| /* |
| * TI DaVinci GPIO Support |
| * |
| * Copyright (c) 2006-2007 David Brownell |
| * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| #include <linux/gpio.h> |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/gpio-davinci.h> |
| #include <linux/irqchip/chained_irq.h> |
| |
| struct davinci_gpio_regs { |
| u32 dir; |
| u32 out_data; |
| u32 set_data; |
| u32 clr_data; |
| u32 in_data; |
| u32 set_rising; |
| u32 clr_rising; |
| u32 set_falling; |
| u32 clr_falling; |
| u32 intstat; |
| }; |
| |
| typedef struct irq_chip *(*gpio_get_irq_chip_cb_t)(unsigned int irq); |
| |
| #define BINTEN 0x8 /* GPIO Interrupt Per-Bank Enable Register */ |
| #define MAX_LABEL_SIZE 20 |
| |
| static void __iomem *gpio_base; |
| |
| static struct davinci_gpio_regs __iomem *gpio2regs(unsigned gpio) |
| { |
| void __iomem *ptr; |
| |
| if (gpio < 32 * 1) |
| ptr = gpio_base + 0x10; |
| else if (gpio < 32 * 2) |
| ptr = gpio_base + 0x38; |
| else if (gpio < 32 * 3) |
| ptr = gpio_base + 0x60; |
| else if (gpio < 32 * 4) |
| ptr = gpio_base + 0x88; |
| else if (gpio < 32 * 5) |
| ptr = gpio_base + 0xb0; |
| else |
| ptr = NULL; |
| return ptr; |
| } |
| |
| static inline struct davinci_gpio_regs __iomem *irq2regs(struct irq_data *d) |
| { |
| struct davinci_gpio_regs __iomem *g; |
| |
| g = (__force struct davinci_gpio_regs __iomem *)irq_data_get_irq_chip_data(d); |
| |
| return g; |
| } |
| |
| static int davinci_gpio_irq_setup(struct platform_device *pdev); |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| /* board setup code *MUST* setup pinmux and enable the GPIO clock. */ |
| static inline int __davinci_direction(struct gpio_chip *chip, |
| unsigned offset, bool out, int value) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| struct davinci_gpio_regs __iomem *g = d->regs; |
| unsigned long flags; |
| u32 temp; |
| u32 mask = 1 << offset; |
| |
| spin_lock_irqsave(&d->lock, flags); |
| temp = readl_relaxed(&g->dir); |
| if (out) { |
| temp &= ~mask; |
| writel_relaxed(mask, value ? &g->set_data : &g->clr_data); |
| } else { |
| temp |= mask; |
| } |
| writel_relaxed(temp, &g->dir); |
| spin_unlock_irqrestore(&d->lock, flags); |
| |
| return 0; |
| } |
| |
| static int davinci_direction_in(struct gpio_chip *chip, unsigned offset) |
| { |
| return __davinci_direction(chip, offset, false, 0); |
| } |
| |
| static int |
| davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| return __davinci_direction(chip, offset, true, value); |
| } |
| |
| /* |
| * Read the pin's value (works even if it's set up as output); |
| * returns zero/nonzero. |
| * |
| * Note that changes are synched to the GPIO clock, so reading values back |
| * right after you've set them may give old values. |
| */ |
| static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| struct davinci_gpio_regs __iomem *g = d->regs; |
| |
| return !!((1 << offset) & readl_relaxed(&g->in_data)); |
| } |
| |
| /* |
| * Assuming the pin is muxed as a gpio output, set its output value. |
| */ |
| static void |
| davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| struct davinci_gpio_regs __iomem *g = d->regs; |
| |
| writel_relaxed((1 << offset), value ? &g->set_data : &g->clr_data); |
| } |
| |
| static struct davinci_gpio_platform_data * |
| davinci_gpio_get_pdata(struct platform_device *pdev) |
| { |
| struct device_node *dn = pdev->dev.of_node; |
| struct davinci_gpio_platform_data *pdata; |
| int ret; |
| u32 val; |
| |
