| /* |
| * linux/drivers/video/vgacon.c -- Low level VGA based console driver |
| * |
| * Created 28 Sep 1997 by Geert Uytterhoeven |
| * |
| * Rewritten by Martin Mares <mj@ucw.cz>, July 1998 |
| * |
| * This file is based on the old console.c, vga.c and vesa_blank.c drivers. |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * 1995 Jay Estabrook |
| * |
| * User definable mapping table and font loading by Eugene G. Crosser, |
| * <crosser@average.org> |
| * |
| * Improved loadable font/UTF-8 support by H. Peter Anvin |
| * Feb-Sep 1995 <peter.anvin@linux.org> |
| * |
| * Colour palette handling, by Simon Tatham |
| * 17-Jun-95 <sgt20@cam.ac.uk> |
| * |
| * if 512 char mode is already enabled don't re-enable it, |
| * because it causes screen to flicker, by Mitja Horvat |
| * 5-May-96 <mitja.horvat@guest.arnes.si> |
| * |
| * Use 2 outw instead of 4 outb_p to reduce erroneous text |
| * flashing on RHS of screen during heavy console scrolling . |
| * Oct 1996, Paul Gortmaker. |
| * |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/fs.h> |
| #include <linux/kernel.h> |
| #include <linux/console.h> |
| #include <linux/string.h> |
| #include <linux/kd.h> |
| #include <linux/slab.h> |
| #include <linux/vt_kern.h> |
| #include <linux/selection.h> |
| #include <linux/spinlock.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/screen_info.h> |
| #include <linux/smp_lock.h> |
| #include <video/vga.h> |
| #include <asm/io.h> |
| |
| static DEFINE_SPINLOCK(vga_lock); |
| static int cursor_size_lastfrom; |
| static int cursor_size_lastto; |
| static u32 vgacon_xres; |
| static u32 vgacon_yres; |
| static struct vgastate state; |
| |
| #define BLANK 0x0020 |
| |
| #define CAN_LOAD_EGA_FONTS /* undefine if the user must not do this */ |
| #define CAN_LOAD_PALETTE /* undefine if the user must not do this */ |
| |
| /* You really do _NOT_ want to define this, unless you have buggy |
| * Trident VGA which will resize cursor when moving it between column |
| * 15 & 16. If you define this and your VGA is OK, inverse bug will |
| * appear. |
| */ |
| #undef TRIDENT_GLITCH |
| #define VGA_FONTWIDTH 8 /* VGA does not support fontwidths != 8 */ |
| /* |
| * Interface used by the world |
| */ |
| |
| static const char *vgacon_startup(void); |
| static void vgacon_init(struct vc_data *c, int init); |
| static void vgacon_deinit(struct vc_data *c); |
| static void vgacon_cursor(struct vc_data *c, int mode); |
| static int vgacon_switch(struct vc_data *c); |
| static int vgacon_blank(struct vc_data *c, int blank, int mode_switch); |
| static int vgacon_set_palette(struct vc_data *vc, unsigned char *table); |
| static int vgacon_scrolldelta(struct vc_data *c, int lines); |
| static int vgacon_set_origin(struct vc_data *c); |
| static void vgacon_save_screen(struct vc_data *c); |
| static int vgacon_scroll(struct vc_data *c, int t, int b, int dir, |
| int lines); |
| static void vgacon_invert_region(struct vc_data *c, u16 * p, int count); |
| static unsigned long vgacon_uni_pagedir[2]; |
| |
| /* Description of the hardware situation */ |
| static int vga_init_done __read_mostly; |
| static unsigned long vga_vram_base __read_mostly; /* Base of video memory */ |
| static unsigned long vga_vram_end __read_mostly; /* End of video memory */ |
| static unsigned int vga_vram_size __read_mostly; /* Size of video memory */ |
| static u16 vga_video_port_reg __read_mostly; /* Video register select port */ |
| static u16 vga_video_port_val __read_mostly; /* Video register value port */ |
| static unsigned int vga_video_num_columns; /* Number of text columns */ |
| static unsigned int vga_video_num_lines; /* Number of text lines */ |
| static int vga_can_do_color __read_mostly; /* Do we support colors? */ |
| static unsigned int vga_default_font_height __read_mostly; /* Height of default screen font */ |
| static unsigned char vga_video_type __read_mostly; /* Card type */ |
| static unsigned char vga_hardscroll_enabled __read_mostly; |
| static unsigned char vga_hardscroll_user_enable __read_mostly = 1; |
| static unsigned char vga_font_is_default = 1; |
| static int vga_vesa_blanked; |
| static int vga_palette_blanked; |
| static int vga_is_gfx; |
| static int vga_512_chars; |
| static int vga_video_font_height; |
| static int vga_scan_lines __read_mostly; |
| static unsigned int vga_rolled_over; |
| |
| static int __init no_scroll(char *str) |
| { |
| /* |
| * Disabling scrollback is required for the Braillex ib80-piezo |
| * Braille reader made by F.H. Papenmeier (Germany). |
| * Use the "no-scroll" bootflag. |
| */ |
| vga_hardscroll_user_enable = vga_hardscroll_enabled = 0; |
| return 1; |
| } |
| |
| __setup("no-scroll", no_scroll); |
| |
| /* |
| * By replacing the four outb_p with two back to back outw, we can reduce |
| * the window of opportunity to see text mislocated to the RHS of the |
| * console during heavy scrolling activity. However there is the remote |
| * possibility that some pre-dinosaur hardware won't like the back to back |
| * I/O. Since the Xservers get away with it, we should be able to as well. |
| */ |
| static inline void write_vga(unsigned char reg, unsigned int val) |
| { |
| unsigned int v1, v2; |
| unsigned long flags; |
| |
| /* |
| * ddprintk might set the console position from interrupt |
| * handlers, thus the write has to be IRQ-atomic. |
| */ |
| spin_lock_irqsave(&vga_lock, flags); |
| |
| #ifndef SLOW_VGA |
| v1 = reg + (val & 0xff00); |
| v2 = reg + 1 + ((val << 8) & 0xff00); |
