| /* |
| * Universal Interface for Intel High Definition Audio Codec |
| * |
| * HD audio interface patch for ALC 260/880/882 codecs |
| * |
| * Copyright (c) 2004 PeiSen Hou <pshou@realtek.com.tw> |
| * Takashi Iwai <tiwai@suse.de> |
| * |
| * This driver is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This driver is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <sound/driver.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <sound/core.h> |
| #include "hda_codec.h" |
| #include "hda_local.h" |
| |
| |
| /* ALC880 board config type */ |
| enum { |
| ALC880_MINIMAL, |
| ALC880_3ST, |
| ALC880_3ST_DIG, |
| ALC880_5ST, |
| ALC880_5ST_DIG, |
| ALC880_W810, |
| }; |
| |
| struct alc_spec { |
| /* codec parameterization */ |
| unsigned int front_panel: 1; |
| |
| snd_kcontrol_new_t* mixers[2]; |
| unsigned int num_mixers; |
| |
| struct hda_verb *init_verbs; |
| |
| char* stream_name_analog; |
| struct hda_pcm_stream *stream_analog_playback; |
| struct hda_pcm_stream *stream_analog_capture; |
| |
| char* stream_name_digital; |
| struct hda_pcm_stream *stream_digital_playback; |
| struct hda_pcm_stream *stream_digital_capture; |
| |
| /* playback */ |
| struct hda_multi_out multiout; |
| |
| /* capture */ |
| unsigned int num_adc_nids; |
| hda_nid_t *adc_nids; |
| hda_nid_t dig_in_nid; |
| |
| /* capture source */ |
| const struct hda_input_mux *input_mux; |
| unsigned int cur_mux[3]; |
| |
| /* channel model */ |
| const struct alc_channel_mode *channel_mode; |
| int num_channel_mode; |
| |
| /* PCM information */ |
| struct hda_pcm pcm_rec[2]; |
| }; |
| |
| /* DAC/ADC assignment */ |
| |
| static hda_nid_t alc880_dac_nids[4] = { |
| /* front, rear, clfe, rear_surr */ |
| 0x02, 0x05, 0x04, 0x03 |
| }; |
| |
| static hda_nid_t alc880_w810_dac_nids[3] = { |
| /* front, rear/surround, clfe */ |
| 0x02, 0x03, 0x04 |
| }; |
| |
| static hda_nid_t alc880_adc_nids[3] = { |
| /* ADC0-2 */ |
| 0x07, 0x08, 0x09, |
| }; |
| |
| #define ALC880_DIGOUT_NID 0x06 |
| #define ALC880_DIGIN_NID 0x0a |
| |
| static hda_nid_t alc260_dac_nids[1] = { |
| /* front */ |
| 0x02, |
| }; |
| |
| static hda_nid_t alc260_adc_nids[2] = { |
| /* ADC0-1 */ |
| 0x04, 0x05, |
| }; |
| |
| #define ALC260_DIGOUT_NID 0x03 |
| #define ALC260_DIGIN_NID 0x06 |
| |
| static struct hda_input_mux alc880_capture_source = { |
| .num_items = 4, |
| .items = { |
| { "Mic", 0x0 }, |
| { "Front Mic", 0x3 }, |
| { "Line", 0x2 }, |
| { "CD", 0x4 }, |
| }, |
| }; |
| |
| static struct hda_input_mux alc260_capture_source = { |
| .num_items = 4, |
| .items = { |
| { "Mic", 0x0 }, |
| { "Front Mic", 0x1 }, |
| { "Line", 0x2 }, |
| { "CD", 0x4 }, |
| }, |
| }; |
| |
| /* |
| * input MUX handling |
| */ |
| static int alc_mux_enum_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct alc_spec *spec = codec->spec; |
| return snd_hda_input_mux_info(spec->input_mux, uinfo); |
| } |
| |
| static int alc_mux_enum_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct alc_spec *spec = codec->spec; |
| unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); |
| |
| ucontrol->value.enumerated.item[0] = spec->cur_mux[adc_idx]; |
| return 0; |
| } |
| |
| static int alc_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct alc_spec *spec = codec->spec; |
| unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); |
| return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol, |
| spec->adc_nids[adc_idx], &spec->cur_mux[adc_idx]); |
| } |
| |
| /* |
| * channel mode setting |
| */ |
| struct alc_channel_mode { |
| int channels; |
| const struct hda_verb *sequence; |
| }; |
| |
| |
| /* |
| * channel source setting (2/6 channel selection for 3-stack) |
| */ |
| |
| /* |
| * set the path ways for 2 channel output |
| * need to set the codec line out and mic 1 pin widgets to inputs |
| */ |
| static struct hda_verb alc880_threestack_ch2_init[] = { |
| /* set pin widget 1Ah (line in) for input */ |
| { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, |
| /* set pin widget 18h (mic1) for input, for mic also enable the vref */ |
| { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, |
| /* mute the output for Line In PW */ |
| { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 }, |
| /* mute for Mic1 PW */ |
| { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 }, |
| { } /* end */ |
| }; |
| |
| /* |
| * 6ch mode |
| * need to set the codec line out and mic 1 pin widgets to outputs |
| */ |
| static struct hda_verb alc880_threestack_ch6_init[] = { |
| /* set pin widget 1Ah (line in) for output */ |
| { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, |
| /* set pin widget 18h (mic1) for output */ |
| { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, |
| /* unmute the output for Line In PW */ |
| { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 }, |
| /* unmute for Mic1 PW */ |
| { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 }, |
| /* for rear channel output using Line In 1 |
| * set select widget connection (nid = 0x12) - to summer node |
| * for rear NID = 0x0f...offset 3 in connection list |
| */ |
| { 0x12, AC_VERB_SET_CONNECT_SEL, 0x3 }, |
| /* for Mic1 - retask for center/lfe */ |
| /* set select widget connection (nid = 0x10) - to summer node for |
| * front CLFE NID = 0x0e...offset 2 in connection list |
| */ |
| { 0x10, AC_VERB_SET_CONNECT_SEL, 0x2 }, |
| { } /* end */ |
| }; |
| |
| static struct alc_channel_mode alc880_threestack_modes[2] = { |
| { 2, alc880_threestack_ch2_init }, |
| { 6, alc880_threestack_ch6_init }, |
| }; |
| |
| |
| /* |
| * channel source setting (6/8 channel selection for 5-stack) |
| */ |
| |
| /* set the path ways for 6 channel output |
| * need to set the codec line out and mic 1 pin widgets to inputs |
| */ |
| static struct hda_verb alc880_fivestack_ch6_init[] = { |
| /* set pin widget 1Ah (line in) for input */ |
| { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 }, |
| /* mute the output for Line In PW */ |
| { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 }, |
| { } /* end */ |
| }; |
| |
| /* need to set the codec line out and mic 1 pin widgets to outputs */ |