| if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) |
| return dev_get_platdata(&pdev->dev); |
| |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return NULL; |
| |
| ret = of_property_read_u32(dn, "ti,ngpio", &val); |
| if (ret) |
| goto of_err; |
| |
| pdata->ngpio = val; |
| |
| ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val); |
| if (ret) |
| goto of_err; |
| |
| pdata->gpio_unbanked = val; |
| |
| return pdata; |
| |
| of_err: |
| dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret); |
| return NULL; |
| } |
| |
| #ifdef CONFIG_OF_GPIO |
| static int davinci_gpio_of_xlate(struct gpio_chip *gc, |
| const struct of_phandle_args *gpiospec, |
| u32 *flags) |
| { |
| struct davinci_gpio_controller *chips = dev_get_drvdata(gc->parent); |
| struct davinci_gpio_platform_data *pdata = dev_get_platdata(gc->parent); |
| |
| if (gpiospec->args[0] > pdata->ngpio) |
| return -EINVAL; |
| |
| if (gc != &chips[gpiospec->args[0] / 32].chip) |
| return -EINVAL; |
| |
| if (flags) |
| *flags = gpiospec->args[1]; |
| |
| return gpiospec->args[0] % 32; |
| } |
| #endif |
| |
| static int davinci_gpio_probe(struct platform_device *pdev) |
| { |
| int i, base; |
| unsigned ngpio, nbank; |
| struct davinci_gpio_controller *chips; |
| struct davinci_gpio_platform_data *pdata; |
| struct davinci_gpio_regs __iomem *regs; |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| char label[MAX_LABEL_SIZE]; |
| |
| pdata = davinci_gpio_get_pdata(pdev); |
| if (!pdata) { |
| dev_err(dev, "No platform data found\n"); |
| return -EINVAL; |
| } |
| |
| dev->platform_data = pdata; |
| |
| /* |
| * The gpio banks conceptually expose a segmented bitmap, |
| * and "ngpio" is one more than the largest zero-based |
| * bit index that's valid. |
| */ |
| ngpio = pdata->ngpio; |
| if (ngpio == 0) { |
| dev_err(dev, "How many GPIOs?\n"); |
| return -EINVAL; |
| } |
| |
| if (WARN_ON(ARCH_NR_GPIOS < ngpio)) |
| ngpio = ARCH_NR_GPIOS; |
| |
| nbank = DIV_ROUND_UP(ngpio, 32); |
| chips = devm_kzalloc(dev, |
| nbank * sizeof(struct davinci_gpio_controller), |
| GFP_KERNEL); |
| if (!chips) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| gpio_base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(gpio_base)) |
| return PTR_ERR(gpio_base); |
| |
| for (i = 0, base = 0; base < ngpio; i++, base += 32) { |
| snprintf(label, MAX_LABEL_SIZE, "davinci_gpio.%d", i); |
| chips[i].chip.label = devm_kstrdup(dev, label, GFP_KERNEL); |
| if (!chips[i].chip.label) |
| return -ENOMEM; |
| |
| chips[i].chip.direction_input = davinci_direction_in; |
| chips[i].chip.get = davinci_gpio_get; |
| chips[i].chip.direction_output = davinci_direction_out; |
| chips[i].chip.set = davinci_gpio_set; |
| |
| chips[i].chip.base = base; |
| chips[i].chip.ngpio = ngpio - base; |
| if (chips[i].chip.ngpio > 32) |
| chips[i].chip.ngpio = 32; |
| |
| #ifdef CONFIG_OF_GPIO |
| chips[i].chip.of_gpio_n_cells = 2; |
| chips[i].chip.of_xlate = davinci_gpio_of_xlate; |
| chips[i].chip.parent = dev; |
| chips[i].chip.of_node = dev->of_node; |
| #endif |
| spin_lock_init(&chips[i].lock); |
| |
| regs = gpio2regs(base); |
| if (!regs) |
| return -ENXIO; |
| chips[i].regs = regs; |
| chips[i].set_data = ®s->set_data; |
| chips[i].clr_data = ®s->clr_data; |
| chips[i].in_data = ®s->in_data; |
| |
| gpiochip_add_data(&chips[i].chip, &chips[i]); |
| } |
| |
| platform_set_drvdata(pdev, chips); |
| davinci_gpio_irq_setup(pdev); |
| return 0; |
| } |
| |
