| /* |
| NxtWave Communications - NXT6000 demodulator driver |
| |
| Copyright (C) 2002-2003 Florian Schirmer <jolt@tuxbox.org> |
| Copyright (C) 2003 Paul Andreassen <paul@andreassen.com.au> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| |
| #include "dvb_frontend.h" |
| #include "nxt6000_priv.h" |
| #include "nxt6000.h" |
| |
| |
| |
| struct nxt6000_state { |
| struct i2c_adapter* i2c; |
| struct dvb_frontend_ops ops; |
| /* configuration settings */ |
| const struct nxt6000_config* config; |
| struct dvb_frontend frontend; |
| }; |
| |
| static int debug = 0; |
| #define dprintk if (debug) printk |
| |
| static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data) |
| { |
| u8 buf[] = { reg, data }; |
| struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 2 }; |
| int ret; |
| |
| if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) |
| dprintk("nxt6000: nxt6000_write error (reg: 0x%02X, data: 0x%02X, ret: %d)\n", reg, data, ret); |
| |
| return (ret != 1) ? -EFAULT : 0; |
| } |
| |
| static u8 nxt6000_readreg(struct nxt6000_state* state, u8 reg) |
| { |
| int ret; |
| u8 b0[] = { reg }; |
| u8 b1[] = { 0 }; |
| struct i2c_msg msgs[] = { |
| {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = 1}, |
| {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1} |
| }; |
| |
| ret = i2c_transfer(state->i2c, msgs, 2); |
| |
| if (ret != 2) |
| dprintk("nxt6000: nxt6000_read error (reg: 0x%02X, ret: %d)\n", reg, ret); |
| |
| return b1[0]; |
| } |
| |
| static void nxt6000_reset(struct nxt6000_state* state) |
| { |
| u8 val; |
| |
| val = nxt6000_readreg(state, OFDM_COR_CTL); |
| |
| nxt6000_writereg(state, OFDM_COR_CTL, val & ~COREACT); |
| nxt6000_writereg(state, OFDM_COR_CTL, val | COREACT); |
| } |
| |
| static int nxt6000_set_bandwidth(struct nxt6000_state* state, fe_bandwidth_t bandwidth) |
| { |
| u16 nominal_rate; |
| int result; |
| |
| switch (bandwidth) { |
| |
| case BANDWIDTH_6_MHZ: |
| nominal_rate = 0x55B7; |
| break; |
| |
| case BANDWIDTH_7_MHZ: |
| nominal_rate = 0x6400; |
| break; |
| |
| case BANDWIDTH_8_MHZ: |
| nominal_rate = 0x7249; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| if ((result = nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_1, nominal_rate & 0xFF)) < 0) |
| return result; |
| |
| return nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_2, (nominal_rate >> 8) & 0xFF); |
| } |
| |
| static int nxt6000_set_guard_interval(struct nxt6000_state* state, fe_guard_interval_t guard_interval) |
| { |
| switch (guard_interval) { |
| |
| case GUARD_INTERVAL_1_32: |
| return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x00 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03)); |
| |
| case GUARD_INTERVAL_1_16: |
| return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x01 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03)); |
| |
| case GUARD_INTERVAL_AUTO: |
| case GUARD_INTERVAL_1_8: |
| return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x02 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03)); |
| |
| case GUARD_INTERVAL_1_4: |
