Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 6fb5511ab96d9f31be747bab842f96227a5c7aec / . / drivers / net / wireless / iwlwifi / iwl-agn.c
blob: 50cee2b5a6b7b61251c2a49d93825561709d6e07 [file] [log] [blame]
/******************************************************************************
*
* Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <net/mac80211.h>
#include <asm/div64.h>
#define DRV_NAME "iwlagn"
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-helpers.h"
#include "iwl-sta.h"
#include "iwl-agn-calib.h"
#include "iwl-agn.h"
/******************************************************************************
*
* module boiler plate
*
******************************************************************************/
/*
* module name, copyright, version, etc.
*/
#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
#ifdef CONFIG_IWLWIFI_DEBUG
#define VD "d"
#else
#define VD
#endif
#define DRV_VERSION IWLWIFI_VERSION VD
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_ALIAS("iwl4965");
static int iwlagn_ant_coupling;
static bool iwlagn_bt_ch_announce = 1;
void iwl_update_chain_flags(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx;
if (priv->cfg->ops->hcmd->set_rxon_chain) {
for_each_context(priv, ctx) {
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
if (ctx->active.rx_chain != ctx->staging.rx_chain)
iwlcore_commit_rxon(priv, ctx);
}
}
}
static void iwl_clear_free_frames(struct iwl_priv *priv)
{
struct list_head *element;
IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
priv->frames_count);
while (!list_empty(&priv->free_frames)) {
element = priv->free_frames.next;
list_del(element);
kfree(list_entry(element, struct iwl_frame, list));
priv->frames_count--;
}
if (priv->frames_count) {
IWL_WARN(priv, "%d frames still in use. Did we lose one?\n",
priv->frames_count);
priv->frames_count = 0;
}
}
static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
{
struct iwl_frame *frame;
struct list_head *element;
if (list_empty(&priv->free_frames)) {
frame = kzalloc(sizeof(*frame), GFP_KERNEL);
if (!frame) {
IWL_ERR(priv, "Could not allocate frame!\n");
return NULL;
}
priv->frames_count++;
return frame;
}
element = priv->free_frames.next;
list_del(element);
return list_entry(element, struct iwl_frame, list);
}
static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
{
memset(frame, 0, sizeof(*frame));
list_add(&frame->list, &priv->free_frames);
}
static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
struct ieee80211_hdr *hdr,
int left)
{
lockdep_assert_held(&priv->mutex);
if (!priv->beacon_skb)
return 0;
if (priv->beacon_skb->len > left)
return 0;
memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len);
return priv->beacon_skb->len;
}
/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
static void iwl_set_beacon_tim(struct iwl_priv *priv,
struct iwl_tx_beacon_cmd *tx_beacon_cmd,
u8 *beacon, u32 frame_size)
{
u16 tim_idx;
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
/*
* The index is relative to frame start but we start looking at the
* variable-length part of the beacon.
*/
tim_idx = mgmt->u.beacon.variable - beacon;
/* Parse variable-length elements of beacon to find WLAN_EID_TIM */
while ((tim_idx < (frame_size - 2)) &&
(beacon[tim_idx] != WLAN_EID_TIM))
tim_idx += beacon[tim_idx+1] + 2;
/* If TIM field was found, set variables */
if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
tx_beacon_cmd->tim_size = beacon[tim_idx+1];
} else
IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
}
static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
struct iwl_frame *frame)
{
struct iwl_tx_beacon_cmd *tx_beacon_cmd;
u32 frame_size;
u32 rate_flags;
u32 rate;
/*
* We have to set up the TX command, the TX Beacon command, and the
* beacon contents.
*/
lockdep_assert_held(&priv->mutex);
if (!priv->beacon_ctx) {
IWL_ERR(priv, "trying to build beacon w/o beacon context!\n");
return 0;
}
/* Initialize memory */
tx_beacon_cmd = &frame->u.beacon;
memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
/* Set up TX beacon contents */
frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
sizeof(frame->u) - sizeof(*tx_beacon_cmd));
if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
return 0;
if (!frame_size)
return 0;
/* Set up TX command fields */
tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id;
tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
/* Set up TX beacon command fields */
iwl_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
frame_size);
/* Set up packet rate and flags */
rate = iwl_rate_get_lowest_plcp(priv, priv->beacon_ctx);
priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
priv->hw_params.valid_tx_ant);
rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE))
rate_flags |= RATE_MCS_CCK_MSK;
tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
rate_flags);
return sizeof(*tx_beacon_cmd) + frame_size;
}
int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
{
struct iwl_frame *frame;
unsigned int frame_size;
int rc;
frame = iwl_get_free_frame(priv);
if (!frame) {
IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
"command.\n");
return -ENOMEM;
}
frame_size = iwl_hw_get_beacon_cmd(priv, frame);
if (!frame_size) {
IWL_ERR(priv, "Error configuring the beacon command\n");
iwl_free_frame(priv, frame);
return -EINVAL;
}
rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
&frame->u.cmd[0]);
iwl_free_frame(priv, frame);
return rc;
}
static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
{
struct iwl_tfd_tb *tb = &tfd->tbs[idx];
dma_addr_t addr = get_unaligned_le32(&tb->lo);
if (sizeof(dma_addr_t) > sizeof(u32))
addr |=
((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16;
return addr;
}
static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx)
{
struct iwl_tfd_tb *tb = &tfd->tbs[idx];
return le16_to_cpu(tb->hi_n_len) >> 4;
}
static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx,
dma_addr_t addr, u16 len)
{
struct iwl_tfd_tb *tb = &tfd->tbs[idx];
u16 hi_n_len = len << 4;
put_unaligned_le32(addr, &tb->lo);
if (sizeof(dma_addr_t) > sizeof(u32))
hi_n_len |= ((addr >> 16) >> 16) & 0xF;
tb->hi_n_len = cpu_to_le16(hi_n_len);
tfd->num_tbs = idx + 1;
}
static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd)
{
return tfd->num_tbs & 0x1f;
}
/**
* iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
* @priv - driver private data
* @txq - tx queue
*
* Does NOT advance any TFD circular buffer read/write indexes
* Does NOT free the TFD itself (which is within circular buffer)
*/
void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
{
struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds;
struct iwl_tfd *tfd;
struct pci_dev *dev = priv->pci_dev;
int index = txq->q.read_ptr;
int i;
int num_tbs;
tfd = &tfd_tmp[index];
/* Sanity check on number of chunks */
num_tbs = iwl_tfd_get_num_tbs(tfd);
if (num_tbs >= IWL_NUM_OF_TBS) {
IWL_ERR(priv, "Too many chunks: %i\n", num_tbs);
/* @todo issue fatal error, it is quite serious situation */
return;
}
/* Unmap tx_cmd */
if (num_tbs)
pci_unmap_single(dev,
dma_unmap_addr(&txq->meta[index], mapping),
dma_unmap_len(&txq->meta[index], len),
PCI_DMA_BIDIRECTIONAL);
/* Unmap chunks, if any. */
for (i = 1; i < num_tbs; i++)
pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i),
iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE);
/* free SKB */
if (txq->txb) {
struct sk_buff *skb;
skb = txq->txb[txq->q.read_ptr].skb;
/* can be called from irqs-disabled context */
if (skb) {
dev_kfree_skb_any(skb);
txq->txb[txq->q.read_ptr].skb = NULL;
}
}
}
int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
dma_addr_t addr, u16 len,
u8 reset, u8 pad)
{
struct iwl_queue *q;
struct iwl_tfd *tfd, *tfd_tmp;
u32 num_tbs;
q = &txq->q;
tfd_tmp = (struct iwl_tfd *)txq->tfds;
tfd = &tfd_tmp[q->write_ptr];
if (reset)
memset(tfd, 0, sizeof(*tfd));
num_tbs = iwl_tfd_get_num_tbs(tfd);
/* Each TFD can point to a maximum 20 Tx buffers */
if (num_tbs >= IWL_NUM_OF_TBS) {
IWL_ERR(priv, "Error can not send more than %d chunks\n",
IWL_NUM_OF_TBS);
return -EINVAL;
}
BUG_ON(addr & ~DMA_BIT_MASK(36));
if (unlikely(addr & ~IWL_TX_DMA_MASK))
IWL_ERR(priv, "Unaligned address = %llx\n",
(unsigned long long)addr);
iwl_tfd_set_tb(tfd, num_tbs, addr, len);
return 0;
}
/*
* Tell nic where to find circular buffer of Tx Frame Descriptors for
* given Tx queue, and enable the DMA channel used for that queue.
*
* 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
* channels supported in hardware.
*/
int iwl_hw_tx_queue_init(struct iwl_priv *priv,
struct iwl_tx_queue *txq)
{
int txq_id = txq->q.id;
/* Circular buffer (TFD queue in DRAM) physical base address */
iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
txq->q.dma_addr >> 8);
return 0;
}
/******************************************************************************
*
* Generic RX handler implementations
*
******************************************************************************/
static void iwl_rx_reply_alive(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl_alive_resp *palive;
struct delayed_work *pwork;
palive = &pkt->u.alive_frame;
IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
"0x%01X 0x%01X\n",
palive->is_valid, palive->ver_type,
palive->ver_subtype);
if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
memcpy(&priv->card_alive_init,
&pkt->u.alive_frame,
sizeof(struct iwl_init_alive_resp));
pwork = &priv->init_alive_start;
} else {
IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
memcpy(&priv->card_alive, &pkt->u.alive_frame,
sizeof(struct iwl_alive_resp));
pwork = &priv->alive_start;
}
/* We delay the ALIVE response by 5ms to
* give the HW RF Kill time to activate... */
if (palive->is_valid == UCODE_VALID_OK)
queue_delayed_work(priv->workqueue, pwork,
msecs_to_jiffies(5));
else
IWL_WARN(priv, "uCode did not respond OK.\n");
}
static void iwl_bg_beacon_update(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, beacon_update);
struct sk_buff *beacon;
mutex_lock(&priv->mutex);
if (!priv->beacon_ctx) {
IWL_ERR(priv, "updating beacon w/o beacon context!\n");
goto out;
}
if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) {
/*
* The ucode will send beacon notifications even in
* IBSS mode, but we don't want to process them. But
* we need to defer the type check to here due to
* requiring locking around the beacon_ctx access.
*/
goto out;
}
/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif);
if (!beacon) {
IWL_ERR(priv, "update beacon failed -- keeping old\n");
goto out;
}
/* new beacon skb is allocated every time; dispose previous.*/
dev_kfree_skb(priv->beacon_skb);
priv->beacon_skb = beacon;
iwlagn_send_beacon_cmd(priv);
out:
mutex_unlock(&priv->mutex);
}
static void iwl_bg_bt_runtime_config(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, bt_runtime_config);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* dont send host command if rf-kill is on */
if (!iwl_is_ready_rf(priv))
return;
priv->cfg->ops->hcmd->send_bt_config(priv);
}
static void iwl_bg_bt_full_concurrency(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, bt_full_concurrency);
struct iwl_rxon_context *ctx;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* dont send host command if rf-kill is on */
if (!iwl_is_ready_rf(priv))
return;
IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
priv->bt_full_concurrent ?
"full concurrency" : "3-wire");
/*
* LQ & RXON updated cmds must be sent before BT Config cmd
* to avoid 3-wire collisions
*/
mutex_lock(&priv->mutex);
for_each_context(priv, ctx) {
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
iwlcore_commit_rxon(priv, ctx);
}
mutex_unlock(&priv->mutex);
priv->cfg->ops->hcmd->send_bt_config(priv);
}
/**
* iwl_bg_statistics_periodic - Timer callback to queue statistics
*
* This callback is provided in order to send a statistics request.
*
* This timer function is continually reset to execute within
* REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
* was received. We need to ensure we receive the statistics in order
* to update the temperature used for calibrating the TXPOWER.
*/
static void iwl_bg_statistics_periodic(unsigned long data)
{
struct iwl_priv *priv = (struct iwl_priv *)data;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* dont send host command if rf-kill is on */
if (!iwl_is_ready_rf(priv))
return;
iwl_send_statistics_request(priv, CMD_ASYNC, false);
}
static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
u32 start_idx, u32 num_events,
u32 mode)
{
u32 i;
u32 ptr; /* SRAM byte address of log data */
u32 ev, time, data; /* event log data */
unsigned long reg_flags;
if (mode == 0)
ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
else
ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
/* Make sure device is powered up for SRAM reads */
spin_lock_irqsave(&priv->reg_lock, reg_flags);
if (iwl_grab_nic_access(priv)) {
spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
return;
}
/* Set starting address; reads will auto-increment */
_iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
rmb();
/*
* "time" is actually "data" for mode 0 (no timestamp).
* place event id # at far right for easier visual parsing.
