drivers/firmware/qcom_scm-64.c - kernel/msm-4.19 - Gitiles

 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/qcom_scm.h>
 #include <linux/arm-smccc.h>
 #include <linux/dma-mapping.h>

 #include "qcom_scm.h"

 #define QCOM_SCM_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))

 #define MAX_QCOM_SCM_ARGS 10
 #define MAX_QCOM_SCM_RETS 3

 enum qcom_scm_arg_types {
 	QCOM_SCM_VAL,
 	QCOM_SCM_RO,
 	QCOM_SCM_RW,
 	QCOM_SCM_BUFVAL,
 };

 #define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
 			   (((a) & 0x3) << 4) | \
 			   (((b) & 0x3) << 6) | \
 			   (((c) & 0x3) << 8) | \
 			   (((d) & 0x3) << 10) | \
 			   (((e) & 0x3) << 12) | \
 			   (((f) & 0x3) << 14) | \
 			   (((g) & 0x3) << 16) | \
 			   (((h) & 0x3) << 18) | \
 			   (((i) & 0x3) << 20) | \
 			   (((j) & 0x3) << 22) | \
 			   ((num) & 0xf))

 #define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)

 /**
  * struct qcom_scm_desc
  * @arginfo:	Metadata describing the arguments in args[]
  * @args:	The array of arguments for the secure syscall
  * @res:	The values returned by the secure syscall
  */
 struct qcom_scm_desc {
 	u32 arginfo;
 	u64 args[MAX_QCOM_SCM_ARGS];
 };

 static u64 qcom_smccc_convention = -1;
 static DEFINE_MUTEX(qcom_scm_lock);

 #define QCOM_SCM_EBUSY_WAIT_MS 30
 #define QCOM_SCM_EBUSY_MAX_RETRY 20

 #define N_EXT_QCOM_SCM_ARGS 7
 #define FIRST_EXT_ARG_IDX 3
 #define N_REGISTER_ARGS (MAX_QCOM_SCM_ARGS - N_EXT_QCOM_SCM_ARGS + 1)

 /**
  * qcom_scm_call() - Invoke a syscall in the secure world
  * @dev:	device
  * @svc_id:	service identifier
  * @cmd_id:	command identifier
  * @desc:	Descriptor structure containing arguments and return values
  *
  * Sends a command to the SCM and waits for the command to finish processing.
  * This should *only* be called in pre-emptible context.
 */
 static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
 			 const struct qcom_scm_desc *desc,
 			 struct arm_smccc_res *res)
 {
 	int arglen = desc->arginfo & 0xf;
 	int retry_count = 0, i;
 	u32 fn_id = QCOM_SCM_FNID(svc_id, cmd_id);
 	u64 cmd, x5 = desc->args[FIRST_EXT_ARG_IDX];
 	dma_addr_t args_phys = 0;
 	void *args_virt = NULL;
 	size_t alloc_len;

 	if (unlikely(arglen > N_REGISTER_ARGS)) {
 		alloc_len = N_EXT_QCOM_SCM_ARGS * sizeof(u64);
 		args_virt = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);

 		if (!args_virt)
 			return -ENOMEM;

 		if (qcom_smccc_convention == ARM_SMCCC_SMC_32) {
 			__le32 *args = args_virt;

 			for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
 				args[i] = cpu_to_le32(desc->args[i +
 						      FIRST_EXT_ARG_IDX]);
 		} else {
 			__le64 *args = args_virt;

 			for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
 				args[i] = cpu_to_le64(desc->args[i +
 						      FIRST_EXT_ARG_IDX]);
 		}

 		args_phys = dma_map_single(dev, args_virt, alloc_len,
 					   DMA_TO_DEVICE);

 		if (dma_mapping_error(dev, args_phys)) {
 			kfree(args_virt);
 			return -ENOMEM;
 		}

 		x5 = args_phys;
 	}

 	do {
 		mutex_lock(&qcom_scm_lock);

 		cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
 					 qcom_smccc_convention,
 					 ARM_SMCCC_OWNER_SIP, fn_id);

