| /* |
| * linux/ipc/sem.c |
| * Copyright (C) 1992 Krishna Balasubramanian |
| * Copyright (C) 1995 Eric Schenk, Bruno Haible |
| * |
| * /proc/sysvipc/sem support (c) 1999 Dragos Acostachioaie <dragos@iname.com> |
| * |
| * SMP-threaded, sysctl's added |
| * (c) 1999 Manfred Spraul <manfred@colorfullife.com> |
| * Enforced range limit on SEM_UNDO |
| * (c) 2001 Red Hat Inc |
| * Lockless wakeup |
| * (c) 2003 Manfred Spraul <manfred@colorfullife.com> |
| * Further wakeup optimizations, documentation |
| * (c) 2010 Manfred Spraul <manfred@colorfullife.com> |
| * |
| * support for audit of ipc object properties and permission changes |
| * Dustin Kirkland <dustin.kirkland@us.ibm.com> |
| * |
| * namespaces support |
| * OpenVZ, SWsoft Inc. |
| * Pavel Emelianov <xemul@openvz.org> |
| * |
| * Implementation notes: (May 2010) |
| * This file implements System V semaphores. |
| * |
| * User space visible behavior: |
| * - FIFO ordering for semop() operations (just FIFO, not starvation |
| * protection) |
| * - multiple semaphore operations that alter the same semaphore in |
| * one semop() are handled. |
| * - sem_ctime (time of last semctl()) is updated in the IPC_SET, SETVAL and |
| * SETALL calls. |
| * - two Linux specific semctl() commands: SEM_STAT, SEM_INFO. |
| * - undo adjustments at process exit are limited to 0..SEMVMX. |
| * - namespace are supported. |
| * - SEMMSL, SEMMNS, SEMOPM and SEMMNI can be configured at runtine by writing |
| * to /proc/sys/kernel/sem. |
| * - statistics about the usage are reported in /proc/sysvipc/sem. |
| * |
| * Internals: |
| * - scalability: |
| * - all global variables are read-mostly. |
| * - semop() calls and semctl(RMID) are synchronized by RCU. |
| * - most operations do write operations (actually: spin_lock calls) to |
| * the per-semaphore array structure. |
| * Thus: Perfect SMP scaling between independent semaphore arrays. |
| * If multiple semaphores in one array are used, then cache line |
| * trashing on the semaphore array spinlock will limit the scaling. |
| * - semncnt and semzcnt are calculated on demand in count_semncnt() and |
| * count_semzcnt() |
| * - the task that performs a successful semop() scans the list of all |
| * sleeping tasks and completes any pending operations that can be fulfilled. |
| * Semaphores are actively given to waiting tasks (necessary for FIFO). |
| * (see update_queue()) |
| * - To improve the scalability, the actual wake-up calls are performed after |
| * dropping all locks. (see wake_up_sem_queue_prepare(), |
| * wake_up_sem_queue_do()) |
| * - All work is done by the waker, the woken up task does not have to do |
| * anything - not even acquiring a lock or dropping a refcount. |
| * - A woken up task may not even touch the semaphore array anymore, it may |
| * have been destroyed already by a semctl(RMID). |
| * - The synchronizations between wake-ups due to a timeout/signal and a |
| * wake-up due to a completed semaphore operation is achieved by using an |
| * intermediate state (IN_WAKEUP). |
| * - UNDO values are stored in an array (one per process and per |
| * semaphore array, lazily allocated). For backwards compatibility, multiple |
| * modes for the UNDO variables are supported (per process, per thread) |
| * (see copy_semundo, CLONE_SYSVSEM) |
| * - There are two lists of the pending operations: a per-array list |
| * and per-semaphore list (stored in the array). This allows to achieve FIFO |
| * ordering without always scanning all pending operations. |
| * The worst-case behavior is nevertheless O(N^2) for N wakeups. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/init.h> |
| #include <linux/proc_fs.h> |
| #include <linux/time.h> |
| #include <linux/security.h> |
| #include <linux/syscalls.h> |
| #include <linux/audit.h> |
| #include <linux/capability.h> |
| #include <linux/seq_file.h> |
| #include <linux/rwsem.h> |
| #include <linux/nsproxy.h> |
| #include <linux/ipc_namespace.h> |
| |
| #include <asm/uaccess.h> |
| #include "util.h" |
| |
| /* One semaphore structure for each semaphore in the system. */ |
| struct sem { |
| int semval; /* current value */ |
| int sempid; /* pid of last operation */ |
| spinlock_t lock; /* spinlock for fine-grained semtimedop */ |
| struct list_head sem_pending; /* pending single-sop operations */ |
| }; |
| |
| /* One queue for each sleeping process in the system. */ |
| struct sem_queue { |
| struct list_head list; /* queue of pending operations */ |
| struct task_struct *sleeper; /* this process */ |
| struct sem_undo *undo; /* undo structure */ |
| int pid; /* process id of requesting process */ |
| int status; /* completion status of operation */ |
| struct sembuf *sops; /* array of pending operations */ |
| int nsops; /* number of operations */ |
| int alter; /* does *sops alter the array? */ |
| }; |
| |
| /* Each task has a list of undo requests. They are executed automatically |
| * when the process exits. |
| */ |
| struct sem_undo { |
| struct list_head list_proc; /* per-process list: * |
| * all undos from one process |
| * rcu protected */ |
| struct rcu_head rcu; /* rcu struct for sem_undo */ |
| struct sem_undo_list *ulp; /* back ptr to sem_undo_list */ |
| struct list_head list_id; /* per semaphore array list: |
| * all undos for one array */ |
| int semid; /* semaphore set identifier */ |
| short *semadj; /* array of adjustments */ |
| /* one per semaphore */ |
| }; |
| |
| /* sem_undo_list controls shared access to the list of sem_undo structures |
| * that may be shared among all a CLONE_SYSVSEM task group. |
| */ |
| struct sem_undo_list { |
| atomic_t refcnt; |
| spinlock_t lock; |
| struct list_head list_proc; |
| }; |
| |
| |
| #define sem_ids(ns) ((ns)->ids[IPC_SEM_IDS]) |
| |
| #define sem_checkid(sma, semid) ipc_checkid(&sma->sem_perm, semid) |
| |
| static int newary(struct ipc_namespace *, struct ipc_params *); |
| static void freeary(struct ipc_namespace *, struct kern_ipc_perm *); |
| #ifdef CONFIG_PROC_FS |
| static int sysvipc_sem_proc_show(struct seq_file *s, void *it); |
| #endif |
| |
| #define SEMMSL_FAST 256 /* 512 bytes on stack */ |
| #define SEMOPM_FAST 64 /* ~ 372 bytes on stack */ |
| |
| /* |
| * linked list protection: |
| * sem_undo.id_next, |
| * sem_array.sem_pending{,last}, |
| * sem_array.sem_undo: sem_lock() for read/write |
| * sem_undo.proc_next: only "current" is allowed to read/write that field. |
| * |
| */ |
| |
| #define sc_semmsl sem_ctls[0] |
| #define sc_semmns sem_ctls[1] |
