Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 8807ec6c707802cabadc0fe1b035ffefa27f1719 / . / drivers / tty / serial / sh-sci.c
blob: fcac1360c783b913ef49c0703ae63949a6262f08 [file] [log] [blame]
/*
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
*
* Copyright (C) 2002 - 2011 Paul Mundt
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
*
* based off of the old drivers/char/sh-sci.c by:
*
* Copyright (C) 1999, 2000 Niibe Yutaka
* Copyright (C) 2000 Sugioka Toshinobu
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
* Modified to support SecureEdge. David McCullough (2002)
* Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
* Removed SH7300 support (Jul 2007).
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#undef DEBUG
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sh_dma.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/sysrq.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/platform_device.h>
#include <linux/serial_sci.h>
#include <linux/notifier.h>
#include <linux/pm_runtime.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/ctype.h>
#include <linux/err.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#ifdef CONFIG_SUPERH
#include <asm/sh_bios.h>
#endif
#include "sh-sci.h"
struct sci_port {
struct uart_port port;
/* Platform configuration */
struct plat_sci_port *cfg;
/* Break timer */
struct timer_list break_timer;
int break_flag;
/* Interface clock */
struct clk *iclk;
/* Function clock */
struct clk *fclk;
char *irqstr[SCIx_NR_IRQS];
char *gpiostr[SCIx_NR_FNS];
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
struct dma_async_tx_descriptor *desc_tx;
struct dma_async_tx_descriptor *desc_rx[2];
dma_cookie_t cookie_tx;
dma_cookie_t cookie_rx[2];
dma_cookie_t active_rx;
struct scatterlist sg_tx;
unsigned int sg_len_tx;
struct scatterlist sg_rx[2];
size_t buf_len_rx;
struct sh_dmae_slave param_tx;
struct sh_dmae_slave param_rx;
struct work_struct work_tx;
struct work_struct work_rx;
struct timer_list rx_timer;
unsigned int rx_timeout;
#endif
struct notifier_block freq_transition;
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
unsigned short saved_smr;
unsigned short saved_fcr;
unsigned char saved_brr;
#endif
};
/* Function prototypes */
static void sci_start_tx(struct uart_port *port);
static void sci_stop_tx(struct uart_port *port);
static void sci_start_rx(struct uart_port *port);
#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
static struct sci_port sci_ports[SCI_NPORTS];
static struct uart_driver sci_uart_driver;
static inline struct sci_port *
to_sci_port(struct uart_port *uart)
{
return container_of(uart, struct sci_port, port);
}
struct plat_sci_reg {
u8 offset, size;
};
/* Helper for invalidating specific entries of an inherited map. */
#define sci_reg_invalid { .offset = 0, .size = 0 }
static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCIx_PROBE_REGTYPE] = {
[0 ... SCIx_NR_REGS - 1] = sci_reg_invalid,
},
/*
* Common SCI definitions, dependent on the port's regshift
* value.
*/
[SCIx_SCI_REGTYPE] = {
[SCSMR] = { 0x00, 8 },
[SCBRR] = { 0x01, 8 },
[SCSCR] = { 0x02, 8 },
[SCxTDR] = { 0x03, 8 },
[SCxSR] = { 0x04, 8 },
[SCxRDR] = { 0x05, 8 },
[SCFCR] = sci_reg_invalid,
[SCFDR] = sci_reg_invalid,
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
},
/*
* Common definitions for legacy IrDA ports, dependent on
* regshift value.
*/
[SCIx_IRDA_REGTYPE] = {
[SCSMR] = { 0x00, 8 },
[SCBRR] = { 0x01, 8 },
[SCSCR] = { 0x02, 8 },
[SCxTDR] = { 0x03, 8 },
[SCxSR] = { 0x04, 8 },
[SCxRDR] = { 0x05, 8 },
[SCFCR] = { 0x06, 8 },
[SCFDR] = { 0x07, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
},
/*
* Common SCIFA definitions.
*/
[SCIx_SCIFA_REGTYPE] = {
[SCSMR] = { 0x00, 16 },
[SCBRR] = { 0x04, 8 },
[SCSCR] = { 0x08, 16 },
[SCxTDR] = { 0x20, 8 },
[SCxSR] = { 0x14, 16 },
[SCxRDR] = { 0x24, 8 },
[SCFCR] = { 0x18, 16 },
[SCFDR] = { 0x1c, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
},
/*
* Common SCIFB definitions.
*/
[SCIx_SCIFB_REGTYPE] = {
[SCSMR] = { 0x00, 16 },
[SCBRR] = { 0x04, 8 },
[SCSCR] = { 0x08, 16 },
[SCxTDR] = { 0x40, 8 },
[SCxSR] = { 0x14, 16 },
[SCxRDR] = { 0x60, 8 },
[SCFCR] = { 0x18, 16 },
[SCFDR] = { 0x1c, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
},
/*
* Common SH-2(A) SCIF definitions for ports with FIFO data
* count registers.
*/
[SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
[SCSMR] = { 0x00, 16 },
[SCBRR] = { 0x04, 8 },
[SCSCR] = { 0x08, 16 },
[SCxTDR] = { 0x0c, 8 },
[SCxSR] = { 0x10, 16 },
[SCxRDR] = { 0x14, 8 },
[SCFCR] = { 0x18, 16 },
[SCFDR] = { 0x1c, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = { 0x20, 16 },
[SCLSR] = { 0x24, 16 },
},
/*
* Common SH-3 SCIF definitions.
*/
[SCIx_SH3_SCIF_REGTYPE] = {
[SCSMR] = { 0x00, 8 },
[SCBRR] = { 0x02, 8 },
[SCSCR] = { 0x04, 8 },
[SCxTDR] = { 0x06, 8 },
[SCxSR] = { 0x08, 16 },
[SCxRDR] = { 0x0a, 8 },
[SCFCR] = { 0x0c, 8 },
[SCFDR] = { 0x0e, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
},
/*
* Common SH-4(A) SCIF(B) definitions.
*/
[SCIx_SH4_SCIF_REGTYPE] = {
[SCSMR] = { 0x00, 16 },
[SCBRR] = { 0x04, 8 },
[SCSCR] = { 0x08, 16 },
[SCxTDR] = { 0x0c, 8 },
[SCxSR] = { 0x10, 16 },
[SCxRDR] = { 0x14, 8 },
[SCFCR] = { 0x18, 16 },
[SCFDR] = { 0x1c, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = { 0x20, 16 },
[SCLSR] = { 0x24, 16 },
},
/*
* Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR
* register.
*/
[SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = {
[SCSMR] = { 0x00, 16 },
[SCBRR] = { 0x04, 8 },
[SCSCR] = { 0x08, 16 },
[SCxTDR] = { 0x0c, 8 },
[SCxSR] = { 0x10, 16 },
[SCxRDR] = { 0x14, 8 },
[SCFCR] = { 0x18, 16 },
[SCFDR] = { 0x1c, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = sci_reg_invalid,
[SCLSR] = { 0x24, 16 },
},
/*
* Common SH-4(A) SCIF(B) definitions for ports with FIFO data
* count registers.
