| /****************************************************************************** |
| * |
| * Module Name: tbxfload - Table load/unload external interfaces |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2017, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #define EXPORT_ACPI_INTERFACES |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acnamesp.h" |
| #include "actables.h" |
| #include "acevents.h" |
| |
| #define _COMPONENT ACPI_TABLES |
| ACPI_MODULE_NAME("tbxfload") |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_load_tables |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT |
| * |
| ******************************************************************************/ |
| acpi_status ACPI_INIT_FUNCTION acpi_load_tables(void) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(acpi_load_tables); |
| |
| /* |
| * Install the default operation region handlers. These are the |
| * handlers that are defined by the ACPI specification to be |
| * "always accessible" -- namely, system_memory, system_IO, and |
| * PCI_Config. This also means that no _REG methods need to be |
| * run for these address spaces. We need to have these handlers |
| * installed before any AML code can be executed, especially any |
| * module-level code (11/2015). |
| * Note that we allow OSPMs to install their own region handlers |
| * between acpi_initialize_subsystem() and acpi_load_tables() to use |
| * their customized default region handlers. |
| */ |
| status = acpi_ev_install_region_handlers(); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, |
| "During Region initialization")); |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Load the namespace from the tables */ |
| |
| status = acpi_tb_load_namespace(); |
| |
| /* Don't let single failures abort the load */ |
| |
| if (status == AE_CTRL_TERMINATE) { |
| status = AE_OK; |
| } |
| |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, |
| "While loading namespace from ACPI tables")); |
| } |
| |
| if (acpi_gbl_parse_table_as_term_list |
| || !acpi_gbl_group_module_level_code) { |
| /* |
| * Initialize the objects that remain uninitialized. This |
| * runs the executable AML that may be part of the |
| * declaration of these objects: |
| * operation_regions, buffer_fields, Buffers, and Packages. |
| */ |
| status = acpi_ns_initialize_objects(); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| } |
| |
| acpi_gbl_namespace_initialized = TRUE; |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL_INIT(acpi_load_tables) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_tb_load_namespace |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in |
| * the RSDT/XSDT. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_tb_load_namespace(void) |
| { |
| acpi_status status; |
| u32 i; |
| struct acpi_table_header *new_dsdt; |
| struct acpi_table_desc *table; |
| u32 tables_loaded = 0; |
| u32 tables_failed = 0; |
| |
| ACPI_FUNCTION_TRACE(tb_load_namespace); |
| |
| (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); |
| |
| /* |
| * Load the namespace. The DSDT is required, but any SSDT and |
| * PSDT tables are optional. Verify the DSDT. |
| */ |
| table = &acpi_gbl_root_table_list.tables[acpi_gbl_dsdt_index]; |
| |
| if (!acpi_gbl_root_table_list.current_table_count || |
| !ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_DSDT) || |
| ACPI_FAILURE(acpi_tb_validate_table(table))) { |
| status = AE_NO_ACPI_TABLES; |
| goto unlock_and_exit; |
| } |
| |
| /* |
| * Save the DSDT pointer for simple access. This is the mapped memory |
| * address. We must take care here because the address of the .Tables |
| * array can change dynamically as tables are loaded at run-time. Note: |
| * .Pointer field is not validated until after call to acpi_tb_validate_table. |
| */ |
| acpi_gbl_DSDT = table->pointer; |
| |
| /* |
| * Optionally copy the entire DSDT to local memory (instead of simply |
| * mapping it.) There are some BIOSs that corrupt or replace the original |
| * DSDT, creating the need for this option. Default is FALSE, do not copy |
| * the DSDT. |
| */ |
| if (acpi_gbl_copy_dsdt_locally) { |
| new_dsdt = acpi_tb_copy_dsdt(acpi_gbl_dsdt_index); |
| if (new_dsdt) { |
| acpi_gbl_DSDT = new_dsdt; |
| } |
| } |
| |
| /* |
| * Save the original DSDT header for detection of table corruption |
| * and/or replacement of the DSDT from outside the OS. |
| */ |
| memcpy(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT, |
| sizeof(struct acpi_table_header)); |
| |
| /* Load and parse tables */ |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); |
| status = acpi_ns_load_table(acpi_gbl_dsdt_index, acpi_gbl_root_node); |
| (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "[DSDT] table load failed")); |
| tables_failed++; |
| } else { |
| tables_loaded++; |
| } |
| |
| /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */ |
| |
| for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) { |
| table = &acpi_gbl_root_table_list.tables[i]; |
| |
| if (!acpi_gbl_root_table_list.tables[i].address || |
| (!ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_SSDT) |
| && !ACPI_COMPARE_NAME(table->signature.ascii, |
| ACPI_SIG_PSDT) |
| && !ACPI_COMPARE_NAME(table->signature.ascii, |
| ACPI_SIG_OSDT)) |
| || ACPI_FAILURE(acpi_tb_validate_table(table))) { |
| continue; |
| } |
| |
| /* Ignore errors while loading tables, get as many as possible */ |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); |