| return nxt6000_writereg(state, OFDM_COR_MODEGUARD, 0x03 | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x03)); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int nxt6000_set_inversion(struct nxt6000_state* state, fe_spectral_inversion_t inversion) |
| { |
| switch (inversion) { |
| |
| case INVERSION_OFF: |
| return nxt6000_writereg(state, OFDM_ITB_CTL, 0x00); |
| |
| case INVERSION_ON: |
| return nxt6000_writereg(state, OFDM_ITB_CTL, ITBINV); |
| |
| default: |
| return -EINVAL; |
| |
| } |
| } |
| |
| static int nxt6000_set_transmission_mode(struct nxt6000_state* state, fe_transmit_mode_t transmission_mode) |
| { |
| int result; |
| |
| switch (transmission_mode) { |
| |
| case TRANSMISSION_MODE_2K: |
| if ((result = nxt6000_writereg(state, EN_DMD_RACQ, 0x00 | (nxt6000_readreg(state, EN_DMD_RACQ) & ~0x03))) < 0) |
| return result; |
| |
| return nxt6000_writereg(state, OFDM_COR_MODEGUARD, (0x00 << 2) | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x04)); |
| |
| case TRANSMISSION_MODE_8K: |
| case TRANSMISSION_MODE_AUTO: |
| if ((result = nxt6000_writereg(state, EN_DMD_RACQ, 0x02 | (nxt6000_readreg(state, EN_DMD_RACQ) & ~0x03))) < 0) |
| return result; |
| |
| return nxt6000_writereg(state, OFDM_COR_MODEGUARD, (0x01 << 2) | (nxt6000_readreg(state, OFDM_COR_MODEGUARD) & ~0x04)); |
| |
| default: |
| return -EINVAL; |
| |
| } |
| } |
| |
| static void nxt6000_setup(struct dvb_frontend* fe) |
| { |
| struct nxt6000_state* state = fe->demodulator_priv; |
| |
| nxt6000_writereg(state, RS_COR_SYNC_PARAM, SYNC_PARAM); |
| nxt6000_writereg(state, BER_CTRL, /*(1 << 2) | */ (0x01 << 1) | 0x01); |
| nxt6000_writereg(state, VIT_BERTIME_2, 0x00); // BER Timer = 0x000200 * 256 = 131072 bits |
| nxt6000_writereg(state, VIT_BERTIME_1, 0x02); // |
| nxt6000_writereg(state, VIT_BERTIME_0, 0x00); // |
| nxt6000_writereg(state, VIT_COR_INTEN, 0x98); // Enable BER interrupts |
| nxt6000_writereg(state, VIT_COR_CTL, 0x82); // Enable BER measurement |
| nxt6000_writereg(state, VIT_COR_CTL, VIT_COR_RESYNC | 0x02 ); |
| nxt6000_writereg(state, OFDM_COR_CTL, (0x01 << 5) | (nxt6000_readreg(state, OFDM_COR_CTL) & 0x0F)); |
| nxt6000_writereg(state, OFDM_COR_MODEGUARD, FORCEMODE8K | 0x02); |
| nxt6000_writereg(state, OFDM_AGC_CTL, AGCLAST | INITIAL_AGC_BW); |
| nxt6000_writereg(state, OFDM_ITB_FREQ_1, 0x06); |
| nxt6000_writereg(state, OFDM_ITB_FREQ_2, 0x31); |
| nxt6000_writereg(state, OFDM_CAS_CTL, (0x01 << 7) | (0x02 << 3) | 0x04); |
| nxt6000_writereg(state, CAS_FREQ, 0xBB); /* CHECKME */ |
| nxt6000_writereg(state, OFDM_SYR_CTL, 1 << 2); |
| nxt6000_writereg(state, OFDM_PPM_CTL_1, PPM256); |
| nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_1, 0x49); |
| nxt6000_writereg(state, OFDM_TRL_NOMINALRATE_2, 0x72); |
| nxt6000_writereg(state, ANALOG_CONTROL_0, 1 << 5); |
| nxt6000_writereg(state, EN_DMD_RACQ, (1 << 7) | (3 << 4) | 2); |
| nxt6000_writereg(state, DIAG_CONFIG, TB_SET); |
| |
| if (state->config->clock_inversion) |
| nxt6000_writereg(state, SUB_DIAG_MODE_SEL, CLKINVERSION); |
| else |
| nxt6000_writereg(state, SUB_DIAG_MODE_SEL, 0); |
| |
| nxt6000_writereg(state, TS_FORMAT, 0); |
| |
| if (state->config->pll_init) { |
| nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x01); /* open i2c bus switch */ |
| state->config->pll_init(fe); |
| nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x00); /* close i2c bus switch */ |
| } |
| } |
| |
| static void nxt6000_dump_status(struct nxt6000_state *state) |
| { |
| u8 val; |
| |
| /* |
| printk("RS_COR_STAT: 0x%02X\n", nxt6000_readreg(fe, RS_COR_STAT)); |
| printk("VIT_SYNC_STATUS: 0x%02X\n", nxt6000_readreg(fe, VIT_SYNC_STATUS)); |
| printk("OFDM_COR_STAT: 0x%02X\n", nxt6000_readreg(fe, OFDM_COR_STAT)); |
| printk("OFDM_SYR_STAT: 0x%02X\n", nxt6000_readreg(fe, OFDM_SYR_STAT)); |
| printk("OFDM_TPS_RCVD_1: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_1)); |
| printk("OFDM_TPS_RCVD_2: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_2)); |
| printk("OFDM_TPS_RCVD_3: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_3)); |
| printk("OFDM_TPS_RCVD_4: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RCVD_4)); |
| printk("OFDM_TPS_RESERVED_1: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RESERVED_1)); |
| printk("OFDM_TPS_RESERVED_2: 0x%02X\n", nxt6000_readreg(fe, OFDM_TPS_RESERVED_2)); |
| */ |
| printk("NXT6000 status:"); |
| |
| val = nxt6000_readreg(state, RS_COR_STAT); |
| |
| printk(" DATA DESCR LOCK: %d,", val & 0x01); |
| printk(" DATA SYNC LOCK: %d,", (val >> 1) & 0x01); |
| |
| val = nxt6000_readreg(state, VIT_SYNC_STATUS); |
| |
| printk(" VITERBI LOCK: %d,", (val >> 7) & 0x01); |
| |
| switch ((val >> 4) & 0x07) { |
| |
| case 0x00: |
| printk(" VITERBI CODERATE: 1/2,"); |
| break; |
| |
| case 0x01: |
| printk(" VITERBI CODERATE: 2/3,"); |
| break; |
| |
| case 0x02: |
| printk(" VITERBI CODERATE: 3/4,"); |
| break; |
| |
| case 0x03: |
| printk(" VITERBI CODERATE: 5/6,"); |
| break; |
| |
| case 0x04: |
| printk(" VITERBI CODERATE: 7/8,"); |
| break; |
| |
| default: |
| printk(" VITERBI CODERATE: Reserved,"); |
| |
| } |
| |
| val = nxt6000_readreg(state, OFDM_COR_STAT); |
| |
| printk(" CHCTrack: %d,", (val >> 7) & 0x01); |
| printk(" TPSLock: %d,", (val >> 6) & 0x01); |
| printk(" SYRLock: %d,", (val >> 5) & 0x01); |
| printk(" AGCLock: %d,", (val >> 4) & 0x01); |
| |
| switch (val & 0x0F) { |
| |
| case 0x00: |
| printk(" CoreState: IDLE,"); |
| break; |
| |
| case 0x02: |
| printk(" CoreState: WAIT_AGC,"); |
| break; |
| |
| case 0x03: |
| printk(" CoreState: WAIT_SYR,"); |
| break; |
| |
| case 0x04: |
| printk(" CoreState: WAIT_PPM,"); |
| break; |
| |
| case 0x01: |
| printk(" CoreState: WAIT_TRL,"); |
| break; |
| |
| case 0x05: |
| printk(" CoreState: WAIT_TPS,"); |
| break; |
| |
| case 0x06: |
| printk(" CoreState: MONITOR_TPS,"); |
| break; |
| |
| default: |
| printk(" CoreState: Reserved,"); |
| |
| } |
| |
| val = nxt6000_readreg(state, OFDM_SYR_STAT); |
| |
| printk(" SYRLock: %d,", (val >> 4) & 0x01); |
| printk(" SYRMode: %s,", (val >> 2) & 0x01 ? "8K" : "2K"); |
| |
| switch ((val >> 4) & 0x03) { |
| |
| case 0x00: |
| printk(" SYRGuard: 1/32,"); |
| break; |
| |
| case 0x01: |
| printk(" SYRGuard: 1/16,"); |
| break; |
| |
| case 0x02: |
| printk(" SYRGuard: 1/8,"); |
| break; |
| |
| case 0x03: |
| printk(" SYRGuard: 1/4,"); |
| break; |
| } |
| |
| val = nxt6000_readreg(state, OFDM_TPS_RCVD_3); |
| |
| switch ((val >> 4) & 0x07) { |
| |
| case 0x00: |