*/
for (i = 0; i < num_events; i++) {
ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
if (mode == 0) {
trace_iwlwifi_dev_ucode_cont_event(priv,
0, time, ev);
} else {
data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
trace_iwlwifi_dev_ucode_cont_event(priv,
time, data, ev);
}
}
/* Allow device to power down */
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
}
static void iwl_continuous_event_trace(struct iwl_priv *priv)
{
u32 capacity; /* event log capacity in # entries */
u32 base; /* SRAM byte address of event log header */
u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
u32 num_wraps; /* # times uCode wrapped to top of log */
u32 next_entry; /* index of next entry to be written by uCode */
if (priv->ucode_type == UCODE_INIT)
base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
else
base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
capacity = iwl_read_targ_mem(priv, base);
num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
} else
return;
if (num_wraps == priv->event_log.num_wraps) {
iwl_print_cont_event_trace(priv,
base, priv->event_log.next_entry,
next_entry - priv->event_log.next_entry,
mode);
priv->event_log.non_wraps_count++;
} else {
if ((num_wraps - priv->event_log.num_wraps) > 1)
priv->event_log.wraps_more_count++;
else
priv->event_log.wraps_once_count++;
trace_iwlwifi_dev_ucode_wrap_event(priv,
num_wraps - priv->event_log.num_wraps,
next_entry, priv->event_log.next_entry);
if (next_entry < priv->event_log.next_entry) {
iwl_print_cont_event_trace(priv, base,
priv->event_log.next_entry,
capacity - priv->event_log.next_entry,
mode);
iwl_print_cont_event_trace(priv, base, 0,
next_entry, mode);
} else {
iwl_print_cont_event_trace(priv, base,
next_entry, capacity - next_entry,
mode);
iwl_print_cont_event_trace(priv, base, 0,
next_entry, mode);
}
}
priv->event_log.num_wraps = num_wraps;
priv->event_log.next_entry = next_entry;
}
/**
* iwl_bg_ucode_trace - Timer callback to log ucode event
*
* The timer is continually set to execute every
* UCODE_TRACE_PERIOD milliseconds after the last timer expired
* this function is to perform continuous uCode event logging operation
* if enabled
*/
static void iwl_bg_ucode_trace(unsigned long data)
{
struct iwl_priv *priv = (struct iwl_priv *)data;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (priv->event_log.ucode_trace) {
iwl_continuous_event_trace(priv);
/* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
mod_timer(&priv->ucode_trace,
jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
}
}
static void iwl_rx_beacon_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl4965_beacon_notif *beacon =
(struct iwl4965_beacon_notif *)pkt->u.raw;
#ifdef CONFIG_IWLWIFI_DEBUG
u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
"tsf %d %d rate %d\n",
le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
beacon->beacon_notify_hdr.failure_frame,
le32_to_cpu(beacon->ibss_mgr_status),
le32_to_cpu(beacon->high_tsf),
le32_to_cpu(beacon->low_tsf), rate);
#endif
priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
queue_work(priv->workqueue, &priv->beacon_update);
}
/* Handle notification from uCode that card's power state is changing
* due to software, hardware, or critical temperature RFKILL */
static void iwl_rx_card_state_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
unsigned long status = priv->status;
IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
(flags & HW_CARD_DISABLED) ? "Kill" : "On",
(flags & SW_CARD_DISABLED) ? "Kill" : "On",
(flags & CT_CARD_DISABLED) ?
"Reached" : "Not reached");
if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
CT_CARD_DISABLED)) {
iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
iwl_write_direct32(priv, HBUS_TARG_MBX_C,
HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
if (!(flags & RXON_CARD_DISABLED)) {
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
iwl_write_direct32(priv, HBUS_TARG_MBX_C,
HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
}
if (flags & CT_CARD_DISABLED)
iwl_tt_enter_ct_kill(priv);
}
if (!(flags & CT_CARD_DISABLED))
iwl_tt_exit_ct_kill(priv);
if (flags & HW_CARD_DISABLED)
set_bit(STATUS_RF_KILL_HW, &priv->status);
else
clear_bit(STATUS_RF_KILL_HW, &priv->status);
if (!(flags & RXON_CARD_DISABLED))
iwl_scan_cancel(priv);
if ((test_bit(STATUS_RF_KILL_HW, &status) !=
test_bit(STATUS_RF_KILL_HW, &priv->status)))
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->status));
else
wake_up_interruptible(&priv->wait_command_queue);
}
static void iwl_bg_tx_flush(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, tx_flush);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* do nothing if rf-kill is on */
if (!iwl_is_ready_rf(priv))
return;
if (priv->cfg->ops->lib->txfifo_flush) {
IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
}
}
/**
* iwl_setup_rx_handlers - Initialize Rx handler callbacks
*
* Setup the RX handlers for each of the reply types sent from the uCode
* to the host.
*
* This function chains into the hardware specific files for them to setup
* any hardware specific handlers as well.
*/
static void iwl_setup_rx_handlers(struct iwl_priv *priv)
{
priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
iwl_rx_spectrum_measure_notif;
priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
iwl_rx_pm_debug_statistics_notif;
priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif;
/*
* The same handler is used for both the REPLY to a discrete
* statistics request from the host as well as for the periodic
* statistics notifications (after received beacons) from the uCode.
*/
priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
iwl_setup_rx_scan_handlers(priv);
/* status change handler */
priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif;
priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
iwl_rx_missed_beacon_notif;
/* Rx handlers */
priv->rx_handlers[REPLY_RX_PHY_CMD] = iwlagn_rx_reply_rx_phy;
priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwlagn_rx_reply_rx;
/* block ack */
priv->rx_handlers[REPLY_COMPRESSED_BA] = iwlagn_rx_reply_compressed_ba;
/* Set up hardware specific Rx handlers */
priv->cfg->ops->lib->rx_handler_setup(priv);
}
/**
* iwl_rx_handle - Main entry function for receiving responses from uCode
*
* Uses the priv->rx_handlers callback function array to invoke
* the appropriate handlers, including command responses,
* frame-received notifications, and other notifications.
*/
void iwl_rx_handle(struct iwl_priv *priv)
{
struct iwl_rx_mem_buffer *rxb;
struct iwl_rx_packet *pkt;
struct iwl_rx_queue *rxq = &priv->rxq;
u32 r, i;
int reclaim;
unsigned long flags;
u8 fill_rx = 0;
u32 count = 8;
int total_empty;
/* uCode's read index (stored in shared DRAM) indicates the last Rx
* buffer that the driver may process (last buffer filled by ucode). */
r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
i = rxq->read;
/* Rx interrupt, but nothing sent from uCode */
if (i == r)
IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
/* calculate total frames need to be restock after handling RX */
total_empty = r - rxq->write_actual;
if (total_empty < 0)
total_empty += RX_QUEUE_SIZE;
if (total_empty > (RX_QUEUE_SIZE / 2))
fill_rx = 1;
while (i != r) {
int len;
rxb = rxq->queue[i];
/* If an RXB doesn't have a Rx queue slot associated with it,
* then a bug has been introduced in the queue refilling
* routines -- catch it here */
BUG_ON(rxb == NULL);
rxq->queue[i] = NULL;
pci_unmap_page(priv->pci_dev, rxb->page_dma,
PAGE_SIZE << priv->hw_params.rx_page_order,
PCI_DMA_FROMDEVICE);
pkt = rxb_addr(rxb);
len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
len += sizeof(u32); /* account for status word */
trace_iwlwifi_dev_rx(priv, pkt, len);
/* Reclaim a command buffer only if this packet is a response
* to a (driver-originated) command.
* If the packet (e.g. Rx frame) originated from uCode,
* there is no command buffer to reclaim.
* Ucode should set SEQ_RX_FRAME bit if ucode-originated,
* but apparently a few don't get set; catch them here. */
reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
(pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
(pkt->hdr.cmd != REPLY_RX) &&
(pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
(pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
(pkt->hdr.cmd != REPLY_TX);
/* Based on type of command response or notification,
* handle those that need handling via function in
* rx_handlers table. See iwl_setup_rx_handlers() */
if (priv->rx_handlers[pkt->hdr.cmd]) {
IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
} else {
/* No handling needed */
IWL_DEBUG_RX(priv,
"r %d i %d No handler needed for %s, 0x%02x\n",
r, i, get_cmd_string(pkt->hdr.cmd),
pkt->hdr.cmd);
}
/*
* XXX: After here, we should always check rxb->page
* against NULL before touching it or its virtual
* memory (pkt). Because some rx_handler might have
* already taken or freed the pages.
*/
if (reclaim) {
/* Invoke any callbacks, transfer the buffer to caller,
* and fire off the (possibly) blocking iwl_send_cmd()
* as we reclaim the driver command queue */
if (rxb->page)
iwl_tx_cmd_complete(priv, rxb);
else
IWL_WARN(priv, "Claim null rxb?\n");
}
/* Reuse the page if possible. For notification packets and
* SKBs that fail to Rx correctly, add them back into the
* rx_free list for reuse later. */
spin_lock_irqsave(&rxq->lock, flags);
if (rxb->page != NULL) {
rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
0, PAGE_SIZE << priv->hw_params.rx_page_order,
PCI_DMA_FROMDEVICE);
list_add_tail(&rxb->list, &rxq->rx_free);
rxq->free_count++;
} else
list_add_tail(&rxb->list, &rxq->rx_used);
spin_unlock_irqrestore(&rxq->lock, flags);
i = (i + 1) & RX_QUEUE_MASK;
/* If there are a lot of unused frames,
* restock the Rx queue so ucode wont assert. */
if (fill_rx) {
count++;
if (count >= 8) {
rxq->read = i;
iwlagn_rx_replenish_now(priv);
count = 0;
}
}
}
/* Backtrack one entry */
rxq->read = i;
if (fill_rx)
iwlagn_rx_replenish_now(priv);
else
iwlagn_rx_queue_restock(priv);
}
/* call this function to flush any scheduled tasklet */
static inline void iwl_synchronize_irq(struct iwl_priv *priv)
{
/* wait to make sure we flush pending tasklet*/
synchronize_irq(priv->pci_dev->irq);
tasklet_kill(&priv->irq_tasklet);
}
static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
{
u32 inta, handled = 0;
u32 inta_fh;
unsigned long flags;
u32 i;
#ifdef CONFIG_IWLWIFI_DEBUG
u32 inta_mask;
#endif
spin_lock_irqsave(&priv->lock, flags);
/* Ack/clear/reset pending uCode interrupts.
* Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
* and will clear only when CSR_FH_INT_STATUS gets cleared. */
inta = iwl_read32(priv, CSR_INT);
iwl_write32(priv, CSR_INT, inta);
/* Ack/clear/reset pending flow-handler (DMA) interrupts.
* Any new interrupts that happen after this, either while we're
* in this tasklet, or later, will show up in next ISR/tasklet. */
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
inta, inta_mask, inta_fh);
}
#endif
spin_unlock_irqrestore(&priv->lock, flags);
/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
* atomic, make sure that inta covers all the interrupts that
* we've discovered, even if FH interrupt came in just after
* reading CSR_INT. */
if (inta_fh & CSR49_FH_INT_RX_MASK)
inta |= CSR_INT_BIT_FH_RX;
if (inta_fh & CSR49_FH_INT_TX_MASK)
inta |= CSR_INT_BIT_FH_TX;
/* Now service all interrupt bits discovered above. */
if (inta & CSR_INT_BIT_HW_ERR) {
IWL_ERR(priv, "Hardware error detected. Restarting.\n");
/* Tell the device to stop sending interrupts */
iwl_disable_interrupts(priv);
priv->isr_stats.hw++;
iwl_irq_handle_error(priv);
handled |= CSR_INT_BIT_HW_ERR;
return;
}
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
"the frame/frames.\n");
priv->isr_stats.sch++;
}
/* Alive notification via Rx interrupt will do the real work */
if (inta & CSR_INT_BIT_ALIVE) {
IWL_DEBUG_ISR(priv, "Alive interrupt\n");
priv->isr_stats.alive++;
}
}
#endif
/* Safely ignore these bits for debug checks below */
inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
/* HW RF KILL switch toggled */
if (inta & CSR_INT_BIT_RF_KILL) {
int hw_rf_kill = 0;
if (!(iwl_read32(priv, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
hw_rf_kill = 1;
IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
hw_rf_kill ? "disable radio" : "enable radio");
priv->isr_stats.rfkill++;
/* driver only loads ucode once setting the interface up.
* the driver allows loading the ucode even if the radio
* is killed. Hence update the killswitch state here. The
* rfkill handler will care about restarting if needed.
*/
if (!test_bit(STATUS_ALIVE, &priv->status)) {
if (hw_rf_kill)
set_bit(STATUS_RF_KILL_HW, &priv->status);
else
clear_bit(STATUS_RF_KILL_HW, &priv->status);
wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
}
handled |= CSR_INT_BIT_RF_KILL;
}
/* Chip got too hot and stopped itself */
if (inta & CSR_INT_BIT_CT_KILL) {
IWL_ERR(priv, "Microcode CT kill error detected.\n");
priv->isr_stats.ctkill++;
handled |= CSR_INT_BIT_CT_KILL;
}
/* Error detected by uCode */
if (inta & CSR_INT_BIT_SW_ERR) {
IWL_ERR(priv, "Microcode SW error detected. "
" Restarting 0x%X.\n", inta);
priv->isr_stats.sw++;
iwl_irq_handle_error(priv);
handled |= CSR_INT_BIT_SW_ERR;
}
/*
* uCode wakes up after power-down sleep.
* Tell device about any new tx or host commands enqueued,
* and about any Rx buffers made available while asleep.
*/
if (inta & CSR_INT_BIT_WAKEUP) {
IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
for (i = 0; i < priv->hw_params.max_txq_num; i++)
iwl_txq_update_write_ptr(priv, &priv->txq[i]);
priv->isr_stats.wakeup++;
handled |= CSR_INT_BIT_WAKEUP;
}
/* All uCode command responses, including Tx command responses,
* Rx "responses" (frame-received notification), and other
* notifications from uCode come through here*/
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
iwl_rx_handle(priv);
priv->isr_stats.rx++;
handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
}
/* This "Tx" DMA channel is used only for loading uCode */
if (inta & CSR_INT_BIT_FH_TX) {
IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
priv->isr_stats.tx++;
handled |= CSR_INT_BIT_FH_TX;
/* Wake up uCode load routine, now that load is complete */
priv->ucode_write_complete = 1;
wake_up_interruptible(&priv->wait_command_queue);
}
if (inta & ~handled) {
IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
priv->isr_stats.unhandled++;
}
if (inta & ~(priv->inta_mask)) {
IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
inta & ~priv->inta_mask);
IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh);
}
/* Re-enable all interrupts */
/* only Re-enable if diabled by irq */
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl_enable_interrupts(priv);
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
inta = iwl_read32(priv, CSR_INT);
inta_mask = iwl_read32(priv, CSR_INT_MASK);
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
}
#endif
}
/* tasklet for iwlagn interrupt */
static void iwl_irq_tasklet(struct iwl_priv *priv)
{
u32 inta = 0;
u32 handled = 0;
unsigned long flags;
u32 i;
#ifdef CONFIG_IWLWIFI_DEBUG
u32 inta_mask;
#endif
spin_lock_irqsave(&priv->lock, flags);
/* Ack/clear/reset pending uCode interrupts.
* Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
*/
/* There is a hardware bug in the interrupt mask function that some
* interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
* they are disabled in the CSR_INT_MASK register. Furthermore the
* ICT interrupt handling mechanism has another bug that might cause
* these unmasked interrupts fail to be detected. We workaround the
* hardware bugs here by ACKing all the possible interrupts so that
* interrupt coalescing can still be achieved.
