| /* |
| * mac80211 configuration hooks for cfg80211 |
| * |
| * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net> |
| * |
| * This file is GPLv2 as found in COPYING. |
| */ |
| |
| #include <linux/ieee80211.h> |
| #include <linux/nl80211.h> |
| #include <linux/rtnetlink.h> |
| #include <net/net_namespace.h> |
| #include <linux/rcupdate.h> |
| #include <net/cfg80211.h> |
| #include "ieee80211_i.h" |
| #include "cfg.h" |
| #include "rate.h" |
| #include "mesh.h" |
| |
| static bool nl80211_type_check(enum nl80211_iftype type) |
| { |
| switch (type) { |
| case NL80211_IFTYPE_ADHOC: |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_MONITOR: |
| #ifdef CONFIG_MAC80211_MESH |
| case NL80211_IFTYPE_MESH_POINT: |
| #endif |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_AP_VLAN: |
| case NL80211_IFTYPE_WDS: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static int ieee80211_add_iface(struct wiphy *wiphy, char *name, |
| enum nl80211_iftype type, u32 *flags, |
| struct vif_params *params) |
| { |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| struct net_device *dev; |
| struct ieee80211_sub_if_data *sdata; |
| int err; |
| |
| if (!nl80211_type_check(type)) |
| return -EINVAL; |
| |
| err = ieee80211_if_add(local, name, &dev, type, params); |
| if (err || type != NL80211_IFTYPE_MONITOR || !flags) |
| return err; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| sdata->u.mntr_flags = *flags; |
| return 0; |
| } |
| |
| static int ieee80211_del_iface(struct wiphy *wiphy, int ifindex) |
| { |
| struct net_device *dev; |
| struct ieee80211_sub_if_data *sdata; |
| |
| /* we're under RTNL */ |
| dev = __dev_get_by_index(&init_net, ifindex); |
| if (!dev) |
| return -ENODEV; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| ieee80211_if_remove(sdata); |
| |
| return 0; |
| } |
| |
| static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex, |
| enum nl80211_iftype type, u32 *flags, |
| struct vif_params *params) |
| { |
| struct net_device *dev; |
| struct ieee80211_sub_if_data *sdata; |
| int ret; |
| |
| /* we're under RTNL */ |
| dev = __dev_get_by_index(&init_net, ifindex); |
| if (!dev) |
| return -ENODEV; |
| |
| if (!nl80211_type_check(type)) |
| return -EINVAL; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| ret = ieee80211_if_change_type(sdata, type); |
| if (ret) |
| return ret; |
| |
| if (netif_running(sdata->dev)) |
| return -EBUSY; |
| |
| if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len) |
| ieee80211_sdata_set_mesh_id(sdata, |
| params->mesh_id_len, |
| params->mesh_id); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_MONITOR || !flags) |
| return 0; |
| |
| sdata->u.mntr_flags = *flags; |
| return 0; |
| } |
| |
| static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, |
| u8 key_idx, u8 *mac_addr, |
| struct key_params *params) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct sta_info *sta = NULL; |
| enum ieee80211_key_alg alg; |
| struct ieee80211_key *key; |
| int err; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| switch (params->cipher) { |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| alg = ALG_WEP; |
| break; |
| case WLAN_CIPHER_SUITE_TKIP: |
| alg = ALG_TKIP; |
| break; |
| case WLAN_CIPHER_SUITE_CCMP: |
| alg = ALG_CCMP; |
| break; |
| case WLAN_CIPHER_SUITE_AES_CMAC: |
| alg = ALG_AES_CMAC; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key); |
| if (!key) |
| return -ENOMEM; |
| |
| rcu_read_lock(); |
| |
| if (mac_addr) { |
| sta = sta_info_get(sdata->local, mac_addr); |
| if (!sta) { |
| ieee80211_key_free(key); |
| err = -ENOENT; |
| goto out_unlock; |
| } |
| } |
| |
| ieee80211_key_link(key, sdata, sta); |
| |
| err = 0; |
| out_unlock: |
| rcu_read_unlock(); |
| |
| return err; |
| } |
| |
| static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev, |
| u8 key_idx, u8 *mac_addr) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct sta_info *sta; |
| int ret; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| rcu_read_lock(); |
| |
| if (mac_addr) { |
| ret = -ENOENT; |
| |
| sta = sta_info_get(sdata->local, mac_addr); |
| if (!sta) |
| goto out_unlock; |
| |
| if (sta->key) { |
| ieee80211_key_free(sta->key); |
| WARN_ON(sta->key); |
| ret = 0; |
| } |
| |
| goto out_unlock; |
| } |
| |