| outw(v1, vga_video_port_reg); |
| outw(v2, vga_video_port_reg); |
| #else |
| outb_p(reg, vga_video_port_reg); |
| outb_p(val >> 8, vga_video_port_val); |
| outb_p(reg + 1, vga_video_port_reg); |
| outb_p(val & 0xff, vga_video_port_val); |
| #endif |
| spin_unlock_irqrestore(&vga_lock, flags); |
| } |
| |
| static inline void vga_set_mem_top(struct vc_data *c) |
| { |
| write_vga(12, (c->vc_visible_origin - vga_vram_base) / 2); |
| } |
| |
| #ifdef CONFIG_VGACON_SOFT_SCROLLBACK |
| #include <linux/bootmem.h> |
| /* software scrollback */ |
| static void *vgacon_scrollback; |
| static int vgacon_scrollback_tail; |
| static int vgacon_scrollback_size; |
| static int vgacon_scrollback_rows; |
| static int vgacon_scrollback_cnt; |
| static int vgacon_scrollback_cur; |
| static int vgacon_scrollback_save; |
| static int vgacon_scrollback_restore; |
| |
| static void vgacon_scrollback_init(int pitch) |
| { |
| int rows = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024/pitch; |
| |
| if (vgacon_scrollback) { |
| vgacon_scrollback_cnt = 0; |
| vgacon_scrollback_tail = 0; |
| vgacon_scrollback_cur = 0; |
| vgacon_scrollback_rows = rows - 1; |
| vgacon_scrollback_size = rows * pitch; |
| } |
| } |
| |
| /* |
| * Called only duing init so call of alloc_bootmen is ok. |
| * Marked __init_refok to silence modpost. |
| */ |
| static void __init_refok vgacon_scrollback_startup(void) |
| { |
| vgacon_scrollback = alloc_bootmem(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE |
| * 1024); |
| vgacon_scrollback_init(vga_video_num_columns * 2); |
| } |
| |
| static void vgacon_scrollback_update(struct vc_data *c, int t, int count) |
| { |
| void *p; |
| |
| if (!vgacon_scrollback_size || c->vc_num != fg_console) |
| return; |
| |
| p = (void *) (c->vc_origin + t * c->vc_size_row); |
| |
| while (count--) { |
| scr_memcpyw(vgacon_scrollback + vgacon_scrollback_tail, |
| p, c->vc_size_row); |
| vgacon_scrollback_cnt++; |
| p += c->vc_size_row; |
| vgacon_scrollback_tail += c->vc_size_row; |
| |
| if (vgacon_scrollback_tail >= vgacon_scrollback_size) |
| vgacon_scrollback_tail = 0; |
| |
| if (vgacon_scrollback_cnt > vgacon_scrollback_rows) |
| vgacon_scrollback_cnt = vgacon_scrollback_rows; |
| |
| vgacon_scrollback_cur = vgacon_scrollback_cnt; |
| } |
| } |
| |
| static void vgacon_restore_screen(struct vc_data *c) |
| { |
| vgacon_scrollback_save = 0; |
| |
| if (!vga_is_gfx && !vgacon_scrollback_restore) { |
| scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf, |
| c->vc_screenbuf_size > vga_vram_size ? |
| vga_vram_size : c->vc_screenbuf_size); |
| vgacon_scrollback_restore = 1; |
| vgacon_scrollback_cur = vgacon_scrollback_cnt; |
| } |
| } |
| |
| static int vgacon_scrolldelta(struct vc_data *c, int lines) |
| { |
| int start, end, count, soff, diff; |
| void *d, *s; |
| |
| if (!lines) { |
| c->vc_visible_origin = c->vc_origin; |
| vga_set_mem_top(c); |
| return 1; |
| } |
| |
| if (!vgacon_scrollback) |
| return 1; |
| |
| if (!vgacon_scrollback_save) { |
| vgacon_cursor(c, CM_ERASE); |
| vgacon_save_screen(c); |
| vgacon_scrollback_save = 1; |
| } |
| |
| vgacon_scrollback_restore = 0; |
| start = vgacon_scrollback_cur + lines; |
| end = start + abs(lines); |
| |
| if (start < 0) |
| start = 0; |
| |
| if (start > vgacon_scrollback_cnt) |
| start = vgacon_scrollback_cnt; |
| |
| if (end < 0) |
| end = 0; |
| |
| if (end > vgacon_scrollback_cnt) |
| end = vgacon_scrollback_cnt; |
| |
| vgacon_scrollback_cur = start; |
| count = end - start; |
| soff = vgacon_scrollback_tail - ((vgacon_scrollback_cnt - end) * |
| c->vc_size_row); |
| soff -= count * c->vc_size_row; |
| |
| if (soff < 0) |
| soff += vgacon_scrollback_size; |
| |
| count = vgacon_scrollback_cnt - start; |
| |
| if (count > c->vc_rows) |
| count = c->vc_rows; |
| |
| diff = c->vc_rows - count; |
| |
| d = (void *) c->vc_origin; |
| s = (void *) c->vc_screenbuf; |
| |
| while (count--) { |
| scr_memcpyw(d, vgacon_scrollback + soff, c->vc_size_row); |
| d += c->vc_size_row; |
| soff += c->vc_size_row; |
| |
| if (soff >= vgacon_scrollback_size) |
| soff = 0; |
| } |
| |
| if (diff == c->vc_rows) { |
| vgacon_cursor(c, CM_MOVE); |
| } else { |
| while (diff--) { |
| scr_memcpyw(d, s, c->vc_size_row); |
| d += c->vc_size_row; |
| s += c->vc_size_row; |
| } |
| } |
| |
| return 1; |
| } |
| #else |
| #define vgacon_scrollback_startup(...) do { } while (0) |
| #define vgacon_scrollback_init(...) do { } while (0) |
| #define vgacon_scrollback_update(...) do { } while (0) |
| |
| static void vgacon_restore_screen(struct vc_data *c) |
| { |
| if (c->vc_origin != c->vc_visible_origin) |
| vgacon_scrolldelta(c, 0); |
| } |
| |
| static int vgacon_scrolldelta(struct vc_data *c, int lines) |
| { |
| if (!lines) /* Turn scrollback off */ |
| c->vc_visible_origin = c->vc_origin; |
| else { |
| int margin = c->vc_size_row * 4; |
| int ul, we, p, st; |
| |
| if (vga_rolled_over > |
| (c->vc_scr_end - vga_vram_base) + margin) { |
| ul = c->vc_scr_end - vga_vram_base; |
| we = vga_rolled_over + c->vc_size_row; |
| } else { |
| ul = 0; |
| we = vga_vram_size; |
| } |
| p = (c->vc_visible_origin - vga_vram_base - ul + we) % we + |
| lines * c->vc_size_row; |
| st = (c->vc_origin - vga_vram_base - ul + we) % we; |
| if (st < 2 * margin) |
| margin = 0; |
| if (p < margin) |
| p = 0; |
| if (p > st - margin) |
| p = st; |
| c->vc_visible_origin = vga_vram_base + (p + ul) % we; |
| } |
| vga_set_mem_top(c); |
