| #include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h> |
| |
| /* RPMh regulators */ |
| &apps_rsc { |
| /* PM8150A S3 = VDD_MX supply */ |
| rpmh-regulator-mxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "mx.lvl"; |
| pm8150a_s3_mmcx_sup_level-parent-supply = |
| <&VDD_CX_MMCX_SUPPLY_LEVEL>; |
| |
| VDD_MX_LEVEL: S3C_LEVEL: |
| pm8150a_s3_level: regulator-pm8150a-s3-level { |
| regulator-name = "pm8150a_s3_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| VDD_MX_LEVEL_AO: S3C_LEVEL_AO: |
| pm8150a_s3_level_ao: regulator-pm8150a-s3-level-ao { |
| regulator-name = "pm8150a_s3_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| VDD_MX_MMCX_SUPPLY_LEVEL: regulator-pm8150a-s3-mmcx-sup-level { |
| regulator-name = "pm8150a_s3_mmcx_sup_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| /* PM8150 S3 + S2 + S1 = VDD_CX supply */ |
| rpmh-regulator-cxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "cx.lvl"; |
| pm8150_s3_level-parent-supply = <&VDD_MX_LEVEL>; |
| pm8150_s3_level_ao-parent-supply = <&VDD_MX_LEVEL_AO>; |
| proxy-supply = <&VDD_CX_MMCX_SUPPLY_LEVEL>; |
| |
| VDD_CX_LEVEL: S3A_LEVEL: |
| pm8150_s3_level: regulator-pm8150-s3-level { |
| regulator-name = "pm8150_s3_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| VDD_CX_LEVEL_AO: S3A_LEVEL_AO: |
| pm8150_s3_level_ao: regulator-pm8150-s3-level-ao { |
| regulator-name = "pm8150_s3_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| VDD_CX_MMCX_SUPPLY_LEVEL: regulator-pm8150-s3-mmcx-sup-level { |
| regulator-name = "pm8150_s3_mmcx_sup_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level = |
| <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-voltage |
| = <RPMH_REGULATOR_LEVEL_TURBO |
| RPMH_REGULATOR_LEVEL_MAX>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa4"; |
| S4A: pm8150_s4: regulator-pm8150-s4 { |
| regulator-name = "pm8150_s4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1920000>; |
| qcom,init-voltage = <1800000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa5"; |
| S5A: pm8150_s5: regulator-pm8150-s5 { |
| regulator-name = "pm8150_s5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1824000>; |
| regulator-max-microvolt = <2040000>; |
| qcom,init-voltage = <1824000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa6"; |
| S6A: pm8150_s6: regulator-pm8150-s6 { |
| regulator-name = "pm8150_s6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <1128000>; |
| qcom,init-voltage = <600000>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L2A: pm8150_l2: regulator-pm8150-l2 { |
| regulator-name = "pm8150_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3072000>; |
| regulator-max-microvolt = <3072000>; |
| qcom,init-voltage = <3072000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa3"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| L3A: pm8150_l3: regulator-pm8150-l3 { |
| regulator-name = "pm8150_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <928000>; |
| regulator-max-microvolt = <932000>; |
| qcom,init-voltage = <928000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* PM8150 L4 = VDD_SSC_MX supply */ |
| rpmh-regulator-lmxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "lmx.lvl"; |
| L4A_LEVEL: pm8150_l4_level: regulator-pm8150-l4-level { |
| regulator-name = "pm8150_l4_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = |
| <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt = |
| <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| proxy-supply = <&pm8150_l5>; |
| L5A: pm8150_l5: regulator-pm8150-l5 { |
| regulator-name = "pm8150_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <880000>; |
| qcom,init-voltage = <880000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_HPM>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <100000>; |
| }; |
| |
| L5A_AO: pm8150_l5_ao: regulator-pm8150-l5-ao { |
| regulator-name = "pm8150_l5_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <880000>; |
| qcom,init-voltage = <880000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| regulator-pm8150-l5-so { |
| regulator-name = "pm8150_l5_so"; |
| qcom,set = <RPMH_REGULATOR_SET_SLEEP>; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <880000>; |
| qcom,init-voltage = <880000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| qcom,init-enable = <0>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa6"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| L6A: pm8150_l6: regulator-pm8150-l6 { |
| regulator-name = "pm8150_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L7A: pm8150_l7: regulator-pm8150-l7 { |
| regulator-name = "pm8150_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa9 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa9"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| proxy-supply = <&pm8150_l9>; |
| L9A: pm8150_l9: regulator-pm8150-l9 { |
| regulator-name = "pm8150_l9"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_HPM>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <100000>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L10A: pm8150_l10: regulator-pm8150-l10 { |
| regulator-name = "pm8150_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* PM8150 L11 = VDD_SSC_CX supply */ |
| rpmh-regulator-lcxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "lcx.lvl"; |
| L11A_LEVEL: pm8150_l11_level: regulator-pm8150-l11-level { |
