| /* |
| * STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net) |
| * |
| * Thanks to STMicroelectronics for information on the usb commands, and |
| * to Steve Miller at STM for his help and encouragement while I was |
| * writing this driver. |
| * |
| * This driver is based heavily on the |
| * Endpoints (formerly known as AOX) se401 USB Camera Driver |
| * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) |
| * |
| * Still somewhat based on the Linux ov511 driver. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * History: |
| * ver 0.1 October, 2001. Initial attempt. |
| * |
| * ver 0.2 November, 2001. Fixed asbility to resize, added brightness |
| * function, made more stable (?) |
| * |
| * ver 0.21 Nov, 2001. Added gamma correction and white balance, |
| * due to Alexander Schwartz. Still trying to |
| * improve stablility. Moved stuff into stv680.h |
| * |
| * ver 0.22 Nov, 2001. Added sharpen function (by Michael Sweet, |
| * mike@easysw.com) from GIMP, also used in pencam. |
| * Simple, fast, good integer math routine. |
| * |
| * ver 0.23 Dec, 2001 (gkh) |
| * Took out sharpen function, ran code through |
| * Lindent, and did other minor tweaks to get |
| * things to work properly with 2.5.1 |
| * |
| * ver 0.24 Jan, 2002 (kjs) |
| * Fixed the problem with webcam crashing after |
| * two pictures. Changed the way pic is halved to |
| * improve quality. Got rid of green line around |
| * frame. Fix brightness reset when changing size |
| * bug. Adjusted gamma filters slightly. |
| * |
| * ver 0.25 Jan, 2002 (kjs) |
| * Fixed a bug in which the driver sometimes attempted |
| * to set to a non-supported size. This allowed |
| * gnomemeeting to work. |
| * Fixed proc entry removal bug. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/vmalloc.h> |
| #include <linux/slab.h> |
| #include <linux/pagemap.h> |
| #include <linux/errno.h> |
| #include <linux/videodev.h> |
| #include <media/v4l2-common.h> |
| #include <linux/usb.h> |
| #include <linux/mutex.h> |
| |
| #include "stv680.h" |
| |
| static int video_nr = -1; |
| static int swapRGB = 0; /* default for auto sleect */ |
| static int swapRGB_on = 0; /* default to allow auto select; -1=swap never, +1= swap always */ |
| |
| static unsigned int debug = 0; |
| |
| #define PDEBUG(level, fmt, args...) \ |
| do { \ |
| if (debug >= level) \ |
| info("[%s:%d] " fmt, __FUNCTION__, __LINE__ , ## args); \ |
| } while (0) |
| |
| |
| /* |
| * Version Information |
| */ |
| #define DRIVER_VERSION "v0.25" |
| #define DRIVER_AUTHOR "Kevin Sisson <kjsisson@bellsouth.net>" |
| #define DRIVER_DESC "STV0680 USB Camera Driver" |
| |
| MODULE_AUTHOR (DRIVER_AUTHOR); |
| MODULE_DESCRIPTION (DRIVER_DESC); |
| MODULE_LICENSE ("GPL"); |
| module_param(debug, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC (debug, "Debug enabled or not"); |
| module_param(swapRGB_on, int, 0); |
| MODULE_PARM_DESC (swapRGB_on, "Red/blue swap: 1=always, 0=auto, -1=never"); |
| module_param(video_nr, int, 0); |
| |
| /******************************************************************** |
| * |
| * Memory management |
| * |
| * This is a shameless copy from the USB-cpia driver (linux kernel |
| * version 2.3.29 or so, I have no idea what this code actually does ;). |
| * Actually it seems to be a copy of a shameless copy of the bttv-driver. |
| * Or that is a copy of a shameless copy of ... (To the powers: is there |
| * no generic kernel-function to do this sort of stuff?) |
| * |
| * Yes, it was a shameless copy from the bttv-driver. IIRC, Alan says |
| * there will be one, but apparentely not yet -jerdfelt |
| * |
| * So I copied it again for the ov511 driver -claudio |
| * |
| * Same for the se401 driver -Jeroen |
| * |
| * And the STV0680 driver - Kevin |
| ********************************************************************/ |
| static void *rvmalloc (unsigned long size) |
| { |
| void *mem; |
| unsigned long adr; |
| |
| size = PAGE_ALIGN(size); |
| mem = vmalloc_32 (size); |
| if (!mem) |
| return NULL; |
| |
| memset (mem, 0, size); /* Clear the ram out, no junk to the user */ |
| adr = (unsigned long) mem; |
| while (size > 0) { |
| SetPageReserved(vmalloc_to_page((void *)adr)); |
| adr += PAGE_SIZE; |
| size -= PAGE_SIZE; |
| } |
| return mem; |
| } |
| |
| static void rvfree (void *mem, unsigned long size) |
| { |
| unsigned long adr; |
| |
| if (!mem) |
| return; |
| |
| adr = (unsigned long) mem; |
| while ((long) size > 0) { |
| ClearPageReserved(vmalloc_to_page((void *)adr)); |
| adr += PAGE_SIZE; |
| size -= PAGE_SIZE; |
| } |
| vfree (mem); |
| } |
| |
| |
| /********************************************************************* |
| * pencam read/write functions |
| ********************************************************************/ |
| |
| static int stv_sndctrl (int set, struct usb_stv *stv680, unsigned short req, unsigned short value, unsigned char *buffer, int size) |
| { |
| int ret = -1; |
| |
| switch (set) { |
| case 0: /* 0xc1 */ |
| ret = usb_control_msg (stv680->udev, |
| usb_rcvctrlpipe (stv680->udev, 0), |
| req, |
| (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), |
| value, 0, buffer, size, PENCAM_TIMEOUT); |
| break; |
| |
| case 1: /* 0x41 */ |
| ret = usb_control_msg (stv680->udev, |
| usb_sndctrlpipe (stv680->udev, 0), |
| req, |
| (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT), |
| value, 0, buffer, size, PENCAM_TIMEOUT); |
| break; |
| |
| case 2: /* 0x80 */ |
| ret = usb_control_msg (stv680->udev, |
| usb_rcvctrlpipe (stv680->udev, 0), |
| req, |
| (USB_DIR_IN | USB_RECIP_DEVICE), |
| value, 0, buffer, size, PENCAM_TIMEOUT); |
| break; |
| |
| case 3: /* 0x40 */ |
| ret = usb_control_msg (stv680->udev, |
| usb_sndctrlpipe (stv680->udev, 0), |