| return 1; |
| } |
| #endif /* CONFIG_VGACON_SOFT_SCROLLBACK */ |
| |
| static const char *vgacon_startup(void) |
| { |
| const char *display_desc = NULL; |
| u16 saved1, saved2; |
| volatile u16 *p; |
| |
| if (ORIG_VIDEO_ISVGA == VIDEO_TYPE_VLFB) { |
| no_vga: |
| #ifdef CONFIG_DUMMY_CONSOLE |
| conswitchp = &dummy_con; |
| return conswitchp->con_startup(); |
| #else |
| return NULL; |
| #endif |
| } |
| |
| /* SCREEN_INFO initialized? */ |
| if ((ORIG_VIDEO_MODE == 0) && |
| (ORIG_VIDEO_LINES == 0) && |
| (ORIG_VIDEO_COLS == 0)) |
| goto no_vga; |
| |
| /* VGA16 modes are not handled by VGACON */ |
| if ((ORIG_VIDEO_MODE == 0x0D) || /* 320x200/4 */ |
| (ORIG_VIDEO_MODE == 0x0E) || /* 640x200/4 */ |
| (ORIG_VIDEO_MODE == 0x10) || /* 640x350/4 */ |
| (ORIG_VIDEO_MODE == 0x12) || /* 640x480/4 */ |
| (ORIG_VIDEO_MODE == 0x6A)) /* 800x600/4, 0x6A is very common */ |
| goto no_vga; |
| |
| vga_video_num_lines = ORIG_VIDEO_LINES; |
| vga_video_num_columns = ORIG_VIDEO_COLS; |
| state.vgabase = NULL; |
| |
| if (ORIG_VIDEO_MODE == 7) { /* Is this a monochrome display? */ |
| vga_vram_base = 0xb0000; |
| vga_video_port_reg = VGA_CRT_IM; |
| vga_video_port_val = VGA_CRT_DM; |
| if ((ORIG_VIDEO_EGA_BX & 0xff) != 0x10) { |
| static struct resource ega_console_resource = |
| { .name = "ega", .start = 0x3B0, .end = 0x3BF }; |
| vga_video_type = VIDEO_TYPE_EGAM; |
| vga_vram_size = 0x8000; |
| display_desc = "EGA+"; |
| request_resource(&ioport_resource, |
| &ega_console_resource); |
| } else { |
| static struct resource mda1_console_resource = |
| { .name = "mda", .start = 0x3B0, .end = 0x3BB }; |
| static struct resource mda2_console_resource = |
| { .name = "mda", .start = 0x3BF, .end = 0x3BF }; |
| vga_video_type = VIDEO_TYPE_MDA; |
| vga_vram_size = 0x2000; |
| display_desc = "*MDA"; |
| request_resource(&ioport_resource, |
| &mda1_console_resource); |
| request_resource(&ioport_resource, |
| &mda2_console_resource); |
| vga_video_font_height = 14; |
| } |
| } else { |
| /* If not, it is color. */ |
| vga_can_do_color = 1; |
| vga_vram_base = 0xb8000; |
| vga_video_port_reg = VGA_CRT_IC; |
| vga_video_port_val = VGA_CRT_DC; |
| if ((ORIG_VIDEO_EGA_BX & 0xff) != 0x10) { |
| int i; |
| |
| vga_vram_size = 0x8000; |
| |
| if (!ORIG_VIDEO_ISVGA) { |
| static struct resource ega_console_resource |
| = { .name = "ega", .start = 0x3C0, .end = 0x3DF }; |
| vga_video_type = VIDEO_TYPE_EGAC; |
| display_desc = "EGA"; |
| request_resource(&ioport_resource, |
| &ega_console_resource); |
| } else { |
| static struct resource vga_console_resource |
| = { .name = "vga+", .start = 0x3C0, .end = 0x3DF }; |
| vga_video_type = VIDEO_TYPE_VGAC; |
| display_desc = "VGA+"; |
| request_resource(&ioport_resource, |
| &vga_console_resource); |
| |
| #ifdef VGA_CAN_DO_64KB |
| /* |
| * get 64K rather than 32K of video RAM. |
| * This doesn't actually work on all "VGA" |
| * controllers (it seems like setting MM=01 |
| * and COE=1 isn't necessarily a good idea) |
| */ |
| vga_vram_base = 0xa0000; |
| vga_vram_size = 0x10000; |
| outb_p(6, VGA_GFX_I); |
| outb_p(6, VGA_GFX_D); |
| #endif |
| /* |
| * Normalise the palette registers, to point |
| * the 16 screen colours to the first 16 |
| * DAC entries. |
| */ |
| |
| for (i = 0; i < 16; i++) { |
| inb_p(VGA_IS1_RC); |
| outb_p(i, VGA_ATT_W); |
| outb_p(i, VGA_ATT_W); |
| } |
| outb_p(0x20, VGA_ATT_W); |
| |
| /* |
| * Now set the DAC registers back to their |
| * default values |
| */ |
| for (i = 0; i < 16; i++) { |
| outb_p(color_table[i], VGA_PEL_IW); |
| outb_p(default_red[i], VGA_PEL_D); |
| outb_p(default_grn[i], VGA_PEL_D); |
| outb_p(default_blu[i], VGA_PEL_D); |
| } |
| } |
| } else { |
| static struct resource cga_console_resource = |
| { .name = "cga", .start = 0x3D4, .end = 0x3D5 }; |
| vga_video_type = VIDEO_TYPE_CGA; |
| vga_vram_size = 0x2000; |
| display_desc = "*CGA"; |
| request_resource(&ioport_resource, |
| &cga_console_resource); |
| vga_video_font_height = 8; |
| } |
| } |
| |
| vga_vram_base = VGA_MAP_MEM(vga_vram_base, vga_vram_size); |
| vga_vram_end = vga_vram_base + vga_vram_size; |
| |
| /* |
| * Find out if there is a graphics card present. |
| * Are there smarter methods around? |
| */ |
| p = (volatile u16 *) vga_vram_base; |
| saved1 = scr_readw(p); |
| saved2 = scr_readw(p + 1); |
| scr_writew(0xAA55, p); |
| scr_writew(0x55AA, p + 1); |
| if (scr_readw(p) != 0xAA55 || scr_readw(p + 1) != 0x55AA) { |
| scr_writew(saved1, p); |
| scr_writew(saved2, p + 1); |
| goto no_vga; |
| } |
| scr_writew(0x55AA, p); |
| scr_writew(0xAA55, p + 1); |
| if (scr_readw(p) != 0x55AA || scr_readw(p + 1) != 0xAA55) { |
| scr_writew(saved1, p); |
| scr_writew(saved2, p + 1); |
| goto no_vga; |
| } |
| scr_writew(saved1, p); |
| scr_writew(saved2, p + 1); |
| |
| if (vga_video_type == VIDEO_TYPE_EGAC |
| || vga_video_type == VIDEO_TYPE_VGAC |
| || vga_video_type == VIDEO_TYPE_EGAM) { |
| vga_hardscroll_enabled = vga_hardscroll_user_enable; |
| vga_default_font_height = ORIG_VIDEO_POINTS; |
| vga_video_font_height = ORIG_VIDEO_POINTS; |
| /* This may be suboptimal but is a safe bet - go with it */ |
| vga_scan_lines = |
| vga_video_font_height * vga_video_num_lines; |
| } |
| |
| vgacon_xres = ORIG_VIDEO_COLS * VGA_FONTWIDTH; |
| vgacon_yres = vga_scan_lines; |
| |
| if (!vga_init_done) { |
| vgacon_scrollback_startup(); |
| vga_init_done = 1; |
| } |
| |
| return display_desc; |
| } |
| |
| static void vgacon_init(struct vc_data *c, int init) |
| { |
