| /* |
| * drivers/net/ethernet/mellanox/mlxsw/reg.h |
| * Copyright (c) 2015-2017 Mellanox Technologies. All rights reserved. |
| * Copyright (c) 2015-2016 Ido Schimmel <idosch@mellanox.com> |
| * Copyright (c) 2015 Elad Raz <eladr@mellanox.com> |
| * Copyright (c) 2015-2017 Jiri Pirko <jiri@mellanox.com> |
| * Copyright (c) 2016 Yotam Gigi <yotamg@mellanox.com> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _MLXSW_REG_H |
| #define _MLXSW_REG_H |
| |
| #include <linux/string.h> |
| #include <linux/bitops.h> |
| #include <linux/if_vlan.h> |
| |
| #include "item.h" |
| #include "port.h" |
| |
| struct mlxsw_reg_info { |
| u16 id; |
| u16 len; /* In u8 */ |
| const char *name; |
| }; |
| |
| #define MLXSW_REG_DEFINE(_name, _id, _len) \ |
| static const struct mlxsw_reg_info mlxsw_reg_##_name = { \ |
| .id = _id, \ |
| .len = _len, \ |
| .name = #_name, \ |
| } |
| |
| #define MLXSW_REG(type) (&mlxsw_reg_##type) |
| #define MLXSW_REG_LEN(type) MLXSW_REG(type)->len |
| #define MLXSW_REG_ZERO(type, payload) memset(payload, 0, MLXSW_REG(type)->len) |
| |
| /* SGCR - Switch General Configuration Register |
| * -------------------------------------------- |
| * This register is used for configuration of the switch capabilities. |
| */ |
| #define MLXSW_REG_SGCR_ID 0x2000 |
| #define MLXSW_REG_SGCR_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(sgcr, MLXSW_REG_SGCR_ID, MLXSW_REG_SGCR_LEN); |
| |
| /* reg_sgcr_llb |
| * Link Local Broadcast (Default=0) |
| * When set, all Link Local packets (224.0.0.X) will be treated as broadcast |
| * packets and ignore the IGMP snooping entries. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sgcr, llb, 0x04, 0, 1); |
| |
| static inline void mlxsw_reg_sgcr_pack(char *payload, bool llb) |
| { |
| MLXSW_REG_ZERO(sgcr, payload); |
| mlxsw_reg_sgcr_llb_set(payload, !!llb); |
| } |
| |
| /* SPAD - Switch Physical Address Register |
| * --------------------------------------- |
| * The SPAD register configures the switch physical MAC address. |
| */ |
| #define MLXSW_REG_SPAD_ID 0x2002 |
| #define MLXSW_REG_SPAD_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(spad, MLXSW_REG_SPAD_ID, MLXSW_REG_SPAD_LEN); |
| |
| /* reg_spad_base_mac |
| * Base MAC address for the switch partitions. |
| * Per switch partition MAC address is equal to: |
| * base_mac + swid |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, spad, base_mac, 0x02, 6); |
| |
| /* SMID - Switch Multicast ID |
| * -------------------------- |
| * The MID record maps from a MID (Multicast ID), which is a unique identifier |
| * of the multicast group within the stacking domain, into a list of local |
| * ports into which the packet is replicated. |
| */ |
| #define MLXSW_REG_SMID_ID 0x2007 |
| #define MLXSW_REG_SMID_LEN 0x240 |
| |
| MLXSW_REG_DEFINE(smid, MLXSW_REG_SMID_ID, MLXSW_REG_SMID_LEN); |
| |
| /* reg_smid_swid |
| * Switch partition ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, smid, swid, 0x00, 24, 8); |
| |
| /* reg_smid_mid |
| * Multicast identifier - global identifier that represents the multicast group |
| * across all devices. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, smid, mid, 0x00, 0, 16); |
| |
| /* reg_smid_port |
| * Local port memebership (1 bit per port). |
| * Access: RW |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, smid, port, 0x20, 0x20, 1); |
| |
| /* reg_smid_port_mask |
| * Local port mask (1 bit per port). |
| * Access: W |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, smid, port_mask, 0x220, 0x20, 1); |
| |
| static inline void mlxsw_reg_smid_pack(char *payload, u16 mid, |
| u8 port, bool set) |
| { |
| MLXSW_REG_ZERO(smid, payload); |
| mlxsw_reg_smid_swid_set(payload, 0); |
| mlxsw_reg_smid_mid_set(payload, mid); |
| mlxsw_reg_smid_port_set(payload, port, set); |
| mlxsw_reg_smid_port_mask_set(payload, port, 1); |
| } |
| |
| /* SSPR - Switch System Port Record Register |
| * ----------------------------------------- |
| * Configures the system port to local port mapping. |
| */ |
| #define MLXSW_REG_SSPR_ID 0x2008 |
| #define MLXSW_REG_SSPR_LEN 0x8 |
| |
| MLXSW_REG_DEFINE(sspr, MLXSW_REG_SSPR_ID, MLXSW_REG_SSPR_LEN); |
| |
| /* reg_sspr_m |
| * Master - if set, then the record describes the master system port. |
| * This is needed in case a local port is mapped into several system ports |
| * (for multipathing). That number will be reported as the source system |
| * port when packets are forwarded to the CPU. Only one master port is allowed |
| * per local port. |
| * |
| * Note: Must be set for Spectrum. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sspr, m, 0x00, 31, 1); |
| |
| /* reg_sspr_local_port |
| * Local port number. |
| * |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sspr, local_port, 0x00, 16, 8); |
| |
| /* reg_sspr_sub_port |
| * Virtual port within the physical port. |
| * Should be set to 0 when virtual ports are not enabled on the port. |
| * |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sspr, sub_port, 0x00, 8, 8); |
| |
| /* reg_sspr_system_port |
| * Unique identifier within the stacking domain that represents all the ports |
| * that are available in the system (external ports). |
| * |
| * Currently, only single-ASIC configurations are supported, so we default to |
| * 1:1 mapping between system ports and local ports. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sspr, system_port, 0x04, 0, 16); |
| |
| static inline void mlxsw_reg_sspr_pack(char *payload, u8 local_port) |
| { |
| MLXSW_REG_ZERO(sspr, payload); |
| mlxsw_reg_sspr_m_set(payload, 1); |
| mlxsw_reg_sspr_local_port_set(payload, local_port); |
| mlxsw_reg_sspr_sub_port_set(payload, 0); |
| mlxsw_reg_sspr_system_port_set(payload, local_port); |
| } |
| |
| /* SFDAT - Switch Filtering Database Aging Time |
| * -------------------------------------------- |
| * Controls the Switch aging time. Aging time is able to be set per Switch |
| * Partition. |
| */ |
| #define MLXSW_REG_SFDAT_ID 0x2009 |
| #define MLXSW_REG_SFDAT_LEN 0x8 |
| |
| MLXSW_REG_DEFINE(sfdat, MLXSW_REG_SFDAT_ID, MLXSW_REG_SFDAT_LEN); |
| |
| /* reg_sfdat_swid |
| * Switch partition ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sfdat, swid, 0x00, 24, 8); |
| |
| /* reg_sfdat_age_time |
| * Aging time in seconds |
| * Min - 10 seconds |
| * Max - 1,000,000 seconds |
| * Default is 300 seconds. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfdat, age_time, 0x04, 0, 20); |
| |
| static inline void mlxsw_reg_sfdat_pack(char *payload, u32 age_time) |
| { |
| MLXSW_REG_ZERO(sfdat, payload); |
| mlxsw_reg_sfdat_swid_set(payload, 0); |
| mlxsw_reg_sfdat_age_time_set(payload, age_time); |
| } |
| |
| /* SFD - Switch Filtering Database |
| * ------------------------------- |
| * The following register defines the access to the filtering database. |
| * The register supports querying, adding, removing and modifying the database. |
| * The access is optimized for bulk updates in which case more than one |
| * FDB record is present in the same command. |
| */ |
| #define MLXSW_REG_SFD_ID 0x200A |
| #define MLXSW_REG_SFD_BASE_LEN 0x10 /* base length, without records */ |
| #define MLXSW_REG_SFD_REC_LEN 0x10 /* record length */ |
| #define MLXSW_REG_SFD_REC_MAX_COUNT 64 |
| #define MLXSW_REG_SFD_LEN (MLXSW_REG_SFD_BASE_LEN + \ |
| MLXSW_REG_SFD_REC_LEN * MLXSW_REG_SFD_REC_MAX_COUNT) |
| |
| MLXSW_REG_DEFINE(sfd, MLXSW_REG_SFD_ID, MLXSW_REG_SFD_LEN); |
| |
| /* reg_sfd_swid |
| * Switch partition ID for queries. Reserved on Write. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sfd, swid, 0x00, 24, 8); |
| |
| enum mlxsw_reg_sfd_op { |
| /* Dump entire FDB a (process according to record_locator) */ |
| MLXSW_REG_SFD_OP_QUERY_DUMP = 0, |
| /* Query records by {MAC, VID/FID} value */ |
| MLXSW_REG_SFD_OP_QUERY_QUERY = 1, |
| /* Query and clear activity. Query records by {MAC, VID/FID} value */ |
| MLXSW_REG_SFD_OP_QUERY_QUERY_AND_CLEAR_ACTIVITY = 2, |
| /* Test. Response indicates if each of the records could be |
| * added to the FDB. |
| */ |
| MLXSW_REG_SFD_OP_WRITE_TEST = 0, |
| /* Add/modify. Aged-out records cannot be added. This command removes |
| * the learning notification of the {MAC, VID/FID}. Response includes |
| * the entries that were added to the FDB. |
| */ |
| MLXSW_REG_SFD_OP_WRITE_EDIT = 1, |
| /* Remove record by {MAC, VID/FID}. This command also removes |
| * the learning notification and aged-out notifications |
| * of the {MAC, VID/FID}. The response provides current (pre-removal) |
| * entries as non-aged-out. |
| */ |
| MLXSW_REG_SFD_OP_WRITE_REMOVE = 2, |
| /* Remove learned notification by {MAC, VID/FID}. The response provides |
| * the removed learning notification. |
| */ |
| MLXSW_REG_SFD_OP_WRITE_REMOVE_NOTIFICATION = 2, |
| }; |
| |
| /* reg_sfd_op |
| * Operation. |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, sfd, op, 0x04, 30, 2); |
| |
| /* reg_sfd_record_locator |
| * Used for querying the FDB. Use record_locator=0 to initiate the |
| * query. When a record is returned, a new record_locator is |
| * returned to be used in the subsequent query. |
| * Reserved for database update. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sfd, record_locator, 0x04, 0, 30); |
| |
| /* reg_sfd_num_rec |
| * Request: Number of records to read/add/modify/remove |
| * Response: Number of records read/added/replaced/removed |
| * See above description for more details. |
| * Ranges 0..64 |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfd, num_rec, 0x08, 0, 8); |
| |
| static inline void mlxsw_reg_sfd_pack(char *payload, enum mlxsw_reg_sfd_op op, |
| u32 record_locator) |
| { |
| MLXSW_REG_ZERO(sfd, payload); |
| mlxsw_reg_sfd_op_set(payload, op); |
| mlxsw_reg_sfd_record_locator_set(payload, record_locator); |
| } |
| |
| /* reg_sfd_rec_swid |
| * Switch partition ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, rec_swid, MLXSW_REG_SFD_BASE_LEN, 24, 8, |
| MLXSW_REG_SFD_REC_LEN, 0x00, false); |
| |
| enum mlxsw_reg_sfd_rec_type { |
| MLXSW_REG_SFD_REC_TYPE_UNICAST = 0x0, |
| MLXSW_REG_SFD_REC_TYPE_UNICAST_LAG = 0x1, |
| MLXSW_REG_SFD_REC_TYPE_MULTICAST = 0x2, |
| }; |
| |
| /* reg_sfd_rec_type |
| * FDB record type. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, rec_type, MLXSW_REG_SFD_BASE_LEN, 20, 4, |
| MLXSW_REG_SFD_REC_LEN, 0x00, false); |
| |
| enum mlxsw_reg_sfd_rec_policy { |
| /* Replacement disabled, aging disabled. */ |
| MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY = 0, |
| /* (mlag remote): Replacement enabled, aging disabled, |
| * learning notification enabled on this port. |
| */ |
| MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_MLAG = 1, |
| /* (ingress device): Replacement enabled, aging enabled. */ |
| MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_INGRESS = 3, |
| }; |
| |
| /* reg_sfd_rec_policy |
| * Policy. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, rec_policy, MLXSW_REG_SFD_BASE_LEN, 18, 2, |
| MLXSW_REG_SFD_REC_LEN, 0x00, false); |
| |
| /* reg_sfd_rec_a |
| * Activity. Set for new static entries. Set for static entries if a frame SMAC |
| * lookup hits on the entry. |
| * To clear the a bit, use "query and clear activity" op. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, rec_a, MLXSW_REG_SFD_BASE_LEN, 16, 1, |
| MLXSW_REG_SFD_REC_LEN, 0x00, false); |
| |
| /* reg_sfd_rec_mac |
| * MAC address. |
| * Access: Index |
| */ |
| MLXSW_ITEM_BUF_INDEXED(reg, sfd, rec_mac, MLXSW_REG_SFD_BASE_LEN, 6, |
| MLXSW_REG_SFD_REC_LEN, 0x02); |
| |
| enum mlxsw_reg_sfd_rec_action { |
| /* forward */ |
| MLXSW_REG_SFD_REC_ACTION_NOP = 0, |
| /* forward and trap, trap_id is FDB_TRAP */ |
| MLXSW_REG_SFD_REC_ACTION_MIRROR_TO_CPU = 1, |
| /* trap and do not forward, trap_id is FDB_TRAP */ |
| MLXSW_REG_SFD_REC_ACTION_TRAP = 2, |
| /* forward to IP router */ |
| MLXSW_REG_SFD_REC_ACTION_FORWARD_IP_ROUTER = 3, |
| MLXSW_REG_SFD_REC_ACTION_DISCARD_ERROR = 15, |
| }; |
| |
| /* reg_sfd_rec_action |
| * Action to apply on the packet. |
| * Note: Dynamic entries can only be configured with NOP action. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, rec_action, MLXSW_REG_SFD_BASE_LEN, 28, 4, |
| MLXSW_REG_SFD_REC_LEN, 0x0C, false); |
| |
| /* reg_sfd_uc_sub_port |
| * VEPA channel on local port. |
| * Valid only if local port is a non-stacking port. Must be 0 if multichannel |
| * VEPA is not enabled. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, uc_sub_port, MLXSW_REG_SFD_BASE_LEN, 16, 8, |
| MLXSW_REG_SFD_REC_LEN, 0x08, false); |
| |
| /* reg_sfd_uc_fid_vid |
| * Filtering ID or VLAN ID |
| * For SwitchX and SwitchX-2: |
| * - Dynamic entries (policy 2,3) use FID |
| * - Static entries (policy 0) use VID |
| * - When independent learning is configured, VID=FID |
| * For Spectrum: use FID for both Dynamic and Static entries. |
| * VID should not be used. |
| * Access: Index |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, uc_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16, |
| MLXSW_REG_SFD_REC_LEN, 0x08, false); |
| |
| /* reg_sfd_uc_system_port |
| * Unique port identifier for the final destination of the packet. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, uc_system_port, MLXSW_REG_SFD_BASE_LEN, 0, 16, |
| MLXSW_REG_SFD_REC_LEN, 0x0C, false); |
| |
| static inline void mlxsw_reg_sfd_rec_pack(char *payload, int rec_index, |
| enum mlxsw_reg_sfd_rec_type rec_type, |
| const char *mac, |
| enum mlxsw_reg_sfd_rec_action action) |
| { |
| u8 num_rec = mlxsw_reg_sfd_num_rec_get(payload); |
| |
| if (rec_index >= num_rec) |
| mlxsw_reg_sfd_num_rec_set(payload, rec_index + 1); |
| mlxsw_reg_sfd_rec_swid_set(payload, rec_index, 0); |
| mlxsw_reg_sfd_rec_type_set(payload, rec_index, rec_type); |
| mlxsw_reg_sfd_rec_mac_memcpy_to(payload, rec_index, mac); |
| mlxsw_reg_sfd_rec_action_set(payload, rec_index, action); |
| } |
| |
| static inline void mlxsw_reg_sfd_uc_pack(char *payload, int rec_index, |
| enum mlxsw_reg_sfd_rec_policy policy, |
| const char *mac, u16 fid_vid, |
| enum mlxsw_reg_sfd_rec_action action, |
| u8 local_port) |
| { |
| mlxsw_reg_sfd_rec_pack(payload, rec_index, |
| MLXSW_REG_SFD_REC_TYPE_UNICAST, mac, action); |
| mlxsw_reg_sfd_rec_policy_set(payload, rec_index, policy); |
| mlxsw_reg_sfd_uc_sub_port_set(payload, rec_index, 0); |
| mlxsw_reg_sfd_uc_fid_vid_set(payload, rec_index, fid_vid); |
| mlxsw_reg_sfd_uc_system_port_set(payload, rec_index, local_port); |
| } |
| |
| static inline void mlxsw_reg_sfd_uc_unpack(char *payload, int rec_index, |
| char *mac, u16 *p_fid_vid, |
| u8 *p_local_port) |
| { |
| mlxsw_reg_sfd_rec_mac_memcpy_from(payload, rec_index, mac); |
| *p_fid_vid = mlxsw_reg_sfd_uc_fid_vid_get(payload, rec_index); |
| *p_local_port = mlxsw_reg_sfd_uc_system_port_get(payload, rec_index); |
| } |
| |
| /* reg_sfd_uc_lag_sub_port |
| * LAG sub port. |
| * Must be 0 if multichannel VEPA is not enabled. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_sub_port, MLXSW_REG_SFD_BASE_LEN, 16, 8, |
| MLXSW_REG_SFD_REC_LEN, 0x08, false); |
| |
| /* reg_sfd_uc_lag_fid_vid |
| * Filtering ID or VLAN ID |
| * For SwitchX and SwitchX-2: |
| * - Dynamic entries (policy 2,3) use FID |
| * - Static entries (policy 0) use VID |
| * - When independent learning is configured, VID=FID |
| * For Spectrum: use FID for both Dynamic and Static entries. |
| * VID should not be used. |
| * Access: Index |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16, |
| MLXSW_REG_SFD_REC_LEN, 0x08, false); |
| |
| /* reg_sfd_uc_lag_lag_vid |
| * Indicates VID in case of vFIDs. Reserved for FIDs. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_lag_vid, MLXSW_REG_SFD_BASE_LEN, 16, 12, |
| MLXSW_REG_SFD_REC_LEN, 0x0C, false); |
| |
| /* reg_sfd_uc_lag_lag_id |
| * LAG Identifier - pointer into the LAG descriptor table. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_lag_id, MLXSW_REG_SFD_BASE_LEN, 0, 10, |
| MLXSW_REG_SFD_REC_LEN, 0x0C, false); |
| |
| static inline void |
| mlxsw_reg_sfd_uc_lag_pack(char *payload, int rec_index, |
| enum mlxsw_reg_sfd_rec_policy policy, |
| const char *mac, u16 fid_vid, |
| enum mlxsw_reg_sfd_rec_action action, u16 lag_vid, |
| u16 lag_id) |
| { |
| mlxsw_reg_sfd_rec_pack(payload, rec_index, |
| MLXSW_REG_SFD_REC_TYPE_UNICAST_LAG, |
| mac, action); |
| mlxsw_reg_sfd_rec_policy_set(payload, rec_index, policy); |
| mlxsw_reg_sfd_uc_lag_sub_port_set(payload, rec_index, 0); |
| mlxsw_reg_sfd_uc_lag_fid_vid_set(payload, rec_index, fid_vid); |
| mlxsw_reg_sfd_uc_lag_lag_vid_set(payload, rec_index, lag_vid); |
| mlxsw_reg_sfd_uc_lag_lag_id_set(payload, rec_index, lag_id); |
| } |
| |
| static inline void mlxsw_reg_sfd_uc_lag_unpack(char *payload, int rec_index, |
| char *mac, u16 *p_vid, |
| u16 *p_lag_id) |
| { |
| mlxsw_reg_sfd_rec_mac_memcpy_from(payload, rec_index, mac); |
| *p_vid = mlxsw_reg_sfd_uc_lag_fid_vid_get(payload, rec_index); |
| *p_lag_id = mlxsw_reg_sfd_uc_lag_lag_id_get(payload, rec_index); |
| } |
| |
| /* reg_sfd_mc_pgi |
| * |
| * Multicast port group index - index into the port group table. |
| * Value 0x1FFF indicates the pgi should point to the MID entry. |
| * For Spectrum this value must be set to 0x1FFF |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, mc_pgi, MLXSW_REG_SFD_BASE_LEN, 16, 13, |
| MLXSW_REG_SFD_REC_LEN, 0x08, false); |
| |
| /* reg_sfd_mc_fid_vid |
| * |
| * Filtering ID or VLAN ID |
| * Access: Index |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, mc_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16, |
| MLXSW_REG_SFD_REC_LEN, 0x08, false); |
| |
| /* reg_sfd_mc_mid |
| * |
| * Multicast identifier - global identifier that represents the multicast |
| * group across all devices. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfd, mc_mid, MLXSW_REG_SFD_BASE_LEN, 0, 16, |
| MLXSW_REG_SFD_REC_LEN, 0x0C, false); |
| |
| static inline void |
| mlxsw_reg_sfd_mc_pack(char *payload, int rec_index, |
| const char *mac, u16 fid_vid, |
| enum mlxsw_reg_sfd_rec_action action, u16 mid) |
| { |
| mlxsw_reg_sfd_rec_pack(payload, rec_index, |
| MLXSW_REG_SFD_REC_TYPE_MULTICAST, mac, action); |
| mlxsw_reg_sfd_mc_pgi_set(payload, rec_index, 0x1FFF); |
| mlxsw_reg_sfd_mc_fid_vid_set(payload, rec_index, fid_vid); |
| mlxsw_reg_sfd_mc_mid_set(payload, rec_index, mid); |
| } |
| |
| /* SFN - Switch FDB Notification Register |
| * ------------------------------------------- |
| * The switch provides notifications on newly learned FDB entries and |
| * aged out entries. The notifications can be polled by software. |
| */ |
| #define MLXSW_REG_SFN_ID 0x200B |
| #define MLXSW_REG_SFN_BASE_LEN 0x10 /* base length, without records */ |
| #define MLXSW_REG_SFN_REC_LEN 0x10 /* record length */ |
| #define MLXSW_REG_SFN_REC_MAX_COUNT 64 |
| #define MLXSW_REG_SFN_LEN (MLXSW_REG_SFN_BASE_LEN + \ |
| MLXSW_REG_SFN_REC_LEN * MLXSW_REG_SFN_REC_MAX_COUNT) |
| |
| MLXSW_REG_DEFINE(sfn, MLXSW_REG_SFN_ID, MLXSW_REG_SFN_LEN); |
| |
| /* reg_sfn_swid |
| * Switch partition ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sfn, swid, 0x00, 24, 8); |
| |
| /* reg_sfn_end |
| * Forces the current session to end. |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, sfn, end, 0x04, 20, 1); |
| |
| /* reg_sfn_num_rec |
| * Request: Number of learned notifications and aged-out notification |
| * records requested. |
| * Response: Number of notification records returned (must be smaller |
| * than or equal to the value requested) |
| * Ranges 0..64 |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, sfn, num_rec, 0x04, 0, 8); |
| |
| static inline void mlxsw_reg_sfn_pack(char *payload) |
| { |
| MLXSW_REG_ZERO(sfn, payload); |
| mlxsw_reg_sfn_swid_set(payload, 0); |
| mlxsw_reg_sfn_end_set(payload, 1); |
| mlxsw_reg_sfn_num_rec_set(payload, MLXSW_REG_SFN_REC_MAX_COUNT); |
| } |
| |
| /* reg_sfn_rec_swid |
| * Switch partition ID. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfn, rec_swid, MLXSW_REG_SFN_BASE_LEN, 24, 8, |
| MLXSW_REG_SFN_REC_LEN, 0x00, false); |
| |
| enum mlxsw_reg_sfn_rec_type { |
| /* MAC addresses learned on a regular port. */ |
| MLXSW_REG_SFN_REC_TYPE_LEARNED_MAC = 0x5, |
| /* MAC addresses learned on a LAG port. */ |
| MLXSW_REG_SFN_REC_TYPE_LEARNED_MAC_LAG = 0x6, |
| /* Aged-out MAC address on a regular port. */ |
| MLXSW_REG_SFN_REC_TYPE_AGED_OUT_MAC = 0x7, |
| /* Aged-out MAC address on a LAG port. */ |
| MLXSW_REG_SFN_REC_TYPE_AGED_OUT_MAC_LAG = 0x8, |
| }; |
| |
| /* reg_sfn_rec_type |
| * Notification record type. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfn, rec_type, MLXSW_REG_SFN_BASE_LEN, 20, 4, |
| MLXSW_REG_SFN_REC_LEN, 0x00, false); |
| |
| /* reg_sfn_rec_mac |
| * MAC address. |
| * Access: RO |
| */ |
| MLXSW_ITEM_BUF_INDEXED(reg, sfn, rec_mac, MLXSW_REG_SFN_BASE_LEN, 6, |
| MLXSW_REG_SFN_REC_LEN, 0x02); |
| |
| /* reg_sfn_mac_sub_port |
| * VEPA channel on the local port. |
| * 0 if multichannel VEPA is not enabled. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfn, mac_sub_port, MLXSW_REG_SFN_BASE_LEN, 16, 8, |
| MLXSW_REG_SFN_REC_LEN, 0x08, false); |
| |
| /* reg_sfn_mac_fid |
| * Filtering identifier. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfn, mac_fid, MLXSW_REG_SFN_BASE_LEN, 0, 16, |
| MLXSW_REG_SFN_REC_LEN, 0x08, false); |
| |
| /* reg_sfn_mac_system_port |
| * Unique port identifier for the final destination of the packet. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfn, mac_system_port, MLXSW_REG_SFN_BASE_LEN, 0, 16, |
| MLXSW_REG_SFN_REC_LEN, 0x0C, false); |
| |
| static inline void mlxsw_reg_sfn_mac_unpack(char *payload, int rec_index, |
| char *mac, u16 *p_vid, |
| u8 *p_local_port) |
| { |
| mlxsw_reg_sfn_rec_mac_memcpy_from(payload, rec_index, mac); |
| *p_vid = mlxsw_reg_sfn_mac_fid_get(payload, rec_index); |
| *p_local_port = mlxsw_reg_sfn_mac_system_port_get(payload, rec_index); |
| } |
| |
| /* reg_sfn_mac_lag_lag_id |
| * LAG ID (pointer into the LAG descriptor table). |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sfn, mac_lag_lag_id, MLXSW_REG_SFN_BASE_LEN, 0, 10, |
| MLXSW_REG_SFN_REC_LEN, 0x0C, false); |
| |
| static inline void mlxsw_reg_sfn_mac_lag_unpack(char *payload, int rec_index, |
| char *mac, u16 *p_vid, |
| u16 *p_lag_id) |
| { |
| mlxsw_reg_sfn_rec_mac_memcpy_from(payload, rec_index, mac); |
| *p_vid = mlxsw_reg_sfn_mac_fid_get(payload, rec_index); |
| *p_lag_id = mlxsw_reg_sfn_mac_lag_lag_id_get(payload, rec_index); |
| } |
| |
| /* SPMS - Switch Port MSTP/RSTP State Register |
| * ------------------------------------------- |
| * Configures the spanning tree state of a physical port. |
| */ |
| #define MLXSW_REG_SPMS_ID 0x200D |
| #define MLXSW_REG_SPMS_LEN 0x404 |
| |
| MLXSW_REG_DEFINE(spms, MLXSW_REG_SPMS_ID, MLXSW_REG_SPMS_LEN); |
| |
| /* reg_spms_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, spms, local_port, 0x00, 16, 8); |
| |
| enum mlxsw_reg_spms_state { |
| MLXSW_REG_SPMS_STATE_NO_CHANGE, |
| MLXSW_REG_SPMS_STATE_DISCARDING, |
| MLXSW_REG_SPMS_STATE_LEARNING, |
| MLXSW_REG_SPMS_STATE_FORWARDING, |
| }; |
| |
| /* reg_spms_state |
| * Spanning tree state of each VLAN ID (VID) of the local port. |
| * 0 - Do not change spanning tree state (used only when writing). |
| * 1 - Discarding. No learning or forwarding to/from this port (default). |
| * 2 - Learning. Port is learning, but not forwarding. |
| * 3 - Forwarding. Port is learning and forwarding. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, spms, state, 0x04, 0x400, 2); |
| |
| static inline void mlxsw_reg_spms_pack(char *payload, u8 local_port) |
| { |
| MLXSW_REG_ZERO(spms, payload); |
| mlxsw_reg_spms_local_port_set(payload, local_port); |
| } |
| |
| static inline void mlxsw_reg_spms_vid_pack(char *payload, u16 vid, |
| enum mlxsw_reg_spms_state state) |
| { |
| mlxsw_reg_spms_state_set(payload, vid, state); |
| } |
| |
| /* SPVID - Switch Port VID |
| * ----------------------- |
| * The switch port VID configures the default VID for a port. |
| */ |
| #define MLXSW_REG_SPVID_ID 0x200E |
| #define MLXSW_REG_SPVID_LEN 0x08 |
| |
| MLXSW_REG_DEFINE(spvid, MLXSW_REG_SPVID_ID, MLXSW_REG_SPVID_LEN); |
| |
| /* reg_spvid_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8); |
| |
| /* reg_spvid_sub_port |
| * Virtual port within the physical port. |
| * Should be set to 0 when virtual ports are not enabled on the port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8); |
| |
| /* reg_spvid_pvid |
| * Port default VID |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, spvid, pvid, 0x04, 0, 12); |
