| /* |
| * ATAPI support. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/ide.h> |
| |
| static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| int retries = 100; |
| |
| while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { |
| printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " |
| "a packet command, retrying\n", drive->name); |
| udelay(100); |
| ireason = hwif->INB(hwif->io_ports.nsect_addr); |
| if (retries == 0) { |
| printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " |
| "a packet command, ignoring\n", |
| drive->name); |
| ireason |= CD; |
| ireason &= ~IO; |
| } |
| } |
| |
| return ireason; |
| } |
| |
| ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, |
| ide_handler_t *handler, unsigned int timeout, |
| ide_expiry_t *expiry) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| ide_startstop_t startstop; |
| u8 ireason; |
| |
| if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { |
| printk(KERN_ERR "%s: Strange, packet command initiated yet " |
| "DRQ isn't asserted\n", drive->name); |
| return startstop; |
| } |
| |
| ireason = hwif->INB(hwif->io_ports.nsect_addr); |
| if (drive->media == ide_tape && !drive->scsi) |
| ireason = ide_wait_ireason(drive, ireason); |
| |
| if ((ireason & CD) == 0 || (ireason & IO)) { |
| printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " |
| "a packet command\n", drive->name); |
| return ide_do_reset(drive); |
| } |
| |
| /* Set the interrupt routine */ |
| ide_set_handler(drive, handler, timeout, expiry); |
| |
| /* Begin DMA, if necessary */ |
| if (pc->flags & PC_FLAG_DMA_OK) { |
| pc->flags |= PC_FLAG_DMA_IN_PROGRESS; |
| hwif->dma_ops->dma_start(drive); |
| } |
| |
| /* Send the actual packet */ |
| if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0) |
| hwif->output_data(drive, NULL, pc->c, 12); |
| |
| return ide_started; |
| } |
| EXPORT_SYMBOL_GPL(ide_transfer_pc); |
| |
| ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, |
| ide_handler_t *handler, unsigned int timeout, |
| ide_expiry_t *expiry) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| u16 bcount; |
| u8 dma = 0; |
| |
| /* We haven't transferred any data yet */ |
| pc->xferred = 0; |
| pc->cur_pos = pc->buf; |
| |
| /* Request to transfer the entire buffer at once */ |
| if (drive->media == ide_tape && !drive->scsi) |
| bcount = pc->req_xfer; |
| else |
| bcount = min(pc->req_xfer, 63 * 1024); |
| |
| if (pc->flags & PC_FLAG_DMA_ERROR) { |
| pc->flags &= ~PC_FLAG_DMA_ERROR; |
| ide_dma_off(drive); |
| } |
| |
| if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) { |
| if (drive->scsi) |
| hwif->sg_mapped = 1; |
| dma = !hwif->dma_ops->dma_setup(drive); |
| if (drive->scsi) |
| hwif->sg_mapped = 0; |
| } |
| |
| if (!dma) |
| pc->flags &= ~PC_FLAG_DMA_OK; |
| |
| ide_pktcmd_tf_load(drive, drive->scsi ? 0 : IDE_TFLAG_OUT_DEVICE, |
| bcount, dma); |
| |
| /* Issue the packet command */ |
| if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { |
| ide_execute_command(drive, WIN_PACKETCMD, handler, |
| timeout, NULL); |
| return ide_started; |
| } else { |
| ide_execute_pkt_cmd(drive); |
| return (*handler)(drive); |
| } |
| } |
| EXPORT_SYMBOL_GPL(ide_issue_pc); |