| /* |
| * Freescale S/PDIF ALSA SoC Digital Audio Interface (DAI) driver |
| * |
| * Copyright (C) 2013 Freescale Semiconductor, Inc. |
| * |
| * Based on stmp3xxx_spdif_dai.c |
| * Vladimir Barinov <vbarinov@embeddedalley.com> |
| * Copyright 2008 SigmaTel, Inc |
| * Copyright 2008 Embedded Alley Solutions, Inc |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/bitrev.h> |
| #include <linux/clk.h> |
| #include <linux/clk-private.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/of_irq.h> |
| #include <linux/regmap.h> |
| |
| #include <sound/asoundef.h> |
| #include <sound/dmaengine_pcm.h> |
| #include <sound/soc.h> |
| |
| #include "fsl_spdif.h" |
| #include "imx-pcm.h" |
| |
| #define FSL_SPDIF_TXFIFO_WML 0x8 |
| #define FSL_SPDIF_RXFIFO_WML 0x8 |
| |
| #define INTR_FOR_PLAYBACK (INT_TXFIFO_RESYNC) |
| #define INTR_FOR_CAPTURE (INT_SYM_ERR | INT_BIT_ERR | INT_URX_FUL |\ |
| INT_URX_OV | INT_QRX_FUL | INT_QRX_OV |\ |
| INT_UQ_SYNC | INT_UQ_ERR | INT_RXFIFO_RESYNC |\ |
| INT_LOSS_LOCK | INT_DPLL_LOCKED) |
| |
| #define SIE_INTR_FOR(tx) (tx ? INTR_FOR_PLAYBACK : INTR_FOR_CAPTURE) |
| |
| /* Index list for the values that has if (DPLL Locked) condition */ |
| static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb }; |
| #define SRPC_NODPLL_START1 0x5 |
| #define SRPC_NODPLL_START2 0xc |
| |
| #define DEFAULT_RXCLK_SRC 1 |
| |
| /* |
| * SPDIF control structure |
| * Defines channel status, subcode and Q sub |
| */ |
| struct spdif_mixer_control { |
| /* spinlock to access control data */ |
| spinlock_t ctl_lock; |
| |
| /* IEC958 channel tx status bit */ |
| unsigned char ch_status[4]; |
| |
| /* User bits */ |
| unsigned char subcode[2 * SPDIF_UBITS_SIZE]; |
| |
| /* Q subcode part of user bits */ |
| unsigned char qsub[2 * SPDIF_QSUB_SIZE]; |
| |
| /* Buffer offset for U/Q */ |
| u32 upos; |
| u32 qpos; |
| |
| /* Ready buffer index of the two buffers */ |
| u32 ready_buf; |
| }; |
| |
| /** |
| * fsl_spdif_priv: Freescale SPDIF private data |
| * |
| * @fsl_spdif_control: SPDIF control data |
| * @cpu_dai_drv: cpu dai driver |
| * @pdev: platform device pointer |
| * @regmap: regmap handler |
| * @dpll_locked: dpll lock flag |
| * @txrate: the best rates for playback |
| * @txclk_df: STC_TXCLK_DF dividers value for playback |
| * @sysclk_df: STC_SYSCLK_DF dividers value for playback |
| * @txclk_src: STC_TXCLK_SRC values for playback |
| * @rxclk_src: SRPC_CLKSRC_SEL values for capture |
| * @txclk: tx clock sources for playback |
| * @rxclk: rx clock sources for capture |
| * @coreclk: core clock for register access via DMA |
| * @sysclk: system clock for rx clock rate measurement |
| * @dma_params_tx: DMA parameters for transmit channel |
| * @dma_params_rx: DMA parameters for receive channel |
| * @name: driver name |
| */ |
| struct fsl_spdif_priv { |
| struct spdif_mixer_control fsl_spdif_control; |
| struct snd_soc_dai_driver cpu_dai_drv; |
| struct platform_device *pdev; |
| struct regmap *regmap; |
| bool dpll_locked; |
| u32 txrate[SPDIF_TXRATE_MAX]; |
| u8 txclk_df[SPDIF_TXRATE_MAX]; |
| u8 sysclk_df[SPDIF_TXRATE_MAX]; |
| u8 txclk_src[SPDIF_TXRATE_MAX]; |
| u8 rxclk_src; |
| struct clk *txclk[SPDIF_TXRATE_MAX]; |
| struct clk *rxclk; |
| struct clk *coreclk; |
| struct clk *sysclk; |
| struct snd_dmaengine_dai_dma_data dma_params_tx; |
| struct snd_dmaengine_dai_dma_data dma_params_rx; |
| |
| /* The name space will be allocated dynamically */ |
| char name[0]; |
| }; |
| |
| |
| /* DPLL locked and lock loss interrupt handler */ |
| static void spdif_irq_dpll_lock(struct fsl_spdif_priv *spdif_priv) |
| { |
| struct regmap *regmap = spdif_priv->regmap; |
| struct platform_device *pdev = spdif_priv->pdev; |
| u32 locked; |
| |
| regmap_read(regmap, REG_SPDIF_SRPC, &locked); |
| locked &= SRPC_DPLL_LOCKED; |
| |
| dev_dbg(&pdev->dev, "isr: Rx dpll %s \n", |
| locked ? "locked" : "loss lock"); |
| |
| spdif_priv->dpll_locked = locked ? true : false; |
| } |
| |
| /* Receiver found illegal symbol interrupt handler */ |
| static void spdif_irq_sym_error(struct fsl_spdif_priv *spdif_priv) |
| { |
| struct regmap *regmap = spdif_priv->regmap; |
| struct platform_device *pdev = spdif_priv->pdev; |
| |
| dev_dbg(&pdev->dev, "isr: receiver found illegal symbol\n"); |
| |
| /* Clear illegal symbol if DPLL unlocked since no audio stream */ |
| if (!spdif_priv->dpll_locked) |
| regmap_update_bits(regmap, REG_SPDIF_SIE, INT_SYM_ERR, 0); |
| } |
| |
| /* U/Q Channel receive register full */ |