| |
| static inline void mlxsw_reg_spvid_pack(char *payload, u8 local_port, u16 pvid) |
| { |
| MLXSW_REG_ZERO(spvid, payload); |
| mlxsw_reg_spvid_local_port_set(payload, local_port); |
| mlxsw_reg_spvid_pvid_set(payload, pvid); |
| } |
| |
| /* SPVM - Switch Port VLAN Membership |
| * ---------------------------------- |
| * The Switch Port VLAN Membership register configures the VLAN membership |
| * of a port in a VLAN denoted by VID. VLAN membership is managed per |
| * virtual port. The register can be used to add and remove VID(s) from a port. |
| */ |
| #define MLXSW_REG_SPVM_ID 0x200F |
| #define MLXSW_REG_SPVM_BASE_LEN 0x04 /* base length, without records */ |
| #define MLXSW_REG_SPVM_REC_LEN 0x04 /* record length */ |
| #define MLXSW_REG_SPVM_REC_MAX_COUNT 256 |
| #define MLXSW_REG_SPVM_LEN (MLXSW_REG_SPVM_BASE_LEN + \ |
| MLXSW_REG_SPVM_REC_LEN * MLXSW_REG_SPVM_REC_MAX_COUNT) |
| |
| MLXSW_REG_DEFINE(spvm, MLXSW_REG_SPVM_ID, MLXSW_REG_SPVM_LEN); |
| |
| /* reg_spvm_pt |
| * Priority tagged. If this bit is set, packets forwarded to the port with |
| * untagged VLAN membership (u bit is set) will be tagged with priority tag |
| * (VID=0) |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, spvm, pt, 0x00, 31, 1); |
| |
| /* reg_spvm_pte |
| * Priority Tagged Update Enable. On Write operations, if this bit is cleared, |
| * the pt bit will NOT be updated. To update the pt bit, pte must be set. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, spvm, pte, 0x00, 30, 1); |
| |
| /* reg_spvm_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, spvm, local_port, 0x00, 16, 8); |
| |
| /* reg_spvm_sub_port |
| * Virtual port within the physical port. |
| * Should be set to 0 when virtual ports are not enabled on the port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, spvm, sub_port, 0x00, 8, 8); |
| |
| /* reg_spvm_num_rec |
| * Number of records to update. Each record contains: i, e, u, vid. |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, spvm, num_rec, 0x00, 0, 8); |
| |
| /* reg_spvm_rec_i |
| * Ingress membership in VLAN ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32_INDEXED(reg, spvm, rec_i, |
| MLXSW_REG_SPVM_BASE_LEN, 14, 1, |
| MLXSW_REG_SPVM_REC_LEN, 0, false); |
| |
| /* reg_spvm_rec_e |
| * Egress membership in VLAN ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32_INDEXED(reg, spvm, rec_e, |
| MLXSW_REG_SPVM_BASE_LEN, 13, 1, |
| MLXSW_REG_SPVM_REC_LEN, 0, false); |
| |
| /* reg_spvm_rec_u |
| * Untagged - port is an untagged member - egress transmission uses untagged |
| * frames on VID<n> |
| * Access: Index |
| */ |
| MLXSW_ITEM32_INDEXED(reg, spvm, rec_u, |
| MLXSW_REG_SPVM_BASE_LEN, 12, 1, |
| MLXSW_REG_SPVM_REC_LEN, 0, false); |
| |
| /* reg_spvm_rec_vid |
| * Egress membership in VLAN ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32_INDEXED(reg, spvm, rec_vid, |
| MLXSW_REG_SPVM_BASE_LEN, 0, 12, |
| MLXSW_REG_SPVM_REC_LEN, 0, false); |
| |
| static inline void mlxsw_reg_spvm_pack(char *payload, u8 local_port, |
| u16 vid_begin, u16 vid_end, |
| bool is_member, bool untagged) |
| { |
| int size = vid_end - vid_begin + 1; |
| int i; |
| |
| MLXSW_REG_ZERO(spvm, payload); |
| mlxsw_reg_spvm_local_port_set(payload, local_port); |
| mlxsw_reg_spvm_num_rec_set(payload, size); |
| |
| for (i = 0; i < size; i++) { |
| mlxsw_reg_spvm_rec_i_set(payload, i, is_member); |
| mlxsw_reg_spvm_rec_e_set(payload, i, is_member); |
| mlxsw_reg_spvm_rec_u_set(payload, i, untagged); |
| mlxsw_reg_spvm_rec_vid_set(payload, i, vid_begin + i); |
| } |
| } |
| |
| /* SPAFT - Switch Port Acceptable Frame Types |
| * ------------------------------------------ |
| * The Switch Port Acceptable Frame Types register configures the frame |
| * admittance of the port. |
| */ |
| #define MLXSW_REG_SPAFT_ID 0x2010 |
| #define MLXSW_REG_SPAFT_LEN 0x08 |
| |
| MLXSW_REG_DEFINE(spaft, MLXSW_REG_SPAFT_ID, MLXSW_REG_SPAFT_LEN); |
| |
| /* reg_spaft_local_port |
| * Local port number. |
| * Access: Index |
| * |
| * Note: CPU port is not supported (all tag types are allowed). |
| */ |
| MLXSW_ITEM32(reg, spaft, local_port, 0x00, 16, 8); |
| |
| /* reg_spaft_sub_port |
| * Virtual port within the physical port. |
| * Should be set to 0 when virtual ports are not enabled on the port. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, spaft, sub_port, 0x00, 8, 8); |
| |
| /* reg_spaft_allow_untagged |
| * When set, untagged frames on the ingress are allowed (default). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, spaft, allow_untagged, 0x04, 31, 1); |
| |
| /* reg_spaft_allow_prio_tagged |
| * When set, priority tagged frames on the ingress are allowed (default). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, spaft, allow_prio_tagged, 0x04, 30, 1); |
| |
| /* reg_spaft_allow_tagged |
| * When set, tagged frames on the ingress are allowed (default). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, spaft, allow_tagged, 0x04, 29, 1); |
| |
| static inline void mlxsw_reg_spaft_pack(char *payload, u8 local_port, |
| bool allow_untagged) |
| { |
| MLXSW_REG_ZERO(spaft, payload); |
| mlxsw_reg_spaft_local_port_set(payload, local_port); |
| mlxsw_reg_spaft_allow_untagged_set(payload, allow_untagged); |
| mlxsw_reg_spaft_allow_prio_tagged_set(payload, true); |
| mlxsw_reg_spaft_allow_tagged_set(payload, true); |
| } |
| |
| /* SFGC - Switch Flooding Group Configuration |
| * ------------------------------------------ |
| * The following register controls the association of flooding tables and MIDs |
| * to packet types used for flooding. |
| */ |
| #define MLXSW_REG_SFGC_ID 0x2011 |
| #define MLXSW_REG_SFGC_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(sfgc, MLXSW_REG_SFGC_ID, MLXSW_REG_SFGC_LEN); |
| |
| enum mlxsw_reg_sfgc_type { |
| MLXSW_REG_SFGC_TYPE_BROADCAST, |
| MLXSW_REG_SFGC_TYPE_UNKNOWN_UNICAST, |
| MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV4, |
| MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV6, |
| MLXSW_REG_SFGC_TYPE_RESERVED, |
| MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_NON_IP, |
| MLXSW_REG_SFGC_TYPE_IPV4_LINK_LOCAL, |
| MLXSW_REG_SFGC_TYPE_IPV6_ALL_HOST, |
| MLXSW_REG_SFGC_TYPE_MAX, |
| }; |
| |
| /* reg_sfgc_type |
| * The traffic type to reach the flooding table. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sfgc, type, 0x00, 0, 4); |
| |
| enum mlxsw_reg_sfgc_bridge_type { |
| MLXSW_REG_SFGC_BRIDGE_TYPE_1Q_FID = 0, |
| MLXSW_REG_SFGC_BRIDGE_TYPE_VFID = 1, |
| }; |
| |
| /* reg_sfgc_bridge_type |
| * Access: Index |
| * |
| * Note: SwitchX-2 only supports 802.1Q mode. |
| */ |
| MLXSW_ITEM32(reg, sfgc, bridge_type, 0x04, 24, 3); |
| |
| enum mlxsw_flood_table_type { |
| MLXSW_REG_SFGC_TABLE_TYPE_VID = 1, |
| MLXSW_REG_SFGC_TABLE_TYPE_SINGLE = 2, |
| MLXSW_REG_SFGC_TABLE_TYPE_ANY = 0, |
| MLXSW_REG_SFGC_TABLE_TYPE_FID_OFFEST = 3, |
| MLXSW_REG_SFGC_TABLE_TYPE_FID = 4, |
| }; |
| |
| /* reg_sfgc_table_type |
| * See mlxsw_flood_table_type |
| * Access: RW |
| * |
| * Note: FID offset and FID types are not supported in SwitchX-2. |
| */ |
| MLXSW_ITEM32(reg, sfgc, table_type, 0x04, 16, 3); |
| |
| /* reg_sfgc_flood_table |
| * Flooding table index to associate with the specific type on the specific |
| * switch partition. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfgc, flood_table, 0x04, 0, 6); |
| |
| /* reg_sfgc_mid |
| * The multicast ID for the swid. Not supported for Spectrum |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfgc, mid, 0x08, 0, 16); |
| |
| /* reg_sfgc_counter_set_type |
| * Counter Set Type for flow counters. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfgc, counter_set_type, 0x0C, 24, 8); |
| |
| /* reg_sfgc_counter_index |
| * Counter Index for flow counters. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfgc, counter_index, 0x0C, 0, 24); |
| |
| static inline void |
| mlxsw_reg_sfgc_pack(char *payload, enum mlxsw_reg_sfgc_type type, |
| enum mlxsw_reg_sfgc_bridge_type bridge_type, |
| enum mlxsw_flood_table_type table_type, |
| unsigned int flood_table) |
| { |
| MLXSW_REG_ZERO(sfgc, payload); |
| mlxsw_reg_sfgc_type_set(payload, type); |
| mlxsw_reg_sfgc_bridge_type_set(payload, bridge_type); |
| mlxsw_reg_sfgc_table_type_set(payload, table_type); |
| mlxsw_reg_sfgc_flood_table_set(payload, flood_table); |
| mlxsw_reg_sfgc_mid_set(payload, MLXSW_PORT_MID); |
| } |
| |
| /* SFTR - Switch Flooding Table Register |
| * ------------------------------------- |
| * The switch flooding table is used for flooding packet replication. The table |
| * defines a bit mask of ports for packet replication. |
| */ |
| #define MLXSW_REG_SFTR_ID 0x2012 |
| #define MLXSW_REG_SFTR_LEN 0x420 |
| |
| MLXSW_REG_DEFINE(sftr, MLXSW_REG_SFTR_ID, MLXSW_REG_SFTR_LEN); |
| |
| /* reg_sftr_swid |
| * Switch partition ID with which to associate the port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sftr, swid, 0x00, 24, 8); |
| |
| /* reg_sftr_flood_table |
| * Flooding table index to associate with the specific type on the specific |
| * switch partition. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sftr, flood_table, 0x00, 16, 6); |
| |
| /* reg_sftr_index |
| * Index. Used as an index into the Flooding Table in case the table is |
| * configured to use VID / FID or FID Offset. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sftr, index, 0x00, 0, 16); |
| |
| /* reg_sftr_table_type |
| * See mlxsw_flood_table_type |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sftr, table_type, 0x04, 16, 3); |
| |
| /* reg_sftr_range |
| * Range of entries to update |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sftr, range, 0x04, 0, 16); |
| |
| /* reg_sftr_port |
| * Local port membership (1 bit per port). |
| * Access: RW |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, sftr, port, 0x20, 0x20, 1); |
| |
| /* reg_sftr_cpu_port_mask |
| * CPU port mask (1 bit per port). |
| * Access: W |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, sftr, port_mask, 0x220, 0x20, 1); |
| |
| static inline void mlxsw_reg_sftr_pack(char *payload, |
| unsigned int flood_table, |
| unsigned int index, |
| enum mlxsw_flood_table_type table_type, |
| unsigned int range, u8 port, bool set) |
| { |
| MLXSW_REG_ZERO(sftr, payload); |
| mlxsw_reg_sftr_swid_set(payload, 0); |
| mlxsw_reg_sftr_flood_table_set(payload, flood_table); |
| mlxsw_reg_sftr_index_set(payload, index); |
| mlxsw_reg_sftr_table_type_set(payload, table_type); |
| mlxsw_reg_sftr_range_set(payload, range); |
| mlxsw_reg_sftr_port_set(payload, port, set); |
| mlxsw_reg_sftr_port_mask_set(payload, port, 1); |
| } |
| |
| /* SFDF - Switch Filtering DB Flush |
| * -------------------------------- |
| * The switch filtering DB flush register is used to flush the FDB. |
| * Note that FDB notifications are flushed as well. |
| */ |
| #define MLXSW_REG_SFDF_ID 0x2013 |
| #define MLXSW_REG_SFDF_LEN 0x14 |
| |
| MLXSW_REG_DEFINE(sfdf, MLXSW_REG_SFDF_ID, MLXSW_REG_SFDF_LEN); |
| |
| /* reg_sfdf_swid |
| * Switch partition ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sfdf, swid, 0x00, 24, 8); |
| |
| enum mlxsw_reg_sfdf_flush_type { |
| MLXSW_REG_SFDF_FLUSH_PER_SWID, |
| MLXSW_REG_SFDF_FLUSH_PER_FID, |
| MLXSW_REG_SFDF_FLUSH_PER_PORT, |
| MLXSW_REG_SFDF_FLUSH_PER_PORT_AND_FID, |
| MLXSW_REG_SFDF_FLUSH_PER_LAG, |
| MLXSW_REG_SFDF_FLUSH_PER_LAG_AND_FID, |
| }; |
| |
| /* reg_sfdf_flush_type |
| * Flush type. |
| * 0 - All SWID dynamic entries are flushed. |
| * 1 - All FID dynamic entries are flushed. |
| * 2 - All dynamic entries pointing to port are flushed. |
| * 3 - All FID dynamic entries pointing to port are flushed. |
| * 4 - All dynamic entries pointing to LAG are flushed. |
| * 5 - All FID dynamic entries pointing to LAG are flushed. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfdf, flush_type, 0x04, 28, 4); |
| |
| /* reg_sfdf_flush_static |
| * Static. |
| * 0 - Flush only dynamic entries. |
| * 1 - Flush both dynamic and static entries. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfdf, flush_static, 0x04, 24, 1); |
| |
| static inline void mlxsw_reg_sfdf_pack(char *payload, |
| enum mlxsw_reg_sfdf_flush_type type) |
| { |
| MLXSW_REG_ZERO(sfdf, payload); |
| mlxsw_reg_sfdf_flush_type_set(payload, type); |
| mlxsw_reg_sfdf_flush_static_set(payload, true); |
| } |
| |
| /* reg_sfdf_fid |
| * FID to flush. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfdf, fid, 0x0C, 0, 16); |
| |
| /* reg_sfdf_system_port |
| * Port to flush. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfdf, system_port, 0x0C, 0, 16); |
| |
| /* reg_sfdf_port_fid_system_port |
| * Port to flush, pointed to by FID. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfdf, port_fid_system_port, 0x08, 0, 16); |
| |
| /* reg_sfdf_lag_id |
| * LAG ID to flush. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfdf, lag_id, 0x0C, 0, 10); |
| |
| /* reg_sfdf_lag_fid_lag_id |
| * LAG ID to flush, pointed to by FID. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfdf, lag_fid_lag_id, 0x08, 0, 10); |
| |
| /* SLDR - Switch LAG Descriptor Register |
| * ----------------------------------------- |
| * The switch LAG descriptor register is populated by LAG descriptors. |
| * Each LAG descriptor is indexed by lag_id. The LAG ID runs from 0 to |
| * max_lag-1. |
| */ |
| #define MLXSW_REG_SLDR_ID 0x2014 |
| #define MLXSW_REG_SLDR_LEN 0x0C /* counting in only one port in list */ |
| |
| MLXSW_REG_DEFINE(sldr, MLXSW_REG_SLDR_ID, MLXSW_REG_SLDR_LEN); |
| |
| enum mlxsw_reg_sldr_op { |
| /* Indicates a creation of a new LAG-ID, lag_id must be valid */ |
| MLXSW_REG_SLDR_OP_LAG_CREATE, |
| MLXSW_REG_SLDR_OP_LAG_DESTROY, |
| /* Ports that appear in the list have the Distributor enabled */ |
| MLXSW_REG_SLDR_OP_LAG_ADD_PORT_LIST, |
| /* Removes ports from the disributor list */ |
| MLXSW_REG_SLDR_OP_LAG_REMOVE_PORT_LIST, |
| }; |
| |
| /* reg_sldr_op |
| * Operation. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sldr, op, 0x00, 29, 3); |
| |
| /* reg_sldr_lag_id |
| * LAG identifier. The lag_id is the index into the LAG descriptor table. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sldr, lag_id, 0x00, 0, 10); |
| |
| static inline void mlxsw_reg_sldr_lag_create_pack(char *payload, u8 lag_id) |
| { |
| MLXSW_REG_ZERO(sldr, payload); |
| mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_CREATE); |
| mlxsw_reg_sldr_lag_id_set(payload, lag_id); |
| } |
| |
| static inline void mlxsw_reg_sldr_lag_destroy_pack(char *payload, u8 lag_id) |
| { |
| MLXSW_REG_ZERO(sldr, payload); |
| mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_DESTROY); |
| mlxsw_reg_sldr_lag_id_set(payload, lag_id); |
| } |
| |
| /* reg_sldr_num_ports |
| * The number of member ports of the LAG. |
| * Reserved for Create / Destroy operations |
| * For Add / Remove operations - indicates the number of ports in the list. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sldr, num_ports, 0x04, 24, 8); |
| |
| /* reg_sldr_system_port |
| * System port. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sldr, system_port, 0x08, 0, 16, 4, 0, false); |
| |
| static inline void mlxsw_reg_sldr_lag_add_port_pack(char *payload, u8 lag_id, |
| u8 local_port) |
| { |
| MLXSW_REG_ZERO(sldr, payload); |
| mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_ADD_PORT_LIST); |
| mlxsw_reg_sldr_lag_id_set(payload, lag_id); |
| mlxsw_reg_sldr_num_ports_set(payload, 1); |
| mlxsw_reg_sldr_system_port_set(payload, 0, local_port); |
| } |
| |
| static inline void mlxsw_reg_sldr_lag_remove_port_pack(char *payload, u8 lag_id, |
| u8 local_port) |
| { |
| MLXSW_REG_ZERO(sldr, payload); |
| mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_REMOVE_PORT_LIST); |
| mlxsw_reg_sldr_lag_id_set(payload, lag_id); |
| mlxsw_reg_sldr_num_ports_set(payload, 1); |
| mlxsw_reg_sldr_system_port_set(payload, 0, local_port); |
| } |
| |
| /* SLCR - Switch LAG Configuration 2 Register |
| * ------------------------------------------- |
| * The Switch LAG Configuration register is used for configuring the |
| * LAG properties of the switch. |
| */ |
| #define MLXSW_REG_SLCR_ID 0x2015 |
| #define MLXSW_REG_SLCR_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(slcr, MLXSW_REG_SLCR_ID, MLXSW_REG_SLCR_LEN); |
| |
| enum mlxsw_reg_slcr_pp { |
| /* Global Configuration (for all ports) */ |
| MLXSW_REG_SLCR_PP_GLOBAL, |
| /* Per port configuration, based on local_port field */ |
| MLXSW_REG_SLCR_PP_PER_PORT, |
| }; |
| |
| /* reg_slcr_pp |
| * Per Port Configuration |
| * Note: Reading at Global mode results in reading port 1 configuration. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, slcr, pp, 0x00, 24, 1); |
| |
| /* reg_slcr_local_port |
| * Local port number |
| * Supported from CPU port |
| * Not supported from router port |
| * Reserved when pp = Global Configuration |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, slcr, local_port, 0x00, 16, 8); |
| |
| enum mlxsw_reg_slcr_type { |
| MLXSW_REG_SLCR_TYPE_CRC, /* default */ |
| MLXSW_REG_SLCR_TYPE_XOR, |
| MLXSW_REG_SLCR_TYPE_RANDOM, |
| }; |
| |
| /* reg_slcr_type |
| * Hash type |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, slcr, type, 0x00, 0, 4); |
| |
| /* Ingress port */ |
| #define MLXSW_REG_SLCR_LAG_HASH_IN_PORT BIT(0) |
| /* SMAC - for IPv4 and IPv6 packets */ |
| #define MLXSW_REG_SLCR_LAG_HASH_SMAC_IP BIT(1) |
| /* SMAC - for non-IP packets */ |
| #define MLXSW_REG_SLCR_LAG_HASH_SMAC_NONIP BIT(2) |
| #define MLXSW_REG_SLCR_LAG_HASH_SMAC \ |
| (MLXSW_REG_SLCR_LAG_HASH_SMAC_IP | \ |
| MLXSW_REG_SLCR_LAG_HASH_SMAC_NONIP) |
| /* DMAC - for IPv4 and IPv6 packets */ |
| #define MLXSW_REG_SLCR_LAG_HASH_DMAC_IP BIT(3) |
| /* DMAC - for non-IP packets */ |
| #define MLXSW_REG_SLCR_LAG_HASH_DMAC_NONIP BIT(4) |
| #define MLXSW_REG_SLCR_LAG_HASH_DMAC \ |
| (MLXSW_REG_SLCR_LAG_HASH_DMAC_IP | \ |
| MLXSW_REG_SLCR_LAG_HASH_DMAC_NONIP) |
| /* Ethertype - for IPv4 and IPv6 packets */ |
| #define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_IP BIT(5) |
| /* Ethertype - for non-IP packets */ |
| #define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_NONIP BIT(6) |
| #define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE \ |
| (MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_IP | \ |
| MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_NONIP) |
| /* VLAN ID - for IPv4 and IPv6 packets */ |
| #define MLXSW_REG_SLCR_LAG_HASH_VLANID_IP BIT(7) |
| /* VLAN ID - for non-IP packets */ |
| #define MLXSW_REG_SLCR_LAG_HASH_VLANID_NONIP BIT(8) |
| #define MLXSW_REG_SLCR_LAG_HASH_VLANID \ |
| (MLXSW_REG_SLCR_LAG_HASH_VLANID_IP | \ |
| MLXSW_REG_SLCR_LAG_HASH_VLANID_NONIP) |
| /* Source IP address (can be IPv4 or IPv6) */ |
| #define MLXSW_REG_SLCR_LAG_HASH_SIP BIT(9) |
| /* Destination IP address (can be IPv4 or IPv6) */ |
| #define MLXSW_REG_SLCR_LAG_HASH_DIP BIT(10) |
| /* TCP/UDP source port */ |
| #define MLXSW_REG_SLCR_LAG_HASH_SPORT BIT(11) |
| /* TCP/UDP destination port*/ |
| #define MLXSW_REG_SLCR_LAG_HASH_DPORT BIT(12) |
| /* IPv4 Protocol/IPv6 Next Header */ |
| #define MLXSW_REG_SLCR_LAG_HASH_IPPROTO BIT(13) |
| /* IPv6 Flow label */ |
| #define MLXSW_REG_SLCR_LAG_HASH_FLOWLABEL BIT(14) |
| /* SID - FCoE source ID */ |
| #define MLXSW_REG_SLCR_LAG_HASH_FCOE_SID BIT(15) |
| /* DID - FCoE destination ID */ |
| #define MLXSW_REG_SLCR_LAG_HASH_FCOE_DID BIT(16) |
| /* OXID - FCoE originator exchange ID */ |
| #define MLXSW_REG_SLCR_LAG_HASH_FCOE_OXID BIT(17) |
| /* Destination QP number - for RoCE packets */ |
| #define MLXSW_REG_SLCR_LAG_HASH_ROCE_DQP BIT(19) |
| |
| /* reg_slcr_lag_hash |
| * LAG hashing configuration. This is a bitmask, in which each set |
| * bit includes the corresponding item in the LAG hash calculation. |
| * The default lag_hash contains SMAC, DMAC, VLANID and |
| * Ethertype (for all packet types). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, slcr, lag_hash, 0x04, 0, 20); |
| |
| static inline void mlxsw_reg_slcr_pack(char *payload, u16 lag_hash) |
| { |
| MLXSW_REG_ZERO(slcr, payload); |
| mlxsw_reg_slcr_pp_set(payload, MLXSW_REG_SLCR_PP_GLOBAL); |
| mlxsw_reg_slcr_type_set(payload, MLXSW_REG_SLCR_TYPE_CRC); |
| mlxsw_reg_slcr_lag_hash_set(payload, lag_hash); |
| } |
| |
| /* SLCOR - Switch LAG Collector Register |
| * ------------------------------------- |
| * The Switch LAG Collector register controls the Local Port membership |
| * in a LAG and enablement of the collector. |
| */ |
| #define MLXSW_REG_SLCOR_ID 0x2016 |
| #define MLXSW_REG_SLCOR_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(slcor, MLXSW_REG_SLCOR_ID, MLXSW_REG_SLCOR_LEN); |
| |
| enum mlxsw_reg_slcor_col { |
| /* Port is added with collector disabled */ |
| MLXSW_REG_SLCOR_COL_LAG_ADD_PORT, |
| MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED, |
| MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_DISABLED, |
| MLXSW_REG_SLCOR_COL_LAG_REMOVE_PORT, |
| }; |
| |
| /* reg_slcor_col |
| * Collector configuration |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, slcor, col, 0x00, 30, 2); |
| |
| /* reg_slcor_local_port |
| * Local port number |
| * Not supported for CPU port |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, slcor, local_port, 0x00, 16, 8); |
| |
| /* reg_slcor_lag_id |
| * LAG Identifier. Index into the LAG descriptor table. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, slcor, lag_id, 0x00, 0, 10); |
| |
| /* reg_slcor_port_index |
| * Port index in the LAG list. Only valid on Add Port to LAG col. |
| * Valid range is from 0 to cap_max_lag_members-1 |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, slcor, port_index, 0x04, 0, 10); |
| |
| static inline void mlxsw_reg_slcor_pack(char *payload, |
| u8 local_port, u16 lag_id, |
| enum mlxsw_reg_slcor_col col) |
| { |
| MLXSW_REG_ZERO(slcor, payload); |
| mlxsw_reg_slcor_col_set(payload, col); |
| mlxsw_reg_slcor_local_port_set(payload, local_port); |
| mlxsw_reg_slcor_lag_id_set(payload, lag_id); |
| } |
| |
| static inline void mlxsw_reg_slcor_port_add_pack(char *payload, |
| u8 local_port, u16 lag_id, |
| u8 port_index) |
| { |
| mlxsw_reg_slcor_pack(payload, local_port, lag_id, |
| MLXSW_REG_SLCOR_COL_LAG_ADD_PORT); |
| mlxsw_reg_slcor_port_index_set(payload, port_index); |
| } |
| |
| static inline void mlxsw_reg_slcor_port_remove_pack(char *payload, |
| u8 local_port, u16 lag_id) |
| { |
| mlxsw_reg_slcor_pack(payload, local_port, lag_id, |
| MLXSW_REG_SLCOR_COL_LAG_REMOVE_PORT); |
| } |
| |
| static inline void mlxsw_reg_slcor_col_enable_pack(char *payload, |
| u8 local_port, u16 lag_id) |
| { |
| mlxsw_reg_slcor_pack(payload, local_port, lag_id, |
| MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED); |
| } |
| |
| static inline void mlxsw_reg_slcor_col_disable_pack(char *payload, |
| u8 local_port, u16 lag_id) |
| { |
| mlxsw_reg_slcor_pack(payload, local_port, lag_id, |
| MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED); |
| } |
| |
| /* SPMLR - Switch Port MAC Learning Register |
| * ----------------------------------------- |
| * Controls the Switch MAC learning policy per port. |
| */ |
| #define MLXSW_REG_SPMLR_ID 0x2018 |
| #define MLXSW_REG_SPMLR_LEN 0x8 |
| |
| MLXSW_REG_DEFINE(spmlr, MLXSW_REG_SPMLR_ID, MLXSW_REG_SPMLR_LEN); |
| |
| /* reg_spmlr_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, spmlr, local_port, 0x00, 16, 8); |
| |
| /* reg_spmlr_sub_port |
| * Virtual port within the physical port. |
| * Should be set to 0 when virtual ports are not enabled on the port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, spmlr, sub_port, 0x00, 8, 8); |
| |
| enum mlxsw_reg_spmlr_learn_mode { |
| MLXSW_REG_SPMLR_LEARN_MODE_DISABLE = 0, |
| MLXSW_REG_SPMLR_LEARN_MODE_ENABLE = 2, |
| MLXSW_REG_SPMLR_LEARN_MODE_SEC = 3, |
| }; |
| |
| /* reg_spmlr_learn_mode |
| * Learning mode on the port. |
| * 0 - Learning disabled. |
| * 2 - Learning enabled. |
| * 3 - Security mode. |
| * |
| * In security mode the switch does not learn MACs on the port, but uses the |
| * SMAC to see if it exists on another ingress port. If so, the packet is |
| * classified as a bad packet and is discarded unless the software registers |
| * to receive port security error packets usign HPKT. |
| */ |
| MLXSW_ITEM32(reg, spmlr, learn_mode, 0x04, 30, 2); |
| |
| static inline void mlxsw_reg_spmlr_pack(char *payload, u8 local_port, |
| enum mlxsw_reg_spmlr_learn_mode mode) |
| { |
| MLXSW_REG_ZERO(spmlr, payload); |
| mlxsw_reg_spmlr_local_port_set(payload, local_port); |