| /*--------------------------------------------------------------------------*/ |
| /* |
| * We expect irqs will normally be set up as input pins, but they can also be |
| * used as output pins ... which is convenient for testing. |
| * |
| * NOTE: The first few GPIOs also have direct INTC hookups in addition |
| * to their GPIOBNK0 irq, with a bit less overhead. |
| * |
| * All those INTC hookups (direct, plus several IRQ banks) can also |
| * serve as EDMA event triggers. |
| */ |
| |
| static void gpio_irq_disable(struct irq_data *d) |
| { |
| struct davinci_gpio_regs __iomem *g = irq2regs(d); |
| u32 mask = (u32) irq_data_get_irq_handler_data(d); |
| |
| writel_relaxed(mask, &g->clr_falling); |
| writel_relaxed(mask, &g->clr_rising); |
| } |
| |
| static void gpio_irq_enable(struct irq_data *d) |
| { |
| struct davinci_gpio_regs __iomem *g = irq2regs(d); |
| u32 mask = (u32) irq_data_get_irq_handler_data(d); |
| unsigned status = irqd_get_trigger_type(d); |
| |
| status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; |
| if (!status) |
| status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; |
| |
| if (status & IRQ_TYPE_EDGE_FALLING) |
| writel_relaxed(mask, &g->set_falling); |
| if (status & IRQ_TYPE_EDGE_RISING) |
| writel_relaxed(mask, &g->set_rising); |
| } |
| |
| static int gpio_irq_type(struct irq_data *d, unsigned trigger) |
| { |
| if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static struct irq_chip gpio_irqchip = { |
| .name = "GPIO", |
| .irq_enable = gpio_irq_enable, |
| .irq_disable = gpio_irq_disable, |
| .irq_set_type = gpio_irq_type, |
| .flags = IRQCHIP_SET_TYPE_MASKED, |
| }; |
| |
| static void gpio_irq_handler(struct irq_desc *desc) |
| { |
| unsigned int irq = irq_desc_get_irq(desc); |
| struct davinci_gpio_regs __iomem *g; |
| u32 mask = 0xffff; |
| struct davinci_gpio_controller *d; |
| |
| d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc); |
| g = (struct davinci_gpio_regs __iomem *)d->regs; |
| |
| /* we only care about one bank */ |
| if (irq & 1) |
| mask <<= 16; |
| |
| /* temporarily mask (level sensitive) parent IRQ */ |
| chained_irq_enter(irq_desc_get_chip(desc), desc); |
| while (1) { |
| u32 status; |
| int bit; |
| |
| /* ack any irqs */ |
| status = readl_relaxed(&g->intstat) & mask; |
| if (!status) |
| break; |
| writel_relaxed(status, &g->intstat); |
| |
| /* now demux them to the right lowlevel handler */ |
| |
| while (status) { |
| bit = __ffs(status); |
| status &= ~BIT(bit); |
| generic_handle_irq( |
| irq_find_mapping(d->irq_domain, |
| d->chip.base + bit)); |
| } |
| } |
| chained_irq_exit(irq_desc_get_chip(desc), desc); |
| /* now it may re-trigger */ |
| } |
| |
| static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| |
| if (d->irq_domain) |
| return irq_create_mapping(d->irq_domain, d->chip.base + offset); |
| else |
| return -ENXIO; |
| } |
| |
| static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) |
| { |
| struct davinci_gpio_controller *d = gpiochip_get_data(chip); |
| |
| /* |
| * NOTE: we assume for now that only irqs in the first gpio_chip |
| * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). |
| */ |
| if (offset < d->gpio_unbanked) |
| return d->gpio_irq + offset; |
| else |
| return -ENODEV; |
| } |
| |
| static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger) |
| { |
| struct davinci_gpio_controller *d; |
| struct davinci_gpio_regs __iomem *g; |
| u32 mask; |
| |
| d = (struct davinci_gpio_controller *)irq_data_get_irq_handler_data(data); |