| static void spdif_irq_uqrx_full(struct fsl_spdif_priv *spdif_priv, char name) |
| { |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| struct regmap *regmap = spdif_priv->regmap; |
| struct platform_device *pdev = spdif_priv->pdev; |
| u32 *pos, size, val, reg; |
| |
| switch (name) { |
| case 'U': |
| pos = &ctrl->upos; |
| size = SPDIF_UBITS_SIZE; |
| reg = REG_SPDIF_SRU; |
| break; |
| case 'Q': |
| pos = &ctrl->qpos; |
| size = SPDIF_QSUB_SIZE; |
| reg = REG_SPDIF_SRQ; |
| break; |
| default: |
| dev_err(&pdev->dev, "unsupported channel name\n"); |
| return; |
| } |
| |
| dev_dbg(&pdev->dev, "isr: %c Channel receive register full\n", name); |
| |
| if (*pos >= size * 2) { |
| *pos = 0; |
| } else if (unlikely((*pos % size) + 3 > size)) { |
| dev_err(&pdev->dev, "User bit receivce buffer overflow\n"); |
| return; |
| } |
| |
| regmap_read(regmap, reg, &val); |
| ctrl->subcode[*pos++] = val >> 16; |
| ctrl->subcode[*pos++] = val >> 8; |
| ctrl->subcode[*pos++] = val; |
| } |
| |
| /* U/Q Channel sync found */ |
| static void spdif_irq_uq_sync(struct fsl_spdif_priv *spdif_priv) |
| { |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| struct platform_device *pdev = spdif_priv->pdev; |
| |
| dev_dbg(&pdev->dev, "isr: U/Q Channel sync found\n"); |
| |
| /* U/Q buffer reset */ |
| if (ctrl->qpos == 0) |
| return; |
| |
| /* Set ready to this buffer */ |
| ctrl->ready_buf = (ctrl->qpos - 1) / SPDIF_QSUB_SIZE + 1; |
| } |
| |
| /* U/Q Channel framing error */ |
| static void spdif_irq_uq_err(struct fsl_spdif_priv *spdif_priv) |
| { |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| struct regmap *regmap = spdif_priv->regmap; |
| struct platform_device *pdev = spdif_priv->pdev; |
| u32 val; |
| |
| dev_dbg(&pdev->dev, "isr: U/Q Channel framing error\n"); |
| |
| /* Read U/Q data to clear the irq and do buffer reset */ |
| regmap_read(regmap, REG_SPDIF_SRU, &val); |
| regmap_read(regmap, REG_SPDIF_SRQ, &val); |
| |
| /* Drop this U/Q buffer */ |
| ctrl->ready_buf = 0; |
| ctrl->upos = 0; |
| ctrl->qpos = 0; |
| } |
| |
| /* Get spdif interrupt status and clear the interrupt */ |
| static u32 spdif_intr_status_clear(struct fsl_spdif_priv *spdif_priv) |
| { |
| struct regmap *regmap = spdif_priv->regmap; |
| u32 val, val2; |
| |
| regmap_read(regmap, REG_SPDIF_SIS, &val); |
| regmap_read(regmap, REG_SPDIF_SIE, &val2); |
| |
| regmap_write(regmap, REG_SPDIF_SIC, val & val2); |
| |
| return val; |
| } |
| |
| static irqreturn_t spdif_isr(int irq, void *devid) |
| { |
| struct fsl_spdif_priv *spdif_priv = (struct fsl_spdif_priv *)devid; |
| struct platform_device *pdev = spdif_priv->pdev; |
| u32 sis; |
| |
| sis = spdif_intr_status_clear(spdif_priv); |
| |
| if (sis & INT_DPLL_LOCKED) |
| spdif_irq_dpll_lock(spdif_priv); |
| |
| if (sis & INT_TXFIFO_UNOV) |
| dev_dbg(&pdev->dev, "isr: Tx FIFO under/overrun\n"); |
| |
| if (sis & INT_TXFIFO_RESYNC) |
| dev_dbg(&pdev->dev, "isr: Tx FIFO resync\n"); |
| |
| if (sis & INT_CNEW) |
| dev_dbg(&pdev->dev, "isr: cstatus new\n"); |
| |
| if (sis & INT_VAL_NOGOOD) |
| dev_dbg(&pdev->dev, "isr: validity flag no good\n"); |
| |
| if (sis & INT_SYM_ERR) |
| spdif_irq_sym_error(spdif_priv); |
| |
| if (sis & INT_BIT_ERR) |
| dev_dbg(&pdev->dev, "isr: receiver found parity bit error\n"); |
| |
| if (sis & INT_URX_FUL) |
| spdif_irq_uqrx_full(spdif_priv, 'U'); |
| |
| if (sis & INT_URX_OV) |
| dev_dbg(&pdev->dev, "isr: U Channel receive register overrun\n"); |
| |
| if (sis & INT_QRX_FUL) |
| spdif_irq_uqrx_full(spdif_priv, 'Q'); |
| |
| if (sis & INT_QRX_OV) |
| dev_dbg(&pdev->dev, "isr: Q Channel receive register overrun\n"); |
| |
| if (sis & INT_UQ_SYNC) |
| spdif_irq_uq_sync(spdif_priv); |
| |
| if (sis & INT_UQ_ERR) |
| spdif_irq_uq_err(spdif_priv); |
| |
| if (sis & INT_RXFIFO_UNOV) |
| dev_dbg(&pdev->dev, "isr: Rx FIFO under/overrun\n"); |
| |
| if (sis & INT_RXFIFO_RESYNC) |
| dev_dbg(&pdev->dev, "isr: Rx FIFO resync\n"); |
| |
| if (sis & INT_LOSS_LOCK) |
| spdif_irq_dpll_lock(spdif_priv); |
| |
| /* FIXME: Write Tx FIFO to clear TxEm */ |
| if (sis & INT_TX_EM) |
| dev_dbg(&pdev->dev, "isr: Tx FIFO empty\n"); |
| |
| /* FIXME: Read Rx FIFO to clear RxFIFOFul */ |
| if (sis & INT_RXFIFO_FUL) |
| dev_dbg(&pdev->dev, "isr: Rx FIFO full\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int spdif_softreset(struct fsl_spdif_priv *spdif_priv) |
| { |
| struct regmap *regmap = spdif_priv->regmap; |
| u32 val, cycle = 1000; |
| |
| regmap_write(regmap, REG_SPDIF_SCR, SCR_SOFT_RESET); |
| |
| /* |
