| /* |
| * Copyright 2002-2005, Instant802 Networks, Inc. |
| * Copyright 2005-2006, Devicescape Software, Inc. |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <net/mac80211.h> |
| #include <net/ieee80211_radiotap.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/skbuff.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/wireless.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/bitmap.h> |
| #include <net/cfg80211.h> |
| |
| #include "ieee80211_common.h" |
| #include "ieee80211_i.h" |
| #include "ieee80211_rate.h" |
| #include "wep.h" |
| #include "wme.h" |
| #include "aes_ccm.h" |
| #include "ieee80211_led.h" |
| #include "ieee80211_cfg.h" |
| #include "debugfs.h" |
| #include "debugfs_netdev.h" |
| #include "debugfs_key.h" |
| |
| /* privid for wiphys to determine whether they belong to us or not */ |
| void *mac80211_wiphy_privid = &mac80211_wiphy_privid; |
| |
| /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ |
| /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ |
| const unsigned char rfc1042_header[] = |
| { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; |
| |
| /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ |
| const unsigned char bridge_tunnel_header[] = |
| { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; |
| |
| /* No encapsulation header if EtherType < 0x600 (=length) */ |
| static const unsigned char eapol_header[] = |
| { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00, 0x88, 0x8e }; |
| |
| |
| /* |
| * For seeing transmitted packets on monitor interfaces |
| * we have a radiotap header too. |
| */ |
| struct ieee80211_tx_status_rtap_hdr { |
| struct ieee80211_radiotap_header hdr; |
| __le16 tx_flags; |
| u8 data_retries; |
| } __attribute__ ((packed)); |
| |
| |
| struct ieee80211_key_conf * |
| ieee80211_key_data2conf(struct ieee80211_local *local, |
| const struct ieee80211_key *data) |
| { |
| struct ieee80211_key_conf *conf; |
| |
| conf = kmalloc(sizeof(*conf) + data->keylen, GFP_ATOMIC); |
| if (!conf) |
| return NULL; |
| |
| conf->hw_key_idx = data->hw_key_idx; |
| conf->alg = data->alg; |
| conf->keylen = data->keylen; |
| conf->flags = 0; |
| if (data->force_sw_encrypt) |
| conf->flags |= IEEE80211_KEY_FORCE_SW_ENCRYPT; |
| conf->keyidx = data->keyidx; |
| if (data->default_tx_key) |
| conf->flags |= IEEE80211_KEY_DEFAULT_TX_KEY; |
| if (local->default_wep_only) |
| conf->flags |= IEEE80211_KEY_DEFAULT_WEP_ONLY; |
| memcpy(conf->key, data->key, data->keylen); |
| |
| return conf; |
| } |
| |
| struct ieee80211_key *ieee80211_key_alloc(struct ieee80211_sub_if_data *sdata, |
| int idx, size_t key_len, gfp_t flags) |
| { |
| struct ieee80211_key *key; |
| |
| key = kzalloc(sizeof(struct ieee80211_key) + key_len, flags); |
| if (!key) |
| return NULL; |
| kref_init(&key->kref); |
| return key; |
| } |
| |
| static void ieee80211_key_release(struct kref *kref) |
| { |
| struct ieee80211_key *key; |
| |
| key = container_of(kref, struct ieee80211_key, kref); |
| if (key->alg == ALG_CCMP) |
| ieee80211_aes_key_free(key->u.ccmp.tfm); |
| ieee80211_debugfs_key_remove(key); |
| kfree(key); |
| } |
| |
| void ieee80211_key_free(struct ieee80211_key *key) |
| { |
| if (key) |
| kref_put(&key->kref, ieee80211_key_release); |
| } |
| |
| static int rate_list_match(const int *rate_list, int rate) |
| { |
| int i; |
| |
| if (!rate_list) |
| return 0; |
| |
| for (i = 0; rate_list[i] >= 0; i++) |
| if (rate_list[i] == rate) |
| return 1; |
| |
| return 0; |
| } |
| |
| |
| void ieee80211_prepare_rates(struct ieee80211_local *local, |
| struct ieee80211_hw_mode *mode) |
| { |
| int i; |
| |
| for (i = 0; i < mode->num_rates; i++) { |
| struct ieee80211_rate *rate = &mode->rates[i]; |
| |
| rate->flags &= ~(IEEE80211_RATE_SUPPORTED | |
| IEEE80211_RATE_BASIC); |
| |
| if (local->supp_rates[mode->mode]) { |
| if (!rate_list_match(local->supp_rates[mode->mode], |
| rate->rate)) |
| continue; |
| } |
| |
| rate->flags |= IEEE80211_RATE_SUPPORTED; |
| |
| /* Use configured basic rate set if it is available. If not, |
| * use defaults that are sane for most cases. */ |
| if (local->basic_rates[mode->mode]) { |
| if (rate_list_match(local->basic_rates[mode->mode], |
| rate->rate)) |
| rate->flags |= IEEE80211_RATE_BASIC; |
| } else switch (mode->mode) { |
| case MODE_IEEE80211A: |
| if (rate->rate == 60 || rate->rate == 120 || |
| rate->rate == 240) |
| rate->flags |= IEEE80211_RATE_BASIC; |
| break; |
| case MODE_IEEE80211B: |
| if (rate->rate == 10 || rate->rate == 20) |
| rate->flags |= IEEE80211_RATE_BASIC; |
| break; |
| case MODE_ATHEROS_TURBO: |
| if (rate->rate == 120 || rate->rate == 240 || |
| rate->rate == 480) |
| rate->flags |= IEEE80211_RATE_BASIC; |
| break; |
| case MODE_IEEE80211G: |
| if (rate->rate == 10 || rate->rate == 20 || |
| rate->rate == 55 || rate->rate == 110) |
| rate->flags |= IEEE80211_RATE_BASIC; |
| break; |
| } |
| |
| /* Set ERP and MANDATORY flags based on phymode */ |
| switch (mode->mode) { |
| case MODE_IEEE80211A: |
| if (rate->rate == 60 || rate->rate == 120 || |
| rate->rate == 240) |
| rate->flags |= IEEE80211_RATE_MANDATORY; |
| break; |
| case MODE_IEEE80211B: |
| if (rate->rate == 10) |
| rate->flags |= IEEE80211_RATE_MANDATORY; |
| break; |
| case MODE_ATHEROS_TURBO: |
| break; |
| case MODE_IEEE80211G: |
| if (rate->rate == 10 || rate->rate == 20 || |
| rate->rate == 55 || rate->rate == 110 || |
| rate->rate == 60 || rate->rate == 120 || |
| rate->rate == 240) |
| rate->flags |= IEEE80211_RATE_MANDATORY; |
| break; |
| } |
| if (ieee80211_is_erp_rate(mode->mode, rate->rate)) |
| rate->flags |= IEEE80211_RATE_ERP; |
| } |
| } |
| |
| |
| void ieee80211_key_threshold_notify(struct net_device *dev, |
| struct ieee80211_key *key, |
| struct sta_info *sta) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct sk_buff *skb; |
| struct ieee80211_msg_key_notification *msg; |
| |
| /* if no one will get it anyway, don't even allocate it. |
| * unlikely because this is only relevant for APs |
| * where the device must be open... */ |
| if (unlikely(!local->apdev)) |
| return; |
| |
| skb = dev_alloc_skb(sizeof(struct ieee80211_frame_info) + |
| sizeof(struct ieee80211_msg_key_notification)); |
| if (!skb) |
| return; |
| |
| skb_reserve(skb, sizeof(struct ieee80211_frame_info)); |
| msg = (struct ieee80211_msg_key_notification *) |
| skb_put(skb, sizeof(struct ieee80211_msg_key_notification)); |
| msg->tx_rx_count = key->tx_rx_count; |
| memcpy(msg->ifname, dev->name, IFNAMSIZ); |
| if (sta) |
| memcpy(msg->addr, sta->addr, ETH_ALEN); |
| else |
| memset(msg->addr, 0xff, ETH_ALEN); |
| |
| key->tx_rx_count = 0; |
| |
| ieee80211_rx_mgmt(local, skb, NULL, |
| ieee80211_msg_key_threshold_notification); |
| } |
| |
| |
| u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len) |
| { |
| u16 fc; |
| |
| if (len < 24) |
| return NULL; |
| |
| fc = le16_to_cpu(hdr->frame_control); |
| |
| switch (fc & IEEE80211_FCTL_FTYPE) { |
| case IEEE80211_FTYPE_DATA: |
| switch (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { |
| case IEEE80211_FCTL_TODS: |
| return hdr->addr1; |
| case (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS): |
| return NULL; |
| case IEEE80211_FCTL_FROMDS: |
| return hdr->addr2; |
| case 0: |
| return hdr->addr3; |
| } |
| break; |
| case IEEE80211_FTYPE_MGMT: |
| return hdr->addr3; |
| case IEEE80211_FTYPE_CTL: |
| if ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PSPOLL) |