| g = (struct davinci_gpio_regs __iomem *)d->regs; |
| mask = __gpio_mask(data->irq - d->gpio_irq); |
| |
| if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) |
| return -EINVAL; |
| |
| writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_FALLING) |
| ? &g->set_falling : &g->clr_falling); |
| writel_relaxed(mask, (trigger & IRQ_TYPE_EDGE_RISING) |
| ? &g->set_rising : &g->clr_rising); |
| |
| return 0; |
| } |
| |
| static int |
| davinci_gpio_irq_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hw) |
| { |
| struct davinci_gpio_regs __iomem *g = gpio2regs(hw); |
| |
| irq_set_chip_and_handler_name(irq, &gpio_irqchip, handle_simple_irq, |
| "davinci_gpio"); |
| irq_set_irq_type(irq, IRQ_TYPE_NONE); |
| irq_set_chip_data(irq, (__force void *)g); |
| irq_set_handler_data(irq, (void *)__gpio_mask(hw)); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops davinci_gpio_irq_ops = { |
| .map = davinci_gpio_irq_map, |
| .xlate = irq_domain_xlate_onetwocell, |
| }; |
| |
| static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq) |
| { |
| static struct irq_chip_type gpio_unbanked; |
| |
| gpio_unbanked = *irq_data_get_chip_type(irq_get_irq_data(irq)); |
| |
| return &gpio_unbanked.chip; |
| }; |
| |
| static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq) |
| { |
| static struct irq_chip gpio_unbanked; |
| |
| gpio_unbanked = *irq_get_chip(irq); |
| return &gpio_unbanked; |
| }; |
| |
| static const struct of_device_id davinci_gpio_ids[]; |
| |
| /* |
| * NOTE: for suspend/resume, probably best to make a platform_device with |
| * suspend_late/resume_resume calls hooking into results of the set_wake() |
| * calls ... so if no gpios are wakeup events the clock can be disabled, |
| * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0 |
| * (dm6446) can be set appropriately for GPIOV33 pins. |
| */ |
| |
| static int davinci_gpio_irq_setup(struct platform_device *pdev) |
| { |
| unsigned gpio, bank; |
| int irq; |
| struct clk *clk; |
| u32 binten = 0; |
| unsigned ngpio, bank_irq; |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct davinci_gpio_controller *chips = platform_get_drvdata(pdev); |
| struct davinci_gpio_platform_data *pdata = dev->platform_data; |
| struct davinci_gpio_regs __iomem *g; |
| struct irq_domain *irq_domain = NULL; |
| const struct of_device_id *match; |
| struct irq_chip *irq_chip; |
| gpio_get_irq_chip_cb_t gpio_get_irq_chip; |
| |
| /* |
| * Use davinci_gpio_get_irq_chip by default to handle non DT cases |
| */ |
| gpio_get_irq_chip = davinci_gpio_get_irq_chip; |
| match = of_match_device(of_match_ptr(davinci_gpio_ids), |
| dev); |
| if (match) |
| gpio_get_irq_chip = (gpio_get_irq_chip_cb_t)match->data; |
| |
| ngpio = pdata->ngpio; |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!res) { |
| dev_err(dev, "Invalid IRQ resource\n"); |
| return -EBUSY; |
| } |
| |
| bank_irq = res->start; |
| |
| if (!bank_irq) { |
| dev_err(dev, "Invalid IRQ resource\n"); |
| return -ENODEV; |
| } |
| |
| clk = devm_clk_get(dev, "gpio"); |
| if (IS_ERR(clk)) { |
| printk(KERN_ERR "Error %ld getting gpio clock?\n", |
| PTR_ERR(clk)); |
| return PTR_ERR(clk); |
| } |
| clk_prepare_enable(clk); |
| |
| if (!pdata->gpio_unbanked) { |
| irq = irq_alloc_descs(-1, 0, ngpio, 0); |
| if (irq < 0) { |
| dev_err(dev, "Couldn't allocate IRQ numbers\n"); |
| return irq; |
| } |
| |
| irq_domain = irq_domain_add_legacy(dev->of_node, ngpio, irq, 0, |
