_pins, |
| .num_pins = ARRAY_SIZE(vcontrol_3512_pins), |
| }, |
| { |
| .name = "icegrp", |
| .pins = ice_3512_pins, |
| .num_pins = ARRAY_SIZE(ice_3512_pins), |
| /* Conflict with some GPIO groups */ |
| }, |
| { |
| .name = "idegrp", |
| .pins = ide_3512_pins, |
| .num_pins = ARRAY_SIZE(ide_3512_pins), |
| /* Conflict with all flash usage */ |
| .value = IDE_PADS_ENABLE | NAND_PADS_DISABLE | |
| PFLASH_PADS_DISABLE | SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "satagrp", |
| .pins = sata_3512_pins, |
| .num_pins = ARRAY_SIZE(sata_3512_pins), |
| }, |
| { |
| .name = "usbgrp", |
| .pins = usb_3512_pins, |
| .num_pins = ARRAY_SIZE(usb_3512_pins), |
| }, |
| { |
| .name = "gmii_gmac0_grp", |
| .pins = gmii_gmac0_3512_pins, |
| .num_pins = ARRAY_SIZE(gmii_gmac0_3512_pins), |
| }, |
| { |
| .name = "gmii_gmac1_grp", |
| .pins = gmii_gmac1_3512_pins, |
| .num_pins = ARRAY_SIZE(gmii_gmac1_3512_pins), |
| /* Bring out RGMII on the GMAC1 pins */ |
| .value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII, |
| }, |
| { |
| .name = "pcigrp", |
| .pins = pci_3512_pins, |
| .num_pins = ARRAY_SIZE(pci_3512_pins), |
| /* Conflict only with GPIO2 */ |
| .value = PCI_PADS_ENABLE | PCI_CLK_PAD_ENABLE, |
| }, |
| { |
| .name = "lpcgrp", |
| .pins = lpc_3512_pins, |
| .num_pins = ARRAY_SIZE(lpc_3512_pins), |
| /* Conflict with SSP and UART modem pins */ |
| .mask = SSP_PADS_ENABLE, |
| .value = LPC_PADS_ENABLE | LPC_CLK_PAD_ENABLE, |
| }, |
| { |
| .name = "lcdgrp", |
| .pins = lcd_3512_pins, |
| .num_pins = ARRAY_SIZE(lcd_3512_pins), |
| /* Conflict with TVC and ICE */ |
| .mask = TVC_PADS_ENABLE, |
| .value = LCD_PADS_ENABLE, |
| }, |
| { |
| .name = "sspgrp", |
| .pins = ssp_3512_pins, |
| .num_pins = ARRAY_SIZE(ssp_3512_pins), |
| /* Conflict with LPC and UART modem pins */ |
| .mask = LPC_PADS_ENABLE, |
| .value = SSP_PADS_ENABLE, |
| }, |
| { |
| .name = "uartrxtxgrp", |
| .pins = uart_rxtx_3512_pins, |
| .num_pins = ARRAY_SIZE(uart_rxtx_3512_pins), |
| /* No conflicts except GPIO */ |
| }, |
| { |
| .name = "uartmodemgrp", |
| .pins = uart_modem_3512_pins, |
| .num_pins = ARRAY_SIZE(uart_modem_3512_pins), |
| /* |
| * Conflict with LPC and SSP, |
| * so when those are both disabled, modem UART can thrive. |
| */ |
| .mask = LPC_PADS_ENABLE | SSP_PADS_ENABLE, |
| }, |
| { |
| .name = "tvcgrp", |
| .pins = tvc_3512_pins, |
| .num_pins = ARRAY_SIZE(tvc_3512_pins), |
| /* Conflict with character LCD and ICE */ |
| .mask = LCD_PADS_ENABLE, |
| .value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE, |
| }, |
| /* |
| * The construction is done such that it is possible to use a serial |
| * flash together with a NAND or parallel (NOR) flash, but it is not |
| * possible to use NAND and parallel flash together. To use serial |
| * flash with one of the two others, the muxbits need to be flipped |
| * around before any access. |
| */ |
| { |
| .name = "nflashgrp", |
| .pins = nflash_3512_pins, |
| .num_pins = ARRAY_SIZE(nflash_3512_pins), |
| /* Conflict with IDE, parallel and serial flash */ |
| .mask = NAND_PADS_DISABLE | IDE_PADS_ENABLE, |
| .value = PFLASH_PADS_DISABLE | SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "pflashgrp", |
| .pins = pflash_3512_pins, |
| .num_pins = ARRAY_SIZE(pflash_3512_pins), |
| /* Conflict with IDE, NAND and serial flash */ |
| .mask = PFLASH_PADS_DISABLE | IDE_PADS_ENABLE, |
| .value = NAND_PADS_DISABLE | SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "sflashgrp", |
| .pins = sflash_3512_pins, |
| .num_pins = ARRAY_SIZE(sflash_3512_pins), |
| /* Conflict with IDE, NAND and parallel flash */ |
| .mask = SFLASH_PADS_DISABLE | IDE_PADS_ENABLE, |
| .value = NAND_PADS_DISABLE | PFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0agrp", |
| .pins = gpio0a_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0a_3512_pins), |
| /* Conflict with TVC */ |
| .mask = TVC_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio0bgrp", |
| .pins = gpio0b_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0b_3512_pins), |
| /* Conflict with TVC and ICE */ |
| .mask = TVC_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio0cgrp", |
| .pins = gpio0c_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0c_3512_pins), |
| /* Conflict with ICE */ |
| }, |
| { |
| .name = "gpio0dgrp", |
| .pins = gpio0d_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0d_3512_pins), |
| /* Conflict with UART RX/TX */ |
| }, |
| { |
| .name = "gpio0egrp", |
| .pins = gpio0e_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0e_3512_pins), |
| /* Conflict with LPC, UART modem pins, SSP */ |
| .mask = LPC_PADS_ENABLE | SSP_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio0fgrp", |
| .pins = gpio0f_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0f_3512_pins), |
| /* Conflict with LCD */ |
| .mask = LCD_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio0ggrp", |
| .pins = gpio0g_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0g_3512_pins), |
| /* Conflict with NAND flash */ |
| .value = NAND_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0hgrp", |
| .pins = gpio0h_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0h_3512_pins), |
| /* Conflict with parallel flash */ |
| .value = PFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0igrp", |
| .pins = gpio0i_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0i_3512_pins), |
| /* Conflict with serial flash */ |
| .value = SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0jgrp", |
| .pins = gpio0j_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0j_3512_pins), |
| /* Conflict with all flash */ |
| .value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE | |
| SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0kgrp", |
| .pins = gpio0k_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0k_3512_pins), |
| /* Conflict with all flash and LCD */ |
| .mask = LCD_PADS_ENABLE, |
| .value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE | |
| SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0lgrp", |
| .pins = gpio0l_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0l_3512_pins), |
| /* Conflict with parallel flash */ |
| .value = PFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0mgrp", |
| .pins = gpio0m_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio0m_3512_pins), |
| /* Conflict with parallel and NAND flash */ |
| .value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio1agrp", |
| .pins = gpio1a_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio1a_3512_pins), |
| /* Conflict with IDE and parallel flash */ |
| .mask = IDE_PADS_ENABLE, |
| .value = PFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio1bgrp", |
| .pins = gpio1b_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio1b_3512_pins), |
| /* Conflict with IDE only */ |
| .mask = IDE_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio1cgrp", |
| .pins = gpio1c_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio1c_3512_pins), |
| /* Conflict with IDE, parallel and NAND flash */ |
| .mask = IDE_PADS_ENABLE, |
| .value = NAND_PADS_DISABLE | PFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio1dgrp", |
| .pins = gpio1d_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio1d_3512_pins), |
| /* Conflict with LCD and TVC */ |