| return hdr->addr1; |
| else |
| return NULL; |
| } |
| |
| return NULL; |
| } |
| |
| int ieee80211_get_hdrlen(u16 fc) |
| { |
| int hdrlen = 24; |
| |
| switch (fc & IEEE80211_FCTL_FTYPE) { |
| case IEEE80211_FTYPE_DATA: |
| if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) |
| hdrlen = 30; /* Addr4 */ |
| /* |
| * The QoS Control field is two bytes and its presence is |
| * indicated by the IEEE80211_STYPE_QOS_DATA bit. Add 2 to |
| * hdrlen if that bit is set. |
| * This works by masking out the bit and shifting it to |
| * bit position 1 so the result has the value 0 or 2. |
| */ |
| hdrlen += (fc & IEEE80211_STYPE_QOS_DATA) |
| >> (ilog2(IEEE80211_STYPE_QOS_DATA)-1); |
| break; |
| case IEEE80211_FTYPE_CTL: |
| /* |
| * ACK and CTS are 10 bytes, all others 16. To see how |
| * to get this condition consider |
| * subtype mask: 0b0000000011110000 (0x00F0) |
| * ACK subtype: 0b0000000011010000 (0x00D0) |
| * CTS subtype: 0b0000000011000000 (0x00C0) |
| * bits that matter: ^^^ (0x00E0) |
| * value of those: 0b0000000011000000 (0x00C0) |
| */ |
| if ((fc & 0xE0) == 0xC0) |
| hdrlen = 10; |
| else |
| hdrlen = 16; |
| break; |
| } |
| |
| return hdrlen; |
| } |
| EXPORT_SYMBOL(ieee80211_get_hdrlen); |
| |
| int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb) |
| { |
| const struct ieee80211_hdr *hdr = (const struct ieee80211_hdr *) skb->data; |
| int hdrlen; |
| |
| if (unlikely(skb->len < 10)) |
| return 0; |
| hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)); |
| if (unlikely(hdrlen > skb->len)) |
| return 0; |
| return hdrlen; |
| } |
| EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); |
| |
| |
| int ieee80211_is_eapol(const struct sk_buff *skb) |
| { |
| const struct ieee80211_hdr *hdr; |
| u16 fc; |
| int hdrlen; |
| |
| if (unlikely(skb->len < 10)) |
| return 0; |
| |
| hdr = (const struct ieee80211_hdr *) skb->data; |
| fc = le16_to_cpu(hdr->frame_control); |
| |
| if (unlikely(!WLAN_FC_DATA_PRESENT(fc))) |
| return 0; |
| |
| hdrlen = ieee80211_get_hdrlen(fc); |
| |
| if (unlikely(skb->len >= hdrlen + sizeof(eapol_header) && |
| memcmp(skb->data + hdrlen, eapol_header, |
| sizeof(eapol_header)) == 0)) |
| return 1; |
| |
| return 0; |
| } |
| |
| |
| void ieee80211_tx_set_iswep(struct ieee80211_txrx_data *tx) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) tx->skb->data; |
| |
| hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); |
| if (tx->u.tx.extra_frag) { |
| struct ieee80211_hdr *fhdr; |
| int i; |
| for (i = 0; i < tx->u.tx.num_extra_frag; i++) { |
| fhdr = (struct ieee80211_hdr *) |
| tx->u.tx.extra_frag[i]->data; |
| fhdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); |
| } |
| } |
| } |
| |
| |
| static int ieee80211_frame_duration(struct ieee80211_local *local, size_t len, |
| int rate, int erp, int short_preamble) |
| { |
| int dur; |
| |
| /* calculate duration (in microseconds, rounded up to next higher |
| * integer if it includes a fractional microsecond) to send frame of |
| * len bytes (does not include FCS) at the given rate. Duration will |
| * also include SIFS. |
| * |
| * rate is in 100 kbps, so divident is multiplied by 10 in the |
| * DIV_ROUND_UP() operations. |
| */ |
| |
| if (local->hw.conf.phymode == MODE_IEEE80211A || erp || |
| local->hw.conf.phymode == MODE_ATHEROS_TURBO) { |
| /* |
| * OFDM: |
| * |
| * N_DBPS = DATARATE x 4 |
| * N_SYM = Ceiling((16+8xLENGTH+6) / N_DBPS) |
| * (16 = SIGNAL time, 6 = tail bits) |
| * TXTIME = T_PREAMBLE + T_SIGNAL + T_SYM x N_SYM + Signal Ext |
| * |
| * T_SYM = 4 usec |
| * 802.11a - 17.5.2: aSIFSTime = 16 usec |
| * 802.11g - 19.8.4: aSIFSTime = 10 usec + |
| * signal ext = 6 usec |
| */ |
| /* FIX: Atheros Turbo may have different (shorter) duration? */ |
| dur = 16; /* SIFS + signal ext */ |
| dur += 16; /* 17.3.2.3: T_PREAMBLE = 16 usec */ |
| dur += 4; /* 17.3.2.3: T_SIGNAL = 4 usec */ |
| dur += 4 * DIV_ROUND_UP((16 + 8 * (len + 4) + 6) * 10, |
| 4 * rate); /* T_SYM x N_SYM */ |
| } else { |
| /* |
| * 802.11b or 802.11g with 802.11b compatibility: |
| * 18.3.4: TXTIME = PreambleLength + PLCPHeaderTime + |
| * Ceiling(((LENGTH+PBCC)x8)/DATARATE). PBCC=0. |
| * |
| * 802.11 (DS): 15.3.3, 802.11b: 18.3.4 |
| * aSIFSTime = 10 usec |
| * aPreambleLength = 144 usec or 72 usec with short preamble |
| * aPLCPHeaderLength = 48 usec or 24 usec with short preamble |
| */ |
| dur = 10; /* aSIFSTime = 10 usec */ |
| dur += short_preamble ? (72 + 24) : (144 + 48); |
| |
| dur += DIV_ROUND_UP(8 * (len + 4) * 10, rate); |
| } |
| |
| return dur; |
| } |
| |
| |
| /* Exported duration function for driver use */ |
| __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, |
| size_t frame_len, int rate) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| u16 dur; |
| int erp; |
| |
| erp = ieee80211_is_erp_rate(hw->conf.phymode, rate); |
| dur = ieee80211_frame_duration(local, frame_len, rate, |
| erp, local->short_preamble); |
| |
| return cpu_to_le16(dur); |
| } |
| EXPORT_SYMBOL(ieee80211_generic_frame_duration); |
| |
| |
| __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, |
| size_t frame_len, |
| const struct ieee80211_tx_control *frame_txctl) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct ieee80211_rate *rate; |
| int short_preamble = local->short_preamble; |
| int erp; |
| u16 dur; |
| |
| rate = frame_txctl->rts_rate; |
| erp = !!(rate->flags & IEEE80211_RATE_ERP); |
| |
| /* CTS duration */ |
| dur = ieee80211_frame_duration(local, 10, rate->rate, |
| erp, short_preamble); |
| /* Data frame duration */ |
| dur += ieee80211_frame_duration(local, frame_len, rate->rate, |
| erp, short_preamble); |
| /* ACK duration */ |
| dur += ieee80211_frame_duration(local, 10, rate->rate, |
| erp, short_preamble); |
| |
| return cpu_to_le16(dur); |
| } |
| EXPORT_SYMBOL(ieee80211_rts_duration); |
| |
| |
| __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, |
| size_t frame_len, |
| const struct ieee80211_tx_control *frame_txctl) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct ieee80211_rate *rate; |
| int short_preamble = local->short_preamble; |
| int erp; |
| u16 dur; |
| |
| rate = frame_txctl->rts_rate; |
| erp = !!(rate->flags & IEEE80211_RATE_ERP); |
| |
| /* Data frame duration */ |
| dur = ieee80211_frame_duration(local, frame_len, rate->rate, |
| erp, short_preamble); |
| if (!(frame_txctl->flags & IEEE80211_TXCTL_NO_ACK)) { |
| /* ACK duration */ |
| dur += ieee80211_frame_duration(local, 10, rate->rate, |
| erp, short_preamble); |
| } |
| |
| return cpu_to_le16(dur); |
| } |
| EXPORT_SYMBOL(ieee80211_ctstoself_duration); |
| |
| static int __ieee80211_if_config(struct net_device *dev, |
| struct sk_buff *beacon, |
| struct ieee80211_tx_control *control) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_if_conf conf; |
| static u8 scan_bssid[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; |
| |
| if (!local->ops->config_interface || !netif_running(dev)) |
| return 0; |
| |
| memset(&conf, 0, sizeof(conf)); |
| conf.type = sdata->type; |
| if (sdata->type == IEEE80211_IF_TYPE_STA || |
| sdata->type == IEEE80211_IF_TYPE_IBSS) { |
| if (local->sta_scanning && |
| local->scan_dev == dev) |
| conf.bssid = scan_bssid; |
| else |
| conf.bssid = sdata->u.sta.bssid; |
| conf.ssid = sdata->u.sta.ssid; |
| conf.ssid_len = sdata->u.sta.ssid_len; |
| conf.generic_elem = sdata->u.sta.extra_ie; |
| conf.generic_elem_len = sdata->u.sta.extra_ie_len; |