| req, |
| (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE), |
| value, 0, buffer, size, PENCAM_TIMEOUT); |
| break; |
| |
| } |
| if ((ret < 0) && (req != 0x0a)) { |
| PDEBUG (1, "STV(e): usb_control_msg error %i, request = 0x%x, error = %i", set, req, ret); |
| } |
| return ret; |
| } |
| |
| static int stv_set_config (struct usb_stv *dev, int configuration, int interface, int alternate) |
| { |
| |
| if (configuration != dev->udev->actconfig->desc.bConfigurationValue |
| || usb_reset_configuration (dev->udev) < 0) { |
| PDEBUG (1, "STV(e): FAILED to reset configuration %i", configuration); |
| return -1; |
| } |
| if (usb_set_interface (dev->udev, interface, alternate) < 0) { |
| PDEBUG (1, "STV(e): FAILED to set alternate interface %i", alternate); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int stv_stop_video (struct usb_stv *dev) |
| { |
| int i; |
| unsigned char *buf; |
| |
| buf = kmalloc (40, GFP_KERNEL); |
| if (buf == NULL) { |
| PDEBUG (0, "STV(e): Out of (small buf) memory"); |
| return -1; |
| } |
| |
| /* this is a high priority command; it stops all lower order commands */ |
| if ((i = stv_sndctrl (1, dev, 0x04, 0x0000, buf, 0x0)) < 0) { |
| i = stv_sndctrl (0, dev, 0x80, 0, buf, 0x02); /* Get Last Error; 2 = busy */ |
| PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buf[0], buf[1]); |
| } else { |
| PDEBUG (1, "STV(i): Camera reset to idle mode."); |
| } |
| |
| if ((i = stv_set_config (dev, 1, 0, 0)) < 0) |
| PDEBUG (1, "STV(e): Reset config during exit failed"); |
| |
| /* get current mode */ |
| buf[0] = 0xf0; |
| if ((i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08)) != 0x08) /* get mode */ |
| PDEBUG (0, "STV(e): Stop_video: problem setting original mode"); |
| if (dev->origMode != buf[0]) { |
| memset (buf, 0, 8); |
| buf[0] = (unsigned char) dev->origMode; |
| if ((i = stv_sndctrl (3, dev, 0x07, 0x0100, buf, 0x08)) != 0x08) { |
| PDEBUG (0, "STV(e): Stop_video: Set_Camera_Mode failed"); |
| i = -1; |
| } |
| buf[0] = 0xf0; |
| i = stv_sndctrl (0, dev, 0x87, 0, buf, 0x08); |
| if ((i != 0x08) || (buf[0] != dev->origMode)) { |
| PDEBUG (0, "STV(e): camera NOT set to original resolution."); |
| i = -1; |
| } else |
| PDEBUG (0, "STV(i): Camera set to original resolution"); |
| } |
| /* origMode */ |
| kfree(buf); |
| return i; |
| } |
| |
| static int stv_set_video_mode (struct usb_stv *dev) |
| { |
| int i, stop_video = 1; |
| unsigned char *buf; |
| |
| buf = kmalloc (40, GFP_KERNEL); |
| if (buf == NULL) { |
| PDEBUG (0, "STV(e): Out of (small buf) memory"); |
| return -1; |
| } |
| |
| if ((i = stv_set_config (dev, 1, 0, 0)) < 0) { |
| kfree(buf); |
| return i; |
| } |
| |
| i = stv_sndctrl (2, dev, 0x06, 0x0100, buf, 0x12); |
| if (!(i > 0) && (buf[8] == 0x53) && (buf[9] == 0x05)) { |
| PDEBUG (1, "STV(e): Could not get descriptor 0100."); |
| goto error; |
| } |
| |
| /* set alternate interface 1 */ |
| if ((i = stv_set_config (dev, 1, 0, 1)) < 0) |
| goto error; |
| |
| if ((i = stv_sndctrl (0, dev, 0x85, 0, buf, 0x10)) != 0x10) |
| goto error; |
| PDEBUG (1, "STV(i): Setting video mode."); |
| /* Switch to Video mode: 0x0100 = VGA (640x480), 0x0000 = CIF (352x288) 0x0300 = QVGA (320x240) */ |
| if ((i = stv_sndctrl (1, dev, 0x09, dev->VideoMode, buf, 0x0)) < 0) { |
| stop_video = 0; |
| goto error; |
| } |
| goto exit; |
| |
| error: |
| kfree(buf); |
| if (stop_video == 1) |
| stv_stop_video (dev); |
| return -1; |
| |
| exit: |
| kfree(buf); |
| return 0; |
| } |
| |
| static int stv_init (struct usb_stv *stv680) |
| { |
| int i = 0; |
| unsigned char *buffer; |
| unsigned long int bufsize; |
| |
| buffer = kzalloc (40, GFP_KERNEL); |
| if (buffer == NULL) { |
| PDEBUG (0, "STV(e): Out of (small buf) memory"); |
| return -1; |
| } |
| udelay (100); |
| |
| /* set config 1, interface 0, alternate 0 */ |
| if ((i = stv_set_config (stv680, 1, 0, 0)) < 0) { |
| kfree(buffer); |
| PDEBUG (0, "STV(e): set config 1,0,0 failed"); |
| return -1; |
| } |
| /* ping camera to be sure STV0680 is present */ |
| if ((i = stv_sndctrl (0, stv680, 0x88, 0x5678, buffer, 0x02)) != 0x02) |
| goto error; |
| if ((buffer[0] != 0x56) || (buffer[1] != 0x78)) { |
| PDEBUG (1, "STV(e): camera ping failed!!"); |
| goto error; |
| } |
| |
| /* get camera descriptor */ |
| if ((i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x09)) != 0x09) |
| goto error; |
| i = stv_sndctrl (2, stv680, 0x06, 0x0200, buffer, 0x22); |
| if (!(i >= 0) && (buffer[7] == 0xa0) && (buffer[8] == 0x23)) { |
| PDEBUG (1, "STV(e): Could not get descriptor 0200."); |
| goto error; |
| } |
| if ((i = stv_sndctrl (0, stv680, 0x8a, 0, buffer, 0x02)) != 0x02) |
| goto error; |
| if ((i = stv_sndctrl (0, stv680, 0x8b, 0, buffer, 0x24)) != 0x24) |
| goto error; |
| if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) |
| goto error; |
| |
| stv680->SupportedModes = buffer[7]; |
| i = stv680->SupportedModes; |
| stv680->CIF = 0; |
| stv680->VGA = 0; |
| stv680->QVGA = 0; |
| if (i & 1) |
| stv680->CIF = 1; |
| if (i & 2) |
| stv680->VGA = 1; |
| if (i & 8) |
| stv680->QVGA = 1; |
| if (stv680->SupportedModes == 0) { |
| PDEBUG (0, "STV(e): There are NO supported STV680 modes!!"); |
| i = -1; |
| goto error; |
| } else { |
| if (stv680->CIF) |
| PDEBUG (0, "STV(i): CIF is supported"); |
| if (stv680->QVGA) |
| PDEBUG (0, "STV(i): QVGA is supported"); |
| } |
| /* FW rev, ASIC rev, sensor ID */ |
| PDEBUG (1, "STV(i): Firmware rev is %i.%i", buffer[0], buffer[1]); |
| PDEBUG (1, "STV(i): ASIC rev is %i.%i", buffer[2], buffer[3]); |
| PDEBUG (1, "STV(i): Sensor ID is %i", (buffer[4]*16) + (buffer[5]>>4)); |
| |
| /* set alternate interface 1 */ |
| if ((i = stv_set_config (stv680, 1, 0, 1)) < 0) |
| goto error; |