| printk(" TPSLP: 1/2,"); |
| break; |
| |
| case 0x01: |
| printk(" TPSLP: 2/3,"); |
| break; |
| |
| case 0x02: |
| printk(" TPSLP: 3/4,"); |
| break; |
| |
| case 0x03: |
| printk(" TPSLP: 5/6,"); |
| break; |
| |
| case 0x04: |
| printk(" TPSLP: 7/8,"); |
| break; |
| |
| default: |
| printk(" TPSLP: Reserved,"); |
| |
| } |
| |
| switch (val & 0x07) { |
| |
| case 0x00: |
| printk(" TPSHP: 1/2,"); |
| break; |
| |
| case 0x01: |
| printk(" TPSHP: 2/3,"); |
| break; |
| |
| case 0x02: |
| printk(" TPSHP: 3/4,"); |
| break; |
| |
| case 0x03: |
| printk(" TPSHP: 5/6,"); |
| break; |
| |
| case 0x04: |
| printk(" TPSHP: 7/8,"); |
| break; |
| |
| default: |
| printk(" TPSHP: Reserved,"); |
| |
| } |
| |
| val = nxt6000_readreg(state, OFDM_TPS_RCVD_4); |
| |
| printk(" TPSMode: %s,", val & 0x01 ? "8K" : "2K"); |
| |
| switch ((val >> 4) & 0x03) { |
| |
| case 0x00: |
| printk(" TPSGuard: 1/32,"); |
| break; |
| |
| case 0x01: |
| printk(" TPSGuard: 1/16,"); |
| break; |
| |
| case 0x02: |
| printk(" TPSGuard: 1/8,"); |
| break; |
| |
| case 0x03: |
| printk(" TPSGuard: 1/4,"); |
| break; |
| |
| } |
| |
| /* Strange magic required to gain access to RF_AGC_STATUS */ |
| nxt6000_readreg(state, RF_AGC_VAL_1); |
| val = nxt6000_readreg(state, RF_AGC_STATUS); |
| val = nxt6000_readreg(state, RF_AGC_STATUS); |
| |
| printk(" RF AGC LOCK: %d,", (val >> 4) & 0x01); |
| printk("\n"); |
| } |
| |
| static int nxt6000_read_status(struct dvb_frontend* fe, fe_status_t* status) |
| { |
| u8 core_status; |
| struct nxt6000_state* state = fe->demodulator_priv; |
| |
| *status = 0; |
| |
| core_status = nxt6000_readreg(state, OFDM_COR_STAT); |
| |
| if (core_status & AGCLOCKED) |
| *status |= FE_HAS_SIGNAL; |
| |
| if (nxt6000_readreg(state, OFDM_SYR_STAT) & GI14_SYR_LOCK) |
| *status |= FE_HAS_CARRIER; |
| |
| if (nxt6000_readreg(state, VIT_SYNC_STATUS) & VITINSYNC) |
| *status |= FE_HAS_VITERBI; |
| |
| if (nxt6000_readreg(state, RS_COR_STAT) & RSCORESTATUS) |
| *status |= FE_HAS_SYNC; |
| |
| if ((core_status & TPSLOCKED) && (*status == (FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))) |
| *status |= FE_HAS_LOCK; |
| |
| if (debug) |
| nxt6000_dump_status(state); |
| |
| return 0; |
| } |
| |
| static int nxt6000_init(struct dvb_frontend* fe) |
| { |
| struct nxt6000_state* state = fe->demodulator_priv; |
| |
| nxt6000_reset(state); |
| nxt6000_setup(fe); |
| |
| return 0; |
| } |
| |
| static int nxt6000_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *param) |
| { |
| struct nxt6000_state* state = fe->demodulator_priv; |
| int result; |
| |
| nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x01); /* open i2c bus switch */ |
| state->config->pll_set(fe, param); |
| nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x00); /* close i2c bus switch */ |
| |
| if ((result = nxt6000_set_bandwidth(state, param->u.ofdm.bandwidth)) < 0) |
| return result; |
| if ((result = nxt6000_set_guard_interval(state, param->u.ofdm.guard_interval)) < 0) |
| return result; |
| if ((result = nxt6000_set_transmission_mode(state, param->u.ofdm.transmission_mode)) < 0) |
| return result; |
| if ((result = nxt6000_set_inversion(state, param->inversion)) < 0) |
