| /* |
| * Driver for the PN544 NFC chip. |
| * |
| * Copyright (C) Nokia Corporation |
| * |
| * Author: Jari Vanhala <ext-jari.vanhala@nokia.com> |
| * Contact: Matti Aaltonen <matti.j.aaltonen@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/completion.h> |
| #include <linux/crc-ccitt.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/miscdevice.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/nfc/pn544.h> |
| #include <linux/poll.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/serial_core.h> /* for TCGETS */ |
| #include <linux/slab.h> |
| |
| #define DRIVER_CARD "PN544 NFC" |
| #define DRIVER_DESC "NFC driver for PN544" |
| |
| static struct i2c_device_id pn544_id_table[] = { |
| { PN544_DRIVER_NAME, 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, pn544_id_table); |
| |
| #define HCI_MODE 0 |
| #define FW_MODE 1 |
| |
| enum pn544_state { |
| PN544_ST_COLD, |
| PN544_ST_FW_READY, |
| PN544_ST_READY, |
| }; |
| |
| enum pn544_irq { |
| PN544_NONE, |
| PN544_INT, |
| }; |
| |
| struct pn544_info { |
| struct miscdevice miscdev; |
| struct i2c_client *i2c_dev; |
| struct regulator_bulk_data regs[3]; |
| |
| enum pn544_state state; |
| wait_queue_head_t read_wait; |
| loff_t read_offset; |
| enum pn544_irq read_irq; |
| struct mutex read_mutex; /* Serialize read_irq access */ |
| struct mutex mutex; /* Serialize info struct access */ |
| u8 *buf; |
| size_t buflen; |
| }; |
| |
| static const char reg_vdd_io[] = "Vdd_IO"; |
| static const char reg_vbat[] = "VBat"; |
| static const char reg_vsim[] = "VSim"; |
| |
| /* sysfs interface */ |
| static ssize_t pn544_test(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct pn544_info *info = dev_get_drvdata(dev); |
| struct i2c_client *client = info->i2c_dev; |
| struct pn544_nfc_platform_data *pdata = client->dev.platform_data; |
| |
| return snprintf(buf, PAGE_SIZE, "%d\n", pdata->test()); |
| } |
| |
| static int pn544_enable(struct pn544_info *info, int mode) |
| { |
| struct pn544_nfc_platform_data *pdata; |
| struct i2c_client *client = info->i2c_dev; |
| |
| int r; |
| |
| r = regulator_bulk_enable(ARRAY_SIZE(info->regs), info->regs); |
| if (r < 0) |
| return r; |
| |
| pdata = client->dev.platform_data; |
| info->read_irq = PN544_NONE; |
| if (pdata->enable) |
| pdata->enable(mode); |
| |
| if (mode) { |
| info->state = PN544_ST_FW_READY; |
| dev_dbg(&client->dev, "now in FW-mode\n"); |
| } else { |
| info->state = PN544_ST_READY; |
| dev_dbg(&client->dev, "now in HCI-mode\n"); |
| } |
| |
| usleep_range(10000, 15000); |
| |
| return 0; |
| } |
| |
| static void pn544_disable(struct pn544_info *info) |
| { |
| struct pn544_nfc_platform_data *pdata; |
| struct i2c_client *client = info->i2c_dev; |
| |
| pdata = client->dev.platform_data; |
| if (pdata->disable) |
| pdata->disable(); |
| |
| info->state = PN544_ST_COLD; |
| |
| dev_dbg(&client->dev, "Now in OFF-mode\n"); |
| |
| msleep(PN544_RESETVEN_TIME); |
| |
| info->read_irq = PN544_NONE; |