| } else if (sdata->type == IEEE80211_IF_TYPE_AP) { |
| conf.ssid = sdata->u.ap.ssid; |
| conf.ssid_len = sdata->u.ap.ssid_len; |
| conf.generic_elem = sdata->u.ap.generic_elem; |
| conf.generic_elem_len = sdata->u.ap.generic_elem_len; |
| conf.beacon = beacon; |
| conf.beacon_control = control; |
| } |
| return local->ops->config_interface(local_to_hw(local), |
| dev->ifindex, &conf); |
| } |
| |
| int ieee80211_if_config(struct net_device *dev) |
| { |
| return __ieee80211_if_config(dev, NULL, NULL); |
| } |
| |
| int ieee80211_if_config_beacon(struct net_device *dev) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_tx_control control; |
| struct sk_buff *skb; |
| |
| if (!(local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE)) |
| return 0; |
| skb = ieee80211_beacon_get(local_to_hw(local), dev->ifindex, &control); |
| if (!skb) |
| return -ENOMEM; |
| return __ieee80211_if_config(dev, skb, &control); |
| } |
| |
| int ieee80211_hw_config(struct ieee80211_local *local) |
| { |
| struct ieee80211_hw_mode *mode; |
| struct ieee80211_channel *chan; |
| int ret = 0; |
| |
| if (local->sta_scanning) { |
| chan = local->scan_channel; |
| mode = local->scan_hw_mode; |
| } else { |
| chan = local->oper_channel; |
| mode = local->oper_hw_mode; |
| } |
| |
| local->hw.conf.channel = chan->chan; |
| local->hw.conf.channel_val = chan->val; |
| local->hw.conf.power_level = chan->power_level; |
| local->hw.conf.freq = chan->freq; |
| local->hw.conf.phymode = mode->mode; |
| local->hw.conf.antenna_max = chan->antenna_max; |
| local->hw.conf.chan = chan; |
| local->hw.conf.mode = mode; |
| |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG |
| printk(KERN_DEBUG "HW CONFIG: channel=%d freq=%d " |
| "phymode=%d\n", local->hw.conf.channel, local->hw.conf.freq, |
| local->hw.conf.phymode); |
| #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ |
| |
| if (local->ops->config) |
| ret = local->ops->config(local_to_hw(local), &local->hw.conf); |
| |
| return ret; |
| } |
| |
| |
| static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| /* FIX: what would be proper limits for MTU? |
| * This interface uses 802.3 frames. */ |
| if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6) { |
| printk(KERN_WARNING "%s: invalid MTU %d\n", |
| dev->name, new_mtu); |
| return -EINVAL; |
| } |
| |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG |
| printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu); |
| #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| |
| |
| static int ieee80211_change_mtu_apdev(struct net_device *dev, int new_mtu) |
| { |
| /* FIX: what would be proper limits for MTU? |
| * This interface uses 802.11 frames. */ |
| if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN) { |
| printk(KERN_WARNING "%s: invalid MTU %d\n", |
| dev->name, new_mtu); |
| return -EINVAL; |
| } |
| |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG |
| printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu); |
| #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| |
| enum netif_tx_lock_class { |
| TX_LOCK_NORMAL, |
| TX_LOCK_MASTER, |
| }; |
| |
| static inline void netif_tx_lock_nested(struct net_device *dev, int subclass) |
| { |
| spin_lock_nested(&dev->_xmit_lock, subclass); |
| dev->xmit_lock_owner = smp_processor_id(); |
| } |
| |
| static void ieee80211_set_multicast_list(struct net_device *dev) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| unsigned short flags; |
| |
| netif_tx_lock_nested(local->mdev, TX_LOCK_MASTER); |
| if (((dev->flags & IFF_ALLMULTI) != 0) ^ (sdata->allmulti != 0)) { |
| if (sdata->allmulti) { |
| sdata->allmulti = 0; |
| local->iff_allmultis--; |
| } else { |
| sdata->allmulti = 1; |
| local->iff_allmultis++; |
| } |
| } |
| if (((dev->flags & IFF_PROMISC) != 0) ^ (sdata->promisc != 0)) { |
| if (sdata->promisc) { |
| sdata->promisc = 0; |
| local->iff_promiscs--; |
| } else { |
| sdata->promisc = 1; |
| local->iff_promiscs++; |
| } |
| } |
| if (dev->mc_count != sdata->mc_count) { |
| local->mc_count = local->mc_count - sdata->mc_count + |
| dev->mc_count; |
| sdata->mc_count = dev->mc_count; |
| } |
| if (local->ops->set_multicast_list) { |
| flags = local->mdev->flags; |
| if (local->iff_allmultis) |
| flags |= IFF_ALLMULTI; |
| if (local->iff_promiscs) |
| flags |= IFF_PROMISC; |
| read_lock(&local->sub_if_lock); |
| local->ops->set_multicast_list(local_to_hw(local), flags, |
| local->mc_count); |
| read_unlock(&local->sub_if_lock); |
| } |
| netif_tx_unlock(local->mdev); |
| } |
| |
| struct dev_mc_list *ieee80211_get_mc_list_item(struct ieee80211_hw *hw, |
| struct dev_mc_list *prev, |
| void **ptr) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct ieee80211_sub_if_data *sdata = *ptr; |
| struct dev_mc_list *mc; |
| |
| if (!prev) { |
| WARN_ON(sdata); |
| sdata = NULL; |
| } |
| if (!prev || !prev->next) { |
| if (sdata) |
| sdata = list_entry(sdata->list.next, |
| struct ieee80211_sub_if_data, list); |
| else |
| sdata = list_entry(local->sub_if_list.next, |
| struct ieee80211_sub_if_data, list); |
| if (&sdata->list != &local->sub_if_list) |
| mc = sdata->dev->mc_list; |
| else |
| mc = NULL; |
| } else |
| mc = prev->next; |
| |
| *ptr = sdata; |
| return mc; |
| } |
| EXPORT_SYMBOL(ieee80211_get_mc_list_item); |
| |
| static struct net_device_stats *ieee80211_get_stats(struct net_device *dev) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| return &(sdata->stats); |
| } |
| |
| static void ieee80211_if_shutdown(struct net_device *dev) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| ASSERT_RTNL(); |
| switch (sdata->type) { |
| case IEEE80211_IF_TYPE_STA: |
| case IEEE80211_IF_TYPE_IBSS: |
| sdata->u.sta.state = IEEE80211_DISABLED; |
| del_timer_sync(&sdata->u.sta.timer); |
| skb_queue_purge(&sdata->u.sta.skb_queue); |
| if (!local->ops->hw_scan && |
| local->scan_dev == sdata->dev) { |
| local->sta_scanning = 0; |
| cancel_delayed_work(&local->scan_work); |
| } |
| flush_workqueue(local->hw.workqueue); |
| break; |
| } |
| } |
| |
| static inline int identical_mac_addr_allowed(int type1, int type2) |
| { |
| return (type1 == IEEE80211_IF_TYPE_MNTR || |
| type2 == IEEE80211_IF_TYPE_MNTR || |
| (type1 == IEEE80211_IF_TYPE_AP && |
| type2 == IEEE80211_IF_TYPE_WDS) || |
| (type1 == IEEE80211_IF_TYPE_WDS && |
| (type2 == IEEE80211_IF_TYPE_WDS || |
| type2 == IEEE80211_IF_TYPE_AP)) || |
| (type1 == IEEE80211_IF_TYPE_AP && |
| type2 == IEEE80211_IF_TYPE_VLAN) || |
| (type1 == IEEE80211_IF_TYPE_VLAN && |
| (type2 == IEEE80211_IF_TYPE_AP || |
| type2 == IEEE80211_IF_TYPE_VLAN))); |
| } |
| |
| static int ieee80211_master_open(struct net_device *dev) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_sub_if_data *sdata; |
| int res = -EOPNOTSUPP; |
| |
| read_lock(&local->sub_if_lock); |
| list_for_each_entry(sdata, &local->sub_if_list, list) { |
| if (sdata->dev != dev && netif_running(sdata->dev)) { |
| res = 0; |
| break; |
| } |
| } |
| read_unlock(&local->sub_if_lock); |
| return res; |
| } |
| |
| static int ieee80211_master_stop(struct net_device *dev) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_sub_if_data *sdata; |
| |
| read_lock(&local->sub_if_lock); |
| list_for_each_entry(sdata, &local->sub_if_list, list) |
| if (sdata->dev != dev && netif_running(sdata->dev)) |
| dev_close(sdata->dev); |
| read_unlock(&local->sub_if_lock); |
| |
| return 0; |
| } |
| |
