| /* |
| * mtip32xx.h - Header file for the P320 SSD Block Driver |
| * Copyright (C) 2011 Micron Technology, Inc. |
| * |
| * Portions of this code were derived from works subjected to the |
| * following copyright: |
| * Copyright (C) 2009 Integrated Device Technology, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #ifndef __MTIP32XX_H__ |
| #define __MTIP32XX_H__ |
| |
| #include <linux/spinlock.h> |
| #include <linux/rwsem.h> |
| #include <linux/ata.h> |
| #include <linux/interrupt.h> |
| #include <linux/genhd.h> |
| #include <linux/version.h> |
| |
| /* Offset of Subsystem Device ID in pci confoguration space */ |
| #define PCI_SUBSYSTEM_DEVICEID 0x2E |
| |
| /* offset of Device Control register in PCIe extended capabilites space */ |
| #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 |
| |
| /* # of times to retry timed out/failed IOs */ |
| #define MTIP_MAX_RETRIES 2 |
| |
| /* Various timeout values in ms */ |
| #define MTIP_NCQ_COMMAND_TIMEOUT_MS 5000 |
| #define MTIP_IOCTL_COMMAND_TIMEOUT_MS 5000 |
| #define MTIP_INTERNAL_COMMAND_TIMEOUT_MS 5000 |
| |
| /* check for timeouts every 500ms */ |
| #define MTIP_TIMEOUT_CHECK_PERIOD 500 |
| |
| /* ftl rebuild */ |
| #define MTIP_FTL_REBUILD_OFFSET 142 |
| #define MTIP_FTL_REBUILD_MAGIC 0xED51 |
| #define MTIP_FTL_REBUILD_TIMEOUT_MS 2400000 |
| |
| /* Macro to extract the tag bit number from a tag value. */ |
| #define MTIP_TAG_BIT(tag) (tag & 0x1F) |
| |
| /* |
| * Macro to extract the tag index from a tag value. The index |
| * is used to access the correct s_active/Command Issue register based |
| * on the tag value. |
| */ |
| #define MTIP_TAG_INDEX(tag) (tag >> 5) |
| |
| /* |
| * Maximum number of scatter gather entries |
| * a single command may have. |
| */ |
| #define MTIP_MAX_SG 128 |
| |
| /* |
| * Maximum number of slot groups (Command Issue & s_active registers) |
| * NOTE: This is the driver maximum; check dd->slot_groups for actual value. |
| */ |
| #define MTIP_MAX_SLOT_GROUPS 8 |
| |
| /* Internal command tag. */ |
| #define MTIP_TAG_INTERNAL 0 |
| |
| /* Micron Vendor ID & P320x SSD Device ID */ |
| #define PCI_VENDOR_ID_MICRON 0x1344 |
| #define P320_DEVICE_ID 0x5150 |
| |
| /* Driver name and version strings */ |
| #define MTIP_DRV_NAME "mtip32xx" |
| #define MTIP_DRV_VERSION "1.2.6os3" |
| |
| /* Maximum number of minor device numbers per device. */ |
| #define MTIP_MAX_MINORS 16 |
| |
| /* Maximum number of supported command slots. */ |
| #define MTIP_MAX_COMMAND_SLOTS (MTIP_MAX_SLOT_GROUPS * 32) |
| |
| /* |
| * Per-tag bitfield size in longs. |
| * Linux bit manipulation functions |
| * (i.e. test_and_set_bit, find_next_zero_bit) |
| * manipulate memory in longs, so we try to make the math work. |
| * take the slot groups and find the number of longs, rounding up. |
| * Careful! i386 and x86_64 use different size longs! |
| */ |
| #define U32_PER_LONG (sizeof(long) / sizeof(u32)) |
| #define SLOTBITS_IN_LONGS ((MTIP_MAX_SLOT_GROUPS + \ |
| (U32_PER_LONG-1))/U32_PER_LONG) |
| |
| /* BAR number used to access the HBA registers. */ |
| #define MTIP_ABAR 5 |
| |
| #ifdef DEBUG |
| #define dbg_printk(format, arg...) \ |
| printk(pr_fmt(format), ##arg); |
| #else |
| #define dbg_printk(format, arg...) |
| #endif |
| |
| #define __force_bit2int (unsigned int __force) |
| |
| enum { |