| regulator_bulk_disable(ARRAY_SIZE(info->regs), info->regs); |
| } |
| |
| static int check_crc(u8 *buf, int buflen) |
| { |
| u8 len; |
| u16 crc; |
| |
| len = buf[0] + 1; |
| if (len < 4 || len != buflen || len > PN544_MSG_MAX_SIZE) { |
| pr_err(PN544_DRIVER_NAME |
| ": CRC; corrupt packet len %u (%d)\n", len, buflen); |
| print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, |
| 16, 2, buf, buflen, false); |
| return -EPERM; |
| } |
| crc = crc_ccitt(0xffff, buf, len - 2); |
| crc = ~crc; |
| |
| if (buf[len-2] != (crc & 0xff) || buf[len-1] != (crc >> 8)) { |
| pr_err(PN544_DRIVER_NAME ": CRC error 0x%x != 0x%x 0x%x\n", |
| crc, buf[len-1], buf[len-2]); |
| |
| print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE, |
| 16, 2, buf, buflen, false); |
| return -EPERM; |
| } |
| return 0; |
| } |
| |
| static int pn544_i2c_write(struct i2c_client *client, u8 *buf, int len) |
| { |
| int r; |
| |
| if (len < 4 || len != (buf[0] + 1)) { |
| dev_err(&client->dev, "%s: Illegal message length: %d\n", |
| __func__, len); |
| return -EINVAL; |
| } |
| |
| if (check_crc(buf, len)) |
| return -EINVAL; |
| |
| usleep_range(3000, 6000); |
| |
| r = i2c_master_send(client, buf, len); |
| dev_dbg(&client->dev, "send: %d\n", r); |
| |
| if (r == -EREMOTEIO) { /* Retry, chip was in standby */ |
| usleep_range(6000, 10000); |
| r = i2c_master_send(client, buf, len); |
| dev_dbg(&client->dev, "send2: %d\n", r); |
| } |
| |
| if (r != len) |
| return -EREMOTEIO; |
| |
| return r; |
| } |
| |
| static int pn544_i2c_read(struct i2c_client *client, u8 *buf, int buflen) |
| { |
| int r; |
| u8 len; |
| |
| /* |
| * You could read a packet in one go, but then you'd need to read |
| * max size and rest would be 0xff fill, so we do split reads. |
| */ |
| r = i2c_master_recv(client, &len, 1); |
| dev_dbg(&client->dev, "recv1: %d\n", r); |
| |
| if (r != 1) |
| return -EREMOTEIO; |
| |
| if (len < PN544_LLC_HCI_OVERHEAD) |
| len = PN544_LLC_HCI_OVERHEAD; |
| else if (len > (PN544_MSG_MAX_SIZE - 1)) |
| len = PN544_MSG_MAX_SIZE - 1; |
| |
| if (1 + len > buflen) /* len+(data+crc16) */ |
| return -EMSGSIZE; |
| |
| buf[0] = len; |
| |
| r = i2c_master_recv(client, buf + 1, len); |
| dev_dbg(&client->dev, "recv2: %d\n", r); |
| |
| if (r != len) |
| return -EREMOTEIO; |
| |
| usleep_range(3000, 6000); |
| |
| return r + 1; |
| } |
| |
| static int pn544_fw_write(struct i2c_client *client, u8 *buf, int len) |
| { |
| int r; |
| |
| dev_dbg(&client->dev, "%s\n", __func__); |
| |
| if (len < PN544_FW_HEADER_SIZE || |
| (PN544_FW_HEADER_SIZE + (buf[1] << 8) + buf[2]) != len) |
| return -EINVAL; |
| |
| r = i2c_master_send(client, buf, len); |
| dev_dbg(&client->dev, "fw send: %d\n", r); |
| |
| if (r == -EREMOTEIO) { /* Retry, chip was in standby */ |
| usleep_range(6000, 10000); |
| r = i2c_master_send(client, buf, len); |
| dev_dbg(&client->dev, "fw send2: %d\n", r); |
| } |
| |
| if (r != len) |
| return -EREMOTEIO; |
| |
| return r; |
| } |
| |