| #define sc_semopm sem_ctls[2] |
| #define sc_semmni sem_ctls[3] |
| |
| void sem_init_ns(struct ipc_namespace *ns) |
| { |
| ns->sc_semmsl = SEMMSL; |
| ns->sc_semmns = SEMMNS; |
| ns->sc_semopm = SEMOPM; |
| ns->sc_semmni = SEMMNI; |
| ns->used_sems = 0; |
| ipc_init_ids(&ns->ids[IPC_SEM_IDS]); |
| } |
| |
| #ifdef CONFIG_IPC_NS |
| void sem_exit_ns(struct ipc_namespace *ns) |
| { |
| free_ipcs(ns, &sem_ids(ns), freeary); |
| idr_destroy(&ns->ids[IPC_SEM_IDS].ipcs_idr); |
| } |
| #endif |
| |
| void __init sem_init (void) |
| { |
| sem_init_ns(&init_ipc_ns); |
| ipc_init_proc_interface("sysvipc/sem", |
| " key semid perms nsems uid gid cuid cgid otime ctime\n", |
| IPC_SEM_IDS, sysvipc_sem_proc_show); |
| } |
| |
| /* |
| * If the request contains only one semaphore operation, and there are |
| * no complex transactions pending, lock only the semaphore involved. |
| * Otherwise, lock the entire semaphore array, since we either have |
| * multiple semaphores in our own semops, or we need to look at |
| * semaphores from other pending complex operations. |
| * |
| * Carefully guard against sma->complex_count changing between zero |
| * and non-zero while we are spinning for the lock. The value of |
| * sma->complex_count cannot change while we are holding the lock, |
| * so sem_unlock should be fine. |
| * |
| * The global lock path checks that all the local locks have been released, |
| * checking each local lock once. This means that the local lock paths |
| * cannot start their critical sections while the global lock is held. |
| */ |
| static inline int sem_lock(struct sem_array *sma, struct sembuf *sops, |
| int nsops) |
| { |
| int locknum; |
| again: |
| if (nsops == 1 && !sma->complex_count) { |
| struct sem *sem = sma->sem_base + sops->sem_num; |
| |
| /* Lock just the semaphore we are interested in. */ |
| spin_lock(&sem->lock); |
| |
| /* |
| * If sma->complex_count was set while we were spinning, |
| * we may need to look at things we did not lock here. |
| */ |
| if (unlikely(sma->complex_count)) { |
| spin_unlock(&sem->lock); |
| goto lock_array; |
| } |
| |
| /* |
| * Another process is holding the global lock on the |
| * sem_array; we cannot enter our critical section, |
| * but have to wait for the global lock to be released. |
| */ |
| if (unlikely(spin_is_locked(&sma->sem_perm.lock))) { |
| spin_unlock(&sem->lock); |
| spin_unlock_wait(&sma->sem_perm.lock); |
| goto again; |
| } |
| |
| locknum = sops->sem_num; |
| } else { |
| int i; |
| /* |
| * Lock the semaphore array, and wait for all of the |
| * individual semaphore locks to go away. The code |
| * above ensures no new single-lock holders will enter |
| * their critical section while the array lock is held. |
| */ |
| lock_array: |
| spin_lock(&sma->sem_perm.lock); |
| for (i = 0; i < sma->sem_nsems; i++) { |
| struct sem *sem = sma->sem_base + i; |
| spin_unlock_wait(&sem->lock); |
| } |
| locknum = -1; |
| } |
| return locknum; |
| } |
| |
| static inline void sem_unlock(struct sem_array *sma, int locknum) |
| { |
| if (locknum == -1) { |
| spin_unlock(&sma->sem_perm.lock); |
| } else { |
| struct sem *sem = sma->sem_base + locknum; |
| spin_unlock(&sem->lock); |
| } |
| rcu_read_unlock(); |
| } |
| |
| /* |
| * sem_lock_(check_) routines are called in the paths where the rw_mutex |
| * is not held. |
| */ |
| static inline struct sem_array *sem_obtain_lock(struct ipc_namespace *ns, |
| int id, struct sembuf *sops, int nsops, int *locknum) |
| { |
| struct kern_ipc_perm *ipcp; |
| struct sem_array *sma; |
| |
| rcu_read_lock(); |
| ipcp = ipc_obtain_object(&sem_ids(ns), id); |
| if (IS_ERR(ipcp)) { |
| sma = ERR_CAST(ipcp); |
| goto err; |
| } |
| |
| sma = container_of(ipcp, struct sem_array, sem_perm); |
| *locknum = sem_lock(sma, sops, nsops); |
| |
| /* ipc_rmid() may have already freed the ID while sem_lock |
| * was spinning: verify that the structure is still valid |
| */ |
| if (!ipcp->deleted) |
| return container_of(ipcp, struct sem_array, sem_perm); |
| |
| sem_unlock(sma, *locknum); |
| sma = ERR_PTR(-EINVAL); |
| err: |
| rcu_read_unlock(); |
| return sma; |
| } |
| |
| static inline struct sem_array *sem_obtain_object(struct ipc_namespace *ns, int id) |
| { |
| struct kern_ipc_perm *ipcp = ipc_obtain_object(&sem_ids(ns), id); |
| |
| if (IS_ERR(ipcp)) |
| return ERR_CAST(ipcp); |
| |
| return container_of(ipcp, struct sem_array, sem_perm); |
| } |
| |
| static inline struct sem_array *sem_obtain_object_check(struct ipc_namespace *ns, |
| int id) |
| { |
| struct kern_ipc_perm *ipcp = ipc_obtain_object_check(&sem_ids(ns), id); |
| |
| if (IS_ERR(ipcp)) |
| return ERR_CAST(ipcp); |
| |
| return container_of(ipcp, struct sem_array, sem_perm); |
| } |
| |
| static inline void sem_lock_and_putref(struct sem_array *sma) |
| { |
| rcu_read_lock(); |
| sem_lock(sma, NULL, -1); |
| ipc_rcu_putref(sma); |
| } |
| |
| static inline void sem_putref(struct sem_array *sma) |
| { |
| sem_lock_and_putref(sma); |
| sem_unlock(sma, -1); |
| } |
| |
| static inline void sem_rmid(struct ipc_namespace *ns, struct sem_array *s) |
| { |
| ipc_rmid(&sem_ids(ns), &s->sem_perm); |
| } |
| |
| /* |
| * Lockless wakeup algorithm: |
| * Without the check/retry algorithm a lockless wakeup is possible: |
| * - queue.status is initialized to -EINTR before blocking. |
| * - wakeup is performed by |
| * * unlinking the queue entry from sma->sem_pending |
| * * setting queue.status to IN_WAKEUP |
| * This is the notification for the blocked thread that a |
| * result value is imminent. |
| * * call wake_up_process |
| * * set queue.status to the final value. |
| * - the previously blocked thread checks queue.status: |
| * * if it's IN_WAKEUP, then it must wait until the value changes |
| * * if it's not -EINTR, then the operation was completed by |
| * update_queue. semtimedop can return queue.status without |
| * performing any operation on the sem array. |
| * * otherwise it must acquire the spinlock and check what's up. |
| * |
| * The two-stage algorithm is necessary to protect against the following |
| * races: |
| * - if queue.status is set after wake_up_process, then the woken up idle |
| * thread could race forward and try (and fail) to acquire sma->lock |
| * before update_queue had a chance to set queue.status |
| * - if queue.status is written before wake_up_process and if the |
| * blocked process is woken up by a signal between writing |
| * queue.status and the wake_up_process, then the woken up |