*/
[SCIx_SH4_SCIF_FIFODATA_REGTYPE] = {
[SCSMR] = { 0x00, 16 },
[SCBRR] = { 0x04, 8 },
[SCSCR] = { 0x08, 16 },
[SCxTDR] = { 0x0c, 8 },
[SCxSR] = { 0x10, 16 },
[SCxRDR] = { 0x14, 8 },
[SCFCR] = { 0x18, 16 },
[SCFDR] = { 0x1c, 16 },
[SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */
[SCRFDR] = { 0x20, 16 },
[SCSPTR] = { 0x24, 16 },
[SCLSR] = { 0x28, 16 },
},
/*
* SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR
* registers.
*/
[SCIx_SH7705_SCIF_REGTYPE] = {
[SCSMR] = { 0x00, 16 },
[SCBRR] = { 0x04, 8 },
[SCSCR] = { 0x08, 16 },
[SCxTDR] = { 0x20, 8 },
[SCxSR] = { 0x14, 16 },
[SCxRDR] = { 0x24, 8 },
[SCFCR] = { 0x18, 16 },
[SCFDR] = { 0x1c, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
},
};
#define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset)
/*
* The "offset" here is rather misleading, in that it refers to an enum
* value relative to the port mapping rather than the fixed offset
* itself, which needs to be manually retrieved from the platform's
* register map for the given port.
*/
static unsigned int sci_serial_in(struct uart_port *p, int offset)
{
struct plat_sci_reg *reg = sci_getreg(p, offset);
if (reg->size == 8)
return ioread8(p->membase + (reg->offset << p->regshift));
else if (reg->size == 16)
return ioread16(p->membase + (reg->offset << p->regshift));
else
WARN(1, "Invalid register access\n");
return 0;
}
static void sci_serial_out(struct uart_port *p, int offset, int value)
{
struct plat_sci_reg *reg = sci_getreg(p, offset);
if (reg->size == 8)
iowrite8(value, p->membase + (reg->offset << p->regshift));
else if (reg->size == 16)
iowrite16(value, p->membase + (reg->offset << p->regshift));
else
WARN(1, "Invalid register access\n");
}
static int sci_probe_regmap(struct plat_sci_port *cfg)
{
switch (cfg->type) {
case PORT_SCI:
cfg->regtype = SCIx_SCI_REGTYPE;
break;
case PORT_IRDA:
cfg->regtype = SCIx_IRDA_REGTYPE;
break;
case PORT_SCIFA:
cfg->regtype = SCIx_SCIFA_REGTYPE;
break;
case PORT_SCIFB:
cfg->regtype = SCIx_SCIFB_REGTYPE;
break;
case PORT_SCIF:
/*
* The SH-4 is a bit of a misnomer here, although that's
* where this particular port layout originated. This
* configuration (or some slight variation thereof)
* remains the dominant model for all SCIFs.
*/
cfg->regtype = SCIx_SH4_SCIF_REGTYPE;
break;
default:
printk(KERN_ERR "Can't probe register map for given port\n");
return -EINVAL;
}
return 0;
}
static void sci_port_enable(struct sci_port *sci_port)
{
if (!sci_port->port.dev)
return;
pm_runtime_get_sync(sci_port->port.dev);
clk_enable(sci_port->iclk);
sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
clk_enable(sci_port->fclk);
}
static void sci_port_disable(struct sci_port *sci_port)
{
if (!sci_port->port.dev)
return;
clk_disable(sci_port->fclk);
clk_disable(sci_port->iclk);
pm_runtime_put_sync(sci_port->port.dev);
}
#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
#ifdef CONFIG_CONSOLE_POLL
static int sci_poll_get_char(struct uart_port *port)
{
unsigned short status;
int c;
do {
status = serial_port_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
continue;
}
break;
} while (1);
if (!(status & SCxSR_RDxF(port)))
return NO_POLL_CHAR;
c = serial_port_in(port, SCxRDR);
/* Dummy read */
serial_port_in(port, SCxSR);
serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
return c;
}
#endif
static void sci_poll_put_char(struct uart_port *port, unsigned char c)
{
unsigned short status;
do {
status = serial_port_in(port, SCxSR);
} while (!(status & SCxSR_TDxE(port)));
serial_port_out(port, SCxTDR, c);
serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
struct sci_port *s = to_sci_port(port);
struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
/*
* Use port-specific handler if provided.
*/
if (s->cfg->ops && s->cfg->ops->init_pins) {
s->cfg->ops->init_pins(port, cflag);
return;
}
/*
* For the generic path SCSPTR is necessary. Bail out if that's
* unavailable, too.
*/
if (!reg->size)
return;
if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) &&
((!(cflag & CRTSCTS)))) {
unsigned short status;
status = serial_port_in(port, SCSPTR);
status &= ~SCSPTR_CTSIO;
status |= SCSPTR_RTSIO;
serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */
}
}
static int sci_txfill(struct uart_port *port)
{
struct plat_sci_reg *reg;
reg = sci_getreg(port, SCTFDR);
if (reg->size)
return serial_port_in(port, SCTFDR) & 0xff;
reg = sci_getreg(port, SCFDR);
if (reg->size)
return serial_port_in(port, SCFDR) >> 8;
return !(serial_port_in(port, SCxSR) & SCI_TDRE);
}
static int sci_txroom(struct uart_port *port)
{
return port->fifosize - sci_txfill(port);
}
static int sci_rxfill(struct uart_port *port)
{
struct plat_sci_reg *reg;
reg = sci_getreg(port, SCRFDR);
if (reg->size)
return serial_port_in(port, SCRFDR) & 0xff;
reg = sci_getreg(port, SCFDR);
if (reg->size)
return serial_port_in(port, SCFDR) & ((port->fifosize << 1) - 1);
return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
}
/*
* SCI helper for checking the state of the muxed port/RXD pins.