| static int pn544_fw_read(struct i2c_client *client, u8 *buf, int buflen) |
| { |
| int r, len; |
| |
| if (buflen < PN544_FW_HEADER_SIZE) |
| return -EINVAL; |
| |
| r = i2c_master_recv(client, buf, PN544_FW_HEADER_SIZE); |
| dev_dbg(&client->dev, "FW recv1: %d\n", r); |
| |
| if (r < 0) |
| return r; |
| |
| if (r < PN544_FW_HEADER_SIZE) |
| return -EINVAL; |
| |
| len = (buf[1] << 8) + buf[2]; |
| if (len == 0) /* just header, no additional data */ |
| return r; |
| |
| if (len > buflen - PN544_FW_HEADER_SIZE) |
| return -EMSGSIZE; |
| |
| r = i2c_master_recv(client, buf + PN544_FW_HEADER_SIZE, len); |
| dev_dbg(&client->dev, "fw recv2: %d\n", r); |
| |
| if (r != len) |
| return -EINVAL; |
| |
| return r + PN544_FW_HEADER_SIZE; |
| } |
| |
| static irqreturn_t pn544_irq_thread_fn(int irq, void *dev_id) |
| { |
| struct pn544_info *info = dev_id; |
| struct i2c_client *client = info->i2c_dev; |
| |
| BUG_ON(!info); |
| BUG_ON(irq != info->i2c_dev->irq); |
| |
| dev_dbg(&client->dev, "IRQ\n"); |
| |
| mutex_lock(&info->read_mutex); |
| info->read_irq = PN544_INT; |
| mutex_unlock(&info->read_mutex); |
| |
| wake_up_interruptible(&info->read_wait); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static enum pn544_irq pn544_irq_state(struct pn544_info *info) |
| { |
| enum pn544_irq irq; |
| |
| mutex_lock(&info->read_mutex); |
| irq = info->read_irq; |
| mutex_unlock(&info->read_mutex); |
| /* |
| * XXX: should we check GPIO-line status directly? |
| * return pdata->irq_status() ? PN544_INT : PN544_NONE; |
| */ |
| |
| return irq; |
| } |
| |
| static ssize_t pn544_read(struct file *file, char __user *buf, |
| size_t count, loff_t *offset) |
| { |
| struct pn544_info *info = container_of(file->private_data, |
| struct pn544_info, miscdev); |
| struct i2c_client *client = info->i2c_dev; |
| enum pn544_irq irq; |
| size_t len; |
| int r = 0; |
| |
| dev_dbg(&client->dev, "%s: info: %p, count: %zu\n", __func__, |
| info, count); |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->state == PN544_ST_COLD) { |
| r = -ENODEV; |
| goto out; |
| } |
| |
| irq = pn544_irq_state(info); |
| if (irq == PN544_NONE) { |
| if (file->f_flags & O_NONBLOCK) { |
| r = -EAGAIN; |
| goto out; |
| } |
| |
| if (wait_event_interruptible(info->read_wait, |
| (info->read_irq == PN544_INT))) { |
| r = -ERESTARTSYS; |
| goto out; |
| } |
| } |
| |
| if (info->state == PN544_ST_FW_READY) { |
| len = min(count, info->buflen); |
| |
| mutex_lock(&info->read_mutex); |
| r = pn544_fw_read(info->i2c_dev, info->buf, len); |
| info->read_irq = PN544_NONE; |
| mutex_unlock(&info->read_mutex); |
| |
| if (r < 0) { |
| dev_err(&info->i2c_dev->dev, "FW read failed: %d\n", r); |
| goto out; |
| } |
| |
| print_hex_dump(KERN_DEBUG, "FW read: ", DUMP_PREFIX_NONE, |
| 16, 2, info->buf, r, false); |
| |
| *offset += r; |
| if (copy_to_user(buf, info->buf, r)) { |
| r = -EFAULT; |
| goto out; |
| } |
| } else { |
| len = min(count, info->buflen); |
| |
| mutex_lock(&info->read_mutex); |
| r = pn544_i2c_read(info->i2c_dev, info->buf, len); |