| .mask = LCD_PADS_ENABLE | TVC_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio2agrp", |
| .pins = gpio2a_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio2a_3512_pins), |
| .mask = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII, |
| /* Conflict with GMII GMAC1 and extended parallel flash */ |
| }, |
| { |
| .name = "gpio2bgrp", |
| .pins = gpio2b_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio2b_3512_pins), |
| /* Conflict with GMII GMAC1, extended parallel flash and LCD */ |
| .mask = LCD_PADS_ENABLE | GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII, |
| }, |
| { |
| .name = "gpio2cgrp", |
| .pins = gpio2c_3512_pins, |
| .num_pins = ARRAY_SIZE(gpio2c_3512_pins), |
| /* Conflict with PCI */ |
| .mask = PCI_PADS_ENABLE, |
| }, |
| }; |
| |
| /* Pin names for the pinmux subsystem, 3516 variant */ |
| static const struct pinctrl_pin_desc gemini_3516_pins[] = { |
| /* Row A */ |
| PINCTRL_PIN(0, "A1 AVCC3IOHA"), |
| PINCTRL_PIN(1, "A2 DRAM CK N"), |
| PINCTRL_PIN(2, "A3 DRAM CK"), |
| PINCTRL_PIN(3, "A4 DRAM DQM1"), |
| PINCTRL_PIN(4, "A5 DRAM DQ9"), |
| PINCTRL_PIN(5, "A6 DRAM DQ13"), |
| PINCTRL_PIN(6, "A7 DRAM DQ1"), |
| PINCTRL_PIN(7, "A8 DRAM DQ2"), |
| PINCTRL_PIN(8, "A9 DRAM DQ4"), |
| PINCTRL_PIN(9, "A10 DRAM VREF"), |
| PINCTRL_PIN(10, "A11 DRAM DQ24"), |
| PINCTRL_PIN(11, "A12 DRAM DQ28"), |
| PINCTRL_PIN(12, "A13 DRAM DQ30"), |
| PINCTRL_PIN(13, "A14 DRAM DQ18"), |
| PINCTRL_PIN(14, "A15 DRAM DQ21"), |
| PINCTRL_PIN(15, "A16 DRAM CAS_N"), |
| PINCTRL_PIN(16, "A17 DRAM BA1"), |
| PINCTRL_PIN(17, "A18 PCI INTA N"), |
| PINCTRL_PIN(18, "A19 PCI INTB N"), |
| PINCTRL_PIN(19, "A20 PCI INTC N"), |
| /* Row B */ |
| PINCTRL_PIN(20, "B1 PWR EN"), |
| PINCTRL_PIN(21, "B2 GND"), |
| PINCTRL_PIN(22, "B3 RTC CLKO"), |
| PINCTRL_PIN(23, "B4 DRAM A5"), |
| PINCTRL_PIN(24, "B5 DRAM A6"), |
| PINCTRL_PIN(25, "B6 DRAM DQS1"), |
| PINCTRL_PIN(26, "B7 DRAM DQ11"), |
| PINCTRL_PIN(27, "B8 DRAM DQ0"), |
| PINCTRL_PIN(28, "B9 DRAM DQS0"), |
| PINCTRL_PIN(29, "B10 DRAM DQ7"), |
| PINCTRL_PIN(30, "B11 DRAM DQS3"), |
| PINCTRL_PIN(31, "B12 DRAM DQ27"), |
| PINCTRL_PIN(32, "B13 DRAM DQ31"), |
| PINCTRL_PIN(33, "B14 DRAM DQ20"), |
| PINCTRL_PIN(34, "B15 DRAM DQS2"), |
| PINCTRL_PIN(35, "B16 DRAM WE N"), |
| PINCTRL_PIN(36, "B17 DRAM A10"), |
| PINCTRL_PIN(37, "B18 DRAM A2"), |
| PINCTRL_PIN(38, "B19 GND"), |
| PINCTRL_PIN(39, "B20 PCI GNT0 N"), |
| /* Row C */ |
| PINCTRL_PIN(40, "C1 AGNDIOHA"), |
| PINCTRL_PIN(41, "C2 XTALI"), |
| PINCTRL_PIN(42, "C3 GND"), |
| PINCTRL_PIN(43, "C4 RTC CLKI"), |
| PINCTRL_PIN(44, "C5 DRAM A12"), |
| PINCTRL_PIN(45, "C6 DRAM A11"), |
| PINCTRL_PIN(46, "C7 DRAM DQ8"), |
| PINCTRL_PIN(47, "C8 DRAM DQ10"), |
| PINCTRL_PIN(48, "C9 DRAM DQ3"), |
| PINCTRL_PIN(49, "C10 DRAM DQ6"), |
| PINCTRL_PIN(50, "C11 DRAM DQM0"), |
| PINCTRL_PIN(51, "C12 DRAM DQ26"), |
| PINCTRL_PIN(52, "C13 DRAM DQ16"), |
| PINCTRL_PIN(53, "C14 DRAM DQ22"), |
| PINCTRL_PIN(54, "C15 DRAM DQM2"), |
| PINCTRL_PIN(55, "C16 DRAM BA0"), |
| PINCTRL_PIN(56, "C17 DRAM A3"), |
| PINCTRL_PIN(57, "C18 GND"), |
| PINCTRL_PIN(58, "C19 PCI GNT1 N"), |
| PINCTRL_PIN(59, "C20 PCI REQ2 N"), |
| /* Row D */ |
| PINCTRL_PIN(60, "D1 AVCC3IOAHA"), |
| PINCTRL_PIN(61, "D2 AVCCKHA"), |
| PINCTRL_PIN(62, "D3 XTALO"), |
| PINCTRL_PIN(63, "D4 GND"), |
| PINCTRL_PIN(64, "D5 CIR RXD"), |
| PINCTRL_PIN(65, "D6 DRAM A7"), |
| PINCTRL_PIN(66, "D7 DRAM A4"), |
| PINCTRL_PIN(67, "D8 DRAM A8"), |
| PINCTRL_PIN(68, "D9 DRAM CKE"), |
| PINCTRL_PIN(69, "D10 DRAM DQ14"), |
| PINCTRL_PIN(70, "D11 DRAM DQ5"), |
| PINCTRL_PIN(71, "D12 DRAM DQ25"), |
| PINCTRL_PIN(72, "D13 DRAM DQ17"), |
| PINCTRL_PIN(73, "D14 DRAM DQ23"), |
| PINCTRL_PIN(74, "D15 DRAM RAS N"), |
| PINCTRL_PIN(75, "D16 DRAM A1"), |
| PINCTRL_PIN(76, "D17 GND"), |
| PINCTRL_PIN(77, "D18 EXT RESET N"), |
| PINCTRL_PIN(78, "D19 PCI REQ1 N"), |
| PINCTRL_PIN(79, "D20 PCI REQ3 N"), |
| /* Row E */ |
| PINCTRL_PIN(80, "E1 VCC2IO CTRL"), |
| PINCTRL_PIN(81, "E2 VREF CTRL"), |
| PINCTRL_PIN(82, "E3 CIR RST N"), |
| PINCTRL_PIN(83, "E4 PWR BTN"), |
| PINCTRL_PIN(84, "E5 GND"), |
| PINCTRL_PIN(85, "E6 CIR TXD"), |
| PINCTRL_PIN(86, "E7 VCCK CTRL"), |
| PINCTRL_PIN(87, "E8 DRAM A9"), |
| PINCTRL_PIN(88, "E9 DRAM DQ12"), |
| PINCTRL_PIN(89, "E10 DRAM DQ15"), |
| PINCTRL_PIN(90, "E11 DRAM DQM3"), |
| PINCTRL_PIN(91, "E12 DRAM DQ29"), |
| PINCTRL_PIN(92, "E13 DRAM DQ19"), |
| PINCTRL_PIN(93, "E14 DRAM A13"), |
| PINCTRL_PIN(94, "E15 DRAM A0"), |
| PINCTRL_PIN(95, "E16 GND"), |
| PINCTRL_PIN(96, "E17 PCI INTD N"), |
| PINCTRL_PIN(97, "E18 PCI GNT3 N"), |
| PINCTRL_PIN(98, "E19 PCI AD29"), |
| PINCTRL_PIN(99, "E20 PCI AD28"), |
| /* Row F */ |
| PINCTRL_PIN(100, "F1 AVCCKHB"), |
| PINCTRL_PIN(101, "F2 AVCCK P"), |
| PINCTRL_PIN(102, "F3 EBG"), |
| PINCTRL_PIN(103, "F4 REXT"), |
| PINCTRL_PIN(104, "F5 AVCC3IOHB"), |
| PINCTRL_PIN(105, "F6 GND"), |
| PINCTRL_PIN(106, "F7 VCC2IOHA 2"), |
| PINCTRL_PIN(107, "F8 VCC2IOHA 2"), |
| PINCTRL_PIN(108, "F9 VCC2IOHA 2"), |
| PINCTRL_PIN(109, "F10 V1"), |
| PINCTRL_PIN(110, "F11 V1"), |
| PINCTRL_PIN(111, "F12 VCC2IOHA 2"), |
| PINCTRL_PIN(112, "F13 VCC2IOHA 2"), |
| PINCTRL_PIN(113, "F14 VCC2IOHA 2"), |
| PINCTRL_PIN(114, "F15 GND"), |
| PINCTRL_PIN(115, "F16 PCI CLK"), |
| PINCTRL_PIN(116, "F17 PCI GNT2 N"), |
| PINCTRL_PIN(117, "F18 PCI AD31"), |
| PINCTRL_PIN(118, "F19 PCI AD26"), |
| PINCTRL_PIN(119, "F20 PCI CBE3 N"), |
| /* Row G */ |
| PINCTRL_PIN(120, "G1 SATA0 RXDP"), |
| PINCTRL_PIN(121, "G2 SATA0 RXDN"), |
| PINCTRL_PIN(122, "G3 AGNDK 0"), |
| PINCTRL_PIN(123, "G4 AVCCK S"), |
| PINCTRL_PIN(124, "G5 AVCC3 S"), |
| PINCTRL_PIN(125, "G6 VCC2IOHA 2"), |
| PINCTRL_PIN(126, "G7 GND"), |
| PINCTRL_PIN(127, "G8 VCC2IOHA 2"), |
| PINCTRL_PIN(128, "G9 V1"), |
| PINCTRL_PIN(129, "G10 V1"), |
| PINCTRL_PIN(130, "G11 V1"), |
| PINCTRL_PIN(131, "G12 V1"), |
| PINCTRL_PIN(132, "G13 VCC2IOHA 2"), |
| PINCTRL_PIN(133, "G14 GND"), |
| PINCTRL_PIN(134, "G15 VCC3IOHA"), |
| PINCTRL_PIN(135, "G16 PCI REQ0 N"), |
| PINCTRL_PIN(136, "G17 PCI AD30"), |
| PINCTRL_PIN(137, "G18 PCI AD24"), |
| PINCTRL_PIN(138, "G19 PCI AD23"), |
| PINCTRL_PIN(139, "G20 PCI AD21"), |
| /* Row H */ |
| PINCTRL_PIN(140, "H1 SATA0 TXDP"), |
| PINCTRL_PIN(141, "H2 SATA0 TXDN"), |
| PINCTRL_PIN(142, "H3 AGNDK 1"), |
| PINCTRL_PIN(143, "H4 AVCCK 0"), |
| PINCTRL_PIN(144, "H5 TEST CLKOUT"), |
| PINCTRL_PIN(145, "H6 AGND"), |
| PINCTRL_PIN(146, "H7 VCC2IOHA 2"), |
| PINCTRL_PIN(147, "H8 GND"), |
| PINCTRL_PIN(148, "H9 GND"), |
| PINCTRL_PIN(149, "H10 GDN"), |
| PINCTRL_PIN(150, "H11 GND"), |
| PINCTRL_PIN(151, "H12 GND"), |
| PINCTRL_PIN(152, "H13 GND"), |
| PINCTRL_PIN(153, "H14 VCC3IOHA"), |
| PINCTRL_PIN(154, "H15 VCC3IOHA"), |
| PINCTRL_PIN(155, "H16 PCI AD27"), |
| PINCTRL_PIN(156, "H17 PCI AD25"), |
| PINCTRL_PIN(157, "H18 PCI AD22"), |
| PINCTRL_PIN(158, "H19 PCI AD18"), |
| PINCTRL_PIN(159, "H20 PCI AD17"), |
| /* Row J (for some reason I is skipped) */ |
| PINCTRL_PIN(160, "J1 SATA1 TXDP"), |
| PINCTRL_PIN(161, "J2 SATA1 TXDN"), |
| PINCTRL_PIN(162, "J3 AGNDK 2"), |
| PINCTRL_PIN(163, "J4 AVCCK 1"), |
| PINCTRL_PIN(164, "J5 AGND"), |
| PINCTRL_PIN(165, "J6 AGND"), |
| PINCTRL_PIN(166, "J7 V1"), |
| PINCTRL_PIN(167, "J8 GND"), |
| PINCTRL_PIN(168, "J9 GND"), |
| PINCTRL_PIN(169, "J10 GND"), |
| PINCTRL_PIN(170, "J11 GND"), |