| &davinci_gpio_irq_ops, |
| chips); |
| if (!irq_domain) { |
| dev_err(dev, "Couldn't register an IRQ domain\n"); |
| return -ENODEV; |
| } |
| } |
| |
| /* |
| * Arrange gpio_to_irq() support, handling either direct IRQs or |
| * banked IRQs. Having GPIOs in the first GPIO bank use direct |
| * IRQs, while the others use banked IRQs, would need some setup |
| * tweaks to recognize hardware which can do that. |
| */ |
| for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) { |
| chips[bank].chip.to_irq = gpio_to_irq_banked; |
| chips[bank].irq_domain = irq_domain; |
| } |
| |
| /* |
| * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO |
| * controller only handling trigger modes. We currently assume no |
| * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. |
| */ |
| if (pdata->gpio_unbanked) { |
| /* pass "bank 0" GPIO IRQs to AINTC */ |
| chips[0].chip.to_irq = gpio_to_irq_unbanked; |
| chips[0].gpio_irq = bank_irq; |
| chips[0].gpio_unbanked = pdata->gpio_unbanked; |
| binten = GENMASK(pdata->gpio_unbanked / 16, 0); |
| |
| /* AINTC handles mask/unmask; GPIO handles triggering */ |
| irq = bank_irq; |
| irq_chip = gpio_get_irq_chip(irq); |
| irq_chip->name = "GPIO-AINTC"; |
| irq_chip->irq_set_type = gpio_irq_type_unbanked; |
| |
| /* default trigger: both edges */ |
| g = gpio2regs(0); |
| writel_relaxed(~0, &g->set_falling); |
| writel_relaxed(~0, &g->set_rising); |
| |
| /* set the direct IRQs up to use that irqchip */ |
| for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++, irq++) { |
| irq_set_chip(irq, irq_chip); |
| irq_set_handler_data(irq, &chips[gpio / 32]); |
| irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH); |
| } |
| |
| goto done; |
| } |
| |
| /* |
| * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we |
| * then chain through our own handler. |
| */ |
| for (gpio = 0, bank = 0; gpio < ngpio; bank++, bank_irq++, gpio += 16) { |
| /* disabled by default, enabled only as needed */ |
| g = gpio2regs(gpio); |
| writel_relaxed(~0, &g->clr_falling); |
| writel_relaxed(~0, &g->clr_rising); |
| |
| /* |
| * Each chip handles 32 gpios, and each irq bank consists of 16 |
| * gpio irqs. Pass the irq bank's corresponding controller to |
| * the chained irq handler. |
| */ |
| irq_set_chained_handler_and_data(bank_irq, gpio_irq_handler, |
| &chips[gpio / 32]); |
| |
| binten |= BIT(bank); |
| } |
| |
| done: |
| /* |
| * BINTEN -- per-bank interrupt enable. genirq would also let these |
| * bits be set/cleared dynamically. |
| */ |
| writel_relaxed(binten, gpio_base + BINTEN); |
| |
| return 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_OF) |
| static const struct of_device_id davinci_gpio_ids[] = { |
| { .compatible = "ti,keystone-gpio", keystone_gpio_get_irq_chip}, |
| { .compatible = "ti,dm6441-gpio", davinci_gpio_get_irq_chip}, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, davinci_gpio_ids); |
| #endif |
| |
| static struct platform_driver davinci_gpio_driver = { |
| .probe = davinci_gpio_probe, |
| .driver = { |
| .name = "davinci_gpio", |
| .of_match_table = of_match_ptr(davinci_gpio_ids), |
| }, |
| }; |
| |
| /** |
| * GPIO driver registration needs to be done before machine_init functions |
| * access GPIO. Hence davinci_gpio_drv_reg() is a postcore_initcall. |
| */ |
| static int __init davinci_gpio_drv_reg(void) |
| { |
| return platform_driver_register(&davinci_gpio_driver); |
| } |
| postcore_initcall(davinci_gpio_drv_reg); |