| mlxsw_reg_spmlr_sub_port_set(payload, 0); |
| mlxsw_reg_spmlr_learn_mode_set(payload, mode); |
| } |
| |
| /* SVFA - Switch VID to FID Allocation Register |
| * -------------------------------------------- |
| * Controls the VID to FID mapping and {Port, VID} to FID mapping for |
| * virtualized ports. |
| */ |
| #define MLXSW_REG_SVFA_ID 0x201C |
| #define MLXSW_REG_SVFA_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(svfa, MLXSW_REG_SVFA_ID, MLXSW_REG_SVFA_LEN); |
| |
| /* reg_svfa_swid |
| * Switch partition ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, svfa, swid, 0x00, 24, 8); |
| |
| /* reg_svfa_local_port |
| * Local port number. |
| * Access: Index |
| * |
| * Note: Reserved for 802.1Q FIDs. |
| */ |
| MLXSW_ITEM32(reg, svfa, local_port, 0x00, 16, 8); |
| |
| enum mlxsw_reg_svfa_mt { |
| MLXSW_REG_SVFA_MT_VID_TO_FID, |
| MLXSW_REG_SVFA_MT_PORT_VID_TO_FID, |
| }; |
| |
| /* reg_svfa_mapping_table |
| * Mapping table: |
| * 0 - VID to FID |
| * 1 - {Port, VID} to FID |
| * Access: Index |
| * |
| * Note: Reserved for SwitchX-2. |
| */ |
| MLXSW_ITEM32(reg, svfa, mapping_table, 0x00, 8, 3); |
| |
| /* reg_svfa_v |
| * Valid. |
| * Valid if set. |
| * Access: RW |
| * |
| * Note: Reserved for SwitchX-2. |
| */ |
| MLXSW_ITEM32(reg, svfa, v, 0x00, 0, 1); |
| |
| /* reg_svfa_fid |
| * Filtering ID. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, svfa, fid, 0x04, 16, 16); |
| |
| /* reg_svfa_vid |
| * VLAN ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, svfa, vid, 0x04, 0, 12); |
| |
| /* reg_svfa_counter_set_type |
| * Counter set type for flow counters. |
| * Access: RW |
| * |
| * Note: Reserved for SwitchX-2. |
| */ |
| MLXSW_ITEM32(reg, svfa, counter_set_type, 0x08, 24, 8); |
| |
| /* reg_svfa_counter_index |
| * Counter index for flow counters. |
| * Access: RW |
| * |
| * Note: Reserved for SwitchX-2. |
| */ |
| MLXSW_ITEM32(reg, svfa, counter_index, 0x08, 0, 24); |
| |
| static inline void mlxsw_reg_svfa_pack(char *payload, u8 local_port, |
| enum mlxsw_reg_svfa_mt mt, bool valid, |
| u16 fid, u16 vid) |
| { |
| MLXSW_REG_ZERO(svfa, payload); |
| local_port = mt == MLXSW_REG_SVFA_MT_VID_TO_FID ? 0 : local_port; |
| mlxsw_reg_svfa_swid_set(payload, 0); |
| mlxsw_reg_svfa_local_port_set(payload, local_port); |
| mlxsw_reg_svfa_mapping_table_set(payload, mt); |
| mlxsw_reg_svfa_v_set(payload, valid); |
| mlxsw_reg_svfa_fid_set(payload, fid); |
| mlxsw_reg_svfa_vid_set(payload, vid); |
| } |
| |
| /* SVPE - Switch Virtual-Port Enabling Register |
| * -------------------------------------------- |
| * Enables port virtualization. |
| */ |
| #define MLXSW_REG_SVPE_ID 0x201E |
| #define MLXSW_REG_SVPE_LEN 0x4 |
| |
| MLXSW_REG_DEFINE(svpe, MLXSW_REG_SVPE_ID, MLXSW_REG_SVPE_LEN); |
| |
| /* reg_svpe_local_port |
| * Local port number |
| * Access: Index |
| * |
| * Note: CPU port is not supported (uses VLAN mode only). |
| */ |
| MLXSW_ITEM32(reg, svpe, local_port, 0x00, 16, 8); |
| |
| /* reg_svpe_vp_en |
| * Virtual port enable. |
| * 0 - Disable, VLAN mode (VID to FID). |
| * 1 - Enable, Virtual port mode ({Port, VID} to FID). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, svpe, vp_en, 0x00, 8, 1); |
| |
| static inline void mlxsw_reg_svpe_pack(char *payload, u8 local_port, |
| bool enable) |
| { |
| MLXSW_REG_ZERO(svpe, payload); |
| mlxsw_reg_svpe_local_port_set(payload, local_port); |
| mlxsw_reg_svpe_vp_en_set(payload, enable); |
| } |
| |
| /* SFMR - Switch FID Management Register |
| * ------------------------------------- |
| * Creates and configures FIDs. |
| */ |
| #define MLXSW_REG_SFMR_ID 0x201F |
| #define MLXSW_REG_SFMR_LEN 0x18 |
| |
| MLXSW_REG_DEFINE(sfmr, MLXSW_REG_SFMR_ID, MLXSW_REG_SFMR_LEN); |
| |
| enum mlxsw_reg_sfmr_op { |
| MLXSW_REG_SFMR_OP_CREATE_FID, |
| MLXSW_REG_SFMR_OP_DESTROY_FID, |
| }; |
| |
| /* reg_sfmr_op |
| * Operation. |
| * 0 - Create or edit FID. |
| * 1 - Destroy FID. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, sfmr, op, 0x00, 24, 4); |
| |
| /* reg_sfmr_fid |
| * Filtering ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sfmr, fid, 0x00, 0, 16); |
| |
| /* reg_sfmr_fid_offset |
| * FID offset. |
| * Used to point into the flooding table selected by SFGC register if |
| * the table is of type FID-Offset. Otherwise, this field is reserved. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfmr, fid_offset, 0x08, 0, 16); |
| |
| /* reg_sfmr_vtfp |
| * Valid Tunnel Flood Pointer. |
| * If not set, then nve_tunnel_flood_ptr is reserved and considered NULL. |
| * Access: RW |
| * |
| * Note: Reserved for 802.1Q FIDs. |
| */ |
| MLXSW_ITEM32(reg, sfmr, vtfp, 0x0C, 31, 1); |
| |
| /* reg_sfmr_nve_tunnel_flood_ptr |
| * Underlay Flooding and BC Pointer. |
| * Used as a pointer to the first entry of the group based link lists of |
| * flooding or BC entries (for NVE tunnels). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sfmr, nve_tunnel_flood_ptr, 0x0C, 0, 24); |
| |
| /* reg_sfmr_vv |
| * VNI Valid. |
| * If not set, then vni is reserved. |
| * Access: RW |
| * |
| * Note: Reserved for 802.1Q FIDs. |
| */ |
| MLXSW_ITEM32(reg, sfmr, vv, 0x10, 31, 1); |
| |
| /* reg_sfmr_vni |
| * Virtual Network Identifier. |
| * Access: RW |
| * |
| * Note: A given VNI can only be assigned to one FID. |
| */ |
| MLXSW_ITEM32(reg, sfmr, vni, 0x10, 0, 24); |
| |
| static inline void mlxsw_reg_sfmr_pack(char *payload, |
| enum mlxsw_reg_sfmr_op op, u16 fid, |
| u16 fid_offset) |
| { |
| MLXSW_REG_ZERO(sfmr, payload); |
| mlxsw_reg_sfmr_op_set(payload, op); |
| mlxsw_reg_sfmr_fid_set(payload, fid); |
| mlxsw_reg_sfmr_fid_offset_set(payload, fid_offset); |
| mlxsw_reg_sfmr_vtfp_set(payload, false); |
| mlxsw_reg_sfmr_vv_set(payload, false); |
| } |
| |
| /* SPVMLR - Switch Port VLAN MAC Learning Register |
| * ----------------------------------------------- |
| * Controls the switch MAC learning policy per {Port, VID}. |
| */ |
| #define MLXSW_REG_SPVMLR_ID 0x2020 |
| #define MLXSW_REG_SPVMLR_BASE_LEN 0x04 /* base length, without records */ |
| #define MLXSW_REG_SPVMLR_REC_LEN 0x04 /* record length */ |
| #define MLXSW_REG_SPVMLR_REC_MAX_COUNT 256 |
| #define MLXSW_REG_SPVMLR_LEN (MLXSW_REG_SPVMLR_BASE_LEN + \ |
| MLXSW_REG_SPVMLR_REC_LEN * \ |
| MLXSW_REG_SPVMLR_REC_MAX_COUNT) |
| |
| MLXSW_REG_DEFINE(spvmlr, MLXSW_REG_SPVMLR_ID, MLXSW_REG_SPVMLR_LEN); |
| |
| /* reg_spvmlr_local_port |
| * Local ingress port. |
| * Access: Index |
| * |
| * Note: CPU port is not supported. |
| */ |
| MLXSW_ITEM32(reg, spvmlr, local_port, 0x00, 16, 8); |
| |
| /* reg_spvmlr_num_rec |
| * Number of records to update. |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, spvmlr, num_rec, 0x00, 0, 8); |
| |
| /* reg_spvmlr_rec_learn_enable |
| * 0 - Disable learning for {Port, VID}. |
| * 1 - Enable learning for {Port, VID}. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_learn_enable, MLXSW_REG_SPVMLR_BASE_LEN, |
| 31, 1, MLXSW_REG_SPVMLR_REC_LEN, 0x00, false); |
| |
| /* reg_spvmlr_rec_vid |
| * VLAN ID to be added/removed from port or for querying. |
| * Access: Index |
| */ |
| MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_vid, MLXSW_REG_SPVMLR_BASE_LEN, 0, 12, |
| MLXSW_REG_SPVMLR_REC_LEN, 0x00, false); |
| |
| static inline void mlxsw_reg_spvmlr_pack(char *payload, u8 local_port, |
| u16 vid_begin, u16 vid_end, |
| bool learn_enable) |
| { |
| int num_rec = vid_end - vid_begin + 1; |
| int i; |
| |
| WARN_ON(num_rec < 1 || num_rec > MLXSW_REG_SPVMLR_REC_MAX_COUNT); |
| |
| MLXSW_REG_ZERO(spvmlr, payload); |
| mlxsw_reg_spvmlr_local_port_set(payload, local_port); |
| mlxsw_reg_spvmlr_num_rec_set(payload, num_rec); |
| |
| for (i = 0; i < num_rec; i++) { |
| mlxsw_reg_spvmlr_rec_learn_enable_set(payload, i, learn_enable); |
| mlxsw_reg_spvmlr_rec_vid_set(payload, i, vid_begin + i); |
| } |
| } |
| |
| /* PPBT - Policy-Engine Port Binding Table |
| * --------------------------------------- |
| * This register is used for configuration of the Port Binding Table. |
| */ |
| #define MLXSW_REG_PPBT_ID 0x3002 |
| #define MLXSW_REG_PPBT_LEN 0x14 |
| |
| MLXSW_REG_DEFINE(ppbt, MLXSW_REG_PPBT_ID, MLXSW_REG_PPBT_LEN); |
| |
| enum mlxsw_reg_pxbt_e { |
| MLXSW_REG_PXBT_E_IACL, |
| MLXSW_REG_PXBT_E_EACL, |
| }; |
| |
| /* reg_ppbt_e |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ppbt, e, 0x00, 31, 1); |
| |
| enum mlxsw_reg_pxbt_op { |
| MLXSW_REG_PXBT_OP_BIND, |
| MLXSW_REG_PXBT_OP_UNBIND, |
| }; |
| |
| /* reg_ppbt_op |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ppbt, op, 0x00, 28, 3); |
| |
| /* reg_ppbt_local_port |
| * Local port. Not including CPU port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ppbt, local_port, 0x00, 16, 8); |
| |
| /* reg_ppbt_g |
| * group - When set, the binding is of an ACL group. When cleared, |
| * the binding is of an ACL. |
| * Must be set to 1 for Spectrum. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ppbt, g, 0x10, 31, 1); |
| |
| /* reg_ppbt_acl_info |
| * ACL/ACL group identifier. If the g bit is set, this field should hold |
| * the acl_group_id, else it should hold the acl_id. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ppbt, acl_info, 0x10, 0, 16); |
| |
| static inline void mlxsw_reg_ppbt_pack(char *payload, enum mlxsw_reg_pxbt_e e, |
| enum mlxsw_reg_pxbt_op op, |
| u8 local_port, u16 acl_info) |
| { |
| MLXSW_REG_ZERO(ppbt, payload); |
| mlxsw_reg_ppbt_e_set(payload, e); |
| mlxsw_reg_ppbt_op_set(payload, op); |
| mlxsw_reg_ppbt_local_port_set(payload, local_port); |
| mlxsw_reg_ppbt_g_set(payload, true); |
| mlxsw_reg_ppbt_acl_info_set(payload, acl_info); |
| } |
| |
| /* PACL - Policy-Engine ACL Register |
| * --------------------------------- |
| * This register is used for configuration of the ACL. |
| */ |
| #define MLXSW_REG_PACL_ID 0x3004 |
| #define MLXSW_REG_PACL_LEN 0x70 |
| |
| MLXSW_REG_DEFINE(pacl, MLXSW_REG_PACL_ID, MLXSW_REG_PACL_LEN); |
| |
| /* reg_pacl_v |
| * Valid. Setting the v bit makes the ACL valid. It should not be cleared |
| * while the ACL is bounded to either a port, VLAN or ACL rule. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pacl, v, 0x00, 24, 1); |
| |
| /* reg_pacl_acl_id |
| * An identifier representing the ACL (managed by software) |
| * Range 0 .. cap_max_acl_regions - 1 |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pacl, acl_id, 0x08, 0, 16); |
| |
| #define MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN 16 |
| |
| /* reg_pacl_tcam_region_info |
| * Opaque object that represents a TCAM region. |
| * Obtained through PTAR register. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, pacl, tcam_region_info, 0x30, |
| MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); |
| |
| static inline void mlxsw_reg_pacl_pack(char *payload, u16 acl_id, |
| bool valid, const char *tcam_region_info) |
| { |
| MLXSW_REG_ZERO(pacl, payload); |
| mlxsw_reg_pacl_acl_id_set(payload, acl_id); |
| mlxsw_reg_pacl_v_set(payload, valid); |
| mlxsw_reg_pacl_tcam_region_info_memcpy_to(payload, tcam_region_info); |
| } |
| |
| /* PAGT - Policy-Engine ACL Group Table |
| * ------------------------------------ |
| * This register is used for configuration of the ACL Group Table. |
| */ |
| #define MLXSW_REG_PAGT_ID 0x3005 |
| #define MLXSW_REG_PAGT_BASE_LEN 0x30 |
| #define MLXSW_REG_PAGT_ACL_LEN 4 |
| #define MLXSW_REG_PAGT_ACL_MAX_NUM 16 |
| #define MLXSW_REG_PAGT_LEN (MLXSW_REG_PAGT_BASE_LEN + \ |
| MLXSW_REG_PAGT_ACL_MAX_NUM * MLXSW_REG_PAGT_ACL_LEN) |
| |
| MLXSW_REG_DEFINE(pagt, MLXSW_REG_PAGT_ID, MLXSW_REG_PAGT_LEN); |
| |
| /* reg_pagt_size |
| * Number of ACLs in the group. |
| * Size 0 invalidates a group. |
| * Range 0 .. cap_max_acl_group_size (hard coded to 16 for now) |
| * Total number of ACLs in all groups must be lower or equal |
| * to cap_max_acl_tot_groups |
| * Note: a group which is binded must not be invalidated |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pagt, size, 0x00, 0, 8); |
| |
| /* reg_pagt_acl_group_id |
| * An identifier (numbered from 0..cap_max_acl_groups-1) representing |
| * the ACL Group identifier (managed by software). |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pagt, acl_group_id, 0x08, 0, 16); |
| |
| /* reg_pagt_acl_id |
| * ACL identifier |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, pagt, acl_id, 0x30, 0, 16, 0x04, 0x00, false); |
| |
| static inline void mlxsw_reg_pagt_pack(char *payload, u16 acl_group_id) |
| { |
| MLXSW_REG_ZERO(pagt, payload); |
| mlxsw_reg_pagt_acl_group_id_set(payload, acl_group_id); |
| } |
| |
| static inline void mlxsw_reg_pagt_acl_id_pack(char *payload, int index, |
| u16 acl_id) |
| { |
| u8 size = mlxsw_reg_pagt_size_get(payload); |
| |
| if (index >= size) |
| mlxsw_reg_pagt_size_set(payload, index + 1); |
| mlxsw_reg_pagt_acl_id_set(payload, index, acl_id); |
| } |
| |
| /* PTAR - Policy-Engine TCAM Allocation Register |
| * --------------------------------------------- |
| * This register is used for allocation of regions in the TCAM. |
| * Note: Query method is not supported on this register. |
| */ |
| #define MLXSW_REG_PTAR_ID 0x3006 |
| #define MLXSW_REG_PTAR_BASE_LEN 0x20 |
| #define MLXSW_REG_PTAR_KEY_ID_LEN 1 |
| #define MLXSW_REG_PTAR_KEY_ID_MAX_NUM 16 |
| #define MLXSW_REG_PTAR_LEN (MLXSW_REG_PTAR_BASE_LEN + \ |
| MLXSW_REG_PTAR_KEY_ID_MAX_NUM * MLXSW_REG_PTAR_KEY_ID_LEN) |
| |
| MLXSW_REG_DEFINE(ptar, MLXSW_REG_PTAR_ID, MLXSW_REG_PTAR_LEN); |
| |
| enum mlxsw_reg_ptar_op { |
| /* allocate a TCAM region */ |
| MLXSW_REG_PTAR_OP_ALLOC, |
| /* resize a TCAM region */ |
| MLXSW_REG_PTAR_OP_RESIZE, |
| /* deallocate TCAM region */ |
| MLXSW_REG_PTAR_OP_FREE, |
| /* test allocation */ |
| MLXSW_REG_PTAR_OP_TEST, |
| }; |
| |
| /* reg_ptar_op |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, ptar, op, 0x00, 28, 4); |
| |
| /* reg_ptar_action_set_type |
| * Type of action set to be used on this region. |
| * For Spectrum, this is always type 2 - "flexible" |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, ptar, action_set_type, 0x00, 16, 8); |
| |
| /* reg_ptar_key_type |
| * TCAM key type for the region. |
| * For Spectrum, this is always type 0x50 - "FLEX_KEY" |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, ptar, key_type, 0x00, 0, 8); |
| |
| /* reg_ptar_region_size |
| * TCAM region size. When allocating/resizing this is the requested size, |
| * the response is the actual size. Note that actual size may be |
| * larger than requested. |
| * Allowed range 1 .. cap_max_rules-1 |
| * Reserved during op deallocate. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, ptar, region_size, 0x04, 0, 16); |
| |
| /* reg_ptar_region_id |
| * Region identifier |
| * Range 0 .. cap_max_regions-1 |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ptar, region_id, 0x08, 0, 16); |
| |
| /* reg_ptar_tcam_region_info |
| * Opaque object that represents the TCAM region. |
| * Returned when allocating a region. |
| * Provided by software for ACL generation and region deallocation and resize. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, ptar, tcam_region_info, 0x10, |
| MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); |
| |
| /* reg_ptar_flexible_key_id |
| * Identifier of the Flexible Key. |
| * Only valid if key_type == "FLEX_KEY" |
| * The key size will be rounded up to one of the following values: |
| * 9B, 18B, 36B, 54B. |
| * This field is reserved for in resize operation. |
| * Access: WO |
| */ |
| MLXSW_ITEM8_INDEXED(reg, ptar, flexible_key_id, 0x20, 0, 8, |
| MLXSW_REG_PTAR_KEY_ID_LEN, 0x00, false); |
| |
| static inline void mlxsw_reg_ptar_pack(char *payload, enum mlxsw_reg_ptar_op op, |
| u16 region_size, u16 region_id, |
| const char *tcam_region_info) |
| { |
| MLXSW_REG_ZERO(ptar, payload); |
| mlxsw_reg_ptar_op_set(payload, op); |
| mlxsw_reg_ptar_action_set_type_set(payload, 2); /* "flexible" */ |
| mlxsw_reg_ptar_key_type_set(payload, 0x50); /* "FLEX_KEY" */ |
| mlxsw_reg_ptar_region_size_set(payload, region_size); |
| mlxsw_reg_ptar_region_id_set(payload, region_id); |
| mlxsw_reg_ptar_tcam_region_info_memcpy_to(payload, tcam_region_info); |
| } |
| |
| static inline void mlxsw_reg_ptar_key_id_pack(char *payload, int index, |
| u16 key_id) |
| { |
| mlxsw_reg_ptar_flexible_key_id_set(payload, index, key_id); |
| } |
| |
| static inline void mlxsw_reg_ptar_unpack(char *payload, char *tcam_region_info) |
| { |
| mlxsw_reg_ptar_tcam_region_info_memcpy_from(payload, tcam_region_info); |
| } |
| |
| /* PPBS - Policy-Engine Policy Based Switching Register |
| * ---------------------------------------------------- |
| * This register retrieves and sets Policy Based Switching Table entries. |
| */ |
| #define MLXSW_REG_PPBS_ID 0x300C |
| #define MLXSW_REG_PPBS_LEN 0x14 |
| |
| MLXSW_REG_DEFINE(ppbs, MLXSW_REG_PPBS_ID, MLXSW_REG_PPBS_LEN); |
| |
| /* reg_ppbs_pbs_ptr |
| * Index into the PBS table. |
| * For Spectrum, the index points to the KVD Linear. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ppbs, pbs_ptr, 0x08, 0, 24); |
| |
| /* reg_ppbs_system_port |
| * Unique port identifier for the final destination of the packet. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ppbs, system_port, 0x10, 0, 16); |
| |
| static inline void mlxsw_reg_ppbs_pack(char *payload, u32 pbs_ptr, |
| u16 system_port) |
| { |
| MLXSW_REG_ZERO(ppbs, payload); |
| mlxsw_reg_ppbs_pbs_ptr_set(payload, pbs_ptr); |
| mlxsw_reg_ppbs_system_port_set(payload, system_port); |
| } |
| |
| /* PRCR - Policy-Engine Rules Copy Register |
| * ---------------------------------------- |
| * This register is used for accessing rules within a TCAM region. |
| */ |
| #define MLXSW_REG_PRCR_ID 0x300D |
| #define MLXSW_REG_PRCR_LEN 0x40 |
| |
| MLXSW_REG_DEFINE(prcr, MLXSW_REG_PRCR_ID, MLXSW_REG_PRCR_LEN); |
| |
| enum mlxsw_reg_prcr_op { |
| /* Move rules. Moves the rules from "tcam_region_info" starting |
| * at offset "offset" to "dest_tcam_region_info" |
| * at offset "dest_offset." |
| */ |
| MLXSW_REG_PRCR_OP_MOVE, |
| /* Copy rules. Copies the rules from "tcam_region_info" starting |
| * at offset "offset" to "dest_tcam_region_info" |
| * at offset "dest_offset." |
| */ |
| MLXSW_REG_PRCR_OP_COPY, |
| }; |
| |
| /* reg_prcr_op |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, prcr, op, 0x00, 28, 4); |
| |
| /* reg_prcr_offset |
| * Offset within the source region to copy/move from. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, prcr, offset, 0x00, 0, 16); |
| |
| /* reg_prcr_size |
| * The number of rules to copy/move. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, prcr, size, 0x04, 0, 16); |
| |
| /* reg_prcr_tcam_region_info |
| * Opaque object that represents the source TCAM region. |
| * Access: Index |
| */ |
| MLXSW_ITEM_BUF(reg, prcr, tcam_region_info, 0x10, |
| MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); |
| |
| /* reg_prcr_dest_offset |
| * Offset within the source region to copy/move to. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, prcr, dest_offset, 0x20, 0, 16); |
| |
| /* reg_prcr_dest_tcam_region_info |
| * Opaque object that represents the destination TCAM region. |
| * Access: Index |
| */ |
| MLXSW_ITEM_BUF(reg, prcr, dest_tcam_region_info, 0x30, |
| MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); |
| |
| static inline void mlxsw_reg_prcr_pack(char *payload, enum mlxsw_reg_prcr_op op, |
| const char *src_tcam_region_info, |
| u16 src_offset, |
| const char *dest_tcam_region_info, |
| u16 dest_offset, u16 size) |
| { |
| MLXSW_REG_ZERO(prcr, payload); |
| mlxsw_reg_prcr_op_set(payload, op); |
| mlxsw_reg_prcr_offset_set(payload, src_offset); |
| mlxsw_reg_prcr_size_set(payload, size); |
| mlxsw_reg_prcr_tcam_region_info_memcpy_to(payload, |
| src_tcam_region_info); |
| mlxsw_reg_prcr_dest_offset_set(payload, dest_offset); |
| mlxsw_reg_prcr_dest_tcam_region_info_memcpy_to(payload, |
| dest_tcam_region_info); |
| } |
| |
| /* PEFA - Policy-Engine Extended Flexible Action Register |
| * ------------------------------------------------------ |
| * This register is used for accessing an extended flexible action entry |
| * in the central KVD Linear Database. |
| */ |
| #define MLXSW_REG_PEFA_ID 0x300F |
| #define MLXSW_REG_PEFA_LEN 0xB0 |
| |
| MLXSW_REG_DEFINE(pefa, MLXSW_REG_PEFA_ID, MLXSW_REG_PEFA_LEN); |
| |
| /* reg_pefa_index |
| * Index in the KVD Linear Centralized Database. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pefa, index, 0x00, 0, 24); |
| |
| #define MLXSW_REG_PXXX_FLEX_ACTION_SET_LEN 0xA8 |
| |
| /* reg_pefa_flex_action_set |
| * Action-set to perform when rule is matched. |
| * Must be zero padded if action set is shorter. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, pefa, flex_action_set, 0x08, |
| MLXSW_REG_PXXX_FLEX_ACTION_SET_LEN); |
| |
| static inline void mlxsw_reg_pefa_pack(char *payload, u32 index, |
| const char *flex_action_set) |
| { |
| MLXSW_REG_ZERO(pefa, payload); |
| mlxsw_reg_pefa_index_set(payload, index); |
| mlxsw_reg_pefa_flex_action_set_memcpy_to(payload, flex_action_set); |
| } |
| |
| /* PTCE-V2 - Policy-Engine TCAM Entry Register Version 2 |
| * ----------------------------------------------------- |
| * This register is used for accessing rules within a TCAM region. |
| * It is a new version of PTCE in order to support wider key, |
| * mask and action within a TCAM region. This register is not supported |
| * by SwitchX and SwitchX-2. |
| */ |
| #define MLXSW_REG_PTCE2_ID 0x3017 |
| #define MLXSW_REG_PTCE2_LEN 0x1D8 |
| |
| MLXSW_REG_DEFINE(ptce2, MLXSW_REG_PTCE2_ID, MLXSW_REG_PTCE2_LEN); |
| |
| /* reg_ptce2_v |
| * Valid. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ptce2, v, 0x00, 31, 1); |
| |
| /* reg_ptce2_a |
| * Activity. Set if a packet lookup has hit on the specific entry. |
| * To clear the "a" bit, use "clear activity" op or "clear on read" op. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ptce2, a, 0x00, 30, 1); |
| |
| enum mlxsw_reg_ptce2_op { |
| /* Read operation. */ |
| MLXSW_REG_PTCE2_OP_QUERY_READ = 0, |
| /* clear on read operation. Used to read entry |
| * and clear Activity bit. |
| */ |
| MLXSW_REG_PTCE2_OP_QUERY_CLEAR_ON_READ = 1, |
| /* Write operation. Used to write a new entry to the table. |
| * All R/W fields are relevant for new entry. Activity bit is set |
| * for new entries - Note write with v = 0 will delete the entry. |
| */ |
| MLXSW_REG_PTCE2_OP_WRITE_WRITE = 0, |
| /* Update action. Only action set will be updated. */ |
| MLXSW_REG_PTCE2_OP_WRITE_UPDATE = 1, |
| /* Clear activity. A bit is cleared for the entry. */ |
| MLXSW_REG_PTCE2_OP_WRITE_CLEAR_ACTIVITY = 2, |
| }; |
| |
| /* reg_ptce2_op |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, ptce2, op, 0x00, 20, 3); |
| |
| /* reg_ptce2_offset |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ptce2, offset, 0x00, 0, 16); |
| |
| /* reg_ptce2_tcam_region_info |
| * Opaque object that represents the TCAM region. |
| * Access: Index |
| */ |
| MLXSW_ITEM_BUF(reg, ptce2, tcam_region_info, 0x10, |
| MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); |
| |
| #define MLXSW_REG_PTCE2_FLEX_KEY_BLOCKS_LEN 96 |
| |
| /* reg_ptce2_flex_key_blocks |
| * ACL Key. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, ptce2, flex_key_blocks, 0x20, |
| MLXSW_REG_PTCE2_FLEX_KEY_BLOCKS_LEN); |
| |
| /* reg_ptce2_mask |
| * mask- in the same size as key. A bit that is set directs the TCAM |
| * to compare the corresponding bit in key. A bit that is clear directs |
| * the TCAM to ignore the corresponding bit in key. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, ptce2, mask, 0x80, |
| MLXSW_REG_PTCE2_FLEX_KEY_BLOCKS_LEN); |
| |
| /* reg_ptce2_flex_action_set |
| * ACL action set. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, ptce2, flex_action_set, 0xE0, |
| MLXSW_REG_PXXX_FLEX_ACTION_SET_LEN); |
| |
| static inline void mlxsw_reg_ptce2_pack(char *payload, bool valid, |
| enum mlxsw_reg_ptce2_op op, |
| const char *tcam_region_info, |
| u16 offset) |
| { |
| MLXSW_REG_ZERO(ptce2, payload); |
| mlxsw_reg_ptce2_v_set(payload, valid); |
| mlxsw_reg_ptce2_op_set(payload, op); |
| mlxsw_reg_ptce2_offset_set(payload, offset); |
| mlxsw_reg_ptce2_tcam_region_info_memcpy_to(payload, tcam_region_info); |
| } |
| |
| /* QPCR - QoS Policer Configuration Register |
| * ----------------------------------------- |
| * The QPCR register is used to create policers - that limit |
| * the rate of bytes or packets via some trap group. |
| */ |
| #define MLXSW_REG_QPCR_ID 0x4004 |