| if (!sdata->keys[key_idx]) { |
| ret = -ENOENT; |
| goto out_unlock; |
| } |
| |
| ieee80211_key_free(sdata->keys[key_idx]); |
| WARN_ON(sdata->keys[key_idx]); |
| |
| ret = 0; |
| out_unlock: |
| rcu_read_unlock(); |
| |
| return ret; |
| } |
| |
| static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, |
| u8 key_idx, u8 *mac_addr, void *cookie, |
| void (*callback)(void *cookie, |
| struct key_params *params)) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct sta_info *sta = NULL; |
| u8 seq[6] = {0}; |
| struct key_params params; |
| struct ieee80211_key *key; |
| u32 iv32; |
| u16 iv16; |
| int err = -ENOENT; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| rcu_read_lock(); |
| |
| if (mac_addr) { |
| sta = sta_info_get(sdata->local, mac_addr); |
| if (!sta) |
| goto out; |
| |
| key = sta->key; |
| } else |
| key = sdata->keys[key_idx]; |
| |
| if (!key) |
| goto out; |
| |
| memset(¶ms, 0, sizeof(params)); |
| |
| switch (key->conf.alg) { |
| case ALG_TKIP: |
| params.cipher = WLAN_CIPHER_SUITE_TKIP; |
| |
| iv32 = key->u.tkip.tx.iv32; |
| iv16 = key->u.tkip.tx.iv16; |
| |
| if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE && |
| sdata->local->ops->get_tkip_seq) |
| sdata->local->ops->get_tkip_seq( |
| local_to_hw(sdata->local), |
| key->conf.hw_key_idx, |
| &iv32, &iv16); |
| |
| seq[0] = iv16 & 0xff; |
| seq[1] = (iv16 >> 8) & 0xff; |
| seq[2] = iv32 & 0xff; |
| seq[3] = (iv32 >> 8) & 0xff; |
| seq[4] = (iv32 >> 16) & 0xff; |
| seq[5] = (iv32 >> 24) & 0xff; |
| params.seq = seq; |
| params.seq_len = 6; |
| break; |
| case ALG_CCMP: |
| params.cipher = WLAN_CIPHER_SUITE_CCMP; |
| seq[0] = key->u.ccmp.tx_pn[5]; |
| seq[1] = key->u.ccmp.tx_pn[4]; |
| seq[2] = key->u.ccmp.tx_pn[3]; |
| seq[3] = key->u.ccmp.tx_pn[2]; |
| seq[4] = key->u.ccmp.tx_pn[1]; |
| seq[5] = key->u.ccmp.tx_pn[0]; |
| params.seq = seq; |
| params.seq_len = 6; |
| break; |
| case ALG_WEP: |
| if (key->conf.keylen == 5) |
| params.cipher = WLAN_CIPHER_SUITE_WEP40; |
| else |
| params.cipher = WLAN_CIPHER_SUITE_WEP104; |
| break; |
| case ALG_AES_CMAC: |
| params.cipher = WLAN_CIPHER_SUITE_AES_CMAC; |
| seq[0] = key->u.aes_cmac.tx_pn[5]; |
| seq[1] = key->u.aes_cmac.tx_pn[4]; |
| seq[2] = key->u.aes_cmac.tx_pn[3]; |
| seq[3] = key->u.aes_cmac.tx_pn[2]; |
| seq[4] = key->u.aes_cmac.tx_pn[1]; |
| seq[5] = key->u.aes_cmac.tx_pn[0]; |
| params.seq = seq; |
| params.seq_len = 6; |
| break; |
| } |
| |
| params.key = key->conf.key; |
| params.key_len = key->conf.keylen; |
| |
| callback(cookie, ¶ms); |
| err = 0; |
| |
| out: |
| rcu_read_unlock(); |
| return err; |
| } |
| |
| static int ieee80211_config_default_key(struct wiphy *wiphy, |
| struct net_device *dev, |
| u8 key_idx) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| rcu_read_lock(); |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| ieee80211_set_default_key(sdata, key_idx); |
| |
| rcu_read_unlock(); |
| |
| return 0; |
| } |
| |
| static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy, |
| struct net_device *dev, |
| u8 key_idx) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| rcu_read_lock(); |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| ieee80211_set_default_mgmt_key(sdata, key_idx); |
| |
| rcu_read_unlock(); |
| |
| return 0; |
| } |
| |
| static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) |
| { |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| |
| sinfo->filled = STATION_INFO_INACTIVE_TIME | |
| STATION_INFO_RX_BYTES | |
| STATION_INFO_TX_BYTES | |
| STATION_INFO_RX_PACKETS | |
| STATION_INFO_TX_PACKETS | |
| STATION_INFO_TX_BITRATE; |
| |
| sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx); |
| sinfo->rx_bytes = sta->rx_bytes; |
| sinfo->tx_bytes = sta->tx_bytes; |
| sinfo->rx_packets = sta->rx_packets; |
| sinfo->tx_packets = sta->tx_packets; |
| |
| if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) { |
| sinfo->filled |= STATION_INFO_SIGNAL; |
| sinfo->signal = (s8)sta->last_signal; |
| } |
| |
| sinfo->txrate.flags = 0; |
| if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS) |
| sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS; |
| if (sta->last_tx_rate.flags & IEEE80211_TX_RC_40_MHZ_WIDTH) |
| sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; |
| if (sta->last_tx_rate.flags & IEEE80211_TX_RC_SHORT_GI) |
| sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; |
| |
| if (!(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) { |
| struct ieee80211_supported_band *sband; |
| sband = sta->local->hw.wiphy->bands[ |
| sta->local->hw.conf.channel->band]; |
| sinfo->txrate.legacy = |
| sband->bitrates[sta->last_tx_rate.idx].bitrate; |
| } else |
| sinfo->txrate.mcs = sta->last_tx_rate.idx; |
| |
| if (ieee80211_vif_is_mesh(&sdata->vif)) { |
| #ifdef CONFIG_MAC80211_MESH |
| sinfo->filled |= STATION_INFO_LLID | |
| STATION_INFO_PLID | |
| STATION_INFO_PLINK_STATE; |
| |
| sinfo->llid = le16_to_cpu(sta->llid); |
| sinfo->plid = le16_to_cpu(sta->plid); |
| sinfo->plink_state = sta->plink_state; |
| #endif |
| } |
| } |
| |
| |
| static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev, |
| int idx, u8 *mac, struct station_info *sinfo) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct sta_info *sta; |
| int ret = -ENOENT; |
| |
| rcu_read_lock(); |
| |
| sta = sta_info_get_by_idx(local, idx, dev); |
| if (sta) { |
| ret = 0; |
| memcpy(mac, sta->sta.addr, ETH_ALEN); |
| sta_set_sinfo(sta, sinfo); |
| } |
| |
| rcu_read_unlock(); |
| |
| return ret; |
| } |
| |
| static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev, |
| u8 *mac, struct station_info *sinfo) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct sta_info *sta; |
| int ret = -ENOENT; |
| |
| rcu_read_lock(); |
| |
| /* XXX: verify sta->dev == dev */ |
| |
| sta = sta_info_get(local, mac); |
| if (sta) { |
| ret = 0; |
| sta_set_sinfo(sta, sinfo); |
| } |
| |
| rcu_read_unlock(); |
| |
| return ret; |
| } |
| |
| /* |
| * This handles both adding a beacon and setting new beacon info |
| */ |
| static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, |
| struct beacon_parameters *params) |
| { |
| struct beacon_data *new, *old; |
| int new_head_len, new_tail_len; |
| int size; |
| int err = -EINVAL; |
| |
| old = sdata->u.ap.beacon; |
| |
| /* head must not be zero-length */ |
| if (params->head && !params->head_len) |
| return -EINVAL; |
| |
| /* |
| * This is a kludge. beacon interval should really be part |
| * of the beacon information. |
| */ |
| if (params->interval && (sdata->local->hw.conf.beacon_int != |
| params->interval)) { |
| sdata->local->hw.conf.beacon_int = params->interval; |
| err = ieee80211_hw_config(sdata->local, |
| IEEE80211_CONF_CHANGE_BEACON_INTERVAL); |
| if (err < 0) |
| return err; |
| /* |
| * We updated some parameter so if below bails out |
| * it's not an error. |
| */ |
| err = 0; |
| } |
| |
| /* Need to have a beacon head if we don't have one yet */ |
| if (!params->head && !old) |
| return err; |
| |
| /* sorry, no way to start beaconing without dtim period */ |
| if (!params->dtim_period && !old) |
| return err; |
| |
| /* new or old head? */ |
| if (params->head) |
| new_head_len = params->head_len; |
| else |
| new_head_len = old->head_len; |
| |
| /* new or old tail? */ |
| if (params->tail || !old) |
| /* params->tail_len will be zero for !params->tail */ |
| new_tail_len = params->tail_len; |
| else |
| new_tail_len = old->tail_len; |
| |
| size = sizeof(*new) + new_head_len + new_tail_len; |
| |
| new = kzalloc(size, GFP_KERNEL); |
| if (!new) |
| return -ENOMEM; |
| |
| /* start filling the new info now */ |
| |
| /* new or old dtim period? */ |
| if (params->dtim_period) |
| new->dtim_period = params->dtim_period; |
| else |
| new->dtim_period = old->dtim_period; |
| |
| /* |
| * pointers go into the block we allocated, |
| * memory is | beacon_data | head | tail | |
| */ |
| new->head = ((u8 *) new) + sizeof(*new); |
| new->tail = new->head + new_head_len; |
| new->head_len = new_head_len; |
| new->tail_len = new_tail_len; |
| |
| /* copy in head */ |
| if (params->head) |
| memcpy(new->head, params->head, new_head_len); |
| else |
| memcpy(new->head, old->head, new_head_len); |
| |
| /* copy in optional tail */ |
| if (params->tail) |
| memcpy(new->tail, params->tail, new_tail_len); |
| else |
| if (old) |
| memcpy(new->tail, old->tail, new_tail_len); |
| |
| rcu_assign_pointer(sdata->u.ap.beacon, new); |
| |
| synchronize_rcu(); |
| |
| kfree(old); |
| |
| return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON | |
| IEEE80211_IFCC_BEACON_ENABLED); |
| } |
| |