| PINCTRL_PIN(171, "J12 GND"), |
| PINCTRL_PIN(172, "J13 GND"), |
| PINCTRL_PIN(173, "J14 V1"), |
| PINCTRL_PIN(174, "J15 VCC3IOHA"), |
| PINCTRL_PIN(175, "J16 PCI AD19"), |
| PINCTRL_PIN(176, "J17 PCI AD20"), |
| PINCTRL_PIN(177, "J18 PCI AD16"), |
| PINCTRL_PIN(178, "J19 PCI CBE2 N"), |
| PINCTRL_PIN(179, "J20 PCI FRAME N"), |
| /* Row K */ |
| PINCTRL_PIN(180, "K1 SATA1 RXDP"), |
| PINCTRL_PIN(181, "K2 SATA1 RXDN"), |
| PINCTRL_PIN(182, "K3 AGNDK 3"), |
| PINCTRL_PIN(183, "K4 AVCCK 2"), |
| PINCTRL_PIN(184, "K5 AGND"), |
| PINCTRL_PIN(185, "K6 V1"), |
| PINCTRL_PIN(186, "K7 V1"), |
| PINCTRL_PIN(187, "K8 GND"), |
| PINCTRL_PIN(188, "K9 GND"), |
| PINCTRL_PIN(189, "K10 GND"), |
| PINCTRL_PIN(190, "K11 GND"), |
| PINCTRL_PIN(191, "K12 GND"), |
| PINCTRL_PIN(192, "K13 GND"), |
| PINCTRL_PIN(193, "K14 V1"), |
| PINCTRL_PIN(194, "K15 V1"), |
| PINCTRL_PIN(195, "K16 PCI TRDY N"), |
| PINCTRL_PIN(196, "K17 PCI IRDY N"), |
| PINCTRL_PIN(197, "K18 PCI DEVSEL N"), |
| PINCTRL_PIN(198, "K19 PCI STOP N"), |
| PINCTRL_PIN(199, "K20 PCI PAR"), |
| /* Row L */ |
| PINCTRL_PIN(200, "L1 IDE CS0 N"), |
| PINCTRL_PIN(201, "L2 IDE DA0"), |
| PINCTRL_PIN(202, "L3 AVCCK 3"), |
| PINCTRL_PIN(203, "L4 AGND"), |
| PINCTRL_PIN(204, "L5 IDE DIOR N"), |
| PINCTRL_PIN(205, "L6 V1"), |
| PINCTRL_PIN(206, "L7 V1"), |
| PINCTRL_PIN(207, "L8 GND"), |
| PINCTRL_PIN(208, "L9 GND"), |
| PINCTRL_PIN(209, "L10 GND"), |
| PINCTRL_PIN(210, "L11 GND"), |
| PINCTRL_PIN(211, "L12 GND"), |
| PINCTRL_PIN(212, "L13 GND"), |
| PINCTRL_PIN(213, "L14 V1"), |
| PINCTRL_PIN(214, "L15 V1"), |
| PINCTRL_PIN(215, "L16 PCI AD12"), |
| PINCTRL_PIN(216, "L17 PCI AD13"), |
| PINCTRL_PIN(217, "L18 PCI AD14"), |
| PINCTRL_PIN(218, "L19 PCI AD15"), |
| PINCTRL_PIN(219, "L20 PCI CBE1 N"), |
| /* Row M */ |
| PINCTRL_PIN(220, "M1 IDE DA1"), |
| PINCTRL_PIN(221, "M2 IDE CS1 N"), |
| PINCTRL_PIN(222, "M3 IDE DA2"), |
| PINCTRL_PIN(223, "M4 IDE DMACK N"), |
| PINCTRL_PIN(224, "M5 IDE DD1"), |
| PINCTRL_PIN(225, "M6 VCC3IOHA"), |
| PINCTRL_PIN(226, "M7 V1"), |
| PINCTRL_PIN(227, "M8 GND"), |
| PINCTRL_PIN(228, "M9 GND"), |
| PINCTRL_PIN(229, "M10 GND"), |
| PINCTRL_PIN(230, "M11 GND"), |
| PINCTRL_PIN(231, "M12 GND"), |
| PINCTRL_PIN(232, "M13 GND"), |
| PINCTRL_PIN(233, "M14 V1"), |
| PINCTRL_PIN(234, "M15 VCC3IOHA"), |
| PINCTRL_PIN(235, "M16 PCI AD7"), |
| PINCTRL_PIN(236, "M17 PCI AD6"), |
| PINCTRL_PIN(237, "M18 PCI AD9"), |
| PINCTRL_PIN(238, "M19 PCI AD10"), |
| PINCTRL_PIN(239, "M20 PCI AD11"), |
| /* Row N */ |
| PINCTRL_PIN(240, "N1 IDE IORDY"), |
| PINCTRL_PIN(241, "N2 IDE INTRQ"), |
| PINCTRL_PIN(242, "N3 IDE DIOW N"), |
| PINCTRL_PIN(243, "N4 IDE DD15"), |
| PINCTRL_PIN(244, "N5 IDE DMARQ"), |
| PINCTRL_PIN(245, "N6 VCC3IOHA"), |
| PINCTRL_PIN(246, "N7 VCC3IOHA"), |
| PINCTRL_PIN(247, "N8 GND"), |
| PINCTRL_PIN(248, "N9 GND"), |
| PINCTRL_PIN(249, "N10 GND"), |
| PINCTRL_PIN(250, "N11 GND"), |
| PINCTRL_PIN(251, "N12 GND"), |
| PINCTRL_PIN(252, "N13 GND"), |
| PINCTRL_PIN(253, "N14 VCC3IOHA"), |
| PINCTRL_PIN(254, "N15 VCC3IOHA"), |
| PINCTRL_PIN(255, "N16 PCI CLKRUN N"), |
| PINCTRL_PIN(256, "N17 PCI AD0"), |
| PINCTRL_PIN(257, "N18 PCI AD4"), |
| PINCTRL_PIN(258, "N19 PCI CBE0 N"), |
| PINCTRL_PIN(259, "N20 PCI AD8"), |
| /* Row P (for some reason O is skipped) */ |
| PINCTRL_PIN(260, "P1 IDE DD0"), |
| PINCTRL_PIN(261, "P2 IDE DD14"), |
| PINCTRL_PIN(262, "P3 IDE DD2"), |
| PINCTRL_PIN(263, "P4 IDE DD4"), |
| PINCTRL_PIN(264, "P5 IDE DD3"), |
| PINCTRL_PIN(265, "P6 VCC3IOHA"), |
| PINCTRL_PIN(266, "P7 GND"), |
| PINCTRL_PIN(267, "P8 VCC2IOHA 1"), |
| PINCTRL_PIN(268, "P9 V1"), |
| PINCTRL_PIN(269, "P10 V1"), |
| PINCTRL_PIN(270, "P11 V1"), |
| PINCTRL_PIN(271, "P12 V1"), |
| PINCTRL_PIN(272, "P13 VCC3IOHA"), |
| PINCTRL_PIN(273, "P14 GND"), |
| PINCTRL_PIN(274, "P15 VCC3IOHA"), |
| PINCTRL_PIN(275, "P16 GPIO0 30"), |
| PINCTRL_PIN(276, "P17 GPIO0 28"), |
| PINCTRL_PIN(277, "P18 PCI AD1"), |
| PINCTRL_PIN(278, "P19 PCI AD3"), |
| PINCTRL_PIN(279, "P20 PCI AD5"), |
| /* Row R (for some reason Q us skipped) */ |
| PINCTRL_PIN(280, "R1 IDE DD13"), |
| PINCTRL_PIN(281, "R2 IDE DD12"), |
| PINCTRL_PIN(282, "R3 IDE DD10"), |
| PINCTRL_PIN(283, "R4 IDE DD6"), |
| PINCTRL_PIN(284, "R5 ICE0 IDI"), |
| PINCTRL_PIN(285, "R6 GND"), |
| PINCTRL_PIN(286, "R7 VCC2IOHA 1"), |
| PINCTRL_PIN(287, "R8 VCC2IOHA 1"), |
| PINCTRL_PIN(288, "R9 VCC2IOHA 1"), |
| PINCTRL_PIN(289, "R10 V1"), |
| PINCTRL_PIN(290, "R11 V1"), |
| PINCTRL_PIN(291, "R12 VCC3IOHA"), |
| PINCTRL_PIN(292, "R13 VCC3IOHA"), |
| PINCTRL_PIN(293, "R14 VCC3IOHA"), |
| PINCTRL_PIN(294, "R15 GND"), |
| PINCTRL_PIN(295, "R16 GPIO0 23"), |
| PINCTRL_PIN(296, "R17 GPIO0 21"), |
| PINCTRL_PIN(297, "R18 GPIO0 26"), |
| PINCTRL_PIN(298, "R19 GPIO0 31"), |
| PINCTRL_PIN(299, "R20 PCI AD2"), |
| /* Row T (for some reason S is skipped) */ |
| PINCTRL_PIN(300, "T1 IDE DD11"), |
| PINCTRL_PIN(301, "T2 IDE DD5"), |
| PINCTRL_PIN(302, "T3 IDE DD8"), |
| PINCTRL_PIN(303, "T4 ICE0 IDO"), |
| PINCTRL_PIN(304, "T5 GND"), |
| PINCTRL_PIN(305, "T6 USB GNDA U20"), |
| PINCTRL_PIN(306, "T7 GMAC0 TXD0"), |
| PINCTRL_PIN(307, "T8 GMAC0 TXEN"), |
| PINCTRL_PIN(308, "T9 GMAC1 TXD3"), |
| PINCTRL_PIN(309, "T10 GMAC1 RXDV"), |
| PINCTRL_PIN(310, "T11 GMAC1 RXD2"), |
| PINCTRL_PIN(311, "T12 GPIO1 29"), |
| PINCTRL_PIN(312, "T13 GPIO0 3"), |
| PINCTRL_PIN(313, "T14 GPIO0 9"), |
| PINCTRL_PIN(314, "T15 GPIO0 16"), |
| PINCTRL_PIN(315, "T16 GND"), |
| PINCTRL_PIN(316, "T17 GPIO0 14"), |
| PINCTRL_PIN(317, "T18 GPIO0 19"), |
| PINCTRL_PIN(318, "T19 GPIO0 27"), |
| PINCTRL_PIN(319, "T20 GPIO0 29"), |
| /* Row U */ |
| PINCTRL_PIN(320, "U1 IDE DD9"), |
| PINCTRL_PIN(321, "U2 IDE DD7"), |
| PINCTRL_PIN(322, "U3 ICE0 ICK"), |
| PINCTRL_PIN(323, "U4 GND"), |
| PINCTRL_PIN(324, "U5 USB XSCO"), |
| PINCTRL_PIN(325, "U6 GMAC0 TXD1"), |
| PINCTRL_PIN(326, "U7 GMAC0 TXD3"), |
| PINCTRL_PIN(327, "U8 GMAC0 TXC"), |
| PINCTRL_PIN(328, "U9 GMAC0 RXD3"), |
| PINCTRL_PIN(329, "U10 GMAC1 TXD0"), |
| PINCTRL_PIN(330, "U11 GMAC1 CRS"), |
| PINCTRL_PIN(331, "U12 EXT CLK"), |
| PINCTRL_PIN(332, "U13 DEV DEF"), |
| PINCTRL_PIN(333, "U14 GPIO0 0"), |
| PINCTRL_PIN(334, "U15 GPIO0 4"), |
| PINCTRL_PIN(335, "U16 GPIO0 10"), |
| PINCTRL_PIN(336, "U17 GND"), |
| PINCTRL_PIN(337, "U18 GPIO0 17"), |
| PINCTRL_PIN(338, "U19 GPIO0 22"), |
| PINCTRL_PIN(339, "U20 GPIO0 25"), |
| /* Row V */ |
| PINCTRL_PIN(340, "V1 ICE0 DBGACK"), |
| PINCTRL_PIN(341, "V2 ICE0 DBGRQ"), |
| PINCTRL_PIN(342, "V3 GND"), |
| PINCTRL_PIN(343, "V4 ICE0 IRST N"), |
| PINCTRL_PIN(344, "V5 USB XSCI"), |
| PINCTRL_PIN(345, "V6 GMAC0 COL"), |
| PINCTRL_PIN(346, "V7 GMAC0 TXD2"), |
| PINCTRL_PIN(347, "V8 GMAC0 RXDV"), |
| PINCTRL_PIN(348, "V9 GMAC0 RXD1"), |
| PINCTRL_PIN(349, "V10 GMAC1 COL"), |
| PINCTRL_PIN(350, "V11 GMAC1 TXC"), |
| PINCTRL_PIN(351, "V12 GMAC1 RXD1"), |
| PINCTRL_PIN(352, "V13 MODE SEL1"), |
| PINCTRL_PIN(353, "V14 GPIO1 28"), |
| PINCTRL_PIN(354, "V15 GPIO0 1"), |
| PINCTRL_PIN(355, "V16 GPIO0 8"), |
| PINCTRL_PIN(356, "V17 GPIO0 11"), |
| PINCTRL_PIN(357, "V18 GND"), |
| PINCTRL_PIN(358, "V19 GPIO0 18"), |
| PINCTRL_PIN(359, "V20 GPIO0 24"), |
| /* Row W */ |
| PINCTRL_PIN(360, "W1 IDE RESET N"), |
| PINCTRL_PIN(361, "W2 GND"), |
| PINCTRL_PIN(362, "W3 USB0 VCCHSRT"), |
| PINCTRL_PIN(363, "W4 USB0 DP"), |
| PINCTRL_PIN(364, "W5 USB VCCA U20"), |