| status = acpi_ns_load_table(i, acpi_gbl_root_node); |
| (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, |
| "(%4.4s:%8.8s) while loading table", |
| table->signature.ascii, |
| table->pointer->oem_table_id)); |
| |
| tables_failed++; |
| |
| ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, |
| "Table [%4.4s:%8.8s] (id FF) - Table namespace load failed\n\n", |
| table->signature.ascii, |
| table->pointer->oem_table_id)); |
| } else { |
| tables_loaded++; |
| } |
| } |
| |
| if (!tables_failed) { |
| ACPI_INFO(("%u ACPI AML tables successfully acquired and loaded", tables_loaded)); |
| } else { |
| ACPI_ERROR((AE_INFO, |
| "%u table load failures, %u successful", |
| tables_failed, tables_loaded)); |
| |
| /* Indicate at least one failure */ |
| |
| status = AE_CTRL_TERMINATE; |
| } |
| |
| #ifdef ACPI_APPLICATION |
| ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "\n")); |
| #endif |
| |
| unlock_and_exit: |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_install_table |
| * |
| * PARAMETERS: address - Address of the ACPI table to be installed. |
| * physical - Whether the address is a physical table |
| * address or not |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Dynamically install an ACPI table. |
| * Note: This function should only be invoked after |
| * acpi_initialize_tables() and before acpi_load_tables(). |
| * |
| ******************************************************************************/ |
| |
| acpi_status ACPI_INIT_FUNCTION |
| acpi_install_table(acpi_physical_address address, u8 physical) |
| { |
| acpi_status status; |
| u8 flags; |
| u32 table_index; |
| |
| ACPI_FUNCTION_TRACE(acpi_install_table); |
| |
| if (physical) { |
| flags = ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL; |
| } else { |
| flags = ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL; |
| } |
| |
| status = acpi_tb_install_standard_table(address, flags, |
| FALSE, FALSE, &table_index); |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL_INIT(acpi_install_table) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_load_table |
| * |
| * PARAMETERS: table - Pointer to a buffer containing the ACPI |
| * table to be loaded. |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must |
| * be a valid ACPI table with a valid ACPI table header. |
| * Note1: Mainly intended to support hotplug addition of SSDTs. |
| * Note2: Does not copy the incoming table. User is responsible |
| * to ensure that the table is not deleted or unmapped. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_load_table(struct acpi_table_header *table) |
| { |
| acpi_status status; |
| u32 table_index; |
| |
| ACPI_FUNCTION_TRACE(acpi_load_table); |
| |
| /* Parameter validation */ |
| |
| if (!table) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* Install the table and load it into the namespace */ |
| |
| ACPI_INFO(("Host-directed Dynamic ACPI Table Load:")); |
| status = acpi_tb_install_and_load_table(ACPI_PTR_TO_PHYSADDR(table), |
| ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL, |
| FALSE, &table_index); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_load_table) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_unload_parent_table |
| * |
| * PARAMETERS: object - Handle to any namespace object owned by |
| * the table to be unloaded |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads |
| * the table and deletes all namespace objects associated with |
| * that table. Unloading of the DSDT is not allowed. |
| * Note: Mainly intended to support hotplug removal of SSDTs. |
| * |
| ******************************************************************************/ |
| acpi_status acpi_unload_parent_table(acpi_handle object) |
| { |
| struct acpi_namespace_node *node = |
| ACPI_CAST_PTR(struct acpi_namespace_node, object); |
| acpi_status status = AE_NOT_EXIST; |
| acpi_owner_id owner_id; |
| u32 i; |
| |
| ACPI_FUNCTION_TRACE(acpi_unload_parent_table); |
| |
| /* Parameter validation */ |
| |
| if (!object) { |
| return_ACPI_STATUS(AE_BAD_PARAMETER); |
| } |
| |
| /* |
| * The node owner_id is currently the same as the parent table ID. |
| * However, this could change in the future. |
| */ |
| owner_id = node->owner_id; |
| if (!owner_id) { |
| |
| /* owner_id==0 means DSDT is the owner. DSDT cannot be unloaded */ |
| |
| return_ACPI_STATUS(AE_TYPE); |
| } |
| |
| /* Must acquire the table lock during this operation */ |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Find the table in the global table list */ |
| |
| for (i = 0; i < acpi_gbl_root_table_list.current_table_count; i++) { |
| if (owner_id != acpi_gbl_root_table_list.tables[i].owner_id) { |
| continue; |
| } |
| |
| /* |
| * Allow unload of SSDT and OEMx tables only. Do not allow unload |
| * of the DSDT. No other types of tables should get here, since |
| * only these types can contain AML and thus are the only types |
| * that can create namespace objects. |
| */ |
| if (ACPI_COMPARE_NAME |
| (acpi_gbl_root_table_list.tables[i].signature.ascii, |
| ACPI_SIG_DSDT)) { |
| status = AE_TYPE; |
| break; |
| } |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); |
| status = acpi_tb_unload_table(i); |
| (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); |
| break; |
| } |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_TABLES); |
| return_ACPI_STATUS(status); |
| } |
| |
| ACPI_EXPORT_SYMBOL(acpi_unload_parent_table) |