| |
| if ((i = stv_sndctrl (0, stv680, 0x85, 0, buffer, 0x10)) != 0x10) |
| goto error; |
| if ((i = stv_sndctrl (0, stv680, 0x8d, 0, buffer, 0x08)) != 0x08) |
| goto error; |
| i = buffer[3]; |
| PDEBUG (0, "STV(i): Camera has %i pictures.", i); |
| |
| /* get current mode */ |
| if ((i = stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08)) != 0x08) |
| goto error; |
| stv680->origMode = buffer[0]; /* 01 = VGA, 03 = QVGA, 00 = CIF */ |
| |
| /* This will attemp CIF mode, if supported. If not, set to QVGA */ |
| memset (buffer, 0, 8); |
| if (stv680->CIF) |
| buffer[0] = 0x00; |
| else if (stv680->QVGA) |
| buffer[0] = 0x03; |
| if ((i = stv_sndctrl (3, stv680, 0x07, 0x0100, buffer, 0x08)) != 0x08) { |
| PDEBUG (0, "STV(i): Set_Camera_Mode failed"); |
| i = -1; |
| goto error; |
| } |
| buffer[0] = 0xf0; |
| stv_sndctrl (0, stv680, 0x87, 0, buffer, 0x08); |
| if (((stv680->CIF == 1) && (buffer[0] != 0x00)) || ((stv680->QVGA == 1) && (buffer[0] != 0x03))) { |
| PDEBUG (0, "STV(e): Error setting camera video mode!"); |
| i = -1; |
| goto error; |
| } else { |
| if (buffer[0] == 0) { |
| stv680->VideoMode = 0x0000; |
| PDEBUG (0, "STV(i): Video Mode set to CIF"); |
| } |
| if (buffer[0] == 0x03) { |
| stv680->VideoMode = 0x0300; |
| PDEBUG (0, "STV(i): Video Mode set to QVGA"); |
| } |
| } |
| if ((i = stv_sndctrl (0, stv680, 0x8f, 0, buffer, 0x10)) != 0x10) |
| goto error; |
| bufsize = (buffer[0] << 24) | (buffer[1] << 16) | (buffer[2] << 8) | (buffer[3]); |
| stv680->cwidth = (buffer[4] << 8) | (buffer[5]); /* ->camera = 322, 356, 644 */ |
| stv680->cheight = (buffer[6] << 8) | (buffer[7]); /* ->camera = 242, 292, 484 */ |
| stv680->origGain = buffer[12]; |
| |
| goto exit; |
| |
| error: |
| i = stv_sndctrl (0, stv680, 0x80, 0, buffer, 0x02); /* Get Last Error */ |
| PDEBUG (1, "STV(i): last error: %i, command = 0x%x", buffer[0], buffer[1]); |
| kfree(buffer); |
| return -1; |
| |
| exit: |
| kfree(buffer); |
| |
| /* video = 320x240, 352x288 */ |
| if (stv680->CIF == 1) { |
| stv680->maxwidth = 352; |
| stv680->maxheight = 288; |
| stv680->vwidth = 352; |
| stv680->vheight = 288; |
| } |
| if (stv680->QVGA == 1) { |
| stv680->maxwidth = 320; |
| stv680->maxheight = 240; |
| stv680->vwidth = 320; |
| stv680->vheight = 240; |
| } |
| |
| stv680->rawbufsize = bufsize; /* must be ./. by 8 */ |
| stv680->maxframesize = bufsize * 3; /* RGB size */ |
| PDEBUG (2, "STV(i): cwidth = %i, cheight = %i", stv680->cwidth, stv680->cheight); |
| PDEBUG (1, "STV(i): width = %i, height = %i, rawbufsize = %li", stv680->vwidth, stv680->vheight, stv680->rawbufsize); |
| |
| /* some default values */ |
| stv680->bulk_in_endpointAddr = 0x82; |
| stv680->dropped = 0; |
| stv680->error = 0; |
| stv680->framecount = 0; |
| stv680->readcount = 0; |
| stv680->streaming = 0; |
| /* bright, white, colour, hue, contrast are set by software, not in stv0680 */ |
| stv680->brightness = 32767; |
| stv680->chgbright = 0; |
| stv680->whiteness = 0; /* only for greyscale */ |
| stv680->colour = 32767; |
| stv680->contrast = 32767; |
| stv680->hue = 32767; |
| stv680->palette = STV_VIDEO_PALETTE; |
| stv680->depth = 24; /* rgb24 bits */ |
| if ((swapRGB_on == 0) && (swapRGB == 0)) |
| PDEBUG (1, "STV(i): swapRGB is (auto) OFF"); |
| else if ((swapRGB_on == 0) && (swapRGB == 1)) |
| PDEBUG (1, "STV(i): swapRGB is (auto) ON"); |
| else if (swapRGB_on == 1) |
| PDEBUG (1, "STV(i): swapRGB is (forced) ON"); |
| else if (swapRGB_on == -1) |
| PDEBUG (1, "STV(i): swapRGB is (forced) OFF"); |
| |
| if (stv_set_video_mode (stv680) < 0) { |
| PDEBUG (0, "STV(e): Could not set video mode in stv_init"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /***************** last of pencam routines *******************/ |
| |
| /**************************************************************************** |
| * sysfs |
| ***************************************************************************/ |
| #define stv680_file(name, variable, field) \ |
| static ssize_t show_##name(struct class_device *class_dev, char *buf) \ |
| { \ |
| struct video_device *vdev = to_video_device(class_dev); \ |
| struct usb_stv *stv = video_get_drvdata(vdev); \ |
| return sprintf(buf, field, stv->variable); \ |
| } \ |
| static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); |
| |
| stv680_file(model, camera_name, "%s\n"); |
| stv680_file(in_use, user, "%d\n"); |
| stv680_file(streaming, streaming, "%d\n"); |
| stv680_file(palette, palette, "%i\n"); |
| stv680_file(frames_total, readcount, "%d\n"); |
| stv680_file(frames_read, framecount, "%d\n"); |
| stv680_file(packets_dropped, dropped, "%d\n"); |
| stv680_file(decoding_errors, error, "%d\n"); |
| |
| static void stv680_create_sysfs_files(struct video_device *vdev) |
| { |
| video_device_create_file(vdev, &class_device_attr_model); |
| video_device_create_file(vdev, &class_device_attr_in_use); |
| video_device_create_file(vdev, &class_device_attr_streaming); |
| video_device_create_file(vdev, &class_device_attr_palette); |
| video_device_create_file(vdev, &class_device_attr_frames_total); |
| video_device_create_file(vdev, &class_device_attr_frames_read); |
| video_device_create_file(vdev, &class_device_attr_packets_dropped); |
| video_device_create_file(vdev, &class_device_attr_decoding_errors); |
| } |
| |
| static void stv680_remove_sysfs_files(struct video_device *vdev) |
| { |
| video_device_remove_file(vdev, &class_device_attr_model); |
| video_device_remove_file(vdev, &class_device_attr_in_use); |
| video_device_remove_file(vdev, &class_device_attr_streaming); |
| video_device_remove_file(vdev, &class_device_attr_palette); |
| video_device_remove_file(vdev, &class_device_attr_frames_total); |
| video_device_remove_file(vdev, &class_device_attr_frames_read); |