| static struct hda_verb alc880_fivestack_ch8_init[] = { |
| /* set pin widget 1Ah (line in) for output */ |
| { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 }, |
| /* unmute the output for Line In PW */ |
| { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 }, |
| /* output for surround channel output using Line In 1 */ |
| /* set select widget connection (nid = 0x12) - to summer node |
| * for surr_rear NID = 0x0d...offset 1 in connection list |
| */ |
| { 0x12, AC_VERB_SET_CONNECT_SEL, 0x1 }, |
| { } /* end */ |
| }; |
| |
| static struct alc_channel_mode alc880_fivestack_modes[2] = { |
| { 6, alc880_fivestack_ch6_init }, |
| { 8, alc880_fivestack_ch8_init }, |
| }; |
| |
| /* |
| * channel source setting for W810 system |
| * |
| * W810 has rear IO for: |
| * Front (DAC 02) |
| * Surround (DAC 03) |
| * Center/LFE (DAC 04) |
| * Digital out (06) |
| * |
| * The system also has a pair of internal speakers, and a headphone jack. |
| * These are both connected to Line2 on the codec, hence to DAC 02. |
| * |
| * There is a variable resistor to control the speaker or headphone |
| * volume. This is a hardware-only device without a software API. |
| * |
| * Plugging headphones in will disable the internal speakers. This is |
| * implemented in hardware, not via the driver using jack sense. In |
| * a similar fashion, plugging into the rear socket marked "front" will |
| * disable both the speakers and headphones. |
| * |
| * For input, there's a microphone jack, and an "audio in" jack. |
| * These may not do anything useful with this driver yet, because I |
| * haven't setup any initialization verbs for these yet... |
| */ |
| |
| static struct alc_channel_mode alc880_w810_modes[1] = { |
| { 6, NULL } |
| }; |
| |
| /* |
| */ |
| static int alc880_ch_mode_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct alc_spec *spec = codec->spec; |
| |
| snd_assert(spec->channel_mode, return -ENXIO); |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; |
| uinfo->count = 1; |
| uinfo->value.enumerated.items = 2; |
| if (uinfo->value.enumerated.item >= 2) |
| uinfo->value.enumerated.item = 1; |
| sprintf(uinfo->value.enumerated.name, "%dch", |
| spec->channel_mode[uinfo->value.enumerated.item].channels); |
| return 0; |
| } |
| |
| static int alc880_ch_mode_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct alc_spec *spec = codec->spec; |
| |
| snd_assert(spec->channel_mode, return -ENXIO); |
| ucontrol->value.enumerated.item[0] = |
| (spec->multiout.max_channels == spec->channel_mode[0].channels) ? 0 : 1; |
| return 0; |
| } |
| |
| static int alc880_ch_mode_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct alc_spec *spec = codec->spec; |
| int mode; |
| |
| snd_assert(spec->channel_mode, return -ENXIO); |
| mode = ucontrol->value.enumerated.item[0] ? 1 : 0; |
| if (spec->multiout.max_channels == spec->channel_mode[mode].channels && |
| ! codec->in_resume) |
| return 0; |
| |
| /* change the current channel setting */ |
| spec->multiout.max_channels = spec->channel_mode[mode].channels; |
| if (spec->channel_mode[mode].sequence) |
| snd_hda_sequence_write(codec, spec->channel_mode[mode].sequence); |
| |
| return 1; |
| } |
| |
| |
| /* |
| */ |
| |
| /* 3-stack mode |
| * Pin assignment: Front=0x14, Line-In/Rear=0x1a, Mic/CLFE=0x18, F-Mic=0x1b |
| * HP=0x19 |
| */ |
| static snd_kcontrol_new_t alc880_base_mixer[] = { |
| HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Surround Playback Switch", 0x1a, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x18, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x18, 2, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), |
| HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), |
| HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), |
| HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), |
| HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT), |
| HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT), |
| HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), |
| HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), |
| HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| /* The multiple "Capture Source" controls confuse alsamixer |
| * So call somewhat different.. |
| * FIXME: the controls appear in the "playback" view! |
| */ |
| /* .name = "Capture Source", */ |
| .name = "Input Source", |
| .count = 2, |
| .info = alc_mux_enum_info, |
| .get = alc_mux_enum_get, |
| .put = alc_mux_enum_put, |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Channel Mode", |
| .info = alc880_ch_mode_info, |
| .get = alc880_ch_mode_get, |
| .put = alc880_ch_mode_put, |
| }, |
| { } /* end */ |
| }; |
| |
| /* 5-stack mode |
| * Pin assignment: Front=0x14, Rear=0x17, CLFE=0x16 |
| * Line-In/Side=0x1a, Mic=0x18, F-Mic=0x1b, HP=0x19 |
| */ |
| static snd_kcontrol_new_t alc880_five_stack_mixer[] = { |
| HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Surround Playback Switch", 0x17, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x16, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Side Playback Switch", 0x1a, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), |
| HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), |
| HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), |
| HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), |
| HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT), |
| HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT), |
| HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), |
| HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), |
| HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| /* The multiple "Capture Source" controls confuse alsamixer |
| * So call somewhat different.. |
| * FIXME: the controls appear in the "playback" view! |
| */ |
| /* .name = "Capture Source", */ |
| .name = "Input Source", |
| .count = 2, |
| .info = alc_mux_enum_info, |
| .get = alc_mux_enum_get, |
| .put = alc_mux_enum_put, |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Channel Mode", |
| .info = alc880_ch_mode_info, |
| .get = alc880_ch_mode_get, |
| .put = alc880_ch_mode_put, |