| static int ieee80211_mgmt_open(struct net_device *dev) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| |
| if (!netif_running(local->mdev)) |
| return -EOPNOTSUPP; |
| return 0; |
| } |
| |
| static int ieee80211_mgmt_stop(struct net_device *dev) |
| { |
| return 0; |
| } |
| |
| /* Check if running monitor interfaces should go to a "soft monitor" mode |
| * and switch them if necessary. */ |
| static inline void ieee80211_start_soft_monitor(struct ieee80211_local *local) |
| { |
| struct ieee80211_if_init_conf conf; |
| |
| if (local->open_count && local->open_count == local->monitors && |
| !(local->hw.flags & IEEE80211_HW_MONITOR_DURING_OPER) && |
| local->ops->remove_interface) { |
| conf.if_id = -1; |
| conf.type = IEEE80211_IF_TYPE_MNTR; |
| conf.mac_addr = NULL; |
| local->ops->remove_interface(local_to_hw(local), &conf); |
| } |
| } |
| |
| /* Check if running monitor interfaces should go to a "hard monitor" mode |
| * and switch them if necessary. */ |
| static void ieee80211_start_hard_monitor(struct ieee80211_local *local) |
| { |
| struct ieee80211_if_init_conf conf; |
| |
| if (local->open_count && local->open_count == local->monitors && |
| !(local->hw.flags & IEEE80211_HW_MONITOR_DURING_OPER)) { |
| conf.if_id = -1; |
| conf.type = IEEE80211_IF_TYPE_MNTR; |
| conf.mac_addr = NULL; |
| local->ops->add_interface(local_to_hw(local), &conf); |
| } |
| } |
| |
| static int ieee80211_open(struct net_device *dev) |
| { |
| struct ieee80211_sub_if_data *sdata, *nsdata; |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_if_init_conf conf; |
| int res; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| read_lock(&local->sub_if_lock); |
| list_for_each_entry(nsdata, &local->sub_if_list, list) { |
| struct net_device *ndev = nsdata->dev; |
| |
| if (ndev != dev && ndev != local->mdev && netif_running(ndev) && |
| compare_ether_addr(dev->dev_addr, ndev->dev_addr) == 0 && |
| !identical_mac_addr_allowed(sdata->type, nsdata->type)) { |
| read_unlock(&local->sub_if_lock); |
| return -ENOTUNIQ; |
| } |
| } |
| read_unlock(&local->sub_if_lock); |
| |
| if (sdata->type == IEEE80211_IF_TYPE_WDS && |
| is_zero_ether_addr(sdata->u.wds.remote_addr)) |
| return -ENOLINK; |
| |
| if (sdata->type == IEEE80211_IF_TYPE_MNTR && local->open_count && |
| !(local->hw.flags & IEEE80211_HW_MONITOR_DURING_OPER)) { |
| /* run the interface in a "soft monitor" mode */ |
| local->monitors++; |
| local->open_count++; |
| local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP; |
| return 0; |
| } |
| ieee80211_start_soft_monitor(local); |
| |
| conf.if_id = dev->ifindex; |
| conf.type = sdata->type; |
| conf.mac_addr = dev->dev_addr; |
| res = local->ops->add_interface(local_to_hw(local), &conf); |
| if (res) { |
| if (sdata->type == IEEE80211_IF_TYPE_MNTR) |
| ieee80211_start_hard_monitor(local); |
| return res; |
| } |
| |
| if (local->open_count == 0) { |
| res = 0; |
| tasklet_enable(&local->tx_pending_tasklet); |
| tasklet_enable(&local->tasklet); |
| if (local->ops->open) |
| res = local->ops->open(local_to_hw(local)); |
| if (res == 0) { |
| res = dev_open(local->mdev); |
| if (res) { |
| if (local->ops->stop) |
| local->ops->stop(local_to_hw(local)); |
| } else { |
| res = ieee80211_hw_config(local); |
| if (res && local->ops->stop) |
| local->ops->stop(local_to_hw(local)); |
| else if (!res && local->apdev) |
| dev_open(local->apdev); |
| } |
| } |
| if (res) { |
| if (local->ops->remove_interface) |
| local->ops->remove_interface(local_to_hw(local), |
| &conf); |
| return res; |
| } |
| } |
| local->open_count++; |
| |
| if (sdata->type == IEEE80211_IF_TYPE_MNTR) { |
| local->monitors++; |
| local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP; |
| } else |
| ieee80211_if_config(dev); |
| |
| if (sdata->type == IEEE80211_IF_TYPE_STA && |
| !local->user_space_mlme) |
| netif_carrier_off(dev); |
| else |
| netif_carrier_on(dev); |
| |
| netif_start_queue(dev); |
| return 0; |
| } |
| |
| |
| static int ieee80211_stop(struct net_device *dev) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| if (sdata->type == IEEE80211_IF_TYPE_MNTR && |
| local->open_count > 1 && |
| !(local->hw.flags & IEEE80211_HW_MONITOR_DURING_OPER)) { |
| /* remove "soft monitor" interface */ |
| local->open_count--; |
| local->monitors--; |
| if (!local->monitors) |
| local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP; |
| return 0; |
| } |
| |
| netif_stop_queue(dev); |
| ieee80211_if_shutdown(dev); |
| |
| if (sdata->type == IEEE80211_IF_TYPE_MNTR) { |
| local->monitors--; |
| if (!local->monitors) |
| local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP; |
| } |
| |
| local->open_count--; |
| if (local->open_count == 0) { |
| if (netif_running(local->mdev)) |
| dev_close(local->mdev); |
| if (local->apdev) |
| dev_close(local->apdev); |
| if (local->ops->stop) |
| local->ops->stop(local_to_hw(local)); |
| tasklet_disable(&local->tx_pending_tasklet); |
| tasklet_disable(&local->tasklet); |
| } |
| if (local->ops->remove_interface) { |
| struct ieee80211_if_init_conf conf; |
| |
| conf.if_id = dev->ifindex; |
| conf.type = sdata->type; |
| conf.mac_addr = dev->dev_addr; |
| local->ops->remove_interface(local_to_hw(local), &conf); |
| } |
| |
| ieee80211_start_hard_monitor(local); |
| |
| return 0; |
| } |
| |
| |
| static int header_parse_80211(struct sk_buff *skb, unsigned char *haddr) |
| { |
| memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */ |
| return ETH_ALEN; |
| } |
| |
| struct ieee80211_rate * |
| ieee80211_get_rate(struct ieee80211_local *local, int phymode, int hw_rate) |
| { |
| struct ieee80211_hw_mode *mode; |
| int r; |
| |
| list_for_each_entry(mode, &local->modes_list, list) { |
| if (mode->mode != phymode) |
| continue; |
| for (r = 0; r < mode->num_rates; r++) { |
| struct ieee80211_rate *rate = &mode->rates[r]; |
| if (rate->val == hw_rate || |
| (rate->flags & IEEE80211_RATE_PREAMBLE2 && |
| rate->val2 == hw_rate)) |
| return rate; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static void |
| ieee80211_fill_frame_info(struct ieee80211_local *local, |
| struct ieee80211_frame_info *fi, |
| struct ieee80211_rx_status *status) |
| { |
| if (status) { |
| struct timespec ts; |
| struct ieee80211_rate *rate; |
| |
| jiffies_to_timespec(jiffies, &ts); |
| fi->hosttime = cpu_to_be64((u64) ts.tv_sec * 1000000 + |
| ts.tv_nsec / 1000); |
| fi->mactime = cpu_to_be64(status->mactime); |
| switch (status->phymode) { |
| case MODE_IEEE80211A: |
| fi->phytype = htonl(ieee80211_phytype_ofdm_dot11_a); |
| break; |
| case MODE_IEEE80211B: |
| fi->phytype = htonl(ieee80211_phytype_dsss_dot11_b); |
| break; |
| case MODE_IEEE80211G: |
| fi->phytype = htonl(ieee80211_phytype_pbcc_dot11_g); |
| break; |
| case MODE_ATHEROS_TURBO: |
| fi->phytype = |
| htonl(ieee80211_phytype_dsss_dot11_turbo); |
| break; |
| default: |
| fi->phytype = htonl(0xAAAAAAAA); |
| break; |
| } |
| fi->channel = htonl(status->channel); |
| rate = ieee80211_get_rate(local, status->phymode, |
| status->rate); |
| if (rate) { |
| fi->datarate = htonl(rate->rate); |
| if (rate->flags & IEEE80211_RATE_PREAMBLE2) { |
| if (status->rate == rate->val) |
| fi->preamble = htonl(2); /* long */ |
| else if (status->rate == rate->val2) |
| fi->preamble = htonl(1); /* short */ |
| } else |
| fi->preamble = htonl(0); |
| } else { |
| fi->datarate = htonl(0); |
| fi->preamble = htonl(0); |
| } |
| |
| fi->antenna = htonl(status->antenna); |
| fi->priority = htonl(0xffffffff); /* no clue */ |
