| /* |
| * AMD Geode definitions |
| * Copyright (C) 2006, Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of version 2 of the GNU General Public License |
| * as published by the Free Software Foundation. |
| */ |
| |
| #ifndef _ASM_X86_GEODE_H |
| #define _ASM_X86_GEODE_H |
| |
| #include <asm/processor.h> |
| #include <linux/io.h> |
| #include <linux/cs5535.h> |
| |
| /* Generic southbridge functions */ |
| |
| #define GEODE_DEV_PMS 0 |
| #define GEODE_DEV_ACPI 1 |
| #define GEODE_DEV_GPIO 2 |
| #define GEODE_DEV_MFGPT 3 |
| |
| extern int geode_get_dev_base(unsigned int dev); |
| |
| /* Useful macros */ |
| #define geode_pms_base() geode_get_dev_base(GEODE_DEV_PMS) |
| #define geode_acpi_base() geode_get_dev_base(GEODE_DEV_ACPI) |
| #define geode_gpio_base() geode_get_dev_base(GEODE_DEV_GPIO) |
| #define geode_mfgpt_base() geode_get_dev_base(GEODE_DEV_MFGPT) |
| |
| /* MSRS */ |
| |
| #define MSR_GLIU_P2D_RO0 0x10000029 |
| |
| #define MSR_LX_GLD_MSR_CONFIG 0x48002001 |
| #define MSR_LX_MSR_PADSEL 0x48002011 /* NOT 0x48000011; the data |
| * sheet has the wrong value */ |
| #define MSR_GLCP_SYS_RSTPLL 0x4C000014 |
| #define MSR_GLCP_DOTPLL 0x4C000015 |
| |
| #define MSR_LBAR_SMB 0x5140000B |
| #define MSR_LBAR_GPIO 0x5140000C |
| #define MSR_LBAR_MFGPT 0x5140000D |
| #define MSR_LBAR_ACPI 0x5140000E |
| #define MSR_LBAR_PMS 0x5140000F |
| |
| #define MSR_DIVIL_SOFT_RESET 0x51400017 |
| |
| #define MSR_LX_SPARE_MSR 0x80000011 /* DC-specific */ |
| |
| #define MSR_GX_GLD_MSR_CONFIG 0xC0002001 |
| #define MSR_GX_MSR_PADSEL 0xC0002011 |
| |
| /* Resource Sizes */ |
| |
| #define LBAR_GPIO_SIZE 0xFF |
| #define LBAR_MFGPT_SIZE 0x40 |
| #define LBAR_ACPI_SIZE 0x40 |
| #define LBAR_PMS_SIZE 0x80 |
| |
| /* ACPI registers (PMS block) */ |
| |
| /* |
| * PM1_EN is only valid when VSA is enabled for 16 bit reads. |
| * When VSA is not enabled, *always* read both PM1_STS and PM1_EN |
| * with a 32 bit read at offset 0x0 |
| */ |
| |
| #define PM1_STS 0x00 |
| #define PM1_EN 0x02 |
| #define PM1_CNT 0x08 |
| #define PM2_CNT 0x0C |
| #define PM_TMR 0x10 |
| #define PM_GPE0_STS 0x18 |
| #define PM_GPE0_EN 0x1C |
| |
| /* PMC registers (PMS block) */ |
| |
| #define PM_SSD 0x00 |
| #define PM_SCXA 0x04 |
| #define PM_SCYA 0x08 |
| #define PM_OUT_SLPCTL 0x0C |
| #define PM_SCLK 0x10 |
| #define PM_SED 0x1 |
| #define PM_SCXD 0x18 |
| #define PM_SCYD 0x1C |
| #define PM_IN_SLPCTL 0x20 |
| #define PM_WKD 0x30 |
| #define PM_WKXD 0x34 |
| #define PM_RD 0x38 |
| #define PM_WKXA 0x3C |
| #define PM_FSD 0x40 |
| #define PM_TSD 0x44 |
| #define PM_PSD 0x48 |
| #define PM_NWKD 0x4C |
| #define PM_AWKD 0x50 |
| #define PM_SSC 0x54 |
| |
| /* VSA2 magic values */ |
| |
| #define VSA_VRC_INDEX 0xAC1C |
| #define VSA_VRC_DATA 0xAC1E |
| #define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */ |
| #define VSA_VR_SIGNATURE 0x0003 |
| #define VSA_VR_MEM_SIZE 0x0200 |
| #define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */ |
| #define GSW_VSA_SIG 0x534d /* General Software signature */ |
| |
| static inline u32 geode_gpio(unsigned int nr) |
| { |
| BUG_ON(nr > 28); |
| return 1 << nr; |
| } |
| |
| extern void geode_gpio_set(u32, unsigned int); |
| extern void geode_gpio_clear(u32, unsigned int); |
| extern int geode_gpio_isset(u32, unsigned int); |
| extern void geode_gpio_setup_event(unsigned int, int, int); |
| extern void geode_gpio_set_irq(unsigned int, unsigned int); |
| |
| static inline void geode_gpio_event_irq(unsigned int gpio, int pair) |
| { |
| geode_gpio_setup_event(gpio, pair, 0); |
| } |
| |
| static inline void geode_gpio_event_pme(unsigned int gpio, int pair) |
| { |
| geode_gpio_setup_event(gpio, pair, 1); |
| } |
| |
| /* Specific geode tests */ |
| |
| static inline int is_geode_gx(void) |
| { |
| return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) && |
| (boot_cpu_data.x86 == 5) && |
| (boot_cpu_data.x86_model == 5)); |
| } |
| |
| static inline int is_geode_lx(void) |
| { |
| return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && |
| (boot_cpu_data.x86 == 5) && |
| (boot_cpu_data.x86_model == 10)); |
| } |
| |
| static inline int is_geode(void) |
| { |
| return (is_geode_gx() || is_geode_lx()); |
| } |
| |
| #ifdef CONFIG_MGEODE_LX |
| extern int geode_has_vsa2(void); |
| #else |
| static inline int geode_has_vsa2(void) |
| { |
| return 0; |
| } |
| #endif |
| |
| static inline void geode_mfgpt_write(int timer, u16 reg, u16 value) |
| { |
| u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); |
| outw(value, base + reg + (timer * 8)); |
| } |
| |
| static inline u16 geode_mfgpt_read(int timer, u16 reg) |
| { |
| u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); |
| return inw(base + reg + (timer * 8)); |
| } |
| |
| extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable); |
| extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable); |
| extern int geode_mfgpt_alloc_timer(int timer, int domain); |
| |
| #define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1) |
| #define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0) |
| |
| #ifdef CONFIG_GEODE_MFGPT_TIMER |
| extern int __init mfgpt_timer_setup(void); |
| #else |
| static inline int mfgpt_timer_setup(void) { return 0; } |
| #endif |
| |
| #endif /* _ASM_X86_GEODE_H */ |