| info->read_irq = PN544_NONE; |
| mutex_unlock(&info->read_mutex); |
| |
| if (r < 0) { |
| dev_err(&info->i2c_dev->dev, "read failed (%d)\n", r); |
| goto out; |
| } |
| print_hex_dump(KERN_DEBUG, "read: ", DUMP_PREFIX_NONE, |
| 16, 2, info->buf, r, false); |
| |
| *offset += r; |
| if (copy_to_user(buf, info->buf, r)) { |
| r = -EFAULT; |
| goto out; |
| } |
| } |
| |
| out: |
| mutex_unlock(&info->mutex); |
| |
| return r; |
| } |
| |
| static unsigned int pn544_poll(struct file *file, poll_table *wait) |
| { |
| struct pn544_info *info = container_of(file->private_data, |
| struct pn544_info, miscdev); |
| struct i2c_client *client = info->i2c_dev; |
| int r = 0; |
| |
| dev_dbg(&client->dev, "%s: info: %p\n", __func__, info); |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->state == PN544_ST_COLD) { |
| r = -ENODEV; |
| goto out; |
| } |
| |
| poll_wait(file, &info->read_wait, wait); |
| |
| if (pn544_irq_state(info) == PN544_INT) { |
| r = POLLIN | POLLRDNORM; |
| goto out; |
| } |
| out: |
| mutex_unlock(&info->mutex); |
| |
| return r; |
| } |
| |
| static ssize_t pn544_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct pn544_info *info = container_of(file->private_data, |
| struct pn544_info, miscdev); |
| struct i2c_client *client = info->i2c_dev; |
| ssize_t len; |
| int r; |
| |
| dev_dbg(&client->dev, "%s: info: %p, count %zu\n", __func__, |
| info, count); |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->state == PN544_ST_COLD) { |
| r = -ENODEV; |
| goto out; |
| } |
| |
| /* |
| * XXX: should we detect rset-writes and clean possible |
| * read_irq state |
| */ |
| if (info->state == PN544_ST_FW_READY) { |
| size_t fw_len; |
| |
| if (count < PN544_FW_HEADER_SIZE) { |
| r = -EINVAL; |
| goto out; |
| } |
| |
| len = min(count, info->buflen); |
| if (copy_from_user(info->buf, buf, len)) { |
| r = -EFAULT; |
| goto out; |
| } |
| |
| print_hex_dump(KERN_DEBUG, "FW write: ", DUMP_PREFIX_NONE, |
| 16, 2, info->buf, len, false); |
| |
| fw_len = PN544_FW_HEADER_SIZE + (info->buf[1] << 8) + |
| info->buf[2]; |
| |
| if (len > fw_len) /* 1 msg at a time */ |
| len = fw_len; |
| |
| r = pn544_fw_write(info->i2c_dev, info->buf, len); |
| } else { |
| if (count < PN544_LLC_MIN_SIZE) { |
| r = -EINVAL; |
| goto out; |
| } |
| |
| len = min(count, info->buflen); |
| if (copy_from_user(info->buf, buf, len)) { |
| r = -EFAULT; |
| goto out; |
| } |
| |
| print_hex_dump(KERN_DEBUG, "write: ", DUMP_PREFIX_NONE, |
| 16, 2, info->buf, len, false); |
| |
| if (len > (info->buf[0] + 1)) /* 1 msg at a time */ |
| len = info->buf[0] + 1; |
| |
| r = pn544_i2c_write(info->i2c_dev, info->buf, len); |
| } |
| out: |
| mutex_unlock(&info->mutex); |
| |
| return r; |
| |
| } |
| |
| static long pn544_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct pn544_info *info = container_of(file->private_data, |
| struct pn544_info, miscdev); |
| struct i2c_client *client = info->i2c_dev; |
| struct pn544_nfc_platform_data *pdata; |