| #define MLXSW_REG_QPCR_LEN 0x28 |
| |
| MLXSW_REG_DEFINE(qpcr, MLXSW_REG_QPCR_ID, MLXSW_REG_QPCR_LEN); |
| |
| enum mlxsw_reg_qpcr_g { |
| MLXSW_REG_QPCR_G_GLOBAL = 2, |
| MLXSW_REG_QPCR_G_STORM_CONTROL = 3, |
| }; |
| |
| /* reg_qpcr_g |
| * The policer type. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, qpcr, g, 0x00, 14, 2); |
| |
| /* reg_qpcr_pid |
| * Policer ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, qpcr, pid, 0x00, 0, 14); |
| |
| /* reg_qpcr_color_aware |
| * Is the policer aware of colors. |
| * Must be 0 (unaware) for cpu port. |
| * Access: RW for unbounded policer. RO for bounded policer. |
| */ |
| MLXSW_ITEM32(reg, qpcr, color_aware, 0x04, 15, 1); |
| |
| /* reg_qpcr_bytes |
| * Is policer limit is for bytes per sec or packets per sec. |
| * 0 - packets |
| * 1 - bytes |
| * Access: RW for unbounded policer. RO for bounded policer. |
| */ |
| MLXSW_ITEM32(reg, qpcr, bytes, 0x04, 14, 1); |
| |
| enum mlxsw_reg_qpcr_ir_units { |
| MLXSW_REG_QPCR_IR_UNITS_M, |
| MLXSW_REG_QPCR_IR_UNITS_K, |
| }; |
| |
| /* reg_qpcr_ir_units |
| * Policer's units for cir and eir fields (for bytes limits only) |
| * 1 - 10^3 |
| * 0 - 10^6 |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, qpcr, ir_units, 0x04, 12, 1); |
| |
| enum mlxsw_reg_qpcr_rate_type { |
| MLXSW_REG_QPCR_RATE_TYPE_SINGLE = 1, |
| MLXSW_REG_QPCR_RATE_TYPE_DOUBLE = 2, |
| }; |
| |
| /* reg_qpcr_rate_type |
| * Policer can have one limit (single rate) or 2 limits with specific operation |
| * for packets that exceed the lower rate but not the upper one. |
| * (For cpu port must be single rate) |
| * Access: RW for unbounded policer. RO for bounded policer. |
| */ |
| MLXSW_ITEM32(reg, qpcr, rate_type, 0x04, 8, 2); |
| |
| /* reg_qpc_cbs |
| * Policer's committed burst size. |
| * The policer is working with time slices of 50 nano sec. By default every |
| * slice is granted the proportionate share of the committed rate. If we want to |
| * allow a slice to exceed that share (while still keeping the rate per sec) we |
| * can allow burst. The burst size is between the default proportionate share |
| * (and no lower than 8) to 32Gb. (Even though giving a number higher than the |
| * committed rate will result in exceeding the rate). The burst size must be a |
| * log of 2 and will be determined by 2^cbs. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, qpcr, cbs, 0x08, 24, 6); |
| |
| /* reg_qpcr_cir |
| * Policer's committed rate. |
| * The rate used for sungle rate, the lower rate for double rate. |
| * For bytes limits, the rate will be this value * the unit from ir_units. |
| * (Resolution error is up to 1%). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, qpcr, cir, 0x0C, 0, 32); |
| |
| /* reg_qpcr_eir |
| * Policer's exceed rate. |
| * The higher rate for double rate, reserved for single rate. |
| * Lower rate for double rate policer. |
| * For bytes limits, the rate will be this value * the unit from ir_units. |
| * (Resolution error is up to 1%). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, qpcr, eir, 0x10, 0, 32); |
| |
| #define MLXSW_REG_QPCR_DOUBLE_RATE_ACTION 2 |
| |
| /* reg_qpcr_exceed_action. |
| * What to do with packets between the 2 limits for double rate. |
| * Access: RW for unbounded policer. RO for bounded policer. |
| */ |
| MLXSW_ITEM32(reg, qpcr, exceed_action, 0x14, 0, 4); |
| |
| enum mlxsw_reg_qpcr_action { |
| /* Discard */ |
| MLXSW_REG_QPCR_ACTION_DISCARD = 1, |
| /* Forward and set color to red. |
| * If the packet is intended to cpu port, it will be dropped. |
| */ |
| MLXSW_REG_QPCR_ACTION_FORWARD = 2, |
| }; |
| |
| /* reg_qpcr_violate_action |
| * What to do with packets that cross the cir limit (for single rate) or the eir |
| * limit (for double rate). |
| * Access: RW for unbounded policer. RO for bounded policer. |
| */ |
| MLXSW_ITEM32(reg, qpcr, violate_action, 0x18, 0, 4); |
| |
| static inline void mlxsw_reg_qpcr_pack(char *payload, u16 pid, |
| enum mlxsw_reg_qpcr_ir_units ir_units, |
| bool bytes, u32 cir, u16 cbs) |
| { |
| MLXSW_REG_ZERO(qpcr, payload); |
| mlxsw_reg_qpcr_pid_set(payload, pid); |
| mlxsw_reg_qpcr_g_set(payload, MLXSW_REG_QPCR_G_GLOBAL); |
| mlxsw_reg_qpcr_rate_type_set(payload, MLXSW_REG_QPCR_RATE_TYPE_SINGLE); |
| mlxsw_reg_qpcr_violate_action_set(payload, |
| MLXSW_REG_QPCR_ACTION_DISCARD); |
| mlxsw_reg_qpcr_cir_set(payload, cir); |
| mlxsw_reg_qpcr_ir_units_set(payload, ir_units); |
| mlxsw_reg_qpcr_bytes_set(payload, bytes); |
| mlxsw_reg_qpcr_cbs_set(payload, cbs); |
| } |
| |
| /* QTCT - QoS Switch Traffic Class Table |
| * ------------------------------------- |
| * Configures the mapping between the packet switch priority and the |
| * traffic class on the transmit port. |
| */ |
| #define MLXSW_REG_QTCT_ID 0x400A |
| #define MLXSW_REG_QTCT_LEN 0x08 |
| |
| MLXSW_REG_DEFINE(qtct, MLXSW_REG_QTCT_ID, MLXSW_REG_QTCT_LEN); |
| |
| /* reg_qtct_local_port |
| * Local port number. |
| * Access: Index |
| * |
| * Note: CPU port is not supported. |
| */ |
| MLXSW_ITEM32(reg, qtct, local_port, 0x00, 16, 8); |
| |
| /* reg_qtct_sub_port |
| * Virtual port within the physical port. |
| * Should be set to 0 when virtual ports are not enabled on the port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, qtct, sub_port, 0x00, 8, 8); |
| |
| /* reg_qtct_switch_prio |
| * Switch priority. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, qtct, switch_prio, 0x00, 0, 4); |
| |
| /* reg_qtct_tclass |
| * Traffic class. |
| * Default values: |
| * switch_prio 0 : tclass 1 |
| * switch_prio 1 : tclass 0 |
| * switch_prio i : tclass i, for i > 1 |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, qtct, tclass, 0x04, 0, 4); |
| |
| static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port, |
| u8 switch_prio, u8 tclass) |
| { |
| MLXSW_REG_ZERO(qtct, payload); |
| mlxsw_reg_qtct_local_port_set(payload, local_port); |
| mlxsw_reg_qtct_switch_prio_set(payload, switch_prio); |
| mlxsw_reg_qtct_tclass_set(payload, tclass); |
| } |
| |
| /* QEEC - QoS ETS Element Configuration Register |
| * --------------------------------------------- |
| * Configures the ETS elements. |
| */ |
| #define MLXSW_REG_QEEC_ID 0x400D |
| #define MLXSW_REG_QEEC_LEN 0x1C |
| |
| MLXSW_REG_DEFINE(qeec, MLXSW_REG_QEEC_ID, MLXSW_REG_QEEC_LEN); |
| |
| /* reg_qeec_local_port |
| * Local port number. |
| * Access: Index |
| * |
| * Note: CPU port is supported. |
| */ |
| MLXSW_ITEM32(reg, qeec, local_port, 0x00, 16, 8); |
| |
| enum mlxsw_reg_qeec_hr { |
| MLXSW_REG_QEEC_HIERARCY_PORT, |
| MLXSW_REG_QEEC_HIERARCY_GROUP, |
| MLXSW_REG_QEEC_HIERARCY_SUBGROUP, |
| MLXSW_REG_QEEC_HIERARCY_TC, |
| }; |
| |
| /* reg_qeec_element_hierarchy |
| * 0 - Port |
| * 1 - Group |
| * 2 - Subgroup |
| * 3 - Traffic Class |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, qeec, element_hierarchy, 0x04, 16, 4); |
| |
| /* reg_qeec_element_index |
| * The index of the element in the hierarchy. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, qeec, element_index, 0x04, 0, 8); |
| |
| /* reg_qeec_next_element_index |
| * The index of the next (lower) element in the hierarchy. |
| * Access: RW |
| * |
| * Note: Reserved for element_hierarchy 0. |
| */ |
| MLXSW_ITEM32(reg, qeec, next_element_index, 0x08, 0, 8); |
| |
| enum { |
| MLXSW_REG_QEEC_BYTES_MODE, |
| MLXSW_REG_QEEC_PACKETS_MODE, |
| }; |
| |
| /* reg_qeec_pb |
| * Packets or bytes mode. |
| * 0 - Bytes mode |
| * 1 - Packets mode |
| * Access: RW |
| * |
| * Note: Used for max shaper configuration. For Spectrum, packets mode |
| * is supported only for traffic classes of CPU port. |
| */ |
| MLXSW_ITEM32(reg, qeec, pb, 0x0C, 28, 1); |
| |
| /* reg_qeec_mase |
| * Max shaper configuration enable. Enables configuration of the max |
| * shaper on this ETS element. |
| * 0 - Disable |
| * 1 - Enable |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, qeec, mase, 0x10, 31, 1); |
| |
| /* A large max rate will disable the max shaper. */ |
| #define MLXSW_REG_QEEC_MAS_DIS 200000000 /* Kbps */ |
| |
| /* reg_qeec_max_shaper_rate |
| * Max shaper information rate. |
| * For CPU port, can only be configured for port hierarchy. |
| * When in bytes mode, value is specified in units of 1000bps. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, qeec, max_shaper_rate, 0x10, 0, 28); |
| |
| /* reg_qeec_de |
| * DWRR configuration enable. Enables configuration of the dwrr and |
| * dwrr_weight. |
| * 0 - Disable |
| * 1 - Enable |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, qeec, de, 0x18, 31, 1); |
| |
| /* reg_qeec_dwrr |
| * Transmission selection algorithm to use on the link going down from |
| * the ETS element. |
| * 0 - Strict priority |
| * 1 - DWRR |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, qeec, dwrr, 0x18, 15, 1); |
| |
| /* reg_qeec_dwrr_weight |
| * DWRR weight on the link going down from the ETS element. The |
| * percentage of bandwidth guaranteed to an ETS element within |
| * its hierarchy. The sum of all weights across all ETS elements |
| * within one hierarchy should be equal to 100. Reserved when |
| * transmission selection algorithm is strict priority. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, qeec, dwrr_weight, 0x18, 0, 8); |
| |
| static inline void mlxsw_reg_qeec_pack(char *payload, u8 local_port, |
| enum mlxsw_reg_qeec_hr hr, u8 index, |
| u8 next_index) |
| { |
| MLXSW_REG_ZERO(qeec, payload); |
| mlxsw_reg_qeec_local_port_set(payload, local_port); |
| mlxsw_reg_qeec_element_hierarchy_set(payload, hr); |
| mlxsw_reg_qeec_element_index_set(payload, index); |
| mlxsw_reg_qeec_next_element_index_set(payload, next_index); |
| } |
| |
| /* PMLP - Ports Module to Local Port Register |
| * ------------------------------------------ |
| * Configures the assignment of modules to local ports. |
| */ |
| #define MLXSW_REG_PMLP_ID 0x5002 |
| #define MLXSW_REG_PMLP_LEN 0x40 |
| |
| MLXSW_REG_DEFINE(pmlp, MLXSW_REG_PMLP_ID, MLXSW_REG_PMLP_LEN); |
| |
| /* reg_pmlp_rxtx |
| * 0 - Tx value is used for both Tx and Rx. |
| * 1 - Rx value is taken from a separte field. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pmlp, rxtx, 0x00, 31, 1); |
| |
| /* reg_pmlp_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pmlp, local_port, 0x00, 16, 8); |
| |
| /* reg_pmlp_width |
| * 0 - Unmap local port. |
| * 1 - Lane 0 is used. |
| * 2 - Lanes 0 and 1 are used. |
| * 4 - Lanes 0, 1, 2 and 3 are used. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pmlp, width, 0x00, 0, 8); |
| |
| /* reg_pmlp_module |
| * Module number. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, pmlp, module, 0x04, 0, 8, 0x04, 0x00, false); |
| |
| /* reg_pmlp_tx_lane |
| * Tx Lane. When rxtx field is cleared, this field is used for Rx as well. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 2, 0x04, 0x00, false); |
| |
| /* reg_pmlp_rx_lane |
| * Rx Lane. When rxtx field is cleared, this field is ignored and Rx lane is |
| * equal to Tx lane. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 2, 0x04, 0x00, false); |
| |
| static inline void mlxsw_reg_pmlp_pack(char *payload, u8 local_port) |
| { |
| MLXSW_REG_ZERO(pmlp, payload); |
| mlxsw_reg_pmlp_local_port_set(payload, local_port); |
| } |
| |
| /* PMTU - Port MTU Register |
| * ------------------------ |
| * Configures and reports the port MTU. |
| */ |
| #define MLXSW_REG_PMTU_ID 0x5003 |
| #define MLXSW_REG_PMTU_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(pmtu, MLXSW_REG_PMTU_ID, MLXSW_REG_PMTU_LEN); |
| |
| /* reg_pmtu_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pmtu, local_port, 0x00, 16, 8); |
| |
| /* reg_pmtu_max_mtu |
| * Maximum MTU. |
| * When port type (e.g. Ethernet) is configured, the relevant MTU is |
| * reported, otherwise the minimum between the max_mtu of the different |
| * types is reported. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, pmtu, max_mtu, 0x04, 16, 16); |
| |
| /* reg_pmtu_admin_mtu |
| * MTU value to set port to. Must be smaller or equal to max_mtu. |
| * Note: If port type is Infiniband, then port must be disabled, when its |
| * MTU is set. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pmtu, admin_mtu, 0x08, 16, 16); |
| |
| /* reg_pmtu_oper_mtu |
| * The actual MTU configured on the port. Packets exceeding this size |
| * will be dropped. |
| * Note: In Ethernet and FC oper_mtu == admin_mtu, however, in Infiniband |
| * oper_mtu might be smaller than admin_mtu. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, pmtu, oper_mtu, 0x0C, 16, 16); |
| |
| static inline void mlxsw_reg_pmtu_pack(char *payload, u8 local_port, |
| u16 new_mtu) |
| { |
| MLXSW_REG_ZERO(pmtu, payload); |
| mlxsw_reg_pmtu_local_port_set(payload, local_port); |
| mlxsw_reg_pmtu_max_mtu_set(payload, 0); |
| mlxsw_reg_pmtu_admin_mtu_set(payload, new_mtu); |
| mlxsw_reg_pmtu_oper_mtu_set(payload, 0); |
| } |
| |
| /* PTYS - Port Type and Speed Register |
| * ----------------------------------- |
| * Configures and reports the port speed type. |
| * |
| * Note: When set while the link is up, the changes will not take effect |
| * until the port transitions from down to up state. |
| */ |
| #define MLXSW_REG_PTYS_ID 0x5004 |
| #define MLXSW_REG_PTYS_LEN 0x40 |
| |
| MLXSW_REG_DEFINE(ptys, MLXSW_REG_PTYS_ID, MLXSW_REG_PTYS_LEN); |
| |
| /* reg_ptys_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ptys, local_port, 0x00, 16, 8); |
| |
| #define MLXSW_REG_PTYS_PROTO_MASK_IB BIT(0) |
| #define MLXSW_REG_PTYS_PROTO_MASK_ETH BIT(2) |
| |
| /* reg_ptys_proto_mask |
| * Protocol mask. Indicates which protocol is used. |
| * 0 - Infiniband. |
| * 1 - Fibre Channel. |
| * 2 - Ethernet. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ptys, proto_mask, 0x00, 0, 3); |
| |
| enum { |
| MLXSW_REG_PTYS_AN_STATUS_NA, |
| MLXSW_REG_PTYS_AN_STATUS_OK, |
| MLXSW_REG_PTYS_AN_STATUS_FAIL, |
| }; |
| |
| /* reg_ptys_an_status |
| * Autonegotiation status. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ptys, an_status, 0x04, 28, 4); |
| |
| #define MLXSW_REG_PTYS_ETH_SPEED_SGMII BIT(0) |
| #define MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX BIT(1) |
| #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4 BIT(2) |
| #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4 BIT(3) |
| #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KR BIT(4) |
| #define MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2 BIT(5) |
| #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4 BIT(6) |
| #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_KR4 BIT(7) |
| #define MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4 BIT(8) |
| #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CR BIT(12) |
| #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_SR BIT(13) |
| #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_ER_LR BIT(14) |
| #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_SR4 BIT(15) |
| #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_LR4_ER4 BIT(16) |
| #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_SR2 BIT(18) |
| #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR4 BIT(19) |
| #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 BIT(20) |
| #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 BIT(21) |
| #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 BIT(22) |
| #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4 BIT(23) |
| #define MLXSW_REG_PTYS_ETH_SPEED_100BASE_TX BIT(24) |
| #define MLXSW_REG_PTYS_ETH_SPEED_100BASE_T BIT(25) |
| #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T BIT(26) |
| #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR BIT(27) |
| #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR BIT(28) |
| #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR BIT(29) |
| #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_CR2 BIT(30) |
| #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR2 BIT(31) |
| |
| /* reg_ptys_eth_proto_cap |
| * Ethernet port supported speeds and protocols. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ptys, eth_proto_cap, 0x0C, 0, 32); |
| |
| /* reg_ptys_ib_link_width_cap |
| * IB port supported widths. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ptys, ib_link_width_cap, 0x10, 16, 16); |
| |
| #define MLXSW_REG_PTYS_IB_SPEED_SDR BIT(0) |
| #define MLXSW_REG_PTYS_IB_SPEED_DDR BIT(1) |
| #define MLXSW_REG_PTYS_IB_SPEED_QDR BIT(2) |
| #define MLXSW_REG_PTYS_IB_SPEED_FDR10 BIT(3) |
| #define MLXSW_REG_PTYS_IB_SPEED_FDR BIT(4) |
| #define MLXSW_REG_PTYS_IB_SPEED_EDR BIT(5) |
| |
| /* reg_ptys_ib_proto_cap |
| * IB port supported speeds and protocols. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ptys, ib_proto_cap, 0x10, 0, 16); |
| |
| /* reg_ptys_eth_proto_admin |
| * Speed and protocol to set port to. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ptys, eth_proto_admin, 0x18, 0, 32); |
| |
| /* reg_ptys_ib_link_width_admin |
| * IB width to set port to. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ptys, ib_link_width_admin, 0x1C, 16, 16); |
| |
| /* reg_ptys_ib_proto_admin |
| * IB speeds and protocols to set port to. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ptys, ib_proto_admin, 0x1C, 0, 16); |
| |
| /* reg_ptys_eth_proto_oper |
| * The current speed and protocol configured for the port. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ptys, eth_proto_oper, 0x24, 0, 32); |
| |
| /* reg_ptys_ib_link_width_oper |
| * The current IB width to set port to. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ptys, ib_link_width_oper, 0x28, 16, 16); |
| |
| /* reg_ptys_ib_proto_oper |
| * The current IB speed and protocol. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ptys, ib_proto_oper, 0x28, 0, 16); |
| |
| /* reg_ptys_eth_proto_lp_advertise |
| * The protocols that were advertised by the link partner during |
| * autonegotiation. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ptys, eth_proto_lp_advertise, 0x30, 0, 32); |
| |
| static inline void mlxsw_reg_ptys_eth_pack(char *payload, u8 local_port, |
| u32 proto_admin) |
| { |
| MLXSW_REG_ZERO(ptys, payload); |
| mlxsw_reg_ptys_local_port_set(payload, local_port); |
| mlxsw_reg_ptys_proto_mask_set(payload, MLXSW_REG_PTYS_PROTO_MASK_ETH); |
| mlxsw_reg_ptys_eth_proto_admin_set(payload, proto_admin); |
| } |
| |
| static inline void mlxsw_reg_ptys_eth_unpack(char *payload, |
| u32 *p_eth_proto_cap, |
| u32 *p_eth_proto_adm, |
| u32 *p_eth_proto_oper) |
| { |
| if (p_eth_proto_cap) |
| *p_eth_proto_cap = mlxsw_reg_ptys_eth_proto_cap_get(payload); |
| if (p_eth_proto_adm) |
| *p_eth_proto_adm = mlxsw_reg_ptys_eth_proto_admin_get(payload); |
| if (p_eth_proto_oper) |
| *p_eth_proto_oper = mlxsw_reg_ptys_eth_proto_oper_get(payload); |
| } |
| |
| static inline void mlxsw_reg_ptys_ib_pack(char *payload, u8 local_port, |
| u16 proto_admin, u16 link_width) |
| { |
| MLXSW_REG_ZERO(ptys, payload); |
| mlxsw_reg_ptys_local_port_set(payload, local_port); |
| mlxsw_reg_ptys_proto_mask_set(payload, MLXSW_REG_PTYS_PROTO_MASK_IB); |
| mlxsw_reg_ptys_ib_proto_admin_set(payload, proto_admin); |
| mlxsw_reg_ptys_ib_link_width_admin_set(payload, link_width); |
| } |
| |
| static inline void mlxsw_reg_ptys_ib_unpack(char *payload, u16 *p_ib_proto_cap, |
| u16 *p_ib_link_width_cap, |
| u16 *p_ib_proto_oper, |
| u16 *p_ib_link_width_oper) |
| { |
| if (p_ib_proto_cap) |
| *p_ib_proto_cap = mlxsw_reg_ptys_ib_proto_cap_get(payload); |
| if (p_ib_link_width_cap) |
| *p_ib_link_width_cap = |
| mlxsw_reg_ptys_ib_link_width_cap_get(payload); |
| if (p_ib_proto_oper) |
| *p_ib_proto_oper = mlxsw_reg_ptys_ib_proto_oper_get(payload); |
| if (p_ib_link_width_oper) |
| *p_ib_link_width_oper = |
| mlxsw_reg_ptys_ib_link_width_oper_get(payload); |
| } |
| |
| /* PPAD - Port Physical Address Register |
| * ------------------------------------- |
| * The PPAD register configures the per port physical MAC address. |
| */ |
| #define MLXSW_REG_PPAD_ID 0x5005 |
| #define MLXSW_REG_PPAD_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(ppad, MLXSW_REG_PPAD_ID, MLXSW_REG_PPAD_LEN); |
| |
| /* reg_ppad_single_base_mac |
| * 0: base_mac, local port should be 0 and mac[7:0] is |
| * reserved. HW will set incremental |
| * 1: single_mac - mac of the local_port |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ppad, single_base_mac, 0x00, 28, 1); |
| |
| /* reg_ppad_local_port |
| * port number, if single_base_mac = 0 then local_port is reserved |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ppad, local_port, 0x00, 16, 8); |
| |
| /* reg_ppad_mac |
| * If single_base_mac = 0 - base MAC address, mac[7:0] is reserved. |
| * If single_base_mac = 1 - the per port MAC address |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, ppad, mac, 0x02, 6); |
| |
| static inline void mlxsw_reg_ppad_pack(char *payload, bool single_base_mac, |
| u8 local_port) |
| { |
| MLXSW_REG_ZERO(ppad, payload); |
| mlxsw_reg_ppad_single_base_mac_set(payload, !!single_base_mac); |
| mlxsw_reg_ppad_local_port_set(payload, local_port); |
| } |
| |
| /* PAOS - Ports Administrative and Operational Status Register |
| * ----------------------------------------------------------- |
| * Configures and retrieves per port administrative and operational status. |
| */ |
| #define MLXSW_REG_PAOS_ID 0x5006 |
| #define MLXSW_REG_PAOS_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(paos, MLXSW_REG_PAOS_ID, MLXSW_REG_PAOS_LEN); |
| |
| /* reg_paos_swid |
| * Switch partition ID with which to associate the port. |
| * Note: while external ports uses unique local port numbers (and thus swid is |
| * redundant), router ports use the same local port number where swid is the |
| * only indication for the relevant port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, paos, swid, 0x00, 24, 8); |
| |
| /* reg_paos_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, paos, local_port, 0x00, 16, 8); |
| |
| /* reg_paos_admin_status |
| * Port administrative state (the desired state of the port): |
| * 1 - Up. |
| * 2 - Down. |
| * 3 - Up once. This means that in case of link failure, the port won't go |
| * into polling mode, but will wait to be re-enabled by software. |
| * 4 - Disabled by system. Can only be set by hardware. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, paos, admin_status, 0x00, 8, 4); |
| |
| /* reg_paos_oper_status |
| * Port operational state (the current state): |
| * 1 - Up. |
| * 2 - Down. |
| * 3 - Down by port failure. This means that the device will not let the |
| * port up again until explicitly specified by software. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, paos, oper_status, 0x00, 0, 4); |
| |
| /* reg_paos_ase |
| * Admin state update enabled. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, paos, ase, 0x04, 31, 1); |
| |
| /* reg_paos_ee |
| * Event update enable. If this bit is set, event generation will be |
| * updated based on the e field. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, paos, ee, 0x04, 30, 1); |
| |
| /* reg_paos_e |
| * Event generation on operational state change: |
| * 0 - Do not generate event. |
| * 1 - Generate Event. |
| * 2 - Generate Single Event. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, paos, e, 0x04, 0, 2); |
| |
| static inline void mlxsw_reg_paos_pack(char *payload, u8 local_port, |
| enum mlxsw_port_admin_status status) |
| { |
| MLXSW_REG_ZERO(paos, payload); |
| mlxsw_reg_paos_swid_set(payload, 0); |
| mlxsw_reg_paos_local_port_set(payload, local_port); |
| mlxsw_reg_paos_admin_status_set(payload, status); |
| mlxsw_reg_paos_oper_status_set(payload, 0); |
| mlxsw_reg_paos_ase_set(payload, 1); |
| mlxsw_reg_paos_ee_set(payload, 1); |
| mlxsw_reg_paos_e_set(payload, 1); |
| } |
| |
| /* PFCC - Ports Flow Control Configuration Register |
| * ------------------------------------------------ |
| * Configures and retrieves the per port flow control configuration. |
| */ |
| #define MLXSW_REG_PFCC_ID 0x5007 |
| #define MLXSW_REG_PFCC_LEN 0x20 |
| |
| MLXSW_REG_DEFINE(pfcc, MLXSW_REG_PFCC_ID, MLXSW_REG_PFCC_LEN); |
| |
| /* reg_pfcc_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pfcc, local_port, 0x00, 16, 8); |
| |
| /* reg_pfcc_pnat |
| * Port number access type. Determines the way local_port is interpreted: |
| * 0 - Local port number. |
| * 1 - IB / label port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pfcc, pnat, 0x00, 14, 2); |
| |
| /* reg_pfcc_shl_cap |
| * Send to higher layers capabilities: |