| * process could return from semtimedop and die by calling |
| * sys_exit before wake_up_process is called. Then wake_up_process |
| * will oops, because the task structure is already invalid. |
| * (yes, this happened on s390 with sysv msg). |
| * |
| */ |
| #define IN_WAKEUP 1 |
| |
| /** |
| * newary - Create a new semaphore set |
| * @ns: namespace |
| * @params: ptr to the structure that contains key, semflg and nsems |
| * |
| * Called with sem_ids.rw_mutex held (as a writer) |
| */ |
| |
| static int newary(struct ipc_namespace *ns, struct ipc_params *params) |
| { |
| int id; |
| int retval; |
| struct sem_array *sma; |
| int size; |
| key_t key = params->key; |
| int nsems = params->u.nsems; |
| int semflg = params->flg; |
| int i; |
| |
| if (!nsems) |
| return -EINVAL; |
| if (ns->used_sems + nsems > ns->sc_semmns) |
| return -ENOSPC; |
| |
| size = sizeof (*sma) + nsems * sizeof (struct sem); |
| sma = ipc_rcu_alloc(size); |
| if (!sma) { |
| return -ENOMEM; |
| } |
| memset (sma, 0, size); |
| |
| sma->sem_perm.mode = (semflg & S_IRWXUGO); |
| sma->sem_perm.key = key; |
| |
| sma->sem_perm.security = NULL; |
| retval = security_sem_alloc(sma); |
| if (retval) { |
| ipc_rcu_putref(sma); |
| return retval; |
| } |
| |
| id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni); |
| if (id < 0) { |
| security_sem_free(sma); |
| ipc_rcu_putref(sma); |
| return id; |
| } |
| ns->used_sems += nsems; |
| |
| sma->sem_base = (struct sem *) &sma[1]; |
| |
| for (i = 0; i < nsems; i++) { |
| INIT_LIST_HEAD(&sma->sem_base[i].sem_pending); |
| spin_lock_init(&sma->sem_base[i].lock); |
| } |
| |
| sma->complex_count = 0; |
| INIT_LIST_HEAD(&sma->sem_pending); |
| INIT_LIST_HEAD(&sma->list_id); |
| sma->sem_nsems = nsems; |
| sma->sem_ctime = get_seconds(); |
| sem_unlock(sma, -1); |
| |
| return sma->sem_perm.id; |
| } |
| |
| |
| /* |
| * Called with sem_ids.rw_mutex and ipcp locked. |
| */ |
| static inline int sem_security(struct kern_ipc_perm *ipcp, int semflg) |
| { |
| struct sem_array *sma; |
| |
| sma = container_of(ipcp, struct sem_array, sem_perm); |
| return security_sem_associate(sma, semflg); |
| } |
| |
| /* |
| * Called with sem_ids.rw_mutex and ipcp locked. |
| */ |
| static inline int sem_more_checks(struct kern_ipc_perm *ipcp, |
| struct ipc_params *params) |
| { |
| struct sem_array *sma; |
| |
| sma = container_of(ipcp, struct sem_array, sem_perm); |
| if (params->u.nsems > sma->sem_nsems) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| SYSCALL_DEFINE3(semget, key_t, key, int, nsems, int, semflg) |
| { |
| struct ipc_namespace *ns; |
| struct ipc_ops sem_ops; |
| struct ipc_params sem_params; |
| |
| ns = current->nsproxy->ipc_ns; |
| |
| if (nsems < 0 || nsems > ns->sc_semmsl) |
| return -EINVAL; |
| |
| sem_ops.getnew = newary; |
| sem_ops.associate = sem_security; |
| sem_ops.more_checks = sem_more_checks; |
| |
| sem_params.key = key; |
| sem_params.flg = semflg; |
| sem_params.u.nsems = nsems; |
| |
| return ipcget(ns, &sem_ids(ns), &sem_ops, &sem_params); |
| } |
| |
| /* |
| * Determine whether a sequence of semaphore operations would succeed |
| * all at once. Return 0 if yes, 1 if need to sleep, else return error code. |
| */ |
| |
| static int try_atomic_semop (struct sem_array * sma, struct sembuf * sops, |
| int nsops, struct sem_undo *un, int pid) |
| { |
| int result, sem_op; |
| struct sembuf *sop; |
| struct sem * curr; |
| |
| for (sop = sops; sop < sops + nsops; sop++) { |
| curr = sma->sem_base + sop->sem_num; |
| sem_op = sop->sem_op; |
| result = curr->semval; |
| |
| if (!sem_op && result) |
| goto would_block; |
| |
| result += sem_op; |
| if (result < 0) |
| goto would_block; |
| if (result > SEMVMX) |
| goto out_of_range; |
| if (sop->sem_flg & SEM_UNDO) { |
| int undo = un->semadj[sop->sem_num] - sem_op; |
| /* |
| * Exceeding the undo range is an error. |
| */ |
| if (undo < (-SEMAEM - 1) || undo > SEMAEM) |
| goto out_of_range; |
| } |
| curr->semval = result; |
| } |
| |
| sop--; |
| while (sop >= sops) { |
| sma->sem_base[sop->sem_num].sempid = pid; |
| if (sop->sem_flg & SEM_UNDO) |
| un->semadj[sop->sem_num] -= sop->sem_op; |
| sop--; |
| } |
| |
| return 0; |
| |
| out_of_range: |
| result = -ERANGE; |
| goto undo; |
| |
| would_block: |
| if (sop->sem_flg & IPC_NOWAIT) |
| result = -EAGAIN; |
| else |
| result = 1; |
| |
| undo: |
| sop--; |
| while (sop >= sops) { |
| sma->sem_base[sop->sem_num].semval -= sop->sem_op; |
| sop--; |
| } |
| |
| return result; |
| } |
| |
| /** wake_up_sem_queue_prepare(q, error): Prepare wake-up |
| * @q: queue entry that must be signaled |
| * @error: Error value for the signal |
| * |
| * Prepare the wake-up of the queue entry q. |
| */ |
| static void wake_up_sem_queue_prepare(struct list_head *pt, |
| struct sem_queue *q, int error) |
| { |
| if (list_empty(pt)) { |
| /* |
| * Hold preempt off so that we don't get preempted and have the |
| * wakee busy-wait until we're scheduled back on. |
| */ |
| preempt_disable(); |
| } |
| q->status = IN_WAKEUP; |
| q->pid = error; |
| |
| list_add_tail(&q->list, pt); |
| } |
| |
| /** |
| * wake_up_sem_queue_do(pt) - do the actual wake-up |
| * @pt: list of tasks to be woken up |
| * |
| * Do the actual wake-up. |
| * The function is called without any locks held, thus the semaphore array |
| * could be destroyed already and the tasks can disappear as soon as the |
| * status is set to the actual return code. |
| */ |
| static void wake_up_sem_queue_do(struct list_head *pt) |
| { |
| struct sem_queue *q, *t; |
| int did_something; |
| |
| did_something = !list_empty(pt); |
| list_for_each_entry_safe(q, t, pt, list) { |
| wake_up_process(q->sleeper); |
| /* q can disappear immediately after writing q->status. */ |
| smp_wmb(); |
| q->status = q->pid; |
| } |
| if (did_something) |
| preempt_enable(); |
| } |
| |
| static void unlink_queue(struct sem_array *sma, struct sem_queue *q) |
| { |
| list_del(&q->list); |
| if (q->nsops > 1) |
| sma->complex_count--; |
| } |
| |
| /** check_restart(sma, q) |
| * @sma: semaphore array |
| * @q: the operation that just completed |
| * |
| * update_queue is O(N^2) when it restarts scanning the whole queue of |
| * waiting operations. Therefore this function checks if the restart is |
| * really necessary. It is called after a previously waiting operation |
| * was completed. |
| */ |
| static int check_restart(struct sem_array *sma, struct sem_queue *q) |
| { |
| struct sem *curr; |
| struct sem_queue *h; |
| |