| }, |
| { } /* end */ |
| }; |
| |
| static snd_kcontrol_new_t alc880_w810_base_mixer[] = { |
| HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Surround Playback Switch", 0x15, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x16, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| /* The multiple "Capture Source" controls confuse alsamixer |
| * So call somewhat different.. |
| * FIXME: the controls appear in the "playback" view! |
| */ |
| /* .name = "Capture Source", */ |
| .name = "Input Source", |
| .count = 3, |
| .info = alc_mux_enum_info, |
| .get = alc_mux_enum_get, |
| .put = alc_mux_enum_put, |
| }, |
| { } /* end */ |
| }; |
| |
| /* |
| */ |
| static int alc_build_controls(struct hda_codec *codec) |
| { |
| struct alc_spec *spec = codec->spec; |
| int err; |
| int i; |
| |
| for (i = 0; i < spec->num_mixers; i++) { |
| err = snd_hda_add_new_ctls(codec, spec->mixers[i]); |
| if (err < 0) |
| return err; |
| } |
| |
| if (spec->multiout.dig_out_nid) { |
| err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid); |
| if (err < 0) |
| return err; |
| } |
| if (spec->dig_in_nid) { |
| err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid); |
| if (err < 0) |
| return err; |
| } |
| return 0; |
| } |
| |
| /* |
| * initialize the codec volumes, etc |
| */ |
| |
| static struct hda_verb alc880_init_verbs_three_stack[] = { |
| /* Line In pin widget for input */ |
| {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, |
| /* CD pin widget for input */ |
| {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, |
| /* Mic1 (rear panel) pin widget for input and vref at 80% */ |
| {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, |
| /* Mic2 (front panel) pin widget for input and vref at 80% */ |
| {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, |
| /* unmute amp left and right */ |
| {0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, |
| /* set connection select to line in (default select for this ADC) */ |
| {0x07, AC_VERB_SET_CONNECT_SEL, 0x02}, |
| /* unmute front mixer amp left (volume = 0) */ |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* unmute rear mixer amp left and right (volume = 0) */ |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* unmute rear mixer amp left and right (volume = 0) */ |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| |
| /* using rear surround as the path for headphone output */ |
| /* unmute rear surround mixer amp left and right (volume = 0) */ |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* PASD 3 stack boards use the Mic 2 as the headphone output */ |
| /* need to program the selector associated with the Mic 2 pin widget to |
| * surround path (index 0x01) for headphone output */ |
| {0x11, AC_VERB_SET_CONNECT_SEL, 0x01}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* need to retask the Mic 2 pin widget to output */ |
| {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| |
| /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer widget(nid=0x0B) |
| * to support the input path of analog loopback |
| * Note: PASD motherboards uses the Line In 2 as the input for front panel |
| * mic (mic 2) |
| */ |
| /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */ |
| /* unmute CD */ |
| {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, |
| /* unmute Line In */ |
| {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, |
| /* unmute Mic 1 */ |
| {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| /* unmute Line In 2 (for PASD boards Mic 2) */ |
| {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))}, |
| |
| /* Unmute input amps for the line out paths to support the output path of |
| * analog loopback |
| * the mixers on the output path has 2 inputs, one from the DAC and one |
| * from the mixer |
| */ |
| /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ |
| /* Unmute Front out path */ |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| /* Unmute Surround (used as HP) out path */ |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| /* Unmute C/LFE out path */ |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))}, /* mute */ |
| /* Unmute rear Surround out path */ |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| |
| { } |
| }; |
| |
| static struct hda_verb alc880_init_verbs_five_stack[] = { |
| /* Line In pin widget for input */ |
| {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, |
| /* CD pin widget for input */ |
| {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, |
| /* Mic1 (rear panel) pin widget for input and vref at 80% */ |
| {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, |
| /* Mic2 (front panel) pin widget for input and vref at 80% */ |
| {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, |
| /* unmute amp left and right */ |
| {0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, |
| /* set connection select to line in (default select for this ADC) */ |
| {0x07, AC_VERB_SET_CONNECT_SEL, 0x02}, |
| /* unmute front mixer amp left and right (volume = 0) */ |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* five rear and clfe */ |
| /* unmute rear mixer amp left and right (volume = 0) */ |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* unmute clfe mixer amp left and right (volume = 0) */ |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| |
| /* using rear surround as the path for headphone output */ |
| /* unmute rear surround mixer amp left and right (volume = 0) */ |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* PASD 3 stack boards use the Mic 2 as the headphone output */ |
| /* need to program the selector associated with the Mic 2 pin widget to |
| * surround path (index 0x01) for headphone output |
| */ |
| {0x11, AC_VERB_SET_CONNECT_SEL, 0x01}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x19, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* need to retask the Mic 2 pin widget to output */ |
| {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| |
| /* Unmute input amps (CD, Line In, Mic 1 & Mic 2) for mixer |
| * widget(nid=0x0B) to support the input path of analog loopback |