 		do {
 			arm_smccc_smc(cmd, desc->arginfo, desc->args[0],
 				      desc->args[1], desc->args[2], x5, 0, 0,
 				      res);
 		} while (res->a0 == QCOM_SCM_INTERRUPTED);

 		mutex_unlock(&qcom_scm_lock);

 		if (res->a0 == QCOM_SCM_V2_EBUSY) {
 			if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY)
 				break;
 			msleep(QCOM_SCM_EBUSY_WAIT_MS);
 		}
 	}  while (res->a0 == QCOM_SCM_V2_EBUSY);

 	if (args_virt) {
 		dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
 		kfree(args_virt);
 	}

 	if (res->a0 < 0)
 		return qcom_scm_remap_error(res->a0);

 	return 0;
 }

 /**
  * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
  * @entry: Entry point function for the cpus
  * @cpus: The cpumask of cpus that will use the entry point
  *
  * Set the cold boot address of the cpus. Any cpu outside the supported
  * range would be removed from the cpu present mask.
  */
 int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
 {
 	return -ENOTSUPP;
 }

 /**
  * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
  * @dev: Device pointer
  * @entry: Entry point function for the cpus
  * @cpus: The cpumask of cpus that will use the entry point
  *
  * Set the Linux entry point for the SCM to transfer control to when coming
  * out of a power down. CPU power down may be executed on cpuidle or hotplug.
  */
 int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
 				  const cpumask_t *cpus)
 {
 	return -ENOTSUPP;
 }

 /**
  * qcom_scm_cpu_power_down() - Power down the cpu
  * @flags - Flags to flush cache
  *
  * This is an end point to power down cpu. If there was a pending interrupt,
  * the control would return from this function, otherwise, the cpu jumps to the
  * warm boot entry point set for this cpu upon reset.
  */
 void __qcom_scm_cpu_power_down(u32 flags)
 {
 }

 int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
 {
 	int ret;
 	struct qcom_scm_desc desc = {0};
 	struct arm_smccc_res res;

 	desc.arginfo = QCOM_SCM_ARGS(1);
 	desc.args[0] = QCOM_SCM_FNID(svc_id, cmd_id) |
 			(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);

 	ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
 			    &desc, &res);

 	return ret ? : res.a1;
 }

 int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
 			u32 req_cnt, u32 *resp)
 {
 	int ret;
 	struct qcom_scm_desc desc = {0};
 	struct arm_smccc_res res;

 	if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
 		return -ERANGE;

 	desc.args[0] = req[0].addr;
 	desc.args[1] = req[0].val;
 	desc.args[2] = req[1].addr;
 	desc.args[3] = req[1].val;
 	desc.args[4] = req[2].addr;
 	desc.args[5] = req[2].val;
 	desc.args[6] = req[3].addr;
 	desc.args[7] = req[3].val;
 	desc.args[8] = req[4].addr;
 	desc.args[9] = req[4].val;
 	desc.arginfo = QCOM_SCM_ARGS(10);

 	ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc,
 			    &res);
 	*resp = res.a1;

 	return ret;
 }

 void __qcom_scm_init(void)
 {
 	u64 cmd;
 	struct arm_smccc_res res;
 	u32 function = QCOM_SCM_FNID(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);

 	/* First try a SMC64 call */
 	cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
 				 ARM_SMCCC_OWNER_SIP, function);

 	arm_smccc_smc(cmd, QCOM_SCM_ARGS(1), cmd & (~BIT(ARM_SMCCC_TYPE_SHIFT)),
 		      0, 0, 0, 0, 0, &res);

 	if (!res.a0 && res.a1)
 		qcom_smccc_convention = ARM_SMCCC_SMC_64;
 	else
 		qcom_smccc_convention = ARM_SMCCC_SMC_32;
 }

 bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
 {
 	int ret;
 	struct qcom_scm_desc desc = {0};
 	struct arm_smccc_res res;

 	desc.args[0] = peripheral;
 	desc.arginfo = QCOM_SCM_ARGS(1);