| /* if the operation didn't modify the array, then no restart */ |
| if (q->alter == 0) |
| return 0; |
| |
| /* pending complex operations are too difficult to analyse */ |
| if (sma->complex_count) |
| return 1; |
| |
| /* we were a sleeping complex operation. Too difficult */ |
| if (q->nsops > 1) |
| return 1; |
| |
| curr = sma->sem_base + q->sops[0].sem_num; |
| |
| /* No-one waits on this queue */ |
| if (list_empty(&curr->sem_pending)) |
| return 0; |
| |
| /* the new semaphore value */ |
| if (curr->semval) { |
| /* It is impossible that someone waits for the new value: |
| * - q is a previously sleeping simple operation that |
| * altered the array. It must be a decrement, because |
| * simple increments never sleep. |
| * - The value is not 0, thus wait-for-zero won't proceed. |
| * - If there are older (higher priority) decrements |
| * in the queue, then they have observed the original |
| * semval value and couldn't proceed. The operation |
| * decremented to value - thus they won't proceed either. |
| */ |
| BUG_ON(q->sops[0].sem_op >= 0); |
| return 0; |
| } |
| /* |
| * semval is 0. Check if there are wait-for-zero semops. |
| * They must be the first entries in the per-semaphore queue |
| */ |
| h = list_first_entry(&curr->sem_pending, struct sem_queue, list); |
| BUG_ON(h->nsops != 1); |
| BUG_ON(h->sops[0].sem_num != q->sops[0].sem_num); |
| |
| /* Yes, there is a wait-for-zero semop. Restart */ |
| if (h->sops[0].sem_op == 0) |
| return 1; |
| |
| /* Again - no-one is waiting for the new value. */ |
| return 0; |
| } |
| |
| |
| /** |
| * update_queue(sma, semnum): Look for tasks that can be completed. |
| * @sma: semaphore array. |
| * @semnum: semaphore that was modified. |
| * @pt: list head for the tasks that must be woken up. |
| * |
| * update_queue must be called after a semaphore in a semaphore array |
| * was modified. If multiple semaphores were modified, update_queue must |
| * be called with semnum = -1, as well as with the number of each modified |
| * semaphore. |
| * The tasks that must be woken up are added to @pt. The return code |
| * is stored in q->pid. |
| * The function return 1 if at least one semop was completed successfully. |
| */ |
| static int update_queue(struct sem_array *sma, int semnum, struct list_head *pt) |
| { |
| struct sem_queue *q; |
| struct list_head *walk; |
| struct list_head *pending_list; |
| int semop_completed = 0; |
| |
| if (semnum == -1) |
| pending_list = &sma->sem_pending; |
| else |
| pending_list = &sma->sem_base[semnum].sem_pending; |
| |
| again: |
| walk = pending_list->next; |
| while (walk != pending_list) { |
| int error, restart; |
| |
| q = container_of(walk, struct sem_queue, list); |
| walk = walk->next; |
| |
| /* If we are scanning the single sop, per-semaphore list of |
| * one semaphore and that semaphore is 0, then it is not |
| * necessary to scan the "alter" entries: simple increments |
| * that affect only one entry succeed immediately and cannot |
| * be in the per semaphore pending queue, and decrements |
| * cannot be successful if the value is already 0. |
| */ |
| if (semnum != -1 && sma->sem_base[semnum].semval == 0 && |
| q->alter) |
| break; |
| |
| error = try_atomic_semop(sma, q->sops, q->nsops, |
| q->undo, q->pid); |
| |
| /* Does q->sleeper still need to sleep? */ |
| if (error > 0) |
| continue; |
| |
| unlink_queue(sma, q); |
| |
| if (error) { |
| restart = 0; |
| } else { |
| semop_completed = 1; |
| restart = check_restart(sma, q); |
| } |
| |
| wake_up_sem_queue_prepare(pt, q, error); |
| if (restart) |
| goto again; |
| } |
| return semop_completed; |
| } |
| |
| /** |
| * do_smart_update(sma, sops, nsops, otime, pt) - optimized update_queue |
| * @sma: semaphore array |
| * @sops: operations that were performed |
| * @nsops: number of operations |
| * @otime: force setting otime |
| * @pt: list head of the tasks that must be woken up. |
| * |
| * do_smart_update() does the required called to update_queue, based on the |
| * actual changes that were performed on the semaphore array. |
| * Note that the function does not do the actual wake-up: the caller is |
| * responsible for calling wake_up_sem_queue_do(@pt). |
| * It is safe to perform this call after dropping all locks. |
| */ |
| static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsops, |
| int otime, struct list_head *pt) |
| { |
| int i; |
| |
| if (sma->complex_count || sops == NULL) { |
| if (update_queue(sma, -1, pt)) |
| otime = 1; |
| } |
| |
| if (!sops) { |
| /* No semops; something special is going on. */ |
| for (i = 0; i < sma->sem_nsems; i++) { |
| if (update_queue(sma, i, pt)) |
| otime = 1; |
| } |
| goto done; |
| } |
| |
| /* Check the semaphores that were modified. */ |
| for (i = 0; i < nsops; i++) { |
| if (sops[i].sem_op > 0 || |
| (sops[i].sem_op < 0 && |
| sma->sem_base[sops[i].sem_num].semval == 0)) |
| if (update_queue(sma, sops[i].sem_num, pt)) |
| otime = 1; |
| } |
| done: |
| if (otime) |
| sma->sem_otime = get_seconds(); |
| } |
| |
| |
| /* The following counts are associated to each semaphore: |
| * semncnt number of tasks waiting on semval being nonzero |
| * semzcnt number of tasks waiting on semval being zero |
| * This model assumes that a task waits on exactly one semaphore. |
| * Since semaphore operations are to be performed atomically, tasks actually |
| * wait on a whole sequence of semaphores simultaneously. |
| * The counts we return here are a rough approximation, but still |
| * warrant that semncnt+semzcnt>0 if the task is on the pending queue. |
| */ |
| static int count_semncnt (struct sem_array * sma, ushort semnum) |
| { |
| int semncnt; |
| struct sem_queue * q; |
| |
| semncnt = 0; |
| list_for_each_entry(q, &sma->sem_pending, list) { |
| struct sembuf * sops = q->sops; |
| int nsops = q->nsops; |
| int i; |
| for (i = 0; i < nsops; i++) |
| if (sops[i].sem_num == semnum |
| && (sops[i].sem_op < 0) |
| && !(sops[i].sem_flg & IPC_NOWAIT)) |
| semncnt++; |
| } |
| return semncnt; |
| } |
| |
| static int count_semzcnt (struct sem_array * sma, ushort semnum) |
| { |
| int semzcnt; |
| struct sem_queue * q; |
| |
| semzcnt = 0; |
| list_for_each_entry(q, &sma->sem_pending, list) { |
| struct sembuf * sops = q->sops; |
| int nsops = q->nsops; |
| int i; |
| for (i = 0; i < nsops; i++) |
| if (sops[i].sem_num == semnum |
| && (sops[i].sem_op == 0) |
| && !(sops[i].sem_flg & IPC_NOWAIT)) |
| semzcnt++; |
| } |
| return semzcnt; |
| } |
| |