| unsigned long p; |
| |
| /* |
| * We cannot be loaded as a module, therefore init is always 1, |
| * but vgacon_init can be called more than once, and init will |
| * not be 1. |
| */ |
| c->vc_can_do_color = vga_can_do_color; |
| |
| /* set dimensions manually if init != 0 since vc_resize() will fail */ |
| if (init) { |
| c->vc_cols = vga_video_num_columns; |
| c->vc_rows = vga_video_num_lines; |
| } else |
| vc_resize(c, vga_video_num_columns, vga_video_num_lines); |
| |
| c->vc_scan_lines = vga_scan_lines; |
| c->vc_font.height = vga_video_font_height; |
| c->vc_complement_mask = 0x7700; |
| if (vga_512_chars) |
| c->vc_hi_font_mask = 0x0800; |
| p = *c->vc_uni_pagedir_loc; |
| if (c->vc_uni_pagedir_loc == &c->vc_uni_pagedir || |
| !--c->vc_uni_pagedir_loc[1]) |
| con_free_unimap(c); |
| c->vc_uni_pagedir_loc = vgacon_uni_pagedir; |
| vgacon_uni_pagedir[1]++; |
| if (!vgacon_uni_pagedir[0] && p) |
| con_set_default_unimap(c); |
| } |
| |
| static void vgacon_deinit(struct vc_data *c) |
| { |
| /* When closing the last console, reset video origin */ |
| if (!--vgacon_uni_pagedir[1]) { |
| c->vc_visible_origin = vga_vram_base; |
| vga_set_mem_top(c); |
| con_free_unimap(c); |
| } |
| c->vc_uni_pagedir_loc = &c->vc_uni_pagedir; |
| con_set_default_unimap(c); |
| } |
| |
| static u8 vgacon_build_attr(struct vc_data *c, u8 color, u8 intensity, |
| u8 blink, u8 underline, u8 reverse, u8 italic) |
| { |
| u8 attr = color; |
| |
| if (vga_can_do_color) { |
| if (italic) |
| attr = (attr & 0xF0) | c->vc_itcolor; |
| else if (underline) |
| attr = (attr & 0xf0) | c->vc_ulcolor; |
| else if (intensity == 0) |
| attr = (attr & 0xf0) | c->vc_halfcolor; |
| } |
| if (reverse) |
| attr = |
| ((attr) & 0x88) | ((((attr) >> 4) | ((attr) << 4)) & |
| 0x77); |
| if (blink) |
| attr ^= 0x80; |
| if (intensity == 2) |
| attr ^= 0x08; |
| if (!vga_can_do_color) { |
| if (italic) |
| attr = (attr & 0xF8) | 0x02; |
| else if (underline) |
| attr = (attr & 0xf8) | 0x01; |
| else if (intensity == 0) |
| attr = (attr & 0xf0) | 0x08; |
| } |
| return attr; |
| } |
| |
| static void vgacon_invert_region(struct vc_data *c, u16 * p, int count) |
| { |
| int col = vga_can_do_color; |
| |
| while (count--) { |
| u16 a = scr_readw(p); |
| if (col) |
| a = ((a) & 0x88ff) | (((a) & 0x7000) >> 4) | |
| (((a) & 0x0700) << 4); |
| else |
| a ^= ((a & 0x0700) == 0x0100) ? 0x7000 : 0x7700; |
| scr_writew(a, p++); |
| } |
| } |
| |
| static void vgacon_set_cursor_size(int xpos, int from, int to) |
| { |
| unsigned long flags; |
| int curs, cure; |
| |
| #ifdef TRIDENT_GLITCH |
| if (xpos < 16) |
| from--, to--; |
| #endif |
| |
| if ((from == cursor_size_lastfrom) && (to == cursor_size_lastto)) |
| return; |
| cursor_size_lastfrom = from; |
| cursor_size_lastto = to; |
| |
| spin_lock_irqsave(&vga_lock, flags); |
| if (vga_video_type >= VIDEO_TYPE_VGAC) { |
| outb_p(VGA_CRTC_CURSOR_START, vga_video_port_reg); |
| curs = inb_p(vga_video_port_val); |
| outb_p(VGA_CRTC_CURSOR_END, vga_video_port_reg); |
| cure = inb_p(vga_video_port_val); |
| } else { |
| curs = 0; |
| cure = 0; |
| } |
| |
| curs = (curs & 0xc0) | from; |
| cure = (cure & 0xe0) | to; |
| |
| outb_p(VGA_CRTC_CURSOR_START, vga_video_port_reg); |
| outb_p(curs, vga_video_port_val); |
| outb_p(VGA_CRTC_CURSOR_END, vga_video_port_reg); |
| outb_p(cure, vga_video_port_val); |
| spin_unlock_irqrestore(&vga_lock, flags); |
| } |
| |
| static void vgacon_cursor(struct vc_data *c, int mode) |
| { |
| if (c->vc_mode != KD_TEXT) |
| return; |
| |
| vgacon_restore_screen(c); |
| |
| switch (mode) { |
| case CM_ERASE: |
| write_vga(14, (c->vc_pos - vga_vram_base) / 2); |
| if (vga_video_type >= VIDEO_TYPE_VGAC) |
| vgacon_set_cursor_size(c->vc_x, 31, 30); |
| else |
| vgacon_set_cursor_size(c->vc_x, 31, 31); |
| break; |
| |
| case CM_MOVE: |
| case CM_DRAW: |
| write_vga(14, (c->vc_pos - vga_vram_base) / 2); |
| switch (c->vc_cursor_type & 0x0f) { |
| case CUR_UNDERLINE: |
| vgacon_set_cursor_size(c->vc_x, |
| c->vc_font.height - |
| (c->vc_font.height < |
| 10 ? 2 : 3), |
| c->vc_font.height - |
| (c->vc_font.height < |
| 10 ? 1 : 2)); |
| break; |
| case CUR_TWO_THIRDS: |
| vgacon_set_cursor_size(c->vc_x, |
| c->vc_font.height / 3, |
| c->vc_font.height - |
| (c->vc_font.height < |
| 10 ? 1 : 2)); |
| break; |
| case CUR_LOWER_THIRD: |
| vgacon_set_cursor_size(c->vc_x, |
| (c->vc_font.height * 2) / 3, |
| c->vc_font.height - |
| (c->vc_font.height < |
| 10 ? 1 : 2)); |
| break; |
| case CUR_LOWER_HALF: |
| vgacon_set_cursor_size(c->vc_x, |
| c->vc_font.height / 2, |
| c->vc_font.height - |
| (c->vc_font.height < |
| 10 ? 1 : 2)); |
| break; |
| case CUR_NONE: |
| if (vga_video_type >= VIDEO_TYPE_VGAC) |
| vgacon_set_cursor_size(c->vc_x, 31, 30); |
| else |
| vgacon_set_cursor_size(c->vc_x, 31, 31); |
| break; |
| default: |
| vgacon_set_cursor_size(c->vc_x, 1, |
| c->vc_font.height); |
| break; |
| } |
| break; |
| } |
| } |
| |
| static int vgacon_doresize(struct vc_data *c, |
| unsigned int width, unsigned int height) |
| { |
| unsigned long flags; |
| unsigned int scanlines = height * c->vc_font.height; |
| u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan; |
| |
| spin_lock_irqsave(&vga_lock, flags); |
| |
| vgacon_xres = width * VGA_FONTWIDTH; |
| vgacon_yres = height * c->vc_font.height; |
| if (vga_video_type >= VIDEO_TYPE_VGAC) { |
| outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg); |
| max_scan = inb_p(vga_video_port_val); |
| |