| unsigned int val; |
| int r = 0; |
| |
| dev_dbg(&client->dev, "%s: info: %p, cmd: 0x%x\n", __func__, info, cmd); |
| |
| mutex_lock(&info->mutex); |
| |
| if (info->state == PN544_ST_COLD) { |
| r = -ENODEV; |
| goto out; |
| } |
| |
| pdata = info->i2c_dev->dev.platform_data; |
| switch (cmd) { |
| case PN544_GET_FW_MODE: |
| dev_dbg(&client->dev, "%s: PN544_GET_FW_MODE\n", __func__); |
| |
| val = (info->state == PN544_ST_FW_READY); |
| if (copy_to_user((void __user *)arg, &val, sizeof(val))) { |
| r = -EFAULT; |
| goto out; |
| } |
| |
| break; |
| |
| case PN544_SET_FW_MODE: |
| dev_dbg(&client->dev, "%s: PN544_SET_FW_MODE\n", __func__); |
| |
| if (copy_from_user(&val, (void __user *)arg, sizeof(val))) { |
| r = -EFAULT; |
| goto out; |
| } |
| |
| if (val) { |
| if (info->state == PN544_ST_FW_READY) |
| break; |
| |
| pn544_disable(info); |
| r = pn544_enable(info, FW_MODE); |
| if (r < 0) |
| goto out; |
| } else { |
| if (info->state == PN544_ST_READY) |
| break; |
| pn544_disable(info); |
| r = pn544_enable(info, HCI_MODE); |
| if (r < 0) |
| goto out; |
| } |
| file->f_pos = info->read_offset; |
| break; |
| |
| case TCGETS: |
| dev_dbg(&client->dev, "%s: TCGETS\n", __func__); |
| |
| r = -ENOIOCTLCMD; |
| break; |
| |
| default: |
| dev_err(&client->dev, "Unknown ioctl 0x%x\n", cmd); |
| r = -ENOIOCTLCMD; |
| break; |
| } |
| |
| out: |
| mutex_unlock(&info->mutex); |
| |
| return r; |
| } |
| |
| static int pn544_open(struct inode *inode, struct file *file) |
| { |
| struct pn544_info *info = container_of(file->private_data, |
| struct pn544_info, miscdev); |
| struct i2c_client *client = info->i2c_dev; |
| int r = 0; |
| |
| dev_dbg(&client->dev, "%s: info: %p, client %p\n", __func__, |
| info, info->i2c_dev); |
| |
| mutex_lock(&info->mutex); |
| |
| /* |
| * Only 1 at a time. |
| * XXX: maybe user (counter) would work better |
| */ |
| if (info->state != PN544_ST_COLD) { |
| r = -EBUSY; |
| goto out; |
| } |
| |
| file->f_pos = info->read_offset; |
| r = pn544_enable(info, HCI_MODE); |
| |
| out: |
| mutex_unlock(&info->mutex); |
| return r; |
| } |
| |
| static int pn544_close(struct inode *inode, struct file *file) |
| { |
| struct pn544_info *info = container_of(file->private_data, |
| struct pn544_info, miscdev); |
| struct i2c_client *client = info->i2c_dev; |
| |
| dev_dbg(&client->dev, "%s: info: %p, client %p\n", |
| __func__, info, info->i2c_dev); |
| |
| mutex_lock(&info->mutex); |
| pn544_disable(info); |
| mutex_unlock(&info->mutex); |
| |
| return 0; |
| } |
| |
| static const struct file_operations pn544_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .read = pn544_read, |
| .write = pn544_write, |
| .poll = pn544_poll, |
| .open = pn544_open, |
| .release = pn544_close, |
| .unlocked_ioctl = pn544_ioctl, |
| }; |
| |
| #ifdef CONFIG_PM |
| static int pn544_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct pn544_info *info; |
| int r = 0; |
| |
| dev_info(&client->dev, "***\n%s: client %p\n***\n", __func__, client); |