| /* Free a semaphore set. freeary() is called with sem_ids.rw_mutex locked |
| * as a writer and the spinlock for this semaphore set hold. sem_ids.rw_mutex |
| * remains locked on exit. |
| */ |
| static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp) |
| { |
| struct sem_undo *un, *tu; |
| struct sem_queue *q, *tq; |
| struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm); |
| struct list_head tasks; |
| int i; |
| |
| /* Free the existing undo structures for this semaphore set. */ |
| assert_spin_locked(&sma->sem_perm.lock); |
| list_for_each_entry_safe(un, tu, &sma->list_id, list_id) { |
| list_del(&un->list_id); |
| spin_lock(&un->ulp->lock); |
| un->semid = -1; |
| list_del_rcu(&un->list_proc); |
| spin_unlock(&un->ulp->lock); |
| kfree_rcu(un, rcu); |
| } |
| |
| /* Wake up all pending processes and let them fail with EIDRM. */ |
| INIT_LIST_HEAD(&tasks); |
| list_for_each_entry_safe(q, tq, &sma->sem_pending, list) { |
| unlink_queue(sma, q); |
| wake_up_sem_queue_prepare(&tasks, q, -EIDRM); |
| } |
| for (i = 0; i < sma->sem_nsems; i++) { |
| struct sem *sem = sma->sem_base + i; |
| list_for_each_entry_safe(q, tq, &sem->sem_pending, list) { |
| unlink_queue(sma, q); |
| wake_up_sem_queue_prepare(&tasks, q, -EIDRM); |
| } |
| } |
| |
| /* Remove the semaphore set from the IDR */ |
| sem_rmid(ns, sma); |
| sem_unlock(sma, -1); |
| |
| wake_up_sem_queue_do(&tasks); |
| ns->used_sems -= sma->sem_nsems; |
| security_sem_free(sma); |
| ipc_rcu_putref(sma); |
| } |
| |
| static unsigned long copy_semid_to_user(void __user *buf, struct semid64_ds *in, int version) |
| { |
| switch(version) { |
| case IPC_64: |
| return copy_to_user(buf, in, sizeof(*in)); |
| case IPC_OLD: |
| { |
| struct semid_ds out; |
| |
| memset(&out, 0, sizeof(out)); |
| |
| ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm); |
| |
| out.sem_otime = in->sem_otime; |
| out.sem_ctime = in->sem_ctime; |
| out.sem_nsems = in->sem_nsems; |
| |
| return copy_to_user(buf, &out, sizeof(out)); |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int semctl_nolock(struct ipc_namespace *ns, int semid, |
| int cmd, int version, void __user *p) |
| { |
| int err; |
| struct sem_array *sma; |
| |
| switch(cmd) { |
| case IPC_INFO: |
| case SEM_INFO: |
| { |
| struct seminfo seminfo; |
| int max_id; |
| |
| err = security_sem_semctl(NULL, cmd); |
| if (err) |
| return err; |
| |
| memset(&seminfo,0,sizeof(seminfo)); |
| seminfo.semmni = ns->sc_semmni; |
| seminfo.semmns = ns->sc_semmns; |
| seminfo.semmsl = ns->sc_semmsl; |
| seminfo.semopm = ns->sc_semopm; |
| seminfo.semvmx = SEMVMX; |
| seminfo.semmnu = SEMMNU; |
| seminfo.semmap = SEMMAP; |
| seminfo.semume = SEMUME; |
| down_read(&sem_ids(ns).rw_mutex); |
| if (cmd == SEM_INFO) { |
| seminfo.semusz = sem_ids(ns).in_use; |
| seminfo.semaem = ns->used_sems; |
| } else { |
| seminfo.semusz = SEMUSZ; |
| seminfo.semaem = SEMAEM; |
| } |
| max_id = ipc_get_maxid(&sem_ids(ns)); |
| up_read(&sem_ids(ns).rw_mutex); |
| if (copy_to_user(p, &seminfo, sizeof(struct seminfo))) |
| return -EFAULT; |
| return (max_id < 0) ? 0: max_id; |
| } |
| case IPC_STAT: |
| case SEM_STAT: |
| { |
| struct semid64_ds tbuf; |
| int id = 0; |
| |
| memset(&tbuf, 0, sizeof(tbuf)); |
| |
| if (cmd == SEM_STAT) { |
| rcu_read_lock(); |
| sma = sem_obtain_object(ns, semid); |
| if (IS_ERR(sma)) { |
| err = PTR_ERR(sma); |
| goto out_unlock; |
| } |
| id = sma->sem_perm.id; |
| } else { |
| rcu_read_lock(); |
| sma = sem_obtain_object_check(ns, semid); |
| if (IS_ERR(sma)) { |
| err = PTR_ERR(sma); |
| goto out_unlock; |
| } |
| } |
| |
| err = -EACCES; |
| if (ipcperms(ns, &sma->sem_perm, S_IRUGO)) |
| goto out_unlock; |
| |
| err = security_sem_semctl(sma, cmd); |
| if (err) |
| goto out_unlock; |
| |
| kernel_to_ipc64_perm(&sma->sem_perm, &tbuf.sem_perm); |
| tbuf.sem_otime = sma->sem_otime; |
| tbuf.sem_ctime = sma->sem_ctime; |
| tbuf.sem_nsems = sma->sem_nsems; |
| rcu_read_unlock(); |
| if (copy_semid_to_user(p, &tbuf, version)) |
| return -EFAULT; |
| return id; |
| } |
| default: |
| return -EINVAL; |
| } |
| out_unlock: |
| rcu_read_unlock(); |
| return err; |
| } |
| |
| static int semctl_setval(struct ipc_namespace *ns, int semid, int semnum, |
| unsigned long arg) |
| { |
| struct sem_undo *un; |
| struct sem_array *sma; |
| struct sem* curr; |
| int err; |
| struct list_head tasks; |
| int val; |
| #if defined(CONFIG_64BIT) && defined(__BIG_ENDIAN) |
| /* big-endian 64bit */ |
| val = arg >> 32; |
| #else |
| /* 32bit or little-endian 64bit */ |
| val = arg; |
| #endif |
| |
| if (val > SEMVMX || val < 0) |
| return -ERANGE; |
| |
| INIT_LIST_HEAD(&tasks); |
| |
| rcu_read_lock(); |
| sma = sem_obtain_object_check(ns, semid); |
| if (IS_ERR(sma)) { |
| rcu_read_unlock(); |
| return PTR_ERR(sma); |
| } |
| |
| if (semnum < 0 || semnum >= sma->sem_nsems) { |
| rcu_read_unlock(); |
| return -EINVAL; |
| } |
| |
| |
| if (ipcperms(ns, &sma->sem_perm, S_IWUGO)) { |
| rcu_read_unlock(); |
| return -EACCES; |
| } |
| |
| err = security_sem_semctl(sma, SETVAL); |
| if (err) { |
| rcu_read_unlock(); |
| return -EACCES; |
| } |
| |
| sem_lock(sma, NULL, -1); |
| |
| curr = &sma->sem_base[semnum]; |
| |
| assert_spin_locked(&sma->sem_perm.lock); |
| list_for_each_entry(un, &sma->list_id, list_id) |
| un->semadj[semnum] = 0; |
| |
| curr->semval = val; |
| curr->sempid = task_tgid_vnr(current); |
| sma->sem_ctime = get_seconds(); |
| /* maybe some queued-up processes were waiting for this */ |
| do_smart_update(sma, NULL, 0, 0, &tasks); |
| sem_unlock(sma, -1); |
| wake_up_sem_queue_do(&tasks); |
| return 0; |
| } |
| |
| static int semctl_main(struct ipc_namespace *ns, int semid, int semnum, |
| int cmd, void __user *p) |
| { |
| struct sem_array *sma; |
| struct sem* curr; |
| int err, nsems; |
| ushort fast_sem_io[SEMMSL_FAST]; |
| ushort* sem_io = fast_sem_io; |
| struct list_head tasks; |
| |
| INIT_LIST_HEAD(&tasks); |
| |
| rcu_read_lock(); |
| sma = sem_obtain_object_check(ns, semid); |
| if (IS_ERR(sma)) { |
| rcu_read_unlock(); |
| return PTR_ERR(sma); |
| } |
| |
| nsems = sma->sem_nsems; |
| |
| err = -EACCES; |
| if (ipcperms(ns, &sma->sem_perm, |
| cmd == SETALL ? S_IWUGO : S_IRUGO)) { |
| rcu_read_unlock(); |
| goto out_wakeup; |
| } |
| |
| err = security_sem_semctl(sma, cmd); |
| if (err) { |
| rcu_read_unlock(); |
| goto out_wakeup; |
| } |
| |
| err = -EACCES; |
| switch (cmd) { |
| case GETALL: |
| { |
| ushort __user *array = p; |
| int i; |
| |
| sem_lock(sma, NULL, -1); |