*/
iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask);
inta = priv->_agn.inta;
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
/* just for debug */
inta_mask = iwl_read32(priv, CSR_INT_MASK);
IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
inta, inta_mask);
}
#endif
spin_unlock_irqrestore(&priv->lock, flags);
/* saved interrupt in inta variable now we can reset priv->_agn.inta */
priv->_agn.inta = 0;
/* Now service all interrupt bits discovered above. */
if (inta & CSR_INT_BIT_HW_ERR) {
IWL_ERR(priv, "Hardware error detected. Restarting.\n");
/* Tell the device to stop sending interrupts */
iwl_disable_interrupts(priv);
priv->isr_stats.hw++;
iwl_irq_handle_error(priv);
handled |= CSR_INT_BIT_HW_ERR;
return;
}
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
"the frame/frames.\n");
priv->isr_stats.sch++;
}
/* Alive notification via Rx interrupt will do the real work */
if (inta & CSR_INT_BIT_ALIVE) {
IWL_DEBUG_ISR(priv, "Alive interrupt\n");
priv->isr_stats.alive++;
}
}
#endif
/* Safely ignore these bits for debug checks below */
inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
/* HW RF KILL switch toggled */
if (inta & CSR_INT_BIT_RF_KILL) {
int hw_rf_kill = 0;
if (!(iwl_read32(priv, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
hw_rf_kill = 1;
IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
hw_rf_kill ? "disable radio" : "enable radio");
priv->isr_stats.rfkill++;
/* driver only loads ucode once setting the interface up.
* the driver allows loading the ucode even if the radio
* is killed. Hence update the killswitch state here. The
* rfkill handler will care about restarting if needed.
*/
if (!test_bit(STATUS_ALIVE, &priv->status)) {
if (hw_rf_kill)
set_bit(STATUS_RF_KILL_HW, &priv->status);
else
clear_bit(STATUS_RF_KILL_HW, &priv->status);
wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
}
handled |= CSR_INT_BIT_RF_KILL;
}
/* Chip got too hot and stopped itself */
if (inta & CSR_INT_BIT_CT_KILL) {
IWL_ERR(priv, "Microcode CT kill error detected.\n");
priv->isr_stats.ctkill++;
handled |= CSR_INT_BIT_CT_KILL;
}
/* Error detected by uCode */
if (inta & CSR_INT_BIT_SW_ERR) {
IWL_ERR(priv, "Microcode SW error detected. "
" Restarting 0x%X.\n", inta);
priv->isr_stats.sw++;
iwl_irq_handle_error(priv);
handled |= CSR_INT_BIT_SW_ERR;
}
/* uCode wakes up after power-down sleep */
if (inta & CSR_INT_BIT_WAKEUP) {
IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
for (i = 0; i < priv->hw_params.max_txq_num; i++)
iwl_txq_update_write_ptr(priv, &priv->txq[i]);
priv->isr_stats.wakeup++;
handled |= CSR_INT_BIT_WAKEUP;
}
/* All uCode command responses, including Tx command responses,
* Rx "responses" (frame-received notification), and other
* notifications from uCode come through here*/
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
CSR_INT_BIT_RX_PERIODIC)) {
IWL_DEBUG_ISR(priv, "Rx interrupt\n");
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
iwl_write32(priv, CSR_FH_INT_STATUS,
CSR49_FH_INT_RX_MASK);
}
if (inta & CSR_INT_BIT_RX_PERIODIC) {
handled |= CSR_INT_BIT_RX_PERIODIC;
iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
}
/* Sending RX interrupt require many steps to be done in the
* the device:
* 1- write interrupt to current index in ICT table.
* 2- dma RX frame.
* 3- update RX shared data to indicate last write index.
* 4- send interrupt.
* This could lead to RX race, driver could receive RX interrupt
* but the shared data changes does not reflect this;
* periodic interrupt will detect any dangling Rx activity.
*/
/* Disable periodic interrupt; we use it as just a one-shot. */
iwl_write8(priv, CSR_INT_PERIODIC_REG,
CSR_INT_PERIODIC_DIS);
iwl_rx_handle(priv);
/*
* Enable periodic interrupt in 8 msec only if we received
* real RX interrupt (instead of just periodic int), to catch
* any dangling Rx interrupt. If it was just the periodic
* interrupt, there was no dangling Rx activity, and no need
* to extend the periodic interrupt; one-shot is enough.
*/
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
iwl_write8(priv, CSR_INT_PERIODIC_REG,
CSR_INT_PERIODIC_ENA);
priv->isr_stats.rx++;
}
/* This "Tx" DMA channel is used only for loading uCode */
if (inta & CSR_INT_BIT_FH_TX) {
iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
priv->isr_stats.tx++;
handled |= CSR_INT_BIT_FH_TX;
/* Wake up uCode load routine, now that load is complete */
priv->ucode_write_complete = 1;
wake_up_interruptible(&priv->wait_command_queue);
}
if (inta & ~handled) {
IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
priv->isr_stats.unhandled++;
}
if (inta & ~(priv->inta_mask)) {
IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
inta & ~priv->inta_mask);
}
/* Re-enable all interrupts */
/* only Re-enable if diabled by irq */
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl_enable_interrupts(priv);
}
/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
#define ACK_CNT_RATIO (50)
#define BA_TIMEOUT_CNT (5)
#define BA_TIMEOUT_MAX (16)
/**
* iwl_good_ack_health - checks for ACK count ratios, BA timeout retries.
*
* When the ACK count ratio is 0 and aggregated BA timeout retries exceeding
* the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
* operation state.
*/
bool iwl_good_ack_health(struct iwl_priv *priv,
struct iwl_rx_packet *pkt)
{
bool rc = true;
int actual_ack_cnt_delta, expected_ack_cnt_delta;
int ba_timeout_delta;
actual_ack_cnt_delta =
le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) -
le32_to_cpu(priv->_agn.statistics.tx.actual_ack_cnt);
expected_ack_cnt_delta =
le32_to_cpu(pkt->u.stats.tx.expected_ack_cnt) -
le32_to_cpu(priv->_agn.statistics.tx.expected_ack_cnt);
ba_timeout_delta =
le32_to_cpu(pkt->u.stats.tx.agg.ba_timeout) -
le32_to_cpu(priv->_agn.statistics.tx.agg.ba_timeout);
if ((priv->_agn.agg_tids_count > 0) &&
(expected_ack_cnt_delta > 0) &&
(((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta)
< ACK_CNT_RATIO) &&
(ba_timeout_delta > BA_TIMEOUT_CNT)) {
IWL_DEBUG_RADIO(priv, "actual_ack_cnt delta = %d,"
" expected_ack_cnt = %d\n",
actual_ack_cnt_delta, expected_ack_cnt_delta);
#ifdef CONFIG_IWLWIFI_DEBUGFS
/*
* This is ifdef'ed on DEBUGFS because otherwise the
* statistics aren't available. If DEBUGFS is set but
* DEBUG is not, these will just compile out.
*/
IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n",
priv->_agn.delta_statistics.tx.rx_detected_cnt);
IWL_DEBUG_RADIO(priv,
"ack_or_ba_timeout_collision delta = %d\n",
priv->_agn.delta_statistics.tx.
ack_or_ba_timeout_collision);
#endif
IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n",
ba_timeout_delta);
if (!actual_ack_cnt_delta &&
(ba_timeout_delta >= BA_TIMEOUT_MAX))
rc = false;
}
return rc;
}
/*****************************************************************************
*
* sysfs attributes
*
*****************************************************************************/
#ifdef CONFIG_IWLWIFI_DEBUG
/*
* The following adds a new attribute to the sysfs representation
* of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
* used for controlling the debug level.
*
* See the level definitions in iwl for details.
*
* The debug_level being managed using sysfs below is a per device debug
* level that is used instead of the global debug level if it (the per
* device debug level) is set.
*/
static ssize_t show_debug_level(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
}
static ssize_t store_debug_level(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv = dev_get_drvdata(d);
unsigned long val;
int ret;
ret = strict_strtoul(buf, 0, &val);
if (ret)
IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
else {
priv->debug_level = val;
if (iwl_alloc_traffic_mem(priv))
IWL_ERR(priv,
"Not enough memory to generate traffic log\n");
}
return strnlen(buf, count);
}
static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
show_debug_level, store_debug_level);
#endif /* CONFIG_IWLWIFI_DEBUG */
static ssize_t show_temperature(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
if (!iwl_is_alive(priv))
return -EAGAIN;
return sprintf(buf, "%d\n", priv->temperature);
}
static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
static ssize_t show_tx_power(struct device *d,
struct device_attribute *attr, char *buf)
{
struct iwl_priv *priv = dev_get_drvdata(d);
if (!iwl_is_ready_rf(priv))
return sprintf(buf, "off\n");
else
return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
}
static ssize_t store_tx_power(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct iwl_priv *priv = dev_get_drvdata(d);
unsigned long val;
int ret;
ret = strict_strtoul(buf, 10, &val);
if (ret)
IWL_INFO(priv, "%s is not in decimal form.\n", buf);
else {
ret = iwl_set_tx_power(priv, val, false);
if (ret)
IWL_ERR(priv, "failed setting tx power (0x%d).\n",
ret);
else
ret = count;
}
return ret;
}
static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
static struct attribute *iwl_sysfs_entries[] = {
&dev_attr_temperature.attr,
&dev_attr_tx_power.attr,
#ifdef CONFIG_IWLWIFI_DEBUG
&dev_attr_debug_level.attr,
#endif
NULL
};
static struct attribute_group iwl_attribute_group = {
.name = NULL, /* put in device directory */
.attrs = iwl_sysfs_entries,
};
/******************************************************************************
*
* uCode download functions
*
******************************************************************************/
static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
{
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
}
static void iwl_nic_start(struct iwl_priv *priv)
{
/* Remove all resets to allow NIC to operate */
iwl_write32(priv, CSR_RESET, 0);
}
struct iwlagn_ucode_capabilities {
u32 max_probe_length;
u32 standard_phy_calibration_size;
bool pan;
};
static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
static int iwl_mac_setup_register(struct iwl_priv *priv,
struct iwlagn_ucode_capabilities *capa);
#define UCODE_EXPERIMENTAL_INDEX 100
#define UCODE_EXPERIMENTAL_TAG "exp"
static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
{
const char *name_pre = priv->cfg->fw_name_pre;
char tag[8];
if (first) {
#ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
priv->fw_index = UCODE_EXPERIMENTAL_INDEX;
strcpy(tag, UCODE_EXPERIMENTAL_TAG);
} else if (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) {
#endif
priv->fw_index = priv->cfg->ucode_api_max;
sprintf(tag, "%d", priv->fw_index);
} else {
priv->fw_index--;
sprintf(tag, "%d", priv->fw_index);
}
if (priv->fw_index < priv->cfg->ucode_api_min) {
IWL_ERR(priv, "no suitable firmware found!\n");
return -ENOENT;
}
sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
IWL_DEBUG_INFO(priv, "attempting to load firmware %s'%s'\n",
(priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
? "EXPERIMENTAL " : "",
priv->firmware_name);
return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
&priv->pci_dev->dev, GFP_KERNEL, priv,
iwl_ucode_callback);
}
struct iwlagn_firmware_pieces {
const void *inst, *data, *init, *init_data, *boot;
size_t inst_size, data_size, init_size, init_data_size, boot_size;
u32 build;
u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
};
static int iwlagn_load_legacy_firmware(struct iwl_priv *priv,
const struct firmware *ucode_raw,
struct iwlagn_firmware_pieces *pieces)
{
struct iwl_ucode_header *ucode = (void *)ucode_raw->data;
u32 api_ver, hdr_size;
const u8 *src;
priv->ucode_ver = le32_to_cpu(ucode->ver);
api_ver = IWL_UCODE_API(priv->ucode_ver);
switch (api_ver) {
default:
/*
* 4965 doesn't revision the firmware file format
* along with the API version, it always uses v1
* file format.
*/
if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) !=
CSR_HW_REV_TYPE_4965) {
hdr_size = 28;
if (ucode_raw->size < hdr_size) {
IWL_ERR(priv, "File size too small!\n");
return -EINVAL;
}
pieces->build = le32_to_cpu(ucode->u.v2.build);
pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
pieces->boot_size = le32_to_cpu(ucode->u.v2.boot_size);
src = ucode->u.v2.data;
break;
}
/* fall through for 4965 */
case 0:
case 1:
case 2:
hdr_size = 24;
if (ucode_raw->size < hdr_size) {
IWL_ERR(priv, "File size too small!\n");
return -EINVAL;
}
pieces->build = 0;
pieces->inst_size = le32_to_cpu(ucode->u.v1.inst_size);
pieces->data_size = le32_to_cpu(ucode->u.v1.data_size);
pieces->init_size = le32_to_cpu(ucode->u.v1.init_size);
pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size);
pieces->boot_size = le32_to_cpu(ucode->u.v1.boot_size);
src = ucode->u.v1.data;
break;
}
/* Verify size of file vs. image size info in file's header */
if (ucode_raw->size != hdr_size + pieces->inst_size +
pieces->data_size + pieces->init_size +
pieces->init_data_size + pieces->boot_size) {
IWL_ERR(priv,
"uCode file size %d does not match expected size\n",
(int)ucode_raw->size);
return -EINVAL;
}
pieces->inst = src;
src += pieces->inst_size;
pieces->data = src;
src += pieces->data_size;
pieces->init = src;
src += pieces->init_size;
pieces->init_data = src;
src += pieces->init_data_size;
pieces->boot = src;
src += pieces->boot_size;
return 0;
}
static int iwlagn_wanted_ucode_alternative = 1;
static int iwlagn_load_firmware(struct iwl_priv *priv,
const struct firmware *ucode_raw,
struct iwlagn_firmware_pieces *pieces,
struct iwlagn_ucode_capabilities *capa)
{
struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data;
struct iwl_ucode_tlv *tlv;
size_t len = ucode_raw->size;
const u8 *data;
int wanted_alternative = iwlagn_wanted_ucode_alternative, tmp;
u64 alternatives;
u32 tlv_len;
enum iwl_ucode_tlv_type tlv_type;
const u8 *tlv_data;
if (len < sizeof(*ucode)) {
IWL_ERR(priv, "uCode has invalid length: %zd\n", len);
return -EINVAL;
}
if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) {
IWL_ERR(priv, "invalid uCode magic: 0X%x\n",
le32_to_cpu(ucode->magic));
return -EINVAL;
}
/*
* Check which alternatives are present, and "downgrade"
* when the chosen alternative is not present, warning
* the user when that happens. Some files may not have
* any alternatives, so don't warn in that case.