*/
static inline int sci_rxd_in(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
if (s->cfg->port_reg <= 0)
return 1;
/* Cast for ARM damage */
return !!__raw_readb((void __iomem *)s->cfg->port_reg);
}
/* ********************************************************************** *
* the interrupt related routines *
* ********************************************************************** */
static void sci_transmit_chars(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
unsigned int stopped = uart_tx_stopped(port);
unsigned short status;
unsigned short ctrl;
int count;
status = serial_port_in(port, SCxSR);
if (!(status & SCxSR_TDxE(port))) {
ctrl = serial_port_in(port, SCSCR);
if (uart_circ_empty(xmit))
ctrl &= ~SCSCR_TIE;
else
ctrl |= SCSCR_TIE;
serial_port_out(port, SCSCR, ctrl);
return;
}
count = sci_txroom(port);
do {
unsigned char c;
if (port->x_char) {
c = port->x_char;
port->x_char = 0;
} else if (!uart_circ_empty(xmit) && !stopped) {
c = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
} else {
break;
}
serial_port_out(port, SCxTDR, c);
port->icount.tx++;
} while (--count > 0);
serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit)) {
sci_stop_tx(port);
} else {
ctrl = serial_port_in(port, SCSCR);
if (port->type != PORT_SCI) {
serial_port_in(port, SCxSR); /* Dummy read */
serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
}
ctrl |= SCSCR_TIE;
serial_port_out(port, SCSCR, ctrl);
}
}
/* On SH3, SCIF may read end-of-break as a space->mark char */
#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); })
static void sci_receive_chars(struct uart_port *port)
{
struct sci_port *sci_port = to_sci_port(port);
struct tty_struct *tty = port->state->port.tty;
int i, count, copied = 0;
unsigned short status;
unsigned char flag;
status = serial_port_in(port, SCxSR);
if (!(status & SCxSR_RDxF(port)))
return;
while (1) {
/* Don't copy more bytes than there is room for in the buffer */
count = tty_buffer_request_room(tty, sci_rxfill(port));
/* If for any reason we can't copy more data, we're done! */
if (count == 0)
break;
if (port->type == PORT_SCI) {
char c = serial_port_in(port, SCxRDR);
if (uart_handle_sysrq_char(port, c) ||
sci_port->break_flag)
count = 0;
else
tty_insert_flip_char(tty, c, TTY_NORMAL);
} else {
for (i = 0; i < count; i++) {
char c = serial_port_in(port, SCxRDR);
status = serial_port_in(port, SCxSR);
#if defined(CONFIG_CPU_SH3)
/* Skip "chars" during break */
if (sci_port->break_flag) {
if ((c == 0) &&
(status & SCxSR_FER(port))) {
count--; i--;
continue;
}
/* Nonzero => end-of-break */
dev_dbg(port->dev, "debounce<%02x>\n", c);
sci_port->break_flag = 0;
if (STEPFN(c)) {
count--; i--;
continue;
}
}
#endif /* CONFIG_CPU_SH3 */
if (uart_handle_sysrq_char(port, c)) {
count--; i--;
continue;
}
/* Store data and status */
if (status & SCxSR_FER(port)) {
flag = TTY_FRAME;
port->icount.frame++;
dev_notice(port->dev, "frame error\n");
} else if (status & SCxSR_PER(port)) {
flag = TTY_PARITY;
port->icount.parity++;
dev_notice(port->dev, "parity error\n");
} else
flag = TTY_NORMAL;
tty_insert_flip_char(tty, c, flag);
}
}
serial_port_in(port, SCxSR); /* dummy read */
serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
copied += count;
port->icount.rx += count;
}
if (copied) {
/* Tell the rest of the system the news. New characters! */
tty_flip_buffer_push(tty);
} else {
serial_port_in(port, SCxSR); /* dummy read */
serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
}
}
#define SCI_BREAK_JIFFIES (HZ/20)
/*
* The sci generates interrupts during the break,
* 1 per millisecond or so during the break period, for 9600 baud.
* So dont bother disabling interrupts.
* But dont want more than 1 break event.
* Use a kernel timer to periodically poll the rx line until
* the break is finished.
*/
static inline void sci_schedule_break_timer(struct sci_port *port)
{
mod_timer(&port->break_timer, jiffies + SCI_BREAK_JIFFIES);
}
/* Ensure that two consecutive samples find the break over. */
static void sci_break_timer(unsigned long data)
{
struct sci_port *port = (struct sci_port *)data;
sci_port_enable(port);
if (sci_rxd_in(&port->port) == 0) {
port->break_flag = 1;
sci_schedule_break_timer(port);
} else if (port->break_flag == 1) {
/* break is over. */
port->break_flag = 2;
sci_schedule_break_timer(port);
} else
port->break_flag = 0;
sci_port_disable(port);
}
static int sci_handle_errors(struct uart_port *port)
{
int copied = 0;
unsigned short status = serial_port_in(port, SCxSR);
struct tty_struct *tty = port->state->port.tty;
struct sci_port *s = to_sci_port(port);
/*
* Handle overruns, if supported.
*/
if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
if (status & (1 << s->cfg->overrun_bit)) {
port->icount.overrun++;
/* overrun error */
if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
copied++;
dev_notice(port->dev, "overrun error");
}
}
if (status & SCxSR_FER(port)) {
if (sci_rxd_in(port) == 0) {
/* Notify of BREAK */
struct sci_port *sci_port = to_sci_port(port);
if (!sci_port->break_flag) {
port->icount.brk++;
sci_port->break_flag = 1;
sci_schedule_break_timer(sci_port);
/* Do sysrq handling. */
if (uart_handle_break(port))
return 0;
dev_dbg(port->dev, "BREAK detected\n");
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
copied++;
}
} else {
/* frame error */
port->icount.frame++;
if (tty_insert_flip_char(tty, 0, TTY_FRAME))
copied++;
dev_notice(port->dev, "frame error\n");
}
}
if (status & SCxSR_PER(port)) {
/* parity error */
port->icount.parity++;
if (tty_insert_flip_char(tty, 0, TTY_PARITY))
copied++;
dev_notice(port->dev, "parity error");
}
if (copied)
tty_flip_buffer_push(tty);
return copied;
}
static int sci_handle_fifo_overrun(struct uart_port *port)
{
struct tty_struct *tty = port->state->port.tty;
struct sci_port *s = to_sci_port(port);
struct plat_sci_reg *reg;
int copied = 0;
reg = sci_getreg(port, SCLSR);
if (!reg->size)
return 0;
if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
serial_port_out(port, SCLSR, 0);
port->icount.overrun++;
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
tty_flip_buffer_push(tty);
dev_notice(port->dev, "overrun error\n");
copied++;
}
return copied;
}
static int sci_handle_breaks(struct uart_port *port)
{
int copied = 0;
unsigned short status = serial_port_in(port, SCxSR);
struct tty_struct *tty = port->state->port.tty;
struct sci_port *s = to_sci_port(port);
if (uart_handle_break(port))
return 0;
if (!s->break_flag && status & SCxSR_BRK(port)) {
#if defined(CONFIG_CPU_SH3)
/* Debounce break */
s->break_flag = 1;
#endif
port->icount.brk++;
/* Notify of BREAK */
if (tty_insert_flip_char(tty, 0, TTY_BREAK))
copied++;
dev_dbg(port->dev, "BREAK detected\n");
}
if (copied)
tty_flip_buffer_push(tty);
copied += sci_handle_fifo_overrun(port);
return copied;
}
static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
{
#ifdef CONFIG_SERIAL_SH_SCI_DMA
struct uart_port *port = ptr;
struct sci_port *s = to_sci_port(port);
if (s->chan_rx) {
u16 scr = serial_port_in(port, SCSCR);
u16 ssr = serial_port_in(port, SCxSR);
/* Disable future Rx interrupts */
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
disable_irq_nosync(irq);
scr |= 0x4000;
} else {
scr &= ~SCSCR_RIE;
}
serial_port_out(port, SCSCR, scr);
/* Clear current interrupt */
serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
jiffies, s->rx_timeout);
mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
return IRQ_HANDLED;
}
#endif
/* I think sci_receive_chars has to be called irrespective
* of whether the I_IXOFF is set, otherwise, how is the interrupt
* to be disabled?