| PINCTRL_PIN(365, "W6 USB1 DP"), |
| PINCTRL_PIN(366, "W7 USB1 GNDHSRT"), |
| PINCTRL_PIN(367, "W8 GMAC0 RXD0"), |
| PINCTRL_PIN(368, "W9 GMAC0 CRS"), |
| PINCTRL_PIN(369, "W10 GMAC1 TXD2"), |
| PINCTRL_PIN(370, "W11 GMAC1 TXEN"), |
| PINCTRL_PIN(371, "W12 GMAC1 RXD3"), |
| PINCTRL_PIN(372, "W13 MODE SEL0"), |
| PINCTRL_PIN(373, "W14 MODE SEL3"), |
| PINCTRL_PIN(374, "W15 GPIO1 31"), |
| PINCTRL_PIN(375, "W16 GPIO0 5"), |
| PINCTRL_PIN(376, "W17 GPIO0 7"), |
| PINCTRL_PIN(377, "W18 GPIO0 12"), |
| PINCTRL_PIN(378, "W19 GND"), |
| PINCTRL_PIN(379, "W20 GPIO0 20"), |
| /* Row Y */ |
| PINCTRL_PIN(380, "Y1 ICE0 IMS"), |
| PINCTRL_PIN(381, "Y2 USB0 GNDHSRT"), |
| PINCTRL_PIN(382, "Y3 USB0 DM"), |
| PINCTRL_PIN(383, "Y4 USB RREF"), |
| PINCTRL_PIN(384, "Y5 USB1 DM"), |
| PINCTRL_PIN(385, "Y6 USB1 VCCHSRT"), |
| PINCTRL_PIN(386, "Y7 GMAC0 RXC"), |
| PINCTRL_PIN(387, "Y8 GMAC0 RXD2"), |
| PINCTRL_PIN(388, "Y9 REF CLK"), |
| PINCTRL_PIN(389, "Y10 GMAC1 TXD1"), |
| PINCTRL_PIN(390, "Y11 GMAC1 RXC"), |
| PINCTRL_PIN(391, "Y12 GMAC1 RXD0"), |
| PINCTRL_PIN(392, "Y13 M30 CLK"), |
| PINCTRL_PIN(393, "Y14 MODE SEL2"), |
| PINCTRL_PIN(394, "Y15 GPIO1 30"), |
| PINCTRL_PIN(395, "Y16 GPIO0 2"), |
| PINCTRL_PIN(396, "Y17 GPIO0 6"), |
| PINCTRL_PIN(397, "Y18 SYS RESET N"), |
| PINCTRL_PIN(398, "Y19 GPIO0 13"), |
| PINCTRL_PIN(399, "Y20 GPIO0 15"), |
| }; |
| |
| /* Digital ground */ |
| static const unsigned int gnd_3516_pins[] = { |
| 21, 38, 42, 57, 63, 76, 84, 95, 105, 114, 126, 133, 147, 148, 149, 150, |
| 151, 152, 167, 168, 169, 170, 171, 172, 187, 188, 189, 190, 191, 192, |
| 207, 208, 209, 210, 211, 212, 227, 228, 229, 230, 231, 232, 247, 248, |
| 249, 250, 251, 252, 266, 273, 285, 294, 304, 315, 323, 336, 342, 357, |
| 361, 378 |
| }; |
| |
| static const unsigned int dram_3516_pins[] = { |
| 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 23, 24, 25, 26, |
| 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 46, 47, 48, 49, 50, |
| 51, 52, 53, 54, 55, 56, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, |
| 87, 88, 89, 90, 91, 92, 93, 94 |
| }; |
| |
| static const unsigned int rtc_3516_pins[] = { 0, 43, 22 }; |
| |
| static const unsigned int power_3516_pins[] = { 20, 83, 40, 41, 60, 61, 62 }; |
| |
| static const unsigned int cir_3516_pins[] = { 85, 64, 82 }; |
| |
| static const unsigned int system_3516_pins[] = { |
| 332, 392, 372, 373, 393, 352, 331, 388, 397, 77 |
| }; |
| |
| static const unsigned int vcontrol_3516_pins[] = { 86, 81, 80 }; |
| |
| static const unsigned int ice_3516_pins[] = { 340, 341, 303, 322, 380, 284, 343 }; |
| |
| static const unsigned int ide_3516_pins[] = { |
| 200, 201, 204, 220, 221, 222, 223, 224, 240, 241, 242, 243, 244, 260, |
| 261, 262, 263, 264, 280, 281, 282, 283, 300, 301, 302, 320, 321, 360 |
| }; |
| |
| static const unsigned int sata_3516_pins[] = { |
| 100, 101, 102, 103, 104, 120, 121, 122, 123, 124, 140, 141, 142, 143, |
| 144, 160, 161, 162, 163, 180, 181, 182, 183, 202 |
| }; |
| |
| static const unsigned int usb_3516_pins[] = { |
| 305, 324, 344, 362, 363, 364, 365, 366, 381, 382, 383, 384, 385 |
| }; |
| |
| /* GMII, ethernet pins */ |
| static const unsigned int gmii_gmac0_3516_pins[] = { |
| 306, 307, 325, 326, 327, 328, 345, 346, 347, 348, 367, 368, 386, 387 |
| }; |
| |
| static const unsigned int gmii_gmac1_3516_pins[] = { |
| 308, 309, 310, 329, 330, 349, 350, 351, 369, 370, 371, 389, 390, 391 |
| }; |
| |
| static const unsigned int pci_3516_pins[] = { |
| 17, 18, 19, 39, 58, 59, 78, 79, 96, 97, 98, 99, 115, 116, 117, 118, |
| 119, 135, 136, 137, 138, 139, 155, 156, 157, 158, 159, 175, 176, 177, |
| 178, 179, 195, 196, 197, 198, 199, 215, 216, 217, 218, 219, 235, 236, |
| 237, 238, 239, 255, 256, 257, 258, 259, 277, 278, 279, 299 |
| }; |
| |
| /* |
| * Apparently the LPC interface is using the PCICLK for the clocking so |
| * PCI needs to be active at the same time. |
| */ |
| static const unsigned int lpc_3516_pins[] = { |
| 355, /* LPC_LAD[0] */ |
| 356, /* LPC_SERIRQ */ |
| 377, /* LPC_LAD[2] */ |
| 398, /* LPC_LFRAME# */ |
| 316, /* LPC_LAD[3] */ |
| 399, /* LPC_LAD[1] */ |
| }; |
| |
| /* Character LCD */ |
| static const unsigned int lcd_3516_pins[] = { |
| 391, 351, 310, 371, 353, 311, 394, 374, 314, 359, 339 |
| }; |
| |
| static const unsigned int ssp_3516_pins[] = { |
| 355, /* SSP_97RST# SSP AC97 Reset, active low */ |
| 356, /* SSP_FSC */ |
| 377, /* SSP_ECLK */ |
| 398, /* SSP_TXD */ |
| 316, /* SSP_RXD */ |
| 399, /* SSP_SCLK */ |
| }; |
| |
| static const unsigned int uart_rxtx_3516_pins[] = { |
| 313, /* UART_SIN serial input, RX */ |
| 335, /* UART_SOUT serial output, TX */ |
| }; |
| |
| static const unsigned int uart_modem_3516_pins[] = { |
| 355, /* UART_NDCD DCD carrier detect */ |
| 356, /* UART_NDTR DTR data terminal ready */ |
| 377, /* UART_NDSR DSR data set ready */ |
| 398, /* UART_NRTS RTS request to send */ |
| 316, /* UART_NCTS CTS clear to send */ |
| 399, /* UART_NRI RI ring indicator */ |
| }; |
| |
| static const unsigned int tvc_3516_pins[] = { |
| 353, /* TVC_DATA[0] */ |
| 311, /* TVC_DATA[1] */ |
| 394, /* TVC_DATA[2] */ |
| 374, /* TVC_DATA[3] */ |
| 333, /* TVC_CLK */ |
| 354, /* TVC_DATA[4] */ |
| 395, /* TVC_DATA[5] */ |
| 312, /* TVC_DATA[6] */ |
| 334, /* TVC_DATA[7] */ |
| }; |
| |
| /* NAND flash pins */ |
| static const unsigned int nflash_3516_pins[] = { |
| 243, 260, 261, 224, 280, 262, 281, 264, 300, 263, 282, 301, 320, 283, |
| 302, 321, 337, 358, 295, 359, 339, 275, 298 |
| }; |
| |
| /* Parallel (NOR) flash pins, D[0-15], A[16-25], CE0, CE1, RB, WE, OE, ALE */ |
| static const unsigned int pflash_3516_pins[] = { |
| 221, 200, 222, 201, 220, 243, 260, 261, 224, 280, 262, 281, 264, 300, |
| 263, 282, 301, 320, 283, 302, 321, 317, 379, 295, 359, 339, 297, 318, |
| 276, 319, 275, 298 |
| }; |
| |
| /* |
| * The parallel flash can be set up in a 26-bit address bus mode exposing |
| * A[0-15] (A[15] takes the place of ALE), but it has the |
| * side effect of stealing pins from GMAC1 and TVC so these blocks cannot be |
| * used at the same time. |
| */ |
| static const unsigned int pflash_3516_pins_extended[] = { |
| 221, 200, 222, 201, 220, 243, 260, 261, 224, 280, 262, 281, 264, 300, |
| 263, 282, 301, 320, 283, 302, 321, 317, 379, 295, 359, 339, 297, 318, |
| 276, 319, 275, 298, |
| /* The extra pins */ |
| 349, 308, 369, 389, 329, 350, 370, 309, 390, 391, 351, 310, 371, 330, |
| 333 |
| }; |
| |
| /* Serial flash pins CE0, CE1, DI, DO, CK */ |
| static const unsigned int sflash_3516_pins[] = { 296, 338, 295, 359, 339 }; |
| |
| /* The GPIO0A (0-4) pins overlap with TVC and extended parallel flash */ |
| static const unsigned int gpio0a_3516_pins[] = { 333, 354, 395, 312, 334 }; |
| |
| /* The GPIO0B (5-7) pins overlap with ICE */ |
| static const unsigned int gpio0b_3516_pins[] = { 375, 396, 376 }; |
| |
| /* The GPIO0C (8,11-15) pins overlap with LPC, UART and SSP */ |
| static const unsigned int gpio0c_3516_pins[] = { 355, 356, 377, 398, 316, 399 }; |
| |
| /* The GPIO0D (9,10) pins overlap with UART RX/TX */ |
| static const unsigned int gpio0d_3516_pins[] = { 313, 335 }; |
| |
| /* The GPIO0E (16) pins overlap with LCD */ |
| static const unsigned int gpio0e_3516_pins[] = { 314 }; |
| |
| /* The GPIO0F (17,18) pins overlap with NAND flash CE0, CE1 */ |