| */ |
| /* Note: PASD motherboards uses the Line In 2 as the input for front panel mic (mic 2) */ |
| /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03*/ |
| /* unmute CD */ |
| {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, |
| /* unmute Line In */ |
| {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, |
| /* unmute Mic 1 */ |
| {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| /* unmute Line In 2 (for PASD boards Mic 2) */ |
| {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))}, |
| |
| /* Unmute input amps for the line out paths to support the output path of |
| * analog loopback |
| * the mixers on the output path has 2 inputs, one from the DAC and |
| * one from the mixer |
| */ |
| /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ |
| /* Unmute Front out path */ |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| /* Unmute Surround (used as HP) out path */ |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| /* Unmute C/LFE out path */ |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))}, /* mute */ |
| /* Unmute rear Surround out path */ |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| |
| { } |
| }; |
| |
| static struct hda_verb alc880_w810_init_verbs[] = { |
| /* front channel selector/amp: input 0: DAC: unmuted, (no volume selection) */ |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, |
| |
| /* front channel selector/amp: input 1: capture mix: muted, (no volume selection) */ |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180}, |
| |
| /* front channel selector/amp: output 0: unmuted, max volume */ |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| |
| /* front out pin: muted, (no volume selection) */ |
| {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080}, |
| |
| /* front out pin: NOT headphone enable, out enable, vref disabled */ |
| {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| |
| |
| /* surround channel selector/amp: input 0: DAC: unmuted, (no volume selection) */ |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, |
| |
| /* surround channel selector/amp: input 1: capture mix: muted, (no volume selection) */ |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180}, |
| |
| /* surround channel selector/amp: output 0: unmuted, max volume */ |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| |
| /* surround out pin: muted, (no volume selection) */ |
| {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080}, |
| |
| /* surround out pin: NOT headphone enable, out enable, vref disabled */ |
| {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| |
| |
| /* c/lfe channel selector/amp: input 0: DAC: unmuted, (no volume selection) */ |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, |
| |
| /* c/lfe channel selector/amp: input 1: capture mix: muted, (no volume selection) */ |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0x7180}, |
| |
| /* c/lfe channel selector/amp: output 0: unmuted, max volume */ |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| |
| /* c/lfe out pin: muted, (no volume selection) */ |
| {0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080}, |
| |
| /* c/lfe out pin: NOT headphone enable, out enable, vref disabled */ |
| {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| |
| |
| /* hphone/speaker input selector: front DAC */ |
| {0x13, AC_VERB_SET_CONNECT_SEL, 0x0}, |
| |
| /* hphone/speaker out pin: muted, (no volume selection) */ |
| {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080}, |
| |
| /* hphone/speaker out pin: NOT headphone enable, out enable, vref disabled */ |
| {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| |
| |
| { } |
| }; |
| |
| static int alc_init(struct hda_codec *codec) |
| { |
| struct alc_spec *spec = codec->spec; |
| snd_hda_sequence_write(codec, spec->init_verbs); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| /* |
| * resume |
| */ |
| static int alc_resume(struct hda_codec *codec) |
| { |
| struct alc_spec *spec = codec->spec; |
| int i; |
| |
| alc_init(codec); |
| for (i = 0; i < spec->num_mixers; i++) { |
| snd_hda_resume_ctls(codec, spec->mixers[i]); |
| } |
| if (spec->multiout.dig_out_nid) |
| snd_hda_resume_spdif_out(codec); |
| if (spec->dig_in_nid) |
| snd_hda_resume_spdif_in(codec); |
| |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Analog playback callbacks |
| */ |
| static int alc880_playback_pcm_open(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| snd_pcm_substream_t *substream) |
| { |
| struct alc_spec *spec = codec->spec; |
| return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream); |
| } |
| |
| static int alc880_playback_pcm_prepare(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| unsigned int stream_tag, |
| unsigned int format, |
| snd_pcm_substream_t *substream) |
| { |
| struct alc_spec *spec = codec->spec; |
| return snd_hda_multi_out_analog_prepare(codec, &spec->multiout, stream_tag, |
| format, substream); |
| } |
| |
| static int alc880_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| snd_pcm_substream_t *substream) |
| { |
| struct alc_spec *spec = codec->spec; |
| return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout); |
| } |
| |
| /* |
| * Digital out |
| */ |
| static int alc880_dig_playback_pcm_open(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| snd_pcm_substream_t *substream) |
| { |
| struct alc_spec *spec = codec->spec; |
| return snd_hda_multi_out_dig_open(codec, &spec->multiout); |
| } |
| |
| static int alc880_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| snd_pcm_substream_t *substream) |
| { |
| struct alc_spec *spec = codec->spec; |
| return snd_hda_multi_out_dig_close(codec, &spec->multiout); |
| } |
| |
| /* |
| * Analog capture |
| */ |
| static int alc880_capture_pcm_prepare(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| unsigned int stream_tag, |
| unsigned int format, |
| snd_pcm_substream_t *substream) |
| { |
| struct alc_spec *spec = codec->spec; |
| |
| snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number], |
| stream_tag, 0, format); |
| return 0; |
| } |
| |