| if (max_scan & 0x80) |
| scanlines <<= 1; |
| |
| outb_p(VGA_CRTC_MODE, vga_video_port_reg); |
| mode = inb_p(vga_video_port_val); |
| |
| if (mode & 0x04) |
| scanlines >>= 1; |
| |
| scanlines -= 1; |
| scanlines_lo = scanlines & 0xff; |
| |
| outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); |
| r7 = inb_p(vga_video_port_val) & ~0x42; |
| |
| if (scanlines & 0x100) |
| r7 |= 0x02; |
| if (scanlines & 0x200) |
| r7 |= 0x40; |
| |
| /* deprotect registers */ |
| outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); |
| vsync_end = inb_p(vga_video_port_val); |
| outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); |
| outb_p(vsync_end & ~0x80, vga_video_port_val); |
| } |
| |
| outb_p(VGA_CRTC_H_DISP, vga_video_port_reg); |
| outb_p(width - 1, vga_video_port_val); |
| outb_p(VGA_CRTC_OFFSET, vga_video_port_reg); |
| outb_p(width >> 1, vga_video_port_val); |
| |
| if (vga_video_type >= VIDEO_TYPE_VGAC) { |
| outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg); |
| outb_p(scanlines_lo, vga_video_port_val); |
| outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); |
| outb_p(r7,vga_video_port_val); |
| |
| /* reprotect registers */ |
| outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); |
| outb_p(vsync_end, vga_video_port_val); |
| } |
| |
| spin_unlock_irqrestore(&vga_lock, flags); |
| return 0; |
| } |
| |
| static int vgacon_switch(struct vc_data *c) |
| { |
| int x = c->vc_cols * VGA_FONTWIDTH; |
| int y = c->vc_rows * c->vc_font.height; |
| int rows = ORIG_VIDEO_LINES * vga_default_font_height/ |
| c->vc_font.height; |
| /* |
| * We need to save screen size here as it's the only way |
| * we can spot the screen has been resized and we need to |
| * set size of freshly allocated screens ourselves. |
| */ |
| vga_video_num_columns = c->vc_cols; |
| vga_video_num_lines = c->vc_rows; |
| |
| /* We can only copy out the size of the video buffer here, |
| * otherwise we get into VGA BIOS */ |
| |
| if (!vga_is_gfx) { |
| scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf, |
| c->vc_screenbuf_size > vga_vram_size ? |
| vga_vram_size : c->vc_screenbuf_size); |
| |
| if ((vgacon_xres != x || vgacon_yres != y) && |
| (!(vga_video_num_columns % 2) && |
| vga_video_num_columns <= ORIG_VIDEO_COLS && |
| vga_video_num_lines <= rows)) |
| vgacon_doresize(c, c->vc_cols, c->vc_rows); |
| } |
| |
| vgacon_scrollback_init(c->vc_size_row); |
| return 0; /* Redrawing not needed */ |
| } |
| |
| static void vga_set_palette(struct vc_data *vc, unsigned char *table) |
| { |
| int i, j; |
| |
| vga_w(state.vgabase, VGA_PEL_MSK, 0xff); |
| for (i = j = 0; i < 16; i++) { |
| vga_w(state.vgabase, VGA_PEL_IW, table[i]); |
| vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2); |
| vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2); |
| vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2); |
| } |
| } |
| |
| static int vgacon_set_palette(struct vc_data *vc, unsigned char *table) |
| { |
| #ifdef CAN_LOAD_PALETTE |
| if (vga_video_type != VIDEO_TYPE_VGAC || vga_palette_blanked |
| || !CON_IS_VISIBLE(vc)) |
| return -EINVAL; |
| vga_set_palette(vc, table); |
| return 0; |
| #else |
| return -EINVAL; |
| #endif |
| } |
| |
| /* structure holding original VGA register settings */ |
| static struct { |
| unsigned char SeqCtrlIndex; /* Sequencer Index reg. */ |
| unsigned char CrtCtrlIndex; /* CRT-Contr. Index reg. */ |
| unsigned char CrtMiscIO; /* Miscellaneous register */ |
| unsigned char HorizontalTotal; /* CRT-Controller:00h */ |
| unsigned char HorizDisplayEnd; /* CRT-Controller:01h */ |
| unsigned char StartHorizRetrace; /* CRT-Controller:04h */ |
| unsigned char EndHorizRetrace; /* CRT-Controller:05h */ |
| unsigned char Overflow; /* CRT-Controller:07h */ |
| unsigned char StartVertRetrace; /* CRT-Controller:10h */ |
| unsigned char EndVertRetrace; /* CRT-Controller:11h */ |
| unsigned char ModeControl; /* CRT-Controller:17h */ |
| unsigned char ClockingMode; /* Seq-Controller:01h */ |
| } vga_state; |
| |
| static void vga_vesa_blank(struct vgastate *state, int mode) |
| { |
| /* save original values of VGA controller registers */ |
| if (!vga_vesa_blanked) { |
| spin_lock_irq(&vga_lock); |
| vga_state.SeqCtrlIndex = vga_r(state->vgabase, VGA_SEQ_I); |
| vga_state.CrtCtrlIndex = inb_p(vga_video_port_reg); |
| vga_state.CrtMiscIO = vga_r(state->vgabase, VGA_MIS_R); |
| spin_unlock_irq(&vga_lock); |
| |
| outb_p(0x00, vga_video_port_reg); /* HorizontalTotal */ |
| vga_state.HorizontalTotal = inb_p(vga_video_port_val); |
| outb_p(0x01, vga_video_port_reg); /* HorizDisplayEnd */ |
| vga_state.HorizDisplayEnd = inb_p(vga_video_port_val); |
| outb_p(0x04, vga_video_port_reg); /* StartHorizRetrace */ |
| vga_state.StartHorizRetrace = inb_p(vga_video_port_val); |
| outb_p(0x05, vga_video_port_reg); /* EndHorizRetrace */ |
| vga_state.EndHorizRetrace = inb_p(vga_video_port_val); |
| outb_p(0x07, vga_video_port_reg); /* Overflow */ |
| vga_state.Overflow = inb_p(vga_video_port_val); |
| outb_p(0x10, vga_video_port_reg); /* StartVertRetrace */ |
| vga_state.StartVertRetrace = inb_p(vga_video_port_val); |
| outb_p(0x11, vga_video_port_reg); /* EndVertRetrace */ |
| vga_state.EndVertRetrace = inb_p(vga_video_port_val); |
| outb_p(0x17, vga_video_port_reg); /* ModeControl */ |
| vga_state.ModeControl = inb_p(vga_video_port_val); |
| vga_state.ClockingMode = vga_rseq(state->vgabase, VGA_SEQ_CLOCK_MODE); |
| } |
| |
| /* assure that video is enabled */ |