| static const unsigned int gpio0f_3516_pins[] = { 337, 358 }; |
| |
| /* The GPIO0G (19,20,26-29) pins overlap with parallel flash */ |
| static const unsigned int gpio0g_3516_pins[] = { 317, 379, 297, 318, 276, 319 }; |
| |
| /* The GPIO0H (21,22) pins overlap with serial flash CE0, CE1 */ |
| static const unsigned int gpio0h_3516_pins[] = { 296, 338 }; |
| |
| /* The GPIO0I (23) pins overlap with all flash */ |
| static const unsigned int gpio0i_3516_pins[] = { 295 }; |
| |
| /* The GPIO0J (24,25) pins overlap with all flash and LCD */ |
| static const unsigned int gpio0j_3516_pins[] = { 359, 339 }; |
| |
| /* The GPIO0K (30,31) pins overlap with NAND flash */ |
| static const unsigned int gpio0k_3516_pins[] = { 275, 298 }; |
| |
| /* The GPIO1A (0-4) pins that overlap with IDE and parallel flash */ |
| static const unsigned int gpio1a_3516_pins[] = { 221, 200, 222, 201, 220 }; |
| |
| /* The GPIO1B (5-10,27) pins overlap with just IDE */ |
| static const unsigned int gpio1b_3516_pins[] = { 241, 223, 240, 204, 242, 244, 360 }; |
| |
| /* The GPIO1C (11-26) pins overlap with IDE, parallel flash and NAND flash */ |
| static const unsigned int gpio1c_3516_pins[] = { |
| 243, 260, 261, 224, 280, 262, 281, 264, 300, 263, 282, 301, 320, 283, |
| 302, 321 |
| }; |
| |
| /* The GPIO1D (28-31) pins overlap with TVC */ |
| static const unsigned int gpio1d_3516_pins[] = { 353, 311, 394, 374 }; |
| |
| /* The GPIO2A (0-3) pins overlap with GMII GMAC1 and extended parallel flash */ |
| static const unsigned int gpio2a_3516_pins[] = { 308, 369, 389, 329 }; |
| |
| /* The GPIO2B (4-7) pins overlap with GMII GMAC1, extended parallel flash and LCD */ |
| static const unsigned int gpio2b_3516_pins[] = { 391, 351, 310, 371 }; |
| |
| /* The GPIO2C (8-31) pins overlap with PCI */ |
| static const unsigned int gpio2c_3516_pins[] = { |
| 259, 237, 238, 239, 215, 216, 217, 218, 177, 159, 158, 175, 176, 139, |
| 157, 138, 137, 156, 118, 155, 99, 98, 136, 117 |
| }; |
| |
| /* Groups for the 3516 SoC/package */ |
| static const struct gemini_pin_group gemini_3516_pin_groups[] = { |
| { |
| .name = "gndgrp", |
| .pins = gnd_3516_pins, |
| .num_pins = ARRAY_SIZE(gnd_3516_pins), |
| }, |
| { |
| .name = "dramgrp", |
| .pins = dram_3516_pins, |
| .num_pins = ARRAY_SIZE(dram_3516_pins), |
| .mask = DRAM_PADS_POWERDOWN, |
| }, |
| { |
| .name = "rtcgrp", |
| .pins = rtc_3516_pins, |
| .num_pins = ARRAY_SIZE(rtc_3516_pins), |
| }, |
| { |
| .name = "powergrp", |
| .pins = power_3516_pins, |
| .num_pins = ARRAY_SIZE(power_3516_pins), |
| }, |
| { |
| .name = "cirgrp", |
| .pins = cir_3516_pins, |
| .num_pins = ARRAY_SIZE(cir_3516_pins), |
| }, |
| { |
| .name = "systemgrp", |
| .pins = system_3516_pins, |
| .num_pins = ARRAY_SIZE(system_3516_pins), |
| }, |
| { |
| .name = "vcontrolgrp", |
| .pins = vcontrol_3516_pins, |
| .num_pins = ARRAY_SIZE(vcontrol_3516_pins), |
| }, |
| { |
| .name = "icegrp", |
| .pins = ice_3516_pins, |
| .num_pins = ARRAY_SIZE(ice_3516_pins), |
| /* Conflict with some GPIO groups */ |
| }, |
| { |
| .name = "idegrp", |
| .pins = ide_3516_pins, |
| .num_pins = ARRAY_SIZE(ide_3516_pins), |
| /* Conflict with all flash usage */ |
| .value = IDE_PADS_ENABLE | NAND_PADS_DISABLE | |
| PFLASH_PADS_DISABLE | SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "satagrp", |
| .pins = sata_3516_pins, |
| .num_pins = ARRAY_SIZE(sata_3516_pins), |
| }, |
| { |
| .name = "usbgrp", |
| .pins = usb_3516_pins, |
| .num_pins = ARRAY_SIZE(usb_3516_pins), |
| }, |
| { |
| .name = "gmii_gmac0_grp", |
| .pins = gmii_gmac0_3516_pins, |
| .num_pins = ARRAY_SIZE(gmii_gmac0_3516_pins), |
| }, |
| { |
| .name = "gmii_gmac1_grp", |
| .pins = gmii_gmac1_3516_pins, |
| .num_pins = ARRAY_SIZE(gmii_gmac1_3516_pins), |
| /* Bring out RGMII on the GMAC1 pins */ |
| .value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII, |
| }, |
| { |
| .name = "pcigrp", |
| .pins = pci_3516_pins, |
| .num_pins = ARRAY_SIZE(pci_3516_pins), |
| /* Conflict only with GPIO2 */ |
| .value = PCI_PADS_ENABLE | PCI_CLK_PAD_ENABLE, |
| }, |
| { |
| .name = "lpcgrp", |
| .pins = lpc_3516_pins, |
| .num_pins = ARRAY_SIZE(lpc_3516_pins), |
| /* Conflict with SSP */ |
| .mask = SSP_PADS_ENABLE, |
| .value = LPC_PADS_ENABLE | LPC_CLK_PAD_ENABLE, |
| }, |
| { |
| .name = "lcdgrp", |
| .pins = lcd_3516_pins, |
| .num_pins = ARRAY_SIZE(lcd_3516_pins), |
| .mask = TVC_PADS_ENABLE, |
| .value = LCD_PADS_ENABLE, |
| }, |
| { |
| .name = "sspgrp", |
| .pins = ssp_3516_pins, |
| .num_pins = ARRAY_SIZE(ssp_3516_pins), |
| /* Conflict with LPC */ |
| .mask = LPC_PADS_ENABLE, |
| .value = SSP_PADS_ENABLE, |
| }, |
| { |
| .name = "uartrxtxgrp", |
| .pins = uart_rxtx_3516_pins, |
| .num_pins = ARRAY_SIZE(uart_rxtx_3516_pins), |
| /* No conflicts except GPIO */ |
| }, |
| { |
| .name = "uartmodemgrp", |
| .pins = uart_modem_3516_pins, |
| .num_pins = ARRAY_SIZE(uart_modem_3516_pins), |
| /* |
| * Conflict with LPC and SSP, |
| * so when those are both disabled, modem UART can thrive. |
| */ |
| .mask = LPC_PADS_ENABLE | SSP_PADS_ENABLE, |
| }, |
| { |
| .name = "tvcgrp", |
| .pins = tvc_3516_pins, |
| .num_pins = ARRAY_SIZE(tvc_3516_pins), |
| /* Conflict with character LCD */ |
| .mask = LCD_PADS_ENABLE, |
| .value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE, |
| }, |
| /* |
| * The construction is done such that it is possible to use a serial |
| * flash together with a NAND or parallel (NOR) flash, but it is not |
| * possible to use NAND and parallel flash together. To use serial |
| * flash with one of the two others, the muxbits need to be flipped |
| * around before any access. |
| */ |
| { |
| .name = "nflashgrp", |
| .pins = nflash_3516_pins, |
| .num_pins = ARRAY_SIZE(nflash_3516_pins), |
| /* Conflict with IDE, parallel and serial flash */ |
| .mask = NAND_PADS_DISABLE | IDE_PADS_ENABLE, |
| .value = PFLASH_PADS_DISABLE | SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "pflashgrp", |
| .pins = pflash_3516_pins, |
| .num_pins = ARRAY_SIZE(pflash_3516_pins), |
| /* Conflict with IDE, NAND and serial flash */ |
| .mask = PFLASH_PADS_DISABLE | IDE_PADS_ENABLE, |
| .value = NAND_PADS_DISABLE | SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "sflashgrp", |
| .pins = sflash_3516_pins, |
| .num_pins = ARRAY_SIZE(sflash_3516_pins), |
| /* Conflict with IDE, NAND and parallel flash */ |
| .mask = SFLASH_PADS_DISABLE | IDE_PADS_ENABLE, |
| .value = NAND_PADS_DISABLE | PFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0agrp", |
| .pins = gpio0a_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0a_3516_pins), |
| /* Conflict with TVC and ICE */ |
| .mask = TVC_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio0bgrp", |
| .pins = gpio0b_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0b_3516_pins), |
| /* Conflict with ICE */ |
| }, |
| { |
| .name = "gpio0cgrp", |
| .pins = gpio0c_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0c_3516_pins), |
| /* Conflict with LPC, UART and SSP */ |
| .mask = LPC_PADS_ENABLE | SSP_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio0dgrp", |
| .pins = gpio0d_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0d_3516_pins), |
| /* Conflict with UART */ |
| }, |
| { |
| .name = "gpio0egrp", |
| .pins = gpio0e_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0e_3516_pins), |