| video_device_remove_file(vdev, &class_device_attr_packets_dropped); |
| video_device_remove_file(vdev, &class_device_attr_decoding_errors); |
| } |
| |
| /******************************************************************** |
| * Camera control |
| *******************************************************************/ |
| |
| static int stv680_get_pict (struct usb_stv *stv680, struct video_picture *p) |
| { |
| /* This sets values for v4l interface. max/min = 65535/0 */ |
| |
| p->brightness = stv680->brightness; |
| p->whiteness = stv680->whiteness; /* greyscale */ |
| p->colour = stv680->colour; |
| p->contrast = stv680->contrast; |
| p->hue = stv680->hue; |
| p->palette = stv680->palette; |
| p->depth = stv680->depth; |
| return 0; |
| } |
| |
| static int stv680_set_pict (struct usb_stv *stv680, struct video_picture *p) |
| { |
| /* See above stv680_get_pict */ |
| |
| if (p->palette != STV_VIDEO_PALETTE) { |
| PDEBUG (2, "STV(e): Palette set error in _set_pic"); |
| return 1; |
| } |
| |
| if (stv680->brightness != p->brightness) { |
| stv680->chgbright = 1; |
| stv680->brightness = p->brightness; |
| } |
| |
| stv680->whiteness = p->whiteness; /* greyscale */ |
| stv680->colour = p->colour; |
| stv680->contrast = p->contrast; |
| stv680->hue = p->hue; |
| stv680->palette = p->palette; |
| stv680->depth = p->depth; |
| |
| return 0; |
| } |
| |
| static void stv680_video_irq (struct urb *urb, struct pt_regs *regs) |
| { |
| struct usb_stv *stv680 = urb->context; |
| int length = urb->actual_length; |
| |
| if (length < stv680->rawbufsize) |
| PDEBUG (2, "STV(i): Lost data in transfer: exp %li, got %i", stv680->rawbufsize, length); |
| |
| /* ohoh... */ |
| if (!stv680->streaming) |
| return; |
| |
| if (!stv680->udev) { |
| PDEBUG (0, "STV(e): device vapourished in video_irq"); |
| return; |
| } |
| |
| /* 0 sized packets happen if we are to fast, but sometimes the camera |
| keeps sending them forever... |
| */ |
| if (length && !urb->status) { |
| stv680->nullpackets = 0; |
| switch (stv680->scratch[stv680->scratch_next].state) { |
| case BUFFER_READY: |
| case BUFFER_BUSY: |
| stv680->dropped++; |
| break; |
| |
| case BUFFER_UNUSED: |
| memcpy (stv680->scratch[stv680->scratch_next].data, |
| (unsigned char *) urb->transfer_buffer, length); |
| stv680->scratch[stv680->scratch_next].state = BUFFER_READY; |
| stv680->scratch[stv680->scratch_next].length = length; |
| if (waitqueue_active (&stv680->wq)) { |
| wake_up_interruptible (&stv680->wq); |
| } |
| stv680->scratch_overflow = 0; |
| stv680->scratch_next++; |
| if (stv680->scratch_next >= STV680_NUMSCRATCH) |
| stv680->scratch_next = 0; |
| break; |
| } /* switch */ |
| } else { |
| stv680->nullpackets++; |
| if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { |
| if (waitqueue_active (&stv680->wq)) { |
| wake_up_interruptible (&stv680->wq); |
| } |
| } |
| } /* if - else */ |
| |
| /* Resubmit urb for new data */ |
| urb->status = 0; |
| urb->dev = stv680->udev; |
| if (usb_submit_urb (urb, GFP_ATOMIC)) |
| PDEBUG (0, "STV(e): urb burned down in video irq"); |
| return; |
| } /* _video_irq */ |
| |
| static int stv680_start_stream (struct usb_stv *stv680) |
| { |
| struct urb *urb; |
| int err = 0, i; |
| |
| stv680->streaming = 1; |
| |
| /* Do some memory allocation */ |
| for (i = 0; i < STV680_NUMFRAMES; i++) { |
| stv680->frame[i].data = stv680->fbuf + i * stv680->maxframesize; |
| stv680->frame[i].curpix = 0; |
| } |
| /* packet size = 4096 */ |
| for (i = 0; i < STV680_NUMSBUF; i++) { |
| stv680->sbuf[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); |
| if (stv680->sbuf[i].data == NULL) { |
| PDEBUG (0, "STV(e): Could not kmalloc raw data buffer %i", i); |
| return -1; |
| } |
| } |
| |
| stv680->scratch_next = 0; |
| stv680->scratch_use = 0; |
| stv680->scratch_overflow = 0; |
| for (i = 0; i < STV680_NUMSCRATCH; i++) { |
| stv680->scratch[i].data = kmalloc (stv680->rawbufsize, GFP_KERNEL); |
| if (stv680->scratch[i].data == NULL) { |
| PDEBUG (0, "STV(e): Could not kmalloc raw scratch buffer %i", i); |
| return -1; |
| } |
| stv680->scratch[i].state = BUFFER_UNUSED; |
| } |
| |
| for (i = 0; i < STV680_NUMSBUF; i++) { |
| urb = usb_alloc_urb (0, GFP_KERNEL); |
| if (!urb) |
| return -ENOMEM; |
| |
| /* sbuf is urb->transfer_buffer, later gets memcpyed to scratch */ |
| usb_fill_bulk_urb (urb, stv680->udev, |
| usb_rcvbulkpipe (stv680->udev, stv680->bulk_in_endpointAddr), |
| stv680->sbuf[i].data, stv680->rawbufsize, |
| stv680_video_irq, stv680); |
| stv680->urb[i] = urb; |
| err = usb_submit_urb (stv680->urb[i], GFP_KERNEL); |
| if (err) |
| PDEBUG (0, "STV(e): urb burned down in start stream"); |
| } /* i STV680_NUMSBUF */ |
| |
| stv680->framecount = 0; |
| return 0; |
| } |
| |
| static int stv680_stop_stream (struct usb_stv *stv680) |
| { |
| int i; |
| |
| if (!stv680->streaming || !stv680->udev) |
| return 1; |
| |
| stv680->streaming = 0; |
| |
| for (i = 0; i < STV680_NUMSBUF; i++) |
| if (stv680->urb[i]) { |
| usb_kill_urb (stv680->urb[i]); |
| usb_free_urb (stv680->urb[i]); |
| stv680->urb[i] = NULL; |
| kfree(stv680->sbuf[i].data); |
| } |
| for (i = 0; i < STV680_NUMSCRATCH; i++) { |
| kfree(stv680->scratch[i].data); |
| stv680->scratch[i].data = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static int stv680_set_size (struct usb_stv *stv680, int width, int height) |
| { |
| int wasstreaming = stv680->streaming; |
| |
| /* Check to see if we need to change */ |
| if ((stv680->vwidth == width) && (stv680->vheight == height)) |
| return 0; |
| |
| PDEBUG (1, "STV(i): size request for %i x %i", width, height); |
| /* Check for a valid mode */ |
| if ((!width || !height) || ((width & 1) || (height & 1))) { |