| /* "0x20" is VIDEO_ENABLE_bit in register 01 of sequencer */ |
| spin_lock_irq(&vga_lock); |
| vga_wseq(state->vgabase, VGA_SEQ_CLOCK_MODE, vga_state.ClockingMode | 0x20); |
| |
| /* test for vertical retrace in process.... */ |
| if ((vga_state.CrtMiscIO & 0x80) == 0x80) |
| vga_w(state->vgabase, VGA_MIS_W, vga_state.CrtMiscIO & 0xEF); |
| |
| /* |
| * Set <End of vertical retrace> to minimum (0) and |
| * <Start of vertical Retrace> to maximum (incl. overflow) |
| * Result: turn off vertical sync (VSync) pulse. |
| */ |
| if (mode & VESA_VSYNC_SUSPEND) { |
| outb_p(0x10, vga_video_port_reg); /* StartVertRetrace */ |
| outb_p(0xff, vga_video_port_val); /* maximum value */ |
| outb_p(0x11, vga_video_port_reg); /* EndVertRetrace */ |
| outb_p(0x40, vga_video_port_val); /* minimum (bits 0..3) */ |
| outb_p(0x07, vga_video_port_reg); /* Overflow */ |
| outb_p(vga_state.Overflow | 0x84, vga_video_port_val); /* bits 9,10 of vert. retrace */ |
| } |
| |
| if (mode & VESA_HSYNC_SUSPEND) { |
| /* |
| * Set <End of horizontal retrace> to minimum (0) and |
| * <Start of horizontal Retrace> to maximum |
| * Result: turn off horizontal sync (HSync) pulse. |
| */ |
| outb_p(0x04, vga_video_port_reg); /* StartHorizRetrace */ |
| outb_p(0xff, vga_video_port_val); /* maximum */ |
| outb_p(0x05, vga_video_port_reg); /* EndHorizRetrace */ |
| outb_p(0x00, vga_video_port_val); /* minimum (0) */ |
| } |
| |
| /* restore both index registers */ |
| vga_w(state->vgabase, VGA_SEQ_I, vga_state.SeqCtrlIndex); |
| outb_p(vga_state.CrtCtrlIndex, vga_video_port_reg); |
| spin_unlock_irq(&vga_lock); |
| } |
| |
| static void vga_vesa_unblank(struct vgastate *state) |
| { |
| /* restore original values of VGA controller registers */ |
| spin_lock_irq(&vga_lock); |
| vga_w(state->vgabase, VGA_MIS_W, vga_state.CrtMiscIO); |
| |
| outb_p(0x00, vga_video_port_reg); /* HorizontalTotal */ |
| outb_p(vga_state.HorizontalTotal, vga_video_port_val); |
| outb_p(0x01, vga_video_port_reg); /* HorizDisplayEnd */ |
| outb_p(vga_state.HorizDisplayEnd, vga_video_port_val); |
| outb_p(0x04, vga_video_port_reg); /* StartHorizRetrace */ |
| outb_p(vga_state.StartHorizRetrace, vga_video_port_val); |
| outb_p(0x05, vga_video_port_reg); /* EndHorizRetrace */ |
| outb_p(vga_state.EndHorizRetrace, vga_video_port_val); |
| outb_p(0x07, vga_video_port_reg); /* Overflow */ |
| outb_p(vga_state.Overflow, vga_video_port_val); |
| outb_p(0x10, vga_video_port_reg); /* StartVertRetrace */ |
| outb_p(vga_state.StartVertRetrace, vga_video_port_val); |
| outb_p(0x11, vga_video_port_reg); /* EndVertRetrace */ |
| outb_p(vga_state.EndVertRetrace, vga_video_port_val); |
| outb_p(0x17, vga_video_port_reg); /* ModeControl */ |
| outb_p(vga_state.ModeControl, vga_video_port_val); |
| /* ClockingMode */ |
| vga_wseq(state->vgabase, VGA_SEQ_CLOCK_MODE, vga_state.ClockingMode); |
| |
| /* restore index/control registers */ |
| vga_w(state->vgabase, VGA_SEQ_I, vga_state.SeqCtrlIndex); |
| outb_p(vga_state.CrtCtrlIndex, vga_video_port_reg); |
| spin_unlock_irq(&vga_lock); |
| } |
| |
| static void vga_pal_blank(struct vgastate *state) |
| { |
| int i; |
| |
| vga_w(state->vgabase, VGA_PEL_MSK, 0xff); |
| for (i = 0; i < 16; i++) { |
| vga_w(state->vgabase, VGA_PEL_IW, i); |
| vga_w(state->vgabase, VGA_PEL_D, 0); |
| vga_w(state->vgabase, VGA_PEL_D, 0); |
| vga_w(state->vgabase, VGA_PEL_D, 0); |
| } |
| } |
| |
| static int vgacon_blank(struct vc_data *c, int blank, int mode_switch) |
| { |
| switch (blank) { |
| case 0: /* Unblank */ |
| if (vga_vesa_blanked) { |
| vga_vesa_unblank(&state); |
| vga_vesa_blanked = 0; |
| } |
| if (vga_palette_blanked) { |
| vga_set_palette(c, color_table); |
| vga_palette_blanked = 0; |
| return 0; |
| } |
| vga_is_gfx = 0; |
| /* Tell console.c that it has to restore the screen itself */ |
| return 1; |
| case 1: /* Normal blanking */ |
| case -1: /* Obsolete */ |
| if (!mode_switch && vga_video_type == VIDEO_TYPE_VGAC) { |
| vga_pal_blank(&state); |
| vga_palette_blanked = 1; |
| return 0; |
| } |
| vgacon_set_origin(c); |
| scr_memsetw((void *) vga_vram_base, BLANK, |
| c->vc_screenbuf_size); |
| if (mode_switch) |
| vga_is_gfx = 1; |
| return 1; |
| default: /* VESA blanking */ |
| if (vga_video_type == VIDEO_TYPE_VGAC) { |
| vga_vesa_blank(&state, blank - 1); |
| vga_vesa_blanked = blank; |
| } |
| return 0; |
| } |
| } |
| |
| /* |
| * PIO_FONT support. |
| * |
| * The font loading code goes back to the codepage package by |
| * Joel Hoffman (joel@wam.umd.edu). (He reports that the original |
| * reference is: "From: p. 307 of _Programmer's Guide to PC & PS/2 |
| * Video Systems_ by Richard Wilton. 1987. Microsoft Press".) |
| * |
| * Change for certain monochrome monitors by Yury Shevchuck |
| * (sizif@botik.yaroslavl.su). |
| */ |
| |
| #ifdef CAN_LOAD_EGA_FONTS |
| |
| #define colourmap 0xa0000 |
| /* Pauline Middelink <middelin@polyware.iaf.nl> reports that we |
| should use 0xA0000 for the bwmap as well.. */ |
| #define blackwmap 0xa0000 |
| #define cmapsz 8192 |
| |
| static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512) |
| { |
| unsigned short video_port_status = vga_video_port_reg + 6; |
| int font_select = 0x00, beg, i; |
| char *charmap; |
| |
| if (vga_video_type != VIDEO_TYPE_EGAM) { |
| charmap = (char *) VGA_MAP_MEM(colourmap, 0); |
| beg = 0x0e; |
| #ifdef VGA_CAN_DO_64KB |
| if (vga_video_type == VIDEO_TYPE_VGAC) |
| beg = 0x06; |
| #endif |
| } else { |
| charmap = (char *) VGA_MAP_MEM(blackwmap, 0); |