*/
sci_receive_chars(ptr);
return IRQ_HANDLED;
}
static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
sci_transmit_chars(port);
spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
static irqreturn_t sci_er_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
/* Handle errors */
if (port->type == PORT_SCI) {
if (sci_handle_errors(port)) {
/* discard character in rx buffer */
serial_port_in(port, SCxSR);
serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
}
} else {
sci_handle_fifo_overrun(port);
sci_rx_interrupt(irq, ptr);
}
serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
/* Kick the transmission */
sci_tx_interrupt(irq, ptr);
return IRQ_HANDLED;
}
static irqreturn_t sci_br_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
/* Handle BREAKs */
sci_handle_breaks(port);
serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
return IRQ_HANDLED;
}
static inline unsigned long port_rx_irq_mask(struct uart_port *port)
{
/*
* Not all ports (such as SCIFA) will support REIE. Rather than
* special-casing the port type, we check the port initialization
* IRQ enable mask to see whether the IRQ is desired at all. If
* it's unset, it's logically inferred that there's no point in
* testing for it.
*/
return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
}
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status, err_enabled;
struct uart_port *port = ptr;
struct sci_port *s = to_sci_port(port);
irqreturn_t ret = IRQ_NONE;
ssr_status = serial_port_in(port, SCxSR);
scr_status = serial_port_in(port, SCSCR);
err_enabled = scr_status & port_rx_irq_mask(port);
/* Tx Interrupt */
if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) &&
!s->chan_tx)
ret = sci_tx_interrupt(irq, ptr);
/*
* Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
* DR flags
*/
if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
(scr_status & SCSCR_RIE))
ret = sci_rx_interrupt(irq, ptr);
/* Error Interrupt */
if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
ret = sci_er_interrupt(irq, ptr);
/* Break Interrupt */
if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
return ret;
}
/*
* Here we define a transition notifier so that we can update all of our
* ports' baud rate when the peripheral clock changes.
*/
static int sci_notifier(struct notifier_block *self,
unsigned long phase, void *p)
{
struct sci_port *sci_port;
unsigned long flags;
sci_port = container_of(self, struct sci_port, freq_transition);
if ((phase == CPUFREQ_POSTCHANGE) ||
(phase == CPUFREQ_RESUMECHANGE)) {
struct uart_port *port = &sci_port->port;
spin_lock_irqsave(&port->lock, flags);
port->uartclk = clk_get_rate(sci_port->iclk);
spin_unlock_irqrestore(&port->lock, flags);
}
return NOTIFY_OK;
}
static struct sci_irq_desc {
const char *desc;
irq_handler_t handler;
} sci_irq_desc[] = {
/*
* Split out handlers, the default case.
*/
[SCIx_ERI_IRQ] = {
.desc = "rx err",
.handler = sci_er_interrupt,
},
[SCIx_RXI_IRQ] = {
.desc = "rx full",
.handler = sci_rx_interrupt,
},
[SCIx_TXI_IRQ] = {
.desc = "tx empty",
.handler = sci_tx_interrupt,
},
[SCIx_BRI_IRQ] = {
.desc = "break",
.handler = sci_br_interrupt,
},
/*
* Special muxed handler.
*/
[SCIx_MUX_IRQ] = {
.desc = "mux",
.handler = sci_mpxed_interrupt,
},
};
static int sci_request_irq(struct sci_port *port)
{
struct uart_port *up = &port->port;
int i, j, ret = 0;
for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
struct sci_irq_desc *desc;
unsigned int irq;
if (SCIx_IRQ_IS_MUXED(port)) {
i = SCIx_MUX_IRQ;
irq = up->irq;
} else {
irq = port->cfg->irqs[i];
/*
* Certain port types won't support all of the
* available interrupt sources.
*/
if (unlikely(!irq))
continue;
}
desc = sci_irq_desc + i;
port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
dev_name(up->dev), desc->desc);
if (!port->irqstr[j]) {
dev_err(up->dev, "Failed to allocate %s IRQ string\n",
desc->desc);
goto out_nomem;
}
ret = request_irq(irq, desc->handler, up->irqflags,
port->irqstr[j], port);
if (unlikely(ret)) {
dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc);
goto out_noirq;
}
}
return 0;
out_noirq:
while (--i >= 0)
free_irq(port->cfg->irqs[i], port);
out_nomem:
while (--j >= 0)
kfree(port->irqstr[j]);
return ret;
}
static void sci_free_irq(struct sci_port *port)
{
int i;
/*
* Intentionally in reverse order so we iterate over the muxed
* IRQ first.
*/
for (i = 0; i < SCIx_NR_IRQS; i++) {
unsigned int irq = port->cfg->irqs[i];
/*
* Certain port types won't support all of the available
* interrupt sources.
*/
if (unlikely(!irq))
continue;
free_irq(port->cfg->irqs[i], port);
kfree(port->irqstr[i]);
if (SCIx_IRQ_IS_MUXED(port)) {
/* If there's only one IRQ, we're done. */
return;
}
}
}
static const char *sci_gpio_names[SCIx_NR_FNS] = {
"sck", "rxd", "txd", "cts", "rts",
};
static const char *sci_gpio_str(unsigned int index)
{
return sci_gpio_names[index];
}
static void __devinit sci_init_gpios(struct sci_port *port)
{
struct uart_port *up = &port->port;
int i;
if (!port->cfg)
return;
for (i = 0; i < SCIx_NR_FNS; i++) {
const char *desc;
int ret;
if (!port->cfg->gpios[i])
continue;
desc = sci_gpio_str(i);
port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s",
dev_name(up->dev), desc);
/*
* If we've failed the allocation, we can still continue
* on with a NULL string.
*/
if (!port->gpiostr[i])
dev_notice(up->dev, "%s string allocation failure\n",
desc);
ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]);
if (unlikely(ret != 0)) {
dev_notice(up->dev, "failed %s gpio request\n", desc);
/*
* If we can't get the GPIO for whatever reason,
* no point in keeping the verbose string around.
*/
kfree(port->gpiostr[i]);
}
}
}
static void sci_free_gpios(struct sci_port *port)
{
int i;
for (i = 0; i < SCIx_NR_FNS; i++)
if (port->cfg->gpios[i]) {
gpio_free(port->cfg->gpios[i]);
kfree(port->gpiostr[i]);
}
}
static unsigned int sci_tx_empty(struct uart_port *port)
{
unsigned short status = serial_port_in(port, SCxSR);
unsigned short in_tx_fifo = sci_txfill(port);
return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
}
/*
* Modem control is a bit of a mixed bag for SCI(F) ports. Generally
* CTS/RTS is supported in hardware by at least one port and controlled
* via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently
* handled via the ->init_pins() op, which is a bit of a one-way street,
* lacking any ability to defer pin control -- this will later be
* converted over to the GPIO framework).
*
* Other modes (such as loopback) are supported generically on certain
* port types, but not others. For these it's sufficient to test for the
* existence of the support register and simply ignore the port type.
*/
static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
if (mctrl & TIOCM_LOOP) {
struct plat_sci_reg *reg;
/*
* Standard loopback mode for SCFCR ports.
*/
reg = sci_getreg(port, SCFCR);
if (reg->size)
serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1);
}
}
static unsigned int sci_get_mctrl(struct uart_port *port)
{
/*
* CTS/RTS is handled in hardware when supported, while nothing
* else is wired up. Keep it simple and simply assert DSR/CAR.