| static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, |
| struct beacon_parameters *params) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct beacon_data *old; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_AP) |
| return -EINVAL; |
| |
| old = sdata->u.ap.beacon; |
| |
| if (old) |
| return -EALREADY; |
| |
| return ieee80211_config_beacon(sdata, params); |
| } |
| |
| static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev, |
| struct beacon_parameters *params) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct beacon_data *old; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_AP) |
| return -EINVAL; |
| |
| old = sdata->u.ap.beacon; |
| |
| if (!old) |
| return -ENOENT; |
| |
| return ieee80211_config_beacon(sdata, params); |
| } |
| |
| static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct beacon_data *old; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_AP) |
| return -EINVAL; |
| |
| old = sdata->u.ap.beacon; |
| |
| if (!old) |
| return -ENOENT; |
| |
| rcu_assign_pointer(sdata->u.ap.beacon, NULL); |
| synchronize_rcu(); |
| kfree(old); |
| |
| return ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON_ENABLED); |
| } |
| |
| /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */ |
| struct iapp_layer2_update { |
| u8 da[ETH_ALEN]; /* broadcast */ |
| u8 sa[ETH_ALEN]; /* STA addr */ |
| __be16 len; /* 6 */ |
| u8 dsap; /* 0 */ |
| u8 ssap; /* 0 */ |
| u8 control; |
| u8 xid_info[3]; |
| } __attribute__ ((packed)); |
| |
| static void ieee80211_send_layer2_update(struct sta_info *sta) |
| { |
| struct iapp_layer2_update *msg; |
| struct sk_buff *skb; |
| |
| /* Send Level 2 Update Frame to update forwarding tables in layer 2 |
| * bridge devices */ |
| |
| skb = dev_alloc_skb(sizeof(*msg)); |
| if (!skb) |
| return; |
| msg = (struct iapp_layer2_update *)skb_put(skb, sizeof(*msg)); |
| |
| /* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID) |
| * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */ |
| |
| memset(msg->da, 0xff, ETH_ALEN); |
| memcpy(msg->sa, sta->sta.addr, ETH_ALEN); |
| msg->len = htons(6); |
| msg->dsap = 0; |
| msg->ssap = 0x01; /* NULL LSAP, CR Bit: Response */ |
| msg->control = 0xaf; /* XID response lsb.1111F101. |
| * F=0 (no poll command; unsolicited frame) */ |
| msg->xid_info[0] = 0x81; /* XID format identifier */ |
| msg->xid_info[1] = 1; /* LLC types/classes: Type 1 LLC */ |
| msg->xid_info[2] = 0; /* XID sender's receive window size (RW) */ |
| |
| skb->dev = sta->sdata->dev; |
| skb->protocol = eth_type_trans(skb, sta->sdata->dev); |
| memset(skb->cb, 0, sizeof(skb->cb)); |
| netif_rx(skb); |
| } |
| |
| static void sta_apply_parameters(struct ieee80211_local *local, |
| struct sta_info *sta, |
| struct station_parameters *params) |
| { |
| u32 rates; |
| int i, j; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| |
| sband = local->hw.wiphy->bands[local->oper_channel->band]; |
| |
| /* |
| * FIXME: updating the flags is racy when this function is |
| * called from ieee80211_change_station(), this will |
| * be resolved in a future patch. |
| */ |
| |
| if (params->station_flags & STATION_FLAG_CHANGED) { |
| spin_lock_bh(&sta->lock); |
| sta->flags &= ~WLAN_STA_AUTHORIZED; |
| if (params->station_flags & STATION_FLAG_AUTHORIZED) |
| sta->flags |= WLAN_STA_AUTHORIZED; |
| |
| sta->flags &= ~WLAN_STA_SHORT_PREAMBLE; |
| if (params->station_flags & STATION_FLAG_SHORT_PREAMBLE) |
| sta->flags |= WLAN_STA_SHORT_PREAMBLE; |
| |
| sta->flags &= ~WLAN_STA_WME; |
| if (params->station_flags & STATION_FLAG_WME) |
| sta->flags |= WLAN_STA_WME; |
| |
| sta->flags &= ~WLAN_STA_MFP; |
| if (params->station_flags & STATION_FLAG_MFP) |
| sta->flags |= WLAN_STA_MFP; |
| spin_unlock_bh(&sta->lock); |
| } |
| |
| /* |
| * FIXME: updating the following information is racy when this |
| * function is called from ieee80211_change_station(). |
| * However, all this information should be static so |
| * maybe we should just reject attemps to change it. |
| */ |
| |
| if (params->aid) { |
| sta->sta.aid = params->aid; |
| if (sta->sta.aid > IEEE80211_MAX_AID) |
| sta->sta.aid = 0; /* XXX: should this be an error? */ |
| } |
| |
| if (params->listen_interval >= 0) |
| sta->listen_interval = params->listen_interval; |
| |
| if (params->supported_rates) { |