*/
alternatives = le64_to_cpu(ucode->alternatives);
tmp = wanted_alternative;
if (wanted_alternative > 63)
wanted_alternative = 63;
while (wanted_alternative && !(alternatives & BIT(wanted_alternative)))
wanted_alternative--;
if (wanted_alternative && wanted_alternative != tmp)
IWL_WARN(priv,
"uCode alternative %d not available, choosing %d\n",
tmp, wanted_alternative);
priv->ucode_ver = le32_to_cpu(ucode->ver);
pieces->build = le32_to_cpu(ucode->build);
data = ucode->data;
len -= sizeof(*ucode);
while (len >= sizeof(*tlv)) {
u16 tlv_alt;
len -= sizeof(*tlv);
tlv = (void *)data;
tlv_len = le32_to_cpu(tlv->length);
tlv_type = le16_to_cpu(tlv->type);
tlv_alt = le16_to_cpu(tlv->alternative);
tlv_data = tlv->data;
if (len < tlv_len) {
IWL_ERR(priv, "invalid TLV len: %zd/%u\n",
len, tlv_len);
return -EINVAL;
}
len -= ALIGN(tlv_len, 4);
data += sizeof(*tlv) + ALIGN(tlv_len, 4);
/*
* Alternative 0 is always valid.
*
* Skip alternative TLVs that are not selected.
*/
if (tlv_alt != 0 && tlv_alt != wanted_alternative)
continue;
switch (tlv_type) {
case IWL_UCODE_TLV_INST:
pieces->inst = tlv_data;
pieces->inst_size = tlv_len;
break;
case IWL_UCODE_TLV_DATA:
pieces->data = tlv_data;
pieces->data_size = tlv_len;
break;
case IWL_UCODE_TLV_INIT:
pieces->init = tlv_data;
pieces->init_size = tlv_len;
break;
case IWL_UCODE_TLV_INIT_DATA:
pieces->init_data = tlv_data;
pieces->init_data_size = tlv_len;
break;
case IWL_UCODE_TLV_BOOT:
pieces->boot = tlv_data;
pieces->boot_size = tlv_len;
break;
case IWL_UCODE_TLV_PROBE_MAX_LEN:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
capa->max_probe_length =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_PAN:
if (tlv_len)
goto invalid_tlv_len;
capa->pan = true;
break;
case IWL_UCODE_TLV_INIT_EVTLOG_PTR:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->init_evtlog_ptr =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_INIT_EVTLOG_SIZE:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->init_evtlog_size =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_INIT_ERRLOG_PTR:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->init_errlog_ptr =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_RUNT_EVTLOG_PTR:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->inst_evtlog_ptr =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->inst_evtlog_size =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_RUNT_ERRLOG_PTR:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->inst_errlog_ptr =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_ENHANCE_SENS_TBL:
if (tlv_len)
goto invalid_tlv_len;
priv->enhance_sensitivity_table = true;
break;
case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
capa->standard_phy_calibration_size =
le32_to_cpup((__le32 *)tlv_data);
break;
default:
IWL_WARN(priv, "unknown TLV: %d\n", tlv_type);
break;
}
}
if (len) {
IWL_ERR(priv, "invalid TLV after parsing: %zd\n", len);
iwl_print_hex_dump(priv, IWL_DL_FW, (u8 *)data, len);
return -EINVAL;
}
return 0;
invalid_tlv_len:
IWL_ERR(priv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len);
iwl_print_hex_dump(priv, IWL_DL_FW, tlv_data, tlv_len);
return -EINVAL;
}
/**
* iwl_ucode_callback - callback when firmware was loaded
*
* If loaded successfully, copies the firmware into buffers
* for the card to fetch (via DMA).
*/
static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
{
struct iwl_priv *priv = context;
struct iwl_ucode_header *ucode;
int err;
struct iwlagn_firmware_pieces pieces;
const unsigned int api_max = priv->cfg->ucode_api_max;
const unsigned int api_min = priv->cfg->ucode_api_min;
u32 api_ver;
char buildstr[25];
u32 build;
struct iwlagn_ucode_capabilities ucode_capa = {
.max_probe_length = 200,
.standard_phy_calibration_size =
IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE,
};
memset(&pieces, 0, sizeof(pieces));
if (!ucode_raw) {
if (priv->fw_index <= priv->cfg->ucode_api_max)
IWL_ERR(priv,
"request for firmware file '%s' failed.\n",
priv->firmware_name);
goto try_again;
}
IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
priv->firmware_name, ucode_raw->size);
/* Make sure that we got at least the API version number */
if (ucode_raw->size < 4) {
IWL_ERR(priv, "File size way too small!\n");
goto try_again;
}
/* Data from ucode file: header followed by uCode images */
ucode = (struct iwl_ucode_header *)ucode_raw->data;
if (ucode->ver)
err = iwlagn_load_legacy_firmware(priv, ucode_raw, &pieces);
else
err = iwlagn_load_firmware(priv, ucode_raw, &pieces,
&ucode_capa);
if (err)
goto try_again;
api_ver = IWL_UCODE_API(priv->ucode_ver);
build = pieces.build;
/*
* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
* on the API version read from firmware header from here on forward
*/
/* no api version check required for experimental uCode */
if (priv->fw_index != UCODE_EXPERIMENTAL_INDEX) {
if (api_ver < api_min || api_ver > api_max) {
IWL_ERR(priv,
"Driver unable to support your firmware API. "
"Driver supports v%u, firmware is v%u.\n",
api_max, api_ver);
goto try_again;
}
if (api_ver != api_max)
IWL_ERR(priv,
"Firmware has old API version. Expected v%u, "
"got v%u. New firmware can be obtained "
"from http://www.intellinuxwireless.org.\n",
api_max, api_ver);
}
if (build)
sprintf(buildstr, " build %u%s", build,
(priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
? " (EXP)" : "");
else
buildstr[0] = '\0';
IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u%s\n",
IWL_UCODE_MAJOR(priv->ucode_ver),
IWL_UCODE_MINOR(priv->ucode_ver),
IWL_UCODE_API(priv->ucode_ver),
IWL_UCODE_SERIAL(priv->ucode_ver),
buildstr);
snprintf(priv->hw->wiphy->fw_version,
sizeof(priv->hw->wiphy->fw_version),
"%u.%u.%u.%u%s",
IWL_UCODE_MAJOR(priv->ucode_ver),
IWL_UCODE_MINOR(priv->ucode_ver),
IWL_UCODE_API(priv->ucode_ver),
IWL_UCODE_SERIAL(priv->ucode_ver),
buildstr);
/*
* For any of the failures below (before allocating pci memory)
* we will try to load a version with a smaller API -- maybe the
* user just got a corrupted version of the latest API.
*/
IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
priv->ucode_ver);
IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n",
pieces.inst_size);
IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n",
pieces.data_size);
IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n",
pieces.init_size);
IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n",
pieces.init_data_size);
IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %Zd\n",
pieces.boot_size);
/* Verify that uCode images will fit in card's SRAM */
if (pieces.inst_size > priv->hw_params.max_inst_size) {
IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n",
pieces.inst_size);
goto try_again;
}
if (pieces.data_size > priv->hw_params.max_data_size) {
IWL_ERR(priv, "uCode data len %Zd too large to fit in\n",
pieces.data_size);
goto try_again;
}
if (pieces.init_size > priv->hw_params.max_inst_size) {
IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n",
pieces.init_size);
goto try_again;
}
if (pieces.init_data_size > priv->hw_params.max_data_size) {
IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n",
pieces.init_data_size);
goto try_again;
}
if (pieces.boot_size > priv->hw_params.max_bsm_size) {
IWL_ERR(priv, "uCode boot instr len %Zd too large to fit in\n",
pieces.boot_size);
goto try_again;
}
/* Allocate ucode buffers for card's bus-master loading ... */
/* Runtime instructions and 2 copies of data:
* 1) unmodified from disk
* 2) backup cache for save/restore during power-downs */
priv->ucode_code.len = pieces.inst_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
priv->ucode_data.len = pieces.data_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
priv->ucode_data_backup.len = pieces.data_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
!priv->ucode_data_backup.v_addr)
goto err_pci_alloc;
/* Initialization instructions and data */
if (pieces.init_size && pieces.init_data_size) {
priv->ucode_init.len = pieces.init_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
priv->ucode_init_data.len = pieces.init_data_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
goto err_pci_alloc;
}
/* Bootstrap (instructions only, no data) */
if (pieces.boot_size) {
priv->ucode_boot.len = pieces.boot_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
if (!priv->ucode_boot.v_addr)
goto err_pci_alloc;
}
/* Now that we can no longer fail, copy information */
/*
* The (size - 16) / 12 formula is based on the information recorded
* for each event, which is of mode 1 (including timestamp) for all
* new microcodes that include this information.
*/
priv->_agn.init_evtlog_ptr = pieces.init_evtlog_ptr;
if (pieces.init_evtlog_size)
priv->_agn.init_evtlog_size = (pieces.init_evtlog_size - 16)/12;
else
priv->_agn.init_evtlog_size =
priv->cfg->base_params->max_event_log_size;
priv->_agn.init_errlog_ptr = pieces.init_errlog_ptr;
priv->_agn.inst_evtlog_ptr = pieces.inst_evtlog_ptr;
if (pieces.inst_evtlog_size)
priv->_agn.inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12;
else
priv->_agn.inst_evtlog_size =
priv->cfg->base_params->max_event_log_size;
priv->_agn.inst_errlog_ptr = pieces.inst_errlog_ptr;
if (ucode_capa.pan) {
priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
} else
priv->sta_key_max_num = STA_KEY_MAX_NUM;
/* Copy images into buffers for card's bus-master reads ... */
/* Runtime instructions (first block of data in file) */
IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n",
pieces.inst_size);
memcpy(priv->ucode_code.v_addr, pieces.inst, pieces.inst_size);
IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
/*
* Runtime data
* NOTE: Copy into backup buffer will be done in iwl_up()
*/
IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n",
pieces.data_size);
memcpy(priv->ucode_data.v_addr, pieces.data, pieces.data_size);
memcpy(priv->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
/* Initialization instructions */
if (pieces.init_size) {
IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
pieces.init_size);
memcpy(priv->ucode_init.v_addr, pieces.init, pieces.init_size);
}
/* Initialization data */
if (pieces.init_data_size) {
IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
pieces.init_data_size);
memcpy(priv->ucode_init_data.v_addr, pieces.init_data,
pieces.init_data_size);
}
/* Bootstrap instructions */
IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n",
pieces.boot_size);
memcpy(priv->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
/*
* figure out the offset of chain noise reset and gain commands
* base on the size of standard phy calibration commands table size
*/
if (ucode_capa.standard_phy_calibration_size >
IWL_MAX_PHY_CALIBRATE_TBL_SIZE)
ucode_capa.standard_phy_calibration_size =
IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE;
priv->_agn.phy_calib_chain_noise_reset_cmd =
ucode_capa.standard_phy_calibration_size;
priv->_agn.phy_calib_chain_noise_gain_cmd =
ucode_capa.standard_phy_calibration_size + 1;
/**************************************************
* This is still part of probe() in a sense...
*
* 9. Setup and register with mac80211 and debugfs
**************************************************/
err = iwl_mac_setup_register(priv, &ucode_capa);
if (err)
goto out_unbind;
err = iwl_dbgfs_register(priv, DRV_NAME);
if (err)
IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
err = sysfs_create_group(&priv->pci_dev->dev.kobj,
&iwl_attribute_group);
if (err) {
IWL_ERR(priv, "failed to create sysfs device attributes\n");
goto out_unbind;
}
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
complete(&priv->_agn.firmware_loading_complete);
return;
try_again:
/* try next, if any */
if (iwl_request_firmware(priv, false))
goto out_unbind;
release_firmware(ucode_raw);
return;
err_pci_alloc:
IWL_ERR(priv, "failed to allocate pci memory\n");
iwl_dealloc_ucode_pci(priv);
out_unbind:
complete(&priv->_agn.firmware_loading_complete);
device_release_driver(&priv->pci_dev->dev);
release_firmware(ucode_raw);
}
static const char *desc_lookup_text[] = {
"OK",
"FAIL",
"BAD_PARAM",
"BAD_CHECKSUM",
"NMI_INTERRUPT_WDG",
"SYSASSERT",
"FATAL_ERROR",
"BAD_COMMAND",
"HW_ERROR_TUNE_LOCK",
"HW_ERROR_TEMPERATURE",
"ILLEGAL_CHAN_FREQ",
"VCC_NOT_STABLE",
"FH_ERROR",
"NMI_INTERRUPT_HOST",
"NMI_INTERRUPT_ACTION_PT",
"NMI_INTERRUPT_UNKNOWN",
"UCODE_VERSION_MISMATCH",
"HW_ERROR_ABS_LOCK",
"HW_ERROR_CAL_LOCK_FAIL",
"NMI_INTERRUPT_INST_ACTION_PT",
"NMI_INTERRUPT_DATA_ACTION_PT",
"NMI_TRM_HW_ER",
"NMI_INTERRUPT_TRM",
"NMI_INTERRUPT_BREAK_POINT"
"DEBUG_0",
"DEBUG_1",
"DEBUG_2",
"DEBUG_3",
};
static struct { char *name; u8 num; } advanced_lookup[] = {
{ "NMI_INTERRUPT_WDG", 0x34 },
{ "SYSASSERT", 0x35 },
{ "UCODE_VERSION_MISMATCH", 0x37 },
{ "BAD_COMMAND", 0x38 },
{ "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
{ "FATAL_ERROR", 0x3D },
{ "NMI_TRM_HW_ERR", 0x46 },
{ "NMI_INTERRUPT_TRM", 0x4C },
{ "NMI_INTERRUPT_BREAK_POINT", 0x54 },
{ "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
{ "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
{ "NMI_INTERRUPT_HOST", 0x66 },
{ "NMI_INTERRUPT_ACTION_PT", 0x7C },
{ "NMI_INTERRUPT_UNKNOWN", 0x84 },
{ "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
{ "ADVANCED_SYSASSERT", 0 },
};
static const char *desc_lookup(u32 num)
{
int i;
int max = ARRAY_SIZE(desc_lookup_text);
if (num < max)
return desc_lookup_text[num];
max = ARRAY_SIZE(advanced_lookup) - 1;
for (i = 0; i < max; i++) {
if (advanced_lookup[i].num == num)
break;;
}
return advanced_lookup[i].name;
}
#define ERROR_START_OFFSET (1 * sizeof(u32))
#define ERROR_ELEM_SIZE (7 * sizeof(u32))
void iwl_dump_nic_error_log(struct iwl_priv *priv)
{
u32 data2, line;
u32 desc, time, count, base, data1;
u32 blink1, blink2, ilink1, ilink2;
u32 pc, hcmd;
if (priv->ucode_type == UCODE_INIT) {
base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
if (!base)
base = priv->_agn.init_errlog_ptr;
} else {
base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
if (!base)
base = priv->_agn.inst_errlog_ptr;
}
if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
IWL_ERR(priv,
"Not valid error log pointer 0x%08X for %s uCode\n",
base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
return;
}
count = iwl_read_targ_mem(priv, base);
if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
IWL_ERR(priv, "Start IWL Error Log Dump:\n");
IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
priv->status, count);
}
desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
priv->isr_stats.err_code = desc;
pc = iwl_read_targ_mem(priv, base + 2 * sizeof(u32));
blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
hcmd = iwl_read_targ_mem(priv, base + 22 * sizeof(u32));
trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
blink1, blink2, ilink1, ilink2);
IWL_ERR(priv, "Desc Time "
"data1 data2 line\n");
IWL_ERR(priv, "%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n",
desc_lookup(desc), desc, time, data1, data2, line);
IWL_ERR(priv, "pc blink1 blink2 ilink1 ilink2 hcmd\n");
IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n",
pc, blink1, blink2, ilink1, ilink2, hcmd);
}
#define EVENT_START_OFFSET (4 * sizeof(u32))
/**
* iwl_print_event_log - Dump error event log to syslog
*
*/
static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
u32 num_events, u32 mode,
int pos, char **buf, size_t bufsz)
{
u32 i;
u32 base; /* SRAM byte address of event log header */
u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
u32 ptr; /* SRAM byte address of log data */
u32 ev, time, data; /* event log data */
unsigned long reg_flags;
if (num_events == 0)
return pos;
if (priv->ucode_type == UCODE_INIT) {
base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
if (!base)
base = priv->_agn.init_evtlog_ptr;
} else {
base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
if (!base)
base = priv->_agn.inst_evtlog_ptr;
}
if (mode == 0)
event_size = 2 * sizeof(u32);
else
event_size = 3 * sizeof(u32);
ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
/* Make sure device is powered up for SRAM reads */
spin_lock_irqsave(&priv->reg_lock, reg_flags);
iwl_grab_nic_access(priv);
/* Set starting address; reads will auto-increment */
_iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
rmb();
/* "time" is actually "data" for mode 0 (no timestamp).