*/
return TIOCM_DSR | TIOCM_CAR;
}
#ifdef CONFIG_SERIAL_SH_SCI_DMA
static void sci_dma_tx_complete(void *arg)
{
struct sci_port *s = arg;
struct uart_port *port = &s->port;
struct circ_buf *xmit = &port->state->xmit;
unsigned long flags;
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
spin_lock_irqsave(&port->lock, flags);
xmit->tail += sg_dma_len(&s->sg_tx);
xmit->tail &= UART_XMIT_SIZE - 1;
port->icount.tx += sg_dma_len(&s->sg_tx);
async_tx_ack(s->desc_tx);
s->desc_tx = NULL;
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (!uart_circ_empty(xmit)) {
s->cookie_tx = 0;
schedule_work(&s->work_tx);
} else {
s->cookie_tx = -EINVAL;
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 ctrl = serial_port_in(port, SCSCR);
serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
}
}
spin_unlock_irqrestore(&port->lock, flags);
}
/* Locking: called with port lock held */
static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty,
size_t count)
{
struct uart_port *port = &s->port;
int i, active, room;
room = tty_buffer_request_room(tty, count);
if (s->active_rx == s->cookie_rx[0]) {
active = 0;
} else if (s->active_rx == s->cookie_rx[1]) {
active = 1;
} else {
dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
return 0;
}
if (room < count)
dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
count - room);
if (!room)
return room;
for (i = 0; i < room; i++)
tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i],
TTY_NORMAL);
port->icount.rx += room;
return room;
}
static void sci_dma_rx_complete(void *arg)
{
struct sci_port *s = arg;
struct uart_port *port = &s->port;
struct tty_struct *tty = port->state->port.tty;
unsigned long flags;
int count;
dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx);
spin_lock_irqsave(&port->lock, flags);
count = sci_dma_rx_push(s, tty, s->buf_len_rx);
mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
spin_unlock_irqrestore(&port->lock, flags);
if (count)
tty_flip_buffer_push(tty);
schedule_work(&s->work_rx);
}
static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
{
struct dma_chan *chan = s->chan_rx;
struct uart_port *port = &s->port;
s->chan_rx = NULL;
s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
dma_release_channel(chan);
if (sg_dma_address(&s->sg_rx[0]))
dma_free_coherent(port->dev, s->buf_len_rx * 2,
sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
if (enable_pio)
sci_start_rx(port);
}
static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
{
struct dma_chan *chan = s->chan_tx;
struct uart_port *port = &s->port;
s->chan_tx = NULL;
s->cookie_tx = -EINVAL;
dma_release_channel(chan);
if (enable_pio)
sci_start_tx(port);
}
static void sci_submit_rx(struct sci_port *s)
{
struct dma_chan *chan = s->chan_rx;
int i;
for (i = 0; i < 2; i++) {
struct scatterlist *sg = &s->sg_rx[i];
struct dma_async_tx_descriptor *desc;
desc = dmaengine_prep_slave_sg(chan,
sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
if (desc) {
s->desc_rx[i] = desc;
desc->callback = sci_dma_rx_complete;
desc->callback_param = s;
s->cookie_rx[i] = desc->tx_submit(desc);
}
if (!desc || s->cookie_rx[i] < 0) {
if (i) {
async_tx_ack(s->desc_rx[0]);
s->cookie_rx[0] = -EINVAL;
}
if (desc) {
async_tx_ack(desc);
s->cookie_rx[i] = -EINVAL;
}
dev_warn(s->port.dev,
"failed to re-start DMA, using PIO\n");
sci_rx_dma_release(s, true);
return;
}
dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
s->cookie_rx[i], i);
}
s->active_rx = s->cookie_rx[0];
dma_async_issue_pending(chan);
}
static void work_fn_rx(struct work_struct *work)
{
struct sci_port *s = container_of(work, struct sci_port, work_rx);
struct uart_port *port = &s->port;
struct dma_async_tx_descriptor *desc;
int new;
if (s->active_rx == s->cookie_rx[0]) {
new = 0;
} else if (s->active_rx == s->cookie_rx[1]) {
new = 1;
} else {
dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
return;
}
desc = s->desc_rx[new];
if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
DMA_SUCCESS) {
/* Handle incomplete DMA receive */
struct tty_struct *tty = port->state->port.tty;
struct dma_chan *chan = s->chan_rx;
struct shdma_desc *sh_desc = container_of(desc,
struct shdma_desc, async_tx);
unsigned long flags;
int count;
chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
sh_desc->partial, sh_desc->cookie);
spin_lock_irqsave(&port->lock, flags);
count = sci_dma_rx_push(s, tty, sh_desc->partial);
spin_unlock_irqrestore(&port->lock, flags);
if (count)
tty_flip_buffer_push(tty);
sci_submit_rx(s);
return;
}
s->cookie_rx[new] = desc->tx_submit(desc);
if (s->cookie_rx[new] < 0) {
dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
sci_rx_dma_release(s, true);
return;
}
s->active_rx = s->cookie_rx[!new];
dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__,
s->cookie_rx[new], new, s->active_rx);
}
static void work_fn_tx(struct work_struct *work)
{
struct sci_port *s = container_of(work, struct sci_port, work_tx);
struct dma_async_tx_descriptor *desc;
struct dma_chan *chan = s->chan_tx;
struct uart_port *port = &s->port;
struct circ_buf *xmit = &port->state->xmit;
struct scatterlist *sg = &s->sg_tx;
/*
* DMA is idle now.
* Port xmit buffer is already mapped, and it is one page... Just adjust
* offsets and lengths. Since it is a circular buffer, we have to
* transmit till the end, and then the rest. Take the port lock to get a
* consistent xmit buffer state.
*/
spin_lock_irq(&port->lock);
sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
sg->offset;
sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
spin_unlock_irq(&port->lock);
BUG_ON(!sg_dma_len(sg));
desc = dmaengine_prep_slave_sg(chan,
sg, s->sg_len_tx, DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
/* switch to PIO */
sci_tx_dma_release(s, true);
return;
}
dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
spin_lock_irq(&port->lock);
s->desc_tx = desc;
desc->callback = sci_dma_tx_complete;
desc->callback_param = s;
spin_unlock_irq(&port->lock);
s->cookie_tx = desc->tx_submit(desc);
if (s->cookie_tx < 0) {
dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
/* switch to PIO */
sci_tx_dma_release(s, true);
return;
}
dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__,
xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
dma_async_issue_pending(chan);
}
#endif
static void sci_start_tx(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
unsigned short ctrl;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
u16 new, scr = serial_port_in(port, SCSCR);
if (s->chan_tx)
new = scr | 0x8000;
else
new = scr & ~0x8000;
if (new != scr)
serial_port_out(port, SCSCR, new);
}
if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
s->cookie_tx < 0) {
s->cookie_tx = 0;
schedule_work(&s->work_tx);
}
#endif
if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = serial_port_in(port, SCSCR);
serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
}
}
static void sci_stop_tx(struct uart_port *port)
{
unsigned short ctrl;
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
ctrl = serial_port_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x8000;
ctrl &= ~SCSCR_TIE;
serial_port_out(port, SCSCR, ctrl);
}
static void sci_start_rx(struct uart_port *port)
{
unsigned short ctrl;
ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
serial_port_out(port, SCSCR, ctrl);
}
static void sci_stop_rx(struct uart_port *port)
{
unsigned short ctrl;
ctrl = serial_port_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~0x4000;
ctrl &= ~port_rx_irq_mask(port);
serial_port_out(port, SCSCR, ctrl);
}
static void sci_enable_ms(struct uart_port *port)
{
/*
* Not supported by hardware, always a nop.
