| /* |
| * Amlogic SD/eMMC driver for the GX/S905 family SoCs |
| * |
| * Copyright (c) 2016 BayLibre, SAS. |
| * Author: Kevin Hilman <khilman@baylibre.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/ioport.h> |
| #include <linux/spinlock.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/slot-gpio.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/interrupt.h> |
| #include <linux/bitfield.h> |
| |
| #define DRIVER_NAME "meson-gx-mmc" |
| |
| #define SD_EMMC_CLOCK 0x0 |
| #define CLK_DIV_MASK GENMASK(5, 0) |
| #define CLK_DIV_MAX 63 |
| #define CLK_SRC_MASK GENMASK(7, 6) |
| #define CLK_SRC_XTAL 0 /* external crystal */ |
| #define CLK_SRC_XTAL_RATE 24000000 |
| #define CLK_SRC_PLL 1 /* FCLK_DIV2 */ |
| #define CLK_SRC_PLL_RATE 1000000000 |
| #define CLK_CORE_PHASE_MASK GENMASK(9, 8) |
| #define CLK_PHASE_0 0 |
| #define CLK_PHASE_90 1 |
| #define CLK_PHASE_180 2 |
| #define CLK_PHASE_270 3 |
| #define CLK_ALWAYS_ON BIT(24) |
| |
| #define SD_EMMC_DElAY 0x4 |
| #define SD_EMMC_ADJUST 0x8 |
| #define SD_EMMC_CALOUT 0x10 |
| #define SD_EMMC_START 0x40 |
| #define START_DESC_INIT BIT(0) |
| #define START_DESC_BUSY BIT(1) |
| #define START_DESC_ADDR_MASK GENMASK(31, 2) |
| |
| #define SD_EMMC_CFG 0x44 |
| #define CFG_BUS_WIDTH_MASK GENMASK(1, 0) |
| #define CFG_BUS_WIDTH_1 0x0 |
| #define CFG_BUS_WIDTH_4 0x1 |
| #define CFG_BUS_WIDTH_8 0x2 |
| #define CFG_DDR BIT(2) |
| #define CFG_BLK_LEN_MASK GENMASK(7, 4) |
| #define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8) |
| #define CFG_RC_CC_MASK GENMASK(15, 12) |
| #define CFG_STOP_CLOCK BIT(22) |
| #define CFG_CLK_ALWAYS_ON BIT(18) |
| #define CFG_CHK_DS BIT(20) |
| #define CFG_AUTO_CLK BIT(23) |
| |
| #define SD_EMMC_STATUS 0x48 |
| #define STATUS_BUSY BIT(31) |
| |
| #define SD_EMMC_IRQ_EN 0x4c |
| #define IRQ_EN_MASK GENMASK(13, 0) |
| #define IRQ_RXD_ERR_MASK GENMASK(7, 0) |
| #define IRQ_TXD_ERR BIT(8) |
| #define IRQ_DESC_ERR BIT(9) |
| #define IRQ_RESP_ERR BIT(10) |
| #define IRQ_RESP_TIMEOUT BIT(11) |
| #define IRQ_DESC_TIMEOUT BIT(12) |
| #define IRQ_END_OF_CHAIN BIT(13) |
| #define IRQ_RESP_STATUS BIT(14) |
| #define IRQ_SDIO BIT(15) |
| |
| #define SD_EMMC_CMD_CFG 0x50 |
| #define SD_EMMC_CMD_ARG 0x54 |
| #define SD_EMMC_CMD_DAT 0x58 |
| #define SD_EMMC_CMD_RSP 0x5c |
| #define SD_EMMC_CMD_RSP1 0x60 |
| #define SD_EMMC_CMD_RSP2 0x64 |
| #define SD_EMMC_CMD_RSP3 0x68 |
| |
| #define SD_EMMC_RXD 0x94 |
| #define SD_EMMC_TXD 0x94 |
| #define SD_EMMC_LAST_REG SD_EMMC_TXD |
| |
| #define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */ |
| #define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */ |
| #define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */ |
| #define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */ |
| #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ |
| #define MUX_CLK_NUM_PARENTS 2 |
| |
| struct meson_host { |
| struct device *dev; |
| struct mmc_host *mmc; |
| struct mmc_command *cmd; |
| |
| spinlock_t lock; |
| void __iomem *regs; |
| struct clk *core_clk; |
| struct clk_mux mux; |
| struct clk *mux_clk; |
| unsigned long current_clock; |
| |
| struct clk_divider cfg_div; |
| struct clk *cfg_div_clk; |
| |
| unsigned int bounce_buf_size; |
| void *bounce_buf; |
| dma_addr_t bounce_dma_addr; |
| |
| bool vqmmc_enabled; |
| }; |
| |
| struct sd_emmc_desc { |