| * RESET bit would be cleared after finishing its reset procedure, |
| * which typically lasts 8 cycles. 1000 cycles will keep it safe. |
| */ |
| do { |
| regmap_read(regmap, REG_SPDIF_SCR, &val); |
| } while ((val & SCR_SOFT_RESET) && cycle--); |
| |
| if (cycle) |
| return 0; |
| else |
| return -EBUSY; |
| } |
| |
| static void spdif_set_cstatus(struct spdif_mixer_control *ctrl, |
| u8 mask, u8 cstatus) |
| { |
| ctrl->ch_status[3] &= ~mask; |
| ctrl->ch_status[3] |= cstatus & mask; |
| } |
| |
| static void spdif_write_channel_status(struct fsl_spdif_priv *spdif_priv) |
| { |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| struct regmap *regmap = spdif_priv->regmap; |
| struct platform_device *pdev = spdif_priv->pdev; |
| u32 ch_status; |
| |
| ch_status = (bitrev8(ctrl->ch_status[0]) << 16) | |
| (bitrev8(ctrl->ch_status[1]) << 8) | |
| bitrev8(ctrl->ch_status[2]); |
| regmap_write(regmap, REG_SPDIF_STCSCH, ch_status); |
| |
| dev_dbg(&pdev->dev, "STCSCH: 0x%06x\n", ch_status); |
| |
| ch_status = bitrev8(ctrl->ch_status[3]) << 16; |
| regmap_write(regmap, REG_SPDIF_STCSCL, ch_status); |
| |
| dev_dbg(&pdev->dev, "STCSCL: 0x%06x\n", ch_status); |
| } |
| |
| /* Set SPDIF PhaseConfig register for rx clock */ |
| static int spdif_set_rx_clksrc(struct fsl_spdif_priv *spdif_priv, |
| enum spdif_gainsel gainsel, int dpll_locked) |
| { |
| struct regmap *regmap = spdif_priv->regmap; |
| u8 clksrc = spdif_priv->rxclk_src; |
| |
| if (clksrc >= SRPC_CLKSRC_MAX || gainsel >= GAINSEL_MULTI_MAX) |
| return -EINVAL; |
| |
| regmap_update_bits(regmap, REG_SPDIF_SRPC, |
| SRPC_CLKSRC_SEL_MASK | SRPC_GAINSEL_MASK, |
| SRPC_CLKSRC_SEL_SET(clksrc) | SRPC_GAINSEL_SET(gainsel)); |
| |
| return 0; |
| } |
| |
| static int spdif_set_sample_rate(struct snd_pcm_substream *substream, |
| int sample_rate) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| struct regmap *regmap = spdif_priv->regmap; |
| struct platform_device *pdev = spdif_priv->pdev; |
| unsigned long csfs = 0; |
| u32 stc, mask, rate; |
| u8 clk, txclk_df, sysclk_df; |
| int ret; |
| |
| switch (sample_rate) { |
| case 32000: |
| rate = SPDIF_TXRATE_32000; |
| csfs = IEC958_AES3_CON_FS_32000; |
| break; |
| case 44100: |
| rate = SPDIF_TXRATE_44100; |
| csfs = IEC958_AES3_CON_FS_44100; |
| break; |
| case 48000: |
| rate = SPDIF_TXRATE_48000; |
| csfs = IEC958_AES3_CON_FS_48000; |
| break; |
| case 96000: |
| rate = SPDIF_TXRATE_96000; |
| csfs = IEC958_AES3_CON_FS_96000; |
| break; |
| case 192000: |
| rate = SPDIF_TXRATE_192000; |
| csfs = IEC958_AES3_CON_FS_192000; |
| break; |
| default: |
| dev_err(&pdev->dev, "unsupported sample rate %d\n", sample_rate); |
| return -EINVAL; |
| } |
| |
| clk = spdif_priv->txclk_src[rate]; |
| if (clk >= STC_TXCLK_SRC_MAX) { |
| dev_err(&pdev->dev, "tx clock source is out of range\n"); |
| return -EINVAL; |
| } |
| |
| txclk_df = spdif_priv->txclk_df[rate]; |
| if (txclk_df == 0) { |
| dev_err(&pdev->dev, "the txclk_df can't be zero\n"); |
| return -EINVAL; |
| } |
| |
| sysclk_df = spdif_priv->sysclk_df[rate]; |
| |
| /* Don't mess up the clocks from other modules */ |
| if (clk != STC_TXCLK_SPDIF_ROOT) |
| goto clk_set_bypass; |
| |
| /* |
| * The S/PDIF block needs a clock of 64 * fs * txclk_df. |
| * So request 64 * fs * (txclk_df + 1) to get rounded. |
| */ |
| ret = clk_set_rate(spdif_priv->txclk[rate], 64 * sample_rate * (txclk_df + 1)); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to set tx clock rate\n"); |
| return ret; |
| } |
| |
| clk_set_bypass: |
| dev_dbg(&pdev->dev, "expected clock rate = %d\n", |
| (64 * sample_rate * txclk_df * sysclk_df)); |
| dev_dbg(&pdev->dev, "actual clock rate = %ld\n", |
| clk_get_rate(spdif_priv->txclk[rate])); |
| |
| /* set fs field in consumer channel status */ |
| spdif_set_cstatus(ctrl, IEC958_AES3_CON_FS, csfs); |
| |
| /* select clock source and divisor */ |
| stc = STC_TXCLK_ALL_EN | STC_TXCLK_SRC_SET(clk) | |
| STC_TXCLK_DF(txclk_df) | STC_SYSCLK_DF(sysclk_df); |
| mask = STC_TXCLK_ALL_EN_MASK | STC_TXCLK_SRC_MASK | |
| STC_TXCLK_DF_MASK | STC_SYSCLK_DF_MASK; |
| regmap_update_bits(regmap, REG_SPDIF_STC, mask, stc); |
| |
| dev_dbg(&pdev->dev, "set sample rate to %dHz for %dHz playback\n", |
| spdif_priv->txrate[rate], sample_rate); |
| |
| return 0; |
| } |
| |
| static int fsl_spdif_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); |
| struct platform_device *pdev = spdif_priv->pdev; |
| struct regmap *regmap = spdif_priv->regmap; |
| u32 scr, mask, i; |
| int ret; |