* place event id # at far right for easier visual parsing. */
for (i = 0; i < num_events; i++) {
ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
if (mode == 0) {
/* data, ev */
if (bufsz) {
pos += scnprintf(*buf + pos, bufsz - pos,
"EVT_LOG:0x%08x:%04u\n",
time, ev);
} else {
trace_iwlwifi_dev_ucode_event(priv, 0,
time, ev);
IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
time, ev);
}
} else {
data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
if (bufsz) {
pos += scnprintf(*buf + pos, bufsz - pos,
"EVT_LOGT:%010u:0x%08x:%04u\n",
time, data, ev);
} else {
IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
time, data, ev);
trace_iwlwifi_dev_ucode_event(priv, time,
data, ev);
}
}
}
/* Allow device to power down */
iwl_release_nic_access(priv);
spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
return pos;
}
/**
* iwl_print_last_event_logs - Dump the newest # of event log to syslog
*/
static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
u32 num_wraps, u32 next_entry,
u32 size, u32 mode,
int pos, char **buf, size_t bufsz)
{
/*
* display the newest DEFAULT_LOG_ENTRIES entries
* i.e the entries just before the next ont that uCode would fill.
*/
if (num_wraps) {
if (next_entry < size) {
pos = iwl_print_event_log(priv,
capacity - (size - next_entry),
size - next_entry, mode,
pos, buf, bufsz);
pos = iwl_print_event_log(priv, 0,
next_entry, mode,
pos, buf, bufsz);
} else
pos = iwl_print_event_log(priv, next_entry - size,
size, mode, pos, buf, bufsz);
} else {
if (next_entry < size) {
pos = iwl_print_event_log(priv, 0, next_entry,
mode, pos, buf, bufsz);
} else {
pos = iwl_print_event_log(priv, next_entry - size,
size, mode, pos, buf, bufsz);
}
}
return pos;
}
#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
char **buf, bool display)
{
u32 base; /* SRAM byte address of event log header */
u32 capacity; /* event log capacity in # entries */
u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
u32 num_wraps; /* # times uCode wrapped to top of log */
u32 next_entry; /* index of next entry to be written by uCode */
u32 size; /* # entries that we'll print */
u32 logsize;
int pos = 0;
size_t bufsz = 0;
if (priv->ucode_type == UCODE_INIT) {
base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
logsize = priv->_agn.init_evtlog_size;
if (!base)
base = priv->_agn.init_evtlog_ptr;
} else {
base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
logsize = priv->_agn.inst_evtlog_size;
if (!base)
base = priv->_agn.inst_evtlog_ptr;
}
if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
IWL_ERR(priv,
"Invalid event log pointer 0x%08X for %s uCode\n",
base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
return -EINVAL;
}
/* event log header */
capacity = iwl_read_targ_mem(priv, base);
mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
if (capacity > logsize) {
IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
capacity, logsize);
capacity = logsize;
}
if (next_entry > logsize) {
IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
next_entry, logsize);
next_entry = logsize;
}
size = num_wraps ? capacity : next_entry;
/* bail out if nothing in log */
if (size == 0) {
IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
return pos;
}
/* enable/disable bt channel announcement */
priv->bt_ch_announce = iwlagn_bt_ch_announce;
#ifdef CONFIG_IWLWIFI_DEBUG
if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
#else
size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
#endif
IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
size);
#ifdef CONFIG_IWLWIFI_DEBUG
if (display) {
if (full_log)
bufsz = capacity * 48;
else
bufsz = size * 48;
*buf = kmalloc(bufsz, GFP_KERNEL);
if (!*buf)
return -ENOMEM;
}
if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
/*
* if uCode has wrapped back to top of log,
* start at the oldest entry,
* i.e the next one that uCode would fill.
*/
if (num_wraps)
pos = iwl_print_event_log(priv, next_entry,
capacity - next_entry, mode,
pos, buf, bufsz);
/* (then/else) start at top of log */
pos = iwl_print_event_log(priv, 0,
next_entry, mode, pos, buf, bufsz);
} else
pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
next_entry, size, mode,
pos, buf, bufsz);
#else
pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
next_entry, size, mode,
pos, buf, bufsz);
#endif
return pos;
}
static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
{
struct iwl_ct_kill_config cmd;
struct iwl_ct_kill_throttling_config adv_cmd;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&priv->lock, flags);
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
spin_unlock_irqrestore(&priv->lock, flags);
priv->thermal_throttle.ct_kill_toggle = false;
if (priv->cfg->base_params->support_ct_kill_exit) {
adv_cmd.critical_temperature_enter =
cpu_to_le32(priv->hw_params.ct_kill_threshold);
adv_cmd.critical_temperature_exit =
cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
sizeof(adv_cmd), &adv_cmd);
if (ret)
IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
else
IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
"succeeded, "
"critical temperature enter is %d,"
"exit is %d\n",
priv->hw_params.ct_kill_threshold,
priv->hw_params.ct_kill_exit_threshold);
} else {
cmd.critical_temperature_R =
cpu_to_le32(priv->hw_params.ct_kill_threshold);
ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
sizeof(cmd), &cmd);
if (ret)
IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
else
IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
"succeeded, "
"critical temperature is %d\n",
priv->hw_params.ct_kill_threshold);
}
}
static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
{
struct iwl_calib_cfg_cmd calib_cfg_cmd;
struct iwl_host_cmd cmd = {
.id = CALIBRATION_CFG_CMD,
.len = sizeof(struct iwl_calib_cfg_cmd),
.data = &calib_cfg_cmd,
};
memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg);
return iwl_send_cmd(priv, &cmd);
}
/**
* iwl_alive_start - called after REPLY_ALIVE notification received
* from protocol/runtime uCode (initialization uCode's
* Alive gets handled by iwl_init_alive_start()).
*/
static void iwl_alive_start(struct iwl_priv *priv)
{
int ret = 0;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
if (priv->card_alive.is_valid != UCODE_VALID_OK) {
/* We had an error bringing up the hardware, so take it
* all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Alive failed.\n");
goto restart;
}
/* Initialize uCode has loaded Runtime uCode ... verify inst image.
* This is a paranoid check, because we would not have gotten the
* "runtime" alive if code weren't properly loaded. */
if (iwl_verify_ucode(priv)) {
/* Runtime instruction load was bad;
* take it all the way back down so we can try again */
IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
goto restart;
}
ret = priv->cfg->ops->lib->alive_notify(priv);
if (ret) {
IWL_WARN(priv,
"Could not complete ALIVE transition [ntf]: %d\n", ret);
goto restart;
}
/* After the ALIVE response, we can send host commands to the uCode */
set_bit(STATUS_ALIVE, &priv->status);
if (priv->cfg->ops->lib->recover_from_tx_stall) {
/* Enable timer to monitor the driver queues */
mod_timer(&priv->monitor_recover,
jiffies +
msecs_to_jiffies(
priv->cfg->base_params->monitor_recover_period));
}
if (iwl_is_rfkill(priv))
return;
/* download priority table before any calibration request */
if (priv->cfg->bt_params &&
priv->cfg->bt_params->advanced_bt_coexist) {
/* Configure Bluetooth device coexistence support */
priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
priv->cfg->ops->hcmd->send_bt_config(priv);
priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS;
iwlagn_send_prio_tbl(priv);
/* FIXME: w/a to force change uCode BT state machine */
iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
}
if (priv->hw_params.calib_rt_cfg)
iwlagn_send_calib_cfg_rt(priv, priv->hw_params.calib_rt_cfg);
ieee80211_wake_queues(priv->hw);
priv->active_rate = IWL_RATES_MASK;
/* Configure Tx antenna selection based on H/W config */
if (priv->cfg->ops->hcmd->set_tx_ant)
priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
if (iwl_is_associated_ctx(ctx)) {
struct iwl_rxon_cmd *active_rxon =
(struct iwl_rxon_cmd *)&ctx->active;
/* apply any changes in staging */
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
} else {
struct iwl_rxon_context *tmp;
/* Initialize our rx_config data */
for_each_context(priv, tmp)
iwl_connection_init_rx_config(priv, tmp);
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
}
if (priv->cfg->bt_params &&
!priv->cfg->bt_params->advanced_bt_coexist) {
/* Configure Bluetooth device coexistence support */
priv->cfg->ops->hcmd->send_bt_config(priv);
}
iwl_reset_run_time_calib(priv);
set_bit(STATUS_READY, &priv->status);
/* Configure the adapter for unassociated operation */
iwlcore_commit_rxon(priv, ctx);
/* At this point, the NIC is initialized and operational */
iwl_rf_kill_ct_config(priv);
iwl_leds_init(priv);
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
wake_up_interruptible(&priv->wait_command_queue);
iwl_power_update_mode(priv, true);
IWL_DEBUG_INFO(priv, "Updated power mode\n");
return;
restart:
queue_work(priv->workqueue, &priv->restart);
}
static void iwl_cancel_deferred_work(struct iwl_priv *priv);
static void __iwl_down(struct iwl_priv *priv)
{
unsigned long flags;
int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
iwl_scan_cancel_timeout(priv, 200);
exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
/* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
* to prevent rearm timer */
if (priv->cfg->ops->lib->recover_from_tx_stall)
del_timer_sync(&priv->monitor_recover);
iwl_clear_ucode_stations(priv, NULL);
iwl_dealloc_bcast_stations(priv);
iwl_clear_driver_stations(priv);
/* reset BT coex data */
priv->bt_status = 0;
if (priv->cfg->bt_params)
priv->bt_traffic_load =
priv->cfg->bt_params->bt_init_traffic_load;
else
priv->bt_traffic_load = 0;
priv->bt_sco_active = false;
priv->bt_full_concurrent = false;
priv->bt_ci_compliance = 0;
/* Unblock any waiting calls */
wake_up_interruptible_all(&priv->wait_command_queue);
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
if (!exit_pending)
clear_bit(STATUS_EXIT_PENDING, &priv->status);
/* stop and reset the on-board processor */
iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
/* tell the device to stop sending interrupts */
spin_lock_irqsave(&priv->lock, flags);
iwl_disable_interrupts(priv);
spin_unlock_irqrestore(&priv->lock, flags);
iwl_synchronize_irq(priv);
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
/* If we have not previously called iwl_init() then
* clear all bits but the RF Kill bit and return */
if (!iwl_is_init(priv)) {
priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
STATUS_RF_KILL_HW |
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
STATUS_GEO_CONFIGURED |
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
STATUS_EXIT_PENDING;
goto exit;
}
/* ...otherwise clear out all the status bits but the RF Kill
* bit and continue taking the NIC down. */
priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
STATUS_RF_KILL_HW |
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
STATUS_GEO_CONFIGURED |
test_bit(STATUS_FW_ERROR, &priv->status) <<
STATUS_FW_ERROR |
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
STATUS_EXIT_PENDING;
/* device going down, Stop using ICT table */
if (priv->cfg->ops->lib->isr_ops.disable)
priv->cfg->ops->lib->isr_ops.disable(priv);
iwlagn_txq_ctx_stop(priv);
iwlagn_rxq_stop(priv);
/* Power-down device's busmaster DMA clocks */
iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
udelay(5);
/* Make sure (redundant) we've released our request to stay awake */
iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
/* Stop the device, and put it in low power state */
iwl_apm_stop(priv);
exit:
memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
dev_kfree_skb(priv->beacon_skb);
priv->beacon_skb = NULL;
/* clear out any free frames */
iwl_clear_free_frames(priv);
}
static void iwl_down(struct iwl_priv *priv)
{
mutex_lock(&priv->mutex);
__iwl_down(priv);
mutex_unlock(&priv->mutex);
iwl_cancel_deferred_work(priv);
}
#define HW_READY_TIMEOUT (50)
static int iwl_set_hw_ready(struct iwl_priv *priv)
{
int ret = 0;
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
/* See if we got it */
ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
HW_READY_TIMEOUT);
if (ret != -ETIMEDOUT)
priv->hw_ready = true;
else
priv->hw_ready = false;
IWL_DEBUG_INFO(priv, "hardware %s\n",
(priv->hw_ready == 1) ? "ready" : "not ready");
return ret;
}
static int iwl_prepare_card_hw(struct iwl_priv *priv)
{
int ret = 0;
IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
ret = iwl_set_hw_ready(priv);
if (priv->hw_ready)
return ret;
/* If HW is not ready, prepare the conditions to check again */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_PREPARE);
ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
/* HW should be ready by now, check again. */
if (ret != -ETIMEDOUT)
iwl_set_hw_ready(priv);
return ret;
}
#define MAX_HW_RESTARTS 5
static int __iwl_up(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx;
int i;
int ret;
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
return -EIO;
}
if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
IWL_ERR(priv, "ucode not available for device bringup\n");
return -EIO;
}
for_each_context(priv, ctx) {
ret = iwlagn_alloc_bcast_station(priv, ctx);
if (ret) {
iwl_dealloc_bcast_stations(priv);
return ret;
}
}
iwl_prepare_card_hw(priv);
if (!priv->hw_ready) {
IWL_WARN(priv, "Exit HW not ready\n");
return -EIO;
}
/* If platform's RF_KILL switch is NOT set to KILL */
if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
clear_bit(STATUS_RF_KILL_HW, &priv->status);
else
set_bit(STATUS_RF_KILL_HW, &priv->status);
if (iwl_is_rfkill(priv)) {
wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
iwl_enable_interrupts(priv);
IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
return 0;
}
iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
/* must be initialised before iwl_hw_nic_init */
if (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS))
priv->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
else
priv->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
ret = iwlagn_hw_nic_init(priv);
if (ret) {
IWL_ERR(priv, "Unable to init nic\n");
return ret;
}
/* make sure rfkill handshake bits are cleared */
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
/* clear (again), then enable host interrupts */
iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
iwl_enable_interrupts(priv);
/* really make sure rfkill handshake bits are cleared */
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
/* Copy original ucode data image from disk into backup cache.