| regulator-name = "pm8150_l11_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa12 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa12"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L12A: pm8150_l12: regulator-pm8150-l12 { |
| regulator-name = "pm8150_l12"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| L12A_AO: pm8150_l12_ao: regulator-pm8150-l12-ao { |
| regulator-name = "pm8150_l12_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| regulator-pm8150-l12-so { |
| regulator-name = "pm8150_l12_so"; |
| qcom,set = <RPMH_REGULATOR_SET_SLEEP>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| qcom,init-enable = <0>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa13 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa13"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L13A: pm8150_l13: regulator-pm8150-l13 { |
| regulator-name = "pm8150_l13"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3008000>; |
| qcom,init-voltage = <3008000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa14 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa14"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| proxy-supply = <&pm8150_l14>; |
| L14A: pm8150_l14: regulator-pm8150-l14 { |
| regulator-name = "pm8150_l14"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <62000>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1880000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa15 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa15"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L15A: pm8150_l15: regulator-pm8150-l15 { |
| regulator-name = "pm8150_l15"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa16 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa16"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L16A: pm8150_l16: regulator-pm8150-l16 { |
| regulator-name = "pm8150_l16"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3024000>; |
| regulator-max-microvolt = <3304000>; |
| qcom,init-voltage = <3024000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa17 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa17"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L17A: pm8150_l17: regulator-pm8150-l17 { |
| regulator-name = "pm8150_l17"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2496000>; |
| regulator-max-microvolt = <3008000>; |
| qcom,init-voltage = <2496000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa18 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa18"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| L18A: pm8150_l18: regulator-pm8150-l18 { |
| regulator-name = "pm8150_l18"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <920000>; |
| qcom,init-voltage = <800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* PM8150A S1 + S2 = VDD_GFX supply */ |
| rpmh-regulator-gfxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "gfx.lvl"; |
| VDD_GFX_LEVEL: S1C_LEVEL: |
| pm8150a_s1_level: regulator-pm8150a-s1-level { |
| regulator-name = "pm8150a_s1_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| /* PM8150A S4 + S5 = VDD_MMCX supply */ |
| rpmh-regulator-mmcxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "mmcx.lvl"; |
| pm8150a_s4_level-parent-supply = <&VDD_MX_MMCX_SUPPLY_LEVEL>; |
| pm8150a_s4_level_ao-parent-supply = <&VDD_MX_LEVEL_AO>; |
| proxy-supply = <&VDD_MMCX_LEVEL>; |
| |
| VDD_MMCX_LEVEL: S4C_LEVEL: |
| pm8150a_s4_level: regulator-pm8150a-s4-level { |
| regulator-name = "pm8150a_s4_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-voltage |
| = <RPMH_REGULATOR_LEVEL_TURBO |
| RPMH_REGULATOR_LEVEL_MAX>; |
| }; |
| |
| VDD_MMCX_LEVEL_AO: S4C_LEVEL_AO: |
| pm8150a_s4_level_ao: regulator-pm8150a-s4-level-ao { |
| regulator-name = "pm8150a_s4_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| regulator-pm8150a-s4-level-so { |
| regulator-name = "pm8150a_s4_level_so"; |
| qcom,set = <RPMH_REGULATOR_SET_SLEEP>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| }; |
| |
| /* PM8150A S6 = VDD_EBI supply */ |
| rpmh-regulator-ebilvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "ebi.lvl"; |
| S6C_LEVEL: pm8150a_s6_level: regulator-pm8150a-s6-level { |
| regulator-name = "pm8150a_s6_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpc7"; |
| S7C: pm8150a_s7: regulator-pm8150a-s7 { |
| regulator-name = "pm8150a_s7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <348000>; |
| regulator-max-microvolt = <1000000>; |
| qcom,init-voltage = <348000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpc8"; |
| qcom,regulator-type = "pmic5-hfsmps"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_RET |
| RPMH_REGULATOR_MODE_AUTO>; |
| qcom,mode-threshold-currents = <0 200000>; |
| S8C: pm8150a_s8: regulator-pm8150a-s8 { |
| regulator-name = "pm8150a_s8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1400000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_RET>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc1"; |
| qcom,regulator-type = "pmic5-ldo"; |
| L1C: pm8150a_l1: regulator-pm8150a-l1 { |
| regulator-name = "pm8150a_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| L2C: pm8150a_l2: regulator-pm8150a-l2 { |
| regulator-name = "pm8150a_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1304000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc3"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| L3C: pm8150a_l3: regulator-pm8150a-l3 { |