| |
| /* Reset module and interrupts only for first initialization */ |
| if (!cpu_dai->active) { |
| ret = clk_prepare_enable(spdif_priv->coreclk); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to enable core clock\n"); |
| return ret; |
| } |
| |
| ret = spdif_softreset(spdif_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to soft reset\n"); |
| goto err; |
| } |
| |
| /* Disable all the interrupts */ |
| regmap_update_bits(regmap, REG_SPDIF_SIE, 0xffffff, 0); |
| } |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| scr = SCR_TXFIFO_AUTOSYNC | SCR_TXFIFO_CTRL_NORMAL | |
| SCR_TXSEL_NORMAL | SCR_USRC_SEL_CHIP | |
| SCR_TXFIFO_FSEL_IF8; |
| mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK | |
| SCR_TXSEL_MASK | SCR_USRC_SEL_MASK | |
| SCR_TXFIFO_FSEL_MASK; |
| for (i = 0; i < SPDIF_TXRATE_MAX; i++) |
| clk_prepare_enable(spdif_priv->txclk[i]); |
| } else { |
| scr = SCR_RXFIFO_FSEL_IF8 | SCR_RXFIFO_AUTOSYNC; |
| mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK| |
| SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK; |
| clk_prepare_enable(spdif_priv->rxclk); |
| } |
| regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr); |
| |
| /* Power up SPDIF module */ |
| regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_LOW_POWER, 0); |
| |
| return 0; |
| |
| err: |
| clk_disable_unprepare(spdif_priv->coreclk); |
| |
| return ret; |
| } |
| |
| static void fsl_spdif_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); |
| struct regmap *regmap = spdif_priv->regmap; |
| u32 scr, mask, i; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| scr = 0; |
| mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK | |
| SCR_TXSEL_MASK | SCR_USRC_SEL_MASK | |
| SCR_TXFIFO_FSEL_MASK; |
| for (i = 0; i < SPDIF_TXRATE_MAX; i++) |
| clk_disable_unprepare(spdif_priv->txclk[i]); |
| } else { |
| scr = SCR_RXFIFO_OFF | SCR_RXFIFO_CTL_ZERO; |
| mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK| |
| SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK; |
| clk_disable_unprepare(spdif_priv->rxclk); |
| } |
| regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr); |
| |
| /* Power down SPDIF module only if tx&rx are both inactive */ |
| if (!cpu_dai->active) { |
| spdif_intr_status_clear(spdif_priv); |
| regmap_update_bits(regmap, REG_SPDIF_SCR, |
| SCR_LOW_POWER, SCR_LOW_POWER); |
| clk_disable_unprepare(spdif_priv->coreclk); |
| } |
| } |
| |
| static int fsl_spdif_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| struct platform_device *pdev = spdif_priv->pdev; |
| u32 sample_rate = params_rate(params); |
| int ret = 0; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| ret = spdif_set_sample_rate(substream, sample_rate); |
| if (ret) { |
| dev_err(&pdev->dev, "%s: set sample rate failed: %d\n", |
| __func__, sample_rate); |
| return ret; |
| } |
| spdif_set_cstatus(ctrl, IEC958_AES3_CON_CLOCK, |
| IEC958_AES3_CON_CLOCK_1000PPM); |
| spdif_write_channel_status(spdif_priv); |
| } else { |
| /* Setup rx clock source */ |
| ret = spdif_set_rx_clksrc(spdif_priv, SPDIF_DEFAULT_GAINSEL, 1); |
| } |
| |
| return ret; |
| } |
| |
| static int fsl_spdif_trigger(struct snd_pcm_substream *substream, |
| int cmd, struct snd_soc_dai *dai) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); |
| struct regmap *regmap = spdif_priv->regmap; |
| bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; |
| u32 intr = SIE_INTR_FOR(tx); |
| u32 dmaen = SCR_DMA_xX_EN(tx); |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| regmap_update_bits(regmap, REG_SPDIF_SIE, intr, intr); |
| regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, dmaen); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, 0); |
| regmap_update_bits(regmap, REG_SPDIF_SIE, intr, 0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dai_ops fsl_spdif_dai_ops = { |
| .startup = fsl_spdif_startup, |
| .hw_params = fsl_spdif_hw_params, |
| .trigger = fsl_spdif_trigger, |
| .shutdown = fsl_spdif_shutdown, |
| }; |
| |
| |
| /* |
| * FSL SPDIF IEC958 controller(mixer) functions |
| * |
| * Channel status get/put control |
| * User bit value get/put control |
| * Valid bit value get control |
| * DPLL lock status get control |
| * User bit sync mode selection control |
| */ |
| |
| static int fsl_spdif_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; |
| uinfo->count = 1; |
| |
| return 0; |
| } |
| |
| static int fsl_spdif_pb_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *uvalue) |
| { |
| struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| |
| uvalue->value.iec958.status[0] = ctrl->ch_status[0]; |
| uvalue->value.iec958.status[1] = ctrl->ch_status[1]; |
| uvalue->value.iec958.status[2] = ctrl->ch_status[2]; |
| uvalue->value.iec958.status[3] = ctrl->ch_status[3]; |
| |
| return 0; |
| } |
| |
| static int fsl_spdif_pb_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *uvalue) |
| { |
| struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| |
| ctrl->ch_status[0] = uvalue->value.iec958.status[0]; |
| ctrl->ch_status[1] = uvalue->value.iec958.status[1]; |
| ctrl->ch_status[2] = uvalue->value.iec958.status[2]; |
| ctrl->ch_status[3] = uvalue->value.iec958.status[3]; |
| |
| spdif_write_channel_status(spdif_priv); |
| |
| return 0; |
| } |
| |
| /* Get channel status from SPDIF_RX_CCHAN register */ |
| static int fsl_spdif_capture_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct regmap *regmap = spdif_priv->regmap; |
| u32 cstatus, val; |
| |
| regmap_read(regmap, REG_SPDIF_SIS, &val); |
| if (!(val & INT_CNEW)) |
| return -EAGAIN; |
| |
| regmap_read(regmap, REG_SPDIF_SRCSH, &cstatus); |
| ucontrol->value.iec958.status[0] = (cstatus >> 16) & 0xFF; |
| ucontrol->value.iec958.status[1] = (cstatus >> 8) & 0xFF; |
| ucontrol->value.iec958.status[2] = cstatus & 0xFF; |
| |
| regmap_read(regmap, REG_SPDIF_SRCSL, &cstatus); |
| ucontrol->value.iec958.status[3] = (cstatus >> 16) & 0xFF; |
| ucontrol->value.iec958.status[4] = (cstatus >> 8) & 0xFF; |
| ucontrol->value.iec958.status[5] = cstatus & 0xFF; |
| |
| /* Clear intr */ |
| regmap_write(regmap, REG_SPDIF_SIC, INT_CNEW); |
| |
| return 0; |
| } |
| |
| /* |
| * Get User bits (subcode) from chip value which readed out |
| * in UChannel register. |
| */ |
| static int fsl_spdif_subcode_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| unsigned long flags; |
| int ret = -EAGAIN; |
| |
| spin_lock_irqsave(&ctrl->ctl_lock, flags); |
| if (ctrl->ready_buf) { |
| int idx = (ctrl->ready_buf - 1) * SPDIF_UBITS_SIZE; |
| memcpy(&ucontrol->value.iec958.subcode[0], |
| &ctrl->subcode[idx], SPDIF_UBITS_SIZE); |
| ret = 0; |
| } |
| spin_unlock_irqrestore(&ctrl->ctl_lock, flags); |
| |
| return ret; |
| } |
| |
| /* Q-subcode infomation. The byte size is SPDIF_UBITS_SIZE/8 */ |
| static int fsl_spdif_qinfo(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES; |
| uinfo->count = SPDIF_QSUB_SIZE; |
| |
| return 0; |
| } |
| |
| /* Get Q subcode from chip value which readed out in QChannel register */ |
| static int fsl_spdif_qget(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control; |
| unsigned long flags; |
| int ret = -EAGAIN; |
| |
| spin_lock_irqsave(&ctrl->ctl_lock, flags); |
| if (ctrl->ready_buf) { |
| int idx = (ctrl->ready_buf - 1) * SPDIF_QSUB_SIZE; |
| memcpy(&ucontrol->value.bytes.data[0], |
| &ctrl->qsub[idx], SPDIF_QSUB_SIZE); |
| ret = 0; |
| } |
| spin_unlock_irqrestore(&ctrl->ctl_lock, flags); |
| |
| return ret; |
| } |
| |
| /* Valid bit infomation */ |
| static int fsl_spdif_vbit_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| |
| return 0; |
| } |
| |
| /* Get valid good bit from interrupt status register */ |
| static int fsl_spdif_vbit_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct regmap *regmap = spdif_priv->regmap; |
| u32 val; |
| |
| regmap_read(regmap, REG_SPDIF_SIS, &val); |
| ucontrol->value.integer.value[0] = (val & INT_VAL_NOGOOD) != 0; |
| regmap_write(regmap, REG_SPDIF_SIC, INT_VAL_NOGOOD); |
| |
| return 0; |
| } |
| |
| /* DPLL lock infomation */ |
| static int fsl_spdif_rxrate_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 16000; |
| uinfo->value.integer.max = 96000; |
| |
| return 0; |
| } |
| |
| static u32 gainsel_multi[GAINSEL_MULTI_MAX] = { |
| 24, 16, 12, 8, 6, 4, 3, |
| }; |
| |
| /* Get RX data clock rate given the SPDIF bus_clk */ |
| static int spdif_get_rxclk_rate(struct fsl_spdif_priv *spdif_priv, |
| enum spdif_gainsel gainsel) |
| { |
| struct regmap *regmap = spdif_priv->regmap; |
| struct platform_device *pdev = spdif_priv->pdev; |
| u64 tmpval64, busclk_freq = 0; |
| u32 freqmeas, phaseconf; |
| u8 clksrc; |
| |
| regmap_read(regmap, REG_SPDIF_SRFM, &freqmeas); |
| regmap_read(regmap, REG_SPDIF_SRPC, &phaseconf); |
| |
| clksrc = (phaseconf >> SRPC_CLKSRC_SEL_OFFSET) & 0xf; |
| |
| /* Get bus clock from system */ |
| if (srpc_dpll_locked[clksrc] && (phaseconf & SRPC_DPLL_LOCKED)) |
| busclk_freq = clk_get_rate(spdif_priv->sysclk); |
| |
| /* FreqMeas_CLK = (BUS_CLK * FreqMeas) / 2 ^ 10 / GAINSEL / 128 */ |