| fi->ssi_type = htonl(ieee80211_ssi_raw); |
| fi->ssi_signal = htonl(status->ssi); |
| fi->ssi_noise = 0x00000000; |
| fi->encoding = 0; |
| } else { |
| /* clear everything because we really don't know. |
| * the msg_type field isn't present on monitor frames |
| * so we don't know whether it will be present or not, |
| * but it's ok to not clear it since it'll be assigned |
| * anyway */ |
| memset(fi, 0, sizeof(*fi) - sizeof(fi->msg_type)); |
| |
| fi->ssi_type = htonl(ieee80211_ssi_none); |
| } |
| fi->version = htonl(IEEE80211_FI_VERSION); |
| fi->length = cpu_to_be32(sizeof(*fi) - sizeof(fi->msg_type)); |
| } |
| |
| /* this routine is actually not just for this, but also |
| * for pushing fake 'management' frames into userspace. |
| * it shall be replaced by a netlink-based system. */ |
| void |
| ieee80211_rx_mgmt(struct ieee80211_local *local, struct sk_buff *skb, |
| struct ieee80211_rx_status *status, u32 msg_type) |
| { |
| struct ieee80211_frame_info *fi; |
| const size_t hlen = sizeof(struct ieee80211_frame_info); |
| struct ieee80211_sub_if_data *sdata; |
| |
| skb->dev = local->apdev; |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(local->apdev); |
| |
| if (skb_headroom(skb) < hlen) { |
| I802_DEBUG_INC(local->rx_expand_skb_head); |
| if (pskb_expand_head(skb, hlen, 0, GFP_ATOMIC)) { |
| dev_kfree_skb(skb); |
| return; |
| } |
| } |
| |
| fi = (struct ieee80211_frame_info *) skb_push(skb, hlen); |
| |
| ieee80211_fill_frame_info(local, fi, status); |
| fi->msg_type = htonl(msg_type); |
| |
| sdata->stats.rx_packets++; |
| sdata->stats.rx_bytes += skb->len; |
| |
| skb_set_mac_header(skb, 0); |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| skb->pkt_type = PACKET_OTHERHOST; |
| skb->protocol = htons(ETH_P_802_2); |
| memset(skb->cb, 0, sizeof(skb->cb)); |
| netif_rx(skb); |
| } |
| |
| int ieee80211_radar_status(struct ieee80211_hw *hw, int channel, |
| int radar, int radar_type) |
| { |
| struct sk_buff *skb; |
| struct ieee80211_radar_info *msg; |
| struct ieee80211_local *local = hw_to_local(hw); |
| |
| if (!local->apdev) |
| return 0; |
| |
| skb = dev_alloc_skb(sizeof(struct ieee80211_frame_info) + |
| sizeof(struct ieee80211_radar_info)); |
| |
| if (!skb) |
| return -ENOMEM; |
| skb_reserve(skb, sizeof(struct ieee80211_frame_info)); |
| |
| msg = (struct ieee80211_radar_info *) |
| skb_put(skb, sizeof(struct ieee80211_radar_info)); |
| msg->channel = channel; |
| msg->radar = radar; |
| msg->radar_type = radar_type; |
| |
| ieee80211_rx_mgmt(local, skb, NULL, ieee80211_msg_radar); |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_radar_status); |
| |
| |
| static void ieee80211_stat_refresh(unsigned long data) |
| { |
| struct ieee80211_local *local = (struct ieee80211_local *) data; |
| struct sta_info *sta; |
| struct ieee80211_sub_if_data *sdata; |
| |
| if (!local->stat_time) |
| return; |
| |
| /* go through all stations */ |
| spin_lock_bh(&local->sta_lock); |
| list_for_each_entry(sta, &local->sta_list, list) { |
| sta->channel_use = (sta->channel_use_raw / local->stat_time) / |
| CHAN_UTIL_PER_10MS; |
| sta->channel_use_raw = 0; |
| } |
| spin_unlock_bh(&local->sta_lock); |
| |
| /* go through all subinterfaces */ |
| read_lock(&local->sub_if_lock); |
| list_for_each_entry(sdata, &local->sub_if_list, list) { |
| sdata->channel_use = (sdata->channel_use_raw / |
| local->stat_time) / CHAN_UTIL_PER_10MS; |
| sdata->channel_use_raw = 0; |
| } |
| read_unlock(&local->sub_if_lock); |
| |
| /* hardware interface */ |
| local->channel_use = (local->channel_use_raw / |
| local->stat_time) / CHAN_UTIL_PER_10MS; |
| local->channel_use_raw = 0; |
| |
| local->stat_timer.expires = jiffies + HZ * local->stat_time / 100; |
| add_timer(&local->stat_timer); |
| } |
| |
| |
| void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, |
| struct sk_buff *skb, |
| struct ieee80211_tx_status *status) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct ieee80211_tx_status *saved; |
| int tmp; |
| |
| skb->dev = local->mdev; |
| saved = kmalloc(sizeof(struct ieee80211_tx_status), GFP_ATOMIC); |
| if (unlikely(!saved)) { |
| if (net_ratelimit()) |
| printk(KERN_WARNING "%s: Not enough memory, " |
| "dropping tx status", skb->dev->name); |
| /* should be dev_kfree_skb_irq, but due to this function being |
| * named _irqsafe instead of just _irq we can't be sure that |
| * people won't call it from non-irq contexts */ |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| memcpy(saved, status, sizeof(struct ieee80211_tx_status)); |
| /* copy pointer to saved status into skb->cb for use by tasklet */ |
| memcpy(skb->cb, &saved, sizeof(saved)); |
| |
| skb->pkt_type = IEEE80211_TX_STATUS_MSG; |
| skb_queue_tail(status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS ? |
| &local->skb_queue : &local->skb_queue_unreliable, skb); |
| tmp = skb_queue_len(&local->skb_queue) + |
| skb_queue_len(&local->skb_queue_unreliable); |
| while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT && |
| (skb = skb_dequeue(&local->skb_queue_unreliable))) { |
| memcpy(&saved, skb->cb, sizeof(saved)); |
| kfree(saved); |
| dev_kfree_skb_irq(skb); |
| tmp--; |
| I802_DEBUG_INC(local->tx_status_drop); |
| } |
| tasklet_schedule(&local->tasklet); |
| } |
| EXPORT_SYMBOL(ieee80211_tx_status_irqsafe); |
| |
| static void ieee80211_tasklet_handler(unsigned long data) |
| { |
| struct ieee80211_local *local = (struct ieee80211_local *) data; |
| struct sk_buff *skb; |
| struct ieee80211_rx_status rx_status; |
| struct ieee80211_tx_status *tx_status; |
| |
| while ((skb = skb_dequeue(&local->skb_queue)) || |
| (skb = skb_dequeue(&local->skb_queue_unreliable))) { |
| switch (skb->pkt_type) { |
| case IEEE80211_RX_MSG: |
| /* status is in skb->cb */ |
| memcpy(&rx_status, skb->cb, sizeof(rx_status)); |
| /* Clear skb->type in order to not confuse kernel |
| * netstack. */ |
| skb->pkt_type = 0; |
| __ieee80211_rx(local_to_hw(local), skb, &rx_status); |
| break; |
| case IEEE80211_TX_STATUS_MSG: |
| /* get pointer to saved status out of skb->cb */ |
| memcpy(&tx_status, skb->cb, sizeof(tx_status)); |
| skb->pkt_type = 0; |
| ieee80211_tx_status(local_to_hw(local), |
| skb, tx_status); |
| kfree(tx_status); |
| break; |
| default: /* should never get here! */ |
| printk(KERN_ERR "%s: Unknown message type (%d)\n", |
| local->mdev->name, skb->pkt_type); |
| dev_kfree_skb(skb); |
| break; |
| } |
| } |
| } |
| |
| |
| /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to |
| * make a prepared TX frame (one that has been given to hw) to look like brand |
| * new IEEE 802.11 frame that is ready to go through TX processing again. |
| * Also, tx_packet_data in cb is restored from tx_control. */ |
| static void ieee80211_remove_tx_extra(struct ieee80211_local *local, |
| struct ieee80211_key *key, |
| struct sk_buff *skb, |
| struct ieee80211_tx_control *control) |
| { |
| int hdrlen, iv_len, mic_len; |
| struct ieee80211_tx_packet_data *pkt_data; |
| |
| pkt_data = (struct ieee80211_tx_packet_data *)skb->cb; |
| pkt_data->ifindex = control->ifindex; |
| pkt_data->mgmt_iface = (control->type == IEEE80211_IF_TYPE_MGMT); |
| pkt_data->req_tx_status = !!(control->flags & IEEE80211_TXCTL_REQ_TX_STATUS); |
| pkt_data->do_not_encrypt = !!(control->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT); |
| pkt_data->requeue = !!(control->flags & IEEE80211_TXCTL_REQUEUE); |
