[media] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874/174/84
The em25xx/em276x/7x/8x provides 4 GPIO register sets,
each of them consisting of separate read and a write registers.
The same registers are also used by the em2874/174/84.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index e4b0669..c0b8535 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -285,14 +285,14 @@
/* Reset for the most [digital] boards */
static struct em28xx_reg_seq leadership_digital[] = {
- {EM2874_R80_GPIO, 0x70, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq leadership_reset[] = {
- {EM2874_R80_GPIO, 0xf0, 0xff, 10},
- {EM2874_R80_GPIO, 0xb0, 0xff, 10},
- {EM2874_R80_GPIO, 0xf0, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
{ -1, -1, -1, -1},
};
@@ -301,25 +301,25 @@
* GPIO_7 - LED
*/
static struct em28xx_reg_seq pctv_290e[] = {
- {EM2874_R80_GPIO, 0x00, 0xff, 80},
- {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
- {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
+ {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
{-1, -1, -1, -1},
};
#if 0
static struct em28xx_reg_seq terratec_h5_gpio[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
- {EM2874_R80_GPIO, 0xf6, 0xff, 100},
- {EM2874_R80_GPIO, 0xf2, 0xff, 50},
- {EM2874_R80_GPIO, 0xf6, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_h5_digital[] = {
- {EM2874_R80_GPIO, 0xf6, 0xff, 10},
- {EM2874_R80_GPIO, 0xe6, 0xff, 100},
- {EM2874_R80_GPIO, 0xa6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
{ -1, -1, -1, -1},
};
#endif
@@ -335,39 +335,39 @@
* GPIO_7 - LED (green LED)
*/
static struct em28xx_reg_seq pctv_460e[] = {
- {EM2874_R80_GPIO, 0x01, 0xff, 50},
+ {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
{0x0d, 0xff, 0xff, 50},
- {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
{0x0d, 0x42, 0xff, 50},
- {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
- {EM2874_R80_GPIO, 0xff, 0xff, 10},
- {EM2874_R80_GPIO, 0xfd, 0xff, 10}, /* xc5000 reset */
- {EM2874_R80_GPIO, 0xf9, 0xff, 35},
- {EM2874_R80_GPIO, 0xfd, 0xff, 10},
- {EM2874_R80_GPIO, 0xff, 0xff, 10},
- {EM2874_R80_GPIO, 0xfe, 0xff, 10},
- {EM2874_R80_GPIO, 0xbe, 0xff, 10},
- {EM2874_R80_GPIO, 0xfe, 0xff, 20},
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
+ {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20},
{ -1, -1, -1, -1},
};
#if 0
static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
- {EM2874_R80_GPIO, 0x6f, 0xff, 10},
- {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */
- {EM2874_R80_GPIO, 0x6f, 0xff, 10},
- {EM2874_R80_GPIO, 0x4f, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
+ {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq hauppauge_930c_digital[] = {
- {EM2874_R80_GPIO, 0xf6, 0xff, 10},
- {EM2874_R80_GPIO, 0xe6, 0xff, 100},
- {EM2874_R80_GPIO, 0xa6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
+ {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
{ -1, -1, -1, -1},
};
#endif
@@ -378,9 +378,9 @@
* GPIO_7 - LED, 0=active
*/
static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
- {EM2874_R80_GPIO, 0x83, 0xff, 100},
- {EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
- {EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
{-1, -1, -1, -1},
};
@@ -391,9 +391,9 @@
* GPIO_7: LED, 1=active
*/
static struct em28xx_reg_seq pctv_510e[] = {
- {EM2874_R80_GPIO, 0x10, 0xff, 100},
- {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
- {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
{ -1, -1, -1, -1},
};
@@ -404,10 +404,10 @@
* GPIO_7: LED, 1=active
*/
static struct em28xx_reg_seq pctv_520e[] = {
- {EM2874_R80_GPIO, 0x10, 0xff, 100},
- {EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
- {EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
- {EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
+ {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
{ -1, -1, -1, -1},
};
@@ -2947,13 +2947,13 @@
break;
case CHIP_ID_EM2874:
chip_name = "em2874";
- dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM28174:
chip_name = "em28174";
- dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
@@ -2963,7 +2963,7 @@
break;
case CHIP_ID_EM2884:
chip_name = "em2884";
- dev->reg_gpio_num = EM2874_R80_GPIO;
+ dev->reg_gpio_num = EM2874_R80_GPIO_P0_CTRL;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;