| /* Conflict with LCD */ |
| .mask = LCD_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio0fgrp", |
| .pins = gpio0f_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0f_3516_pins), |
| /* Conflict with NAND flash */ |
| .value = NAND_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0ggrp", |
| .pins = gpio0g_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0g_3516_pins), |
| /* Conflict with parallel flash */ |
| .value = PFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0hgrp", |
| .pins = gpio0h_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0h_3516_pins), |
| /* Conflict with serial flash */ |
| .value = SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0igrp", |
| .pins = gpio0i_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0i_3516_pins), |
| /* Conflict with all flash */ |
| .value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE | |
| SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0jgrp", |
| .pins = gpio0j_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0j_3516_pins), |
| /* Conflict with all flash and LCD */ |
| .mask = LCD_PADS_ENABLE, |
| .value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE | |
| SFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio0kgrp", |
| .pins = gpio0k_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio0k_3516_pins), |
| /* Conflict with parallel and NAND flash */ |
| .value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio1agrp", |
| .pins = gpio1a_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio1a_3516_pins), |
| /* Conflict with IDE and parallel flash */ |
| .mask = IDE_PADS_ENABLE, |
| .value = PFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio1bgrp", |
| .pins = gpio1b_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio1b_3516_pins), |
| /* Conflict with IDE only */ |
| .mask = IDE_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio1cgrp", |
| .pins = gpio1c_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio1c_3516_pins), |
| /* Conflict with IDE, parallel and NAND flash */ |
| .mask = IDE_PADS_ENABLE, |
| .value = NAND_PADS_DISABLE | PFLASH_PADS_DISABLE, |
| }, |
| { |
| .name = "gpio1dgrp", |
| .pins = gpio1d_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio1d_3516_pins), |
| /* Conflict with TVC */ |
| .mask = TVC_PADS_ENABLE, |
| }, |
| { |
| .name = "gpio2agrp", |
| .pins = gpio2a_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio2a_3516_pins), |
| .mask = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII, |
| /* Conflict with GMII GMAC1 and extended parallel flash */ |
| }, |
| { |
| .name = "gpio2bgrp", |
| .pins = gpio2b_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio2b_3516_pins), |
| /* Conflict with GMII GMAC1, extended parallel flash and LCD */ |
| .mask = LCD_PADS_ENABLE | GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII, |
| }, |
| { |
| .name = "gpio2cgrp", |
| .pins = gpio2c_3516_pins, |
| .num_pins = ARRAY_SIZE(gpio2c_3516_pins), |
| /* Conflict with PCI */ |
| .mask = PCI_PADS_ENABLE, |
| }, |
| }; |
| |
| static int gemini_get_groups_count(struct pinctrl_dev *pctldev) |
| { |
| struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); |
| |
| if (pmx->is_3512) |
| return ARRAY_SIZE(gemini_3512_pin_groups); |
| if (pmx->is_3516) |
| return ARRAY_SIZE(gemini_3516_pin_groups); |
| return 0; |
| } |
| |
| static const char *gemini_get_group_name(struct pinctrl_dev *pctldev, |
| unsigned int selector) |
| { |
| struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); |
| |
| if (pmx->is_3512) |
| return gemini_3512_pin_groups[selector].name; |
| if (pmx->is_3516) |
| return gemini_3516_pin_groups[selector].name; |
| return NULL; |
| } |
| |
| static int gemini_get_group_pins(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| const unsigned int **pins, |
| unsigned int *num_pins) |
| { |
| struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); |
| |
| /* The special case with the 3516 flash pin */ |
| if (pmx->flash_pin && |
| pmx->is_3512 && |
| !strcmp(gemini_3512_pin_groups[selector].name, "pflashgrp")) { |
| *pins = pflash_3512_pins_extended; |
| *num_pins = ARRAY_SIZE(pflash_3512_pins_extended); |
| return 0; |
| } |
| if (pmx->flash_pin && |
| pmx->is_3516 && |
| !strcmp(gemini_3516_pin_groups[selector].name, "pflashgrp")) { |
| *pins = pflash_3516_pins_extended; |
| *num_pins = ARRAY_SIZE(pflash_3516_pins_extended); |
| return 0; |
| } |
| if (pmx->is_3512) { |
| *pins = gemini_3512_pin_groups[selector].pins; |
| *num_pins = gemini_3512_pin_groups[selector].num_pins; |
| } |
| if (pmx->is_3516) { |
| *pins = gemini_3516_pin_groups[selector].pins; |
| *num_pins = gemini_3516_pin_groups[selector].num_pins; |
| } |
| return 0; |
| } |
| |
| static void gemini_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, |
| unsigned int offset) |
| { |
| seq_printf(s, " " DRIVER_NAME); |
| } |
| |
| static const struct pinctrl_ops gemini_pctrl_ops = { |
| .get_groups_count = gemini_get_groups_count, |
| .get_group_name = gemini_get_group_name, |
| .get_group_pins = gemini_get_group_pins, |
| .pin_dbg_show = gemini_pin_dbg_show, |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_all, |
| .dt_free_map = pinconf_generic_dt_free_map, |
| }; |
| |
| /** |
| * struct gemini_pmx_func - describes Gemini pinmux functions |
| * @name: the name of this specific function |
| * @groups: corresponding pin groups |
| */ |
| struct gemini_pmx_func { |
| const char *name; |
| const char * const *groups; |
| const unsigned int num_groups; |
| }; |
| |
| static const char * const dramgrps[] = { "dramgrp" }; |
| static const char * const rtcgrps[] = { "rtcgrp" }; |
| static const char * const powergrps[] = { "powergrp" }; |
| static const char * const cirgrps[] = { "cirgrp" }; |
| static const char * const systemgrps[] = { "systemgrp" }; |
| static const char * const vcontrolgrps[] = { "vcontrolgrp" }; |
| static const char * const icegrps[] = { "icegrp" }; |
| static const char * const idegrps[] = { "idegrp" }; |
| static const char * const satagrps[] = { "satagrp" }; |
| static const char * const usbgrps[] = { "usbgrp" }; |
| static const char * const gmiigrps[] = { "gmii_gmac0_grp", "gmii_gmac1_grp" }; |
| static const char * const pcigrps[] = { "pcigrp" }; |
| static const char * const lpcgrps[] = { "lpcgrp" }; |
| static const char * const lcdgrps[] = { "lcdgrp" }; |
| static const char * const sspgrps[] = { "sspgrp" }; |
| static const char * const uartgrps[] = { "uartrxtxgrp", "uartmodemgrp" }; |
| static const char * const tvcgrps[] = { "tvcgrp" }; |
| static const char * const nflashgrps[] = { "nflashgrp" }; |
| static const char * const pflashgrps[] = { "pflashgrp", "pflashextgrp" }; |
| static const char * const sflashgrps[] = { "sflashgrp" }; |
| static const char * const gpio0grps[] = { "gpio0agrp", "gpio0bgrp", "gpio0cgrp", |
| "gpio0dgrp", "gpio0egrp", "gpio0fgrp", |
| "gpio0ggrp", "gpio0hgrp", "gpio0igrp", |
| "gpio0jgrp", "gpio0kgrp" }; |
| static const char * const gpio1grps[] = { "gpio1agrp", "gpio1bgrp", "gpio1cgrp", |
| "gpio1dgrp" }; |
| static const char * const gpio2grps[] = { "gpio2agrp", "gpio2bgrp", "gpio2cgrp" }; |
| |
| static const struct gemini_pmx_func gemini_pmx_functions[] = { |
| { |
| .name = "dram", |
| .groups = dramgrps, |
