| /* |
| * MPC83xx Device descriptions |
| * |
| * Maintainer: Kumar Gala <galak@kernel.crashing.org> |
| * |
| * Copyright 2005 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/serial_8250.h> |
| #include <linux/fsl_devices.h> |
| #include <asm/mpc83xx.h> |
| #include <asm/irq.h> |
| #include <asm/ppc_sys.h> |
| #include <asm/machdep.h> |
| |
| /* We use offsets for IORESOURCE_MEM since we do not know at compile time |
| * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup |
| */ |
| |
| struct gianfar_mdio_data mpc83xx_mdio_pdata = { |
| }; |
| |
| static struct gianfar_platform_data mpc83xx_tsec1_pdata = { |
| .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | |
| FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | |
| FSL_GIANFAR_DEV_HAS_MULTI_INTR, |
| }; |
| |
| static struct gianfar_platform_data mpc83xx_tsec2_pdata = { |
| .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | |
| FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | |
| FSL_GIANFAR_DEV_HAS_MULTI_INTR, |
| }; |
| |
| static struct fsl_i2c_platform_data mpc83xx_fsl_i2c1_pdata = { |
| .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, |
| }; |
| |
| static struct fsl_i2c_platform_data mpc83xx_fsl_i2c2_pdata = { |
| .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, |
| }; |
| |
| static struct plat_serial8250_port serial_platform_data[] = { |
| [0] = { |
| .mapbase = 0x4500, |
| .irq = MPC83xx_IRQ_UART1, |
| .iotype = UPIO_MEM, |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, |
| }, |
| [1] = { |
| .mapbase = 0x4600, |
| .irq = MPC83xx_IRQ_UART2, |
| .iotype = UPIO_MEM, |
| .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, |
| }, |
| { }, |
| }; |
| |
| struct platform_device ppc_sys_platform_devices[] = { |
| [MPC83xx_TSEC1] = { |
| .name = "fsl-gianfar", |
| .id = 1, |
| .dev.platform_data = &mpc83xx_tsec1_pdata, |
| .num_resources = 4, |
| .resource = (struct resource[]) { |
| { |
| .start = 0x24000, |
| .end = 0x24fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .name = "tx", |
| .start = MPC83xx_IRQ_TSEC1_TX, |
| .end = MPC83xx_IRQ_TSEC1_TX, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .name = "rx", |
| .start = MPC83xx_IRQ_TSEC1_RX, |
| .end = MPC83xx_IRQ_TSEC1_RX, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .name = "error", |
| .start = MPC83xx_IRQ_TSEC1_ERROR, |
| .end = MPC83xx_IRQ_TSEC1_ERROR, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }, |
| }, |
| [MPC83xx_TSEC2] = { |
| .name = "fsl-gianfar", |
| .id = 2, |
| .dev.platform_data = &mpc83xx_tsec2_pdata, |
| .num_resources = 4, |
| .resource = (struct resource[]) { |
| { |
| .start = 0x25000, |
| .end = 0x25fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .name = "tx", |
| .start = MPC83xx_IRQ_TSEC2_TX, |
| .end = MPC83xx_IRQ_TSEC2_TX, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .name = "rx", |
| .start = MPC83xx_IRQ_TSEC2_RX, |
| .end = MPC83xx_IRQ_TSEC2_RX, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .name = "error", |
| .start = MPC83xx_IRQ_TSEC2_ERROR, |
| .end = MPC83xx_IRQ_TSEC2_ERROR, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }, |
| }, |
| [MPC83xx_IIC1] = { |
| .name = "fsl-i2c", |
| .id = 1, |
| .dev.platform_data = &mpc83xx_fsl_i2c1_pdata, |
| .num_resources = 2, |
| .resource = (struct resource[]) { |
| { |
| .start = 0x3000, |
| .end = 0x30ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = MPC83xx_IRQ_IIC1, |
| .end = MPC83xx_IRQ_IIC1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }, |
| }, |
| [MPC83xx_IIC2] = { |
| .name = "fsl-i2c", |
| .id = 2, |
| .dev.platform_data = &mpc83xx_fsl_i2c2_pdata, |
| .num_resources = 2, |
| .resource = (struct resource[]) { |
| { |
| .start = 0x3100, |
| .end = 0x31ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = MPC83xx_IRQ_IIC2, |
| .end = MPC83xx_IRQ_IIC2, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }, |
| }, |
| [MPC83xx_DUART] = { |
| .name = "serial8250", |
| .id = PLAT8250_DEV_PLATFORM, |
| .dev.platform_data = serial_platform_data, |
| }, |
| [MPC83xx_SEC2] = { |
| .name = "fsl-sec2", |
| .id = 1, |
| .num_resources = 2, |
| .resource = (struct resource[]) { |
| { |
| .start = 0x30000, |
| .end = 0x3ffff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = MPC83xx_IRQ_SEC2, |
| .end = MPC83xx_IRQ_SEC2, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }, |
| }, |
| [MPC83xx_USB2_DR] = { |
| .name = "fsl-usb2-dr", |
| .id = 1, |
| .num_resources = 2, |
| .resource = (struct resource[]) { |
| { |
| .start = 0x23000, |
| .end = 0x23fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = MPC83xx_IRQ_USB2_DR, |
| .end = MPC83xx_IRQ_USB2_DR, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }, |
| }, |
| [MPC83xx_USB2_MPH] = { |
| .name = "fsl-usb2-mph", |
| .id = 1, |
| .num_resources = 2, |
| .resource = (struct resource[]) { |
| { |
| .start = 0x22000, |
| .end = 0x22fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = MPC83xx_IRQ_USB2_MPH, |
| .end = MPC83xx_IRQ_USB2_MPH, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }, |
| }, |
| [MPC83xx_MDIO] = { |
| .name = "fsl-gianfar_mdio", |
| .id = 0, |
| .dev.platform_data = &mpc83xx_mdio_pdata, |
| .num_resources = 1, |
| .resource = (struct resource[]) { |
| { |
| .start = 0x24520, |
| .end = 0x2453f, |
| .flags = IORESOURCE_MEM, |
| }, |
| }, |
| }, |
| }; |
| |
| static int __init mach_mpc83xx_fixup(struct platform_device *pdev) |
| { |
| ppc_sys_fixup_mem_resource(pdev, immrbar); |
| return 0; |
| } |
| |
| static int __init mach_mpc83xx_init(void) |
| { |
| if (ppc_md.progress) |
| ppc_md.progress("mach_mpc83xx_init:enter", 0); |
| ppc_sys_device_fixup = mach_mpc83xx_fixup; |
| return 0; |
| } |
| |
| postcore_initcall(mach_mpc83xx_init); |