| if(nsems > SEMMSL_FAST) { |
| if (!ipc_rcu_getref(sma)) { |
| sem_unlock(sma, -1); |
| err = -EIDRM; |
| goto out_free; |
| } |
| sem_unlock(sma, -1); |
| sem_io = ipc_alloc(sizeof(ushort)*nsems); |
| if(sem_io == NULL) { |
| sem_putref(sma); |
| return -ENOMEM; |
| } |
| |
| sem_lock_and_putref(sma); |
| if (sma->sem_perm.deleted) { |
| sem_unlock(sma, -1); |
| err = -EIDRM; |
| goto out_free; |
| } |
| } |
| for (i = 0; i < sma->sem_nsems; i++) |
| sem_io[i] = sma->sem_base[i].semval; |
| sem_unlock(sma, -1); |
| err = 0; |
| if(copy_to_user(array, sem_io, nsems*sizeof(ushort))) |
| err = -EFAULT; |
| goto out_free; |
| } |
| case SETALL: |
| { |
| int i; |
| struct sem_undo *un; |
| |
| if (!ipc_rcu_getref(sma)) { |
| rcu_read_unlock(); |
| return -EIDRM; |
| } |
| rcu_read_unlock(); |
| |
| if(nsems > SEMMSL_FAST) { |
| sem_io = ipc_alloc(sizeof(ushort)*nsems); |
| if(sem_io == NULL) { |
| sem_putref(sma); |
| return -ENOMEM; |
| } |
| } |
| |
| if (copy_from_user (sem_io, p, nsems*sizeof(ushort))) { |
| sem_putref(sma); |
| err = -EFAULT; |
| goto out_free; |
| } |
| |
| for (i = 0; i < nsems; i++) { |
| if (sem_io[i] > SEMVMX) { |
| sem_putref(sma); |
| err = -ERANGE; |
| goto out_free; |
| } |
| } |
| sem_lock_and_putref(sma); |
| if (sma->sem_perm.deleted) { |
| sem_unlock(sma, -1); |
| err = -EIDRM; |
| goto out_free; |
| } |
| |
| for (i = 0; i < nsems; i++) |
| sma->sem_base[i].semval = sem_io[i]; |
| |
| assert_spin_locked(&sma->sem_perm.lock); |
| list_for_each_entry(un, &sma->list_id, list_id) { |
| for (i = 0; i < nsems; i++) |
| un->semadj[i] = 0; |
| } |
| sma->sem_ctime = get_seconds(); |
| /* maybe some queued-up processes were waiting for this */ |
| do_smart_update(sma, NULL, 0, 0, &tasks); |
| err = 0; |
| goto out_unlock; |
| } |
| /* GETVAL, GETPID, GETNCTN, GETZCNT: fall-through */ |
| } |
| err = -EINVAL; |
| if (semnum < 0 || semnum >= nsems) { |
| rcu_read_unlock(); |
| goto out_wakeup; |
| } |
| |
| sem_lock(sma, NULL, -1); |
| curr = &sma->sem_base[semnum]; |
| |
| switch (cmd) { |
| case GETVAL: |
| err = curr->semval; |
| goto out_unlock; |
| case GETPID: |
| err = curr->sempid; |
| goto out_unlock; |
| case GETNCNT: |
| err = count_semncnt(sma,semnum); |
| goto out_unlock; |
| case GETZCNT: |
| err = count_semzcnt(sma,semnum); |
| goto out_unlock; |
| } |
| |
| out_unlock: |
| sem_unlock(sma, -1); |
| out_wakeup: |
| wake_up_sem_queue_do(&tasks); |
| out_free: |
| if(sem_io != fast_sem_io) |
| ipc_free(sem_io, sizeof(ushort)*nsems); |
| return err; |
| } |
| |
| static inline unsigned long |
| copy_semid_from_user(struct semid64_ds *out, void __user *buf, int version) |
| { |
| switch(version) { |
| case IPC_64: |
| if (copy_from_user(out, buf, sizeof(*out))) |
| return -EFAULT; |
| return 0; |
| case IPC_OLD: |
| { |
| struct semid_ds tbuf_old; |
| |
| if(copy_from_user(&tbuf_old, buf, sizeof(tbuf_old))) |
| return -EFAULT; |
| |
| out->sem_perm.uid = tbuf_old.sem_perm.uid; |
| out->sem_perm.gid = tbuf_old.sem_perm.gid; |
| out->sem_perm.mode = tbuf_old.sem_perm.mode; |
| |
| return 0; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * This function handles some semctl commands which require the rw_mutex |
| * to be held in write mode. |
| * NOTE: no locks must be held, the rw_mutex is taken inside this function. |
| */ |
| static int semctl_down(struct ipc_namespace *ns, int semid, |
| int cmd, int version, void __user *p) |
| { |
| struct sem_array *sma; |
| int err; |
| struct semid64_ds semid64; |
| struct kern_ipc_perm *ipcp; |
| |
| if(cmd == IPC_SET) { |
| if (copy_semid_from_user(&semid64, p, version)) |
| return -EFAULT; |
| } |
| |
| ipcp = ipcctl_pre_down_nolock(ns, &sem_ids(ns), semid, cmd, |
| &semid64.sem_perm, 0); |
| if (IS_ERR(ipcp)) |
| return PTR_ERR(ipcp); |
| |
| sma = container_of(ipcp, struct sem_array, sem_perm); |
| |
| err = security_sem_semctl(sma, cmd); |
| if (err) { |
| rcu_read_unlock(); |
| goto out_unlock; |
| } |
| |
| switch(cmd){ |
| case IPC_RMID: |
| sem_lock(sma, NULL, -1); |
| freeary(ns, ipcp); |
| goto out_up; |
| case IPC_SET: |
| sem_lock(sma, NULL, -1); |
| err = ipc_update_perm(&semid64.sem_perm, ipcp); |
| if (err) |
| goto out_unlock; |
| sma->sem_ctime = get_seconds(); |
| break; |
| default: |
| rcu_read_unlock(); |
| err = -EINVAL; |
| goto out_up; |
| } |
| |
| out_unlock: |
| sem_unlock(sma, -1); |
| out_up: |
| up_write(&sem_ids(ns).rw_mutex); |
| return err; |
| } |
| |
| SYSCALL_DEFINE4(semctl, int, semid, int, semnum, int, cmd, unsigned long, arg) |
| { |
| int version; |
| struct ipc_namespace *ns; |
| void __user *p = (void __user *)arg; |
| |
| if (semid < 0) |
| return -EINVAL; |
| |
| version = ipc_parse_version(&cmd); |
| ns = current->nsproxy->ipc_ns; |
| |
| switch(cmd) { |
| case IPC_INFO: |
| case SEM_INFO: |
| case IPC_STAT: |
| case SEM_STAT: |
| return semctl_nolock(ns, semid, cmd, version, p); |
| case GETALL: |
| case GETVAL: |
| case GETPID: |
| case GETNCNT: |
| case GETZCNT: |
| case SETALL: |
| return semctl_main(ns, semid, semnum, cmd, p); |
| case SETVAL: |
| return semctl_setval(ns, semid, semnum, arg); |
| case IPC_RMID: |
| case IPC_SET: |
| return semctl_down(ns, semid, cmd, version, p); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /* If the task doesn't already have a undo_list, then allocate one |
| * here. We guarantee there is only one thread using this undo list, |
| * and current is THE ONE |
| * |
| * If this allocation and assignment succeeds, but later |
| * portions of this code fail, there is no need to free the sem_undo_list. |
| * Just let it stay associated with the task, and it'll be freed later |
| * at exit time. |
| * |
| * This can block, so callers must hold no locks. |
| */ |
| static inline int get_undo_list(struct sem_undo_list **undo_listp) |
| { |
| struct sem_undo_list *undo_list; |
| |
| undo_list = current->sysvsem.undo_list; |
| if (!undo_list) { |
| undo_list = kzalloc(sizeof(*undo_list), GFP_KERNEL); |
| if (undo_list == NULL) |
| return -ENOMEM; |
| spin_lock_init(&undo_list->lock); |
| atomic_set(&undo_list->refcnt, 1); |
| INIT_LIST_HEAD(&undo_list->list_proc); |
| |
| current->sysvsem.undo_list = undo_list; |
| } |
| *undo_listp = undo_list; |
| return 0; |
| } |
| |
| static struct sem_undo *__lookup_undo(struct sem_undo_list *ulp, int semid) |
| { |
| struct sem_undo *un; |
| |
| list_for_each_entry_rcu(un, &ulp->list_proc, list_proc) { |
| if (un->semid == semid) |
| return un; |
| } |
| return NULL; |
| } |
| |