| u32 cmd_cfg; |
| u32 cmd_arg; |
| u32 cmd_data; |
| u32 cmd_resp; |
| }; |
| |
| #define CMD_CFG_LENGTH_MASK GENMASK(8, 0) |
| #define CMD_CFG_BLOCK_MODE BIT(9) |
| #define CMD_CFG_R1B BIT(10) |
| #define CMD_CFG_END_OF_CHAIN BIT(11) |
| #define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12) |
| #define CMD_CFG_NO_RESP BIT(16) |
| #define CMD_CFG_NO_CMD BIT(17) |
| #define CMD_CFG_DATA_IO BIT(18) |
| #define CMD_CFG_DATA_WR BIT(19) |
| #define CMD_CFG_RESP_NOCRC BIT(20) |
| #define CMD_CFG_RESP_128 BIT(21) |
| #define CMD_CFG_RESP_NUM BIT(22) |
| #define CMD_CFG_DATA_NUM BIT(23) |
| #define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24) |
| #define CMD_CFG_ERROR BIT(30) |
| #define CMD_CFG_OWNER BIT(31) |
| |
| #define CMD_DATA_MASK GENMASK(31, 2) |
| #define CMD_DATA_BIG_ENDIAN BIT(1) |
| #define CMD_DATA_SRAM BIT(0) |
| #define CMD_RESP_MASK GENMASK(31, 1) |
| #define CMD_RESP_SRAM BIT(0) |
| |
| static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data) |
| { |
| unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC; |
| |
| if (!timeout) |
| return SD_EMMC_CMD_TIMEOUT_DATA; |
| |
| timeout = roundup_pow_of_two(timeout); |
| |
| return min(timeout, 32768U); /* max. 2^15 ms */ |
| } |
| |
| static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) |
| { |
| if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error) |
| return cmd->mrq->cmd; |
| else if (mmc_op_multi(cmd->opcode) && |
| (!cmd->mrq->sbc || cmd->error || cmd->data->error)) |
| return cmd->mrq->stop; |
| else |
| return NULL; |
| } |
| |
| static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate) |
| { |
| struct mmc_host *mmc = host->mmc; |
| int ret; |
| u32 cfg; |
| |
| if (clk_rate) { |
| if (WARN_ON(clk_rate > mmc->f_max)) |
| clk_rate = mmc->f_max; |
| else if (WARN_ON(clk_rate < mmc->f_min)) |
| clk_rate = mmc->f_min; |
| } |
| |
| if (clk_rate == host->current_clock) |
| return 0; |
| |
| /* stop clock */ |
| cfg = readl(host->regs + SD_EMMC_CFG); |
| if (!(cfg & CFG_STOP_CLOCK)) { |
| cfg |= CFG_STOP_CLOCK; |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| } |
| |
| dev_dbg(host->dev, "change clock rate %u -> %lu\n", |
| mmc->actual_clock, clk_rate); |
| |
| if (!clk_rate) { |
| mmc->actual_clock = 0; |
| host->current_clock = 0; |
| /* return with clock being stopped */ |
| return 0; |
| } |
| |
| ret = clk_set_rate(host->cfg_div_clk, clk_rate); |
| if (ret) { |
| dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n", |
| clk_rate, ret); |
| return ret; |
| } |
| |
| mmc->actual_clock = clk_get_rate(host->cfg_div_clk); |
| host->current_clock = clk_rate; |
| |
| if (clk_rate != mmc->actual_clock) |
| dev_dbg(host->dev, |
| "divider requested rate %lu != actual rate %u\n", |
| clk_rate, mmc->actual_clock); |
| |
| /* (re)start clock */ |
| cfg = readl(host->regs + SD_EMMC_CFG); |
| cfg &= ~CFG_STOP_CLOCK; |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| |
| return 0; |
| } |
| |
| /* |
| * The SD/eMMC IP block has an internal mux and divider used for |
| * generating the MMC clock. Use the clock framework to create and |
| * manage these clocks. |
| */ |
| static int meson_mmc_clk_init(struct meson_host *host) |
| { |
| struct clk_init_data init; |
| char clk_name[32]; |
| int i, ret = 0; |
| const char *mux_parent_names[MUX_CLK_NUM_PARENTS]; |
| const char *clk_div_parents[1]; |
| u32 clk_reg, cfg; |
| |
| /* get the mux parents */ |
| for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) { |
| struct clk *clk; |
| char name[16]; |
| |
| snprintf(name, sizeof(name), "clkin%d", i); |
| clk = devm_clk_get(host->dev, name); |
| if (IS_ERR(clk)) { |
| if (clk != ERR_PTR(-EPROBE_DEFER)) |
| dev_err(host->dev, "Missing clock %s\n", name); |
| return PTR_ERR(clk); |
| } |
| |
| mux_parent_names[i] = __clk_get_name(clk); |
| } |
| |
| /* create the mux */ |
| snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev)); |
| init.name = clk_name; |
| init.ops = &clk_mux_ops; |
| init.flags = 0; |
| init.parent_names = mux_parent_names; |
| init.num_parents = MUX_CLK_NUM_PARENTS; |
| host->mux.reg = host->regs + SD_EMMC_CLOCK; |
| host->mux.shift = __bf_shf(CLK_SRC_MASK); |
| host->mux.mask = CLK_SRC_MASK; |
| host->mux.flags = 0; |
| host->mux.table = NULL; |
| host->mux.hw.init = &init; |
| |
| host->mux_clk = devm_clk_register(host->dev, &host->mux.hw); |
| if (WARN_ON(IS_ERR(host->mux_clk))) |
| return PTR_ERR(host->mux_clk); |
| |
| /* create the divider */ |
| snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev)); |
| init.name = clk_name; |
| init.ops = &clk_divider_ops; |
| init.flags = CLK_SET_RATE_PARENT; |
| clk_div_parents[0] = __clk_get_name(host->mux_clk); |
| init.parent_names = clk_div_parents; |
| init.num_parents = ARRAY_SIZE(clk_div_parents); |
| |
| host->cfg_div.reg = host->regs + SD_EMMC_CLOCK; |
| host->cfg_div.shift = __bf_shf(CLK_DIV_MASK); |
| host->cfg_div.width = __builtin_popcountl(CLK_DIV_MASK); |
| host->cfg_div.hw.init = &init; |
| host->cfg_div.flags = CLK_DIVIDER_ONE_BASED | |
| CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_ALLOW_ZERO; |
| |
| host->cfg_div_clk = devm_clk_register(host->dev, &host->cfg_div.hw); |
| if (WARN_ON(PTR_ERR_OR_ZERO(host->cfg_div_clk))) |
| return PTR_ERR(host->cfg_div_clk); |
| |
| /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */ |
| clk_reg = 0; |
| clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180); |
| clk_reg |= FIELD_PREP(CLK_SRC_MASK, CLK_SRC_XTAL); |
| clk_reg |= FIELD_PREP(CLK_DIV_MASK, CLK_DIV_MAX); |
| clk_reg &= ~CLK_ALWAYS_ON; |
| writel(clk_reg, host->regs + SD_EMMC_CLOCK); |
| |
| /* Ensure clock starts in "auto" mode, not "always on" */ |
| cfg = readl(host->regs + SD_EMMC_CFG); |
| cfg &= ~CFG_CLK_ALWAYS_ON; |
| cfg |= CFG_AUTO_CLK; |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| |
| ret = clk_prepare_enable(host->cfg_div_clk); |
| if (ret) |
| return ret; |
| |
| /* Get the nearest minimum clock to 400KHz */ |
| host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000); |
| |
| ret = meson_mmc_clk_set(host, host->mmc->f_min); |
| if (ret) |
| clk_disable_unprepare(host->cfg_div_clk); |
| |
| return ret; |
| } |
| |
| static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| u32 bus_width; |
| u32 val, orig; |
| |
| /* |
| * GPIO regulator, only controls switching between 1v8 and |
| * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON. |
| */ |
| switch (ios->power_mode) { |
| case MMC_POWER_OFF: |
| if (!IS_ERR(mmc->supply.vmmc)) |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); |
| |
| if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) { |
| regulator_disable(mmc->supply.vqmmc); |
| host->vqmmc_enabled = false; |
| } |
| |
| break; |
| |
| case MMC_POWER_UP: |
| if (!IS_ERR(mmc->supply.vmmc)) |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); |
| break; |
| |
| case MMC_POWER_ON: |
| if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) { |
| int ret = regulator_enable(mmc->supply.vqmmc); |
| |
| if (ret < 0) |
| dev_err(mmc_dev(mmc), |
| "failed to enable vqmmc regulator\n"); |
| else |
| host->vqmmc_enabled = true; |
| } |
| |
| break; |
| } |
| |
| |
| meson_mmc_clk_set(host, ios->clock); |
| |
| /* Bus width */ |
| switch (ios->bus_width) { |
| case MMC_BUS_WIDTH_1: |
| bus_width = CFG_BUS_WIDTH_1; |
| break; |
| case MMC_BUS_WIDTH_4: |
| bus_width = CFG_BUS_WIDTH_4; |
| break; |
| case MMC_BUS_WIDTH_8: |
| bus_width = CFG_BUS_WIDTH_8; |
| break; |
| default: |
| dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n", |
| ios->bus_width); |
| bus_width = CFG_BUS_WIDTH_4; |
| } |
| |
| val = readl(host->regs + SD_EMMC_CFG); |
| orig = val; |
| |
| val &= ~CFG_BUS_WIDTH_MASK; |
| val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width); |
| |
| val &= ~CFG_DDR; |
| if (ios->timing == MMC_TIMING_UHS_DDR50 || |
| ios->timing == MMC_TIMING_MMC_DDR52 || |
| ios->timing == MMC_TIMING_MMC_HS400) |
| val |= CFG_DDR; |
| |
| val &= ~CFG_CHK_DS; |
| if (ios->timing == MMC_TIMING_MMC_HS400) |
| val |= CFG_CHK_DS; |
| |
| if (val != orig) { |
| writel(val, host->regs + SD_EMMC_CFG); |
| dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n", |
| __func__, orig, val); |
| } |
| } |
| |
| static void meson_mmc_request_done(struct mmc_host *mmc, |
| struct mmc_request *mrq) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| |
| host->cmd = NULL; |
| mmc_request_done(host->mmc, mrq); |
| } |
| |
| static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| u32 cfg, blksz_old; |
| |
| cfg = readl(host->regs + SD_EMMC_CFG); |
| blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg); |
| |
| if (!is_power_of_2(blksz)) |
| dev_err(host->dev, "blksz %u is not a power of 2\n", blksz); |
| |
| blksz = ilog2(blksz); |
| |
| /* check if block-size matches, if not update */ |
| if (blksz == blksz_old) |
| return; |
| |
| dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__, |
| blksz_old, blksz); |
| |
| cfg &= ~CFG_BLK_LEN_MASK; |
| cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz); |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| } |
| |
| static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg) |
| { |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| if (cmd->flags & MMC_RSP_136) |
| *cmd_cfg |= CMD_CFG_RESP_128; |
| *cmd_cfg |= CMD_CFG_RESP_NUM; |
| |
| if (!(cmd->flags & MMC_RSP_CRC)) |
| *cmd_cfg |= CMD_CFG_RESP_NOCRC; |
| |
| if (cmd->flags & MMC_RSP_BUSY) |
| *cmd_cfg |= CMD_CFG_R1B; |
| } else { |
| *cmd_cfg |= CMD_CFG_NO_RESP; |
| } |
| } |
| |
| static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| struct mmc_data *data = cmd->data; |
| u32 cmd_cfg = 0, cmd_data = 0; |
| unsigned int xfer_bytes = 0; |
| |
| /* Setup descriptors */ |
| dma_rmb(); |
| |
| cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode); |
| cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ |
| |
| meson_mmc_set_response_bits(cmd, &cmd_cfg); |
| |
| /* data? */ |
| if (data) { |
| cmd_cfg |= CMD_CFG_DATA_IO; |
| cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK, |
| ilog2(meson_mmc_get_timeout_msecs(data))); |
| |
| if (data->blocks > 1) { |
| cmd_cfg |= CMD_CFG_BLOCK_MODE; |
| cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, |
| data->blocks); |
| meson_mmc_set_blksz(mmc, data->blksz); |
| } else { |
| cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz); |
| } |
| |
| data->bytes_xfered = 0; |
| xfer_bytes = data->blksz * data->blocks; |
| if (data->flags & MMC_DATA_WRITE) { |
| cmd_cfg |= CMD_CFG_DATA_WR; |
| WARN_ON(xfer_bytes > host->bounce_buf_size); |
| sg_copy_to_buffer(data->sg, data->sg_len, |
| host->bounce_buf, xfer_bytes); |
| dma_wmb(); |
| } |
| |
| cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; |
| } else { |
| cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK, |
| ilog2(SD_EMMC_CMD_TIMEOUT)); |
| } |
| |
| host->cmd = cmd; |
| |
| /* Last descriptor */ |
| cmd_cfg |= CMD_CFG_END_OF_CHAIN; |
| writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG); |
| writel(cmd_data, host->regs + SD_EMMC_CMD_DAT); |
| writel(0, host->regs + SD_EMMC_CMD_RSP); |
| wmb(); /* ensure descriptor is written before kicked */ |
| writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG); |
| } |
| |
| static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| |
| /* Stop execution */ |
| writel(0, host->regs + SD_EMMC_START); |
| |
| if (mrq->sbc) |
| meson_mmc_start_cmd(mmc, mrq->sbc); |
| else |
| meson_mmc_start_cmd(mmc, mrq->cmd); |
| } |
| |
| static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) |
| { |
| struct meson_host *host = mmc_priv(mmc); |
| |
| if (cmd->flags & MMC_RSP_136) { |
| cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3); |
| cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2); |
| cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1); |
| cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP); |
| } else if (cmd->flags & MMC_RSP_PRESENT) { |
| cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP); |
| } |
| } |
| |
| static irqreturn_t meson_mmc_irq(int irq, void *dev_id) |
| { |
| struct meson_host *host = dev_id; |
| struct mmc_command *cmd; |
| struct mmc_data *data; |
| u32 irq_en, status, raw_status; |
| irqreturn_t ret = IRQ_HANDLED; |
| |
| if (WARN_ON(!host)) |
| return IRQ_NONE; |
| |
| cmd = host->cmd; |
| |
| if (WARN_ON(!cmd)) |
| return IRQ_NONE; |
| |
| data = cmd->data; |
| |
| spin_lock(&host->lock); |
| irq_en = readl(host->regs + SD_EMMC_IRQ_EN); |
| raw_status = readl(host->regs + SD_EMMC_STATUS); |
| status = raw_status & irq_en; |
| |
| if (!status) { |
| dev_warn(host->dev, "Spurious IRQ! status=0x%08x, irq_en=0x%08x\n", |
| raw_status, irq_en); |
| ret = IRQ_NONE; |
| goto out; |
| } |
| |
| meson_mmc_read_resp(host->mmc, cmd); |
| |
| cmd->error = 0; |
| if (status & IRQ_RXD_ERR_MASK) { |
| dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); |
| cmd->error = -EILSEQ; |
| } |
| if (status & IRQ_TXD_ERR) { |
| dev_dbg(host->dev, "Unhandled IRQ: TXD error\n"); |
| cmd->error = -EILSEQ; |
| } |
| if (status & IRQ_DESC_ERR) |
| dev_dbg(host->dev, "Unhandled IRQ: Descriptor error\n"); |
| if (status & IRQ_RESP_ERR) { |
| dev_dbg(host->dev, "Unhandled IRQ: Response error\n"); |
| cmd->error = -EILSEQ; |
| } |
| if (status & IRQ_RESP_TIMEOUT) { |
| dev_dbg(host->dev, "Unhandled IRQ: Response timeout\n"); |
| cmd->error = -ETIMEDOUT; |
| } |
| if (status & IRQ_DESC_TIMEOUT) { |
| dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n"); |
| cmd->error = -ETIMEDOUT; |
| } |
| if (status & IRQ_SDIO) |
| dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n"); |
| |
| if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { |
| if (data && !cmd->error) |
| data->bytes_xfered = data->blksz * data->blocks; |
| ret = IRQ_WAKE_THREAD; |
| } else { |
| dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n", |
| status, cmd->opcode, cmd->arg, |
| cmd->flags, cmd->mrq->stop ? 1 : 0); |
| if (cmd->data) { |
| struct mmc_data *data = cmd->data; |
| |
| dev_warn(host->dev, "\tblksz %u blocks %u flags 0x%08x (%s%s)", |
| data->blksz, data->blocks, data->flags, |
| data->flags & MMC_DATA_WRITE ? "write" : "", |
| data->flags & MMC_DATA_READ ? "read" : ""); |
| } |
| } |
| |
| out: |
| /* ack all (enabled) interrupts */ |
| writel(status, host->regs + SD_EMMC_STATUS); |
| |
| if (ret == IRQ_HANDLED) |
| meson_mmc_request_done(host->mmc, cmd->mrq); |
| |
| spin_unlock(&host->lock); |
| return ret; |
| } |
| |
| static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) |
| { |
| struct meson_host *host = dev_id; |
| struct mmc_command *next_cmd, *cmd = host->cmd; |
| struct mmc_data *data; |
| unsigned int xfer_bytes; |
| |
| if (WARN_ON(!cmd)) |
| return IRQ_NONE; |
| |
| data = cmd->data; |
| if (data && data->flags & MMC_DATA_READ) { |
| xfer_bytes = data->blksz * data->blocks; |
| WARN_ON(xfer_bytes > host->bounce_buf_size); |
| sg_copy_from_buffer(data->sg, data->sg_len, |
| host->bounce_buf, xfer_bytes); |
| } |
| |
| next_cmd = meson_mmc_get_next_command(cmd); |
| if (next_cmd) |
| meson_mmc_start_cmd(host->mmc, next_cmd); |
| else |
| meson_mmc_request_done(host->mmc, cmd->mrq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * NOTE: we only need this until the GPIO/pinctrl driver can handle |
| * interrupts. For now, the MMC core will use this for polling. |
| */ |
| static int meson_mmc_get_cd(struct mmc_host *mmc) |
| { |
| int status = mmc_gpio_get_cd(mmc); |
| |
| if (status == -ENOSYS) |
| return 1; /* assume present */ |
| |
| return status; |
| } |
| |
| static void meson_mmc_cfg_init(struct meson_host *host) |
| { |
| u32 cfg = 0; |
| |
| cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK, |
| ilog2(SD_EMMC_CFG_RESP_TIMEOUT)); |
| cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP)); |
| cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE)); |
| |
| writel(cfg, host->regs + SD_EMMC_CFG); |
| } |
| |
| static const struct mmc_host_ops meson_mmc_ops = { |
| .request = meson_mmc_request, |
| .set_ios = meson_mmc_set_ios, |
| .get_cd = meson_mmc_get_cd, |
| }; |
| |
| static int meson_mmc_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct meson_host *host; |
| struct mmc_host *mmc; |
| int ret, irq; |
| |
| mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev); |
| if (!mmc) |
| return -ENOMEM; |
| host = mmc_priv(mmc); |
| host->mmc = mmc; |
| host->dev = &pdev->dev; |
| dev_set_drvdata(&pdev->dev, host); |
| |
| spin_lock_init(&host->lock); |
| |
| /* Get regulators and the supported OCR mask */ |
| host->vqmmc_enabled = false; |
| ret = mmc_regulator_get_supply(mmc); |
| if (ret == -EPROBE_DEFER) |
| goto free_host; |
| |