| PDEBUG (1, "STV(e): set_size error: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); |
| return 1; |
| } |
| |
| if ((width < (stv680->maxwidth / 2)) || (height < (stv680->maxheight / 2))) { |
| width = stv680->maxwidth / 2; |
| height = stv680->maxheight / 2; |
| } else if ((width >= 158) && (width <= 166) && (stv680->QVGA == 1)) { |
| width = 160; |
| height = 120; |
| } else if ((width >= 172) && (width <= 180) && (stv680->CIF == 1)) { |
| width = 176; |
| height = 144; |
| } else if ((width >= 318) && (width <= 350) && (stv680->QVGA == 1)) { |
| width = 320; |
| height = 240; |
| } else if ((width >= 350) && (width <= 358) && (stv680->CIF == 1)) { |
| width = 352; |
| height = 288; |
| } else { |
| PDEBUG (1, "STV(e): request for non-supported size: request: v.width = %i, v.height = %i actual: stv.width = %i, stv.height = %i", width, height, stv680->vwidth, stv680->vheight); |
| return 1; |
| } |
| |
| /* Stop a current stream and start it again at the new size */ |
| if (wasstreaming) |
| stv680_stop_stream (stv680); |
| stv680->vwidth = width; |
| stv680->vheight = height; |
| PDEBUG (1, "STV(i): size set to %i x %i", stv680->vwidth, stv680->vheight); |
| if (wasstreaming) |
| stv680_start_stream (stv680); |
| |
| return 0; |
| } |
| |
| /********************************************************************** |
| * Video Decoding |
| **********************************************************************/ |
| |
| /******* routines from the pencam program; hey, they work! ********/ |
| |
| /* |
| * STV0680 Vision Camera Chipset Driver |
| * Copyright (C) 2000 Adam Harrison <adam@antispin.org> |
| */ |
| |
| #define RED 0 |
| #define GREEN 1 |
| #define BLUE 2 |
| #define AD(x, y, w) (((y)*(w)+(x))*3) |
| |
| static void bayer_unshuffle (struct usb_stv *stv680, struct stv680_scratch *buffer) |
| { |
| int x, y, i; |
| int w = stv680->cwidth; |
| int vw = stv680->cwidth, vh = stv680->cheight; |
| unsigned int p = 0; |
| int colour = 0, bayer = 0; |
| unsigned char *raw = buffer->data; |
| struct stv680_frame *frame = &stv680->frame[stv680->curframe]; |
| unsigned char *output = frame->data; |
| unsigned char *temp = frame->data; |
| int offset = buffer->offset; |
| |
| if (frame->curpix == 0) { |
| if (frame->grabstate == FRAME_READY) { |
| frame->grabstate = FRAME_GRABBING; |
| } |
| } |
| if (offset != frame->curpix) { /* Regard frame as lost :( */ |
| frame->curpix = 0; |
| stv680->error++; |
| return; |
| } |
| |
| if ((stv680->vwidth == 320) || (stv680->vwidth == 160)) { |
| vw = 320; |
| vh = 240; |
| } |
| if ((stv680->vwidth == 352) || (stv680->vwidth == 176)) { |
| vw = 352; |
| vh = 288; |
| } |
| |
| memset (output, 0, 3 * vw * vh); /* clear output matrix. */ |
| |
| for (y = 0; y < vh; y++) { |
| for (x = 0; x < vw; x++) { |
| if (x & 1) |
| p = *(raw + y * w + (x >> 1)); |
| else |
| p = *(raw + y * w + (x >> 1) + (w >> 1)); |
| |
| if (y & 1) |
| bayer = 2; |
| else |
| bayer = 0; |
| if (x & 1) |
| bayer++; |
| |
| switch (bayer) { |
| case 0: |
| case 3: |
| colour = 1; |
| break; |
| case 1: |
| colour = 0; |
| break; |
| case 2: |
| colour = 2; |
| break; |
| } |
| i = (y * vw + x) * 3; |
| *(output + i + colour) = (unsigned char) p; |
| } /* for x */ |
| |
| } /* for y */ |
| |
| /****** gamma correction plus hardcoded white balance */ |
| /* Thanks to Alexander Schwartx <alexander.schwartx@gmx.net> for this code. |
| Correction values red[], green[], blue[], are generated by |
| (pow(i/256.0, GAMMA)*255.0)*white balanceRGB where GAMMA=0.55, 1<i<255. |
| White balance (RGB)= 1.0, 1.17, 1.48. Values are calculated as double float and |
| converted to unsigned char. Values are in stv680.h */ |
| |
| for (y = 0; y < vh; y++) { |
| for (x = 0; x < vw; x++) { |
| i = (y * vw + x) * 3; |
| *(output + i) = red[*(output + i)]; |
| *(output + i + 1) = green[*(output + i + 1)]; |
| *(output + i + 2) = blue[*(output + i + 2)]; |
| } |
| } |
| |
| /****** bayer demosaic ******/ |
| for (y = 1; y < (vh - 1); y++) { |
| for (x = 1; x < (vw - 1); x++) { /* work out pixel type */ |
| if (y & 1) |
| bayer = 0; |
| else |
| bayer = 2; |
| if (!(x & 1)) |
| bayer++; |
| |
| switch (bayer) { |
| case 0: /* green. blue lr, red tb */ |
| *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y, vw) + BLUE) + (int) *(output + AD (x + 1, y, vw) + BLUE)) >> 1; |
| *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x, y - 1, vw) + RED) + (int) *(output + AD (x, y + 1, vw) + RED)) >> 1; |
| break; |
| |
| case 1: /* blue. green lrtb, red diagonals */ |
| *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; |
| *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y - 1, vw) + RED) + (int) *(output + AD (x - 1, y + 1, vw) + RED) + (int) *(output + AD (x + 1, y - 1, vw) + RED) + (int) *(output + AD (x + 1, y + 1, vw) + RED)) >> 2; |
| break; |
| |
| case 2: /* red. green lrtb, blue diagonals */ |
| *(output + AD (x, y, vw) + GREEN) = ((int) *(output + AD (x - 1, y, vw) + GREEN) + (int) *(output + AD (x + 1, y, vw) + GREEN) + (int) *(output + AD (x, y - 1, vw) + GREEN) + (int) *(output + AD (x, y + 1, vw) + GREEN)) >> 2; |
| *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x - 1, y - 1, vw) + BLUE) + (int) *(output + AD (x + 1, y - 1, vw) + BLUE) + (int) *(output + AD (x - 1, y + 1, vw) + BLUE) + (int) *(output + AD (x + 1, y + 1, vw) + BLUE)) >> 2; |
| break; |
| |
| case 3: /* green. red lr, blue tb */ |
| *(output + AD (x, y, vw) + RED) = ((int) *(output + AD (x - 1, y, vw) + RED) + (int) *(output + AD (x + 1, y, vw) + RED)) >> 1; |
| *(output + AD (x, y, vw) + BLUE) = ((int) *(output + AD (x, y - 1, vw) + BLUE) + (int) *(output + AD (x, y + 1, vw) + BLUE)) >> 1; |
| break; |
| } /* switch */ |
| } /* for x */ |