| beg = 0x0a; |
| } |
| |
| #ifdef BROKEN_GRAPHICS_PROGRAMS |
| /* |
| * All fonts are loaded in slot 0 (0:1 for 512 ch) |
| */ |
| |
| if (!arg) |
| return -EINVAL; /* Return to default font not supported */ |
| |
| vga_font_is_default = 0; |
| font_select = ch512 ? 0x04 : 0x00; |
| #else |
| /* |
| * The default font is kept in slot 0 and is never touched. |
| * A custom font is loaded in slot 2 (256 ch) or 2:3 (512 ch) |
| */ |
| |
| if (set) { |
| vga_font_is_default = !arg; |
| if (!arg) |
| ch512 = 0; /* Default font is always 256 */ |
| font_select = arg ? (ch512 ? 0x0e : 0x0a) : 0x00; |
| } |
| |
| if (!vga_font_is_default) |
| charmap += 4 * cmapsz; |
| #endif |
| |
| unlock_kernel(); |
| spin_lock_irq(&vga_lock); |
| /* First, the Sequencer */ |
| vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1); |
| /* CPU writes only to map 2 */ |
| vga_wseq(state->vgabase, VGA_SEQ_PLANE_WRITE, 0x04); |
| /* Sequential addressing */ |
| vga_wseq(state->vgabase, VGA_SEQ_MEMORY_MODE, 0x07); |
| /* Clear synchronous reset */ |
| vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x03); |
| |
| /* Now, the graphics controller, select map 2 */ |
| vga_wgfx(state->vgabase, VGA_GFX_PLANE_READ, 0x02); |
| /* disable odd-even addressing */ |
| vga_wgfx(state->vgabase, VGA_GFX_MODE, 0x00); |
| /* map start at A000:0000 */ |
| vga_wgfx(state->vgabase, VGA_GFX_MISC, 0x00); |
| spin_unlock_irq(&vga_lock); |
| |
| if (arg) { |
| if (set) |
| for (i = 0; i < cmapsz; i++) |
| vga_writeb(arg[i], charmap + i); |
| else |
| for (i = 0; i < cmapsz; i++) |
| arg[i] = vga_readb(charmap + i); |
| |
| /* |
| * In 512-character mode, the character map is not contiguous if |
| * we want to remain EGA compatible -- which we do |
| */ |
| |
| if (ch512) { |
| charmap += 2 * cmapsz; |
| arg += cmapsz; |
| if (set) |
| for (i = 0; i < cmapsz; i++) |
| vga_writeb(arg[i], charmap + i); |
| else |
| for (i = 0; i < cmapsz; i++) |
| arg[i] = vga_readb(charmap + i); |
| } |
| } |
| |
| spin_lock_irq(&vga_lock); |
| /* First, the sequencer, Synchronous reset */ |
| vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x01); |
| /* CPU writes to maps 0 and 1 */ |
| vga_wseq(state->vgabase, VGA_SEQ_PLANE_WRITE, 0x03); |
| /* odd-even addressing */ |
| vga_wseq(state->vgabase, VGA_SEQ_MEMORY_MODE, 0x03); |
| /* Character Map Select */ |
| if (set) |
| vga_wseq(state->vgabase, VGA_SEQ_CHARACTER_MAP, font_select); |
| /* clear synchronous reset */ |
| vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x03); |
| |
| /* Now, the graphics controller, select map 0 for CPU */ |
| vga_wgfx(state->vgabase, VGA_GFX_PLANE_READ, 0x00); |
| /* enable even-odd addressing */ |
| vga_wgfx(state->vgabase, VGA_GFX_MODE, 0x10); |
| /* map starts at b800:0 or b000:0 */ |
| vga_wgfx(state->vgabase, VGA_GFX_MISC, beg); |
| |
| /* if 512 char mode is already enabled don't re-enable it. */ |
| if ((set) && (ch512 != vga_512_chars)) { |
| int i; |
| |
| /* attribute controller */ |
| for (i = 0; i < MAX_NR_CONSOLES; i++) { |
| struct vc_data *c = vc_cons[i].d; |
| if (c && c->vc_sw == &vga_con) |
| c->vc_hi_font_mask = ch512 ? 0x0800 : 0; |
| } |
| vga_512_chars = ch512; |
| /* 256-char: enable intensity bit |
| 512-char: disable intensity bit */ |
| inb_p(video_port_status); /* clear address flip-flop */ |
| /* color plane enable register */ |
| vga_wattr(state->vgabase, VGA_ATC_PLANE_ENABLE, ch512 ? 0x07 : 0x0f); |
| /* Wilton (1987) mentions the following; I don't know what |
| it means, but it works, and it appears necessary */ |
| inb_p(video_port_status); |
| vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0); |
| } |
| spin_unlock_irq(&vga_lock); |
| lock_kernel(); |
| return 0; |
| } |
| |
| /* |
| * Adjust the screen to fit a font of a certain height |
| */ |
| static int vgacon_adjust_height(struct vc_data *vc, unsigned fontheight) |
| { |
| unsigned char ovr, vde, fsr; |
| int rows, maxscan, i; |
| |
| rows = vc->vc_scan_lines / fontheight; /* Number of video rows we end up with */ |
| maxscan = rows * fontheight - 1; /* Scan lines to actually display-1 */ |
| |
| /* Reprogram the CRTC for the new font size |
| Note: the attempt to read the overflow register will fail |
| on an EGA, but using 0xff for the previous value appears to |
| be OK for EGA text modes in the range 257-512 scan lines, so I |
| guess we don't need to worry about it. |
| |
| The same applies for the spill bits in the font size and cursor |
| registers; they are write-only on EGA, but it appears that they |
| are all don't care bits on EGA, so I guess it doesn't matter. */ |
| |
| spin_lock_irq(&vga_lock); |
| outb_p(0x07, vga_video_port_reg); /* CRTC overflow register */ |
| ovr = inb_p(vga_video_port_val); |
| outb_p(0x09, vga_video_port_reg); /* Font size register */ |
| fsr = inb_p(vga_video_port_val); |
| spin_unlock_irq(&vga_lock); |
| |
| vde = maxscan & 0xff; /* Vertical display end reg */ |
| ovr = (ovr & 0xbd) + /* Overflow register */ |
| ((maxscan & 0x100) >> 7) + ((maxscan & 0x200) >> 3); |
| fsr = (fsr & 0xe0) + (fontheight - 1); /* Font size register */ |
| |
| spin_lock_irq(&vga_lock); |
| outb_p(0x07, vga_video_port_reg); /* CRTC overflow register */ |
| outb_p(ovr, vga_video_port_val); |
| outb_p(0x09, vga_video_port_reg); /* Font size */ |
| outb_p(fsr, vga_video_port_val); |
| outb_p(0x12, vga_video_port_reg); /* Vertical display limit */ |
| outb_p(vde, vga_video_port_val); |
| spin_unlock_irq(&vga_lock); |