| * 0 - No capability of sending Pause and PFC frames to higher layers. |
| * 1 - Device has capability of sending Pause and PFC frames to higher |
| * layers. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, pfcc, shl_cap, 0x00, 1, 1); |
| |
| /* reg_pfcc_shl_opr |
| * Send to higher layers operation: |
| * 0 - Pause and PFC frames are handled by the port (default). |
| * 1 - Pause and PFC frames are handled by the port and also sent to |
| * higher layers. Only valid if shl_cap = 1. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pfcc, shl_opr, 0x00, 0, 1); |
| |
| /* reg_pfcc_ppan |
| * Pause policy auto negotiation. |
| * 0 - Disabled. Generate / ignore Pause frames based on pptx / pprtx. |
| * 1 - Enabled. When auto-negotiation is performed, set the Pause policy |
| * based on the auto-negotiation resolution. |
| * Access: RW |
| * |
| * Note: The auto-negotiation advertisement is set according to pptx and |
| * pprtx. When PFC is set on Tx / Rx, ppan must be set to 0. |
| */ |
| MLXSW_ITEM32(reg, pfcc, ppan, 0x04, 28, 4); |
| |
| /* reg_pfcc_prio_mask_tx |
| * Bit per priority indicating if Tx flow control policy should be |
| * updated based on bit pfctx. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, pfcc, prio_mask_tx, 0x04, 16, 8); |
| |
| /* reg_pfcc_prio_mask_rx |
| * Bit per priority indicating if Rx flow control policy should be |
| * updated based on bit pfcrx. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, pfcc, prio_mask_rx, 0x04, 0, 8); |
| |
| /* reg_pfcc_pptx |
| * Admin Pause policy on Tx. |
| * 0 - Never generate Pause frames (default). |
| * 1 - Generate Pause frames according to Rx buffer threshold. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pfcc, pptx, 0x08, 31, 1); |
| |
| /* reg_pfcc_aptx |
| * Active (operational) Pause policy on Tx. |
| * 0 - Never generate Pause frames. |
| * 1 - Generate Pause frames according to Rx buffer threshold. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, pfcc, aptx, 0x08, 30, 1); |
| |
| /* reg_pfcc_pfctx |
| * Priority based flow control policy on Tx[7:0]. Per-priority bit mask: |
| * 0 - Never generate priority Pause frames on the specified priority |
| * (default). |
| * 1 - Generate priority Pause frames according to Rx buffer threshold on |
| * the specified priority. |
| * Access: RW |
| * |
| * Note: pfctx and pptx must be mutually exclusive. |
| */ |
| MLXSW_ITEM32(reg, pfcc, pfctx, 0x08, 16, 8); |
| |
| /* reg_pfcc_pprx |
| * Admin Pause policy on Rx. |
| * 0 - Ignore received Pause frames (default). |
| * 1 - Respect received Pause frames. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pfcc, pprx, 0x0C, 31, 1); |
| |
| /* reg_pfcc_aprx |
| * Active (operational) Pause policy on Rx. |
| * 0 - Ignore received Pause frames. |
| * 1 - Respect received Pause frames. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, pfcc, aprx, 0x0C, 30, 1); |
| |
| /* reg_pfcc_pfcrx |
| * Priority based flow control policy on Rx[7:0]. Per-priority bit mask: |
| * 0 - Ignore incoming priority Pause frames on the specified priority |
| * (default). |
| * 1 - Respect incoming priority Pause frames on the specified priority. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pfcc, pfcrx, 0x0C, 16, 8); |
| |
| #define MLXSW_REG_PFCC_ALL_PRIO 0xFF |
| |
| static inline void mlxsw_reg_pfcc_prio_pack(char *payload, u8 pfc_en) |
| { |
| mlxsw_reg_pfcc_prio_mask_tx_set(payload, MLXSW_REG_PFCC_ALL_PRIO); |
| mlxsw_reg_pfcc_prio_mask_rx_set(payload, MLXSW_REG_PFCC_ALL_PRIO); |
| mlxsw_reg_pfcc_pfctx_set(payload, pfc_en); |
| mlxsw_reg_pfcc_pfcrx_set(payload, pfc_en); |
| } |
| |
| static inline void mlxsw_reg_pfcc_pack(char *payload, u8 local_port) |
| { |
| MLXSW_REG_ZERO(pfcc, payload); |
| mlxsw_reg_pfcc_local_port_set(payload, local_port); |
| } |
| |
| /* PPCNT - Ports Performance Counters Register |
| * ------------------------------------------- |
| * The PPCNT register retrieves per port performance counters. |
| */ |
| #define MLXSW_REG_PPCNT_ID 0x5008 |
| #define MLXSW_REG_PPCNT_LEN 0x100 |
| |
| MLXSW_REG_DEFINE(ppcnt, MLXSW_REG_PPCNT_ID, MLXSW_REG_PPCNT_LEN); |
| |
| /* reg_ppcnt_swid |
| * For HCA: must be always 0. |
| * Switch partition ID to associate port with. |
| * Switch partitions are numbered from 0 to 7 inclusively. |
| * Switch partition 254 indicates stacking ports. |
| * Switch partition 255 indicates all switch partitions. |
| * Only valid on Set() operation with local_port=255. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ppcnt, swid, 0x00, 24, 8); |
| |
| /* reg_ppcnt_local_port |
| * Local port number. |
| * 255 indicates all ports on the device, and is only allowed |
| * for Set() operation. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ppcnt, local_port, 0x00, 16, 8); |
| |
| /* reg_ppcnt_pnat |
| * Port number access type: |
| * 0 - Local port number |
| * 1 - IB port number |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ppcnt, pnat, 0x00, 14, 2); |
| |
| enum mlxsw_reg_ppcnt_grp { |
| MLXSW_REG_PPCNT_IEEE_8023_CNT = 0x0, |
| MLXSW_REG_PPCNT_PRIO_CNT = 0x10, |
| MLXSW_REG_PPCNT_TC_CNT = 0x11, |
| }; |
| |
| /* reg_ppcnt_grp |
| * Performance counter group. |
| * Group 63 indicates all groups. Only valid on Set() operation with |
| * clr bit set. |
| * 0x0: IEEE 802.3 Counters |
| * 0x1: RFC 2863 Counters |
| * 0x2: RFC 2819 Counters |
| * 0x3: RFC 3635 Counters |
| * 0x5: Ethernet Extended Counters |
| * 0x8: Link Level Retransmission Counters |
| * 0x10: Per Priority Counters |
| * 0x11: Per Traffic Class Counters |
| * 0x12: Physical Layer Counters |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ppcnt, grp, 0x00, 0, 6); |
| |
| /* reg_ppcnt_clr |
| * Clear counters. Setting the clr bit will reset the counter value |
| * for all counters in the counter group. This bit can be set |
| * for both Set() and Get() operation. |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, ppcnt, clr, 0x04, 31, 1); |
| |
| /* reg_ppcnt_prio_tc |
| * Priority for counter set that support per priority, valid values: 0-7. |
| * Traffic class for counter set that support per traffic class, |
| * valid values: 0- cap_max_tclass-1 . |
| * For HCA: cap_max_tclass is always 8. |
| * Otherwise must be 0. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ppcnt, prio_tc, 0x04, 0, 5); |
| |
| /* Ethernet IEEE 802.3 Counter Group */ |
| |
| /* reg_ppcnt_a_frames_transmitted_ok |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_frames_transmitted_ok, |
| 0x08 + 0x00, 0, 64); |
| |
| /* reg_ppcnt_a_frames_received_ok |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_frames_received_ok, |
| 0x08 + 0x08, 0, 64); |
| |
| /* reg_ppcnt_a_frame_check_sequence_errors |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_frame_check_sequence_errors, |
| 0x08 + 0x10, 0, 64); |
| |
| /* reg_ppcnt_a_alignment_errors |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_alignment_errors, |
| 0x08 + 0x18, 0, 64); |
| |
| /* reg_ppcnt_a_octets_transmitted_ok |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_octets_transmitted_ok, |
| 0x08 + 0x20, 0, 64); |
| |
| /* reg_ppcnt_a_octets_received_ok |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_octets_received_ok, |
| 0x08 + 0x28, 0, 64); |
| |
| /* reg_ppcnt_a_multicast_frames_xmitted_ok |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_xmitted_ok, |
| 0x08 + 0x30, 0, 64); |
| |
| /* reg_ppcnt_a_broadcast_frames_xmitted_ok |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_xmitted_ok, |
| 0x08 + 0x38, 0, 64); |
| |
| /* reg_ppcnt_a_multicast_frames_received_ok |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_received_ok, |
| 0x08 + 0x40, 0, 64); |
| |
| /* reg_ppcnt_a_broadcast_frames_received_ok |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_received_ok, |
| 0x08 + 0x48, 0, 64); |
| |
| /* reg_ppcnt_a_in_range_length_errors |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_in_range_length_errors, |
| 0x08 + 0x50, 0, 64); |
| |
| /* reg_ppcnt_a_out_of_range_length_field |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_out_of_range_length_field, |
| 0x08 + 0x58, 0, 64); |
| |
| /* reg_ppcnt_a_frame_too_long_errors |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_frame_too_long_errors, |
| 0x08 + 0x60, 0, 64); |
| |
| /* reg_ppcnt_a_symbol_error_during_carrier |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_symbol_error_during_carrier, |
| 0x08 + 0x68, 0, 64); |
| |
| /* reg_ppcnt_a_mac_control_frames_transmitted |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_transmitted, |
| 0x08 + 0x70, 0, 64); |
| |
| /* reg_ppcnt_a_mac_control_frames_received |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_received, |
| 0x08 + 0x78, 0, 64); |
| |
| /* reg_ppcnt_a_unsupported_opcodes_received |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_unsupported_opcodes_received, |
| 0x08 + 0x80, 0, 64); |
| |
| /* reg_ppcnt_a_pause_mac_ctrl_frames_received |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_received, |
| 0x08 + 0x88, 0, 64); |
| |
| /* reg_ppcnt_a_pause_mac_ctrl_frames_transmitted |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_transmitted, |
| 0x08 + 0x90, 0, 64); |
| |
| /* Ethernet Per Priority Group Counters */ |
| |
| /* reg_ppcnt_rx_octets |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, rx_octets, 0x08 + 0x00, 0, 64); |
| |
| /* reg_ppcnt_rx_frames |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, rx_frames, 0x08 + 0x20, 0, 64); |
| |
| /* reg_ppcnt_tx_octets |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, tx_octets, 0x08 + 0x28, 0, 64); |
| |
| /* reg_ppcnt_tx_frames |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, tx_frames, 0x08 + 0x48, 0, 64); |
| |
| /* reg_ppcnt_rx_pause |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, rx_pause, 0x08 + 0x50, 0, 64); |
| |
| /* reg_ppcnt_rx_pause_duration |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, rx_pause_duration, 0x08 + 0x58, 0, 64); |
| |
| /* reg_ppcnt_tx_pause |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, tx_pause, 0x08 + 0x60, 0, 64); |
| |
| /* reg_ppcnt_tx_pause_duration |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, tx_pause_duration, 0x08 + 0x68, 0, 64); |
| |
| /* reg_ppcnt_rx_pause_transition |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, tx_pause_transition, 0x08 + 0x70, 0, 64); |
| |
| /* Ethernet Per Traffic Group Counters */ |
| |
| /* reg_ppcnt_tc_transmit_queue |
| * Contains the transmit queue depth in cells of traffic class |
| * selected by prio_tc and the port selected by local_port. |
| * The field cannot be cleared. |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, tc_transmit_queue, 0x08 + 0x00, 0, 64); |
| |
| /* reg_ppcnt_tc_no_buffer_discard_uc |
| * The number of unicast packets dropped due to lack of shared |
| * buffer resources. |
| * Access: RO |
| */ |
| MLXSW_ITEM64(reg, ppcnt, tc_no_buffer_discard_uc, 0x08 + 0x08, 0, 64); |
| |
| static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port, |
| enum mlxsw_reg_ppcnt_grp grp, |
| u8 prio_tc) |
| { |
| MLXSW_REG_ZERO(ppcnt, payload); |
| mlxsw_reg_ppcnt_swid_set(payload, 0); |
| mlxsw_reg_ppcnt_local_port_set(payload, local_port); |
| mlxsw_reg_ppcnt_pnat_set(payload, 0); |
| mlxsw_reg_ppcnt_grp_set(payload, grp); |
| mlxsw_reg_ppcnt_clr_set(payload, 0); |
| mlxsw_reg_ppcnt_prio_tc_set(payload, prio_tc); |
| } |
| |
| /* PLIB - Port Local to InfiniBand Port |
| * ------------------------------------ |
| * The PLIB register performs mapping from Local Port into InfiniBand Port. |
| */ |
| #define MLXSW_REG_PLIB_ID 0x500A |
| #define MLXSW_REG_PLIB_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(plib, MLXSW_REG_PLIB_ID, MLXSW_REG_PLIB_LEN); |
| |
| /* reg_plib_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, plib, local_port, 0x00, 16, 8); |
| |
| /* reg_plib_ib_port |
| * InfiniBand port remapping for local_port. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, plib, ib_port, 0x00, 0, 8); |
| |
| /* PPTB - Port Prio To Buffer Register |
| * ----------------------------------- |
| * Configures the switch priority to buffer table. |
| */ |
| #define MLXSW_REG_PPTB_ID 0x500B |
| #define MLXSW_REG_PPTB_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(pptb, MLXSW_REG_PPTB_ID, MLXSW_REG_PPTB_LEN); |
| |
| enum { |
| MLXSW_REG_PPTB_MM_UM, |
| MLXSW_REG_PPTB_MM_UNICAST, |
| MLXSW_REG_PPTB_MM_MULTICAST, |
| }; |
| |
| /* reg_pptb_mm |
| * Mapping mode. |
| * 0 - Map both unicast and multicast packets to the same buffer. |
| * 1 - Map only unicast packets. |
| * 2 - Map only multicast packets. |
| * Access: Index |
| * |
| * Note: SwitchX-2 only supports the first option. |
| */ |
| MLXSW_ITEM32(reg, pptb, mm, 0x00, 28, 2); |
| |
| /* reg_pptb_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pptb, local_port, 0x00, 16, 8); |
| |
| /* reg_pptb_um |
| * Enables the update of the untagged_buf field. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pptb, um, 0x00, 8, 1); |
| |
| /* reg_pptb_pm |
| * Enables the update of the prio_to_buff field. |
| * Bit <i> is a flag for updating the mapping for switch priority <i>. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pptb, pm, 0x00, 0, 8); |
| |
| /* reg_pptb_prio_to_buff |
| * Mapping of switch priority <i> to one of the allocated receive port |
| * buffers. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, pptb, prio_to_buff, 0x04, 0x04, 4); |
| |
| /* reg_pptb_pm_msb |
| * Enables the update of the prio_to_buff field. |
| * Bit <i> is a flag for updating the mapping for switch priority <i+8>. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pptb, pm_msb, 0x08, 24, 8); |
| |
| /* reg_pptb_untagged_buff |
| * Mapping of untagged frames to one of the allocated receive port buffers. |
| * Access: RW |
| * |
| * Note: In SwitchX-2 this field must be mapped to buffer 8. Reserved for |
| * Spectrum, as it maps untagged packets based on the default switch priority. |
| */ |
| MLXSW_ITEM32(reg, pptb, untagged_buff, 0x08, 0, 4); |
| |
| /* reg_pptb_prio_to_buff_msb |
| * Mapping of switch priority <i+8> to one of the allocated receive port |
| * buffers. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, pptb, prio_to_buff_msb, 0x0C, 0x04, 4); |
| |
| #define MLXSW_REG_PPTB_ALL_PRIO 0xFF |
| |
| static inline void mlxsw_reg_pptb_pack(char *payload, u8 local_port) |
| { |
| MLXSW_REG_ZERO(pptb, payload); |
| mlxsw_reg_pptb_mm_set(payload, MLXSW_REG_PPTB_MM_UM); |
| mlxsw_reg_pptb_local_port_set(payload, local_port); |
| mlxsw_reg_pptb_pm_set(payload, MLXSW_REG_PPTB_ALL_PRIO); |
| mlxsw_reg_pptb_pm_msb_set(payload, MLXSW_REG_PPTB_ALL_PRIO); |
| } |
| |
| static inline void mlxsw_reg_pptb_prio_to_buff_pack(char *payload, u8 prio, |
| u8 buff) |
| { |
| mlxsw_reg_pptb_prio_to_buff_set(payload, prio, buff); |
| mlxsw_reg_pptb_prio_to_buff_msb_set(payload, prio, buff); |
| } |
| |
| /* PBMC - Port Buffer Management Control Register |
| * ---------------------------------------------- |
| * The PBMC register configures and retrieves the port packet buffer |
| * allocation for different Prios, and the Pause threshold management. |
| */ |
| #define MLXSW_REG_PBMC_ID 0x500C |
| #define MLXSW_REG_PBMC_LEN 0x6C |
| |
| MLXSW_REG_DEFINE(pbmc, MLXSW_REG_PBMC_ID, MLXSW_REG_PBMC_LEN); |
| |
| /* reg_pbmc_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pbmc, local_port, 0x00, 16, 8); |
| |
| /* reg_pbmc_xoff_timer_value |
| * When device generates a pause frame, it uses this value as the pause |
| * timer (time for the peer port to pause in quota-512 bit time). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pbmc, xoff_timer_value, 0x04, 16, 16); |
| |
| /* reg_pbmc_xoff_refresh |
| * The time before a new pause frame should be sent to refresh the pause RW |
| * state. Using the same units as xoff_timer_value above (in quota-512 bit |
| * time). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pbmc, xoff_refresh, 0x04, 0, 16); |
| |
| #define MLXSW_REG_PBMC_PORT_SHARED_BUF_IDX 11 |
| |
| /* reg_pbmc_buf_lossy |
| * The field indicates if the buffer is lossy. |
| * 0 - Lossless |
| * 1 - Lossy |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, pbmc, buf_lossy, 0x0C, 25, 1, 0x08, 0x00, false); |
| |
| /* reg_pbmc_buf_epsb |
| * Eligible for Port Shared buffer. |
| * If epsb is set, packets assigned to buffer are allowed to insert the port |
| * shared buffer. |
| * When buf_lossy is MLXSW_REG_PBMC_LOSSY_LOSSY this field is reserved. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, pbmc, buf_epsb, 0x0C, 24, 1, 0x08, 0x00, false); |
| |
| /* reg_pbmc_buf_size |
| * The part of the packet buffer array is allocated for the specific buffer. |
| * Units are represented in cells. |
| * Access: RW |
| */ |
| MLXSW_ITEM32_INDEXED(reg, pbmc, buf_size, 0x0C, 0, 16, 0x08, 0x00, false); |
| |
| /* reg_pbmc_buf_xoff_threshold |
| * Once the amount of data in the buffer goes above this value, device |
| * starts sending PFC frames for all priorities associated with the |
| * buffer. Units are represented in cells. Reserved in case of lossy |
| * buffer. |
| * Access: RW |
| * |
| * Note: In Spectrum, reserved for buffer[9]. |
| */ |
| MLXSW_ITEM32_INDEXED(reg, pbmc, buf_xoff_threshold, 0x0C, 16, 16, |
| 0x08, 0x04, false); |
| |
| /* reg_pbmc_buf_xon_threshold |
| * When the amount of data in the buffer goes below this value, device |
| * stops sending PFC frames for the priorities associated with the |
| * buffer. Units are represented in cells. Reserved in case of lossy |
| * buffer. |
| * Access: RW |
| * |
| * Note: In Spectrum, reserved for buffer[9]. |
| */ |
| MLXSW_ITEM32_INDEXED(reg, pbmc, buf_xon_threshold, 0x0C, 0, 16, |
| 0x08, 0x04, false); |
| |
| static inline void mlxsw_reg_pbmc_pack(char *payload, u8 local_port, |
| u16 xoff_timer_value, u16 xoff_refresh) |
| { |
| MLXSW_REG_ZERO(pbmc, payload); |
| mlxsw_reg_pbmc_local_port_set(payload, local_port); |
| mlxsw_reg_pbmc_xoff_timer_value_set(payload, xoff_timer_value); |
| mlxsw_reg_pbmc_xoff_refresh_set(payload, xoff_refresh); |
| } |
| |
| static inline void mlxsw_reg_pbmc_lossy_buffer_pack(char *payload, |
| int buf_index, |
| u16 size) |
| { |
| mlxsw_reg_pbmc_buf_lossy_set(payload, buf_index, 1); |
| mlxsw_reg_pbmc_buf_epsb_set(payload, buf_index, 0); |
| mlxsw_reg_pbmc_buf_size_set(payload, buf_index, size); |
| } |
| |
| static inline void mlxsw_reg_pbmc_lossless_buffer_pack(char *payload, |
| int buf_index, u16 size, |
| u16 threshold) |
| { |
| mlxsw_reg_pbmc_buf_lossy_set(payload, buf_index, 0); |
| mlxsw_reg_pbmc_buf_epsb_set(payload, buf_index, 0); |
| mlxsw_reg_pbmc_buf_size_set(payload, buf_index, size); |
| mlxsw_reg_pbmc_buf_xoff_threshold_set(payload, buf_index, threshold); |
| mlxsw_reg_pbmc_buf_xon_threshold_set(payload, buf_index, threshold); |
| } |
| |
| /* PSPA - Port Switch Partition Allocation |
| * --------------------------------------- |
| * Controls the association of a port with a switch partition and enables |
| * configuring ports as stacking ports. |
| */ |
| #define MLXSW_REG_PSPA_ID 0x500D |
| #define MLXSW_REG_PSPA_LEN 0x8 |
| |
| MLXSW_REG_DEFINE(pspa, MLXSW_REG_PSPA_ID, MLXSW_REG_PSPA_LEN); |
| |
| /* reg_pspa_swid |
| * Switch partition ID. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, pspa, swid, 0x00, 24, 8); |
| |
| /* reg_pspa_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pspa, local_port, 0x00, 16, 8); |
| |
| /* reg_pspa_sub_port |
| * Virtual port within the local port. Set to 0 when virtual ports are |
| * disabled on the local port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pspa, sub_port, 0x00, 8, 8); |
| |
| static inline void mlxsw_reg_pspa_pack(char *payload, u8 swid, u8 local_port) |
| { |
| MLXSW_REG_ZERO(pspa, payload); |
| mlxsw_reg_pspa_swid_set(payload, swid); |
| mlxsw_reg_pspa_local_port_set(payload, local_port); |
| mlxsw_reg_pspa_sub_port_set(payload, 0); |
| } |
| |
| /* HTGT - Host Trap Group Table |
| * ---------------------------- |
| * Configures the properties for forwarding to CPU. |
| */ |
| #define MLXSW_REG_HTGT_ID 0x7002 |
| #define MLXSW_REG_HTGT_LEN 0x20 |
| |
| MLXSW_REG_DEFINE(htgt, MLXSW_REG_HTGT_ID, MLXSW_REG_HTGT_LEN); |
| |
| /* reg_htgt_swid |
| * Switch partition ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, htgt, swid, 0x00, 24, 8); |
| |
| #define MLXSW_REG_HTGT_PATH_TYPE_LOCAL 0x0 /* For locally attached CPU */ |
| |
| /* reg_htgt_type |
| * CPU path type. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, htgt, type, 0x00, 8, 4); |
| |
| enum mlxsw_reg_htgt_trap_group { |
| MLXSW_REG_HTGT_TRAP_GROUP_EMAD, |
| MLXSW_REG_HTGT_TRAP_GROUP_SX2_RX, |
| MLXSW_REG_HTGT_TRAP_GROUP_SX2_CTRL, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_STP, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_LACP, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_LLDP, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_IGMP, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_BGP_IPV4, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_OSPF, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_ARP, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_ARP_MISS, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_ROUTER_EXP, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_REMOTE_ROUTE, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_IP2ME, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_DHCP, |
| MLXSW_REG_HTGT_TRAP_GROUP_SP_EVENT, |
| }; |
| |
| /* reg_htgt_trap_group |
| * Trap group number. User defined number specifying which trap groups |
| * should be forwarded to the CPU. The mapping between trap IDs and trap |
| * groups is configured using HPKT register. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, htgt, trap_group, 0x00, 0, 8); |
| |
| enum { |
| MLXSW_REG_HTGT_POLICER_DISABLE, |
| MLXSW_REG_HTGT_POLICER_ENABLE, |
| }; |
| |
| /* reg_htgt_pide |
| * Enable policer ID specified using 'pid' field. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, htgt, pide, 0x04, 15, 1); |
| |
| #define MLXSW_REG_HTGT_INVALID_POLICER 0xff |
| |
| /* reg_htgt_pid |
| * Policer ID for the trap group. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, htgt, pid, 0x04, 0, 8); |
| |
| #define MLXSW_REG_HTGT_TRAP_TO_CPU 0x0 |
| |
| /* reg_htgt_mirror_action |
| * Mirror action to use. |
| * 0 - Trap to CPU. |
| * 1 - Trap to CPU and mirror to a mirroring agent. |
| * 2 - Mirror to a mirroring agent and do not trap to CPU. |
| * Access: RW |
| * |
| * Note: Mirroring to a mirroring agent is only supported in Spectrum. |
| */ |
| MLXSW_ITEM32(reg, htgt, mirror_action, 0x08, 8, 2); |
| |
| /* reg_htgt_mirroring_agent |
| * Mirroring agent. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, htgt, mirroring_agent, 0x08, 0, 3); |
| |
| #define MLXSW_REG_HTGT_DEFAULT_PRIORITY 0 |
| |
| /* reg_htgt_priority |
| * Trap group priority. |
| * In case a packet matches multiple classification rules, the packet will |
| * only be trapped once, based on the trap ID associated with the group (via |
| * register HPKT) with the highest priority. |
| * Supported values are 0-7, with 7 represnting the highest priority. |
| * Access: RW |
| * |
| * Note: In SwitchX-2 this field is ignored and the priority value is replaced |
| * by the 'trap_group' field. |
| */ |
| MLXSW_ITEM32(reg, htgt, priority, 0x0C, 0, 4); |
| |
| #define MLXSW_REG_HTGT_DEFAULT_TC 7 |
| |
| /* reg_htgt_local_path_cpu_tclass |
| * CPU ingress traffic class for the trap group. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, htgt, local_path_cpu_tclass, 0x10, 16, 6); |
| |
| enum mlxsw_reg_htgt_local_path_rdq { |
| MLXSW_REG_HTGT_LOCAL_PATH_RDQ_SX2_CTRL = 0x13, |
| MLXSW_REG_HTGT_LOCAL_PATH_RDQ_SX2_RX = 0x14, |
| MLXSW_REG_HTGT_LOCAL_PATH_RDQ_SX2_EMAD = 0x15, |
| MLXSW_REG_HTGT_LOCAL_PATH_RDQ_SIB_EMAD = 0x15, |
| }; |
| /* reg_htgt_local_path_rdq |
| * Receive descriptor queue (RDQ) to use for the trap group. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, htgt, local_path_rdq, 0x10, 0, 6); |
| |
| static inline void mlxsw_reg_htgt_pack(char *payload, u8 group, u8 policer_id, |
| u8 priority, u8 tc) |
| { |
| MLXSW_REG_ZERO(htgt, payload); |
| |
| if (policer_id == MLXSW_REG_HTGT_INVALID_POLICER) { |
| mlxsw_reg_htgt_pide_set(payload, |
| MLXSW_REG_HTGT_POLICER_DISABLE); |
| } else { |
| mlxsw_reg_htgt_pide_set(payload, |
| MLXSW_REG_HTGT_POLICER_ENABLE); |
| mlxsw_reg_htgt_pid_set(payload, policer_id); |
| } |
| |
| mlxsw_reg_htgt_type_set(payload, MLXSW_REG_HTGT_PATH_TYPE_LOCAL); |