| rates = 0; |
| |
| for (i = 0; i < params->supported_rates_len; i++) { |
| int rate = (params->supported_rates[i] & 0x7f) * 5; |
| for (j = 0; j < sband->n_bitrates; j++) { |
| if (sband->bitrates[j].bitrate == rate) |
| rates |= BIT(j); |
| } |
| } |
| sta->sta.supp_rates[local->oper_channel->band] = rates; |
| } |
| |
| if (params->ht_capa) |
| ieee80211_ht_cap_ie_to_sta_ht_cap(sband, |
| params->ht_capa, |
| &sta->sta.ht_cap); |
| |
| if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) { |
| switch (params->plink_action) { |
| case PLINK_ACTION_OPEN: |
| mesh_plink_open(sta); |
| break; |
| case PLINK_ACTION_BLOCK: |
| mesh_plink_block(sta); |
| break; |
| } |
| } |
| } |
| |
| static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, |
| u8 *mac, struct station_parameters *params) |
| { |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| struct sta_info *sta; |
| struct ieee80211_sub_if_data *sdata; |
| int err; |
| int layer2_update; |
| |
| /* Prevent a race with changing the rate control algorithm */ |
| if (!netif_running(dev)) |
| return -ENETDOWN; |
| |
| if (params->vlan) { |
| sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN && |
| sdata->vif.type != NL80211_IFTYPE_AP) |
| return -EINVAL; |
| } else |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (compare_ether_addr(mac, dev->dev_addr) == 0) |
| return -EINVAL; |
| |
| if (is_multicast_ether_addr(mac)) |
| return -EINVAL; |
| |
| sta = sta_info_alloc(sdata, mac, GFP_KERNEL); |
| if (!sta) |
| return -ENOMEM; |
| |
| sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC; |
| |
| sta_apply_parameters(local, sta, params); |
| |
| rate_control_rate_init(sta); |
| |
| layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN || |
| sdata->vif.type == NL80211_IFTYPE_AP; |
| |
| rcu_read_lock(); |
| |
| err = sta_info_insert(sta); |
| if (err) { |
| /* STA has been freed */ |
| if (err == -EEXIST && layer2_update) { |
| /* Need to update layer 2 devices on reassociation */ |
| sta = sta_info_get(local, mac); |
| if (sta) |
| ieee80211_send_layer2_update(sta); |
| } |
| rcu_read_unlock(); |
| return err; |
| } |
| |
| if (layer2_update) |
| ieee80211_send_layer2_update(sta); |
| |
| rcu_read_unlock(); |
| |
| return 0; |
| } |
| |
| static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, |
| u8 *mac) |
| { |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| struct ieee80211_sub_if_data *sdata; |
| struct sta_info *sta; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (mac) { |
| rcu_read_lock(); |
| |
| /* XXX: get sta belonging to dev */ |
| sta = sta_info_get(local, mac); |
| if (!sta) { |
| rcu_read_unlock(); |
| return -ENOENT; |
| } |
| |
| sta_info_unlink(&sta); |
| rcu_read_unlock(); |
| |
| sta_info_destroy(sta); |
| } else |
| sta_info_flush(local, sdata); |
| |
| return 0; |
| } |
| |
| static int ieee80211_change_station(struct wiphy *wiphy, |
| struct net_device *dev, |
| u8 *mac, |
| struct station_parameters *params) |
| { |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| struct sta_info *sta; |
| struct ieee80211_sub_if_data *vlansdata; |
| |
| rcu_read_lock(); |
| |
| /* XXX: get sta belonging to dev */ |
| sta = sta_info_get(local, mac); |
| if (!sta) { |
| rcu_read_unlock(); |
| return -ENOENT; |
| } |
| |
| if (params->vlan && params->vlan != sta->sdata->dev) { |
| vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); |
| |
| if (vlansdata->vif.type != NL80211_IFTYPE_AP_VLAN && |
| vlansdata->vif.type != NL80211_IFTYPE_AP) { |
| rcu_read_unlock(); |
| return -EINVAL; |
| } |
| |
| sta->sdata = vlansdata; |
| ieee80211_send_layer2_update(sta); |
| } |
| |
| sta_apply_parameters(local, sta, params); |
| |
| rcu_read_unlock(); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_MAC80211_MESH |
| static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, |
| u8 *dst, u8 *next_hop) |
| { |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| struct ieee80211_sub_if_data *sdata; |
| struct mesh_path *mpath; |
| struct sta_info *sta; |
| int err; |
| |
| if (!netif_running(dev)) |
| return -ENETDOWN; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT) |
| return -ENOTSUPP; |
| |
| rcu_read_lock(); |
| sta = sta_info_get(local, next_hop); |
| if (!sta) { |
| rcu_read_unlock(); |
| return -ENOENT; |
| } |