| pkt_data->queue = control->queue; |
| |
| hdrlen = ieee80211_get_hdrlen_from_skb(skb); |
| |
| if (!key) |
| goto no_key; |
| |
| switch (key->alg) { |
| case ALG_WEP: |
| iv_len = WEP_IV_LEN; |
| mic_len = WEP_ICV_LEN; |
| break; |
| case ALG_TKIP: |
| iv_len = TKIP_IV_LEN; |
| mic_len = TKIP_ICV_LEN; |
| break; |
| case ALG_CCMP: |
| iv_len = CCMP_HDR_LEN; |
| mic_len = CCMP_MIC_LEN; |
| break; |
| default: |
| goto no_key; |
| } |
| |
| if (skb->len >= mic_len && key->force_sw_encrypt) |
| skb_trim(skb, skb->len - mic_len); |
| if (skb->len >= iv_len && skb->len > hdrlen) { |
| memmove(skb->data + iv_len, skb->data, hdrlen); |
| skb_pull(skb, iv_len); |
| } |
| |
| no_key: |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| u16 fc = le16_to_cpu(hdr->frame_control); |
| if ((fc & 0x8C) == 0x88) /* QoS Control Field */ { |
| fc &= ~IEEE80211_STYPE_QOS_DATA; |
| hdr->frame_control = cpu_to_le16(fc); |
| memmove(skb->data + 2, skb->data, hdrlen - 2); |
| skb_pull(skb, 2); |
| } |
| } |
| } |
| |
| |
| void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, |
| struct ieee80211_tx_status *status) |
| { |
| struct sk_buff *skb2; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| struct ieee80211_local *local = hw_to_local(hw); |
| u16 frag, type; |
| u32 msg_type; |
| struct ieee80211_tx_status_rtap_hdr *rthdr; |
| struct ieee80211_sub_if_data *sdata; |
| int monitors; |
| |
| if (!status) { |
| printk(KERN_ERR |
| "%s: ieee80211_tx_status called with NULL status\n", |
| local->mdev->name); |
| dev_kfree_skb(skb); |
| return; |
| } |
| |
| if (status->excessive_retries) { |
| struct sta_info *sta; |
| sta = sta_info_get(local, hdr->addr1); |
| if (sta) { |
| if (sta->flags & WLAN_STA_PS) { |
| /* The STA is in power save mode, so assume |
| * that this TX packet failed because of that. |
| */ |
| status->excessive_retries = 0; |
| status->flags |= IEEE80211_TX_STATUS_TX_FILTERED; |
| } |
| sta_info_put(sta); |
| } |
| } |
| |
| if (status->flags & IEEE80211_TX_STATUS_TX_FILTERED) { |
| struct sta_info *sta; |
| sta = sta_info_get(local, hdr->addr1); |
| if (sta) { |
| sta->tx_filtered_count++; |
| |
| /* Clear the TX filter mask for this STA when sending |
| * the next packet. If the STA went to power save mode, |
| * this will happen when it is waking up for the next |
| * time. */ |
| sta->clear_dst_mask = 1; |
| |
| /* TODO: Is the WLAN_STA_PS flag always set here or is |
| * the race between RX and TX status causing some |
| * packets to be filtered out before 80211.o gets an |
| * update for PS status? This seems to be the case, so |
| * no changes are likely to be needed. */ |
| if (sta->flags & WLAN_STA_PS && |
| skb_queue_len(&sta->tx_filtered) < |
| STA_MAX_TX_BUFFER) { |
| ieee80211_remove_tx_extra(local, sta->key, |
| skb, |
| &status->control); |
| skb_queue_tail(&sta->tx_filtered, skb); |
| } else if (!(sta->flags & WLAN_STA_PS) && |
| !(status->control.flags & IEEE80211_TXCTL_REQUEUE)) { |
| /* Software retry the packet once */ |
| status->control.flags |= IEEE80211_TXCTL_REQUEUE; |
| ieee80211_remove_tx_extra(local, sta->key, |
| skb, |
| &status->control); |
| dev_queue_xmit(skb); |
| } else { |
| if (net_ratelimit()) { |
| printk(KERN_DEBUG "%s: dropped TX " |
| "filtered frame queue_len=%d " |
| "PS=%d @%lu\n", |
| local->mdev->name, |
| skb_queue_len( |
| &sta->tx_filtered), |
| !!(sta->flags & WLAN_STA_PS), |
| jiffies); |
| } |
| dev_kfree_skb(skb); |
| } |
| sta_info_put(sta); |
| return; |
| } |
| } else { |
| /* FIXME: STUPID to call this with both local and local->mdev */ |
| rate_control_tx_status(local, local->mdev, skb, status); |
| } |
| |
| ieee80211_led_tx(local, 0); |
| |
| /* SNMP counters |
| * Fragments are passed to low-level drivers as separate skbs, so these |
| * are actually fragments, not frames. Update frame counters only for |
| * the first fragment of the frame. */ |
| |
| frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG; |
| type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE; |
| |
| if (status->flags & IEEE80211_TX_STATUS_ACK) { |
| if (frag == 0) { |
| local->dot11TransmittedFrameCount++; |
| if (is_multicast_ether_addr(hdr->addr1)) |
| local->dot11MulticastTransmittedFrameCount++; |
| if (status->retry_count > 0) |
| local->dot11RetryCount++; |
| if (status->retry_count > 1) |
| local->dot11MultipleRetryCount++; |
| } |
| |
| /* This counter shall be incremented for an acknowledged MPDU |
| * with an individual address in the address 1 field or an MPDU |
| * with a multicast address in the address 1 field of type Data |
| * or Management. */ |
| if (!is_multicast_ether_addr(hdr->addr1) || |
| type == IEEE80211_FTYPE_DATA || |
| type == IEEE80211_FTYPE_MGMT) |
| local->dot11TransmittedFragmentCount++; |
| } else { |
| if (frag == 0) |
| local->dot11FailedCount++; |
| } |
| |
| msg_type = (status->flags & IEEE80211_TX_STATUS_ACK) ? |
| ieee80211_msg_tx_callback_ack : ieee80211_msg_tx_callback_fail; |
| |
| /* this was a transmitted frame, but now we want to reuse it */ |
| skb_orphan(skb); |
| |
| if ((status->control.flags & IEEE80211_TXCTL_REQ_TX_STATUS) && |
| local->apdev) { |
| if (local->monitors) { |
| skb2 = skb_clone(skb, GFP_ATOMIC); |
| } else { |
| skb2 = skb; |
| skb = NULL; |
| } |
| |
| if (skb2) |
| /* Send frame to hostapd */ |
| ieee80211_rx_mgmt(local, skb2, NULL, msg_type); |
| |
| if (!skb) |
| return; |
| } |
| |
| if (!local->monitors) { |
| dev_kfree_skb(skb); |
| return; |
| } |
| |
| /* send frame to monitor interfaces now */ |
| |
| if (skb_headroom(skb) < sizeof(*rthdr)) { |
| printk(KERN_ERR "ieee80211_tx_status: headroom too small\n"); |
| dev_kfree_skb(skb); |
| return; |
| } |
| |
| rthdr = (struct ieee80211_tx_status_rtap_hdr*) |
| skb_push(skb, sizeof(*rthdr)); |
| |
| memset(rthdr, 0, sizeof(*rthdr)); |
| rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr)); |
| rthdr->hdr.it_present = |
| cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) | |
| (1 << IEEE80211_RADIOTAP_DATA_RETRIES)); |
| |
| if (!(status->flags & IEEE80211_TX_STATUS_ACK) && |
| !is_multicast_ether_addr(hdr->addr1)) |
| rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL); |
| |
| if ((status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) && |
| (status->control.flags & IEEE80211_TXCTL_USE_CTS_PROTECT)) |
| rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS); |
| else if (status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) |
| rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS); |
| |
| rthdr->data_retries = status->retry_count; |
| |
| read_lock(&local->sub_if_lock); |
| monitors = local->monitors; |
| list_for_each_entry(sdata, &local->sub_if_list, list) { |
| /* |
| * Using the monitors counter is possibly racy, but |
| * if the value is wrong we simply either clone the skb |
| * once too much or forget sending it to one monitor iface |
| * The latter case isn't nice but fixing the race is much |
| * more complicated. |
| */ |
| if (!monitors || !skb) |
| goto out; |
| |
| if (sdata->type == IEEE80211_IF_TYPE_MNTR) { |
| if (!netif_running(sdata->dev)) |
| continue; |
| monitors--; |
| if (monitors) |
| skb2 = skb_clone(skb, GFP_KERNEL); |
| else |
| skb2 = NULL; |
| skb->dev = sdata->dev; |
| /* XXX: is this sufficient for BPF? */ |
| skb_set_mac_header(skb, 0); |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| skb->pkt_type = PACKET_OTHERHOST; |
| skb->protocol = htons(ETH_P_802_2); |