| static struct sem_undo *lookup_undo(struct sem_undo_list *ulp, int semid) |
| { |
| struct sem_undo *un; |
| |
| assert_spin_locked(&ulp->lock); |
| |
| un = __lookup_undo(ulp, semid); |
| if (un) { |
| list_del_rcu(&un->list_proc); |
| list_add_rcu(&un->list_proc, &ulp->list_proc); |
| } |
| return un; |
| } |
| |
| /** |
| * find_alloc_undo - Lookup (and if not present create) undo array |
| * @ns: namespace |
| * @semid: semaphore array id |
| * |
| * The function looks up (and if not present creates) the undo structure. |
| * The size of the undo structure depends on the size of the semaphore |
| * array, thus the alloc path is not that straightforward. |
| * Lifetime-rules: sem_undo is rcu-protected, on success, the function |
| * performs a rcu_read_lock(). |
| */ |
| static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid) |
| { |
| struct sem_array *sma; |
| struct sem_undo_list *ulp; |
| struct sem_undo *un, *new; |
| int nsems, error; |
| |
| error = get_undo_list(&ulp); |
| if (error) |
| return ERR_PTR(error); |
| |
| rcu_read_lock(); |
| spin_lock(&ulp->lock); |
| un = lookup_undo(ulp, semid); |
| spin_unlock(&ulp->lock); |
| if (likely(un!=NULL)) |
| goto out; |
| |
| /* no undo structure around - allocate one. */ |
| /* step 1: figure out the size of the semaphore array */ |
| sma = sem_obtain_object_check(ns, semid); |
| if (IS_ERR(sma)) { |
| rcu_read_unlock(); |
| return ERR_CAST(sma); |
| } |
| |
| nsems = sma->sem_nsems; |
| if (!ipc_rcu_getref(sma)) { |
| rcu_read_unlock(); |
| un = ERR_PTR(-EIDRM); |
| goto out; |
| } |
| rcu_read_unlock(); |
| |
| /* step 2: allocate new undo structure */ |
| new = kzalloc(sizeof(struct sem_undo) + sizeof(short)*nsems, GFP_KERNEL); |
| if (!new) { |
| sem_putref(sma); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| /* step 3: Acquire the lock on semaphore array */ |
| sem_lock_and_putref(sma); |
| if (sma->sem_perm.deleted) { |
| sem_unlock(sma, -1); |
| kfree(new); |
| un = ERR_PTR(-EIDRM); |
| goto out; |
| } |
| spin_lock(&ulp->lock); |
| |
| /* |
| * step 4: check for races: did someone else allocate the undo struct? |
| */ |
| un = lookup_undo(ulp, semid); |
| if (un) { |
| kfree(new); |
| goto success; |
| } |
| /* step 5: initialize & link new undo structure */ |
| new->semadj = (short *) &new[1]; |
| new->ulp = ulp; |
| new->semid = semid; |
| assert_spin_locked(&ulp->lock); |
| list_add_rcu(&new->list_proc, &ulp->list_proc); |
| assert_spin_locked(&sma->sem_perm.lock); |
| list_add(&new->list_id, &sma->list_id); |
| un = new; |
| |
| success: |
| spin_unlock(&ulp->lock); |
| rcu_read_lock(); |
| sem_unlock(sma, -1); |
| out: |
| return un; |
| } |
| |
| |
| /** |
| * get_queue_result - Retrieve the result code from sem_queue |
| * @q: Pointer to queue structure |
| * |
| * Retrieve the return code from the pending queue. If IN_WAKEUP is found in |
| * q->status, then we must loop until the value is replaced with the final |
| * value: This may happen if a task is woken up by an unrelated event (e.g. |
| * signal) and in parallel the task is woken up by another task because it got |
| * the requested semaphores. |
| * |
| * The function can be called with or without holding the semaphore spinlock. |
| */ |
| static int get_queue_result(struct sem_queue *q) |
| { |
| int error; |
| |
| error = q->status; |
| while (unlikely(error == IN_WAKEUP)) { |
| cpu_relax(); |
| error = q->status; |
| } |
| |
| return error; |
| } |
| |
| |
| SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops, |
| unsigned, nsops, const struct timespec __user *, timeout) |
| { |
| int error = -EINVAL; |
| struct sem_array *sma; |
| struct sembuf fast_sops[SEMOPM_FAST]; |
| struct sembuf* sops = fast_sops, *sop; |
| struct sem_undo *un; |
| int undos = 0, alter = 0, max, locknum; |
| struct sem_queue queue; |
| unsigned long jiffies_left = 0; |
| struct ipc_namespace *ns; |
| struct list_head tasks; |
| |
| ns = current->nsproxy->ipc_ns; |
| |
| if (nsops < 1 || semid < 0) |
| return -EINVAL; |
| if (nsops > ns->sc_semopm) |
| return -E2BIG; |
| if(nsops > SEMOPM_FAST) { |
| sops = kmalloc(sizeof(*sops)*nsops,GFP_KERNEL); |
| if(sops==NULL) |
| return -ENOMEM; |
| } |
| if (copy_from_user (sops, tsops, nsops * sizeof(*tsops))) { |
| error=-EFAULT; |
| goto out_free; |
| } |
| if (timeout) { |
| struct timespec _timeout; |
| if (copy_from_user(&_timeout, timeout, sizeof(*timeout))) { |
| error = -EFAULT; |
| goto out_free; |
| } |
| if (_timeout.tv_sec < 0 || _timeout.tv_nsec < 0 || |
| _timeout.tv_nsec >= 1000000000L) { |
| error = -EINVAL; |
| goto out_free; |
| } |
| jiffies_left = timespec_to_jiffies(&_timeout); |
| } |
| max = 0; |
| for (sop = sops; sop < sops + nsops; sop++) { |
| if (sop->sem_num >= max) |
| max = sop->sem_num; |
| if (sop->sem_flg & SEM_UNDO) |
| undos = 1; |
| if (sop->sem_op != 0) |
| alter = 1; |
| } |
| |
| INIT_LIST_HEAD(&tasks); |
| |
| if (undos) { |
| /* On success, find_alloc_undo takes the rcu_read_lock */ |
| un = find_alloc_undo(ns, semid); |
| if (IS_ERR(un)) { |
| error = PTR_ERR(un); |
| goto out_free; |
| } |
| } else { |
| un = NULL; |
| rcu_read_lock(); |
| } |
| |
| sma = sem_obtain_object_check(ns, semid); |
| if (IS_ERR(sma)) { |
| rcu_read_unlock(); |
| error = PTR_ERR(sma); |
| goto out_free; |
| } |
| |
| error = -EFBIG; |
| if (max >= sma->sem_nsems) { |
| rcu_read_unlock(); |
| goto out_wakeup; |
| } |
| |
| error = -EACCES; |
| if (ipcperms(ns, &sma->sem_perm, alter ? S_IWUGO : S_IRUGO)) { |
| rcu_read_unlock(); |
| goto out_wakeup; |
| } |
| |
| error = security_sem_semop(sma, sops, nsops, alter); |
| if (error) { |
| rcu_read_unlock(); |
| goto out_wakeup; |
| } |
| |
| /* |
| * semid identifiers are not unique - find_alloc_undo may have |
| * allocated an undo structure, it was invalidated by an RMID |
| * and now a new array with received the same id. Check and fail. |
| * This case can be detected checking un->semid. The existence of |
| * "un" itself is guaranteed by rcu. |
| */ |
| error = -EIDRM; |
| locknum = sem_lock(sma, sops, nsops); |
| if (un && un->semid == -1) |
| goto out_unlock_free; |
| |
| error = try_atomic_semop (sma, sops, nsops, un, task_tgid_vnr(current)); |
| if (error <= 0) { |
| if (alter && error == 0) |
| do_smart_update(sma, sops, nsops, 1, &tasks); |
| |
| goto out_unlock_free; |
| } |
| |
| /* We need to sleep on this operation, so we put the current |
| * task into the pending queue and go to sleep. |
| */ |
| |
| queue.sops = sops; |