| static int alc880_capture_pcm_cleanup(struct hda_pcm_stream *hinfo, |
| struct hda_codec *codec, |
| snd_pcm_substream_t *substream) |
| { |
| struct alc_spec *spec = codec->spec; |
| |
| snd_hda_codec_setup_stream(codec, spec->adc_nids[substream->number], 0, 0, 0); |
| return 0; |
| } |
| |
| |
| /* |
| */ |
| static struct hda_pcm_stream alc880_pcm_analog_playback = { |
| .substreams = 1, |
| .channels_min = 2, |
| .channels_max = 8, |
| .nid = 0x02, /* NID to query formats and rates */ |
| .ops = { |
| .open = alc880_playback_pcm_open, |
| .prepare = alc880_playback_pcm_prepare, |
| .cleanup = alc880_playback_pcm_cleanup |
| }, |
| }; |
| |
| static struct hda_pcm_stream alc880_pcm_analog_capture = { |
| .substreams = 2, |
| .channels_min = 2, |
| .channels_max = 2, |
| .nid = 0x07, /* NID to query formats and rates */ |
| .ops = { |
| .prepare = alc880_capture_pcm_prepare, |
| .cleanup = alc880_capture_pcm_cleanup |
| }, |
| }; |
| |
| static struct hda_pcm_stream alc880_pcm_digital_playback = { |
| .substreams = 1, |
| .channels_min = 2, |
| .channels_max = 2, |
| /* NID is set in alc_build_pcms */ |
| .ops = { |
| .open = alc880_dig_playback_pcm_open, |
| .close = alc880_dig_playback_pcm_close |
| }, |
| }; |
| |
| static struct hda_pcm_stream alc880_pcm_digital_capture = { |
| .substreams = 1, |
| .channels_min = 2, |
| .channels_max = 2, |
| /* NID is set in alc_build_pcms */ |
| }; |
| |
| static int alc_build_pcms(struct hda_codec *codec) |
| { |
| struct alc_spec *spec = codec->spec; |
| struct hda_pcm *info = spec->pcm_rec; |
| int i; |
| |
| codec->num_pcms = 1; |
| codec->pcm_info = info; |
| |
| info->name = spec->stream_name_analog; |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback); |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture); |
| |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = 0; |
| for (i = 0; i < spec->num_channel_mode; i++) { |
| if (spec->channel_mode[i].channels > info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max) { |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = spec->channel_mode[i].channels; |
| } |
| } |
| |
| if (spec->multiout.dig_out_nid || spec->dig_in_nid) { |
| codec->num_pcms++; |
| info++; |
| info->name = spec->stream_name_digital; |
| if (spec->multiout.dig_out_nid) { |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_digital_playback); |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dig_out_nid; |
| } |
| if (spec->dig_in_nid) { |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_digital_capture); |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in_nid; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void alc_free(struct hda_codec *codec) |
| { |
| kfree(codec->spec); |
| } |
| |
| /* |
| */ |
| static struct hda_codec_ops alc_patch_ops = { |
| .build_controls = alc_build_controls, |
| .build_pcms = alc_build_pcms, |
| .init = alc_init, |
| .free = alc_free, |
| #ifdef CONFIG_PM |
| .resume = alc_resume, |
| #endif |
| }; |
| |
| /* |
| */ |
| |
| static struct hda_board_config alc880_cfg_tbl[] = { |
| /* Back 3 jack, front 2 jack */ |
| { .modelname = "3stack", .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe200, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe201, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe202, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe203, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe204, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe205, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe206, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe207, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe208, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe209, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe20a, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe20b, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe20c, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe20d, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe20e, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe20f, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe210, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe211, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe214, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe302, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe303, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe304, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe306, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe307, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe404, .config = ALC880_3ST }, |
| { .pci_vendor = 0x8086, .pci_device = 0xa101, .config = ALC880_3ST }, |
| { .pci_vendor = 0x107b, .pci_device = 0x3031, .config = ALC880_3ST }, |
| { .pci_vendor = 0x107b, .pci_device = 0x4036, .config = ALC880_3ST }, |
| { .pci_vendor = 0x107b, .pci_device = 0x4037, .config = ALC880_3ST }, |
| { .pci_vendor = 0x107b, .pci_device = 0x4038, .config = ALC880_3ST }, |
| { .pci_vendor = 0x107b, .pci_device = 0x4040, .config = ALC880_3ST }, |
| { .pci_vendor = 0x107b, .pci_device = 0x4041, .config = ALC880_3ST }, |
| |
| /* Back 3 jack, front 2 jack (Internal add Aux-In) */ |
| { .pci_vendor = 0x1025, .pci_device = 0xe310, .config = ALC880_3ST }, |
| |
| /* Back 3 jack plus 1 SPDIF out jack, front 2 jack */ |
| { .modelname = "3stack-digout", .config = ALC880_3ST_DIG }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe308, .config = ALC880_3ST_DIG }, |
| |
| /* Back 3 jack plus 1 SPDIF out jack, front 2 jack (Internal add Aux-In)*/ |
| { .pci_vendor = 0x8086, .pci_device = 0xe305, .config = ALC880_3ST_DIG }, |
| { .pci_vendor = 0x8086, .pci_device = 0xd402, .config = ALC880_3ST_DIG }, |
| { .pci_vendor = 0x1025, .pci_device = 0xe309, .config = ALC880_3ST_DIG }, |
| |
| /* Back 5 jack, front 2 jack */ |
| { .modelname = "5stack", .config = ALC880_5ST }, |
| { .pci_vendor = 0x107b, .pci_device = 0x3033, .config = ALC880_5ST }, |
| { .pci_vendor = 0x107b, .pci_device = 0x4039, .config = ALC880_5ST }, |
| { .pci_vendor = 0x107b, .pci_device = 0x3032, .config = ALC880_5ST }, |