| |
| info = i2c_get_clientdata(client); |
| dev_info(&client->dev, "%s: info: %p, client %p\n", __func__, |
| info, client); |
| |
| mutex_lock(&info->mutex); |
| |
| switch (info->state) { |
| case PN544_ST_FW_READY: |
| /* Do not suspend while upgrading FW, please! */ |
| r = -EPERM; |
| break; |
| |
| case PN544_ST_READY: |
| /* |
| * CHECK: Device should be in standby-mode. No way to check? |
| * Allowing low power mode for the regulator is potentially |
| * dangerous if pn544 does not go to suspension. |
| */ |
| break; |
| |
| case PN544_ST_COLD: |
| break; |
| }; |
| |
| mutex_unlock(&info->mutex); |
| return r; |
| } |
| |
| static int pn544_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct pn544_info *info = i2c_get_clientdata(client); |
| int r = 0; |
| |
| dev_dbg(&client->dev, "%s: info: %p, client %p\n", __func__, |
| info, client); |
| |
| mutex_lock(&info->mutex); |
| |
| switch (info->state) { |
| case PN544_ST_READY: |
| /* |
| * CHECK: If regulator low power mode is allowed in |
| * pn544_suspend, we should go back to normal mode |
| * here. |
| */ |
| break; |
| |
| case PN544_ST_COLD: |
| break; |
| |
| case PN544_ST_FW_READY: |
| break; |
| }; |
| |
| mutex_unlock(&info->mutex); |
| |
| return r; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(pn544_pm_ops, pn544_suspend, pn544_resume); |
| #endif |
| |
| static struct device_attribute pn544_attr = |
| __ATTR(nfc_test, S_IRUGO, pn544_test, NULL); |
| |
| static int __devinit pn544_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct pn544_info *info; |
| struct pn544_nfc_platform_data *pdata; |
| int r = 0; |
| |
| dev_dbg(&client->dev, "%s\n", __func__); |
| dev_dbg(&client->dev, "IRQ: %d\n", client->irq); |
| |
| /* private data allocation */ |
| info = kzalloc(sizeof(struct pn544_info), GFP_KERNEL); |
| if (!info) { |
| dev_err(&client->dev, |
| "Cannot allocate memory for pn544_info.\n"); |
| r = -ENOMEM; |
| goto err_info_alloc; |
| } |
| |
| info->buflen = max(PN544_MSG_MAX_SIZE, PN544_MAX_I2C_TRANSFER); |
| info->buf = kzalloc(info->buflen, GFP_KERNEL); |
| if (!info->buf) { |
| dev_err(&client->dev, |
| "Cannot allocate memory for pn544_info->buf.\n"); |
| r = -ENOMEM; |
| goto err_buf_alloc; |
| } |
| |
| info->regs[0].supply = reg_vdd_io; |
| info->regs[1].supply = reg_vbat; |
| info->regs[2].supply = reg_vsim; |
| r = regulator_bulk_get(&client->dev, ARRAY_SIZE(info->regs), |
| info->regs); |
| if (r < 0) |
| goto err_kmalloc; |
| |
| info->i2c_dev = client; |
| info->state = PN544_ST_COLD; |
| info->read_irq = PN544_NONE; |
| mutex_init(&info->read_mutex); |
| mutex_init(&info->mutex); |
| init_waitqueue_head(&info->read_wait); |
| i2c_set_clientdata(client, info); |
| pdata = client->dev.platform_data; |
| if (!pdata) { |
| dev_err(&client->dev, "No platform data\n"); |
| r = -EINVAL; |
| goto err_reg; |
| } |
| |
| if (!pdata->request_resources) { |
| dev_err(&client->dev, "request_resources() missing\n"); |