 	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
 				QCOM_SCM_PAS_IS_SUPPORTED_CMD,
 				&desc, &res);

 	return ret ? false : !!res.a1;
 }

 int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
 			      dma_addr_t metadata_phys)
 {
 	int ret;
 	struct qcom_scm_desc desc = {0};
 	struct arm_smccc_res res;

 	desc.args[0] = peripheral;
 	desc.args[1] = metadata_phys;
 	desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);

 	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
 				&desc, &res);

 	return ret ? : res.a1;
 }

 int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
 			      phys_addr_t addr, phys_addr_t size)
 {
 	int ret;
 	struct qcom_scm_desc desc = {0};
 	struct arm_smccc_res res;

 	desc.args[0] = peripheral;
 	desc.args[1] = addr;
 	desc.args[2] = size;
 	desc.arginfo = QCOM_SCM_ARGS(3);

 	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
 				&desc, &res);

 	return ret ? : res.a1;
 }

 int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
 {
 	int ret;
 	struct qcom_scm_desc desc = {0};
 	struct arm_smccc_res res;

 	desc.args[0] = peripheral;
 	desc.arginfo = QCOM_SCM_ARGS(1);

 	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
 				QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
 				&desc, &res);

 	return ret ? : res.a1;
 }

 int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
 {
 	int ret;
 	struct qcom_scm_desc desc = {0};
 	struct arm_smccc_res res;

 	desc.args[0] = peripheral;
 	desc.arginfo = QCOM_SCM_ARGS(1);

 	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
 			&desc, &res);

 	return ret ? : res.a1;
 }

 int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
 {
 	struct qcom_scm_desc desc = {0};
 	struct arm_smccc_res res;
 	int ret;

 	desc.args[0] = reset;
 	desc.args[1] = 0;
 	desc.arginfo = QCOM_SCM_ARGS(2);

 	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc,
 			    &res);

 	return ret ? : res.a1;
 }
	/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/io.h>
	#include <linux/errno.h>
	#include <linux/delay.h>
	#include <linux/mutex.h>
	#include <linux/slab.h>
	#include <linux/types.h>
	#include <linux/qcom_scm.h>
	#include <linux/arm-smccc.h>
	#include <linux/dma-mapping.h>

	#include "qcom_scm.h"

	#define QCOM_SCM_FNID(s, c) ((((s) & 0xFF) << 8) \| ((c) & 0xFF))

	#define MAX_QCOM_SCM_ARGS 10
	#define MAX_QCOM_SCM_RETS 3

	enum qcom_scm_arg_types {
	QCOM_SCM_VAL,
	QCOM_SCM_RO,
	QCOM_SCM_RW,
	QCOM_SCM_BUFVAL,
	};

	#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
	(((a) & 0x3) << 4) \| \
	(((b) & 0x3) << 6) \| \
	(((c) & 0x3) << 8) \| \
	(((d) & 0x3) << 10) \| \
	(((e) & 0x3) << 12) \| \
	(((f) & 0x3) << 14) \| \
	(((g) & 0x3) << 16) \| \
	(((h) & 0x3) << 18) \| \
	(((i) & 0x3) << 20) \| \
	(((j) & 0x3) << 22) \| \
	((num) & 0xf))

	#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)

	/**
	* struct qcom_scm_desc
	* @arginfo: Metadata describing the arguments in args[]
	* @args: The array of arguments for the secure syscall
	* @res: The values returned by the secure syscall
	*/
	struct qcom_scm_desc {
	u32 arginfo;
	u64 args[MAX_QCOM_SCM_ARGS];
	};

	static u64 qcom_smccc_convention = -1;
	static DEFINE_MUTEX(qcom_scm_lock);

	#define QCOM_SCM_EBUSY_WAIT_MS 30
	#define QCOM_SCM_EBUSY_MAX_RETRY 20

	#define N_EXT_QCOM_SCM_ARGS 7
	#define FIRST_EXT_ARG_IDX 3
	#define N_REGISTER_ARGS (MAX_QCOM_SCM_ARGS - N_EXT_QCOM_SCM_ARGS + 1)