*/
}
static void sci_break_ctl(struct uart_port *port, int break_state)
{
struct sci_port *s = to_sci_port(port);
struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
unsigned short scscr, scsptr;
/* check wheter the port has SCSPTR */
if (!reg->size) {
/*
* Not supported by hardware. Most parts couple break and rx
* interrupts together, with break detection always enabled.
*/
return;
}
scsptr = serial_port_in(port, SCSPTR);
scscr = serial_port_in(port, SCSCR);
if (break_state == -1) {
scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT;
scscr &= ~SCSCR_TE;
} else {
scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO;
scscr |= SCSCR_TE;
}
serial_port_out(port, SCSPTR, scsptr);
serial_port_out(port, SCSCR, scscr);
}
#ifdef CONFIG_SERIAL_SH_SCI_DMA
static bool filter(struct dma_chan *chan, void *slave)
{
struct sh_dmae_slave *param = slave;
dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__,
param->shdma_slave.slave_id);
chan->private = &param->shdma_slave;
return true;
}
static void rx_timer_fn(unsigned long arg)
{
struct sci_port *s = (struct sci_port *)arg;
struct uart_port *port = &s->port;
u16 scr = serial_port_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
scr &= ~0x4000;
enable_irq(s->cfg->irqs[1]);
}
serial_port_out(port, SCSCR, scr | SCSCR_RIE);
dev_dbg(port->dev, "DMA Rx timed out\n");
schedule_work(&s->work_rx);
}
static void sci_request_dma(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
struct sh_dmae_slave *param;
struct dma_chan *chan;
dma_cap_mask_t mask;
int nent;
dev_dbg(port->dev, "%s: port %d\n", __func__,
port->line);
if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
return;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
param = &s->param_tx;
/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
param->shdma_slave.slave_id = s->cfg->dma_slave_tx;
s->cookie_tx = -EINVAL;
chan = dma_request_channel(mask, filter, param);
dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
if (chan) {
s->chan_tx = chan;
sg_init_table(&s->sg_tx, 1);
/* UART circular tx buffer is an aligned page. */
BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
if (!nent)
sci_tx_dma_release(s, false);
else
dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
sg_dma_len(&s->sg_tx),
port->state->xmit.buf, sg_dma_address(&s->sg_tx));
s->sg_len_tx = nent;
INIT_WORK(&s->work_tx, work_fn_tx);
}
param = &s->param_rx;
/* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
param->shdma_slave.slave_id = s->cfg->dma_slave_rx;
chan = dma_request_channel(mask, filter, param);
dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
if (chan) {
dma_addr_t dma[2];
void *buf[2];
int i;
s->chan_rx = chan;
s->buf_len_rx = 2 * max(16, (int)port->fifosize);
buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2,
&dma[0], GFP_KERNEL);
if (!buf[0]) {
dev_warn(port->dev,
"failed to allocate dma buffer, using PIO\n");
sci_rx_dma_release(s, true);
return;
}
buf[1] = buf[0] + s->buf_len_rx;
dma[1] = dma[0] + s->buf_len_rx;
for (i = 0; i < 2; i++) {
struct scatterlist *sg = &s->sg_rx[i];
sg_init_table(sg, 1);
sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
(int)buf[i] & ~PAGE_MASK);
sg_dma_address(sg) = dma[i];
}
INIT_WORK(&s->work_rx, work_fn_rx);
setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
sci_submit_rx(s);
}
}
static void sci_free_dma(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
if (s->chan_tx)
sci_tx_dma_release(s, false);
if (s->chan_rx)
sci_rx_dma_release(s, false);
}
#else
static inline void sci_request_dma(struct uart_port *port)
{
}
static inline void sci_free_dma(struct uart_port *port)
{
}
#endif
static int sci_startup(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
int ret;
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
sci_port_enable(s);
ret = sci_request_irq(s);
if (unlikely(ret < 0))
return ret;
sci_request_dma(port);
sci_start_tx(port);
sci_start_rx(port);
return 0;
}
static void sci_shutdown(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
sci_stop_rx(port);
sci_stop_tx(port);
sci_free_dma(port);
sci_free_irq(s);
sci_port_disable(s);
}
static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
unsigned long freq)
{
switch (algo_id) {
case SCBRR_ALGO_1:
return ((freq + 16 * bps) / (16 * bps) - 1);
case SCBRR_ALGO_2:
return ((freq + 16 * bps) / (32 * bps) - 1);
case SCBRR_ALGO_3:
return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
case SCBRR_ALGO_4:
return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
case SCBRR_ALGO_5:
return (((freq * 1000 / 32) / bps) - 1);
}
/* Warn, but use a safe default */
WARN_ON(1);
return ((freq + 16 * bps) / (32 * bps) - 1);
}
static void sci_reset(struct uart_port *port)
{
struct plat_sci_reg *reg;
unsigned int status;
do {
status = serial_port_in(port, SCxSR);
} while (!(status & SCxSR_TEND(port)));
serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
reg = sci_getreg(port, SCFCR);
if (reg->size)
serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
}
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct sci_port *s = to_sci_port(port);
struct plat_sci_reg *reg;
unsigned int baud, smr_val, max_baud;
int t = -1;
/*
* earlyprintk comes here early on with port->uartclk set to zero.
* the clock framework is not up and running at this point so here
* we assume that 115200 is the maximum baud rate. please note that
* the baud rate is not programmed during earlyprintk - it is assumed
* that the previous boot loader has enabled required clocks and
* setup the baud rate generator hardware for us already.
*/
max_baud = port->uartclk ? port->uartclk / 16 : 115200;
baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
if (likely(baud && port->uartclk))
t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk);
sci_port_enable(s);
sci_reset(port);
smr_val = serial_port_in(port, SCSMR) & 3;
if ((termios->c_cflag & CSIZE) == CS7)
smr_val |= 0x40;
if (termios->c_cflag & PARENB)
smr_val |= 0x20;
if (termios->c_cflag & PARODD)
smr_val |= 0x30;
if (termios->c_cflag & CSTOPB)
smr_val |= 0x08;
uart_update_timeout(port, termios->c_cflag, baud);
serial_port_out(port, SCSMR, smr_val);
dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t,
s->cfg->scscr);
if (t > 0) {
if (t >= 256) {
serial_port_out(port, SCSMR, (serial_port_in(port, SCSMR) & ~3) | 1);
t >>= 2;
} else
serial_port_out(port, SCSMR, serial_port_in(port, SCSMR) & ~3);
serial_port_out(port, SCBRR, t);
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
}
sci_init_pins(port, termios->c_cflag);
reg = sci_getreg(port, SCFCR);
if (reg->size) {
unsigned short ctrl = serial_port_in(port, SCFCR);
if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) {
if (termios->c_cflag & CRTSCTS)
ctrl |= SCFCR_MCE;
else
ctrl &= ~SCFCR_MCE;
}
/*
* As we've done a sci_reset() above, ensure we don't
* interfere with the FIFOs while toggling MCE. As the
* reset values could still be set, simply mask them out.