| tmpval64 = (u64) busclk_freq * freqmeas; |
| do_div(tmpval64, gainsel_multi[gainsel] * 1024); |
| do_div(tmpval64, 128 * 1024); |
| |
| dev_dbg(&pdev->dev, "FreqMeas: %d\n", freqmeas); |
| dev_dbg(&pdev->dev, "BusclkFreq: %lld\n", busclk_freq); |
| dev_dbg(&pdev->dev, "RxRate: %lld\n", tmpval64); |
| |
| return (int)tmpval64; |
| } |
| |
| /* |
| * Get DPLL lock or not info from stable interrupt status register. |
| * User application must use this control to get locked, |
| * then can do next PCM operation |
| */ |
| static int fsl_spdif_rxrate_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); |
| int rate = 0; |
| |
| if (spdif_priv->dpll_locked) |
| rate = spdif_get_rxclk_rate(spdif_priv, SPDIF_DEFAULT_GAINSEL); |
| |
| ucontrol->value.integer.value[0] = rate; |
| |
| return 0; |
| } |
| |
| /* User bit sync mode info */ |
| static int fsl_spdif_usync_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 1; |
| |
| return 0; |
| } |
| |
| /* |
| * User bit sync mode: |
| * 1 CD User channel subcode |
| * 0 Non-CD data |
| */ |
| static int fsl_spdif_usync_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct regmap *regmap = spdif_priv->regmap; |
| u32 val; |
| |
| regmap_read(regmap, REG_SPDIF_SRCD, &val); |
| ucontrol->value.integer.value[0] = (val & SRCD_CD_USER) != 0; |
| |
| return 0; |
| } |
| |
| /* |
| * User bit sync mode: |
| * 1 CD User channel subcode |
| * 0 Non-CD data |
| */ |
| static int fsl_spdif_usync_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol); |
| struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai); |
| struct regmap *regmap = spdif_priv->regmap; |
| u32 val = ucontrol->value.integer.value[0] << SRCD_CD_USER_OFFSET; |
| |
| regmap_update_bits(regmap, REG_SPDIF_SRCD, SRCD_CD_USER, val); |
| |
| return 0; |
| } |
| |
| /* FSL SPDIF IEC958 controller defines */ |
| static struct snd_kcontrol_new fsl_spdif_ctrls[] = { |
| /* Status cchanel controller */ |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), |
| .access = SNDRV_CTL_ELEM_ACCESS_READ | |
| SNDRV_CTL_ELEM_ACCESS_WRITE | |
| SNDRV_CTL_ELEM_ACCESS_VOLATILE, |
| .info = fsl_spdif_info, |
| .get = fsl_spdif_pb_get, |
| .put = fsl_spdif_pb_put, |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_PCM, |
| .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT), |
| .access = SNDRV_CTL_ELEM_ACCESS_READ | |
| SNDRV_CTL_ELEM_ACCESS_VOLATILE, |
| .info = fsl_spdif_info, |
| .get = fsl_spdif_capture_get, |
| }, |
| /* User bits controller */ |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_PCM, |
| .name = "IEC958 Subcode Capture Default", |
| .access = SNDRV_CTL_ELEM_ACCESS_READ | |
| SNDRV_CTL_ELEM_ACCESS_VOLATILE, |
| .info = fsl_spdif_info, |
| .get = fsl_spdif_subcode_get, |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_PCM, |
| .name = "IEC958 Q-subcode Capture Default", |
| .access = SNDRV_CTL_ELEM_ACCESS_READ | |
| SNDRV_CTL_ELEM_ACCESS_VOLATILE, |
| .info = fsl_spdif_qinfo, |
| .get = fsl_spdif_qget, |
| }, |
| /* Valid bit error controller */ |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_PCM, |
| .name = "IEC958 V-Bit Errors", |
| .access = SNDRV_CTL_ELEM_ACCESS_READ | |
| SNDRV_CTL_ELEM_ACCESS_VOLATILE, |
| .info = fsl_spdif_vbit_info, |
| .get = fsl_spdif_vbit_get, |
| }, |
| /* DPLL lock info get controller */ |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_PCM, |
| .name = "RX Sample Rate", |
| .access = SNDRV_CTL_ELEM_ACCESS_READ | |
| SNDRV_CTL_ELEM_ACCESS_VOLATILE, |
| .info = fsl_spdif_rxrate_info, |
| .get = fsl_spdif_rxrate_get, |
| }, |
| /* User bit sync mode set/get controller */ |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_PCM, |
| .name = "IEC958 USyncMode CDText", |
| .access = SNDRV_CTL_ELEM_ACCESS_READ | |
| SNDRV_CTL_ELEM_ACCESS_WRITE | |
| SNDRV_CTL_ELEM_ACCESS_VOLATILE, |
| .info = fsl_spdif_usync_info, |
| .get = fsl_spdif_usync_get, |
| .put = fsl_spdif_usync_put, |
| }, |
| }; |
| |
| static int fsl_spdif_dai_probe(struct snd_soc_dai *dai) |
| { |
| struct fsl_spdif_priv *spdif_private = snd_soc_dai_get_drvdata(dai); |
| |
| snd_soc_dai_init_dma_data(dai, &spdif_private->dma_params_tx, |
| &spdif_private->dma_params_rx); |
| |
| snd_soc_add_dai_controls(dai, fsl_spdif_ctrls, ARRAY_SIZE(fsl_spdif_ctrls)); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dai_driver fsl_spdif_dai = { |
| .probe = &fsl_spdif_dai_probe, |
| .playback = { |
| .stream_name = "CPU-Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = FSL_SPDIF_RATES_PLAYBACK, |
