| /* |
| * linux/arch/alpha/mm/fault.c |
| * |
| * Copyright (C) 1995 Linus Torvalds |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <asm/io.h> |
| |
| #define __EXTERN_INLINE inline |
| #include <asm/mmu_context.h> |
| #include <asm/tlbflush.h> |
| #undef __EXTERN_INLINE |
| |
| #include <linux/signal.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/ptrace.h> |
| #include <linux/mman.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| |
| #include <asm/uaccess.h> |
| |
| extern void die_if_kernel(char *,struct pt_regs *,long, unsigned long *); |
| |
| |
| /* |
| * Force a new ASN for a task. |
| */ |
| |
| #ifndef CONFIG_SMP |
| unsigned long last_asn = ASN_FIRST_VERSION; |
| #endif |
| |
| void |
| __load_new_mm_context(struct mm_struct *next_mm) |
| { |
| unsigned long mmc; |
| struct pcb_struct *pcb; |
| |
| mmc = __get_new_mm_context(next_mm, smp_processor_id()); |
| next_mm->context[smp_processor_id()] = mmc; |
| |
| pcb = ¤t_thread_info()->pcb; |
| pcb->asn = mmc & HARDWARE_ASN_MASK; |
| pcb->ptbr = ((unsigned long) next_mm->pgd - IDENT_ADDR) >> PAGE_SHIFT; |
| |
| __reload_thread(pcb); |
| } |
| |
| |
| /* |
| * This routine handles page faults. It determines the address, |
| * and the problem, and then passes it off to handle_mm_fault(). |
| * |
| * mmcsr: |
| * 0 = translation not valid |
| * 1 = access violation |
| * 2 = fault-on-read |
| * 3 = fault-on-execute |
| * 4 = fault-on-write |
| * |
| * cause: |
| * -1 = instruction fetch |
| * 0 = load |
| * 1 = store |
| * |
| * Registers $9 through $15 are saved in a block just prior to `regs' and |
| * are saved and restored around the call to allow exception code to |
| * modify them. |
| */ |
| |
| /* Macro for exception fixup code to access integer registers. */ |
| #define dpf_reg(r) \ |
| (((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 : \ |
| (r) <= 18 ? (r)+8 : (r)-10]) |
| |
| asmlinkage void |
| do_page_fault(unsigned long address, unsigned long mmcsr, |
| long cause, struct pt_regs *regs) |
| { |
| struct vm_area_struct * vma; |
| struct mm_struct *mm = current->mm; |
| const struct exception_table_entry *fixup; |
| int fault, si_code = SEGV_MAPERR; |
| siginfo_t info; |
| unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; |
| |
| /* As of EV6, a load into $31/$f31 is a prefetch, and never faults |
| (or is suppressed by the PALcode). Support that for older CPUs |
| by ignoring such an instruction. */ |
| if (cause == 0) { |
| unsigned int insn; |
| __get_user(insn, (unsigned int __user *)regs->pc); |
| if ((insn >> 21 & 0x1f) == 0x1f && |
| /* ldq ldl ldt lds ldg ldf ldwu ldbu */ |
| (1ul << (insn >> 26) & 0x30f00001400ul)) { |
| regs->pc += 4; |
| return; |
| } |
| } |
| |
| /* If we're in an interrupt context, or have no user context, |
| we must not take the fault. */ |
| if (!mm || in_atomic()) |
| goto no_context; |
| |
| #ifdef CONFIG_ALPHA_LARGE_VMALLOC |
| if (address >= TASK_SIZE) |
| goto vmalloc_fault; |
| #endif |
| if (user_mode(regs)) |
| flags |= FAULT_FLAG_USER; |
| retry: |
| down_read(&mm->mmap_sem); |
| vma = find_vma(mm, address); |
| if (!vma) |
| goto bad_area; |
| if (vma->vm_start <= address) |
| goto good_area; |
| if (!(vma->vm_flags & VM_GROWSDOWN)) |
| goto bad_area; |
| if (expand_stack(vma, address)) |
| goto bad_area; |
| |
| /* Ok, we have a good vm_area for this memory access, so |
| we can handle it. */ |
| good_area: |