| r = -EINVAL; |
| goto err_reg; |
| } |
| |
| r = pdata->request_resources(client); |
| if (r) { |
| dev_err(&client->dev, "Cannot get platform resources\n"); |
| goto err_reg; |
| } |
| |
| r = request_threaded_irq(client->irq, NULL, pn544_irq_thread_fn, |
| IRQF_TRIGGER_RISING, PN544_DRIVER_NAME, |
| info); |
| if (r < 0) { |
| dev_err(&client->dev, "Unable to register IRQ handler\n"); |
| goto err_res; |
| } |
| |
| /* If we don't have the test we don't need the sysfs file */ |
| if (pdata->test) { |
| r = device_create_file(&client->dev, &pn544_attr); |
| if (r) { |
| dev_err(&client->dev, |
| "sysfs registration failed, error %d\n", r); |
| goto err_irq; |
| } |
| } |
| |
| info->miscdev.minor = MISC_DYNAMIC_MINOR; |
| info->miscdev.name = PN544_DRIVER_NAME; |
| info->miscdev.fops = &pn544_fops; |
| info->miscdev.parent = &client->dev; |
| r = misc_register(&info->miscdev); |
| if (r < 0) { |
| dev_err(&client->dev, "Device registration failed\n"); |
| goto err_sysfs; |
| } |
| |
| dev_dbg(&client->dev, "%s: info: %p, pdata %p, client %p\n", |
| __func__, info, pdata, client); |
| |
| return 0; |
| |
| err_sysfs: |
| if (pdata->test) |
| device_remove_file(&client->dev, &pn544_attr); |
| err_irq: |
| free_irq(client->irq, info); |
| err_res: |
| if (pdata->free_resources) |
| pdata->free_resources(); |
| err_reg: |
| regulator_bulk_free(ARRAY_SIZE(info->regs), info->regs); |
| err_kmalloc: |
| kfree(info->buf); |
| err_buf_alloc: |
| kfree(info); |
| err_info_alloc: |
| return r; |
| } |
| |
| static __devexit int pn544_remove(struct i2c_client *client) |
| { |
| struct pn544_info *info = i2c_get_clientdata(client); |
| struct pn544_nfc_platform_data *pdata = client->dev.platform_data; |
| |
| dev_dbg(&client->dev, "%s\n", __func__); |
| |
| misc_deregister(&info->miscdev); |
| if (pdata->test) |
| device_remove_file(&client->dev, &pn544_attr); |
| |
| if (info->state != PN544_ST_COLD) { |
| if (pdata->disable) |
| pdata->disable(); |
| |
| info->read_irq = PN544_NONE; |
| } |
| |
| free_irq(client->irq, info); |
| if (pdata->free_resources) |
| pdata->free_resources(); |
| |
| regulator_bulk_free(ARRAY_SIZE(info->regs), info->regs); |
| kfree(info->buf); |
| kfree(info); |
| |
| return 0; |
| } |
| |
| static struct i2c_driver pn544_driver = { |
| .driver = { |
| .name = PN544_DRIVER_NAME, |
| #ifdef CONFIG_PM |
| .pm = &pn544_pm_ops, |
| #endif |
| }, |
| .probe = pn544_probe, |
| .id_table = pn544_id_table, |
| .remove = __devexit_p(pn544_remove), |
| }; |
| |
| static int __init pn544_init(void) |
| { |
| int r; |
| |
| pr_debug(DRIVER_DESC ": %s\n", __func__); |
| |
| r = i2c_add_driver(&pn544_driver); |
| if (r) { |
| pr_err(PN544_DRIVER_NAME ": driver registration failed\n"); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit pn544_exit(void) |
| { |
| i2c_del_driver(&pn544_driver); |
| pr_info(DRIVER_DESC ", Exiting.\n"); |
| } |
| |
| module_init(pn544_init); |
| module_exit(pn544_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |