| /* |
| * drivers/video/chipsfb.c -- frame buffer device for |
| * Chips & Technologies 65550 chip. |
| * |
| * Copyright (C) 1998-2002 Paul Mackerras |
| * |
| * This file is derived from the Powermac "chips" driver: |
| * Copyright (C) 1997 Fabio Riccardi. |
| * And from the frame buffer device for Open Firmware-initialized devices: |
| * Copyright (C) 1997 Geert Uytterhoeven. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/console.h> |
| #include <asm/io.h> |
| |
| #ifdef CONFIG_PMAC_BACKLIGHT |
| #include <asm/backlight.h> |
| #endif |
| |
| /* |
| * Since we access the display with inb/outb to fixed port numbers, |
| * we can only handle one 6555x chip. -- paulus |
| */ |
| #define write_ind(num, val, ap, dp) do { \ |
| outb((num), (ap)); outb((val), (dp)); \ |
| } while (0) |
| #define read_ind(num, var, ap, dp) do { \ |
| outb((num), (ap)); var = inb((dp)); \ |
| } while (0) |
| |
| /* extension registers */ |
| #define write_xr(num, val) write_ind(num, val, 0x3d6, 0x3d7) |
| #define read_xr(num, var) read_ind(num, var, 0x3d6, 0x3d7) |
| /* flat panel registers */ |
| #define write_fr(num, val) write_ind(num, val, 0x3d0, 0x3d1) |
| #define read_fr(num, var) read_ind(num, var, 0x3d0, 0x3d1) |
| /* CRTC registers */ |
| #define write_cr(num, val) write_ind(num, val, 0x3d4, 0x3d5) |
| #define read_cr(num, var) read_ind(num, var, 0x3d4, 0x3d5) |
| /* graphics registers */ |
| #define write_gr(num, val) write_ind(num, val, 0x3ce, 0x3cf) |
| #define read_gr(num, var) read_ind(num, var, 0x3ce, 0x3cf) |
| /* sequencer registers */ |
| #define write_sr(num, val) write_ind(num, val, 0x3c4, 0x3c5) |
| #define read_sr(num, var) read_ind(num, var, 0x3c4, 0x3c5) |
| /* attribute registers - slightly strange */ |
| #define write_ar(num, val) do { \ |
| inb(0x3da); write_ind(num, val, 0x3c0, 0x3c0); \ |
| } while (0) |
| #define read_ar(num, var) do { \ |
| inb(0x3da); read_ind(num, var, 0x3c0, 0x3c1); \ |
| } while (0) |
| |
| /* |
| * Exported functions |
| */ |
| int chips_init(void); |
| |
| static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *); |
| static int chipsfb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info); |
| static int chipsfb_set_par(struct fb_info *info); |
| static int chipsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int transp, struct fb_info *info); |
| static int chipsfb_blank(int blank, struct fb_info *info); |
| |
| static struct fb_ops chipsfb_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = chipsfb_check_var, |
| .fb_set_par = chipsfb_set_par, |
| .fb_setcolreg = chipsfb_setcolreg, |
| .fb_blank = chipsfb_blank, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| }; |
| |
| static int chipsfb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| if (var->xres > 800 || var->yres > 600 |
| || var->xres_virtual > 800 || var->yres_virtual > 600 |
| || (var->bits_per_pixel != 8 && var->bits_per_pixel != 16) |
| || var->nonstd |
| || (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) |
| return -EINVAL; |
| |
| var->xres = var->xres_virtual = 800; |
| var->yres = var->yres_virtual = 600; |
| |
| return 0; |
| } |
| |
| static int chipsfb_set_par(struct fb_info *info) |
| { |
| if (info->var.bits_per_pixel == 16) { |
| write_cr(0x13, 200); // Set line length (doublewords) |
| write_xr(0x81, 0x14); // 15 bit (555) color mode |
| write_xr(0x82, 0x00); // Disable palettes |
| write_xr(0x20, 0x10); // 16 bit blitter mode |
| |
| info->fix.line_length = 800*2; |
| info->fix.visual = FB_VISUAL_TRUECOLOR; |
| |
| info->var.red.offset = 10; |
| info->var.green.offset = 5; |
| info->var.blue.offset = 0; |
| info->var.red.length = info->var.green.length = |
| info->var.blue.length = 5; |
| |
| } else { |
| /* p->var.bits_per_pixel == 8 */ |
| write_cr(0x13, 100); // Set line length (doublewords) |
| write_xr(0x81, 0x12); // 8 bit color mode |
| write_xr(0x82, 0x08); // Graphics gamma enable |
| write_xr(0x20, 0x00); // 8 bit blitter mode |
| |
| info->fix.line_length = 800; |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| |
| info->var.red.offset = info->var.green.offset = |
| info->var.blue.offset = 0; |
| info->var.red.length = info->var.green.length = |
| info->var.blue.length = 8; |
| |
| } |
| return 0; |
| } |
| |
| static int chipsfb_blank(int blank, struct fb_info *info) |
| { |
| return 1; /* get fb_blank to set the colormap to all black */ |
| } |
| |
| static int chipsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int transp, struct fb_info *info) |
| { |
| if (regno > 255) |
| return 1; |
| red >>= 8; |
| green >>= 8; |
| blue >>= 8; |
| outb(regno, 0x3c8); |
| udelay(1); |
| outb(red, 0x3c9); |
| outb(green, 0x3c9); |
| outb(blue, 0x3c9); |
| |
| return 0; |
| } |
| |
| struct chips_init_reg { |
| unsigned char addr; |
| unsigned char data; |
| }; |
| |
| static struct chips_init_reg chips_init_sr[] = { |
| { 0x00, 0x03 }, |
| { 0x01, 0x01 }, |
| { 0x02, 0x0f }, |
| { 0x04, 0x0e } |
| }; |
| |
| static struct chips_init_reg chips_init_gr[] = { |
| { 0x05, 0x00 }, |
| { 0x06, 0x0d }, |
| { 0x08, 0xff } |
| }; |
| |
| static struct chips_init_reg chips_init_ar[] = { |
| { 0x10, 0x01 }, |
| { 0x12, 0x0f }, |
| { 0x13, 0x00 } |
| }; |
| |
| static struct chips_init_reg chips_init_cr[] = { |
| { 0x00, 0x7f }, |
| { 0x01, 0x63 }, |
| { 0x02, 0x63 }, |
| { 0x03, 0x83 }, |
| { 0x04, 0x66 }, |
| { 0x05, 0x10 }, |
| { 0x06, 0x72 }, |
| { 0x07, 0x3e }, |
| { 0x08, 0x00 }, |
| { 0x09, 0x40 }, |
| { 0x0c, 0x00 }, |
| { 0x0d, 0x00 }, |
| { 0x10, 0x59 }, |
| { 0x11, 0x0d }, |
| { 0x12, 0x57 }, |
| { 0x13, 0x64 }, |
| { 0x14, 0x00 }, |
| { 0x15, 0x57 }, |
| { 0x16, 0x73 }, |
| { 0x17, 0xe3 }, |
| { 0x18, 0xff }, |
| { 0x30, 0x02 }, |
| { 0x31, 0x02 }, |
| { 0x32, 0x02 }, |
| { 0x33, 0x02 }, |
| { 0x40, 0x00 }, |
| { 0x41, 0x00 }, |
| { 0x40, 0x80 } |
| }; |
| |
| static struct chips_init_reg chips_init_fr[] = { |
| { 0x01, 0x02 }, |
| { 0x03, 0x08 }, |
| { 0x04, 0x81 }, |
| { 0x05, 0x21 }, |
| { 0x08, 0x0c }, |
| { 0x0a, 0x74 }, |
| { 0x0b, 0x11 }, |
| { 0x10, 0x0c }, |
| { 0x11, 0xe0 }, |
| /* { 0x12, 0x40 }, -- 3400 needs 40, 2400 needs 48, no way to tell */ |
| { 0x20, 0x63 }, |
| { 0x21, 0x68 }, |
| { 0x22, 0x19 }, |
| { 0x23, 0x7f }, |
| { 0x24, 0x68 }, |
| { 0x26, 0x00 }, |
| { 0x27, 0x0f }, |
| { 0x30, 0x57 }, |
| { 0x31, 0x58 }, |
| { 0x32, 0x0d }, |
| { 0x33, 0x72 }, |
| { 0x34, 0x02 }, |
| { 0x35, 0x22 }, |
| { 0x36, 0x02 }, |
| { 0x37, 0x00 } |
| }; |
| |
| static struct chips_init_reg chips_init_xr[] = { |
| { 0xce, 0x00 }, /* set default memory clock */ |
| { 0xcc, 0x43 }, /* memory clock ratio */ |
| { 0xcd, 0x18 }, |
| { 0xce, 0xa1 }, |
| { 0xc8, 0x84 }, |
| { 0xc9, 0x0a }, |
| { 0xca, 0x00 }, |
| { 0xcb, 0x20 }, |
| { 0xcf, 0x06 }, |
| { 0xd0, 0x0e }, |
| { 0x09, 0x01 }, |
| { 0x0a, 0x02 }, |
| { 0x0b, 0x01 }, |
| { 0x20, 0x00 }, |
| { 0x40, 0x03 }, |
| { 0x41, 0x01 }, |
| { 0x42, 0x00 }, |
| { 0x80, 0x82 }, |
| { 0x81, 0x12 }, |
| { 0x82, 0x08 }, |
| { 0xa0, 0x00 }, |
| { 0xa8, 0x00 } |
| }; |
| |
| static void __init chips_hw_init(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(chips_init_xr); ++i) |
| write_xr(chips_init_xr[i].addr, chips_init_xr[i].data); |
| outb(0x29, 0x3c2); /* set misc output reg */ |
| for (i = 0; i < ARRAY_SIZE(chips_init_sr); ++i) |
| write_sr(chips_init_sr[i].addr, chips_init_sr[i].data); |
| for (i = 0; i < ARRAY_SIZE(chips_init_gr); ++i) |
| write_gr(chips_init_gr[i].addr, chips_init_gr[i].data); |
| for (i = 0; i < ARRAY_SIZE(chips_init_ar); ++i) |
| write_ar(chips_init_ar[i].addr, chips_init_ar[i].data); |
| for (i = 0; i < ARRAY_SIZE(chips_init_cr); ++i) |
| write_cr(chips_init_cr[i].addr, chips_init_cr[i].data); |
| for (i = 0; i < ARRAY_SIZE(chips_init_fr); ++i) |
| write_fr(chips_init_fr[i].addr, chips_init_fr[i].data); |
| } |
| |
| static struct fb_fix_screeninfo chipsfb_fix __devinitdata = { |
| .id = "C&T 65550", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_PSEUDOCOLOR, |
| .accel = FB_ACCEL_NONE, |
| .line_length = 800, |
| |
| // FIXME: Assumes 1MB frame buffer, but 65550 supports 1MB or 2MB. |
| // * "3500" PowerBook G3 (the original PB G3) has 2MB. |
| // * 2400 has 1MB composed of 2 Mitsubishi M5M4V4265CTP DRAM chips. |
| // Motherboard actually supports 2MB -- there are two blank locations |
| // for a second pair of DRAMs. (Thanks, Apple!) |
| // * 3400 has 1MB (I think). Don't know if it's expandable. |
| // -- Tim Seufert |
| .smem_len = 0x100000, /* 1MB */ |
| }; |
| |
| static struct fb_var_screeninfo chipsfb_var __devinitdata = { |
| .xres = 800, |
| .yres = 600, |
| .xres_virtual = 800, |
| .yres_virtual = 600, |
| .bits_per_pixel = 8, |
| .red = { .length = 8 }, |
| .green = { .length = 8 }, |
| .blue = { .length = 8 }, |
| .height = -1, |
| .width = -1, |
| .vmode = FB_VMODE_NONINTERLACED, |
| .pixclock = 10000, |
| .left_margin = 16, |
| .right_margin = 16, |
| .upper_margin = 16, |
| .lower_margin = 16, |
| .hsync_len = 8, |
| .vsync_len = 8, |
| }; |
| |
| static void __devinit init_chips(struct fb_info *p, unsigned long addr) |
| { |
| memset(p->screen_base, 0, 0x100000); |
| |
| p->fix = chipsfb_fix; |
| p->fix.smem_start = addr; |
| |
| p->var = chipsfb_var; |
| |
| p->fbops = &chipsfb_ops; |
| p->flags = FBINFO_DEFAULT; |
| |
| fb_alloc_cmap(&p->cmap, 256, 0); |
| |
| chips_hw_init(); |
| } |
| |
| static int __devinit |
| chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent) |
| { |
| struct fb_info *p; |
| unsigned long addr, size; |
| unsigned short cmd; |
| int rc = -ENODEV; |
| |
| if (pci_enable_device(dp) < 0) { |
| dev_err(&dp->dev, "Cannot enable PCI device\n"); |
| goto err_out; |
| } |
| |
| if ((dp->resource[0].flags & IORESOURCE_MEM) == 0) |
| goto err_disable; |
| addr = pci_resource_start(dp, 0); |
| size = pci_resource_len(dp, 0); |
| if (addr == 0) |
| goto err_disable; |
| |
| p = framebuffer_alloc(0, &dp->dev); |
| if (p == NULL) { |
| dev_err(&dp->dev, "Cannot allocate framebuffer structure\n"); |
| rc = -ENOMEM; |
| goto err_disable; |
| } |
| |
| if (pci_request_region(dp, 0, "chipsfb") != 0) { |
| dev_err(&dp->dev, "Cannot request framebuffer\n"); |
| rc = -EBUSY; |
| goto err_release_fb; |
| } |
| |
| #ifdef __BIG_ENDIAN |
| addr += 0x800000; // Use big-endian aperture |