| .formats = FSL_SPDIF_FORMATS_PLAYBACK, |
| }, |
| .capture = { |
| .stream_name = "CPU-Capture", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = FSL_SPDIF_RATES_CAPTURE, |
| .formats = FSL_SPDIF_FORMATS_CAPTURE, |
| }, |
| .ops = &fsl_spdif_dai_ops, |
| }; |
| |
| static const struct snd_soc_component_driver fsl_spdif_component = { |
| .name = "fsl-spdif", |
| }; |
| |
| /* FSL SPDIF REGMAP */ |
| |
| static bool fsl_spdif_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_SPDIF_SCR: |
| case REG_SPDIF_SRCD: |
| case REG_SPDIF_SRPC: |
| case REG_SPDIF_SIE: |
| case REG_SPDIF_SIS: |
| case REG_SPDIF_SRL: |
| case REG_SPDIF_SRR: |
| case REG_SPDIF_SRCSH: |
| case REG_SPDIF_SRCSL: |
| case REG_SPDIF_SRU: |
| case REG_SPDIF_SRQ: |
| case REG_SPDIF_STCSCH: |
| case REG_SPDIF_STCSCL: |
| case REG_SPDIF_SRFM: |
| case REG_SPDIF_STC: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_SPDIF_SCR: |
| case REG_SPDIF_SRCD: |
| case REG_SPDIF_SRPC: |
| case REG_SPDIF_SIE: |
| case REG_SPDIF_SIC: |
| case REG_SPDIF_STL: |
| case REG_SPDIF_STR: |
| case REG_SPDIF_STCSCH: |
| case REG_SPDIF_STCSCL: |
| case REG_SPDIF_STC: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static struct regmap_config fsl_spdif_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| |
| .max_register = REG_SPDIF_STC, |
| .readable_reg = fsl_spdif_readable_reg, |
| .writeable_reg = fsl_spdif_writeable_reg, |
| }; |
| |
| static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv, |
| struct clk *clk, u64 savesub, |
| enum spdif_txrate index, bool round) |
| { |
| const u32 rate[] = { 32000, 44100, 48000, 96000, 192000 }; |
| bool is_sysclk = clk == spdif_priv->sysclk; |
| u64 rate_ideal, rate_actual, sub; |
| u32 sysclk_dfmin, sysclk_dfmax; |
| u32 txclk_df, sysclk_df, arate; |
| |
| /* The sysclk has an extra divisor [2, 512] */ |
| sysclk_dfmin = is_sysclk ? 2 : 1; |
| sysclk_dfmax = is_sysclk ? 512 : 1; |
| |
| for (sysclk_df = sysclk_dfmin; sysclk_df <= sysclk_dfmax; sysclk_df++) { |
| for (txclk_df = 1; txclk_df <= 128; txclk_df++) { |
| rate_ideal = rate[index] * (txclk_df + 1) * 64; |
| if (round) |
| rate_actual = clk_round_rate(clk, rate_ideal); |
| else |
| rate_actual = clk_get_rate(clk); |
| |
| arate = rate_actual / 64; |
| arate /= txclk_df * sysclk_df; |
| |
| if (arate == rate[index]) { |
| /* We are lucky */ |
| savesub = 0; |
| spdif_priv->txclk_df[index] = txclk_df; |
| spdif_priv->sysclk_df[index] = sysclk_df; |
| spdif_priv->txrate[index] = arate; |
| goto out; |
| } else if (arate / rate[index] == 1) { |
| /* A little bigger than expect */ |
| sub = (u64)(arate - rate[index]) * 100000; |
| do_div(sub, rate[index]); |
| if (sub >= savesub) |
| continue; |
| savesub = sub; |
| spdif_priv->txclk_df[index] = txclk_df; |
| spdif_priv->sysclk_df[index] = sysclk_df; |
| spdif_priv->txrate[index] = arate; |
| } else if (rate[index] / arate == 1) { |
| /* A little smaller than expect */ |
| sub = (u64)(rate[index] - arate) * 100000; |
| do_div(sub, rate[index]); |
| if (sub >= savesub) |
| continue; |
| savesub = sub; |
| spdif_priv->txclk_df[index] = txclk_df; |
| spdif_priv->sysclk_df[index] = sysclk_df; |
| spdif_priv->txrate[index] = arate; |
| } |
| } |
| } |
| |
| out: |
| return savesub; |
| } |
| |
| static int fsl_spdif_probe_txclk(struct fsl_spdif_priv *spdif_priv, |
| enum spdif_txrate index) |
| { |
| const u32 rate[] = { 32000, 44100, 48000, 96000, 192000 }; |
| struct platform_device *pdev = spdif_priv->pdev; |
| struct device *dev = &pdev->dev; |
| u64 savesub = 100000, ret; |
| struct clk *clk; |
| char tmp[16]; |
| int i; |
| |
| for (i = 0; i < STC_TXCLK_SRC_MAX; i++) { |
| sprintf(tmp, "rxtx%d", i); |
| clk = devm_clk_get(&pdev->dev, tmp); |
| if (IS_ERR(clk)) { |
| dev_err(dev, "no rxtx%d clock in devicetree\n", i); |
| return PTR_ERR(clk); |
| } |
| if (!clk_get_rate(clk)) |
| continue; |
| |
| ret = fsl_spdif_txclk_caldiv(spdif_priv, clk, savesub, index, |
| i == STC_TXCLK_SPDIF_ROOT); |
| if (savesub == ret) |
| continue; |
| |
| savesub = ret; |
| spdif_priv->txclk[index] = clk; |
| spdif_priv->txclk_src[index] = i; |
| |
| /* To quick catch a divisor, we allow a 0.1% deviation */ |
| if (savesub < 100) |
| break; |
| } |
| |
| dev_dbg(&pdev->dev, "use rxtx%d as tx clock source for %dHz sample rate\n", |
| spdif_priv->txclk_src[index], rate[index]); |
| dev_dbg(&pdev->dev, "use txclk df %d for %dHz sample rate\n", |
| spdif_priv->txclk_df[index], rate[index]); |
| if (spdif_priv->txclk[index] == spdif_priv->sysclk) |
