| /* |
| * Apple Peripheral System Controller (PSC) |
| * |
| * The PSC is used on the AV Macs to control IO functions not handled |
| * by the VIAs (Ethernet, DSP, SCC). |
| * |
| * TO DO: |
| * |
| * Try to figure out what's going on in pIFR5 and pIFR6. There seem to be |
| * persisant interrupt conditions in those registers and I have no idea what |
| * they are. Granted it doesn't affect since we're not enabling any interrupts |
| * on those levels at the moment, but it would be nice to know. I have a feeling |
| * they aren't actually interrupt lines but data lines (to the DSP?) |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| |
| #include <asm/traps.h> |
| #include <asm/bootinfo.h> |
| #include <asm/macintosh.h> |
| #include <asm/macints.h> |
| #include <asm/mac_psc.h> |
| |
| #define DEBUG_PSC |
| |
| int psc_present; |
| volatile __u8 *psc; |
| |
| irqreturn_t psc_irq(int, void *); |
| |
| /* |
| * Debugging dump, used in various places to see what's going on. |
| */ |
| |
| void psc_debug_dump(void) |
| { |
| int i; |
| |
| if (!psc_present) return; |
| for (i = 0x30 ; i < 0x70 ; i += 0x10) { |
| printk("PSC #%d: IFR = 0x%02X IER = 0x%02X\n", |
| i >> 4, |
| (int) psc_read_byte(pIFRbase + i), |
| (int) psc_read_byte(pIERbase + i)); |
| } |
| } |
| |
| /* |
| * Try to kill all DMA channels on the PSC. Not sure how this his |
| * supposed to work; this is code lifted from macmace.c and then |
| * expanded to cover what I think are the other 7 channels. |
| */ |
| |
| void psc_dma_die_die_die(void) |
| { |
| int i; |
| |
| printk("Killing all PSC DMA channels..."); |
| for (i = 0 ; i < 9 ; i++) { |
| psc_write_word(PSC_CTL_BASE + (i << 4), 0x8800); |
| psc_write_word(PSC_CTL_BASE + (i << 4), 0x1000); |
| psc_write_word(PSC_CMD_BASE + (i << 5), 0x1100); |
| psc_write_word(PSC_CMD_BASE + (i << 5) + 0x10, 0x1100); |
| } |
| printk("done!\n"); |
| } |
| |
| /* |
| * Initialize the PSC. For now this just involves shutting down all |
| * interrupt sources using the IERs. |
| */ |
| |
| void __init psc_init(void) |
| { |
| int i; |
| |
| if (macintosh_config->ident != MAC_MODEL_C660 |
| && macintosh_config->ident != MAC_MODEL_Q840) |
| { |
| psc = NULL; |
| psc_present = 0; |
| return; |
| } |
| |
| /* |
| * The PSC is always at the same spot, but using psc |
| * keeps things consisant with the psc_xxxx functions. |
| */ |
| |
| psc = (void *) PSC_BASE; |
| psc_present = 1; |
| |
| printk("PSC detected at %p\n", psc); |
| |
| psc_dma_die_die_die(); |
| |
| #ifdef DEBUG_PSC |
| psc_debug_dump(); |
| #endif |
| /* |
| * Mask and clear all possible interrupts |
| */ |
| |
| for (i = 0x30 ; i < 0x70 ; i += 0x10) { |
| psc_write_byte(pIERbase + i, 0x0F); |
| psc_write_byte(pIFRbase + i, 0x0F); |
| } |
| } |
| |
| /* |
| * Register the PSC interrupt dispatchers for autovector interrupts 3-6. |
| */ |
| |
| void __init psc_register_interrupts(void) |
| { |
| request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30); |
| request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40); |
| request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50); |
| request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60); |
| } |
| |
| /* |
| * PSC interrupt handler. It's a lot like the VIA interrupt handler. |
| */ |
| |
| irqreturn_t psc_irq(int irq, void *dev_id) |
| { |
| int pIFR = pIFRbase + ((int) dev_id); |
| int pIER = pIERbase + ((int) dev_id); |
| int irq_num; |
| unsigned char irq_bit, events; |
| |
| #ifdef DEBUG_IRQS |
| printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n", |
| irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER)); |
| #endif |
| |
| events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF; |
| if (!events) |
| return IRQ_NONE; |
| |
| irq_num = irq << 3; |
| irq_bit = 1; |
| do { |
| if (events & irq_bit) { |
| psc_write_byte(pIER, irq_bit); |
| psc_write_byte(pIFR, irq_bit); |
| m68k_handle_int(irq_num); |
| psc_write_byte(pIER, irq_bit | 0x80); |
| } |
| irq_num++; |
| irq_bit <<= 1; |
| } while (events >= irq_bit); |
| return IRQ_HANDLED; |
| } |
| |
| void psc_irq_enable(int irq) { |
| int irq_src = IRQ_SRC(irq); |
| int irq_idx = IRQ_IDX(irq); |
| int pIER = pIERbase + (irq_src << 4); |
| |
| #ifdef DEBUG_IRQUSE |
| printk("psc_irq_enable(%d)\n", irq); |
| #endif |
| psc_write_byte(pIER, (1 << irq_idx) | 0x80); |
| } |
| |
| void psc_irq_disable(int irq) { |
| int irq_src = IRQ_SRC(irq); |
| int irq_idx = IRQ_IDX(irq); |
| int pIER = pIERbase + (irq_src << 4); |
| |
| #ifdef DEBUG_IRQUSE |
| printk("psc_irq_disable(%d)\n", irq); |
| #endif |
| psc_write_byte(pIER, 1 << irq_idx); |
| } |
| |
| void psc_irq_clear(int irq) { |
| int irq_src = IRQ_SRC(irq); |
| int irq_idx = IRQ_IDX(irq); |
| int pIFR = pIERbase + (irq_src << 4); |
| |
| psc_write_byte(pIFR, 1 << irq_idx); |
| } |
| |
| int psc_irq_pending(int irq) |
| { |
| int irq_src = IRQ_SRC(irq); |
| int irq_idx = IRQ_IDX(irq); |
| int pIFR = pIERbase + (irq_src << 4); |
| |
| return psc_read_byte(pIFR) & (1 << irq_idx); |
| } |