| /* |
| * I2C link layer for the NXP NCI driver |
| * |
| * Copyright (C) 2014 NXP Semiconductors All rights reserved. |
| * Copyright (C) 2012-2015 Intel Corporation. All rights reserved. |
| * |
| * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> |
| * Authors: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com> |
| * |
| * Derived from PN544 device driver: |
| * Copyright (C) 2012 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/miscdevice.h> |
| #include <linux/module.h> |
| #include <linux/nfc.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/of_gpio.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_data/nxp-nci.h> |
| #include <linux/unaligned/access_ok.h> |
| |
| #include <net/nfc/nfc.h> |
| |
| #include "nxp-nci.h" |
| |
| #define NXP_NCI_I2C_DRIVER_NAME "nxp-nci_i2c" |
| |
| #define NXP_NCI_I2C_MAX_PAYLOAD 32 |
| |
| struct nxp_nci_i2c_phy { |
| struct i2c_client *i2c_dev; |
| struct nci_dev *ndev; |
| |
| unsigned int gpio_en; |
| unsigned int gpio_fw; |
| unsigned int gpio_irq; |
| |
| int hard_fault; /* |
| * < 0 if hardware error occurred (e.g. i2c err) |
| * and prevents normal operation. |
| */ |
| }; |
| |
| static int nxp_nci_i2c_set_mode(void *phy_id, |
| enum nxp_nci_mode mode) |
| { |
| struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id; |
| |
| gpio_set_value(phy->gpio_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0); |
| gpio_set_value(phy->gpio_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0); |
| usleep_range(10000, 15000); |
| |
| if (mode == NXP_NCI_MODE_COLD) |
| phy->hard_fault = 0; |
| |
| return 0; |
| } |
| |
| static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb) |
| { |
| int r; |
| struct nxp_nci_i2c_phy *phy = phy_id; |
| struct i2c_client *client = phy->i2c_dev; |
| |
| if (phy->hard_fault != 0) |
| return phy->hard_fault; |
| |
| r = i2c_master_send(client, skb->data, skb->len); |
| if (r == -EREMOTEIO) { |
| /* Retry, chip was in standby */ |
| usleep_range(110000, 120000); |
| r = i2c_master_send(client, skb->data, skb->len); |
| } |
| |
| if (r < 0) { |
| nfc_err(&client->dev, "Error %d on I2C send\n", r); |
| } else if (r != skb->len) { |
| nfc_err(&client->dev, |
| "Invalid length sent: %u (expected %u)\n", |
| r, skb->len); |
| r = -EREMOTEIO; |
| } else { |
| /* Success but return 0 and not number of bytes */ |
| r = 0; |
| } |
| |
| return r; |
| } |
| |
| static struct nxp_nci_phy_ops i2c_phy_ops = { |
| .set_mode = nxp_nci_i2c_set_mode, |
| .write = nxp_nci_i2c_write, |
| }; |
| |
| static int nxp_nci_i2c_fw_read(struct nxp_nci_i2c_phy *phy, |
| struct sk_buff **skb) |
| { |
| struct i2c_client *client = phy->i2c_dev; |
| u16 header; |
| size_t frame_len; |
| int r; |
| |
| r = i2c_master_recv(client, (u8 *) &header, NXP_NCI_FW_HDR_LEN); |
| if (r < 0) { |
| goto fw_read_exit; |
| } else if (r != NXP_NCI_FW_HDR_LEN) { |
| nfc_err(&client->dev, "Incorrect header length: %u\n", r); |
| r = -EBADMSG; |
| goto fw_read_exit; |
| } |
| |
| frame_len = (get_unaligned_be16(&header) & NXP_NCI_FW_FRAME_LEN_MASK) + |
| NXP_NCI_FW_CRC_LEN; |
| |
| *skb = alloc_skb(NXP_NCI_FW_HDR_LEN + frame_len, GFP_KERNEL); |
| if (*skb == NULL) { |
| r = -ENOMEM; |
| goto fw_read_exit; |
| } |
| |
| memcpy(skb_put(*skb, NXP_NCI_FW_HDR_LEN), &header, NXP_NCI_FW_HDR_LEN); |
| |
| r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len); |
| if (r != frame_len) { |
| nfc_err(&client->dev, |
| "Invalid frame length: %u (expected %zu)\n", |
| r, frame_len); |
| r = -EBADMSG; |
| goto fw_read_exit_free_skb; |
| } |
| |
| return 0; |
| |
| fw_read_exit_free_skb: |
| kfree_skb(*skb); |
| fw_read_exit: |
| return r; |
| } |
| |
| static int nxp_nci_i2c_nci_read(struct nxp_nci_i2c_phy *phy, |
| struct sk_buff **skb) |
| { |