| memset(skb->cb, 0, sizeof(skb->cb)); |
| netif_rx(skb); |
| skb = skb2; |
| } |
| } |
| out: |
| read_unlock(&local->sub_if_lock); |
| if (skb) |
| dev_kfree_skb(skb); |
| } |
| EXPORT_SYMBOL(ieee80211_tx_status); |
| |
| |
| int ieee80211_if_update_wds(struct net_device *dev, u8 *remote_addr) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| struct sta_info *sta; |
| |
| if (compare_ether_addr(remote_addr, sdata->u.wds.remote_addr) == 0) |
| return 0; |
| |
| /* Create STA entry for the new peer */ |
| sta = sta_info_add(local, dev, remote_addr, GFP_KERNEL); |
| if (!sta) |
| return -ENOMEM; |
| sta_info_put(sta); |
| |
| /* Remove STA entry for the old peer */ |
| sta = sta_info_get(local, sdata->u.wds.remote_addr); |
| if (sta) { |
| sta_info_put(sta); |
| sta_info_free(sta, 0); |
| } else { |
| printk(KERN_DEBUG "%s: could not find STA entry for WDS link " |
| "peer " MAC_FMT "\n", |
| dev->name, MAC_ARG(sdata->u.wds.remote_addr)); |
| } |
| |
| /* Update WDS link data */ |
| memcpy(&sdata->u.wds.remote_addr, remote_addr, ETH_ALEN); |
| |
| return 0; |
| } |
| |
| /* Must not be called for mdev and apdev */ |
| void ieee80211_if_setup(struct net_device *dev) |
| { |
| ether_setup(dev); |
| dev->hard_start_xmit = ieee80211_subif_start_xmit; |
| dev->wireless_handlers = &ieee80211_iw_handler_def; |
| dev->set_multicast_list = ieee80211_set_multicast_list; |
| dev->change_mtu = ieee80211_change_mtu; |
| dev->get_stats = ieee80211_get_stats; |
| dev->open = ieee80211_open; |
| dev->stop = ieee80211_stop; |
| dev->uninit = ieee80211_if_reinit; |
| dev->destructor = ieee80211_if_free; |
| } |
| |
| void ieee80211_if_mgmt_setup(struct net_device *dev) |
| { |
| ether_setup(dev); |
| dev->hard_start_xmit = ieee80211_mgmt_start_xmit; |
| dev->change_mtu = ieee80211_change_mtu_apdev; |
| dev->get_stats = ieee80211_get_stats; |
| dev->open = ieee80211_mgmt_open; |
| dev->stop = ieee80211_mgmt_stop; |
| dev->type = ARPHRD_IEEE80211_PRISM; |
| dev->hard_header_parse = header_parse_80211; |
| dev->uninit = ieee80211_if_reinit; |
| dev->destructor = ieee80211_if_free; |
| } |
| |
| int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local, |
| const char *name) |
| { |
| struct rate_control_ref *ref, *old; |
| |
| ASSERT_RTNL(); |
| if (local->open_count || netif_running(local->mdev) || |
| (local->apdev && netif_running(local->apdev))) |
| return -EBUSY; |
| |
| ref = rate_control_alloc(name, local); |
| if (!ref) { |
| printk(KERN_WARNING "%s: Failed to select rate control " |
| "algorithm\n", local->mdev->name); |
| return -ENOENT; |
| } |
| |
| old = local->rate_ctrl; |
| local->rate_ctrl = ref; |
| if (old) { |
| rate_control_put(old); |
| sta_info_flush(local, NULL); |
| } |
| |
| printk(KERN_DEBUG "%s: Selected rate control " |
| "algorithm '%s'\n", local->mdev->name, |
| ref->ops->name); |
| |
| |
| return 0; |
| } |
| |
| static void rate_control_deinitialize(struct ieee80211_local *local) |
| { |
| struct rate_control_ref *ref; |
| |
| ref = local->rate_ctrl; |
| local->rate_ctrl = NULL; |
| rate_control_put(ref); |
| } |
| |
| struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, |
| const struct ieee80211_ops *ops) |
| { |
| struct net_device *mdev; |
| struct ieee80211_local *local; |
| struct ieee80211_sub_if_data *sdata; |
| int priv_size; |
| struct wiphy *wiphy; |
| |
| /* Ensure 32-byte alignment of our private data and hw private data. |
| * We use the wiphy priv data for both our ieee80211_local and for |
| * the driver's private data |
| * |
| * In memory it'll be like this: |
| * |
| * +-------------------------+ |
| * | struct wiphy | |
| * +-------------------------+ |
| * | struct ieee80211_local | |
| * +-------------------------+ |
| * | driver's private data | |
| * +-------------------------+ |
| * |
| */ |
| priv_size = ((sizeof(struct ieee80211_local) + |
| NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) + |
| priv_data_len; |
| |
| wiphy = wiphy_new(&mac80211_config_ops, priv_size); |
| |
| if (!wiphy) |
| return NULL; |
| |
| wiphy->privid = mac80211_wiphy_privid; |
| |
| local = wiphy_priv(wiphy); |
| local->hw.wiphy = wiphy; |
| |
| local->hw.priv = (char *)local + |
| ((sizeof(struct ieee80211_local) + |
| NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST); |
| |
| BUG_ON(!ops->tx); |
| BUG_ON(!ops->config); |
| BUG_ON(!ops->add_interface); |
| local->ops = ops; |
| |
| /* for now, mdev needs sub_if_data :/ */ |
| mdev = alloc_netdev(sizeof(struct ieee80211_sub_if_data), |
| "wmaster%d", ether_setup); |
| if (!mdev) { |
| wiphy_free(wiphy); |
| return NULL; |
| } |
| |
| sdata = IEEE80211_DEV_TO_SUB_IF(mdev); |
| mdev->ieee80211_ptr = &sdata->wdev; |
| sdata->wdev.wiphy = wiphy; |
| |
| local->hw.queues = 1; /* default */ |
| |
| local->mdev = mdev; |
| local->rx_pre_handlers = ieee80211_rx_pre_handlers; |
| local->rx_handlers = ieee80211_rx_handlers; |
| local->tx_handlers = ieee80211_tx_handlers; |
| |
| local->bridge_packets = 1; |
| |
| local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD; |
| local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD; |
| local->short_retry_limit = 7; |
| local->long_retry_limit = 4; |
| local->hw.conf.radio_enabled = 1; |
| |
| local->enabled_modes = (unsigned int) -1; |
| |
| INIT_LIST_HEAD(&local->modes_list); |
| |
| rwlock_init(&local->sub_if_lock); |
| INIT_LIST_HEAD(&local->sub_if_list); |
| |
| INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work); |
| init_timer(&local->stat_timer); |
| local->stat_timer.function = ieee80211_stat_refresh; |
| local->stat_timer.data = (unsigned long) local; |
| ieee80211_rx_bss_list_init(mdev); |
| |
| sta_info_init(local); |
| |
| mdev->hard_start_xmit = ieee80211_master_start_xmit; |
| mdev->open = ieee80211_master_open; |
| mdev->stop = ieee80211_master_stop; |
| mdev->type = ARPHRD_IEEE80211; |
| mdev->hard_header_parse = header_parse_80211; |
| |
| sdata->type = IEEE80211_IF_TYPE_AP; |
| sdata->dev = mdev; |
| sdata->local = local; |
| sdata->u.ap.force_unicast_rateidx = -1; |
| sdata->u.ap.max_ratectrl_rateidx = -1; |
| ieee80211_if_sdata_init(sdata); |
| list_add_tail(&sdata->list, &local->sub_if_list); |
| |
| tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending, |
| (unsigned long)local); |
| tasklet_disable(&local->tx_pending_tasklet); |
| |
| tasklet_init(&local->tasklet, |
| ieee80211_tasklet_handler, |
| (unsigned long) local); |
| tasklet_disable(&local->tasklet); |
| |
| skb_queue_head_init(&local->skb_queue); |
| skb_queue_head_init(&local->skb_queue_unreliable); |
| |
| return local_to_hw(local); |
| } |
| EXPORT_SYMBOL(ieee80211_alloc_hw); |
| |
| int ieee80211_register_hw(struct ieee80211_hw *hw) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| const char *name; |
| int result; |
| |
| result = wiphy_register(local->hw.wiphy); |
| if (result < 0) |
| return result; |
| |
| name = wiphy_dev(local->hw.wiphy)->driver->name; |
| local->hw.workqueue = create_singlethread_workqueue(name); |
| if (!local->hw.workqueue) { |
| result = -ENOMEM; |
| goto fail_workqueue; |
| } |
| |
| /* |
| * The hardware needs headroom for sending the frame, |
| * and we need some headroom for passing the frame to monitor |
| * interfaces, but never both at the same time. |
| */ |
| local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, |
| sizeof(struct ieee80211_tx_status_rtap_hdr)); |
| |
| debugfs_hw_add(local); |
| |
| local->hw.conf.beacon_int = 1000; |