| mlxsw_reg_htgt_trap_group_set(payload, group); |
| mlxsw_reg_htgt_mirror_action_set(payload, MLXSW_REG_HTGT_TRAP_TO_CPU); |
| mlxsw_reg_htgt_mirroring_agent_set(payload, 0); |
| mlxsw_reg_htgt_priority_set(payload, priority); |
| mlxsw_reg_htgt_local_path_cpu_tclass_set(payload, tc); |
| mlxsw_reg_htgt_local_path_rdq_set(payload, group); |
| } |
| |
| /* HPKT - Host Packet Trap |
| * ----------------------- |
| * Configures trap IDs inside trap groups. |
| */ |
| #define MLXSW_REG_HPKT_ID 0x7003 |
| #define MLXSW_REG_HPKT_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(hpkt, MLXSW_REG_HPKT_ID, MLXSW_REG_HPKT_LEN); |
| |
| enum { |
| MLXSW_REG_HPKT_ACK_NOT_REQUIRED, |
| MLXSW_REG_HPKT_ACK_REQUIRED, |
| }; |
| |
| /* reg_hpkt_ack |
| * Require acknowledgements from the host for events. |
| * If set, then the device will wait for the event it sent to be acknowledged |
| * by the host. This option is only relevant for event trap IDs. |
| * Access: RW |
| * |
| * Note: Currently not supported by firmware. |
| */ |
| MLXSW_ITEM32(reg, hpkt, ack, 0x00, 24, 1); |
| |
| enum mlxsw_reg_hpkt_action { |
| MLXSW_REG_HPKT_ACTION_FORWARD, |
| MLXSW_REG_HPKT_ACTION_TRAP_TO_CPU, |
| MLXSW_REG_HPKT_ACTION_MIRROR_TO_CPU, |
| MLXSW_REG_HPKT_ACTION_DISCARD, |
| MLXSW_REG_HPKT_ACTION_SOFT_DISCARD, |
| MLXSW_REG_HPKT_ACTION_TRAP_AND_SOFT_DISCARD, |
| }; |
| |
| /* reg_hpkt_action |
| * Action to perform on packet when trapped. |
| * 0 - No action. Forward to CPU based on switching rules. |
| * 1 - Trap to CPU (CPU receives sole copy). |
| * 2 - Mirror to CPU (CPU receives a replica of the packet). |
| * 3 - Discard. |
| * 4 - Soft discard (allow other traps to act on the packet). |
| * 5 - Trap and soft discard (allow other traps to overwrite this trap). |
| * Access: RW |
| * |
| * Note: Must be set to 0 (forward) for event trap IDs, as they are already |
| * addressed to the CPU. |
| */ |
| MLXSW_ITEM32(reg, hpkt, action, 0x00, 20, 3); |
| |
| /* reg_hpkt_trap_group |
| * Trap group to associate the trap with. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, hpkt, trap_group, 0x00, 12, 6); |
| |
| /* reg_hpkt_trap_id |
| * Trap ID. |
| * Access: Index |
| * |
| * Note: A trap ID can only be associated with a single trap group. The device |
| * will associate the trap ID with the last trap group configured. |
| */ |
| MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 9); |
| |
| enum { |
| MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT, |
| MLXSW_REG_HPKT_CTRL_PACKET_NO_BUFFER, |
| MLXSW_REG_HPKT_CTRL_PACKET_USE_BUFFER, |
| }; |
| |
| /* reg_hpkt_ctrl |
| * Configure dedicated buffer resources for control packets. |
| * Ignored by SwitchX-2. |
| * 0 - Keep factory defaults. |
| * 1 - Do not use control buffer for this trap ID. |
| * 2 - Use control buffer for this trap ID. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, hpkt, ctrl, 0x04, 16, 2); |
| |
| static inline void mlxsw_reg_hpkt_pack(char *payload, u8 action, u16 trap_id, |
| enum mlxsw_reg_htgt_trap_group trap_group, |
| bool is_ctrl) |
| { |
| MLXSW_REG_ZERO(hpkt, payload); |
| mlxsw_reg_hpkt_ack_set(payload, MLXSW_REG_HPKT_ACK_NOT_REQUIRED); |
| mlxsw_reg_hpkt_action_set(payload, action); |
| mlxsw_reg_hpkt_trap_group_set(payload, trap_group); |
| mlxsw_reg_hpkt_trap_id_set(payload, trap_id); |
| mlxsw_reg_hpkt_ctrl_set(payload, is_ctrl ? |
| MLXSW_REG_HPKT_CTRL_PACKET_USE_BUFFER : |
| MLXSW_REG_HPKT_CTRL_PACKET_NO_BUFFER); |
| } |
| |
| /* RGCR - Router General Configuration Register |
| * -------------------------------------------- |
| * The register is used for setting up the router configuration. |
| */ |
| #define MLXSW_REG_RGCR_ID 0x8001 |
| #define MLXSW_REG_RGCR_LEN 0x28 |
| |
| MLXSW_REG_DEFINE(rgcr, MLXSW_REG_RGCR_ID, MLXSW_REG_RGCR_LEN); |
| |
| /* reg_rgcr_ipv4_en |
| * IPv4 router enable. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, rgcr, ipv4_en, 0x00, 31, 1); |
| |
| /* reg_rgcr_ipv6_en |
| * IPv6 router enable. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, rgcr, ipv6_en, 0x00, 30, 1); |
| |
| /* reg_rgcr_max_router_interfaces |
| * Defines the maximum number of active router interfaces for all virtual |
| * routers. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, rgcr, max_router_interfaces, 0x10, 0, 16); |
| |
| /* reg_rgcr_usp |
| * Update switch priority and packet color. |
| * 0 - Preserve the value of Switch Priority and packet color. |
| * 1 - Recalculate the value of Switch Priority and packet color. |
| * Access: RW |
| * |
| * Note: Not supported by SwitchX and SwitchX-2. |
| */ |
| MLXSW_ITEM32(reg, rgcr, usp, 0x18, 20, 1); |
| |
| /* reg_rgcr_pcp_rw |
| * Indicates how to handle the pcp_rewrite_en value: |
| * 0 - Preserve the value of pcp_rewrite_en. |
| * 2 - Disable PCP rewrite. |
| * 3 - Enable PCP rewrite. |
| * Access: RW |
| * |
| * Note: Not supported by SwitchX and SwitchX-2. |
| */ |
| MLXSW_ITEM32(reg, rgcr, pcp_rw, 0x18, 16, 2); |
| |
| /* reg_rgcr_activity_dis |
| * Activity disable: |
| * 0 - Activity will be set when an entry is hit (default). |
| * 1 - Activity will not be set when an entry is hit. |
| * |
| * Bit 0 - Disable activity bit in Router Algorithmic LPM Unicast Entry |
| * (RALUE). |
| * Bit 1 - Disable activity bit in Router Algorithmic LPM Unicast Host |
| * Entry (RAUHT). |
| * Bits 2:7 are reserved. |
| * Access: RW |
| * |
| * Note: Not supported by SwitchX, SwitchX-2 and Switch-IB. |
| */ |
| MLXSW_ITEM32(reg, rgcr, activity_dis, 0x20, 0, 8); |
| |
| static inline void mlxsw_reg_rgcr_pack(char *payload, bool ipv4_en) |
| { |
| MLXSW_REG_ZERO(rgcr, payload); |
| mlxsw_reg_rgcr_ipv4_en_set(payload, ipv4_en); |
| } |
| |
| /* RITR - Router Interface Table Register |
| * -------------------------------------- |
| * The register is used to configure the router interface table. |
| */ |
| #define MLXSW_REG_RITR_ID 0x8002 |
| #define MLXSW_REG_RITR_LEN 0x40 |
| |
| MLXSW_REG_DEFINE(ritr, MLXSW_REG_RITR_ID, MLXSW_REG_RITR_LEN); |
| |
| /* reg_ritr_enable |
| * Enables routing on the router interface. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, enable, 0x00, 31, 1); |
| |
| /* reg_ritr_ipv4 |
| * IPv4 routing enable. Enables routing of IPv4 traffic on the router |
| * interface. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, ipv4, 0x00, 29, 1); |
| |
| /* reg_ritr_ipv6 |
| * IPv6 routing enable. Enables routing of IPv6 traffic on the router |
| * interface. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, ipv6, 0x00, 28, 1); |
| |
| enum mlxsw_reg_ritr_if_type { |
| MLXSW_REG_RITR_VLAN_IF, |
| MLXSW_REG_RITR_FID_IF, |
| MLXSW_REG_RITR_SP_IF, |
| }; |
| |
| /* reg_ritr_type |
| * Router interface type. |
| * 0 - VLAN interface. |
| * 1 - FID interface. |
| * 2 - Sub-port interface. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, type, 0x00, 23, 3); |
| |
| enum { |
| MLXSW_REG_RITR_RIF_CREATE, |
| MLXSW_REG_RITR_RIF_DEL, |
| }; |
| |
| /* reg_ritr_op |
| * Opcode: |
| * 0 - Create or edit RIF. |
| * 1 - Delete RIF. |
| * Reserved for SwitchX-2. For Spectrum, editing of interface properties |
| * is not supported. An interface must be deleted and re-created in order |
| * to update properties. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, ritr, op, 0x00, 20, 2); |
| |
| /* reg_ritr_rif |
| * Router interface index. A pointer to the Router Interface Table. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ritr, rif, 0x00, 0, 16); |
| |
| /* reg_ritr_ipv4_fe |
| * IPv4 Forwarding Enable. |
| * Enables routing of IPv4 traffic on the router interface. When disabled, |
| * forwarding is blocked but local traffic (traps and IP2ME) will be enabled. |
| * Not supported in SwitchX-2. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, ipv4_fe, 0x04, 29, 1); |
| |
| /* reg_ritr_ipv6_fe |
| * IPv6 Forwarding Enable. |
| * Enables routing of IPv6 traffic on the router interface. When disabled, |
| * forwarding is blocked but local traffic (traps and IP2ME) will be enabled. |
| * Not supported in SwitchX-2. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, ipv6_fe, 0x04, 28, 1); |
| |
| /* reg_ritr_lb_en |
| * Loop-back filter enable for unicast packets. |
| * If the flag is set then loop-back filter for unicast packets is |
| * implemented on the RIF. Multicast packets are always subject to |
| * loop-back filtering. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, lb_en, 0x04, 24, 1); |
| |
| /* reg_ritr_virtual_router |
| * Virtual router ID associated with the router interface. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, virtual_router, 0x04, 0, 16); |
| |
| /* reg_ritr_mtu |
| * Router interface MTU. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, mtu, 0x34, 0, 16); |
| |
| /* reg_ritr_if_swid |
| * Switch partition ID. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, if_swid, 0x08, 24, 8); |
| |
| /* reg_ritr_if_mac |
| * Router interface MAC address. |
| * In Spectrum, all MAC addresses must have the same 38 MSBits. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, ritr, if_mac, 0x12, 6); |
| |
| /* VLAN Interface */ |
| |
| /* reg_ritr_vlan_if_vid |
| * VLAN ID. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, vlan_if_vid, 0x08, 0, 12); |
| |
| /* FID Interface */ |
| |
| /* reg_ritr_fid_if_fid |
| * Filtering ID. Used to connect a bridge to the router. Only FIDs from |
| * the vFID range are supported. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, fid_if_fid, 0x08, 0, 16); |
| |
| static inline void mlxsw_reg_ritr_fid_set(char *payload, |
| enum mlxsw_reg_ritr_if_type rif_type, |
| u16 fid) |
| { |
| if (rif_type == MLXSW_REG_RITR_FID_IF) |
| mlxsw_reg_ritr_fid_if_fid_set(payload, fid); |
| else |
| mlxsw_reg_ritr_vlan_if_vid_set(payload, fid); |
| } |
| |
| /* Sub-port Interface */ |
| |
| /* reg_ritr_sp_if_lag |
| * LAG indication. When this bit is set the system_port field holds the |
| * LAG identifier. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, sp_if_lag, 0x08, 24, 1); |
| |
| /* reg_ritr_sp_system_port |
| * Port unique indentifier. When lag bit is set, this field holds the |
| * lag_id in bits 0:9. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, sp_if_system_port, 0x08, 0, 16); |
| |
| /* reg_ritr_sp_if_vid |
| * VLAN ID. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ritr, sp_if_vid, 0x18, 0, 12); |
| |
| static inline void mlxsw_reg_ritr_rif_pack(char *payload, u16 rif) |
| { |
| MLXSW_REG_ZERO(ritr, payload); |
| mlxsw_reg_ritr_rif_set(payload, rif); |
| } |
| |
| static inline void mlxsw_reg_ritr_sp_if_pack(char *payload, bool lag, |
| u16 system_port, u16 vid) |
| { |
| mlxsw_reg_ritr_sp_if_lag_set(payload, lag); |
| mlxsw_reg_ritr_sp_if_system_port_set(payload, system_port); |
| mlxsw_reg_ritr_sp_if_vid_set(payload, vid); |
| } |
| |
| static inline void mlxsw_reg_ritr_pack(char *payload, bool enable, |
| enum mlxsw_reg_ritr_if_type type, |
| u16 rif, u16 mtu, const char *mac) |
| { |
| bool op = enable ? MLXSW_REG_RITR_RIF_CREATE : MLXSW_REG_RITR_RIF_DEL; |
| |
| MLXSW_REG_ZERO(ritr, payload); |
| mlxsw_reg_ritr_enable_set(payload, enable); |
| mlxsw_reg_ritr_ipv4_set(payload, 1); |
| mlxsw_reg_ritr_type_set(payload, type); |
| mlxsw_reg_ritr_op_set(payload, op); |
| mlxsw_reg_ritr_rif_set(payload, rif); |
| mlxsw_reg_ritr_ipv4_fe_set(payload, 1); |
| mlxsw_reg_ritr_lb_en_set(payload, 1); |
| mlxsw_reg_ritr_mtu_set(payload, mtu); |
| mlxsw_reg_ritr_if_mac_memcpy_to(payload, mac); |
| } |
| |
| /* RATR - Router Adjacency Table Register |
| * -------------------------------------- |
| * The RATR register is used to configure the Router Adjacency (next-hop) |
| * Table. |
| */ |
| #define MLXSW_REG_RATR_ID 0x8008 |
| #define MLXSW_REG_RATR_LEN 0x2C |
| |
| MLXSW_REG_DEFINE(ratr, MLXSW_REG_RATR_ID, MLXSW_REG_RATR_LEN); |
| |
| enum mlxsw_reg_ratr_op { |
| /* Read */ |
| MLXSW_REG_RATR_OP_QUERY_READ = 0, |
| /* Read and clear activity */ |
| MLXSW_REG_RATR_OP_QUERY_READ_CLEAR = 2, |
| /* Write Adjacency entry */ |
| MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY = 1, |
| /* Write Adjacency entry only if the activity is cleared. |
| * The write may not succeed if the activity is set. There is not |
| * direct feedback if the write has succeeded or not, however |
| * the get will reveal the actual entry (SW can compare the get |
| * response to the set command). |
| */ |
| MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY_ON_ACTIVITY = 3, |
| }; |
| |
| /* reg_ratr_op |
| * Note that Write operation may also be used for updating |
| * counter_set_type and counter_index. In this case all other |
| * fields must not be updated. |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, ratr, op, 0x00, 28, 4); |
| |
| /* reg_ratr_v |
| * Valid bit. Indicates if the adjacency entry is valid. |
| * Note: the device may need some time before reusing an invalidated |
| * entry. During this time the entry can not be reused. It is |
| * recommended to use another entry before reusing an invalidated |
| * entry (e.g. software can put it at the end of the list for |
| * reusing). Trying to access an invalidated entry not yet cleared |
| * by the device results with failure indicating "Try Again" status. |
| * When valid is '0' then egress_router_interface,trap_action, |
| * adjacency_parameters and counters are reserved |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ratr, v, 0x00, 24, 1); |
| |
| /* reg_ratr_a |
| * Activity. Set for new entries. Set if a packet lookup has hit on |
| * the specific entry. To clear the a bit, use "clear activity". |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ratr, a, 0x00, 16, 1); |
| |
| /* reg_ratr_adjacency_index_low |
| * Bits 15:0 of index into the adjacency table. |
| * For SwitchX and SwitchX-2, the adjacency table is linear and |
| * used for adjacency entries only. |
| * For Spectrum, the index is to the KVD linear. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ratr, adjacency_index_low, 0x04, 0, 16); |
| |
| /* reg_ratr_egress_router_interface |
| * Range is 0 .. cap_max_router_interfaces - 1 |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ratr, egress_router_interface, 0x08, 0, 16); |
| |
| enum mlxsw_reg_ratr_trap_action { |
| MLXSW_REG_RATR_TRAP_ACTION_NOP, |
| MLXSW_REG_RATR_TRAP_ACTION_TRAP, |
| MLXSW_REG_RATR_TRAP_ACTION_MIRROR_TO_CPU, |
| MLXSW_REG_RATR_TRAP_ACTION_MIRROR, |
| MLXSW_REG_RATR_TRAP_ACTION_DISCARD_ERRORS, |
| }; |
| |
| /* reg_ratr_trap_action |
| * see mlxsw_reg_ratr_trap_action |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ratr, trap_action, 0x0C, 28, 4); |
| |
| enum mlxsw_reg_ratr_trap_id { |
| MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS0 = 0, |
| MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS1 = 1, |
| }; |
| |
| /* reg_ratr_adjacency_index_high |
| * Bits 23:16 of the adjacency_index. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ratr, adjacency_index_high, 0x0C, 16, 8); |
| |
| /* reg_ratr_trap_id |
| * Trap ID to be reported to CPU. |
| * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1. |
| * For trap_action of NOP, MIRROR and DISCARD_ERROR |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ratr, trap_id, 0x0C, 0, 8); |
| |
| /* reg_ratr_eth_destination_mac |
| * MAC address of the destination next-hop. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, ratr, eth_destination_mac, 0x12, 6); |
| |
| static inline void |
| mlxsw_reg_ratr_pack(char *payload, |
| enum mlxsw_reg_ratr_op op, bool valid, |
| u32 adjacency_index, u16 egress_rif) |
| { |
| MLXSW_REG_ZERO(ratr, payload); |
| mlxsw_reg_ratr_op_set(payload, op); |
| mlxsw_reg_ratr_v_set(payload, valid); |
| mlxsw_reg_ratr_adjacency_index_low_set(payload, adjacency_index); |
| mlxsw_reg_ratr_adjacency_index_high_set(payload, adjacency_index >> 16); |
| mlxsw_reg_ratr_egress_router_interface_set(payload, egress_rif); |
| } |
| |
| static inline void mlxsw_reg_ratr_eth_entry_pack(char *payload, |
| const char *dest_mac) |
| { |
| mlxsw_reg_ratr_eth_destination_mac_memcpy_to(payload, dest_mac); |
| } |
| |
| /* RALTA - Router Algorithmic LPM Tree Allocation Register |
| * ------------------------------------------------------- |
| * RALTA is used to allocate the LPM trees of the SHSPM method. |
| */ |
| #define MLXSW_REG_RALTA_ID 0x8010 |
| #define MLXSW_REG_RALTA_LEN 0x04 |
| |
| MLXSW_REG_DEFINE(ralta, MLXSW_REG_RALTA_ID, MLXSW_REG_RALTA_LEN); |
| |
| /* reg_ralta_op |
| * opcode (valid for Write, must be 0 on Read) |
| * 0 - allocate a tree |
| * 1 - deallocate a tree |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, ralta, op, 0x00, 28, 2); |
| |
| enum mlxsw_reg_ralxx_protocol { |
| MLXSW_REG_RALXX_PROTOCOL_IPV4, |
| MLXSW_REG_RALXX_PROTOCOL_IPV6, |
| }; |
| |
| /* reg_ralta_protocol |
| * Protocol. |
| * Deallocation opcode: Reserved. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralta, protocol, 0x00, 24, 4); |
| |
| /* reg_ralta_tree_id |
| * An identifier (numbered from 1..cap_shspm_max_trees-1) representing |
| * the tree identifier (managed by software). |
| * Note that tree_id 0 is allocated for a default-route tree. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ralta, tree_id, 0x00, 0, 8); |
| |
| static inline void mlxsw_reg_ralta_pack(char *payload, bool alloc, |
| enum mlxsw_reg_ralxx_protocol protocol, |
| u8 tree_id) |
| { |
| MLXSW_REG_ZERO(ralta, payload); |
| mlxsw_reg_ralta_op_set(payload, !alloc); |
| mlxsw_reg_ralta_protocol_set(payload, protocol); |
| mlxsw_reg_ralta_tree_id_set(payload, tree_id); |
| } |
| |
| /* RALST - Router Algorithmic LPM Structure Tree Register |
| * ------------------------------------------------------ |
| * RALST is used to set and query the structure of an LPM tree. |
| * The structure of the tree must be sorted as a sorted binary tree, while |
| * each node is a bin that is tagged as the length of the prefixes the lookup |
| * will refer to. Therefore, bin X refers to a set of entries with prefixes |
| * of X bits to match with the destination address. The bin 0 indicates |
| * the default action, when there is no match of any prefix. |
| */ |
| #define MLXSW_REG_RALST_ID 0x8011 |
| #define MLXSW_REG_RALST_LEN 0x104 |
| |
| MLXSW_REG_DEFINE(ralst, MLXSW_REG_RALST_ID, MLXSW_REG_RALST_LEN); |
| |
| /* reg_ralst_root_bin |
| * The bin number of the root bin. |
| * 0<root_bin=<(length of IP address) |
| * For a default-route tree configure 0xff |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralst, root_bin, 0x00, 16, 8); |
| |
| /* reg_ralst_tree_id |
| * Tree identifier numbered from 1..(cap_shspm_max_trees-1). |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ralst, tree_id, 0x00, 0, 8); |
| |
| #define MLXSW_REG_RALST_BIN_NO_CHILD 0xff |
| #define MLXSW_REG_RALST_BIN_OFFSET 0x04 |
| #define MLXSW_REG_RALST_BIN_COUNT 128 |
| |
| /* reg_ralst_left_child_bin |
| * Holding the children of the bin according to the stored tree's structure. |
| * For trees composed of less than 4 blocks, the bins in excess are reserved. |
| * Note that tree_id 0 is allocated for a default-route tree, bins are 0xff |
| * Access: RW |
| */ |
| MLXSW_ITEM16_INDEXED(reg, ralst, left_child_bin, 0x04, 8, 8, 0x02, 0x00, false); |
| |
| /* reg_ralst_right_child_bin |
| * Holding the children of the bin according to the stored tree's structure. |
| * For trees composed of less than 4 blocks, the bins in excess are reserved. |
| * Note that tree_id 0 is allocated for a default-route tree, bins are 0xff |
| * Access: RW |
| */ |
| MLXSW_ITEM16_INDEXED(reg, ralst, right_child_bin, 0x04, 0, 8, 0x02, 0x00, |
| false); |
| |
| static inline void mlxsw_reg_ralst_pack(char *payload, u8 root_bin, u8 tree_id) |
| { |
| MLXSW_REG_ZERO(ralst, payload); |
| |
| /* Initialize all bins to have no left or right child */ |
| memset(payload + MLXSW_REG_RALST_BIN_OFFSET, |
| MLXSW_REG_RALST_BIN_NO_CHILD, MLXSW_REG_RALST_BIN_COUNT * 2); |
| |
| mlxsw_reg_ralst_root_bin_set(payload, root_bin); |
| mlxsw_reg_ralst_tree_id_set(payload, tree_id); |
| } |
| |
| static inline void mlxsw_reg_ralst_bin_pack(char *payload, u8 bin_number, |
| u8 left_child_bin, |
| u8 right_child_bin) |
| { |
| int bin_index = bin_number - 1; |
| |
| mlxsw_reg_ralst_left_child_bin_set(payload, bin_index, left_child_bin); |
| mlxsw_reg_ralst_right_child_bin_set(payload, bin_index, |
| right_child_bin); |
| } |
| |
| /* RALTB - Router Algorithmic LPM Tree Binding Register |
| * ---------------------------------------------------- |
| * RALTB is used to bind virtual router and protocol to an allocated LPM tree. |
| */ |
| #define MLXSW_REG_RALTB_ID 0x8012 |
| #define MLXSW_REG_RALTB_LEN 0x04 |
| |
| MLXSW_REG_DEFINE(raltb, MLXSW_REG_RALTB_ID, MLXSW_REG_RALTB_LEN); |
| |
| /* reg_raltb_virtual_router |
| * Virtual Router ID |
| * Range is 0..cap_max_virtual_routers-1 |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, raltb, virtual_router, 0x00, 16, 16); |
| |
| /* reg_raltb_protocol |
| * Protocol. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, raltb, protocol, 0x00, 12, 4); |
| |
| /* reg_raltb_tree_id |
| * Tree to be used for the {virtual_router, protocol} |
| * Tree identifier numbered from 1..(cap_shspm_max_trees-1). |
| * By default, all Unicast IPv4 and IPv6 are bound to tree_id 0. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, raltb, tree_id, 0x00, 0, 8); |
| |
| static inline void mlxsw_reg_raltb_pack(char *payload, u16 virtual_router, |
| enum mlxsw_reg_ralxx_protocol protocol, |
| u8 tree_id) |
| { |
| MLXSW_REG_ZERO(raltb, payload); |
| mlxsw_reg_raltb_virtual_router_set(payload, virtual_router); |
| mlxsw_reg_raltb_protocol_set(payload, protocol); |
| mlxsw_reg_raltb_tree_id_set(payload, tree_id); |
| } |
| |
| /* RALUE - Router Algorithmic LPM Unicast Entry Register |
| * ----------------------------------------------------- |
| * RALUE is used to configure and query LPM entries that serve |
| * the Unicast protocols. |
| */ |
| #define MLXSW_REG_RALUE_ID 0x8013 |
| #define MLXSW_REG_RALUE_LEN 0x38 |
| |
| MLXSW_REG_DEFINE(ralue, MLXSW_REG_RALUE_ID, MLXSW_REG_RALUE_LEN); |
| |
| /* reg_ralue_protocol |
| * Protocol. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ralue, protocol, 0x00, 24, 4); |
| |
| enum mlxsw_reg_ralue_op { |
| /* Read operation. If entry doesn't exist, the operation fails. */ |
| MLXSW_REG_RALUE_OP_QUERY_READ = 0, |
| /* Clear on read operation. Used to read entry and |
| * clear Activity bit. |
| */ |
| MLXSW_REG_RALUE_OP_QUERY_CLEAR = 1, |
| /* Write operation. Used to write a new entry to the table. All RW |
| * fields are written for new entry. Activity bit is set |
| * for new entries. |
| */ |
| MLXSW_REG_RALUE_OP_WRITE_WRITE = 0, |
| /* Update operation. Used to update an existing route entry and |
| * only update the RW fields that are detailed in the field |
| * op_u_mask. If entry doesn't exist, the operation fails. |
| */ |
| MLXSW_REG_RALUE_OP_WRITE_UPDATE = 1, |
| /* Clear activity. The Activity bit (the field a) is cleared |
| * for the entry. |
| */ |
| MLXSW_REG_RALUE_OP_WRITE_CLEAR = 2, |
| /* Delete operation. Used to delete an existing entry. If entry |
| * doesn't exist, the operation fails. |
| */ |
| MLXSW_REG_RALUE_OP_WRITE_DELETE = 3, |
| }; |
| |
| /* reg_ralue_op |
| * Operation. |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, ralue, op, 0x00, 20, 3); |
| |
| /* reg_ralue_a |
| * Activity. Set for new entries. Set if a packet lookup has hit on the |
| * specific entry, only if the entry is a route. To clear the a bit, use |
| * "clear activity" op. |
| * Enabled by activity_dis in RGCR |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, ralue, a, 0x00, 16, 1); |
| |
| /* reg_ralue_virtual_router |
| * Virtual Router ID |
| * Range is 0..cap_max_virtual_routers-1 |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ralue, virtual_router, 0x04, 16, 16); |
| |
| #define MLXSW_REG_RALUE_OP_U_MASK_ENTRY_TYPE BIT(0) |
| #define MLXSW_REG_RALUE_OP_U_MASK_BMP_LEN BIT(1) |
| #define MLXSW_REG_RALUE_OP_U_MASK_ACTION BIT(2) |
| |
| /* reg_ralue_op_u_mask |
| * opcode update mask. |
| * On read operation, this field is reserved. |
| * This field is valid for update opcode, otherwise - reserved. |
| * This field is a bitmask of the fields that should be updated. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, ralue, op_u_mask, 0x04, 8, 3); |
| |
| /* reg_ralue_prefix_len |
| * Number of bits in the prefix of the LPM route. |
| * Note that for IPv6 prefixes, if prefix_len>64 the entry consumes |