| ret = mmc_of_parse(mmc); |
| if (ret) { |
| if (ret != -EPROBE_DEFER) |
| dev_warn(&pdev->dev, "error parsing DT: %d\n", ret); |
| goto free_host; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| host->regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(host->regs)) { |
| ret = PTR_ERR(host->regs); |
| goto free_host; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (!irq) { |
| dev_err(&pdev->dev, "failed to get interrupt resource.\n"); |
| ret = -EINVAL; |
| goto free_host; |
| } |
| |
| host->core_clk = devm_clk_get(&pdev->dev, "core"); |
| if (IS_ERR(host->core_clk)) { |
| ret = PTR_ERR(host->core_clk); |
| goto free_host; |
| } |
| |
| ret = clk_prepare_enable(host->core_clk); |
| if (ret) |
| goto free_host; |
| |
| ret = meson_mmc_clk_init(host); |
| if (ret) |
| goto err_core_clk; |
| |
| /* Stop execution */ |
| writel(0, host->regs + SD_EMMC_START); |
| |
| /* clear, ack, enable all interrupts */ |
| writel(0, host->regs + SD_EMMC_IRQ_EN); |
| writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS); |
| writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN); |
| |
| /* set config to sane default */ |
| meson_mmc_cfg_init(host); |
| |
| ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq, |
| meson_mmc_irq_thread, IRQF_SHARED, |
| NULL, host); |
| if (ret) |
| goto err_div_clk; |
| |
| mmc->caps |= MMC_CAP_CMD23; |
| mmc->max_blk_count = CMD_CFG_LENGTH_MASK; |
| mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; |
| |
| /* data bounce buffer */ |
| host->bounce_buf_size = mmc->max_req_size; |
| host->bounce_buf = |
| dma_alloc_coherent(host->dev, host->bounce_buf_size, |
| &host->bounce_dma_addr, GFP_KERNEL); |
| if (host->bounce_buf == NULL) { |
| dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); |
| ret = -ENOMEM; |
| goto err_div_clk; |
| } |
| |
| mmc->ops = &meson_mmc_ops; |
| mmc_add_host(mmc); |
| |
| return 0; |
| |
| err_div_clk: |
| clk_disable_unprepare(host->cfg_div_clk); |
| err_core_clk: |
| clk_disable_unprepare(host->core_clk); |
| free_host: |
| mmc_free_host(mmc); |
| return ret; |
| } |
| |
| static int meson_mmc_remove(struct platform_device *pdev) |
| { |
| struct meson_host *host = dev_get_drvdata(&pdev->dev); |
| |
| mmc_remove_host(host->mmc); |
| |
| /* disable interrupts */ |
| writel(0, host->regs + SD_EMMC_IRQ_EN); |
| |
| dma_free_coherent(host->dev, host->bounce_buf_size, |
| host->bounce_buf, host->bounce_dma_addr); |
| |
| clk_disable_unprepare(host->cfg_div_clk); |
| clk_disable_unprepare(host->core_clk); |
| |
| mmc_free_host(host->mmc); |
| return 0; |
| } |
| |
| static const struct of_device_id meson_mmc_of_match[] = { |
| { .compatible = "amlogic,meson-gx-mmc", }, |
| { .compatible = "amlogic,meson-gxbb-mmc", }, |
| { .compatible = "amlogic,meson-gxl-mmc", }, |
| { .compatible = "amlogic,meson-gxm-mmc", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, meson_mmc_of_match); |
| |
| static struct platform_driver meson_mmc_driver = { |
| .probe = meson_mmc_probe, |
| .remove = meson_mmc_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = of_match_ptr(meson_mmc_of_match), |
| }, |
| }; |
| |
| module_platform_driver(meson_mmc_driver); |
| |
| MODULE_DESCRIPTION("Amlogic S905*/GX* SD/eMMC driver"); |
| MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>"); |
| MODULE_LICENSE("GPL v2"); |