| |
| local->wstats_flags |= local->hw.max_rssi ? |
| IW_QUAL_LEVEL_UPDATED : IW_QUAL_LEVEL_INVALID; |
| local->wstats_flags |= local->hw.max_signal ? |
| IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID; |
| local->wstats_flags |= local->hw.max_noise ? |
| IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID; |
| if (local->hw.max_rssi < 0 || local->hw.max_noise < 0) |
| local->wstats_flags |= IW_QUAL_DBM; |
| |
| result = sta_info_start(local); |
| if (result < 0) |
| goto fail_sta_info; |
| |
| rtnl_lock(); |
| result = dev_alloc_name(local->mdev, local->mdev->name); |
| if (result < 0) |
| goto fail_dev; |
| |
| memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN); |
| SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy)); |
| |
| result = register_netdevice(local->mdev); |
| if (result < 0) |
| goto fail_dev; |
| |
| ieee80211_debugfs_add_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev)); |
| |
| result = ieee80211_init_rate_ctrl_alg(local, NULL); |
| if (result < 0) { |
| printk(KERN_DEBUG "%s: Failed to initialize rate control " |
| "algorithm\n", local->mdev->name); |
| goto fail_rate; |
| } |
| |
| result = ieee80211_wep_init(local); |
| |
| if (result < 0) { |
| printk(KERN_DEBUG "%s: Failed to initialize wep\n", |
| local->mdev->name); |
| goto fail_wep; |
| } |
| |
| ieee80211_install_qdisc(local->mdev); |
| |
| /* add one default STA interface */ |
| result = ieee80211_if_add(local->mdev, "wlan%d", NULL, |
| IEEE80211_IF_TYPE_STA); |
| if (result) |
| printk(KERN_WARNING "%s: Failed to add default virtual iface\n", |
| local->mdev->name); |
| |
| local->reg_state = IEEE80211_DEV_REGISTERED; |
| rtnl_unlock(); |
| |
| ieee80211_led_init(local); |
| |
| return 0; |
| |
| fail_wep: |
| rate_control_deinitialize(local); |
| fail_rate: |
| ieee80211_debugfs_remove_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev)); |
| unregister_netdevice(local->mdev); |
| fail_dev: |
| rtnl_unlock(); |
| sta_info_stop(local); |
| fail_sta_info: |
| debugfs_hw_del(local); |
| destroy_workqueue(local->hw.workqueue); |
| fail_workqueue: |
| wiphy_unregister(local->hw.wiphy); |
| return result; |
| } |
| EXPORT_SYMBOL(ieee80211_register_hw); |
| |
| int ieee80211_register_hwmode(struct ieee80211_hw *hw, |
| struct ieee80211_hw_mode *mode) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct ieee80211_rate *rate; |
| int i; |
| |
| INIT_LIST_HEAD(&mode->list); |
| list_add_tail(&mode->list, &local->modes_list); |
| |
| local->hw_modes |= (1 << mode->mode); |
| for (i = 0; i < mode->num_rates; i++) { |
| rate = &(mode->rates[i]); |
| rate->rate_inv = CHAN_UTIL_RATE_LCM / rate->rate; |
| } |
| ieee80211_prepare_rates(local, mode); |
| |
| if (!local->oper_hw_mode) { |
| /* Default to this mode */ |
| local->hw.conf.phymode = mode->mode; |
| local->oper_hw_mode = local->scan_hw_mode = mode; |
| local->oper_channel = local->scan_channel = &mode->channels[0]; |
| local->hw.conf.mode = local->oper_hw_mode; |
| local->hw.conf.chan = local->oper_channel; |
| } |
| |
| if (!(hw->flags & IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED)) |
| ieee80211_set_default_regdomain(mode); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_register_hwmode); |
| |
| void ieee80211_unregister_hw(struct ieee80211_hw *hw) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct ieee80211_sub_if_data *sdata, *tmp; |
| struct list_head tmp_list; |
| int i; |
| |
| tasklet_kill(&local->tx_pending_tasklet); |
| tasklet_kill(&local->tasklet); |
| |
| rtnl_lock(); |
| |
| BUG_ON(local->reg_state != IEEE80211_DEV_REGISTERED); |
| |
| local->reg_state = IEEE80211_DEV_UNREGISTERED; |
| if (local->apdev) |
| ieee80211_if_del_mgmt(local); |
| |
| write_lock_bh(&local->sub_if_lock); |
| list_replace_init(&local->sub_if_list, &tmp_list); |
| write_unlock_bh(&local->sub_if_lock); |
| |
| list_for_each_entry_safe(sdata, tmp, &tmp_list, list) |
| __ieee80211_if_del(local, sdata); |
| |
| rtnl_unlock(); |
| |
| if (local->stat_time) |
| del_timer_sync(&local->stat_timer); |
| |
| ieee80211_rx_bss_list_deinit(local->mdev); |
| ieee80211_clear_tx_pending(local); |
| sta_info_stop(local); |
| rate_control_deinitialize(local); |
| debugfs_hw_del(local); |
| |
| for (i = 0; i < NUM_IEEE80211_MODES; i++) { |
| kfree(local->supp_rates[i]); |
| kfree(local->basic_rates[i]); |
| } |
| |
| if (skb_queue_len(&local->skb_queue) |
| || skb_queue_len(&local->skb_queue_unreliable)) |
| printk(KERN_WARNING "%s: skb_queue not empty\n", |
| local->mdev->name); |
| skb_queue_purge(&local->skb_queue); |
| skb_queue_purge(&local->skb_queue_unreliable); |
| |
| destroy_workqueue(local->hw.workqueue); |
| wiphy_unregister(local->hw.wiphy); |
| ieee80211_wep_free(local); |
| ieee80211_led_exit(local); |
| } |
| EXPORT_SYMBOL(ieee80211_unregister_hw); |
| |
| void ieee80211_free_hw(struct ieee80211_hw *hw) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| |
| ieee80211_if_free(local->mdev); |
| wiphy_free(local->hw.wiphy); |
| } |
| EXPORT_SYMBOL(ieee80211_free_hw); |
| |
| void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| |
| if (test_and_clear_bit(IEEE80211_LINK_STATE_XOFF, |
| &local->state[queue])) { |
| if (test_bit(IEEE80211_LINK_STATE_PENDING, |
| &local->state[queue])) |
| tasklet_schedule(&local->tx_pending_tasklet); |
| else |
| if (!ieee80211_qdisc_installed(local->mdev)) { |
| if (queue == 0) |
| netif_wake_queue(local->mdev); |
| } else |
| __netif_schedule(local->mdev); |
| } |
| } |
| EXPORT_SYMBOL(ieee80211_wake_queue); |
| |
| void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| |
| if (!ieee80211_qdisc_installed(local->mdev) && queue == 0) |
| netif_stop_queue(local->mdev); |
| set_bit(IEEE80211_LINK_STATE_XOFF, &local->state[queue]); |
| } |
| EXPORT_SYMBOL(ieee80211_stop_queue); |
| |
| void ieee80211_start_queues(struct ieee80211_hw *hw) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| int i; |
| |
| for (i = 0; i < local->hw.queues; i++) |
| clear_bit(IEEE80211_LINK_STATE_XOFF, &local->state[i]); |
| if (!ieee80211_qdisc_installed(local->mdev)) |
| netif_start_queue(local->mdev); |
| } |
| EXPORT_SYMBOL(ieee80211_start_queues); |
| |
| void ieee80211_stop_queues(struct ieee80211_hw *hw) |
| { |
| int i; |
| |
| for (i = 0; i < hw->queues; i++) |
| ieee80211_stop_queue(hw, i); |
| } |
| EXPORT_SYMBOL(ieee80211_stop_queues); |
| |
| void ieee80211_wake_queues(struct ieee80211_hw *hw) |
| { |
| int i; |
| |
| for (i = 0; i < hw->queues; i++) |
| ieee80211_wake_queue(hw, i); |
| } |
| EXPORT_SYMBOL(ieee80211_wake_queues); |
| |
| struct net_device_stats *ieee80211_dev_stats(struct net_device *dev) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| return &sdata->stats; |
| } |
| |
| static int __init ieee80211_init(void) |
| { |
| struct sk_buff *skb; |
| int ret; |
| |
| BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb)); |
| |
| ret = ieee80211_wme_register(); |
| if (ret) { |
| printk(KERN_DEBUG "ieee80211_init: failed to " |
| "initialize WME (err=%d)\n", ret); |
| return ret; |
| } |
| |
| ieee80211_debugfs_netdev_init(); |
| ieee80211_regdomain_init(); |
| |
| return 0; |
| } |
| |
| |
| static void __exit ieee80211_exit(void) |
| { |
| ieee80211_wme_unregister(); |
| ieee80211_debugfs_netdev_exit(); |
| } |
| |
| |
| subsys_initcall(ieee80211_init); |
| module_exit(ieee80211_exit); |
| |
| MODULE_DESCRIPTION("IEEE 802.11 subsystem"); |
| MODULE_LICENSE("GPL"); |