| } /* for y - end demosaic */ |
| |
| /* fix top and bottom row, left and right side */ |
| i = vw * 3; |
| memcpy (output, (output + i), i); |
| memcpy ((output + (vh * i)), (output + ((vh - 1) * i)), i); |
| for (y = 0; y < vh; y++) { |
| i = y * vw * 3; |
| memcpy ((output + i), (output + i + 3), 3); |
| memcpy ((output + i + (vw * 3)), (output + i + (vw - 1) * 3), 3); |
| } |
| |
| /* process all raw data, then trim to size if necessary */ |
| if ((stv680->vwidth == 160) || (stv680->vwidth == 176)) { |
| i = 0; |
| for (y = 0; y < vh; y++) { |
| if (!(y & 1)) { |
| for (x = 0; x < vw; x++) { |
| p = (y * vw + x) * 3; |
| if (!(x & 1)) { |
| *(output + i) = *(output + p); |
| *(output + i + 1) = *(output + p + 1); |
| *(output + i + 2) = *(output + p + 2); |
| i += 3; |
| } |
| } /* for x */ |
| } |
| } /* for y */ |
| } |
| /* reset to proper width */ |
| if ((stv680->vwidth == 160)) { |
| vw = 160; |
| vh = 120; |
| } |
| if ((stv680->vwidth == 176)) { |
| vw = 176; |
| vh = 144; |
| } |
| |
| /* output is RGB; some programs want BGR */ |
| /* swapRGB_on=0 -> program decides; swapRGB_on=1, always swap */ |
| /* swapRGB_on=-1, never swap */ |
| if (((swapRGB == 1) && (swapRGB_on != -1)) || (swapRGB_on == 1)) { |
| for (y = 0; y < vh; y++) { |
| for (x = 0; x < vw; x++) { |
| i = (y * vw + x) * 3; |
| *(temp) = *(output + i); |
| *(output + i) = *(output + i + 2); |
| *(output + i + 2) = *(temp); |
| } |
| } |
| } |
| /* brightness */ |
| if (stv680->chgbright == 1) { |
| if (stv680->brightness >= 32767) { |
| p = (stv680->brightness - 32767) / 256; |
| for (x = 0; x < (vw * vh * 3); x++) { |
| if ((*(output + x) + (unsigned char) p) > 255) |
| *(output + x) = 255; |
| else |
| *(output + x) += (unsigned char) p; |
| } /* for */ |
| } else { |
| p = (32767 - stv680->brightness) / 256; |
| for (x = 0; x < (vw * vh * 3); x++) { |
| if ((unsigned char) p > *(output + x)) |
| *(output + x) = 0; |
| else |
| *(output + x) -= (unsigned char) p; |
| } /* for */ |
| } /* else */ |
| } |
| /* if */ |
| frame->curpix = 0; |
| frame->curlinepix = 0; |
| frame->grabstate = FRAME_DONE; |
| stv680->framecount++; |
| stv680->readcount++; |
| if (stv680->frame[(stv680->curframe + 1) & (STV680_NUMFRAMES - 1)].grabstate == FRAME_READY) { |
| stv680->curframe = (stv680->curframe + 1) & (STV680_NUMFRAMES - 1); |
| } |
| |
| } /* bayer_unshuffle */ |
| |
| /******* end routines from the pencam program *********/ |
| |
| static int stv680_newframe (struct usb_stv *stv680, int framenr) |
| { |
| int errors = 0; |
| |
| while (stv680->streaming && (stv680->frame[framenr].grabstate == FRAME_READY || stv680->frame[framenr].grabstate == FRAME_GRABBING)) { |
| if (!stv680->frame[framenr].curpix) { |
| errors++; |
| } |
| wait_event_interruptible (stv680->wq, (stv680->scratch[stv680->scratch_use].state == BUFFER_READY)); |
| |
| if (stv680->nullpackets > STV680_MAX_NULLPACKETS) { |
| stv680->nullpackets = 0; |
| PDEBUG (2, "STV(i): too many null length packets, restarting capture"); |
| stv680_stop_stream (stv680); |
| stv680_start_stream (stv680); |
| } else { |
| if (stv680->scratch[stv680->scratch_use].state != BUFFER_READY) { |
| stv680->frame[framenr].grabstate = FRAME_ERROR; |
| PDEBUG (2, "STV(e): FRAME_ERROR in _newframe"); |
| return -EIO; |
| } |
| stv680->scratch[stv680->scratch_use].state = BUFFER_BUSY; |
| |
| bayer_unshuffle (stv680, &stv680->scratch[stv680->scratch_use]); |
| |
| stv680->scratch[stv680->scratch_use].state = BUFFER_UNUSED; |
| stv680->scratch_use++; |
| if (stv680->scratch_use >= STV680_NUMSCRATCH) |
| stv680->scratch_use = 0; |
| if (errors > STV680_MAX_ERRORS) { |
| errors = 0; |
| PDEBUG (2, "STV(i): too many errors, restarting capture"); |
| stv680_stop_stream (stv680); |
| stv680_start_stream (stv680); |
| } |
| } /* else */ |
| } /* while */ |
| return 0; |
| } |
| |
| /********************************************************************* |
| * Video4Linux |
| *********************************************************************/ |
| |
| static int stv_open (struct inode *inode, struct file *file) |
| { |
| struct video_device *dev = video_devdata(file); |
| struct usb_stv *stv680 = video_get_drvdata(dev); |
| int err = 0; |
| |
| /* we are called with the BKL held */ |
| stv680->user = 1; |
| err = stv_init (stv680); /* main initialization routine for camera */ |
| |
| if (err >= 0) { |
| stv680->fbuf = rvmalloc (stv680->maxframesize * STV680_NUMFRAMES); |
| if (!stv680->fbuf) { |
| PDEBUG (0, "STV(e): Could not rvmalloc frame bufer"); |
| err = -ENOMEM; |
| } |
| file->private_data = dev; |
| } |
| if (err) |
| stv680->user = 0; |
| |
| return err; |
| } |
| |
| static int stv_close (struct inode *inode, struct file *file) |
| { |
| struct video_device *dev = file->private_data; |
| struct usb_stv *stv680 = video_get_drvdata(dev); |
| int i; |
| |
| for (i = 0; i < STV680_NUMFRAMES; i++) |
| stv680->frame[i].grabstate = FRAME_UNUSED; |
| if (stv680->streaming) |
| stv680_stop_stream (stv680); |
| |
| if ((i = stv_stop_video (stv680)) < 0) |
| PDEBUG (1, "STV(e): stop_video failed in stv_close"); |
| |
| rvfree (stv680->fbuf, stv680->maxframesize * STV680_NUMFRAMES); |
| stv680->user = 0; |
| |
| if (stv680->removed) { |
| kfree(stv680); |
| stv680 = NULL; |
| PDEBUG (0, "STV(i): device unregistered"); |
| } |
| file->private_data = NULL; |
| return 0; |
| } |
| |
| static int stv680_do_ioctl (struct inode *inode, struct file *file, |
| unsigned int cmd, void *arg) |
| { |
| struct video_device *vdev = file->private_data; |
| struct usb_stv *stv680 = video_get_drvdata(vdev); |
| |
| if (!stv680->udev) |
| return -EIO; |
| |
| switch (cmd) { |
| case VIDIOCGCAP:{ |
| struct video_capability *b = arg; |
| |