| { .pci_vendor = 0x103c, .pci_device = 0x2a09, .config = ALC880_5ST }, |
| |
| /* Back 5 jack plus 1 SPDIF out jack, front 2 jack */ |
| { .modelname = "5stack-digout", .config = ALC880_5ST_DIG }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe224, .config = ALC880_5ST_DIG }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe400, .config = ALC880_5ST_DIG }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe401, .config = ALC880_5ST_DIG }, |
| { .pci_vendor = 0x8086, .pci_device = 0xe402, .config = ALC880_5ST_DIG }, |
| { .pci_vendor = 0x8086, .pci_device = 0xd400, .config = ALC880_5ST_DIG }, |
| { .pci_vendor = 0x8086, .pci_device = 0xd401, .config = ALC880_5ST_DIG }, |
| { .pci_vendor = 0x8086, .pci_device = 0xa100, .config = ALC880_5ST_DIG }, |
| { .pci_vendor = 0x1565, .pci_device = 0x8202, .config = ALC880_5ST_DIG }, |
| |
| { .modelname = "w810", .config = ALC880_W810 }, |
| { .pci_vendor = 0x161f, .pci_device = 0x203d, .config = ALC880_W810 }, |
| |
| {} |
| }; |
| |
| static int patch_alc880(struct hda_codec *codec) |
| { |
| struct alc_spec *spec; |
| int board_config; |
| |
| spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); |
| if (spec == NULL) |
| return -ENOMEM; |
| |
| codec->spec = spec; |
| |
| board_config = snd_hda_check_board_config(codec, alc880_cfg_tbl); |
| if (board_config < 0) { |
| snd_printd(KERN_INFO "hda_codec: Unknown model for ALC880\n"); |
| board_config = ALC880_MINIMAL; |
| } |
| |
| switch (board_config) { |
| case ALC880_W810: |
| spec->mixers[spec->num_mixers] = alc880_w810_base_mixer; |
| spec->num_mixers++; |
| break; |
| case ALC880_5ST: |
| case ALC880_5ST_DIG: |
| spec->mixers[spec->num_mixers] = alc880_five_stack_mixer; |
| spec->num_mixers++; |
| break; |
| default: |
| spec->mixers[spec->num_mixers] = alc880_base_mixer; |
| spec->num_mixers++; |
| break; |
| } |
| |
| switch (board_config) { |
| case ALC880_3ST_DIG: |
| case ALC880_5ST_DIG: |
| case ALC880_W810: |
| spec->multiout.dig_out_nid = ALC880_DIGOUT_NID; |
| break; |
| default: |
| break; |
| } |
| |
| switch (board_config) { |
| case ALC880_3ST: |
| case ALC880_3ST_DIG: |
| case ALC880_5ST: |
| case ALC880_5ST_DIG: |
| case ALC880_W810: |
| spec->front_panel = 1; |
| break; |
| default: |
| break; |
| } |
| |
| switch (board_config) { |
| case ALC880_5ST: |
| case ALC880_5ST_DIG: |
| spec->init_verbs = alc880_init_verbs_five_stack; |
| spec->channel_mode = alc880_fivestack_modes; |
| spec->num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes); |
| break; |
| case ALC880_W810: |
| spec->init_verbs = alc880_w810_init_verbs; |
| spec->channel_mode = alc880_w810_modes; |
| spec->num_channel_mode = ARRAY_SIZE(alc880_w810_modes); |
| break; |
| default: |
| spec->init_verbs = alc880_init_verbs_three_stack; |
| spec->channel_mode = alc880_threestack_modes; |
| spec->num_channel_mode = ARRAY_SIZE(alc880_threestack_modes); |
| break; |
| } |
| |
| spec->stream_name_analog = "ALC880 Analog"; |
| spec->stream_analog_playback = &alc880_pcm_analog_playback; |
| spec->stream_analog_capture = &alc880_pcm_analog_capture; |
| |
| spec->stream_name_digital = "ALC880 Digital"; |
| spec->stream_digital_playback = &alc880_pcm_digital_playback; |
| spec->stream_digital_capture = &alc880_pcm_digital_capture; |
| |
| spec->multiout.max_channels = spec->channel_mode[0].channels; |
| |
| switch (board_config) { |
| case ALC880_W810: |
| spec->multiout.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids); |
| spec->multiout.dac_nids = alc880_w810_dac_nids; |
| // No dedicated headphone socket - it's shared with built-in speakers. |
| break; |
| default: |
| spec->multiout.num_dacs = ARRAY_SIZE(alc880_dac_nids); |
| spec->multiout.dac_nids = alc880_dac_nids; |
| spec->multiout.hp_nid = 0x03; /* rear-surround NID */ |
| break; |
| } |
| |
| spec->input_mux = &alc880_capture_source; |
| spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids); |
| spec->adc_nids = alc880_adc_nids; |
| |
| codec->patch_ops = alc_patch_ops; |
| |
| return 0; |
| } |
| |
| /* |
| * ALC260 support |
| */ |
| |
| /* |
| * This is just place-holder, so there's something for alc_build_pcms to look |
| * at when it calculates the maximum number of channels. ALC260 has no mixer |
| * element which allows changing the channel mode, so the verb list is |
| * never used. |
| */ |
| static struct alc_channel_mode alc260_modes[1] = { |
| { 2, NULL }, |
| }; |
| |
| snd_kcontrol_new_t alc260_base_mixer[] = { |
| HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT), |
| /* use LINE2 for the output */ |
| /* HDA_CODEC_MUTE("Front Playback Switch", 0x0f, 0x0, HDA_OUTPUT), */ |
| HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), |
| HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), |
| HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT), |
| HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT), |
| HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT), |
| HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT), |
| HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT), |
| HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT), |
| HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Headphone Playback Switch", 0x10, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("Mono Playback Switch", 0x11, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Capture Source", |
| .info = alc_mux_enum_info, |
| .get = alc_mux_enum_get, |
| .put = alc_mux_enum_put, |
| }, |
| { } /* end */ |
| }; |
| |
| static struct hda_verb alc260_init_verbs[] = { |
| /* Line In pin widget for input */ |
| {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, |
| /* CD pin widget for input */ |
| {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, |
| /* Mic1 (rear panel) pin widget for input and vref at 80% */ |
| {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, |
| /* Mic2 (front panel) pin widget for input and vref at 80% */ |
| {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, |
| /* LINE-2 is used for line-out in rear */ |
| {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| /* select line-out */ |