* This will be used to initialize the on-board processor's
* data SRAM for a clean start when the runtime program first loads. */
memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
priv->ucode_data.len);
for (i = 0; i < MAX_HW_RESTARTS; i++) {
/* load bootstrap state machine,
* load bootstrap program into processor's memory,
* prepare to load the "initialize" uCode */
ret = priv->cfg->ops->lib->load_ucode(priv);
if (ret) {
IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n",
ret);
continue;
}
/* start card; "initialize" will load runtime ucode */
iwl_nic_start(priv);
IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
return 0;
}
set_bit(STATUS_EXIT_PENDING, &priv->status);
__iwl_down(priv);
clear_bit(STATUS_EXIT_PENDING, &priv->status);
/* tried to restart and config the device for as long as our
* patience could withstand */
IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
return -EIO;
}
/*****************************************************************************
*
* Workqueue callbacks
*
*****************************************************************************/
static void iwl_bg_init_alive_start(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, init_alive_start.work);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
mutex_lock(&priv->mutex);
priv->cfg->ops->lib->init_alive_start(priv);
mutex_unlock(&priv->mutex);
}
static void iwl_bg_alive_start(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, alive_start.work);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* enable dram interrupt */
if (priv->cfg->ops->lib->isr_ops.reset)
priv->cfg->ops->lib->isr_ops.reset(priv);
mutex_lock(&priv->mutex);
iwl_alive_start(priv);
mutex_unlock(&priv->mutex);
}
static void iwl_bg_run_time_calib_work(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv,
run_time_calib_work);
mutex_lock(&priv->mutex);
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status)) {
mutex_unlock(&priv->mutex);
return;
}
if (priv->start_calib) {
if (priv->cfg->bt_params &&
priv->cfg->bt_params->bt_statistics) {
iwl_chain_noise_calibration(priv,
(void *)&priv->_agn.statistics_bt);
iwl_sensitivity_calibration(priv,
(void *)&priv->_agn.statistics_bt);
} else {
iwl_chain_noise_calibration(priv,
(void *)&priv->_agn.statistics);
iwl_sensitivity_calibration(priv,
(void *)&priv->_agn.statistics);
}
}
mutex_unlock(&priv->mutex);
}
static void iwl_bg_restart(struct work_struct *data)
{
struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
struct iwl_rxon_context *ctx;
bool bt_sco, bt_full_concurrent;
u8 bt_ci_compliance;
u8 bt_load;
u8 bt_status;
mutex_lock(&priv->mutex);
for_each_context(priv, ctx)
ctx->vif = NULL;
priv->is_open = 0;
/*
* __iwl_down() will clear the BT status variables,
* which is correct, but when we restart we really
* want to keep them so restore them afterwards.
*
* The restart process will later pick them up and
* re-configure the hw when we reconfigure the BT
* command.
*/
bt_sco = priv->bt_sco_active;
bt_full_concurrent = priv->bt_full_concurrent;
bt_ci_compliance = priv->bt_ci_compliance;
bt_load = priv->bt_traffic_load;
bt_status = priv->bt_status;
__iwl_down(priv);
priv->bt_sco_active = bt_sco;
priv->bt_full_concurrent = bt_full_concurrent;
priv->bt_ci_compliance = bt_ci_compliance;
priv->bt_traffic_load = bt_load;
priv->bt_status = bt_status;
mutex_unlock(&priv->mutex);
iwl_cancel_deferred_work(priv);
ieee80211_restart_hw(priv->hw);
} else {
iwl_down(priv);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
mutex_lock(&priv->mutex);
__iwl_up(priv);
mutex_unlock(&priv->mutex);
}
}
static void iwl_bg_rx_replenish(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, rx_replenish);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
mutex_lock(&priv->mutex);
iwlagn_rx_replenish(priv);
mutex_unlock(&priv->mutex);
}
/*****************************************************************************
*
* mac80211 entry point functions
*
*****************************************************************************/
#define UCODE_READY_TIMEOUT (4 * HZ)
/*
* Not a mac80211 entry point function, but it fits in with all the
* other mac80211 functions grouped here.
*/
static int iwl_mac_setup_register(struct iwl_priv *priv,
struct iwlagn_ucode_capabilities *capa)
{
int ret;
struct ieee80211_hw *hw = priv->hw;
struct iwl_rxon_context *ctx;
hw->rate_control_algorithm = "iwl-agn-rs";
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_NEED_DTIM_PERIOD |
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS;
if (!priv->cfg->base_params->broken_powersave)
hw->flags |= IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
if (priv->cfg->sku & IWL_SKU_N)
hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
IEEE80211_HW_SUPPORTS_STATIC_SMPS;
hw->sta_data_size = sizeof(struct iwl_station_priv);
hw->vif_data_size = sizeof(struct iwl_vif_priv);
for_each_context(priv, ctx) {
hw->wiphy->interface_modes |= ctx->interface_modes;
hw->wiphy->interface_modes |= ctx->exclusive_interface_modes;
}
hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
WIPHY_FLAG_DISABLE_BEACON_HINTS;
/*
* For now, disable PS by default because it affects
* RX performance significantly.
*/
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 2;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&priv->bands[IEEE80211_BAND_2GHZ];
if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&priv->bands[IEEE80211_BAND_5GHZ];
ret = ieee80211_register_hw(priv->hw);
if (ret) {
IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
return ret;
}
priv->mac80211_registered = 1;
return 0;
}
int iwlagn_mac_start(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
int ret;
IWL_DEBUG_MAC80211(priv, "enter\n");
/* we should be verifying the device is ready to be opened */
mutex_lock(&priv->mutex);
ret = __iwl_up(priv);
mutex_unlock(&priv->mutex);
if (ret)
return ret;
if (iwl_is_rfkill(priv))
goto out;
IWL_DEBUG_INFO(priv, "Start UP work done.\n");
/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
ret = wait_event_interruptible_timeout(priv->wait_command_queue,
test_bit(STATUS_READY, &priv->status),
UCODE_READY_TIMEOUT);
if (!ret) {
if (!test_bit(STATUS_READY, &priv->status)) {
IWL_ERR(priv, "START_ALIVE timeout after %dms.\n",
jiffies_to_msecs(UCODE_READY_TIMEOUT));
return -ETIMEDOUT;
}
}
iwl_led_start(priv);
out:
priv->is_open = 1;
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
}
void iwlagn_mac_stop(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (!priv->is_open)
return;
priv->is_open = 0;
iwl_down(priv);
flush_workqueue(priv->workqueue);
/* enable interrupts again in order to receive rfkill changes */
iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
iwl_enable_interrupts(priv);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl_priv *priv = hw->priv;
IWL_DEBUG_MACDUMP(priv, "enter\n");
IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
if (iwlagn_tx_skb(priv, skb))
dev_kfree_skb_any(skb);
IWL_DEBUG_MACDUMP(priv, "leave\n");
return NETDEV_TX_OK;
}
void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_key_conf *keyconf,
struct ieee80211_sta *sta,
u32 iv32, u16 *phase1key)
{
struct iwl_priv *priv = hw->priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
IWL_DEBUG_MAC80211(priv, "enter\n");
iwl_update_tkip_key(priv, vif_priv->ctx, keyconf, sta,
iv32, phase1key);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif, struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
struct iwl_priv *priv = hw->priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *ctx = vif_priv->ctx;
int ret;
u8 sta_id;
bool is_default_wep_key = false;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (priv->cfg->mod_params->sw_crypto) {
IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
return -EOPNOTSUPP;
}
sta_id = iwl_sta_id_or_broadcast(priv, vif_priv->ctx, sta);
if (sta_id == IWL_INVALID_STATION)
return -EINVAL;
mutex_lock(&priv->mutex);
iwl_scan_cancel_timeout(priv, 100);
/*
* If we are getting WEP group key and we didn't receive any key mapping
* so far, we are in legacy wep mode (group key only), otherwise we are
* in 1X mode.
* In legacy wep mode, we use another host command to the uCode.
*/
if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
!sta) {
if (cmd == SET_KEY)
is_default_wep_key = !ctx->key_mapping_keys;
else
is_default_wep_key =
(key->hw_key_idx == HW_KEY_DEFAULT);
}
switch (cmd) {
case SET_KEY:
if (is_default_wep_key)
ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key);
else
ret = iwl_set_dynamic_key(priv, vif_priv->ctx,
key, sta_id);
IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
break;
case DISABLE_KEY:
if (is_default_wep_key)
ret = iwl_remove_default_wep_key(priv, ctx, key);
else
ret = iwl_remove_dynamic_key(priv, ctx, key, sta_id);
IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
break;
default:
ret = -EINVAL;
}
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return ret;
}
int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn)
{
struct iwl_priv *priv = hw->priv;
int ret = -EINVAL;
IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
sta->addr, tid);
if (!(priv->cfg->sku & IWL_SKU_N))
return -EACCES;
mutex_lock(&priv->mutex);
switch (action) {
case IEEE80211_AMPDU_RX_START:
IWL_DEBUG_HT(priv, "start Rx\n");
ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn);
break;
case IEEE80211_AMPDU_RX_STOP:
IWL_DEBUG_HT(priv, "stop Rx\n");
ret = iwl_sta_rx_agg_stop(priv, sta, tid);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
ret = 0;
break;
case IEEE80211_AMPDU_TX_START:
IWL_DEBUG_HT(priv, "start Tx\n");
ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn);
if (ret == 0) {
priv->_agn.agg_tids_count++;
IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
priv->_agn.agg_tids_count);
}
break;
case IEEE80211_AMPDU_TX_STOP:
IWL_DEBUG_HT(priv, "stop Tx\n");
ret = iwlagn_tx_agg_stop(priv, vif, sta, tid);
if ((ret == 0) && (priv->_agn.agg_tids_count > 0)) {
priv->_agn.agg_tids_count--;
IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
priv->_agn.agg_tids_count);
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
ret = 0;
if (priv->cfg->ht_params &&
priv->cfg->ht_params->use_rts_for_aggregation) {
struct iwl_station_priv *sta_priv =
(void *) sta->drv_priv;
/*
* switch off RTS/CTS if it was previously enabled
*/
sta_priv->lq_sta.lq.general_params.flags &=
~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
&sta_priv->lq_sta.lq, CMD_ASYNC, false);
}
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
if (priv->cfg->ht_params &&
priv->cfg->ht_params->use_rts_for_aggregation) {
struct iwl_station_priv *sta_priv =
(void *) sta->drv_priv;
/*
* switch to RTS/CTS if it is the prefer protection
* method for HT traffic
*/
sta_priv->lq_sta.lq.general_params.flags |=
LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
&sta_priv->lq_sta.lq, CMD_ASYNC, false);
}
ret = 0;
break;
}
mutex_unlock(&priv->mutex);
return ret;
}
int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct iwl_priv *priv = hw->priv;
struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
bool is_ap = vif->type == NL80211_IFTYPE_STATION;
int ret;
u8 sta_id;
IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
sta->addr);
mutex_lock(&priv->mutex);
IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
sta->addr);
sta_priv->common.sta_id = IWL_INVALID_STATION;
atomic_set(&sta_priv->pending_frames, 0);
if (vif->type == NL80211_IFTYPE_AP)
sta_priv->client = true;
ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr,
is_ap, sta, &sta_id);
if (ret) {
IWL_ERR(priv, "Unable to add station %pM (%d)\n",
sta->addr, ret);
/* Should we return success if return code is EEXIST ? */
mutex_unlock(&priv->mutex);
return ret;
}
sta_priv->common.sta_id = sta_id;
/* Initialize rate scaling */
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
sta->addr);
iwl_rs_rate_init(priv, sta, sta_id);
mutex_unlock(&priv->mutex);
return 0;
}
void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
struct ieee80211_channel_switch *ch_switch)
{
struct iwl_priv *priv = hw->priv;
const struct iwl_channel_info *ch_info;
struct ieee80211_conf *conf = &hw->conf;
struct ieee80211_channel *channel = ch_switch->channel;
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
/*
* MULTI-FIXME
* When we add support for multiple interfaces, we need to
* revisit this. The channel switch command in the device
* only affects the BSS context, but what does that really
* mean? And what if we get a CSA on the second interface?