| |
| err = mesh_path_add(dst, sdata); |
| if (err) { |
| rcu_read_unlock(); |
| return err; |
| } |
| |
| mpath = mesh_path_lookup(dst, sdata); |
| if (!mpath) { |
| rcu_read_unlock(); |
| return -ENXIO; |
| } |
| mesh_path_fix_nexthop(mpath, sta); |
| |
| rcu_read_unlock(); |
| return 0; |
| } |
| |
| static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev, |
| u8 *dst) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (dst) |
| return mesh_path_del(dst, sdata); |
| |
| mesh_path_flush(sdata); |
| return 0; |
| } |
| |
| static int ieee80211_change_mpath(struct wiphy *wiphy, |
| struct net_device *dev, |
| u8 *dst, u8 *next_hop) |
| { |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| struct ieee80211_sub_if_data *sdata; |
| struct mesh_path *mpath; |
| struct sta_info *sta; |
| |
| if (!netif_running(dev)) |
| return -ENETDOWN; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT) |
| return -ENOTSUPP; |
| |
| rcu_read_lock(); |
| |
| sta = sta_info_get(local, next_hop); |
| if (!sta) { |
| rcu_read_unlock(); |
| return -ENOENT; |
| } |
| |
| mpath = mesh_path_lookup(dst, sdata); |
| if (!mpath) { |
| rcu_read_unlock(); |
| return -ENOENT; |
| } |
| |
| mesh_path_fix_nexthop(mpath, sta); |
| |
| rcu_read_unlock(); |
| return 0; |
| } |
| |
| static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, |
| struct mpath_info *pinfo) |
| { |
| if (mpath->next_hop) |
| memcpy(next_hop, mpath->next_hop->sta.addr, ETH_ALEN); |
| else |
| memset(next_hop, 0, ETH_ALEN); |
| |
| pinfo->filled = MPATH_INFO_FRAME_QLEN | |
| MPATH_INFO_DSN | |
| MPATH_INFO_METRIC | |
| MPATH_INFO_EXPTIME | |
| MPATH_INFO_DISCOVERY_TIMEOUT | |
| MPATH_INFO_DISCOVERY_RETRIES | |
| MPATH_INFO_FLAGS; |
| |
| pinfo->frame_qlen = mpath->frame_queue.qlen; |
| pinfo->dsn = mpath->dsn; |
| pinfo->metric = mpath->metric; |
| if (time_before(jiffies, mpath->exp_time)) |
| pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies); |
| pinfo->discovery_timeout = |
| jiffies_to_msecs(mpath->discovery_timeout); |
| pinfo->discovery_retries = mpath->discovery_retries; |
| pinfo->flags = 0; |
| if (mpath->flags & MESH_PATH_ACTIVE) |
| pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE; |
| if (mpath->flags & MESH_PATH_RESOLVING) |
| pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING; |
| if (mpath->flags & MESH_PATH_DSN_VALID) |
| pinfo->flags |= NL80211_MPATH_FLAG_DSN_VALID; |
| if (mpath->flags & MESH_PATH_FIXED) |
| pinfo->flags |= NL80211_MPATH_FLAG_FIXED; |
| if (mpath->flags & MESH_PATH_RESOLVING) |
| pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING; |
| |
| pinfo->flags = mpath->flags; |
| } |
| |
| static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, |
| u8 *dst, u8 *next_hop, struct mpath_info *pinfo) |
| |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct mesh_path *mpath; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT) |
| return -ENOTSUPP; |
| |
| rcu_read_lock(); |
| mpath = mesh_path_lookup(dst, sdata); |
| if (!mpath) { |
| rcu_read_unlock(); |
| return -ENOENT; |
| } |
| memcpy(dst, mpath->dst, ETH_ALEN); |
| mpath_set_pinfo(mpath, next_hop, pinfo); |
| rcu_read_unlock(); |
| return 0; |
| } |
| |
| static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, |
| int idx, u8 *dst, u8 *next_hop, |
| struct mpath_info *pinfo) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct mesh_path *mpath; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT) |
| return -ENOTSUPP; |
| |
| rcu_read_lock(); |
| mpath = mesh_path_lookup_by_idx(idx, sdata); |
| if (!mpath) { |
| rcu_read_unlock(); |
| return -ENOENT; |
| } |
| memcpy(dst, mpath->dst, ETH_ALEN); |
| mpath_set_pinfo(mpath, next_hop, pinfo); |
| rcu_read_unlock(); |
| return 0; |
| } |
| |
| static int ieee80211_get_mesh_params(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct mesh_config *conf) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT) |
| return -ENOTSUPP; |
| memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config)); |
| return 0; |
| } |
| |
| static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask) |
| { |
| return (mask >> (parm-1)) & 0x1; |
| } |
| |
| static int ieee80211_set_mesh_params(struct wiphy *wiphy, |
| struct net_device *dev, |
| const struct mesh_config *nconf, u32 mask) |
| { |