| /* below are bit numbers in 'flags' defined in mtip_port */ |
| MTIP_PF_IC_ACTIVE_BIT = 0, /* pio/ioctl */ |
| MTIP_PF_EH_ACTIVE_BIT = 1, /* error handling */ |
| MTIP_PF_SE_ACTIVE_BIT = 2, /* secure erase */ |
| MTIP_PF_DM_ACTIVE_BIT = 3, /* download microcde */ |
| MTIP_PF_PAUSE_IO = ((1 << MTIP_PF_IC_ACTIVE_BIT) | \ |
| (1 << MTIP_PF_EH_ACTIVE_BIT) | \ |
| (1 << MTIP_PF_SE_ACTIVE_BIT) | \ |
| (1 << MTIP_PF_DM_ACTIVE_BIT)), |
| |
| MTIP_PF_SVC_THD_ACTIVE_BIT = 4, |
| MTIP_PF_ISSUE_CMDS_BIT = 5, |
| MTIP_PF_REBUILD_BIT = 6, |
| MTIP_PF_SVC_THD_STOP_BIT = 8, |
| |
| /* below are bit numbers in 'dd_flag' defined in driver_data */ |
| MTIP_DDF_REMOVE_PENDING_BIT = 1, |
| MTIP_DDF_OVER_TEMP_BIT = 2, |
| MTIP_DDF_WRITE_PROTECT_BIT = 3, |
| MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \ |
| (1 << MTIP_DDF_OVER_TEMP_BIT) | \ |
| (1 << MTIP_DDF_WRITE_PROTECT_BIT)), |
| |
| MTIP_DDF_CLEANUP_BIT = 5, |
| MTIP_DDF_RESUME_BIT = 6, |
| MTIP_DDF_INIT_DONE_BIT = 7, |
| MTIP_DDF_REBUILD_FAILED_BIT = 8, |
| }; |
| |
| __packed struct smart_attr{ |
| u8 attr_id; |
| u16 flags; |
| u8 cur; |
| u8 worst; |
| u32 data; |
| u8 res[3]; |
| }; |
| |
| /* Register Frame Information Structure (FIS), host to device. */ |
| struct host_to_dev_fis { |
| /* |
| * FIS type. |
| * - 27h Register FIS, host to device. |
| * - 34h Register FIS, device to host. |
| * - 39h DMA Activate FIS, device to host. |
| * - 41h DMA Setup FIS, bi-directional. |
| * - 46h Data FIS, bi-directional. |
| * - 58h BIST Activate FIS, bi-directional. |
| * - 5Fh PIO Setup FIS, device to host. |
| * - A1h Set Device Bits FIS, device to host. |
| */ |
| unsigned char type; |
| unsigned char opts; |
| unsigned char command; |
| unsigned char features; |
| |
| union { |
| unsigned char lba_low; |
| unsigned char sector; |
| }; |
| union { |
| unsigned char lba_mid; |
| unsigned char cyl_low; |
| }; |
| union { |
| unsigned char lba_hi; |
| unsigned char cyl_hi; |
| }; |
| union { |
| unsigned char device; |
| unsigned char head; |
| }; |
| |
| union { |
| unsigned char lba_low_ex; |
| unsigned char sector_ex; |
| }; |
| union { |
| unsigned char lba_mid_ex; |
| unsigned char cyl_low_ex; |
| }; |
| union { |
| unsigned char lba_hi_ex; |
| unsigned char cyl_hi_ex; |
| }; |
| unsigned char features_ex; |
| |
| unsigned char sect_count; |
| unsigned char sect_cnt_ex; |
| unsigned char res2; |
| unsigned char control; |
| |
| unsigned int res3; |
| }; |
| |
| /* Command header structure. */ |
| struct mtip_cmd_hdr { |
| /* |
| * Command options. |
| * - Bits 31:16 Number of PRD entries. |
| * - Bits 15:8 Unused in this implementation. |
| * - Bit 7 Prefetch bit, informs the drive to prefetch PRD entries. |
| * - Bit 6 Write bit, should be set when writing data to the device. |
| * - Bit 5 Unused in this implementation. |
| * - Bits 4:0 Length of the command FIS in DWords (DWord = 4 bytes). |
| */ |
| unsigned int opts; |
| /* This field is unsed when using NCQ. */ |
| union { |
| unsigned int byte_count; |
| unsigned int status; |
| }; |
| /* |
| * Lower 32 bits of the command table address associated with this |
| * header. The command table addresses must be 128 byte aligned. |
| */ |
| unsigned int ctba; |
| /* |
| * If 64 bit addressing is used this field is the upper 32 bits |
| * of the command table address associated with this command. |