| regulator-name = "pm8150a_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc4"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L4C: pm8150a_l4: regulator-pm8150a-l4 { |
| regulator-name = "pm8150a_l4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L5C: pm8150a_l5: regulator-pm8150a-l5 { |
| regulator-name = "pm8150a_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc6"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L6C: pm8150a_l6: regulator-pm8150a-l6 { |
| regulator-name = "pm8150a_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L7C: pm8150a_l7: regulator-pm8150a-l7 { |
| regulator-name = "pm8150a_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2856000>; |
| regulator-max-microvolt = <3104000>; |
| qcom,init-voltage = <2856000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc8"; |
| qcom,regulator-type = "pmic5-ldo"; |
| L8C: pm8150a_l8: regulator-pm8150a-l8 { |
| regulator-name = "pm8150a_l8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc9 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc9"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L9C: pm8150a_l9: regulator-pm8150a-l9 { |
| regulator-name = "pm8150a_l9"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <2704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L10C: pm8150a_l10: regulator-pm8150a-l10 { |
| regulator-name = "pm8150a_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3312000>; |
| qcom,init-voltage = <3000000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc11 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc11"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| proxy-supply = <&pm8150a_l11>; |
| L11C: pm8150a_l11: regulator-pm8150a-l11 { |
| regulator-name = "pm8150a_l11"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <857000>; |
| regulator-min-microvolt = <3104000>; |
| regulator-max-microvolt = <3304000>; |
| qcom,init-voltage = <3104000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-bobc1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "bobc1"; |
| qcom,regulator-type = "pmic5-bob"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_PASS |
| RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1000000 2000000>; |
| qcom,send-defaults; |
| |
| BOB: pm8150a_bob: regulator-pm8150a-bob { |
| regulator-name = "pm8150a_bob"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3960000>; |
| qcom,init-voltage = <3312000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_PASS>; |
| }; |
| |
| BOB_AO: pm8150a_bob_ao: regulator-pm8150a-bob-ao { |
| regulator-name = "pm8150a_bob_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3960000>; |
| qcom,init-voltage = <3008000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| }; |
| }; |
| |
| rpmh-regulator-smpf1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpf1"; |
| S1F: pm8009_s1: regulator-pm8009-s1 { |
| regulator-name = "pm8009_s1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpf2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpf2"; |
| S2F: pm8009_s2: regulator-pm8009-s2 { |
| regulator-name = "pm8009_s2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <512000>; |
| regulator-max-microvolt = <1100000>; |
| qcom,init-voltage = <512000>; |
| }; |
| }; |
| |
| rpmh-regulator-ldof1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldof1"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| L1F: pm8009_l1: regulator-pm8009-l1 { |
| regulator-name = "pm8009_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1104000>; |
| regulator-max-microvolt = <1104000>; |
| qcom,init-voltage = <1104000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldof2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldof2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| L2F: pm8009_l2: regulator-pm8009-l2 { |
| regulator-name = "pm8009_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldof3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldof3"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 30000>; |
| L3F: pm8009_l3: regulator-pm8009-l3 { |
| regulator-name = "pm8009_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1056000>; |
| regulator-max-microvolt = <1056000>; |
| qcom,init-voltage = <1056000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldof5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldof5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L5F: pm8009_l5: regulator-pm8009-l5 { |
| regulator-name = "pm8009_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3000000>; |
| qcom,init-voltage = <2800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldof6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldof6"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L6F: pm8009_l6: regulator-pm8009-l6 { |
| regulator-name = "pm8009_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3000000>; |
| qcom,init-voltage = <2800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldof7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldof7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| L7F: pm8009_l7: regulator-pm8009-l7 { |
| regulator-name = "pm8009_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| }; |
| }; |
| }; |
| |
| &soc { |
| refgen: refgen-regulator@88e7000 { |
| compatible = "qcom,refgen-kona-regulator"; |
| reg = <0x88e7000 0x84>; |
| regulator-name = "refgen"; |
| regulator-enable-ramp-delay = <5>; |
| proxy-supply = <&refgen>; |
| qcom,proxy-consumer-enable; |
| }; |
| }; |