| * two entries in the physical HW table. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ralue, prefix_len, 0x08, 0, 8); |
| |
| /* reg_ralue_dip* |
| * The prefix of the route or of the marker that the object of the LPM |
| * is compared with. The most significant bits of the dip are the prefix. |
| * The list significant bits must be '0' if the prefix_len is smaller |
| * than 128 for IPv6 or smaller than 32 for IPv4. |
| * IPv4 address uses bits dip[31:0] and bits dip[127:32] are reserved. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, ralue, dip4, 0x18, 0, 32); |
| |
| enum mlxsw_reg_ralue_entry_type { |
| MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_ENTRY = 1, |
| MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY = 2, |
| MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_AND_ROUTE_ENTRY = 3, |
| }; |
| |
| /* reg_ralue_entry_type |
| * Entry type. |
| * Note - for Marker entries, the action_type and action fields are reserved. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, entry_type, 0x1C, 30, 2); |
| |
| /* reg_ralue_bmp_len |
| * The best match prefix length in the case that there is no match for |
| * longer prefixes. |
| * If (entry_type != MARKER_ENTRY), bmp_len must be equal to prefix_len |
| * Note for any update operation with entry_type modification this |
| * field must be set. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, bmp_len, 0x1C, 16, 8); |
| |
| enum mlxsw_reg_ralue_action_type { |
| MLXSW_REG_RALUE_ACTION_TYPE_REMOTE, |
| MLXSW_REG_RALUE_ACTION_TYPE_LOCAL, |
| MLXSW_REG_RALUE_ACTION_TYPE_IP2ME, |
| }; |
| |
| /* reg_ralue_action_type |
| * Action Type |
| * Indicates how the IP address is connected. |
| * It can be connected to a local subnet through local_erif or can be |
| * on a remote subnet connected through a next-hop router, |
| * or transmitted to the CPU. |
| * Reserved when entry_type = MARKER_ENTRY |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, action_type, 0x1C, 0, 2); |
| |
| enum mlxsw_reg_ralue_trap_action { |
| MLXSW_REG_RALUE_TRAP_ACTION_NOP, |
| MLXSW_REG_RALUE_TRAP_ACTION_TRAP, |
| MLXSW_REG_RALUE_TRAP_ACTION_MIRROR_TO_CPU, |
| MLXSW_REG_RALUE_TRAP_ACTION_MIRROR, |
| MLXSW_REG_RALUE_TRAP_ACTION_DISCARD_ERROR, |
| }; |
| |
| /* reg_ralue_trap_action |
| * Trap action. |
| * For IP2ME action, only NOP and MIRROR are possible. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, trap_action, 0x20, 28, 4); |
| |
| /* reg_ralue_trap_id |
| * Trap ID to be reported to CPU. |
| * Trap ID is RTR_INGRESS0 or RTR_INGRESS1. |
| * For trap_action of NOP, MIRROR and DISCARD_ERROR, trap_id is reserved. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, trap_id, 0x20, 0, 9); |
| |
| /* reg_ralue_adjacency_index |
| * Points to the first entry of the group-based ECMP. |
| * Only relevant in case of REMOTE action. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, adjacency_index, 0x24, 0, 24); |
| |
| /* reg_ralue_ecmp_size |
| * Amount of sequential entries starting |
| * from the adjacency_index (the number of ECMPs). |
| * The valid range is 1-64, 512, 1024, 2048 and 4096. |
| * Reserved when trap_action is TRAP or DISCARD_ERROR. |
| * Only relevant in case of REMOTE action. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, ecmp_size, 0x28, 0, 13); |
| |
| /* reg_ralue_local_erif |
| * Egress Router Interface. |
| * Only relevant in case of LOCAL action. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, local_erif, 0x24, 0, 16); |
| |
| /* reg_ralue_v |
| * Valid bit for the tunnel_ptr field. |
| * If valid = 0 then trap to CPU as IP2ME trap ID. |
| * If valid = 1 and the packet format allows NVE or IPinIP tunnel |
| * decapsulation then tunnel decapsulation is done. |
| * If valid = 1 and packet format does not allow NVE or IPinIP tunnel |
| * decapsulation then trap as IP2ME trap ID. |
| * Only relevant in case of IP2ME action. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, v, 0x24, 31, 1); |
| |
| /* reg_ralue_tunnel_ptr |
| * Tunnel Pointer for NVE or IPinIP tunnel decapsulation. |
| * For Spectrum, pointer to KVD Linear. |
| * Only relevant in case of IP2ME action. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, ralue, tunnel_ptr, 0x24, 0, 24); |
| |
| static inline void mlxsw_reg_ralue_pack(char *payload, |
| enum mlxsw_reg_ralxx_protocol protocol, |
| enum mlxsw_reg_ralue_op op, |
| u16 virtual_router, u8 prefix_len) |
| { |
| MLXSW_REG_ZERO(ralue, payload); |
| mlxsw_reg_ralue_protocol_set(payload, protocol); |
| mlxsw_reg_ralue_op_set(payload, op); |
| mlxsw_reg_ralue_virtual_router_set(payload, virtual_router); |
| mlxsw_reg_ralue_prefix_len_set(payload, prefix_len); |
| mlxsw_reg_ralue_entry_type_set(payload, |
| MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY); |
| mlxsw_reg_ralue_bmp_len_set(payload, prefix_len); |
| } |
| |
| static inline void mlxsw_reg_ralue_pack4(char *payload, |
| enum mlxsw_reg_ralxx_protocol protocol, |
| enum mlxsw_reg_ralue_op op, |
| u16 virtual_router, u8 prefix_len, |
| u32 dip) |
| { |
| mlxsw_reg_ralue_pack(payload, protocol, op, virtual_router, prefix_len); |
| mlxsw_reg_ralue_dip4_set(payload, dip); |
| } |
| |
| static inline void |
| mlxsw_reg_ralue_act_remote_pack(char *payload, |
| enum mlxsw_reg_ralue_trap_action trap_action, |
| u16 trap_id, u32 adjacency_index, u16 ecmp_size) |
| { |
| mlxsw_reg_ralue_action_type_set(payload, |
| MLXSW_REG_RALUE_ACTION_TYPE_REMOTE); |
| mlxsw_reg_ralue_trap_action_set(payload, trap_action); |
| mlxsw_reg_ralue_trap_id_set(payload, trap_id); |
| mlxsw_reg_ralue_adjacency_index_set(payload, adjacency_index); |
| mlxsw_reg_ralue_ecmp_size_set(payload, ecmp_size); |
| } |
| |
| static inline void |
| mlxsw_reg_ralue_act_local_pack(char *payload, |
| enum mlxsw_reg_ralue_trap_action trap_action, |
| u16 trap_id, u16 local_erif) |
| { |
| mlxsw_reg_ralue_action_type_set(payload, |
| MLXSW_REG_RALUE_ACTION_TYPE_LOCAL); |
| mlxsw_reg_ralue_trap_action_set(payload, trap_action); |
| mlxsw_reg_ralue_trap_id_set(payload, trap_id); |
| mlxsw_reg_ralue_local_erif_set(payload, local_erif); |
| } |
| |
| static inline void |
| mlxsw_reg_ralue_act_ip2me_pack(char *payload) |
| { |
| mlxsw_reg_ralue_action_type_set(payload, |
| MLXSW_REG_RALUE_ACTION_TYPE_IP2ME); |
| } |
| |
| /* RAUHT - Router Algorithmic LPM Unicast Host Table Register |
| * ---------------------------------------------------------- |
| * The RAUHT register is used to configure and query the Unicast Host table in |
| * devices that implement the Algorithmic LPM. |
| */ |
| #define MLXSW_REG_RAUHT_ID 0x8014 |
| #define MLXSW_REG_RAUHT_LEN 0x74 |
| |
| MLXSW_REG_DEFINE(rauht, MLXSW_REG_RAUHT_ID, MLXSW_REG_RAUHT_LEN); |
| |
| enum mlxsw_reg_rauht_type { |
| MLXSW_REG_RAUHT_TYPE_IPV4, |
| MLXSW_REG_RAUHT_TYPE_IPV6, |
| }; |
| |
| /* reg_rauht_type |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, rauht, type, 0x00, 24, 2); |
| |
| enum mlxsw_reg_rauht_op { |
| MLXSW_REG_RAUHT_OP_QUERY_READ = 0, |
| /* Read operation */ |
| MLXSW_REG_RAUHT_OP_QUERY_CLEAR_ON_READ = 1, |
| /* Clear on read operation. Used to read entry and clear |
| * activity bit. |
| */ |
| MLXSW_REG_RAUHT_OP_WRITE_ADD = 0, |
| /* Add. Used to write a new entry to the table. All R/W fields are |
| * relevant for new entry. Activity bit is set for new entries. |
| */ |
| MLXSW_REG_RAUHT_OP_WRITE_UPDATE = 1, |
| /* Update action. Used to update an existing route entry and |
| * only update the following fields: |
| * trap_action, trap_id, mac, counter_set_type, counter_index |
| */ |
| MLXSW_REG_RAUHT_OP_WRITE_CLEAR_ACTIVITY = 2, |
| /* Clear activity. A bit is cleared for the entry. */ |
| MLXSW_REG_RAUHT_OP_WRITE_DELETE = 3, |
| /* Delete entry */ |
| MLXSW_REG_RAUHT_OP_WRITE_DELETE_ALL = 4, |
| /* Delete all host entries on a RIF. In this command, dip |
| * field is reserved. |
| */ |
| }; |
| |
| /* reg_rauht_op |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, rauht, op, 0x00, 20, 3); |
| |
| /* reg_rauht_a |
| * Activity. Set for new entries. Set if a packet lookup has hit on |
| * the specific entry. |
| * To clear the a bit, use "clear activity" op. |
| * Enabled by activity_dis in RGCR |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, rauht, a, 0x00, 16, 1); |
| |
| /* reg_rauht_rif |
| * Router Interface |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, rauht, rif, 0x00, 0, 16); |
| |
| /* reg_rauht_dip* |
| * Destination address. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, rauht, dip4, 0x1C, 0x0, 32); |
| |
| enum mlxsw_reg_rauht_trap_action { |
| MLXSW_REG_RAUHT_TRAP_ACTION_NOP, |
| MLXSW_REG_RAUHT_TRAP_ACTION_TRAP, |
| MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR_TO_CPU, |
| MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR, |
| MLXSW_REG_RAUHT_TRAP_ACTION_DISCARD_ERRORS, |
| }; |
| |
| /* reg_rauht_trap_action |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, rauht, trap_action, 0x60, 28, 4); |
| |
| enum mlxsw_reg_rauht_trap_id { |
| MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS0, |
| MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS1, |
| }; |
| |
| /* reg_rauht_trap_id |
| * Trap ID to be reported to CPU. |
| * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1. |
| * For trap_action of NOP, MIRROR and DISCARD_ERROR, |
| * trap_id is reserved. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, rauht, trap_id, 0x60, 0, 9); |
| |
| /* reg_rauht_counter_set_type |
| * Counter set type for flow counters |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, rauht, counter_set_type, 0x68, 24, 8); |
| |
| /* reg_rauht_counter_index |
| * Counter index for flow counters |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, rauht, counter_index, 0x68, 0, 24); |
| |
| /* reg_rauht_mac |
| * MAC address. |
| * Access: RW |
| */ |
| MLXSW_ITEM_BUF(reg, rauht, mac, 0x6E, 6); |
| |
| static inline void mlxsw_reg_rauht_pack(char *payload, |
| enum mlxsw_reg_rauht_op op, u16 rif, |
| const char *mac) |
| { |
| MLXSW_REG_ZERO(rauht, payload); |
| mlxsw_reg_rauht_op_set(payload, op); |
| mlxsw_reg_rauht_rif_set(payload, rif); |
| mlxsw_reg_rauht_mac_memcpy_to(payload, mac); |
| } |
| |
| static inline void mlxsw_reg_rauht_pack4(char *payload, |
| enum mlxsw_reg_rauht_op op, u16 rif, |
| const char *mac, u32 dip) |
| { |
| mlxsw_reg_rauht_pack(payload, op, rif, mac); |
| mlxsw_reg_rauht_dip4_set(payload, dip); |
| } |
| |
| /* RALEU - Router Algorithmic LPM ECMP Update Register |
| * --------------------------------------------------- |
| * The register enables updating the ECMP section in the action for multiple |
| * LPM Unicast entries in a single operation. The update is executed to |
| * all entries of a {virtual router, protocol} tuple using the same ECMP group. |
| */ |
| #define MLXSW_REG_RALEU_ID 0x8015 |
| #define MLXSW_REG_RALEU_LEN 0x28 |
| |
| MLXSW_REG_DEFINE(raleu, MLXSW_REG_RALEU_ID, MLXSW_REG_RALEU_LEN); |
| |
| /* reg_raleu_protocol |
| * Protocol. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, raleu, protocol, 0x00, 24, 4); |
| |
| /* reg_raleu_virtual_router |
| * Virtual Router ID |
| * Range is 0..cap_max_virtual_routers-1 |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, raleu, virtual_router, 0x00, 0, 16); |
| |
| /* reg_raleu_adjacency_index |
| * Adjacency Index used for matching on the existing entries. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, raleu, adjacency_index, 0x10, 0, 24); |
| |
| /* reg_raleu_ecmp_size |
| * ECMP Size used for matching on the existing entries. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, raleu, ecmp_size, 0x14, 0, 13); |
| |
| /* reg_raleu_new_adjacency_index |
| * New Adjacency Index. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, raleu, new_adjacency_index, 0x20, 0, 24); |
| |
| /* reg_raleu_new_ecmp_size |
| * New ECMP Size. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, raleu, new_ecmp_size, 0x24, 0, 13); |
| |
| static inline void mlxsw_reg_raleu_pack(char *payload, |
| enum mlxsw_reg_ralxx_protocol protocol, |
| u16 virtual_router, |
| u32 adjacency_index, u16 ecmp_size, |
| u32 new_adjacency_index, |
| u16 new_ecmp_size) |
| { |
| MLXSW_REG_ZERO(raleu, payload); |
| mlxsw_reg_raleu_protocol_set(payload, protocol); |
| mlxsw_reg_raleu_virtual_router_set(payload, virtual_router); |
| mlxsw_reg_raleu_adjacency_index_set(payload, adjacency_index); |
| mlxsw_reg_raleu_ecmp_size_set(payload, ecmp_size); |
| mlxsw_reg_raleu_new_adjacency_index_set(payload, new_adjacency_index); |
| mlxsw_reg_raleu_new_ecmp_size_set(payload, new_ecmp_size); |
| } |
| |
| /* RAUHTD - Router Algorithmic LPM Unicast Host Table Dump Register |
| * ---------------------------------------------------------------- |
| * The RAUHTD register allows dumping entries from the Router Unicast Host |
| * Table. For a given session an entry is dumped no more than one time. The |
| * first RAUHTD access after reset is a new session. A session ends when the |
| * num_rec response is smaller than num_rec request or for IPv4 when the |
| * num_entries is smaller than 4. The clear activity affect the current session |
| * or the last session if a new session has not started. |
| */ |
| #define MLXSW_REG_RAUHTD_ID 0x8018 |
| #define MLXSW_REG_RAUHTD_BASE_LEN 0x20 |
| #define MLXSW_REG_RAUHTD_REC_LEN 0x20 |
| #define MLXSW_REG_RAUHTD_REC_MAX_NUM 32 |
| #define MLXSW_REG_RAUHTD_LEN (MLXSW_REG_RAUHTD_BASE_LEN + \ |
| MLXSW_REG_RAUHTD_REC_MAX_NUM * MLXSW_REG_RAUHTD_REC_LEN) |
| #define MLXSW_REG_RAUHTD_IPV4_ENT_PER_REC 4 |
| |
| MLXSW_REG_DEFINE(rauhtd, MLXSW_REG_RAUHTD_ID, MLXSW_REG_RAUHTD_LEN); |
| |
| #define MLXSW_REG_RAUHTD_FILTER_A BIT(0) |
| #define MLXSW_REG_RAUHTD_FILTER_RIF BIT(3) |
| |
| /* reg_rauhtd_filter_fields |
| * if a bit is '0' then the relevant field is ignored and dump is done |
| * regardless of the field value |
| * Bit0 - filter by activity: entry_a |
| * Bit3 - filter by entry rip: entry_rif |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, rauhtd, filter_fields, 0x00, 0, 8); |
| |
| enum mlxsw_reg_rauhtd_op { |
| MLXSW_REG_RAUHTD_OP_DUMP, |
| MLXSW_REG_RAUHTD_OP_DUMP_AND_CLEAR, |
| }; |
| |
| /* reg_rauhtd_op |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, rauhtd, op, 0x04, 24, 2); |
| |
| /* reg_rauhtd_num_rec |
| * At request: number of records requested |
| * At response: number of records dumped |
| * For IPv4, each record has 4 entries at request and up to 4 entries |
| * at response |
| * Range is 0..MLXSW_REG_RAUHTD_REC_MAX_NUM |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, rauhtd, num_rec, 0x04, 0, 8); |
| |
| /* reg_rauhtd_entry_a |
| * Dump only if activity has value of entry_a |
| * Reserved if filter_fields bit0 is '0' |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, rauhtd, entry_a, 0x08, 16, 1); |
| |
| enum mlxsw_reg_rauhtd_type { |
| MLXSW_REG_RAUHTD_TYPE_IPV4, |
| MLXSW_REG_RAUHTD_TYPE_IPV6, |
| }; |
| |
| /* reg_rauhtd_type |
| * Dump only if record type is: |
| * 0 - IPv4 |
| * 1 - IPv6 |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, rauhtd, type, 0x08, 0, 4); |
| |
| /* reg_rauhtd_entry_rif |
| * Dump only if RIF has value of entry_rif |
| * Reserved if filter_fields bit3 is '0' |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, rauhtd, entry_rif, 0x0C, 0, 16); |
| |
| static inline void mlxsw_reg_rauhtd_pack(char *payload, |
| enum mlxsw_reg_rauhtd_type type) |
| { |
| MLXSW_REG_ZERO(rauhtd, payload); |
| mlxsw_reg_rauhtd_filter_fields_set(payload, MLXSW_REG_RAUHTD_FILTER_A); |
| mlxsw_reg_rauhtd_op_set(payload, MLXSW_REG_RAUHTD_OP_DUMP_AND_CLEAR); |
| mlxsw_reg_rauhtd_num_rec_set(payload, MLXSW_REG_RAUHTD_REC_MAX_NUM); |
| mlxsw_reg_rauhtd_entry_a_set(payload, 1); |
| mlxsw_reg_rauhtd_type_set(payload, type); |
| } |
| |
| /* reg_rauhtd_ipv4_rec_num_entries |
| * Number of valid entries in this record: |
| * 0 - 1 valid entry |
| * 1 - 2 valid entries |
| * 2 - 3 valid entries |
| * 3 - 4 valid entries |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_rec_num_entries, |
| MLXSW_REG_RAUHTD_BASE_LEN, 28, 2, |
| MLXSW_REG_RAUHTD_REC_LEN, 0x00, false); |
| |
| /* reg_rauhtd_rec_type |
| * Record type. |
| * 0 - IPv4 |
| * 1 - IPv6 |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, rauhtd, rec_type, MLXSW_REG_RAUHTD_BASE_LEN, 24, 2, |
| MLXSW_REG_RAUHTD_REC_LEN, 0x00, false); |
| |
| #define MLXSW_REG_RAUHTD_IPV4_ENT_LEN 0x8 |
| |
| /* reg_rauhtd_ipv4_ent_a |
| * Activity. Set for new entries. Set if a packet lookup has hit on the |
| * specific entry. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_a, MLXSW_REG_RAUHTD_BASE_LEN, 16, 1, |
| MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x00, false); |
| |
| /* reg_rauhtd_ipv4_ent_rif |
| * Router interface. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_rif, MLXSW_REG_RAUHTD_BASE_LEN, 0, |
| 16, MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x00, false); |
| |
| /* reg_rauhtd_ipv4_ent_dip |
| * Destination IPv4 address. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_dip, MLXSW_REG_RAUHTD_BASE_LEN, 0, |
| 32, MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x04, false); |
| |
| static inline void mlxsw_reg_rauhtd_ent_ipv4_unpack(char *payload, |
| int ent_index, u16 *p_rif, |
| u32 *p_dip) |
| { |
| *p_rif = mlxsw_reg_rauhtd_ipv4_ent_rif_get(payload, ent_index); |
| *p_dip = mlxsw_reg_rauhtd_ipv4_ent_dip_get(payload, ent_index); |
| } |
| |
| /* MFCR - Management Fan Control Register |
| * -------------------------------------- |
| * This register controls the settings of the Fan Speed PWM mechanism. |
| */ |
| #define MLXSW_REG_MFCR_ID 0x9001 |
| #define MLXSW_REG_MFCR_LEN 0x08 |
| |
| MLXSW_REG_DEFINE(mfcr, MLXSW_REG_MFCR_ID, MLXSW_REG_MFCR_LEN); |
| |
| enum mlxsw_reg_mfcr_pwm_frequency { |
| MLXSW_REG_MFCR_PWM_FEQ_11HZ = 0x00, |
| MLXSW_REG_MFCR_PWM_FEQ_14_7HZ = 0x01, |
| MLXSW_REG_MFCR_PWM_FEQ_22_1HZ = 0x02, |
| MLXSW_REG_MFCR_PWM_FEQ_1_4KHZ = 0x40, |
| MLXSW_REG_MFCR_PWM_FEQ_5KHZ = 0x41, |
| MLXSW_REG_MFCR_PWM_FEQ_20KHZ = 0x42, |
| MLXSW_REG_MFCR_PWM_FEQ_22_5KHZ = 0x43, |
| MLXSW_REG_MFCR_PWM_FEQ_25KHZ = 0x44, |
| }; |
| |
| /* reg_mfcr_pwm_frequency |
| * Controls the frequency of the PWM signal. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mfcr, pwm_frequency, 0x00, 0, 7); |
| |
| #define MLXSW_MFCR_TACHOS_MAX 10 |
| |
| /* reg_mfcr_tacho_active |
| * Indicates which of the tachometer is active (bit per tachometer). |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, mfcr, tacho_active, 0x04, 16, MLXSW_MFCR_TACHOS_MAX); |
| |
| #define MLXSW_MFCR_PWMS_MAX 5 |
| |
| /* reg_mfcr_pwm_active |
| * Indicates which of the PWM control is active (bit per PWM). |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, mfcr, pwm_active, 0x04, 0, MLXSW_MFCR_PWMS_MAX); |
| |
| static inline void |
| mlxsw_reg_mfcr_pack(char *payload, |
| enum mlxsw_reg_mfcr_pwm_frequency pwm_frequency) |
| { |
| MLXSW_REG_ZERO(mfcr, payload); |
| mlxsw_reg_mfcr_pwm_frequency_set(payload, pwm_frequency); |
| } |
| |
| static inline void |
| mlxsw_reg_mfcr_unpack(char *payload, |
| enum mlxsw_reg_mfcr_pwm_frequency *p_pwm_frequency, |
| u16 *p_tacho_active, u8 *p_pwm_active) |
| { |
| *p_pwm_frequency = mlxsw_reg_mfcr_pwm_frequency_get(payload); |
| *p_tacho_active = mlxsw_reg_mfcr_tacho_active_get(payload); |
| *p_pwm_active = mlxsw_reg_mfcr_pwm_active_get(payload); |
| } |
| |
| /* MFSC - Management Fan Speed Control Register |
| * -------------------------------------------- |
| * This register controls the settings of the Fan Speed PWM mechanism. |
| */ |
| #define MLXSW_REG_MFSC_ID 0x9002 |
| #define MLXSW_REG_MFSC_LEN 0x08 |
| |
| MLXSW_REG_DEFINE(mfsc, MLXSW_REG_MFSC_ID, MLXSW_REG_MFSC_LEN); |
| |
| /* reg_mfsc_pwm |
| * Fan pwm to control / monitor. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, mfsc, pwm, 0x00, 24, 3); |
| |
| /* reg_mfsc_pwm_duty_cycle |
| * Controls the duty cycle of the PWM. Value range from 0..255 to |
| * represent duty cycle of 0%...100%. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mfsc, pwm_duty_cycle, 0x04, 0, 8); |
| |
| static inline void mlxsw_reg_mfsc_pack(char *payload, u8 pwm, |
| u8 pwm_duty_cycle) |
| { |
| MLXSW_REG_ZERO(mfsc, payload); |
| mlxsw_reg_mfsc_pwm_set(payload, pwm); |
| mlxsw_reg_mfsc_pwm_duty_cycle_set(payload, pwm_duty_cycle); |
| } |
| |
| /* MFSM - Management Fan Speed Measurement |
| * --------------------------------------- |
| * This register controls the settings of the Tacho measurements and |
| * enables reading the Tachometer measurements. |
| */ |
| #define MLXSW_REG_MFSM_ID 0x9003 |
| #define MLXSW_REG_MFSM_LEN 0x08 |
| |
| MLXSW_REG_DEFINE(mfsm, MLXSW_REG_MFSM_ID, MLXSW_REG_MFSM_LEN); |
| |
| /* reg_mfsm_tacho |
| * Fan tachometer index. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, mfsm, tacho, 0x00, 24, 4); |
| |
| /* reg_mfsm_rpm |
| * Fan speed (round per minute). |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, mfsm, rpm, 0x04, 0, 16); |
| |
| static inline void mlxsw_reg_mfsm_pack(char *payload, u8 tacho) |
| { |
| MLXSW_REG_ZERO(mfsm, payload); |
| mlxsw_reg_mfsm_tacho_set(payload, tacho); |
| } |
| |
| /* MFSL - Management Fan Speed Limit Register |
| * ------------------------------------------ |
| * The Fan Speed Limit register is used to configure the fan speed |
| * event / interrupt notification mechanism. Fan speed threshold are |
| * defined for both under-speed and over-speed. |
| */ |
| #define MLXSW_REG_MFSL_ID 0x9004 |
| #define MLXSW_REG_MFSL_LEN 0x0C |
| |
| MLXSW_REG_DEFINE(mfsl, MLXSW_REG_MFSL_ID, MLXSW_REG_MFSL_LEN); |
| |
| /* reg_mfsl_tacho |
| * Fan tachometer index. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, mfsl, tacho, 0x00, 24, 4); |
| |
| /* reg_mfsl_tach_min |
| * Tachometer minimum value (minimum RPM). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mfsl, tach_min, 0x04, 0, 16); |
| |
| /* reg_mfsl_tach_max |
| * Tachometer maximum value (maximum RPM). |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mfsl, tach_max, 0x08, 0, 16); |
| |
| static inline void mlxsw_reg_mfsl_pack(char *payload, u8 tacho, |
| u16 tach_min, u16 tach_max) |
| { |
| MLXSW_REG_ZERO(mfsl, payload); |
| mlxsw_reg_mfsl_tacho_set(payload, tacho); |
| mlxsw_reg_mfsl_tach_min_set(payload, tach_min); |
| mlxsw_reg_mfsl_tach_max_set(payload, tach_max); |
| } |
| |
| static inline void mlxsw_reg_mfsl_unpack(char *payload, u8 tacho, |
| u16 *p_tach_min, u16 *p_tach_max) |
| { |
| if (p_tach_min) |
| *p_tach_min = mlxsw_reg_mfsl_tach_min_get(payload); |
| |
| if (p_tach_max) |
| *p_tach_max = mlxsw_reg_mfsl_tach_max_get(payload); |
| } |
| |
| /* MTCAP - Management Temperature Capabilities |
| * ------------------------------------------- |
| * This register exposes the capabilities of the device and |
| * system temperature sensing. |
| */ |
| #define MLXSW_REG_MTCAP_ID 0x9009 |
| #define MLXSW_REG_MTCAP_LEN 0x08 |
| |
| MLXSW_REG_DEFINE(mtcap, MLXSW_REG_MTCAP_ID, MLXSW_REG_MTCAP_LEN); |
| |
| /* reg_mtcap_sensor_count |
| * Number of sensors supported by the device. |
| * This includes the QSFP module sensors (if exists in the QSFP module). |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, mtcap, sensor_count, 0x00, 0, 7); |
| |
| /* MTMP - Management Temperature |
| * ----------------------------- |
| * This register controls the settings of the temperature measurements |
| * and enables reading the temperature measurements. Note that temperature |
| * is in 0.125 degrees Celsius. |
| */ |
| #define MLXSW_REG_MTMP_ID 0x900A |
| #define MLXSW_REG_MTMP_LEN 0x20 |
| |
| MLXSW_REG_DEFINE(mtmp, MLXSW_REG_MTMP_ID, MLXSW_REG_MTMP_LEN); |
| |
| /* reg_mtmp_sensor_index |
| * Sensors index to access. |
| * 64-127 of sensor_index are mapped to the SFP+/QSFP modules sequentially |
| * (module 0 is mapped to sensor_index 64). |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, mtmp, sensor_index, 0x00, 0, 7); |
| |
| /* Convert to milli degrees Celsius */ |
| #define MLXSW_REG_MTMP_TEMP_TO_MC(val) (val * 125) |
| |
| /* reg_mtmp_temperature |
| * Temperature reading from the sensor. Reading is in 0.125 Celsius |
| * degrees units. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, mtmp, temperature, 0x04, 0, 16); |
| |
| /* reg_mtmp_mte |
| * Max Temperature Enable - enables measuring the max temperature on a sensor. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mtmp, mte, 0x08, 31, 1); |
| |
| /* reg_mtmp_mtr |
| * Max Temperature Reset - clears the value of the max temperature register. |