| */ |
| unsigned int ctbau; |
| /* Reserved and unused. */ |
| unsigned int res[4]; |
| }; |
| |
| /* Command scatter gather structure (PRD). */ |
| struct mtip_cmd_sg { |
| /* |
| * Low 32 bits of the data buffer address. For P320 this |
| * address must be 8 byte aligned signified by bits 2:0 being |
| * set to 0. |
| */ |
| unsigned int dba; |
| /* |
| * When 64 bit addressing is used this field is the upper |
| * 32 bits of the data buffer address. |
| */ |
| unsigned int dba_upper; |
| /* Unused. */ |
| unsigned int reserved; |
| /* |
| * Bit 31: interrupt when this data block has been transferred. |
| * Bits 30..22: reserved |
| * Bits 21..0: byte count (minus 1). For P320 the byte count must be |
| * 8 byte aligned signified by bits 2:0 being set to 1. |
| */ |
| unsigned int info; |
| }; |
| struct mtip_port; |
| |
| /* Structure used to describe a command. */ |
| struct mtip_cmd { |
| |
| struct mtip_cmd_hdr *command_header; /* ptr to command header entry */ |
| |
| dma_addr_t command_header_dma; /* corresponding physical address */ |
| |
| void *command; /* ptr to command table entry */ |
| |
| dma_addr_t command_dma; /* corresponding physical address */ |
| |
| void *comp_data; /* data passed to completion function comp_func() */ |
| /* |
| * Completion function called by the ISR upon completion of |
| * a command. |
| */ |
| void (*comp_func)(struct mtip_port *port, |
| int tag, |
| void *data, |
| int status); |
| /* Additional callback function that may be called by comp_func() */ |
| void (*async_callback)(void *data, int status); |
| |
| void *async_data; /* Addl. data passed to async_callback() */ |
| |
| int scatter_ents; /* Number of scatter list entries used */ |
| |
| struct scatterlist sg[MTIP_MAX_SG]; /* Scatter list entries */ |
| |
| int retries; /* The number of retries left for this command. */ |
| |
| int direction; /* Data transfer direction */ |
| |
| unsigned long comp_time; /* command completion time, in jiffies */ |
| |
| atomic_t active; /* declares if this command sent to the drive. */ |
| }; |
| |
| /* Structure used to describe a port. */ |
| struct mtip_port { |
| /* Pointer back to the driver data for this port. */ |
| struct driver_data *dd; |
| /* |
| * Used to determine if the data pointed to by the |
| * identify field is valid. |
| */ |
| unsigned long identify_valid; |
| /* Base address of the memory mapped IO for the port. */ |
| void __iomem *mmio; |
| /* Array of pointers to the memory mapped s_active registers. */ |
| void __iomem *s_active[MTIP_MAX_SLOT_GROUPS]; |
| /* Array of pointers to the memory mapped completed registers. */ |
| void __iomem *completed[MTIP_MAX_SLOT_GROUPS]; |
| /* Array of pointers to the memory mapped Command Issue registers. */ |
| void __iomem *cmd_issue[MTIP_MAX_SLOT_GROUPS]; |
| /* |
| * Pointer to the beginning of the command header memory as used |
| * by the driver. |
| */ |
| void *command_list; |
| /* |
| * Pointer to the beginning of the command header memory as used |
| * by the DMA. |
| */ |
| dma_addr_t command_list_dma; |
| /* |
| * Pointer to the beginning of the RX FIS memory as used |
| * by the driver. |
| */ |
| void *rxfis; |
| /* |
| * Pointer to the beginning of the RX FIS memory as used |
| * by the DMA. |
| */ |
| dma_addr_t rxfis_dma; |