| struct mesh_config *conf; |
| struct ieee80211_sub_if_data *sdata; |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_MESH_POINT) |
| return -ENOTSUPP; |
| |
| /* Set the config options which we are interested in setting */ |
| conf = &(sdata->u.mesh.mshcfg); |
| if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask)) |
| conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout; |
| if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask)) |
| conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout; |
| if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask)) |
| conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout; |
| if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask)) |
| conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks; |
| if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask)) |
| conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries; |
| if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask)) |
| conf->dot11MeshTTL = nconf->dot11MeshTTL; |
| if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask)) |
| conf->auto_open_plinks = nconf->auto_open_plinks; |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask)) |
| conf->dot11MeshHWMPmaxPREQretries = |
| nconf->dot11MeshHWMPmaxPREQretries; |
| if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask)) |
| conf->path_refresh_time = nconf->path_refresh_time; |
| if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask)) |
| conf->min_discovery_timeout = nconf->min_discovery_timeout; |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask)) |
| conf->dot11MeshHWMPactivePathTimeout = |
| nconf->dot11MeshHWMPactivePathTimeout; |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask)) |
| conf->dot11MeshHWMPpreqMinInterval = |
| nconf->dot11MeshHWMPpreqMinInterval; |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, |
| mask)) |
| conf->dot11MeshHWMPnetDiameterTraversalTime = |
| nconf->dot11MeshHWMPnetDiameterTraversalTime; |
| return 0; |
| } |
| |
| #endif |
| |
| static int ieee80211_change_bss(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct bss_parameters *params) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| u32 changed = 0; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_AP) |
| return -EINVAL; |
| |
| if (params->use_cts_prot >= 0) { |
| sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot; |
| changed |= BSS_CHANGED_ERP_CTS_PROT; |
| } |
| if (params->use_short_preamble >= 0) { |
| sdata->vif.bss_conf.use_short_preamble = |
| params->use_short_preamble; |
| changed |= BSS_CHANGED_ERP_PREAMBLE; |
| } |
| if (params->use_short_slot_time >= 0) { |
| sdata->vif.bss_conf.use_short_slot = |
| params->use_short_slot_time; |
| changed |= BSS_CHANGED_ERP_SLOT; |
| } |
| |
| if (params->basic_rates) { |
| int i, j; |
| u32 rates = 0; |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| struct ieee80211_supported_band *sband = |
| wiphy->bands[local->oper_channel->band]; |
| |
| for (i = 0; i < params->basic_rates_len; i++) { |
| int rate = (params->basic_rates[i] & 0x7f) * 5; |
| for (j = 0; j < sband->n_bitrates; j++) { |
| if (sband->bitrates[j].bitrate == rate) |
| rates |= BIT(j); |
| } |
| } |
| sdata->vif.bss_conf.basic_rates = rates; |
| changed |= BSS_CHANGED_BASIC_RATES; |
| } |
| |
| ieee80211_bss_info_change_notify(sdata, changed); |
| |
| return 0; |
| } |
| |
| static int ieee80211_set_txq_params(struct wiphy *wiphy, |
| struct ieee80211_txq_params *params) |
| { |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| struct ieee80211_tx_queue_params p; |
| |
| if (!local->ops->conf_tx) |
| return -EOPNOTSUPP; |
| |
| memset(&p, 0, sizeof(p)); |
| p.aifs = params->aifs; |
| p.cw_max = params->cwmax; |
| p.cw_min = params->cwmin; |
| p.txop = params->txop; |
| if (local->ops->conf_tx(local_to_hw(local), params->queue, &p)) { |
| printk(KERN_DEBUG "%s: failed to set TX queue " |
| "parameters for queue %d\n", local->mdev->name, |
| params->queue); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int ieee80211_set_channel(struct wiphy *wiphy, |
| struct ieee80211_channel *chan, |
| enum nl80211_channel_type channel_type) |
| { |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| |
| local->oper_channel = chan; |
| local->oper_channel_type = channel_type; |
| |