| #endif |
| |
| /* we should use pci_enable_device here, but, |
| the device doesn't declare its I/O ports in its BARs |
| so pci_enable_device won't turn on I/O responses */ |
| pci_read_config_word(dp, PCI_COMMAND, &cmd); |
| cmd |= 3; /* enable memory and IO space */ |
| pci_write_config_word(dp, PCI_COMMAND, cmd); |
| |
| #ifdef CONFIG_PMAC_BACKLIGHT |
| /* turn on the backlight */ |
| mutex_lock(&pmac_backlight_mutex); |
| if (pmac_backlight) { |
| pmac_backlight->props.power = FB_BLANK_UNBLANK; |
| backlight_update_status(pmac_backlight); |
| } |
| mutex_unlock(&pmac_backlight_mutex); |
| #endif /* CONFIG_PMAC_BACKLIGHT */ |
| |
| #ifdef CONFIG_PPC |
| p->screen_base = __ioremap(addr, 0x200000, _PAGE_NO_CACHE); |
| #else |
| p->screen_base = ioremap(addr, 0x200000); |
| #endif |
| if (p->screen_base == NULL) { |
| dev_err(&dp->dev, "Cannot map framebuffer\n"); |
| rc = -ENOMEM; |
| goto err_release_pci; |
| } |
| |
| pci_set_drvdata(dp, p); |
| p->device = &dp->dev; |
| |
| init_chips(p, addr); |
| |
| if (register_framebuffer(p) < 0) { |
| dev_err(&dp->dev,"C&T 65550 framebuffer failed to register\n"); |
| goto err_unmap; |
| } |
| |
| dev_info(&dp->dev,"fb%d: Chips 65550 frame buffer" |
| " (%dK RAM detected)\n", |
| p->node, p->fix.smem_len / 1024); |
| |
| return 0; |
| |
| err_unmap: |
| iounmap(p->screen_base); |
| err_release_pci: |
| pci_release_region(dp, 0); |
| err_release_fb: |
| framebuffer_release(p); |
| err_disable: |
| err_out: |
| return rc; |
| } |
| |
| static void __devexit chipsfb_remove(struct pci_dev *dp) |
| { |
| struct fb_info *p = pci_get_drvdata(dp); |
| |
| if (p->screen_base == NULL) |
| return; |
| unregister_framebuffer(p); |
| iounmap(p->screen_base); |
| p->screen_base = NULL; |
| pci_release_region(dp, 0); |
| } |
| |
| #ifdef CONFIG_PM |
| static int chipsfb_pci_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct fb_info *p = pci_get_drvdata(pdev); |
| |
| if (state.event == pdev->dev.power.power_state.event) |
| return 0; |
| if (state.event != PM_SUSPEND_MEM) |
| goto done; |
| |
| acquire_console_sem(); |
| chipsfb_blank(1, p); |
| fb_set_suspend(p, 1); |
| release_console_sem(); |
| done: |
| pdev->dev.power.power_state = state; |
| return 0; |
| } |
| |
| static int chipsfb_pci_resume(struct pci_dev *pdev) |
| { |
| struct fb_info *p = pci_get_drvdata(pdev); |
| |
| acquire_console_sem(); |
| fb_set_suspend(p, 0); |
| chipsfb_blank(0, p); |
| release_console_sem(); |
| |
| pdev->dev.power.power_state = PMSG_ON; |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| |
| static struct pci_device_id chipsfb_pci_tbl[] = { |
| { PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_65550, PCI_ANY_ID, PCI_ANY_ID }, |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, chipsfb_pci_tbl); |
| |
| static struct pci_driver chipsfb_driver = { |
| .name = "chipsfb", |
| .id_table = chipsfb_pci_tbl, |
| .probe = chipsfb_pci_init, |
| .remove = __devexit_p(chipsfb_remove), |
| #ifdef CONFIG_PM |
| .suspend = chipsfb_pci_suspend, |
| .resume = chipsfb_pci_resume, |
| #endif |
| }; |
| |
| int __init chips_init(void) |
| { |
| if (fb_get_options("chipsfb", NULL)) |
| return -ENODEV; |
| |
| return pci_register_driver(&chipsfb_driver); |
| } |
| |
| module_init(chips_init); |
| |
| static void __exit chipsfb_exit(void) |
| { |
| pci_unregister_driver(&chipsfb_driver); |
| } |
| |
| MODULE_LICENSE("GPL"); |