| * Access: WO |
| */ |
| MLXSW_ITEM32(reg, mtmp, mtr, 0x08, 30, 1); |
| |
| /* reg_mtmp_max_temperature |
| * The highest measured temperature from the sensor. |
| * When the bit mte is cleared, the field max_temperature is reserved. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, mtmp, max_temperature, 0x08, 0, 16); |
| |
| #define MLXSW_REG_MTMP_SENSOR_NAME_SIZE 8 |
| |
| /* reg_mtmp_sensor_name |
| * Sensor Name |
| * Access: RO |
| */ |
| MLXSW_ITEM_BUF(reg, mtmp, sensor_name, 0x18, MLXSW_REG_MTMP_SENSOR_NAME_SIZE); |
| |
| static inline void mlxsw_reg_mtmp_pack(char *payload, u8 sensor_index, |
| bool max_temp_enable, |
| bool max_temp_reset) |
| { |
| MLXSW_REG_ZERO(mtmp, payload); |
| mlxsw_reg_mtmp_sensor_index_set(payload, sensor_index); |
| mlxsw_reg_mtmp_mte_set(payload, max_temp_enable); |
| mlxsw_reg_mtmp_mtr_set(payload, max_temp_reset); |
| } |
| |
| static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp, |
| unsigned int *p_max_temp, |
| char *sensor_name) |
| { |
| u16 temp; |
| |
| if (p_temp) { |
| temp = mlxsw_reg_mtmp_temperature_get(payload); |
| *p_temp = MLXSW_REG_MTMP_TEMP_TO_MC(temp); |
| } |
| if (p_max_temp) { |
| temp = mlxsw_reg_mtmp_max_temperature_get(payload); |
| *p_max_temp = MLXSW_REG_MTMP_TEMP_TO_MC(temp); |
| } |
| if (sensor_name) |
| mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name); |
| } |
| |
| /* MPAT - Monitoring Port Analyzer Table |
| * ------------------------------------- |
| * MPAT Register is used to query and configure the Switch PortAnalyzer Table. |
| * For an enabled analyzer, all fields except e (enable) cannot be modified. |
| */ |
| #define MLXSW_REG_MPAT_ID 0x901A |
| #define MLXSW_REG_MPAT_LEN 0x78 |
| |
| MLXSW_REG_DEFINE(mpat, MLXSW_REG_MPAT_ID, MLXSW_REG_MPAT_LEN); |
| |
| /* reg_mpat_pa_id |
| * Port Analyzer ID. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, mpat, pa_id, 0x00, 28, 4); |
| |
| /* reg_mpat_system_port |
| * A unique port identifier for the final destination of the packet. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mpat, system_port, 0x00, 0, 16); |
| |
| /* reg_mpat_e |
| * Enable. Indicating the Port Analyzer is enabled. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mpat, e, 0x04, 31, 1); |
| |
| /* reg_mpat_qos |
| * Quality Of Service Mode. |
| * 0: CONFIGURED - QoS parameters (Switch Priority, and encapsulation |
| * PCP, DEI, DSCP or VL) are configured. |
| * 1: MAINTAIN - QoS parameters (Switch Priority, Color) are the |
| * same as in the original packet that has triggered the mirroring. For |
| * SPAN also the pcp,dei are maintained. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mpat, qos, 0x04, 26, 1); |
| |
| /* reg_mpat_be |
| * Best effort mode. Indicates mirroring traffic should not cause packet |
| * drop or back pressure, but will discard the mirrored packets. Mirrored |
| * packets will be forwarded on a best effort manner. |
| * 0: Do not discard mirrored packets |
| * 1: Discard mirrored packets if causing congestion |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mpat, be, 0x04, 25, 1); |
| |
| static inline void mlxsw_reg_mpat_pack(char *payload, u8 pa_id, |
| u16 system_port, bool e) |
| { |
| MLXSW_REG_ZERO(mpat, payload); |
| mlxsw_reg_mpat_pa_id_set(payload, pa_id); |
| mlxsw_reg_mpat_system_port_set(payload, system_port); |
| mlxsw_reg_mpat_e_set(payload, e); |
| mlxsw_reg_mpat_qos_set(payload, 1); |
| mlxsw_reg_mpat_be_set(payload, 1); |
| } |
| |
| /* MPAR - Monitoring Port Analyzer Register |
| * ---------------------------------------- |
| * MPAR register is used to query and configure the port analyzer port mirroring |
| * properties. |
| */ |
| #define MLXSW_REG_MPAR_ID 0x901B |
| #define MLXSW_REG_MPAR_LEN 0x08 |
| |
| MLXSW_REG_DEFINE(mpar, MLXSW_REG_MPAR_ID, MLXSW_REG_MPAR_LEN); |
| |
| /* reg_mpar_local_port |
| * The local port to mirror the packets from. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, mpar, local_port, 0x00, 16, 8); |
| |
| enum mlxsw_reg_mpar_i_e { |
| MLXSW_REG_MPAR_TYPE_EGRESS, |
| MLXSW_REG_MPAR_TYPE_INGRESS, |
| }; |
| |
| /* reg_mpar_i_e |
| * Ingress/Egress |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, mpar, i_e, 0x00, 0, 4); |
| |
| /* reg_mpar_enable |
| * Enable mirroring |
| * By default, port mirroring is disabled for all ports. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mpar, enable, 0x04, 31, 1); |
| |
| /* reg_mpar_pa_id |
| * Port Analyzer ID. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mpar, pa_id, 0x04, 0, 4); |
| |
| static inline void mlxsw_reg_mpar_pack(char *payload, u8 local_port, |
| enum mlxsw_reg_mpar_i_e i_e, |
| bool enable, u8 pa_id) |
| { |
| MLXSW_REG_ZERO(mpar, payload); |
| mlxsw_reg_mpar_local_port_set(payload, local_port); |
| mlxsw_reg_mpar_enable_set(payload, enable); |
| mlxsw_reg_mpar_i_e_set(payload, i_e); |
| mlxsw_reg_mpar_pa_id_set(payload, pa_id); |
| } |
| |
| /* MLCR - Management LED Control Register |
| * -------------------------------------- |
| * Controls the system LEDs. |
| */ |
| #define MLXSW_REG_MLCR_ID 0x902B |
| #define MLXSW_REG_MLCR_LEN 0x0C |
| |
| MLXSW_REG_DEFINE(mlcr, MLXSW_REG_MLCR_ID, MLXSW_REG_MLCR_LEN); |
| |
| /* reg_mlcr_local_port |
| * Local port number. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mlcr, local_port, 0x00, 16, 8); |
| |
| #define MLXSW_REG_MLCR_DURATION_MAX 0xFFFF |
| |
| /* reg_mlcr_beacon_duration |
| * Duration of the beacon to be active, in seconds. |
| * 0x0 - Will turn off the beacon. |
| * 0xFFFF - Will turn on the beacon until explicitly turned off. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mlcr, beacon_duration, 0x04, 0, 16); |
| |
| /* reg_mlcr_beacon_remain |
| * Remaining duration of the beacon, in seconds. |
| * 0xFFFF indicates an infinite amount of time. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, mlcr, beacon_remain, 0x08, 0, 16); |
| |
| static inline void mlxsw_reg_mlcr_pack(char *payload, u8 local_port, |
| bool active) |
| { |
| MLXSW_REG_ZERO(mlcr, payload); |
| mlxsw_reg_mlcr_local_port_set(payload, local_port); |
| mlxsw_reg_mlcr_beacon_duration_set(payload, active ? |
| MLXSW_REG_MLCR_DURATION_MAX : 0); |
| } |
| |
| /* MPSC - Monitoring Packet Sampling Configuration Register |
| * -------------------------------------------------------- |
| * MPSC Register is used to configure the Packet Sampling mechanism. |
| */ |
| #define MLXSW_REG_MPSC_ID 0x9080 |
| #define MLXSW_REG_MPSC_LEN 0x1C |
| |
| MLXSW_REG_DEFINE(mpsc, MLXSW_REG_MPSC_ID, MLXSW_REG_MPSC_LEN); |
| |
| /* reg_mpsc_local_port |
| * Local port number |
| * Not supported for CPU port |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, mpsc, local_port, 0x00, 16, 8); |
| |
| /* reg_mpsc_e |
| * Enable sampling on port local_port |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mpsc, e, 0x04, 30, 1); |
| |
| #define MLXSW_REG_MPSC_RATE_MAX 3500000000UL |
| |
| /* reg_mpsc_rate |
| * Sampling rate = 1 out of rate packets (with randomization around |
| * the point). Valid values are: 1 to MLXSW_REG_MPSC_RATE_MAX |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, mpsc, rate, 0x08, 0, 32); |
| |
| static inline void mlxsw_reg_mpsc_pack(char *payload, u8 local_port, bool e, |
| u32 rate) |
| { |
| MLXSW_REG_ZERO(mpsc, payload); |
| mlxsw_reg_mpsc_local_port_set(payload, local_port); |
| mlxsw_reg_mpsc_e_set(payload, e); |
| mlxsw_reg_mpsc_rate_set(payload, rate); |
| } |
| |
| /* SBPR - Shared Buffer Pools Register |
| * ----------------------------------- |
| * The SBPR configures and retrieves the shared buffer pools and configuration. |
| */ |
| #define MLXSW_REG_SBPR_ID 0xB001 |
| #define MLXSW_REG_SBPR_LEN 0x14 |
| |
| MLXSW_REG_DEFINE(sbpr, MLXSW_REG_SBPR_ID, MLXSW_REG_SBPR_LEN); |
| |
| /* shared direstion enum for SBPR, SBCM, SBPM */ |
| enum mlxsw_reg_sbxx_dir { |
| MLXSW_REG_SBXX_DIR_INGRESS, |
| MLXSW_REG_SBXX_DIR_EGRESS, |
| }; |
| |
| /* reg_sbpr_dir |
| * Direction. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbpr, dir, 0x00, 24, 2); |
| |
| /* reg_sbpr_pool |
| * Pool index. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbpr, pool, 0x00, 0, 4); |
| |
| /* reg_sbpr_size |
| * Pool size in buffer cells. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbpr, size, 0x04, 0, 24); |
| |
| enum mlxsw_reg_sbpr_mode { |
| MLXSW_REG_SBPR_MODE_STATIC, |
| MLXSW_REG_SBPR_MODE_DYNAMIC, |
| }; |
| |
| /* reg_sbpr_mode |
| * Pool quota calculation mode. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbpr, mode, 0x08, 0, 4); |
| |
| static inline void mlxsw_reg_sbpr_pack(char *payload, u8 pool, |
| enum mlxsw_reg_sbxx_dir dir, |
| enum mlxsw_reg_sbpr_mode mode, u32 size) |
| { |
| MLXSW_REG_ZERO(sbpr, payload); |
| mlxsw_reg_sbpr_pool_set(payload, pool); |
| mlxsw_reg_sbpr_dir_set(payload, dir); |
| mlxsw_reg_sbpr_mode_set(payload, mode); |
| mlxsw_reg_sbpr_size_set(payload, size); |
| } |
| |
| /* SBCM - Shared Buffer Class Management Register |
| * ---------------------------------------------- |
| * The SBCM register configures and retrieves the shared buffer allocation |
| * and configuration according to Port-PG, including the binding to pool |
| * and definition of the associated quota. |
| */ |
| #define MLXSW_REG_SBCM_ID 0xB002 |
| #define MLXSW_REG_SBCM_LEN 0x28 |
| |
| MLXSW_REG_DEFINE(sbcm, MLXSW_REG_SBCM_ID, MLXSW_REG_SBCM_LEN); |
| |
| /* reg_sbcm_local_port |
| * Local port number. |
| * For Ingress: excludes CPU port and Router port |
| * For Egress: excludes IP Router |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbcm, local_port, 0x00, 16, 8); |
| |
| /* reg_sbcm_pg_buff |
| * PG buffer - Port PG (dir=ingress) / traffic class (dir=egress) |
| * For PG buffer: range is 0..cap_max_pg_buffers - 1 |
| * For traffic class: range is 0..cap_max_tclass - 1 |
| * Note that when traffic class is in MC aware mode then the traffic |
| * classes which are MC aware cannot be configured. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbcm, pg_buff, 0x00, 8, 6); |
| |
| /* reg_sbcm_dir |
| * Direction. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbcm, dir, 0x00, 0, 2); |
| |
| /* reg_sbcm_min_buff |
| * Minimum buffer size for the limiter, in cells. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbcm, min_buff, 0x18, 0, 24); |
| |
| /* shared max_buff limits for dynamic threshold for SBCM, SBPM */ |
| #define MLXSW_REG_SBXX_DYN_MAX_BUFF_MIN 1 |
| #define MLXSW_REG_SBXX_DYN_MAX_BUFF_MAX 14 |
| |
| /* reg_sbcm_max_buff |
| * When the pool associated to the port-pg/tclass is configured to |
| * static, Maximum buffer size for the limiter configured in cells. |
| * When the pool associated to the port-pg/tclass is configured to |
| * dynamic, the max_buff holds the "alpha" parameter, supporting |
| * the following values: |
| * 0: 0 |
| * i: (1/128)*2^(i-1), for i=1..14 |
| * 0xFF: Infinity |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbcm, max_buff, 0x1C, 0, 24); |
| |
| /* reg_sbcm_pool |
| * Association of the port-priority to a pool. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbcm, pool, 0x24, 0, 4); |
| |
| static inline void mlxsw_reg_sbcm_pack(char *payload, u8 local_port, u8 pg_buff, |
| enum mlxsw_reg_sbxx_dir dir, |
| u32 min_buff, u32 max_buff, u8 pool) |
| { |
| MLXSW_REG_ZERO(sbcm, payload); |
| mlxsw_reg_sbcm_local_port_set(payload, local_port); |
| mlxsw_reg_sbcm_pg_buff_set(payload, pg_buff); |
| mlxsw_reg_sbcm_dir_set(payload, dir); |
| mlxsw_reg_sbcm_min_buff_set(payload, min_buff); |
| mlxsw_reg_sbcm_max_buff_set(payload, max_buff); |
| mlxsw_reg_sbcm_pool_set(payload, pool); |
| } |
| |
| /* SBPM - Shared Buffer Port Management Register |
| * --------------------------------------------- |
| * The SBPM register configures and retrieves the shared buffer allocation |
| * and configuration according to Port-Pool, including the definition |
| * of the associated quota. |
| */ |
| #define MLXSW_REG_SBPM_ID 0xB003 |
| #define MLXSW_REG_SBPM_LEN 0x28 |
| |
| MLXSW_REG_DEFINE(sbpm, MLXSW_REG_SBPM_ID, MLXSW_REG_SBPM_LEN); |
| |
| /* reg_sbpm_local_port |
| * Local port number. |
| * For Ingress: excludes CPU port and Router port |
| * For Egress: excludes IP Router |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbpm, local_port, 0x00, 16, 8); |
| |
| /* reg_sbpm_pool |
| * The pool associated to quota counting on the local_port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbpm, pool, 0x00, 8, 4); |
| |
| /* reg_sbpm_dir |
| * Direction. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbpm, dir, 0x00, 0, 2); |
| |
| /* reg_sbpm_buff_occupancy |
| * Current buffer occupancy in cells. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, sbpm, buff_occupancy, 0x10, 0, 24); |
| |
| /* reg_sbpm_clr |
| * Clear Max Buffer Occupancy |
| * When this bit is set, max_buff_occupancy field is cleared (and a |
| * new max value is tracked from the time the clear was performed). |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, sbpm, clr, 0x14, 31, 1); |
| |
| /* reg_sbpm_max_buff_occupancy |
| * Maximum value of buffer occupancy in cells monitored. Cleared by |
| * writing to the clr field. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, sbpm, max_buff_occupancy, 0x14, 0, 24); |
| |
| /* reg_sbpm_min_buff |
| * Minimum buffer size for the limiter, in cells. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbpm, min_buff, 0x18, 0, 24); |
| |
| /* reg_sbpm_max_buff |
| * When the pool associated to the port-pg/tclass is configured to |
| * static, Maximum buffer size for the limiter configured in cells. |
| * When the pool associated to the port-pg/tclass is configured to |
| * dynamic, the max_buff holds the "alpha" parameter, supporting |
| * the following values: |
| * 0: 0 |
| * i: (1/128)*2^(i-1), for i=1..14 |
| * 0xFF: Infinity |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbpm, max_buff, 0x1C, 0, 24); |
| |
| static inline void mlxsw_reg_sbpm_pack(char *payload, u8 local_port, u8 pool, |
| enum mlxsw_reg_sbxx_dir dir, bool clr, |
| u32 min_buff, u32 max_buff) |
| { |
| MLXSW_REG_ZERO(sbpm, payload); |
| mlxsw_reg_sbpm_local_port_set(payload, local_port); |
| mlxsw_reg_sbpm_pool_set(payload, pool); |
| mlxsw_reg_sbpm_dir_set(payload, dir); |
| mlxsw_reg_sbpm_clr_set(payload, clr); |
| mlxsw_reg_sbpm_min_buff_set(payload, min_buff); |
| mlxsw_reg_sbpm_max_buff_set(payload, max_buff); |
| } |
| |
| static inline void mlxsw_reg_sbpm_unpack(char *payload, u32 *p_buff_occupancy, |
| u32 *p_max_buff_occupancy) |
| { |
| *p_buff_occupancy = mlxsw_reg_sbpm_buff_occupancy_get(payload); |
| *p_max_buff_occupancy = mlxsw_reg_sbpm_max_buff_occupancy_get(payload); |
| } |
| |
| /* SBMM - Shared Buffer Multicast Management Register |
| * -------------------------------------------------- |
| * The SBMM register configures and retrieves the shared buffer allocation |
| * and configuration for MC packets according to Switch-Priority, including |
| * the binding to pool and definition of the associated quota. |
| */ |
| #define MLXSW_REG_SBMM_ID 0xB004 |
| #define MLXSW_REG_SBMM_LEN 0x28 |
| |
| MLXSW_REG_DEFINE(sbmm, MLXSW_REG_SBMM_ID, MLXSW_REG_SBMM_LEN); |
| |
| /* reg_sbmm_prio |
| * Switch Priority. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbmm, prio, 0x00, 8, 4); |
| |
| /* reg_sbmm_min_buff |
| * Minimum buffer size for the limiter, in cells. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbmm, min_buff, 0x18, 0, 24); |
| |
| /* reg_sbmm_max_buff |
| * When the pool associated to the port-pg/tclass is configured to |
| * static, Maximum buffer size for the limiter configured in cells. |
| * When the pool associated to the port-pg/tclass is configured to |
| * dynamic, the max_buff holds the "alpha" parameter, supporting |
| * the following values: |
| * 0: 0 |
| * i: (1/128)*2^(i-1), for i=1..14 |
| * 0xFF: Infinity |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbmm, max_buff, 0x1C, 0, 24); |
| |
| /* reg_sbmm_pool |
| * Association of the port-priority to a pool. |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbmm, pool, 0x24, 0, 4); |
| |
| static inline void mlxsw_reg_sbmm_pack(char *payload, u8 prio, u32 min_buff, |
| u32 max_buff, u8 pool) |
| { |
| MLXSW_REG_ZERO(sbmm, payload); |
| mlxsw_reg_sbmm_prio_set(payload, prio); |
| mlxsw_reg_sbmm_min_buff_set(payload, min_buff); |
| mlxsw_reg_sbmm_max_buff_set(payload, max_buff); |
| mlxsw_reg_sbmm_pool_set(payload, pool); |
| } |
| |
| /* SBSR - Shared Buffer Status Register |
| * ------------------------------------ |
| * The SBSR register retrieves the shared buffer occupancy according to |
| * Port-Pool. Note that this register enables reading a large amount of data. |
| * It is the user's responsibility to limit the amount of data to ensure the |
| * response can match the maximum transfer unit. In case the response exceeds |
| * the maximum transport unit, it will be truncated with no special notice. |
| */ |
| #define MLXSW_REG_SBSR_ID 0xB005 |
| #define MLXSW_REG_SBSR_BASE_LEN 0x5C /* base length, without records */ |
| #define MLXSW_REG_SBSR_REC_LEN 0x8 /* record length */ |
| #define MLXSW_REG_SBSR_REC_MAX_COUNT 120 |
| #define MLXSW_REG_SBSR_LEN (MLXSW_REG_SBSR_BASE_LEN + \ |
| MLXSW_REG_SBSR_REC_LEN * \ |
| MLXSW_REG_SBSR_REC_MAX_COUNT) |
| |
| MLXSW_REG_DEFINE(sbsr, MLXSW_REG_SBSR_ID, MLXSW_REG_SBSR_LEN); |
| |
| /* reg_sbsr_clr |
| * Clear Max Buffer Occupancy. When this bit is set, the max_buff_occupancy |
| * field is cleared (and a new max value is tracked from the time the clear |
| * was performed). |
| * Access: OP |
| */ |
| MLXSW_ITEM32(reg, sbsr, clr, 0x00, 31, 1); |
| |
| /* reg_sbsr_ingress_port_mask |
| * Bit vector for all ingress network ports. |
| * Indicates which of the ports (for which the relevant bit is set) |
| * are affected by the set operation. Configuration of any other port |
| * does not change. |
| * Access: Index |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, sbsr, ingress_port_mask, 0x10, 0x20, 1); |
| |
| /* reg_sbsr_pg_buff_mask |
| * Bit vector for all switch priority groups. |
| * Indicates which of the priorities (for which the relevant bit is set) |
| * are affected by the set operation. Configuration of any other priority |
| * does not change. |
| * Range is 0..cap_max_pg_buffers - 1 |
| * Access: Index |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, sbsr, pg_buff_mask, 0x30, 0x4, 1); |
| |
| /* reg_sbsr_egress_port_mask |
| * Bit vector for all egress network ports. |
| * Indicates which of the ports (for which the relevant bit is set) |
| * are affected by the set operation. Configuration of any other port |
| * does not change. |
| * Access: Index |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, sbsr, egress_port_mask, 0x34, 0x20, 1); |
| |
| /* reg_sbsr_tclass_mask |
| * Bit vector for all traffic classes. |
| * Indicates which of the traffic classes (for which the relevant bit is |
| * set) are affected by the set operation. Configuration of any other |
| * traffic class does not change. |
| * Range is 0..cap_max_tclass - 1 |
| * Access: Index |
| */ |
| MLXSW_ITEM_BIT_ARRAY(reg, sbsr, tclass_mask, 0x54, 0x8, 1); |
| |
| static inline void mlxsw_reg_sbsr_pack(char *payload, bool clr) |
| { |
| MLXSW_REG_ZERO(sbsr, payload); |
| mlxsw_reg_sbsr_clr_set(payload, clr); |
| } |
| |
| /* reg_sbsr_rec_buff_occupancy |
| * Current buffer occupancy in cells. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sbsr, rec_buff_occupancy, MLXSW_REG_SBSR_BASE_LEN, |
| 0, 24, MLXSW_REG_SBSR_REC_LEN, 0x00, false); |
| |
| /* reg_sbsr_rec_max_buff_occupancy |
| * Maximum value of buffer occupancy in cells monitored. Cleared by |
| * writing to the clr field. |
| * Access: RO |
| */ |
| MLXSW_ITEM32_INDEXED(reg, sbsr, rec_max_buff_occupancy, MLXSW_REG_SBSR_BASE_LEN, |
| 0, 24, MLXSW_REG_SBSR_REC_LEN, 0x04, false); |
| |
| static inline void mlxsw_reg_sbsr_rec_unpack(char *payload, int rec_index, |
| u32 *p_buff_occupancy, |
| u32 *p_max_buff_occupancy) |
| { |
| *p_buff_occupancy = |
| mlxsw_reg_sbsr_rec_buff_occupancy_get(payload, rec_index); |
| *p_max_buff_occupancy = |
| mlxsw_reg_sbsr_rec_max_buff_occupancy_get(payload, rec_index); |
| } |
| |
| /* SBIB - Shared Buffer Internal Buffer Register |
| * --------------------------------------------- |
| * The SBIB register configures per port buffers for internal use. The internal |
| * buffers consume memory on the port buffers (note that the port buffers are |
| * used also by PBMC). |
| * |
| * For Spectrum this is used for egress mirroring. |
| */ |
| #define MLXSW_REG_SBIB_ID 0xB006 |
| #define MLXSW_REG_SBIB_LEN 0x10 |
| |
| MLXSW_REG_DEFINE(sbib, MLXSW_REG_SBIB_ID, MLXSW_REG_SBIB_LEN); |
| |
| /* reg_sbib_local_port |
| * Local port number |
| * Not supported for CPU port and router port |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, sbib, local_port, 0x00, 16, 8); |
| |
| /* reg_sbib_buff_size |
| * Units represented in cells |
| * Allowed range is 0 to (cap_max_headroom_size - 1) |
| * Default is 0 |
| * Access: RW |
| */ |
| MLXSW_ITEM32(reg, sbib, buff_size, 0x08, 0, 24); |
| |
| static inline void mlxsw_reg_sbib_pack(char *payload, u8 local_port, |
| u32 buff_size) |
| { |
| MLXSW_REG_ZERO(sbib, payload); |
| mlxsw_reg_sbib_local_port_set(payload, local_port); |
| mlxsw_reg_sbib_buff_size_set(payload, buff_size); |
| } |
| |
| static const struct mlxsw_reg_info *mlxsw_reg_infos[] = { |
| MLXSW_REG(sgcr), |
| MLXSW_REG(spad), |
| MLXSW_REG(smid), |
| MLXSW_REG(sspr), |
| MLXSW_REG(sfdat), |
| MLXSW_REG(sfd), |
| MLXSW_REG(sfn), |
| MLXSW_REG(spms), |
| MLXSW_REG(spvid), |
| MLXSW_REG(spvm), |
| MLXSW_REG(spaft), |
| MLXSW_REG(sfgc), |
| MLXSW_REG(sftr), |
| MLXSW_REG(sfdf), |
| MLXSW_REG(sldr), |
| MLXSW_REG(slcr), |
| MLXSW_REG(slcor), |
| MLXSW_REG(spmlr), |
| MLXSW_REG(svfa), |
| MLXSW_REG(svpe), |
| MLXSW_REG(sfmr), |
| MLXSW_REG(spvmlr), |
| MLXSW_REG(ppbt), |
| MLXSW_REG(pacl), |
| MLXSW_REG(pagt), |
| MLXSW_REG(ptar), |
| MLXSW_REG(ppbs), |
| MLXSW_REG(prcr), |
| MLXSW_REG(pefa), |
| MLXSW_REG(ptce2), |
| MLXSW_REG(qpcr), |
| MLXSW_REG(qtct), |
| MLXSW_REG(qeec), |
| MLXSW_REG(pmlp), |
| MLXSW_REG(pmtu), |
| MLXSW_REG(ptys), |
| MLXSW_REG(ppad), |
| MLXSW_REG(paos), |
| MLXSW_REG(pfcc), |
| MLXSW_REG(ppcnt), |
| MLXSW_REG(plib), |
| MLXSW_REG(pptb), |
| MLXSW_REG(pbmc), |
| MLXSW_REG(pspa), |
| MLXSW_REG(htgt), |
| MLXSW_REG(hpkt), |
| MLXSW_REG(rgcr), |
| MLXSW_REG(ritr), |
| MLXSW_REG(ratr), |
| MLXSW_REG(ralta), |
| MLXSW_REG(ralst), |
| MLXSW_REG(raltb), |
| MLXSW_REG(ralue), |
| MLXSW_REG(rauht), |
| MLXSW_REG(raleu), |
| MLXSW_REG(rauhtd), |
| MLXSW_REG(mfcr), |
| MLXSW_REG(mfsc), |
| MLXSW_REG(mfsm), |
| MLXSW_REG(mfsl), |
| MLXSW_REG(mtcap), |
| MLXSW_REG(mtmp), |
| MLXSW_REG(mpat), |
| MLXSW_REG(mpar), |
| MLXSW_REG(mlcr), |
| MLXSW_REG(mpsc), |
| MLXSW_REG(sbpr), |
| MLXSW_REG(sbcm), |
| MLXSW_REG(sbpm), |
| MLXSW_REG(sbmm), |
| MLXSW_REG(sbsr), |
| MLXSW_REG(sbib), |
| }; |
| |
| static inline const char *mlxsw_reg_id_str(u16 reg_id) |
| { |
| const struct mlxsw_reg_info *reg_info; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mlxsw_reg_infos); i++) { |
| reg_info = mlxsw_reg_infos[i]; |
| if (reg_info->id == reg_id) |
| return reg_info->name; |
| } |
| return "*UNKNOWN*"; |
| } |
| |
| /* PUDE - Port Up / Down Event |
| * --------------------------- |
| * Reports the operational state change of a port. |
| */ |
| #define MLXSW_REG_PUDE_LEN 0x10 |
| |
| /* reg_pude_swid |
| * Switch partition ID with which to associate the port. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pude, swid, 0x00, 24, 8); |
| |
| /* reg_pude_local_port |
| * Local port number. |
| * Access: Index |
| */ |
| MLXSW_ITEM32(reg, pude, local_port, 0x00, 16, 8); |
| |
| /* reg_pude_admin_status |
| * Port administrative state (the desired state). |
| * 1 - Up. |
| * 2 - Down. |
| * 3 - Up once. This means that in case of link failure, the port won't go |
| * into polling mode, but will wait to be re-enabled by software. |
| * 4 - Disabled by system. Can only be set by hardware. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, pude, admin_status, 0x00, 8, 4); |
| |
| /* reg_pude_oper_status |
| * Port operatioanl state. |
| * 1 - Up. |
| * 2 - Down. |
| * 3 - Down by port failure. This means that the device will not let the |
| * port up again until explicitly specified by software. |
| * Access: RO |
| */ |
| MLXSW_ITEM32(reg, pude, oper_status, 0x00, 0, 4); |
| |
| #endif |