| strcpy (b->name, stv680->camera_name); |
| b->type = VID_TYPE_CAPTURE; |
| b->channels = 1; |
| b->audios = 0; |
| b->maxwidth = stv680->maxwidth; |
| b->maxheight = stv680->maxheight; |
| b->minwidth = stv680->maxwidth / 2; |
| b->minheight = stv680->maxheight / 2; |
| return 0; |
| } |
| case VIDIOCGCHAN:{ |
| struct video_channel *v = arg; |
| |
| if (v->channel != 0) |
| return -EINVAL; |
| v->flags = 0; |
| v->tuners = 0; |
| v->type = VIDEO_TYPE_CAMERA; |
| strcpy (v->name, "STV Camera"); |
| return 0; |
| } |
| case VIDIOCSCHAN:{ |
| struct video_channel *v = arg; |
| if (v->channel != 0) |
| return -EINVAL; |
| return 0; |
| } |
| case VIDIOCGPICT:{ |
| struct video_picture *p = arg; |
| |
| stv680_get_pict (stv680, p); |
| return 0; |
| } |
| case VIDIOCSPICT:{ |
| struct video_picture *p = arg; |
| |
| if (stv680_set_pict (stv680, p)) |
| return -EINVAL; |
| return 0; |
| } |
| case VIDIOCSWIN:{ |
| struct video_window *vw = arg; |
| |
| if (vw->flags) |
| return -EINVAL; |
| if (vw->clipcount) |
| return -EINVAL; |
| if (vw->width != stv680->vwidth) { |
| if (stv680_set_size (stv680, vw->width, vw->height)) { |
| PDEBUG (2, "STV(e): failed (from user) set size in VIDIOCSWIN"); |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| case VIDIOCGWIN:{ |
| struct video_window *vw = arg; |
| |
| vw->x = 0; /* FIXME */ |
| vw->y = 0; |
| vw->chromakey = 0; |
| vw->flags = 0; |
| vw->clipcount = 0; |
| vw->width = stv680->vwidth; |
| vw->height = stv680->vheight; |
| return 0; |
| } |
| case VIDIOCGMBUF:{ |
| struct video_mbuf *vm = arg; |
| int i; |
| |
| memset (vm, 0, sizeof (*vm)); |
| vm->size = STV680_NUMFRAMES * stv680->maxframesize; |
| vm->frames = STV680_NUMFRAMES; |
| for (i = 0; i < STV680_NUMFRAMES; i++) |
| vm->offsets[i] = stv680->maxframesize * i; |
| return 0; |
| } |
| case VIDIOCMCAPTURE:{ |
| struct video_mmap *vm = arg; |
| |
| if (vm->format != STV_VIDEO_PALETTE) { |
| PDEBUG (2, "STV(i): VIDIOCMCAPTURE vm.format (%i) != VIDEO_PALETTE (%i)", |
| vm->format, STV_VIDEO_PALETTE); |
| if ((vm->format == 3) && (swapRGB_on == 0)) { |
| PDEBUG (2, "STV(i): VIDIOCMCAPTURE swapRGB is (auto) ON"); |
| /* this may fix those apps (e.g., xawtv) that want BGR */ |
| swapRGB = 1; |
| } |
| return -EINVAL; |
| } |
| if (vm->frame >= STV680_NUMFRAMES) { |
| PDEBUG (2, "STV(e): VIDIOCMCAPTURE vm.frame > NUMFRAMES"); |
| return -EINVAL; |
| } |
| if ((stv680->frame[vm->frame].grabstate == FRAME_ERROR) |
| || (stv680->frame[vm->frame].grabstate == FRAME_GRABBING)) { |
| PDEBUG (2, "STV(e): VIDIOCMCAPTURE grabstate (%i) error", |
| stv680->frame[vm->frame].grabstate); |
| return -EBUSY; |
| } |
| /* Is this according to the v4l spec??? */ |
| if (stv680->vwidth != vm->width) { |
| if (stv680_set_size (stv680, vm->width, vm->height)) { |
| PDEBUG (2, "STV(e): VIDIOCMCAPTURE set_size failed"); |
| return -EINVAL; |
| } |
| } |
| stv680->frame[vm->frame].grabstate = FRAME_READY; |
| |
| if (!stv680->streaming) |
| stv680_start_stream (stv680); |
| |
| return 0; |
| } |
| case VIDIOCSYNC:{ |
| int *frame = arg; |
| int ret = 0; |
| |
| if (*frame < 0 || *frame >= STV680_NUMFRAMES) { |
| PDEBUG (2, "STV(e): Bad frame # in VIDIOCSYNC"); |
| return -EINVAL; |
| } |
| ret = stv680_newframe (stv680, *frame); |
| stv680->frame[*frame].grabstate = FRAME_UNUSED; |
| return ret; |
| } |
| case VIDIOCGFBUF:{ |
| struct video_buffer *vb = arg; |
| |
| memset (vb, 0, sizeof (*vb)); |
| return 0; |
| } |
| case VIDIOCKEY: |
| return 0; |
| case VIDIOCCAPTURE: |
| { |
| PDEBUG (2, "STV(e): VIDIOCCAPTURE failed"); |
| return -EINVAL; |
| } |
| case VIDIOCSFBUF: |
| case VIDIOCGTUNER: |
| case VIDIOCSTUNER: |
| case VIDIOCGFREQ: |
| case VIDIOCSFREQ: |
| case VIDIOCGAUDIO: |
| case VIDIOCSAUDIO: |
| return -EINVAL; |
| default: |
| return -ENOIOCTLCMD; |
| } /* end switch */ |
| |
| return 0; |
| } |
| |
| static int stv680_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| return video_usercopy(inode, file, cmd, arg, stv680_do_ioctl); |
| } |
| |
| static int stv680_mmap (struct file *file, struct vm_area_struct *vma) |
| { |
| struct video_device *dev = file->private_data; |
| struct usb_stv *stv680 = video_get_drvdata(dev); |
| unsigned long start = vma->vm_start; |
| unsigned long size = vma->vm_end-vma->vm_start; |
| unsigned long page, pos; |
| |
| mutex_lock(&stv680->lock); |
| |
| if (stv680->udev == NULL) { |
| mutex_unlock(&stv680->lock); |
| return -EIO; |
| } |
| if (size > (((STV680_NUMFRAMES * stv680->maxframesize) + PAGE_SIZE - 1) |
| & ~(PAGE_SIZE - 1))) { |
| mutex_unlock(&stv680->lock); |
| return -EINVAL; |
| } |
| pos = (unsigned long) stv680->fbuf; |
| while (size > 0) { |
| page = vmalloc_to_pfn((void *)pos); |
| if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) { |
| mutex_unlock(&stv680->lock); |
| return -EAGAIN; |
| } |
| start += PAGE_SIZE; |
| pos += PAGE_SIZE; |
| if (size > PAGE_SIZE) |
| size -= PAGE_SIZE; |
| else |
| size = 0; |
| } |
| mutex_unlock(&stv680->lock); |
| |
| return 0; |
| } |
| |
| static ssize_t stv680_read (struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct video_device *dev = file->private_data; |
| unsigned long int realcount = count; |
| int ret = 0; |
| struct usb_stv *stv680 = video_get_drvdata(dev); |
| unsigned long int i; |
| |
| if (STV680_NUMFRAMES != 2) { |
| PDEBUG (0, "STV(e): STV680_NUMFRAMES needs to be 2!"); |
| return -1; |
| } |
| if (stv680->udev == NULL) |
| return -EIO; |
| if (realcount > (stv680->vwidth * stv680->vheight * 3)) |
| realcount = stv680->vwidth * stv680->vheight * 3; |
| |
| /* Shouldn't happen: */ |
| if (stv680->frame[0].grabstate == FRAME_GRABBING) { |
| PDEBUG (2, "STV(e): FRAME_GRABBING in stv680_read"); |
| return -EBUSY; |
| } |