*/
ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST);
serial_port_out(port, SCFCR, ctrl);
}
serial_port_out(port, SCSCR, s->cfg->scscr);
#ifdef CONFIG_SERIAL_SH_SCI_DMA
/*
* Calculate delay for 1.5 DMA buffers: see
* drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits
* (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function
* calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)."
* Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO
* sizes), but it has been found out experimentally, that this is not
* enough: the driver too often needlessly runs on a DMA timeout. 20ms
* as a minimum seem to work perfectly.
*/
if (s->chan_rx) {
s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
port->fifosize / 2;
dev_dbg(port->dev,
"DMA Rx t-out %ums, tty t-out %u jiffies\n",
s->rx_timeout * 1000 / HZ, port->timeout);
if (s->rx_timeout < msecs_to_jiffies(20))
s->rx_timeout = msecs_to_jiffies(20);
}
#endif
if ((termios->c_cflag & CREAD) != 0)
sci_start_rx(port);
sci_port_disable(s);
}
static const char *sci_type(struct uart_port *port)
{
switch (port->type) {
case PORT_IRDA:
return "irda";
case PORT_SCI:
return "sci";
case PORT_SCIF:
return "scif";
case PORT_SCIFA:
return "scifa";
case PORT_SCIFB:
return "scifb";
}
return NULL;
}
static inline unsigned long sci_port_size(struct uart_port *port)
{
/*
* Pick an arbitrary size that encapsulates all of the base
* registers by default. This can be optimized later, or derived
* from platform resource data at such a time that ports begin to
* behave more erratically.
*/
return 64;
}
static int sci_remap_port(struct uart_port *port)
{
unsigned long size = sci_port_size(port);
/*
* Nothing to do if there's already an established membase.
*/
if (port->membase)
return 0;
if (port->flags & UPF_IOREMAP) {
port->membase = ioremap_nocache(port->mapbase, size);
if (unlikely(!port->membase)) {
dev_err(port->dev, "can't remap port#%d\n", port->line);
return -ENXIO;
}
} else {
/*
* For the simple (and majority of) cases where we don't
* need to do any remapping, just cast the cookie
* directly.
*/
port->membase = (void __iomem *)port->mapbase;
}
return 0;
}
static void sci_release_port(struct uart_port *port)
{
if (port->flags & UPF_IOREMAP) {
iounmap(port->membase);
port->membase = NULL;
}
release_mem_region(port->mapbase, sci_port_size(port));
}
static int sci_request_port(struct uart_port *port)
{
unsigned long size = sci_port_size(port);
struct resource *res;
int ret;
res = request_mem_region(port->mapbase, size, dev_name(port->dev));
if (unlikely(res == NULL))
return -EBUSY;
ret = sci_remap_port(port);
if (unlikely(ret != 0)) {
release_resource(res);
return ret;
}
return 0;
}
static void sci_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE) {
struct sci_port *sport = to_sci_port(port);
port->type = sport->cfg->type;
sci_request_port(port);
}
}
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
{
struct sci_port *s = to_sci_port(port);
if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
return -EINVAL;
if (ser->baud_base < 2400)
/* No paper tape reader for Mitch.. */
return -EINVAL;
return 0;
}
static struct uart_ops sci_uart_ops = {
.tx_empty = sci_tx_empty,
.set_mctrl = sci_set_mctrl,
.get_mctrl = sci_get_mctrl,
.start_tx = sci_start_tx,
.stop_tx = sci_stop_tx,
.stop_rx = sci_stop_rx,
.enable_ms = sci_enable_ms,
.break_ctl = sci_break_ctl,
.startup = sci_startup,
.shutdown = sci_shutdown,
.set_termios = sci_set_termios,
.type = sci_type,
.release_port = sci_release_port,
.request_port = sci_request_port,
.config_port = sci_config_port,
.verify_port = sci_verify_port,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = sci_poll_get_char,
.poll_put_char = sci_poll_put_char,
#endif
};
static int __devinit sci_init_single(struct platform_device *dev,
struct sci_port *sci_port,
unsigned int index,
struct plat_sci_port *p)
{
struct uart_port *port = &sci_port->port;
int ret;
sci_port->cfg = p;
port->ops = &sci_uart_ops;
port->iotype = UPIO_MEM;
port->line = index;
switch (p->type) {
case PORT_SCIFB:
port->fifosize = 256;
break;
case PORT_SCIFA:
port->fifosize = 64;
break;
case PORT_SCIF:
port->fifosize = 16;
break;
default:
port->fifosize = 1;
break;
}
if (p->regtype == SCIx_PROBE_REGTYPE) {
ret = sci_probe_regmap(p);
if (unlikely(ret))
return ret;
}
if (dev) {
sci_port->iclk = clk_get(&dev->dev, "sci_ick");
if (IS_ERR(sci_port->iclk)) {
sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
if (IS_ERR(sci_port->iclk)) {
dev_err(&dev->dev, "can't get iclk\n");
return PTR_ERR(sci_port->iclk);
}
}
/*
* The function clock is optional, ignore it if we can't
* find it.
*/
sci_port->fclk = clk_get(&dev->dev, "sci_fck");
if (IS_ERR(sci_port->fclk))
sci_port->fclk = NULL;
port->dev = &dev->dev;
sci_init_gpios(sci_port);
pm_runtime_enable(&dev->dev);
}
sci_port->break_timer.data = (unsigned long)sci_port;
sci_port->break_timer.function = sci_break_timer;
init_timer(&sci_port->break_timer);
/*
* Establish some sensible defaults for the error detection.
*/
if (!p->error_mask)
p->error_mask = (p->type == PORT_SCI) ?
SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
/*
* Establish sensible defaults for the overrun detection, unless
* the part has explicitly disabled support for it.
*/
if (p->overrun_bit != SCIx_NOT_SUPPORTED) {
if (p->type == PORT_SCI)
p->overrun_bit = 5;
else if (p->scbrr_algo_id == SCBRR_ALGO_4)
p->overrun_bit = 9;
else
p->overrun_bit = 0;
/*
* Make the error mask inclusive of overrun detection, if
* supported.
*/
p->error_mask |= (1 << p->overrun_bit);
}
port->mapbase = p->mapbase;
port->type = p->type;
port->flags = p->flags;
port->regshift = p->regshift;
/*
* The UART port needs an IRQ value, so we peg this to the RX IRQ
* for the multi-IRQ ports, which is where we are primarily
* concerned with the shutdown path synchronization.
*
* For the muxed case there's nothing more to do.