| {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, |
| /* LINE-OUT pin */ |
| {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| /* enable HP */ |
| {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| /* enable Mono */ |
| {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| /* unmute amp left and right */ |
| {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, |
| /* set connection select to line in (default select for this ADC) */ |
| {0x04, AC_VERB_SET_CONNECT_SEL, 0x02}, |
| /* unmute Line-Out mixer amp left and right (volume = 0) */ |
| {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* unmute HP mixer amp left and right (volume = 0) */ |
| {0x09, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x10, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080}, |
| /* unmute Mono mixer amp left and right (volume = 0) */ |
| {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| /* mute pin widget amp left and right (no gain on this amp) */ |
| {0x11, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080}, |
| /* mute LINE-2 out */ |
| {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080}, |
| /* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 & Line In 2 = 0x03 */ |
| /* unmute CD */ |
| {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x04 << 8))}, |
| /* unmute Line In */ |
| {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))}, |
| /* unmute Mic */ |
| {0x07, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| /* Amp Indexes: DAC = 0x01 & mixer = 0x00 */ |
| /* Unmute Front out path */ |
| {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x08, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| /* Unmute Headphone out path */ |
| {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x09, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| /* Unmute Mono out path */ |
| {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| { } |
| }; |
| |
| static struct hda_pcm_stream alc260_pcm_analog_playback = { |
| .substreams = 1, |
| .channels_min = 2, |
| .channels_max = 2, |
| .nid = 0x2, |
| }; |
| |
| static struct hda_pcm_stream alc260_pcm_analog_capture = { |
| .substreams = 1, |
| .channels_min = 2, |
| .channels_max = 2, |
| .nid = 0x4, |
| }; |
| |
| static int patch_alc260(struct hda_codec *codec) |
| { |
| struct alc_spec *spec; |
| |
| spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); |
| if (spec == NULL) |
| return -ENOMEM; |
| |
| codec->spec = spec; |
| |
| spec->mixers[spec->num_mixers] = alc260_base_mixer; |
| spec->num_mixers++; |
| |
| spec->init_verbs = alc260_init_verbs; |
| spec->channel_mode = alc260_modes; |
| spec->num_channel_mode = ARRAY_SIZE(alc260_modes); |
| |
| spec->stream_name_analog = "ALC260 Analog"; |
| spec->stream_analog_playback = &alc260_pcm_analog_playback; |
| spec->stream_analog_capture = &alc260_pcm_analog_capture; |
| |
| spec->multiout.max_channels = spec->channel_mode[0].channels; |
| spec->multiout.num_dacs = ARRAY_SIZE(alc260_dac_nids); |
| spec->multiout.dac_nids = alc260_dac_nids; |
| |
| spec->input_mux = &alc260_capture_source; |
| spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids); |
| spec->adc_nids = alc260_adc_nids; |
| |
| codec->patch_ops = alc_patch_ops; |
| |
| return 0; |
| } |
| |
| /* |
| * ALC882 support |
| * |
| * ALC882 is almost identical with ALC880 but has cleaner and more flexible |
| * configuration. Each pin widget can choose any input DACs and a mixer. |
| * Each ADC is connected from a mixer of all inputs. This makes possible |
| * 6-channel independent captures. |
| * |
| * In addition, an independent DAC for the multi-playback (not used in this |
| * driver yet). |
| */ |
| |
| static struct alc_channel_mode alc882_ch_modes[1] = { |
| { 8, NULL } |
| }; |
| |
| static hda_nid_t alc882_dac_nids[4] = { |
| /* front, rear, clfe, rear_surr */ |
| 0x02, 0x03, 0x04, 0x05 |
| }; |
| |
| static hda_nid_t alc882_adc_nids[3] = { |
| /* ADC0-2 */ |
| 0x07, 0x08, 0x09, |
| }; |
| |
| /* input MUX */ |
| /* FIXME: should be a matrix-type input source selection */ |
| |
| static struct hda_input_mux alc882_capture_source = { |
| .num_items = 4, |
| .items = { |
| { "Mic", 0x0 }, |
| { "Front Mic", 0x1 }, |
| { "Line", 0x2 }, |
| { "CD", 0x4 }, |
| }, |
| }; |
| |
| #define alc882_mux_enum_info alc_mux_enum_info |
| #define alc882_mux_enum_get alc_mux_enum_get |
| |
| static int alc882_mux_enum_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) |
| { |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct alc_spec *spec = codec->spec; |
| const struct hda_input_mux *imux = spec->input_mux; |
| unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id); |
| static hda_nid_t capture_mixers[3] = { 0x24, 0x23, 0x22 }; |
| hda_nid_t nid = capture_mixers[adc_idx]; |
| unsigned int *cur_val = &spec->cur_mux[adc_idx]; |
| unsigned int i, idx; |
| |
| idx = ucontrol->value.enumerated.item[0]; |
| if (idx >= imux->num_items) |
| idx = imux->num_items - 1; |
| if (*cur_val == idx && ! codec->in_resume) |
| return 0; |
| for (i = 0; i < imux->num_items; i++) { |
| unsigned int v = (i == idx) ? 0x7000 : 0x7080; |
| snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, |
| v | (imux->items[i].index << 8)); |
| } |
| *cur_val = idx; |
| return 1; |
| } |
| |
| /* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17 |
| * Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b |
| */ |
| static snd_kcontrol_new_t alc882_base_mixer[] = { |
| HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Surround Playback Switch", 0x15, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x16, 1, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x16, 2, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Side Playback Switch", 0x17, 0x0, HDA_OUTPUT), |
| HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), |
| HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), |
| HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), |
| HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), |
| HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), |
| HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), |
| HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), |
| HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT), |
| HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT), |
| HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT), |
| HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT), |
| HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT), |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| /* .name = "Capture Source", */ |
| .name = "Input Source", |
| .count = 3, |
| .info = alc882_mux_enum_info, |
| .get = alc882_mux_enum_get, |
| .put = alc882_mux_enum_put, |
| }, |
| { } /* end */ |
| }; |
| |
| static struct hda_verb alc882_init_verbs[] = { |
| /* Front mixer: unmute input/output amp left and right (volume = 0) */ |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| /* Rear mixer */ |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| /* CLFE mixer */ |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| /* Side mixer */ |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| |
| /* Front Pin: to output mode */ |
| {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| /* Front Pin: mute amp left and right (no volume) */ |
| {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* select Front mixer (0x0c, index 0) */ |
| {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, |
| /* Rear Pin */ |
| {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| /* Rear Pin: mute amp left and right (no volume) */ |
| {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* select Rear mixer (0x0d, index 1) */ |
| {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, |
| /* CLFE Pin */ |
| {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| /* CLFE Pin: mute amp left and right (no volume) */ |
| {0x16, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* select CLFE mixer (0x0e, index 2) */ |
| {0x16, AC_VERB_SET_CONNECT_SEL, 0x02}, |
| /* Side Pin */ |
| {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| /* Side Pin: mute amp left and right (no volume) */ |
| {0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* select Side mixer (0x0f, index 3) */ |
| {0x17, AC_VERB_SET_CONNECT_SEL, 0x03}, |
| /* Headphone Pin */ |
| {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40}, |
| /* Headphone Pin: mute amp left and right (no volume) */ |
| {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0x0000}, |
| /* select Front mixer (0x0c, index 0) */ |
| {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, |
| /* Mic (rear) pin widget for input and vref at 80% */ |
| {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, |
| /* Front Mic pin widget for input and vref at 80% */ |
| {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, |
| /* Line In pin widget for input */ |
| {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, |
| /* CD pin widget for input */ |
| {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20}, |
| |
| /* FIXME: use matrix-type input source selection */ |
| /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ |
| /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */ |
| {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, |
| {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, |
| {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, |
| /* Input mixer2 */ |
| {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, |
| {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, |
| {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, |
| /* Input mixer3 */ |
| {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))}, |
| {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x03 << 8))}, |
| {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8))}, |
| {0x22, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x04 << 8))}, |
| /* ADC1: unmute amp left and right */ |
| {0x07, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, |
| /* ADC2: unmute amp left and right */ |
| {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, |
| /* ADC3: unmute amp left and right */ |
| {0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0x7000}, |
| |
| /* Unmute front loopback */ |
| {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| /* Unmute rear loopback */ |
| {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| /* Mute CLFE loopback */ |
| {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8))}, |
| /* Unmute side loopback */ |
| {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))}, |
| |
| { } |
| }; |
| |
| static int patch_alc882(struct hda_codec *codec) |
| { |
| struct alc_spec *spec; |
| |
| spec = kcalloc(1, sizeof(*spec), GFP_KERNEL); |
| if (spec == NULL) |
| return -ENOMEM; |
| |
| codec->spec = spec; |
| |
| spec->mixers[spec->num_mixers] = alc882_base_mixer; |
| spec->num_mixers++; |
| |
| spec->multiout.dig_out_nid = ALC880_DIGOUT_NID; |
| spec->dig_in_nid = ALC880_DIGIN_NID; |
| spec->front_panel = 1; |
| spec->init_verbs = alc882_init_verbs; |
| spec->channel_mode = alc882_ch_modes; |
| spec->num_channel_mode = ARRAY_SIZE(alc882_ch_modes); |
| |
| spec->stream_name_analog = "ALC882 Analog"; |
| spec->stream_analog_playback = &alc880_pcm_analog_playback; |
| spec->stream_analog_capture = &alc880_pcm_analog_capture; |
| |
| spec->stream_name_digital = "ALC882 Digital"; |
| spec->stream_digital_playback = &alc880_pcm_digital_playback; |
| spec->stream_digital_capture = &alc880_pcm_digital_capture; |
| |
| spec->multiout.max_channels = spec->channel_mode[0].channels; |
| spec->multiout.num_dacs = ARRAY_SIZE(alc882_dac_nids); |
| spec->multiout.dac_nids = alc882_dac_nids; |
| |
| spec->input_mux = &alc882_capture_source; |
| spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids); |
| spec->adc_nids = alc882_adc_nids; |
| |
| codec->patch_ops = alc_patch_ops; |
| |
| return 0; |
| } |
| |
| /* |
| * patch entries |
| */ |
| struct hda_codec_preset snd_hda_preset_realtek[] = { |
| { .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 }, |
| { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 }, |
| { .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 }, |
| {} /* terminator */ |
| }; |