* This needs a lot of work.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
u16 ch;
unsigned long flags = 0;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (iwl_is_rfkill(priv))
goto out_exit;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status))
goto out_exit;
if (!iwl_is_associated_ctx(ctx))
goto out_exit;
/* channel switch in progress */
if (priv->switch_rxon.switch_in_progress == true)
goto out_exit;
mutex_lock(&priv->mutex);
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
if (le16_to_cpu(ctx->active.channel) != ch) {
ch_info = iwl_get_channel_info(priv,
channel->band,
ch);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_MAC80211(priv, "invalid channel\n");
goto out;
}
spin_lock_irqsave(&priv->lock, flags);
priv->current_ht_config.smps = conf->smps_mode;
/* Configure HT40 channels */
ctx->ht.enabled = conf_is_ht(conf);
if (ctx->ht.enabled) {
if (conf_is_ht40_minus(conf)) {
ctx->ht.extension_chan_offset =
IEEE80211_HT_PARAM_CHA_SEC_BELOW;
ctx->ht.is_40mhz = true;
} else if (conf_is_ht40_plus(conf)) {
ctx->ht.extension_chan_offset =
IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
ctx->ht.is_40mhz = true;
} else {
ctx->ht.extension_chan_offset =
IEEE80211_HT_PARAM_CHA_SEC_NONE;
ctx->ht.is_40mhz = false;
}
} else
ctx->ht.is_40mhz = false;
if ((le16_to_cpu(ctx->staging.channel) != ch))
ctx->staging.flags = 0;
iwl_set_rxon_channel(priv, channel, ctx);
iwl_set_rxon_ht(priv, ht_conf);
iwl_set_flags_for_band(priv, ctx, channel->band,
ctx->vif);
spin_unlock_irqrestore(&priv->lock, flags);
iwl_set_rate(priv);
/*
* at this point, staging_rxon has the
* configuration for channel switch
*/
if (priv->cfg->ops->lib->set_channel_switch(priv,
ch_switch))
priv->switch_rxon.switch_in_progress = false;
}
}
out:
mutex_unlock(&priv->mutex);
out_exit:
if (!priv->switch_rxon.switch_in_progress)
ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
void iwlagn_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast)
{
struct iwl_priv *priv = hw->priv;
__le32 filter_or = 0, filter_nand = 0;
struct iwl_rxon_context *ctx;
#define CHK(test, flag) do { \
if (*total_flags & (test)) \
filter_or |= (flag); \
else \
filter_nand |= (flag); \
} while (0)
IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
changed_flags, *total_flags);
CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
#undef CHK
mutex_lock(&priv->mutex);
for_each_context(priv, ctx) {
ctx->staging.filter_flags &= ~filter_nand;
ctx->staging.filter_flags |= filter_or;
/*
* Not committing directly because hardware can perform a scan,
* but we'll eventually commit the filter flags change anyway.
*/
}
mutex_unlock(&priv->mutex);
/*
* Receiving all multicast frames is always enabled by the
* default flags setup in iwl_connection_init_rx_config()
* since we currently do not support programming multicast
* filters into the device.
*/
*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}
void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
{
struct iwl_priv *priv = hw->priv;
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "enter\n");
/* do not support "flush" */
if (!priv->cfg->ops->lib->txfifo_flush)
goto done;
if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n");
goto done;
}
if (iwl_is_rfkill(priv)) {
IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n");
goto done;
}
/*
* mac80211 will not push any more frames for transmit
* until the flush is completed
*/
if (drop) {
IWL_DEBUG_MAC80211(priv, "send flush command\n");
if (priv->cfg->ops->lib->txfifo_flush(priv, IWL_DROP_ALL)) {
IWL_ERR(priv, "flush request fail\n");
goto done;
}
}
IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n");
iwlagn_wait_tx_queue_empty(priv);
done:
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
/*****************************************************************************
*
* driver setup and teardown
*
*****************************************************************************/
static void iwl_setup_deferred_work(struct iwl_priv *priv)
{
priv->workqueue = create_singlethread_workqueue(DRV_NAME);
init_waitqueue_head(&priv->wait_command_queue);
INIT_WORK(&priv->restart, iwl_bg_restart);
INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
iwl_setup_scan_deferred_work(priv);
if (priv->cfg->ops->lib->setup_deferred_work)
priv->cfg->ops->lib->setup_deferred_work(priv);
init_timer(&priv->statistics_periodic);
priv->statistics_periodic.data = (unsigned long)priv;
priv->statistics_periodic.function = iwl_bg_statistics_periodic;
init_timer(&priv->ucode_trace);
priv->ucode_trace.data = (unsigned long)priv;
priv->ucode_trace.function = iwl_bg_ucode_trace;
if (priv->cfg->ops->lib->recover_from_tx_stall) {
init_timer(&priv->monitor_recover);
priv->monitor_recover.data = (unsigned long)priv;
priv->monitor_recover.function =
priv->cfg->ops->lib->recover_from_tx_stall;
}
if (!priv->cfg->base_params->use_isr_legacy)
tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
iwl_irq_tasklet, (unsigned long)priv);
else
tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
iwl_irq_tasklet_legacy, (unsigned long)priv);
}
static void iwl_cancel_deferred_work(struct iwl_priv *priv)
{
if (priv->cfg->ops->lib->cancel_deferred_work)
priv->cfg->ops->lib->cancel_deferred_work(priv);
cancel_delayed_work_sync(&priv->init_alive_start);
cancel_delayed_work(&priv->alive_start);
cancel_work_sync(&priv->run_time_calib_work);
cancel_work_sync(&priv->beacon_update);
iwl_cancel_scan_deferred_work(priv);
cancel_work_sync(&priv->bt_full_concurrency);
cancel_work_sync(&priv->bt_runtime_config);
del_timer_sync(&priv->statistics_periodic);
del_timer_sync(&priv->ucode_trace);
}
static void iwl_init_hw_rates(struct iwl_priv *priv,
struct ieee80211_rate *rates)
{
int i;
for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
rates[i].bitrate = iwl_rates[i].ieee * 5;
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
rates[i].flags = 0;
if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
/*
* If CCK != 1M then set short preamble rate flag.
*/
rates[i].flags |=
(iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
0 : IEEE80211_RATE_SHORT_PREAMBLE;
}
}
}
static int iwl_init_drv(struct iwl_priv *priv)
{
int ret;
spin_lock_init(&priv->sta_lock);
spin_lock_init(&priv->hcmd_lock);
INIT_LIST_HEAD(&priv->free_frames);
mutex_init(&priv->mutex);
mutex_init(&priv->sync_cmd_mutex);
priv->ieee_channels = NULL;
priv->ieee_rates = NULL;
priv->band = IEEE80211_BAND_2GHZ;
priv->iw_mode = NL80211_IFTYPE_STATION;
priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
priv->_agn.agg_tids_count = 0;
/* initialize force reset */
priv->force_reset[IWL_RF_RESET].reset_duration =
IWL_DELAY_NEXT_FORCE_RF_RESET;
priv->force_reset[IWL_FW_RESET].reset_duration =
IWL_DELAY_NEXT_FORCE_FW_RELOAD;
/* Choose which receivers/antennas to use */
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv,
&priv->contexts[IWL_RXON_CTX_BSS]);
iwl_init_scan_params(priv);
/* init bt coex */
if (priv->cfg->bt_params &&
priv->cfg->bt_params->advanced_bt_coexist) {
priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
priv->bt_duration = BT_DURATION_LIMIT_DEF;
priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
}
/* Set the tx_power_user_lmt to the lowest power level
* this value will get overwritten by channel max power avg
* from eeprom */
priv->tx_power_user_lmt = IWLAGN_TX_POWER_TARGET_POWER_MIN;
priv->tx_power_next = IWLAGN_TX_POWER_TARGET_POWER_MIN;
ret = iwl_init_channel_map(priv);
if (ret) {
IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
goto err;
}
ret = iwlcore_init_geos(priv);
if (ret) {
IWL_ERR(priv, "initializing geos failed: %d\n", ret);
goto err_free_channel_map;
}
iwl_init_hw_rates(priv, priv->ieee_rates);
return 0;
err_free_channel_map:
iwl_free_channel_map(priv);
err:
return ret;
}
static void iwl_uninit_drv(struct iwl_priv *priv)
{
iwl_calib_free_results(priv);
iwlcore_free_geos(priv);
iwl_free_channel_map(priv);
kfree(priv->scan_cmd);
}
#ifdef CONFIG_IWL5000
struct ieee80211_ops iwlagn_hw_ops = {
.tx = iwlagn_mac_tx,
.start = iwlagn_mac_start,
.stop = iwlagn_mac_stop,
.add_interface = iwl_mac_add_interface,
.remove_interface = iwl_mac_remove_interface,
.change_interface = iwl_mac_change_interface,
.config = iwlagn_mac_config,
.configure_filter = iwlagn_configure_filter,
.set_key = iwlagn_mac_set_key,
.update_tkip_key = iwlagn_mac_update_tkip_key,
.conf_tx = iwl_mac_conf_tx,
.bss_info_changed = iwlagn_bss_info_changed,
.ampdu_action = iwlagn_mac_ampdu_action,
.hw_scan = iwl_mac_hw_scan,
.sta_notify = iwlagn_mac_sta_notify,
.sta_add = iwlagn_mac_sta_add,
.sta_remove = iwl_mac_sta_remove,
.channel_switch = iwlagn_mac_channel_switch,
.flush = iwlagn_mac_flush,
.tx_last_beacon = iwl_mac_tx_last_beacon,
};
#endif
static void iwl_hw_detect(struct iwl_priv *priv)
{
priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", priv->rev_id);
}
static int iwl_set_hw_params(struct iwl_priv *priv)
{
priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
if (priv->cfg->mod_params->amsdu_size_8K)
priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K);
else
priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K);
priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
if (priv->cfg->mod_params->disable_11n)
priv->cfg->sku &= ~IWL_SKU_N;
/* Device-specific setup */
return priv->cfg->ops->lib->set_hw_params(priv);
}
static const u8 iwlagn_bss_ac_to_fifo[] = {
IWL_TX_FIFO_VO,
IWL_TX_FIFO_VI,
IWL_TX_FIFO_BE,
IWL_TX_FIFO_BK,
};
static const u8 iwlagn_bss_ac_to_queue[] = {
0, 1, 2, 3,
};
static const u8 iwlagn_pan_ac_to_fifo[] = {
IWL_TX_FIFO_VO_IPAN,
IWL_TX_FIFO_VI_IPAN,
IWL_TX_FIFO_BE_IPAN,
IWL_TX_FIFO_BK_IPAN,
};
static const u8 iwlagn_pan_ac_to_queue[] = {
7, 6, 5, 4,
};
static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int err = 0, i;
struct iwl_priv *priv;
struct ieee80211_hw *hw;
struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
unsigned long flags;
u16 pci_cmd, num_mac;
/************************
* 1. Allocating HW data
************************/
/* Disabling hardware scan means that mac80211 will perform scans
* "the hard way", rather than using device's scan. */
if (cfg->mod_params->disable_hw_scan) {
dev_printk(KERN_DEBUG, &(pdev->dev),
"sw scan support is deprecated\n");
#ifdef CONFIG_IWL5000
iwlagn_hw_ops.hw_scan = NULL;
#endif
#ifdef CONFIG_IWL4965
iwl4965_hw_ops.hw_scan = NULL;
#endif
}
hw = iwl_alloc_all(cfg);
if (!hw) {
err = -ENOMEM;
goto out;
}
priv = hw->priv;
/* At this point both hw and priv are allocated. */
/*
* The default context is always valid,
* more may be discovered when firmware
* is loaded.