*/
port->irq = p->irqs[SCIx_RXI_IRQ];
port->irqflags = 0;
port->serial_in = sci_serial_in;
port->serial_out = sci_serial_out;
if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0)
dev_dbg(port->dev, "DMA tx %d, rx %d\n",
p->dma_slave_tx, p->dma_slave_rx);
return 0;
}
static void sci_cleanup_single(struct sci_port *port)
{
sci_free_gpios(port);
clk_put(port->iclk);
clk_put(port->fclk);
pm_runtime_disable(port->port.dev);
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
static void serial_console_putchar(struct uart_port *port, int ch)
{
sci_poll_put_char(port, ch);
}
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
*/
static void serial_console_write(struct console *co, const char *s,
unsigned count)
{
struct sci_port *sci_port = &sci_ports[co->index];
struct uart_port *port = &sci_port->port;
unsigned short bits;
sci_port_enable(sci_port);
uart_console_write(port, s, count, serial_console_putchar);
/* wait until fifo is empty and last bit has been transmitted */
bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
while ((serial_port_in(port, SCxSR) & bits) != bits)
cpu_relax();
sci_port_disable(sci_port);
}
static int __devinit serial_console_setup(struct console *co, char *options)
{
struct sci_port *sci_port;
struct uart_port *port;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
int ret;
/*
* Refuse to handle any bogus ports.
*/
if (co->index < 0 || co->index >= SCI_NPORTS)
return -ENODEV;
sci_port = &sci_ports[co->index];
port = &sci_port->port;
/*
* Refuse to handle uninitialized ports.
*/
if (!port->ops)
return -ENODEV;
ret = sci_remap_port(port);
if (unlikely(ret != 0))
return ret;
sci_port_enable(sci_port);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
sci_port_disable(sci_port);
return uart_set_options(port, co, baud, parity, bits, flow);
}
static struct console serial_console = {
.name = "ttySC",
.device = uart_console_device,
.write = serial_console_write,
.setup = serial_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &sci_uart_driver,
};
static struct console early_serial_console = {
.name = "early_ttySC",
.write = serial_console_write,
.flags = CON_PRINTBUFFER,
.index = -1,
};
static char early_serial_buf[32];
static int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
{
struct plat_sci_port *cfg = pdev->dev.platform_data;
if (early_serial_console.data)
return -EEXIST;
early_serial_console.index = pdev->id;
sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg);
serial_console_setup(&early_serial_console, early_serial_buf);
if (!strstr(early_serial_buf, "keep"))
early_serial_console.flags |= CON_BOOT;
register_console(&early_serial_console);
return 0;
}
#define uart_console(port) ((port)->cons->index == (port)->line)
static int sci_runtime_suspend(struct device *dev)
{
struct sci_port *sci_port = dev_get_drvdata(dev);
struct uart_port *port = &sci_port->port;
if (uart_console(port)) {
struct plat_sci_reg *reg;
sci_port->saved_smr = serial_port_in(port, SCSMR);
sci_port->saved_brr = serial_port_in(port, SCBRR);
reg = sci_getreg(port, SCFCR);
if (reg->size)
sci_port->saved_fcr = serial_port_in(port, SCFCR);
else
sci_port->saved_fcr = 0;
}
return 0;
}
static int sci_runtime_resume(struct device *dev)
{
struct sci_port *sci_port = dev_get_drvdata(dev);
struct uart_port *port = &sci_port->port;
if (uart_console(port)) {
sci_reset(port);
serial_port_out(port, SCSMR, sci_port->saved_smr);
serial_port_out(port, SCBRR, sci_port->saved_brr);
if (sci_port->saved_fcr)
serial_port_out(port, SCFCR, sci_port->saved_fcr);
serial_port_out(port, SCSCR, sci_port->cfg->scscr);
}
return 0;
}
#define SCI_CONSOLE (&serial_console)
#else
static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
{
return -EINVAL;
}
#define SCI_CONSOLE NULL
#define sci_runtime_suspend NULL
#define sci_runtime_resume NULL
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
static char banner[] __initdata =
KERN_INFO "SuperH SCI(F) driver initialized\n";
static struct uart_driver sci_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "sci",
.dev_name = "ttySC",
.major = SCI_MAJOR,
.minor = SCI_MINOR_START,
.nr = SCI_NPORTS,
.cons = SCI_CONSOLE,
};
static int sci_remove(struct platform_device *dev)
{
struct sci_port *port = platform_get_drvdata(dev);
cpufreq_unregister_notifier(&port->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
uart_remove_one_port(&sci_uart_driver, &port->port);
sci_cleanup_single(port);
return 0;
}
static int __devinit sci_probe_single(struct platform_device *dev,
unsigned int index,
struct plat_sci_port *p,
struct sci_port *sciport)
{
int ret;
/* Sanity check */
if (unlikely(index >= SCI_NPORTS)) {
dev_notice(&dev->dev, "Attempting to register port "
"%d when only %d are available.\n",
index+1, SCI_NPORTS);
dev_notice(&dev->dev, "Consider bumping "
"CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
return -EINVAL;
}
ret = sci_init_single(dev, sciport, index, p);
if (ret)
return ret;
ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
if (ret) {
sci_cleanup_single(sciport);
return ret;
}
return 0;
}
static int __devinit sci_probe(struct platform_device *dev)
{
struct plat_sci_port *p = dev->dev.platform_data;
struct sci_port *sp = &sci_ports[dev->id];
int ret;
/*
* If we've come here via earlyprintk initialization, head off to
* the special early probe. We don't have sufficient device state
* to make it beyond this yet.
*/
if (is_early_platform_device(dev))
return sci_probe_earlyprintk(dev);
platform_set_drvdata(dev, sp);
ret = sci_probe_single(dev, dev->id, p, sp);
if (ret)
return ret;
sp->freq_transition.notifier_call = sci_notifier;
ret = cpufreq_register_notifier(&sp->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
if (unlikely(ret < 0)) {
sci_cleanup_single(sp);
return ret;
}
#ifdef CONFIG_SH_STANDARD_BIOS
sh_bios_gdb_detach();
#endif
return 0;
}
static int sci_suspend(struct device *dev)
{
struct sci_port *sport = dev_get_drvdata(dev);
if (sport)
uart_suspend_port(&sci_uart_driver, &sport->port);
return 0;
}
static int sci_resume(struct device *dev)
{
struct sci_port *sport = dev_get_drvdata(dev);
if (sport)
uart_resume_port(&sci_uart_driver, &sport->port);
return 0;
}
static const struct dev_pm_ops sci_dev_pm_ops = {
.runtime_suspend = sci_runtime_suspend,
.runtime_resume = sci_runtime_resume,
.suspend = sci_suspend,
.resume = sci_resume,
};
static struct platform_driver sci_driver = {
.probe = sci_probe,
.remove = sci_remove,
.driver = {
.name = "sh-sci",
.owner = THIS_MODULE,
.pm = &sci_dev_pm_ops,
},
};
static int __init sci_init(void)
{
int ret;
printk(banner);
ret = uart_register_driver(&sci_uart_driver);
if (likely(ret == 0)) {
ret = platform_driver_register(&sci_driver);
if (unlikely(ret))
uart_unregister_driver(&sci_uart_driver);
}
return ret;
}
static void __exit sci_exit(void)
{
platform_driver_unregister(&sci_driver);
uart_unregister_driver(&sci_uart_driver);
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
early_platform_init_buffer("earlyprintk", &sci_driver,
early_serial_buf, ARRAY_SIZE(early_serial_buf));
#endif
module_init(sci_init);
module_exit(sci_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:sh-sci");
MODULE_AUTHOR("Paul Mundt");
MODULE_DESCRIPTION("SuperH SCI(F) serial driver");