| return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); |
| } |
| |
| static int set_mgmt_extra_ie_sta(struct ieee80211_sub_if_data *sdata, |
| u8 subtype, u8 *ies, size_t ies_len) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| switch (subtype) { |
| case IEEE80211_STYPE_PROBE_REQ >> 4: |
| if (local->ops->hw_scan) |
| break; |
| kfree(ifmgd->ie_probereq); |
| ifmgd->ie_probereq = ies; |
| ifmgd->ie_probereq_len = ies_len; |
| return 0; |
| case IEEE80211_STYPE_PROBE_RESP >> 4: |
| kfree(ifmgd->ie_proberesp); |
| ifmgd->ie_proberesp = ies; |
| ifmgd->ie_proberesp_len = ies_len; |
| return 0; |
| case IEEE80211_STYPE_AUTH >> 4: |
| kfree(ifmgd->ie_auth); |
| ifmgd->ie_auth = ies; |
| ifmgd->ie_auth_len = ies_len; |
| return 0; |
| case IEEE80211_STYPE_ASSOC_REQ >> 4: |
| kfree(ifmgd->ie_assocreq); |
| ifmgd->ie_assocreq = ies; |
| ifmgd->ie_assocreq_len = ies_len; |
| return 0; |
| case IEEE80211_STYPE_REASSOC_REQ >> 4: |
| kfree(ifmgd->ie_reassocreq); |
| ifmgd->ie_reassocreq = ies; |
| ifmgd->ie_reassocreq_len = ies_len; |
| return 0; |
| case IEEE80211_STYPE_DEAUTH >> 4: |
| kfree(ifmgd->ie_deauth); |
| ifmgd->ie_deauth = ies; |
| ifmgd->ie_deauth_len = ies_len; |
| return 0; |
| case IEEE80211_STYPE_DISASSOC >> 4: |
| kfree(ifmgd->ie_disassoc); |
| ifmgd->ie_disassoc = ies; |
| ifmgd->ie_disassoc_len = ies_len; |
| return 0; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| static int ieee80211_set_mgmt_extra_ie(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct mgmt_extra_ie_params *params) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| u8 *ies; |
| size_t ies_len; |
| int ret = -EOPNOTSUPP; |
| |
| if (params->ies) { |
| ies = kmemdup(params->ies, params->ies_len, GFP_KERNEL); |
| if (ies == NULL) |
| return -ENOMEM; |
| ies_len = params->ies_len; |
| } else { |
| ies = NULL; |
| ies_len = 0; |
| } |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_STATION: |
| ret = set_mgmt_extra_ie_sta(sdata, params->subtype, |
| ies, ies_len); |
| break; |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| if (ret) |
| kfree(ies); |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ieee80211_suspend(struct wiphy *wiphy) |
| { |
| return __ieee80211_suspend(wiphy_priv(wiphy)); |
| } |
| |
| static int ieee80211_resume(struct wiphy *wiphy) |
| { |
| return __ieee80211_resume(wiphy_priv(wiphy)); |
| } |
| #else |
| #define ieee80211_suspend NULL |
| #define ieee80211_resume NULL |
| #endif |
| |
| static int ieee80211_scan(struct wiphy *wiphy, |
| struct net_device *dev, |
| struct cfg80211_scan_request *req) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| if (!netif_running(dev)) |
| return -ENETDOWN; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_STATION && |
| sdata->vif.type != NL80211_IFTYPE_ADHOC && |
| sdata->vif.type != NL80211_IFTYPE_MESH_POINT) |
| return -EOPNOTSUPP; |
| |
| return ieee80211_request_scan(sdata, req); |
| } |
| |
| struct cfg80211_ops mac80211_config_ops = { |
| .add_virtual_intf = ieee80211_add_iface, |
| .del_virtual_intf = ieee80211_del_iface, |
| .change_virtual_intf = ieee80211_change_iface, |
| .add_key = ieee80211_add_key, |
| .del_key = ieee80211_del_key, |
| .get_key = ieee80211_get_key, |
| .set_default_key = ieee80211_config_default_key, |
| .set_default_mgmt_key = ieee80211_config_default_mgmt_key, |
| .add_beacon = ieee80211_add_beacon, |
| .set_beacon = ieee80211_set_beacon, |
| .del_beacon = ieee80211_del_beacon, |
| .add_station = ieee80211_add_station, |
| .del_station = ieee80211_del_station, |
| .change_station = ieee80211_change_station, |
| .get_station = ieee80211_get_station, |
| .dump_station = ieee80211_dump_station, |
| #ifdef CONFIG_MAC80211_MESH |
| .add_mpath = ieee80211_add_mpath, |
| .del_mpath = ieee80211_del_mpath, |
| .change_mpath = ieee80211_change_mpath, |
| .get_mpath = ieee80211_get_mpath, |
| .dump_mpath = ieee80211_dump_mpath, |
| .set_mesh_params = ieee80211_set_mesh_params, |
| .get_mesh_params = ieee80211_get_mesh_params, |
| #endif |
| .change_bss = ieee80211_change_bss, |
| .set_txq_params = ieee80211_set_txq_params, |
| .set_channel = ieee80211_set_channel, |
| .set_mgmt_extra_ie = ieee80211_set_mgmt_extra_ie, |
| .suspend = ieee80211_suspend, |
| .resume = ieee80211_resume, |
| .scan = ieee80211_scan, |
| }; |