*/
priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
for (i = 0; i < NUM_IWL_RXON_CTX; i++)
priv->contexts[i].ctxid = i;
priv->contexts[IWL_RXON_CTX_BSS].always_active = true;
priv->contexts[IWL_RXON_CTX_BSS].is_active = true;
priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo = iwlagn_bss_ac_to_fifo;
priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue = iwlagn_bss_ac_to_queue;
priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes =
BIT(NL80211_IFTYPE_ADHOC);
priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
BIT(NL80211_IFTYPE_STATION);
priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON;
priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd = REPLY_WIPAN_RXON_TIMING;
priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd = REPLY_WIPAN_RXON_ASSOC;
priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM;
priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN;
priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY;
priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID;
priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION;
priv->contexts[IWL_RXON_CTX_PAN].ac_to_fifo = iwlagn_pan_ac_to_fifo;
priv->contexts[IWL_RXON_CTX_PAN].ac_to_queue = iwlagn_pan_ac_to_queue;
priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE;
priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
SET_IEEE80211_DEV(hw, &pdev->dev);
IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
priv->cfg = cfg;
priv->pci_dev = pdev;
priv->inta_mask = CSR_INI_SET_MASK;
/* is antenna coupling more than 35dB ? */
priv->bt_ant_couple_ok =
(iwlagn_ant_coupling > IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
true : false;
/* enable/disable bt channel announcement */
priv->bt_ch_announce = iwlagn_bt_ch_announce;
if (iwl_alloc_traffic_mem(priv))
IWL_ERR(priv, "Not enough memory to generate traffic log\n");
/**************************
* 2. Initializing PCI bus
**************************/
pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
PCIE_LINK_STATE_CLKPM);
if (pci_enable_device(pdev)) {
err = -ENODEV;
goto out_ieee80211_free_hw;
}
pci_set_master(pdev);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
if (err) {
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
/* both attempts failed: */
if (err) {
IWL_WARN(priv, "No suitable DMA available.\n");
goto out_pci_disable_device;
}
}
err = pci_request_regions(pdev, DRV_NAME);
if (err)
goto out_pci_disable_device;
pci_set_drvdata(pdev, priv);
/***********************
* 3. Read REV register
***********************/
priv->hw_base = pci_iomap(pdev, 0, 0);
if (!priv->hw_base) {
err = -ENODEV;
goto out_pci_release_regions;
}
IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
(unsigned long long) pci_resource_len(pdev, 0));
IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
/* these spin locks will be used in apm_ops.init and EEPROM access
* we should init now
*/
spin_lock_init(&priv->reg_lock);
spin_lock_init(&priv->lock);
/*
* stop and reset the on-board processor just in case it is in a
* strange state ... like being left stranded by a primary kernel
* and this is now the kdump kernel trying to start up
*/
iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
iwl_hw_detect(priv);
IWL_INFO(priv, "Detected %s, REV=0x%X\n",
priv->cfg->name, priv->hw_rev);
/* We disable the RETRY_TIMEOUT register (0x41) to keep
* PCI Tx retries from interfering with C3 CPU state */
pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
iwl_prepare_card_hw(priv);
if (!priv->hw_ready) {
IWL_WARN(priv, "Failed, HW not ready\n");
goto out_iounmap;
}
/*****************
* 4. Read EEPROM
*****************/
/* Read the EEPROM */
err = iwl_eeprom_init(priv);
if (err) {
IWL_ERR(priv, "Unable to init EEPROM\n");
goto out_iounmap;
}
err = iwl_eeprom_check_version(priv);
if (err)
goto out_free_eeprom;
err = iwl_eeprom_check_sku(priv);
if (err)
goto out_free_eeprom;
/* extract MAC Address */
iwl_eeprom_get_mac(priv, priv->addresses[0].addr);
IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
priv->hw->wiphy->addresses = priv->addresses;
priv->hw->wiphy->n_addresses = 1;
num_mac = iwl_eeprom_query16(priv, EEPROM_NUM_MAC_ADDRESS);
if (num_mac > 1) {
memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
ETH_ALEN);
priv->addresses[1].addr[5]++;
priv->hw->wiphy->n_addresses++;
}
/************************
* 5. Setup HW constants
************************/
if (iwl_set_hw_params(priv)) {
IWL_ERR(priv, "failed to set hw parameters\n");
goto out_free_eeprom;
}
/*******************
* 6. Setup priv
*******************/
err = iwl_init_drv(priv);
if (err)
goto out_free_eeprom;
/* At this point both hw and priv are initialized. */
/********************
* 7. Setup services
********************/
spin_lock_irqsave(&priv->lock, flags);
iwl_disable_interrupts(priv);
spin_unlock_irqrestore(&priv->lock, flags);
pci_enable_msi(priv->pci_dev);
if (priv->cfg->ops->lib->isr_ops.alloc)
priv->cfg->ops->lib->isr_ops.alloc(priv);
err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr,
IRQF_SHARED, DRV_NAME, priv);
if (err) {
IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
goto out_disable_msi;
}
iwl_setup_deferred_work(priv);
iwl_setup_rx_handlers(priv);
/*********************************************
* 8. Enable interrupts and read RFKILL state
*********************************************/
/* enable interrupts if needed: hw bug w/a */
pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
}
iwl_enable_interrupts(priv);
/* If platform's RF_KILL switch is NOT set to KILL */
if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
clear_bit(STATUS_RF_KILL_HW, &priv->status);
else
set_bit(STATUS_RF_KILL_HW, &priv->status);
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->status));
iwl_power_initialize(priv);
iwl_tt_initialize(priv);
init_completion(&priv->_agn.firmware_loading_complete);
err = iwl_request_firmware(priv, true);
if (err)
goto out_destroy_workqueue;
return 0;
out_destroy_workqueue:
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
free_irq(priv->pci_dev->irq, priv);
if (priv->cfg->ops->lib->isr_ops.free)
priv->cfg->ops->lib->isr_ops.free(priv);
out_disable_msi:
pci_disable_msi(priv->pci_dev);
iwl_uninit_drv(priv);
out_free_eeprom:
iwl_eeprom_free(priv);
out_iounmap:
pci_iounmap(pdev, priv->hw_base);
out_pci_release_regions:
pci_set_drvdata(pdev, NULL);
pci_release_regions(pdev);
out_pci_disable_device:
pci_disable_device(pdev);
out_ieee80211_free_hw:
iwl_free_traffic_mem(priv);
ieee80211_free_hw(priv->hw);
out:
return err;
}
static void __devexit iwl_pci_remove(struct pci_dev *pdev)
{
struct iwl_priv *priv = pci_get_drvdata(pdev);
unsigned long flags;
if (!priv)
return;
wait_for_completion(&priv->_agn.firmware_loading_complete);
IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
iwl_dbgfs_unregister(priv);
sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
/* ieee80211_unregister_hw call wil cause iwl_mac_stop to
* to be called and iwl_down since we are removing the device
* we need to set STATUS_EXIT_PENDING bit.
*/
set_bit(STATUS_EXIT_PENDING, &priv->status);
if (priv->mac80211_registered) {
ieee80211_unregister_hw(priv->hw);
priv->mac80211_registered = 0;
} else {
iwl_down(priv);
}
/*
* Make sure device is reset to low power before unloading driver.
* This may be redundant with iwl_down(), but there are paths to
* run iwl_down() without calling apm_ops.stop(), and there are
* paths to avoid running iwl_down() at all before leaving driver.
* This (inexpensive) call *makes sure* device is reset.
*/
iwl_apm_stop(priv);
iwl_tt_exit(priv);
/* make sure we flush any pending irq or
* tasklet for the driver
*/
spin_lock_irqsave(&priv->lock, flags);
iwl_disable_interrupts(priv);
spin_unlock_irqrestore(&priv->lock, flags);
iwl_synchronize_irq(priv);
iwl_dealloc_ucode_pci(priv);
if (priv->rxq.bd)
iwlagn_rx_queue_free(priv, &priv->rxq);
iwlagn_hw_txq_ctx_free(priv);
iwl_eeprom_free(priv);
/*netif_stop_queue(dev); */
flush_workqueue(priv->workqueue);
/* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
* priv->workqueue... so we can't take down the workqueue
* until now... */
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
iwl_free_traffic_mem(priv);
free_irq(priv->pci_dev->irq, priv);
pci_disable_msi(priv->pci_dev);
pci_iounmap(pdev, priv->hw_base);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
iwl_uninit_drv(priv);
if (priv->cfg->ops->lib->isr_ops.free)
priv->cfg->ops->lib->isr_ops.free(priv);
dev_kfree_skb(priv->beacon_skb);
ieee80211_free_hw(priv->hw);
}
/*****************************************************************************
*
* driver and module entry point
*
*****************************************************************************/
/* Hardware specific file defines the PCI IDs table for that hardware module */
static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
#ifdef CONFIG_IWL4965
{IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
{IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
#endif /* CONFIG_IWL4965 */
#ifdef CONFIG_IWL5000
/* 5100 Series WiFi */
{IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */
/* 5300 Series WiFi */
{IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */
/* 5350 Series WiFi/WiMax */
{IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */
/* 5150 Series Wifi/WiMax */
{IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */
/* 6x00 Series */
{IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)},
{IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)},
{IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)},
{IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)},
{IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)},
{IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)},
{IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)},
{IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)},
{IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
{IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
/* 6x00 Series Gen2a */
{IWL_PCI_DEVICE(0x0082, 0x1301, iwl6000g2a_2agn_cfg)},
{IWL_PCI_DEVICE(0x0082, 0x1306, iwl6000g2a_2abg_cfg)},
{IWL_PCI_DEVICE(0x0082, 0x1307, iwl6000g2a_2bg_cfg)},
{IWL_PCI_DEVICE(0x0082, 0x1321, iwl6000g2a_2agn_cfg)},
{IWL_PCI_DEVICE(0x0082, 0x1326, iwl6000g2a_2abg_cfg)},
{IWL_PCI_DEVICE(0x0085, 0x1311, iwl6000g2a_2agn_cfg)},
{IWL_PCI_DEVICE(0x0085, 0x1316, iwl6000g2a_2abg_cfg)},
/* 6x00 Series Gen2b */
{IWL_PCI_DEVICE(0x008A, 0x5305, iwl6000g2b_bgn_cfg)},
{IWL_PCI_DEVICE(0x008A, 0x5307, iwl6000g2b_bg_cfg)},
{IWL_PCI_DEVICE(0x008A, 0x5325, iwl6000g2b_bgn_cfg)},
{IWL_PCI_DEVICE(0x008A, 0x5327, iwl6000g2b_bg_cfg)},
{IWL_PCI_DEVICE(0x008B, 0x5315, iwl6000g2b_bgn_cfg)},
{IWL_PCI_DEVICE(0x008B, 0x5317, iwl6000g2b_bg_cfg)},
{IWL_PCI_DEVICE(0x0090, 0x5211, iwl6000g2b_2agn_cfg)},
{IWL_PCI_DEVICE(0x0090, 0x5215, iwl6000g2b_2bgn_cfg)},
{IWL_PCI_DEVICE(0x0090, 0x5216, iwl6000g2b_2abg_cfg)},
{IWL_PCI_DEVICE(0x0091, 0x5201, iwl6000g2b_2agn_cfg)},
{IWL_PCI_DEVICE(0x0091, 0x5205, iwl6000g2b_2bgn_cfg)},
{IWL_PCI_DEVICE(0x0091, 0x5206, iwl6000g2b_2abg_cfg)},
{IWL_PCI_DEVICE(0x0091, 0x5207, iwl6000g2b_2bg_cfg)},
{IWL_PCI_DEVICE(0x0091, 0x5221, iwl6000g2b_2agn_cfg)},
{IWL_PCI_DEVICE(0x0091, 0x5225, iwl6000g2b_2bgn_cfg)},
{IWL_PCI_DEVICE(0x0091, 0x5226, iwl6000g2b_2abg_cfg)},
/* 6x50 WiFi/WiMax Series */
{IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
{IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)},
{IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)},
{IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)},
{IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
{IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
/* 6x50 WiFi/WiMax Series Gen2 */
{IWL_PCI_DEVICE(0x0885, 0x1305, iwl6050g2_bgn_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1306, iwl6050g2_bgn_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1325, iwl6050g2_bgn_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1326, iwl6050g2_bgn_cfg)},
{IWL_PCI_DEVICE(0x0886, 0x1315, iwl6050g2_bgn_cfg)},
{IWL_PCI_DEVICE(0x0886, 0x1316, iwl6050g2_bgn_cfg)},
/* 1000 Series WiFi */
{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
{IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
{IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)},
{IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)},
{IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)},
{IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)},
{IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)},
{IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)},
{IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)},
{IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)},
{IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)},
{IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)},
/* 100 Series WiFi */
{IWL_PCI_DEVICE(0x08AE, 0x1005, iwl100_bgn_cfg)},
{IWL_PCI_DEVICE(0x08AE, 0x1007, iwl100_bg_cfg)},
{IWL_PCI_DEVICE(0x08AF, 0x1015, iwl100_bgn_cfg)},
{IWL_PCI_DEVICE(0x08AF, 0x1017, iwl100_bg_cfg)},
{IWL_PCI_DEVICE(0x08AE, 0x1025, iwl100_bgn_cfg)},
{IWL_PCI_DEVICE(0x08AE, 0x1027, iwl100_bg_cfg)},
/* 130 Series WiFi */
{IWL_PCI_DEVICE(0x0896, 0x5005, iwl130_bgn_cfg)},
{IWL_PCI_DEVICE(0x0896, 0x5007, iwl130_bg_cfg)},
{IWL_PCI_DEVICE(0x0897, 0x5015, iwl130_bgn_cfg)},
{IWL_PCI_DEVICE(0x0897, 0x5017, iwl130_bg_cfg)},
{IWL_PCI_DEVICE(0x0896, 0x5025, iwl130_bgn_cfg)},
{IWL_PCI_DEVICE(0x0896, 0x5027, iwl130_bg_cfg)},
#endif /* CONFIG_IWL5000 */
{0}
};
MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
static struct pci_driver iwl_driver = {
.name = DRV_NAME,
.id_table = iwl_hw_card_ids,
.probe = iwl_pci_probe,
.remove = __devexit_p(iwl_pci_remove),
.driver.pm = IWL_PM_OPS,
};
static int __init iwl_init(void)
{
int ret;
pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
pr_info(DRV_COPYRIGHT "\n");
ret = iwlagn_rate_control_register();
if (ret) {
pr_err("Unable to register rate control algorithm: %d\n", ret);
return ret;
}
ret = pci_register_driver(&iwl_driver);
if (ret) {
pr_err("Unable to initialize PCI module\n");
goto error_register;
}
return ret;
error_register:
iwlagn_rate_control_unregister();
return ret;
}
static void __exit iwl_exit(void)
{
pci_unregister_driver(&iwl_driver);
iwlagn_rate_control_unregister();
}
module_exit(iwl_exit);
module_init(iwl_init);
#ifdef CONFIG_IWLWIFI_DEBUG
module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "debug output mask");
#endif
module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO);
MODULE_PARM_DESC(swcrypto50,
"using crypto in software (default 0 [hardware]) (deprecated)");
module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
module_param_named(queues_num50,
iwlagn_mod_params.num_of_queues, int, S_IRUGO);
MODULE_PARM_DESC(queues_num50,
"number of hw queues in 50xx series (deprecated)");
module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
MODULE_PARM_DESC(queues_num, "number of hw queues.");
module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO);
MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality (deprecated)");
module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K,
int, S_IRUGO);
MODULE_PARM_DESC(amsdu_size_8K50,
"enable 8K amsdu size in 50XX series (deprecated)");
module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
int, S_IRUGO);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart50,
"restart firmware in case of error (deprecated)");
module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
module_param_named(
disable_hw_scan, iwlagn_mod_params.disable_hw_scan, int, S_IRUGO);
MODULE_PARM_DESC(disable_hw_scan,
"disable hardware scanning (default 0) (deprecated)");
module_param_named(ucode_alternative, iwlagn_wanted_ucode_alternative, int,
S_IRUGO);
MODULE_PARM_DESC(ucode_alternative,
"specify ucode alternative to use from ucode file");
module_param_named(antenna_coupling, iwlagn_ant_coupling, int, S_IRUGO);
MODULE_PARM_DESC(antenna_coupling,
"specify antenna coupling in dB (defualt: 0 dB)");
module_param_named(bt_ch_announce, iwlagn_bt_ch_announce, bool, S_IRUGO);
MODULE_PARM_DESC(bt_ch_announce,
"Enable BT channel announcement mode (default: enable)");