| .num_groups = ARRAY_SIZE(idegrps), |
| }, |
| { |
| .name = "rtc", |
| .groups = rtcgrps, |
| .num_groups = ARRAY_SIZE(rtcgrps), |
| }, |
| { |
| .name = "power", |
| .groups = powergrps, |
| .num_groups = ARRAY_SIZE(powergrps), |
| }, |
| { |
| /* This function is strictly unavailable on 3512 */ |
| .name = "cir", |
| .groups = cirgrps, |
| .num_groups = ARRAY_SIZE(cirgrps), |
| }, |
| { |
| .name = "system", |
| .groups = systemgrps, |
| .num_groups = ARRAY_SIZE(systemgrps), |
| }, |
| { |
| .name = "vcontrol", |
| .groups = vcontrolgrps, |
| .num_groups = ARRAY_SIZE(vcontrolgrps), |
| }, |
| { |
| .name = "ice", |
| .groups = icegrps, |
| .num_groups = ARRAY_SIZE(icegrps), |
| }, |
| { |
| .name = "ide", |
| .groups = idegrps, |
| .num_groups = ARRAY_SIZE(idegrps), |
| }, |
| { |
| .name = "sata", |
| .groups = satagrps, |
| .num_groups = ARRAY_SIZE(satagrps), |
| }, |
| { |
| .name = "usb", |
| .groups = usbgrps, |
| .num_groups = ARRAY_SIZE(usbgrps), |
| }, |
| { |
| .name = "gmii", |
| .groups = gmiigrps, |
| .num_groups = ARRAY_SIZE(gmiigrps), |
| }, |
| { |
| .name = "pci", |
| .groups = pcigrps, |
| .num_groups = ARRAY_SIZE(pcigrps), |
| }, |
| { |
| .name = "lpc", |
| .groups = lpcgrps, |
| .num_groups = ARRAY_SIZE(lpcgrps), |
| }, |
| { |
| .name = "lcd", |
| .groups = lcdgrps, |
| .num_groups = ARRAY_SIZE(lcdgrps), |
| }, |
| { |
| .name = "ssp", |
| .groups = sspgrps, |
| .num_groups = ARRAY_SIZE(sspgrps), |
| }, |
| { |
| .name = "uart", |
| .groups = uartgrps, |
| .num_groups = ARRAY_SIZE(uartgrps), |
| }, |
| { |
| .name = "tvc", |
| .groups = tvcgrps, |
| .num_groups = ARRAY_SIZE(tvcgrps), |
| }, |
| { |
| .name = "nflash", |
| .groups = nflashgrps, |
| .num_groups = ARRAY_SIZE(nflashgrps), |
| }, |
| { |
| .name = "pflash", |
| .groups = pflashgrps, |
| .num_groups = ARRAY_SIZE(pflashgrps), |
| }, |
| { |
| .name = "sflash", |
| .groups = sflashgrps, |
| .num_groups = ARRAY_SIZE(sflashgrps), |
| }, |
| { |
| .name = "gpio0", |
| .groups = gpio0grps, |
| .num_groups = ARRAY_SIZE(gpio0grps), |
| }, |
| { |
| .name = "gpio1", |
| .groups = gpio1grps, |
| .num_groups = ARRAY_SIZE(gpio1grps), |
| }, |
| { |
| .name = "gpio2", |
| .groups = gpio2grps, |
| .num_groups = ARRAY_SIZE(gpio2grps), |
| }, |
| }; |
| |
| |
| static int gemini_pmx_set_mux(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| unsigned int group) |
| { |
| struct gemini_pmx *pmx; |
| const struct gemini_pmx_func *func; |
| const struct gemini_pin_group *grp; |
| u32 before, after, expected; |
| unsigned long tmp; |
| int i; |
| |
| pmx = pinctrl_dev_get_drvdata(pctldev); |
| |
| func = &gemini_pmx_functions[selector]; |
| if (pmx->is_3512) |
| grp = &gemini_3512_pin_groups[group]; |
| else if (pmx->is_3516) |
| grp = &gemini_3516_pin_groups[group]; |
| else { |
| dev_err(pmx->dev, "invalid SoC type\n"); |
| return -ENODEV; |
| } |
| |
| dev_info(pmx->dev, |
| "ACTIVATE function \"%s\" with group \"%s\"\n", |
| func->name, grp->name); |
| |
| regmap_read(pmx->map, GLOBAL_MISC_CTRL, &before); |
| regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL, grp->mask, |
| grp->value); |
| regmap_read(pmx->map, GLOBAL_MISC_CTRL, &after); |
| |
| /* Which bits changed */ |
| before &= PADS_MASK; |
| after &= PADS_MASK; |
| expected = before &= ~grp->mask; |
| expected |= grp->value; |
| expected &= PADS_MASK; |
| |
| /* Print changed states */ |
| tmp = grp->mask; |
| for_each_set_bit(i, &tmp, PADS_MAXBIT) { |
| bool enabled = !(i > 3); |
| |
| /* Did not go low though it should */ |
| if (after & BIT(i)) { |
| dev_err(pmx->dev, |
| "pin group %s could not be %s: " |
| "probably a hardware limitation\n", |
| gemini_padgroups[i], |
| enabled ? "enabled" : "disabled"); |
| dev_err(pmx->dev, |
| "GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n", |
| before, after, expected); |
| } else { |
| dev_info(pmx->dev, |
| "padgroup %s %s\n", |
| gemini_padgroups[i], |
| enabled ? "enabled" : "disabled"); |
| } |
| } |
| |
| tmp = grp->value; |
| for_each_set_bit(i, &tmp, PADS_MAXBIT) { |
| bool enabled = (i > 3); |
| |
| /* Did not go high though it should */ |
| if (!(after & BIT(i))) { |
| dev_err(pmx->dev, |
| "pin group %s could not be %s: " |
| "probably a hardware limitation\n", |
| gemini_padgroups[i], |
| enabled ? "enabled" : "disabled"); |
| dev_err(pmx->dev, |
| "GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n", |
| before, after, expected); |
| } else { |
| dev_info(pmx->dev, |
| "padgroup %s %s\n", |
| gemini_padgroups[i], |
| enabled ? "enabled" : "disabled"); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int gemini_pmx_get_funcs_count(struct pinctrl_dev *pctldev) |
| { |
| return ARRAY_SIZE(gemini_pmx_functions); |
| } |
| |
| static const char *gemini_pmx_get_func_name(struct pinctrl_dev *pctldev, |
| unsigned int selector) |
| { |
| return gemini_pmx_functions[selector].name; |
| } |
| |
| static int gemini_pmx_get_groups(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| const char * const **groups, |
| unsigned int * const num_groups) |
| { |
| *groups = gemini_pmx_functions[selector].groups; |
| *num_groups = gemini_pmx_functions[selector].num_groups; |
| return 0; |
| } |
| |
| static const struct pinmux_ops gemini_pmx_ops = { |
| .get_functions_count = gemini_pmx_get_funcs_count, |
| .get_function_name = gemini_pmx_get_func_name, |
| .get_function_groups = gemini_pmx_get_groups, |
| .set_mux = gemini_pmx_set_mux, |
| }; |
| |
| #define GEMINI_CFGPIN(_n, _r, _lb, _hb) { \ |
| .pin = _n, \ |
| .reg = _r, \ |
| .mask = GENMASK(_hb, _lb) \ |
| } |
| |
| static const struct gemini_pin_conf gemini_confs_3512[] = { |
| GEMINI_CFGPIN(259, GLOBAL_GMAC_CTRL_SKEW, 0, 3), /* GMAC0 RXDV */ |
| GEMINI_CFGPIN(277, GLOBAL_GMAC_CTRL_SKEW, 4, 7), /* GMAC0 RXC */ |
| GEMINI_CFGPIN(241, GLOBAL_GMAC_CTRL_SKEW, 8, 11), /* GMAC0 TXEN */ |
| GEMINI_CFGPIN(312, GLOBAL_GMAC_CTRL_SKEW, 12, 15), /* GMAC0 TXC */ |
| GEMINI_CFGPIN(298, GLOBAL_GMAC_CTRL_SKEW, 16, 19), /* GMAC1 RXDV */ |
| GEMINI_CFGPIN(280, GLOBAL_GMAC_CTRL_SKEW, 20, 23), /* GMAC1 RXC */ |
| GEMINI_CFGPIN(316, GLOBAL_GMAC_CTRL_SKEW, 24, 27), /* GMAC1 TXEN */ |
| GEMINI_CFGPIN(243, GLOBAL_GMAC_CTRL_SKEW, 28, 31), /* GMAC1 TXC */ |
| GEMINI_CFGPIN(295, GLOBAL_GMAC0_DATA_SKEW, 0, 3), /* GMAC0 RXD0 */ |
| GEMINI_CFGPIN(313, GLOBAL_GMAC0_DATA_SKEW, 4, 7), /* GMAC0 RXD1 */ |
| GEMINI_CFGPIN(242, GLOBAL_GMAC0_DATA_SKEW, 8, 11), /* GMAC0 RXD2 */ |
| GEMINI_CFGPIN(260, GLOBAL_GMAC0_DATA_SKEW, 12, 15), /* GMAC0 RXD3 */ |
| GEMINI_CFGPIN(294, GLOBAL_GMAC0_DATA_SKEW, 16, 19), /* GMAC0 TXD0 */ |
| GEMINI_CFGPIN(276, GLOBAL_GMAC0_DATA_SKEW, 20, 23), /* GMAC0 TXD1 */ |
| GEMINI_CFGPIN(258, GLOBAL_GMAC0_DATA_SKEW, 24, 27), /* GMAC0 TXD2 */ |
| GEMINI_CFGPIN(240, GLOBAL_GMAC0_DATA_SKEW, 28, 31), /* GMAC0 TXD3 */ |
| GEMINI_CFGPIN(262, GLOBAL_GMAC1_DATA_SKEW, 0, 3), /* GMAC1 RXD0 */ |
| GEMINI_CFGPIN(244, GLOBAL_GMAC1_DATA_SKEW, 4, 7), /* GMAC1 RXD1 */ |
| GEMINI_CFGPIN(317, GLOBAL_GMAC1_DATA_SKEW, 8, 11), /* GMAC1 RXD2 */ |
| GEMINI_CFGPIN(299, GLOBAL_GMAC1_DATA_SKEW, 12, 15), /* GMAC1 RXD3 */ |
| GEMINI_CFGPIN(261, GLOBAL_GMAC1_DATA_SKEW, 16, 19), /* GMAC1 TXD0 */ |
| GEMINI_CFGPIN(279, GLOBAL_GMAC1_DATA_SKEW, 20, 23), /* GMAC1 TXD1 */ |
| GEMINI_CFGPIN(297, GLOBAL_GMAC1_DATA_SKEW, 24, 27), /* GMAC1 TXD2 */ |