| vga_video_font_height = fontheight; |
| |
| for (i = 0; i < MAX_NR_CONSOLES; i++) { |
| struct vc_data *c = vc_cons[i].d; |
| |
| if (c && c->vc_sw == &vga_con) { |
| if (CON_IS_VISIBLE(c)) { |
| /* void size to cause regs to be rewritten */ |
| cursor_size_lastfrom = 0; |
| cursor_size_lastto = 0; |
| c->vc_sw->con_cursor(c, CM_DRAW); |
| } |
| c->vc_font.height = fontheight; |
| vc_resize(c, 0, rows); /* Adjust console size */ |
| } |
| } |
| return 0; |
| } |
| |
| static int vgacon_font_set(struct vc_data *c, struct console_font *font, unsigned flags) |
| { |
| unsigned charcount = font->charcount; |
| int rc; |
| |
| if (vga_video_type < VIDEO_TYPE_EGAM) |
| return -EINVAL; |
| |
| if (font->width != VGA_FONTWIDTH || |
| (charcount != 256 && charcount != 512)) |
| return -EINVAL; |
| |
| rc = vgacon_do_font_op(&state, font->data, 1, charcount == 512); |
| if (rc) |
| return rc; |
| |
| if (!(flags & KD_FONT_FLAG_DONT_RECALC)) |
| rc = vgacon_adjust_height(c, font->height); |
| return rc; |
| } |
| |
| static int vgacon_font_get(struct vc_data *c, struct console_font *font) |
| { |
| if (vga_video_type < VIDEO_TYPE_EGAM) |
| return -EINVAL; |
| |
| font->width = VGA_FONTWIDTH; |
| font->height = c->vc_font.height; |
| font->charcount = vga_512_chars ? 512 : 256; |
| if (!font->data) |
| return 0; |
| return vgacon_do_font_op(&state, font->data, 0, 0); |
| } |
| |
| #else |
| |
| #define vgacon_font_set NULL |
| #define vgacon_font_get NULL |
| |
| #endif |
| |
| static int vgacon_resize(struct vc_data *c, unsigned int width, |
| unsigned int height, unsigned int user) |
| { |
| if (width % 2 || width > ORIG_VIDEO_COLS || |
| height > (ORIG_VIDEO_LINES * vga_default_font_height)/ |
| c->vc_font.height) |
| /* let svgatextmode tinker with video timings and |
| return success */ |
| return (user) ? 0 : -EINVAL; |
| |
| if (CON_IS_VISIBLE(c) && !vga_is_gfx) /* who knows */ |
| vgacon_doresize(c, width, height); |
| return 0; |
| } |
| |
| static int vgacon_set_origin(struct vc_data *c) |
| { |
| if (vga_is_gfx || /* We don't play origin tricks in graphic modes */ |
| (console_blanked && !vga_palette_blanked)) /* Nor we write to blanked screens */ |
| return 0; |
| c->vc_origin = c->vc_visible_origin = vga_vram_base; |
| vga_set_mem_top(c); |
| vga_rolled_over = 0; |
| return 1; |
| } |
| |
| static void vgacon_save_screen(struct vc_data *c) |
| { |
| static int vga_bootup_console = 0; |
| |
| if (!vga_bootup_console) { |
| /* This is a gross hack, but here is the only place we can |
| * set bootup console parameters without messing up generic |
| * console initialization routines. |
| */ |
| vga_bootup_console = 1; |
| c->vc_x = ORIG_X; |
| c->vc_y = ORIG_Y; |
| } |
| |
| /* We can't copy in more then the size of the video buffer, |
| * or we'll be copying in VGA BIOS */ |
| |
| if (!vga_is_gfx) |
| scr_memcpyw((u16 *) c->vc_screenbuf, (u16 *) c->vc_origin, |
| c->vc_screenbuf_size > vga_vram_size ? vga_vram_size : c->vc_screenbuf_size); |
| } |
| |
| static int vgacon_scroll(struct vc_data *c, int t, int b, int dir, |
| int lines) |
| { |
| unsigned long oldo; |
| unsigned int delta; |
| |
| if (t || b != c->vc_rows || vga_is_gfx || c->vc_mode != KD_TEXT) |
| return 0; |
| |
| if (!vga_hardscroll_enabled || lines >= c->vc_rows / 2) |
| return 0; |
| |
| vgacon_restore_screen(c); |
| oldo = c->vc_origin; |
| delta = lines * c->vc_size_row; |
| if (dir == SM_UP) { |
| vgacon_scrollback_update(c, t, lines); |
| if (c->vc_scr_end + delta >= vga_vram_end) { |
| scr_memcpyw((u16 *) vga_vram_base, |
| (u16 *) (oldo + delta), |
| c->vc_screenbuf_size - delta); |
| c->vc_origin = vga_vram_base; |
| vga_rolled_over = oldo - vga_vram_base; |
| } else |
| c->vc_origin += delta; |
| scr_memsetw((u16 *) (c->vc_origin + c->vc_screenbuf_size - |
| delta), c->vc_video_erase_char, |
| delta); |
| } else { |
| if (oldo - delta < vga_vram_base) { |
| scr_memmovew((u16 *) (vga_vram_end - |
| c->vc_screenbuf_size + |
| delta), (u16 *) oldo, |
| c->vc_screenbuf_size - delta); |
| c->vc_origin = vga_vram_end - c->vc_screenbuf_size; |
| vga_rolled_over = 0; |
| } else |
| c->vc_origin -= delta; |
| c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; |
| scr_memsetw((u16 *) (c->vc_origin), c->vc_video_erase_char, |
| delta); |
| } |
| c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; |
| c->vc_visible_origin = c->vc_origin; |
| vga_set_mem_top(c); |
| c->vc_pos = (c->vc_pos - oldo) + c->vc_origin; |
| return 1; |
| } |
| |
| |
| /* |
| * The console `switch' structure for the VGA based console |
| */ |
| |
| static int vgacon_dummy(struct vc_data *c) |
| { |
| return 0; |
| } |
| |
| #define DUMMY (void *) vgacon_dummy |
| |
| const struct consw vga_con = { |
| .owner = THIS_MODULE, |
| .con_startup = vgacon_startup, |
| .con_init = vgacon_init, |
| .con_deinit = vgacon_deinit, |
| .con_clear = DUMMY, |
| .con_putc = DUMMY, |
| .con_putcs = DUMMY, |
| .con_cursor = vgacon_cursor, |
| .con_scroll = vgacon_scroll, |
| .con_bmove = DUMMY, |
| .con_switch = vgacon_switch, |
| .con_blank = vgacon_blank, |
| .con_font_set = vgacon_font_set, |
| .con_font_get = vgacon_font_get, |
| .con_resize = vgacon_resize, |
| .con_set_palette = vgacon_set_palette, |
| .con_scrolldelta = vgacon_scrolldelta, |
| .con_set_origin = vgacon_set_origin, |
| .con_save_screen = vgacon_save_screen, |
| .con_build_attr = vgacon_build_attr, |
| .con_invert_region = vgacon_invert_region, |
| }; |
| |
| MODULE_LICENSE("GPL"); |