| queue.nsops = nsops; |
| queue.undo = un; |
| queue.pid = task_tgid_vnr(current); |
| queue.alter = alter; |
| |
| if (nsops == 1) { |
| struct sem *curr; |
| curr = &sma->sem_base[sops->sem_num]; |
| |
| if (alter) |
| list_add_tail(&queue.list, &curr->sem_pending); |
| else |
| list_add(&queue.list, &curr->sem_pending); |
| } else { |
| if (alter) |
| list_add_tail(&queue.list, &sma->sem_pending); |
| else |
| list_add(&queue.list, &sma->sem_pending); |
| sma->complex_count++; |
| } |
| |
| queue.status = -EINTR; |
| queue.sleeper = current; |
| |
| sleep_again: |
| current->state = TASK_INTERRUPTIBLE; |
| sem_unlock(sma, locknum); |
| |
| if (timeout) |
| jiffies_left = schedule_timeout(jiffies_left); |
| else |
| schedule(); |
| |
| error = get_queue_result(&queue); |
| |
| if (error != -EINTR) { |
| /* fast path: update_queue already obtained all requested |
| * resources. |
| * Perform a smp_mb(): User space could assume that semop() |
| * is a memory barrier: Without the mb(), the cpu could |
| * speculatively read in user space stale data that was |
| * overwritten by the previous owner of the semaphore. |
| */ |
| smp_mb(); |
| |
| goto out_free; |
| } |
| |
| sma = sem_obtain_lock(ns, semid, sops, nsops, &locknum); |
| |
| /* |
| * Wait until it's guaranteed that no wakeup_sem_queue_do() is ongoing. |
| */ |
| error = get_queue_result(&queue); |
| |
| /* |
| * Array removed? If yes, leave without sem_unlock(). |
| */ |
| if (IS_ERR(sma)) { |
| goto out_free; |
| } |
| |
| |
| /* |
| * If queue.status != -EINTR we are woken up by another process. |
| * Leave without unlink_queue(), but with sem_unlock(). |
| */ |
| |
| if (error != -EINTR) { |
| goto out_unlock_free; |
| } |
| |
| /* |
| * If an interrupt occurred we have to clean up the queue |
| */ |
| if (timeout && jiffies_left == 0) |
| error = -EAGAIN; |
| |
| /* |
| * If the wakeup was spurious, just retry |
| */ |
| if (error == -EINTR && !signal_pending(current)) |
| goto sleep_again; |
| |
| unlink_queue(sma, &queue); |
| |
| out_unlock_free: |
| sem_unlock(sma, locknum); |
| out_wakeup: |
| wake_up_sem_queue_do(&tasks); |
| out_free: |
| if(sops != fast_sops) |
| kfree(sops); |
| return error; |
| } |
| |
| SYSCALL_DEFINE3(semop, int, semid, struct sembuf __user *, tsops, |
| unsigned, nsops) |
| { |
| return sys_semtimedop(semid, tsops, nsops, NULL); |
| } |
| |
| /* If CLONE_SYSVSEM is set, establish sharing of SEM_UNDO state between |
| * parent and child tasks. |
| */ |
| |
| int copy_semundo(unsigned long clone_flags, struct task_struct *tsk) |
| { |
| struct sem_undo_list *undo_list; |
| int error; |
| |
| if (clone_flags & CLONE_SYSVSEM) { |
| error = get_undo_list(&undo_list); |
| if (error) |
| return error; |
| atomic_inc(&undo_list->refcnt); |
| tsk->sysvsem.undo_list = undo_list; |
| } else |
| tsk->sysvsem.undo_list = NULL; |
| |
| return 0; |
| } |
| |
| /* |
| * add semadj values to semaphores, free undo structures. |
| * undo structures are not freed when semaphore arrays are destroyed |
| * so some of them may be out of date. |
| * IMPLEMENTATION NOTE: There is some confusion over whether the |
| * set of adjustments that needs to be done should be done in an atomic |
| * manner or not. That is, if we are attempting to decrement the semval |
| * should we queue up and wait until we can do so legally? |
| * The original implementation attempted to do this (queue and wait). |
| * The current implementation does not do so. The POSIX standard |
| * and SVID should be consulted to determine what behavior is mandated. |
| */ |
| void exit_sem(struct task_struct *tsk) |
| { |
| struct sem_undo_list *ulp; |
| |
| ulp = tsk->sysvsem.undo_list; |
| if (!ulp) |
| return; |
| tsk->sysvsem.undo_list = NULL; |
| |
| if (!atomic_dec_and_test(&ulp->refcnt)) |
| return; |
| |
| for (;;) { |
| struct sem_array *sma; |
| struct sem_undo *un; |
| struct list_head tasks; |
| int semid, i; |
| |
| rcu_read_lock(); |
| un = list_entry_rcu(ulp->list_proc.next, |
| struct sem_undo, list_proc); |
| if (&un->list_proc == &ulp->list_proc) |
| semid = -1; |
| else |
| semid = un->semid; |
| |
| if (semid == -1) { |
| rcu_read_unlock(); |
| break; |
| } |
| |
| sma = sem_obtain_object_check(tsk->nsproxy->ipc_ns, un->semid); |
| /* exit_sem raced with IPC_RMID, nothing to do */ |
| if (IS_ERR(sma)) { |
| rcu_read_unlock(); |
| continue; |
| } |
| |
| sem_lock(sma, NULL, -1); |
| un = __lookup_undo(ulp, semid); |
| if (un == NULL) { |
| /* exit_sem raced with IPC_RMID+semget() that created |
| * exactly the same semid. Nothing to do. |
| */ |
| sem_unlock(sma, -1); |
| continue; |
| } |
| |
| /* remove un from the linked lists */ |
| assert_spin_locked(&sma->sem_perm.lock); |
| list_del(&un->list_id); |
| |
| spin_lock(&ulp->lock); |
| list_del_rcu(&un->list_proc); |
| spin_unlock(&ulp->lock); |
| |
| /* perform adjustments registered in un */ |
| for (i = 0; i < sma->sem_nsems; i++) { |
| struct sem * semaphore = &sma->sem_base[i]; |
| if (un->semadj[i]) { |
| semaphore->semval += un->semadj[i]; |
| /* |
| * Range checks of the new semaphore value, |
| * not defined by sus: |
| * - Some unices ignore the undo entirely |
| * (e.g. HP UX 11i 11.22, Tru64 V5.1) |
| * - some cap the value (e.g. FreeBSD caps |
| * at 0, but doesn't enforce SEMVMX) |
| * |
| * Linux caps the semaphore value, both at 0 |
| * and at SEMVMX. |
| * |
| * Manfred <manfred@colorfullife.com> |
| */ |
| if (semaphore->semval < 0) |
| semaphore->semval = 0; |
| if (semaphore->semval > SEMVMX) |
| semaphore->semval = SEMVMX; |
| semaphore->sempid = task_tgid_vnr(current); |
| } |
| } |
| /* maybe some queued-up processes were waiting for this */ |
| INIT_LIST_HEAD(&tasks); |
| do_smart_update(sma, NULL, 0, 1, &tasks); |
| sem_unlock(sma, -1); |
| wake_up_sem_queue_do(&tasks); |
| |
| kfree_rcu(un, rcu); |
| } |
| kfree(ulp); |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| static int sysvipc_sem_proc_show(struct seq_file *s, void *it) |
| { |
| struct user_namespace *user_ns = seq_user_ns(s); |
| struct sem_array *sma = it; |
| |
| return seq_printf(s, |
| "%10d %10d %4o %10u %5u %5u %5u %5u %10lu %10lu\n", |
| sma->sem_perm.key, |
| sma->sem_perm.id, |
| sma->sem_perm.mode, |
| sma->sem_nsems, |
| from_kuid_munged(user_ns, sma->sem_perm.uid), |
| from_kgid_munged(user_ns, sma->sem_perm.gid), |
| from_kuid_munged(user_ns, sma->sem_perm.cuid), |
| from_kgid_munged(user_ns, sma->sem_perm.cgid), |
| sma->sem_otime, |
| sma->sem_ctime); |
| } |
| #endif |