| si_code = SEGV_ACCERR; |
| if (cause < 0) { |
| if (!(vma->vm_flags & VM_EXEC)) |
| goto bad_area; |
| } else if (!cause) { |
| /* Allow reads even for write-only mappings */ |
| if (!(vma->vm_flags & (VM_READ | VM_WRITE))) |
| goto bad_area; |
| } else { |
| if (!(vma->vm_flags & VM_WRITE)) |
| goto bad_area; |
| flags |= FAULT_FLAG_WRITE; |
| } |
| |
| /* If for any reason at all we couldn't handle the fault, |
| make sure we exit gracefully rather than endlessly redo |
| the fault. */ |
| fault = handle_mm_fault(mm, vma, address, flags); |
| |
| if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) |
| return; |
| |
| if (unlikely(fault & VM_FAULT_ERROR)) { |
| if (fault & VM_FAULT_OOM) |
| goto out_of_memory; |
| else if (fault & VM_FAULT_SIGSEGV) |
| goto bad_area; |
| else if (fault & VM_FAULT_SIGBUS) |
| goto do_sigbus; |
| BUG(); |
| } |
| |
| if (flags & FAULT_FLAG_ALLOW_RETRY) { |
| if (fault & VM_FAULT_MAJOR) |
| current->maj_flt++; |
| else |
| current->min_flt++; |
| if (fault & VM_FAULT_RETRY) { |
| flags &= ~FAULT_FLAG_ALLOW_RETRY; |
| |
| /* No need to up_read(&mm->mmap_sem) as we would |
| * have already released it in __lock_page_or_retry |
| * in mm/filemap.c. |
| */ |
| |
| goto retry; |
| } |
| } |
| |
| up_read(&mm->mmap_sem); |
| |
| return; |
| |
| /* Something tried to access memory that isn't in our memory map. |
| Fix it, but check if it's kernel or user first. */ |
| bad_area: |
| up_read(&mm->mmap_sem); |
| |
| if (user_mode(regs)) |
| goto do_sigsegv; |
| |
| no_context: |
| /* Are we prepared to handle this fault as an exception? */ |
| if ((fixup = search_exception_tables(regs->pc)) != 0) { |
| unsigned long newpc; |
| newpc = fixup_exception(dpf_reg, fixup, regs->pc); |
| regs->pc = newpc; |
| return; |
| } |
| |
| /* Oops. The kernel tried to access some bad page. We'll have to |
| terminate things with extreme prejudice. */ |
| printk(KERN_ALERT "Unable to handle kernel paging request at " |
| "virtual address %016lx\n", address); |
| die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16); |
| do_exit(SIGKILL); |
| |
| /* We ran out of memory, or some other thing happened to us that |
| made us unable to handle the page fault gracefully. */ |
| out_of_memory: |
| up_read(&mm->mmap_sem); |
| if (!user_mode(regs)) |
| goto no_context; |
| pagefault_out_of_memory(); |
| return; |
| |
| do_sigbus: |
| up_read(&mm->mmap_sem); |
| /* Send a sigbus, regardless of whether we were in kernel |
| or user mode. */ |
| info.si_signo = SIGBUS; |
| info.si_errno = 0; |
| info.si_code = BUS_ADRERR; |
| info.si_addr = (void __user *) address; |
| force_sig_info(SIGBUS, &info, current); |
| if (!user_mode(regs)) |
| goto no_context; |
| return; |
| |
| do_sigsegv: |
| info.si_signo = SIGSEGV; |
| info.si_errno = 0; |
| info.si_code = si_code; |
| info.si_addr = (void __user *) address; |
| force_sig_info(SIGSEGV, &info, current); |
| return; |
| |
| #ifdef CONFIG_ALPHA_LARGE_VMALLOC |
| vmalloc_fault: |
| if (user_mode(regs)) |
| goto do_sigsegv; |
| else { |
| /* Synchronize this task's top level page-table |
| with the "reference" page table from init. */ |
| long index = pgd_index(address); |
| pgd_t *pgd, *pgd_k; |
| |
| pgd = current->active_mm->pgd + index; |
| pgd_k = swapper_pg_dir + index; |
| if (!pgd_present(*pgd) && pgd_present(*pgd_k)) { |
| pgd_val(*pgd) = pgd_val(*pgd_k); |
| return; |
| } |
| goto no_context; |
| } |
| #endif |
| } |