| return result; |
| |
| msleep(500); |
| return 0; |
| } |
| |
| static void nxt6000_release(struct dvb_frontend* fe) |
| { |
| struct nxt6000_state* state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static int nxt6000_read_snr(struct dvb_frontend* fe, u16* snr) |
| { |
| struct nxt6000_state* state = fe->demodulator_priv; |
| |
| *snr = nxt6000_readreg( state, OFDM_CHC_SNR) / 8; |
| |
| return 0; |
| } |
| |
| static int nxt6000_read_ber(struct dvb_frontend* fe, u32* ber) |
| { |
| struct nxt6000_state* state = fe->demodulator_priv; |
| |
| nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18 ); |
| |
| *ber = (nxt6000_readreg( state, VIT_BER_1 ) << 8 ) | |
| nxt6000_readreg( state, VIT_BER_0 ); |
| |
| nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18); // Clear BER Done interrupts |
| |
| return 0; |
| } |
| |
| static int nxt6000_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) |
| { |
| struct nxt6000_state* state = fe->demodulator_priv; |
| |
| *signal_strength = (short) (511 - |
| (nxt6000_readreg(state, AGC_GAIN_1) + |
| ((nxt6000_readreg(state, AGC_GAIN_2) & 0x03) << 8))); |
| |
| return 0; |
| } |
| |
| static int nxt6000_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) |
| { |
| tune->min_delay_ms = 500; |
| return 0; |
| } |
| |
| static struct dvb_frontend_ops nxt6000_ops; |
| |
| struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, |
| struct i2c_adapter* i2c) |
| { |
| struct nxt6000_state* state = NULL; |
| |
| /* allocate memory for the internal state */ |
| state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL); |
| if (state == NULL) goto error; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| memcpy(&state->ops, &nxt6000_ops, sizeof(struct dvb_frontend_ops)); |
| |
| /* check if the demod is there */ |
| if (nxt6000_readreg(state, OFDM_MSC_REV) != NXT6000ASICDEVICE) goto error; |
| |
| /* create dvb_frontend */ |
| state->frontend.ops = &state->ops; |
| state->frontend.demodulator_priv = state; |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| |
| static struct dvb_frontend_ops nxt6000_ops = { |
| |
| .info = { |
| .name = "NxtWave NXT6000 DVB-T", |
| .type = FE_OFDM, |
| .frequency_min = 0, |
| .frequency_max = 863250000, |
| .frequency_stepsize = 62500, |
| /*.frequency_tolerance = *//* FIXME: 12% of SR */ |
| .symbol_rate_min = 0, /* FIXME */ |
| .symbol_rate_max = 9360000, /* FIXME */ |
| .symbol_rate_tolerance = 4000, |
| .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | |
| FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | |
| FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO, |
| }, |
| |
| .release = nxt6000_release, |
| |
| .init = nxt6000_init, |
| |
| .get_tune_settings = nxt6000_fe_get_tune_settings, |
| |
| .set_frontend = nxt6000_set_frontend, |
| |
| .read_status = nxt6000_read_status, |
| .read_ber = nxt6000_read_ber, |
| .read_signal_strength = nxt6000_read_signal_strength, |
| .read_snr = nxt6000_read_snr, |
| }; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| MODULE_DESCRIPTION("NxtWave NXT6000 DVB-T demodulator driver"); |
| MODULE_AUTHOR("Florian Schirmer"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(nxt6000_attach); |