	/**
	* qcom_scm_call() - Invoke a syscall in the secure world
	* @dev: device
	* @svc_id: service identifier
	* @cmd_id: command identifier
	* @desc: Descriptor structure containing arguments and return values
	*
	* Sends a command to the SCM and waits for the command to finish processing.
	* This should only be called in pre-emptible context.
	*/
	static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
	const struct qcom_scm_desc *desc,
	struct arm_smccc_res *res)
	{
	int arglen = desc->arginfo & 0xf;
	int retry_count = 0, i;
	u32 fn_id = QCOM_SCM_FNID(svc_id, cmd_id);
	u64 cmd, x5 = desc->args[FIRST_EXT_ARG_IDX];
	dma_addr_t args_phys = 0;
	void *args_virt = NULL;
	size_t alloc_len;

	if (unlikely(arglen > N_REGISTER_ARGS)) {
	alloc_len = N_EXT_QCOM_SCM_ARGS * sizeof(u64);
	args_virt = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);

	if (!args_virt)
	return -ENOMEM;

	if (qcom_smccc_convention == ARM_SMCCC_SMC_32) {
	__le32 *args = args_virt;

	for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
	args[i] = cpu_to_le32(desc->args[i +
	FIRST_EXT_ARG_IDX]);
	} else {
	__le64 *args = args_virt;

	for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
	args[i] = cpu_to_le64(desc->args[i +
	FIRST_EXT_ARG_IDX]);
	}

	args_phys = dma_map_single(dev, args_virt, alloc_len,
	DMA_TO_DEVICE);

	if (dma_mapping_error(dev, args_phys)) {
	kfree(args_virt);
	return -ENOMEM;
	}

	x5 = args_phys;
	}

	do {
	mutex_lock(&qcom_scm_lock);

	cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
	qcom_smccc_convention,
	ARM_SMCCC_OWNER_SIP, fn_id);

	do {
	arm_smccc_smc(cmd, desc->arginfo, desc->args[0],
	desc->args[1], desc->args[2], x5, 0, 0,
	res);
	} while (res->a0 == QCOM_SCM_INTERRUPTED);

	mutex_unlock(&qcom_scm_lock);

	if (res->a0 == QCOM_SCM_V2_EBUSY) {
	if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY)
	break;
	msleep(QCOM_SCM_EBUSY_WAIT_MS);
	}
	} while (res->a0 == QCOM_SCM_V2_EBUSY);

	if (args_virt) {
	dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
	kfree(args_virt);
	}

	if (res->a0 < 0)
	return qcom_scm_remap_error(res->a0);

	return 0;
	}

	/**
	* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
	* @entry: Entry point function for the cpus
	* @cpus: The cpumask of cpus that will use the entry point
	*
	* Set the cold boot address of the cpus. Any cpu outside the supported
	* range would be removed from the cpu present mask.
	*/
	int __qcom_scm_set_cold_boot_addr(void entry, const cpumask_t cpus)
	{
	return -ENOTSUPP;
	}

	/**
	* qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
	* @dev: Device pointer
	* @entry: Entry point function for the cpus
	* @cpus: The cpumask of cpus that will use the entry point
	*
	* Set the Linux entry point for the SCM to transfer control to when coming
	* out of a power down. CPU power down may be executed on cpuidle or hotplug.
	*/
	int __qcom_scm_set_warm_boot_addr(struct device dev, void entry,
	const cpumask_t *cpus)
	{
	return -ENOTSUPP;
	}

	/**
	* qcom_scm_cpu_power_down() - Power down the cpu
	* @flags - Flags to flush cache
	*
	* This is an end point to power down cpu. If there was a pending interrupt,
	* the control would return from this function, otherwise, the cpu jumps to the
	* warm boot entry point set for this cpu upon reset.
	*/
	void __qcom_scm_cpu_power_down(u32 flags)
	{
	}

	int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
	{
	int ret;
	struct qcom_scm_desc desc = {0};
	struct arm_smccc_res res;

	desc.arginfo = QCOM_SCM_ARGS(1);
	desc.args[0] = QCOM_SCM_FNID(svc_id, cmd_id) \|
	(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);

	ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
	&desc, &res);

	return ret ? : res.a1;
	}

	int __qcom_scm_hdcp_req(struct device dev, struct qcom_scm_hdcp_req req,
	u32 req_cnt, u32 *resp)
	{
	int ret;
	struct qcom_scm_desc desc = {0};
	struct arm_smccc_res res;

	if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
	return -ERANGE;

	desc.args[0] = req[0].addr;
	desc.args[1] = req[0].val;
	desc.args[2] = req[1].addr;
	desc.args[3] = req[1].val;
	desc.args[4] = req[2].addr;
	desc.args[5] = req[2].val;
	desc.args[6] = req[3].addr;
	desc.args[7] = req[3].val;
	desc.args[8] = req[4].addr;
	desc.args[9] = req[4].val;
	desc.arginfo = QCOM_SCM_ARGS(10);

	ret = qcom_scm_call(dev, QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc,
	&res);
	*resp = res.a1;

	return ret;
	}

	void __qcom_scm_init(void)
	{
	u64 cmd;
	struct arm_smccc_res res;
	u32 function = QCOM_SCM_FNID(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);

	/* First try a SMC64 call */
	cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
	ARM_SMCCC_OWNER_SIP, function);

	arm_smccc_smc(cmd, QCOM_SCM_ARGS(1), cmd & (~BIT(ARM_SMCCC_TYPE_SHIFT)),
	0, 0, 0, 0, 0, &res);

	if (!res.a0 && res.a1)
	qcom_smccc_convention = ARM_SMCCC_SMC_64;
	else
	qcom_smccc_convention = ARM_SMCCC_SMC_32;
	}

	bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
	{
	int ret;
	struct qcom_scm_desc desc = {0};
	struct arm_smccc_res res;

	desc.args[0] = peripheral;
	desc.arginfo = QCOM_SCM_ARGS(1);

	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
	QCOM_SCM_PAS_IS_SUPPORTED_CMD,
	&desc, &res);

	return ret ? false : !!res.a1;
	}

	int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
	dma_addr_t metadata_phys)
	{
	int ret;
	struct qcom_scm_desc desc = {0};
	struct arm_smccc_res res;

	desc.args[0] = peripheral;
	desc.args[1] = metadata_phys;
	desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);

	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_INIT_IMAGE_CMD,
	&desc, &res);

	return ret ? : res.a1;
	}

	int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
	phys_addr_t addr, phys_addr_t size)
	{
	int ret;
	struct qcom_scm_desc desc = {0};
	struct arm_smccc_res res;

	desc.args[0] = peripheral;
	desc.args[1] = addr;
	desc.args[2] = size;
	desc.arginfo = QCOM_SCM_ARGS(3);

	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MEM_SETUP_CMD,
	&desc, &res);

	return ret ? : res.a1;
	}

	int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
	{
	int ret;
	struct qcom_scm_desc desc = {0};
	struct arm_smccc_res res;

	desc.args[0] = peripheral;
	desc.arginfo = QCOM_SCM_ARGS(1);

	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL,
	QCOM_SCM_PAS_AUTH_AND_RESET_CMD,
	&desc, &res);

	return ret ? : res.a1;
	}

	int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
	{
	int ret;
	struct qcom_scm_desc desc = {0};
	struct arm_smccc_res res;

	desc.args[0] = peripheral;
	desc.arginfo = QCOM_SCM_ARGS(1);

	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_SHUTDOWN_CMD,
	&desc, &res);

	return ret ? : res.a1;
	}

	int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
	{
	struct qcom_scm_desc desc = {0};
	struct arm_smccc_res res;
	int ret;

	desc.args[0] = reset;
	desc.args[1] = 0;
	desc.arginfo = QCOM_SCM_ARGS(2);

	ret = qcom_scm_call(dev, QCOM_SCM_SVC_PIL, QCOM_SCM_PAS_MSS_RESET, &desc,
	&res);

	return ret ? : res.a1;
	}