| struct nci_ctrl_hdr header; /* May actually be a data header */ |
| struct i2c_client *client = phy->i2c_dev; |
| int r; |
| |
| r = i2c_master_recv(client, (u8 *) &header, NCI_CTRL_HDR_SIZE); |
| if (r < 0) { |
| goto nci_read_exit; |
| } else if (r != NCI_CTRL_HDR_SIZE) { |
| nfc_err(&client->dev, "Incorrect header length: %u\n", r); |
| r = -EBADMSG; |
| goto nci_read_exit; |
| } |
| |
| *skb = alloc_skb(NCI_CTRL_HDR_SIZE + header.plen, GFP_KERNEL); |
| if (*skb == NULL) { |
| r = -ENOMEM; |
| goto nci_read_exit; |
| } |
| |
| memcpy(skb_put(*skb, NCI_CTRL_HDR_SIZE), (void *) &header, |
| NCI_CTRL_HDR_SIZE); |
| |
| r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen); |
| if (r != header.plen) { |
| nfc_err(&client->dev, |
| "Invalid frame payload length: %u (expected %u)\n", |
| r, header.plen); |
| r = -EBADMSG; |
| goto nci_read_exit_free_skb; |
| } |
| |
| return 0; |
| |
| nci_read_exit_free_skb: |
| kfree_skb(*skb); |
| nci_read_exit: |
| return r; |
| } |
| |
| static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id) |
| { |
| struct nxp_nci_i2c_phy *phy = phy_id; |
| struct i2c_client *client; |
| struct nxp_nci_info *info; |
| |
| struct sk_buff *skb = NULL; |
| int r = 0; |
| |
| if (!phy || !phy->ndev) |
| goto exit_irq_none; |
| |
| client = phy->i2c_dev; |
| |
| if (!client || irq != client->irq) |
| goto exit_irq_none; |
| |
| info = nci_get_drvdata(phy->ndev); |
| |
| if (!info) |
| goto exit_irq_none; |
| |
| mutex_lock(&info->info_lock); |
| |
| if (phy->hard_fault != 0) |
| goto exit_irq_handled; |
| |
| switch (info->mode) { |
| case NXP_NCI_MODE_NCI: |
| r = nxp_nci_i2c_nci_read(phy, &skb); |
| break; |
| case NXP_NCI_MODE_FW: |
| r = nxp_nci_i2c_fw_read(phy, &skb); |
| break; |
| case NXP_NCI_MODE_COLD: |
| r = -EREMOTEIO; |
| break; |
| } |
| |
| if (r == -EREMOTEIO) { |
| phy->hard_fault = r; |
| skb = NULL; |
| } else if (r < 0) { |
| nfc_err(&client->dev, "Read failed with error %d\n", r); |
| goto exit_irq_handled; |
| } |
| |
| switch (info->mode) { |
| case NXP_NCI_MODE_NCI: |
| nci_recv_frame(phy->ndev, skb); |
| break; |
| case NXP_NCI_MODE_FW: |
| nxp_nci_fw_recv_frame(phy->ndev, skb); |
| break; |
| case NXP_NCI_MODE_COLD: |
| break; |
| } |
| |
| exit_irq_handled: |
| mutex_unlock(&info->info_lock); |
| return IRQ_HANDLED; |
| exit_irq_none: |
| WARN_ON_ONCE(1); |
| return IRQ_NONE; |
| } |
| |
| #ifdef CONFIG_OF |
| |
| static int nxp_nci_i2c_parse_devtree(struct i2c_client *client) |
| { |
| struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client); |
| struct device_node *pp; |
| int r; |
| |
| pp = client->dev.of_node; |
| if (!pp) |
| return -ENODEV; |
| |
| r = of_get_named_gpio(pp, "enable-gpios", 0); |
| if (r == -EPROBE_DEFER) |
| r = of_get_named_gpio(pp, "enable-gpios", 0); |
| if (r < 0) { |
| nfc_err(&client->dev, "Failed to get EN gpio, error: %d\n", r); |
| return r; |
| } |
| phy->gpio_en = r; |
| |
| r = of_get_named_gpio(pp, "firmware-gpios", 0); |
| if (r == -EPROBE_DEFER) |
| r = of_get_named_gpio(pp, "firmware-gpios", 0); |
| if (r < 0) { |
| nfc_err(&client->dev, "Failed to get FW gpio, error: %d\n", r); |
| return r; |
| } |
| phy->gpio_fw = r; |
| |
| r = irq_of_parse_and_map(pp, 0); |
| if (r < 0) { |
| nfc_err(&client->dev, "Unable to get irq, error: %d\n", r); |
| return r; |
| } |
| client->irq = r; |
| |
| return 0; |
| } |
| |
| #else |
| |
| static int nxp_nci_i2c_parse_devtree(struct i2c_client *client) |
| { |
| return -ENODEV; |
| } |
| |
| #endif |
| |
| static int nxp_nci_i2c_acpi_config(struct nxp_nci_i2c_phy *phy) |
| { |
| struct i2c_client *client = phy->i2c_dev; |
| struct gpio_desc *gpiod_en, *gpiod_fw, *gpiod_irq; |
| |
| gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW); |
| gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW); |
| gpiod_irq = devm_gpiod_get_index(&client->dev, NULL, 0, GPIOD_IN); |
| |
| if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw) || IS_ERR(gpiod_irq)) { |
| nfc_err(&client->dev, "No GPIOs\n"); |
| return -EINVAL; |
| } |
| |
| client->irq = gpiod_to_irq(gpiod_irq); |
| if (client->irq < 0) { |
| nfc_err(&client->dev, "No IRQ\n"); |
| return -EINVAL; |
| } |
| |
| phy->gpio_en = desc_to_gpio(gpiod_en); |
| phy->gpio_fw = desc_to_gpio(gpiod_fw); |
| phy->gpio_irq = desc_to_gpio(gpiod_irq); |
| |
| return 0; |
| } |
| |
| static int nxp_nci_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct nxp_nci_i2c_phy *phy; |
| struct nxp_nci_nfc_platform_data *pdata; |
| int r; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); |
| r = -ENODEV; |
| goto probe_exit; |
| } |
| |
| phy = devm_kzalloc(&client->dev, sizeof(struct nxp_nci_i2c_phy), |
| GFP_KERNEL); |
| if (!phy) { |
| r = -ENOMEM; |
| goto probe_exit; |
| } |
| |
| phy->i2c_dev = client; |
| i2c_set_clientdata(client, phy); |
| |
| pdata = client->dev.platform_data; |
| |
| if (!pdata && client->dev.of_node) { |
| r = nxp_nci_i2c_parse_devtree(client); |
| if (r < 0) { |
| nfc_err(&client->dev, "Failed to get DT data\n"); |
| goto probe_exit; |
| } |
| } else if (pdata) { |
| phy->gpio_en = pdata->gpio_en; |
| phy->gpio_fw = pdata->gpio_fw; |
| client->irq = pdata->irq; |
| } else if (ACPI_HANDLE(&client->dev)) { |
| r = nxp_nci_i2c_acpi_config(phy); |
| if (r < 0) |
| goto probe_exit; |
| goto nci_probe; |
| } else { |
| nfc_err(&client->dev, "No platform data\n"); |
| r = -EINVAL; |
| goto probe_exit; |
| } |
| |
| r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en, |
| GPIOF_OUT_INIT_LOW, "nxp_nci_en"); |
| if (r < 0) |
| goto probe_exit; |
| |
| r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw, |
| GPIOF_OUT_INIT_LOW, "nxp_nci_fw"); |
| if (r < 0) |
| goto probe_exit; |
| |
| nci_probe: |
| r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops, |
| NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev); |
| if (r < 0) |
| goto probe_exit; |
| |
| r = request_threaded_irq(client->irq, NULL, |
| nxp_nci_i2c_irq_thread_fn, |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| NXP_NCI_I2C_DRIVER_NAME, phy); |
| if (r < 0) |
| nfc_err(&client->dev, "Unable to register IRQ handler\n"); |
| |
| probe_exit: |
| return r; |
| } |
| |
| static int nxp_nci_i2c_remove(struct i2c_client *client) |
| { |
| struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client); |
| |
| nxp_nci_remove(phy->ndev); |
| free_irq(client->irq, phy); |
| |
| return 0; |
| } |
| |
| static struct i2c_device_id nxp_nci_i2c_id_table[] = { |
| {"nxp-nci_i2c", 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, nxp_nci_i2c_id_table); |
| |
| static const struct of_device_id of_nxp_nci_i2c_match[] = { |
| { .compatible = "nxp,nxp-nci-i2c", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match); |
| |
| #ifdef CONFIG_ACPI |
| static struct acpi_device_id acpi_id[] = { |
| { "NXP7471" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, acpi_id); |
| #endif |
| |
| static struct i2c_driver nxp_nci_i2c_driver = { |
| .driver = { |
| .name = NXP_NCI_I2C_DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .acpi_match_table = ACPI_PTR(acpi_id), |
| .of_match_table = of_match_ptr(of_nxp_nci_i2c_match), |
| }, |
| .probe = nxp_nci_i2c_probe, |
| .id_table = nxp_nci_i2c_id_table, |
| .remove = nxp_nci_i2c_remove, |
| }; |
| |
| module_i2c_driver(nxp_nci_i2c_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("I2C driver for NXP NCI NFC controllers"); |
| MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>"); |
| MODULE_AUTHOR("Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>"); |