drivers/net/wireless/cw1200/hwio.c

/*
 * Low-level device IO routines for ST-Ericsson CW1200 drivers
 *
 * Copyright (c) 2010, ST-Ericsson
 * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
 *
 * Based on:
 * ST-Ericsson UMAC CW1200 driver, which is
 * Copyright (c) 2010, ST-Ericsson
 * Author: Ajitpal Singh <ajitpal.singh@lockless.no>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/types.h>

#include "cw1200.h"
#include "hwio.h"
#include "hwbus.h"

 /* Sdio addr is 4*spi_addr */
#define SPI_REG_ADDR_TO_SDIO(spi_reg_addr) ((spi_reg_addr) << 2)
#define SDIO_ADDR17BIT(buf_id, mpf, rfu, reg_id_ofs) \
				((((buf_id)    & 0x1F) << 7) \
				| (((mpf)        & 1) << 6) \
				| (((rfu)        & 1) << 5) \
				| (((reg_id_ofs) & 0x1F) << 0))
#define MAX_RETRY		3


static int __cw1200_reg_read(struct cw1200_common *priv, u16 addr,
			     void *buf, size_t buf_len, int buf_id)
{
	u16 addr_sdio;
	u32 sdio_reg_addr_17bit;

	/* Check if buffer is aligned to 4 byte boundary */
	if (WARN_ON(((unsigned long)buf & 3) && (buf_len > 4))) {
		pr_err("buffer is not aligned.\n");
		return -EINVAL;
	}

	/* Convert to SDIO Register Address */
	addr_sdio = SPI_REG_ADDR_TO_SDIO(addr);
	sdio_reg_addr_17bit = SDIO_ADDR17BIT(buf_id, 0, 0, addr_sdio);

	return priv->hwbus_ops->hwbus_memcpy_fromio(priv->hwbus_priv,
						  sdio_reg_addr_17bit,
						  buf, buf_len);
}

static int __cw1200_reg_write(struct cw1200_common *priv, u16 addr,
				const void *buf, size_t buf_len, int buf_id)
{
	u16 addr_sdio;
	u32 sdio_reg_addr_17bit;

	/* Convert to SDIO Register Address */
	addr_sdio = SPI_REG_ADDR_TO_SDIO(addr);
	sdio_reg_addr_17bit = SDIO_ADDR17BIT(buf_id, 0, 0, addr_sdio);

	return priv->hwbus_ops->hwbus_memcpy_toio(priv->hwbus_priv,
						sdio_reg_addr_17bit,
						buf, buf_len);
}

static inline int __cw1200_reg_read_32(struct cw1200_common *priv,
					u16 addr, u32 *val)
{
	__le32 tmp;
	int i = __cw1200_reg_read(priv, addr, &tmp, sizeof(tmp), 0);
	*val = le32_to_cpu(tmp);
	return i;
}

static inline int __cw1200_reg_write_32(struct cw1200_common *priv,
					u16 addr, u32 val)
{
	__le32 tmp = cpu_to_le32(val);
	return __cw1200_reg_write(priv, addr, &tmp, sizeof(tmp), 0);
}

static inline int __cw1200_reg_read_16(struct cw1200_common *priv,
					u16 addr, u16 *val)
{
	__le16 tmp;
	int i = __cw1200_reg_read(priv, addr, &tmp, sizeof(tmp), 0);
	*val = le16_to_cpu(tmp);
	return i;
}

static inline int __cw1200_reg_write_16(struct cw1200_common *priv,
					u16 addr, u16 val)
{
	__le16 tmp = cpu_to_le16(val);
	return __cw1200_reg_write(priv, addr, &tmp, sizeof(tmp), 0);
}

int cw1200_reg_read(struct cw1200_common *priv, u16 addr, void *buf,
			size_t buf_len)
{
	int ret;
	priv->hwbus_ops->lock(priv->hwbus_priv);
	ret = __cw1200_reg_read(priv, addr, buf, buf_len, 0);
	priv->hwbus_ops->unlock(priv->hwbus_priv);
	return ret;
}

int cw1200_reg_write(struct cw1200_common *priv, u16 addr, const void *buf,
			size_t buf_len)
{
	int ret;
	priv->hwbus_ops->lock(priv->hwbus_priv);
	ret = __cw1200_reg_write(priv, addr, buf, buf_len, 0);
	priv->hwbus_ops->unlock(priv->hwbus_priv);
	return ret;
}

int cw1200_data_read(struct cw1200_common *priv, void *buf, size_t buf_len)
{
	int ret, retry = 1;
	int buf_id_rx = priv->buf_id_rx;

	priv->hwbus_ops->lock(priv->hwbus_priv);

	while (retry <= MAX_RETRY) {
		ret = __cw1200_reg_read(priv,
					ST90TDS_IN_OUT_QUEUE_REG_ID, buf,
					buf_len, buf_id_rx + 1);
		if (!ret) {
			buf_id_rx = (buf_id_rx + 1) & 3;
			priv->buf_id_rx = buf_id_rx;
			break;
		} else {
			retry++;
			mdelay(1);
			pr_err("error :[%d]\n", ret);
		}
	}

	priv->hwbus_ops->unlock(priv->hwbus_priv);
	return ret;
}

int cw1200_data_write(struct cw1200_common *priv, const void *buf,
			size_t buf_len)
{
	int ret, retry = 1;
	int buf_id_tx = priv->buf_id_tx;

	priv->hwbus_ops->lock(priv->hwbus_priv);

	while (retry <= MAX_RETRY) {
		ret = __cw1200_reg_write(priv,
					 ST90TDS_IN_OUT_QUEUE_REG_ID, buf,
					 buf_len, buf_id_tx);
		if (!ret) {
			buf_id_tx = (buf_id_tx + 1) & 31;
			priv->buf_id_tx = buf_id_tx;
			break;
		} else {
			retry++;
			mdelay(1);
			pr_err("error :[%d]\n", ret);
		}
	}

	priv->hwbus_ops->unlock(priv->hwbus_priv);
	return ret;
}

int cw1200_indirect_read(struct cw1200_common *priv, u32 addr, void *buf,
			 size_t buf_len, u32 prefetch, u16 port_addr)
{
	u32 val32 = 0;
	int i, ret;

	if ((buf_len / 2) >= 0x1000) {
		pr_err("Can't read more than 0xfff words.\n");
		return -EINVAL;
	}

	priv->hwbus_ops->lock(priv->hwbus_priv);
	/* Write address */
	ret = __cw1200_reg_write_32(priv, ST90TDS_SRAM_BASE_ADDR_REG_ID, addr);
	if (ret < 0) {
		pr_err("Can't write address register.\n");
		goto out;
	}

	/* Read CONFIG Register Value - We will read 32 bits */
	ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
	if (ret < 0) {
		pr_err("Can't read config register.\n");
		goto out;
	}

	/* Set PREFETCH bit */
	ret = __cw1200_reg_write_32(priv, ST90TDS_CONFIG_REG_ID,
					val32 | prefetch);
	if (ret < 0) {
		pr_err("Can't write prefetch bit.\n");
		goto out;
	}

	/* Check for PRE-FETCH bit to be cleared */
	for (i = 0; i < 20; i++) {
		ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
		if (ret < 0) {
			pr_err("Can't check prefetch bit.\n");
			goto out;
		}
		if (!(val32 & prefetch))
			break;

		mdelay(i);
	}

	if (val32 & prefetch) {
		pr_err("Prefetch bit is not cleared.\n");
		goto out;
	}

	/* Read data port */
	ret = __cw1200_reg_read(priv, port_addr, buf, buf_len, 0);
	if (ret < 0) {
		pr_err("Can't read data port.\n");
		goto out;
	}

out:
	priv->hwbus_ops->unlock(priv->hwbus_priv);
	return ret;
}

int cw1200_apb_write(struct cw1200_common *priv, u32 addr, const void *buf,
			size_t buf_len)
{
	int ret;

	if ((buf_len / 2) >= 0x1000) {
		pr_err("Can't write more than 0xfff words.\n");
		return -EINVAL;
	}

	priv->hwbus_ops->lock(priv->hwbus_priv);

	/* Write address */
	ret = __cw1200_reg_write_32(priv, ST90TDS_SRAM_BASE_ADDR_REG_ID, addr);
	if (ret < 0) {
		pr_err("Can't write address register.\n");
		goto out;
	}

	/* Write data port */
	ret = __cw1200_reg_write(priv, ST90TDS_SRAM_DPORT_REG_ID,
					buf, buf_len, 0);
	if (ret < 0) {
		pr_err("Can't write data port.\n");
		goto out;
	}

out:
	priv->hwbus_ops->unlock(priv->hwbus_priv);
	return ret;
}

int __cw1200_irq_enable(struct cw1200_common *priv, int enable)
{
	u32 val32;
	u16 val16;
	int ret;

	/* We need to do this hack because the SPI layer can sleep on I/O
	   and the general path involves I/O to the device in interrupt
	   context.

	   However, the initial enable call needs to go to the hardware.

	   We don't worry about shutdown because we do a full reset which
	   clears the interrupt enabled bits.
	*/
	if (priv->hwbus_ops->irq_enable) {
		ret = priv->hwbus_ops->irq_enable(priv->hwbus_priv, enable);
		if (ret || enable < 2)
			return ret;
	}

	if (HIF_8601_SILICON == priv->hw_type) {
		ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
		if (ret < 0) {
			pr_err("Can't read config register.\n");
			return ret;
		}

		if (enable)
			val32 |= ST90TDS_CONF_IRQ_RDY_ENABLE;
		else
			val32 &= ~ST90TDS_CONF_IRQ_RDY_ENABLE;

		ret = __cw1200_reg_write_32(priv, ST90TDS_CONFIG_REG_ID, val32);
		if (ret < 0) {
			pr_err("Can't write config register.\n");
			return ret;
		}
	} else {
		ret = __cw1200_reg_read_16(priv, ST90TDS_CONFIG_REG_ID, &val16);
		if (ret < 0) {
			pr_err("Can't read control register.\n");
			return ret;
		}

		if (enable)
			val16 |= ST90TDS_CONT_IRQ_RDY_ENABLE;
		else
			val16 &= ~ST90TDS_CONT_IRQ_RDY_ENABLE;

		ret = __cw1200_reg_write_16(priv, ST90TDS_CONFIG_REG_ID, val16);
		if (ret < 0) {
			pr_err("Can't write control register.\n");
			return ret;
		}
	}
	return 0;
}