| GEMINI_CFGPIN(315, GLOBAL_GMAC1_DATA_SKEW, 28, 31), /* GMAC1 TXD3 */ |
| }; |
| |
| static const struct gemini_pin_conf gemini_confs_3516[] = { |
| GEMINI_CFGPIN(347, GLOBAL_GMAC_CTRL_SKEW, 0, 3), /* GMAC0 RXDV */ |
| GEMINI_CFGPIN(386, GLOBAL_GMAC_CTRL_SKEW, 4, 7), /* GMAC0 RXC */ |
| GEMINI_CFGPIN(307, GLOBAL_GMAC_CTRL_SKEW, 8, 11), /* GMAC0 TXEN */ |
| GEMINI_CFGPIN(327, GLOBAL_GMAC_CTRL_SKEW, 12, 15), /* GMAC0 TXC */ |
| GEMINI_CFGPIN(309, GLOBAL_GMAC_CTRL_SKEW, 16, 19), /* GMAC1 RXDV */ |
| GEMINI_CFGPIN(390, GLOBAL_GMAC_CTRL_SKEW, 20, 23), /* GMAC1 RXC */ |
| GEMINI_CFGPIN(370, GLOBAL_GMAC_CTRL_SKEW, 24, 27), /* GMAC1 TXEN */ |
| GEMINI_CFGPIN(350, GLOBAL_GMAC_CTRL_SKEW, 28, 31), /* GMAC1 TXC */ |
| GEMINI_CFGPIN(367, GLOBAL_GMAC0_DATA_SKEW, 0, 3), /* GMAC0 RXD0 */ |
| GEMINI_CFGPIN(348, GLOBAL_GMAC0_DATA_SKEW, 4, 7), /* GMAC0 RXD1 */ |
| GEMINI_CFGPIN(387, GLOBAL_GMAC0_DATA_SKEW, 8, 11), /* GMAC0 RXD2 */ |
| GEMINI_CFGPIN(328, GLOBAL_GMAC0_DATA_SKEW, 12, 15), /* GMAC0 RXD3 */ |
| GEMINI_CFGPIN(306, GLOBAL_GMAC0_DATA_SKEW, 16, 19), /* GMAC0 TXD0 */ |
| GEMINI_CFGPIN(325, GLOBAL_GMAC0_DATA_SKEW, 20, 23), /* GMAC0 TXD1 */ |
| GEMINI_CFGPIN(346, GLOBAL_GMAC0_DATA_SKEW, 24, 27), /* GMAC0 TXD2 */ |
| GEMINI_CFGPIN(326, GLOBAL_GMAC0_DATA_SKEW, 28, 31), /* GMAC0 TXD3 */ |
| GEMINI_CFGPIN(391, GLOBAL_GMAC1_DATA_SKEW, 0, 3), /* GMAC1 RXD0 */ |
| GEMINI_CFGPIN(351, GLOBAL_GMAC1_DATA_SKEW, 4, 7), /* GMAC1 RXD1 */ |
| GEMINI_CFGPIN(310, GLOBAL_GMAC1_DATA_SKEW, 8, 11), /* GMAC1 RXD2 */ |
| GEMINI_CFGPIN(371, GLOBAL_GMAC1_DATA_SKEW, 12, 15), /* GMAC1 RXD3 */ |
| GEMINI_CFGPIN(329, GLOBAL_GMAC1_DATA_SKEW, 16, 19), /* GMAC1 TXD0 */ |
| GEMINI_CFGPIN(389, GLOBAL_GMAC1_DATA_SKEW, 20, 23), /* GMAC1 TXD1 */ |
| GEMINI_CFGPIN(369, GLOBAL_GMAC1_DATA_SKEW, 24, 27), /* GMAC1 TXD2 */ |
| GEMINI_CFGPIN(308, GLOBAL_GMAC1_DATA_SKEW, 28, 31), /* GMAC1 TXD3 */ |
| }; |
| |
| static const struct gemini_pin_conf *gemini_get_pin_conf(struct gemini_pmx *pmx, |
| unsigned int pin) |
| { |
| const struct gemini_pin_conf *retconf; |
| int i; |
| |
| for (i = 0; i < pmx->nconfs; i++) { |
| retconf = &gemini_confs_3516[i]; |
| if (retconf->pin == pin) |
| return retconf; |
| } |
| return NULL; |
| } |
| |
| static int gemini_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, |
| unsigned long *config) |
| { |
| struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param = pinconf_to_config_param(*config); |
| const struct gemini_pin_conf *conf; |
| u32 val; |
| |
| switch (param) { |
| case PIN_CONFIG_SKEW_DELAY: |
| conf = gemini_get_pin_conf(pmx, pin); |
| if (!conf) |
| return -ENOTSUPP; |
| regmap_read(pmx->map, conf->reg, &val); |
| val &= conf->mask; |
| val >>= (ffs(conf->mask) - 1); |
| *config = pinconf_to_config_packed(PIN_CONFIG_SKEW_DELAY, val); |
| break; |
| default: |
| return -ENOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int gemini_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, |
| unsigned long *configs, unsigned int num_configs) |
| { |
| struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev); |
| const struct gemini_pin_conf *conf; |
| enum pin_config_param param; |
| u32 arg; |
| int ret = 0; |
| int i; |
| |
| for (i = 0; i < num_configs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| arg = pinconf_to_config_argument(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_SKEW_DELAY: |
| if (arg > 0xf) |
| return -EINVAL; |
| conf = gemini_get_pin_conf(pmx, pin); |
| if (!conf) { |
| dev_err(pmx->dev, |
| "invalid pin for skew delay %d\n", pin); |
| return -ENOTSUPP; |
| } |
| arg <<= (ffs(conf->mask) - 1); |
| dev_dbg(pmx->dev, |
| "set pin %d to skew delay mask %08x, val %08x\n", |
| pin, conf->mask, arg); |
| regmap_update_bits(pmx->map, conf->reg, conf->mask, arg); |
| break; |
| default: |
| dev_err(pmx->dev, "Invalid config param %04x\n", param); |
| return -ENOTSUPP; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static const struct pinconf_ops gemini_pinconf_ops = { |
| .pin_config_get = gemini_pinconf_get, |
| .pin_config_set = gemini_pinconf_set, |
| .is_generic = true, |
| }; |
| |
| static struct pinctrl_desc gemini_pmx_desc = { |
| .name = DRIVER_NAME, |
| .pctlops = &gemini_pctrl_ops, |
| .pmxops = &gemini_pmx_ops, |
| .confops = &gemini_pinconf_ops, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int gemini_pmx_probe(struct platform_device *pdev) |
| { |
| struct gemini_pmx *pmx; |
| struct regmap *map; |
| struct device *dev = &pdev->dev; |
| struct device *parent; |
| unsigned long tmp; |
| u32 val; |
| int ret; |
| int i; |
| |
| /* Create state holders etc for this driver */ |
| pmx = devm_kzalloc(&pdev->dev, sizeof(*pmx), GFP_KERNEL); |
| if (!pmx) |
| return -ENOMEM; |
| |
| pmx->dev = &pdev->dev; |
| parent = dev->parent; |
| if (!parent) { |
| dev_err(dev, "no parent to pin controller\n"); |
| return -ENODEV; |
| } |
| map = syscon_node_to_regmap(parent->of_node); |
| if (IS_ERR(map)) { |
| dev_err(dev, "no syscon regmap\n"); |
| return PTR_ERR(map); |
| } |
| pmx->map = map; |
| |
| /* Check that regmap works at first call, then no more */ |
| ret = regmap_read(map, GLOBAL_WORD_ID, &val); |
| if (ret) { |
| dev_err(dev, "cannot access regmap\n"); |
| return ret; |
| } |
| val >>= 8; |
| val &= 0xffff; |
| if (val == 0x3512) { |
| pmx->is_3512 = true; |
| pmx->confs = gemini_confs_3512; |
| pmx->nconfs = ARRAY_SIZE(gemini_confs_3512); |
| gemini_pmx_desc.pins = gemini_3512_pins; |
| gemini_pmx_desc.npins = ARRAY_SIZE(gemini_3512_pins); |
| dev_info(dev, "detected 3512 chip variant\n"); |
| } else if (val == 0x3516) { |
| pmx->is_3516 = true; |
| pmx->confs = gemini_confs_3516; |
| pmx->nconfs = ARRAY_SIZE(gemini_confs_3516); |
| gemini_pmx_desc.pins = gemini_3516_pins; |
| gemini_pmx_desc.npins = ARRAY_SIZE(gemini_3516_pins); |
| dev_info(dev, "detected 3516 chip variant\n"); |
| } else { |
| dev_err(dev, "unknown chip ID: %04x\n", val); |
| return -ENODEV; |
| } |
| |
| ret = regmap_read(map, GLOBAL_MISC_CTRL, &val); |
| dev_info(dev, "GLOBAL MISC CTRL at boot: 0x%08x\n", val); |
| /* Mask off relevant pads */ |
| val &= PADS_MASK; |
| /* Invert the meaning of the DRAM+flash pads */ |
| val ^= 0x0f; |
| /* Print initial state */ |
| tmp = val; |
| for_each_set_bit(i, &tmp, PADS_MAXBIT) { |
| dev_info(dev, "pad group %s %s\n", gemini_padgroups[i], |
| (val & BIT(i)) ? "enabled" : "disabled"); |
| } |
| |
| /* Check if flash pin is set */ |
| regmap_read(map, GLOBAL_STATUS, &val); |
| pmx->flash_pin = !!(val & GLOBAL_STATUS_FLPIN); |
| dev_info(dev, "flash pin is %s\n", pmx->flash_pin ? "set" : "not set"); |
| |
| pmx->pctl = devm_pinctrl_register(dev, &gemini_pmx_desc, pmx); |
| if (IS_ERR(pmx->pctl)) { |
| dev_err(dev, "could not register pinmux driver\n"); |
| return PTR_ERR(pmx->pctl); |
| } |
| |
| dev_info(dev, "initialized Gemini pin control driver\n"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id gemini_pinctrl_match[] = { |
| { .compatible = "cortina,gemini-pinctrl" }, |
| {}, |
| }; |
| |
| static struct platform_driver gemini_pmx_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = gemini_pinctrl_match, |
| }, |
| .probe = gemini_pmx_probe, |
| }; |
| |
| static int __init gemini_pmx_init(void) |
| { |
| return platform_driver_register(&gemini_pmx_driver); |
| } |
| arch_initcall(gemini_pmx_init); |