| dev_dbg(&pdev->dev, "use sysclk df %d for %dHz sample rate\n", |
| spdif_priv->sysclk_df[index], rate[index]); |
| dev_dbg(&pdev->dev, "the best rate for %dHz sample rate is %dHz\n", |
| rate[index], spdif_priv->txrate[index]); |
| |
| return 0; |
| } |
| |
| static int fsl_spdif_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct fsl_spdif_priv *spdif_priv; |
| struct spdif_mixer_control *ctrl; |
| struct resource *res; |
| void __iomem *regs; |
| int irq, ret, i; |
| |
| if (!np) |
| return -ENODEV; |
| |
| spdif_priv = devm_kzalloc(&pdev->dev, |
| sizeof(struct fsl_spdif_priv) + strlen(np->name) + 1, |
| GFP_KERNEL); |
| if (!spdif_priv) |
| return -ENOMEM; |
| |
| strcpy(spdif_priv->name, np->name); |
| |
| spdif_priv->pdev = pdev; |
| |
| /* Initialize this copy of the CPU DAI driver structure */ |
| memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai, sizeof(fsl_spdif_dai)); |
| spdif_priv->cpu_dai_drv.name = spdif_priv->name; |
| |
| if (of_property_read_bool(np, "big-endian")) |
| fsl_spdif_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG; |
| |
| /* Get the addresses and IRQ */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| spdif_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev, |
| "core", regs, &fsl_spdif_regmap_config); |
| if (IS_ERR(spdif_priv->regmap)) { |
| dev_err(&pdev->dev, "regmap init failed\n"); |
| return PTR_ERR(spdif_priv->regmap); |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "no irq for node %s\n", np->full_name); |
| return irq; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, irq, spdif_isr, 0, |
| spdif_priv->name, spdif_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "could not claim irq %u\n", irq); |
| return ret; |
| } |
| |
| /* Get system clock for rx clock rate calculation */ |
| spdif_priv->sysclk = devm_clk_get(&pdev->dev, "rxtx5"); |
| if (IS_ERR(spdif_priv->sysclk)) { |
| dev_err(&pdev->dev, "no sys clock (rxtx5) in devicetree\n"); |
| return PTR_ERR(spdif_priv->sysclk); |
| } |
| |
| /* Get core clock for data register access via DMA */ |
| spdif_priv->coreclk = devm_clk_get(&pdev->dev, "core"); |
| if (IS_ERR(spdif_priv->coreclk)) { |
| dev_err(&pdev->dev, "no core clock in devicetree\n"); |
| return PTR_ERR(spdif_priv->coreclk); |
| } |
| |
| /* Select clock source for rx/tx clock */ |
| spdif_priv->rxclk = devm_clk_get(&pdev->dev, "rxtx1"); |
| if (IS_ERR(spdif_priv->rxclk)) { |
| dev_err(&pdev->dev, "no rxtx1 clock in devicetree\n"); |
| return PTR_ERR(spdif_priv->rxclk); |
| } |
| spdif_priv->rxclk_src = DEFAULT_RXCLK_SRC; |
| |
| for (i = 0; i < SPDIF_TXRATE_MAX; i++) { |
| ret = fsl_spdif_probe_txclk(spdif_priv, i); |
| if (ret) |
| return ret; |
| } |
| |
| /* Initial spinlock for control data */ |
| ctrl = &spdif_priv->fsl_spdif_control; |
| spin_lock_init(&ctrl->ctl_lock); |
| |
| /* Init tx channel status default value */ |
| ctrl->ch_status[0] = IEC958_AES0_CON_NOT_COPYRIGHT | |
| IEC958_AES0_CON_EMPHASIS_5015; |
| ctrl->ch_status[1] = IEC958_AES1_CON_DIGDIGCONV_ID; |
| ctrl->ch_status[2] = 0x00; |
| ctrl->ch_status[3] = IEC958_AES3_CON_FS_44100 | |
| IEC958_AES3_CON_CLOCK_1000PPM; |
| |
| spdif_priv->dpll_locked = false; |
| |
| spdif_priv->dma_params_tx.maxburst = FSL_SPDIF_TXFIFO_WML; |
| spdif_priv->dma_params_rx.maxburst = FSL_SPDIF_RXFIFO_WML; |
| spdif_priv->dma_params_tx.addr = res->start + REG_SPDIF_STL; |
| spdif_priv->dma_params_rx.addr = res->start + REG_SPDIF_SRL; |
| |
| /* Register with ASoC */ |
| dev_set_drvdata(&pdev->dev, spdif_priv); |
| |
| ret = devm_snd_soc_register_component(&pdev->dev, &fsl_spdif_component, |
| &spdif_priv->cpu_dai_drv, 1); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); |
| return ret; |
| } |
| |
| ret = imx_pcm_dma_init(pdev); |
| if (ret) |
| dev_err(&pdev->dev, "imx_pcm_dma_init failed: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id fsl_spdif_dt_ids[] = { |
| { .compatible = "fsl,imx35-spdif", }, |
| { .compatible = "fsl,vf610-spdif", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_spdif_dt_ids); |
| |
| static struct platform_driver fsl_spdif_driver = { |
| .driver = { |
| .name = "fsl-spdif-dai", |
| .owner = THIS_MODULE, |
| .of_match_table = fsl_spdif_dt_ids, |
| }, |
| .probe = fsl_spdif_probe, |
| }; |
| |
| module_platform_driver(fsl_spdif_driver); |
| |
| MODULE_AUTHOR("Freescale Semiconductor, Inc."); |
| MODULE_DESCRIPTION("Freescale S/PDIF CPU DAI Driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:fsl-spdif-dai"); |