| /* |
| * Pointer to the beginning of the command table memory as used |
| * by the driver. |
| */ |
| void *command_table; |
| /* |
| * Pointer to the beginning of the command table memory as used |
| * by the DMA. |
| */ |
| dma_addr_t command_tbl_dma; |
| /* |
| * Pointer to the beginning of the identify data memory as used |
| * by the driver. |
| */ |
| u16 *identify; |
| /* |
| * Pointer to the beginning of the identify data memory as used |
| * by the DMA. |
| */ |
| dma_addr_t identify_dma; |
| /* |
| * Pointer to the beginning of a sector buffer that is used |
| * by the driver when issuing internal commands. |
| */ |
| u16 *sector_buffer; |
| /* |
| * Pointer to the beginning of a sector buffer that is used |
| * by the DMA when the driver issues internal commands. |
| */ |
| dma_addr_t sector_buffer_dma; |
| /* |
| * Bit significant, used to determine if a command slot has |
| * been allocated. i.e. the slot is in use. Bits are cleared |
| * when the command slot and all associated data structures |
| * are no longer needed. |
| */ |
| u16 *log_buf; |
| dma_addr_t log_buf_dma; |
| |
| u8 *smart_buf; |
| dma_addr_t smart_buf_dma; |
| |
| unsigned long allocated[SLOTBITS_IN_LONGS]; |
| /* |
| * used to queue commands when an internal command is in progress |
| * or error handling is active |
| */ |
| unsigned long cmds_to_issue[SLOTBITS_IN_LONGS]; |
| /* |
| * Array of command slots. Structure includes pointers to the |
| * command header and command table, and completion function and data |
| * pointers. |
| */ |
| struct mtip_cmd commands[MTIP_MAX_COMMAND_SLOTS]; |
| /* Used by mtip_service_thread to wait for an event */ |
| wait_queue_head_t svc_wait; |
| /* |
| * indicates the state of the port. Also, helps the service thread |
| * to determine its action on wake up. |
| */ |
| unsigned long flags; |
| /* |
| * Timer used to complete commands that have been active for too long. |
| */ |
| struct timer_list cmd_timer; |
| unsigned long ic_pause_timer; |
| /* |
| * Semaphore used to block threads if there are no |
| * command slots available. |
| */ |
| struct semaphore cmd_slot; |
| /* Spinlock for working around command-issue bug. */ |
| spinlock_t cmd_issue_lock; |
| }; |
| |
| /* |
| * Driver private data structure. |
| * |
| * One structure is allocated per probed device. |
| */ |
| struct driver_data { |
| void __iomem *mmio; /* Base address of the HBA registers. */ |
| |
| int major; /* Major device number. */ |
| |
| int instance; /* Instance number. First device probed is 0, ... */ |
| |
| struct gendisk *disk; /* Pointer to our gendisk structure. */ |
| |
| struct pci_dev *pdev; /* Pointer to the PCI device structure. */ |
| |
| struct request_queue *queue; /* Our request queue. */ |
| |
| struct mtip_port *port; /* Pointer to the port data structure. */ |
| |
| /* Tasklet used to process the bottom half of the ISR. */ |
| struct tasklet_struct tasklet; |
| |
| unsigned product_type; /* magic value declaring the product type */ |
| |
| unsigned slot_groups; /* number of slot groups the product supports */ |
| |
| unsigned long index; /* Index to determine the disk name */ |
| |
| unsigned long dd_flag; /* NOTE: use atomic bit operations on this */ |
| |
| struct task_struct *mtip_svc_handler; /* task_struct of svc thd */ |
| }; |
| |
| #endif |