| stv680->frame[0].grabstate = FRAME_READY; |
| stv680->frame[1].grabstate = FRAME_UNUSED; |
| stv680->curframe = 0; |
| |
| if (!stv680->streaming) |
| stv680_start_stream (stv680); |
| |
| if (!stv680->streaming) { |
| ret = stv680_newframe (stv680, 0); /* ret should = 0 */ |
| } |
| |
| ret = stv680_newframe (stv680, 0); |
| |
| if (!ret) { |
| if ((i = copy_to_user (buf, stv680->frame[0].data, realcount)) != 0) { |
| PDEBUG (2, "STV(e): copy_to_user frame 0 failed, ret count = %li", i); |
| return -EFAULT; |
| } |
| } else { |
| realcount = ret; |
| } |
| stv680->frame[0].grabstate = FRAME_UNUSED; |
| return realcount; |
| } /* stv680_read */ |
| |
| static struct file_operations stv680_fops = { |
| .owner = THIS_MODULE, |
| .open = stv_open, |
| .release = stv_close, |
| .read = stv680_read, |
| .mmap = stv680_mmap, |
| .ioctl = stv680_ioctl, |
| .compat_ioctl = v4l_compat_ioctl32, |
| .llseek = no_llseek, |
| }; |
| static struct video_device stv680_template = { |
| .owner = THIS_MODULE, |
| .name = "STV0680 USB camera", |
| .type = VID_TYPE_CAPTURE, |
| .hardware = VID_HARDWARE_SE401, |
| .fops = &stv680_fops, |
| .release = video_device_release, |
| .minor = -1, |
| }; |
| |
| static int stv680_probe (struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| struct usb_device *dev = interface_to_usbdev(intf); |
| struct usb_host_interface *interface; |
| struct usb_stv *stv680 = NULL; |
| char *camera_name = NULL; |
| int retval = 0; |
| |
| /* We don't handle multi-config cameras */ |
| if (dev->descriptor.bNumConfigurations != 1) { |
| PDEBUG (0, "STV(e): Number of Configurations != 1"); |
| return -ENODEV; |
| } |
| |
| interface = &intf->altsetting[0]; |
| /* Is it a STV680? */ |
| if ((le16_to_cpu(dev->descriptor.idVendor) == USB_PENCAM_VENDOR_ID) && |
| (le16_to_cpu(dev->descriptor.idProduct) == USB_PENCAM_PRODUCT_ID)) { |
| camera_name = "STV0680"; |
| PDEBUG (0, "STV(i): STV0680 camera found."); |
| } else if ((le16_to_cpu(dev->descriptor.idVendor) == USB_CREATIVEGOMINI_VENDOR_ID) && |
| (le16_to_cpu(dev->descriptor.idProduct) == USB_CREATIVEGOMINI_PRODUCT_ID)) { |
| camera_name = "Creative WebCam Go Mini"; |
| PDEBUG (0, "STV(i): Creative WebCam Go Mini found."); |
| } else { |
| PDEBUG (0, "STV(e): Vendor/Product ID do not match STV0680 or Creative WebCam Go Mini values."); |
| PDEBUG (0, "STV(e): Check that the STV0680 or Creative WebCam Go Mini camera is connected to the computer."); |
| retval = -ENODEV; |
| goto error; |
| } |
| /* We found one */ |
| if ((stv680 = kzalloc (sizeof (*stv680), GFP_KERNEL)) == NULL) { |
| PDEBUG (0, "STV(e): couldn't kmalloc stv680 struct."); |
| retval = -ENOMEM; |
| goto error; |
| } |
| |
| stv680->udev = dev; |
| stv680->camera_name = camera_name; |
| |
| stv680->vdev = video_device_alloc(); |
| if (!stv680->vdev) { |
| retval = -ENOMEM; |
| goto error; |
| } |
| memcpy(stv680->vdev, &stv680_template, sizeof(stv680_template)); |
| stv680->vdev->dev = &intf->dev; |
| video_set_drvdata(stv680->vdev, stv680); |
| |
| memcpy (stv680->vdev->name, stv680->camera_name, strlen (stv680->camera_name)); |
| init_waitqueue_head (&stv680->wq); |
| mutex_init (&stv680->lock); |
| wmb (); |
| |
| if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { |
| PDEBUG (0, "STV(e): video_register_device failed"); |
| retval = -EIO; |
| goto error_vdev; |
| } |
| PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor); |
| |
| usb_set_intfdata (intf, stv680); |
| stv680_create_sysfs_files(stv680->vdev); |
| return 0; |
| |
| error_vdev: |
| video_device_release(stv680->vdev); |
| error: |
| kfree(stv680); |
| return retval; |
| } |
| |
| static inline void usb_stv680_remove_disconnected (struct usb_stv *stv680) |
| { |
| int i; |
| |
| stv680->udev = NULL; |
| stv680->frame[0].grabstate = FRAME_ERROR; |
| stv680->frame[1].grabstate = FRAME_ERROR; |
| stv680->streaming = 0; |
| |
| wake_up_interruptible (&stv680->wq); |
| |
| for (i = 0; i < STV680_NUMSBUF; i++) |
| if (stv680->urb[i]) { |
| usb_kill_urb (stv680->urb[i]); |
| usb_free_urb (stv680->urb[i]); |
| stv680->urb[i] = NULL; |
| kfree(stv680->sbuf[i].data); |
| } |
| for (i = 0; i < STV680_NUMSCRATCH; i++) |
| kfree(stv680->scratch[i].data); |
| PDEBUG (0, "STV(i): %s disconnected", stv680->camera_name); |
| |
| /* Free the memory */ |
| kfree(stv680); |
| } |
| |
| static void stv680_disconnect (struct usb_interface *intf) |
| { |
| struct usb_stv *stv680 = usb_get_intfdata (intf); |
| |
| usb_set_intfdata (intf, NULL); |
| |
| if (stv680) { |
| /* We don't want people trying to open up the device */ |
| if (stv680->vdev) { |
| stv680_remove_sysfs_files(stv680->vdev); |
| video_unregister_device(stv680->vdev); |
| stv680->vdev = NULL; |
| } |
| if (!stv680->user) { |
| usb_stv680_remove_disconnected (stv680); |
| } else { |
| stv680->removed = 1; |
| } |
| } |
| } |
| |
| static struct usb_driver stv680_driver = { |
| .name = "stv680", |
| .probe = stv680_probe, |
| .disconnect = stv680_disconnect, |
| .id_table = device_table |
| }; |
| |
| /******************************************************************** |
| * Module routines |
| ********************************************************************/ |
| |
| static int __init usb_stv680_init (void) |
| { |
| if (usb_register (&stv680_driver) < 0) { |
| PDEBUG (0, "STV(e): Could not setup STV0680 driver"); |
| return -1; |
| } |
| PDEBUG (0, "STV(i): usb camera driver version %s registering", DRIVER_VERSION); |
| |
| info(DRIVER_DESC " " DRIVER_VERSION); |
| return 0; |
| } |
| |
| static void __exit usb_stv680_exit (void) |
| { |
| usb_deregister (&stv680_driver); |
| PDEBUG (0, "STV(i): driver deregistered"); |
| } |
| |
| module_init (usb_stv680_init); |
| module_exit (usb_stv680_exit); |